rbxii3/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2026-01-29 05:01:54 +00:00
Code Issues Packages Projects Releases Wiki Activity

Dead defines removal

Browse Source
This commit is contained in:
Jonathan Bennett
2026-01-28 22:15:08 -06:00
parent e5138d26da
commit 084239dbad
20 changed files with 3 additions and 48 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
src/sleep.cpp
View File

@@ -241,7 +241,6 @@ void doDeepSleep(uint32_t msecToWake, bool skipPreflight = false, bool skipSaveN
#ifdef PIN_POWER_EN
digitalWrite(PIN_POWER_EN, LOW);
pinMode(PIN_POWER_EN, INPUT); // power off peripherals
// pinMode(PIN_POWER_EN1, INPUT_PULLDOWN);
#endif
#ifdef RAK_WISMESH_TAP_V2

1
variants/esp32/trackerd/variant.h
View File

@@ -10,7 +10,6 @@
#define LED_PIN 13 // 13 red, 2 blue, 15 red
// #define HAS_BUTTON 0
#define BUTTON_PIN 0
#define BUTTON_NEED_PULLUP

11
variants/esp32s3/hackaday-communicator/variant.h
View File

@@ -16,19 +16,10 @@
#define SLEEP_TIME 120
#define GPS_DEFAULT_NOT_PRESENT 1
// #define GPS_RX_PIN 44
// #define GPS_TX_PIN 43
// #define BATTERY_PIN 4 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
// ratio of voltage divider = 2.0 (RD2=100k, RD3=100k)
// #define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage.
// #define ADC_CHANNEL ADC1_GPIO4_CHANNEL
// keyboard
#define I2C_SDA 47 // I2C pins for this board
#define I2C_SCL 14
// #define KB_POWERON -1 // must be set to HIGH
// #define KB_SLAVE_ADDRESS TDECK_KB_ADDR // 0x55
// #define KB_BL_PIN 46 // not used for now
#define KB_INT 13
@@ -43,11 +34,9 @@
#define LORA_MOSI 3
#define LORA_CS 17
// #define LORA_DIO0 -1 // a No connect on the SX1262 module
#define LORA_RESET 18
#define LORA_DIO1 16 // SX1262 IRQ
#define LORA_DIO2 15 // SX1262 BUSY
// #define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
#define SX126X_CS LORA_CS
#define SX126X_DIO1 LORA_DIO1

1
variants/esp32s3/rak_wismesh_tap_v2/variant.h
View File

@@ -46,7 +46,6 @@
#define SPI_MISO (10)
#define SPI_CS (12)
#define HAS_BUTTON 1
#define BUTTON_PIN 0
#define USE_VIRTUAL_KEYBOARD 1

2
variants/nrf52840/ELECROW-ThinkNode-M1/variant.h
View File

@@ -169,8 +169,6 @@ External serial flash WP25R1635FZUIL0
#define PIN_SPI_MOSI (0 + 22)
#define PIN_SPI_SCK (0 + 19)
#define PIN_PWR_EN (0 + 6)
// To debug via the segger JLINK console rather than the CDC-ACM serial device
// #define USE_SEGGER

2
variants/nrf52840/gat562_mesh_trial_tracker/variant.h
View File

@@ -60,8 +60,6 @@ extern "C" {
#define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion
#define BUTTON_NEED_PULLUP
#define PIN_BUTTON2 12
#define PIN_BUTTON3 24
#define PIN_BUTTON4 25
/*
* Analog pins

2
variants/nrf52840/heltec_mesh_node_t114-inkhud/variant.h
View File

@@ -137,8 +137,6 @@ No longer populated on PCB
#define PIN_SPI1_MOSI PIN_EINK_MOSI
#define PIN_SPI1_SCK PIN_EINK_SCLK
// #define PIN_PWR_EN (0 + 6)
// To debug via the segger JLINK console rather than the CDC-ACM serial device
// #define USE_SEGGER

2
variants/nrf52840/heltec_mesh_node_t114/variant.h
View File

@@ -192,8 +192,6 @@ No longer populated on PCB
#define PIN_SPI_MOSI (0 + 22)
#define PIN_SPI_SCK (0 + 19)
// #define PIN_PWR_EN (0 + 6)
// To debug via the segger JLINK console rather than the CDC-ACM serial device
// #define USE_SEGGER

2
variants/nrf52840/heltec_mesh_pocket/variant.h
View File

@@ -98,8 +98,6 @@ No longer populated on PCB
#define PIN_SPI_MOSI (0 + 5)
#define PIN_SPI_SCK (0 + 4)
// #define PIN_PWR_EN (0 + 6)
// To debug via the segger JLINK console rather than the CDC-ACM serial device
// #define USE_SEGGER

8
variants/nrf52840/heltec_mesh_solar/variant.h
View File

@@ -39,8 +39,8 @@ extern "C" {
#define NUM_ANALOG_INPUTS (1)
#define NUM_ANALOG_OUTPUTS (0)
#define PIN_LED1 (32 + 15) // green (confirmed on 1.0 board)
#define LED_BLUE PIN_LED1 // fake for bluefruit library
#define PIN_LED1 (32 + 15) // green (confirmed on 1.0 board)
#define LED_BLUE PIN_LED1 // fake for bluefruit library
#define LED_GREEN PIN_LED1
#define LED_STATE_ON 0 // State when LED is lit
@@ -132,8 +132,6 @@ No longer populated on PCB
#define PIN_SPI_MOSI (0 + 22)
#define PIN_SPI_SCK (0 + 19)
// #define PIN_PWR_EN (0 + 6)
// To debug via the segger JLINK console rather than the CDC-ACM serial device
// #define USE_SEGGER
@@ -141,7 +139,7 @@ No longer populated on PCB
#define HAS_HARDWARE_WATCHDOG
#define HARDWARE_WATCHDOG_DONE (0 + 9)
#define HARDWARE_WATCHDOG_WAKE (0 + 10)
#define HARDWARE_WATCHDOG_TIMEOUT_MS (6*60*1000) // 6 minute watchdog
#define HARDWARE_WATCHDOG_TIMEOUT_MS (6 * 60 * 1000) // 6 minute watchdog
#define BQ4050_SDA_PIN (32 + 1) // I2C data line pin
#define BQ4050_SCL_PIN (32 + 0) // I2C clock line pin

2
variants/nrf52840/monteops_hw1/variant.h
View File

@@ -64,8 +64,6 @@ extern "C" {
// #define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion
#define BUTTON_NEED_PULLUP
#define PIN_BUTTON2 12
#define PIN_BUTTON3 24
#define PIN_BUTTON4 25
/*
* Analog pins

2
variants/nrf52840/nano-g2-ultra/variant.h
View File

@@ -150,8 +150,6 @@ External serial flash W25Q16JV_IQ
#define PIN_SPI_MOSI (0 + 11)
#define PIN_SPI_SCK (0 + 12)
// #define PIN_PWR_EN (0 + 6)
// To debug via the segger JLINK console rather than the CDC-ACM serial device
// #define USE_SEGGER

2
variants/nrf52840/rak2560/variant.h
View File

@@ -60,8 +60,6 @@ extern "C" {
#define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion
#define BUTTON_NEED_PULLUP
#define PIN_BUTTON2 12
#define PIN_BUTTON3 24
#define PIN_BUTTON4 25
/*
* Analog pins

2
variants/nrf52840/rak4631/variant.h
View File

@@ -59,8 +59,6 @@ extern "C" {
#define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion
#define BUTTON_NEED_PULLUP
#define PIN_BUTTON2 12
#define PIN_BUTTON3 24
#define PIN_BUTTON4 25
/*
* Analog pins

2
variants/nrf52840/rak4631_epaper/variant.h
View File

@@ -59,8 +59,6 @@ extern "C" {
#define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion
#define BUTTON_NEED_PULLUP
#define PIN_BUTTON2 12
#define PIN_BUTTON3 24
#define PIN_BUTTON4 25
/*
* Analog pins

2
variants/nrf52840/rak4631_eth_gw/variant.h
View File

@@ -59,8 +59,6 @@ extern "C" {
#define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion
#define BUTTON_NEED_PULLUP
#define PIN_BUTTON2 12
#define PIN_BUTTON3 24
#define PIN_BUTTON4 25
/*
* Analog pins

2
variants/nrf52840/rak4631_nomadstar_meteor_pro/variant.h
View File

@@ -59,8 +59,6 @@ extern "C" {
#define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion
#define BUTTON_NEED_PULLUP
#define PIN_BUTTON2 12
#define PIN_BUTTON3 24
#define PIN_BUTTON4 25
/*
* Analog pins

2
variants/nrf52840/rak_wismeshtag/variant.h
View File

@@ -59,8 +59,6 @@ extern "C" {
#define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion
#define BUTTON_NEED_PULLUP
#define PIN_BUTTON2 12
#define PIN_BUTTON3 24
#define PIN_BUTTON4 25
/*
* Analog pins

2
variants/nrf52840/rak_wismeshtap/variant.h
View File

@@ -59,8 +59,6 @@ extern "C" {
#define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion such as the RAK14014 or RAK14015 TFT modules
#define BUTTON_NEED_PULLUP
#define PIN_BUTTON2 12
#define PIN_BUTTON3 24
#define PIN_BUTTON4 25
/*
* Analog pins

1
variants/nrf52840/t-echo/variant.h
View File

@@ -161,7 +161,6 @@ External serial flash WP25R1635FZUIL0
// Controls power for all peripherals (eink + GPS + LoRa + Sensor)
#define PIN_POWER_EN (0 + 12)
// #define PIN_POWER_EN1 (0 + 13)
#define PIN_SPI1_MISO \
(32 + 7) // FIXME not really needed, but for now the SPI code requires something to be defined, pick an used GPIO