Don't create potential NodeInfo storm on telemetry reponse from Repeater (#2673)

* Don't create potential NodeInfo storm on telemetry reponse from Repeaters

* Check decoded

.github/ISSUE_TEMPLATE/Bug Report.yml

@@ -37,13 +37,19 @@ body:
         - T-Lora v1
         - T-Lora v1.3
         - T-Lora v2 1.6
+        - T-Deck
         - T-Echo
+        - T-Watch
         - Rak4631
         - Rak11200
+        - Rak11310
         - Heltec v1
         - Heltec v2
         - Heltec v2.1
         - Heltec V3
+        - Heltec Wireless Paper
+        - Heltec Wireless Tracker
+        - Raspberry Pi Pico (W)
         - Relay v1
         - Relay v2
         - DIY

.github/pull_request_template.md

@@ -7,7 +7,8 @@
   is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
 - Please do not check in files that don't have real changes
 - Please do not reformat lines that you didn't have to change the code on
-- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor and the 'clang-format' extension,
-  because automatically follows our indentation rules and it's auto reformatting will not cause spurious changes to lines.
+- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor along with the ['Trunk Check' extension](https://marketplace.visualstudio.com/items?itemName=trunk.io) (WSL2 is required on windows),
+  because it automatically follows our indentation rules and its auto reformatting will not cause spurious changes to lines.
 - If your PR fixes a bug, mention "fixes #bugnum" somewhere in your pull request description.
 - If your other co-developers have comments on your PR please tweak as needed.
+- Please also enable "Allow edits by maintainers".

.github/workflows/build_esp32.yml

@@ -17,11 +17,11 @@ jobs:
         uses: ./.github/actions/setup-base
 
       - name: Pull web ui
-        uses: dsaltares/fetch-gh-release-asset@master
+        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
         with:
-          repo: "meshtastic/web"
-          file: "build.tar"
-          target: "build.tar"
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
           token: ${{ secrets.GITHUB_TOKEN }}
 
       - name: Unpack web ui
@@ -40,11 +40,11 @@ jobs:
         run: bin/build-esp32.sh ${{ inputs.board }}
 
       - name: Pull OTA Firmware
-        uses: dsaltares/fetch-gh-release-asset@master
+        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
         with:
-          repo: "meshtastic/firmware-ota"
-          file: "firmware.bin"
-          target: "release/bleota.bin"
+          repo: meshtastic/firmware-ota
+          file: firmware.bin
+          target: release/bleota.bin
           token: ${{ secrets.GITHUB_TOKEN }}
 
       - name: Get release version string

.github/workflows/build_esp32_s3.yml

@@ -17,11 +17,11 @@ jobs:
         uses: ./.github/actions/setup-base
 
       - name: Pull web ui
-        uses: dsaltares/fetch-gh-release-asset@master
+        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
         with:
-          repo: "meshtastic/web"
-          file: "build.tar"
-          target: "build.tar"
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
           token: ${{ secrets.GITHUB_TOKEN }}
 
       - name: Unpack web ui
@@ -38,11 +38,11 @@ jobs:
         run: bin/build-esp32.sh ${{ inputs.board }}
 
       - name: Pull OTA Firmware
-        uses: dsaltares/fetch-gh-release-asset@master
+        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
         with:
-          repo: "meshtastic/firmware-ota"
-          file: "firmware-s3.bin"
-          target: "release/bleota-s3.bin"
+          repo: meshtastic/firmware-ota
+          file: firmware-s3.bin
+          target: release/bleota-s3.bin
           token: ${{ secrets.GITHUB_TOKEN }}
 
       - name: Get release version string

.github/workflows/main_matrix.yml

@@ -1,4 +1,7 @@
 name: CI
+#concurrency:
+#  group: ${{ github.ref }}
+#  cancel-in-progress: ${{ github.ref != 'refs/heads/master' }}
 on:
   # # Triggers the workflow on push but only for the master branch
   push:
@@ -23,9 +26,9 @@ jobs:
       matrix:
         include:
           - board: rak11200
-          - board: tlora-v2-1-1.6
+          - board: tlora-v2-1-1_6
           - board: tbeam
-          - board: heltec-v2.1
+          - board: heltec-v2_1
           - board: meshtastic-diy-v1
           - board: rak4631
           - board: t-echo
@@ -33,6 +36,9 @@ jobs:
           - board: m5stack-coreink
           - board: tbeam-s3-core
           - board: tlora-t3s3-v1
+          - board: t-watch-s3
+          - board: t-deck
+          #- board: rak11310
 
     runs-on: ubuntu-latest
     steps:
@@ -43,7 +49,7 @@ jobs:
 
       - name: Trunk Check
         if: ${{ github.event_name != 'workflow_dispatch' }}
-        uses: trunk-io/trunk-action@v1
+        uses: trunk-io/trunk-action@782e83f803ca6e369f035d64c6ba2768174ba61b
 
       - name: Check ${{ matrix.board }}
         run: bin/check-all.sh ${{ matrix.board }}
@@ -57,14 +63,15 @@ jobs:
           - board: tlora-v2
           - board: tlora-v1
           - board: tlora_v1_3
-          - board: tlora-v2-1-1.6
-          - board: tlora-v2-1-1.8
+          - board: tlora-v2-1-1_6
+          - board: tlora-v2-1-1_8
           - board: tbeam
           - board: heltec-v1
-          - board: heltec-v2.0
-          - board: heltec-v2.1
-          - board: tbeam0.7
+          - board: heltec-v2_0
+          - board: heltec-v2_1
+          - board: tbeam0_7
           - board: meshtastic-diy-v1
+          - board: hydra
           - board: meshtastic-dr-dev
           - board: nano-g1
           - board: station-g1
@@ -82,8 +89,12 @@ jobs:
         include:
           - board: heltec-v3
           - board: heltec-wsl-v3
+          - board: heltec-wireless-tracker
+          - board: heltec-wireless-paper
           - board: tbeam-s3-core
           - board: tlora-t3s3-v1
+          - board: t-watch-s3
+          - board: t-deck
     uses: ./.github/workflows/build_esp32_s3.yml
     with:
       board: ${{ matrix.board }}
@@ -96,23 +107,26 @@ jobs:
         include:
           - board: rak4631
           - board: rak4631_eink
+          - board: monteops_hw1
           - board: t-echo
           - board: pca10059_diy_eink
           - board: feather_diy
+          - board: nano-g2-ultra
     uses: ./.github/workflows/build_nrf52.yml
     with:
       board: ${{ matrix.board }}
 
-  # build-rpi2040:
-  #   strategy:
-  #     fail-fast: false
-  #     max-parallel: 2
-  #     matrix:
-  #       include:
-  #         - board: pico
-  #   uses: ./.github/workflows/build_rpi2040.yml
-  #   with:
-  #     board: ${{ matrix.board }}
+  build-rpi2040:
+    strategy:
+      fail-fast: false
+      max-parallel: 2
+      matrix:
+        include:
+          - board: pico
+          - board: rak11310
+    uses: ./.github/workflows/build_rpi2040.yml
+    with:
+      board: ${{ matrix.board }}
 
   build-native:
     runs-on: ubuntu-latest
@@ -148,12 +162,14 @@ jobs:
             release/device-*.bat
 
       - name: Docker login
+        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
         uses: docker/login-action@v2
         with:
           username: meshtastic
           password: ${{ secrets.DOCKER_TOKEN }}
 
       - name: Docker setup
+        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
         uses: docker/setup-buildx-action@v2
 
       - name: Docker build and push tagged versions
@@ -166,7 +182,7 @@ jobs:
           tags: meshtastic/device-simulator:${{ steps.version.outputs.version }}
 
       - name: Docker build and push
-        if: github.ref == 'refs/heads/master'
+        if: ${{ github.ref == 'refs/heads/master' && github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
         uses: docker/build-push-action@v3
         with:
           context: .
@@ -186,7 +202,8 @@ jobs:
 
   gather-artifacts:
     runs-on: ubuntu-latest
-    needs: [build-esp32, build-esp32-s3, build-nrf52, build-native] #, build-rpi2040]
+    needs:
+      [build-esp32, build-esp32-s3, build-nrf52, build-native, build-rpi2040]
     steps:
       - name: Checkout code
         uses: actions/checkout@v3
@@ -242,8 +259,9 @@ jobs:
           retention-days: 30
 
       - name: Create request artifacts
+        continue-on-error: true # FIXME: Why are we getting 502, but things still work?
         if: ${{ github.event_name == 'pull_request_target' || github.event_name == 'pull_request' }}
-        uses: gavv/pull-request-artifacts@v1.0.0
+        uses: gavv/pull-request-artifacts@v1.1.0
         with:
           commit: ${{ (github.event.pull_request_target || github.event.pull_request).head.sha }}
           repo-token: ${{ secrets.GITHUB_TOKEN }}
@@ -301,7 +319,7 @@ jobs:
         with:
           draft: true
           prerelease: true
-          release_name: Meshtastic Firmware ${{ steps.version.outputs.version }}
+          release_name: Meshtastic Firmware ${{ steps.version.outputs.version }} Alpha
           tag_name: v${{ steps.version.outputs.version }}
           body: |
             Autogenerated by github action, developer should edit as required before publishing...

.github/workflows/nightly.yml

@@ -14,6 +14,6 @@ jobs:
         uses: actions/checkout@v3
 
       - name: Trunk Check
-        uses: trunk-io/trunk-action@v1
+        uses: trunk-io/trunk-action@782e83f803ca6e369f035d64c6ba2768174ba61b
         with:
           trunk-token: ${{ secrets.TRUNK_TOKEN }}

.gitignore

@@ -30,3 +30,4 @@ __pycache__
 venv/
 release/
 .vscode/extensions.json
+/compile_commands.json

.trunk/.gitignore

@@ -5,3 +5,4 @@
 plugins
 user_trunk.yaml
 user.yaml
+shims

.trunk/trunk.yaml

@@ -1,36 +1,37 @@
 version: 0.1
 cli:
-  version: 1.7.0
+  version: 1.9.1
 plugins:
   sources:
     - id: trunk
-      ref: v0.0.14
+      ref: v0.0.17
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - ruff@0.0.260
-    - yamllint@1.30.0
+    - taplo@0.7.0
+    - ruff@0.0.265
+    - yamllint@1.31.0
     - isort@5.12.0
-    - markdownlint@0.33.0
+    - markdownlint@0.34.0
     - oxipng@8.0.0
     - svgo@3.0.2
-    - actionlint@1.6.23
+    - actionlint@1.6.24
     - flake8@6.0.0
     - hadolint@2.12.0
     - shfmt@3.5.0
     - shellcheck@0.9.0
     - black@23.3.0
     - git-diff-check
-    - gitleaks@8.16.2
+    - gitleaks@8.16.3
     - clang-format@14.0.0
-    - prettier@2.8.7
+    - prettier@2.8.8
   disabled:
     - taplo@0.7.0
     - shellcheck@0.9.0
     - shfmt@3.5.0
     - oxipng@8.0.0
     - actionlint@1.6.22
-    - markdownlint@0.33.0
+    - markdownlint@0.34.0
     - hadolint@2.12.0
     - svgo@3.0.2
 runtimes:

.vscode/settings.json

@@ -1,4 +1,5 @@
 {
   "editor.formatOnSave": true,
-  "editor.defaultFormatter": "trunk.io"
+  "editor.defaultFormatter": "trunk.io",
+  "trunk.enableWindows": true
 }

arch/esp32/esp32.ini

@@ -1,12 +1,15 @@
 ; Common settings for ESP targes, mixin with extends = esp32_base
 [esp32_base]
 extends = arduino_base
-platform = platformio/espressif32@^6.1.0
+platform = platformio/espressif32@^6.3.2
+
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/>
+
 upload_speed = 921600
 debug_init_break = tbreak setup
 monitor_filters = esp32_exception_decoder
+
 board_build.filesystem = littlefs
 
 # Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
@@ -25,6 +28,7 @@ build_flags =
   -DCONFIG_BT_NIMBLE_ENABLED
   -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
   -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
+  -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=5120
   -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
   ;-DDEBUG_HEAP
 
@@ -34,6 +38,7 @@ lib_deps =
   ${environmental_base.lib_deps}
   https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
   h2zero/NimBLE-Arduino@^1.4.0
+  jgromes/RadioLib@^6.1.0
   https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
   https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
 
@@ -51,4 +56,4 @@ lib_ignore =
 
 ; customize the partition table
 ; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
-board_build.partitions = partition-table.csv
+board_build.partitions = partition-table.csv

arch/esp32/esp32c3.ini

@@ -1,44 +1,5 @@
 [esp32c3_base]
-extends = arduino_base
-platform = platformio/espressif32@^6.1.0
-build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/>
-upload_speed = 961200
+extends = esp32_base
+
 monitor_speed = 115200
-debug_init_break = tbreak setup
 monitor_filters = esp32_c3_exception_decoder
-board_build.filesystem = littlefs
-
-# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
-# See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
-# This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
-build_flags =
-  ${arduino_base.build_flags} 
-  -Wall 
-  -Wextra 
-  -Isrc/platform/esp32 
-  -std=c++11 
-  -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG 
-  -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG 
-  -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
-  -DCONFIG_BT_NIMBLE_ENABLED 
-  -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
-  -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
-  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
-  ;-DDEBUG_HEAP
-  
-lib_deps =
-  ${arduino_base.lib_deps}
-  ${networking_base.lib_deps}
-  ${environmental_base.lib_deps}
-  https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
-  h2zero/NimBLE-Arduino@^1.4.0
-  https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
-  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
-lib_ignore = 
-  segger_rtt
-  ESP32 BLE Arduino
-
-; customize the partition table
-; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
-board_build.partitions = partition-table.csv

arch/esp32/esp32s2.ini

@@ -1,47 +1,16 @@
 [esp32s2_base]
-extends = arduino_base
-platform = platformio/espressif32@^6.1.0
+extends = esp32_base
+
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/> -<nimble/>
-upload_speed = 961200
+  ${esp32_base.build_src_filter} -<nimble/>
+
 monitor_speed = 115200
-debug_init_break = tbreak setup
-monitor_filters = esp32_exception_decoder
-board_build.filesystem = littlefs
 
-# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
-# See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
-# This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
 build_flags =
-  ${arduino_base.build_flags} 
-  -Wall 
-  -Wextra 
-  -Isrc/platform/esp32 
-  -std=c++11 
-  -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG 
-  -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG 
-  -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
-  -DAXP_DEBUG_PORT=Serial 
-  -DCONFIG_BT_NIMBLE_ENABLED 
-  -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
-  -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
-  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
+  ${esp32_base.build_flags} 
   -DHAS_BLUETOOTH=0
-  ;-DDEBUG_HEAP
   
-lib_deps =
-  ${arduino_base.lib_deps}
-  ${networking_base.lib_deps}
-  ${environmental_base.lib_deps}
-  https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
-  https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
-  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
-
 lib_ignore = 
-  segger_rtt
-  ESP32 BLE Arduino
-
-; customize the partition table
-; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
-board_build.partitions = partition-table.csv
+  ${esp32_base.lib_ignore} 
+  NimBLE-Arduino
 

arch/esp32/esp32s3.ini

@@ -1,47 +1,5 @@
 [esp32s3_base]
-extends = arduino_base
-platform = platformio/espressif32@^6.1.0
-build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/>
-upload_speed = 961200
+extends = esp32_base
+
 monitor_speed = 115200
-debug_init_break = tbreak setup
-monitor_filters = esp32_exception_decoder
-board_build.filesystem = littlefs
-
-# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
-# See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
-# This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
-build_flags =
-  ${arduino_base.build_flags} 
-  -Wall 
-  -Wextra 
-  -Isrc/platform/esp32 
-  -std=c++11 
-  -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG 
-  -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG 
-  -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
-  -DAXP_DEBUG_PORT=Serial 
-  -DCONFIG_BT_NIMBLE_ENABLED 
-  -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
-  -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
-  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
-  ;-DDEBUG_HEAP
-  
-lib_deps =
-  ${arduino_base.lib_deps}
-  ${networking_base.lib_deps}
-  ${environmental_base.lib_deps}
-  https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
-  h2zero/NimBLE-Arduino@^1.4.0
-  https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
-  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
-
-lib_ignore = 
-  segger_rtt
-  ESP32 BLE Arduino
-
-; customize the partition table
-; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
-board_build.partitions = partition-table.csv
 

arch/nrf52/nrf52.ini

@@ -1,18 +1,19 @@
 [nrf52_base]
 ; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files
-platform = platformio/nordicnrf52@^9.5.0
-
+platform = platformio/nordicnrf52@^10.0.0
 extends = arduino_base
+
 build_type = debug ; I'm debugging with ICE a lot now
 build_flags = 
   ${arduino_base.build_flags} -Wno-unused-variable 
   -Isrc/platform/nrf52
+
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<mqtt/> -<platform/rp2040> -<mesh/eth/>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2040> -<mesh/eth/>
+
+lib_deps=
+  ${arduino_base.lib_deps}
+  jgromes/RadioLib@^6.1.0
+
 lib_ignore =
-  BluetoothOTA
-  
-; Note: By default no lora device is created for this build - it uses a simulated interface
-[env:feather_nrf52832]
-extends = nrf52_base
-board = adafruit_feather_nrf52832  
+  BluetoothOTA

arch/nrf52/nrf52832.ini

@@ -0,0 +1,7 @@
+[nrf52832_base]
+extends = nrf52_base
+
+build_flags = ${nrf52_base.build_flags} 
+
+lib_deps =
+  ${nrf52_base.lib_deps}

arch/nrf52/nrf52840.ini

@@ -1,14 +1,9 @@
 [nrf52840_base]
 extends = nrf52_base
+
 build_flags = ${nrf52_base.build_flags} 
+
 lib_deps =
-  ${arduino_base.lib_deps}
+  ${nrf52_base.lib_deps}
   ${environmental_base.lib_deps}
   https://github.com/Kongduino/Adafruit_nRFCrypto.git#e31a8825ea3300b163a0a3c1ddd5de34e10e1371
-
-; Note: By default no lora device is created for this build - it uses a simulated interface
-[env:nrf52840dk]
-extends = nrf52840_base
-board = nrf52840_dk
-
-

arch/portduino/portduino.ini

@@ -1,7 +1,8 @@
 ; The Portduino based sim environment on top of any host OS, all hardware will be simulated
 [portduino_base]
-platform = https://github.com/meshtastic/platform-native.git#096b3c3e9c5c8e19d4c3b6cd803fffef2a9be4c5
+platform = https://github.com/meshtastic/platform-native.git#489ff929dca0bb768256ba2de45f95815111490f
 framework = arduino
+
 build_src_filter = 
   ${env.build_src_filter} 
   -<platform/esp32/> 
@@ -16,8 +17,14 @@ build_src_filter =
   -<modules/Telemetry/AirQualityTelemetry.cpp>
   -<modules/Telemetry/Sensor>
   +<../variants/portduino>
+
 lib_deps =
   ${env.lib_deps}
   ${networking_base.lib_deps}
   rweather/Crypto@^0.4.0
-build_flags = ${arduino_base.build_flags} -fPIC -Isrc/platform/portduino
+  jgromes/RadioLib@6.1.0
+
+build_flags =
+  ${arduino_base.build_flags}
+  -fPIC
+  -Isrc/platform/portduino

arch/rp2040/rp2040.ini

@@ -1,7 +1,9 @@
 ; Common settings for rp2040 Processor based targets
 [rp2040_base]
-platform = https://github.com/maxgerhardt/platform-raspberrypi.git#9f8c10e50b5acd18e7bfd32638199c655be73a5b
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git#0c33219f53faa035e188925ea1324f472e8b93d2
 extends = arduino_base
+platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#3.2.2
+
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
 build_flags = 
@@ -10,10 +12,13 @@ build_flags =
   -D__PLAT_RP2040__
 #  -D _POSIX_THREADS
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<mqtt/> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/>
+
 lib_ignore =
   BluetoothOTA
+
 lib_deps =
   ${arduino_base.lib_deps}
   ${environmental_base.lib_deps}
-  https://github.com/kokke/tiny-AES-c.git#f06ac37fc31dfdaca2e0d9bec83f90d5663c319b
+  jgromes/RadioLib@^6.1.0
+  https://github.com/kokke/tiny-AES-c.git#f06ac37fc31dfdaca2e0d9bec83f90d5663c319b

arch/stm32/stm32wl5e.ini

@@ -1,18 +1,29 @@
 [stm32wl5e_base]
-platform = platformio/ststm32@^15.4.1
+platform_packages = platformio/framework-arduinoststm32 @ https://github.com/stm32duino/Arduino_Core_STM32.git#6e3f9910d0122e82a6c3438507dfac3d2fd80a39
+platform = ststm32
 board = generic_wl5e
 framework = arduino
+
 build_type = debug
+
 build_flags = 
   ${arduino_base.build_flags}
   -Isrc/platform/stm32wl -g
-  -DHAL_SUBGHZ_MODULE_ENABLED
-#  Arduino/PlatformIO framework-arduinoststm32 package does not presently have SUBGHZSPI support
-#  -DPIN_SPI_MOSI=PINSUBGHZSPIMOSI -DPIN_SPI_MISO=PINSUBGHZSPIMISO -DPIN_SPI_SCK=PINSUBGHZSPISCK
+  -DconfigUSE_CMSIS_RTOS_V2=1
+  -DVECT_TAB_OFFSET=0x08000000
+  
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<mqtt/> -<graphics> -<input> -<buzz> -<modules/Telemetry> -<platform/nrf52> -<platform/portduino> -<platform/rp2040>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/Telemetry> -<platform/nrf52> -<platform/portduino> -<platform/rp2040>
+
+board_upload.offset_address = 0x08000000
+upload_protocol = stlink
+
 lib_deps =
   ${env.lib_deps}
+  jgromes/RadioLib@^6.1.0
   https://github.com/kokke/tiny-AES-c.git#f06ac37fc31dfdaca2e0d9bec83f90d5663c319b
-lib_ignore = 
-  mathertel/OneButton@^2.0.3
+  https://github.com/littlefs-project/littlefs.git#v2.5.1
+  https://github.com/stm32duino/STM32FreeRTOS.git#10.3.1
+
+lib_ignore =
+  https://github.com/mathertel/OneButton#2.1.0

bin/device-install.bat

@@ -32,7 +32,7 @@ IF EXIST %FILENAME% IF x%FILENAME:update=%==x%FILENAME% (
 	%PYTHON% -m esptool --baud 115200 write_flash 0x00 %FILENAME%
     
     @REM Account for S3 board's different OTA partition
-    IF x%FILENAME:s3=%==x%FILENAME% IF x%FILENAME:v3=%==x%FILENAME% (
+    IF x%FILENAME:s3=%==x%FILENAME% IF x%FILENAME:v3=%==x%FILENAME% IF x%FILENAME:t-deck=%==x%FILENAME% IF x%FILENAME:wireless-paper=%==x%FILENAME% IF x%FILENAME:wireless-tracker=%==x%FILENAME% (
         %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota.bin
 	) else (
         %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota-s3.bin

bin/device-install.sh

@@ -50,7 +50,7 @@ if [ -f "${FILENAME}" ] && [ ! -z "${FILENAME##*"update"*}" ]; then
 	"$PYTHON" -m esptool  erase_flash
 	"$PYTHON" -m esptool  write_flash 0x00 ${FILENAME}
 	# Account for S3 board's different OTA partition
-	if [ ! -z "${FILENAME##*"s3"*}" ] && [ ! -z "${FILENAME##*"-v3"*}" ]; then
+	if [ ! -z "${FILENAME##*"s3"*}" ] && [ ! -z "${FILENAME##*"-v3"*}" ] && [ ! -z "${FILENAME##*"t-deck"*}" ] && [ ! -z "${FILENAME##*"wireless-paper"*}" ] && [ ! -z "${FILENAME##*"wireless-tracker"*}" ]; then
 		"$PYTHON" -m esptool  write_flash 0x260000 bleota.bin
 	else
 	    "$PYTHON" -m esptool  write_flash 0x260000 bleota-s3.bin

boards/generic_wl5e.json

@@ -20,7 +20,7 @@
     "maximum_ram_size": 65536,
     "maximum_size": 262144,
     "protocol": "cmsis-dap",
-    "protocols": ["cmsis-dap"]
+    "protocols": ["cmsis-dap", "stlink"]
   },
   "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32wl-series.html",
   "vendor": "ST"

boards/heltec_wireless_tracker.json

@@ -0,0 +1,38 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_8MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DHELTEC_WIRELESS_TRACKER",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "heltec_wireless_tracker"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Heltec Wireless Tracker",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://heltec.org/project/wireless-tracker/",
+  "vendor": "Heltec"
+}

boards/nano-g2-ultra.json

@@ -0,0 +1,51 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "BQ nRF52840",
+    "mcu": "nrf52840",
+    "variant": "nano-g2-ultra",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "BQ nRF52840",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://wiki.uniteng.com/en/meshtastic/nano-g2-ultra",
+  "vendor": "BQ Consulting"
+}

boards/t-deck.json

@@ -0,0 +1,40 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=0"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "dio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "t-deck"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Espressif Systems LilyGO T-Deck (16 MB FLASH, 8 MB PSRAM)",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.lilygo.cc/en-pl/products/t-deck",
+  "vendor": "LilyGO"
+}

boards/t-echo.json

@@ -7,7 +7,10 @@
     "cpu": "cortex-m4",
     "extra_flags": "-DARDUINO_NRF52840_TTGO_EINK -DNRF52840_XXAA",
     "f_cpu": "64000000L",
-    "hwids": [["0x239A", "0x4405"]],
+    "hwids": [
+      ["0x239A", "0x4405"],
+      ["0x239A", "0x002A"]
+    ],
     "usb_product": "TTGO_eink",
     "mcu": "nrf52840",
     "variant": "t-echo",

boards/t-watch-s3.json

@@ -0,0 +1,38 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DT_WATCH_S3",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "dio",
+    "hwids": [["0X303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "t-watch-s3"
+  },
+  "connectivity": ["wifi"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino"],
+  "name": "LilyGo T-Watch 2020 V3",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "require_upload_port": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true
+  },
+  "url": "http://www.lilygo.cn/",
+  "vendor": "LilyGo"
+}

boards/wiscore_rak11300.json

@@ -0,0 +1,40 @@
+{
+  "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x2E8A",
+        "usb_pid": "0x000A"
+      }
+    },
+    "core": "earlephilhower",
+    "cpu": "cortex-m0plus",
+    "extra_flags": "-DARDUINO_GENERIC_RP2040 -DRASPBERRY_PI_PICO -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
+    "f_cpu": "133000000L",
+    "hwids": [
+      ["0x2E8A", "0x00C0"],
+      ["0x2E8A", "0x000A"]
+    ],
+    "mcu": "rp2040",
+    "variant": "WisBlock_RAK11300_Board"
+  },
+  "debug": {
+    "jlink_device": "RP2040_M0_0",
+    "openocd_target": "rp2040.cfg",
+    "svd_path": "rp2040.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "WisBlock RAK11300",
+  "upload": {
+    "maximum_ram_size": 270336,
+    "maximum_size": 2097152,
+    "require_upload_port": true,
+    "native_usb": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": false,
+    "protocol": "picotool",
+    "protocols": ["cmsis-dap", "raspberrypi-swd", "picotool", "picoprobe"]
+  },
+  "url": "https://docs.rakwireless.com/",
+  "vendor": "RAKwireless"
+}

boards/xiao_ble_sense.json

@@ -0,0 +1,57 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_MDBT50Q_RX -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x810B"],
+      ["0x239A", "0x010B"],
+      ["0x239A", "0x810C"]
+    ],
+    "usb_product": "XIAO-BOOT",
+    "mcu": "nrf52840",
+    "variant": "Seeed_XIAO_nRF52840_Sense",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "7.3.0",
+      "sd_fwid": "0x0123"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "Seeed Xiao BLE Sense",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.seeedstudio.com/Seeed-XIAO-BLE-Sense-nRF52840-p-5253.html",
+  "vendor": "Seeed Studio"
+}

platformio.ini

@@ -2,17 +2,18 @@
 ; https://docs.platformio.org/page/projectconf.html
 
 [platformio]
-default_envs = tbeam
+;default_envs = tbeam
 ;default_envs = pico
 ;default_envs = tbeam-s3-core
 ;default_envs = tbeam0.7
 ;default_envs = heltec-v1
-;default_envs = heltec-v2.0
-;default_envs = heltec-v2.1
+;default_envs = heltec-v2_0
+;default_envs = heltec-v2_1
+;default_envs = heltec-wireless-tracker
 ;default_envs = tlora-v1
 ;default_envs = tlora_v1_3
 ;default_envs = tlora-v2
-;default_envs = tlora-v2-1-1.6
+;default_envs = tlora-v2-1-1_6
 ;default_envs = tlora-t3s3-v1
 ;default_envs = lora-relay-v1 # nrf board
 ;default_envs = t-echo
@@ -21,17 +22,18 @@ default_envs = tbeam
 ;default_envs = nano-g1
 ;default_envs = pca10059_diy_eink
 ;default_envs = meshtastic-diy-v1
-;default_envs = meshtastic-diy-v1.1
+;default_envs = meshtastic-diy-v1_1
 ;default_envs = meshtastic-dr-dev
 ;default_envs = m5stack-coreink
 ;default_envs = rak4631
+default_envs = wio-e5
 
 extra_configs =
   arch/*/*.ini
   variants/*/platformio.ini
 
 [env]
-extra_scripts = bin/platformio-custom.py 
+extra_scripts = bin/platformio-custom.py
 
 ; note: we add src to our include search path so that lmic_project_config can override
 ; note: TINYGPS_OPTION_NO_CUSTOM_FIELDS is VERY important.  We don't use custom fields and somewhere in that pile
@@ -39,8 +41,8 @@ extra_scripts = bin/platformio-custom.py
 ; FIXME: fix lib/BluetoothOTA dependency back on src/ so we can remove -Isrc
 ; The Radiolib stuff will speed up building considerably. Exclud all the stuff we dont need.
 build_flags = -Wno-missing-field-initializers
-  -Wno-format 
-  -Isrc -Isrc/mesh -Isrc/mesh/generated -Isrc/gps -Isrc/buzz -Wl,-Map,.pio/build/output.map 
+  -Wno-format
+  -Isrc -Isrc/mesh -Isrc/mesh/generated -Isrc/gps -Isrc/buzz -Wl,-Map,.pio/build/output.map
   -DUSE_THREAD_NAMES
   -DTINYGPS_OPTION_NO_CUSTOM_FIELDS
   -DPB_ENABLE_MALLOC=1
@@ -55,20 +57,23 @@ build_flags = -Wno-missing-field-initializers
   -DRADIOLIB_EXCLUDE_MORSE
   -DRADIOLIB_EXCLUDE_RTTY
   -DRADIOLIB_EXCLUDE_SSTV
+  -DRADIOLIB_EXCLUDE_AX25
+  -DRADIOLIB_EXCLUDE_DIRECT_RECEIVE
+  -DRADIOLIB_EXCLUDE_BELL
+  -DRADIOLIB_EXCLUDE_PAGER
+  -DRADIOLIB_EXCLUDE_FSK4
+  -DRADIOLIB_EXCLUDE_APRS
 
 monitor_speed = 115200
 
 lib_deps =
-  https://github.com/meshtastic/esp8266-oled-ssd1306.git#b38094e03dfa964fbc0e799bc374e91a605c1223 ; ESP8266_SSD1306 
-  mathertel/OneButton@^2.0.3 ; OneButton library for non-blocking button debounce
+  https://github.com/meshtastic/esp8266-oled-ssd1306.git#b38094e03dfa964fbc0e799bc374e91a605c1223 ; ESP8266_SSD1306
+  https://github.com/mathertel/OneButton#2.1.0 ; OneButton library for non-blocking button debounce
   https://github.com/meshtastic/arduino-fsm.git#7db3702bf0cfe97b783d6c72595e3f38e0b19159
   https://github.com/meshtastic/TinyGPSPlus.git#127ad674ef85f0201cb68a065879653ed94792c4
   https://github.com/meshtastic/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3
   nanopb/Nanopb@^0.4.7
   erriez/ErriezCRC32@^1.0.1
-  ; temp: do this till > 5.7.0 release to keep (some) SX1262 and SX1280 working - resolves -705 error during init
-  https://github.com/jgromes/RadioLib.git#45c5859338590b7eede23cb2f95284c3fb0cf08e
-  ; jgromes/RadioLib@^5.7.0
 
 ; Used for the code analysis in PIO Home / Inspect
 check_tool = cppcheck
@@ -90,14 +95,14 @@ lib_deps =
 build_flags = ${env.build_flags} -Os -DRADIOLIB_SPI_PARANOID=0
 build_src_filter = ${env.build_src_filter} -<platform/portduino/>
 
-; Common libs for communicating over TCP/IP networks such as MQTT 
+; Common libs for communicating over TCP/IP networks such as MQTT
 [networking_base]
 lib_deps =
   knolleary/PubSubClient@^2.8
   arduino-libraries/NTPClient@^3.1.0
   arcao/Syslog@^2.0.0
 
-; Common libs for environmental measurements in telemetry module 
+; Common libs for environmental measurements in telemetry module
 ; (not included in native / portduino)
 [environmental_base]
 lib_deps =
@@ -105,7 +110,8 @@ lib_deps =
   adafruit/Adafruit Unified Sensor@^1.1.9
   adafruit/Adafruit BMP280 Library@^2.6.6
   adafruit/Adafruit BME280 Library@^2.2.2
-  https://github.com/meshtastic/BSEC-Arduino-library.git#452f9a7ffa8b53e1debe2c454fe375dfad98b507
+  https://github.com/boschsensortec/Bosch-BSEC2-Library#v1.5.2400
+  boschsensortec/BME68x Sensor Library@^1.1.40407
   adafruit/Adafruit MCP9808 Library@^2.0.0
   adafruit/Adafruit INA260 Library@^1.5.0
   adafruit/Adafruit INA219@^1.2.0
@@ -115,3 +121,4 @@ lib_deps =
   adafruit/Adafruit PM25 AQI Sensor@^1.0.6
   adafruit/Adafruit MPU6050@^2.2.4
   adafruit/Adafruit LIS3DH@^1.2.4
+  https://github.com/lewisxhe/BMA423_Library@^0.0.1

src/AccelerometerThread.h

@@ -6,10 +6,37 @@
 
 #include <Adafruit_LIS3DH.h>
 #include <Adafruit_MPU6050.h>
+#include <Arduino.h>
+#include <Wire.h>
+#include <bma.h>
+
+BMA423 bmaSensor;
+bool BMA_IRQ = false;
 
 #define ACCELEROMETER_CHECK_INTERVAL_MS 100
 #define ACCELEROMETER_CLICK_THRESHOLD 40
 
+uint16_t readRegister(uint8_t address, uint8_t reg, uint8_t *data, uint16_t len)
+{
+    Wire.beginTransmission(address);
+    Wire.write(reg);
+    Wire.endTransmission();
+    Wire.requestFrom((uint8_t)address, (uint8_t)len);
+    uint8_t i = 0;
+    while (Wire.available()) {
+        data[i++] = Wire.read();
+    }
+    return 0; // Pass
+}
+
+uint16_t writeRegister(uint8_t address, uint8_t reg, uint8_t *data, uint16_t len)
+{
+    Wire.beginTransmission(address);
+    Wire.write(reg);
+    Wire.write(data, len);
+    return (0 != Wire.endTransmission());
+}
+
 namespace concurrency
 {
 class AccelerometerThread : public concurrency::OSThread
@@ -29,10 +56,10 @@ class AccelerometerThread : public concurrency::OSThread
             return;
         }
 
-        accleremoter_type = type;
+        acceleremoter_type = type;
         LOG_DEBUG("AccelerometerThread initializing\n");
 
-        if (accleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.begin(accelerometer_found.address)) {
+        if (acceleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.begin(accelerometer_found.address)) {
             LOG_DEBUG("MPU6050 initializing\n");
             // setup motion detection
             mpu.setHighPassFilter(MPU6050_HIGHPASS_0_63_HZ);
@@ -40,11 +67,60 @@ class AccelerometerThread : public concurrency::OSThread
             mpu.setMotionDetectionDuration(20);
             mpu.setInterruptPinLatch(true); // Keep it latched.  Will turn off when reinitialized.
             mpu.setInterruptPinPolarity(true);
-        } else if (accleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.begin(accelerometer_found.address)) {
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.begin(accelerometer_found.address)) {
             LOG_DEBUG("LIS3DH initializing\n");
             lis.setRange(LIS3DH_RANGE_2_G);
-            // Adjust threshhold, higher numbers are less sensitive
+            // Adjust threshold, higher numbers are less sensitive
             lis.setClick(config.device.double_tap_as_button_press ? 2 : 1, ACCELEROMETER_CLICK_THRESHOLD);
+        } else if (acceleremoter_type == ScanI2C::DeviceType::BMA423 && bmaSensor.begin(readRegister, writeRegister, delay)) {
+            LOG_DEBUG("BMA423 initializing\n");
+            Acfg cfg;
+            cfg.odr = BMA4_OUTPUT_DATA_RATE_100HZ;
+            cfg.range = BMA4_ACCEL_RANGE_2G;
+            cfg.bandwidth = BMA4_ACCEL_NORMAL_AVG4;
+            cfg.perf_mode = BMA4_CONTINUOUS_MODE;
+            bmaSensor.setAccelConfig(cfg);
+            bmaSensor.enableAccel();
+
+            struct bma4_int_pin_config pin_config;
+            pin_config.edge_ctrl = BMA4_LEVEL_TRIGGER;
+            pin_config.lvl = BMA4_ACTIVE_HIGH;
+            pin_config.od = BMA4_PUSH_PULL;
+            pin_config.output_en = BMA4_OUTPUT_ENABLE;
+            pin_config.input_en = BMA4_INPUT_DISABLE;
+            // The correct trigger interrupt needs to be configured as needed
+            bmaSensor.setINTPinConfig(pin_config, BMA4_INTR1_MAP);
+
+#ifdef BMA423_INT
+            pinMode(BMA4XX_INT, INPUT);
+            attachInterrupt(
+                BMA4XX_INT,
+                [] {
+                    // Set interrupt to set irq value to true
+                    BMA_IRQ = true;
+                },
+                RISING); // Select the interrupt mode according to the actual circuit
+#endif
+
+            struct bma423_axes_remap remap_data;
+            remap_data.x_axis = 0;
+            remap_data.x_axis_sign = 1;
+            remap_data.y_axis = 1;
+            remap_data.y_axis_sign = 0;
+            remap_data.z_axis = 2;
+            remap_data.z_axis_sign = 1;
+            // Need to raise the wrist function, need to set the correct axis
+            bmaSensor.setRemapAxes(&remap_data);
+            // sensor.enableFeature(BMA423_STEP_CNTR, true);
+            bmaSensor.enableFeature(BMA423_TILT, true);
+            bmaSensor.enableFeature(BMA423_WAKEUP, true);
+            // sensor.resetStepCounter();
+
+            // Turn on feature interrupt
+            bmaSensor.enableStepCountInterrupt();
+            bmaSensor.enableTiltInterrupt();
+            // It corresponds to isDoubleClick interrupt
+            bmaSensor.enableWakeupInterrupt();
         }
     }
 
@@ -53,9 +129,9 @@ class AccelerometerThread : public concurrency::OSThread
     {
         canSleep = true; // Assume we should not keep the board awake
 
-        if (accleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.getMotionInterruptStatus()) {
+        if (acceleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.getMotionInterruptStatus()) {
             wakeScreen();
-        } else if (accleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.getClick() > 0) {
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.getClick() > 0) {
             uint8_t click = lis.getClick();
             if (!config.device.double_tap_as_button_press) {
                 wakeScreen();
@@ -65,7 +141,13 @@ class AccelerometerThread : public concurrency::OSThread
                 buttonPress();
                 return 500;
             }
+        } else if (acceleremoter_type == ScanI2C::DeviceType::BMA423 && bmaSensor.getINT()) {
+            if (bmaSensor.isTilt() || bmaSensor.isDoubleClick()) {
+                wakeScreen();
+                return 500;
+            }
         }
+
         return ACCELEROMETER_CHECK_INTERVAL_MS;
     }
 
@@ -84,9 +166,9 @@ class AccelerometerThread : public concurrency::OSThread
         powerFSM.trigger(EVENT_PRESS);
     }
 
-    ScanI2C::DeviceType accleremoter_type;
+    ScanI2C::DeviceType acceleremoter_type;
     Adafruit_MPU6050 mpu;
     Adafruit_LIS3DH lis;
 };
 
-} // namespace concurrency
+} // namespace concurrency

src/ButtonThread.h

@@ -4,6 +4,7 @@
 #include "concurrency/OSThread.h"
 #include "configuration.h"
 #include "graphics/Screen.h"
+#include "main.h"
 #include "power.h"
 #include <OneButton.h>
 
@@ -51,7 +52,7 @@ class ButtonThread : public concurrency::OSThread
         pinMode(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, INPUT_PULLUP_SENSE);
 #endif
         userButton.attachClick(userButtonPressed);
-        userButton.setClickTicks(300);
+        userButton.setClickMs(300);
         userButton.attachDuringLongPress(userButtonPressedLong);
         userButton.attachDoubleClick(userButtonDoublePressed);
         userButton.attachMultiClick(userButtonMultiPressed);
@@ -98,10 +99,10 @@ class ButtonThread : public concurrency::OSThread
         userButtonTouch.tick();
         canSleep &= userButtonTouch.isIdle();
 #endif
-        // if (!canSleep) LOG_DEBUG("Supressing sleep!\n");
+        // if (!canSleep) LOG_DEBUG("Suppressing sleep!\n");
         // else LOG_DEBUG("sleep ok\n");
 
-        return 5;
+        return 50;
     }
 
   private:
@@ -157,7 +158,7 @@ class ButtonThread : public concurrency::OSThread
         digitalWrite(PIN_EINK_EN, digitalRead(PIN_EINK_EN) == LOW);
 #endif
         screen->print("Sent ad-hoc ping\n");
-        service.refreshMyNodeInfo();
+        service.refreshLocalMeshNode();
         service.sendNetworkPing(NODENUM_BROADCAST, true);
     }
 
@@ -196,4 +197,4 @@ class ButtonThread : public concurrency::OSThread
     }
 };
 
-} // namespace concurrency
+} // namespace concurrency

src/DebugConfiguration.h

@@ -28,6 +28,7 @@
 #define DEBUG_PORT (*console) // Serial debug port
 
 #ifdef USE_SEGGER
+#define DEBUG_PORT
 #define LOG_DEBUG(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #define LOG_INFO(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #define LOG_WARN(...) SEGGER_RTT_printf(0, __VA_ARGS__)

src/FSCommon.cpp

@@ -8,6 +8,8 @@
 #ifdef SDCARD_USE_SPI1
 SPIClass SPI1(HSPI);
 #define SDHandler SPI1
+#else
+#define SDHandler SPI
 #endif
 
 #endif // HAS_SDCARD
@@ -57,7 +59,7 @@ bool renameFile(const char *pathFrom, const char *pathTo)
 #endif
 }
 
-void listDir(const char *dirname, uint8_t levels, boolean del = false)
+void listDir(const char *dirname, uint8_t levels, bool del = false)
 {
 #ifdef FSCom
 #if (defined(ARCH_ESP32) || defined(ARCH_RP2040) || defined(ARCH_PORTDUINO))

src/FSCommon.h

@@ -13,6 +13,13 @@
 #define FILE_O_READ "r"
 #endif
 
+#if defined(ARCH_STM32WL)
+#include "platform/stm32wl/InternalFileSystem.h" // STM32WL version
+#define FSCom InternalFS
+#define FSBegin() FSCom.begin()
+using namespace LittleFS_Namespace;
+#endif
+
 #if defined(ARCH_RP2040)
 // RP2040
 #include "LittleFS.h"
@@ -42,6 +49,6 @@ using namespace Adafruit_LittleFS_Namespace;
 void fsInit();
 bool copyFile(const char *from, const char *to);
 bool renameFile(const char *pathFrom, const char *pathTo);
-void listDir(const char *dirname, uint8_t levels, boolean del);
+void listDir(const char *dirname, uint8_t levels, bool del);
 void rmDir(const char *dirname);
 void setupSDCard();

src/GPSStatus.h

@@ -55,7 +55,7 @@ class GPSStatus : public Status
 #ifdef GPS_EXTRAVERBOSE
             LOG_WARN("Using fixed latitude\n");
 #endif
-            meshtastic_NodeInfo *node = nodeDB.getNode(nodeDB.getNodeNum());
+            meshtastic_NodeInfoLite *node = nodeDB.getMeshNode(nodeDB.getNodeNum());
             return node->position.latitude_i;
         } else {
             return p.latitude_i;
@@ -68,7 +68,7 @@ class GPSStatus : public Status
 #ifdef GPS_EXTRAVERBOSE
             LOG_WARN("Using fixed longitude\n");
 #endif
-            meshtastic_NodeInfo *node = nodeDB.getNode(nodeDB.getNodeNum());
+            meshtastic_NodeInfoLite *node = nodeDB.getMeshNode(nodeDB.getNodeNum());
             return node->position.longitude_i;
         } else {
             return p.longitude_i;
@@ -81,7 +81,7 @@ class GPSStatus : public Status
 #ifdef GPS_EXTRAVERBOSE
             LOG_WARN("Using fixed altitude\n");
 #endif
-            meshtastic_NodeInfo *node = nodeDB.getNode(nodeDB.getNodeNum());
+            meshtastic_NodeInfoLite *node = nodeDB.getMeshNode(nodeDB.getNodeNum());
             return node->position.altitude;
         } else {
             return p.altitude;
@@ -106,7 +106,7 @@ class GPSStatus : public Status
     bool matches(const GPSStatus *newStatus) const
     {
 #ifdef GPS_EXTRAVERBOSE
-        LOG_DEBUG("GPSStatus.match() new pos@%x to old pos@%x\n", newStatus->p.pos_timestamp, p.pos_timestamp);
+        LOG_DEBUG("GPSStatus.match() new pos@%x to old pos@%x\n", newStatus->p.timestamp, p.timestamp);
 #endif
         return (newStatus->hasLock != hasLock || newStatus->isConnected != isConnected ||
                 newStatus->isPowerSaving != isPowerSaving || newStatus->p.latitude_i != p.latitude_i ||
@@ -138,8 +138,9 @@ class GPSStatus : public Status
                 LOG_DEBUG("New GPS pos@%x:3 lat=%f, lon=%f, alt=%d, pdop=%.2f, track=%.2f, speed=%.2f, sats=%d\n", p.timestamp,
                           p.latitude_i * 1e-7, p.longitude_i * 1e-7, p.altitude, p.PDOP * 1e-2, p.ground_track * 1e-5,
                           p.ground_speed * 1e-2, p.sats_in_view);
-            } else
+            } else {
                 LOG_DEBUG("No GPS lock\n");
+            }
             onNewStatus.notifyObservers(this);
         }
         return 0;
@@ -148,4 +149,4 @@ class GPSStatus : public Status
 
 } // namespace meshtastic
 
-extern meshtastic::GPSStatus *gpsStatus;
+extern meshtastic::GPSStatus *gpsStatus;

src/OSTimer.cpp

@@ -5,7 +5,8 @@
  * Schedule a callback to run.  The callback must _not_ block, though it is called from regular thread level (not ISR)
  *
  * NOTE! xTimerPend... seems to ignore the time passed in on ESP32 and on NRF52
- * The reason this didn't work is bcause xTimerPednFunctCall really isn't a timer function at all - it just means run the callback
+ * The reason this didn't work is because xTimerPednFunctCall really isn't a timer function at all - it just means run the
+callback
  * from the timer thread the next time you have spare cycles.
  *
  * @return true if successful, false if the timer fifo is too full.

src/Power.cpp

@@ -17,14 +17,40 @@
 #define DELAY_FOREVER portMAX_DELAY
 #endif
 
+#if defined(BATTERY_PIN) && defined(ARCH_ESP32)
+
+#ifndef BAT_MEASURE_ADC_UNIT // ADC1 is default
+static const adc1_channel_t adc_channel = ADC_CHANNEL;
+static const adc_unit_t unit = ADC_UNIT_1;
+#else // ADC2
+static const adc2_channel_t adc_channel = ADC_CHANNEL;
+static const adc_unit_t unit = ADC_UNIT_2;
+RTC_NOINIT_ATTR uint64_t RTC_reg_b;
+
+#endif // BAT_MEASURE_ADC_UNIT
+
+esp_adc_cal_characteristics_t *adc_characs = (esp_adc_cal_characteristics_t *)calloc(1, sizeof(esp_adc_cal_characteristics_t));
+#ifndef ADC_ATTENUATION
+static const adc_atten_t atten = ADC_ATTEN_DB_11;
+#else
+static const adc_atten_t atten = ADC_ATTENUATION;
+#endif
+#endif // BATTERY_PIN && ARCH_ESP32
+
+#if HAS_TELEMETRY && !defined(ARCH_PORTDUINO)
+INA260Sensor ina260Sensor;
+INA219Sensor ina219Sensor;
+#endif
+
 #ifdef HAS_PMU
 #include "XPowersAXP192.tpp"
 #include "XPowersAXP2101.tpp"
 #include "XPowersLibInterface.hpp"
 XPowersLibInterface *PMU = NULL;
 #else
+
 // Copy of the base class defined in axp20x.h.
-// I'd rather not inlude axp20x.h as it brings Wire dependency.
+// I'd rather not include axp20x.h as it brings Wire dependency.
 class HasBatteryLevel
 {
   public:
@@ -108,6 +134,13 @@ class AnalogBatteryLevel : public HasBatteryLevel
     virtual uint16_t getBattVoltage() override
     {
 
+#if defined(HAS_TELEMETRY) && !defined(ARCH_PORTDUINO) && !defined(HAS_PMU)
+        if (hasINA()) {
+            LOG_DEBUG("Using INA on I2C addr 0x%x for device battery voltage\n", config.power.device_battery_ina_address);
+            return getINAVoltage();
+        }
+#endif
+
 #ifndef ADC_MULTIPLIER
 #define ADC_MULTIPLIER 2.0
 #endif
@@ -128,18 +161,41 @@ class AnalogBatteryLevel : public HasBatteryLevel
             // Set the number of samples, it has an effect of increasing sensitivity, especially in complex electromagnetic
             // environment.
             uint32_t raw = 0;
+#ifdef ARCH_ESP32
+#ifndef BAT_MEASURE_ADC_UNIT // ADC1
+            for (int i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
+                raw += adc1_get_raw(adc_channel);
+            }
+#else  // ADC2
+            int32_t adc_buf = 0;
+            for (int i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
+                // ADC2 wifi bug workaround, see
+                // https://github.com/espressif/arduino-esp32/issues/102
+                WRITE_PERI_REG(SENS_SAR_READ_CTRL2_REG, RTC_reg_b);
+                SET_PERI_REG_MASK(SENS_SAR_READ_CTRL2_REG, SENS_SAR2_DATA_INV);
+                adc2_get_raw(adc_channel, ADC_WIDTH_BIT_12, &adc_buf);
+                raw += adc_buf;
+            }
+#endif // BAT_MEASURE_ADC_UNIT
+#else  // !ARCH_ESP32
             for (uint32_t i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
                 raw += analogRead(BATTERY_PIN);
             }
+#endif
             raw = raw / BATTERY_SENSE_SAMPLES;
-
             float scaled;
+#ifdef ARCH_ESP32
+            scaled = esp_adc_cal_raw_to_voltage(raw, adc_characs);
+            scaled *= operativeAdcMultiplier;
+#else
 #ifndef VBAT_RAW_TO_SCALED
             scaled = 1000.0 * operativeAdcMultiplier * (AREF_VOLTAGE / 1024.0) * raw;
 #else
             scaled = VBAT_RAW_TO_SCALED(raw); // defined in variant.h
-#endif
-            // LOG_DEBUG("battery gpio %d raw val=%u scaled=%u\n", BATTERY_PIN, raw, (uint32_t)(scaled));
+#endif // VBAT RAW TO SCALED
+#endif // ARCH_ESP32
+       // LOG_DEBUG("battery gpio %d raw val=%u scaled=%u\n", BATTERY_PIN, raw, (uint32_t)(scaled));
+
             last_read_value = scaled;
             return scaled;
         } else {
@@ -147,7 +203,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
         }
 #else
         return 0;
-#endif
+#endif // BATTERY_PIN
     }
 
     /**
@@ -203,6 +259,35 @@ class AnalogBatteryLevel : public HasBatteryLevel
     const float fullVolt = BAT_FULLVOLT, emptyVolt = BAT_EMPTYVOLT, chargingVolt = BAT_CHARGINGVOLT, noBatVolt = BAT_NOBATVOLT;
     float last_read_value = 0.0;
     uint32_t last_read_time_ms = 0;
+
+#if defined(HAS_TELEMETRY) && !defined(ARCH_PORTDUINO)
+    uint16_t getINAVoltage()
+    {
+        if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA219] == config.power.device_battery_ina_address) {
+            return ina219Sensor.getBusVoltageMv();
+        } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA260] == config.power.device_battery_ina_address) {
+            return ina260Sensor.getBusVoltageMv();
+        }
+        return 0;
+    }
+
+    bool hasINA()
+    {
+        if (!config.power.device_battery_ina_address) {
+            return false;
+        }
+        if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA219] == config.power.device_battery_ina_address) {
+            if (!ina219Sensor.isInitialized())
+                return ina219Sensor.runOnce() > 0;
+            return ina219Sensor.isRunning();
+        } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA260] == config.power.device_battery_ina_address) {
+            if (!ina260Sensor.isInitialized())
+                return ina260Sensor.runOnce() > 0;
+            return ina260Sensor.isRunning();
+        }
+        return false;
+    }
+#endif
 };
 
 AnalogBatteryLevel analogLevel;
@@ -228,25 +313,52 @@ bool Power::analogInit()
     // disable any internal pullups
     pinMode(BATTERY_PIN, INPUT);
 
-#ifdef ARCH_ESP32
-    // ESP32 needs special analog stuff
-    adcAttachPin(BATTERY_PIN);
+#ifndef BATTERY_SENSE_RESOLUTION_BITS
+#define BATTERY_SENSE_RESOLUTION_BITS 10
 #endif
+
+#ifdef ARCH_ESP32 // ESP32 needs special analog stuff
+
+#ifndef ADC_WIDTH // max resolution by default
+    static const adc_bits_width_t width = ADC_WIDTH_BIT_12;
+#else
+    static const adc_bits_width_t width = ADC_WIDTH;
+#endif
+#ifndef BAT_MEASURE_ADC_UNIT // ADC1
+    adc1_config_width(width);
+    adc1_config_channel_atten(adc_channel, atten);
+#else // ADC2
+    adc2_config_channel_atten(adc_channel, atten);
+    // ADC2 wifi bug workaround
+    RTC_reg_b = READ_PERI_REG(SENS_SAR_READ_CTRL2_REG);
+#endif
+    // calibrate ADC
+    esp_adc_cal_value_t val_type = esp_adc_cal_characterize(unit, atten, width, DEFAULT_VREF, adc_characs);
+    // show ADC characterization base
+    if (val_type == ESP_ADC_CAL_VAL_EFUSE_TP) {
+        LOG_INFO("ADCmod: ADC characterization based on Two Point values stored in eFuse\n");
+    } else if (val_type == ESP_ADC_CAL_VAL_EFUSE_VREF) {
+        LOG_INFO("ADCmod: ADC characterization based on reference voltage stored in eFuse\n");
+    } else {
+        LOG_INFO("ADCmod: ADC characterization based on default reference voltage\n");
+    }
+#if defined(HELTEC_V3) || defined(HELTEC_WSL_V3)
+    pinMode(37, OUTPUT); // needed for P channel mosfet to work
+    digitalWrite(37, LOW);
+#endif
+#endif // ARCH_ESP32
+
 #ifdef ARCH_NRF52
 #ifdef VBAT_AR_INTERNAL
     analogReference(VBAT_AR_INTERNAL);
 #else
     analogReference(AR_INTERNAL); // 3.6V
 #endif
-#endif
-
-#ifndef BATTERY_SENSE_RESOLUTION_BITS
-#define BATTERY_SENSE_RESOLUTION_BITS 10
-#endif
-
-    // adcStart(BATTERY_PIN);
     analogReadResolution(BATTERY_SENSE_RESOLUTION_BITS); // Default of 12 is not very linear. Recommended to use 10 or 11
                                                          // depending on needed resolution.
+
+#endif // ARCH_NRF52
+
     batteryLevel = &analogLevel;
     return true;
 #else
@@ -302,7 +414,7 @@ void Power::readPowerStatus()
 {
     if (batteryLevel) {
         bool hasBattery = batteryLevel->isBatteryConnect();
-        int batteryVoltageMv = 0;
+        uint32_t batteryVoltageMv = 0;
         int8_t batteryChargePercent = 0;
         if (hasBattery) {
             batteryVoltageMv = batteryLevel->getBattVoltage();
@@ -365,8 +477,8 @@ void Power::readPowerStatus()
 
 #endif
 
-        // If we have a battery at all and it is less than 10% full, force deep sleep if we have more than 10 low readings in a
-        // row
+        // If we have a battery at all and it is less than 10% full, force deep sleep if we have more than 10 low readings in
+        // a row
         if (powerStatus2.getHasBattery() && !powerStatus2.getHasUSB()) {
             if (batteryLevel->getBattVoltage() < MIN_BAT_MILLIVOLTS) {
                 low_voltage_counter++;
@@ -428,10 +540,12 @@ int32_t Power::runOnce()
             LOG_DEBUG("Battery removed\n");
         }
         */
+#ifndef T_WATCH_S3 // FIXME - why is this triggering on the T-Watch S3?
         if (PMU->isPekeyLongPressIrq()) {
             LOG_DEBUG("PEK long button press\n");
             screen->setOn(false);
         }
+#endif
 
         PMU->clearIrqStatus();
     }
@@ -444,10 +558,10 @@ int32_t Power::runOnce()
  * Init the power manager chip
  *
  * axp192 power
-    DCDC1 0.7-3.5V @ 1200mA max -> OLED // If you turn this off you'll lose comms to the axp192 because the OLED and the axp192
- share the same i2c bus, instead use ssd1306 sleep mode DCDC2 -> unused DCDC3 0.7-3.5V @ 700mA max -> ESP32 (keep this on!) LDO1
- 30mA -> charges GPS backup battery // charges the tiny J13 battery by the GPS to power the GPS ram (for a couple of days), can
- not be turned off LDO2 200mA -> LORA LDO3 200mA -> GPS
+    DCDC1 0.7-3.5V @ 1200mA max -> OLED // If you turn this off you'll lose comms to the axp192 because the OLED and the
+ axp192 share the same i2c bus, instead use ssd1306 sleep mode DCDC2 -> unused DCDC3 0.7-3.5V @ 700mA max -> ESP32 (keep this
+ on!) LDO1 30mA -> charges GPS backup battery // charges the tiny J13 battery by the GPS to power the GPS ram (for a couple of
+ days), can not be turned off LDO2 200mA -> LORA LDO3 200mA -> GPS
  *
  */
 bool Power::axpChipInit()
@@ -540,82 +654,88 @@ bool Power::axpChipInit()
     } else if (PMU->getChipModel() == XPOWERS_AXP2101) {
 
         /*The alternative version of T-Beam 1.1 differs from T-Beam V1.1 in that it uses an AXP2101 power chip*/
-#if (HW_VENDOR == meshtastic_HardwareModel_TBEAM)
-        // Unuse power channel
-        PMU->disablePowerOutput(XPOWERS_DCDC2);
-        PMU->disablePowerOutput(XPOWERS_DCDC3);
-        PMU->disablePowerOutput(XPOWERS_DCDC4);
-        PMU->disablePowerOutput(XPOWERS_DCDC5);
-        PMU->disablePowerOutput(XPOWERS_ALDO1);
-        PMU->disablePowerOutput(XPOWERS_ALDO4);
-        PMU->disablePowerOutput(XPOWERS_BLDO1);
-        PMU->disablePowerOutput(XPOWERS_BLDO2);
-        PMU->disablePowerOutput(XPOWERS_DLDO1);
-        PMU->disablePowerOutput(XPOWERS_DLDO2);
+        if (HW_VENDOR == meshtastic_HardwareModel_TBEAM) {
+            // Unuse power channel
+            PMU->disablePowerOutput(XPOWERS_DCDC2);
+            PMU->disablePowerOutput(XPOWERS_DCDC3);
+            PMU->disablePowerOutput(XPOWERS_DCDC4);
+            PMU->disablePowerOutput(XPOWERS_DCDC5);
+            PMU->disablePowerOutput(XPOWERS_ALDO1);
+            PMU->disablePowerOutput(XPOWERS_ALDO4);
+            PMU->disablePowerOutput(XPOWERS_BLDO1);
+            PMU->disablePowerOutput(XPOWERS_BLDO2);
+            PMU->disablePowerOutput(XPOWERS_DLDO1);
+            PMU->disablePowerOutput(XPOWERS_DLDO2);
 
-        // GNSS RTC PowerVDD 3300mV
-        PMU->setPowerChannelVoltage(XPOWERS_VBACKUP, 3300);
-        PMU->enablePowerOutput(XPOWERS_VBACKUP);
+            // GNSS RTC PowerVDD 3300mV
+            PMU->setPowerChannelVoltage(XPOWERS_VBACKUP, 3300);
+            PMU->enablePowerOutput(XPOWERS_VBACKUP);
 
-        // ESP32 VDD 3300mV
-        //  ! No need to set, automatically open , Don't close it
-        //  PMU->setPowerChannelVoltage(XPOWERS_DCDC1, 3300);
-        //  PMU->setProtectedChannel(XPOWERS_DCDC1);
+            // ESP32 VDD 3300mV
+            //  ! No need to set, automatically open , Don't close it
+            //  PMU->setPowerChannelVoltage(XPOWERS_DCDC1, 3300);
+            //  PMU->setProtectedChannel(XPOWERS_DCDC1);
 
-        // LoRa VDD 3300mV
-        PMU->setPowerChannelVoltage(XPOWERS_ALDO2, 3300);
-        PMU->enablePowerOutput(XPOWERS_ALDO2);
+            // LoRa VDD 3300mV
+            PMU->setPowerChannelVoltage(XPOWERS_ALDO2, 3300);
+            PMU->enablePowerOutput(XPOWERS_ALDO2);
 
-        // GNSS VDD 3300mV
-        PMU->setPowerChannelVoltage(XPOWERS_ALDO3, 3300);
-        PMU->enablePowerOutput(XPOWERS_ALDO3);
+            // GNSS VDD 3300mV
+            PMU->setPowerChannelVoltage(XPOWERS_ALDO3, 3300);
+            PMU->enablePowerOutput(XPOWERS_ALDO3);
+        } else if (HW_VENDOR == meshtastic_HardwareModel_LILYGO_TBEAM_S3_CORE ||
+                   HW_VENDOR == meshtastic_HardwareModel_T_WATCH_S3) {
+            // t-beam s3 core
+            /**
+             * gnss module power channel
+             * The default ALDO4 is off, you need to turn on the GNSS power first, otherwise it will be invalid during
+             * initialization
+             */
+            PMU->setPowerChannelVoltage(XPOWERS_ALDO4, 3300);
+            PMU->enablePowerOutput(XPOWERS_ALDO4);
 
-#elif (HW_VENDOR == meshtastic_HardwareModel_LILYGO_TBEAM_S3_CORE)
-        // t-beam s3 core
-        /**
-         * gnss module power channel
-         * The default ALDO4 is off, you need to turn on the GNSS power first, otherwise it will be invalid during initialization
-         */
-        PMU->setPowerChannelVoltage(XPOWERS_ALDO4, 3300);
-        PMU->enablePowerOutput(XPOWERS_ALDO4);
+            // lora radio power channel
+            PMU->setPowerChannelVoltage(XPOWERS_ALDO3, 3300);
+            PMU->enablePowerOutput(XPOWERS_ALDO3);
 
-        // lora radio power channel
-        PMU->setPowerChannelVoltage(XPOWERS_ALDO3, 3300);
-        PMU->enablePowerOutput(XPOWERS_ALDO3);
+            // m.2 interface
+            PMU->setPowerChannelVoltage(XPOWERS_DCDC3, 3300);
+            PMU->enablePowerOutput(XPOWERS_DCDC3);
 
-        // m.2 interface
-        PMU->setPowerChannelVoltage(XPOWERS_DCDC3, 3300);
-        PMU->enablePowerOutput(XPOWERS_DCDC3);
+            /**
+             * ALDO2 cannot be turned off.
+             * It is a necessary condition for sensor communication.
+             * It must be turned on to properly access the sensor and screen
+             * It is also responsible for the power supply of PCF8563
+             */
+            PMU->setPowerChannelVoltage(XPOWERS_ALDO2, 3300);
+            PMU->enablePowerOutput(XPOWERS_ALDO2);
 
-        /**
-         * ALDO2 cannot be turned off.
-         * It is a necessary condition for sensor communication.
-         * It must be turned on to properly access the sensor and screen
-         * It is also responsible for the power supply of PCF8563
-         */
-        PMU->setPowerChannelVoltage(XPOWERS_ALDO2, 3300);
-        PMU->enablePowerOutput(XPOWERS_ALDO2);
+            // 6-axis , magnetometer ,bme280 , oled screen power channel
+            PMU->setPowerChannelVoltage(XPOWERS_ALDO1, 3300);
+            PMU->enablePowerOutput(XPOWERS_ALDO1);
 
-        // 6-axis , magnetometer ,bme280 , oled screen power channel
-        PMU->setPowerChannelVoltage(XPOWERS_ALDO1, 3300);
-        PMU->enablePowerOutput(XPOWERS_ALDO1);
-
-        // sdcard power channle
-        PMU->setPowerChannelVoltage(XPOWERS_BLDO1, 3300);
-        PMU->enablePowerOutput(XPOWERS_BLDO1);
-
-        // PMU->setPowerChannelVoltage(XPOWERS_DCDC4, 3300);
-        // PMU->enablePowerOutput(XPOWERS_DCDC4);
-
-        // not use channel
-        PMU->disablePowerOutput(XPOWERS_DCDC2); // not elicited
-        PMU->disablePowerOutput(XPOWERS_DCDC5); // not elicited
-        PMU->disablePowerOutput(XPOWERS_DLDO1); // Invalid power channel, it does not exist
-        PMU->disablePowerOutput(XPOWERS_DLDO2); // Invalid power channel, it does not exist
-        PMU->disablePowerOutput(XPOWERS_VBACKUP);
+            // sdcard power channel
+            PMU->setPowerChannelVoltage(XPOWERS_BLDO1, 3300);
+            PMU->enablePowerOutput(XPOWERS_BLDO1);
 
+#ifdef T_WATCH_S3
+            // DRV2605 power channel
+            PMU->setPowerChannelVoltage(XPOWERS_BLDO2, 3300);
+            PMU->enablePowerOutput(XPOWERS_BLDO2);
 #endif
 
+            // PMU->setPowerChannelVoltage(XPOWERS_DCDC4, 3300);
+            // PMU->enablePowerOutput(XPOWERS_DCDC4);
+
+            // not use channel
+            PMU->disablePowerOutput(XPOWERS_DCDC2); // not elicited
+            PMU->disablePowerOutput(XPOWERS_DCDC5); // not elicited
+            PMU->disablePowerOutput(XPOWERS_DLDO1); // Invalid power channel, it does not exist
+            PMU->disablePowerOutput(XPOWERS_DLDO2); // Invalid power channel, it does not exist
+            PMU->disablePowerOutput(XPOWERS_VBACKUP);
+        }
+
         // disable all axp chip interrupt
         PMU->disableIRQ(XPOWERS_AXP2101_ALL_IRQ);
 

src/PowerFSM.cpp

@@ -35,7 +35,7 @@ static bool isPowered()
 
 static void sdsEnter()
 {
-    LOG_INFO("Enter state: SDS\n");
+    LOG_DEBUG("Enter state: SDS\n");
     // FIXME - make sure GPS and LORA radio are off first - because we want close to zero current draw
     doDeepSleep(getConfiguredOrDefaultMs(config.power.sds_secs));
 }
@@ -44,7 +44,7 @@ extern Power *power;
 
 static void shutdownEnter()
 {
-    LOG_INFO("Enter state: SHUTDOWN\n");
+    LOG_DEBUG("Enter state: SHUTDOWN\n");
     power->shutdown();
 }
 
@@ -135,7 +135,7 @@ static void lsExit()
 
 static void nbEnter()
 {
-    LOG_INFO("Enter state: NB\n");
+    LOG_DEBUG("Enter state: NB\n");
     screen->setOn(false);
     setBluetoothEnable(false);
 
@@ -150,7 +150,7 @@ static void darkEnter()
 
 static void serialEnter()
 {
-    LOG_INFO("Enter state: SERIAL\n");
+    LOG_DEBUG("Enter state: SERIAL\n");
     setBluetoothEnable(false);
     screen->setOn(true);
     screen->print("Serial connected\n");
@@ -163,7 +163,7 @@ static void serialExit()
 
 static void powerEnter()
 {
-    LOG_INFO("Enter state: POWER\n");
+    LOG_DEBUG("Enter state: POWER\n");
     if (!isPowered()) {
         // If we got here, we are in the wrong state - we should be in powered, let that state ahndle things
         LOG_INFO("Loss of power in Powered\n");
@@ -198,7 +198,7 @@ static void powerExit()
 
 static void onEnter()
 {
-    LOG_INFO("Enter state: ON\n");
+    LOG_DEBUG("Enter state: ON\n");
     screen->setOn(true);
     setBluetoothEnable(true);
 }
@@ -218,7 +218,7 @@ static void screenPress()
 
 static void bootEnter()
 {
-    LOG_INFO("Enter state: BOOT\n");
+    LOG_DEBUG("Enter state: BOOT\n");
 }
 
 State stateSHUTDOWN(shutdownEnter, NULL, NULL, "SHUTDOWN");
@@ -352,5 +352,5 @@ void PowerFSM_setup()
                                       "mesh timeout");
 #endif
 
-    powerFSM.run_machine(); // run one interation of the state machine, so we run our on enter tasks for the initial DARK state
+    powerFSM.run_machine(); // run one iteration of the state machine, so we run our on enter tasks for the initial DARK state
 }

src/RedirectablePrint.cpp

@@ -62,6 +62,9 @@ size_t RedirectablePrint::vprintf(const char *format, va_list arg)
 
 size_t RedirectablePrint::log(const char *logLevel, const char *format, ...)
 {
+    if (moduleConfig.serial.override_console_serial_port && strcmp(logLevel, "DEBUG") == 0) {
+        return 0;
+    }
     size_t r = 0;
 
     if (!inDebugPrint) {

src/SerialConsole.cpp

@@ -31,7 +31,7 @@ SerialConsole::SerialConsole() : StreamAPI(&Port), RedirectablePrint(&Port), con
                       // setDestination(&noopPrint); for testing, try turning off 'all' debug output and see what leaks
 
     Port.begin(SERIAL_BAUD);
-#if defined(ARCH_NRF52) || defined(CONFIG_IDF_TARGET_ESP32S2) || defined(CONFIG_IDF_TARGET_ESP32S3)
+#if defined(ARCH_NRF52) || defined(CONFIG_IDF_TARGET_ESP32S2) || defined(CONFIG_IDF_TARGET_ESP32S3) || defined(ARCH_RP2040)
     time_t timeout = millis();
     while (!Port) {
         if ((millis() - timeout) < 5000) {

src/airtime.cpp

@@ -6,20 +6,22 @@ AirTime *airTime = NULL;
 
 // Don't read out of this directly. Use the helper functions.
 
+uint32_t air_period_tx[PERIODS_TO_LOG];
+uint32_t air_period_rx[PERIODS_TO_LOG];
+
 void AirTime::logAirtime(reportTypes reportType, uint32_t airtime_ms)
 {
 
     if (reportType == TX_LOG) {
         LOG_DEBUG("AirTime - Packet transmitted : %ums\n", airtime_ms);
         this->airtimes.periodTX[0] = this->airtimes.periodTX[0] + airtime_ms;
-        myNodeInfo.air_period_tx[0] = myNodeInfo.air_period_tx[0] + airtime_ms;
+        air_period_tx[0] = air_period_tx[0] + airtime_ms;
 
         this->utilizationTX[this->getPeriodUtilHour()] = this->utilizationTX[this->getPeriodUtilHour()] + airtime_ms;
-
     } else if (reportType == RX_LOG) {
         LOG_DEBUG("AirTime - Packet received : %ums\n", airtime_ms);
         this->airtimes.periodRX[0] = this->airtimes.periodRX[0] + airtime_ms;
-        myNodeInfo.air_period_rx[0] = myNodeInfo.air_period_rx[0] + airtime_ms;
+        air_period_rx[0] = air_period_rx[0] + airtime_ms;
     } else if (reportType == RX_ALL_LOG) {
         LOG_DEBUG("AirTime - Packet received (noise?) : %ums\n", airtime_ms);
         this->airtimes.periodRX_ALL[0] = this->airtimes.periodRX_ALL[0] + airtime_ms;
@@ -55,16 +57,16 @@ void AirTime::airtimeRotatePeriod()
             this->airtimes.periodRX[i + 1] = this->airtimes.periodRX[i];
             this->airtimes.periodRX_ALL[i + 1] = this->airtimes.periodRX_ALL[i];
 
-            myNodeInfo.air_period_tx[i + 1] = this->airtimes.periodTX[i];
-            myNodeInfo.air_period_rx[i + 1] = this->airtimes.periodRX[i];
+            air_period_tx[i + 1] = this->airtimes.periodTX[i];
+            air_period_rx[i + 1] = this->airtimes.periodRX[i];
         }
 
         this->airtimes.periodTX[0] = 0;
         this->airtimes.periodRX[0] = 0;
         this->airtimes.periodRX_ALL[0] = 0;
 
-        myNodeInfo.air_period_tx[0] = 0;
-        myNodeInfo.air_period_rx[0] = 0;
+        air_period_tx[0] = 0;
+        air_period_rx[0] = 0;
 
         this->airtimes.lastPeriodIndex = this->currentPeriodIndex();
     }
@@ -179,18 +181,17 @@ int32_t AirTime::runOnce()
         }
 
         // Init airtime windows to all 0
-        for (int i = 0; i < myNodeInfo.air_period_rx_count; i++) {
+        for (int i = 0; i < PERIODS_TO_LOG; i++) {
             this->airtimes.periodTX[i] = 0;
             this->airtimes.periodRX[i] = 0;
             this->airtimes.periodRX_ALL[i] = 0;
 
-            // myNodeInfo.air_period_tx[i] = 0;
-            // myNodeInfo.air_period_rx[i] = 0;
+            // air_period_tx[i] = 0;
+            // air_period_rx[i] = 0;
         }
 
         firstTime = false;
         lastUtilPeriod = utilPeriod;
-
     } else {
         this->airtimeRotatePeriod();
 
@@ -206,12 +207,6 @@ int32_t AirTime::runOnce()
 
             this->utilizationTX[utilPeriodTX] = 0;
         }
-
-        // Update channel_utilization every second.
-        myNodeInfo.channel_utilization = airTime->channelUtilizationPercent();
-
-        // Update channel_utilization every second.
-        myNodeInfo.air_util_tx = airTime->utilizationTXPercent();
     }
     /*
         LOG_DEBUG("utilPeriodTX %d TX Airtime %3.2f%\n", utilPeriodTX, airTime->utilizationTXPercent());
@@ -223,4 +218,4 @@ int32_t AirTime::runOnce()
         LOG_DEBUG("\n");
     */
     return (1000 * 1);
-}
+}

src/airtime.h

@@ -17,9 +17,9 @@
 
   Example analytics:
 
-  TX_LOG + RX_LOG = Total air time for a perticular meshtastic channel.
+  TX_LOG + RX_LOG = Total air time for a particular meshtastic channel.
 
-  TX_LOG + RX_LOG = Total air time for a perticular meshtastic channel, including
+  TX_LOG + RX_LOG = Total air time for a particular meshtastic channel, including
                     other lora radios.
 
   RX_ALL_LOG - RX_LOG = Other lora radios on our frequency channel.

src/commands.h

@@ -15,4 +15,6 @@ enum class Cmd {
     PRINT,
     START_SHUTDOWN_SCREEN,
     START_REBOOT_SCREEN,
+    SHOW_PREV_FRAME,
+    SHOW_NEXT_FRAME
 };

src/concurrency/InterruptableDelay.h

@@ -18,7 +18,7 @@ namespace concurrency
  *
  * Useful for they top level loop() delay call to keep the CPU powered down until our next scheduled event or some external event.
  *
- * This is implmented for FreeRTOS but should be easy to port to other operating systems.
+ * This is implemented for FreeRTOS but should be easy to port to other operating systems.
  */
 class InterruptableDelay
 {

src/concurrency/NotifiedWorkerThread.cpp

@@ -31,12 +31,14 @@ IRAM_ATTR bool NotifiedWorkerThread::notifyCommon(uint32_t v, bool overwrite)
         runASAP = true;
 
         notification = v;
-        if (debugNotification)
+        if (debugNotification) {
             LOG_DEBUG("setting notification %d\n", v);
+        }
         return true;
     } else {
-        if (debugNotification)
+        if (debugNotification) {
             LOG_DEBUG("dropping notification %d\n", v);
+        }
         return false;
     }
 }
@@ -64,8 +66,9 @@ bool NotifiedWorkerThread::notifyLater(uint32_t delay, uint32_t v, bool overwrit
 
     if (didIt) {                   // If we didn't already have something queued, override the delay to be larger
         setIntervalFromNow(delay); // a new version of setInterval relative to the current time
-        if (debugNotification)
+        if (debugNotification) {
             LOG_DEBUG("delaying notification %u\n", delay);
+        }
     }
 
     return didIt;

src/concurrency/OSThread.cpp

@@ -61,14 +61,17 @@ bool OSThread::shouldRun(unsigned long time)
 {
     bool r = Thread::shouldRun(time);
 
-    if (showRun && r)
+    if (showRun && r) {
         LOG_DEBUG("Thread %s: run\n", ThreadName.c_str());
+    }
 
-    if (showWaiting && enabled && !r)
+    if (showWaiting && enabled && !r) {
         LOG_DEBUG("Thread %s: wait %lu\n", ThreadName.c_str(), interval);
+    }
 
-    if (showDisabled && !enabled)
+    if (showDisabled && !enabled) {
         LOG_DEBUG("Thread %s: disabled\n", ThreadName.c_str());
+    }
 
     return r;
 }

src/configuration.h

@@ -98,8 +98,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // Define if screen should be mirrored left to right
 // #define SCREEN_MIRROR
 
-// The m5stack I2C Keyboard (also RAK14004)
+// I2C Keyboards (M5Stack, RAK14004, T-Deck)
 #define CARDKB_ADDR 0x5F
+#define TDECK_KB_ADDR 0x55
 
 // -----------------------------------------------------------------------------
 // SENSOR
@@ -123,6 +124,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // -----------------------------------------------------------------------------
 #define MPU6050_ADDR 0x68
 #define LIS3DH_ADR 0x18
+#define BMA423_ADDR 0x19
+
+// -----------------------------------------------------------------------------
+// LED
+// -----------------------------------------------------------------------------
+#define NCP5623_ADDR 0x38
 
 // -----------------------------------------------------------------------------
 // Security
@@ -167,6 +174,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef HAS_BUTTON
 #define HAS_BUTTON 0
 #endif
+#ifndef HAS_TRACKBALL
+#define HAS_TRACKBALL 0
+#endif
+#ifndef HAS_TOUCHSCREEN
+#define HAS_TOUCHSCREEN 0
+#endif
 #ifndef HAS_TELEMETRY
 #define HAS_TELEMETRY 0
 #endif
@@ -188,4 +201,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #ifndef HW_VENDOR
 #error HW_VENDOR must be defined
-#endif
+#endif

src/detect/ScanI2C.cpp

@@ -30,14 +30,14 @@ ScanI2C::FoundDevice ScanI2C::firstRTC() const
 
 ScanI2C::FoundDevice ScanI2C::firstKeyboard() const
 {
-    ScanI2C::DeviceType types[] = {CARDKB, RAK14004};
-    return firstOfOrNONE(2, types);
+    ScanI2C::DeviceType types[] = {CARDKB, TDECKKB, RAK14004};
+    return firstOfOrNONE(3, types);
 }
 
 ScanI2C::FoundDevice ScanI2C::firstAccelerometer() const
 {
-    ScanI2C::DeviceType types[] = {MPU6050, LIS3DH};
-    return firstOfOrNONE(2, types);
+    ScanI2C::DeviceType types[] = {MPU6050, LIS3DH, BMA423};
+    return firstOfOrNONE(3, types);
 }
 
 ScanI2C::FoundDevice ScanI2C::find(ScanI2C::DeviceType) const
@@ -73,4 +73,4 @@ bool ScanI2C::DeviceAddress::operator<(const ScanI2C::DeviceAddress &other) cons
         || (port != NO_I2C && other.port != NO_I2C && (address < other.address));
 }
 
-ScanI2C::FoundDevice::FoundDevice(ScanI2C::DeviceType type, ScanI2C::DeviceAddress address) : type(type), address(address) {}
+ScanI2C::FoundDevice::FoundDevice(ScanI2C::DeviceType type, ScanI2C::DeviceAddress address) : type(type), address(address) {}

src/detect/ScanI2C.h

@@ -16,6 +16,7 @@ class ScanI2C
         RTC_RV3028,
         RTC_PCF8563,
         CARDKB,
+        TDECKKB,
         RAK14004,
         PMU_AXP192_AXP2101,
         BME_680,
@@ -33,6 +34,10 @@ class ScanI2C
         PMSA0031,
         MPU6050,
         LIS3DH,
+        BMA423,
+#ifdef HAS_NCP5623
+        NCP5623,
+#endif
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;
@@ -94,4 +99,4 @@ class ScanI2C
 
   private:
     bool shouldSuppressScreen = false;
-};
+};

src/detect/ScanI2CTwoWire.cpp

@@ -212,8 +212,11 @@ void ScanI2CTwoWire::scanPort(I2CPort port)
                 }
                 break;
 
-                SCAN_SIMPLE_CASE(ST7567_ADDRESS, SCREEN_ST7567, "st7567 display found\n")
-
+                SCAN_SIMPLE_CASE(TDECK_KB_ADDR, TDECKKB, "T-Deck keyboard found\n");
+                SCAN_SIMPLE_CASE(ST7567_ADDRESS, SCREEN_ST7567, "st7567 display found\n");
+#ifdef HAS_NCP5623
+                SCAN_SIMPLE_CASE(NCP5623_ADDR, NCP5623, "NCP5623 RGB LED found\n");
+#endif
 #ifdef HAS_PMU
                 SCAN_SIMPLE_CASE(XPOWERS_AXP192_AXP2101_ADDRESS, PMU_AXP192_AXP2101, "axp192/axp2101 PMU found\n")
 #endif
@@ -272,6 +275,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port)
 
                 SCAN_SIMPLE_CASE(PMSA0031_ADDR, PMSA0031, "PMSA0031 air quality sensor found\n")
                 SCAN_SIMPLE_CASE(MPU6050_ADDR, MPU6050, "MPU6050 accelerometer found\n");
+                SCAN_SIMPLE_CASE(BMA423_ADDR, BMA423, "BMA423 accelerometer found\n");
 
             default:
                 LOG_INFO("Device found at address 0x%x was not able to be enumerated\n", addr.address);
@@ -290,7 +294,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port)
 
 TwoWire *ScanI2CTwoWire::fetchI2CBus(ScanI2C::DeviceAddress address) const
 {
-    if (address.port == ScanI2C::I2CPort::WIRE1) {
+    if (address.port == ScanI2C::I2CPort::WIRE) {
         return &Wire;
     } else {
 #ifdef I2C_SDA1
@@ -304,4 +308,4 @@ TwoWire *ScanI2CTwoWire::fetchI2CBus(ScanI2C::DeviceAddress address) const
 size_t ScanI2CTwoWire::countDevices() const
 {
     return foundDevices.size();
-}
+}

src/detect/einkScan.h

@@ -1,6 +1,6 @@
 #include "../configuration.h"
 
-#ifdef RAK4630
+#ifdef RAK_4631
 #include "../main.h"
 #include <SPI.h>
 
@@ -64,4 +64,4 @@ void scanEInkDevice(void)
         LOG_DEBUG("EInk display not found\n");
     SPI1.end();
 }
-#endif
+#endif

src/error.h

@@ -9,4 +9,4 @@
 
 /// Record an error that should be reported via analytics
 void recordCriticalError(meshtastic_CriticalErrorCode code = meshtastic_CriticalErrorCode_UNSPECIFIED, uint32_t address = 0,
-                         const char *filename = NULL);
+                         const char *filename = NULL);

src/freertosinc.h

@@ -12,7 +12,7 @@
 #include <freertos/task.h>
 #endif
 
-#if defined(ARDUINO_NRF52_ADAFRUIT)
+#if defined(ARDUINO_NRF52_ADAFRUIT) || defined(ARDUINO_ARCH_STM32) || defined(ARDUINO_ARCH_RP2040)
 #define HAS_FREE_RTOS
 
 #include <FreeRTOS.h>
@@ -44,4 +44,4 @@ typedef uint32_t BaseType_t;
 
 enum eNotifyAction { eNoAction, eSetValueWithoutOverwrite, eSetValueWithOverwrite };
 
-#endif
+#endif

src/gps/GPS.cpp

@@ -4,6 +4,10 @@
 #include "configuration.h"
 #include "sleep.h"
 
+#ifndef GPS_RESET_MODE
+#define GPS_RESET_MODE HIGH
+#endif
+
 // If we have a serial GPS port it will not be null
 #ifdef GPS_SERIAL_NUM
 HardwareSerial _serial_gps_real(GPS_SERIAL_NUM);
@@ -21,11 +25,29 @@ GPS *gps;
 /// only init that port once.
 static bool didSerialInit;
 
-bool GPS::getACK(uint8_t c, uint8_t i)
+struct uBloxGnssModelInfo info;
+uint8_t uBloxProtocolVersion;
+
+void GPS::UBXChecksum(byte *message, size_t length)
+{
+    uint8_t CK_A = 0, CK_B = 0;
+
+    // Calculate the checksum, starting from the CLASS field (which is message[2])
+    for (size_t i = 2; i < length - 2; i++) {
+        CK_A = (CK_A + message[i]) & 0xFF;
+        CK_B = (CK_B + CK_A) & 0xFF;
+    }
+
+    // Place the calculated checksum values in the message
+    message[length - 2] = CK_A;
+    message[length - 1] = CK_B;
+}
+
+bool GPS::getACK(uint8_t class_id, uint8_t msg_id)
 {
     uint8_t b;
     uint8_t ack = 0;
-    const uint8_t ackP[2] = {c, i};
+    const uint8_t ackP[2] = {class_id, msg_id};
     uint8_t buf[10] = {0xB5, 0x62, 0x05, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00};
     unsigned long startTime = millis();
 
@@ -42,17 +64,23 @@ bool GPS::getACK(uint8_t c, uint8_t i)
 
     while (1) {
         if (ack > 9) {
-            return true;
+            // LOG_INFO("Got ACK for class %02X message %02X\n", class_id, msg_id);
+            return true; // ACK received
         }
-        if (millis() - startTime > 1000) {
-            return false;
+        if (millis() - startTime > 3000) {
+            LOG_WARN("No response for class %02X message %02X\n", class_id, msg_id);
+            return false; // No response received within 3 seconds
         }
         if (_serial_gps->available()) {
             b = _serial_gps->read();
             if (b == buf[ack]) {
                 ack++;
             } else {
-                ack = 0;
+                ack = 0;              // Reset the acknowledgement counter
+                if (buf[3] == 0x00) { // UBX-ACK-NAK message
+                    LOG_WARN("Got NAK for class %02X message %02X\n", class_id, msg_id);
+                    return false; // NAK received
+                }
             }
         }
     }
@@ -73,7 +101,7 @@ int GPS::getAck(uint8_t *buffer, uint16_t size, uint8_t requestedClass, uint8_t
     uint32_t startTime = millis();
     uint16_t needRead;
 
-    while (millis() - startTime < 800) {
+    while (millis() - startTime < 1200) {
         while (_serial_gps->available()) {
             int c = _serial_gps->read();
             switch (ubxFrameCounter) {
@@ -108,12 +136,12 @@ int GPS::getAck(uint8_t *buffer, uint16_t size, uint8_t requestedClass, uint8_t
                 }
                 break;
             case 4:
-                // Payload lenght lsb
+                // Payload length lsb
                 needRead = c;
                 ubxFrameCounter++;
                 break;
             case 5:
-                // Payload lenght msb
+                // Payload length msb
                 needRead |= (c << 8);
                 ubxFrameCounter++;
                 break;
@@ -126,7 +154,7 @@ int GPS::getAck(uint8_t *buffer, uint16_t size, uint8_t requestedClass, uint8_t
                 if (_serial_gps->readBytes(buffer, needRead) != needRead) {
                     ubxFrameCounter = 0;
                 } else {
-                    // return payload lenght
+                    // return payload length
                     return needRead;
                 }
                 break;
@@ -160,10 +188,14 @@ bool GPS::setupGPS()
             config.position.tx_gpio = GPS_TX_PIN;
 #endif
 
+//#define BAUD_RATE 115200
 // ESP32 has a special set of parameters vs other arduino ports
 #if defined(ARCH_ESP32)
-        if (config.position.rx_gpio)
+        if (config.position.rx_gpio) {
+            LOG_DEBUG("Using GPIO%d for GPS RX\n", config.position.rx_gpio);
+            LOG_DEBUG("Using GPIO%d for GPS TX\n", config.position.tx_gpio);
             _serial_gps->begin(GPS_BAUDRATE, SERIAL_8N1, config.position.rx_gpio, config.position.tx_gpio);
+        }
 #else
         _serial_gps->begin(GPS_BAUDRATE);
 #endif
@@ -190,8 +222,131 @@ bool GPS::setupGPS()
             // Switch to Vehicle Mode, since SoftRF enables Aviation < 2g
             _serial_gps->write("$PCAS11,3*1E\r\n");
             delay(250);
+        } else if (gnssModel == GNSS_MODEL_UC6850) {
+
+            // use GPS + GLONASS
+            _serial_gps->write("$CFGSYS,h15\r\n");
+            delay(250);
         } else if (gnssModel == GNSS_MODEL_UBLOX) {
 
+            // Configure GNSS system to GPS+SBAS+GLONASS (Module may restart after this command)
+            // We need set it because by default it is GPS only, and we want to use GLONASS too
+            // Also we need SBAS for better accuracy and extra features
+            // ToDo: Dynamic configure GNSS systems depending of LoRa region
+            byte _message_GNSS[36] = {
+                0xb5, 0x62, // Sync message for UBX protocol
+                0x06, 0x3e, // Message class and ID (UBX-CFG-GNSS)
+                0x1c, 0x00, // Length of payload (28 bytes)
+                0x00,       // msgVer (0 for this version)
+                0x00,       // numTrkChHw (max number of hardware channels, read only, so it's always 0)
+                0xff,       // numTrkChUse (max number of channels to use, 0xff = max available)
+                0x03,       // numConfigBlocks (number of GNSS systems), most modules support maximum 3 GNSS systems
+                // GNSS config format: gnssId, resTrkCh, maxTrkCh, reserved1, flags
+                0x00, 0x08, 0x10, 0x00, 0x01, 0x00, 0x01, 0x01, // GPS
+                0x01, 0x01, 0x03, 0x00, 0x01, 0x00, 0x01, 0x01, // SBAS
+                0x06, 0x08, 0x0e, 0x00, 0x01, 0x00, 0x01, 0x01, // GLONASS
+                0x00, 0x00                                      // Checksum (to be calculated below)
+            };
+
+            // Calculate the checksum and update the message.
+            UBXChecksum(_message_GNSS, sizeof(_message_GNSS));
+
+            // Send the message to the module
+            _serial_gps->write(_message_GNSS, sizeof(_message_GNSS));
+
+            if (!getACK(0x06, 0x3e)) {
+                // It's not critical if the module doesn't acknowledge this configuration.
+                // The module should operate adequately with its factory or previously saved settings.
+                // It appears that there is a firmware bug in some GPS modules: When an attempt is made
+                // to overwrite a saved state with identical values, no ACK/NAK is received, contrary to
+                // what is specified in the Ublox documentation.
+                // There is also a possibility that the module may be GPS-only.
+                LOG_INFO("Unable to reconfigure GNSS - defaults maintained. Is this module GPS-only?\n");
+                return true;
+            } else {
+                LOG_INFO("GNSS configured for GPS+SBAS+GLONASS. Pause for 0.75s before sending next command.\n");
+                // Documentation say, we need wait atleast 0.5s after reconfiguration of GNSS module, before sending next commands
+                delay(750);
+                return true;
+            }
+
+            // Enable interference resistance, because we are using LoRa, WiFi and Bluetooth on same board,
+            // and we need to reduce interference from them
+            byte _message_JAM[16] = {
+                0xB5, 0x62, // UBX protocol sync characters
+                0x06, 0x39, // Message class and ID (UBX-CFG-ITFM)
+                0x08, 0x00, // Length of payload (8 bytes)
+                // bbThreshold (Broadband jamming detection threshold) is set to 0x3F (63 in decimal)
+                // cwThreshold (CW jamming detection threshold) is set to 0x10 (16 in decimal)
+                // algorithmBits (Reserved algorithm settings) is set to 0x16B156 as recommended
+                // enable (Enable interference detection) is set to 1 (enabled)
+                0x3F, 0x10, 0xB1, 0x56, // config: Interference config word
+                // generalBits (General settings) is set to 0x31E as recommended
+                // antSetting (Antenna setting, 0=unknown, 1=passive, 2=active) is set to 0 (unknown)
+                // ToDo: Set to 1 (passive) or 2 (active) if known, for example from UBX-MON-HW, or from board info
+                // enable2 (Set to 1 to scan auxiliary bands, u-blox 8 / u-blox M8 only, otherwise ignored) is set to 1
+                // (enabled)
+                0x1E, 0x03, 0x00, 0x01, // config2: Extra settings for jamming/interference monitor
+                0x00, 0x00              // Checksum (calculated below)
+            };
+
+            // Calculate the checksum and update the message.
+            UBXChecksum(_message_JAM, sizeof(_message_JAM));
+
+            // Send the message to the module
+            _serial_gps->write(_message_JAM, sizeof(_message_JAM));
+
+            if (!getACK(0x06, 0x39)) {
+                LOG_WARN("Unable to enable interference resistance.\n");
+                return true;
+            }
+
+            // Configure navigation engine expert settings:
+            byte _message_NAVX5[48] = {
+                0xb5, 0x62, // UBX protocol sync characters
+                0x06, 0x23, // Message class and ID (UBX-CFG-NAVX5)
+                0x28, 0x00, // Length of payload (40 bytes)
+                0x00, 0x00, // msgVer (0 for this version)
+                // minMax flag = 1: apply min/max SVs settings
+                // minCno flag = 1: apply minimum C/N0 setting
+                // initial3dfix flag = 0: apply initial 3D fix settings
+                // aop flag = 1: apply aopCfg (useAOP flag) settings (AssistNow Autonomous)
+                0x1B, 0x00, // mask1 (First parameters bitmask)
+                // adr flag = 0: apply ADR sensor fusion on/off setting (useAdr flag)
+                // If firmware is not ADR/UDR, enabling this flag will fail configuration
+                // ToDo: check this with UBX-MON-VER
+                0x00, 0x00, 0x00, 0x00, // mask2 (Second parameters bitmask)
+                0x00, 0x00,             // Reserved
+                0x03,                   // minSVs (Minimum number of satellites for navigation) = 3
+                0x10,                   // maxSVs (Maximum number of satellites for navigation) = 16
+                0x06,                   // minCNO (Minimum satellite signal level for navigation) = 6 dBHz
+                0x00,                   // Reserved
+                0x00,                   // iniFix3D (Initial fix must be 3D) = 0 (disabled)
+                0x00, 0x00,             // Reserved
+                0x00,                   // ackAiding (Issue acknowledgements for assistance message input) = 0 (disabled)
+                0x00, 0x00,             // Reserved
+                0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Reserved
+                0x00,                               // Reserved
+                0x01,                               // aopCfg (AssistNow Autonomous configuration) = 1 (enabled)
+                0x00, 0x00,                         // Reserved
+                0x00, 0x00,                         // Reserved
+                0x00, 0x00, 0x00, 0x00,             // Reserved
+                0x00, 0x00, 0x00,                   // Reserved
+                0x01,                               // useAdr (Enable/disable ADR sensor fusion) = 1 (enabled)
+                0x00, 0x00                          // Checksum (calculated below)
+            };
+
+            // Calculate the checksum and update the message.
+            UBXChecksum(_message_NAVX5, sizeof(_message_NAVX5));
+
+            // Send the message to the module
+            _serial_gps->write(_message_NAVX5, sizeof(_message_NAVX5));
+
+            if (!getACK(0x06, 0x23)) {
+                LOG_WARN("Unable to configure extra settings.\n");
+                return true;
+            }
+
             /*
                 tips: NMEA Only should not be set here, otherwise initializing Ublox gnss module again after
                 setting will not output command messages in UART1, resulting in unrecognized module information
@@ -208,57 +363,205 @@ bool GPS::setupGPS()
 
             // ublox-M10S can be compatible with UBLOX traditional protocol, so the following sentence settings are also valid
 
-            // disable GGL
-            byte _message_GGL[] = {0xB5, 0x62, 0x06, 0x01, 0x08, 0x00, 0xF0, 0x01,
-                                   0x01, 0x00, 0x01, 0x01, 0x01, 0x01, 0x05, 0x3A};
+            // Set GPS update rate to 1Hz
+            // Lowering the update rate helps to save power.
+            // Additionally, for some new modules like the M9/M10, an update rate lower than 5Hz
+            // is recommended to avoid a known issue with satellites disappearing.
+            byte _message_1Hz[] = {
+                0xB5, 0x62, // UBX protocol sync characters
+                0x06, 0x08, // Message class and ID (UBX-CFG-RATE)
+                0x06, 0x00, // Length of payload (6 bytes)
+                0xE8, 0x03, // Measurement Rate (1000ms for 1Hz)
+                0x01, 0x00, // Navigation rate, always 1 in GPS mode
+                0x01, 0x00, // Time reference
+                0x00, 0x00  // Placeholder for checksum, will be calculated next
+            };
+
+            // Calculate the checksum and update the message.
+            UBXChecksum(_message_1Hz, sizeof(_message_1Hz));
+
+            // Send the message to the module
+            _serial_gps->write(_message_1Hz, sizeof(_message_1Hz));
+
+            if (!getACK(0x06, 0x08)) {
+                LOG_WARN("Unable to set GPS update rate.\n");
+                return true;
+            }
+
+            // Disable GGL. GGL - Geographic position (latitude and longitude), which provides the current geographical
+            // coordinates.
+            byte _message_GGL[] = {
+                0xB5, 0x62,             // UBX sync characters
+                0x06, 0x01,             // Message class and ID (UBX-CFG-MSG)
+                0x08, 0x00,             // Length of payload (8 bytes)
+                0xF0, 0x01,             // NMEA ID for GLL
+                0x01,                   // I/O Target 0=I/O, 1=UART1, 2=UART2, 3=USB, 4=SPI
+                0x00,                   // Disable
+                0x01, 0x01, 0x01, 0x01, // Reserved
+                0x00, 0x00              // CK_A and CK_B (Checksum)
+            };
+
+            // Calculate the checksum and update the message.
+            UBXChecksum(_message_GGL, sizeof(_message_GGL));
+
+            // Send the message to the module
             _serial_gps->write(_message_GGL, sizeof(_message_GGL));
+
             if (!getACK(0x06, 0x01)) {
                 LOG_WARN("Unable to disable NMEA GGL.\n");
                 return true;
             }
 
-            // disable GSA
-            byte _message_GSA[] = {0xB5, 0x62, 0x06, 0x01, 0x08, 0x00, 0xF0, 0x02,
-                                   0x01, 0x00, 0x01, 0x01, 0x01, 0x01, 0x06, 0x41};
+            // Enable GSA. GSA - GPS DOP and active satellites, used for detailing the satellites used in the positioning and
+            // the DOP (Dilution of Precision)
+            byte _message_GSA[] = {
+                0xB5, 0x62,             // UBX sync characters
+                0x06, 0x01,             // Message class and ID (UBX-CFG-MSG)
+                0x08, 0x00,             // Length of payload (8 bytes)
+                0xF0, 0x02,             // NMEA ID for GSA
+                0x01,                   // I/O Target 0=I/O, 1=UART1, 2=UART2, 3=USB, 4=SPI
+                0x01,                   // Enable
+                0x01, 0x01, 0x01, 0x01, // Reserved
+                0x00, 0x00              // CK_A and CK_B (Checksum)
+            };
+            UBXChecksum(_message_GSA, sizeof(_message_GSA));
             _serial_gps->write(_message_GSA, sizeof(_message_GSA));
             if (!getACK(0x06, 0x01)) {
-                LOG_WARN("Unable to disable NMEA GSA.\n");
+                LOG_WARN("Unable to Enable NMEA GSA.\n");
                 return true;
             }
 
-            // disable GSV
-            byte _message_GSV[] = {0xB5, 0x62, 0x06, 0x01, 0x08, 0x00, 0xF0, 0x03,
-                                   0x01, 0x00, 0x01, 0x01, 0x01, 0x01, 0x07, 0x48};
+            // Disable GSV. GSV - Satellites in view, details the number and location of satellites in view.
+            byte _message_GSV[] = {
+                0xB5, 0x62,             // UBX sync characters
+                0x06, 0x01,             // Message class and ID (UBX-CFG-MSG)
+                0x08, 0x00,             // Length of payload (8 bytes)
+                0xF0, 0x03,             // NMEA ID for GSV
+                0x01,                   // I/O Target 0=I/O, 1=UART1, 2=UART2, 3=USB, 4=SPI
+                0x00,                   // Disable
+                0x01, 0x01, 0x01, 0x01, // Reserved
+                0x00, 0x00              // CK_A and CK_B (Checksum)
+            };
+            UBXChecksum(_message_GSV, sizeof(_message_GSV));
             _serial_gps->write(_message_GSV, sizeof(_message_GSV));
             if (!getACK(0x06, 0x01)) {
                 LOG_WARN("Unable to disable NMEA GSV.\n");
                 return true;
             }
 
-            // disable VTG
-            byte _message_VTG[] = {0xB5, 0x62, 0x06, 0x01, 0x08, 0x00, 0xF0, 0x05,
-                                   0x01, 0x00, 0x01, 0x01, 0x01, 0x01, 0x09, 0x56};
+            // Disable VTG. VTG - Track made good and ground speed, which provides course and speed information relative to
+            // the ground.
+            byte _message_VTG[] = {
+                0xB5, 0x62,             // UBX sync characters
+                0x06, 0x01,             // Message class and ID (UBX-CFG-MSG)
+                0x08, 0x00,             // Length of payload (8 bytes)
+                0xF0, 0x05,             // NMEA ID for VTG
+                0x01,                   // I/O Target 0=I/O, 1=UART1, 2=UART2, 3=USB, 4=SPI
+                0x00,                   // Disable
+                0x01, 0x01, 0x01, 0x01, // Reserved
+                0x00, 0x00              // CK_A and CK_B (Checksum)
+            };
+            UBXChecksum(_message_VTG, sizeof(_message_VTG));
             _serial_gps->write(_message_VTG, sizeof(_message_VTG));
             if (!getACK(0x06, 0x01)) {
                 LOG_WARN("Unable to disable NMEA VTG.\n");
                 return true;
             }
 
-            // enable RMC
-            byte _message_RMC[] = {0xB5, 0x62, 0x06, 0x01, 0x08, 0x00, 0xF0, 0x04,
-                                   0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x09, 0x54};
+            // Enable RMC. RMC - Recommended Minimum data, the essential gps pvt (position, velocity, time) data.
+            byte _message_RMC[] = {
+                0xB5, 0x62,             // UBX sync characters
+                0x06, 0x01,             // Message class and ID (UBX-CFG-MSG)
+                0x08, 0x00,             // Length of payload (8 bytes)
+                0xF0, 0x04,             // NMEA ID for RMC
+                0x01,                   // I/O Target 0=I/O, 1=UART1, 2=UART2, 3=USB, 4=SPI
+                0x01,                   // Enable
+                0x01, 0x01, 0x01, 0x01, // Reserved
+                0x00, 0x00              // CK_A and CK_B (Checksum)
+            };
+            UBXChecksum(_message_RMC, sizeof(_message_RMC));
             _serial_gps->write(_message_RMC, sizeof(_message_RMC));
             if (!getACK(0x06, 0x01)) {
                 LOG_WARN("Unable to enable NMEA RMC.\n");
                 return true;
             }
 
-            // enable GGA
-            byte _message_GGA[] = {0xB5, 0x62, 0x06, 0x01, 0x08, 0x00, 0xF0, 0x00,
-                                   0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x05, 0x38};
+            // Enable GGA. GGA - Global Positioning System Fix Data, which provides 3D location and accuracy data.
+            byte _message_GGA[] = {
+                0xB5, 0x62,             // UBX sync characters
+                0x06, 0x01,             // Message class and ID (UBX-CFG-MSG)
+                0x08, 0x00,             // Length of payload (8 bytes)
+                0xF0, 0x00,             // NMEA ID for GGA
+                0x01,                   // I/O Target 0=I/O, 1=UART1, 2=UART2, 3=USB, 4=SPI
+                0x01,                   // Enable
+                0x01, 0x01, 0x01, 0x01, // Reserved
+                0x00, 0x00              // CK_A and CK_B (Checksum)
+            };
+            UBXChecksum(_message_GGA, sizeof(_message_GGA));
             _serial_gps->write(_message_GGA, sizeof(_message_GGA));
             if (!getACK(0x06, 0x01)) {
                 LOG_WARN("Unable to enable NMEA GGA.\n");
+                return true;
+            }
+
+            // The Power Management configuration allows the GPS module to operate in different power modes for optimized power
+            // consumption.
+            // The modes supported are:
+            // 0x00 = Full power: The module operates at full power with no power saving.
+            // 0x01 = Balanced: The module dynamically adjusts the tracking behavior to balance power consumption.
+            // 0x02 = Interval: The module operates in a periodic mode, cycling between tracking and power saving states.
+            // 0x03 = Aggressive with 1 Hz: The module operates in a power saving mode with a 1 Hz update rate.
+            // 0x04 = Aggressive with 2 Hz: The module operates in a power saving mode with a 2 Hz update rate.
+            // 0x05 = Aggressive with 4 Hz: The module operates in a power saving mode with a 4 Hz update rate.
+            // The 'period' field specifies the position update and search period. It is only valid when the powerSetupValue is
+            // set to Interval; otherwise, it must be set to '0'. The 'onTime' field specifies the duration of the ON phase and
+            // must be smaller than the period. It is only valid when the powerSetupValue is set to Interval; otherwise, it must
+            // be set to '0'.
+            byte UBX_CFG_PMS[14] = {
+                0xB5, 0x62, // UBX sync characters
+                0x06, 0x86, // Message class and ID (UBX-CFG-PMS)
+                0x06, 0x00, // Length of payload (6 bytes)
+                0x00,       // Version (0)
+                0x03,       // Power setup value
+                0x00, 0x00, // period: not applicable, set to 0
+                0x00, 0x00, // onTime: not applicable, set to 0
+                0x00, 0x00  // Placeholder for checksum, will be calculated next
+            };
+
+            // Calculate the checksum and update the message
+            UBXChecksum(UBX_CFG_PMS, sizeof(UBX_CFG_PMS));
+
+            // Send the message to the module
+            _serial_gps->write(UBX_CFG_PMS, sizeof(UBX_CFG_PMS));
+            if (!getACK(0x06, 0x86)) {
+                LOG_WARN("Unable to enable powersaving for GPS.\n");
+                return true;
+            }
+
+            // We need save configuration to flash to make our config changes persistent
+            byte _message_SAVE[21] = {
+                0xB5, 0x62,             // UBX protocol header
+                0x06, 0x09,             // UBX class ID (Configuration Input Messages), message ID (UBX-CFG-CFG)
+                0x0D, 0x00,             // Length of payload (13 bytes)
+                0x00, 0x00, 0x00, 0x00, // clearMask: no sections cleared
+                0xFF, 0xFF, 0x00, 0x00, // saveMask: save all sections
+                0x00, 0x00, 0x00, 0x00, // loadMask: no sections loaded
+                0x0F,                   // deviceMask: BBR, Flash, EEPROM, and SPI Flash
+                0x00, 0x00              // Checksum (calculated below)
+            };
+
+            // Calculate the checksum and update the message.
+            UBXChecksum(_message_SAVE, sizeof(_message_SAVE));
+
+            // Send the message to the module
+            _serial_gps->write(_message_SAVE, sizeof(_message_SAVE));
+
+            if (!getACK(0x06, 0x09)) {
+                LOG_WARN("Unable to save GNSS module configuration.\n");
+                return true;
+            } else {
+                LOG_INFO("GNSS module configuration saved!\n");
+                return true;
             }
         }
     }
@@ -269,22 +572,21 @@ bool GPS::setupGPS()
 bool GPS::setup()
 {
     // Master power for the GPS
-#ifdef PIN_GPS_EN
-    digitalWrite(PIN_GPS_EN, 1);
-    pinMode(PIN_GPS_EN, OUTPUT);
-#endif
 
-#ifdef HAS_PMU
+#if defined(HAS_PMU) || defined(PIN_GPS_EN)
     if (config.position.gps_enabled) {
+#ifdef PIN_GPS_EN
+        pinMode(PIN_GPS_EN, OUTPUT);
+#endif
         setGPSPower(true);
     }
 #endif
 
 #ifdef PIN_GPS_RESET
-    digitalWrite(PIN_GPS_RESET, 1); // assert for 10ms
+    digitalWrite(PIN_GPS_RESET, GPS_RESET_MODE); // assert for 10ms
     pinMode(PIN_GPS_RESET, OUTPUT);
     delay(10);
-    digitalWrite(PIN_GPS_RESET, 0);
+    digitalWrite(PIN_GPS_RESET, !GPS_RESET_MODE);
 #endif
     setAwake(true); // Wake GPS power before doing any init
     bool ok = setupGPS();
@@ -384,7 +686,7 @@ void GPS::setAwake(bool on)
     }
 }
 
-/** Get how long we should stay looking for each aquisition in msecs
+/** Get how long we should stay looking for each acquisition in msecs
  */
 uint32_t GPS::getWakeTime() const
 {
@@ -555,21 +857,17 @@ int GPS::prepareDeepSleep(void *unused)
 
 GnssModel_t GPS::probe()
 {
-    // return immediately if the model is set by the variant.h file
-#ifdef GPS_UBLOX
-    return GNSS_MODEL_UBLOX;
-#elif defined(GPS_L76K)
-    return GNSS_MODEL_MTK;
-#else
-    // we use autodetect, only T-BEAM S3 for now...
-    uint8_t buffer[256];
-    /*
-     * The GNSS module information variable is temporarily placed inside the function body,
-     * if it needs to be used elsewhere, it can be moved to the outside
-     * */
-    struct uBloxGnssModelInfo info;
-
     memset(&info, 0, sizeof(struct uBloxGnssModelInfo));
+// return immediately if the model is set by the variant.h file
+//#ifdef GPS_UBLOX               (unless it's a ublox, because we might want to know the module info!
+//    return GNSS_MODEL_UBLOX;    think about removing this macro and return)
+#if defined(GPS_L76K)
+    return GNSS_MODEL_MTK;
+#elif defined(GPS_UC6580)
+    _serial_gps->updateBaudRate(115200);
+    return GNSS_MODEL_UC6850;
+#else
+    uint8_t buffer[384] = {0};
 
     // Close all NMEA sentences , Only valid for MTK platform
     _serial_gps->write("$PCAS03,0,0,0,0,0,0,0,0,0,0,,,0,0*02\r\n");
@@ -597,31 +895,37 @@ GnssModel_t GPS::probe()
     uint8_t cfg_rate[] = {0xB5, 0x62, 0x06, 0x08, 0x00, 0x00, 0x0E, 0x30};
     _serial_gps->write(cfg_rate, sizeof(cfg_rate));
     // Check that the returned response class and message ID are correct
-    if (!getAck(buffer, 256, 0x06, 0x08)) {
+    if (!getAck(buffer, 384, 0x06, 0x08)) {
         LOG_WARN("Failed to find UBlox & MTK GNSS Module\n");
-        return GNSS_MODEL_UNKONW;
+        return GNSS_MODEL_UNKNOWN;
     }
-
+    memset(buffer, 0, sizeof(buffer));
+    byte _message_MONVER[8] = {
+        0xB5, 0x62, // Sync message for UBX protocol
+        0x0A, 0x04, // Message class and ID (UBX-MON-VER)
+        0x00, 0x00, // Length of payload (we're asking for an answer, so no payload)
+        0x00, 0x00  // Checksum
+    };
     //  Get Ublox gnss module hardware and software info
-    uint8_t cfg_get_hw[] = {0xB5, 0x62, 0x0A, 0x04, 0x00, 0x00, 0x0E, 0x34};
-    _serial_gps->write(cfg_get_hw, sizeof(cfg_get_hw));
+    UBXChecksum(_message_MONVER, sizeof(_message_MONVER));
+    _serial_gps->write(_message_MONVER, sizeof(_message_MONVER));
 
-    uint16_t len = getAck(buffer, 256, 0x0A, 0x04);
+    uint16_t len = getAck(buffer, 384, 0x0A, 0x04);
     if (len) {
-
+        // LOG_DEBUG("monver reply size = %d\n", len);
         uint16_t position = 0;
         for (int i = 0; i < 30; i++) {
             info.swVersion[i] = buffer[position];
             position++;
         }
         for (int i = 0; i < 10; i++) {
-            info.hwVersion[i] = buffer[position];
+            info.hwVersion[i] = buffer[position - 1];
             position++;
         }
 
         while (len >= position + 30) {
             for (int i = 0; i < 30; i++) {
-                info.extension[info.extensionNo][i] = buffer[position];
+                info.extension[info.extensionNo][i] = buffer[position - 1];
                 position++;
             }
             info.extensionNo++;
@@ -631,6 +935,7 @@ GnssModel_t GPS::probe()
 
         LOG_DEBUG("Module Info : \n");
         LOG_DEBUG("Soft version: %s\n", info.swVersion);
+        LOG_DEBUG("first char is %c\n", (char)info.swVersion[0]);
         LOG_DEBUG("Hard version: %s\n", info.hwVersion);
         LOG_DEBUG("Extensions:%d\n", info.extensionNo);
         for (int i = 0; i < info.extensionNo; i++) {
@@ -641,19 +946,29 @@ GnssModel_t GPS::probe()
 
         // tips: extensionNo field is 0 on some 6M GNSS modules
         for (int i = 0; i < info.extensionNo; ++i) {
-            if (!strncmp(info.extension[i], "OD=", 3)) {
-                strncpy((char *)buffer, &(info.extension[i][3]), sizeof(buffer));
-                LOG_DEBUG("GetModel:%s\n", (char *)buffer);
+            if (!strncmp(info.extension[i], "MOD=", 4)) {
+                strncpy((char *)buffer, &(info.extension[i][4]), sizeof(buffer));
+                // LOG_DEBUG("GetModel:%s\n", (char *)buffer);
+                if (strlen((char *)buffer)) {
+                    LOG_INFO("UBlox GNSS init succeeded, using UBlox %s GNSS Module\n", (char *)buffer);
+                } else {
+                    LOG_INFO("UBlox GNSS init succeeded, using UBlox GNSS Module\n");
+                }
+            } else if (!strncmp(info.extension[i], "PROTVER=", 8)) {
+                char *ptr = nullptr;
+                memset(buffer, 0, sizeof(buffer));
+                strncpy((char *)buffer, &(info.extension[i][8]), sizeof(buffer));
+                LOG_DEBUG("Protocol Version:%s\n", (char *)buffer);
+                if (strlen((char *)buffer)) {
+                    uBloxProtocolVersion = strtoul((char *)buffer, &ptr, 10);
+                    LOG_DEBUG("ProtVer=%d\n", uBloxProtocolVersion);
+                } else {
+                    uBloxProtocolVersion = 0;
+                }
             }
         }
     }
 
-    if (strlen((char *)buffer)) {
-        LOG_INFO("UBlox GNSS init succeeded, using UBlox %s GNSS Module\n", buffer);
-    } else {
-        LOG_INFO("UBlox GNSS init succeeded, using UBlox GNSS Module\n");
-    }
-
     return GNSS_MODEL_UBLOX;
 #endif
 }
@@ -675,8 +990,8 @@ GPS *createGps()
         LOG_DEBUG("Using MSL altitude model\n");
 #endif
         if (GPS::_serial_gps) {
-            // Some boards might have only the TX line from the GPS connected, in that case, we can't configure it at all.  Just
-            // assume NMEA at 9600 baud.
+            // Some boards might have only the TX line from the GPS connected, in that case, we can't configure it at all.
+            // Just assume NMEA at 9600 baud.
             GPS *new_gps = new NMEAGPS();
             new_gps->setup();
             return new_gps;
@@ -688,4 +1003,4 @@ GPS *createGps()
     }
     return nullptr;
 #endif
-}
+}

src/gps/GPS.h

@@ -14,7 +14,8 @@ struct uBloxGnssModelInfo {
 typedef enum {
     GNSS_MODEL_MTK,
     GNSS_MODEL_UBLOX,
-    GNSS_MODEL_UNKONW,
+    GNSS_MODEL_UC6850,
+    GNSS_MODEL_UNKNOWN,
 } GnssModel_t;
 
 // Generate a string representation of DOP
@@ -139,6 +140,9 @@ class GPS : private concurrency::OSThread
     /// always returns 0 to indicate okay to sleep
     int prepareDeepSleep(void *unused);
 
+    // Calculate checksum
+    void UBXChecksum(byte *message, size_t length);
+
     /**
      * Switch the GPS into a mode where we are actively looking for a lock, or alternatively switch GPS into a low power mode
      *
@@ -164,6 +168,7 @@ class GPS : private concurrency::OSThread
     virtual int32_t runOnce() override;
 
     // Get GNSS model
+    String getNMEA();
     GnssModel_t probe();
 
     int getAck(uint8_t *buffer, uint16_t size, uint8_t requestedClass, uint8_t requestedID);
@@ -172,11 +177,11 @@ class GPS : private concurrency::OSThread
     uint8_t fixeddelayCtr = 0;
 
   protected:
-    GnssModel_t gnssModel = GNSS_MODEL_UNKONW;
+    GnssModel_t gnssModel = GNSS_MODEL_UNKNOWN;
 };
 
 // Creates an instance of the GPS class.
 // Returns the new instance or null if the GPS is not present.
 GPS *createGps();
 
-extern GPS *gps;
+extern GPS *gps;

src/gps/GeoCoord.cpp

@@ -12,7 +12,7 @@ GeoCoord::GeoCoord(int32_t lat, int32_t lon, int32_t alt) : _latitude(lat), _lon
 
 GeoCoord::GeoCoord(float lat, float lon, int32_t alt) : _altitude(alt)
 {
-    // Change decimial reprsentation to int32_t. I.e., 12.345 becomes 123450000
+    // Change decimial representation to int32_t. I.e., 12.345 becomes 123450000
     _latitude = int32_t(lat * 1e+7);
     _longitude = int32_t(lon * 1e+7);
     GeoCoord::setCoords();
@@ -20,7 +20,7 @@ GeoCoord::GeoCoord(float lat, float lon, int32_t alt) : _altitude(alt)
 
 GeoCoord::GeoCoord(double lat, double lon, int32_t alt) : _altitude(alt)
 {
-    // Change decimial reprsentation to int32_t. I.e., 12.345 becomes 123450000
+    // Change decimial representation to int32_t. I.e., 12.345 becomes 123450000
     _latitude = int32_t(lat * 1e+7);
     _longitude = int32_t(lon * 1e+7);
     GeoCoord::setCoords();
@@ -41,7 +41,7 @@ void GeoCoord::setCoords()
 
 void GeoCoord::updateCoords(int32_t lat, int32_t lon, int32_t alt)
 {
-    // If marked dirty or new coordiantes
+    // If marked dirty or new coordinates
     if (_dirty || _latitude != lat || _longitude != lon || _altitude != alt) {
         _dirty = true;
         _latitude = lat;
@@ -55,7 +55,7 @@ void GeoCoord::updateCoords(const double lat, const double lon, const int32_t al
 {
     int32_t iLat = lat * 1e+7;
     int32_t iLon = lon * 1e+7;
-    // If marked dirty or new coordiantes
+    // If marked dirty or new coordinates
     if (_dirty || _latitude != iLat || _longitude != iLon || _altitude != alt) {
         _dirty = true;
         _latitude = iLat;
@@ -69,7 +69,7 @@ void GeoCoord::updateCoords(const float lat, const float lon, const int32_t alt)
 {
     int32_t iLat = lat * 1e+7;
     int32_t iLon = lon * 1e+7;
-    // If marked dirty or new coordiantes
+    // If marked dirty or new coordinates
     if (_dirty || _latitude != iLat || _longitude != iLon || _altitude != alt) {
         _dirty = true;
         _latitude = iLat;
@@ -217,7 +217,7 @@ void GeoCoord::latLongToOSGR(const double lat, const double lon, OSGR &osgr)
     double eta2 = v / rho - 1;
     double mA = (1 + n + (5 / 4) * n * n + (5 / 4) * n * n * n) * (phi - phi0);
     double mB = (3 * n + 3 * n * n + (21 / 8) * n * n * n) * sin(phi - phi0) * cos(phi + phi0);
-    // loss of precision in mC & mD due to floating point rounding can cause innaccuracy of northing by a few meters
+    // loss of precision in mC & mD due to floating point rounding can cause inaccuracy of northing by a few meters
     double mC = (15 / 8 * n * n + 15 / 8 * n * n * n) * sin(2 * (phi - phi0)) * cos(2 * (phi + phi0));
     double mD = (35 / 24) * n * n * n * sin(3 * (phi - phi0)) * cos(3 * (phi + phi0));
     double m = b * f0 * (mA - mB + mC - mD);

src/gps/GeoCoord.h

@@ -65,7 +65,7 @@ struct MGRS {
     uint32_t northing;
 };
 
-// A struct to hold the data for a OSGR coordiante
+// A struct to hold the data for a OSGR coordinate
 struct OSGR {
     char e100k;
     char n100k;

src/gps/NMEAWPL.cpp

@@ -1,5 +1,7 @@
 #include "NMEAWPL.h"
 #include "GeoCoord.h"
+#include "RTC.h"
+#include <time.h>
 
 /* -------------------------------------------
  *        1       2 3        4 5    6
@@ -16,10 +18,11 @@
  * -------------------------------------------
  */
 
-uint32_t printWPL(char *buf, size_t bufsz, const meshtastic_Position &pos, const char *name)
+uint32_t printWPL(char *buf, size_t bufsz, const meshtastic_PositionLite &pos, const char *name, bool isCaltopoMode)
 {
     GeoCoord geoCoord(pos.latitude_i, pos.longitude_i, pos.altitude);
-    uint32_t len = snprintf(buf, bufsz, "$GNWPL,%02d%07.4f,%c,%03d%07.4f,%c,%s", geoCoord.getDMSLatDeg(),
+    char type = isCaltopoMode ? 'P' : 'N';
+    uint32_t len = snprintf(buf, bufsz, "$G%cWPL,%02d%07.4f,%c,%03d%07.4f,%c,%s", type, geoCoord.getDMSLatDeg(),
                             (abs(geoCoord.getLatitude()) - geoCoord.getDMSLatDeg() * 1e+7) * 6e-6, geoCoord.getDMSLatCP(),
                             geoCoord.getDMSLonDeg(), (abs(geoCoord.getLongitude()) - geoCoord.getDMSLonDeg() * 1e+7) * 6e-6,
                             geoCoord.getDMSLonCP(), name);
@@ -31,6 +34,21 @@ uint32_t printWPL(char *buf, size_t bufsz, const meshtastic_Position &pos, const
     return len;
 }
 
+uint32_t printWPL(char *buf, size_t bufsz, const meshtastic_Position &pos, const char *name, bool isCaltopoMode)
+{
+    GeoCoord geoCoord(pos.latitude_i, pos.longitude_i, pos.altitude);
+    char type = isCaltopoMode ? 'P' : 'N';
+    uint32_t len = snprintf(buf, bufsz, "$G%cWPL,%02d%07.4f,%c,%03d%07.4f,%c,%s", type, geoCoord.getDMSLatDeg(),
+                            (abs(geoCoord.getLatitude()) - geoCoord.getDMSLatDeg() * 1e+7) * 6e-6, geoCoord.getDMSLatCP(),
+                            geoCoord.getDMSLonDeg(), (abs(geoCoord.getLongitude()) - geoCoord.getDMSLonDeg() * 1e+7) * 6e-6,
+                            geoCoord.getDMSLonCP(), name);
+    uint32_t chk = 0;
+    for (uint32_t i = 1; i < len; i++) {
+        chk ^= buf[i];
+    }
+    len += snprintf(buf + len, bufsz - len, "*%02X\r\n", chk);
+    return len;
+}
 /* -------------------------------------------
  *        1         2       3 4       5 6 7  8   9  10 11 12 13  14   15
  *        |         |       | |       | | |  |   |   | |   | |   |    |
@@ -56,12 +74,18 @@ uint32_t printWPL(char *buf, size_t bufsz, const meshtastic_Position &pos, const
 uint32_t printGGA(char *buf, size_t bufsz, const meshtastic_Position &pos)
 {
     GeoCoord geoCoord(pos.latitude_i, pos.longitude_i, pos.altitude);
-    uint32_t len =
-        snprintf(buf, bufsz, "$GNGGA,%06u.%03u,%02d%07.4f,%c,%03d%07.4f,%c,%u,%02u,%04u,%04d,%c,%04d,%c,%d,%04d", pos.time / 1000,
-                 pos.time % 1000, geoCoord.getDMSLatDeg(), (abs(geoCoord.getLatitude()) - geoCoord.getDMSLatDeg() * 1e+7) * 6e-6,
-                 geoCoord.getDMSLatCP(), geoCoord.getDMSLonDeg(),
-                 (abs(geoCoord.getLongitude()) - geoCoord.getDMSLonDeg() * 1e+7) * 6e-6, geoCoord.getDMSLonCP(), pos.fix_type,
-                 pos.sats_in_view, pos.HDOP, geoCoord.getAltitude(), 'M', pos.altitude_geoidal_separation, 'M', 0, 0);
+    tm *t = localtime((time_t *)&pos.timestamp);
+    if (getRTCQuality() > 0) { // use the device clock if we got time from somewhere. If not, use the GPS timestamp.
+        uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice);
+        t = localtime((time_t *)&rtc_sec);
+    }
+
+    uint32_t len = snprintf(
+        buf, bufsz, "$GNGGA,%02d%02d%02d.%02d,%02d%07.4f,%c,%03d%07.4f,%c,%u,%02u,%04u,%04d,%c,%04d,%c,%d,%04d", t->tm_hour,
+        t->tm_min, t->tm_sec, pos.timestamp_millis_adjust, geoCoord.getDMSLatDeg(),
+        (abs(geoCoord.getLatitude()) - geoCoord.getDMSLatDeg() * 1e+7) * 6e-6, geoCoord.getDMSLatCP(), geoCoord.getDMSLonDeg(),
+        (abs(geoCoord.getLongitude()) - geoCoord.getDMSLonDeg() * 1e+7) * 6e-6, geoCoord.getDMSLonCP(), pos.fix_quality,
+        pos.sats_in_view, pos.HDOP, geoCoord.getAltitude(), 'M', pos.altitude_geoidal_separation, 'M', 0, 0);
 
     uint32_t chk = 0;
     for (uint32_t i = 1; i < len; i++) {

src/gps/NMEAWPL.h

@@ -3,5 +3,6 @@
 #include "main.h"
 #include <Arduino.h>
 
-uint32_t printWPL(char *buf, size_t bufsz, const meshtastic_Position &pos, const char *name);
-uint32_t printGGA(char *buf, size_t bufsz, const meshtastic_Position &pos);
+uint32_t printWPL(char *buf, size_t bufsz, const meshtastic_Position &pos, const char *name, bool isCaltopoMode = false);
+uint32_t printWPL(char *buf, size_t bufsz, const meshtastic_PositionLite &pos, const char *name, bool isCaltopoMode = false);
+uint32_t printGGA(char *buf, size_t bufsz, const meshtastic_Position &pos);

src/gps/RTC.cpp

@@ -19,7 +19,7 @@ static uint64_t zeroOffsetSecs; // GPS based time in secs since 1970 - only upda
 
 void readFromRTC()
 {
-    struct timeval tv; /* btw settimeofday() is helpfull here too*/
+    struct timeval tv; /* btw settimeofday() is helpful here too*/
 #ifdef RV3028_RTC
     if (rtc_found.address == RV3028_RTC) {
         uint32_t now = millis();

src/graphics/EInkDisplay2.cpp

@@ -7,6 +7,10 @@
 #include "main.h"
 #include <SPI.h>
 
+// #ifdef HELTEC_WIRELESS_PAPER
+// SPIClass *hspi = NULL;
+// #endif
+
 #define COLORED GxEPD_BLACK
 #define UNCOLORED GxEPD_WHITE
 
@@ -19,13 +23,13 @@
 #define TECHO_DISPLAY_MODEL GxEPD2_213_BN
 
 // 4.2 inch 300x400 - GxEPD2_420_M01
-//#define TECHO_DISPLAY_MODEL GxEPD2_420_M01
+// #define TECHO_DISPLAY_MODEL GxEPD2_420_M01
 
 // 2.9 inch 296x128 - GxEPD2_290_T5D
-//#define TECHO_DISPLAY_MODEL GxEPD2_290_T5D
+// #define TECHO_DISPLAY_MODEL GxEPD2_290_T5D
 
 // 1.54 inch 200x200 - GxEPD2_154_M09
-//#define TECHO_DISPLAY_MODEL GxEPD2_154_M09
+// #define TECHO_DISPLAY_MODEL GxEPD2_154_M09
 
 #elif defined(MAKERPYTHON)
 // 2.9 inch 296x128 - GxEPD2_290_T5D
@@ -41,6 +45,9 @@
 // 1.54 inch 200x200 - GxEPD2_154_M09
 #define TECHO_DISPLAY_MODEL GxEPD2_154_M09
 
+#elif defined(HELTEC_WIRELESS_PAPER)
+//#define TECHO_DISPLAY_MODEL GxEPD2_213_T5D
+#define TECHO_DISPLAY_MODEL GxEPD2_213_BN
 #endif
 
 GxEPD2_BW<TECHO_DISPLAY_MODEL, TECHO_DISPLAY_MODEL::HEIGHT> *adafruitDisplay;
@@ -62,6 +69,10 @@ EInkDisplay::EInkDisplay(uint8_t address, int sda, int scl, OLEDDISPLAY_GEOMETRY
 
     // GxEPD2_154_M09
     // setGeometry(GEOMETRY_RAWMODE, 200, 200);
+
+#elif defined(HELTEC_WIRELESS_PAPER)
+    // setGeometry(GEOMETRY_RAWMODE, 212, 104);
+    setGeometry(GEOMETRY_RAWMODE, 250, 122);
 #elif defined(MAKERPYTHON)
     // GxEPD2_290_T5D
     setGeometry(GEOMETRY_RAWMODE, 296, 128);
@@ -109,7 +120,7 @@ bool EInkDisplay::forceDisplay(uint32_t msecLimit)
         for (uint32_t y = 0; y < displayHeight; y++) {
             for (uint32_t x = 0; x < displayWidth; x++) {
 
-                // get src pixel in the page based ordering the OLED lib uses FIXME, super inefficent
+                // get src pixel in the page based ordering the OLED lib uses FIXME, super inefficient
                 auto b = buffer[x + (y / 8) * displayWidth];
                 auto isset = b & (1 << (y & 7));
                 adafruitDisplay->drawPixel(x, y, isset ? COLORED : UNCOLORED);
@@ -218,6 +229,16 @@ bool EInkDisplay::connect()
             (void)adafruitDisplay;
         }
     }
+#elif defined(HELTEC_WIRELESS_PAPER)
+    {
+        auto lowLevel = new TECHO_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY);
+        adafruitDisplay = new GxEPD2_BW<TECHO_DISPLAY_MODEL, TECHO_DISPLAY_MODEL::HEIGHT>(*lowLevel);
+        // hspi = new SPIClass(HSPI);
+        // hspi->begin(PIN_EINK_SCLK, -1, PIN_EINK_MOSI, PIN_EINK_CS); // SCLK, MISO, MOSI, SS
+        adafruitDisplay->init(115200, true, 10, false, SPI, SPISettings(6000000, MSBFIRST, SPI_MODE0));
+        adafruitDisplay->setRotation(3);
+        adafruitDisplay->setPartialWindow(0, 0, displayWidth, displayHeight);
+    }
 #elif defined(PCA10059)
     {
         auto lowLevel = new TECHO_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY);

src/graphics/RAKled.h

@@ -0,0 +1,7 @@
+#include "main.h"
+
+#ifdef HAS_NCP5623
+#include <NCP5623.h>
+extern NCP5623 rgb;
+
+#endif

src/graphics/Screen.cpp

@@ -27,9 +27,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "GPS.h"
 #include "MeshService.h"
 #include "NodeDB.h"
+#include "error.h"
 #include "gps/GeoCoord.h"
 #include "gps/RTC.h"
 #include "graphics/images.h"
+#include "input/TouchScreenImpl1.h"
 #include "main.h"
 #include "mesh-pb-constants.h"
 #include "mesh/Channels.h"
@@ -101,7 +103,7 @@ static uint16_t displayWidth, displayHeight;
 #define SCREEN_WIDTH displayWidth
 #define SCREEN_HEIGHT displayHeight
 
-#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS)
+#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS)
 // The screen is bigger so use bigger fonts
 #define FONT_SMALL ArialMT_Plain_16  // Height: 19
 #define FONT_MEDIUM ArialMT_Plain_24 // Height: 28
@@ -295,7 +297,7 @@ static void drawModuleFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int
 static void drawFrameBluetooth(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
     int x_offset = display->width() / 2;
-    int y_offset = display->height() == 64 ? 0 : 32;
+    int y_offset = display->height() <= 80 ? 0 : 32;
     display->setTextAlignment(TEXT_ALIGN_CENTER);
     display->setFont(FONT_MEDIUM);
     display->drawString(x_offset + x, y_offset + y, "Bluetooth");
@@ -319,18 +321,18 @@ static void drawFrameBluetooth(OLEDDisplay *display, OLEDDisplayUiState *state,
 
 static void drawFrameShutdown(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
+    uint16_t x_offset = display->width() / 2;
     display->setTextAlignment(TEXT_ALIGN_CENTER);
-
     display->setFont(FONT_MEDIUM);
-    display->drawString(64 + x, 26 + y, "Shutting down...");
+    display->drawString(x_offset + x, 26 + y, "Shutting down...");
 }
 
 static void drawFrameReboot(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
+    uint16_t x_offset = display->width() / 2;
     display->setTextAlignment(TEXT_ALIGN_CENTER);
-
     display->setFont(FONT_MEDIUM);
-    display->drawString(64 + x, 26 + y, "Rebooting...");
+    display->drawString(x_offset + x, 26 + y, "Rebooting...");
 }
 
 static void drawFrameFirmware(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
@@ -352,14 +354,14 @@ static void drawCriticalFaultFrame(OLEDDisplay *display, OLEDDisplayUiState *sta
     display->setFont(FONT_MEDIUM);
 
     char tempBuf[24];
-    snprintf(tempBuf, sizeof(tempBuf), "Critical fault #%d", myNodeInfo.error_code);
+    snprintf(tempBuf, sizeof(tempBuf), "Critical fault #%d", error_code);
     display->drawString(0 + x, 0 + y, tempBuf);
     display->setTextAlignment(TEXT_ALIGN_LEFT);
     display->setFont(FONT_SMALL);
     display->drawString(0 + x, FONT_HEIGHT_MEDIUM + y, "For help, please visit \nmeshtastic.org");
 }
 
-// Ignore messages orginating from phone (from the current node 0x0) unless range test or store and forward module are enabled
+// Ignore messages originating from phone (from the current node 0x0) unless range test or store and forward module are enabled
 static bool shouldDrawMessage(const meshtastic_MeshPacket *packet)
 {
     return packet->from != 0 && !moduleConfig.range_test.enabled && !moduleConfig.store_forward.enabled;
@@ -372,7 +374,7 @@ static void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state
     static char tempBuf[237];
 
     meshtastic_MeshPacket &mp = devicestate.rx_text_message;
-    meshtastic_NodeInfo *node = nodeDB.getNode(getFrom(&mp));
+    meshtastic_NodeInfoLite *node = nodeDB.getMeshNode(getFrom(&mp));
     // LOG_DEBUG("drawing text message from 0x%x: %s\n", mp.from,
     // mp.decoded.variant.data.decoded.bytes);
 
@@ -410,7 +412,7 @@ static void drawWaypointFrame(OLEDDisplay *display, OLEDDisplayUiState *state, i
     static char tempBuf[237];
 
     meshtastic_MeshPacket &mp = devicestate.rx_waypoint;
-    meshtastic_NodeInfo *node = nodeDB.getNode(getFrom(&mp));
+    meshtastic_NodeInfoLite *node = nodeDB.getMeshNode(getFrom(&mp));
 
     display->setTextAlignment(TEXT_ALIGN_LEFT);
     display->setFont(FONT_SMALL);
@@ -441,7 +443,7 @@ static void drawWaypointFrame(OLEDDisplay *display, OLEDDisplayUiState *state, i
     }
 }
 
-/// Draw a series of fields in a column, wrapping to multiple colums if needed
+/// Draw a series of fields in a column, wrapping to multiple columns if needed
 static void drawColumns(OLEDDisplay *display, int16_t x, int16_t y, const char **fields)
 {
     // The coordinates define the left starting point of the text
@@ -491,7 +493,7 @@ static void drawNodes(OLEDDisplay *display, int16_t x, int16_t y, NodeStatus *no
 {
     char usersString[20];
     snprintf(usersString, sizeof(usersString), "%d/%d", nodeStatus->getNumOnline(), nodeStatus->getNumTotal());
-#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS)
+#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS)
     display->drawFastImage(x, y + 3, 8, 8, imgUser);
 #else
     display->drawFastImage(x, y, 8, 8, imgUser);
@@ -711,13 +713,6 @@ static float estimatedHeading(double lat, double lon)
     return b;
 }
 
-/// Sometimes we will have Position objects that only have a time, so check for
-/// valid lat/lon
-static bool hasPosition(meshtastic_NodeInfo *n)
-{
-    return n->has_position && (n->position.latitude_i != 0 || n->position.longitude_i != 0);
-}
-
 static uint16_t getCompassDiam(OLEDDisplay *display)
 {
     uint16_t diam = 0;
@@ -799,16 +794,16 @@ static void drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_
     if (state->currentFrame != prevFrame) {
         prevFrame = state->currentFrame;
 
-        nodeIndex = (nodeIndex + 1) % nodeDB.getNumNodes();
-        meshtastic_NodeInfo *n = nodeDB.getNodeByIndex(nodeIndex);
+        nodeIndex = (nodeIndex + 1) % nodeDB.getNumMeshNodes();
+        meshtastic_NodeInfoLite *n = nodeDB.getMeshNodeByIndex(nodeIndex);
         if (n->num == nodeDB.getNodeNum()) {
             // Don't show our node, just skip to next
-            nodeIndex = (nodeIndex + 1) % nodeDB.getNumNodes();
-            n = nodeDB.getNodeByIndex(nodeIndex);
+            nodeIndex = (nodeIndex + 1) % nodeDB.getNumMeshNodes();
+            n = nodeDB.getMeshNodeByIndex(nodeIndex);
         }
     }
 
-    meshtastic_NodeInfo *node = nodeDB.getNodeByIndex(nodeIndex);
+    meshtastic_NodeInfoLite *node = nodeDB.getMeshNodeByIndex(nodeIndex);
 
     display->setFont(FONT_SMALL);
 
@@ -841,8 +836,12 @@ static void drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_
     }
 
     static char distStr[20];
-    strncpy(distStr, "? km", sizeof(distStr)); // might not have location data
-    meshtastic_NodeInfo *ourNode = nodeDB.getNode(nodeDB.getNodeNum());
+    if (config.display.units == meshtastic_Config_DisplayConfig_DisplayUnits_IMPERIAL) {
+        strncpy(distStr, "? mi", sizeof(distStr)); // might not have location data
+    } else {
+        strncpy(distStr, "? km", sizeof(distStr));
+    }
+    meshtastic_NodeInfoLite *ourNode = nodeDB.getMeshNode(nodeDB.getNodeNum());
     const char *fields[] = {username, distStr, signalStr, lastStr, NULL};
     int16_t compassX = 0, compassY = 0;
 
@@ -856,15 +855,15 @@ static void drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_
     }
     bool hasNodeHeading = false;
 
-    if (ourNode && hasPosition(ourNode)) {
-        meshtastic_Position &op = ourNode->position;
+    if (ourNode && hasValidPosition(ourNode)) {
+        meshtastic_PositionLite &op = ourNode->position;
         float myHeading = estimatedHeading(DegD(op.latitude_i), DegD(op.longitude_i));
         drawCompassNorth(display, compassX, compassY, myHeading);
 
-        if (hasPosition(node)) {
+        if (hasValidPosition(node)) {
             // display direction toward node
             hasNodeHeading = true;
-            meshtastic_Position &p = node->position;
+            meshtastic_PositionLite &p = node->position;
             float d =
                 GeoCoord::latLongToMeter(DegD(p.latitude_i), DegD(p.longitude_i), DegD(op.latitude_i), DegD(op.longitude_i));
 
@@ -892,7 +891,8 @@ static void drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_
     if (!hasNodeHeading) {
         // direction to node is unknown so display question mark
         // Debug info for gps lock errors
-        // LOG_DEBUG("ourNode %d, ourPos %d, theirPos %d\n", !!ourNode, ourNode && hasPosition(ourNode), hasPosition(node));
+        // LOG_DEBUG("ourNode %d, ourPos %d, theirPos %d\n", !!ourNode, ourNode && hasValidPosition(ourNode),
+        // hasValidPosition(node));
         display->drawString(compassX - FONT_HEIGHT_SMALL / 4, compassY - FONT_HEIGHT_SMALL / 2, "?");
     }
     display->drawCircle(compassX, compassY, getCompassDiam(display) / 2);
@@ -949,6 +949,9 @@ void Screen::handleSetOn(bool on)
     if (on != screenOn) {
         if (on) {
             LOG_INFO("Turning on screen\n");
+#ifdef T_WATCH_S3
+            PMU->enablePowerOutput(XPOWERS_ALDO2);
+#endif
             dispdev.displayOn();
             dispdev.displayOn();
             enabled = true;
@@ -957,6 +960,9 @@ void Screen::handleSetOn(bool on)
         } else {
             LOG_INFO("Turning off screen\n");
             dispdev.displayOff();
+#ifdef T_WATCH_S3
+            PMU->disablePowerOutput(XPOWERS_ALDO2);
+#endif
             enabled = false;
         }
         screenOn = on;
@@ -1039,12 +1045,18 @@ void Screen::setup()
 #endif
     serialSinceMsec = millis();
 
+#if HAS_TOUCHSCREEN
+    touchScreenImpl1 = new TouchScreenImpl1(dispdev.getWidth(), dispdev.getHeight(), dispdev.getTouch);
+    touchScreenImpl1->init();
+#endif
+
     // Subscribe to status updates
     powerStatusObserver.observe(&powerStatus->onNewStatus);
     gpsStatusObserver.observe(&gpsStatus->onNewStatus);
     nodeStatusObserver.observe(&nodeStatus->onNewStatus);
     if (textMessageModule)
         textMessageObserver.observe(textMessageModule);
+    inputObserver.observe(inputBroker);
 
     // Modules can notify screen about refresh
     MeshModule::observeUIEvents(&uiFrameEventObserver);
@@ -1122,6 +1134,12 @@ int32_t Screen::runOnce()
                 handleOnPress();
             }
             break;
+        case Cmd::SHOW_PREV_FRAME:
+            handleShowPrevFrame();
+            break;
+        case Cmd::SHOW_NEXT_FRAME:
+            handleShowNextFrame();
+            break;
         case Cmd::START_BLUETOOTH_PIN_SCREEN:
             handleStartBluetoothPinScreen(cmd.bluetooth_pin);
             break;
@@ -1239,13 +1257,15 @@ void Screen::setFrames()
 
     moduleFrames = MeshModule::GetMeshModulesWithUIFrames();
     LOG_DEBUG("Showing %d module frames\n", moduleFrames.size());
+#ifdef DEBUG_PORT
     int totalFrameCount = MAX_NUM_NODES + NUM_EXTRA_FRAMES + moduleFrames.size();
     LOG_DEBUG("Total frame count: %d\n", totalFrameCount);
+#endif
 
     // We don't show the node info our our node (if we have it yet - we should)
-    size_t numnodes = nodeDB.getNumNodes();
-    if (numnodes > 0)
-        numnodes--;
+    size_t numMeshNodes = nodeDB.getNumMeshNodes();
+    if (numMeshNodes > 0)
+        numMeshNodes--;
 
     size_t numframes = 0;
 
@@ -1262,7 +1282,7 @@ void Screen::setFrames()
     LOG_DEBUG("Added modules.  numframes: %d\n", numframes);
 
     // If we have a critical fault, show it first
-    if (myNodeInfo.error_code)
+    if (error_code)
         normalFrames[numframes++] = drawCriticalFaultFrame;
 
     // If we have a text message - show it next, unless it's a phone message and we aren't using any special modules
@@ -1276,7 +1296,7 @@ void Screen::setFrames()
 
     // then all the nodes
     // We only show a few nodes in our scrolling list - because meshes with many nodes would have too many screens
-    size_t numToShow = min(numnodes, 4U);
+    size_t numToShow = min(numMeshNodes, 4U);
     for (size_t i = 0; i < numToShow; i++)
         normalFrames[numframes++] = drawNodeInfo;
 
@@ -1413,6 +1433,28 @@ void Screen::handleOnPress()
     }
 }
 
+void Screen::handleShowPrevFrame()
+{
+    // If screen was off, just wake it, otherwise go back to previous frame
+    // If we are in a transition, the press must have bounced, drop it.
+    if (ui.getUiState()->frameState == FIXED) {
+        ui.previousFrame();
+        lastScreenTransition = millis();
+        setFastFramerate();
+    }
+}
+
+void Screen::handleShowNextFrame()
+{
+    // If screen was off, just wake it, otherwise advance to next frame
+    // If we are in a transition, the press must have bounced, drop it.
+    if (ui.getUiState()->frameState == FIXED) {
+        ui.nextFrame();
+        lastScreenTransition = millis();
+        setFastFramerate();
+    }
+}
+
 #ifndef SCREEN_TRANSITION_FRAMERATE
 #define SCREEN_TRANSITION_FRAMERATE 30 // fps
 #endif
@@ -1485,7 +1527,7 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
 #ifdef ARCH_ESP32
         if (millis() - storeForwardModule->lastHeartbeat >
             (storeForwardModule->heartbeatInterval * 1200)) { // no heartbeat, overlap a bit
-#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS)
+#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS)
             display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8,
                                    imgQuestionL1);
             display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(ourId), y + 11 + FONT_HEIGHT_SMALL, 12, 8,
@@ -1495,7 +1537,7 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
                                    imgQuestion);
 #endif
         } else {
-#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS)
+#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS)
             display->drawFastImage(x + SCREEN_WIDTH - 18 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 16, 8,
                                    imgSFL1);
             display->drawFastImage(x + SCREEN_WIDTH - 18 - display->getStringWidth(ourId), y + 11 + FONT_HEIGHT_SMALL, 16, 8,
@@ -1507,7 +1549,7 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
         }
 #endif
     } else {
-#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS)
+#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS)
         display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8,
                                imgInfoL1);
         display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(ourId), y + 11 + FONT_HEIGHT_SMALL, 12, 8,
@@ -1792,7 +1834,7 @@ void DebugInfo::drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *stat
     heartbeat = !heartbeat;
 #endif
 }
-// adjust Brightness cycle trough 1 to 254 as long as attachDuringLongPress is true
+// adjust Brightness cycle through 1 to 254 as long as attachDuringLongPress is true
 void Screen::adjustBrightness()
 {
     if (!useDisplay)
@@ -1850,7 +1892,21 @@ int Screen::handleUIFrameEvent(const UIFrameEvent *event)
     return 0;
 }
 
+int Screen::handleInputEvent(const InputEvent *event)
+{
+    if (showingNormalScreen && moduleFrames.size() == 0) {
+        LOG_DEBUG("Screen::handleInputEvent from %s\n", event->source);
+        if (event->inputEvent == static_cast<char>(meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_LEFT)) {
+            showPrevFrame();
+        } else if (event->inputEvent == static_cast<char>(meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_RIGHT)) {
+            showNextFrame();
+        }
+    }
+
+    return 0;
+}
+
 } // namespace graphics
 #else
 graphics::Screen::Screen(ScanI2C::DeviceAddress, meshtastic_Config_DisplayConfig_OledType, OLEDDISPLAY_GEOMETRY) {}
-#endif // HAS_SCREEN
+#endif // HAS_SCREEN

src/graphics/Screen.h

@@ -53,6 +53,7 @@ class Screen
 #include "commands.h"
 #include "concurrency/LockGuard.h"
 #include "concurrency/OSThread.h"
+#include "input/InputBroker.h"
 #include "mesh/MeshModule.h"
 #include "power.h"
 #include <string>
@@ -118,6 +119,8 @@ class Screen : public concurrency::OSThread
         CallbackObserver<Screen, const meshtastic_MeshPacket *>(this, &Screen::handleTextMessage);
     CallbackObserver<Screen, const UIFrameEvent *> uiFrameEventObserver =
         CallbackObserver<Screen, const UIFrameEvent *>(this, &Screen::handleUIFrameEvent);
+    CallbackObserver<Screen, const InputEvent *> inputObserver =
+        CallbackObserver<Screen, const InputEvent *>(this, &Screen::handleInputEvent);
 
   public:
     explicit Screen(ScanI2C::DeviceAddress, meshtastic_Config_DisplayConfig_OledType, OLEDDISPLAY_GEOMETRY);
@@ -152,8 +155,10 @@ class Screen : public concurrency::OSThread
 
     void blink();
 
-    /// Handles a button press.
+    /// Handle button press, trackball or swipe action)
     void onPress() { enqueueCmd(ScreenCmd{.cmd = Cmd::ON_PRESS}); }
+    void showPrevFrame() { enqueueCmd(ScreenCmd{.cmd = Cmd::SHOW_PREV_FRAME}); }
+    void showNextFrame() { enqueueCmd(ScreenCmd{.cmd = Cmd::SHOW_NEXT_FRAME}); }
 
     // Implementation to Adjust Brightness
     void adjustBrightness();
@@ -301,9 +306,11 @@ class Screen : public concurrency::OSThread
     // Use this handle to set things like battery status, user count, GPS status, etc.
     DebugInfo *debug_info() { return &debugInfo; }
 
+    // Handle observer events
     int handleStatusUpdate(const meshtastic::Status *arg);
     int handleTextMessage(const meshtastic_MeshPacket *arg);
     int handleUIFrameEvent(const UIFrameEvent *arg);
+    int handleInputEvent(const InputEvent *arg);
 
     /// Used to force (super slow) eink displays to draw critical frames
     void forceDisplay();
@@ -343,6 +350,8 @@ class Screen : public concurrency::OSThread
     // Implementations of various commands, called from doTask().
     void handleSetOn(bool on);
     void handleOnPress();
+    void handleShowNextFrame();
+    void handleShowPrevFrame();
     void handleStartBluetoothPinScreen(uint32_t pin);
     void handlePrint(const char *text);
     void handleStartFirmwareUpdateScreen();
@@ -380,7 +389,7 @@ class Screen : public concurrency::OSThread
     SH1106Wire dispdev;
 #elif defined(USE_SSD1306)
     SSD1306Wire dispdev;
-#elif defined(ST7735_CS) || defined(ILI9341_DRIVER)
+#elif defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ST7789_CS)
     TFTDisplay dispdev;
 #elif defined(USE_EINK)
     EInkDisplay dispdev;
@@ -394,4 +403,4 @@ class Screen : public concurrency::OSThread
 };
 
 } // namespace graphics
-#endif
+#endif

src/graphics/TFTDisplay.cpp

@@ -1,12 +1,233 @@
 #include "configuration.h"
 
-#if defined(ST7735_CS) || defined(ILI9341_DRIVER)
+#ifndef TFT_BACKLIGHT_ON
+#define TFT_BACKLIGHT_ON HIGH
+#endif
+
+// convert 24-bit color to 16-bit (56K)
+#define COLOR565(r, g, b) (((r & 0xF8) << 8) | ((g & 0xFC) << 3) | ((b & 0xF8) >> 3))
+#define TFT_MESH COLOR565(0x67, 0xEA, 0x94)
+
+#if defined(ST7735S)
+#include <LovyanGFX.hpp> // Graphics and font library for ST7735 driver chip
+
+#if defined(ST7735_BACKLIGHT_EN) && !defined(TFT_BL)
+#define TFT_BL ST7735_BACKLIGHT_EN
+#endif
+
+class LGFX : public lgfx::LGFX_Device
+{
+    lgfx::Panel_ST7735S _panel_instance;
+    lgfx::Bus_SPI _bus_instance;
+    lgfx::Light_PWM _light_instance;
+
+  public:
+    LGFX(void)
+    {
+        {
+            auto cfg = _bus_instance.config();
+
+            // configure SPI
+            cfg.spi_host = ST7735_SPI_HOST; // ESP32-S2,S3,C3 : SPI2_HOST or SPI3_HOST / ESP32 : VSPI_HOST or HSPI_HOST
+            cfg.spi_mode = 0;
+            cfg.freq_write = SPI_FREQUENCY; // SPI clock for transmission (up to 80MHz, rounded to the value obtained by dividing
+                                            // 80MHz by an integer)
+            cfg.freq_read = SPI_READ_FREQUENCY; // SPI clock when receiving
+            cfg.spi_3wire = false;              // Set to true if reception is done on the MOSI pin
+            cfg.use_lock = true;                // Set to true to use transaction locking
+            cfg.dma_channel = SPI_DMA_CH_AUTO;  // SPI_DMA_CH_AUTO; // Set DMA channel to use (0=not use DMA / 1=1ch / 2=ch /
+                                                // SPI_DMA_CH_AUTO=auto setting)
+            cfg.pin_sclk = ST7735_SCK;          // Set SPI SCLK pin number
+            cfg.pin_mosi = ST7735_SDA;          // Set SPI MOSI pin number
+            cfg.pin_miso = ST7735_MISO;         // Set SPI MISO pin number (-1 = disable)
+            cfg.pin_dc = ST7735_RS;             // Set SPI DC pin number (-1 = disable)
+
+            _bus_instance.config(cfg);              // applies the set value to the bus.
+            _panel_instance.setBus(&_bus_instance); // set the bus on the panel.
+        }
+
+        {                                        // Set the display panel control.
+            auto cfg = _panel_instance.config(); // Gets a structure for display panel settings.
+
+            cfg.pin_cs = ST7735_CS;     // Pin number where CS is connected (-1 = disable)
+            cfg.pin_rst = ST7735_RESET; // Pin number where RST is connected  (-1 = disable)
+            cfg.pin_busy = ST7735_BUSY; // Pin number where BUSY is connected (-1 = disable)
+
+            // The following setting values ​​are general initial values ​​for each panel, so please comment out any
+            // unknown items and try them.
+
+            cfg.panel_width = TFT_WIDTH;   // actual displayable width
+            cfg.panel_height = TFT_HEIGHT; // actual displayable height
+            cfg.offset_x = TFT_OFFSET_X;   // Panel offset amount in X direction
+            cfg.offset_y = TFT_OFFSET_Y;   // Panel offset amount in Y direction
+            cfg.offset_rotation = 0;       // Rotation direction value offset 0~7 (4~7 is upside down)
+            cfg.dummy_read_pixel = 8;      // Number of bits for dummy read before pixel readout
+            cfg.dummy_read_bits = 1;       // Number of bits for dummy read before non-pixel data read
+            cfg.readable = true;           // Set to true if data can be read
+            cfg.invert = true;             // Set to true if the light/darkness of the panel is reversed
+            cfg.rgb_order = false;         // Set to true if the panel's red and blue are swapped
+            cfg.dlen_16bit =
+                false;             // Set to true for panels that transmit data length in 16-bit units with 16-bit parallel or SPI
+            cfg.bus_shared = true; // If the bus is shared with the SD card, set to true (bus control with drawJpgFile etc.)
+
+            // Set the following only when the display is shifted with a driver with a variable number of pixels, such as the
+            // ST7735 or ILI9163.
+            cfg.memory_width = TFT_WIDTH;   // Maximum width supported by the driver IC
+            cfg.memory_height = TFT_HEIGHT; // Maximum height supported by the driver IC
+            _panel_instance.config(cfg);
+        }
+
+        // Set the backlight control
+        {
+            auto cfg = _light_instance.config(); // Gets a structure for backlight settings.
+
+            cfg.pin_bl = ST7735_BL; // Pin number to which the backlight is connected
+            cfg.invert = true;      // true to invert the brightness of the backlight
+            // cfg.freq = 44100;    // PWM frequency of backlight
+            // cfg.pwm_channel = 1; // PWM channel number to use
+
+            _light_instance.config(cfg);
+            _panel_instance.setLight(&_light_instance); // Set the backlight on the panel.
+        }
+
+        setPanel(&_panel_instance);
+    }
+};
+
+static LGFX tft;
+
+#elif defined(ST7789_CS)
+#include <LovyanGFX.hpp> // Graphics and font library for ST7735 driver chip
+
+#if defined(ST7789_BACKLIGHT_EN) && !defined(TFT_BL)
+#define TFT_BL ST7789_BACKLIGHT_EN
+#endif
+
+class LGFX : public lgfx::LGFX_Device
+{
+    lgfx::Panel_ST7789 _panel_instance;
+    lgfx::Bus_SPI _bus_instance;
+    lgfx::Light_PWM _light_instance;
+#ifdef T_WATCH_S3
+    lgfx::Touch_FT5x06 _touch_instance;
+#else
+    lgfx::Touch_GT911 _touch_instance;
+#endif
+
+  public:
+    LGFX(void)
+    {
+        {
+            auto cfg = _bus_instance.config();
+
+            // SPI
+            cfg.spi_host = ST7789_SPI_HOST;
+            cfg.spi_mode = 0;
+            cfg.freq_write = SPI_FREQUENCY; // SPI clock for transmission (up to 80MHz, rounded to the value obtained by dividing
+                                            // 80MHz by an integer)
+            cfg.freq_read = SPI_READ_FREQUENCY; // SPI clock when receiving
+            cfg.spi_3wire = false;              // Set to true if reception is done on the MOSI pin
+            cfg.use_lock = true;                // Set to true to use transaction locking
+            cfg.dma_channel = SPI_DMA_CH_AUTO;  // SPI_DMA_CH_AUTO; // Set DMA channel to use (0=not use DMA / 1=1ch / 2=ch /
+            cfg.pin_sclk = ST7789_SCK;          // Set SPI SCLK pin number
+            cfg.pin_mosi = ST7789_SDA;          // Set SPI MOSI pin number
+            cfg.pin_miso = ST7789_MISO;         // Set SPI MISO pin number (-1 = disable)
+            cfg.pin_dc = ST7789_RS;             // Set SPI DC pin number (-1 = disable)
+
+            _bus_instance.config(cfg);              // applies the set value to the bus.
+            _panel_instance.setBus(&_bus_instance); // set the bus on the panel.
+        }
+
+        {                                        // Set the display panel control.
+            auto cfg = _panel_instance.config(); // Gets a structure for display panel settings.
+
+            cfg.pin_cs = ST7789_CS; // Pin number where CS is connected (-1 = disable)
+            cfg.pin_rst = -1;       // Pin number where RST is connected  (-1 = disable)
+            cfg.pin_busy = -1;      // Pin number where BUSY is connected (-1 = disable)
+
+            // The following setting values ​​are general initial values ​​for each panel, so please comment out any
+            // unknown items and try them.
+
+            cfg.panel_width = TFT_WIDTH;   // actual displayable width
+            cfg.panel_height = TFT_HEIGHT; // actual displayable height
+            cfg.offset_x = TFT_OFFSET_X;   // Panel offset amount in X direction
+            cfg.offset_y = TFT_OFFSET_Y;   // Panel offset amount in Y direction
+            cfg.offset_rotation = 0;       // Rotation direction value offset 0~7 (4~7 is mirrored)
+            cfg.dummy_read_pixel = 9;      // Number of bits for dummy read before pixel readout
+            cfg.dummy_read_bits = 1;       // Number of bits for dummy read before non-pixel data read
+            cfg.readable = true;           // Set to true if data can be read
+            cfg.invert = true;             // Set to true if the light/darkness of the panel is reversed
+            cfg.rgb_order = false;         // Set to true if the panel's red and blue are swapped
+            cfg.dlen_16bit =
+                false;             // Set to true for panels that transmit data length in 16-bit units with 16-bit parallel or SPI
+            cfg.bus_shared = true; // If the bus is shared with the SD card, set to true (bus control with drawJpgFile etc.)
+
+            // Set the following only when the display is shifted with a driver with a variable number of pixels, such as the
+            // ST7735 or ILI9163.
+            // cfg.memory_width = TFT_WIDTH;   // Maximum width supported by the driver IC
+            // cfg.memory_height = TFT_HEIGHT; // Maximum height supported by the driver IC
+            _panel_instance.config(cfg);
+        }
+
+        // Set the backlight control. (delete if not necessary)
+        {
+            auto cfg = _light_instance.config(); // Gets a structure for backlight settings.
+
+            cfg.pin_bl = ST7789_BL; // Pin number to which the backlight is connected
+            cfg.invert = false;     // true to invert the brightness of the backlight
+            // cfg.pwm_channel = 0;
+
+            _light_instance.config(cfg);
+            _panel_instance.setLight(&_light_instance); // Set the backlight on the panel.
+        }
+
+        // Configure settings for touch screen control.
+        {
+            auto cfg = _touch_instance.config();
+
+            cfg.pin_cs = -1;
+            cfg.x_min = 0;
+            cfg.x_max = TFT_HEIGHT - 1;
+            cfg.y_min = 0;
+            cfg.y_max = TFT_WIDTH - 1;
+            cfg.pin_int = SCREEN_TOUCH_INT;
+            cfg.bus_shared = true;
+            cfg.offset_rotation = 0;
+            // cfg.freq = 2500000;
+
+            // I2C
+            cfg.i2c_port = TOUCH_I2C_PORT;
+            cfg.i2c_addr = TOUCH_SLAVE_ADDRESS;
+#ifdef SCREEN_TOUCH_USE_I2C1
+            cfg.pin_sda = I2C_SDA1;
+            cfg.pin_scl = I2C_SCL1;
+#else
+            cfg.pin_sda = I2C_SDA;
+            cfg.pin_scl = I2C_SCL;
+#endif
+            // cfg.freq = 400000;
+
+            _touch_instance.config(cfg);
+            _panel_instance.setTouch(&_touch_instance);
+        }
+
+        setPanel(&_panel_instance); // Sets the panel to use.
+    }
+};
+
+static LGFX tft;
+
+#elif defined(ST7735_CS) || defined(ILI9341_DRIVER)
+#include <TFT_eSPI.h> // Graphics and font library for ILI9341 driver chip
+
+static TFT_eSPI tft = TFT_eSPI(); // Invoke library, pins defined in User_Setup.h
+
+#endif
+
+#if defined(ST7735_CS) || defined(ST7789_CS) || defined(ILI9341_DRIVER)
 #include "SPILock.h"
 #include "TFTDisplay.h"
 #include <SPI.h>
-#include <TFT_eSPI.h> // Graphics and font library for ST7735 driver chip
-
-static TFT_eSPI tft = TFT_eSPI(); // Invoke library, pins defined in User_Setup.h
 
 TFTDisplay::TFTDisplay(uint8_t address, int sda, int scl, OLEDDISPLAY_GEOMETRY geometry, HW_I2C i2cBus)
 {
@@ -30,7 +251,7 @@ void TFTDisplay::display(void)
             auto isset = buffer[x + (y / 8) * displayWidth] & (1 << (y & 7));
             auto dblbuf_isset = buffer_back[x + (y / 8) * displayWidth] & (1 << (y & 7));
             if (isset != dblbuf_isset) {
-                tft.drawPixel(x, y, isset ? TFT_WHITE : TFT_BLACK);
+                tft.drawPixel(x, y, isset ? TFT_MESH : TFT_BLACK);
             }
         }
     }
@@ -46,8 +267,55 @@ void TFTDisplay::display(void)
 // Send a command to the display (low level function)
 void TFTDisplay::sendCommand(uint8_t com)
 {
-    (void)com;
-    // Drop all commands to device (we just update the buffer)
+    // handle display on/off directly
+    switch (com) {
+    case DISPLAYON: {
+#if defined(TFT_BL) && defined(TFT_BACKLIGHT_ON)
+        digitalWrite(TFT_BL, TFT_BACKLIGHT_ON);
+#endif
+#ifdef VTFT_CTRL
+        digitalWrite(VTFT_CTRL, LOW);
+#endif
+#ifndef M5STACK
+        tft.setBrightness(128);
+#endif
+        break;
+    }
+    case DISPLAYOFF: {
+#if defined(TFT_BL) && defined(TFT_BACKLIGHT_ON)
+        digitalWrite(TFT_BL, !TFT_BACKLIGHT_ON);
+#endif
+#ifdef VTFT_CTRL
+        digitalWrite(VTFT_CTRL, HIGH);
+#endif
+#ifndef M5STACK
+        tft.setBrightness(0);
+#endif
+        break;
+    }
+    default:
+        break;
+    }
+
+    // Drop all other commands to device (we just update the buffer)
+}
+
+bool TFTDisplay::hasTouch(void)
+{
+#ifndef M5STACK
+    return tft.touch() != nullptr;
+#else
+    return false;
+#endif
+}
+
+bool TFTDisplay::getTouch(int16_t *x, int16_t *y)
+{
+#ifndef M5STACK
+    return tft.getTouch(x, y);
+#else
+    return false;
+#endif
 }
 
 void TFTDisplay::setDetected(uint8_t detected)
@@ -62,23 +330,20 @@ bool TFTDisplay::connect()
     LOG_INFO("Doing TFT init\n");
 
 #ifdef TFT_BL
-    digitalWrite(TFT_BL, HIGH);
+    digitalWrite(TFT_BL, TFT_BACKLIGHT_ON);
     pinMode(TFT_BL, OUTPUT);
 #endif
 
-#ifdef ST7735_BACKLIGHT_EN
-    digitalWrite(ST7735_BACKLIGHT_EN, HIGH);
-    pinMode(ST7735_BACKLIGHT_EN, OUTPUT);
-#endif
     tft.init();
-#ifdef M5STACK
-    tft.setRotation(1); // M5Stack has the TFT in landscape
+#if defined(M5STACK) || defined(T_DECK)
+    tft.setRotation(1); // M5Stack/T-Deck have the TFT in landscape
+#elif defined(T_WATCH_S3)
+    tft.setRotation(0); // T-Watch S3 has the TFT in portrait
 #else
     tft.setRotation(3); // Orient horizontal and wide underneath the silkscreen name label
 #endif
     tft.fillScreen(TFT_BLACK);
-    // tft.drawRect(0, 0, 40, 10, TFT_PURPLE); // wide rectangle in upper left
     return true;
 }
 
-#endif
+#endif

src/graphics/TFTDisplay.h

@@ -7,7 +7,6 @@
  *
  * Remaining TODO:
  * optimize display() to only draw changed pixels (see other OLED subclasses for examples)
- * implement displayOn/displayOff to turn off the TFT device (and backlight)
  * Use the fast NRF52 SPI API rather than the slow standard arduino version
  *
  * turn radio back on - currently with both on spi bus is fucked? or are we leaving chip select asserted?
@@ -23,6 +22,10 @@ class TFTDisplay : public OLEDDisplay
     // Write the buffer to the display memory
     virtual void display(void) override;
 
+    // Touch screen (static handlers)
+    static bool hasTouch(void);
+    static bool getTouch(int16_t *x, int16_t *y);
+
     /**
      * shim to make the abstraction happy
      *
@@ -38,4 +41,4 @@ class TFTDisplay : public OLEDDisplay
 
     // Connect to the display
     virtual bool connect() override;
-};
+};

src/graphics/images.h

@@ -14,7 +14,7 @@ const uint8_t imgUser[] PROGMEM = {0x3C, 0x42, 0x99, 0xA5, 0xA5, 0x99, 0x42, 0x3
 const uint8_t imgPositionEmpty[] PROGMEM = {0x20, 0x30, 0x28, 0x24, 0x42, 0xFF};
 const uint8_t imgPositionSolid[] PROGMEM = {0x20, 0x30, 0x38, 0x3C, 0x7E, 0xFF};
 
-#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS)
+#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS)
 const uint8_t imgQuestionL1[] PROGMEM = {0xff, 0x01, 0x01, 0x32, 0x7b, 0x49, 0x49, 0x6f, 0x26, 0x01, 0x01, 0xff};
 const uint8_t imgQuestionL2[] PROGMEM = {0x0f, 0x08, 0x08, 0x08, 0x06, 0x0f, 0x0f, 0x06, 0x08, 0x08, 0x08, 0x0f};
 const uint8_t imgInfoL1[] PROGMEM = {0xff, 0x01, 0x01, 0x01, 0x1e, 0x7f, 0x1e, 0x01, 0x01, 0x01, 0x01, 0xff};

src/input/TouchScreenBase.cpp

@@ -0,0 +1,137 @@
+#include "TouchScreenBase.h"
+#include "main.h"
+
+#ifndef TIME_LONG_PRESS
+#define TIME_LONG_PRESS 400
+#endif
+
+// move a minimum distance over the screen to detect a "swipe"
+#ifndef TOUCH_THRESHOLD_X
+#define TOUCH_THRESHOLD_X 30
+#endif
+
+#ifndef TOUCH_THRESHOLD_Y
+#define TOUCH_THRESHOLD_Y 20
+#endif
+
+TouchScreenBase::TouchScreenBase(const char *name, uint16_t width, uint16_t height)
+    : concurrency::OSThread(name), _display_width(width), _display_height(height), _first_x(0), _last_x(0), _first_y(0),
+      _last_y(0), _start(0), _tapped(false), _originName(name)
+{
+}
+
+void TouchScreenBase::init(bool hasTouch)
+{
+    if (hasTouch) {
+        LOG_INFO("TouchScreen initialized %d %d\n", TOUCH_THRESHOLD_X, TOUCH_THRESHOLD_Y);
+        this->setInterval(100);
+    } else {
+        disable();
+        this->setInterval(UINT_MAX);
+    }
+}
+
+int32_t TouchScreenBase::runOnce()
+{
+    TouchEvent e;
+    e.touchEvent = static_cast<char>(TOUCH_ACTION_NONE);
+
+    // process touch events
+    int16_t x, y;
+    bool touched = getTouch(x, y);
+    if (touched) {
+        hapticFeedback();
+        this->setInterval(20);
+        _last_x = x;
+        _last_y = y;
+    }
+    if (touched != _touchedOld) {
+        if (touched) {
+            _state = TOUCH_EVENT_OCCURRED;
+            _start = millis();
+            _first_x = x;
+            _first_y = y;
+        } else {
+            _state = TOUCH_EVENT_CLEARED;
+            time_t duration = millis() - _start;
+            x = _last_x;
+            y = _last_y;
+            this->setInterval(50);
+
+            // compute distance
+            int16_t dx = x - _first_x;
+            int16_t dy = y - _first_y;
+            uint16_t adx = abs(dx);
+            uint16_t ady = abs(dy);
+
+            // swipe horizontal
+            if (adx > ady && adx > TOUCH_THRESHOLD_X) {
+                if (0 > dx) { // swipe right to left
+                    e.touchEvent = static_cast<char>(TOUCH_ACTION_LEFT);
+                    LOG_DEBUG("action SWIPE: right to left\n");
+                } else { // swipe left to right
+                    e.touchEvent = static_cast<char>(TOUCH_ACTION_RIGHT);
+                    LOG_DEBUG("action SWIPE: left to right\n");
+                }
+            }
+            // swipe vertical
+            else if (ady > adx && ady > TOUCH_THRESHOLD_Y) {
+                if (0 > dy) { // swipe bottom to top
+                    e.touchEvent = static_cast<char>(TOUCH_ACTION_UP);
+                    LOG_DEBUG("action SWIPE: bottom to top\n");
+                } else { // swipe top to bottom
+                    e.touchEvent = static_cast<char>(TOUCH_ACTION_DOWN);
+                    LOG_DEBUG("action SWIPE: top to bottom\n");
+                }
+            }
+            // tap
+            else {
+                if (duration > 0 && duration < TIME_LONG_PRESS) {
+                    if (_tapped) {
+                        _tapped = false;
+                        e.touchEvent = static_cast<char>(TOUCH_ACTION_DOUBLE_TAP);
+                        LOG_DEBUG("action DOUBLE TAP(%d/%d)\n", x, y);
+                    } else {
+                        _tapped = true;
+                    }
+                } else {
+                    _tapped = false;
+                }
+            }
+        }
+    }
+    _touchedOld = touched;
+
+    // fire TAP event when no 2nd tap occured within time
+    if (_tapped && (time_t(millis()) - _start) > TIME_LONG_PRESS - 50) {
+        _tapped = false;
+        e.touchEvent = static_cast<char>(TOUCH_ACTION_TAP);
+        LOG_DEBUG("action TAP(%d/%d)\n", _last_x, _last_y);
+    }
+
+    // fire LONG_PRESS event without the need for release
+    if (touched && (time_t(millis()) - _start) > TIME_LONG_PRESS) {
+        // tricky: prevent reoccurring events and another touch event when releasing
+        _start = millis() + 30000;
+        e.touchEvent = static_cast<char>(TOUCH_ACTION_LONG_PRESS);
+        LOG_DEBUG("action LONG PRESS(%d/%d)\n", _last_x, _last_y);
+    }
+
+    if (e.touchEvent != TOUCH_ACTION_NONE) {
+        e.source = this->_originName;
+        e.x = _last_x;
+        e.y = _last_y;
+        onEvent(e);
+    }
+
+    return interval;
+}
+
+void TouchScreenBase::hapticFeedback()
+{
+#ifdef T_WATCH_S3
+    drv.setWaveform(0, 75);
+    drv.setWaveform(1, 0); // end waveform
+    drv.go();
+#endif
+}

src/input/TouchScreenBase.h

@@ -0,0 +1,55 @@
+#pragma once
+
+#include "InputBroker.h"
+#include "concurrency/OSThread.h"
+#include "mesh/NodeDB.h"
+
+typedef struct _TouchEvent {
+    const char *source;
+    char touchEvent;
+    uint16_t x;
+    uint16_t y;
+} TouchEvent;
+
+class TouchScreenBase : public Observable<const InputEvent *>, public concurrency::OSThread
+{
+  public:
+    explicit TouchScreenBase(const char *name, uint16_t width, uint16_t height);
+    void init(bool hasTouch);
+
+  protected:
+    enum TouchScreenBaseStateType { TOUCH_EVENT_OCCURRED, TOUCH_EVENT_CLEARED };
+
+    enum TouchScreenBaseEventType {
+        TOUCH_ACTION_NONE,
+        TOUCH_ACTION_UP,
+        TOUCH_ACTION_DOWN,
+        TOUCH_ACTION_LEFT,
+        TOUCH_ACTION_RIGHT,
+        TOUCH_ACTION_TAP,
+        TOUCH_ACTION_DOUBLE_TAP,
+        TOUCH_ACTION_LONG_PRESS
+    };
+
+    virtual int32_t runOnce() override;
+
+    virtual bool getTouch(int16_t &x, int16_t &y) = 0;
+    virtual void onEvent(const TouchEvent &event) = 0;
+
+    volatile TouchScreenBaseStateType _state = TOUCH_EVENT_CLEARED;
+    volatile TouchScreenBaseEventType _action = TOUCH_ACTION_NONE;
+    void hapticFeedback();
+
+  protected:
+    uint16_t _display_width;
+    uint16_t _display_height;
+
+  private:
+    bool _touchedOld = false;  // previous touch state
+    int16_t _first_x, _last_x; // horizontal swipe direction
+    int16_t _first_y, _last_y; // vertical swipe direction
+    time_t _start;             // for LONG_PRESS
+    bool _tapped;              // for DOUBLE_TAP
+
+    const char *_originName;
+};

src/input/TouchScreenImpl1.cpp

@@ -0,0 +1,68 @@
+#include "TouchScreenImpl1.h"
+#include "InputBroker.h"
+#include "configuration.h"
+
+TouchScreenImpl1 *touchScreenImpl1;
+
+TouchScreenImpl1::TouchScreenImpl1(uint16_t width, uint16_t height, bool (*getTouch)(int16_t *, int16_t *))
+    : TouchScreenBase("touchscreen1", width, height), _getTouch(getTouch)
+{
+}
+
+void TouchScreenImpl1::init()
+{
+#if !HAS_TOUCHSCREEN
+    TouchScreenBase::init(false);
+    return;
+#else
+    TouchScreenBase::init(true);
+    inputBroker->registerSource(this);
+#endif
+}
+
+bool TouchScreenImpl1::getTouch(int16_t &x, int16_t &y)
+{
+    return _getTouch(&x, &y);
+}
+
+/**
+ * @brief forward touchscreen event
+ *
+ * @param event
+ *
+ * The touchscreen events are translated to input events and reversed
+ */
+void TouchScreenImpl1::onEvent(const TouchEvent &event)
+{
+    InputEvent e;
+    e.source = event.source;
+    switch (event.touchEvent) {
+    case TOUCH_ACTION_LEFT: {
+        e.inputEvent = static_cast<char>(meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_RIGHT);
+        break;
+    }
+    case TOUCH_ACTION_RIGHT: {
+        e.inputEvent = static_cast<char>(meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_LEFT);
+        break;
+    }
+    case TOUCH_ACTION_UP: {
+        e.inputEvent = static_cast<char>(meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_UP);
+        break;
+    }
+    case TOUCH_ACTION_DOWN: {
+        e.inputEvent = static_cast<char>(meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_DOWN);
+        break;
+    }
+    case TOUCH_ACTION_DOUBLE_TAP: {
+        e.inputEvent = static_cast<char>(meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_SELECT);
+        break;
+    }
+    case TOUCH_ACTION_LONG_PRESS: {
+        e.inputEvent = static_cast<char>(meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_CANCEL);
+        break;
+    }
+    default:
+        return;
+    }
+    this->notifyObservers(&e);
+}

src/input/TouchScreenImpl1.h

@@ -0,0 +1,17 @@
+#pragma once
+#include "TouchScreenBase.h"
+
+class TouchScreenImpl1 : public TouchScreenBase
+{
+  public:
+    TouchScreenImpl1(uint16_t width, uint16_t height, bool (*getTouch)(int16_t *, int16_t *));
+    void init(void);
+
+  protected:
+    virtual bool getTouch(int16_t &x, int16_t &y);
+    virtual void onEvent(const TouchEvent &event);
+
+    bool (*_getTouch)(int16_t *, int16_t *);
+};
+
+extern TouchScreenImpl1 *touchScreenImpl1;

src/input/TrackballInterruptBase.cpp

@@ -0,0 +1,78 @@
+#include "TrackballInterruptBase.h"
+#include "configuration.h"
+
+TrackballInterruptBase::TrackballInterruptBase(const char *name)
+{
+    this->_originName = name;
+}
+
+void TrackballInterruptBase::init(uint8_t pinDown, uint8_t pinUp, uint8_t pinLeft, uint8_t pinRight, uint8_t pinPress,
+                                  char eventDown, char eventUp, char eventLeft, char eventRight, char eventPressed,
+                                  void (*onIntDown)(), void (*onIntUp)(), void (*onIntLeft)(), void (*onIntRight)(),
+                                  void (*onIntPress)())
+{
+    this->_pinDown = pinDown;
+    this->_pinUp = pinUp;
+    this->_pinLeft = pinLeft;
+    this->_pinRight = pinRight;
+    this->_eventDown = eventDown;
+    this->_eventUp = eventUp;
+    this->_eventLeft = eventLeft;
+    this->_eventRight = eventRight;
+    this->_eventPressed = eventPressed;
+
+    pinMode(pinPress, INPUT_PULLUP);
+    pinMode(this->_pinDown, INPUT_PULLUP);
+    pinMode(this->_pinUp, INPUT_PULLUP);
+    pinMode(this->_pinLeft, INPUT_PULLUP);
+    pinMode(this->_pinRight, INPUT_PULLUP);
+
+    attachInterrupt(pinPress, onIntPress, RISING);
+    attachInterrupt(this->_pinDown, onIntDown, RISING);
+    attachInterrupt(this->_pinUp, onIntUp, RISING);
+    attachInterrupt(this->_pinLeft, onIntLeft, RISING);
+    attachInterrupt(this->_pinRight, onIntRight, RISING);
+
+    LOG_DEBUG("Trackball GPIO initialized (%d, %d, %d, %d, %d)\n", this->_pinUp, this->_pinDown, this->_pinLeft, this->_pinRight,
+              pinPress);
+}
+
+void TrackballInterruptBase::intPressHandler()
+{
+    InputEvent e;
+    e.source = this->_originName;
+    e.inputEvent = this->_eventPressed;
+    this->notifyObservers(&e);
+}
+
+void TrackballInterruptBase::intDownHandler()
+{
+    InputEvent e;
+    e.source = this->_originName;
+    e.inputEvent = this->_eventDown;
+    this->notifyObservers(&e);
+}
+
+void TrackballInterruptBase::intUpHandler()
+{
+    InputEvent e;
+    e.source = this->_originName;
+    e.inputEvent = this->_eventUp;
+    this->notifyObservers(&e);
+}
+
+void TrackballInterruptBase::intLeftHandler()
+{
+    InputEvent e;
+    e.source = this->_originName;
+    e.inputEvent = this->_eventLeft;
+    this->notifyObservers(&e);
+}
+
+void TrackballInterruptBase::intRightHandler()
+{
+    InputEvent e;
+    e.source = this->_originName;
+    e.inputEvent = this->_eventRight;
+    this->notifyObservers(&e);
+}

src/input/TrackballInterruptBase.h

@@ -0,0 +1,30 @@
+#pragma once
+
+#include "InputBroker.h"
+#include "mesh/NodeDB.h"
+
+class TrackballInterruptBase : public Observable<const InputEvent *>
+{
+  public:
+    explicit TrackballInterruptBase(const char *name);
+    void init(uint8_t pinDown, uint8_t pinUp, uint8_t pinLeft, uint8_t pinRight, uint8_t pinPress, char eventDown, char eventUp,
+              char eventLeft, char eventRight, char eventPressed, void (*onIntDown)(), void (*onIntUp)(), void (*onIntLeft)(),
+              void (*onIntRight)(), void (*onIntPress)());
+    void intPressHandler();
+    void intDownHandler();
+    void intUpHandler();
+    void intLeftHandler();
+    void intRightHandler();
+
+  private:
+    uint8_t _pinDown = 0;
+    uint8_t _pinUp = 0;
+    uint8_t _pinLeft = 0;
+    uint8_t _pinRight = 0;
+    char _eventDown = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_NONE;
+    char _eventUp = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_NONE;
+    char _eventLeft = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_NONE;
+    char _eventRight = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_NONE;
+    char _eventPressed = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_NONE;
+    const char *_originName;
+};

src/input/TrackballInterruptImpl1.cpp

@@ -0,0 +1,54 @@
+#include "TrackballInterruptImpl1.h"
+#include "InputBroker.h"
+#include "configuration.h"
+
+TrackballInterruptImpl1 *trackballInterruptImpl1;
+
+TrackballInterruptImpl1::TrackballInterruptImpl1() : TrackballInterruptBase("trackball1") {}
+
+void TrackballInterruptImpl1::init()
+{
+#if !HAS_TRACKBALL
+    // Input device is disabled.
+    return;
+#else
+    uint8_t pinUp = TB_UP;
+    uint8_t pinDown = TB_DOWN;
+    uint8_t pinLeft = TB_LEFT;
+    uint8_t pinRight = TB_RIGHT;
+    uint8_t pinPress = TB_PRESS;
+
+    char eventDown = static_cast<char>(meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_DOWN);
+    char eventUp = static_cast<char>(meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_UP);
+    char eventLeft = static_cast<char>(meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_LEFT);
+    char eventRight = static_cast<char>(meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_RIGHT);
+    char eventPressed = static_cast<char>(meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_SELECT);
+
+    TrackballInterruptBase::init(pinDown, pinUp, pinLeft, pinRight, pinPress, eventDown, eventUp, eventLeft, eventRight,
+                                 eventPressed, TrackballInterruptImpl1::handleIntDown, TrackballInterruptImpl1::handleIntUp,
+                                 TrackballInterruptImpl1::handleIntLeft, TrackballInterruptImpl1::handleIntRight,
+                                 TrackballInterruptImpl1::handleIntPressed);
+    inputBroker->registerSource(this);
+#endif
+}
+
+void TrackballInterruptImpl1::handleIntDown()
+{
+    trackballInterruptImpl1->intDownHandler();
+}
+void TrackballInterruptImpl1::handleIntUp()
+{
+    trackballInterruptImpl1->intUpHandler();
+}
+void TrackballInterruptImpl1::handleIntLeft()
+{
+    trackballInterruptImpl1->intLeftHandler();
+}
+void TrackballInterruptImpl1::handleIntRight()
+{
+    trackballInterruptImpl1->intRightHandler();
+}
+void TrackballInterruptImpl1::handleIntPressed()
+{
+    trackballInterruptImpl1->intPressHandler();
+}

src/input/TrackballInterruptImpl1.h

@@ -0,0 +1,16 @@
+#pragma once
+#include "TrackballInterruptBase.h"
+
+class TrackballInterruptImpl1 : public TrackballInterruptBase
+{
+  public:
+    TrackballInterruptImpl1();
+    void init();
+    static void handleIntDown();
+    static void handleIntUp();
+    static void handleIntLeft();
+    static void handleIntRight();
+    static void handleIntPressed();
+};
+
+extern TrackballInterruptImpl1 *trackballInterruptImpl1;

src/input/UpDownInterruptBase.cpp

@@ -23,7 +23,7 @@ void UpDownInterruptBase::init(uint8_t pinDown, uint8_t pinUp, uint8_t pinPress,
     attachInterrupt(this->_pinDown, onIntDown, RISING);
     attachInterrupt(this->_pinUp, onIntUp, RISING);
 
-    LOG_DEBUG("GPIO initialized (%d, %d, %d)\n", this->_pinDown, this->_pinUp, pinPress);
+    LOG_DEBUG("Up/down/press GPIO initialized (%d, %d, %d)\n", this->_pinUp, this->_pinDown, pinPress);
 }
 
 void UpDownInterruptBase::intPressHandler()

src/input/cardKbI2cImpl.cpp

@@ -7,7 +7,7 @@ CardKbI2cImpl::CardKbI2cImpl() : KbI2cBase("cardKB") {}
 
 void CardKbI2cImpl::init()
 {
-    if (cardkb_found.address != CARDKB_ADDR) {
+    if (cardkb_found.address != CARDKB_ADDR && cardkb_found.address != TDECK_KB_ADDR) {
         disable();
         return;
     }

src/input/kbI2cBase.cpp

@@ -41,7 +41,7 @@ void write_to_14004(const TwoWire * i2cBus, uint8_t reg, uint8_t data)
 
 int32_t KbI2cBase::runOnce()
 {
-    if (cardkb_found.address != CARDKB_ADDR) {
+    if (cardkb_found.address != CARDKB_ADDR && cardkb_found.address != TDECK_KB_ADDR) {
         // Input device is not detected.
         return INT32_MAX;
     }
@@ -85,9 +85,9 @@ int32_t KbI2cBase::runOnce()
             e.kbchar = PrintDataBuf;
             this->notifyObservers(&e);
         }
-    } else {
-        // m5 cardkb
-        i2cBus->requestFrom(CARDKB_ADDR, 1);
+    } else if (kb_model == 0x00 || kb_model == 0x10) {
+        // m5 cardkb and T-Deck
+        i2cBus->requestFrom(kb_model == 0x00 ? CARDKB_ADDR : TDECK_KB_ADDR, 1);
 
         while (i2cBus->available()) {
             char c = i2cBus->read();
@@ -132,6 +132,8 @@ int32_t KbI2cBase::runOnce()
                 this->notifyObservers(&e);
             }
         }
+    } else {
+        LOG_WARN("Unknown kb_model 0x%02x\n", kb_model);
     }
-    return 500;
+    return 300;
 }

src/main.cpp

@@ -19,6 +19,7 @@
 #include "detect/ScanI2CTwoWire.h"
 #include "detect/axpDebug.h"
 #include "detect/einkScan.h"
+#include "graphics/RAKled.h"
 #include "graphics/Screen.h"
 #include "main.h"
 #include "mesh/generated/meshtastic/config.pb.h"
@@ -46,19 +47,21 @@ NRF52Bluetooth *nrf52Bluetooth;
 
 #if HAS_WIFI
 #include "mesh/api/WiFiServerAPI.h"
-#include "mqtt/MQTT.h"
 #endif
 
 #if HAS_ETHERNET
 #include "mesh/api/ethServerAPI.h"
-#include "mqtt/MQTT.h"
 #endif
+#include "mqtt/MQTT.h"
 
 #include "LLCC68Interface.h"
 #include "RF95Interface.h"
 #include "SX1262Interface.h"
 #include "SX1268Interface.h"
 #include "SX1280Interface.h"
+#ifdef ARCH_STM32WL
+#include "STM32WLE5JCInterface.h"
+#endif
 #if !HAS_RADIO && defined(ARCH_PORTDUINO)
 #include "platform/portduino/SimRadio.h"
 #endif
@@ -68,7 +71,7 @@ NRF52Bluetooth *nrf52Bluetooth;
 #endif
 #include "PowerFSMThread.h"
 
-#if !defined(ARCH_PORTDUINO)
+#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
 #include "AccelerometerThread.h"
 #endif
 
@@ -93,18 +96,25 @@ ScanI2C::DeviceAddress screen_found = ScanI2C::ADDRESS_NONE;
 
 // The I2C address of the cardkb or RAK14004 (if found)
 ScanI2C::DeviceAddress cardkb_found = ScanI2C::ADDRESS_NONE;
-// 0x02 for RAK14004 and 0x00 for cardkb
+// 0x02 for RAK14004, 0x00 for cardkb, 0x10 for T-Deck
 uint8_t kb_model;
 
 // The I2C address of the RTC Module (if found)
 ScanI2C::DeviceAddress rtc_found = ScanI2C::ADDRESS_NONE;
 // The I2C address of the Accelerometer (if found)
 ScanI2C::DeviceAddress accelerometer_found = ScanI2C::ADDRESS_NONE;
+// The I2C address of the RGB LED (if found)
+ScanI2C::FoundDevice rgb_found = ScanI2C::FoundDevice(ScanI2C::DeviceType::NONE, ScanI2C::ADDRESS_NONE);
 
 #if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
 ATECCX08A atecc;
 #endif
 
+#ifdef T_WATCH_S3
+Adafruit_DRV2605 drv;
+#endif
+bool isVibrating = false;
+
 bool eink_found = true;
 
 uint32_t serialSinceMsec;
@@ -159,11 +169,12 @@ static OSThread *buttonThread;
 uint32_t ButtonThread::longPressTime = 0;
 #endif
 static OSThread *accelerometerThread;
+SPISettings spiSettings(4000000, MSBFIRST, SPI_MODE0);
 
 RadioInterface *rIf = NULL;
 
 /**
- * Some platforms (nrf52) might provide an alterate version that supresses calling delay from sleep.
+ * Some platforms (nrf52) might provide an alterate version that suppresses calling delay from sleep.
  */
 __attribute__((weak, noinline)) bool loopCanSleep()
 {
@@ -208,6 +219,16 @@ void setup()
     digitalWrite(VEXT_ENABLE, 0); // turn on the display power
 #endif
 
+#ifdef VGNSS_CTRL
+    pinMode(VGNSS_CTRL, OUTPUT);
+    digitalWrite(VGNSS_CTRL, LOW);
+#endif
+
+#if defined(VTFT_CTRL)
+    pinMode(VTFT_CTRL, OUTPUT);
+    digitalWrite(VTFT_CTRL, LOW);
+#endif
+
 #ifdef RESET_OLED
     pinMode(RESET_OLED, OUTPUT);
     digitalWrite(RESET_OLED, 1);
@@ -234,7 +255,18 @@ void setup()
 
     fsInit();
 
-    router = new ReliableRouter();
+#if defined(_SEEED_XIAO_NRF52840_SENSE_H_)
+
+    pinMode(CHARGE_LED, INPUT); // sets to detect if charge LED is on or off to see if USB is plugged in
+
+    pinMode(HICHG, OUTPUT);
+    digitalWrite(HICHG, LOW); // 100 mA charging current if set to LOW and 50mA (actually about 20mA) if set to HIGH
+
+    pinMode(BAT_READ, OUTPUT);
+    digitalWrite(BAT_READ, LOW); // This is pin P0_14 = 14 and by pullling low to GND it provices path to read on pin 32 (P0,31)
+                                 // PIN_VBAT the voltage from divider on XIAO board
+
+#endif
 
 #ifdef I2C_SDA1
     Wire1.begin(I2C_SDA1, I2C_SCL1);
@@ -256,10 +288,26 @@ void setup()
 #endif
 
 #ifdef RAK4630
+#ifdef PIN_3V3_EN
     // We need to enable 3.3V periphery in order to scan it
     pinMode(PIN_3V3_EN, OUTPUT);
     digitalWrite(PIN_3V3_EN, HIGH);
 #endif
+#ifndef USE_EINK
+    // RAK-12039 set pin for Air quality sensor
+    pinMode(AQ_SET_PIN, OUTPUT);
+    digitalWrite(AQ_SET_PIN, HIGH);
+#endif
+#endif
+
+#ifdef T_DECK
+    // enable keyboard
+    pinMode(KB_POWERON, OUTPUT);
+    digitalWrite(KB_POWERON, HIGH);
+    // There needs to be a delay after power on, give LILYGO-KEYBOARD some startup time
+    // otherwise keyboard and touch screen will not work
+    delay(800);
+#endif
 
     // Currently only the tbeam has a PMU
     // PMU initialization needs to be placed before i2c scanning
@@ -333,21 +381,41 @@ void setup()
             kb_model = 0x02;
             break;
         case ScanI2C::DeviceType::CARDKB:
+            kb_model = 0x00;
+            break;
+        case ScanI2C::DeviceType::TDECKKB:
+            // assign an arbitrary value to distinguish from other models
+            kb_model = 0x10;
+            break;
         default:
             // use this as default since it's also just zero
+            LOG_WARN("kb_info.type is unknown(0x%02x), setting kb_model=0x00\n", kb_info.type);
             kb_model = 0x00;
         }
     }
 
     pmu_found = i2cScanner->exists(ScanI2C::DeviceType::PMU_AXP192_AXP2101);
 
-    /*
-     * There are a bunch of sensors that have no further logic than to be found and stuffed into the
-     * nodeTelemetrySensorsMap singleton. This wraps that logic in a temporary scope to declare the temporary field
-     * "found".
-     */
+/*
+ * There are a bunch of sensors that have no further logic than to be found and stuffed into the
+ * nodeTelemetrySensorsMap singleton. This wraps that logic in a temporary scope to declare the temporary field
+ * "found".
+ */
 
-#if !defined(ARCH_PORTDUINO)
+// Only one supported RGB LED currently
+#ifdef HAS_NCP5623
+    rgb_found = i2cScanner->find(ScanI2C::DeviceType::NCP5623);
+
+    // Start the RGB LED at 50%
+
+    if (rgb_found.type == ScanI2C::NCP5623) {
+        rgb.begin();
+        rgb.setCurrent(10);
+        rgb.setColor(128, 128, 128);
+    }
+#endif
+
+#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
     auto acc_info = i2cScanner->firstAccelerometer();
     accelerometer_found = acc_info.type != ScanI2C::DeviceType::NONE ? acc_info.address : accelerometer_found;
     LOG_DEBUG("acc_info = %i\n", acc_info.type);
@@ -406,6 +474,11 @@ void setup()
 #ifdef ARCH_NRF52
     nrf52Setup();
 #endif
+
+#ifdef ARCH_RP2040
+    rp2040Setup();
+#endif
+
     // We do this as early as possible because this loads preferences from flash
     // but we need to do this after main cpu iniot (esp32setup), because we need the random seed set
     nodeDB.init();
@@ -413,6 +486,8 @@ void setup()
     // If we're taking on the repeater role, use flood router
     if (config.device.role == meshtastic_Config_DeviceConfig_Role_REPEATER)
         router = new FloodingRouter();
+    else
+        router = new ReliableRouter();
 
 #if HAS_BUTTON
     // Buttons. Moved here cause we need NodeDB to be initialized
@@ -434,15 +509,38 @@ void setup()
     screen_model = meshtastic_Config_DisplayConfig_OledType_OLED_SH1107; // keep dimension of 128x64
 #endif
 
-#if !defined(ARCH_PORTDUINO)
+#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
     if (acc_info.type != ScanI2C::DeviceType::NONE) {
+        config.display.wake_on_tap_or_motion = true;
+        moduleConfig.external_notification.enabled = true;
         accelerometerThread = new AccelerometerThread(acc_info.type);
     }
 #endif
 
+#ifdef T_WATCH_S3
+    drv.begin();
+    drv.selectLibrary(1);
+    // I2C trigger by sending 'go' command
+    drv.setMode(DRV2605_MODE_INTTRIG);
+#endif
+
     // Init our SPI controller (must be before screen and lora)
     initSPI();
-#ifndef ARCH_ESP32
+#ifdef ARCH_RP2040
+#ifdef HW_SPI1_DEVICE
+    SPI1.setSCK(RF95_SCK);
+    SPI1.setTX(RF95_MOSI);
+    SPI1.setRX(RF95_MISO);
+    pinMode(RF95_NSS, OUTPUT);
+    digitalWrite(RF95_NSS, HIGH);
+    SPI1.begin(false);
+#else                      // HW_SPI1_DEVICE
+    SPI.setSCK(RF95_SCK);
+    SPI.setTX(RF95_MOSI);
+    SPI.setRX(RF95_MISO);
+    SPI.begin(false);
+#endif                     // HW_SPI1_DEVICE
+#elif !defined(ARCH_ESP32) // ARCH_RP2040
     SPI.begin();
 #else
     // ESP32
@@ -457,10 +555,11 @@ void setup()
 
     gps = createGps();
 
-    if (gps)
+    if (gps) {
         gpsStatus->observe(&gps->newStatus);
-    else
+    } else {
         LOG_WARN("No GPS found - running without GPS\n");
+    }
 
     nodeStatus->observe(&nodeDB.newStatus);
 
@@ -477,7 +576,7 @@ void setup()
 
 // Don't call screen setup until after nodedb is setup (because we need
 // the current region name)
-#if defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER)
+#if defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7789_CS)
     screen->setup();
 #else
     if (screen_found.port != ScanI2C::I2CPort::NO_I2C)
@@ -503,7 +602,25 @@ void setup()
     digitalWrite(SX126X_ANT_SW, 1);
 #endif
 
+#ifdef HW_SPI1_DEVICE
+    LockingArduinoHal *RadioLibHAL = new LockingArduinoHal(SPI1, spiSettings);
+#else // HW_SPI1_DEVICE
+    LockingArduinoHal *RadioLibHAL = new LockingArduinoHal(SPI, spiSettings);
+#endif
+
     // radio init MUST BE AFTER service.init, so we have our radio config settings (from nodedb init)
+#if defined(USE_STM32WLx)
+    if (!rIf) {
+        rIf = new STM32WLE5JCInterface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
+        if (!rIf->init()) {
+            LOG_WARN("Failed to find STM32WL radio\n");
+            delete rIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("STM32WL Radio init succeeded, using STM32WL radio\n");
+        }
+    }
+#endif
 
 #if !HAS_RADIO && defined(ARCH_PORTDUINO)
     if (!rIf) {
@@ -520,7 +637,7 @@ void setup()
 
 #if defined(RF95_IRQ)
     if (!rIf) {
-        rIf = new RF95Interface(RF95_NSS, RF95_IRQ, RF95_RESET, RF95_DIO1, SPI);
+        rIf = new RF95Interface(RadioLibHAL, RF95_NSS, RF95_IRQ, RF95_RESET, RF95_DIO1);
         if (!rIf->init()) {
             LOG_WARN("Failed to find RF95 radio\n");
             delete rIf;
@@ -533,7 +650,7 @@ void setup()
 
 #if defined(USE_SX1262)
     if (!rIf) {
-        rIf = new SX1262Interface(SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY, SPI);
+        rIf = new SX1262Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
         if (!rIf->init()) {
             LOG_WARN("Failed to find SX1262 radio\n");
             delete rIf;
@@ -546,7 +663,7 @@ void setup()
 
 #if defined(USE_SX1268)
     if (!rIf) {
-        rIf = new SX1268Interface(SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY, SPI);
+        rIf = new SX1268Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
         if (!rIf->init()) {
             LOG_WARN("Failed to find SX1268 radio\n");
             delete rIf;
@@ -559,7 +676,7 @@ void setup()
 
 #if defined(USE_LLCC68)
     if (!rIf) {
-        rIf = new LLCC68Interface(SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY, SPI);
+        rIf = new LLCC68Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
         if (!rIf->init()) {
             LOG_WARN("Failed to find LLCC68 radio\n");
             delete rIf;
@@ -572,7 +689,7 @@ void setup()
 
 #if defined(USE_SX1280)
     if (!rIf) {
-        rIf = new SX1280Interface(SX128X_CS, SX128X_DIO1, SX128X_RESET, SX128X_BUSY, SPI);
+        rIf = new SX1280Interface(RadioLibHAL, SX128X_CS, SX128X_DIO1, SX128X_RESET, SX128X_BUSY);
         if (!rIf->init()) {
             LOG_WARN("Failed to find SX1280 radio\n");
             delete rIf;
@@ -596,9 +713,7 @@ void setup()
         }
     }
 
-#if HAS_WIFI || HAS_ETHERNET
     mqttInit();
-#endif
 
 #ifndef ARCH_PORTDUINO
     // Initialize Wifi
@@ -625,12 +740,10 @@ void setup()
     else {
         router->addInterface(rIf);
 
-        // Calculate and save the bit rate to myNodeInfo
-        // TODO: This needs to be added what ever method changes the channel from the phone.
-        myNodeInfo.bitrate =
-            (float(meshtastic_Constants_DATA_PAYLOAD_LEN) / (float(rIf->getPacketTime(meshtastic_Constants_DATA_PAYLOAD_LEN)))) *
-            1000;
-        LOG_DEBUG("myNodeInfo.bitrate = %f bytes / sec\n", myNodeInfo.bitrate);
+        // Log bit rate to debug output
+        LOG_DEBUG("LoRA bitrate = %f bytes / sec\n", (float(meshtastic_Constants_DATA_PAYLOAD_LEN) /
+                                                      (float(rIf->getPacketTime(meshtastic_Constants_DATA_PAYLOAD_LEN)))) *
+                                                         1000);
     }
 
     // This must be _after_ service.init because we need our preferences loaded from flash to have proper timeout values
@@ -645,13 +758,13 @@ uint32_t rebootAtMsec;   // If not zero we will reboot at this time (used to reb
 uint32_t shutdownAtMsec; // If not zero we will shutdown at this time (used to shutdown from python or mobile client)
 
 // If a thread does something that might need for it to be rescheduled ASAP it can set this flag
-// This will supress the current delay and instead try to run ASAP.
+// This will suppress the current delay and instead try to run ASAP.
 bool runASAP;
 
 extern meshtastic_DeviceMetadata getDeviceMetadata()
 {
     meshtastic_DeviceMetadata deviceMetadata;
-    strncpy(deviceMetadata.firmware_version, myNodeInfo.firmware_version, 18);
+    strncpy(deviceMetadata.firmware_version, optstr(APP_VERSION), sizeof(deviceMetadata.firmware_version));
     deviceMetadata.device_state_version = DEVICESTATE_CUR_VER;
     deviceMetadata.canShutdown = pmu_found || HAS_CPU_SHUTDOWN;
     deviceMetadata.hasBluetooth = HAS_BLUETOOTH;
@@ -660,6 +773,7 @@ extern meshtastic_DeviceMetadata getDeviceMetadata()
     deviceMetadata.role = config.device.role;
     deviceMetadata.position_flags = config.position.position_flags;
     deviceMetadata.hw_model = HW_VENDOR;
+    deviceMetadata.hasRemoteHardware = moduleConfig.remote_hardware.enabled;
     return deviceMetadata;
 }
 
@@ -707,4 +821,4 @@ void loop()
         mainDelay.delay(delayMsec);
     }
     // if (didWake) LOG_DEBUG("wake!\n");
-}
+}

src/main.h

@@ -8,6 +8,7 @@
 #include "memGet.h"
 #include "mesh/generated/meshtastic/config.pb.h"
 #include "mesh/generated/meshtastic/telemetry.pb.h"
+#include <SPI.h>
 #include <map>
 #if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
 #include <SparkFun_ATECCX08a_Arduino_Library.h>
@@ -26,6 +27,7 @@ extern ScanI2C::DeviceAddress cardkb_found;
 extern uint8_t kb_model;
 extern ScanI2C::DeviceAddress rtc_found;
 extern ScanI2C::DeviceAddress accelerometer_found;
+extern ScanI2C::FoundDevice rgb_found;
 
 extern bool eink_found;
 extern bool pmu_found;
@@ -36,7 +38,11 @@ extern bool isUSBPowered;
 extern ATECCX08A atecc;
 #endif
 
-extern uint8_t nodeTelemetrySensorsMap[_meshtastic_TelemetrySensorType_MAX + 1];
+#ifdef T_WATCH_S3
+#include <Adafruit_DRV2605.h>
+extern Adafruit_DRV2605 drv;
+#endif
+extern bool isVibrating;
 
 extern int TCPPort; // set by Portduino
 
@@ -59,9 +65,12 @@ extern uint32_t shutdownAtMsec;
 extern uint32_t serialSinceMsec;
 
 // If a thread does something that might need for it to be rescheduled ASAP it can set this flag
-// This will supress the current delay and instead try to run ASAP.
+// This will suppress the current delay and instead try to run ASAP.
 extern bool runASAP;
 
-void nrf52Setup(), esp32Setup(), nrf52Loop(), esp32Loop(), clearBonds();
+void nrf52Setup(), esp32Setup(), nrf52Loop(), esp32Loop(), rp2040Setup(), clearBonds();
 
 meshtastic_DeviceMetadata getDeviceMetadata();
+
+// FIXME, we default to 4MHz SPI, SPI mode 0, check if the datasheet says it can really do that
+extern SPISettings spiSettings;

src/mesh/Channels.cpp

@@ -108,8 +108,9 @@ CryptoKey Channels::getKey(ChannelIndex chIndex)
             if (ch.role == meshtastic_Channel_Role_SECONDARY) {
                 LOG_DEBUG("Unset PSK for secondary channel %s. using primary key\n", ch.settings.name);
                 k = getKey(primaryIndex);
-            } else
+            } else {
                 LOG_WARN("User disabled encryption\n");
+            }
         } else if (k.length == 1) {
             // Convert the short single byte variants of psk into variant that can be used more generally
 

src/mesh/Channels.h

@@ -20,7 +20,7 @@ class Channels
     /// The index of the primary channel
     ChannelIndex primaryIndex = 0;
 
-    /** The channel index that was requested for sending/receving.  Note: if this channel is a secondary
+    /** The channel index that was requested for sending/receiving.  Note: if this channel is a secondary
     channel and does not have a PSK, we will use the PSK from the primary channel.  If this channel is disabled
     no sending or receiving will be allowed */
     ChannelIndex activeChannelIndex = 0;

src/mesh/FloodingRouter.cpp

@@ -21,6 +21,12 @@ bool FloodingRouter::shouldFilterReceived(const meshtastic_MeshPacket *p)
 {
     if (wasSeenRecently(p)) { // Note: this will also add a recent packet record
         printPacket("Ignoring incoming msg, because we've already seen it", p);
+        if (config.device.role != meshtastic_Config_DeviceConfig_Role_ROUTER &&
+            config.device.role != meshtastic_Config_DeviceConfig_Role_ROUTER_CLIENT &&
+            config.device.role != meshtastic_Config_DeviceConfig_Role_REPEATER) {
+            // cancel rebroadcast of this message *if* there was already one, unless we're a router/repeater!
+            Router::cancelSending(p->from, p->id);
+        }
         return true;
     }
 
@@ -62,4 +68,4 @@ void FloodingRouter::sniffReceived(const meshtastic_MeshPacket *p, const meshtas
     }
     // handle the packet as normal
     Router::sniffReceived(p, c);
-}
+}

src/mesh/FloodingRouter.h

@@ -48,7 +48,7 @@ class FloodingRouter : public Router, protected PacketHistory
     /**
      * Should this incoming filter be dropped?
      *
-     * Called immedately on receiption, before any further processing.
+     * Called immediately on reception, before any further processing.
      * @return true to abandon the packet
      */
     virtual bool shouldFilterReceived(const meshtastic_MeshPacket *p) override;

src/mesh/InterfacesTemplates.cpp

@@ -10,6 +10,9 @@ template class SX126xInterface<SX1262>;
 template class SX126xInterface<SX1268>;
 template class SX126xInterface<LLCC68>;
 template class SX128xInterface<SX1280>;
+#ifdef ARCH_STM32WL
+template class SX126xInterface<STM32WLx>;
+#endif
 
 #if HAS_ETHERNET
 #include "api/ethServerAPI.h"

src/mesh/LLCC68Interface.cpp

@@ -2,8 +2,8 @@
 #include "configuration.h"
 #include "error.h"
 
-LLCC68Interface::LLCC68Interface(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst, RADIOLIB_PIN_TYPE busy,
-                                 SPIClass &spi)
-    : SX126xInterface(cs, irq, rst, busy, spi)
+LLCC68Interface::LLCC68Interface(LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst,
+                                 RADIOLIB_PIN_TYPE busy)
+    : SX126xInterface(hal, cs, irq, rst, busy)
 {
 }

src/mesh/LLCC68Interface.h

@@ -6,12 +6,13 @@
  * Our adapter for LLCC68 radios
  * https://www.semtech.com/products/wireless-rf/lora-core/llcc68
  * ⚠️⚠️⚠️
- * Be aware that LLCC68 does not support Spreading Factor 12 (SF12) and will not work on the default "Long Slow" channel.
+ * Be aware that LLCC68 does not support Spreading Factor 12 (SF12) and will not work on the "LongSlow" and "VLongSlow" channels.
  * You must change the channel if you get `Critical Error #3` with this module.
  * ⚠️⚠️⚠️
  */
 class LLCC68Interface : public SX126xInterface<LLCC68>
 {
   public:
-    LLCC68Interface(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst, RADIOLIB_PIN_TYPE busy, SPIClass &spi);
+    LLCC68Interface(LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst,
+                    RADIOLIB_PIN_TYPE busy);
 };

src/mesh/MeshModule.cpp

@@ -18,7 +18,7 @@ meshtastic_MeshPacket *MeshModule::currentReply;
 
 MeshModule::MeshModule(const char *_name) : name(_name)
 {
-    // Can't trust static initalizer order, so we check each time
+    // Can't trust static initializer order, so we check each time
     if (!modules)
         modules = new std::vector<MeshModule *>();
 
@@ -39,7 +39,7 @@ meshtastic_MeshPacket *MeshModule::allocAckNak(meshtastic_Routing_Error err, Nod
     c.error_reason = err;
     c.which_variant = meshtastic_Routing_error_reason_tag;
 
-    // Now that we have moded sendAckNak up one level into the class heirarchy we can no longer assume we are a RoutingPlugin
+    // Now that we have moded sendAckNak up one level into the class hierarchy we can no longer assume we are a RoutingPlugin
     // So we manually call pb_encode_to_bytes and specify routing port number
     // auto p = allocDataProtobuf(c);
     meshtastic_MeshPacket *p = router->allocForSending();
@@ -169,7 +169,7 @@ void MeshModule::callPlugins(const meshtastic_MeshPacket &mp, RxSource src)
             // Note: if the message started with the local node or a module asked to ignore the request, we don't want to send a
             // no response reply
 
-            // No one wanted to reply to this requst, tell the requster that happened
+            // No one wanted to reply to this request, tell the requster that happened
             LOG_DEBUG("No one responded, send a nak\n");
 
             // SECURITY NOTE! I considered sending back a different error code if we didn't find the psk (i.e. !isDecoded)
@@ -179,9 +179,10 @@ void MeshModule::callPlugins(const meshtastic_MeshPacket &mp, RxSource src)
         }
     }
 
-    if (!moduleFound)
+    if (!moduleFound) {
         LOG_DEBUG("No modules interested in portnum=%d, src=%s\n", mp.decoded.portnum,
                   (src == RX_SRC_LOCAL) ? "LOCAL" : "REMOTE");
+    }
 }
 
 meshtastic_MeshPacket *MeshModule::allocReply()

src/mesh/MeshModule.h

@@ -47,7 +47,7 @@ typedef struct _UIFrameEvent {
  * A key concept for this is that your module should use a particular "portnum" for each message type you want to receive
  * and handle.
  *
- * Interally we use modules to implement the core meshtastic text messaging and gps position sharing features.  You
+ * Internally we use modules to implement the core meshtastic text messaging and gps position sharing features.  You
  * can use these classes as examples for how to write your own custom module.  See here: (FIXME)
  */
 class MeshModule

src/mesh/MeshService.cpp

@@ -9,6 +9,7 @@
 #include "NodeDB.h"
 #include "PowerFSM.h"
 #include "RTC.h"
+#include "TypeConversions.h"
 #include "main.h"
 #include "mesh-pb-constants.h"
 #include "modules/NodeInfoModule.h"
@@ -33,7 +34,7 @@ arbitrating to select a node number and keeping the current nodedb.
 
 /* Broadcast when a newly powered mesh node wants to find a node num it can use
 
-The algoritm is as follows:
+The algorithm is as follows:
 * when a node starts up, it broadcasts their user and the normal flow is for all other nodes to reply with their User as well (so
 the new node can build its node db)
 * If a node ever receives a User (not just the first broadcast) message where the sender node number equals our node number, that
@@ -51,13 +52,18 @@ FIXME in the initial proof of concept we just skip the entire want/deny flow and
 
 MeshService service;
 
+static MemoryDynamic<meshtastic_MqttClientProxyMessage> staticMqttClientProxyMessagePool;
+
 static MemoryDynamic<meshtastic_QueueStatus> staticQueueStatusPool;
 
+Allocator<meshtastic_MqttClientProxyMessage> &mqttClientProxyMessagePool = staticMqttClientProxyMessagePool;
+
 Allocator<meshtastic_QueueStatus> &queueStatusPool = staticQueueStatusPool;
 
 #include "Router.h"
 
-MeshService::MeshService() : toPhoneQueue(MAX_RX_TOPHONE), toPhoneQueueStatusQueue(MAX_RX_TOPHONE)
+MeshService::MeshService()
+    : toPhoneQueue(MAX_RX_TOPHONE), toPhoneQueueStatusQueue(MAX_RX_TOPHONE), toPhoneMqttProxyQueue(MAX_RX_TOPHONE)
 {
     lastQueueStatus = {0, 0, 16, 0};
 }
@@ -76,7 +82,13 @@ int MeshService::handleFromRadio(const meshtastic_MeshPacket *mp)
     powerFSM.trigger(EVENT_PACKET_FOR_PHONE); // Possibly keep the node from sleeping
 
     nodeDB.updateFrom(*mp); // update our DB state based off sniffing every RX packet from the radio
-    if (mp->which_payload_variant == meshtastic_MeshPacket_decoded_tag && !nodeDB.getNode(mp->from)->has_user && nodeInfoModule) {
+    if (mp->which_payload_variant == meshtastic_MeshPacket_decoded_tag &&
+        mp->decoded.portnum == meshtastic_PortNum_TELEMETRY_APP && mp->decoded.request_id > 0) {
+        LOG_DEBUG(
+            "Received telemetry response. Skip sending our NodeInfo because this potentially a Repeater which will ignore our "
+            "request for its NodeInfo.\n");
+    } else if (mp->which_payload_variant == meshtastic_MeshPacket_decoded_tag && !nodeDB.getMeshNode(mp->from)->has_user &&
+               nodeInfoModule) {
         LOG_INFO("Heard a node on channel %d we don't know, sending NodeInfo and asking for a response.\n", mp->channel);
         nodeInfoModule->sendOurNodeInfo(mp->from, true, mp->channel);
     }
@@ -236,10 +248,11 @@ void MeshService::sendToMesh(meshtastic_MeshPacket *p, RxSource src, bool ccToPh
 
 void MeshService::sendNetworkPing(NodeNum dest, bool wantReplies)
 {
-    meshtastic_NodeInfo *node = nodeDB.getNode(nodeDB.getNodeNum());
+    meshtastic_NodeInfoLite *node = nodeDB.getMeshNode(nodeDB.getNodeNum());
+
     assert(node);
 
-    if (node->has_position && (node->position.latitude_i != 0 || node->position.longitude_i != 0)) {
+    if (hasValidPosition(node)) {
         if (positionModule) {
             LOG_INFO("Sending position ping to 0x%x, wantReplies=%d, channel=%d\n", dest, wantReplies, node->channel);
             positionModule->sendOurPosition(dest, wantReplies, node->channel);
@@ -266,9 +279,23 @@ void MeshService::sendToPhone(meshtastic_MeshPacket *p)
     fromNum++;
 }
 
-meshtastic_NodeInfo *MeshService::refreshMyNodeInfo()
+void MeshService::sendMqttMessageToClientProxy(meshtastic_MqttClientProxyMessage *m)
 {
-    meshtastic_NodeInfo *node = nodeDB.getNode(nodeDB.getNodeNum());
+    LOG_DEBUG("Sending mqtt message on topic '%s' to client for proxying to server\n", m->topic);
+    if (toPhoneMqttProxyQueue.numFree() == 0) {
+        LOG_WARN("MqttClientProxyMessagePool queue is full, discarding oldest\n");
+        meshtastic_MqttClientProxyMessage *d = toPhoneMqttProxyQueue.dequeuePtr(0);
+        if (d)
+            releaseMqttClientProxyMessageToPool(d);
+    }
+
+    assert(toPhoneMqttProxyQueue.enqueue(m, 0));
+    fromNum++;
+}
+
+meshtastic_NodeInfoLite *MeshService::refreshLocalMeshNode()
+{
+    meshtastic_NodeInfoLite *node = nodeDB.getMeshNode(nodeDB.getNodeNum());
     assert(node);
 
     // We might not have a position yet for our local node, in that case, at least try to send the time
@@ -277,7 +304,7 @@ meshtastic_NodeInfo *MeshService::refreshMyNodeInfo()
         node->has_position = true;
     }
 
-    meshtastic_Position &position = node->position;
+    meshtastic_PositionLite &position = node->position;
 
     // Update our local node info with our time (even if we don't decide to update anyone else)
     node->last_heard =
@@ -293,7 +320,7 @@ meshtastic_NodeInfo *MeshService::refreshMyNodeInfo()
 int MeshService::onGPSChanged(const meshtastic::GPSStatus *newStatus)
 {
     // Update our local node info with our position (even if we don't decide to update anyone else)
-    meshtastic_NodeInfo *node = refreshMyNodeInfo();
+    meshtastic_NodeInfoLite *node = refreshLocalMeshNode();
     meshtastic_Position pos = meshtastic_Position_init_default;
 
     if (newStatus->getHasLock()) {
@@ -307,12 +334,12 @@ int MeshService::onGPSChanged(const meshtastic::GPSStatus *newStatus)
 #endif
         if (config.position.fixed_position) {
             LOG_WARN("Using fixed position\n");
-            pos = node->position;
+            pos = ConvertToPosition(node->position);
         }
     }
 
     // Finally add a fresh timestamp and battery level reading
-    // I KNOW this is redundant with refreshMyNodeInfo() above, but these are
+    // I KNOW this is redundant with refreshLocalMeshNode() above, but these are
     //   inexpensive nonblocking calls and can be refactored in due course
     pos.time = getValidTime(RTCQualityGPS);
 
@@ -329,4 +356,4 @@ int MeshService::onGPSChanged(const meshtastic::GPSStatus *newStatus)
 bool MeshService::isToPhoneQueueEmpty()
 {
     return toPhoneQueue.isEmpty();
-}
+}

src/mesh/MeshService.h

@@ -15,6 +15,7 @@
 #endif
 
 extern Allocator<meshtastic_QueueStatus> &queueStatusPool;
+extern Allocator<meshtastic_MqttClientProxyMessage> &mqttClientProxyMessagePool;
 
 /**
  * Top level app for this service.  keeps the mesh, the radio config and the queue of received packets.
@@ -34,6 +35,9 @@ class MeshService
     // keep list of QueueStatus packets to be send to the phone
     PointerQueue<meshtastic_QueueStatus> toPhoneQueueStatusQueue;
 
+    // keep list of MqttClientProxyMessages to be send to the client for delivery
+    PointerQueue<meshtastic_MqttClientProxyMessage> toPhoneMqttProxyQueue;
+
     // This holds the last QueueStatus send
     meshtastic_QueueStatus lastQueueStatus;
 
@@ -67,9 +71,15 @@ class MeshService
     /// Return the next QueueStatus packet destined to the phone.
     meshtastic_QueueStatus *getQueueStatusForPhone() { return toPhoneQueueStatusQueue.dequeuePtr(0); }
 
+    /// Return the next MqttClientProxyMessage packet destined to the phone.
+    meshtastic_MqttClientProxyMessage *getMqttClientProxyMessageForPhone() { return toPhoneMqttProxyQueue.dequeuePtr(0); }
+
     // Release QueueStatus packet to pool
     void releaseQueueStatusToPool(meshtastic_QueueStatus *p) { queueStatusPool.release(p); }
 
+    // Release MqttClientProxyMessage packet to pool
+    void releaseMqttClientProxyMessageToPool(meshtastic_MqttClientProxyMessage *p) { mqttClientProxyMessagePool.release(p); }
+
     /**
      *  Given a ToRadio buffer parse it and properly handle it (setup radio, owner or send packet into the mesh)
      * Called by PhoneAPI.handleToRadio.  Note: p is a scratch buffer, this function is allowed to write to it but it can not keep
@@ -98,16 +108,19 @@ class MeshService
     bool cancelSending(PacketId id);
 
     /// Pull the latest power and time info into my nodeinfo
-    meshtastic_NodeInfo *refreshMyNodeInfo();
+    meshtastic_NodeInfoLite *refreshLocalMeshNode();
 
     /// Send a packet to the phone
     void sendToPhone(meshtastic_MeshPacket *p);
 
+    /// Send an MQTT message to the phone for client proxying
+    void sendMqttMessageToClientProxy(meshtastic_MqttClientProxyMessage *m);
+
     bool isToPhoneQueueEmpty();
 
   private:
     /// Called when our gps position has changed - updates nodedb and sends Location message out into the mesh
-    /// returns 0 to allow futher processing
+    /// returns 0 to allow further processing
     int onGPSChanged(const meshtastic::GPSStatus *arg);
 
     /// Handle a packet that just arrived from the radio.  This method does _ReliableRouternot_ free the provided packet.  If it
@@ -118,4 +131,4 @@ class MeshService
     ErrorCode sendQueueStatusToPhone(const meshtastic_QueueStatus &qs, ErrorCode res, uint32_t mesh_packet_id);
 };
 
-extern MeshService service;
+extern MeshService service;

src/mesh/MeshTypes.h

@@ -13,7 +13,7 @@ typedef uint32_t PacketId; // A packet sequence number
 #define ERRNO_OK 0
 #define ERRNO_NO_INTERFACES 33
 #define ERRNO_UNKNOWN 32  // pick something that doesn't conflict with RH_ROUTER_ERROR_UNABLE_TO_DELIVER
-#define ERRNO_DISABLED 34 // the itnerface is disabled
+#define ERRNO_DISABLED 34 // the interface is disabled
 
 /*
  * Source of a received message

src/mesh/NodeDB.cpp

@@ -11,6 +11,7 @@
 #include "PowerFSM.h"
 #include "RTC.h"
 #include "Router.h"
+#include "TypeConversions.h"
 #include "error.h"
 #include "main.h"
 #include "mesh-pb-constants.h"
@@ -55,10 +56,18 @@ extern void getMacAddr(uint8_t *dmac);
  * we use !macaddr (no colons).
  */
 meshtastic_User &owner = devicestate.owner;
+meshtastic_Position localPosition = meshtastic_Position_init_default;
+meshtastic_CriticalErrorCode error_code =
+    meshtastic_CriticalErrorCode_NONE; // For the error code, only show values from this boot (discard value from flash)
+uint32_t error_address = 0;
 
 static uint8_t ourMacAddr[6];
 
-NodeDB::NodeDB() : nodes(devicestate.node_db), numNodes(&devicestate.node_db_count) {}
+NodeDB::NodeDB()
+    : nodes(devicestate.node_db), numNodes(&devicestate.node_db_count), meshNodes(devicestate.node_db_lite),
+      numMeshNodes(&devicestate.node_db_lite_count)
+{
+}
 
 /**
  * Most (but not always) of the time we want to treat packets 'from' the local phone (where from == 0), as if they originated on
@@ -129,7 +138,7 @@ bool NodeDB::factoryReset()
     // third, write everything to disk
     saveToDisk();
 #ifdef ARCH_ESP32
-    // This will erase what's in NVS including ssl keys, persistant variables and ble pairing
+    // This will erase what's in NVS including ssl keys, persistent variables and ble pairing
     nvs_flash_erase();
 #endif
 #ifdef ARCH_NRF52
@@ -156,7 +165,8 @@ void NodeDB::installDefaultConfig()
     config.has_network = true;
     config.has_bluetooth = true;
     config.device.rebroadcast_mode = meshtastic_Config_DeviceConfig_RebroadcastMode_ALL;
-    config.lora.sx126x_rx_boosted_gain = false;
+
+    config.lora.sx126x_rx_boosted_gain = true;
     config.lora.tx_enabled =
         true; // FIXME: maybe false in the future, and setting region to enable it. (unset region forces it off)
     config.lora.override_duty_cycle = false;
@@ -175,7 +185,7 @@ void NodeDB::installDefaultConfig()
     // FIXME: Default to bluetooth capability of platform as default
     config.bluetooth.enabled = true;
     config.bluetooth.fixed_pin = defaultBLEPin;
-#if defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER)
+#if defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7789_CS)
     bool hasScreen = true;
 #else
     bool hasScreen = screen_found.port != ScanI2C::I2CPort::NO_I2C;
@@ -186,6 +196,11 @@ void NodeDB::installDefaultConfig()
     config.position.position_flags =
         (meshtastic_Config_PositionConfig_PositionFlags_ALTITUDE | meshtastic_Config_PositionConfig_PositionFlags_ALTITUDE_MSL);
 
+#ifdef T_WATCH_S3
+    config.display.screen_on_secs = 30;
+    config.display.wake_on_tap_or_motion = true;
+#endif
+
     initConfigIntervals();
 }
 
@@ -216,6 +231,19 @@ void NodeDB::installDefaultModuleConfig()
     moduleConfig.has_store_forward = true;
     moduleConfig.has_telemetry = true;
     moduleConfig.has_external_notification = true;
+#if defined(RAK4630) || defined(RAK11310)
+    // Default to RAK led pin 2 (blue)
+    moduleConfig.external_notification.enabled = true;
+    moduleConfig.external_notification.output = PIN_LED2;
+    moduleConfig.external_notification.active = true;
+    moduleConfig.external_notification.alert_message = true;
+    moduleConfig.external_notification.output_ms = 1000;
+    moduleConfig.external_notification.nag_timeout = 60;
+#endif
+#ifdef T_WATCH_S3
+    // Don't worry about the other settings, we'll use the DRV2056 behavior for notifications
+    moduleConfig.external_notification.enabled = true;
+#endif
     moduleConfig.has_canned_message = true;
 
     strncpy(moduleConfig.mqtt.address, default_mqtt_address, sizeof(moduleConfig.mqtt.address));
@@ -258,6 +286,9 @@ void NodeDB::resetNodes()
 {
     devicestate.node_db_count = 0;
     memset(devicestate.node_db, 0, sizeof(devicestate.node_db));
+
+    devicestate.node_db_lite_count = 0;
+    memset(devicestate.node_db_lite, 0, sizeof(devicestate.node_db_lite));
     saveDeviceStateToDisk();
 }
 
@@ -272,17 +303,12 @@ void NodeDB::installDefaultDeviceState()
     devicestate.has_my_node = true;
     devicestate.has_owner = true;
     devicestate.node_db_count = 0;
+    devicestate.node_db_lite_count = 0;
     devicestate.version = DEVICESTATE_CUR_VER;
     devicestate.receive_queue_count = 0; // Not yet implemented FIXME
 
-    // default to no GPS, until one has been found by probing
-    myNodeInfo.has_gps = false;
-    myNodeInfo.message_timeout_msec = FLOOD_EXPIRE_TIME;
     generatePacketId(); // FIXME - ugly way to init current_packet_id;
 
-    // Init our blank owner info to reasonable defaults
-    getMacAddr(ourMacAddr);
-
     // Set default owner name
     pickNewNodeNum(); // based on macaddr now
     snprintf(owner.long_name, sizeof(owner.long_name), "Meshtastic %02x%02x", ourMacAddr[4], ourMacAddr[5]);
@@ -303,28 +329,34 @@ void NodeDB::init()
 
     int saveWhat = 0;
 
-    myNodeInfo.max_channels = MAX_NUM_CHANNELS; // tell others the max # of channels we can understand
-
-    myNodeInfo.error_code =
-        meshtastic_CriticalErrorCode_NONE; // For the error code, only show values from this boot (discard value from flash)
-    myNodeInfo.error_address = 0;
-
     // likewise - we always want the app requirements to come from the running appload
-    myNodeInfo.min_app_version = 20300; // format is Mmmss (where M is 1+the numeric major number. i.e. 20120 means 1.1.20
-
+    myNodeInfo.min_app_version = 20300;         // format is Mmmss (where M is 1+the numeric major number. i.e. 20120 means 1.1.20
+    myNodeInfo.max_channels = MAX_NUM_CHANNELS; // tell others the max # of channels we can understand
     // Note! We do this after loading saved settings, so that if somehow an invalid nodenum was stored in preferences we won't
     // keep using that nodenum forever. Crummy guess at our nodenum (but we will check against the nodedb to avoid conflicts)
+    strncpy(myNodeInfo.firmware_version, optstr(APP_VERSION), sizeof(myNodeInfo.firmware_version));
     pickNewNodeNum();
 
     // Set our board type so we can share it with others
     owner.hw_model = HW_VENDOR;
 
     // Include our owner in the node db under our nodenum
-    meshtastic_NodeInfo *info = getOrCreateNode(getNodeNum());
+    meshtastic_NodeInfoLite *info = getOrCreateMeshNode(getNodeNum());
     info->user = owner;
     info->has_user = true;
 
-    strncpy(myNodeInfo.firmware_version, optstr(APP_VERSION), sizeof(myNodeInfo.firmware_version));
+    if (*numNodes > 0) {
+        LOG_DEBUG("Legacy NodeDB detected... Migrating to NodeDBLite\n");
+        uint32_t readIndex = 0;
+        const meshtastic_NodeInfo *oldNodeInfo = nodeDB.readNextNodeInfo(readIndex);
+        while (oldNodeInfo != NULL) {
+            migrateToNodeInfoLite(oldNodeInfo);
+            oldNodeInfo = nodeDB.readNextNodeInfo(readIndex);
+        }
+        LOG_DEBUG("Migration complete! Clearing out legacy NodeDB...\n");
+        devicestate.node_db_count = 0;
+        memset(devicestate.node_db, 0, sizeof(devicestate.node_db));
+    }
 
 #ifdef ARCH_ESP32
     Preferences preferences;
@@ -332,11 +364,6 @@ void NodeDB::init()
     myNodeInfo.reboot_count = preferences.getUInt("rebootCounter", 0);
     preferences.end();
     LOG_DEBUG("Number of Device Reboots: %d\n", myNodeInfo.reboot_count);
-
-    /* The ESP32 has a wifi radio. This will need to be modified at some point so
-     *    the test isn't so simplistic.
-     */
-    myNodeInfo.has_wifi = true;
 #endif
 
     resetRadioConfig(); // If bogus settings got saved, then fix them
@@ -349,6 +376,11 @@ void NodeDB::init()
     if (channelFileCRC != crc32Buffer(&channelFile, sizeof(channelFile)))
         saveWhat |= SEGMENT_CHANNELS;
 
+    if (!devicestate.node_remote_hardware_pins) {
+        meshtastic_NodeRemoteHardwarePin empty[12] = {meshtastic_RemoteHardwarePin_init_default};
+        memcpy(devicestate.node_remote_hardware_pins, empty, sizeof(empty));
+    }
+
     saveToDisk(saveWhat);
 }
 
@@ -362,17 +394,19 @@ void NodeDB::pickNewNodeNum()
 {
     NodeNum r = myNodeInfo.my_node_num;
 
-    // If we don't have a nodenum at app - pick an initial nodenum based on the macaddr
-    if (r == 0)
-        r = (ourMacAddr[2] << 24) | (ourMacAddr[3] << 16) | (ourMacAddr[4] << 8) | ourMacAddr[5];
+    getMacAddr(ourMacAddr); // Make sure ourMacAddr is set
+
+    // Pick an initial nodenum based on the macaddr
+    r = (ourMacAddr[2] << 24) | (ourMacAddr[3] << 16) | (ourMacAddr[4] << 8) | ourMacAddr[5];
 
     if (r == NODENUM_BROADCAST || r < NUM_RESERVED)
         r = NUM_RESERVED; // don't pick a reserved node number
 
-    meshtastic_NodeInfo *found;
-    while ((found = getNode(r)) && memcmp(found->user.macaddr, owner.macaddr, sizeof(owner.macaddr))) {
+    meshtastic_NodeInfoLite *found;
+    while ((found = getMeshNode(r)) && memcmp(found->user.macaddr, owner.macaddr, sizeof(owner.macaddr))) {
+        // FIXME: input for random() is int, so NODENUM_BROADCAST becomes -1
         NodeNum n = random(NUM_RESERVED, NODENUM_BROADCAST); // try a new random choice
-        LOG_DEBUG("NOTE! Our desired nodenum 0x%x is in use, so trying for 0x%x\n", r, n);
+        LOG_WARN("NOTE! Our desired nodenum 0x%x is in use, so trying for 0x%x\n", r, n);
         r = n;
     }
 
@@ -468,8 +502,9 @@ void NodeDB::loadFromDisk()
         }
     }
 
-    if (loadProto(oemConfigFile, meshtastic_OEMStore_size, sizeof(meshtastic_OEMStore), &meshtastic_OEMStore_msg, &oemStore))
+    if (loadProto(oemConfigFile, meshtastic_OEMStore_size, sizeof(meshtastic_OEMStore), &meshtastic_OEMStore_msg, &oemStore)) {
         LOG_INFO("Loaded OEMStore\n");
+    }
 }
 
 /** Save a protobuf from a file, return true for success */
@@ -494,10 +529,12 @@ bool NodeDB::saveProto(const char *filename, size_t protoSize, const pb_msgdesc_
         f.close();
 
         // brief window of risk here ;-)
-        if (FSCom.exists(filename) && !FSCom.remove(filename))
+        if (FSCom.exists(filename) && !FSCom.remove(filename)) {
             LOG_WARN("Can't remove old pref file\n");
-        if (!renameFile(filenameTmp.c_str(), filename))
+        }
+        if (!renameFile(filenameTmp.c_str(), filename)) {
             LOG_ERROR("Error: can't rename new pref file\n");
+        }
     } else {
         LOG_ERROR("Can't write prefs\n");
 #ifdef ARCH_NRF52
@@ -576,16 +613,24 @@ void NodeDB::saveToDisk(int saveWhat)
     }
 }
 
-const meshtastic_NodeInfo *NodeDB::readNextInfo()
+const meshtastic_NodeInfo *NodeDB::readNextNodeInfo(uint32_t &readIndex)
 {
-    if (readPointer < *numNodes)
-        return &nodes[readPointer++];
+    if (readIndex < *numNodes)
+        return &nodes[readIndex++];
+    else
+        return NULL;
+}
+
+const meshtastic_NodeInfoLite *NodeDB::readNextMeshNode(uint32_t &readIndex)
+{
+    if (readIndex < *numMeshNodes)
+        return &meshNodes[readIndex++];
     else
         return NULL;
 }
 
 /// Given a node, return how many seconds in the past (vs now) that we last heard from it
-uint32_t sinceLastSeen(const meshtastic_NodeInfo *n)
+uint32_t sinceLastSeen(const meshtastic_NodeInfoLite *n)
 {
     uint32_t now = getTime();
 
@@ -609,13 +654,13 @@ uint32_t sinceReceived(const meshtastic_MeshPacket *p)
 
 #define NUM_ONLINE_SECS (60 * 60 * 2) // 2 hrs to consider someone offline
 
-size_t NodeDB::getNumOnlineNodes()
+size_t NodeDB::getNumOnlineMeshNodes()
 {
     size_t numseen = 0;
 
     // FIXME this implementation is kinda expensive
-    for (int i = 0; i < *numNodes; i++)
-        if (sinceLastSeen(&nodes[i]) < NUM_ONLINE_SECS)
+    for (int i = 0; i < *numMeshNodes; i++)
+        if (sinceLastSeen(&meshNodes[i]) < NUM_ONLINE_SECS)
             numseen++;
 
     return numseen;
@@ -627,7 +672,7 @@ size_t NodeDB::getNumOnlineNodes()
  */
 void NodeDB::updatePosition(uint32_t nodeId, const meshtastic_Position &p, RxSource src)
 {
-    meshtastic_NodeInfo *info = getOrCreateNode(nodeId);
+    meshtastic_NodeInfoLite *info = getOrCreateMeshNode(nodeId);
     if (!info) {
         return;
     }
@@ -636,7 +681,9 @@ void NodeDB::updatePosition(uint32_t nodeId, const meshtastic_Position &p, RxSou
         // Local packet, fully authoritative
         LOG_INFO("updatePosition LOCAL pos@%x, time=%u, latI=%d, lonI=%d, alt=%d\n", p.timestamp, p.time, p.latitude_i,
                  p.longitude_i, p.altitude);
-        info->position = p;
+
+        info->position = ConvertToPositionLite(p);
+        localPosition = p;
     } else if ((p.time > 0) && !p.latitude_i && !p.longitude_i && !p.timestamp && !p.location_source) {
         // FIXME SPECIAL TIME SETTING PACKET FROM EUD TO RADIO
         // (stop-gap fix for issue #900)
@@ -654,7 +701,7 @@ void NodeDB::updatePosition(uint32_t nodeId, const meshtastic_Position &p, RxSou
         uint32_t tmp_time = info->position.time;
 
         // Next, update atomically
-        info->position = p;
+        info->position = ConvertToPositionLite(p);
 
         // Last, restore any fields that may have been overwritten
         if (!info->position.time)
@@ -670,7 +717,7 @@ void NodeDB::updatePosition(uint32_t nodeId, const meshtastic_Position &p, RxSou
  */
 void NodeDB::updateTelemetry(uint32_t nodeId, const meshtastic_Telemetry &t, RxSource src)
 {
-    meshtastic_NodeInfo *info = getOrCreateNode(nodeId);
+    meshtastic_NodeInfoLite *info = getOrCreateMeshNode(nodeId);
     // Environment metrics should never go to NodeDb but we'll safegaurd anyway
     if (!info || t.which_variant != meshtastic_Telemetry_device_metrics_tag) {
         return;
@@ -692,7 +739,7 @@ void NodeDB::updateTelemetry(uint32_t nodeId, const meshtastic_Telemetry &t, RxS
  */
 bool NodeDB::updateUser(uint32_t nodeId, const meshtastic_User &p)
 {
-    meshtastic_NodeInfo *info = getOrCreateNode(nodeId);
+    meshtastic_NodeInfoLite *info = getOrCreateMeshNode(nodeId);
     if (!info) {
         return false;
     }
@@ -725,7 +772,7 @@ void NodeDB::updateFrom(const meshtastic_MeshPacket &mp)
     if (mp.which_payload_variant == meshtastic_MeshPacket_decoded_tag && mp.from) {
         LOG_DEBUG("Update DB node 0x%x, rx_time=%u, channel=%d\n", mp.from, mp.rx_time, mp.channel);
 
-        meshtastic_NodeInfo *info = getOrCreateNode(getFrom(&mp));
+        meshtastic_NodeInfoLite *info = getOrCreateMeshNode(getFrom(&mp));
         if (!info) {
             return;
         }
@@ -742,9 +789,9 @@ void NodeDB::updateFrom(const meshtastic_MeshPacket &mp)
     }
 }
 
-uint8_t NodeDB::getNodeChannel(NodeNum n)
+uint8_t NodeDB::getMeshNodeChannel(NodeNum n)
 {
-    meshtastic_NodeInfo *info = getNode(n);
+    meshtastic_NodeInfoLite *info = getMeshNode(n);
     if (!info) {
         return 0; // defaults to PRIMARY
     }
@@ -753,7 +800,7 @@ uint8_t NodeDB::getNodeChannel(NodeNum n)
 
 /// Find a node in our DB, return null for missing
 /// NOTE: This function might be called from an ISR
-meshtastic_NodeInfo *NodeDB::getNode(NodeNum n)
+meshtastic_NodeInfo *NodeDB::getNodeInfo(NodeNum n)
 {
     for (int i = 0; i < *numNodes; i++)
         if (nodes[i].num == n)
@@ -762,38 +809,100 @@ meshtastic_NodeInfo *NodeDB::getNode(NodeNum n)
     return NULL;
 }
 
-/// Find a node in our DB, create an empty NodeInfo if missing
-meshtastic_NodeInfo *NodeDB::getOrCreateNode(NodeNum n)
+/// Find a node in our DB, return null for missing
+/// NOTE: This function might be called from an ISR
+meshtastic_NodeInfoLite *NodeDB::getMeshNode(NodeNum n)
 {
-    meshtastic_NodeInfo *info = getNode(n);
+    for (int i = 0; i < *numMeshNodes; i++)
+        if (meshNodes[i].num == n)
+            return &meshNodes[i];
 
-    if (!info) {
-        if ((*numNodes >= MAX_NUM_NODES) || (memGet.getFreeHeap() < meshtastic_NodeInfo_size * 3)) {
-            screen->print("warning: node_db full! erasing oldest entry\n");
+    return NULL;
+}
+
+/// Find a node in our DB, create an empty NodeInfo if missing
+meshtastic_NodeInfoLite *NodeDB::getOrCreateMeshNode(NodeNum n)
+{
+    meshtastic_NodeInfoLite *lite = getMeshNode(n);
+
+    if (!lite) {
+        if ((*numMeshNodes >= MAX_NUM_NODES) || (memGet.getFreeHeap() < meshtastic_NodeInfoLite_size * 3)) {
+            screen->print("warning: node_db_lite full! erasing oldest entry\n");
             // look for oldest node and erase it
             uint32_t oldest = UINT32_MAX;
             int oldestIndex = -1;
-            for (int i = 0; i < *numNodes; i++) {
-                if (nodes[i].last_heard < oldest) {
-                    oldest = nodes[i].last_heard;
+            for (int i = 0; i < *numMeshNodes; i++) {
+                if (meshNodes[i].last_heard < oldest) {
+                    oldest = meshNodes[i].last_heard;
                     oldestIndex = i;
                 }
             }
             // Shove the remaining nodes down the chain
-            for (int i = oldestIndex; i < *numNodes - 1; i++) {
-                nodes[i] = nodes[i + 1];
+            for (int i = oldestIndex; i < *numMeshNodes - 1; i++) {
+                meshNodes[i] = meshNodes[i + 1];
             }
-            (*numNodes)--;
+            (*numMeshNodes)--;
         }
         // add the node at the end
-        info = &nodes[(*numNodes)++];
+        lite = &meshNodes[(*numMeshNodes)++];
 
         // everything is missing except the nodenum
-        memset(info, 0, sizeof(*info));
-        info->num = n;
+        memset(lite, 0, sizeof(*lite));
+        lite->num = n;
     }
 
-    return info;
+    return lite;
+}
+
+void NodeDB::migrateToNodeInfoLite(const meshtastic_NodeInfo *node)
+{
+    meshtastic_NodeInfoLite *lite = getMeshNode(node->num);
+
+    if (!lite) {
+        if ((*numMeshNodes >= MAX_NUM_NODES) || (memGet.getFreeHeap() < meshtastic_NodeInfoLite_size * 3)) {
+            screen->print("warning: node_db_lite full! erasing oldest entry\n");
+            // look for oldest node and erase it
+            uint32_t oldest = UINT32_MAX;
+            int oldestIndex = -1;
+            for (int i = 0; i < *numMeshNodes; i++) {
+                if (meshNodes[i].last_heard < oldest) {
+                    oldest = meshNodes[i].last_heard;
+                    oldestIndex = i;
+                }
+            }
+            // Shove the remaining nodes down the chain
+            for (int i = oldestIndex; i < *numMeshNodes - 1; i++) {
+                meshNodes[i] = meshNodes[i + 1];
+            }
+            (*numMeshNodes)--;
+        }
+        // add the node at the end
+        lite = &meshNodes[(*numMeshNodes)++];
+
+        // everything is missing except the nodenum
+        memset(lite, 0, sizeof(*lite));
+        lite->num = node->num;
+        lite->snr = node->snr;
+        lite->last_heard = node->last_heard;
+        lite->channel = node->channel;
+
+        if (node->has_position) {
+            lite->has_position = true;
+            lite->position.latitude_i = node->position.latitude_i;
+            lite->position.longitude_i = node->position.longitude_i;
+            lite->position.altitude = node->position.altitude;
+            lite->position.location_source = node->position.location_source;
+            lite->position.time = node->position.time;
+        }
+        if (node->has_user) {
+            lite->has_user = true;
+            lite->user = node->user;
+        }
+        if (node->has_device_metrics) {
+            lite->has_device_metrics = true;
+            lite->device_metrics = node->device_metrics;
+        }
+    }
 }
 
 /// Record an error that should be reported via analytics
@@ -802,19 +911,19 @@ void recordCriticalError(meshtastic_CriticalErrorCode code, uint32_t address, co
     // Print error to screen and serial port
     String lcd = String("Critical error ") + code + "!\n";
     screen->print(lcd.c_str());
-    if (filename)
+    if (filename) {
         LOG_ERROR("NOTE! Recording critical error %d at %s:%lu\n", code, filename, address);
-    else
+    } else {
         LOG_ERROR("NOTE! Recording critical error %d, address=0x%lx\n", code, address);
+    }
 
     // Record error to DB
-    myNodeInfo.error_code = code;
-    myNodeInfo.error_address = address;
-    myNodeInfo.error_count++;
+    error_code = code;
+    error_address = address;
 
-    // Currently portuino is mostly used for simulation.  Make sue the user notices something really bad happend
+    // Currently portuino is mostly used for simulation.  Make sure the user notices something really bad happened
 #ifdef ARCH_PORTDUINO
     LOG_ERROR("A critical failure occurred, portduino is exiting...");
     exit(2);
 #endif
-}
+}

src/mesh/NodeDB.h

@@ -7,6 +7,7 @@
 #include "MeshTypes.h"
 #include "NodeStatus.h"
 #include "mesh-pb-constants.h"
+#include "mesh/generated/meshtastic/mesh.pb.h" // For CriticalErrorCode
 
 /*
 DeviceState versions used to be defined in the .proto file but really only this function cares.  So changed to a
@@ -28,9 +29,10 @@ extern meshtastic_LocalConfig config;
 extern meshtastic_LocalModuleConfig moduleConfig;
 extern meshtastic_OEMStore oemStore;
 extern meshtastic_User &owner;
+extern meshtastic_Position localPosition;
 
 /// Given a node, return how many seconds in the past (vs now) that we last heard from it
-uint32_t sinceLastSeen(const meshtastic_NodeInfo *n);
+uint32_t sinceLastSeen(const meshtastic_NodeInfoLite *n);
 
 /// Given a packet, return how many seconds in the past (vs now) it was received
 uint32_t sinceReceived(const meshtastic_MeshPacket *p);
@@ -46,14 +48,15 @@ class NodeDB
     meshtastic_NodeInfo *nodes;
     pb_size_t *numNodes;
 
-    uint32_t readPointer = 0;
+    meshtastic_NodeInfoLite *meshNodes;
+    pb_size_t *numMeshNodes;
 
   public:
     bool updateGUI = false; // we think the gui should definitely be redrawn, screen will clear this once handled
-    meshtastic_NodeInfo *updateGUIforNode = NULL; // if currently showing this node, we think you should update the GUI
+    meshtastic_NodeInfoLite *updateGUIforNode = NULL; // if currently showing this node, we think you should update the GUI
     Observable<const meshtastic::NodeStatus *> newStatus;
 
-    /// don't do mesh based algoritm for node id assignment (initially)
+    /// don't do mesh based algorithm for node id assignment (initially)
     /// instead just store in flash - possibly even in the initial alpha release do this hack
     NodeDB();
 
@@ -91,8 +94,6 @@ class NodeDB
     /// @return our node number
     NodeNum getNodeNum() { return myNodeInfo.my_node_num; }
 
-    size_t getNumNodes() { return *numNodes; }
-
     /// if returns false, that means our node should send a DenyNodeNum response.  If true, we think the number is okay for use
     // bool handleWantNodeNum(NodeNum n);
 
@@ -104,29 +105,14 @@ class NodeDB
     their denial?)
     */
 
-    /// Called from bluetooth when the user wants to start reading the node DB from scratch.
-    void resetReadPointer() { readPointer = 0; }
-
-    /// Allow the bluetooth layer to read our next nodeinfo record, or NULL if done reading
-    const meshtastic_NodeInfo *readNextInfo();
-
     /// pick a provisional nodenum we hope no one is using
     void pickNewNodeNum();
 
     // get channel channel index we heard a nodeNum on, defaults to 0 if not found
-    uint8_t getNodeChannel(NodeNum n);
-
-    /// Find a node in our DB, return null for missing
-    meshtastic_NodeInfo *getNode(NodeNum n);
-
-    meshtastic_NodeInfo *getNodeByIndex(size_t x)
-    {
-        assert(x < *numNodes);
-        return &nodes[x];
-    }
+    uint8_t getMeshNodeChannel(NodeNum n);
 
     /// Return the number of nodes we've heard from recently (within the last 2 hrs?)
-    size_t getNumOnlineNodes();
+    size_t getNumOnlineMeshNodes();
 
     void initConfigIntervals(), initModuleConfigIntervals(), resetNodes();
 
@@ -137,15 +123,38 @@ class NodeDB
 
     void installRoleDefaults(meshtastic_Config_DeviceConfig_Role role);
 
+    const meshtastic_NodeInfoLite *readNextMeshNode(uint32_t &readIndex);
+
+    meshtastic_NodeInfoLite *getMeshNodeByIndex(size_t x)
+    {
+        assert(x < *numMeshNodes);
+        return &meshNodes[x];
+    }
+
+    meshtastic_NodeInfoLite *getMeshNode(NodeNum n);
+    size_t getNumMeshNodes() { return *numMeshNodes; }
+
   private:
-    /// Find a node in our DB, create an empty NodeInfo if missing
-    meshtastic_NodeInfo *getOrCreateNode(NodeNum n);
+    /// Find a node in our DB, create an empty NodeInfoLite if missing
+    meshtastic_NodeInfoLite *getOrCreateMeshNode(NodeNum n);
+    void migrateToNodeInfoLite(const meshtastic_NodeInfo *node);
+    /// Find a node in our DB, return null for missing
+    meshtastic_NodeInfo *getNodeInfo(NodeNum n);
+    /// Allow the bluetooth layer to read our next nodeinfo record, or NULL if done reading
+    const meshtastic_NodeInfo *readNextNodeInfo(uint32_t &readIndex);
+    size_t getNumNodes() { return *numNodes; }
+
+    meshtastic_NodeInfo *getNodeByIndex(size_t x)
+    {
+        assert(x < *numNodes);
+        return &nodes[x];
+    }
 
     /// Notify observers of changes to the DB
     void notifyObservers(bool forceUpdate = false)
     {
         // Notify observers of the current node state
-        const meshtastic::NodeStatus status = meshtastic::NodeStatus(getNumOnlineNodes(), getNumNodes(), forceUpdate);
+        const meshtastic::NodeStatus status = meshtastic::NodeStatus(getNumOnlineMeshNodes(), getNumMeshNodes(), forceUpdate);
         newStatus.notifyObservers(&status);
     }
 
@@ -217,11 +226,29 @@ inline uint32_t getConfiguredOrDefaultMs(uint32_t configuredInterval, uint32_t d
     return defaultInterval * 1000;
 }
 
+/// Sometimes we will have Position objects that only have a time, so check for
+/// valid lat/lon
+static inline bool hasValidPosition(const meshtastic_NodeInfo *n)
+{
+    return n->has_position && (n->position.latitude_i != 0 || n->position.longitude_i != 0);
+}
+static inline bool hasValidPosition(const meshtastic_NodeInfoLite *n)
+{
+    return n->has_position && (n->position.latitude_i != 0 || n->position.longitude_i != 0);
+}
+
 /** The current change # for radio settings.  Starts at 0 on boot and any time the radio settings
  * might have changed is incremented.  Allows others to detect they might now be on a new channel.
  */
 extern uint32_t radioGeneration;
 
+extern meshtastic_CriticalErrorCode error_code;
+
+/*
+ * A numeric error address (nonzero if available)
+ */
+extern uint32_t error_address;
+
 #define Module_Config_size                                                                                                       \
     (ModuleConfig_CannedMessageConfig_size + ModuleConfig_ExternalNotificationConfig_size + ModuleConfig_MQTTConfig_size +       \
      ModuleConfig_RangeTestConfig_size + ModuleConfig_SerialConfig_size + ModuleConfig_StoreForwardConfig_size +                 \

src/mesh/PhoneAPI.cpp

@@ -5,6 +5,7 @@
 #include "NodeDB.h"
 #include "PowerFSM.h"
 #include "RadioInterface.h"
+#include "TypeConversions.h"
 #include "configuration.h"
 #include "main.h"
 #include "xmodem.h"
@@ -17,6 +18,8 @@
 #error ToRadio is too big
 #endif
 
+#include "mqtt/MQTT.h"
+
 PhoneAPI::PhoneAPI()
 {
     lastContactMsec = millis();
@@ -40,9 +43,8 @@ void PhoneAPI::handleStartConfig()
     state = STATE_SEND_MY_INFO;
 
     LOG_INFO("Starting API client config\n");
-    nodeInfoForPhone = NULL;   // Don't keep returning old nodeinfos
-    nodeDB.resetReadPointer(); // FIXME, this read pointer should be moved out of nodeDB and into this class - because
-                               // this will break once we have multiple instances of PhoneAPI running independently
+    nodeInfoForPhone.num = 0; // Don't keep returning old nodeinfos
+    resetReadIndex();
 }
 
 void PhoneAPI::close()
@@ -54,6 +56,7 @@ void PhoneAPI::close()
         unobserve(&xModem.packetReady);
         releasePhonePacket(); // Don't leak phone packets on shutdown
         releaseQueueStatusPhonePacket();
+        releaseMqttClientProxyPhonePacket();
 
         onConnectionChanged(false);
     }
@@ -98,6 +101,12 @@ bool PhoneAPI::handleToRadio(const uint8_t *buf, size_t bufLength)
             LOG_INFO("Got xmodem packet\n");
             xModem.handlePacket(toRadioScratch.xmodemPacket);
             break;
+        case meshtastic_ToRadio_mqttClientProxyMessage_tag:
+            LOG_INFO("Got MqttClientProxy message\n");
+            if (mqtt && moduleConfig.mqtt.proxy_to_client_enabled) {
+                mqtt->onClientProxyReceive(toRadioScratch.mqttClientProxyMessage);
+            }
+            break;
         default:
             // Ignore nop messages
             // LOG_DEBUG("Error: unexpected ToRadio variant\n");
@@ -144,25 +153,23 @@ size_t PhoneAPI::getFromRadio(uint8_t *buf)
         LOG_INFO("getFromRadio=STATE_SEND_MY_INFO\n");
         // If the user has specified they don't want our node to share its location, make sure to tell the phone
         // app not to send locations on our behalf.
-        myNodeInfo.has_gps = gps && gps->isConnected(); // Update with latest GPS connect info
         fromRadioScratch.which_payload_variant = meshtastic_FromRadio_my_info_tag;
         fromRadioScratch.my_info = myNodeInfo;
         state = STATE_SEND_NODEINFO;
 
-        service.refreshMyNodeInfo(); // Update my NodeInfo because the client will be asking for it soon.
+        service.refreshLocalMeshNode(); // Update my NodeInfo because the client will be asking for it soon.
         break;
 
     case STATE_SEND_NODEINFO: {
         LOG_INFO("getFromRadio=STATE_SEND_NODEINFO\n");
-        const meshtastic_NodeInfo *info = nodeInfoForPhone;
-        nodeInfoForPhone = NULL; // We just consumed a nodeinfo, will need a new one next time
 
-        if (info) {
-            LOG_INFO("Sending nodeinfo: num=0x%x, lastseen=%u, id=%s, name=%s\n", info->num, info->last_heard, info->user.id,
-                     info->user.long_name);
+        if (nodeInfoForPhone.num != 0) {
+            LOG_INFO("nodeinfo: num=0x%x, lastseen=%u, id=%s, name=%s\n", nodeInfoForPhone.num, nodeInfoForPhone.last_heard,
+                     nodeInfoForPhone.user.id, nodeInfoForPhone.user.long_name);
             fromRadioScratch.which_payload_variant = meshtastic_FromRadio_node_info_tag;
-            fromRadioScratch.node_info = *info;
+            fromRadioScratch.node_info = nodeInfoForPhone;
             // Stay in current state until done sending nodeinfos
+            nodeInfoForPhone.num = 0; // We just consumed a nodeinfo, will need a new one next time
         } else {
             LOG_INFO("Done sending nodeinfos\n");
             state = STATE_SEND_CHANNELS;
@@ -297,12 +304,16 @@ size_t PhoneAPI::getFromRadio(uint8_t *buf)
         break;
 
     case STATE_SEND_PACKETS:
-        // Do we have a message from the mesh?
+        // Do we have a message from the mesh or packet from the local device?
         LOG_INFO("getFromRadio=STATE_SEND_PACKETS\n");
         if (queueStatusPacketForPhone) {
             fromRadioScratch.which_payload_variant = meshtastic_FromRadio_queueStatus_tag;
             fromRadioScratch.queueStatus = *queueStatusPacketForPhone;
             releaseQueueStatusPhonePacket();
+        } else if (mqttClientProxyMessageForPhone) {
+            fromRadioScratch.which_payload_variant = meshtastic_FromRadio_mqttClientProxyMessage_tag;
+            fromRadioScratch.mqttClientProxyMessage = *mqttClientProxyMessageForPhone;
+            releaseMqttClientProxyPhonePacket();
         } else if (xmodemPacketForPhone.control != meshtastic_XModem_Control_NUL) {
             fromRadioScratch.which_payload_variant = meshtastic_FromRadio_xmodemPacket_tag;
             fromRadioScratch.xmodemPacket = xmodemPacketForPhone;
@@ -355,6 +366,14 @@ void PhoneAPI::releaseQueueStatusPhonePacket()
     }
 }
 
+void PhoneAPI::releaseMqttClientProxyPhonePacket()
+{
+    if (mqttClientProxyMessageForPhone) {
+        service.releaseMqttClientProxyMessageToPool(mqttClientProxyMessageForPhone);
+        mqttClientProxyMessageForPhone = NULL;
+    }
+}
+
 /**
  * Return true if we have data available to send to the phone
  */
@@ -372,14 +391,20 @@ bool PhoneAPI::available()
         return true;
 
     case STATE_SEND_NODEINFO:
-        if (!nodeInfoForPhone)
-            nodeInfoForPhone = nodeDB.readNextInfo();
+        if (nodeInfoForPhone.num == 0) {
+            auto nextNode = nodeDB.readNextMeshNode(readIndex);
+            if (nextNode) {
+                nodeInfoForPhone = ConvertToNodeInfo(nextNode);
+            }
+        }
         return true; // Always say we have something, because we might need to advance our state machine
 
     case STATE_SEND_PACKETS: {
         if (!queueStatusPacketForPhone)
             queueStatusPacketForPhone = service.getQueueStatusForPhone();
-        bool hasPacket = !!queueStatusPacketForPhone;
+        if (!mqttClientProxyMessageForPhone)
+            mqttClientProxyMessageForPhone = service.getMqttClientProxyMessageForPhone();
+        bool hasPacket = !!queueStatusPacketForPhone || !!mqttClientProxyMessageForPhone;
         if (hasPacket)
             return true;
 
@@ -423,8 +448,9 @@ int PhoneAPI::onNotify(uint32_t newValue)
     if (state == STATE_SEND_PACKETS) {
         LOG_INFO("Telling client we have new packets %u\n", newValue);
         onNowHasData(newValue);
-    } else
+    } else {
         LOG_DEBUG("(Client not yet interested in packets)\n");
+    }
 
     return 0;
-}
+}

src/mesh/PhoneAPI.h

@@ -50,14 +50,20 @@ class PhoneAPI
     // Keep QueueStatus packet just as packetForPhone
     meshtastic_QueueStatus *queueStatusPacketForPhone = NULL;
 
+    // Keep MqttClientProxyMessage packet just as packetForPhone
+    meshtastic_MqttClientProxyMessage *mqttClientProxyMessageForPhone = NULL;
+
     /// We temporarily keep the nodeInfo here between the call to available and getFromRadio
-    const meshtastic_NodeInfo *nodeInfoForPhone = NULL;
+    meshtastic_NodeInfo nodeInfoForPhone = meshtastic_NodeInfo_init_default;
 
     meshtastic_ToRadio toRadioScratch = {
         0}; // this is a static scratch object, any data must be copied elsewhere before returning
 
     /// Use to ensure that clients don't get confused about old messages from the radio
     uint32_t config_nonce = 0;
+    uint32_t readIndex = 0;
+
+    void resetReadIndex() { readIndex = 0; }
 
   public:
     PhoneAPI();
@@ -123,6 +129,8 @@ class PhoneAPI
 
     void releaseQueueStatusPhonePacket();
 
+    void releaseMqttClientProxyPhonePacket();
+
     /// begin a new connection
     void handleStartConfig();