mirror of
https://github.com/meshtastic/firmware.git
synced 2025-12-15 15:22:34 +00:00
fa1a1fd869
* Delete bin/config.d/femtofox/femtofox_EByte-E22-900M30S_Ebyte-E22-900M22S.yaml * Delete bin/config.d/femtofox/femtofox_EByte-E22-900MM22S.yaml * Delete bin/config.d/femtofox/femtofox_Heltec-HT-RA62_Seeed-WIO-SX1262.yaml * Delete bin/config.d/femtofox/femtofox_Waveshare-SX126X-XXXM_AI-Thinker-RA-01SH.yaml * Add files via upload * Update and rename bin/config.d/femtofox_SX1262_XTAL.yaml to bin/config.d/femtofox/femtofox_SX1262_XTAL.yaml * Update and rename bin/config.d/femtofox_LR1121_TCXO.yaml to bin/config.d/femtofox/femtofox_LR1121_TCXO.yaml * Update and rename bin/config.d/femtofox_SX1262_TCXO.yaml to bin/config.d/femtofox/femtofox_SX1262_TCXO.yaml
22 lines
797 B
YAML
22 lines
797 B
YAML
---
|
|
Lora:
|
|
## Ebyte E22-900M30S, E22-900M22S with or without external RF switching setup
|
|
## HT-RA62 (Has internal switching, but whatever)
|
|
## Seeed WIO SX1262 (already has TXEN-DIO2 link, but needs RXEN)
|
|
## Will work with any module with or without RF switching, and with TCXO
|
|
Module: sx1262
|
|
gpiochip: 1 # subtract 32 from the gpio numbers
|
|
DIO2_AS_RF_SWITCH: true
|
|
DIO3_TCXO_VOLTAGE: true
|
|
CS: 16 #pin6 / GPIO48 1C0
|
|
IRQ: 23 #pin17 / GPIO55 1C7
|
|
Busy: 22 #pin16 / GPIO54 1C6
|
|
Reset: 25 #pin13 / GPIO57 1D1
|
|
RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
|
|
# TXen: bridge to DIO2 on E22 module
|
|
spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
|
|
spiSpeed: 2000000
|
|
|
|
General:
|
|
MACAddressSource: eth0
|