firmware/src/mesh/MeshModule.h

#pragma once

#include "mesh/Channels.h"
#include "mesh/MeshTypes.h"
#include <vector>

#if HAS_SCREEN
#include <OLEDDisplay.h>
#include <OLEDDisplayUi.h>
#endif

#define MESHMODULE_MIN_BROADCAST_DELAY_MS 30 * 1000 // Min. delay after boot before sending first broadcast by any module
#define MESHMODULE_BROADCAST_SPACING_MS 15 * 1000   // Initial spacing between broadcasts of different modules

/** handleReceived return enumeration
 *
 * Use ProcessMessage::CONTINUE to allows other modules to process a message.
 *
 * Use ProcessMessage::STOP to stop further message processing.
 */
enum class ProcessMessage {
    CONTINUE = 0,
    STOP = 1,
};

/**
 * Used by modules to return the result of the AdminMessage handling.
 * If request is handled, then module should return HANDLED,
 * If response is also prepared for the request, then HANDLED_WITH_RESPONSE
 * should be returned.
 */
enum class AdminMessageHandleResult {
    NOT_HANDLED = 0,
    HANDLED = 1,
    HANDLED_WITH_RESPONSE = 2,
};

/*
 * This struct is used by Screen to figure out whether screen frame should be updated.
 */
struct UIFrameEvent {
    // What do we actually want to happen?
    enum Action {
        REDRAW_ONLY,                    // Don't change which frames are show, just redraw, asap
        REGENERATE_FRAMESET,            // Regenerate (change? add? remove?) screen frames, honoring requestFocus()
        REGENERATE_FRAMESET_BACKGROUND, // Regenerate screen frames, Attempt to remain on the same frame throughout
        SWITCH_TO_TEXTMESSAGE           // Jump directly to the Text Message screen
    } action = REDRAW_ONLY;

    // We might want to pass additional data inside this struct at some point
};

/** A baseclass for any mesh "module".
 *
 * A module allows you to add new features to meshtastic device code, without needing to know messaging details.
 *
 * A key concept for this is that your module should use a particular "portnum" for each message type you want to receive
 * and handle.
 *
 * Internally we use modules to implement the core meshtastic text messaging and gps position sharing features.  You
 * can use these classes as examples for how to write your own custom module.  See here: (FIXME)
 */
class MeshModule
{
    static std::vector<MeshModule *> *modules;

  public:
    /** Constructor
     * name is for debugging output
     */
    MeshModule(const char *_name);

    virtual ~MeshModule();

    /** For use only by MeshService
     */
    static void callModules(meshtastic_MeshPacket &mp, RxSource src = RX_SRC_RADIO);

    static std::vector<MeshModule *> GetMeshModulesWithUIFrames(int startIndex);
    static void observeUIEvents(Observer<const UIFrameEvent *> *observer);
    static AdminMessageHandleResult handleAdminMessageForAllModules(const meshtastic_MeshPacket &mp,
                                                                    meshtastic_AdminMessage *request,
                                                                    meshtastic_AdminMessage *response);
#if HAS_SCREEN
    virtual void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y) { return; }
    virtual bool isRequestingFocus();                          // Checked by screen, when regenerating frameset
    virtual bool interceptingKeyboardInput() { return false; } // Can screen use keyboard for nav, or is module handling input?
#endif
  protected:
    const char *name;

    /** Most modules only care about packets that are destined for their node (i.e. broadcasts or has their node as the specific
    recipient) But some plugs might want to 'sniff' packets that are merely being routed (passing through the current node). Those
    modules can set this to true and their handleReceived() will be called for every packet.
    */
    bool isPromiscuous = false;

    /** Also receive a copy of LOCALLY GENERATED messages - most modules should leave
     *  this setting disabled - see issue #877 */
    bool loopbackOk = false;

    /** Most modules only understand decrypted packets.  For modules that also want to see encrypted packets, they should set this
     * flag */
    bool encryptedOk = false;

    /* We allow modules to ignore a request without sending an error if they have a specific reason for it. */
    bool ignoreRequest = false;

    /** If a bound channel name is set, we will only accept received packets that come in on that channel.
     * A special exception (FIXME, not sure if this is a good idea) - packets that arrive on the local interface
     * are allowed on any channel (this lets the local user do anything).
     *
     * We will send responses on the same channel that the request arrived on.
     */
    const char *boundChannel = NULL;

    /**
     * If this module is currently handling a request currentRequest will be preset
     * to the packet with the request.  This is mostly useful for reply handlers.
     *
     * Note: this can be static because we are guaranteed to be processing only one
     * plumodulegin at a time.
     */
    static const meshtastic_MeshPacket *currentRequest;

    // We keep track of the number of modules that send a periodic broadcast to schedule them spaced out over time
    static uint8_t numPeriodicModules;

    // Set the start delay for module that broadcasts periodically
    int32_t setStartDelay();

    /**
     * If your handler wants to send a response, simply set currentReply and it will be sent at the end of response handling.
     */
    meshtastic_MeshPacket *myReply = NULL;

    /**
     * Initialize your module.  This setup function is called once after all hardware and mesh protocol layers have
     * been initialized
     */
    virtual void setup();

    /**
     * @return true if you want to receive the specified portnum
     */
    virtual bool wantPacket(const meshtastic_MeshPacket *p) = 0;

    /** Called to handle a particular incoming message

    @return ProcessMessage::STOP if you've guaranteed you've handled this message and no other handlers should be considered for
    it
    */
    virtual ProcessMessage handleReceived(const meshtastic_MeshPacket &mp) { return ProcessMessage::CONTINUE; }

    /** Called to change a particular incoming message
        This allows the module to change the message before it is passed through the rest of the call-chain.
    */
    virtual void alterReceived(meshtastic_MeshPacket &mp) {}

    /** Messages can be received that have the want_response bit set.  If set, this callback will be invoked
     * so that subclasses can (optionally) send a response back to the original sender.
     *
     * Note: most implementers don't need to override this, instead: If while handling a request you have a reply, just set
     * the protected reply field in this instance.
     * */
    virtual meshtastic_MeshPacket *allocReply();

    /***
     * @return true if you want to be alloced a UI screen frame
     */
    virtual bool wantUIFrame() { return false; }
    virtual Observable<const UIFrameEvent *> *getUIFrameObservable() { return NULL; }

    meshtastic_MeshPacket *allocAckNak(meshtastic_Routing_Error err, NodeNum to, PacketId idFrom, ChannelIndex chIndex,
                                       uint8_t hopLimit = 0);

    /// Send an error response for the specified packet.
    meshtastic_MeshPacket *allocErrorResponse(meshtastic_Routing_Error err, const meshtastic_MeshPacket *p);

    /**
     * @brief An admin message arrived to AdminModule. Module was asked whether it want to handle the request.
     *
     * @param mp The mesh packet arrived.
     * @param request The AdminMessage request extracted from the packet.
     * @param response The prepared response
     * @return AdminMessageHandleResult
     *   HANDLED if message was handled
     *   HANDLED_WITH_RESPONSE if a response is also prepared and to be sent.
     */
    virtual AdminMessageHandleResult handleAdminMessageForModule(const meshtastic_MeshPacket &mp,
                                                                 meshtastic_AdminMessage *request,
                                                                 meshtastic_AdminMessage *response)
    {
        return AdminMessageHandleResult::NOT_HANDLED;
    };

#if HAS_SCREEN
    /** Request that our module's screen frame be focused when Screen::setFrames runs
     * Only considered if Screen::setFrames is triggered via a UIFrameEvent
     *
     * Having this as a separate call, instead of part of the UIFrameEvent, allows the module to delay decision
     * until drawFrame() is called. This required less restructuring.
     */
    bool _requestingFocus = false;
    void requestFocus() { _requestingFocus = true; }
#else
    void requestFocus(){}; // No-op
#endif

  private:
    /**
     * If any of the current chain of modules has already sent a reply, it will be here.  This is useful to allow
     * the RoutingModule to avoid sending redundant acks
     */
    static meshtastic_MeshPacket *currentReply;

    friend class ReliableRouter;

    /** Messages can be received that have the want_response bit set.  If set, this callback will be invoked
     * so that subclasses can (optionally) send a response back to the original sender.  This method calls allocReply()
     * to generate the reply message, and if !NULL that message will be delivered to whoever sent req
     */
    void sendResponse(const meshtastic_MeshPacket &req);
};

/** set the destination and packet parameters of packet p intended as a reply to a particular "to" packet
 * This ensures that if the request packet was sent reliably, the reply is sent that way as well.
 */
void setReplyTo(meshtastic_MeshPacket *p, const meshtastic_MeshPacket &to);