Migrate all of the Meshtastic API attributes into the ini as a source of truth (#9214)

* Migrate all of the Meshtastic API attributes into the ini as a source of truth

* Cleanup garbage coalescing

* Another spot

* We already account for inkhud and mui

* Consolidate

* Removed them

* Boogers

* Infer

* Copying manifest should always succeed

* Remove portduino guards

* Rename

* None

variants/esp32/diy/dr-dev/platformio.ini

@@ -1,5 +1,12 @@
 ; Port to Disaster Radio's ESP32-v3 Dev Board
 [env:meshtastic-dr-dev]
+custom_meshtastic_hw_model = 41
+custom_meshtastic_hw_model_slug = DR_DEV
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = false
+custom_meshtastic_display_name = DR-DEV
+custom_meshtastic_tags = DIY
+
 extends = esp32_base
 board = esp32doit-devkit-v1
 board_level = extra

variants/esp32/diy/hydra/platformio.ini

@@ -1,5 +1,13 @@
 ; Hydra - Meshtastic DIY v1 hardware with some specific changes
 [env:hydra]
+custom_meshtastic_hw_model = 39
+custom_meshtastic_hw_model_slug = HYDRA
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = Hydra
+custom_meshtastic_tags = DIY
+
 extends = esp32_base
 board = esp32doit-devkit-v1
 build_flags =

variants/esp32/diy/v1/platformio.ini

@@ -1,5 +1,14 @@
 ; Meshtastic DIY v1 by Nano VHF Schematic based on ESP32-WROOM-32 (38 pins) devkit & EBYTE E22 SX1262/SX1268 module
 [env:meshtastic-diy-v1]
+custom_meshtastic_hw_model = 39
+custom_meshtastic_hw_model_slug = DIY_V1
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = DIY V1
+custom_meshtastic_images = diy.svg
+custom_meshtastic_tags = DIY
+
 extends = esp32_base
 board = esp32doit-devkit-v1
 board_check = true

variants/esp32/heltec_v1/platformio.ini

@@ -1,4 +1,11 @@
 [env:heltec-v1]
+custom_meshtastic_hw_model = 11
+custom_meshtastic_hw_model_slug = HELTEC_V1
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = false
+custom_meshtastic_display_name = Heltec V1
+custom_meshtastic_tags = Heltec
+
 ;build_type = debug ; to make it possible to step through our jtag debugger 
 extends = esp32_base
 board_level = extra

variants/esp32/heltec_v2.1/platformio.ini

@@ -1,4 +1,11 @@
 [env:heltec-v2_1]
+custom_meshtastic_hw_model = 10
+custom_meshtastic_hw_model_slug = HELTEC_V2_1
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = false
+custom_meshtastic_display_name = Heltec V2.1
+custom_meshtastic_tags = Heltec
+
 board_level = extra
 ;build_type = debug ; to make it possible to step through our jtag debugger 
 extends = esp32_base

variants/esp32/heltec_v2/platformio.ini

@@ -1,4 +1,11 @@
 [env:heltec-v2_0]
+custom_meshtastic_hw_model = 5
+custom_meshtastic_hw_model_slug = HELTEC_V2_0
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = false
+custom_meshtastic_display_name = Heltec V2.0
+custom_meshtastic_tags = Heltec
+
 ;build_type = debug ; to make it possible to step through our jtag debugger
 board_level = extra
 extends = esp32_base

variants/esp32/m5stack_core/platformio.ini

@@ -1,4 +1,12 @@
 [env:m5stack-core]
+custom_meshtastic_hw_model = 42
+custom_meshtastic_hw_model_slug = M5STACK
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = M5 Stack
+custom_meshtastic_tags = M5Stack
+
 extends = esp32_base
 board = m5stack-core-esp32
 monitor_filters = esp32_exception_decoder

variants/esp32/nano-g1-explorer/platformio.ini

@@ -1,5 +1,13 @@
 ; The 1.0 release of the nano-g1-explorer board 
 [env:nano-g1-explorer]
+custom_meshtastic_hw_model = 17
+custom_meshtastic_hw_model_slug = NANO_G1_EXPLORER
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = Nano G1 Explorer
+custom_meshtastic_tags = B&Q
+
 extends = esp32_base
 board = ttgo-t-beam
 build_flags = 

variants/esp32/nano-g1/platformio.ini

@@ -1,5 +1,13 @@
 ; The 1.0 release of the nano-g1 board 
 [env:nano-g1]
+custom_meshtastic_hw_model = 14
+custom_meshtastic_hw_model_slug = NANO_G1
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = Nano G1
+custom_meshtastic_tags = B&Q
+
 extends = esp32_base
 board = ttgo-t-beam
 build_flags = 

variants/esp32/radiomaster_900_bandit_nano/platformio.ini

@@ -1,4 +1,12 @@
 [env:radiomaster_900_bandit_nano]
+custom_meshtastic_hw_model = 64
+custom_meshtastic_hw_model_slug = RADIOMASTER_900_BANDIT_NANO
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 2
+custom_meshtastic_display_name = RadioMaster 900 Bandit Nano
+custom_meshtastic_tags = RadioMaster
+
 extends = esp32_base
 board = esp32doit-devkit-v1
 build_flags =

variants/esp32/rak11200/platformio.ini

@@ -1,4 +1,13 @@
 [env:rak11200]
+custom_meshtastic_hw_model = 13
+custom_meshtastic_hw_model_slug = RAK11200
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = RAK WisBlock 11200
+custom_meshtastic_images = rak11200.svg
+custom_meshtastic_tags = RAK
+
 extends = esp32_base
 board = wiscore_rak11200
 board_level = pr

variants/esp32/station-g1/platformio.ini

@@ -1,5 +1,13 @@
 ; The 1.0 release of the nano-g1 board 
 [env:station-g1]
+custom_meshtastic_hw_model = 25
+custom_meshtastic_hw_model_slug = STATION_G1
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = Station G1
+custom_meshtastic_tags = B&Q
+
 extends = esp32_base
 board = ttgo-t-beam
 build_flags = 

variants/esp32/tbeam/platformio.ini

@@ -1,5 +1,14 @@
 ; The 1.0 release of the TBEAM board 
 [env:tbeam]
+custom_meshtastic_hw_model = 4
+custom_meshtastic_hw_model_slug = TBEAM
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = LILYGO T-Beam
+custom_meshtastic_images = tbeam.svg
+custom_meshtastic_tags = LilyGo
+
 extends = esp32_base
 board = ttgo-t-beam
 

variants/esp32/tbeam_v07/platformio.ini

@@ -1,5 +1,12 @@
 ; The original TBEAM board without the AXP power chip and a few other changes
 [env:tbeam0_7]
+custom_meshtastic_hw_model = 6
+custom_meshtastic_hw_model_slug = TBEAM_V0P7
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = false
+custom_meshtastic_display_name = LILYGO T-Beam V0.7
+custom_meshtastic_tags = LilyGo
+
 board_level = extra
 extends = esp32_base
 board = ttgo-t-beam

variants/esp32/tlora_v1/platformio.ini

@@ -1,4 +1,11 @@
 [env:tlora-v1]
+custom_meshtastic_hw_model = 2
+custom_meshtastic_hw_model_slug = TLORA_V1
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = false
+custom_meshtastic_display_name = LILYGO T-LoRa V1
+custom_meshtastic_tags = LilyGo
+
 board_level = extra
 extends = esp32_base
 board = ttgo-lora32-v1

variants/esp32/tlora_v2/platformio.ini

@@ -1,4 +1,11 @@
 [env:tlora-v2]
+custom_meshtastic_hw_model = 1
+custom_meshtastic_hw_model_slug = TLORA_V2
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = false
+custom_meshtastic_display_name = LILYGO T-LoRa V2
+custom_meshtastic_tags = LilyGo
+
 board_level = extra
 extends = esp32_base
 board = ttgo-lora32-v1

variants/esp32/tlora_v2_1_16/platformio.ini

@@ -1,4 +1,13 @@
 [env:tlora-v2-1-1_6]
+custom_meshtastic_hw_model = 3
+custom_meshtastic_hw_model_slug = TLORA_V2_1_1P6
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = LILYGO T-LoRa V2.1-1.6
+custom_meshtastic_images = tlora-v2-1-1_6.svg
+custom_meshtastic_tags = LilyGo
+
 extends = esp32_base
 board = ttgo-lora32-v21
 board_check = true

variants/esp32/tlora_v2_1_18/platformio.ini

@@ -1,4 +1,13 @@
 [env:tlora-v2-1-1_8]
+custom_meshtastic_hw_model = 15
+custom_meshtastic_hw_model_slug = TLORA_V2_1_1P8
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = LILYGO T-LoRa V2.1-1.8
+custom_meshtastic_images = tlora-v2-1-1_8.svg
+custom_meshtastic_tags = LilyGo, 2.4GHz
+
 extends = esp32_base
 board_level = extra
 board = ttgo-lora32-v21

variants/esp32c3/heltec_esp32c3/platformio.ini

@@ -1,4 +1,13 @@
 [env:heltec-ht62-esp32c3-sx1262]
+custom_meshtastic_hw_model = 53
+custom_meshtastic_hw_model_slug = HELTEC_HT62
+custom_meshtastic_architecture = esp32-c3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Heltec HT62
+custom_meshtastic_images = heltec-ht62-esp32c3-sx1262.svg
+custom_meshtastic_tags = Heltec
+
 extends = esp32c3_base
 board = esp32-c3-devkitm-1
 board_level = pr

variants/esp32c6/m5stack_unitc6l/platformio.ini

@@ -1,4 +1,13 @@
 [env:m5stack-unitc6l]
+custom_meshtastic_hw_model = 111
+custom_meshtastic_hw_model_slug = M5STACK_C6L
+custom_meshtastic_architecture = esp32-c6
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = M5Stack Unit C6L
+custom_meshtastic_images = m5_c6l.svg
+custom_meshtastic_tags = M5Stack
+
 extends = esp32c6_base
 board = esp32-c6-devkitc-1
 ;OpenOCD flash method

variants/esp32s3/CDEBYTE_EoRa-S3/platformio.ini

@@ -1,4 +1,13 @@
 [env:CDEBYTE_EoRa-S3]
+custom_meshtastic_hw_model = 61
+custom_meshtastic_hw_model_slug = CDEBYTE_EORA_S3
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = EBYTE EoRa-S3
+custom_meshtastic_tags = EByte
+custom_meshtastic_requires_dfu = true
+
 extends = esp32s3_base
 board = CDEBYTE_EoRa-S3
 build_flags =

variants/esp32s3/ELECROW-ThinkNode-M2/platformio.ini

@@ -1,4 +1,14 @@
 [env:thinknode_m2]
+custom_meshtastic_hw_model = 90
+custom_meshtastic_hw_model_slug = THINKNODE_M2
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = ThinkNode M2
+custom_meshtastic_images = thinknode_m2.svg
+custom_meshtastic_tags = Elecrow
+custom_meshtastic_requires_dfu = false
+
 extends = esp32s3_base
 board = ESP32-S3-WROOM-1-N4
 build_flags =

variants/esp32s3/ELECROW-ThinkNode-M5/platformio.ini

@@ -1,4 +1,14 @@
 [env:thinknode_m5]
+custom_meshtastic_hw_model = 107
+custom_meshtastic_hw_model_slug = THINKNODE_M5
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = ThinkNode M5
+custom_meshtastic_images = thinknode_m1.svg
+custom_meshtastic_tags = Elecrow
+custom_meshtastic_requires_dfu = false
+
 extends = esp32s3_base
 board = ESP32-S3-WROOM-1-N4
 build_flags =

variants/esp32s3/elecrow_panel/platformio.ini

@@ -75,6 +75,17 @@ build_flags =
   -D DISPLAY_SET_RESOLUTION
 
 [env:elecrow-adv-24-28-tft]
+custom_meshtastic_hw_model = 97
+custom_meshtastic_hw_model_slug = CROWPANEL
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Crowpanel Adv 2.4/2.8 TFT
+custom_meshtastic_images = crowpanel_2_4.svg, crowpanel_2_8.svg
+custom_meshtastic_tags = Elecrow
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 16MB
+
 extends = crowpanel_small_esp32s3_base
 build_flags =
   ${crowpanel_small_esp32s3_base.build_flags}
@@ -99,6 +110,17 @@ build_flags =
   -D LGFX_TOUCH_ROTATION=0
 
 [env:elecrow-adv-35-tft]
+custom_meshtastic_hw_model = 97
+custom_meshtastic_hw_model_slug = CROWPANEL
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Crowpanel Adv 3.5 TFT
+custom_meshtastic_images = crowpanel_3_5.svg
+custom_meshtastic_tags = Elecrow
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 16MB
+
 extends = crowpanel_small_esp32s3_base
 board_level = pr
 build_flags =
@@ -127,6 +149,17 @@ build_flags =
 
 ; 4.3, 5.0, 7.0 inch 800x480 IPS (V1)
 [env:elecrow-adv1-43-50-70-tft]
+custom_meshtastic_hw_model = 97
+custom_meshtastic_hw_model_slug = CROWPANEL
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Crowpanel Adv 4.3/5.0/7.0 TFT
+custom_meshtastic_images = crowpanel_5_0.svg, crowpanel_7_0.svg
+custom_meshtastic_tags = Elecrow
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 16MB
+
 extends = crowpanel_large_esp32s3_base
 build_flags =
   ${crowpanel_large_esp32s3_base.build_flags}

variants/esp32s3/heltec_v3/platformio.ini

@@ -1,4 +1,14 @@
-[env:heltec-v3] 
+[env:heltec-v3]
+custom_meshtastic_hw_model = 43
+custom_meshtastic_hw_model_slug = HELTEC_V3
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Heltec V3
+custom_meshtastic_images = heltec-v3.svg, heltec-v3-case.svg
+custom_meshtastic_tags = Heltec
+custom_meshtastic_partition_scheme = 8MB
+ 
 extends = esp32s3_base
 board = heltec_wifi_lora_32_V3
 board_level = pr

variants/esp32s3/heltec_v4/platformio.ini

@@ -10,6 +10,17 @@ build_flags =
 
 
 [env:heltec-v4]
+custom_meshtastic_hw_model = 110
+custom_meshtastic_hw_model_slug = HELTEC_V4
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Heltec V4
+custom_meshtastic_images = heltec_v4.svg
+custom_meshtastic_tags = Heltec
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 16MB
+
 extends = heltec_v4_base
 build_flags = 
   ${heltec_v4_base.build_flags}

variants/esp32s3/heltec_vision_master_e213/platformio.ini

@@ -1,4 +1,15 @@
 [env:heltec-vision-master-e213]
+custom_meshtastic_hw_model = 67
+custom_meshtastic_hw_model_slug = HELTEC_VISION_MASTER_E213
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Heltec Vision Master E213
+custom_meshtastic_images = heltec-vision-master-e213.svg
+custom_meshtastic_tags = Heltec
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board = heltec_vision_master_e213
 board_build.partitions = default_8MB.csv

variants/esp32s3/heltec_vision_master_e290/platformio.ini

@@ -1,5 +1,16 @@
 ; Using the original screen class
 [env:heltec-vision-master-e290]
+custom_meshtastic_hw_model = 68
+custom_meshtastic_hw_model_slug = HELTEC_VISION_MASTER_E290
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Heltec Vision Master E290
+custom_meshtastic_images = heltec-vision-master-e290.svg
+custom_meshtastic_tags = Heltec
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board = heltec_vision_master_e290
 board_build.partitions = default_8MB.csv

variants/esp32s3/heltec_vision_master_t190/platformio.ini

@@ -1,4 +1,15 @@
 [env:heltec-vision-master-t190]
+custom_meshtastic_hw_model = 66
+custom_meshtastic_hw_model_slug = HELTEC_VISION_MASTER_T190
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Heltec Vision Master T190
+custom_meshtastic_images = heltec-vision-master-t190.svg
+custom_meshtastic_tags = Heltec
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board = heltec_vision_master_t190
 board_build.partitions = default_8MB.csv

variants/esp32s3/heltec_wireless_paper/platformio.ini

@@ -1,5 +1,15 @@
 ; Using the original screen class
 [env:heltec-wireless-paper]
+custom_meshtastic_hw_model = 49
+custom_meshtastic_hw_model_slug = HELTEC_WIRELESS_PAPER
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Heltec Wireless Paper
+custom_meshtastic_images = heltec-wireless-paper.svg
+custom_meshtastic_tags = Heltec
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board = heltec_wifi_lora_32_V3
 board_build.partitions = default_8MB.csv

variants/esp32s3/heltec_wireless_paper_v1/platformio.ini

@@ -1,4 +1,14 @@
 [env:heltec-wireless-paper-v1_0]
+custom_meshtastic_hw_model = 57
+custom_meshtastic_hw_model_slug = HELTEC_WIRELESS_PAPER_V1_0
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = false
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = Heltec Wireless Paper V1.0
+custom_meshtastic_images = heltec-wireless-paper-v1_0.svg
+custom_meshtastic_tags = Heltec
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board_level = extra
 board = heltec_wifi_lora_32_V3

variants/esp32s3/heltec_wireless_tracker/platformio.ini

@@ -1,4 +1,15 @@
 [env:heltec-wireless-tracker]
+custom_meshtastic_hw_model = 48
+custom_meshtastic_hw_model_slug = HELTEC_WIRELESS_TRACKER
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Heltec Wireless Tracker V1.1
+custom_meshtastic_images = heltec-wireless-tracker.svg
+custom_meshtastic_tags = Heltec
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board = heltec_wireless_tracker
 board_build.partitions = default_8MB.csv

variants/esp32s3/heltec_wireless_tracker_V1_0/platformio.ini

@@ -1,4 +1,14 @@
 [env:heltec-wireless-tracker-V1-0]
+custom_meshtastic_hw_model = 58
+custom_meshtastic_hw_model_slug = HELTEC_WIRELESS_TRACKER_V1_0
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = false
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = Heltec Wireless Tracker V1.0
+custom_meshtastic_images = heltec-wireless-tracker.svg
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board_level = extra
 board = heltec_wireless_tracker

variants/esp32s3/heltec_wsl_v3/platformio.ini

@@ -1,4 +1,14 @@
-[env:heltec-wsl-v3] 
+[env:heltec-wsl-v3]
+custom_meshtastic_hw_model = 44
+custom_meshtastic_hw_model_slug = HELTEC_WSL_V3
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Heltec Wireless Stick Lite V3
+custom_meshtastic_images = heltec-wsl-v3.svg
+custom_meshtastic_tags = Heltec
+custom_meshtastic_partition_scheme = 8MB
+ 
 extends = esp32s3_base
 board = heltec_wifi_lora_32_V3
 board_build.partitions = default_8MB.csv

variants/esp32s3/picomputer-s3/platformio.ini

@@ -1,4 +1,12 @@
 [env:picomputer-s3]
+custom_meshtastic_hw_model = 52
+custom_meshtastic_hw_model_slug = PICOMPUTER_S3
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = Pi Computer S3
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board = bpi_picow_esp32_s3
 board_check = true

variants/esp32s3/rak3312/platformio.ini

@@ -1,4 +1,15 @@
 [env:rak3312]
+custom_meshtastic_hw_model = 106
+custom_meshtastic_hw_model_slug = RAK3312
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = RAK3312
+custom_meshtastic_images = rak_3312.svg
+custom_meshtastic_tags = RAK
+custom_meshtastic_requires_dfu = false
+custom_meshtastic_partition_scheme = 16MB
+
 extends = esp32s3_base
 board = wiscore_rak3312
 board_level = pr

variants/esp32s3/seeed-sensecap-indicator/platformio.ini

@@ -1,5 +1,16 @@
 ; Seeed Studio SenseCAP Indicator
 [env:seeed-sensecap-indicator]
+custom_meshtastic_hw_model = 70
+custom_meshtastic_hw_model_slug = SENSECAP_INDICATOR
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Seeed SenseCAP Indicator
+custom_meshtastic_images = seeed-sensecap-indicator.svg
+custom_meshtastic_tags = Seeed
+custom_meshtastic_partition_scheme = 8MB
+ = true
+
 extends = esp32s3_base
 platform_packages =
     platformio/framework-arduinoespressif32 @ https://github.com/mverch67/arduino-esp32/archive/aef7fef6de3329ed6f75512d46d63bba12b09bb5.zip ; add_tca9535 (based on 2.0.16)

variants/esp32s3/seeed_xiao_s3/platformio.ini

@@ -1,4 +1,15 @@
 [env:seeed-xiao-s3]
+custom_meshtastic_hw_model = 81
+custom_meshtastic_hw_model_slug = SEEED_XIAO_S3
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = Seeed Xiao ESP32-S3
+custom_meshtastic_images = seeed-xiao-s3.svg
+custom_meshtastic_tags = Seeed
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board = seeed-xiao-s3
 board_level = pr

variants/esp32s3/station-g2/platformio.ini

@@ -1,4 +1,15 @@
 [env:station-g2]
+custom_meshtastic_hw_model = 31
+custom_meshtastic_hw_model_slug = STATION_G2
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 2
+custom_meshtastic_display_name = Station G2
+custom_meshtastic_images = station-g2.svg
+custom_meshtastic_tags = B&Q
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 16MB
+
 extends = esp32s3_base
 board = station-g2
 board_level = pr

variants/esp32s3/t-deck-pro/platformio.ini

@@ -1,4 +1,15 @@
 [env:t-deck-pro]
+custom_meshtastic_hw_model = 102
+custom_meshtastic_hw_model_slug = T_DECK_PRO
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = LILYGO T-Deck Pro
+custom_meshtastic_images = tdeck_pro.svg
+custom_meshtastic_tags = LilyGo
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 16MB
+
 extends = esp32s3_base
 board = t-deck-pro
 board_check = true

variants/esp32s3/t-deck/platformio.ini

@@ -1,5 +1,16 @@
 ; LilyGo T-Deck
 [env:t-deck]
+custom_meshtastic_hw_model = 50
+custom_meshtastic_hw_model_slug = T_DECK
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = LILYGO T-Deck
+custom_meshtastic_images = t-deck.svg
+custom_meshtastic_tags = LilyGo
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 16MB
+
 extends = esp32s3_base
 board = t-deck
 board_check = true

variants/esp32s3/t-watch-s3/platformio.ini

@@ -1,5 +1,15 @@
 ; LilyGo T-Watch S3
 [env:t-watch-s3]
+custom_meshtastic_hw_model = 51
+custom_meshtastic_hw_model_slug = T_WATCH_S3
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = LILYGO T-Watch S3
+custom_meshtastic_images = t-watch-s3.svg
+custom_meshtastic_tags = LilyGo
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board = t-watch-s3
 board_check = true

variants/esp32s3/tbeam-s3-core/platformio.ini

@@ -1,5 +1,16 @@
 ; The 1.0 release of the LilyGo TBEAM-S3-Core board 
 [env:tbeam-s3-core]
+custom_meshtastic_hw_model = 12
+custom_meshtastic_hw_model_slug = LILYGO_TBEAM_S3_CORE
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = LILYGO T-Beam Supreme
+custom_meshtastic_images = tbeam-s3-core.svg
+custom_meshtastic_tags = LilyGo
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board = tbeam-s3-core
 board_build.partitions = default_8MB.csv

variants/esp32s3/tlora-pager/platformio.ini

@@ -1,5 +1,16 @@
 ; LilyGo T-Lora-Pager
 [env:tlora-pager]
+custom_meshtastic_hw_model = 103
+custom_meshtastic_hw_model_slug = T_LORA_PAGER
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = LILYGO T-LoRa Pager
+custom_meshtastic_images = lilygo-tlora-pager.svg
+custom_meshtastic_tags = LilyGo
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 16MB
+
 extends = esp32s3_base
 board = t-deck-pro ; same as T-Deck Pro
 board_check = true

variants/esp32s3/tlora_t3s3_epaper/platformio.ini

@@ -1,4 +1,14 @@
 [env:tlora-t3s3-epaper]
+custom_meshtastic_hw_model = 16
+custom_meshtastic_hw_model_slug = TLORA_T3_S3
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = LILYGO T-LoRa T3-S3 E-Ink
+custom_meshtastic_images = tlora-t3s3-epaper.svg
+custom_meshtastic_tags = LilyGo
+custom_meshtastic_requires_dfu = true
+
 extends = esp32s3_base
 board = tlora-t3s3-v1
 board_check = true

variants/esp32s3/tlora_t3s3_v1/platformio.ini

@@ -1,4 +1,14 @@
 [env:tlora-t3s3-v1]
+custom_meshtastic_hw_model = 16
+custom_meshtastic_hw_model_slug = TLORA_T3_S3
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = LILYGO T-LoRa T3-S3
+custom_meshtastic_images = tlora-t3s3-v1.svg
+custom_meshtastic_tags = LilyGo
+custom_meshtastic_requires_dfu = true
+
 extends = esp32s3_base
 board = tlora-t3s3-v1
 board_check = true

variants/esp32s3/tracksenger/platformio.ini

@@ -1,4 +1,13 @@
 [env:tracksenger]
+custom_meshtastic_hw_model = 48
+custom_meshtastic_hw_model_slug = HELTEC_WIRELESS_TRACKER
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = TrackSenger (small TFT)
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board = heltec_wireless_tracker
 board_build.partitions = default_8MB.csv
@@ -16,6 +25,15 @@ lib_deps =
   lovyan03/LovyanGFX@1.2.7
 
 [env:tracksenger-lcd]
+custom_meshtastic_hw_model = 48
+custom_meshtastic_hw_model_slug = HELTEC_WIRELESS_TRACKER
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = false
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = TrackSenger (big TFT)
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board = heltec_wireless_tracker
 board_build.partitions = default_8MB.csv
@@ -33,6 +51,14 @@ lib_deps =
   lovyan03/LovyanGFX@1.2.7
 
 [env:tracksenger-oled]
+custom_meshtastic_hw_model = 48
+custom_meshtastic_hw_model_slug = HELTEC_WIRELESS_TRACKER
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = TrackSenger (big OLED)
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board = heltec_wireless_tracker
 board_build.partitions = default_8MB.csv

variants/esp32s3/unphone/platformio.ini

@@ -1,6 +1,15 @@
 ; platformio.ini for unphone meshtastic
 
 [env:unphone]
+custom_meshtastic_hw_model = 59
+custom_meshtastic_hw_model_slug = UNPHONE
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = unPhone
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board = unphone
 board_build.partitions = partition-table-8MB.csv

variants/nrf52840/ELECROW-ThinkNode-M1/platformio.ini

@@ -1,5 +1,14 @@
 ; First prototype eink/nrf52840/sx1262 device
 [env:thinknode_m1]
+custom_meshtastic_hw_model = 89
+custom_meshtastic_hw_model_slug = THINKNODE_M1
+custom_meshtastic_architecture = nrf52840
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = ThinkNode M1
+custom_meshtastic_images = thinknode_m1.svg
+custom_meshtastic_tags = Elecrow
+
 extends = nrf52840_base
 board = ThinkNode-M1
 board_check = true

variants/nrf52840/ELECROW-ThinkNode-M3/platformio.ini

@@ -1,8 +1,17 @@
 [env:thinknode_m3]
+custom_meshtastic_support_level = 1
+custom_meshtastic_images = thinknode_m3.svg
+custom_meshtastic_tags = Elecrow
+
 extends = nrf52840_base
 board = ThinkNode-M3
 board_check = true
 debug_tool = jlink
+custom_meshtastic_hw_model = 115
+custom_meshtastic_hw_model_slug = THINKNODE_M3
+custom_meshtastic_architecture = nrf52840
+custom_meshtastic_display_name = Elecrow ThinkNode M3
+custom_meshtastic_actively_supported = true
 build_flags = 
   ${nrf52840_base.build_flags} 
   -Ivariants/nrf52840/ELECROW-ThinkNode-M3

variants/nrf52840/ELECROW-ThinkNode-M6/platformio.ini

@@ -1,5 +1,14 @@
 ; ThinkNode M6 - Outdoor Solar Power nrf52840/sx1262 device
 [env:thinknode_m6]
+custom_meshtastic_hw_model = 120
+custom_meshtastic_hw_model_slug = THINKNODE_M6
+custom_meshtastic_architecture = nrf52840
+custom_meshtastic_actively_supported = false
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = ThinkNode M6
+custom_meshtastic_images = thinknode_m6.svg
+custom_meshtastic_tags = Elecrow
+
 extends = nrf52840_base
 board = ThinkNode-M6
 board_check = true

variants/nrf52840/canaryone/platformio.ini

@@ -1,5 +1,13 @@
 ; Public Beta oled/nrf52840/sx1262 device
 [env:canaryone]
+custom_meshtastic_hw_model = 29
+custom_meshtastic_hw_model_slug = CANARYONE
+custom_meshtastic_architecture = nrf52840
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = Canary One
+custom_meshtastic_tags = Canary
+
 extends = nrf52840_base
 board = canaryone
 debug_tool = jlink

variants/nrf52840/diy/nrf52_promicro_diy_tcxo/platformio.ini

@@ -1,5 +1,15 @@
 ; Promicro + E22(0)-xxxM / HT-RA62 modules board variant - DIY - with TCXO
 [env:nrf52_promicro_diy_tcxo]
+custom_meshtastic_hw_model = 63
+custom_meshtastic_hw_model_slug = NRF52_PROMICRO_DIY
+custom_meshtastic_architecture = nrf52840
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = NRF52 Pro-micro DIY
+custom_meshtastic_images = promicro.svg
+custom_meshtastic_tags = DIY
+custom_meshtastic_requires_dfu = true
+
 extends = nrf52840_base
 board = promicro-nrf52840
 build_flags = ${nrf52840_base.build_flags}

variants/nrf52840/heltec_mesh_node_t114/platformio.ini

@@ -1,5 +1,14 @@
 ; First prototype nrf52840/sx1262 device
 [env:heltec-mesh-node-t114]
+custom_meshtastic_hw_model = 69
+custom_meshtastic_hw_model_slug = HELTEC_MESH_NODE_T114
+custom_meshtastic_architecture = nrf52840
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Heltec Mesh Node T114
+custom_meshtastic_images = heltec-mesh-node-t114.svg, heltec-mesh-node-t114-case.svg
+custom_meshtastic_tags = Heltec
+
 extends = nrf52840_base
 board = heltec_mesh_node_t114
 board_level = pr

variants/nrf52840/heltec_mesh_pocket/platformio.ini

@@ -1,8 +1,20 @@
 ; First prototype nrf52840/sx1262 device
 [env:heltec-mesh-pocket-5000]
+custom_meshtastic_support_level = 1
+custom_meshtastic_images = heltec_mesh_pocket.svg
+custom_meshtastic_tags = Heltec
+
 extends = nrf52840_base
 board = heltec_mesh_pocket
 debug_tool = jlink
+custom_device_hw_model = 94
+custom_meshtastic_hw_model = 94
+custom_meshtastic_hw_model_slug = HELTEC_MESH_POCKET
+custom_meshtastic_architecture = nrf52840
+custom_meshtastic_display_name = Heltec Mesh Pocket
+custom_meshtastic_actively_supported = true
+custom_meshtastic_variant = 5000mAh
+custom_meshtastic_key = heltec_mesh_pocket
 
 # add -DCFG_SYSVIEW if you want to use the Segger systemview tool for OS profiling.
 build_flags = ${nrf52840_base.build_flags}
@@ -31,6 +43,13 @@ lib_deps =
 [env:heltec-mesh-pocket-5000-inkhud]
 extends = nrf52840_base, inkhud
 board = heltec_mesh_pocket
+custom_meshtastic_hw_model = 94
+custom_meshtastic_hw_model_slug = HELTEC_MESH_POCKET
+custom_meshtastic_architecture = nrf52840
+custom_meshtastic_display_name = Heltec Mesh Pocket
+custom_meshtastic_actively_supported = true
+custom_meshtastic_variant = 5000mAh InkHUD
+custom_meshtastic_key = heltec_mesh_pocket
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/heltec_mesh_pocket> ${inkhud.build_src_filter}
 build_flags = 
   ${inkhud.build_flags}
@@ -45,9 +64,20 @@ lib_deps =
 
 ; First prototype nrf52840/sx1262 device
 [env:heltec-mesh-pocket-10000]
+custom_meshtastic_support_level = 1
+custom_meshtastic_images = heltec_mesh_pocket.svg
+custom_meshtastic_tags = Heltec
+
 extends = nrf52840_base
 board = heltec_mesh_pocket
 debug_tool = jlink
+custom_meshtastic_hw_model = 94
+custom_meshtastic_hw_model_slug = HELTEC_MESH_POCKET
+custom_meshtastic_architecture = nrf52840
+custom_meshtastic_display_name = Heltec Mesh Pocket
+custom_meshtastic_actively_supported = true
+custom_meshtastic_variant = 10000mAh
+custom_meshtastic_key = heltec_mesh_pocket
 
 # add -DCFG_SYSVIEW if you want to use the Segger systemview tool for OS profiling.
 build_flags = ${nrf52840_base.build_flags}
@@ -76,6 +106,13 @@ lib_deps =
 [env:heltec-mesh-pocket-10000-inkhud]
 extends = nrf52840_base, inkhud
 board = heltec_mesh_pocket
+custom_meshtastic_hw_model = 94
+custom_meshtastic_hw_model_slug = HELTEC_MESH_POCKET
+custom_meshtastic_architecture = nrf52840
+custom_meshtastic_display_name = Heltec Mesh Pocket
+custom_meshtastic_actively_supported = true
+custom_meshtastic_variant = 10000mAh InkHUD
+custom_meshtastic_key = heltec_mesh_pocket
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/heltec_mesh_pocket> ${inkhud.build_src_filter}
 build_flags = 
   ${inkhud.build_flags}

variants/nrf52840/heltec_mesh_solar/platformio.ini

@@ -19,6 +19,15 @@ lib_deps =
   bblanchon/ArduinoJson@6.21.4
 
 [env:heltec-mesh-solar]
+custom_meshtastic_hw_model = 108
+custom_meshtastic_hw_model_slug = HELTEC_MESH_SOLAR
+custom_meshtastic_architecture = nrf52840
+custom_meshtastic_actively_supported = false
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Heltec MeshSolar
+custom_meshtastic_images = heltec-mesh-solar.svg
+custom_meshtastic_tags = Heltec
+
 extends = heltec_mesh_solar_base
 build_flags = ${heltec_mesh_solar_base.build_flags}
     -DSPI_INTERFACES_COUNT=1

variants/nrf52840/muzi_base/platformio.ini

@@ -1,4 +1,13 @@
 [env:muzi-base]
+custom_meshtastic_hw_model = 93
+custom_meshtastic_hw_model_slug = MUZI_BASE
+custom_meshtastic_architecture = nrf52840
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = muzi BASE
+custom_meshtastic_images = muzi_base.svg
+custom_meshtastic_tags = muzi
+
 extends = nrf52840_base
 board = muzi-base
 build_flags = ${nrf52840_base.build_flags}

variants/nrf52840/nano-g2-ultra/platformio.ini

@@ -1,5 +1,14 @@
 ; First prototype eink/nrf52840/sx1262 device
 [env:nano-g2-ultra]
+custom_meshtastic_hw_model = 18
+custom_meshtastic_hw_model_slug = NANO_G2_ULTRA
+custom_meshtastic_architecture = nrf52840
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 2
+custom_meshtastic_display_name = Nano G2 Ultra
+custom_meshtastic_images = nano-g2-ultra.svg
+custom_meshtastic_tags = B&Q
+
 extends = nrf52840_base
 board = nano-g2-ultra
 debug_tool = jlink

variants/nrf52840/r1-neo/platformio.ini

@@ -1,5 +1,14 @@
 ; The R1 Neo board
 [env:r1-neo]
+custom_meshtastic_hw_model = 101
+custom_meshtastic_hw_model_slug = MUZI_R1_NEO
+custom_meshtastic_architecture = nrf52840
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = muzi R1 Neo
+custom_meshtastic_images = muzi_r1_neo.svg
+custom_meshtastic_tags = muzi
+
 extends = nrf52840_base
 board = r1-neo
 board_check = true

variants/nrf52840/rak2560/platformio.ini

@@ -1,5 +1,14 @@
 ; Firmware for the WisMesh HUB RAK2560, including a onewire module to talk to the RAK 9154 solar battery.
 [env:rak2560]
+custom_meshtastic_hw_model = 22
+custom_meshtastic_hw_model_slug = WISMESH_HUB
+custom_meshtastic_architecture = nrf52840
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = RAK WisMesh Repeater
+custom_meshtastic_images = rak2560.svg
+custom_meshtastic_tags = RAK
+
 extends = nrf52840_base
 board = wiscore_rak4631
 board_check = true

variants/nrf52840/rak3401_1watt/platformio.ini

@@ -1,5 +1,15 @@
 ; The very slick RAK wireless RAK 4631 / 4630 board - Unified firmware for 5005/19003, with or without OLED RAK 1921
 [env:rak3401-1watt]
+custom_meshtastic_hw_model = 117
+custom_meshtastic_hw_model_slug = RAK3401
+custom_meshtastic_architecture = nrf52840
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = RAK3401 1W
+custom_meshtastic_images = rak3401.svg
+custom_meshtastic_tags = RAK
+custom_meshtastic_requires_dfu = true
+
 extends = nrf52840_base
 board = wiscore_rak4631
 board_check = true

variants/nrf52840/rak4631/platformio.ini

@@ -1,5 +1,14 @@
 ; The very slick RAK wireless RAK 4631 / 4630 board - Unified firmware for 5005/19003, with or without OLED RAK 1921
 [env:rak4631]
+custom_meshtastic_hw_model = 9
+custom_meshtastic_hw_model_slug = RAK4631
+custom_meshtastic_architecture = nrf52840
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = RAK WisBlock 4631
+custom_meshtastic_images = rak4631.svg, rak4631_case.svg
+custom_meshtastic_tags = RAK
+
 extends = nrf52840_base
 board = wiscore_rak4631
 board_level = pr

variants/nrf52840/rak4631_nomadstar_meteor_pro/platformio.ini

@@ -1,5 +1,14 @@
 ; NomadStar Meteor Pro based on RAK4631 with RGBW LED LP5562 support
 [env:rak4631_nomadstar_meteor_pro]
+custom_meshtastic_hw_model = 96
+custom_meshtastic_hw_model_slug = NOMADSTAR_METEOR_PRO
+custom_meshtastic_architecture = nrf52840
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = NomadStar Meteor Pro
+custom_meshtastic_images = meteor_pro.svg
+custom_meshtastic_tags = NomadStar
+
 extends = nrf52840_base
 board = wiscore_rak4631
 board_check = true

variants/nrf52840/rak_wismeshtag/platformio.ini

@@ -1,8 +1,17 @@
 ; The very slick RAK wireless RAK 4631 / 4630 board - Unified firmware for 5005/19003, with or without OLED RAK 1921
 [env:rak_wismeshtag]
+custom_meshtastic_support_level = 1
+custom_meshtastic_images = rak_wismesh_tag.svg
+custom_meshtastic_tags = RAK
+
 extends = nrf52840_base
 board = wiscore_rak4631
 board_check = true
+custom_meshtastic_hw_model = 105
+custom_meshtastic_hw_model_slug = WISMESH_TAG
+custom_meshtastic_architecture = nrf52840
+custom_meshtastic_display_name = RAK WisMesh Tag
+custom_meshtastic_actively_supported = true
 build_flags = ${nrf52840_base.build_flags}
   -I variants/nrf52840/rak_wismeshtag
   -D WISMESH_TAG

variants/nrf52840/rak_wismeshtap/platformio.ini

@@ -1,5 +1,14 @@
 ; The very slick RAK wireless RAK10701 Field Tester device.  Note you will have to flash to Arduino bootloader to use this firmware.  Be aware touch is not currently working.
 [env:rak_wismeshtap]
+custom_meshtastic_hw_model = 84
+custom_meshtastic_hw_model_slug = WISMESH_TAP
+custom_meshtastic_architecture = nrf52840
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = RAK WisMesh Tap
+custom_meshtastic_images = rak-wismeshtap.svg
+custom_meshtastic_tags = RAK
+
 extends = nrf52840_base
 board = wiscore_rak4631
 build_flags = ${nrf52840_base.build_flags}

variants/nrf52840/seeed_solar_node/platformio.ini

@@ -1,4 +1,13 @@
 [env:seeed_solar_node]
+custom_meshtastic_hw_model = 95
+custom_meshtastic_hw_model_slug = SEEED_SOLAR_NODE
+custom_meshtastic_architecture = nrf52840
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Seeed SenseCAP Solar Node
+custom_meshtastic_images = seeed_solar.svg
+custom_meshtastic_tags = Seeed
+
 board = seeed_solar_node
 extends = nrf52840_base
 ;board_level = extra

variants/nrf52840/seeed_wio_tracker_L1/platformio.ini

@@ -1,4 +1,14 @@
 [env:seeed_wio_tracker_L1]
+custom_meshtastic_hw_model = 99
+custom_meshtastic_hw_model_slug = SEEED_WIO_TRACKER_L1
+custom_meshtastic_architecture = nrf52840
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Seeed Wio Tracker L1
+custom_meshtastic_images = wio_tracker_l1_case.svg
+custom_meshtastic_tags = Seeed
+custom_meshtastic_requires_dfu = true
+
 board = seeed_wio_tracker_L1
 extends = nrf52840_base
 build_flags = ${nrf52840_base.build_flags} 

variants/nrf52840/seeed_wio_tracker_L1_eink/platformio.ini

@@ -1,4 +1,13 @@
 [env:seeed_wio_tracker_L1_eink]
+custom_meshtastic_hw_model = 100
+custom_meshtastic_hw_model_slug = SEEED_WIO_TRACKER_L1_EINK
+custom_meshtastic_architecture = nrf52840
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Seeed Wio Tracker L1 E-Ink
+custom_meshtastic_images = wio_tracker_l1_eink.svg
+custom_meshtastic_tags = Seeed
+
 board = seeed_wio_tracker_L1
 extends = nrf52840_base
 ;board_level = extra

variants/nrf52840/seeed_xiao_nrf52840_kit/platformio.ini

@@ -1,5 +1,14 @@
 ; Seeed Xiao BLE: https://wiki.seeedstudio.com/XIAO_BLE/
 [env:seeed_xiao_nrf52840_kit]
+custom_meshtastic_hw_model = 88
+custom_meshtastic_hw_model_slug = XIAO_NRF52_KIT
+custom_meshtastic_architecture = nrf52840
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Seeed Xiao NRF52840 Kit
+custom_meshtastic_images = seeed_xiao_nrf52_kit.svg
+custom_meshtastic_tags = Seeed
+
 extends = nrf52840_base
 board = xiao_ble_sense
 board_level = pr

variants/nrf52840/t-echo-lite/platformio.ini

@@ -1,5 +1,14 @@
 ; Using original screen class
 [env:t-echo-lite]
+custom_meshtastic_hw_model = 109
+custom_meshtastic_hw_model_slug = T_ECHO_LITE
+custom_meshtastic_architecture = nrf52840
+custom_meshtastic_actively_supported = false
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = LILYGO T-Echo Lite
+custom_meshtastic_images = techo_lite.svg
+custom_meshtastic_tags = LilyGo
+
 extends = nrf52840_base
 board = t-echo
 board_check = true

variants/nrf52840/t-echo/platformio.ini

@@ -1,5 +1,14 @@
 ; Using original screen class
 [env:t-echo]
+custom_meshtastic_hw_model = 7
+custom_meshtastic_hw_model_slug = T_ECHO
+custom_meshtastic_architecture = nrf52840
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = LILYGO T-Echo
+custom_meshtastic_images = t-echo.svg
+custom_meshtastic_tags = LilyGo
+
 extends = nrf52840_base
 board = t-echo
 board_level = pr

variants/nrf52840/tracker-t1000-e/platformio.ini

@@ -1,7 +1,16 @@
 [env:tracker-t1000-e]
+custom_meshtastic_support_level = 1
+custom_meshtastic_images = tracker-t1000-e.svg
+custom_meshtastic_tags = Seeed
+
 extends = nrf52840_base
 board = tracker-t1000-e
 board_level = pr
+custom_meshtastic_hw_model = 71
+custom_meshtastic_hw_model_slug = TRACKER_T1000_E
+custom_meshtastic_architecture = nrf52840
+custom_meshtastic_display_name = Seeed SenseCAP T1000-E
+custom_meshtastic_actively_supported = true
 build_flags = ${nrf52840_base.build_flags}
   -Ivariants/nrf52840/tracker-t1000-e
   -Isrc/platform/nrf52/softdevice

variants/nrf52840/wio-tracker-wm1110/platformio.ini

@@ -1,5 +1,15 @@
 ; The red tracker Dev Board with the WM1110 module
 [env:wio-tracker-wm1110]
+custom_meshtastic_hw_model = 21
+custom_meshtastic_hw_model_slug = WIO_WM1110
+custom_meshtastic_architecture = nrf52840
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = Seeed Wio WM1110 Tracker
+custom_meshtastic_images = wio-tracker-wm1110.svg
+custom_meshtastic_tags = Seeed
+custom_meshtastic_requires_dfu = true
+
 extends = nrf52840_base
 board = wio-tracker-wm1110
 build_flags = ${nrf52840_base.build_flags}

variants/rp2040/rak11310/platformio.ini

@@ -1,4 +1,14 @@
 [env:rak11310]
+custom_meshtastic_hw_model = 26
+custom_meshtastic_hw_model_slug = RAK11310
+custom_meshtastic_architecture = rp2040
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 2
+custom_meshtastic_display_name = RAK WisBlock 11310
+custom_meshtastic_images = rak11310.svg
+custom_meshtastic_tags = RAK
+custom_meshtastic_requires_dfu = true
+
 extends = rp2040_base
 board = rakwireless_rak11300
 board_level = pr

variants/rp2040/rp2040-lora/platformio.ini

@@ -1,4 +1,13 @@
 [env:rp2040-lora]
+custom_meshtastic_hw_model = 30
+custom_meshtastic_hw_model_slug = RP2040_LORA
+custom_meshtastic_architecture = rp2040
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 2
+custom_meshtastic_display_name = RP2040 LoRa
+custom_meshtastic_tags = Waveshare
+custom_meshtastic_requires_dfu = true
+
 extends = rp2040_base
 board = rpipico
 upload_protocol = picotool

variants/rp2040/rpipico/platformio.ini

@@ -1,4 +1,14 @@
 [env:pico]
+custom_meshtastic_hw_model = 47
+custom_meshtastic_hw_model_slug = RPI_PICO
+custom_meshtastic_architecture = rp2040
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = Raspberry Pi Pico
+custom_meshtastic_images = pico.svg
+custom_meshtastic_tags = RPi, DIY
+custom_meshtastic_requires_dfu = true
+
 extends = rp2040_base
 board = rpipico
 board_level = pr

variants/rp2040/rpipicow/platformio.ini

@@ -1,4 +1,14 @@
 [env:picow]
+custom_meshtastic_hw_model = 47
+custom_meshtastic_hw_model_slug = RPI_PICO
+custom_meshtastic_architecture = rp2040
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = Raspberry Pi Pico W
+custom_meshtastic_images = rpipicow.svg
+custom_meshtastic_tags = RPi, DIY
+custom_meshtastic_requires_dfu = true
+
 extends = rp2040_base
 board = rpipicow
 board_level = pr