Merge pull request #1971 from GUVWAF/master

Cover two ACK/NAK edge cases for admin packets

.clang-format

@@ -0,0 +1,6 @@
+Language: Cpp
+IndentWidth: 4
+ColumnLimit: 130
+PointerAlignment: Right
+BreakBeforeBraces: Linux
+AllowShortFunctionsOnASingleLine: Inline

.github/ISSUE_TEMPLATE/Bug Report.yml

@@ -0,0 +1,76 @@
+name: Bug Report
+description: File a bug report
+title: "[Bug]: "
+labels: ["bug", "triage"]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Thanks for taking the time to fill out this bug report!
+
+  - type: dropdown
+    id: category
+    attributes:
+      label: Category
+      description: How would you catagorize this issue?
+      multiple: true
+      options:
+        - Hardware Compatibility
+        - BLE
+        - Serial
+        - WiFi
+        - Other
+    validations:
+      required: true
+
+  - type: dropdown
+    id: hardware
+    attributes:
+      label: Hardware
+      description: What hardware are you encountering this issue on?
+      multiple: true
+      options:
+        - Not Applicable
+        - T-Beam
+        - T-Beam 0.7
+        - T-Lora v1
+        - T-Lora v1.3
+        - T-Lora v2 1.6
+        - T-Echo
+        - Rak4631
+        - Rak11200
+        - Heltec v1
+        - Heltec v2
+        - Heltec v2.1
+        - Relay v1
+        - Relay v2
+        - DIY
+        - Other
+    validations:
+      required: true
+
+  - type: input
+    id: version
+    attributes:
+      label: Firmware Version
+      description: This can be found on the device's screen or via one of the apps.
+      placeholder: x.x.x.yyyyyyy
+    validations:
+      required: true
+
+  - type: textarea
+    id: body
+    attributes:
+      label: Description
+      description: Please provide details on what steps you performed for this to happen.
+    validations:
+      required: true
+
+  - type: textarea
+    id: logs
+    attributes:
+      label: Relevant log output
+      description: If you have any log output to help in diagnosing your bug, please provide it here.
+      render: Shell
+    validations:
+      required: false

.github/ISSUE_TEMPLATE/New Board.yml

@@ -0,0 +1,46 @@
+name: New Board
+description: Request us to support new hardware
+title: "[Board]: "
+labels: ["enhancement", "triage"]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Thanks for requesting a new board, this will not gurantee that we will support it, but will be on our radar.
+
+  - type: dropdown
+    id: soc
+    attributes:
+      label: SOC
+      description: What SOC does your board have?
+      multiple: true
+      options:
+        - NRF52
+        - ESP32
+        - Other
+    validations:
+      required: true
+
+  - type: input
+    id: lora
+    attributes:
+      label: Lora IC
+      description: What LoRa IC does the board have?
+    validations:
+      required: true
+      
+  - type: input
+    id: link
+    attributes:
+      label: Product Link
+      description: Where can we find this product?
+    validations:
+      required: true
+
+  - type: textarea
+    id: body
+    attributes:
+      label: Description
+      description: Please provide any further details you think we may need.
+    validations:
+      required: true

.github/actions/setup-base/action.yml

@@ -0,0 +1,41 @@
+name: 'Setup Build Base Composite Action'
+description: 'Base build actions for Meshtastic Platform IO steps'
+
+runs:
+  using: "composite"
+  steps:
+    - name: Checkout code
+      uses: actions/checkout@v3
+      with:
+        submodules: "recursive"
+        ref: ${{github.event.pull_request.head.ref}}
+        repository: ${{github.event.pull_request.head.repo.full_name}}
+    
+    - name: Install cppcheck
+      shell: bash
+      run: |
+        sudo apt-get install -y cppcheck
+
+    - name: Setup Python
+      uses: actions/setup-python@v4
+      with:
+        python-version: 3.x
+
+    - name: Cache python libs
+      uses: actions/cache@v3
+      id: cache-pip # needed in if test
+      with:
+        path: ~/.cache/pip
+        key: ${{ runner.os }}-pip
+
+    - name: Upgrade python tools
+      shell: bash
+      run: |
+        python -m pip install --upgrade pip
+        pip install -U platformio adafruit-nrfutil
+        pip install -U meshtastic --pre
+
+    - name: Upgrade platformio
+      shell: bash
+      run: |
+        pio upgrade

.github/pull_request_template.md

@@ -0,0 +1,13 @@
+## Thank you for sending in a pull request, here's some tips to get started!
+
+(Please delete all these tips and replace with your text)
+
+- Before starting on some new big chunk of code, it it is optional but highly recommended to open an issue first
+  to say "hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
+  is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
+- Please do not check in files that don't have real changes
+- Please do not reformat lines that you didn't have to change the code on
+- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor and the 'clang-format' extension,
+  because automatically follows our indentation rules and it's auto reformatting will not cause spurious changes to lines.
+- If your PR fixes a bug, mention "fixes #bugnum" somewhere in your pull request description.
+- If your other co-developers have comments on your PR please tweak as needed.

.github/workflows/build_esp32.yml

@@ -0,0 +1,54 @@
+name: Build ESP32
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+jobs: 
+  build-esp32:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v3
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
+
+      - name: Pull web ui
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: "meshtastic/web"
+          file: "build.tar"
+          target: "build.tar"
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Unpack web ui
+        run: |
+          tar -xf build.tar -C data/static
+          rm build.tar
+
+      - name: Build ESP32
+        run: bin/build-esp32.sh ${{ inputs.board }}
+
+      - name: Pull OTA Firmware
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: "meshtastic/firmware-ota"
+          file: "firmware.bin"
+          target: "release/bleota.bin"
+          token: ${{ secrets.GITHUB_TOKEN }}
+      
+      - name: Get release version string
+        shell: bash
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v3
+        with:
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          path: |
+            release/*.bin
+            release/*.elf

.github/workflows/build_nrf52.yml

@@ -0,0 +1,33 @@
+name: Build NRF52
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+jobs: 
+  build-nrf52:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v3
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
+
+      - name: Build NRF52
+        run: bin/build-nrf52.sh ${{ inputs.board }}
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v3
+        with:
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          path: |
+            release/*.uf2
+            release/*.elf
+            release/*.zip

.github/workflows/build_rpi2040.yml

@@ -0,0 +1,32 @@
+name: Build RPI2040
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+jobs: 
+  build-rpi2040:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v3
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
+
+      - name: Build Raspberry Pi 2040
+        run: ./bin/build-rpi2040.sh ${{ inputs.board }}
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v3
+        with:
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          path: |
+            release/*.uf2
+            release/*.elf

.github/workflows/main.yml

@@ -1,19 +0,0 @@
-name: Continuous Integration
-on: push
-
-jobs:
-  main:
-    name: Main
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@master
-      - name: Setup Python
-        uses: actions/setup-python@master
-        with:
-          python-version: 3.x
-      - name: Install Platform IO
-        run: |
-          python -m pip install --upgrade pip
-          pip install -U platformio
-      - name: Build
-        run: platformio run

.github/workflows/main_matrix.yml

@@ -0,0 +1,317 @@
+name: CI
+on:
+  # # Triggers the workflow on push but only for the master branch
+  push:
+    branches: [master, develop]
+    paths-ignore:
+      - "**.md"
+      - "version.properties"
+
+  # Note: This is different from "pull_request". Need to specify ref when doing checkouts.
+  pull_request_target:
+    branches: [master, develop]
+    paths-ignore:
+      - "**.md"
+      #- "**.yml"
+
+  workflow_dispatch:
+
+jobs:
+  check:
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          - board: rak11200
+          - board: tlora-v2-1-1.6
+          - board: tbeam
+          - board: heltec-v2.1
+          - board: meshtastic-diy-v1
+          - board: rak4631
+          - board: t-echo
+          - board: station-g1
+          - board: m5stack-coreink
+          - board: tbeam-s3-core
+
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v3
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
+
+      - name: Check ${{ matrix.board }}
+        run: bin/check-all.sh ${{ matrix.board }}
+
+  build-esp32:
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          - board: rak11200
+          - board: tlora-v2
+          - board: tlora-v1
+          - board: tlora_v1_3
+          - board: tlora-v2-1-1.6
+          - board: tbeam
+          - board: heltec-v1
+          - board: heltec-v2.0
+          - board: heltec-v2.1
+          - board: heltec-v3
+          - board: heltec-wsl-v3
+          - board: tbeam0.7
+          - board: meshtastic-diy-v1
+          - board: meshtastic-dr-dev
+          - board: nano-g1
+          - board: station-g1
+          - board: m5stack-core
+          - board: m5stack-coreink
+          - board: tbeam-s3-core
+    uses: ./.github/workflows/build_esp32.yml
+    with:
+      board: ${{ matrix.board }}
+
+  build-nrf52:
+    strategy:
+      fail-fast: false
+      max-parallel: 2
+      matrix:
+        include:
+          - board: rak4631
+          - board: rak4631_eink
+          - board: t-echo
+          - board: pca10059_diy_eink
+          - board: feather_diy
+    uses: ./.github/workflows/build_nrf52.yml
+    with:
+      board: ${{ matrix.board }}
+
+  build-rpi2040:
+    strategy:
+      fail-fast: false
+      max-parallel: 2
+      matrix:
+        include:
+          - board: pico
+    uses: ./.github/workflows/build_rpi2040.yml
+    with:
+      board: ${{ matrix.board }}
+
+  build-native:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v3
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
+
+      # We now run integration test before other build steps (to quickly see runtime failures)
+      - name: Build for native
+        run: platformio run -e native
+      - name: Integration test
+        run: |
+          .pio/build/native/program &
+          sleep 20 # 5 seconds was not enough
+          echo "Simulator started, launching python test..."
+          python3 -c 'from meshtastic.test import testSimulator; testSimulator()'
+
+      - name: Build Native
+        run: bin/build-native.sh
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v3
+        with:
+          name: firmware-native-${{ steps.version.outputs.version }}.zip
+          path: |
+            release/meshtasticd_linux_amd64
+            release/device-*.sh
+            release/device-*.bat
+      
+      - name: Docker login
+        if: ${{ github.event_name == 'workflow_dispatch' }}
+        uses: docker/login-action@v2
+        with: 
+          username: meshtastic
+          password: ${{ secrets.DOCKER_TOKEN }}
+
+      - name: Docker setup
+        if: ${{ github.event_name == 'workflow_dispatch' }}
+        uses: docker/setup-buildx-action@v2
+
+      - name: Docker build and push
+        if: ${{ github.event_name == 'workflow_dispatch' }}
+        uses: docker/build-push-action@v3
+        with:
+          context: .
+          file: ./Dockerfile
+          push: true
+          tags: meshtastic/device-simulator:latest
+      
+  after-checks:
+    runs-on: ubuntu-latest
+    needs: [check]
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v3
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+  gather-artifacts:
+    runs-on: ubuntu-latest
+    needs: [build-esp32, build-nrf52, build-native, build-rpi2040]
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v3
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - uses: actions/download-artifact@v3
+        with:
+          path: ./
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Move files up
+        run: mv -b -t ./ ./*tbeam-2*/littlefs*.bin ./*tbeam-2*/bleota.bin ./**/firmware*.bin ./*t-echo*/Meshtastic_nRF52_factory_erase.uf2 ./**/firmware-*.uf2 ./**/firmware-*-ota.zip ./**/*.elf ./**/meshtasticd_linux_amd64 ./*native*/*device-*.sh ./*native*/*device-*.bat
+
+      - name: Repackage in single firmware zip
+        uses: actions/upload-artifact@v3
+        with:
+          name: firmware-${{ steps.version.outputs.version }}
+          path: |
+            ./*.bin
+            ./*.uf2
+            ./firmware-*-ota.zip
+            ./meshtasticd_linux_amd64
+            ./device-*.sh
+            ./device-*.bat
+          retention-days: 90
+
+      - uses: actions/download-artifact@v3
+        with:
+          name: firmware-${{ steps.version.outputs.version }}
+          path: ./output
+
+      # For diagnostics
+      - name: Show artifacts
+        run: ls -lR
+
+      - name: Device scripts permissions
+        run: |
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
+
+      - name: Zip firmware
+        run: zip -j -r ./firmware-${{ steps.version.outputs.version }}.zip ./output
+
+      - name: Repackage in single elfs zip
+        uses: actions/upload-artifact@v3
+        with:
+          name: debug-elfs-${{ steps.version.outputs.version }}.zip
+          path: ./*.elf
+          retention-days: 30
+
+      - name: Create request artifacts
+        if: ${{ github.event_name == 'pull_request_target' || github.event_name == 'pull_request' }}
+        uses: gavv/pull-request-artifacts@v1.0.0
+        with:
+          commit: ${{ (github.event.pull_request_target || github.event.pull_request).head.sha }}
+          repo-token: ${{ secrets.GITHUB_TOKEN }}
+          artifacts-token: ${{ secrets.ARTIFACTS_TOKEN }}
+          artifacts-repo: meshtastic/artifacts
+          artifacts-branch: device
+          artifacts-dir: pr
+          artifacts: ./firmware-${{ steps.version.outputs.version }}.zip
+
+  release-artifacts:
+    runs-on: ubuntu-latest
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    needs: [gather-artifacts, after-checks]
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+
+      - name: Setup Python
+        uses: actions/setup-python@v4
+        with:
+          python-version: 3.x
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - uses: actions/download-artifact@v3
+        with:
+          name: firmware-${{ steps.version.outputs.version }}
+          path: ./output
+
+      - name: Device scripts permissions
+        run: |
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
+
+      - name: Zip firmware
+        run: zip -j -r ./firmware-${{ steps.version.outputs.version }}.zip ./output
+
+      - uses: actions/download-artifact@v3
+        with:
+          name: debug-elfs-${{ steps.version.outputs.version }}.zip
+          path: ./elfs
+
+      - name: Zip Elfs
+        run: zip -j -r ./debug-elfs-${{ steps.version.outputs.version }}.zip ./elfs
+
+      # For diagnostics
+      - name: Show artifacts
+        run: ls -lR
+
+      - name: Create release
+        uses: actions/create-release@v1
+        id: create_release
+        with:
+          draft: true
+          prerelease: true
+          release_name: Meshtastic Firmware ${{ steps.version.outputs.version }}
+          tag_name: v${{ steps.version.outputs.version }}
+          body: |
+            Autogenerated by github action, developer should edit as required before publishing...
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+
+      - name: Add bins to release
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./firmware-${{ steps.version.outputs.version }}.zip
+          asset_name: firmware-${{ steps.version.outputs.version }}.zip
+          asset_content_type: application/zip
+
+      - name: Add debug elfs to release
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./debug-elfs-${{ steps.version.outputs.version }}.zip
+          asset_name: debug-elfs-${{ steps.version.outputs.version }}.zip
+          asset_content_type: application/zip
+
+      - name: Bump version.properties
+        run: >-
+          bin/bump_version.py
+
+      - name: Create version.properties pull request
+        uses: peter-evans/create-pull-request@v3
+        with:
+          add-paths: |
+            version.properties

.github/workflows/sec_sast_flawfinder.yml

@@ -0,0 +1,40 @@
+---
+name: Flawfinder Scan
+
+on:
+  push:
+    branches: [master, develop]
+    paths-ignore:
+      - "**.md"
+      - "version.properties"
+
+jobs:
+  flawfinder:
+      runs-on: ubuntu-latest
+      name: Flawfinder
+
+      steps:
+        # step 1
+        - name: clone application source code
+          uses: actions/checkout@v3
+
+        # step 2
+        - name: flawfinder_scan
+          uses: david-a-wheeler/flawfinder@2.0.19
+          with:
+            arguments: '--sarif ./'
+            output: 'flawfinder_report.sarif'
+
+        # step 3
+        - name: save report as pipeline artifact
+          uses: actions/upload-artifact@v3
+          with:
+            name: flawfinder_report.sarif
+            path: flawfinder_report.sarif
+
+        # step 4
+        - name: publish code scanning alerts
+          uses: github/codeql-action/upload-sarif@v2
+          with:
+            sarif_file: flawfinder_report.sarif
+            category: flawfinder

.github/workflows/sec_sast_semgrep_cron.yml

@@ -0,0 +1,44 @@
+---
+name: Semgrep Full Scan
+
+on:
+  workflow_dispatch:
+    branches:
+      - master
+  schedule:
+    - cron:  '0 1 * * 6'
+
+jobs:
+
+  semgrep-full:
+      runs-on: ubuntu-latest
+      container:
+        image: returntocorp/semgrep
+
+      steps:
+
+        # step 1
+        - name: clone application source code
+          uses: actions/checkout@v3
+
+        # step 2
+        - name: full scan
+          run: |
+            semgrep \
+              --sarif --output report.sarif \
+              --metrics=off \
+              --config="p/default"
+
+        # step 3
+        - name: save report as pipeline artifact
+          uses: actions/upload-artifact@v3
+          with:
+            name: report.sarif
+            path: report.sarif
+
+        # step 4
+        - name: publish code scanning alerts
+          uses: github/codeql-action/upload-sarif@v2
+          with:
+            sarif_file: report.sarif
+            category: semgrep

.github/workflows/sec_sast_semgrep_pull.yml

@@ -0,0 +1,28 @@
+---
+name: Semgrep Differential Scan
+on:
+  pull_request
+
+jobs:
+
+  semgrep-diff:
+    runs-on: ubuntu-latest
+    container:
+      image: returntocorp/semgrep
+
+    steps:
+
+      # step 1
+      - name: clone application source code
+        uses: actions/checkout@v3
+        with:
+          fetch-depth: 0
+
+      # step 2
+      - name: differential scan
+        run: |
+          semgrep scan \
+            --error \
+            --metrics=off \
+            --baseline-commit ${{ github.event.pull_request.base.sha }} \
+            --config="p/default"

.github/workflows/update_protobufs.yml

@@ -0,0 +1,33 @@
+name: "Update protobufs and regenerate classes"
+on: workflow_dispatch
+
+jobs:
+  update-protobufs:
+    runs-on: ubuntu-latest
+
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v3
+        with:
+          submodules: true
+
+      - name: Update submodule
+        run: |
+          git submodule update --remote protobufs
+
+      - name: Download nanopb
+        run: |
+          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.6-linux-x86.tar.gz
+          tar xvzf nanopb-0.4.6-linux-x86.tar.gz
+          mv nanopb-0.4.6-linux-x86 nanopb-0.4.6
+
+      - name: Re-generate protocol buffers
+        run: |
+          ./bin/regen-protos.sh
+
+      - name: Create pull request
+        uses: peter-evans/create-pull-request@v3
+        with:
+          add-paths: |
+            protobufs
+            src/mesh

.gitignore

@@ -6,6 +6,26 @@ main/credentials.h
 .vscode/*
 !.vscode/settings.json
 !.vscode/tasks.json
-!.vscode/launch.json
 !.vscode/extensions.json
-*.code-workspace
+*.code-workspace
+
+.idea
+
+.DS_Store
+Thumbs.db
+.autotools
+.built
+.context
+.cproject
+.vagrant
+nanopb*
+flash.uf2
+cmake-build*
+__pycache__
+
+*.swp
+*.swo
+*~
+
+venv/
+release/

.gitmodules

@@ -1,3 +1,4 @@
-[submodule "proto"]
-	path = proto
-	url = https://github.com/meshtastic/Meshtastic-protobufs.git
+[submodule "protobufs"]
+	path = protobufs
+	url = https://github.com/meshtastic/protobufs.git
+	branch = develop

.semgrepignore

@@ -0,0 +1,2 @@
+.github/workflows/main_matrix.yml
+src/mesh/compression/unishox2.c

.vscode/extensions.json

@@ -1,7 +1,11 @@
-{
-    // See http://go.microsoft.com/fwlink/?LinkId=827846
-    // for the documentation about the extensions.json format
-    "recommendations": [
-        "platformio.platformio-ide"
-    ]
-}
+{
+    // See http://go.microsoft.com/fwlink/?LinkId=827846
+    // for the documentation about the extensions.json format
+    "recommendations": [
+        "platformio.platformio-ide",
+        "xaver.clang-format"
+    ],
+    "unwantedRecommendations": [
+        "ms-vscode.cpptools-extension-pack"
+    ]
+}

.vscode/launch.json

@@ -1,32 +0,0 @@
-// AUTOMATICALLY GENERATED FILE. PLEASE DO NOT MODIFY IT MANUALLY
-
-// PIO Unified Debugger
-//
-// Documentation: https://docs.platformio.org/page/plus/debugging.html
-// Configuration: https://docs.platformio.org/page/projectconf/section_env_debug.html
-
-{
-    "version": "0.2.0",
-    "configurations": [
-        {
-            "type": "platformio-debug",
-            "request": "launch",
-            "name": "PIO Debug",
-            "executable": "/home/kevinh/development/meshtastic/meshtastic-esp32/.pio/build/esp32/firmware.elf",
-            "toolchainBinDir": "/home/kevinh/.platformio/packages/toolchain-xtensa32/bin",
-            "preLaunchTask": {
-                "type": "PlatformIO",
-                "task": "Pre-Debug"
-            },
-            "internalConsoleOptions": "openOnSessionStart"
-        },
-        {
-            "type": "platformio-debug",
-            "request": "launch",
-            "name": "PIO Debug (skip Pre-Debug)",
-            "executable": "/home/kevinh/development/meshtastic/meshtastic-esp32/.pio/build/esp32/firmware.elf",
-            "toolchainBinDir": "/home/kevinh/.platformio/packages/toolchain-xtensa32/bin",
-            "internalConsoleOptions": "openOnSessionStart"
-        }
-    ]
-}

.vscode/settings.json

@@ -42,11 +42,39 @@
         "typeinfo": "cpp",
         "string": "cpp",
         "*.xbm": "cpp",
-        "list": "cpp"
+        "list": "cpp",
+        "atomic": "cpp",
+        "memory_resource": "cpp",
+        "optional": "cpp",
+        "string_view": "cpp",
+        "cassert": "cpp",
+        "iterator": "cpp",
+        "shared_mutex": "cpp",
+        "iostream": "cpp",
+        "esp_nimble_hci.h": "c",
+        "map": "cpp",
+        "random": "cpp",
+        "*.tpp": "cpp"
     },
     "cSpell.words": [
+        "Blox",
+        "EINK",
+        "HFSR",
         "Meshtastic",
+        "NEMAGPS",
+        "NMEAGPS",
+        "RDEF",
+        "Ublox",
+        "bkpt",
+        "cfsr",
         "descs",
-        "protobufs"
-    ]
+        "ocrypto",
+        "protobufs",
+        "wifi"
+    ],
+    "C_Cpp.dimInactiveRegions": true,
+    "cmake.configureOnOpen": true,
+    "protoc": {
+        "compile_on_save": false,
+    }
 }

.vscode/tasks.json

@@ -0,0 +1,17 @@
+{
+	"version": "2.0.0",
+	"tasks": [
+		{
+			"type": "PlatformIO",
+			"task": "Build",
+			"problemMatcher": [
+				"$platformio"
+			],
+			"group": {
+				"kind": "build",
+				"isDefault": true
+			},
+			"label": "PlatformIO: Build"
+		}
+	]
+}

Dockerfile

@@ -0,0 +1,41 @@
+FROM debian:bullseye-slim AS builder
+
+ENV DEBIAN_FRONTEND=noninteractive
+ENV TZ=Etc/UTC
+
+# http://bugs.python.org/issue19846
+# > At the moment, setting "LANG=C" on a Linux system *fundamentally breaks Python 3*, and that's not OK.
+ENV LANG C.UTF-8
+
+SHELL ["/bin/bash", "-o", "pipefail", "-c"]
+
+# Install build deps
+USER root
+RUN apt-get update && \
+	apt-get -y install wget python3 g++ zip python3-venv git vim ca-certificates
+
+# create a non-priveleged user & group
+RUN groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh
+
+USER mesh
+RUN wget https://raw.githubusercontent.com/platformio/platformio-core-installer/master/get-platformio.py -qO /tmp/get-platformio.py && \
+	chmod +x /tmp/get-platformio.py && \
+	python3 /tmp/get-platformio.py && \
+	git clone https://github.com/meshtastic/firmware --recurse-submodules /tmp/firmware && \
+	cd /tmp/firmware && \
+	chmod +x /tmp/firmware/bin/build-native.sh && \
+	source ~/.platformio/penv/bin/activate && \
+	./bin/build-native.sh
+
+FROM frolvlad/alpine-glibc
+
+RUN apk --update add --no-cache g++ shadow && \
+	groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh
+
+COPY --from=builder /tmp/firmware/release/meshtasticd_linux_amd64 /home/mesh/
+
+USER mesh
+WORKDIR /home/mesh
+CMD sh -cx "./meshtasticd_linux_amd64 --hwid '$RANDOM'"
+
+HEALTHCHECK NONE

README.md

@@ -1,90 +1,18 @@
-# Meshtastic-esp32
-This is the device side code for the [meshtastic.org](https://www.meshtastic.org) project.  
+# Meshtastic Firmware
 
-![Continuous Integration](https://github.com/meshtastic/Meshtastic-esp32/workflows/Continuous%20Integration/badge.svg)
+![GitHub release downloads](https://img.shields.io/github/downloads/meshtastic/firmware/total)
+[![CI](https://img.shields.io/github/workflow/status/meshtastic/firmware/CI?label=actions&logo=github&color=yellow)](https://github.com/meshtastic/firmware/actions/workflows/main_matrix.yml)
+[![CLA assistant](https://cla-assistant.io/readme/badge/meshtastic/firmware)](https://cla-assistant.io/meshtastic/firmware)
+[![Fiscal Contributors](https://opencollective.com/meshtastic/tiers/badge.svg?label=Fiscal%20Contributors&color=deeppink)](https://opencollective.com/meshtastic/)
+[![Vercel](https://img.shields.io/static/v1?label=Powered%20by&message=Vercel&style=flat&logo=vercel&color=000000)](https://vercel.com?utm_source=meshtastic&utm_campaign=oss)
 
-Meshtastic is a project that lets you use
-inexpensive GPS mesh radios as an extensible, super long battery life mesh GPS communicator.  These radios are great for hiking, skiing, paragliding - 
-essentially any hobby where you don't have reliable internet access.  Each member of your private mesh can always see the location and distance of all other
-members and any text messages sent to your group chat.
+## Overview
 
-The radios automatically create a mesh to forward packets as needed, so everyone in the group can receive messages from even the furthest member.  The radios
-will optionally work with your phone, but no phone is required.
+This repository contains the device firmware for the Meshtastic project.
 
-Typical time between recharging the radios should be about eight days.
+**[Building Instructions](https://meshtastic.org/docs/development/firmware/build)**
+**[Flashing Instructions](https://meshtastic.org/docs/getting-started/flashing-firmware/)**
 
-This project is currently early-alpha, but if you have questions please join our chat [![Join the chat at https://gitter.im/Meshtastic/community](https://badges.gitter.im/Meshtastic/community.svg)](https://gitter.im/Meshtastic/community?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge&utm_content=badge).
+## Stats
 
-This software is 100% open source and developed by a group of hobbyist experimenters.  No warranty is provided, if you'd like to improve it - we'd love your help.  Please post in the chat.  
-
-## Supported hardware
-We currently support three models of radios.  The [TTGO T-Beam](https://www.aliexpress.com/item/4000119152086.html), [TTGO LORA32](https://www.banggood.com/LILYGO-TTGO-LORA32-868Mhz-SX1276-ESP32-Oled-Display-bluetooth-WIFI-Lora-Development-Module-Board-p-1248652.html?cur_warehouse=UK) and the [Heltec LoRa 32](https://heltec.org/project/wifi-lora-32/).  Most users should buy the T-Beam and a 18650 battery (total cost less than $35).  Make 
-sure to buy the frequency range which is legal for your country.  For the USA, you should buy the 915MHz version.  Getting a version that include a screen
-is optional, but highly recommended.
-
-See (meshtastic.org) for 3D printable cases.
-
-## Installing the firmware
-Prebuilt binaries for the supported radios is available in our [releases](https://github.com/meshtastic/Meshtastic-esp32/releases).  Your initial installation has to happen over USB from your Mac, Windows or Linux PC.   Once our software is installed, all future software updates happen over bluetooth from your phone.
-
-The instructions currently require a few commmand lines, but it should be pretty straightforward.  Please post comments on our group chat if you have problems or successes.  Steps to install:
-
-1. Purchase a radio (see above) with the correct frequencies for your country (915MHz for US or JP, 470MHz for CN, 870MHz for EU).
-2. Install "pip".  Pip is the python package manager we use to get the esptool installer app.  Instructions [here](https://www.makeuseof.com/tag/install-pip-for-python/).
-3. Run "pip install --upgrade esptool" to get esptool installed on your machine
-4. Connect your radio to your USB port
-5. Confirm that your device is talking to your PC by running "esptool.py chip_id".  The Heltec build also works on the TTGO LORA32 radio. You should see something like:
-```
-mydir$ esptool.py chip_id
-esptool.py v2.6
-Found 2 serial ports
-Serial port /dev/ttyUSB0
-Connecting....
-Detecting chip type... ESP32
-Chip is ESP32D0WDQ6 (revision 1)
-Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
-MAC: 24:6f:28:b5:36:71
-Uploading stub...
-Running stub...
-Stub running...
-Warning: ESP32 has no Chip ID. Reading MAC instead.
-MAC: 24:6f:28:b5:36:71
-Hard resetting via RTS pin...
-```
-6. Install the correct firmware for your board with "esptool.py write_flash 0x10000 firmware-_board_-_country_.bin".  For instance "esptool.py write_flash 0x10000 release/firmware-HELTEC-US-0.0.3.bin". You should see something like this:
-```
-~/development/meshtastic/meshtastic-esp32$ esptool.py write_flash 0x10000 release/firmware-HELTEC-US-0.0.3.bin 
-esptool.py v2.6
-Found 2 serial ports
-Serial port /dev/ttyUSB0
-Connecting......
-Detecting chip type... ESP32
-Chip is ESP32D0WDQ6 (revision 1)
-Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
-MAC: 24:6f:28:b5:36:71
-Uploading stub...
-Running stub...
-Stub running...
-Configuring flash size...
-Auto-detected Flash size: 8MB
-Compressed 1184800 bytes to 652635...
-Wrote 1184800 bytes (652635 compressed) at 0x00010000 in 57.6 seconds (effective 164.5 kbit/s)...
-Hash of data verified.
-
-Leaving...
-Hard resetting via RTS pin...
-```
-7. The board will boot and show the Meshtastic logo.
-8. Please post a comment on our chat so we know if these instructions worked for you ;-).  If you find bugs/have-questions post there also - we will be rapidly iterating over the next few weeks.
-
-## Meshtastic Android app
-The source code for the (optional) Meshtastic Android app is [here](https://github.com/meshtastic/Meshtastic-Android).  
-
-Alpha test builds are current available by opting into our alpha test group.  See (www.meshtastic.org) for instructions.  
-
-After our rate of change slows a bit, we will make beta builds available here (without needing to join the alphatest group):
-[![Download at https://play.google.com/store/apps/details?id=com.geeksville.mesh](https://play.google.com/intl/en_us/badges/static/images/badges/en_badge_web_generic.png)](https://play.google.com/store/apps/details?id=com.geeksville.mesh&referrer=utm_source%3Dgithub%26utm_medium%3Desp32-readme%26utm_campaign%3Dmeshtastic-esp32%2520readme%26anid%3Dadmob&pcampaignid=pcampaignidMKT-Other-global-all-co-prtnr-py-PartBadge-Mar2515-1)
-
-# Development
-
-We'd love to have you join us on this merry little project.  Please see our [development documents](./docs/software/sw-design.md) and join us on the gitter chat above.
+![Alt](https://repobeats.axiom.co/api/embed/a92f097d9197ae853e780ec53d7d126e545629ab.svg "Repobeats analytics image")

arch/esp32/esp32.ini

@@ -0,0 +1,52 @@
+; Common settings for ESP targes, mixin with extends = esp32_base
+[esp32_base]
+extends = arduino_base
+platform = platformio/espressif32@^5.2.0
+build_src_filter = 
+  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/>
+upload_speed = 921600
+debug_init_break = tbreak setup
+monitor_filters = esp32_exception_decoder
+board_build.filesystem = littlefs
+
+# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
+# See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
+# This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
+build_flags =
+  ${arduino_base.build_flags}
+  -Wall
+  -Wextra
+  -Isrc/platform/esp32
+  -std=c++11
+  -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG
+  -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
+  -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
+  -DAXP_DEBUG_PORT=Serial
+  -DCONFIG_BT_NIMBLE_ENABLED
+  -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
+  -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
+  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
+
+lib_deps =
+  ${arduino_base.lib_deps}
+  ${networking_base.lib_deps}
+  ${environmental_base.lib_deps}
+  https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
+  h2zero/NimBLE-Arduino@^1.4.0
+   https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
+
+lib_ignore = 
+  segger_rtt
+  ESP32 BLE Arduino
+
+; leave this commented out to avoid breaking Windows
+;upload_port = /dev/ttyUSB0
+;monitor_port = /dev/ttyUSB0
+
+; Please don't delete these lines. JM uses them.
+;upload_port = /dev/cu.SLAB_USBtoUART
+;monitor_port = /dev/cu.SLAB_USBtoUART
+
+; customize the partition table
+; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
+board_build.partitions = partition-table.csv

arch/esp32/esp32s3.ini

@@ -0,0 +1,45 @@
+[esp32s3_base]
+extends = arduino_base
+platform = platformio/espressif32@^5.2.0
+build_src_filter = 
+  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/>
+upload_speed = 961200
+monitor_speed = 115200
+debug_init_break = tbreak setup
+monitor_filters = esp32_exception_decoder
+board_build.filesystem = littlefs
+
+# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
+# See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
+# This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
+build_flags =
+  ${arduino_base.build_flags} 
+  -Wall 
+  -Wextra 
+  -Isrc/platform/esp32 
+  -std=c++11 
+  -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG 
+  -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG 
+  -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
+  -DAXP_DEBUG_PORT=Serial 
+  -DCONFIG_BT_NIMBLE_ENABLED 
+  -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2 
+  -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
+  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING  
+  
+lib_deps =
+  ${arduino_base.lib_deps}
+  ${networking_base.lib_deps}
+  ${environmental_base.lib_deps}
+  https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
+  h2zero/NimBLE-Arduino@^1.4.0
+  https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
+
+lib_ignore = 
+  segger_rtt
+  ESP32 BLE Arduino
+
+; customize the partition table
+; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
+board_build.partitions = partition-table.csv
+

arch/nrf52/nrf52.ini

@@ -0,0 +1,18 @@
+[nrf52_base]
+; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files
+platform = platformio/nordicnrf52@^9.4.0
+
+extends = arduino_base
+build_type = debug ; I'm debugging with ICE a lot now
+build_flags = 
+  ${arduino_base.build_flags} -Wno-unused-variable 
+  -Isrc/platform/nrf52
+build_src_filter = 
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mqtt/> -<platform/rp2040> -<mesh/eth/>
+lib_ignore =
+  BluetoothOTA
+  
+; Note: By default no lora device is created for this build - it uses a simulated interface
+[env:feather_nrf52832]
+extends = nrf52_base
+board = adafruit_feather_nrf52832  

arch/nrf52/nrf52840.ini

@@ -0,0 +1,14 @@
+[nrf52840_base]
+extends = nrf52_base
+build_flags = ${nrf52_base.build_flags} 
+lib_deps =
+  ${arduino_base.lib_deps}
+  ${environmental_base.lib_deps}
+  https://github.com/Kongduino/Adafruit_nRFCrypto.git#e31a8825ea3300b163a0a3c1ddd5de34e10e1371
+
+; Note: By default no lora device is created for this build - it uses a simulated interface
+[env:nrf52840dk]
+extends = nrf52840_base
+board = nrf52840_dk
+
+

arch/portduino/portduino.ini

@@ -0,0 +1,23 @@
+; The Portduino based sim environment on top of any host OS, all hardware will be simulated
+[portduino_base]
+platform = https://github.com/meshtastic/platform-native.git#develop
+framework = arduino
+build_src_filter = 
+  ${env.build_src_filter} 
+  -<platform/esp32/> 
+  -<nimble/> 
+  -<platform/nrf52/> 
+  -<platform/stm32wl/> 
+  -<platform/rp2040>
+  -<mesh/http/>
+  -<mesh/eth/>
+  -<modules/esp32>
+  -<modules/Telemetry>
+  +<../variants/portduino>
+lib_deps =
+  ${env.lib_deps}
+  ${networking_base.lib_deps}
+  rweather/Crypto@^0.4.0
+  ; jgromes/RadioLib@5.4.1
+  https://github.com/jgromes/RadioLib.git#63208f1e89d4dac6eedaafbe234bf90f1fd5402b ; 5.4.1 with some fixes, remove when 5.4.2 is released
+build_flags = ${arduino_base.build_flags} -Isrc/platform/portduino

arch/rp2040/rp2040.ini

@@ -0,0 +1,19 @@
+; Common settings for rp2040 Processor based targets
+[rp2040_base]
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git#5ce1a228e7cae453f366deb8962252b9b7356bbc
+extends = arduino_base
+board_build.core = earlephilhower
+board_build.filesystem_size = 0.5m
+build_flags = 
+  ${arduino_base.build_flags} -Wno-unused-variable 
+  -Isrc/platform/rp2040
+  -D__PLAT_RP2040__
+#  -D _POSIX_THREADS
+build_src_filter = 
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mqtt/> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/>
+lib_ignore =
+  BluetoothOTA
+lib_deps =
+  ${arduino_base.lib_deps}
+  ${environmental_base.lib_deps}
+  https://github.com/kokke/tiny-AES-c.git#f06ac37fc31dfdaca2e0d9bec83f90d5663c319b

arch/stm32/stm32wl5e.ini

@@ -0,0 +1,18 @@
+[stm32wl5e_base]
+platform = platformio/ststm32@^15.4.1
+board = generic_wl5e
+framework = arduino
+build_type = debug
+build_flags = 
+  ${arduino_base.build_flags}
+  -Isrc/platform/stm32wl -g
+  -DHAL_SUBGHZ_MODULE_ENABLED
+#  Arduino/PlatformIO framework-arduinoststm32 package does not presently have SUBGHZSPI support
+#  -DPIN_SPI_MOSI=PINSUBGHZSPIMOSI -DPIN_SPI_MISO=PINSUBGHZSPIMISO -DPIN_SPI_SCK=PINSUBGHZSPISCK
+build_src_filter = 
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<mqtt/> -<graphics> -<input> -<buzz> -<modules/Telemetry> -<platform/nrf52> -<platform/portduino> -<platform/rp2040>
+lib_deps =
+  ${env.lib_deps}
+  https://github.com/kokke/tiny-AES-c.git#f06ac37fc31dfdaca2e0d9bec83f90d5663c319b
+lib_ignore = 
+  mathertel/OneButton@^2.0.3

bin/build-all.sh

@@ -1,56 +0,0 @@
-#!/bin/bash
-
-set -e
-
-source bin/version.sh
-
-COUNTRIES="US EU CN JP"
-# COUNTRIES=US
-
-SRCMAP=.pio/build/esp32/output.map
-SRCBIN=.pio/build/esp32/firmware.bin
-OUTDIR=release/latest
-
-# We keep all old builds (and their map files in the archive dir)
-ARCHIVEDIR=release/archive 
-
-rm -f $OUTDIR/firmware*
-
-for COUNTRY in $COUNTRIES; do 
-
-    HWVERSTR="1.0-$COUNTRY"
-    COMMONOPTS="-DAPP_VERSION=$VERSION -DHW_VERSION_$COUNTRY -DHW_VERSION=$HWVERSTR -Wall -Wextra -Wno-missing-field-initializers -Isrc -Os -Wl,-Map,.pio/build/esp32/output.map -DAXP_DEBUG_PORT=Serial"
-
-    export PLATFORMIO_BUILD_FLAGS="-DT_BEAM_V10 $COMMONOPTS"
-    echo "Building with $PLATFORMIO_BUILD_FLAGS"
-    rm -f $SRCBIN $SRCMAP
-    pio run # -v
-    cp $SRCBIN $OUTDIR/firmware-TBEAM-$COUNTRY-$VERSION.bin
-    #cp $SRCMAP $ARCHIVEDIR/firmware-TBEAM-$COUNTRY-$VERSION.map
-
-    export PLATFORMIO_BUILD_FLAGS="-DHELTEC_LORA32 $COMMONOPTS"
-    rm -f $SRCBIN $SRCMAP
-    pio run # -v
-    cp $SRCBIN $OUTDIR/firmware-HELTEC-$COUNTRY-$VERSION.bin
-    #cp $SRCMAP $ARCHIVEDIR/firmware-HELTEC-$COUNTRY-$VERSION.map
-done
-
-# keep the bins in archive also
-cp $OUTDIR/firmware* $ARCHIVEDIR
-
-cat >$OUTDIR/curfirmwareversion.xml <<XML
-<?xml version="1.0" encoding="utf-8"?>
-
-<!-- This file is kept in source control because it reflects the last stable
-release.  It is used by the android app for forcing software updates.  Do not edit.
-Generated by bin/buildall.sh -->
-
-<resources>
-    <string name="cur_firmware_version">$VERSION</string>
-</resources>
-XML
-
-rm -f $ARCHIVEDIR/firmware-$VERSION.zip
-zip $ARCHIVEDIR/firmware-$VERSION.zip $OUTDIR/firmware-*-$VERSION.bin
-
-echo BUILT ALL

bin/build-esp32.sh

@@ -0,0 +1,36 @@
+#!/usr/bin/env bash
+
+set -e
+
+VERSION=`bin/buildinfo.py long`
+SHORT_VERSION=`bin/buildinfo.py short`
+
+OUTDIR=release/
+
+rm -f $OUTDIR/firmware*
+rm -r $OUTDIR/* || true
+
+# Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
+platformio pkg update 
+
+echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
+rm -f .pio/build/$1/firmware.*
+
+# The shell vars the build tool expects to find
+export APP_VERSION=$VERSION
+
+basename=firmware-$1-$VERSION
+
+pio run --environment $1 # -v
+SRCELF=.pio/build/$1/firmware.elf
+cp $SRCELF $OUTDIR/$basename.elf
+
+echo "Copying ESP32 bin file"
+SRCBIN=.pio/build/$1/firmware.factory.bin
+cp $SRCBIN $OUTDIR/$basename.bin
+
+echo "Building Filesystem for ESP32 targets"
+pio run --environment tbeam -t buildfs
+cp .pio/build/tbeam/littlefs.bin $OUTDIR/littlefs-$VERSION.bin
+cp bin/device-install.* $OUTDIR
+cp bin/device-update.* $OUTDIR

bin/build-native.sh

@@ -0,0 +1,23 @@
+#!/usr/bin/env bash
+
+set -e
+
+VERSION=`bin/buildinfo.py long`
+SHORT_VERSION=`bin/buildinfo.py short`
+
+OUTDIR=release/
+
+rm -f $OUTDIR/firmware*
+
+mkdir -p $OUTDIR/
+rm -r $OUTDIR/* || true
+
+# Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
+platformio pkg update 
+
+pio run --environment native
+cp .pio/build/native/program $OUTDIR/meshtasticd_linux_amd64
+
+cp bin/device-install.* $OUTDIR
+cp bin/device-update.* $OUTDIR
+

bin/build-nrf52.sh

@@ -0,0 +1,36 @@
+#!/usr/bin/env bash
+
+set -e
+
+VERSION=`bin/buildinfo.py long`
+SHORT_VERSION=`bin/buildinfo.py short`
+
+OUTDIR=release/
+
+rm -f $OUTDIR/firmware*
+rm -r $OUTDIR/* || true
+
+# Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
+platformio pkg update 
+
+echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
+rm -f .pio/build/$1/firmware.*
+
+# The shell vars the build tool expects to find
+export APP_VERSION=$VERSION
+
+basename=firmware-$1-$VERSION
+
+pio run --environment $1 # -v
+SRCELF=.pio/build/$1/firmware.elf
+DFUPKG=.pio/build/$1/firmware.zip
+cp $SRCELF $OUTDIR/$basename.elf
+cp $DFUPKG $OUTDIR/$basename-ota.zip
+
+echo "Generating NRF52 uf2 file"
+SRCHEX=.pio/build/$1/firmware.hex
+bin/uf2conv.py $SRCHEX -c -o $OUTDIR/$basename.uf2 -f 0xADA52840
+
+cp bin/device-install.* $OUTDIR
+cp bin/device-update.* $OUTDIR
+cp bin/*.uf2 $OUTDIR

bin/build-rpi2040.sh

@@ -0,0 +1,33 @@
+#!/usr/bin/env bash
+
+set -e
+
+VERSION=`bin/buildinfo.py long`
+SHORT_VERSION=`bin/buildinfo.py short`
+
+OUTDIR=release/
+
+rm -f $OUTDIR/firmware*
+rm -r $OUTDIR/* || true
+
+# Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
+platformio pkg update 
+
+echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
+rm -f .pio/build/$1/firmware.*
+
+# The shell vars the build tool expects to find
+export APP_VERSION=$VERSION
+
+basename=firmware-$1-$VERSION
+
+pio run --environment $1 # -v
+SRCELF=.pio/build/$1/firmware.elf
+cp $SRCELF $OUTDIR/$basename.elf
+
+echo "Copying uf2 file"
+SRCBIN=.pio/build/$1/firmware.uf2
+cp $SRCBIN $OUTDIR/$basename.uf2
+
+cp bin/device-install.* $OUTDIR
+cp bin/device-update.* $OUTDIR

bin/buildinfo.py

@@ -0,0 +1,9 @@
+#!/usr/bin/env python3
+import configparser
+import sys
+from readprops import readProps
+
+
+verObj = readProps('version.properties')
+propName = sys.argv[1]
+print(f"{verObj[propName]}")

bin/bump_version.py

@@ -0,0 +1,16 @@
+#!/usr/bin/env python
+"""Bump the version number"""
+
+lines = None
+
+with open('version.properties', 'r', encoding='utf-8') as f:
+    lines = f.readlines()
+
+with open('version.properties', 'w', encoding='utf-8') as f:
+    for line in lines:
+        if line.lstrip().startswith("build = "):
+            words = line.split(" = ")
+            ver = f'build = {int(words[1]) + 1}'
+            f.write(f'{ver}\n')
+        else:
+            f.write(line)

bin/check-all.sh

@@ -0,0 +1,26 @@
+#!/usr/bin/env bash
+
+# Note: This is a prototype for how we could add static code analysis to the CI.
+
+set -e
+
+VERSION=`bin/buildinfo.py long`
+
+# The shell vars the build tool expects to find
+export APP_VERSION=$VERSION
+
+if [[ $# -gt 0 ]]; then
+    # can override which environment by passing arg
+    BOARDS="$@"
+else
+    BOARDS="tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v1 heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 rak4631 rak4631_eink rak11200 t-echo pca10059_diy_eink"
+fi
+
+echo "BOARDS:${BOARDS}"
+
+CHECK=""
+for BOARD in $BOARDS; do
+     CHECK="${CHECK} -e ${BOARD}"
+done
+
+pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt" $CHECK --skip-packages --pattern="src/" --fail-on-defect=low --fail-on-defect=medium --fail-on-defect=high

bin/check-dependencies.sh

@@ -0,0 +1,23 @@
+#!/usr/bin/env bash
+
+# Note: This is a prototype for how we could add static code analysis to the CI.
+
+set -e
+
+if [[ $# -gt 0 ]]; then
+    # can override which environment by passing arg
+    BOARDS="$@"
+else
+    BOARDS="rak4631 rak4631_eink t-echo pca10059_diy_eink pico rak11200 tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v1 heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 nano-g1 station-g1 m5stack-core m5stack-coreink tbeam-s3-core"
+fi
+
+echo "BOARDS:${BOARDS}"
+
+CHECK=""
+for BOARD in $BOARDS; do
+     CHECK="${CHECK} -e ${BOARD}"
+done
+
+echo $CHECK
+
+pio pkg outdated -e $CHECK

bin/device-install.bat

@@ -0,0 +1,42 @@
+@ECHO OFF
+
+set PYTHON=python
+
+goto GETOPTS
+:HELP
+echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME]
+echo Flash image file to device, but first erasing and writing system information
+echo.
+echo     -h               Display this help and exit
+echo     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerrous).
+echo     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: %PYTHON%)
+echo     -f FILENAME      The .bin file to flash.  Custom to your device type and region.
+goto EOF
+
+:GETOPTS
+if /I "%1"=="-h" goto HELP
+if /I "%1"=="--help" goto HELP
+if /I "%1"=="-F" set "FILENAME=%2" & SHIFT
+if /I "%1"=="-p" set ESPTOOL_PORT=%2 & SHIFT
+if /I "%1"=="-P" set PYTHON=%2 & SHIFT
+SHIFT
+IF NOT "__%1__"=="____" goto GETOPTS
+
+IF "__%FILENAME%__" == "____" (
+    echo "Missing FILENAME"
+	goto HELP
+)
+IF EXIST %FILENAME% (
+    echo Trying to flash update %FILENAME%, but first erasing and writing system information"
+	%PYTHON% -m esptool --baud 115200 erase_flash
+	%PYTHON% -m esptool --baud 115200 write_flash 0x00 %FILENAME%
+	%PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota.bin
+    for %%f in (littlefs-*.bin) do (
+        %PYTHON% -m esptool --baud 115200 write_flash 0x300000 %%f
+    )
+) else (
+    echo "Invalid file: %FILENAME%"
+	goto HELP
+)
+
+:EOF

bin/device-install.sh

@@ -0,0 +1,59 @@
+#!/bin/sh
+
+PYTHON=${PYTHON:-$(which python3 python|head -n 1)}
+
+set -e
+
+# Usage info
+show_help() {
+cat << EOF
+Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME]
+Flash image file to device, but first erasing and writing system information"
+
+    -h               Display this help and exit
+    -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
+    -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
+    -f FILENAME      The .bin file to flash.  Custom to your device type and region.
+EOF
+}
+
+
+while getopts ":hp:P:f:" opt; do
+    case "${opt}" in
+        h)
+            show_help
+            exit 0
+            ;;
+        p)  export ESPTOOL_PORT=${OPTARG}
+	    ;;
+        P)  PYTHON=${OPTARG}
+            ;;
+        f)  FILENAME=${OPTARG}
+            ;;
+        *)
+ 	    echo "Invalid flag."
+            show_help >&2
+            exit 1
+            ;;
+    esac
+done
+shift "$((OPTIND-1))"
+
+[ -z "$FILENAME" -a -n "$1" ] && {
+    FILENAME=$1
+    shift
+}
+
+if [ -f "${FILENAME}" ]; then
+	echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
+	"$PYTHON" -m esptool  erase_flash
+	"$PYTHON" -m esptool  write_flash 0x00 ${FILENAME}
+    "$PYTHON" -m esptool  write_flash 0x260000 bleota.bin
+	"$PYTHON" -m esptool  write_flash 0x300000 littlefs-*.bin
+
+else
+	echo "Invalid file: ${FILENAME}"
+	show_help
+fi
+
+exit 0

bin/device-update.bat

@@ -0,0 +1,37 @@
+@ECHO OFF
+
+set PYTHON=python
+
+goto GETOPTS
+:HELP
+echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME]
+echo Flash image file to device, leave existing system intact.
+echo.
+echo     -h               Display this help and exit
+echo     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerrous).
+echo     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: %PYTHON%)
+echo     -f FILENAME      The .bin file to flash.  Custom to your device type and region.
+goto EOF
+
+:GETOPTS
+if /I "%1"=="-h" goto HELP
+if /I "%1"=="--help" goto HELP
+if /I "%1"=="-F" set "FILENAME=%2" & SHIFT
+if /I "%1"=="-p" set ESPTOOL_PORT=%2 & SHIFT
+if /I "%1"=="-P" set PYTHON=%2 & SHIFT
+SHIFT
+IF NOT "__%1__"=="____" goto GETOPTS
+
+IF "__%FILENAME%__" == "____" (
+    echo "Missing FILENAME"
+	goto HELP
+)
+IF EXIST %FILENAME% (
+    echo Trying to flash update %FILENAME%
+    %PYTHON% -m esptool --baud 115200 write_flash 0x00 %FILENAME%
+) else (
+    echo "Invalid file: %FILENAME%"
+	goto HELP
+)
+
+:EOF

bin/device-update.sh

@@ -0,0 +1,53 @@
+#!/bin/sh
+
+PYTHON=${PYTHON:-$(which python3 python|head -n 1)}
+
+# Usage info
+show_help() {
+cat << EOF
+Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME]
+Flash image file to device, leave existing system intact."
+
+    -h               Display this help and exit
+    -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerrous).
+    -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
+    -f FILENAME      The .bin file to flash.  Custom to your device type and region.
+EOF
+}
+
+
+while getopts ":hp:P:f:" opt; do
+    case "${opt}" in
+        h)
+            show_help
+            exit 0
+            ;;
+        p)  export ESPTOOL_PORT=${OPTARG}
+	    ;;
+        P)  PYTHON=${OPTARG}
+            ;;
+        f)  FILENAME=${OPTARG}
+            ;;
+        *)
+ 	    echo "Invalid flag."
+            show_help >&2
+            exit 1
+            ;;
+    esac
+done
+shift "$((OPTIND-1))"
+
+[ -z "$FILENAME" -a -n "$1" ] && {
+    FILENAME=$1
+    shift
+}
+
+if [ -f "${FILENAME}" ]; then
+	echo "Trying to flash update ${FILENAME}."
+	$PYTHON -m esptool --baud 115200 write_flash 0x00 ${FILENAME}
+else
+	echo "Invalid file: ${FILENAME}"
+	show_help
+fi
+
+exit 0

bin/dump-ram-users.sh

@@ -0,0 +1,5 @@
+#!/usr/bin/env bash
+
+arm-none-eabi-readelf -s -e .pio/build/nrf52dk/firmware.elf | head -80
+
+nm -CSr --size-sort .pio/build/nrf52dk/firmware.elf  | grep '^200'

bin/exception_decoder.py

@@ -0,0 +1,329 @@
+#!/usr/bin/env python3
+
+"""ESP Exception Decoder
+
+github:  https://github.com/janLo/EspArduinoExceptionDecoder
+license: GPL v3
+author:  Jan Losinski
+
+Meshtastic notes:
+* original version is at: https://github.com/janLo/EspArduinoExceptionDecoder
+* version that's checked into meshtastic repo is based on: https://github.com/me21/EspArduinoExceptionDecoder
+  which adds in ESP32 Backtrace decoding.
+* this also updates the defaults to use ESP32, instead of ESP8266 and defaults to the built firmware.bin
+
+To use, copy the "Backtrace: 0x...." line to a file, e.g., backtrace.txt, then run:
+$ bin/exception_decoder.py backtrace.txt
+"""
+
+import argparse
+import re
+import subprocess
+from collections import namedtuple
+
+import sys
+
+import os
+
+EXCEPTIONS = [
+    "Illegal instruction",
+    "SYSCALL instruction",
+    "InstructionFetchError: Processor internal physical address or data error during instruction fetch",
+    "LoadStoreError: Processor internal physical address or data error during load or store",
+    "Level1Interrupt: Level-1 interrupt as indicated by set level-1 bits in the INTERRUPT register",
+    "Alloca: MOVSP instruction, if caller's registers are not in the register file",
+    "IntegerDivideByZero: QUOS, QUOU, REMS, or REMU divisor operand is zero",
+    "reserved",
+    "Privileged: Attempt to execute a privileged operation when CRING ? 0",
+    "LoadStoreAlignmentCause: Load or store to an unaligned address",
+    "reserved",
+    "reserved",
+    "InstrPIFDataError: PIF data error during instruction fetch",
+    "LoadStorePIFDataError: Synchronous PIF data error during LoadStore access",
+    "InstrPIFAddrError: PIF address error during instruction fetch",
+    "LoadStorePIFAddrError: Synchronous PIF address error during LoadStore access",
+    "InstTLBMiss: Error during Instruction TLB refill",
+    "InstTLBMultiHit: Multiple instruction TLB entries matched",
+    "InstFetchPrivilege: An instruction fetch referenced a virtual address at a ring level less than CRING",
+    "reserved",
+    "InstFetchProhibited: An instruction fetch referenced a page mapped with an attribute that does not permit instruction fetch",
+    "reserved",
+    "reserved",
+    "reserved",
+    "LoadStoreTLBMiss: Error during TLB refill for a load or store",
+    "LoadStoreTLBMultiHit: Multiple TLB entries matched for a load or store",
+    "LoadStorePrivilege: A load or store referenced a virtual address at a ring level less than CRING",
+    "reserved",
+    "LoadProhibited: A load referenced a page mapped with an attribute that does not permit loads",
+    "StoreProhibited: A store referenced a page mapped with an attribute that does not permit stores"
+]
+
+PLATFORMS = {
+    "ESP8266": "lx106",
+    "ESP32": "esp32"
+}
+
+BACKTRACE_REGEX = re.compile(r"(?:\s+(0x40[0-2](?:\d|[a-f]|[A-F]){5}):0x(?:\d|[a-f]|[A-F]){8})\b")
+EXCEPTION_REGEX = re.compile("^Exception \\((?P<exc>[0-9]*)\\):$")
+COUNTER_REGEX = re.compile('^epc1=(?P<epc1>0x[0-9a-f]+) epc2=(?P<epc2>0x[0-9a-f]+) epc3=(?P<epc3>0x[0-9a-f]+) '
+                           'excvaddr=(?P<excvaddr>0x[0-9a-f]+) depc=(?P<depc>0x[0-9a-f]+)$')
+CTX_REGEX = re.compile("^ctx: (?P<ctx>.+)$")
+POINTER_REGEX = re.compile('^sp: (?P<sp>[0-9a-f]+) end: (?P<end>[0-9a-f]+) offset: (?P<offset>[0-9a-f]+)$')
+STACK_BEGIN = '>>>stack>>>'
+STACK_END = '<<<stack<<<'
+STACK_REGEX = re.compile(
+    '^(?P<off>[0-9a-f]+):\W+(?P<c1>[0-9a-f]+) (?P<c2>[0-9a-f]+) (?P<c3>[0-9a-f]+) (?P<c4>[0-9a-f]+)(\W.*)?$')
+
+StackLine = namedtuple("StackLine", ["offset", "content"])
+
+
+class ExceptionDataParser(object):
+    def __init__(self):
+        self.exception = None
+
+        self.epc1 = None
+        self.epc2 = None
+        self.epc3 = None
+        self.excvaddr = None
+        self.depc = None
+
+        self.ctx = None
+
+        self.sp = None
+        self.end = None
+        self.offset = None
+
+        self.stack = []
+
+    def _parse_backtrace(self, line):
+        if line.startswith('Backtrace:'):
+            self.stack = [StackLine(offset=0, content=(addr,)) for addr in BACKTRACE_REGEX.findall(line)]
+            return None
+        return self._parse_backtrace
+
+    def _parse_exception(self, line):
+        match = EXCEPTION_REGEX.match(line)
+        if match is not None:
+            self.exception = int(match.group('exc'))
+            return self._parse_counters
+        return self._parse_exception
+
+    def _parse_counters(self, line):
+        match = COUNTER_REGEX.match(line)
+        if match is not None:
+            self.epc1 = match.group("epc1")
+            self.epc2 = match.group("epc2")
+            self.epc3 = match.group("epc3")
+            self.excvaddr = match.group("excvaddr")
+            self.depc = match.group("depc")
+            return self._parse_ctx
+        return self._parse_counters
+
+    def _parse_ctx(self, line):
+        match = CTX_REGEX.match(line)
+        if match is not None:
+            self.ctx = match.group("ctx")
+            return self._parse_pointers
+        return self._parse_ctx
+
+    def _parse_pointers(self, line):
+        match = POINTER_REGEX.match(line)
+        if match is not None:
+            self.sp = match.group("sp")
+            self.end = match.group("end")
+            self.offset = match.group("offset")
+            return self._parse_stack_begin
+        return self._parse_pointers
+
+    def _parse_stack_begin(self, line):
+        if line == STACK_BEGIN:
+            return self._parse_stack_line
+        return self._parse_stack_begin
+
+    def _parse_stack_line(self, line):
+        if line != STACK_END:
+            match = STACK_REGEX.match(line)
+            if match is not None:
+                self.stack.append(StackLine(offset=match.group("off"),
+                                            content=(match.group("c1"), match.group("c2"), match.group("c3"),
+                                                     match.group("c4"))))
+            return self._parse_stack_line
+        return None
+
+    def parse_file(self, file, platform, stack_only=False):
+        if platform == 'ESP32':
+            func = self._parse_backtrace
+        else:
+            func = self._parse_exception
+            if stack_only:
+                func = self._parse_stack_begin
+
+        for line in file:
+            func = func(line.strip())
+            if func is None:
+                break
+
+        if func is not None:
+            print("ERROR: Parser not complete!")
+            sys.exit(1)
+
+
+class AddressResolver(object):
+    def __init__(self, tool_path, elf_path):
+        self._tool = tool_path
+        self._elf = elf_path
+        self._address_map = {}
+
+    def _lookup(self, addresses):
+        cmd = [self._tool, "-aipfC", "-e", self._elf] + [addr for addr in addresses if addr is not None]
+
+        if sys.version_info[0] < 3:
+            output = subprocess.check_output(cmd)
+        else:
+            output = subprocess.check_output(cmd, encoding="utf-8")
+
+        line_regex = re.compile("^(?P<addr>[0-9a-fx]+): (?P<result>.+)$")
+
+        last = None
+        for line in output.splitlines():
+            line = line.strip()
+            match = line_regex.match(line)
+
+            if match is None:
+                if last is not None and line.startswith('(inlined by)'):
+                    line = line [12:].strip()
+                    self._address_map[last] += ("\n  \-> inlined by: " + line)
+                continue
+
+            if match.group("result") == '?? ??:0':
+                continue
+
+            self._address_map[match.group("addr")] = match.group("result")
+            last = match.group("addr")
+
+    def fill(self, parser):
+        addresses = [parser.epc1, parser.epc2, parser.epc3, parser.excvaddr, parser.sp, parser.end, parser.offset]
+        for line in parser.stack:
+            addresses.extend(line.content)
+
+        self._lookup(addresses)
+
+    def _sanitize_addr(self, addr):
+        if addr.startswith("0x"):
+            addr = addr[2:]
+
+        fill = "0" * (8 - len(addr))
+        return "0x" + fill + addr
+
+    def resolve_addr(self, addr):
+        out = self._sanitize_addr(addr)
+
+        if out in self._address_map:
+            out += ": " + self._address_map[out]
+
+        return out
+
+    def resolve_stack_addr(self, addr, full=True):
+        addr = self._sanitize_addr(addr)
+        if addr in self._address_map:
+            return addr + ": " + self._address_map[addr]
+
+        if full:
+            return "[DATA (0x" + addr + ")]"
+
+        return None
+
+
+def print_addr(name, value, resolver):
+    print("{}:{} {}".format(name, " " * (8 - len(name)), resolver.resolve_addr(value)))
+
+
+def print_stack_full(lines, resolver):
+    print("stack:")
+    for line in lines:
+        print(str(line.offset) + ":")
+        for content in line.content:
+            print("  " + resolver.resolve_stack_addr(content))
+
+
+def print_stack(lines, resolver):
+    print("stack:")
+    for line in lines:
+        for content in line.content:
+            out = resolver.resolve_stack_addr(content, full=False)
+            if out is None:
+                continue
+            print(out)
+
+
+def print_result(parser, resolver, platform, full=True, stack_only=False):
+    if platform == 'ESP8266' and not stack_only:
+        print('Exception: {} ({})'.format(parser.exception, EXCEPTIONS[parser.exception]))
+
+        print("")
+        print_addr("epc1", parser.epc1, resolver)
+        print_addr("epc2", parser.epc2, resolver)
+        print_addr("epc3", parser.epc3, resolver)
+        print_addr("excvaddr", parser.excvaddr, resolver)
+        print_addr("depc", parser.depc, resolver)
+
+        print("")
+        print("ctx: " + parser.ctx)
+
+        print("")
+        print_addr("sp", parser.sp, resolver)
+        print_addr("end", parser.end, resolver)
+        print_addr("offset", parser.offset, resolver)
+
+        print("")
+    if full:
+        print_stack_full(parser.stack, resolver)
+    else:
+        print_stack(parser.stack, resolver)
+
+
+def parse_args():
+    parser = argparse.ArgumentParser(description="decode ESP Stacktraces.")
+
+    parser.add_argument("-p", "--platform", help="The platform to decode from", choices=PLATFORMS.keys(),
+                        default="ESP32")
+    parser.add_argument("-t", "--tool", help="Path to the xtensa toolchain",
+                        default="~/.platformio/packages/toolchain-xtensa32/")
+    parser.add_argument("-e", "--elf", help="path to elf file",
+                        default=".pio/build/esp32/firmware.elf")
+    parser.add_argument("-f", "--full", help="Print full stack dump", action="store_true")
+    parser.add_argument("-s", "--stack_only", help="Decode only a stractrace", action="store_true")
+    parser.add_argument("file", help="The file to read the exception data from ('-' for STDIN)", default="-")
+
+    return parser.parse_args()
+
+
+if __name__ == "__main__":
+    args = parse_args()
+
+    if args.file == "-":
+        file = sys.stdin
+    else:
+        if not os.path.exists(args.file):
+            print("ERROR: file " + args.file + " not found")
+            sys.exit(1)
+        file = open(args.file, "r")
+
+    addr2line = os.path.join(os.path.abspath(os.path.expanduser(args.tool)),
+                             "bin/xtensa-" + PLATFORMS[args.platform] + "-elf-addr2line")
+    if os.name == 'nt':
+        addr2line += '.exe'
+    if not os.path.exists(addr2line):
+        print("ERROR: addr2line not found (" + addr2line + ")")
+
+    elf_file = os.path.abspath(os.path.expanduser(args.elf))
+    if not os.path.exists(elf_file):
+        print("ERROR: elf file not found (" + elf_file + ")")
+
+    parser = ExceptionDataParser()
+    resolver = AddressResolver(addr2line, elf_file)
+
+    parser.parse_file(file, args.platform, args.stack_only)
+    resolver.fill(parser)
+
+    print_result(parser, resolver, args.platform, args.full, args.stack_only)

bin/gen-images.sh

@@ -0,0 +1,19 @@
+#!/usr/bin/env bash
+
+set -e 
+
+# regen the design bins first
+cd design
+bin/generate-pngs.sh
+cd ..
+
+# assumes 50 wide, 28 high
+convert design/logo/png/Mesh_Logo_Black_Small.png -background white -alpha Background src/graphics/img/icon.xbm
+
+inkscape --batch-process -o images/compass.png -w 48 -h 48 images/location_searching-24px.svg
+convert compass.png -background white -alpha Background src/graphics/img/compass.xbm
+
+inkscape --batch-process -o images/face.png -w 13 -h 13 images/face-24px.svg
+
+inkscape --batch-process -o images/pin.png -w 13 -h 13 images/room-24px.svg
+convert pin.png -background white -alpha Background src/graphics/img/pin.xbm

bin/genpartitions.py

@@ -1,4 +1,4 @@
-#!/usr/bin/python2
+#!/usr/bin/env python2
 
 # This is a layout for 4MB of flash
 # Name,   Type, SubType, Offset,  Size, Flags
@@ -38,4 +38,4 @@ app0,     app,  ota_0,   , 0x{app:x},
 app1,     app,  ota_1,   , 0x{app:x},
 spiffs,   data, spiffs,  , 0x{spi:x} """.format(**locals())
 
-print(table)
+print(table)

bin/lora32-openocd.cfg

@@ -1,61 +0,0 @@
-# Example OpenOCD configuration file for ESP-WROOM-32 module.
-# By default, the following configuration is used:
-# - dual core debugging
-# - support for listing FreeRTOS tasks is enabled
-# - OpenOCD is configured to set SPI flash voltage at 3.3V
-#   by keeping MTDI bootstrapping pin low
-#
-# Use variables listed below to customize this.
-# Variables can be modified in this file or set on the command line.
-#
-# For example, OpenOCD can be started for single core ESP32 debugging on
-# ESP-WROVER-KIT with ESP-WROOM-32 module as follows:
-#
-#   openocd -f interface/ftdi/esp32_devkitj_v1.cfg -c 'set ESP32_ONLYCPU 1' -f board/esp-wroom-32.cfg
-#
-# If a different JTAG interface is used, change the first -f option.
-#
-# If OpenOCD is built from source, pass an additional -s option to specify
-# the location of 'tcl' directory:
-#
-#    src/openocd -s tcl <rest of the command line>
-#
-# Note:
-#   For ESP32-WROVER module use 'esp32-wrover.cfg' configuration file
-#   ESP-WROOM-32 and ESP32-WROVER have different flash voltage setting
-
-
-# The ESP32 only supports JTAG.
-transport select jtag
-
-# The speed of the JTAG interface, in KHz. If you get DSR/DIR errors (and they
-# do not relate to OpenOCD trying to read from a memory range without physical
-# memory being present there), you can try lowering this.
-#
-# On DevKit-J, this can go as high as 20MHz if CPU frequency is 80MHz, or 26MHz
-# if CPU frequency is 160MHz or 240MHz.
-adapter_khz 20000
-
-# If single core debugging is required, uncomment the following line
-# set ESP32_ONLYCPU 1
-
-# To disable RTOS support, uncomment the following line
-# set ESP32_RTOS none
-
-# Tell OpenOCD which SPI flash voltage is used by the board (3.3 or 1.8)
-# The TDI pin of ESP32 is also a bootstrap pin that selects the voltage the SPI flash
-# chip runs at. When a hard reset happens (e.g. because someone switches the board off
-# and on) the ESP32 will use the current TDI value as the bootstrap value because the
-# JTAG adapter overrides the pull-up or pull-down resistor that is supposed to do the
-# bootstrapping. These lines basically set the idle value of the TDI line to a
-# specified value, therefore reducing the chance of a bad bootup due to a bad flash
-# voltage greatly.
-# This option defaults to 3.3, if not set. To override the default, uncomment
-# the following line:
-# set ESP32_FLASH_VOLTAGE 1.8
-
-# Set semihosting I/O base dir
-# set ESP_SEMIHOST_BASEDIR ""
-
-# Source the ESP32 configuration file
-source [find target/esp32.cfg]

bin/native-gdbserver.sh

@@ -0,0 +1,5 @@
+#!/usr/bin/env bash
+
+set -e
+pio run --environment native
+gdbserver --once localhost:2345 .pio/build/native/program "$@"

bin/native-run.sh

@@ -0,0 +1,5 @@
+#!/usr/bin/env bash
+
+set -e
+pio run --environment native
+.pio/build/native/program "$@"

bin/platformio-custom.py

@@ -0,0 +1,73 @@
+import subprocess
+import configparser
+import traceback
+import sys
+from os.path import join
+from readprops import readProps
+
+Import("env")
+platform = env.PioPlatform()
+
+def esp32_create_combined_bin(source, target, env):
+    # this sub is borrowed from ESPEasy build toolchain. It's licensed under GPL V3
+    # https://github.com/letscontrolit/ESPEasy/blob/mega/tools/pio/post_esp32.py
+    print("Generating combined binary for serial flashing")
+
+    app_offset = 0x10000
+
+    new_file_name = env.subst("$BUILD_DIR/${PROGNAME}.factory.bin")
+    sections = env.subst(env.get("FLASH_EXTRA_IMAGES"))
+    firmware_name = env.subst("$BUILD_DIR/${PROGNAME}.bin")
+    chip = env.get("BOARD_MCU")
+    flash_size = env.BoardConfig().get("upload.flash_size")
+    flash_freq = env.BoardConfig().get("build.f_flash", '40m')
+    flash_freq = flash_freq.replace('000000L', 'm')
+    flash_mode = env.BoardConfig().get("build.flash_mode", "dio")
+    memory_type = env.BoardConfig().get("build.arduino.memory_type", "qio_qspi")
+    if flash_mode == "qio" or flash_mode == "qout":
+        flash_mode = "dio"
+    if memory_type == "opi_opi" or memory_type == "opi_qspi":
+        flash_mode = "dout"
+    cmd = [
+        "--chip",
+        chip,
+        "merge_bin",
+        "-o",
+        new_file_name,
+        "--flash_mode",
+        flash_mode,
+        "--flash_freq",
+        flash_freq,
+        "--flash_size",
+        flash_size,
+    ]
+
+    print("    Offset | File")
+    for section in sections:
+        sect_adr, sect_file = section.split(" ", 1)
+        print(f" -  {sect_adr} | {sect_file}")
+        cmd += [sect_adr, sect_file]
+
+    print(f" - {hex(app_offset)} | {firmware_name}")
+    cmd += [hex(app_offset), firmware_name]
+
+    print('Using esptool.py arguments: %s' % ' '.join(cmd))
+
+    esptool.main(cmd)
+
+if (platform.name == "espressif32"):
+    sys.path.append(join(platform.get_package_dir("tool-esptoolpy")))
+    import esptool
+    env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", esp32_create_combined_bin)    
+
+Import("projenv")
+
+prefsLoc = projenv["PROJECT_DIR"] + "/version.properties"
+verObj = readProps(prefsLoc)
+print("Using meshtastic platformio-custom.py, firmware version " + verObj['long'])
+
+# General options that are passed to the C and C++ compilers
+projenv.Append(CCFLAGS=[
+    "-DAPP_VERSION=" + verObj['long'],
+    "-DAPP_VERSION_SHORT=" + verObj['short']    
+])

bin/program-release-heltec.sh

@@ -1,6 +0,0 @@
-
-set -e
-
-source bin/version.sh
-
-esptool.py --baud 921600 write_flash 0x10000 release/latest/firmware-HELTEC-US-$VERSION.bin

bin/promote-release.sh

@@ -0,0 +1,14 @@
+#!/usr/bin/env bash
+
+set -e 
+
+echo "This script is only for developers who are publishing new builds on github.  Most users don't need it"
+
+VERSION=`bin/buildinfo.py long`
+
+# Must have a V prefix to trigger github
+git tag "v${VERSION}"
+
+git push origin "v${VERSION}" # push the tag
+
+echo "Tag ${VERSION} pushed to github, github actions should now be building the draft release.  If it seems good, click to publish it"

bin/read-system-info.sh

@@ -0,0 +1,3 @@
+#!/usr/bin/env bash
+
+esptool.py --baud 115200 read_flash 0x1000 0xf000 system-info.img

bin/readprops.py

@@ -0,0 +1,37 @@
+
+
+import subprocess
+import configparser
+import traceback
+import sys
+
+
+def readProps(prefsLoc):
+    """Read the version of our project as a string"""
+
+    config = configparser.RawConfigParser()
+    config.read(prefsLoc)
+    version = dict(config.items('VERSION'))
+    verObj = dict(short = "{}.{}.{}".format(version["major"], version["minor"], version["build"]),
+        long = "unset")
+
+    # Try to find current build SHA if if the workspace is clean.  This could fail if git is not installed
+    try:
+        sha = subprocess.check_output(
+            ['git', 'rev-parse', '--short', 'HEAD']).decode("utf-8").strip()
+        isDirty = subprocess.check_output(
+            ['git', 'diff', 'HEAD']).decode("utf-8").strip()
+        suffix = sha
+        if isDirty:
+            # short for 'dirty', we want to keep our verstrings source for protobuf reasons
+            suffix = sha + "-d"
+        verObj['long'] = "{}.{}.{}.{}".format(
+            version["major"], version["minor"], version["build"], suffix)
+    except:
+        # print("Unexpected error:", sys.exc_info()[0])
+        # traceback.print_exc()
+        verObj['long'] = verObj['short']
+
+    # print("firmware version " + verStr)
+    return verObj
+# print("path is" + ','.join(sys.path))

bin/regen-protos.bat

@@ -0,0 +1 @@
+cd protobufs && ..\nanopb-0.4.6\generator-bin\protoc.exe --nanopb_out=-v:..\src\mesh\generated -I=..\protobufs *.proto

bin/regen-protos.sh

@@ -1,6 +1,15 @@
-#!/bin/bash
+#!/usr/bin/env bash
+
+set -e
+
+echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.6 to be located in the"
+echo "firmware root directory if the following step fails, you should download the correct"
+echo "prebuilt binaries for your computer into nanopb-0.4.6"
 
-echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.1"
 # the nanopb tool seems to require that the .options file be in the current directory!
-cd proto
-../../nanopb-0.4.1-linux-x86/generator-bin/protoc --nanopb_out=-v:../src -I=../proto mesh.proto
+cd protobufs
+../nanopb-0.4.6/generator-bin/protoc --nanopb_out=-v:../src/mesh/generated -I=../protobufs *.proto
+
+#echo "Regenerating protobuf documentation - if you see an error message"
+#echo "you can ignore it unless doing a new protobuf release to github."
+#bin/regen-docs.sh

bin/run-0-monitor.sh

@@ -1 +0,0 @@
-pio run --upload-port /dev/ttyUSB0 -t upload -t monitor

bin/run-both-monitor.sh

@@ -1,7 +0,0 @@
-set -e 
-
-echo uploading to usb1
-pio run --upload-port /dev/ttyUSB1 -t upload
-
-echo uploading to usb0
-pio run --upload-port /dev/ttyUSB0 -t upload -t monitor

bin/run-openocd.sh

@@ -1,5 +0,0 @@
-
-
-# /home/kevinh/.platformio/packages/tool-openocd-esp32/bin/openocd -s /home/kevinh/.platformio/packages/tool-openocd-esp32 -c gdb_port pipe; tcl_port disabled; telnet_port disabled -s /home/kevinh/.platformio/packages/tool-openocd-esp32/share/openocd/scripts -f interface/jlink.cfg -f board/esp-wroom-32.cfg
-/home/kevinh/.platformio/packages/tool-openocd-esp32/bin/openocd -s /home/kevinh/.platformio/packages/tool-openocd-esp32 -s /home/kevinh/.platformio/packages/tool-openocd-esp32/share/openocd/scripts -f interface/jlink.cfg -f ./lora32-openocd.cfg
-

bin/start-terminal.sh

@@ -1 +0,0 @@
-pio device monitor -b 115200

bin/test-simulator.sh

@@ -0,0 +1,11 @@
+#!/usr/bin/env bash
+
+set -e
+
+echo "Starting simulator"
+.pio/build/native/program &
+sleep 20 # 5 seconds was not enough
+
+echo "Simulator started, launching python test..."
+python3 -c 'from meshtastic.test import testSimulator; testSimulator()'
+

bin/uf2-convert.bat

@@ -0,0 +1,2 @@
+@echo off
+if [%1]==[] (echo "Please specify a platformio NRF target (i.e. rak4631) as the first argument.") else (python3 .\bin\uf2conv.py .\.pio\build\%1\firmware.hex -c -o .\.pio\build\%1\firmware.uf2 -f 0xADA52840)

bin/uf2conv.py

@@ -0,0 +1,314 @@
+#!/usr/bin/env python3
+import sys
+import struct
+import subprocess
+import re
+import os
+import os.path
+import argparse
+
+
+UF2_MAGIC_START0 = 0x0A324655 # "UF2\n"
+UF2_MAGIC_START1 = 0x9E5D5157 # Randomly selected
+UF2_MAGIC_END    = 0x0AB16F30 # Ditto
+
+families = {
+    'SAMD21': 0x68ed2b88,
+    'SAML21': 0x1851780a,
+    'SAMD51': 0x55114460,
+    'NRF52': 0x1b57745f,
+    'STM32F0': 0x647824b6,
+    'STM32F1': 0x5ee21072,
+    'STM32F2': 0x5d1a0a2e,
+    'STM32F3': 0x6b846188,
+    'STM32F4': 0x57755a57,
+    'STM32F7': 0x53b80f00,
+    'STM32G0': 0x300f5633,
+    'STM32G4': 0x4c71240a,
+    'STM32H7': 0x6db66082,
+    'STM32L0': 0x202e3a91,
+    'STM32L1': 0x1e1f432d,
+    'STM32L4': 0x00ff6919,
+    'STM32L5': 0x04240bdf,
+    'STM32WB': 0x70d16653,
+    'STM32WL': 0x21460ff0,
+    'ATMEGA32': 0x16573617,
+    'MIMXRT10XX': 0x4FB2D5BD
+}
+
+INFO_FILE = "/INFO_UF2.TXT"
+
+appstartaddr = 0x2000
+familyid = 0x0
+
+
+def is_uf2(buf):
+    w = struct.unpack("<II", buf[0:8])
+    return w[0] == UF2_MAGIC_START0 and w[1] == UF2_MAGIC_START1
+
+def is_hex(buf):
+    try:
+        w = buf[0:30].decode("utf-8")
+    except UnicodeDecodeError:
+        return False
+    if w[0] == ':' and re.match(b"^[:0-9a-fA-F\r\n]+$", buf):
+        return True
+    return False
+
+def convert_from_uf2(buf):
+    global appstartaddr
+    numblocks = len(buf) // 512
+    curraddr = None
+    outp = b""
+    for blockno in range(numblocks):
+        ptr = blockno * 512
+        block = buf[ptr:ptr + 512]
+        hd = struct.unpack(b"<IIIIIIII", block[0:32])
+        if hd[0] != UF2_MAGIC_START0 or hd[1] != UF2_MAGIC_START1:
+            print("Skipping block at " + ptr + "; bad magic")
+            continue
+        if hd[2] & 1:
+            # NO-flash flag set; skip block
+            continue
+        datalen = hd[4]
+        if datalen > 476:
+            assert False, "Invalid UF2 data size at " + ptr
+        newaddr = hd[3]
+        if curraddr == None:
+            appstartaddr = newaddr
+            curraddr = newaddr
+        padding = newaddr - curraddr
+        if padding < 0:
+            assert False, "Block out of order at " + ptr
+        if padding > 10*1024*1024:
+            assert False, "More than 10M of padding needed at " + ptr
+        if padding % 4 != 0:
+            assert False, "Non-word padding size at " + ptr
+        while padding > 0:
+            padding -= 4
+            outp += b"\x00\x00\x00\x00"
+        outp += block[32 : 32 + datalen]
+        curraddr = newaddr + datalen
+    return outp
+
+def convert_to_carray(file_content):
+    outp = "const unsigned char bindata[] __attribute__((aligned(16))) = {"
+    for i in range(len(file_content)):
+        if i % 16 == 0:
+            outp += "\n"
+        outp += "0x%02x, " % ord(file_content[i])
+    outp += "\n};\n"
+    return outp
+
+def convert_to_uf2(file_content):
+    global familyid
+    datapadding = b""
+    while len(datapadding) < 512 - 256 - 32 - 4:
+        datapadding += b"\x00\x00\x00\x00"
+    numblocks = (len(file_content) + 255) // 256
+    outp = b""
+    for blockno in range(numblocks):
+        ptr = 256 * blockno
+        chunk = file_content[ptr:ptr + 256]
+        flags = 0x0
+        if familyid:
+            flags |= 0x2000
+        hd = struct.pack(b"<IIIIIIII",
+            UF2_MAGIC_START0, UF2_MAGIC_START1,
+            flags, ptr + appstartaddr, 256, blockno, numblocks, familyid)
+        while len(chunk) < 256:
+            chunk += b"\x00"
+        block = hd + chunk + datapadding + struct.pack(b"<I", UF2_MAGIC_END)
+        assert len(block) == 512
+        outp += block
+    return outp
+
+class Block:
+    def __init__(self, addr):
+        self.addr = addr
+        self.bytes = bytearray(256)
+
+    def encode(self, blockno, numblocks):
+        global familyid
+        flags = 0x0
+        if familyid:
+            flags |= 0x2000
+        hd = struct.pack("<IIIIIIII",
+            UF2_MAGIC_START0, UF2_MAGIC_START1,
+            flags, self.addr, 256, blockno, numblocks, familyid)
+        hd += self.bytes[0:256]
+        while len(hd) < 512 - 4:
+            hd += b"\x00"
+        hd += struct.pack("<I", UF2_MAGIC_END)
+        return hd
+
+def convert_from_hex_to_uf2(buf):
+    global appstartaddr
+    appstartaddr = None
+    upper = 0
+    currblock = None
+    blocks = []
+    for line in buf.split('\n'):
+        if line[0] != ":":
+            continue
+        i = 1
+        rec = []
+        while i < len(line) - 1:
+            rec.append(int(line[i:i+2], 16))
+            i += 2
+        tp = rec[3]
+        if tp == 4:
+            upper = ((rec[4] << 8) | rec[5]) << 16
+        elif tp == 2:
+            upper = ((rec[4] << 8) | rec[5]) << 4
+            assert (upper & 0xffff) == 0
+        elif tp == 1:
+            break
+        elif tp == 0:
+            addr = upper | (rec[1] << 8) | rec[2]
+            if appstartaddr == None:
+                appstartaddr = addr
+            i = 4
+            while i < len(rec) - 1:
+                if not currblock or currblock.addr & ~0xff != addr & ~0xff:
+                    currblock = Block(addr & ~0xff)
+                    blocks.append(currblock)
+                currblock.bytes[addr & 0xff] = rec[i]
+                addr += 1
+                i += 1
+    numblocks = len(blocks)
+    resfile = b""
+    for i in range(0, numblocks):
+        resfile += blocks[i].encode(i, numblocks)
+    return resfile
+
+def to_str(b):
+    return b.decode("utf-8")
+
+def get_drives():
+    drives = []
+    if sys.platform == "win32":
+        r = subprocess.check_output(["wmic", "PATH", "Win32_LogicalDisk",
+                                     "get", "DeviceID,", "VolumeName,",
+                                     "FileSystem,", "DriveType"])
+        for line in to_str(r).split('\n'):
+            words = re.split('\s+', line)
+            if len(words) >= 3 and words[1] == "2" and words[2] == "FAT":
+                drives.append(words[0])
+    else:
+        rootpath = "/media"
+        if sys.platform == "darwin":
+            rootpath = "/Volumes"
+        elif sys.platform == "linux":
+            tmp = rootpath + "/" + os.environ["USER"]
+            if os.path.isdir(tmp):
+                rootpath = tmp
+        for d in os.listdir(rootpath):
+            drives.append(os.path.join(rootpath, d))
+
+
+    def has_info(d):
+        try:
+            return os.path.isfile(d + INFO_FILE)
+        except:
+            return False
+
+    return list(filter(has_info, drives))
+
+
+def board_id(path):
+    with open(path + INFO_FILE, mode='r') as file:
+        file_content = file.read()
+    return re.search("Board-ID: ([^\r\n]*)", file_content).group(1)
+
+
+def list_drives():
+    for d in get_drives():
+        print(d, board_id(d))
+
+
+def write_file(name, buf):
+    with open(name, "wb") as f:
+        f.write(buf)
+    print("Wrote %d bytes to %s" % (len(buf), name))
+
+
+def main():
+    global appstartaddr, familyid
+    def error(msg):
+        print(msg)
+        sys.exit(1)
+    parser = argparse.ArgumentParser(description='Convert to UF2 or flash directly.')
+    parser.add_argument('input', metavar='INPUT', type=str, nargs='?',
+                        help='input file (HEX, BIN or UF2)')
+    parser.add_argument('-b' , '--base', dest='base', type=str,
+                        default="0x2000",
+                        help='set base address of application for BIN format (default: 0x2000)')
+    parser.add_argument('-o' , '--output', metavar="FILE", dest='output', type=str,
+                        help='write output to named file; defaults to "flash.uf2" or "flash.bin" where sensible')
+    parser.add_argument('-d' , '--device', dest="device_path",
+                        help='select a device path to flash')
+    parser.add_argument('-l' , '--list', action='store_true',
+                        help='list connected devices')
+    parser.add_argument('-c' , '--convert', action='store_true',
+                        help='do not flash, just convert')
+    parser.add_argument('-D' , '--deploy', action='store_true',
+                        help='just flash, do not convert')
+    parser.add_argument('-f' , '--family', dest='family', type=str,
+                        default="0x0",
+                        help='specify familyID - number or name (default: 0x0)')
+    parser.add_argument('-C' , '--carray', action='store_true',
+                        help='convert binary file to a C array, not UF2')
+    args = parser.parse_args()
+    appstartaddr = int(args.base, 0)
+
+    if args.family.upper() in families:
+        familyid = families[args.family.upper()]
+    else:
+        try:
+            familyid = int(args.family, 0)
+        except ValueError:
+            error("Family ID needs to be a number or one of: " + ", ".join(families.keys()))
+
+    if args.list:
+        list_drives()
+    else:
+        if not args.input:
+            error("Need input file")
+        with open(args.input, mode='rb') as f:
+            inpbuf = f.read()
+        from_uf2 = is_uf2(inpbuf)
+        ext = "uf2"
+        if args.deploy:
+            outbuf = inpbuf
+        elif from_uf2:
+            outbuf = convert_from_uf2(inpbuf)
+            ext = "bin"
+        elif is_hex(inpbuf):
+            outbuf = convert_from_hex_to_uf2(inpbuf.decode("utf-8"))
+        elif args.carray:
+            outbuf = convert_to_carray(inpbuf)
+            ext = "h"
+        else:
+            outbuf = convert_to_uf2(inpbuf)
+        print("Converting to %s, output size: %d, start address: 0x%x" %
+              (ext, len(outbuf), appstartaddr))
+        if args.convert or ext != "uf2":
+            drives = []
+            if args.output == None:
+                args.output = "flash." + ext
+        else:
+            drives = get_drives()
+
+        if args.output:
+            write_file(args.output, outbuf)
+        else:
+            if len(drives) == 0:
+                error("No drive to deploy.")
+        for d in drives:
+            print("Flashing %s (%s)" % (d, board_id(d)))
+            write_file(d + "/NEW.UF2", outbuf)
+
+
+if __name__ == "__main__":
+    main()

bin/upload-usb1.sh

@@ -1 +0,0 @@
-pio run --upload-port /dev/ttyUSB1 -t upload

bin/version.sh

@@ -1,3 +0,0 @@
-
-
-export VERSION=0.1.3

bin/view-map.sh

@@ -0,0 +1,4 @@
+#!/usr/bin/env bash
+
+echo using amap tool to display memory map
+amap .pio/build/output.map

boards/eink0.1.json

@@ -0,0 +1,61 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_TTGO_EINK -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      [
+        "0x239A",
+        "0x4405"
+      ]
+    ],
+    "usb_product": "TTGO_eink",
+    "mcu": "nrf52840",
+    "variant": "eink0.1",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": [
+    "bluetooth"
+  ],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": [
+      "jlink"
+    ],
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": [
+    "arduino"
+  ],
+  "name": "TTGO eink (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "jlink",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "stlink"
+    ]
+  },
+  "url": "FIXME",
+  "vendor": "TTGO"
+}

boards/generic_wl5e.json

@@ -0,0 +1,31 @@
+{
+  "build": {
+    "core": "stm32",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DSTM32WLxx -DSTM32WLE5xx -DARDUINO_GENERIC_WLE5CCUX",
+    "f_cpu": "48000000L",
+    "mcu": "stm32wle5ccu",
+    "variant": "STM32WLxx/WL54CCU_WL55CCU_WLE4C(8-B-C)U_WLE5C(8-B-C)U",
+    "product_line": "STM32WLE5xx"
+  },
+  "debug": {
+    "default_tools": [
+      "stlink"
+    ],
+    "jlink_device": "STM32WLE5CC",
+    "openocd_target": "stm32wlx",
+    "svd_path": "STM32WLE5_CM4.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "BB-STM32WL",
+  "upload": {
+    "maximum_ram_size": 65536,
+    "maximum_size": 262144,
+    "protocol": "cmsis-dap",
+    "protocols": [
+      "cmsis-dap"
+    ]
+  },
+  "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32wl-series.html",
+  "vendor": "ST"
+}

boards/lora-relay-v1.json

@@ -0,0 +1,46 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_LORA_RELAY_V1 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x239A", "0x4404"]],
+    "usb_product": "LORA_RELAY",
+    "mcu": "nrf52840",
+    "variant": "lora_relay_v1",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "Meshtastic Lora Relay V1 (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "jlink",
+    "protocols": ["jlink", "nrfjprog", "stlink"]
+  },
+  "url": "https://github.com/BigCorvus/SX1262-LoRa-BLE-Relay",
+  "vendor": "BigCorvus"
+}

boards/lora-relay-v2.json

@@ -0,0 +1,46 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_LORA_RELAY_V2 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x239A", "0x4406"]],
+    "usb_product": "LORA_RELAY",
+    "mcu": "nrf52840",
+    "variant": "lora_relay_v2",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "Meshtastic Lora Relay V1 (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "jlink",
+    "protocols": ["jlink", "nrfjprog", "stlink"]
+  },
+  "url": "https://github.com/BigCorvus/SX1262-LoRa-BLE-Relay",
+  "vendor": "BigCorvus"
+}

boards/lora_isp4520.json

@@ -0,0 +1,48 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52832_s132_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DNRF52832_XXAA -DNRF52",
+    "f_cpu": "64000000L",
+    "mcu": "nrf52832",
+    "variant": "lora_isp4520",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS132",
+      "sd_name": "s132",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B7"
+    }
+  },
+  "connectivity": [
+    "bluetooth"
+  ],
+  "debug": {
+    "jlink_device": "nRF52832_xxAA",
+    "svd_path": "nrf52.svd"
+  },
+  "frameworks": [
+    "arduino"
+  ],
+  "name": "lora ISP4520",
+  "upload": {
+    "maximum_ram_size": 65536,
+    "maximum_size": 524288,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink"
+    ]
+  },
+  "url": "",
+  "vendor": "PsiSoft"
+}

boards/nordic_pca10059.json

@@ -0,0 +1,72 @@
+{
+    "build": {
+        "arduino": {
+            "ldscript": "nrf52840_s140_v6.ld"
+        },
+        "core": "nRF5",
+        "cpu": "cortex-m4",
+        "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+        "f_cpu": "64000000L",
+        "hwids": [
+            [
+                "0x239A",
+                "0x8029"
+            ],
+            [
+                "0x239A",
+                "0x0029"
+            ],
+            [
+                "0x239A",
+                "0x002A"
+            ],
+            [
+                "0x239A",
+                "0x802A"
+            ]
+        ],
+        "usb_product": "PCA10059",
+        "mcu": "nrf52840",
+        "variant": "nRF52840 Dongle",
+        "bsp": {
+            "name": "adafruit"
+        },
+        "softdevice": {
+            "sd_flags": "-DS140",
+            "sd_name": "s140",
+            "sd_version": "6.1.1",
+            "sd_fwid": "0x00B6"
+        },
+        "bootloader": {
+            "settings_addr": "0xFF000"
+        }
+    },
+    "connectivity": [
+        "bluetooth"
+    ],
+    "debug": {
+        "jlink_device": "nRF52840_xxAA",
+        "svd_path": "nrf52840.svd"
+    },
+    "frameworks": [
+        "arduino"
+    ],
+    "name": "nRF52840 Dongle",
+    "upload": {
+        "maximum_ram_size": 248832,
+        "maximum_size": 815104,
+        "speed": 115200,
+        "protocol": "nrfutil",
+        "protocols": [
+            "jlink",
+            "nrfjprog",
+            "nrfutil",
+            "stlink"
+        ],
+        "use_1200bps_touch": true,
+        "require_upload_port": true,
+        "wait_for_upload_port": true
+    },
+    "url": "https://www.nordicsemi.com/Products/Development-hardware/nrf52840-dongle",
+    "vendor": "Nordic Semiconductor"
+}

boards/nrf52840_dk.json

@@ -0,0 +1,47 @@
+{
+    "build": {
+      "arduino": {
+        "ldscript": "nrf52840_s140_v6.ld"
+      },
+      "core": "nRF5",
+      "cpu": "cortex-m4",
+      "extra_flags": "-DARDUINO_NRF52840_PCA10056 -DNRF52840_XXAA",
+      "f_cpu": "64000000L",
+      "hwids": [["0x239A", "0x4404"]],
+      "usb_product": "nrf52840dk",
+      "mcu": "nrf52840",
+      "variant": "pca10056",
+      "variants_dir": "variants",
+      "bsp": {
+        "name": "adafruit"
+      },
+      "softdevice": {
+        "sd_flags": "-DS140",
+        "sd_name": "s140",
+        "sd_version": "6.1.1",
+        "sd_fwid": "0x00B6"
+      },
+      "bootloader": {
+        "settings_addr": "0xFF000"
+      }
+    },
+    "connectivity": ["bluetooth"],
+    "debug": {
+      "jlink_device": "nRF52840_xxAA",
+      "onboard_tools": ["jlink"],
+      "svd_path": "nrf52840.svd"
+    },
+    "frameworks": ["arduino"],
+    "name": "A modified NRF52840-DK devboard (Adafruit BSP)",
+    "upload": {
+      "maximum_ram_size": 248832,
+      "maximum_size": 815104,
+      "require_upload_port": true,
+      "speed": 115200,
+      "protocol": "jlink",
+      "protocols": ["jlink", "nrfjprog", "stlink"]
+    },
+    "url": "https://meshtastic.org/",
+    "vendor": "Nordic Semi"
+  }
+  

boards/nrf52840_dk_modified.json

@@ -0,0 +1,46 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s113_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_PCA10056 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x239A", "0x4404"]],
+    "usb_product": "nrf52840dk",
+    "mcu": "nrf52840",
+    "variant": "pca10056-rc-clock",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "A modified NRF52840-DK devboard (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "jlink",
+    "protocols": ["jlink", "nrfjprog", "stlink"]
+  },
+  "url": "https://meshtastic.org/",
+  "vendor": "Nordic Semi"
+}

boards/ppr.json

@@ -0,0 +1,46 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_PPR -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x239A", "0x4403"]],
+    "usb_product": "PPR",
+    "mcu": "nrf52840",
+    "variant": "ppr",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "Meshtastic PPR (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "jlink",
+    "protocols": ["jlink", "nrfjprog", "stlink"]
+  },
+  "url": "https://meshtastic.org/",
+  "vendor": "Othernet"
+}

boards/ppr1.json

@@ -0,0 +1,46 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52833_s113_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52833_PPR -DNRF52833_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x239A", "0x4406"]],
+    "usb_product": "PPR",
+    "mcu": "nrf52833",
+    "variant": "ppr",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS113",
+      "sd_name": "s113",
+      "sd_version": "7.2.0",
+      "sd_fwid": "0x00b6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52833_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52833.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "Meshtastic PPR1 (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "jlink",
+    "protocols": ["jlink", "nrfjprog", "stlink"]
+  },
+  "url": "https://meshtastic.org/",
+  "vendor": "Othernet"
+}

boards/t-echo.json

@@ -0,0 +1,64 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_TTGO_EINK -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      [
+        "0x239A",
+        "0x4405"
+      ]
+    ],
+    "usb_product": "TTGO_eink",
+    "mcu": "nrf52840",
+    "variant": "t-echo",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": [
+    "bluetooth"
+  ],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": [
+      "jlink"
+    ],
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": [
+    "arduino"
+  ],
+  "name": "TTGO eink (Adafruit BSP)",
+    "upload": {
+      "maximum_ram_size": 248832,
+      "maximum_size": 815104,
+      "speed": 115200,
+      "protocol": "nrfutil",
+      "protocols": [
+          "jlink",
+          "nrfjprog",
+          "nrfutil",
+          "stlink"
+      ],
+      "use_1200bps_touch": true,
+      "require_upload_port": true,
+      "wait_for_upload_port": true
+  },
+  "url": "FIXME",
+  "vendor": "TTGO"
+}

boards/tbeam-s3-core.json

@@ -0,0 +1,48 @@
+{
+  "build": {
+    "arduino":{
+      "ldscript": "esp32s3_out.ld"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DLILYGO_TBEAM_S3_CORE",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_DFU_ON_BOOT=1",
+      "-DARDUINO_USB_MSC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "dio",
+    "hwids": [
+      [
+        "0X303A",
+        "0x1001"
+      ]
+    ],
+    "mcu": "esp32s3",
+    "variant": "tbeam-s3-core"
+  },
+  "connectivity": [
+    "wifi"
+  ],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": [
+    "arduino"
+  ],
+  "name": "LilyGo TBeam-S3-Core",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "http://www.lilygo.cn/",
+  "vendor": "LilyGo"
+}

boards/wiscore_rak11200.json

@@ -0,0 +1,39 @@
+{
+  "build": {
+    "arduino":{
+      "ldscript": "esp32_out.ld"
+    },
+    "core": "esp32",
+    "extra_flags": "-DARDUINO_ESP32_DEV",
+    "f_cpu": "240000000L",
+    "f_flash": "40000000L",
+    "flash_mode": "dio",
+    "mcu": "esp32",
+    "variant": "WisCore_RAK11200_Board"
+  },
+  "connectivity": [
+    "wifi",
+    "bluetooth",
+    "ethernet",
+    "can"
+  ],
+  "frameworks": [
+    "arduino",
+    "espidf"
+  ],
+  "name": "WisCore RAK11200 Board",
+  "upload": {
+    "flash_size": "4MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 4194304,
+    "protocols": [
+      "esptool",
+      "espota",
+      "ftdi"
+    ],
+    "require_upload_port": true,
+    "speed": 460800
+  },
+  "url": "https://www.rakwireless.com",
+  "vendor": "RAKwireless"
+}

boards/wiscore_rak4600.json

@@ -0,0 +1,71 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52832_s132_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DNRF52832_XXAA -DNRF52",
+    "f_cpu": "64000000L",
+    "hwids": [
+      [
+        "0x239A",
+        "0x8029"
+      ],
+      [
+        "0x239A",
+        "0x0029"
+      ],
+      [
+        "0x239A",
+        "0x002A"
+      ],
+      [
+        "0x239A",
+        "0x802A"
+      ]
+    ],
+    "usb_product": "Feather nRF52832 Express",
+    "mcu": "nrf52832",
+    "variant": "WisCore_RAK4600_Board",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS132",
+      "sd_name": "s132",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B7"
+    },
+    "zephyr": {
+      "variant": "nrf52_adafruit_feather"
+    }
+  },
+  "connectivity": [
+    "bluetooth"
+  ],
+  "debug": {
+    "jlink_device": "nRF52832_xxAA",
+    "svd_path": "nrf52.svd"
+  },
+  "frameworks": [
+    "arduino",
+    "zephyr"
+  ],
+  "name": "Adafruit Bluefruit nRF52832 Feather",
+  "upload": {
+    "maximum_ram_size": 65536,
+    "maximum_size": 524288,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink"
+    ]
+  },
+  "url": "https://www.adafruit.com/product/3406",
+  "vendor": "Adafruit"
+}

boards/wiscore_rak4631.json

@@ -0,0 +1,72 @@
+{
+    "build": {
+        "arduino": {
+            "ldscript": "nrf52840_s140_v6.ld"
+        },
+        "core": "nRF5",
+        "cpu": "cortex-m4",
+        "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+        "f_cpu": "64000000L",
+        "hwids": [
+            [
+                "0x239A",
+                "0x8029"
+            ],
+            [
+                "0x239A",
+                "0x0029"
+            ],
+            [
+                "0x239A",
+                "0x002A"
+            ],
+            [
+                "0x239A",
+                "0x802A"
+            ]
+        ],
+        "usb_product": "WisCore RAK4631 Board",
+        "mcu": "nrf52840",
+        "variant": "WisCore_RAK4631_Board",
+        "bsp": {
+            "name": "adafruit"
+        },
+        "softdevice": {
+            "sd_flags": "-DS140",
+            "sd_name": "s140",
+            "sd_version": "6.1.1",
+            "sd_fwid": "0x00B6"
+        },
+        "bootloader": {
+            "settings_addr": "0xFF000"
+        }
+    },
+    "connectivity": [
+        "bluetooth"
+    ],
+    "debug": {
+        "jlink_device": "nRF52840_xxAA",
+        "svd_path": "nrf52840.svd"
+    },
+    "frameworks": [
+        "arduino"
+    ],
+    "name": "WisCore RAK4631 Board",
+    "upload": {
+        "maximum_ram_size": 248832,
+        "maximum_size": 815104,
+        "speed": 115200,
+        "protocol": "nrfutil",
+        "protocols": [
+            "jlink",
+            "nrfjprog",
+            "nrfutil",
+            "stlink"
+        ],
+        "use_1200bps_touch": true,
+        "require_upload_port": true,
+        "wait_for_upload_port": true
+    },
+    "url": "https://www.rakwireless.com",
+    "vendor": "RAKwireless"
+}

docker-compose.yml

@@ -0,0 +1,13 @@
+version: "3.7"
+
+services:
+  meshtastic-node:
+    build: .
+    deploy:
+      mode: replicated
+      replicas: 4
+    networks:
+      - mesh
+    
+networks:
+  mesh:

docs/.well-known/assetlinks.json

@@ -1,9 +0,0 @@
-[{
-  "relation": ["delegate_permission/common.handle_all_urls"],
-  "target": {
-    "namespace": "android_app",
-    "package_name": "com.geeksville.mesh",
-    "sha256_cert_fingerprints":
-    ["D0:05:E7:8B:D2:1B:FA:94:56:1D:6B:90:EB:53:07:1A:74:4F:D9:C2:6F:13:87:6A:D9:17:4F:C2:59:48:02:9D"]
-  }
-}]

docs/CNAME

@@ -1 +0,0 @@
-www.meshtastic.org

docs/README.md

@@ -1,82 +0,0 @@
-# What is Meshtastic?
-
-Meshtastic is a project that lets you use
-inexpensive ($30 ish) GPS radios as an extensible, super long battery life mesh GPS communicator.  These radios are great for hiking, skiing, paragliding - 
-essentially any hobby where you don't have reliable internet access.  Each member of your private mesh can always see the location and distance of all other
-members and any text messages sent to your group chat.
-
-The radios automatically create a mesh to forward packets as needed, so everyone in the group can receive messages from even the furthest member.  The radios
-will optionally work with your phone, but no phone is required.
-
-### Uses
-
-* Outdoor sports where cellular coverage is limited. (Hiking, Skiing, Boating, Paragliding, Gliders etc..)
-* Applications where closed source GPS communicators just won't cut it (it is easy to add features for glider pilots etc...)
-* Secure long-range communication within groups without depending on cellular providers
-* Finding your lost kids ;-)
-
-[![Youtube video demo](desk-video-screenshot.png)](https://www.youtube.com/watch?v=WlNbMbVZlHI "Meshtastic early demo")
-
-### Features
-Not all of these features are fully implemented yet - see **important** disclaimers below.  But they should be in by the time we decide to call this project beta (three months?)
-
-* Very long battery life (should be about eight days with the beta software)
-* Built in GPS and [LoRa](https://en.wikipedia.org/wiki/LoRa) radio, but we manage the radio automatically for you
-* Long range - a few miles per node but each node will forward packets as needed
-* Shows direction and distance to all members of your channel
-* Directed or broadcast text messages for channel members
-* Open and extensible codebase supporting multiple hardware vendors - no lock in to one vendor
-* Communication API for bluetooth devices (such as our Android app) to use the mesh.  So if you have some application that needs long range low power networking, this might work for you.
-* Eventually (within a couple of months) we should have a modified version of Signal that works with this project.
-* Very easy sharing of private secured channels.  Just share a special link or QR code with friends and they can join your encrypted mesh
- 
-This project is currently in early alpha - if you have questions please join our chat [![Join the chat at https://gitter.im/Meshtastic/community](https://badges.gitter.im/Meshtastic/community.svg)](https://gitter.im/Meshtastic/community?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge&utm_content=badge).
-
-This software is 100% open source and developed by a group of hobbyist experimenters.  No warranty is provided, if you'd like to improve it - we'd love your help.  Please post in the [chat](https://gitter.im/Meshtastic/community).  
-
-# Updates
-
-Note: Updates are happening almost daily, only major updates are listed below.  For more details see our chat, github releases or the Android alpha tester emails.
-
-* 03/03/2020 - 0.0.9 of the Android app and device code is released.  Still an alpha but fairly functional.
-* 02/25/2020 - 0.0.4 of the Android app is released.  This is a very early alpha, see below to join the alpha-testers group.
-* 02/23/2020 - 0.0.4 release.  Still very bleeding edge but much closer to the final power management, a charged T-BEAM should run for many days with this load.  If you'd like to try it, we'd love your feedback.  Click [here](https://github.com/meshtastic/Meshtastic-esp32/blob/master/README.md) for instructions.
-* 02/20/2020 - Our first alpha release (0.0.3) of the radio software is ready brave early people.  
-
-## Meshtastic Android app
-Once out of alpha the companion Android application will be released here:
-
-[![Download at https://play.google.com/store/apps/details?id=com.geeksville.mesh](https://play.google.com/intl/en_us/badges/static/images/badges/en_badge_web_generic.png)](https://play.google.com/store/apps/details?id=com.geeksville.mesh&referrer=utm_source%3Dhomepage%26anid%3Dadmob)
-
-But if you want the bleeding edge app now, we'd love to have your help testing.  Three steps to opt-in to the alpha- test:
-
-1. Join [this Google group](https://groups.google.com/forum/#!forum/meshtastic-alpha-testers) with the account you use in Google Play.
-2. Go to this [URL](https://play.google.com/apps/testing/com.geeksville.mesh) to opt-in to the alpha test.
-3. If you encounter any problems or have questions, post in our gitter chat and we'll help.
-
-If you'd like to help with development, the source code is [on github](https://github.com/meshtastic/Meshtastic-Android).
-
-## Supported hardware
-We currently support two brands of radios.  The [TTGO T-Beam](https://www.aliexpress.com/item/4000119152086.html) and the [Heltec LoRa 32](https://heltec.org/project/wifi-lora-32/).  Most people should buy the T-Beam and a 18650 battery (total cost less than $35).  Make
-sure to buy the frequency range which is legal for your country.  For the USA, you should buy the 915MHz version.  Getting a version that include a screen is optional, but highly recommended.
-
-Instructions for installing prebuilt firmware can be found [here](https://github.com/meshtastic/Meshtastic-esp32/blob/master/README.md).
-
-For a nice TTGO 3D printable case see this [design](https://www.thingiverse.com/thing:3773717) by [bsiege](https://www.thingiverse.com/bsiege).
-For a nice Heltec 3D printable case see this [design](https://www.thingiverse.com/thing:3125854) by [ornotermes](https://www.thingiverse.com/ornotermes).
-
-# Disclaimers
-
-This project is still pretty young but moving at a pretty good pace.  Not all features are fully implemented in the current alpha builds.
-Most of these problems should be solved by the beta release:
-
-* We don't make these devices and they haven't been tested by UL or the FCC.  If you use them you are experimenting and we can't promise they won't burn your house down ;-)
-* Encryption is turned off for now
-* A number of (straightforward) software work items have to be completed before battery life matches our measurements, currently battery life is about three days.  Join us on chat if you want the spreadsheet of power measurements/calculations.
-* The current Android GUI is pretty ugly still
-* The Android API needs to be documented better
-* The Bluetooth API needs to be documented better 
-* The mesh protocol is turned off for now, currently we only send packets one hop distant
-* No one has written an iOS app yet ;-)
-
-For more details see the [device software TODO](https://github.com/meshtastic/Meshtastic-esp32/blob/master/TODO.md) or the [Android app TODO](https://github.com/meshtastic/Meshtastic-Android/blob/master/TODO.md).

docs/_config.yml

@@ -1,5 +0,0 @@
-theme: jekyll-theme-cayman
-
-title: Meshtastic
-description: An opensource hiking, pilot, skiing, Signal-App-extending GPS mesh communicator
-google_analytics: G-DRZ5H5EXHV

docs/editing-this-site.md

@@ -1,10 +0,0 @@
-If you'd like to edit this website and test it locally:
-
-Not yet implemented:
-Per https://help.github.com/en/github/working-with-github-pages/testing-your-github-pages-site-locally-with-jekyll
-
-* follow instructions here: https://jekyllrb.com/docs/installation/ubuntu/
-* run "run-locally.sh"
-* view webpages at localhost:4000
-
-The template seems to come from here: https://github.com/pages-themes/cayman