#!/usr/bin/env python3
# trunk-ignore-all(ruff/F821)
# trunk-ignore-all(flake8/F821): For SConstruct imports
# trunk-ignore-all(ruff/E402): Hacky esptool import
# trunk-ignore-all(flake8/E402): Hacky esptool import
import sys
from os.path import join

Import("env")
platform = env.PioPlatform()

sys.path.append(join(platform.get_package_dir("tool-esptoolpy")))
# IntelHex workaround, remove after fixed upstream
# https://github.com/platformio/platform-espressif32/issues/1632
try:
    import intelhex
except ImportError:
    env.Execute("$PYTHONEXE -m pip install intelhex")
import esptool


def esp32_create_combined_bin(source, target, env):
    # this sub is borrowed from ESPEasy build toolchain. It's licensed under GPL V3
    # https://github.com/letscontrolit/ESPEasy/blob/mega/tools/pio/post_esp32.py
    print("Generating combined binary for serial flashing")

    app_offset = 0x10000

    new_file_name = env.subst("$BUILD_DIR/${PROGNAME}.factory.bin")
    sections = env.subst(env.get("FLASH_EXTRA_IMAGES"))
    firmware_name = env.subst("$BUILD_DIR/${PROGNAME}.bin")
    chip = env.get("BOARD_MCU")
    board = env.BoardConfig()
    flash_size = board.get("upload.flash_size")
    flash_freq = board.get("build.f_flash", "40m")
    flash_freq = flash_freq.replace("000000L", "m")
    flash_mode = board.get("build.flash_mode", "dio")
    memory_type = board.get("build.arduino.memory_type", "qio_qspi")
    if flash_mode == "qio" or flash_mode == "qout":
        flash_mode = "dio"
    if memory_type == "opi_opi" or memory_type == "opi_qspi":
        flash_mode = "dout"
    cmd = [
        "--chip",
        chip,
        "merge_bin",
        "-o",
        new_file_name,
        "--flash_mode",
        flash_mode,
        "--flash_freq",
        flash_freq,
        "--flash_size",
        flash_size,
    ]

    print("    Offset | File")
    for section in sections:
        sect_adr, sect_file = section.split(" ", 1)
        print(f" -  {sect_adr} | {sect_file}")
        cmd += [sect_adr, sect_file]

    print(f" - {hex(app_offset)} | {firmware_name}")
    cmd += [hex(app_offset), firmware_name]

    print("Using esptool.py arguments: %s" % " ".join(cmd))

    esptool.main(cmd)


env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", esp32_create_combined_bin)

esp32_kind = env.GetProjectOption("custom_esp32_kind")
if esp32_kind == "esp32":
    # Free up some IRAM by removing auxiliary SPI flash chip drivers.
    # Wrapped stub symbols are defined in src/platform/esp32/iram-quirk.c.
    env.Append(
        LINKFLAGS=[
            "-Wl,--wrap=esp_flash_chip_gd",
            "-Wl,--wrap=esp_flash_chip_issi",
            "-Wl,--wrap=esp_flash_chip_winbond",
        ]
    )
else:
    # For newer ESP32 targets, using newlib nano works better.
    env.Append(LINKFLAGS=["--specs=nano.specs", "-u", "_printf_float"])