Merge branch 'master' into custom-esp32

* Make sure to call randomSeed() on esp32

* Randomize the top 22 bits of the Message ID

* Make it clear that we are not calling randomSeed() on purpose

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

.gitattributes

@@ -0,0 +1,4 @@
+* text=auto eol=lf
+*.{cmd,[cC][mM][dD]} text eol=crlf
+*.{bat,[bB][aA][tT]} text eol=crlf
+*.{sh,[sS][hH]} text eol=lf

.github/ISSUE_TEMPLATE/Bug Report.yml

@@ -0,0 +1,85 @@
+name: Bug Report
+description: File a bug report
+title: "[Bug]: "
+labels: ["bug", "triage"]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Thanks for taking the time to fill out this bug report!
+
+  - type: dropdown
+    id: category
+    attributes:
+      label: Category
+      description: How would you catagorize this issue?
+      multiple: true
+      options:
+        - Hardware Compatibility
+        - BLE
+        - Serial
+        - WiFi
+        - Other
+    validations:
+      required: true
+
+  - type: dropdown
+    id: hardware
+    attributes:
+      label: Hardware
+      description: What hardware are you encountering this issue on?
+      multiple: true
+      options:
+        - Not Applicable
+        - T-Beam
+        - T-Beam S3
+        - T-Beam 0.7
+        - T-Lora v1
+        - T-Lora v1.3
+        - T-Lora v2 1.6
+        - T-Deck
+        - T-Echo
+        - T-Watch
+        - Rak4631
+        - Rak11200
+        - Rak11310
+        - Heltec v1
+        - Heltec v2
+        - Heltec v2.1
+        - Heltec V3
+        - Heltec Wireless Paper
+        - Heltec Wireless Tracker
+        - Raspberry Pi Pico (W)
+        - Relay v1
+        - Relay v2
+        - Seeed Wio Tracker 1110
+        - DIY
+        - Other
+    validations:
+      required: true
+
+  - type: input
+    id: version
+    attributes:
+      label: Firmware Version
+      description: This can be found on the device's screen or via one of the apps.
+      placeholder: x.x.x.yyyyyyy
+    validations:
+      required: true
+
+  - type: textarea
+    id: body
+    attributes:
+      label: Description
+      description: Please provide details on what steps you performed for this to happen.
+    validations:
+      required: true
+
+  - type: textarea
+    id: logs
+    attributes:
+      label: Relevant log output
+      description: If you have any log output to help in diagnosing your bug, please provide it here.
+      render: Shell
+    validations:
+      required: false

.github/ISSUE_TEMPLATE/New Board.yml

@@ -0,0 +1,46 @@
+name: New Board
+description: Request us to support new hardware
+title: "[Board]: "
+labels: ["enhancement", "triage"]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Thanks for requesting a new board, this will not gurantee that we will support it, but will be on our radar.
+
+  - type: dropdown
+    id: soc
+    attributes:
+      label: SOC
+      description: What SOC does your board have?
+      multiple: true
+      options:
+        - NRF52
+        - ESP32
+        - Other
+    validations:
+      required: true
+
+  - type: input
+    id: lora
+    attributes:
+      label: Lora IC
+      description: What LoRa IC does the board have?
+    validations:
+      required: true
+
+  - type: input
+    id: link
+    attributes:
+      label: Product Link
+      description: Where can we find this product?
+    validations:
+      required: true
+
+  - type: textarea
+    id: body
+    attributes:
+      label: Description
+      description: Please provide any further details you think we may need.
+    validations:
+      required: true

.github/ISSUE_TEMPLATE/feature.yml

@@ -0,0 +1,30 @@
+name: Feature Request
+description: Request a new feature
+title: "[Feature Request]: "
+labels: ["enhancement"]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Thanks for your request this will not gurantee that we will implement it, but it will be reviewed.
+  - type: dropdown
+    id: soc
+    attributes:
+      label: Platform
+      description: What device platform will support your feature?
+      multiple: true
+      options:
+        - NRF52
+        - ESP32
+        - RP2040
+        - Linux Native
+        - other
+    validations:
+      required: true
+  - type: textarea
+    id: body
+    attributes:
+      label: Description
+      description: Please provide details about your enhancement.
+    validations:
+      required: true

.github/actions/setup-base/action.yml

@@ -0,0 +1,42 @@
+name: "Setup Build Base Composite Action"
+description: "Base build actions for Meshtastic Platform IO steps"
+
+runs:
+  using: "composite"
+  steps:
+    - name: Checkout code
+      uses: actions/checkout@v4
+      with:
+        submodules: "recursive"
+        ref: ${{github.event.pull_request.head.ref}}
+        repository: ${{github.event.pull_request.head.repo.full_name}}
+
+    - name: Install dependencies 
+      shell: bash
+      run: |
+        sudo apt-get -y update --fix-missing
+        sudo apt-get install -y cppcheck libbluetooth-dev libgpiod-dev libyaml-cpp-dev
+
+    - name: Setup Python
+      uses: actions/setup-python@v5
+      with:
+        python-version: 3.x
+
+    - name: Cache python libs
+      uses: actions/cache@v4
+      id: cache-pip # needed in if test
+      with:
+        path: ~/.cache/pip
+        key: ${{ runner.os }}-pip
+
+    - name: Upgrade python tools
+      shell: bash
+      run: |
+        python -m pip install --upgrade pip
+        pip install -U platformio adafruit-nrfutil
+        pip install -U meshtastic --pre
+
+    - name: Upgrade platformio
+      shell: bash
+      run: |
+        pio upgrade

.github/pull_request_template.md

@@ -0,0 +1,14 @@
+## Thank you for sending in a pull request, here's some tips to get started!
+
+(Please delete all these tips and replace with your text)
+
+- Before starting on some new big chunk of code, it it is optional but highly recommended to open an issue first
+  to say "hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
+  is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
+- Please do not check in files that don't have real changes
+- Please do not reformat lines that you didn't have to change the code on
+- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor along with the ['Trunk Check' extension](https://marketplace.visualstudio.com/items?itemName=trunk.io) (In beta for windows, WSL2 for the linux version),
+  because it automatically follows our indentation rules and its auto reformatting will not cause spurious changes to lines.
+- If your PR fixes a bug, mention "fixes #bugnum" somewhere in your pull request description.
+- If your other co-developers have comments on your PR please tweak as needed.
+- Please also enable "Allow edits by maintainers".

.github/workflows/build_esp32.yml

@@ -0,0 +1,63 @@
+name: Build ESP32
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+jobs:
+  build-esp32:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
+
+      - name: Pull web ui
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Unpack web ui
+        run: |
+          tar -xf build.tar -C data/static
+          rm build.tar
+
+      - name: Remove debug flags for release
+        if: ${{ github.event_name == 'workflow_dispatch' }}
+        run: |
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
+
+      - name: Build ESP32
+        run: bin/build-esp32.sh ${{ inputs.board }}
+
+      - name: Pull OTA Firmware
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: meshtastic/firmware-ota
+          file: firmware.bin
+          target: release/bleota.bin
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Get release version string
+        shell: bash
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
+            release/*.bin
+            release/*.elf

.github/workflows/build_esp32_c3.yml

@@ -0,0 +1,63 @@
+name: Build ESP32-C3
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-esp32-c3:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
+
+      - name: Pull web ui
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Unpack web ui
+        run: |
+          tar -xf build.tar -C data/static
+          rm build.tar
+      - name: Remove debug flags for release
+        if: ${{ github.event_name == 'workflow_dispatch' }}
+        run: |
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
+      - name: Build ESP32
+        run: bin/build-esp32.sh ${{ inputs.board }}
+
+      - name: Pull OTA Firmware
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: meshtastic/firmware-ota
+          file: firmware-c3.bin
+          target: release/bleota-c3.bin
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Get release version string
+        shell: bash
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
+            release/*.bin
+            release/*.elf

.github/workflows/build_esp32_s3.yml

@@ -0,0 +1,61 @@
+name: Build ESP32-S3
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+jobs:
+  build-esp32-s3:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
+
+      - name: Pull web ui
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Unpack web ui
+        run: |
+          tar -xf build.tar -C data/static
+          rm build.tar
+      - name: Remove debug flags for release
+        if: ${{ github.event_name == 'workflow_dispatch' }}
+        run: |
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
+      - name: Build ESP32
+        run: bin/build-esp32.sh ${{ inputs.board }}
+
+      - name: Pull OTA Firmware
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: meshtastic/firmware-ota
+          file: firmware-s3.bin
+          target: release/bleota-s3.bin
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Get release version string
+        shell: bash
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
+            release/*.bin
+            release/*.elf

.github/workflows/build_native.yml

@@ -0,0 +1,85 @@
+name: Build Native
+
+on: workflow_call
+
+permissions:
+  contents: write
+  packages: write
+
+jobs:
+  build-native:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Install libbluetooth
+        shell: bash
+        run: |
+          sudo apt-get update --fix-missing
+          sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
+
+      - name: Checkout code
+        uses: actions/checkout@v4
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Upgrade python tools
+        shell: bash
+        run: |
+          python -m pip install --upgrade pip
+          pip install -U platformio adafruit-nrfutil
+          pip install -U meshtastic --pre
+
+      - name: Upgrade platformio
+        shell: bash
+        run: |
+          pio upgrade
+
+      - name: Build Native
+        run: bin/build-native.sh
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-native-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
+            release/meshtasticd_linux_x86_64
+            bin/config-dist.yaml
+
+      - name: Docker login
+        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
+        uses: docker/login-action@v3
+        continue-on-error: true # FIXME: Failing docker login auth
+        with:
+          username: meshtastic
+          password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }}
+
+      - name: Docker setup
+        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
+        continue-on-error: true # FIXME: Failing docker login auth
+        uses: docker/setup-buildx-action@v3
+
+      - name: Docker build and push tagged versions
+        if: ${{ github.event_name == 'workflow_dispatch' }}
+        continue-on-error: true # FIXME: Failing docker login auth
+        uses: docker/build-push-action@v5
+        with:
+          context: .
+          file: ./Dockerfile
+          push: true
+          tags: meshtastic/device-simulator:${{ steps.version.outputs.version }}
+
+      - name: Docker build and push
+        if: ${{ github.ref == 'refs/heads/master' && github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
+        continue-on-error: true # FIXME: Failing docker login auth
+        uses: docker/build-push-action@v5
+        with:
+          context: .
+          file: ./Dockerfile
+          push: true
+          tags: meshtastic/device-simulator:latest

.github/workflows/build_nrf52.yml

@@ -0,0 +1,35 @@
+name: Build NRF52
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+jobs:
+  build-nrf52:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
+
+      - name: Build NRF52
+        run: bin/build-nrf52.sh ${{ inputs.board }}
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
+            release/*.hex
+            release/*.uf2
+            release/*.elf
+            release/*.zip

.github/workflows/build_raspbian.yml

@@ -0,0 +1,52 @@
+name: Build Raspbian
+
+on: workflow_call
+
+permissions:
+  contents: write
+  packages: write
+
+jobs:
+  build-raspbian:
+    runs-on: [self-hosted, linux, ARM64]
+    steps:
+      - name: Install libbluetooth
+        shell: bash
+        run: |
+          apt-get update -y --fix-missing
+          apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
+
+      - name: Checkout code
+        uses: actions/checkout@v4
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Upgrade python tools
+        shell: bash
+        run: |
+          python -m pip install --upgrade pip
+          pip install -U platformio adafruit-nrfutil
+          pip install -U meshtastic --pre
+
+      - name: Upgrade platformio
+        shell: bash
+        run: |
+          pio upgrade
+
+      - name: Build Raspbian
+        run: bin/build-native.sh
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-raspbian-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
+            release/meshtasticd_linux_aarch64
+            bin/config-dist.yaml

.github/workflows/build_raspbian_armv7l.yml

@@ -0,0 +1,52 @@
+name: Build Raspbian Arm
+
+on: workflow_call
+
+permissions:
+  contents: write
+  packages: write
+
+jobs:
+  build-raspbian-armv7l:
+    runs-on: [self-hosted, linux, ARM]
+    steps:
+      - name: Install libbluetooth
+        shell: bash
+        run: |
+          apt-get update -y --fix-missing
+          apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
+
+      - name: Checkout code
+        uses: actions/checkout@v4
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Upgrade python tools
+        shell: bash
+        run: |
+          python -m pip install --upgrade pip
+          pip install -U platformio adafruit-nrfutil
+          pip install -U meshtastic --pre
+
+      - name: Upgrade platformio
+        shell: bash
+        run: |
+          pio upgrade
+
+      - name: Build Raspbian
+        run: bin/build-native.sh
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-raspbian-armv7l-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
+            release/meshtasticd_linux_armv7l
+            bin/config-dist.yaml

.github/workflows/build_rpi2040.yml

@@ -0,0 +1,33 @@
+name: Build RPI2040
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+jobs:
+  build-rpi2040:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
+
+      - name: Build Raspberry Pi 2040
+        run: ./bin/build-rpi2040.sh ${{ inputs.board }}
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
+            release/*.uf2
+            release/*.elf

.github/workflows/main.yml

@@ -1,21 +0,0 @@
-name: Continuous Integration
-on:
-  - push
-  - pull_request
-
-jobs:
-  main:
-    name: Main
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@master
-      - name: Setup Python
-        uses: actions/setup-python@master
-        with:
-          python-version: 3.x
-      - name: Install Platform IO
-        run: |
-          python -m pip install --upgrade pip
-          pip install -U platformio
-      - name: Build
-        run: platformio run

.github/workflows/main_matrix.yml

@@ -0,0 +1,344 @@
+name: CI
+#concurrency:
+#  group: ${{ github.ref }}
+#  cancel-in-progress: ${{ github.ref != 'refs/heads/master' }}
+on:
+  # # Triggers the workflow on push but only for the master branch
+  push:
+    branches: [master, develop]
+    paths-ignore:
+      - "**.md"
+      - version.properties
+
+  # Note: This is different from "pull_request". Need to specify ref when doing checkouts.
+  pull_request_target:
+    branches: [master, develop]
+    paths-ignore:
+      - "**.md"
+      #- "**.yml"
+
+  workflow_dispatch:
+
+jobs:
+  setup:
+    strategy:
+      fail-fast: false
+      matrix:
+        arch: [esp32, esp32s3, esp32c3, nrf52840, rp2040, check]
+    runs-on: ubuntu-latest
+    steps:
+      - id: checkout
+        uses: actions/checkout@v4
+        name: Checkout base
+      - id: jsonStep
+        run: |
+          TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
+          echo "$TARGETS"
+          echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
+    outputs:
+      esp32: ${{ steps.jsonStep.outputs.esp32 }}
+      esp32s3: ${{ steps.jsonStep.outputs.esp32s3 }}
+      esp32c3: ${{ steps.jsonStep.outputs.esp32c3 }}
+      nrf52840: ${{ steps.jsonStep.outputs.nrf52840 }}
+      rp2040: ${{ steps.jsonStep.outputs.rp2040 }}
+      check: ${{ steps.jsonStep.outputs.check }}
+
+  check:
+    needs: setup
+    strategy:
+      fail-fast: false
+      matrix: ${{ fromJson(needs.setup.outputs.check) }}
+
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
+      - name: Check ${{ matrix.board }}
+        run: bin/check-all.sh ${{ matrix.board }}
+
+  build-esp32:
+    needs: setup
+    strategy:
+      fail-fast: false
+      matrix: ${{ fromJson(needs.setup.outputs.esp32) }}
+    uses: ./.github/workflows/build_esp32.yml
+    with:
+      board: ${{ matrix.board }}
+
+  build-esp32-s3:
+    needs: setup
+    strategy:
+      fail-fast: false
+      matrix: ${{ fromJson(needs.setup.outputs.esp32s3) }}
+    uses: ./.github/workflows/build_esp32_s3.yml
+    with:
+      board: ${{ matrix.board }}
+
+  build-esp32-c3:
+    needs: setup
+    strategy:
+      fail-fast: false
+      matrix: ${{ fromJson(needs.setup.outputs.esp32c3) }}
+    uses: ./.github/workflows/build_esp32_c3.yml
+    with:
+      board: ${{ matrix.board }}
+
+  build-nrf52:
+    needs: setup
+    strategy:
+      fail-fast: false
+      matrix: ${{ fromJson(needs.setup.outputs.nrf52840) }}
+    uses: ./.github/workflows/build_nrf52.yml
+    with:
+      board: ${{ matrix.board }}
+
+  build-rpi2040:
+    needs: setup
+    strategy:
+      fail-fast: false
+      matrix: ${{ fromJson(needs.setup.outputs.rp2040) }}
+    uses: ./.github/workflows/build_rpi2040.yml
+    with:
+      board: ${{ matrix.board }}
+
+  package-raspbian:
+    uses: ./.github/workflows/package_raspbian.yml
+
+  package-raspbian-armv7l:
+    uses: ./.github/workflows/package_raspbian_armv7l.yml
+
+  package-native:
+    uses: ./.github/workflows/package_amd64.yml
+
+  after-checks:
+    runs-on: ubuntu-latest
+    needs: [check]
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v4
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+  gather-artifacts:
+    permissions:
+      contents: write
+      pull-requests: write
+    runs-on: ubuntu-latest
+    needs:
+      [
+        build-esp32,
+        build-esp32-s3,
+        build-esp32-c3,
+        build-nrf52,
+        build-rpi2040,
+        package-raspbian,
+        package-raspbian-armv7l,
+        package-native,
+      ]
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v4
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - uses: actions/download-artifact@v4
+        with:
+          path: ./
+          merge-multiple: true
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Move files up
+        run: mv -b -t ./ ./release/meshtasticd_linux_* ./bin/config-dist.yaml ./bin/device-*.sh ./bin/device-*.bat
+
+      - name: Repackage in single firmware zip
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-${{ steps.version.outputs.version }}
+          overwrite: true
+          path: |
+            ./firmware-*.bin
+            ./firmware-*.uf2
+            ./firmware-*.hex
+            ./firmware-*-ota.zip
+            ./device-*.sh
+            ./device-*.bat
+            ./meshtasticd_linux_*
+            ./config-dist.yaml
+            ./littlefs-*.bin
+            ./bleota*bin
+            ./Meshtastic_nRF52_factory_erase*.uf2
+          retention-days: 90
+
+      - uses: actions/download-artifact@v4
+        with:
+          name: firmware-${{ steps.version.outputs.version }}
+          merge-multiple: true
+          path: ./output
+
+      # For diagnostics
+      - name: Show artifacts
+        run: ls -lR
+
+      - name: Device scripts permissions
+        run: |
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
+
+      - name: Zip firmware
+        run: zip -j -9 -r ./firmware-${{ steps.version.outputs.version }}.zip ./output
+
+      - name: Repackage in single elfs zip
+        uses: actions/upload-artifact@v4
+        with:
+          name: debug-elfs-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: ./*.elf
+          retention-days: 30
+
+      - name: Create request artifacts
+        continue-on-error: true # FIXME: Why are we getting 502, but things still work?
+        if: ${{ github.event_name == 'pull_request_target' || github.event_name == 'pull_request' }}
+        uses: gavv/pull-request-artifacts@v2.1.0
+        with:
+          commit: ${{ (github.event.pull_request_target || github.event.pull_request).head.sha }}
+          repo-token: ${{ secrets.GITHUB_TOKEN }}
+          artifacts-token: ${{ secrets.ARTIFACTS_TOKEN }}
+          artifacts-repo: meshtastic/artifacts
+          artifacts-branch: device
+          artifacts: ./firmware-${{ steps.version.outputs.version }}.zip
+
+  release-artifacts:
+    runs-on: ubuntu-latest
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    needs: [gather-artifacts, after-checks]
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+
+      - name: Setup Python
+        uses: actions/setup-python@v5
+        with:
+          python-version: 3.x
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - uses: actions/download-artifact@v4
+        with:
+          name: firmware-${{ steps.version.outputs.version }}
+          merge-multiple: true
+          path: ./output
+
+      - uses: actions/download-artifact@v4
+        with:
+          pattern: meshtasticd_${{ steps.version.outputs.version }}_*.deb
+          merge-multiple: true
+          path: ./output
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: Device scripts permissions
+        run: |
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
+
+      - name: Zip firmware
+        run: zip -j -9 -r ./firmware-${{ steps.version.outputs.version }}.zip ./output -x *.deb
+
+      - uses: actions/download-artifact@v4
+        with:
+          name: debug-elfs-${{ steps.version.outputs.version }}.zip
+          merge-multiple: true
+          path: ./elfs
+
+      - name: Zip Elfs
+        run: zip -j -9 -r ./debug-elfs-${{ steps.version.outputs.version }}.zip ./elfs
+
+      # For diagnostics
+      - name: Show artifacts
+        run: ls -lR
+
+      - name: Create release
+        uses: actions/create-release@v1
+        id: create_release
+        with:
+          draft: true
+          prerelease: true
+          release_name: Meshtastic Firmware ${{ steps.version.outputs.version }} Alpha
+          tag_name: v${{ steps.version.outputs.version }}
+          body: |
+            Autogenerated by github action, developer should edit as required before publishing...
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+
+      - name: Add bins to release
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./firmware-${{ steps.version.outputs.version }}.zip
+          asset_name: firmware-${{ steps.version.outputs.version }}.zip
+          asset_content_type: application/zip
+
+      - name: Add debug elfs to release
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./debug-elfs-${{ steps.version.outputs.version }}.zip
+          asset_name: debug-elfs-${{ steps.version.outputs.version }}.zip
+          asset_content_type: application/zip
+
+      - name: Add raspbian aarch64 .deb
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./output/meshtasticd_${{ steps.version.outputs.version }}_arm64.deb
+          asset_name: meshtasticd_${{ steps.version.outputs.version }}_arm64.deb
+          asset_content_type: application/vnd.debian.binary-package
+
+      - name: Add raspbian armv7l .deb
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./output/meshtasticd_${{ steps.version.outputs.version }}_armhf.deb
+          asset_name: meshtasticd_${{ steps.version.outputs.version }}_armhf.deb
+          asset_content_type: application/vnd.debian.binary-package
+
+      - name: Add raspbian amd64 .deb
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./output/meshtasticd_${{ steps.version.outputs.version }}_amd64.deb
+          asset_name: meshtasticd_${{ steps.version.outputs.version }}_amd64.deb
+          asset_content_type: application/vnd.debian.binary-package
+
+      - name: Bump version.properties
+        run: >-
+          bin/bump_version.py
+
+      - name: Create version.properties pull request
+        uses: peter-evans/create-pull-request@v6
+        with:
+          add-paths: |
+            version.properties

.github/workflows/nightly.yml

@@ -0,0 +1,19 @@
+name: Nightly
+on:
+  schedule:
+    - cron: 0 8 * * 1-5
+  workflow_dispatch: {}
+
+jobs:
+  trunk_check:
+    name: Trunk Check Upload
+    runs-on: ubuntu-latest
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+
+      - name: Trunk Check
+        uses: trunk-io/trunk-action@782e83f803ca6e369f035d64c6ba2768174ba61b
+        with:
+          trunk-token: ${{ secrets.TRUNK_TOKEN }}

.github/workflows/package_amd64.yml

@@ -0,0 +1,78 @@
+name: Package Native
+
+on:
+  workflow_call:
+  workflow_dispatch:
+
+permissions:
+  contents: write
+  packages: write
+
+jobs:
+  build-native:
+    uses: ./.github/workflows/build_native.yml
+
+  package-native:
+    runs-on: ubuntu-latest
+    needs: build-native
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v4
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Pull web ui
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Download artifacts
+        uses: actions/download-artifact@v4
+        with:
+          name: firmware-native-${{ steps.version.outputs.version }}.zip
+          merge-multiple: true
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: build .debpkg
+        run: |
+          mkdir -p .debpkg/DEBIAN
+          mkdir -p .debpkg/usr/share/doc/meshtasticd/web
+          mkdir -p .debpkg/usr/sbin
+          mkdir -p .debpkg/etc/meshtasticd
+          mkdir -p .debpkg/usr/lib/systemd/system/
+          tar -xf build.tar -C .debpkg/usr/share/doc/meshtasticd/web
+          gunzip .debpkg/usr/share/doc/meshtasticd/web/*.gz
+          cp release/meshtasticd_linux_x86_64 .debpkg/usr/sbin/meshtasticd
+          cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
+          chmod +x .debpkg/usr/sbin/meshtasticd
+          cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
+          echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles
+          chmod +x .debpkg/DEBIAN/conffiles
+
+      - uses: jiro4989/build-deb-action@v3
+        with:
+          package: meshtasticd
+          package_root: .debpkg
+          maintainer: Jonathan Bennett
+          version: ${{ steps.version.outputs.version }} # refs/tags/v*.*.*
+          arch: amd64
+          depends: libyaml-cpp0.7, openssl, libulfius2.7
+          desc: Native Linux Meshtastic binary.
+
+      - uses: actions/upload-artifact@v4
+        with:
+          name: meshtasticd_${{ steps.version.outputs.version }}_amd64.deb
+          overwrite: true
+          path: |
+            ./*.deb

.github/workflows/package_raspbian.yml

@@ -0,0 +1,78 @@
+name: Package Raspbian
+
+on:
+  workflow_call:
+  workflow_dispatch:
+
+permissions:
+  contents: write
+  packages: write
+
+jobs:
+  build-raspbian:
+    uses: ./.github/workflows/build_raspbian.yml
+
+  package-raspbian:
+    runs-on: ubuntu-latest
+    needs: build-raspbian
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v4
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Pull web ui
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Download artifacts
+        uses: actions/download-artifact@v4
+        with:
+          name: firmware-raspbian-${{ steps.version.outputs.version }}.zip
+          merge-multiple: true
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: build .debpkg
+        run: |
+          mkdir -p .debpkg/DEBIAN
+          mkdir -p .debpkg/usr/share/doc/meshtasticd/web
+          mkdir -p .debpkg/usr/sbin
+          mkdir -p .debpkg/etc/meshtasticd
+          mkdir -p .debpkg/usr/lib/systemd/system/
+          tar -xf build.tar -C .debpkg/usr/share/doc/meshtasticd/web
+          gunzip .debpkg/usr/share/doc/meshtasticd/web/*.gz
+          cp release/meshtasticd_linux_aarch64 .debpkg/usr/sbin/meshtasticd
+          cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
+          chmod +x .debpkg/usr/sbin/meshtasticd
+          cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
+          echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles
+          chmod +x .debpkg/DEBIAN/conffiles
+
+      - uses: jiro4989/build-deb-action@v3
+        with:
+          package: meshtasticd
+          package_root: .debpkg
+          maintainer: Jonathan Bennett
+          version: ${{ steps.version.outputs.version }} # refs/tags/v*.*.*
+          arch: arm64
+          depends: libyaml-cpp0.7, openssl, libulfius2.7
+          desc: Native Linux Meshtastic binary.
+
+      - uses: actions/upload-artifact@v4
+        with:
+          name: meshtasticd_${{ steps.version.outputs.version }}_arm64.deb
+          overwrite: true
+          path: |
+            ./*.deb

.github/workflows/package_raspbian_armv7l.yml

@@ -0,0 +1,78 @@
+name: Package Raspbian
+
+on:
+  workflow_call:
+  workflow_dispatch:
+
+permissions:
+  contents: write
+  packages: write
+
+jobs:
+  build-raspbian_armv7l:
+    uses: ./.github/workflows/build_raspbian_armv7l.yml
+
+  package-raspbian_armv7l:
+    runs-on: ubuntu-latest
+    needs: build-raspbian_armv7l
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v4
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Pull web ui
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Download artifacts
+        uses: actions/download-artifact@v4
+        with:
+          name: firmware-raspbian-armv7l-${{ steps.version.outputs.version }}.zip
+          merge-multiple: true
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: build .debpkg
+        run: |
+          mkdir -p .debpkg/DEBIAN
+          mkdir -p .debpkg/usr/share/doc/meshtasticd/web
+          mkdir -p .debpkg/usr/sbin
+          mkdir -p .debpkg/etc/meshtasticd
+          mkdir -p .debpkg/usr/lib/systemd/system/
+          tar -xf build.tar -C .debpkg/usr/share/doc/meshtasticd/web
+          gunzip .debpkg/usr/share/doc/meshtasticd/web/*.gz
+          cp release/meshtasticd_linux_armv7l .debpkg/usr/sbin/meshtasticd
+          cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
+          chmod +x .debpkg/usr/sbin/meshtasticd
+          cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
+          echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles
+          chmod +x .debpkg/DEBIAN/conffiles
+
+      - uses: jiro4989/build-deb-action@v3
+        with:
+          package: meshtasticd
+          package_root: .debpkg
+          maintainer: Jonathan Bennett
+          version: ${{ steps.version.outputs.version }} # refs/tags/v*.*.*
+          arch: armhf
+          depends: libyaml-cpp0.7, openssl, libulfius2.7
+          desc: Native Linux Meshtastic binary.
+
+      - uses: actions/upload-artifact@v4
+        with:
+          name: meshtasticd_${{ steps.version.outputs.version }}_armhf.deb
+          overwrite: true
+          path: |
+            ./*.deb

.github/workflows/sec_sast_flawfinder.yml

@@ -0,0 +1,41 @@
+---
+name: Flawfinder Scan
+
+on:
+  push:
+    branches: [master, develop]
+    paths-ignore:
+      - "**.md"
+      - "version.properties"
+
+jobs:
+  flawfinder:
+    runs-on: ubuntu-latest
+    name: Flawfinder
+
+    steps:
+      # step 1
+      - name: clone application source code
+        uses: actions/checkout@v4
+
+      # step 2
+      - name: flawfinder_scan
+        uses: david-a-wheeler/flawfinder@2.0.19
+        with:
+          arguments: "--sarif ./"
+          output: "flawfinder_report.sarif"
+
+      # step 3
+      - name: save report as pipeline artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: flawfinder_report.sarif
+          overwrite: true
+          path: flawfinder_report.sarif
+
+      # step 4
+      - name: publish code scanning alerts
+        uses: github/codeql-action/upload-sarif@v3
+        with:
+          sarif_file: flawfinder_report.sarif
+          category: flawfinder

.github/workflows/sec_sast_semgrep_cron.yml

@@ -0,0 +1,43 @@
+---
+name: Semgrep Full Scan
+
+on:
+  workflow_dispatch:
+    branches:
+      - master
+  schedule:
+    - cron: "0 1 * * 6"
+
+jobs:
+  semgrep-full:
+    runs-on: ubuntu-latest
+    container:
+      image: returntocorp/semgrep
+
+    steps:
+      # step 1
+      - name: clone application source code
+        uses: actions/checkout@v4
+
+      # step 2
+      - name: full scan
+        run: |
+          semgrep \
+            --sarif --output report.sarif \
+            --metrics=off \
+            --config="p/default"
+
+      # step 3
+      - name: save report as pipeline artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: report.sarif
+          overwrite: true
+          path: report.sarif
+
+      # step 4
+      - name: publish code scanning alerts
+        uses: github/codeql-action/upload-sarif@v3
+        with:
+          sarif_file: report.sarif
+          category: semgrep

.github/workflows/sec_sast_semgrep_pull.yml

@@ -0,0 +1,25 @@
+---
+name: Semgrep Differential Scan
+on: pull_request
+
+jobs:
+  semgrep-diff:
+    runs-on: ubuntu-latest
+    container:
+      image: returntocorp/semgrep
+
+    steps:
+      # step 1
+      - name: clone application source code
+        uses: actions/checkout@v4
+        with:
+          fetch-depth: 0
+
+      # step 2
+      - name: differential scan
+        run: |
+          semgrep scan \
+            --error \
+            --metrics=off \
+            --baseline-commit ${{ github.event.pull_request.base.sha }} \
+            --config="p/default"

.github/workflows/trunk-check.yml

@@ -0,0 +1,22 @@
+name: Pull Request
+on: [pull_request]
+concurrency:
+  group: ${{ github.head_ref || github.run_id }}
+  cancel-in-progress: true
+
+permissions: read-all
+
+jobs:
+  trunk_check:
+    name: Trunk Check Runner
+    runs-on: ubuntu-latest
+    permissions:
+      checks: write # For trunk to post annotations
+      contents: read # For repo checkout
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+
+      - name: Trunk Check
+        uses: trunk-io/trunk-action@v1

.github/workflows/update_protobufs.yml

@@ -0,0 +1,33 @@
+name: "Update protobufs and regenerate classes"
+on: workflow_dispatch
+
+jobs:
+  update-protobufs:
+    runs-on: ubuntu-latest
+
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v4
+        with:
+          submodules: true
+
+      - name: Update submodule
+        run: |
+          git submodule update --remote protobufs
+
+      - name: Download nanopb
+        run: |
+          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.8-linux-x86.tar.gz
+          tar xvzf nanopb-0.4.8-linux-x86.tar.gz
+          mv nanopb-0.4.8-linux-x86 nanopb-0.4.8
+
+      - name: Re-generate protocol buffers
+        run: |
+          ./bin/regen-protos.sh
+
+      - name: Create pull request
+        uses: peter-evans/create-pull-request@v6
+        with:
+          add-paths: |
+            protobufs
+            src/mesh

.gitignore

@@ -7,4 +7,29 @@ main/credentials.h
 !.vscode/settings.json
 !.vscode/tasks.json
 !.vscode/extensions.json
-*.code-workspace
+*.code-workspace
+
+.idea
+
+.DS_Store
+Thumbs.db
+.autotools
+.built
+.context
+.cproject
+.vagrant
+nanopb*
+flash.uf2
+cmake-build*
+__pycache__
+
+*.swp
+*.swo
+*~
+
+venv/
+release/
+.vscode/extensions.json
+/compile_commands.json
+src/mesh/raspihttp/certificate.pem
+src/mesh/raspihttp/private_key.pem

.gitmodules

@@ -1,6 +1,3 @@
-[submodule "proto"]
+[submodule "protobufs"]
-	path = proto
+	path = protobufs
-	url = https://github.com/meshtastic/Meshtastic-protobufs.git
+	url = https://github.com/meshtastic/protobufs.git
-[submodule "sdk-nrfxlib"]
-	path = sdk-nrfxlib
-	url = https://github.com/nrfconnect/sdk-nrfxlib.git

.semgrepignore

@@ -0,0 +1,2 @@
+.github/workflows/main_matrix.yml
+src/mesh/compression/unishox2.cpp

.trunk/.gitignore

@@ -0,0 +1,9 @@
+*out
+*logs
+*actions
+*notifications
+*tools
+plugins
+user_trunk.yaml
+user.yaml
+tmp

.trunk/configs/.bandit

@@ -0,0 +1,2 @@
+[bandit]
+skips = B101

.trunk/configs/.flake8

@@ -0,0 +1,3 @@
+# Autoformatter friendly flake8 config (all formatting rules disabled)
+[flake8]
+extend-ignore = D1, D2, E1, E2, E3, E501, W1, W2, W3, W5

.trunk/configs/.hadolint.yaml

@@ -0,0 +1,4 @@
+# Following source doesn't work in most setups
+ignored:
+  - SC1090
+  - SC1091

.trunk/configs/.isort.cfg

@@ -0,0 +1,2 @@
+[settings]
+profile=black

.trunk/configs/.markdownlint.yaml

@@ -0,0 +1,10 @@
+# Autoformatter friendly markdownlint config (all formatting rules disabled)
+default: true
+blank_lines: false
+bullet: false
+html: false
+indentation: false
+line_length: false
+spaces: false
+url: false
+whitespace: false

.trunk/configs/.shellcheckrc

@@ -0,0 +1,10 @@
+enable=all
+source-path=SCRIPTDIR
+disable=SC2154
+disable=SC2248
+disable=SC2250
+
+# If you're having issues with shellcheck following source, disable the errors via:
+# disable=SC1090
+# disable=SC1091
+# 

.trunk/configs/.yamllint.yaml

@@ -0,0 +1,10 @@
+rules:
+  quoted-strings:
+    required: only-when-needed
+    extra-allowed: ["{|}"]
+  empty-values:
+    forbid-in-block-mappings: false
+    forbid-in-flow-mappings: true
+  key-duplicates: {}
+  octal-values:
+    forbid-implicit-octal: true

.trunk/configs/ruff.toml

@@ -0,0 +1,5 @@
+# Generic, formatter-friendly config.
+select = ["B", "D3", "D4", "E", "F"]
+
+# Never enforce `E501` (line length violations). This should be handled by formatters.
+ignore = ["E501"]

.trunk/configs/svgo.config.js

@@ -0,0 +1,14 @@
+module.exports = {
+  plugins: [
+    {
+      name: "preset-default",
+      params: {
+        overrides: {
+          removeViewBox: false, // https://github.com/svg/svgo/issues/1128
+          sortAttrs: true,
+          removeOffCanvasPaths: true,
+        },
+      },
+    },
+  ],
+};

.trunk/trunk.yaml

@@ -0,0 +1,49 @@
+version: 0.1
+cli:
+  version: 1.22.2
+plugins:
+  sources:
+    - id: trunk
+      ref: v1.5.0
+      uri: https://github.com/trunk-io/plugins
+lint:
+  enabled:
+    - trufflehog@3.76.3
+    - yamllint@1.35.1
+    - bandit@1.7.8
+    - checkov@3.2.95
+    - terrascan@1.19.1
+    - trivy@0.51.1
+    #- trufflehog@3.63.2-rc0
+    - taplo@0.8.1
+    - ruff@0.4.4
+    - isort@5.13.2
+    - markdownlint@0.40.0
+    - oxipng@9.1.1
+    - svgo@3.3.2
+    - actionlint@1.7.0
+    - flake8@7.0.0
+    - hadolint@2.12.0
+    - shfmt@3.6.0
+    - shellcheck@0.10.0
+    - black@24.4.2
+    - git-diff-check
+    - gitleaks@8.18.2
+    - clang-format@16.0.3
+    - prettier@3.2.5
+  ignore:
+    - linters: [ALL]
+      paths:
+        - bin/**
+runtimes:
+  enabled:
+    - python@3.10.8
+    - go@1.21.0
+    - node@18.12.1
+actions:
+  disabled:
+    - trunk-announce
+  enabled:
+    - trunk-fmt-pre-commit
+    - trunk-check-pre-push
+    - trunk-upgrade-available

.vscode/extensions.json

@@ -1,7 +1,9 @@
-{
+{
-    // See http://go.microsoft.com/fwlink/?LinkId=827846
+    // See http://go.microsoft.com/fwlink/?LinkId=827846
-    // for the documentation about the extensions.json format
+    // for the documentation about the extensions.json format
-    "recommendations": [
+    "recommendations": [
-        "platformio.platformio-ide"
+		"ms-vscode.cpptools",
-    ]
+        "platformio.platformio-ide",
-}
+        "trunk.io"
+    ],
+}

.vscode/settings.json

@@ -1,64 +1,11 @@
 {
-    "files.associations": {
+  "editor.formatOnSave": true,
-        "type_traits": "cpp",
+  "editor.defaultFormatter": "trunk.io",
-        "array": "cpp",
+  "trunk.enableWindows": true,
-        "*.tcc": "cpp",
+  "files.insertFinalNewline": false,
-        "cctype": "cpp",
+  "files.trimFinalNewlines": false,
-        "clocale": "cpp",
+  "cmake.configureOnOpen": false,
-        "cmath": "cpp",
+  "[cpp]": {
-        "cstdarg": "cpp",
+    "editor.defaultFormatter": "trunk.io"
-        "cstddef": "cpp",
+  }
-        "cstdint": "cpp",
+}
-        "cstdio": "cpp",
-        "cstdlib": "cpp",
-        "cstring": "cpp",
-        "ctime": "cpp",
-        "cwchar": "cpp",
-        "cwctype": "cpp",
-        "deque": "cpp",
-        "unordered_map": "cpp",
-        "unordered_set": "cpp",
-        "vector": "cpp",
-        "exception": "cpp",
-        "algorithm": "cpp",
-        "functional": "cpp",
-        "system_error": "cpp",
-        "tuple": "cpp",
-        "fstream": "cpp",
-        "initializer_list": "cpp",
-        "iomanip": "cpp",
-        "iosfwd": "cpp",
-        "istream": "cpp",
-        "limits": "cpp",
-        "memory": "cpp",
-        "new": "cpp",
-        "ostream": "cpp",
-        "numeric": "cpp",
-        "sstream": "cpp",
-        "stdexcept": "cpp",
-        "streambuf": "cpp",
-        "cinttypes": "cpp",
-        "utility": "cpp",
-        "typeinfo": "cpp",
-        "string": "cpp",
-        "*.xbm": "cpp",
-        "list": "cpp",
-        "atomic": "cpp",
-        "memory_resource": "cpp",
-        "optional": "cpp",
-        "string_view": "cpp",
-        "cassert": "cpp"
-    },
-    "cSpell.words": [
-        "Blox",
-        "HFSR",
-        "Meshtastic",
-        "NEMAGPS",
-        "Ublox",
-        "bkpt",
-        "cfsr",
-        "descs",
-        "ocrypto",
-        "protobufs"
-    ]
-}

.vscode/tasks.json

@@ -0,0 +1,15 @@
+{
+  "version": "2.0.0",
+  "tasks": [
+    {
+      "type": "PlatformIO",
+      "task": "Build",
+      "problemMatcher": ["$platformio"],
+      "group": {
+        "kind": "build",
+        "isDefault": true
+      },
+      "label": "PlatformIO: Build"
+    }
+  ]
+}

Dockerfile

@@ -0,0 +1,54 @@
+FROM debian:bookworm-slim AS builder
+
+ENV DEBIAN_FRONTEND=noninteractive
+ENV TZ=Etc/UTC
+
+# http://bugs.python.org/issue19846
+# > At the moment, setting "LANG=C" on a Linux system *fundamentally breaks Python 3*, and that's not OK.
+ENV LANG C.UTF-8
+
+# Install build deps
+USER root
+
+# trunk-ignore(terrascan/AC_DOCKER_0002): Known terrascan issue
+# trunk-ignore(hadolint/DL3008): Use latest version of packages for buildchain
+RUN apt-get update && apt-get install --no-install-recommends -y wget python3 python3-pip python3-wheel python3-venv g++ zip git \
+                           ca-certificates libgpiod-dev libyaml-cpp-dev libbluetooth-dev \
+                           libulfius-dev liborcania-dev libssl-dev pkg-config && \
+    apt-get clean && rm -rf /var/lib/apt/lists/* && mkdir /tmp/firmware
+
+RUN groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh && chown mesh:mesh /tmp/firmware
+USER mesh
+
+WORKDIR /tmp/firmware
+RUN python3 -m venv /tmp/firmware 
+RUN bash -o pipefail -c "source bin/activate; pip3 install --no-cache-dir -U platformio==6.1.15"
+# trunk-ignore(terrascan/AC_DOCKER_00024): We would actually like these files to be owned by mesh tyvm
+COPY --chown=mesh:mesh . /tmp/firmware
+RUN bash -o pipefail -c "source ./bin/activate && bash ./bin/build-native.sh"
+RUN cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd"
+
+
+##### PRODUCTION BUILD #############
+
+FROM debian:bookworm-slim
+ENV DEBIAN_FRONTEND=noninteractive
+ENV TZ=Etc/UTC
+
+# trunk-ignore(terrascan/AC_DOCKER_0002): Known terrascan issue
+# trunk-ignore(hadolint/DL3008): Use latest version of packages for buildchain
+RUN apt-get update && apt-get --no-install-recommends -y install libc-bin libc6 libgpiod2 libyaml-cpp0.7 libulfius2.7 liborcania2.3 libssl3 && \
+    apt-get clean && rm -rf /var/lib/apt/lists/*
+
+RUN groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh
+USER mesh
+
+WORKDIR /home/mesh
+COPY --from=builder /tmp/firmware/release/meshtasticd /home/mesh/
+
+RUN mkdir data
+VOLUME /home/mesh/data
+
+CMD [ "sh",  "-cx", "./meshtasticd -d /home/mesh/data --hwid=${HWID:-$RANDOM}" ]
+
+HEALTHCHECK NONE

README.md

@@ -1,194 +1,18 @@
-# Meshtastic-device
+# Meshtastic Firmware
 
-This is the device side code for the [meshtastic.org](https://www.meshtastic.org) project.
+![GitHub release downloads](https://img.shields.io/github/downloads/meshtastic/firmware/total)
+[![CI](https://img.shields.io/github/actions/workflow/status/meshtastic/firmware/main_matrix.yml?branch=master&label=actions&logo=github&color=yellow)](https://github.com/meshtastic/firmware/actions/workflows/ci.yml)
+[![CLA assistant](https://cla-assistant.io/readme/badge/meshtastic/firmware)](https://cla-assistant.io/meshtastic/firmware)
+[![Fiscal Contributors](https://opencollective.com/meshtastic/tiers/badge.svg?label=Fiscal%20Contributors&color=deeppink)](https://opencollective.com/meshtastic/)
+[![Vercel](https://img.shields.io/static/v1?label=Powered%20by&message=Vercel&style=flat&logo=vercel&color=000000)](https://vercel.com?utm_source=meshtastic&utm_campaign=oss)
 
-![Continuous Integration](https://github.com/meshtastic/Meshtastic-esp32/workflows/Continuous%20Integration/badge.svg)
+## Overview
 
-Meshtastic™ is a project that lets you use
+This repository contains the device firmware for the Meshtastic project.
-inexpensive GPS mesh radios as an extensible, super long battery life mesh GPS communicator. These radios are great for hiking, skiing, paragliding -
-essentially any hobby where you don't have reliable internet access. Each member of your private mesh can always see the location and distance of all other
-members and any text messages sent to your group chat.
 
-The radios automatically create a mesh to forward packets as needed, so everyone in the group can receive messages from even the furthest member. The radios
+- **[Building Instructions](https://meshtastic.org/docs/development/firmware/build)**
-will optionally work with your phone, but no phone is required.
+- **[Flashing Instructions](https://meshtastic.org/docs/getting-started/flashing-firmware/)**
 
-Typical time between recharging the radios should be about eight days.
+## Stats
 
-This project is is currently in beta-testing - if you have questions please [join our discussion forum](https://meshtastic.discourse.group/).
+![Alt](https://repobeats.axiom.co/api/embed/a92f097d9197ae853e780ec53d7d126e545629ab.svg "Repobeats analytics image")
-
-This software is 100% open source and developed by a group of hobbyist experimenters. No warranty is provided, if you'd like to improve it - we'd love your help. Please post in the chat.
-
-## Supported hardware
-
-We currently support three models of radios.
-
-- TTGO T-Beam
-
-  - [T-Beam V1.0 w/ NEO-M8N](https://www.aliexpress.com/item/33047631119.html) (Recommended)
-  - [T-Beam V1.0 w/ NEO-6M](https://www.aliexpress.com/item/33050391850.html)
-  - 3D printable cases
-    - [T-Beam V0](https://www.thingiverse.com/thing:3773717)
-    - [T-Beam V1](https://www.thingiverse.com/thing:3830711)
-
-- [TTGO LORA32](https://www.aliexpress.com/item/4000211331316.html) - No GPS
-
-- [Heltec LoRa 32](https://heltec.org/project/wifi-lora-32/) - No GPS
-  - [3D Printable case](https://www.thingiverse.com/thing:3125854)
-
-**Make sure to get the frequency for your country**
-
-- US/JP/AU/NZ - 915MHz
-- CN - 470MHz
-- EU - 868MHz, 433MHz
-
-Getting a version that includes a screen is optional, but highly recommended.
-
-## Firmware Installation
-
-Prebuilt binaries for the supported radios are available in our [releases](https://github.com/meshtastic/Meshtastic-esp32/releases). Your initial installation has to happen over USB from your Mac, Windows or Linux PC. Once our software is installed, all future software updates happen over bluetooth from your phone.
-
-Please post comments on our [group chat](https://meshtastic.discourse.group/) if you have problems or successes.
-
-### Installing from a GUI - Windows and Mac
-
-1. Download and unzip the latest Meshtastic firmware [release](https://github.com/meshtastic/Meshtastic-esp32/releases).
-2. Download [ESPHome Flasher](https://github.com/esphome/esphome-flasher/releases) (either x86-32bit Windows or x64-64 bit Windows).
-3. Connect your radio to your USB port and open ESPHome Flasher.
-4. If your board is not showing under Serial Port then you likely need to install the drivers for the CP210X serial chip. In Windows you can check by searching “Device Manager” and ensuring the device is shown under “Ports”.
-5. If there is an error, download the drivers [here](https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers), then unzip and run the Installer application.
-6. In ESPHome Flasher, refresh the serial ports and select your board.
-7. Browse to the previously downloaded firmware and select the correct firmware based on the board type, country and frequency.
-8. Select Flash ESP.
-9. Once complete, “Done! Flashing is complete!” will be shown.
-10. Debug messages sent from the Meshtastic device can be viewed with a terminal program such as [PuTTY](https://www.putty.org/) (Windows only). Within PuTTY, click “Serial”, enter the “Serial line” com port (can be found at step 4), enter “Speed” as 921600, then click “Open”.
-
-### Installing from a commandline
-
-These instructions currently require a few commmand lines, but it should be pretty straightforward.
-
-1. Install "pip". Pip is the python package manager we use to get the esptool installer app. Instructions [here](https://www.makeuseof.com/tag/install-pip-for-python/). If you are using OS-X, see these [special instructions](docs/software/install-OSX.md).
-2. Run "pip install --upgrade esptool" to get esptool installed on your machine.
-3. Connect your radio to your USB port.
-4. Confirm that your device is talking to your PC by running "esptool.py chip_id". The Heltec build also works on the TTGO LORA32 radio. You should see something like:
-
-```
-mydir$ esptool.py chip_id
-esptool.py v2.6
-Found 2 serial ports
-Serial port /dev/ttyUSB0
-Connecting....
-Detecting chip type... ESP32
-Chip is ESP32D0WDQ6 (revision 1)
-Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
-MAC: 24:6f:28:b5:36:71
-Uploading stub...
-Running stub...
-Stub running...
-Warning: ESP32 has no Chip ID. Reading MAC instead.
-MAC: 24:6f:28:b5:36:71
-Hard resetting via RTS pin...
-```
-
-5. cd into the directory where the release zip file was expanded.
-6. Install the correct firmware for your board with `device-install.sh firmware-_board_-_country_.bin`.
-   - Example: `./device-install.sh firmware-HELTEC-US-0.0.3.bin`.
-7. To update run `device-update.sh firmware-_board_-_country_.bin`
-   - Example: `./device-update.sh firmware-HELTEC-US-0.0.3.bin`.
-
-Note: If you have previously installed meshtastic, you don't need to run this full script instead just run `esptool.py --baud 921600 write_flash 0x10000 firmware-_board_-_country_-_version_.bin`. This will be faster, also all of your current preferences will be preserved.
-
-You should see something like this:
-
-```
-kevinh@kevin-server:~/development/meshtastic/meshtastic-esp32/release/latest$ ./device-install.sh firmware-TBEAM-US-0.1.8.bin
-Trying to flash firmware-TBEAM-US-0.1.8.bin, but first erasing and writing system information
-esptool.py v2.6
-Found 2 serial ports
-Serial port /dev/ttyUSB0
-Connecting........____
-Detecting chip type... ESP32
-Chip is ESP32D0WDQ6 (revision 1)
-Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
-MAC: 24:6f:28:b2:01:6c
-Uploading stub...
-Running stub...
-Stub running...
-Changing baud rate to 921600
-Changed.
-Erasing flash (this may take a while)...
-Chip erase completed successfully in 6.1s
-Hard resetting via RTS pin...
-esptool.py v2.6
-Found 2 serial ports
-Serial port /dev/ttyUSB0
-Connecting.......
-Detecting chip type... ESP32
-Chip is ESP32D0WDQ6 (revision 1)
-Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
-MAC: 24:6f:28:b2:01:6c
-Uploading stub...
-Running stub...
-Stub running...
-Changing baud rate to 921600
-Changed.
-Configuring flash size...
-Auto-detected Flash size: 4MB
-Flash params set to 0x0220
-Compressed 61440 bytes to 11950...
-Wrote 61440 bytes (11950 compressed) at 0x00001000 in 0.2 seconds (effective 3092.4 kbit/s)...
-Hash of data verified.
-
-Leaving...
-Hard resetting via RTS pin...
-esptool.py v2.6
-Found 2 serial ports
-Serial port /dev/ttyUSB0
-Connecting.....
-Detecting chip type... ESP32
-Chip is ESP32D0WDQ6 (revision 1)
-Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
-MAC: 24:6f:28:b2:01:6c
-Uploading stub...
-Running stub...
-Stub running...
-Changing baud rate to 921600
-Changed.
-Configuring flash size...
-Auto-detected Flash size: 4MB
-Compressed 1223568 bytes to 678412...
-Wrote 1223568 bytes (678412 compressed) at 0x00010000 in 10.7 seconds (effective 912.0 kbit/s)...
-Hash of data verified.
-
-Leaving...
-Hard resetting via RTS pin...
-```
-
-7. The board will boot and show the Meshtastic logo.
-8. Please post a comment on our chat so we know if these instructions worked for you ;-). If you find bugs/have-questions post there also - we will be rapidly iterating over the next few weeks.
-
-# Meshtastic Android app
-
-The companion (optional) Meshtastic Android app is [here](https://play.google.com/store/apps/details?id=com.geeksville.mesh&referrer=utm_source%3Dgithub-dev-readme). You can also download it on Google Play.
-
-# Python API
-
-We offer a [python API](https://github.com/meshtastic/Meshtastic-python) that makes it easy to use these devices to provide mesh networking for your custom projects.
-
-# Development
-
-We'd love to have you join us on this merry little project. Please see our [development documents](./docs/software/sw-design.md) and [join us in our discussion forum](https://meshtastic.discourse.group/).
-
-# Credits
-
-This project is run by volunteers. Past contributors include:
-
-- @astro-arphid: Added support for 433MHz radios in europe.
-- @claesg: Various documentation fixes and 3D print enclosures
-- @girtsf: Lots of improvements
-- @spattinson: Fixed interrupt handling for the AXP192 part
-
-# IMPORTANT DISCLAIMERS AND FAQ
-
-For a listing of currently missing features and a FAQ click [here](docs/faq.md).
-
-Copyright 2019 Geeksville Industries, LLC. GPL V3 Licensed.

arch/esp32/esp32.ini

@@ -0,0 +1,66 @@
+; Common settings for ESP targes, mixin with extends = esp32_base
+[esp32_base]
+extends = arduino_base
+custom_esp32_kind = esp32
+platform = platformio/espressif32@6.7.0
+
+build_src_filter = 
+  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/> -<mesh/raspihttp>
+
+upload_speed = 921600
+debug_init_break = tbreak setup
+monitor_filters = esp32_exception_decoder
+
+board_build.filesystem = littlefs
+
+# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
+# See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
+# This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
+build_unflags = -fno-lto
+build_flags =
+  ${arduino_base.build_flags}
+  -flto
+  -Wall
+  -Wextra
+  -Isrc/platform/esp32
+  -std=c++11
+  -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG
+  -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
+  -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
+  -DAXP_DEBUG_PORT=Serial
+  -DCONFIG_BT_NIMBLE_ENABLED
+  -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
+  -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
+  -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=5120
+  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
+  -DSERIAL_BUFFER_SIZE=4096
+  -DLIBPAX_ARDUINO
+  -DLIBPAX_WIFI
+  -DLIBPAX_BLE
+  ;-DDEBUG_HEAP
+
+lib_deps =
+  ${arduino_base.lib_deps}
+  ${networking_base.lib_deps}
+  ${environmental_base.lib_deps}
+  https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
+  h2zero/NimBLE-Arduino@^1.4.2
+  https://github.com/dbSuS/libpax.git#7bcd3fcab75037505be9b122ab2b24cc5176b587
+  https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
+  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
+
+lib_ignore = 
+  segger_rtt
+  ESP32 BLE Arduino
+
+; leave this commented out to avoid breaking Windows
+;upload_port = /dev/ttyUSB0
+;monitor_port = /dev/ttyUSB0
+
+; Please don't delete these lines. JM uses them.
+;upload_port = /dev/cu.SLAB_USBtoUART
+;monitor_port = /dev/cu.SLAB_USBtoUART
+
+; customize the partition table
+; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
+board_build.partitions = partition-table.csv

arch/esp32/esp32c3.ini

@@ -0,0 +1,6 @@
+[esp32c3_base]
+extends = esp32_base
+custom_esp32_kind = esp32c3
+
+monitor_speed = 115200
+monitor_filters = esp32_c3_exception_decoder

arch/esp32/esp32s2.ini

@@ -0,0 +1,19 @@
+[esp32s2_base]
+extends = esp32_base
+custom_esp32_kind = esp32s2
+
+build_src_filter = 
+ ${esp32_base.build_src_filter} - <libpax/> -<nimble/> -<mesh/raspihttp>
+
+monitor_speed = 115200
+
+build_flags =
+  ${esp32_base.build_flags} 
+  -DHAS_BLUETOOTH=0
+  -DMESHTASTIC_EXCLUDE_PAXCOUNTER
+  -DMESHTASTIC_EXCLUDE_BLUETOOTH
+  
+lib_ignore = 
+  ${esp32_base.lib_ignore} 
+  NimBLE-Arduino
+  libpax

arch/esp32/esp32s3.ini

@@ -0,0 +1,6 @@
+[esp32s3_base]
+extends = esp32_base
+custom_esp32_kind = esp32s3
+
+monitor_speed = 115200
+

arch/nrf52/nrf52.ini

@@ -0,0 +1,21 @@
+[nrf52_base]
+; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files
+platform = platformio/nordicnrf52@^10.5.0
+extends = arduino_base
+
+build_type = debug
+build_flags = 
+  ${arduino_base.build_flags}
+  -DSERIAL_BUFFER_SIZE=1024
+  -Wno-unused-variable
+  -Isrc/platform/nrf52
+  -DLFS_NO_ASSERT                      ; Disable LFS assertions , see https://github.com/meshtastic/firmware/pull/3818
+
+build_src_filter = 
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2040> -<mesh/eth/> -<mesh/raspihttp>
+
+lib_deps=
+  ${arduino_base.lib_deps}
+
+lib_ignore =
+  BluetoothOTA

arch/nrf52/nrf52832.ini

@@ -0,0 +1,7 @@
+[nrf52832_base]
+extends = nrf52_base
+
+build_flags = ${nrf52_base.build_flags} 
+
+lib_deps =
+  ${nrf52_base.lib_deps}

arch/nrf52/nrf52840.ini

@@ -0,0 +1,9 @@
+[nrf52840_base]
+extends = nrf52_base
+
+build_flags = ${nrf52_base.build_flags} 
+
+lib_deps =
+  ${nrf52_base.lib_deps}
+  ${environmental_base.lib_deps}
+  https://github.com/Kongduino/Adafruit_nRFCrypto.git#e31a8825ea3300b163a0a3c1ddd5de34e10e1371

arch/portduino/portduino.ini

@@ -0,0 +1,37 @@
+; The Portduino based sim environment on top of any host OS, all hardware will be simulated
+[portduino_base]
+platform = https://github.com/meshtastic/platform-native.git#ad8112adf82ce1f5b917092cf32be07a077801a0
+framework = arduino
+
+build_src_filter = 
+  ${env.build_src_filter} 
+  -<platform/esp32/> 
+  -<nimble/> 
+  -<platform/nrf52/> 
+  -<platform/stm32wl/> 
+  -<platform/rp2040>
+  -<mesh/wifi/>
+  -<mesh/http/>
+  +<mesh/raspihttp/>
+  -<mesh/eth/>
+  -<modules/esp32>
+  -<modules/Telemetry/EnvironmentTelemetry.cpp>
+  -<modules/Telemetry/AirQualityTelemetry.cpp>
+  -<modules/Telemetry/Sensor>
+  +<../variants/portduino>
+
+lib_deps =
+  ${env.lib_deps}
+  ${networking_base.lib_deps}
+  rweather/Crypto@^0.4.0
+  https://github.com/lovyan03/LovyanGFX.git#5a39989aa2c9492572255b22f033843ec8900233
+
+build_flags =
+  ${arduino_base.build_flags}
+  -fPIC
+  -Isrc/platform/portduino
+  -DRADIOLIB_EEPROM_UNSUPPORTED
+  -DPORTDUINO_LINUX_HARDWARE
+  -lbluetooth
+  -lgpiod
+  -lyaml-cpp

arch/rp2040/rp2040.ini

@@ -0,0 +1,23 @@
+; Common settings for rp2040 Processor based targets
+[rp2040_base]
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git#60d6ae81fcc73c34b1493ca9e261695e471bc0c2
+extends = arduino_base
+platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#3.7.2
+
+board_build.core = earlephilhower
+board_build.filesystem_size = 0.5m
+build_flags = 
+  ${arduino_base.build_flags} -Wno-unused-variable 
+  -Isrc/platform/rp2040
+  -D__PLAT_RP2040__
+#  -D _POSIX_THREADS
+build_src_filter = 
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/> -<mesh/wifi/> -<mesh/http/> -<mesh/raspihttp>
+
+lib_ignore =
+  BluetoothOTA
+
+lib_deps =
+  ${arduino_base.lib_deps}
+  ${environmental_base.lib_deps}
+  rweather/Crypto

arch/stm32/stm32wl5e.ini

@@ -0,0 +1,28 @@
+[stm32wl5e_base]
+platform_packages = platformio/framework-arduinoststm32 @ https://github.com/stm32duino/Arduino_Core_STM32.git#6e3f9910d0122e82a6c3438507dfac3d2fd80a39
+platform = ststm32
+board = generic_wl5e
+framework = arduino
+
+build_type = debug
+
+build_flags = 
+  ${arduino_base.build_flags}
+  -Isrc/platform/stm32wl -g
+  -DconfigUSE_CMSIS_RTOS_V2=1
+  -DVECT_TAB_OFFSET=0x08000000
+  
+build_src_filter = 
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/Telemetry> -<platform/nrf52> -<platform/portduino> -<platform/rp2040> -<mesh/raspihttp>
+
+board_upload.offset_address = 0x08000000
+upload_protocol = stlink
+
+lib_deps =
+  ${env.lib_deps}
+  https://github.com/kokke/tiny-AES-c.git#f06ac37fc31dfdaca2e0d9bec83f90d5663c319b
+  https://github.com/littlefs-project/littlefs.git#v2.5.1
+  https://github.com/stm32duino/STM32FreeRTOS.git#10.3.1
+
+lib_ignore =
+  mathertel/OneButton

bin/build-all.sh

@@ -1,72 +0,0 @@
-#!/bin/bash
-
-set -e
-
-source bin/version.sh
-
-COUNTRIES="US EU433 EU865 CN JP"
-#COUNTRIES=US
-#COUNTRIES=CN
-
-BOARDS="ttgo-lora32-v2 ttgo-lora32-v1 tbeam heltec"
-#BOARDS=tbeam
-
-OUTDIR=release/latest
-
-# We keep all old builds (and their map files in the archive dir)
-ARCHIVEDIR=release/archive 
-
-rm -f $OUTDIR/firmware*
-
-mkdir -p $OUTDIR/bins $OUTDIR/elfs
-rm -f $OUTDIR/bins/*
-
-# build the named environment and copy the bins to the release directory
-function do_build {
-    ENV_NAME=$1
-    echo "Building for $ENV_NAME with $PLATFORMIO_BUILD_FLAGS"
-    SRCBIN=.pio/build/$ENV_NAME/firmware.bin
-    SRCELF=.pio/build/$ENV_NAME/firmware.elf
-    rm -f $SRCBIN 
-
-    # The shell vars the build tool expects to find
-    export HW_VERSION="1.0-$COUNTRY"
-    export APP_VERSION=$VERSION
-    export COUNTRY
-
-    pio run --jobs 4 --environment $ENV_NAME # -v
-    cp $SRCBIN $OUTDIR/bins/firmware-$ENV_NAME-$COUNTRY-$VERSION.bin
-    cp $SRCELF $OUTDIR/elfs/firmware-$ENV_NAME-$COUNTRY-$VERSION.elf
-}
-
-# Make sure our submodules are current
-git submodule update 
-
-# Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio lib update 
-
-for COUNTRY in $COUNTRIES; do 
-    for BOARD in $BOARDS; do
-        do_build $BOARD
-    done
-done
-
-# keep the bins in archive also
-cp $OUTDIR/bins/firmware* $OUTDIR/elfs/firmware* $ARCHIVEDIR
-
-cat >$OUTDIR/curfirmwareversion.xml <<XML
-<?xml version="1.0" encoding="utf-8"?>
-
-<!-- This file is kept in source control because it reflects the last stable
-release.  It is used by the android app for forcing software updates.  Do not edit.
-Generated by bin/buildall.sh -->
-
-<resources>
-    <string name="cur_firmware_version">$VERSION</string>
-</resources>
-XML
-
-rm -f $ARCHIVEDIR/firmware-$VERSION.zip
-zip --junk-paths $ARCHIVEDIR/firmware-$VERSION.zip $OUTDIR/bins/firmware-*-$VERSION.* images/system-info.bin bin/device-install.sh bin/device-update.sh
-
-echo BUILT ALL

bin/build-esp32.sh

@@ -0,0 +1,40 @@
+#!/usr/bin/env bash
+
+set -e
+
+VERSION=`bin/buildinfo.py long`
+SHORT_VERSION=`bin/buildinfo.py short`
+
+OUTDIR=release/
+
+rm -f $OUTDIR/firmware*
+rm -r $OUTDIR/* || true
+
+# Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
+platformio pkg update 
+
+echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
+rm -f .pio/build/$1/firmware.*
+
+# The shell vars the build tool expects to find
+export APP_VERSION=$VERSION
+
+basename=firmware-$1-$VERSION
+
+pio run --environment $1 # -v
+SRCELF=.pio/build/$1/firmware.elf
+cp $SRCELF $OUTDIR/$basename.elf
+
+echo "Copying ESP32 bin file"
+SRCBIN=.pio/build/$1/firmware.factory.bin
+cp $SRCBIN $OUTDIR/$basename.bin
+
+echo "Copying ESP32 update bin file"
+SRCBIN=.pio/build/$1/firmware.bin
+cp $SRCBIN $OUTDIR/$basename-update.bin
+
+echo "Building Filesystem for ESP32 targets"
+pio run --environment $1 -t buildfs
+cp .pio/build/$1/littlefs.bin $OUTDIR/littlefs-$VERSION.bin
+cp bin/device-install.* $OUTDIR
+cp bin/device-update.* $OUTDIR

bin/build-native.sh

@@ -0,0 +1,31 @@
+#!/usr/bin/env bash
+
+set -e
+
+platformioFailed() {
+	[[ $VIRTUAL_ENV != "" ]] && exit 1 # don't hint at virtualenv if it's already in use
+	echo -e "\nThere were issues running platformio and you are not using a virtual environment." \
+		"\nYou may try setting up virtualenv and downloading the latest platformio from pip:" \
+		"\n\tvirtualenv venv" \
+		"\n\tsource venv/bin/activate" \
+		"\n\tpip install platformio" \
+		"\n\t./bin/build-native.sh # retry building"
+	exit 1
+}
+
+VERSION=$(bin/buildinfo.py long)
+SHORT_VERSION=$(bin/buildinfo.py short)
+
+OUTDIR=release/
+
+rm -f $OUTDIR/firmware*
+
+mkdir -p $OUTDIR/
+rm -r $OUTDIR/* || true
+
+# Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
+platformio pkg update --environment native || platformioFailed
+pio run --environment native || platformioFailed
+cp .pio/build/native/program "$OUTDIR/meshtasticd_linux_$(uname -m)"
+cp bin/device-install.* $OUTDIR
+cp bin/device-update.* $OUTDIR

bin/build-nrf52.sh

@@ -0,0 +1,48 @@
+#!/usr/bin/env bash
+
+set -e
+
+VERSION=$(bin/buildinfo.py long)
+SHORT_VERSION=$(bin/buildinfo.py short)
+
+OUTDIR=release/
+
+rm -f $OUTDIR/firmware*
+rm -r $OUTDIR/* || true
+
+# Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
+platformio pkg update
+
+echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
+rm -f .pio/build/$1/firmware.*
+
+# The shell vars the build tool expects to find
+export APP_VERSION=$VERSION
+
+basename=firmware-$1-$VERSION
+
+pio run --environment $1 # -v
+SRCELF=.pio/build/$1/firmware.elf
+cp $SRCELF $OUTDIR/$basename.elf
+
+echo "Generating NRF52 dfu file"
+DFUPKG=.pio/build/$1/firmware.zip
+cp $DFUPKG $OUTDIR/$basename-ota.zip
+
+echo "Generating NRF52 uf2 file"
+SRCHEX=.pio/build/$1/firmware.hex
+
+# if WM1110 target, merge hex with softdevice 7.3.0
+if (echo $1 | grep -q "wio-sdk-wm1110"); then
+	echo "Merging with softdevice"
+	bin/mergehex -m bin/s140_nrf52_7.3.0_softdevice.hex $SRCHEX -o .pio/build/$1/$basename.hex
+	SRCHEX=.pio/build/$1/$basename.hex
+	bin/uf2conv.py $SRCHEX -c -o $OUTDIR/$basename.uf2 -f 0xADA52840
+	cp $SRCHEX $OUTDIR
+	cp bin/*.uf2 $OUTDIR
+else
+	bin/uf2conv.py $SRCHEX -c -o $OUTDIR/$basename.uf2 -f 0xADA52840
+	cp bin/device-install.* $OUTDIR
+	cp bin/device-update.* $OUTDIR
+	cp bin/*.uf2 $OUTDIR
+fi

bin/build-rpi2040.sh

@@ -0,0 +1,33 @@
+#!/usr/bin/env bash
+
+set -e
+
+VERSION=`bin/buildinfo.py long`
+SHORT_VERSION=`bin/buildinfo.py short`
+
+OUTDIR=release/
+
+rm -f $OUTDIR/firmware*
+rm -r $OUTDIR/* || true
+
+# Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
+platformio pkg update 
+
+echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
+rm -f .pio/build/$1/firmware.*
+
+# The shell vars the build tool expects to find
+export APP_VERSION=$VERSION
+
+basename=firmware-$1-$VERSION
+
+pio run --environment $1 # -v
+SRCELF=.pio/build/$1/firmware.elf
+cp $SRCELF $OUTDIR/$basename.elf
+
+echo "Copying uf2 file"
+SRCBIN=.pio/build/$1/firmware.uf2
+cp $SRCBIN $OUTDIR/$basename.uf2
+
+cp bin/device-install.* $OUTDIR
+cp bin/device-update.* $OUTDIR

bin/buildinfo.py

@@ -0,0 +1,8 @@
+#!/usr/bin/env python3
+import sys
+
+from readprops import readProps
+
+verObj = readProps("version.properties")
+propName = sys.argv[1]
+print(f"{verObj[propName]}")

bin/bump_version.py

@@ -0,0 +1,16 @@
+#!/usr/bin/env python
+"""Bump the version number"""
+
+lines = None
+
+with open('version.properties', 'r', encoding='utf-8') as f:
+    lines = f.readlines()
+
+with open('version.properties', 'w', encoding='utf-8') as f:
+    for line in lines:
+        if line.lstrip().startswith("build = "):
+            words = line.split(" = ")
+            ver = f'build = {int(words[1]) + 1}'
+            f.write(f'{ver}\n')
+        else:
+            f.write(line)

bin/check-all.sh

@@ -0,0 +1,26 @@
+#!/usr/bin/env bash
+
+# Note: This is a prototype for how we could add static code analysis to the CI.
+
+set -e
+
+VERSION=$(bin/buildinfo.py long)
+
+# The shell vars the build tool expects to find
+export APP_VERSION=$VERSION
+
+if [[ $# -gt 0 ]]; then
+	# can override which environment by passing arg
+	BOARDS="$@"
+else
+	BOARDS="tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 rak4631 rak4631_eink rak11200 t-echo canaryone pca10059_diy_eink"
+fi
+
+echo "BOARDS:${BOARDS}"
+
+CHECK=""
+for BOARD in $BOARDS; do
+	CHECK="${CHECK} -e ${BOARD}"
+done
+
+pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt" $CHECK --skip-packages --pattern="src/" --fail-on-defect=medium --fail-on-defect=high

bin/check-dependencies.sh

@@ -0,0 +1,23 @@
+#!/usr/bin/env bash
+
+# Note: This is a prototype for how we could add static code analysis to the CI.
+
+set -e
+
+if [[ $# -gt 0 ]]; then
+	# can override which environment by passing arg
+	BOARDS="$@"
+else
+	BOARDS="rak4631 rak4631_eink t-echo canaryone pca10059_diy_eink pico rak11200 tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 nano-g1 station-g1 m5stack-core m5stack-coreink tbeam-s3-core"
+fi
+
+echo "BOARDS:${BOARDS}"
+
+CHECK=""
+for BOARD in $BOARDS; do
+	CHECK="${CHECK} -e ${BOARD}"
+done
+
+echo $CHECK
+
+pio pkg outdated -e $CHECK

bin/config-dist.yaml

@@ -0,0 +1,144 @@
+### Define your devices here using Broadcom pin numbering
+### Uncomment the block that corresponds to your hardware
+### Including the "Module:" line!
+---
+Lora:
+#  Module: sx1262  # Waveshare SX126X XXXM
+#  DIO2_AS_RF_SWITCH: true
+#  CS: 21
+#  IRQ: 16
+#  Busy: 20
+#  Reset: 18
+
+#  Module: sx1262  # Waveshare SX1302 LISTEN ONLY AT THIS TIME!
+#  CS: 7
+#  IRQ: 17
+#  Reset: 22
+
+#  Module: sx1262  # pinedio
+#  CS: 0
+#  IRQ: 10
+#  Busy: 11
+#  spidev: spidev0.1
+
+#  Module: RF95  # Adafruit RFM9x
+#  Reset: 25
+#  CS: 7
+#  IRQ: 22
+#  Busy: 23
+
+#  Module: RF95  # Elecrow Lora RFM95 IOT https://www.elecrow.com/lora-rfm95-iot-board-for-rpi.html
+#  Reset: 22
+#  CS: 7
+#  IRQ: 25
+
+#  Module: sx1280  # SX1280
+#  CS: 21
+#  IRQ: 16
+#  Busy: 20
+#  Reset: 18
+
+#  Module: sx1268  # SX1268-based modules, tested with Ebyte E22 400M33S
+#  CS: 21
+#  IRQ: 16
+#  Busy: 20
+#  Reset: 18
+#  TXen: 6
+#  RXen: 12
+#  DIO3_TCXO_VOLTAGE: true
+
+#  DIO3_TCXO_VOLTAGE: true  # the Waveshare Core1262 and others are known to need this setting
+
+#  TXen: x  # TX and RX enable pins
+#  RXen: x
+
+#  ch341_quirk: true # Uncomment this to use the chunked SPI transfer that seems to fix the ch341
+
+### Set gpio chip to use in /dev/. Defaults to 0.
+### Notably the Raspberry Pi 5 puts the GPIO header on gpiochip4
+#  gpiochip: 4
+
+### Specify the SPI device to use in /dev/. Defaults to spidev0.0
+### Some devices, like the pinedio, may require spidev0.1 as a workaround.
+#  spidev: spidev0.0
+
+### Define GPIO buttons here:
+
+GPIO:
+#  User: 6
+
+### Define GPS
+
+GPS:
+#  SerialPath: /dev/ttyS0
+
+### Specify I2C device, or leave blank for none
+
+I2C:
+#  I2CDevice: /dev/i2c-1
+
+### Set up SPI displays here. Note that I2C displays are generally auto-detected.
+
+Display:
+
+### Waveshare 2.8inch RPi LCD
+#  Panel: ST7789
+#  CS: 8
+#  DC: 22        # Data/Command pin
+#  Backlight: 18
+#  Width: 240
+#  Height: 320
+#  Reset: 27
+#  Rotate: true
+#  Invert: true
+
+### Waveshare 1.44inch LCD HAT
+#  Panel: ST7735S
+#  CS: 8         #Chip Select
+#  DC: 25        # Data/Command pin
+#  Backlight: 24
+#  Width: 128
+#  Height: 128
+#  Reset: 27
+#  OffsetX: 0
+#  OffsetY: 0
+
+### Adafruit PiTFT 2.8 TFT+Touchscreen
+#  Panel: ILI9341
+#  CS: 8
+#  DC: 25
+#  Width: 240
+#  Height: 320
+#  Rotate: true
+
+Touchscreen:
+### Note, at least for now, the touchscreen must have a CS pin defined, even if you let Linux manage the CS switching.
+
+#  Module: STMPE610 # Option 1 for Adafruit PiTFT 2.8
+#  CS: 7
+#  IRQ: 24
+
+#  Module: FT5x06 # Option 2 for Adafruit PiTFT 2.8
+#  IRQ: 24
+#  I2CAddr: 0x38
+
+#  Module: XPT2046 # Waveshare 2.8inch
+#  CS: 7
+#  IRQ: 17
+
+### Configure device for direct keyboard input
+
+Input:
+#  KeyboardDevice: /dev/input/by-id/usb-_Raspberry_Pi_Internal_Keyboard-event-kbd
+
+###
+
+Logging:
+  LogLevel: info # debug, info, warn, error
+
+Webserver:
+#  Port: 443 # Port for Webserver & Webservices
+#  RootPath: /usr/share/doc/meshtasticd/web # Root Dir of WebServer
+
+General:
+  MaxNodes: 200

bin/device-install.bat

@@ -0,0 +1,55 @@
+@ECHO OFF
+
+set PYTHON=python
+
+goto GETOPTS
+:HELP
+echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME]
+echo Flash image file to device, but first erasing and writing system information
+echo.
+echo     -h               Display this help and exit
+echo     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerrous).
+echo     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: %PYTHON%)
+echo     -f FILENAME      The .bin file to flash.  Custom to your device type and region.
+goto EOF
+
+:GETOPTS
+if /I "%1"=="-h" goto HELP
+if /I "%1"=="--help" goto HELP
+if /I "%1"=="-F" set "FILENAME=%2" & SHIFT
+if /I "%1"=="-p" set ESPTOOL_PORT=%2 & SHIFT
+if /I "%1"=="-P" set PYTHON=%2 & SHIFT
+SHIFT
+IF NOT "__%1__"=="____" goto GETOPTS
+
+IF "__%FILENAME%__" == "____" (
+    echo "Missing FILENAME"
+	goto HELP
+)
+IF EXIST %FILENAME% IF x%FILENAME:update=%==x%FILENAME% (
+    echo Trying to flash update %FILENAME%, but first erasing and writing system information"
+	%PYTHON% -m esptool --baud 115200 erase_flash
+	%PYTHON% -m esptool --baud 115200 write_flash 0x00 %FILENAME%
+    
+    @REM Account for S3 and C3 board's different OTA partition
+    IF x%FILENAME:s3=%==x%FILENAME% IF x%FILENAME:v3=%==x%FILENAME% IF x%FILENAME:t-deck=%==x%FILENAME% IF x%FILENAME:wireless-paper=%==x%FILENAME% IF x%FILENAME:wireless-tracker=%==x%FILENAME% IF x%FILENAME:station-g2=%==x%FILENAME% IF x%FILENAME:unphone=%==x%FILENAME% (
+        IF x%FILENAME:esp32c3=%==x%FILENAME% (
+            %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota.bin
+        ) else (
+            %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota-c3.bin
+        )
+	) else (
+        %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota-s3.bin
+    )
+    for %%f in (littlefs-*.bin) do (
+        %PYTHON% -m esptool --baud 115200 write_flash 0x300000 %%f
+    )
+) else (
+    echo "Invalid file: %FILENAME%"
+	goto HELP
+) else (
+    echo "Invalid file: %FILENAME%"
+	goto HELP
+)
+
+:EOF

bin/device-install.sh

@@ -1,11 +1,71 @@
-#!/bin/bash
+#!/bin/sh
+
+PYTHON=${PYTHON:-$(which python3 python | head -n 1)}
 
 set -e
 
-FILENAME=$1
+# Usage info
+show_help() {
+	cat <<EOF
+Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME]
+Flash image file to device, but first erasing and writing system information"
 
-echo "Trying to flash $FILENAME, but first erasing and writing system information"
+    -h               Display this help and exit
-esptool.py --baud 921600 erase_flash
+    -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
-esptool.py --baud 921600 write_flash 0x1000 system-info.bin
+    -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
-esptool.py --baud 921600 write_flash 0x10000 $FILENAME
+    -f FILENAME      The .bin file to flash.  Custom to your device type and region.
 
+EOF
+}
+
+while getopts ":hp:P:f:" opt; do
+	case "${opt}" in
+	h)
+		show_help
+		exit 0
+		;;
+	p)
+		export ESPTOOL_PORT=${OPTARG}
+		;;
+	P)
+		PYTHON=${OPTARG}
+		;;
+	f)
+		FILENAME=${OPTARG}
+		;;
+	*)
+		echo "Invalid flag."
+		show_help >&2
+		exit 1
+		;;
+	esac
+done
+shift "$((OPTIND - 1))"
+
+[ -z "$FILENAME" -a -n "$1" ] && {
+	FILENAME=$1
+	shift
+}
+
+if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
+	echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
+	"$PYTHON" -m esptool erase_flash
+	"$PYTHON" -m esptool write_flash 0x00 ${FILENAME}
+	# Account for S3 board's different OTA partition
+	if [ -n "${FILENAME##*"s3"*}" ] && [ -n "${FILENAME##*"-v3"*}" ] && [ -n "${FILENAME##*"t-deck"*}" ] && [ -n "${FILENAME##*"wireless-paper"*}" ] && [ -n "${FILENAME##*"wireless-tracker"*}" ] && [ -n "${FILENAME##*"station-g2"*}" ] && [ -n "${FILENAME##*"unphone"*}" ]; then
+		if [ -n "${FILENAME##*"esp32c3"*}" ]; then
+			"$PYTHON" -m esptool write_flash 0x260000 bleota.bin
+		else
+			"$PYTHON" -m esptool write_flash 0x260000 bleota-c3.bin
+		fi
+	else
+		"$PYTHON" -m esptool write_flash 0x260000 bleota-s3.bin
+	fi
+	"$PYTHON" -m esptool write_flash 0x300000 littlefs-*.bin
+
+else
+	show_help
+	echo "Invalid file: ${FILENAME}"
+fi
+
+exit 0

bin/device-update.bat

@@ -0,0 +1,40 @@
+@ECHO OFF
+
+set PYTHON=python
+
+goto GETOPTS
+:HELP
+echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME]
+echo Flash image file to device, leave existing system intact.
+echo.
+echo     -h               Display this help and exit
+echo     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerrous).
+echo     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: %PYTHON%)
+echo     -f FILENAME      The *update.bin file to flash.  Custom to your device type.
+goto EOF
+
+:GETOPTS
+if /I "%1"=="-h" goto HELP
+if /I "%1"=="--help" goto HELP
+if /I "%1"=="-F" set "FILENAME=%2" & SHIFT
+if /I "%1"=="-p" set ESPTOOL_PORT=%2 & SHIFT
+if /I "%1"=="-P" set PYTHON=%2 & SHIFT
+SHIFT
+IF NOT "__%1__"=="____" goto GETOPTS
+
+IF "__%FILENAME%__" == "____" (
+    echo "Missing FILENAME"
+	goto HELP
+)
+IF EXIST %FILENAME% IF NOT x%FILENAME:update=%==x%FILENAME% (
+    echo Trying to flash update %FILENAME%
+    %PYTHON% -m esptool --baud 115200 write_flash 0x10000 %FILENAME%
+) else (
+    echo "Invalid file: %FILENAME%"
+	goto HELP
+) else (
+    echo "Invalid file: %FILENAME%"
+	goto HELP
+)
+
+:EOF

bin/device-update.sh

@@ -1,8 +1,54 @@
-#!/bin/bash
+#!/bin/sh
 
-set -e
+PYTHON=${PYTHON:-$(which python3 python|head -n 1)}
 
-FILENAME=$1
+# Usage info
+show_help() {
+cat << EOF
+Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME]
+Flash image file to device, leave existing system intact."
 
-echo "Trying to update $FILENAME"
+    -h               Display this help and exit
-esptool.py --baud 921600 write_flash 0x10000 $FILENAME
+    -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerrous).
+    -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
+    -f FILENAME      The *update.bin file to flash.  Custom to your device type.
+    
+EOF
+}
+
+
+while getopts ":hp:P:f:" opt; do
+    case "${opt}" in
+        h)
+            show_help
+            exit 0
+            ;;
+        p)  export ESPTOOL_PORT=${OPTARG}
+	    ;;
+        P)  PYTHON=${OPTARG}
+            ;;
+        f)  FILENAME=${OPTARG}
+            ;;
+        *)
+ 	    echo "Invalid flag."
+            show_help >&2
+            exit 1
+            ;;
+    esac
+done
+shift "$((OPTIND-1))"
+
+[ -z "$FILENAME" -a -n "$1" ] && {
+    FILENAME=$1
+    shift
+}
+
+if [ -f "${FILENAME}" ] && [ -z "${FILENAME##*"update"*}" ]; then
+	printf "Trying to flash update ${FILENAME}"
+	$PYTHON -m esptool --baud 115200 write_flash 0x10000 ${FILENAME}
+else
+	show_help
+	echo "Invalid file: ${FILENAME}"
+fi
+
+exit 0

bin/dump-ram-users.sh

@@ -1,3 +1,5 @@
+#!/usr/bin/env bash
+
 arm-none-eabi-readelf -s -e .pio/build/nrf52dk/firmware.elf | head -80
 
 nm -CSr --size-sort .pio/build/nrf52dk/firmware.elf  | grep '^200'

bin/exception_decoder.py

@@ -11,19 +11,22 @@ Meshtastic notes:
 * version that's checked into meshtastic repo is based on: https://github.com/me21/EspArduinoExceptionDecoder
   which adds in ESP32 Backtrace decoding.
 * this also updates the defaults to use ESP32, instead of ESP8266 and defaults to the built firmware.bin
+* also updated the toolchain name, which will be set according to the platform
 
 To use, copy the "Backtrace: 0x...." line to a file, e.g., backtrace.txt, then run:
 $ bin/exception_decoder.py backtrace.txt
+For a platform other than ESP32, use the -p option, e.g.:
+$ bin/exception_decoder.py -p ESP32S3 backtrace.txt
+To specify a specific .elf file, use the -e option, e.g.:
+$ bin/exception_decoder.py -e firmware.elf backtrace.txt
 """
 
 import argparse
+import os
 import re
 import subprocess
-from collections import namedtuple
-
 import sys
-
+from collections import namedtuple
-import os
 
 EXCEPTIONS = [
     "Illegal instruction",
@@ -55,24 +58,39 @@ EXCEPTIONS = [
     "LoadStorePrivilege: A load or store referenced a virtual address at a ring level less than CRING",
     "reserved",
     "LoadProhibited: A load referenced a page mapped with an attribute that does not permit loads",
-    "StoreProhibited: A store referenced a page mapped with an attribute that does not permit stores"
+    "StoreProhibited: A store referenced a page mapped with an attribute that does not permit stores",
 ]
 
 PLATFORMS = {
-    "ESP8266": "lx106",
+    "ESP8266": "xtensa-lx106",
-    "ESP32": "esp32"
+    "ESP32": "xtensa-esp32",
+    "ESP32S3": "xtensa-esp32s3",
+    "ESP32C3": "riscv32-esp",
+}
+TOOLS = {
+    "ESP8266": "xtensa",
+    "ESP32": "xtensa-esp32",
+    "ESP32S3": "xtensa-esp32s3",
+    "ESP32C3": "riscv32-esp",
 }
 
-BACKTRACE_REGEX = re.compile(r"(?:\s+(0x40[0-2](?:\d|[a-f]|[A-F]){5}):0x(?:\d|[a-f]|[A-F]){8})\b")
+BACKTRACE_REGEX = re.compile(
+    r"(?:\s+(0x40[0-2](?:\d|[a-f]|[A-F]){5}):0x(?:\d|[a-f]|[A-F]){8})\b"
+)
 EXCEPTION_REGEX = re.compile("^Exception \\((?P<exc>[0-9]*)\\):$")
-COUNTER_REGEX = re.compile('^epc1=(?P<epc1>0x[0-9a-f]+) epc2=(?P<epc2>0x[0-9a-f]+) epc3=(?P<epc3>0x[0-9a-f]+) '
+COUNTER_REGEX = re.compile(
-                           'excvaddr=(?P<excvaddr>0x[0-9a-f]+) depc=(?P<depc>0x[0-9a-f]+)$')
+    "^epc1=(?P<epc1>0x[0-9a-f]+) epc2=(?P<epc2>0x[0-9a-f]+) epc3=(?P<epc3>0x[0-9a-f]+) "
+    "excvaddr=(?P<excvaddr>0x[0-9a-f]+) depc=(?P<depc>0x[0-9a-f]+)$"
+)
 CTX_REGEX = re.compile("^ctx: (?P<ctx>.+)$")
-POINTER_REGEX = re.compile('^sp: (?P<sp>[0-9a-f]+) end: (?P<end>[0-9a-f]+) offset: (?P<offset>[0-9a-f]+)$')
+POINTER_REGEX = re.compile(
-STACK_BEGIN = '>>>stack>>>'
+    "^sp: (?P<sp>[0-9a-f]+) end: (?P<end>[0-9a-f]+) offset: (?P<offset>[0-9a-f]+)$"
-STACK_END = '<<<stack<<<'
+)
+STACK_BEGIN = ">>>stack>>>"
+STACK_END = "<<<stack<<<"
 STACK_REGEX = re.compile(
-    '^(?P<off>[0-9a-f]+):\W+(?P<c1>[0-9a-f]+) (?P<c2>[0-9a-f]+) (?P<c3>[0-9a-f]+) (?P<c4>[0-9a-f]+)(\W.*)?$')
+    "^(?P<off>[0-9a-f]+):\W+(?P<c1>[0-9a-f]+) (?P<c2>[0-9a-f]+) (?P<c3>[0-9a-f]+) (?P<c4>[0-9a-f]+)(\W.*)?$"
+)
 
 StackLine = namedtuple("StackLine", ["offset", "content"])
 
@@ -96,15 +114,18 @@ class ExceptionDataParser(object):
         self.stack = []
 
     def _parse_backtrace(self, line):
-        if line.startswith('Backtrace:'):
+        if line.startswith("Backtrace:"):
-            self.stack = [StackLine(offset=0, content=(addr,)) for addr in BACKTRACE_REGEX.findall(line)]
+            self.stack = [
+                StackLine(offset=0, content=(addr,))
+                for addr in BACKTRACE_REGEX.findall(line)
+            ]
             return None
         return self._parse_backtrace
 
     def _parse_exception(self, line):
         match = EXCEPTION_REGEX.match(line)
         if match is not None:
-            self.exception = int(match.group('exc'))
+            self.exception = int(match.group("exc"))
             return self._parse_counters
         return self._parse_exception
 
@@ -144,14 +165,22 @@ class ExceptionDataParser(object):
         if line != STACK_END:
             match = STACK_REGEX.match(line)
             if match is not None:
-                self.stack.append(StackLine(offset=match.group("off"),
+                self.stack.append(
-                                            content=(match.group("c1"), match.group("c2"), match.group("c3"),
+                    StackLine(
-                                                     match.group("c4"))))
+                        offset=match.group("off"),
+                        content=(
+                            match.group("c1"),
+                            match.group("c2"),
+                            match.group("c3"),
+                            match.group("c4"),
+                        ),
+                    )
+                )
             return self._parse_stack_line
         return None
 
     def parse_file(self, file, platform, stack_only=False):
-        if platform == 'ESP32':
+        if platform != "ESP8266":
             func = self._parse_backtrace
         else:
             func = self._parse_exception
@@ -175,7 +204,9 @@ class AddressResolver(object):
         self._address_map = {}
 
     def _lookup(self, addresses):
-        cmd = [self._tool, "-aipfC", "-e", self._elf] + [addr for addr in addresses if addr is not None]
+        cmd = [self._tool, "-aipfC", "-e", self._elf] + [
+            addr for addr in addresses if addr is not None
+        ]
 
         if sys.version_info[0] < 3:
             output = subprocess.check_output(cmd)
@@ -190,19 +221,27 @@ class AddressResolver(object):
             match = line_regex.match(line)
 
             if match is None:
-                if last is not None and line.startswith('(inlined by)'):
+                if last is not None and line.startswith("(inlined by)"):
-                    line = line [12:].strip()
+                    line = line[12:].strip()
-                    self._address_map[last] += ("\n  \-> inlined by: " + line)
+                    self._address_map[last] += "\n  \-> inlined by: " + line
                 continue
 
-            if match.group("result") == '?? ??:0':
+            if match.group("result") == "?? ??:0":
                 continue
 
             self._address_map[match.group("addr")] = match.group("result")
             last = match.group("addr")
 
     def fill(self, parser):
-        addresses = [parser.epc1, parser.epc2, parser.epc3, parser.excvaddr, parser.sp, parser.end, parser.offset]
+        addresses = [
+            parser.epc1,
+            parser.epc2,
+            parser.epc3,
+            parser.excvaddr,
+            parser.sp,
+            parser.end,
+            parser.offset,
+        ]
         for line in parser.stack:
             addresses.extend(line.content)
 
@@ -241,7 +280,7 @@ def print_addr(name, value, resolver):
 def print_stack_full(lines, resolver):
     print("stack:")
     for line in lines:
-        print(line.offset + ":")
+        print(str(line.offset) + ":")
         for content in line.content:
             print("  " + resolver.resolve_stack_addr(content))
 
@@ -257,8 +296,10 @@ def print_stack(lines, resolver):
 
 
 def print_result(parser, resolver, platform, full=True, stack_only=False):
-    if platform == 'ESP8266' and not stack_only:
+    if platform == "ESP8266" and not stack_only:
-        print('Exception: {} ({})'.format(parser.exception, EXCEPTIONS[parser.exception]))
+        print(
+            "Exception: {} ({})".format(parser.exception, EXCEPTIONS[parser.exception])
+        )
 
         print("")
         print_addr("epc1", parser.epc1, resolver)
@@ -285,15 +326,33 @@ def print_result(parser, resolver, platform, full=True, stack_only=False):
 def parse_args():
     parser = argparse.ArgumentParser(description="decode ESP Stacktraces.")
 
-    parser.add_argument("-p", "--platform", help="The platform to decode from", choices=PLATFORMS.keys(),
+    parser.add_argument(
-                        default="ESP32")
+        "-p",
-    parser.add_argument("-t", "--tool", help="Path to the xtensa toolchain",
+        "--platform",
-                        default="~/.platformio/packages/toolchain-xtensa32/")
+        help="The platform to decode from",
-    parser.add_argument("-e", "--elf", help="path to elf file",
+        choices=PLATFORMS.keys(),
-                        default=".pio/build/esp32/firmware.elf")
+        default="ESP32",
-    parser.add_argument("-f", "--full", help="Print full stack dump", action="store_true")
+    )
-    parser.add_argument("-s", "--stack_only", help="Decode only a stractrace", action="store_true")
+    parser.add_argument(
-    parser.add_argument("file", help="The file to read the exception data from ('-' for STDIN)", default="-")
+        "-t",
+        "--tool",
+        help="Path to the toolchain (without specific platform)",
+        default="~/.platformio/packages/toolchain-",
+    )
+    parser.add_argument(
+        "-e", "--elf", help="path to elf file", default=".pio/build/tbeam/firmware.elf"
+    )
+    parser.add_argument(
+        "-f", "--full", help="Print full stack dump", action="store_true"
+    )
+    parser.add_argument(
+        "-s", "--stack_only", help="Decode only a stractrace", action="store_true"
+    )
+    parser.add_argument(
+        "file",
+        help="The file to read the exception data from ('-' for STDIN)",
+        default="-",
+    )
 
     return parser.parse_args()
 
@@ -309,10 +368,12 @@ if __name__ == "__main__":
             sys.exit(1)
         file = open(args.file, "r")
 
-    addr2line = os.path.join(os.path.abspath(os.path.expanduser(args.tool)),
+    addr2line = os.path.join(
-                             "bin/xtensa-" + PLATFORMS[args.platform] + "-elf-addr2line")
+        os.path.abspath(os.path.expanduser(args.tool + TOOLS[args.platform])),
-    if os.name == 'nt':
+        "bin/" + PLATFORMS[args.platform] + "-elf-addr2line",
-        addr2line += '.exe'
+    )
+    if os.name == "nt":
+        addr2line += ".exe"
     if not os.path.exists(addr2line):
         print("ERROR: addr2line not found (" + addr2line + ")")
 

bin/gen-images.sh

@@ -0,0 +1,19 @@
+#!/usr/bin/env bash
+
+set -e 
+
+# regen the design bins first
+cd design
+bin/generate-pngs.sh
+cd ..
+
+# assumes 50 wide, 28 high
+convert design/logo/png/Mesh_Logo_Black_Small.png -background white -alpha Background src/graphics/img/icon.xbm
+
+inkscape --batch-process -o images/compass.png -w 48 -h 48 images/location_searching-24px.svg
+convert compass.png -background white -alpha Background src/graphics/img/compass.xbm
+
+inkscape --batch-process -o images/face.png -w 13 -h 13 images/face-24px.svg
+
+inkscape --batch-process -o images/pin.png -w 13 -h 13 images/room-24px.svg
+convert pin.png -background white -alpha Background src/graphics/img/pin.xbm

bin/generate_ci_matrix.py

@@ -0,0 +1,43 @@
+#!/usr/bin/env python
+
+"""Generate the CI matrix."""
+
+import configparser
+import json
+import os
+import sys
+
+rootdir = "variants/"
+
+options = sys.argv[1:]
+
+outlist = []
+
+if len(options) < 1:
+    print(json.dumps(outlist))
+    exit()
+
+for subdir, dirs, files in os.walk(rootdir):
+    for file in files:
+        if file == "platformio.ini":
+            config = configparser.ConfigParser()
+            config.read(subdir + "/" + file)
+            for c in config.sections():
+                if c.startswith("env:"):
+                    section = config[c].name[4:]
+                    if "extends" in config[config[c].name]:
+                        if config[config[c].name]["extends"] == options[0] + "_base":
+                            if "board_level" in config[config[c].name]:
+                                if (
+                                    config[config[c].name]["board_level"] == "extra"
+                                ) & ("extra" in options):
+                                    outlist.append(section)
+                            else:
+                                outlist.append(section)
+                    if "board_check" in config[config[c].name]:
+                        if (config[config[c].name]["board_check"] == "true") & (
+                            "check" in options
+                        ):
+                            outlist.append(section)
+
+print(json.dumps(outlist))

bin/genpartitions.py

@@ -1,4 +1,4 @@
-#!/usr/bin/python2
+#!/usr/bin/env python2
 
 # This is a layout for 4MB of flash
 # Name,   Type, SubType, Offset,  Size, Flags
@@ -38,4 +38,4 @@ app0,     app,  ota_0,   , 0x{app:x},
 app1,     app,  ota_1,   , 0x{app:x},
 spiffs,   data, spiffs,  , 0x{spi:x} """.format(**locals())
 
-print(table)
+print(table)

bin/lora32-openocd.cfg

@@ -1,61 +0,0 @@
-# Example OpenOCD configuration file for ESP-WROOM-32 module.
-# By default, the following configuration is used:
-# - dual core debugging
-# - support for listing FreeRTOS tasks is enabled
-# - OpenOCD is configured to set SPI flash voltage at 3.3V
-#   by keeping MTDI bootstrapping pin low
-#
-# Use variables listed below to customize this.
-# Variables can be modified in this file or set on the command line.
-#
-# For example, OpenOCD can be started for single core ESP32 debugging on
-# ESP-WROVER-KIT with ESP-WROOM-32 module as follows:
-#
-#   openocd -f interface/ftdi/esp32_devkitj_v1.cfg -c 'set ESP32_ONLYCPU 1' -f board/esp-wroom-32.cfg
-#
-# If a different JTAG interface is used, change the first -f option.
-#
-# If OpenOCD is built from source, pass an additional -s option to specify
-# the location of 'tcl' directory:
-#
-#    src/openocd -s tcl <rest of the command line>
-#
-# Note:
-#   For ESP32-WROVER module use 'esp32-wrover.cfg' configuration file
-#   ESP-WROOM-32 and ESP32-WROVER have different flash voltage setting
-
-
-# The ESP32 only supports JTAG.
-transport select jtag
-
-# The speed of the JTAG interface, in KHz. If you get DSR/DIR errors (and they
-# do not relate to OpenOCD trying to read from a memory range without physical
-# memory being present there), you can try lowering this.
-#
-# On DevKit-J, this can go as high as 20MHz if CPU frequency is 80MHz, or 26MHz
-# if CPU frequency is 160MHz or 240MHz.
-adapter_khz 20000
-
-# If single core debugging is required, uncomment the following line
-# set ESP32_ONLYCPU 1
-
-# To disable RTOS support, uncomment the following line
-# set ESP32_RTOS none
-
-# Tell OpenOCD which SPI flash voltage is used by the board (3.3 or 1.8)
-# The TDI pin of ESP32 is also a bootstrap pin that selects the voltage the SPI flash
-# chip runs at. When a hard reset happens (e.g. because someone switches the board off
-# and on) the ESP32 will use the current TDI value as the bootstrap value because the
-# JTAG adapter overrides the pull-up or pull-down resistor that is supposed to do the
-# bootstrapping. These lines basically set the idle value of the TDI line to a
-# specified value, therefore reducing the chance of a bad bootup due to a bad flash
-# voltage greatly.
-# This option defaults to 3.3, if not set. To override the default, uncomment
-# the following line:
-# set ESP32_FLASH_VOLTAGE 1.8
-
-# Set semihosting I/O base dir
-# set ESP_SEMIHOST_BASEDIR ""
-
-# Source the ESP32 configuration file
-source [find target/esp32.cfg]

bin/meshtasticd.service

@@ -0,0 +1,12 @@
+[Unit]
+Description=Meshtastic Native Daemon
+After=network-online.target
+
+[Service]
+User=root
+Group=root
+Type=simple
+ExecStart=/usr/sbin/meshtasticd
+
+[Install]
+WantedBy=multi-user.target

bin/native-gdbserver.sh

@@ -0,0 +1,5 @@
+#!/usr/bin/env bash
+
+set -e
+pio run --environment native
+gdbserver --once localhost:2345 .pio/build/native/program "$@"

bin/native-install.sh

@@ -0,0 +1,10 @@
+#!/usr/bin/env bash
+
+cp "release/meshtasticd_linux_$(uname -m)" /usr/sbin/meshtasticd
+mkdir /etc/meshtasticd
+if [[ -f "/etc/meshtasticd/config.yaml" ]]; then
+	cp bin/config-dist.yaml /etc/meshtasticd/config-upgrade.yaml
+else
+	cp bin/config-dist.yaml /etc/meshtasticd/config.yaml
+fi
+cp bin/meshtasticd.service /usr/lib/systemd/system/meshtasticd.service

bin/native-run.sh

@@ -0,0 +1,5 @@
+#!/usr/bin/env bash
+
+set -e
+pio run --environment native
+.pio/build/native/program "$@"

bin/nrf52-console.sh

@@ -1,4 +0,0 @@
-
-
-# JLinkRTTViewer
-JLinkRTTClient

bin/nrf52-gdbserver.sh

@@ -1,3 +0,0 @@
-
-
-JLinkGDBServerCLExe -if SWD -select USB -port 2331 -device NRF52840_XXAA

bin/platformio-custom.py

@@ -0,0 +1,97 @@
+# trunk-ignore-all(ruff/F821)
+# trunk-ignore-all(flake8/F821): For SConstruct imports
+import sys
+from os.path import join
+
+from readprops import readProps
+
+Import("env")
+platform = env.PioPlatform()
+board = env.GetProjectOption("board")
+
+
+def esp32_create_combined_bin(source, target, env):
+    # this sub is borrowed from ESPEasy build toolchain. It's licensed under GPL V3
+    # https://github.com/letscontrolit/ESPEasy/blob/mega/tools/pio/post_esp32.py
+    print("Generating combined binary for serial flashing")
+
+    app_offset = 0x10000
+
+    new_file_name = env.subst("$BUILD_DIR/${PROGNAME}.factory.bin")
+    sections = env.subst(env.get("FLASH_EXTRA_IMAGES"))
+    firmware_name = env.subst("$BUILD_DIR/${PROGNAME}.bin")
+    chip = env.get("BOARD_MCU")
+    flash_size = env.BoardConfig().get("upload.flash_size")
+    flash_freq = env.BoardConfig().get("build.f_flash", "40m")
+    flash_freq = flash_freq.replace("000000L", "m")
+    flash_mode = env.BoardConfig().get("build.flash_mode", "dio")
+    memory_type = env.BoardConfig().get("build.arduino.memory_type", "qio_qspi")
+    if flash_mode == "qio" or flash_mode == "qout":
+        flash_mode = "dio"
+    if memory_type == "opi_opi" or memory_type == "opi_qspi":
+        flash_mode = "dout"
+    cmd = [
+        "--chip",
+        chip,
+        "merge_bin",
+        "-o",
+        new_file_name,
+        "--flash_mode",
+        flash_mode,
+        "--flash_freq",
+        flash_freq,
+        "--flash_size",
+        flash_size,
+    ]
+
+    print("    Offset | File")
+    for section in sections:
+        sect_adr, sect_file = section.split(" ", 1)
+        print(f" -  {sect_adr} | {sect_file}")
+        cmd += [sect_adr, sect_file]
+
+    print(f" - {hex(app_offset)} | {firmware_name}")
+    cmd += [hex(app_offset), firmware_name]
+
+    print("Using esptool.py arguments: %s" % " ".join(cmd))
+
+    esptool.main(cmd)
+
+
+if platform.name == "espressif32":
+    sys.path.append(join(platform.get_package_dir("tool-esptoolpy")))
+    import esptool
+
+    env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", esp32_create_combined_bin)
+
+    esp32_kind = env.GetProjectOption("custom_esp32_kind")
+    if esp32_kind == "esp32":
+        # Free up some IRAM by removing auxiliary SPI flash chip drivers.
+        # Wrapped stub symbols are defined in src/platform/esp32/iram-quirk.c.
+        env.Append(
+            LINKFLAGS=[
+                "-Wl,--wrap=esp_flash_chip_gd",
+                "-Wl,--wrap=esp_flash_chip_issi",
+                "-Wl,--wrap=esp_flash_chip_winbond",
+            ]
+        )
+    else:
+        # For newer ESP32 targets, using newlib nano works better.
+        env.Append(LINKFLAGS=["--specs=nano.specs", "-u", "_printf_float"])
+    if board == "ttgo-t-beam":
+        print("patching esp32 libs")
+        env.Execute("tar -xvf bin/arduino-esp32-libs-release_*tar.gz -C ~/.platformio/packages/framework-arduinoespressif32/")
+
+Import("projenv")
+
+prefsLoc = projenv["PROJECT_DIR"] + "/version.properties"
+verObj = readProps(prefsLoc)
+print("Using meshtastic platformio-custom.py, firmware version " + verObj["long"])
+
+# General options that are passed to the C and C++ compilers
+projenv.Append(
+    CCFLAGS=[
+        "-DAPP_VERSION=" + verObj["long"],
+        "-DAPP_VERSION_SHORT=" + verObj["short"],
+    ]
+)

bin/program-release-heltec.sh

@@ -1,6 +0,0 @@
-
-set -e
-
-source bin/version.sh
-
-esptool.py --baud 921600 write_flash 0x10000 release/latest/bins/firmware-heltec-US-$VERSION.bin

bin/program-release-tbeam.sh

@@ -1,6 +0,0 @@
-
-set -e
-
-source bin/version.sh
-
-esptool.py --baud 921600 write_flash 0x10000 release/latest/bins/firmware-tbeam-US-$VERSION.bin

bin/promote-release.sh

@@ -0,0 +1,14 @@
+#!/usr/bin/env bash
+
+set -e 
+
+echo "This script is only for developers who are publishing new builds on github.  Most users don't need it"
+
+VERSION=`bin/buildinfo.py long`
+
+# Must have a V prefix to trigger github
+git tag "v${VERSION}"
+
+git push origin "v${VERSION}" # push the tag
+
+echo "Tag ${VERSION} pushed to github, github actions should now be building the draft release.  If it seems good, click to publish it"

bin/read-system-info.sh

@@ -1 +1,3 @@
-esptool.py --baud 921600 read_flash 0x1000 0xf000 system-info.img
+#!/usr/bin/env bash
+
+esptool.py --baud 115200 read_flash 0x1000 0xf000 system-info.img

bin/readprops.py

@@ -0,0 +1,37 @@
+
+
+import subprocess
+import configparser
+import traceback
+import sys
+
+
+def readProps(prefsLoc):
+    """Read the version of our project as a string"""
+
+    config = configparser.RawConfigParser()
+    config.read(prefsLoc)
+    version = dict(config.items('VERSION'))
+    verObj = dict(short = "{}.{}.{}".format(version["major"], version["minor"], version["build"]),
+        long = "unset")
+
+    # Try to find current build SHA if if the workspace is clean.  This could fail if git is not installed
+    try:
+        sha = subprocess.check_output(
+            ['git', 'rev-parse', '--short', 'HEAD']).decode("utf-8").strip()
+        isDirty = subprocess.check_output(
+            ['git', 'diff', 'HEAD']).decode("utf-8").strip()
+        suffix = sha
+        # if isDirty:
+        #     # short for 'dirty', we want to keep our verstrings source for protobuf reasons
+        #     suffix = sha + "-d"
+        verObj['long'] = "{}.{}.{}.{}".format(
+            version["major"], version["minor"], version["build"], suffix)
+    except:
+        # print("Unexpected error:", sys.exc_info()[0])
+        # traceback.print_exc()
+        verObj['long'] = verObj['short']
+
+    # print("firmware version " + verStr)
+    return verObj
+# print("path is" + ','.join(sys.path))

bin/regen-protos.bat

@@ -0,0 +1 @@
+cd protobufs && ..\nanopb-0.4.8\generator-bin\protoc.exe --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:..\src\mesh\generated" -I=..\protobufs\ ..\protobufs\meshtastic\*.proto

bin/regen-protos.sh

@@ -1,6 +1,11 @@
-#!/bin/bash
+#!/usr/bin/env bash
+
+set -e
+
+echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.8 to be located in the"
+echo "firmware root directory if the following step fails, you should download the correct"
+echo "prebuilt binaries for your computer into nanopb-0.4.8"
 
-echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.1"
 # the nanopb tool seems to require that the .options file be in the current directory!
-cd proto
+cd protobufs
-../../nanopb-0.4.1-linux-x86/generator-bin/protoc --nanopb_out=-v:../src/mesh -I=../proto mesh.proto
+../nanopb-0.4.8/generator-bin/protoc --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:../src/mesh/generated/" -I=../protobufs meshtastic/*.proto

bin/run-0-monitor.sh

@@ -1 +0,0 @@
-pio run --upload-port /dev/ttyUSB0 -t upload -t monitor

bin/run-1-monitor.sh

@@ -1 +0,0 @@
-pio run --upload-port /dev/ttyUSB1 -t upload -t monitor

bin/run-both-monitor.sh

@@ -1,7 +0,0 @@
-set -e 
-
-echo uploading to usb1
-pio run --upload-port /dev/ttyUSB1 -t upload
-
-echo uploading to usb0
-pio run --upload-port /dev/ttyUSB0 -t upload -t monitor

bin/run-openocd.sh

@@ -1,5 +0,0 @@
-
-
-# /home/kevinh/.platformio/packages/tool-openocd-esp32/bin/openocd -s /home/kevinh/.platformio/packages/tool-openocd-esp32 -c gdb_port pipe; tcl_port disabled; telnet_port disabled -s /home/kevinh/.platformio/packages/tool-openocd-esp32/share/openocd/scripts -f interface/jlink.cfg -f board/esp-wroom-32.cfg
-/home/kevinh/.platformio/packages/tool-openocd-esp32/bin/openocd -s /home/kevinh/.platformio/packages/tool-openocd-esp32 -s /home/kevinh/.platformio/packages/tool-openocd-esp32/share/openocd/scripts -f interface/jlink.cfg -f ./lora32-openocd.cfg
-

bin/setup-python-for-esp-debug.sh

@@ -0,0 +1,12 @@
+# shellcheck shell=bash
+# (this minor script is actually shell agnostic, and is intended to be sourced rather than run in a subshell)
+
+# This is a little script you can source if you want to make ESP debugging work on a modern (24.04) ubuntu machine
+# It assumes you have built and installed python 2.7 from source with:
+# ./configure --enable-optimizations --enable-shared --enable-unicode=ucs4
+# sudo make clean
+# make
+# sudo make altinstall
+
+export LD_LIBRARY_PATH=$HOME/packages/python-2.7.18/
+export PYTHON_HOME=/usr/local/lib/python2.7/

bin/start-terminal0.sh

@@ -1 +0,0 @@
-pio device monitor -b 921600