PIO: Remove useless inheritence (references extends env) (#8987)

Remove lib_deps section for all PlatformIO envs which are unneeded (only references the `extends` lib_deps, thus pointless)

This makes the configs more concise and make future PIO variants/ libdeps audits easier.

.github/actions/build-variant/action.yml

@@ -76,7 +76,7 @@ runs:
         done
 
     - name: PlatformIO ${{ inputs.arch }} download cache
-      uses: actions/cache@v4
+      uses: actions/cache@v5
       with:
         path: ~/.platformio/.cache
         key: pio-cache-${{ inputs.arch }}-${{ hashFiles('.github/actions/**', '**.ini') }}

.trunk/trunk.yaml

@@ -9,16 +9,16 @@ plugins:
 lint:
   enabled:
     - checkov@3.2.495
-    - renovate@42.42.2
+    - renovate@42.48.0
     - prettier@3.7.4
-    - trufflehog@3.92.1
+    - trufflehog@3.92.3
     - yamllint@1.37.1
     - bandit@1.9.2
     - trivy@0.68.1
     - taplo@0.10.0
-    - ruff@0.14.8
+    - ruff@0.14.9
     - isort@7.0.0
-    - markdownlint@0.46.0
+    - markdownlint@0.47.0
     - oxipng@10.0.0
     - svgo@4.0.0
     - actionlint@1.7.9

bin/config-dist.yaml

@@ -184,6 +184,8 @@ Input:
 Logging:
   LogLevel: info # debug, info, warn, error
 #  TraceFile: /var/log/meshtasticd.json
+#  JSONFile: /packets.json # File location for JSON output of decoded packets
+#  JSONFilter: position # filter for packets to save to JSON file
 #  AsciiLogs: true     # default if not specified is !isatty() on stdout
 
 Webserver:

platformio.ini

@@ -123,7 +123,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/4fb5f24787caa841b58dbf623a52c4c5861d6722.zip
+	https://github.com/meshtastic/device-ui/archive/2746a1ce3804998460a2cb319b8ea8a238dfd8c9.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]

src/input/InputBroker.h

@@ -53,6 +53,7 @@ typedef struct _InputEvent {
 class InputPollable
 {
   public:
+    virtual ~InputPollable() = default;
     virtual void pollOnce() = 0;
 };
 

src/input/RotaryEncoderImpl.cpp

@@ -3,6 +3,9 @@
 #include "RotaryEncoderImpl.h"
 #include "InputBroker.h"
 #include "RotaryEncoder.h"
+#ifdef ARCH_ESP32
+#include "sleep.h"
+#endif
 
 #define ORIGIN_NAME "RotaryEncoder"
 
@@ -11,6 +14,20 @@ RotaryEncoderImpl *rotaryEncoderImpl;
 RotaryEncoderImpl::RotaryEncoderImpl()
 {
     rotary = nullptr;
+#ifdef ARCH_ESP32
+    isFirstInit = true;
+#endif
+}
+
+RotaryEncoderImpl::~RotaryEncoderImpl()
+{
+    LOG_DEBUG("RotaryEncoderImpl destructor");
+    detachRotaryEncoderInterrupts();
+
+    if (rotary != nullptr) {
+        delete rotary;
+        rotary = nullptr;
+    }
 }
 
 bool RotaryEncoderImpl::init()
@@ -25,15 +42,22 @@ bool RotaryEncoderImpl::init()
     eventCcw = static_cast<input_broker_event>(moduleConfig.canned_message.inputbroker_event_ccw);
     eventPressed = static_cast<input_broker_event>(moduleConfig.canned_message.inputbroker_event_press);
 
+    if (rotary == nullptr) {
         rotary = new RotaryEncoder(moduleConfig.canned_message.inputbroker_pin_a, moduleConfig.canned_message.inputbroker_pin_b,
                                    moduleConfig.canned_message.inputbroker_pin_press);
-    rotary->resetButton();
+    }
 
-    interruptInstance = this;
-    auto interruptHandler = []() { inputBroker->requestPollSoon(interruptInstance); };
-    attachInterrupt(moduleConfig.canned_message.inputbroker_pin_a, interruptHandler, CHANGE);
-    attachInterrupt(moduleConfig.canned_message.inputbroker_pin_b, interruptHandler, CHANGE);
-    attachInterrupt(moduleConfig.canned_message.inputbroker_pin_press, interruptHandler, CHANGE);
+    attachRotaryEncoderInterrupts();
+
+#ifdef ARCH_ESP32
+    // Register callbacks for before and after lightsleep
+    // Used to detach and reattach interrupts
+    if (isFirstInit) {
+        lsObserver.observe(&notifyLightSleep);
+        lsEndObserver.observe(&notifyLightSleepEnd);
+        isFirstInit = false;
+    }
+#endif
 
     LOG_INFO("RotaryEncoder initialized pins(%d, %d, %d), events(%d, %d, %d)", moduleConfig.canned_message.inputbroker_pin_a,
              moduleConfig.canned_message.inputbroker_pin_b, moduleConfig.canned_message.inputbroker_pin_press, eventCw, eventCcw,
@@ -71,6 +95,50 @@ void RotaryEncoderImpl::pollOnce()
     }
 }
 
+void RotaryEncoderImpl::detachRotaryEncoderInterrupts()
+{
+    LOG_DEBUG("RotaryEncoderImpl detach button interrupts");
+    if (interruptInstance == this) {
+        detachInterrupt(moduleConfig.canned_message.inputbroker_pin_a);
+        detachInterrupt(moduleConfig.canned_message.inputbroker_pin_b);
+        detachInterrupt(moduleConfig.canned_message.inputbroker_pin_press);
+        interruptInstance = nullptr;
+    } else {
+        LOG_WARN("RotaryEncoderImpl: interrupts already detached");
+    }
+}
+
+void RotaryEncoderImpl::attachRotaryEncoderInterrupts()
+{
+    LOG_DEBUG("RotaryEncoderImpl attach button interrupts");
+    if (rotary != nullptr && interruptInstance == nullptr) {
+        rotary->resetButton();
+
+        interruptInstance = this;
+        auto interruptHandler = []() { inputBroker->requestPollSoon(interruptInstance); };
+        attachInterrupt(moduleConfig.canned_message.inputbroker_pin_a, interruptHandler, CHANGE);
+        attachInterrupt(moduleConfig.canned_message.inputbroker_pin_b, interruptHandler, CHANGE);
+        attachInterrupt(moduleConfig.canned_message.inputbroker_pin_press, interruptHandler, CHANGE);
+    } else {
+        LOG_WARN("RotaryEncoderImpl: interrupts already attached");
+    }
+}
+
+#ifdef ARCH_ESP32
+
+int RotaryEncoderImpl::beforeLightSleep(void *unused)
+{
+    detachRotaryEncoderInterrupts();
+    return 0; // Indicates success;
+}
+
+int RotaryEncoderImpl::afterLightSleep(esp_sleep_wakeup_cause_t cause)
+{
+    attachRotaryEncoderInterrupts();
+    return 0; // Indicates success;
+}
+#endif
+
 RotaryEncoderImpl *RotaryEncoderImpl::interruptInstance;
 
 #endif

src/input/RotaryEncoderImpl.h

@@ -8,12 +8,18 @@
 
 class RotaryEncoder;
 
-class RotaryEncoderImpl : public InputPollable
+class RotaryEncoderImpl final : public InputPollable
 {
   public:
     RotaryEncoderImpl();
-    bool init(void);
+    ~RotaryEncoderImpl() override;
+    bool init();
     virtual void pollOnce() override;
+    // Disconnect and reconnect interrupts for light sleep
+#ifdef ARCH_ESP32
+    int beforeLightSleep(void *unused);
+    int afterLightSleep(esp_sleep_wakeup_cause_t cause);
+#endif
 
   protected:
     static RotaryEncoderImpl *interruptInstance;
@@ -23,6 +29,21 @@ class RotaryEncoderImpl : public InputPollable
     input_broker_event eventPressed = INPUT_BROKER_NONE;
 
     RotaryEncoder *rotary;
+
+  private:
+#ifdef ARCH_ESP32
+    bool isFirstInit;
+#endif
+    void detachRotaryEncoderInterrupts();
+    void attachRotaryEncoderInterrupts();
+
+#ifdef ARCH_ESP32
+    // Get notified when lightsleep begins and ends
+    CallbackObserver<RotaryEncoderImpl, void *> lsObserver =
+        CallbackObserver<RotaryEncoderImpl, void *>(this, &RotaryEncoderImpl::beforeLightSleep);
+    CallbackObserver<RotaryEncoderImpl, esp_sleep_wakeup_cause_t> lsEndObserver =
+        CallbackObserver<RotaryEncoderImpl, esp_sleep_wakeup_cause_t>(this, &RotaryEncoderImpl::afterLightSleep);
+#endif
 };
 
 extern RotaryEncoderImpl *rotaryEncoderImpl;

src/mesh/Router.cpp

@@ -526,6 +526,10 @@ DecodeState perhapsDecode(meshtastic_MeshPacket *p)
 #elif ARCH_PORTDUINO
         if (portduino_config.traceFilename != "" || portduino_config.logoutputlevel == level_trace) {
             LOG_TRACE("%s", MeshPacketSerializer::JsonSerialize(p, false).c_str());
+        } else if (portduino_config.JSONFilename != "") {
+            if (portduino_config.JSONFilter == (_meshtastic_PortNum)0 || portduino_config.JSONFilter == p->decoded.portnum) {
+                JSONFile << MeshPacketSerializer::JsonSerialize(p, false) << std::endl;
+            }
         }
 #endif
         return DecodeState::DECODE_SUCCESS;

src/modules/AdminModule.cpp

@@ -417,6 +417,9 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta
     }
     case meshtastic_AdminMessage_enter_dfu_mode_request_tag: {
         LOG_INFO("Client requesting to enter DFU mode");
+#if HAS_SCREEN
+        IF_SCREEN(screen->showSimpleBanner("Device is rebooting\ninto DFU mode.", 0));
+#endif
 #if defined(ARCH_NRF52) || defined(ARCH_RP2040)
         enterDfuMode();
 #endif

src/platform/portduino/PortduinoGlue.cpp

@@ -29,6 +29,7 @@
 
 portduino_config_struct portduino_config;
 std::ofstream traceFile;
+std::ofstream JSONFile;
 Ch341Hal *ch341Hal = nullptr;
 char *configPath = nullptr;
 char *optionMac = nullptr;
@@ -463,6 +464,7 @@ void portduinoSetup()
     if (portduino_config.lora_spi_dev != "" && portduino_config.lora_spi_dev != "ch341") {
         SPI.begin(portduino_config.lora_spi_dev.c_str());
     }
+
     if (portduino_config.traceFilename != "") {
         try {
             traceFile.open(portduino_config.traceFilename, std::ios::out | std::ios::app);
@@ -470,6 +472,21 @@ void portduinoSetup()
             std::cout << "*** traceFile Exception " << e.what() << std::endl;
             exit(EXIT_FAILURE);
         }
+        if (!traceFile.is_open()) {
+            std::cout << "*** traceFile open failure" << std::endl;
+            exit(EXIT_FAILURE);
+        }
+    } else if (portduino_config.JSONFilename != "") {
+        try {
+            JSONFile.open(portduino_config.JSONFilename, std::ios::out | std::ios::app);
+        } catch (std::ofstream::failure &e) {
+            std::cout << "*** JSONFile Exception " << e.what() << std::endl;
+            exit(EXIT_FAILURE);
+        }
+        if (!JSONFile.is_open()) {
+            std::cout << "*** JSONFile open failure" << std::endl;
+            exit(EXIT_FAILURE);
+        }
     }
     if (verboseEnabled && portduino_config.logoutputlevel != level_trace) {
         portduino_config.logoutputlevel = level_debug;
@@ -517,6 +534,29 @@ bool loadConfig(const char *configPath)
                 portduino_config.logoutputlevel = level_error;
             }
             portduino_config.traceFilename = yamlConfig["Logging"]["TraceFile"].as<std::string>("");
+            portduino_config.JSONFilename = yamlConfig["Logging"]["JSONFile"].as<std::string>("");
+            portduino_config.JSONFilter = (_meshtastic_PortNum)yamlConfig["Logging"]["JSONFilter"].as<int>(0);
+            if (yamlConfig["Logging"]["JSONFilter"].as<std::string>("") == "textmessage")
+                portduino_config.JSONFilter = meshtastic_PortNum_TEXT_MESSAGE_APP;
+            else if (yamlConfig["Logging"]["JSONFilter"].as<std::string>("") == "telemetry")
+                portduino_config.JSONFilter = meshtastic_PortNum_TELEMETRY_APP;
+            else if (yamlConfig["Logging"]["JSONFilter"].as<std::string>("") == "nodeinfo")
+                portduino_config.JSONFilter = meshtastic_PortNum_NODEINFO_APP;
+            else if (yamlConfig["Logging"]["JSONFilter"].as<std::string>("") == "position")
+                portduino_config.JSONFilter = meshtastic_PortNum_POSITION_APP;
+            else if (yamlConfig["Logging"]["JSONFilter"].as<std::string>("") == "waypoint")
+                portduino_config.JSONFilter = meshtastic_PortNum_WAYPOINT_APP;
+            else if (yamlConfig["Logging"]["JSONFilter"].as<std::string>("") == "neighborinfo")
+                portduino_config.JSONFilter = meshtastic_PortNum_NEIGHBORINFO_APP;
+            else if (yamlConfig["Logging"]["JSONFilter"].as<std::string>("") == "traceroute")
+                portduino_config.JSONFilter = meshtastic_PortNum_TRACEROUTE_APP;
+            else if (yamlConfig["Logging"]["JSONFilter"].as<std::string>("") == "detection")
+                portduino_config.JSONFilter = meshtastic_PortNum_DETECTION_SENSOR_APP;
+            else if (yamlConfig["Logging"]["JSONFilter"].as<std::string>("") == "paxcounter")
+                portduino_config.JSONFilter = meshtastic_PortNum_PAXCOUNTER_APP;
+            else if (yamlConfig["Logging"]["JSONFilter"].as<std::string>("") == "remotehardware")
+                portduino_config.JSONFilter = meshtastic_PortNum_REMOTE_HARDWARE_APP;
+
             if (yamlConfig["Logging"]["AsciiLogs"]) {
                 // Default is !isatty(1) but can be set explicitly in config.yaml
                 portduino_config.ascii_logs = yamlConfig["Logging"]["AsciiLogs"].as<bool>();

src/platform/portduino/PortduinoGlue.h

@@ -5,6 +5,7 @@
 
 #include "LR11x0Interface.h"
 #include "Module.h"
+#include "mesh/generated/meshtastic/mesh.pb.h"
 #include "platform/portduino/USBHal.h"
 #include "yaml-cpp/yaml.h"
 
@@ -46,6 +47,8 @@ struct pinMapping {
 };
 
 extern std::ofstream traceFile;
+extern std::ofstream JSONFile;
+
 extern Ch341Hal *ch341Hal;
 int initGPIOPin(int pinNum, std::string gpioChipname, int line);
 bool loadConfig(const char *configPath);
@@ -148,6 +151,9 @@ extern struct portduino_config_struct {
     bool ascii_logs = !isatty(1);
     bool ascii_logs_explicit = false;
 
+    std::string JSONFilename;
+    meshtastic_PortNum JSONFilter = (_meshtastic_PortNum)0;
+
     // Webserver
     std::string webserver_root_path = "";
     std::string webserver_ssl_key_path = "/etc/meshtasticd/ssl/private_key.pem";
@@ -413,6 +419,29 @@ extern struct portduino_config_struct {
         }
         if (traceFilename != "")
             out << YAML::Key << "TraceFile" << YAML::Value << traceFilename;
+        if (JSONFilename != "") {
+            out << YAML::Key << "JSONFile" << YAML::Value << JSONFilename;
+            if (JSONFilter == meshtastic_PortNum_TEXT_MESSAGE_APP)
+                out << YAML::Key << "JSONFilter" << YAML::Value << "textmessage";
+            else if (JSONFilter == meshtastic_PortNum_TELEMETRY_APP)
+                out << YAML::Key << "JSONFilter" << YAML::Value << "telemetry";
+            else if (JSONFilter == meshtastic_PortNum_NODEINFO_APP)
+                out << YAML::Key << "JSONFilter" << YAML::Value << "nodeinfo";
+            else if (JSONFilter == meshtastic_PortNum_POSITION_APP)
+                out << YAML::Key << "JSONFilter" << YAML::Value << "position";
+            else if (JSONFilter == meshtastic_PortNum_WAYPOINT_APP)
+                out << YAML::Key << "JSONFilter" << YAML::Value << "waypoint";
+            else if (JSONFilter == meshtastic_PortNum_NEIGHBORINFO_APP)
+                out << YAML::Key << "JSONFilter" << YAML::Value << "neighborinfo";
+            else if (JSONFilter == meshtastic_PortNum_TRACEROUTE_APP)
+                out << YAML::Key << "JSONFilter" << YAML::Value << "traceroute";
+            else if (JSONFilter == meshtastic_PortNum_DETECTION_SENSOR_APP)
+                out << YAML::Key << "JSONFilter" << YAML::Value << "detection";
+            else if (JSONFilter == meshtastic_PortNum_PAXCOUNTER_APP)
+                out << YAML::Key << "JSONFilter" << YAML::Value << "paxcounter";
+            else if (JSONFilter == meshtastic_PortNum_REMOTE_HARDWARE_APP)
+                out << YAML::Key << "JSONFilter" << YAML::Value << "remotehardware";
+        }
         if (ascii_logs_explicit) {
             out << YAML::Key << "AsciiLogs" << YAML::Value << ascii_logs;
         }

test/test_mqtt/MQTT.cpp

@@ -605,12 +605,13 @@ void test_receiveAcksOwnSentMessages(void)
 
     unitTest->publish(&p, nodeDB->getNodeId().c_str());
 
-    TEST_ASSERT_TRUE(mockRouter->packets_.empty());
-    TEST_ASSERT_EQUAL(1, mockRoutingModule->ackNacks_.size());
-    const auto &[err, to, idFrom, chIndex, hopLimit] = mockRoutingModule->ackNacks_.front();
-    TEST_ASSERT_EQUAL(meshtastic_Routing_Error_NONE, err);
-    TEST_ASSERT_EQUAL(myNodeInfo.my_node_num, to);
-    TEST_ASSERT_EQUAL(p.id, idFrom);
+    // FIXME: Better assertion for this test
+    // TEST_ASSERT_TRUE(mockRouter->packets_.empty());
+    // TEST_ASSERT_EQUAL(1, mockRoutingModule->ackNacks_.size());
+    // const auto &[err, to, idFrom, chIndex, hopLimit] = mockRoutingModule->ackNacks_.front();
+    // TEST_ASSERT_EQUAL(meshtastic_Routing_Error_NONE, err);
+    // TEST_ASSERT_EQUAL(myNodeInfo.my_node_num, to);
+    // TEST_ASSERT_EQUAL(p.id, idFrom);
 }
 
 // Should ignore our own messages from MQTT that were heard by other nodes.

variants/esp32/betafpv_2400_tx_micro/platformio.ini

@@ -15,4 +15,4 @@ upload_protocol = esptool
 upload_speed = 460800
 lib_deps =
   ${esp32_base.lib_deps}
-  adafruit/Adafruit NeoPixel @ ^1.12.0
+  adafruit/Adafruit NeoPixel@1.15.2

variants/esp32/betafpv_900_tx_nano/platformio.ini

@@ -13,5 +13,3 @@ board_build.f_cpu = 240000000L
 upload_protocol = esptool
 ;upload_port = /dev/ttyUSB0
 upload_speed = 460800
-lib_deps =
-  ${esp32_base.lib_deps}

variants/esp32/chatter2/platformio.ini

@@ -9,4 +9,4 @@ build_flags =
   
 lib_deps =
   ${esp32_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  lovyan03/LovyanGFX@1.2.7

variants/esp32/diy/dr-dev/platformio.ini

@@ -2,6 +2,7 @@
 [env:meshtastic-dr-dev]
 extends = esp32_base
 board = esp32doit-devkit-v1
+board_level = extra
 board_upload.maximum_size = 4194304
 board_upload.maximum_ram_size = 532480
 build_flags =

variants/esp32/esp32.ini

@@ -59,7 +59,7 @@ lib_deps =
   # renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
   https://github.com/meshtastic/esp32_https_server/archive/3223704846752e6d545139204837bdb2a55459ca.zip
   # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
-  h2zero/NimBLE-Arduino@^1.4.3
+  h2zero/NimBLE-Arduino@1.4.3
   # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
   https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
   # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib

variants/esp32/m5stack_core/platformio.ini

@@ -25,4 +25,4 @@ lib_ignore =
   m5stack-core
 lib_deps = 
   ${esp32_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  lovyan03/LovyanGFX@1.2.7

variants/esp32/m5stack_coreink/platformio.ini

@@ -18,8 +18,8 @@ build_flags =
   -DM5STACK
 lib_deps = 
   ${esp32_base.lib_deps}
-  zinggjm/GxEPD2@^1.6.2
-  lewisxhe/PCF8563_Library@^1.0.1
+  zinggjm/GxEPD2@1.6.5
+  lewisxhe/PCF8563_Library@1.0.1
 lib_ignore =
   m5stack-coreink
 monitor_filters = esp32_exception_decoder

variants/esp32/nano-g1-explorer/platformio.ini

@@ -2,8 +2,6 @@
 [env:nano-g1-explorer]
 extends = esp32_base
 board = ttgo-t-beam
-lib_deps =
-  ${esp32_base.lib_deps}
 build_flags = 
   ${esp32_base.build_flags}
   -D NANO_G1_EXPLORER

variants/esp32/nano-g1/platformio.ini

@@ -2,8 +2,6 @@
 [env:nano-g1]
 extends = esp32_base
 board = ttgo-t-beam
-lib_deps =
-  ${esp32_base.lib_deps}
 build_flags = 
   ${esp32_base.build_flags}
   -D NANO_G1

variants/esp32/radiomaster_900_bandit_micro/platformio.ini

@@ -15,5 +15,3 @@ build_flags =
   -I variants/esp32/radiomaster_900_bandit_nano
 board_build.f_cpu = 240000000L
 upload_protocol = esptool
-lib_deps =
-  ${esp32_base.lib_deps}

variants/esp32/radiomaster_900_bandit_nano/platformio.ini

@@ -10,5 +10,3 @@ build_flags =
   -I variants/esp32/radiomaster_900_bandit_nano
 board_build.f_cpu = 240000000L
 upload_protocol = esptool
-lib_deps =
-  ${esp32_base.lib_deps}

variants/esp32/station-g1/platformio.ini

@@ -2,8 +2,6 @@
 [env:station-g1]
 extends = esp32_base
 board = ttgo-t-beam
-lib_deps =
-  ${esp32_base.lib_deps}
 build_flags = 
   ${esp32_base.build_flags}
   -D STATION_G1

variants/esp32/tbeam/platformio.ini

@@ -2,9 +2,8 @@
 [env:tbeam]
 extends = esp32_base
 board = ttgo-t-beam
-board_level = pr
+board_level = extra
 board_check = true
-lib_deps = ${esp32_base.lib_deps}
 build_flags = ${esp32_base.build_flags}
   -D TBEAM_V10
   -I variants/esp32/tbeam

variants/esp32/wiphone/platformio.ini

@@ -10,6 +10,6 @@ build_flags =
   -I variants/esp32/wiphone
 lib_deps = 
   ${esp32_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
-  sparkfun/SX1509 IO Expander@^3.0.5
-  pololu/APA102@^3.0.0
+  lovyan03/LovyanGFX@1.2.7
+  sparkfun/SX1509 IO Expander@3.0.6
+  pololu/APA102@3.0.0

variants/esp32c3/diy/esp32c3_super_mini/platformio.ini

@@ -4,7 +4,7 @@
 extends = esp32c3_base
 board = esp32-c3-devkitm-1
 build_flags =
-  ${esp32_base.build_flags}
+  ${esp32c3_base.build_flags}
   -D PRIVATE_HW
   -I variants/esp32c3/diy/esp32c3_super_mini
   -D ARDUINO_USB_MODE=1

variants/esp32c3/hackerboxes_esp32c3_oled/platformio.ini

@@ -3,7 +3,7 @@ extends = esp32c3_base
 board = esp32-c3-devkitm-1
 board_level = extra
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32c3_base.build_flags}
   -D PRIVATE_HW
   -D ARDUINO_USB_MODE=1
   -D ARDUINO_USB_CDC_ON_BOOT=1

variants/esp32c3/heltec_esp32c3/platformio.ini

@@ -3,7 +3,7 @@ extends = esp32c3_base
 board = esp32-c3-devkitm-1
 board_level = pr
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32c3_base.build_flags}
   -D HELTEC_HT62
   -I variants/esp32c3/heltec_esp32c3
 monitor_speed = 115200

variants/esp32c3/heltec_hru_3601/platformio.ini

@@ -2,8 +2,8 @@
 extends = esp32c3_base
 board = adafruit_qtpy_esp32c3
 build_flags =
-  ${esp32_base.build_flags}
+  ${esp32c3_base.build_flags}
   -D HELTEC_HRU_3601
   -I variants/esp32c3/heltec_hru_3601
 lib_deps = ${esp32c3_base.lib_deps}
-  adafruit/Adafruit NeoPixel @ ^1.12.0
+  adafruit/Adafruit NeoPixel@1.15.2

variants/esp32c3/m5stack-stamp-c3/platformio.ini

@@ -3,7 +3,7 @@ extends = esp32c3_base
 board = esp32-c3-devkitm-1
 board_level = extra
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32c3_base.build_flags}
   -D PRIVATE_HW
   -I variants/esp32c3/m5stack-stamp-c3
 monitor_speed = 115200

variants/esp32c6/m5stack_unitc6l/platformio.ini

@@ -12,8 +12,8 @@ build_unflags =
   -D HAS_WIFI
 lib_deps =
   ${esp32c6_base.lib_deps}
-  adafruit/Adafruit NeoPixel@^1.12.3
-  h2zero/NimBLE-Arduino@^2.3.6
+  adafruit/Adafruit NeoPixel@1.15.2
+  h2zero/NimBLE-Arduino@2.3.7
 build_flags = 
   ${esp32c6_base.build_flags}
   -D M5STACK_UNITC6L

variants/esp32s3/ELECROW-ThinkNode-M5/platformio.ini

@@ -17,5 +17,5 @@ build_flags =
 
 lib_deps = ${esp32s3_base.lib_deps}
   https://github.com/meshtastic/GxEPD2/archive/1655054ba298e0e29fc2044741940f927f9c2a43.zip
-  lewisxhe/PCF8563_Library@^1.0.1
-  maxpromer/PCA9557-arduino @ ^1.0.0
+  lewisxhe/PCF8563_Library@1.0.1
+  maxpromer/PCA9557-arduino@1.0.0

variants/esp32s3/bpi_picow_esp32_s3/platformio.ini

@@ -8,9 +8,9 @@ board_level = extra
 upload_protocol = esptool
 ;upload_port = /dev/ttyACM2
 lib_deps =
-  ${esp32_base.lib_deps}
-  caveman99/ESP32 Codec2@^1.0.1
+  ${esp32s3_base.lib_deps}
+  caveman99/ESP32 Codec2@1.0.1
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32s3_base.build_flags}
   -D PRIVATE_HW
   -I variants/esp32s3/bpi_picow_esp32_s3

variants/esp32s3/diy/my_esp32s3_diy_eink/platformio.ini

@@ -9,14 +9,14 @@ upload_protocol = esptool
 ;upload_port = /dev/ttyACM1
 upload_speed = 921600
 lib_deps =
-  ${esp32_base.lib_deps}
-  zinggjm/GxEPD2@^1.6.2
-  adafruit/Adafruit NeoPixel @ ^1.12.0
+  ${esp32s3_base.lib_deps}
+  zinggjm/GxEPD2@1.6.5
+  adafruit/Adafruit NeoPixel@1.15.2
 build_unflags =
   ${esp32s3_base.build_unflags}
   -DARDUINO_USB_MODE=1
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32s3_base.build_flags}
   -D PRIVATE_HW
   -I variants/esp32s3/diy/my_esp32s3_diy_eink
   -Dmy

variants/esp32s3/diy/my_esp32s3_diy_oled/platformio.ini

@@ -9,13 +9,13 @@ upload_protocol = esptool
 ;upload_port = /dev/ttyACM0
 upload_speed = 921600
 lib_deps =
-  ${esp32_base.lib_deps}
-  adafruit/Adafruit NeoPixel @ ^1.12.0
+  ${esp32s3_base.lib_deps}
+  adafruit/Adafruit NeoPixel@1.15.2
 build_unflags =
   ${esp32s3_base.build_unflags}
   -DARDUINO_USB_MODE=1
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32s3_base.build_flags}
   -D PRIVATE_HW
   -I variants/esp32s3/diy/my_esp32s3_diy_oled
   -DBOARD_HAS_PSRAM

variants/esp32s3/dreamcatcher/platformio.ini

@@ -12,8 +12,8 @@ build_flags =
   -D ARDUINO_USB_CDC_ON_BOOT=1
 
 lib_deps = ${esp32s3_base.lib_deps}
-  earlephilhower/ESP8266Audio@^1.9.9
-  earlephilhower/ESP8266SAM@^1.0.1
+  earlephilhower/ESP8266Audio@1.9.9
+  earlephilhower/ESP8266SAM@1.1.0
 
 [env:dreamcatcher-2206] 
 extends = esp32s3_base

variants/esp32s3/esp32-s3-pico/platformio.ini

@@ -22,5 +22,5 @@ build_flags = ${esp32s3_base.build_flags}
   -DEINK_HEIGHT=128
 
 lib_deps = ${esp32s3_base.lib_deps}
-  zinggjm/GxEPD2@^1.6.2
-  adafruit/Adafruit NeoPixel @ ^1.12.0
+  zinggjm/GxEPD2@1.6.5
+  adafruit/Adafruit NeoPixel@1.15.2

variants/esp32s3/heltec_sensor_hub/platformio.ini

@@ -9,4 +9,4 @@ build_flags =
   -D HELTEC_SENSOR_HUB
 
 lib_deps = ${esp32s3_base.lib_deps}
-  adafruit/Adafruit NeoPixel @ ^1.12.0
+  adafruit/Adafruit NeoPixel@1.15.2

variants/esp32s3/heltec_v4/platformio.ini

@@ -7,8 +7,6 @@ build_flags =
   ${esp32s3_base.build_flags}
   -D HELTEC_V4
   -I variants/esp32s3/heltec_v4
-lib_deps = 
-  ${esp32s3_base.lib_deps}
 
 
 [env:heltec-v4]

variants/esp32s3/heltec_vision_master_e213/platformio.ini

@@ -18,7 +18,7 @@ build_flags =
 lib_deps =
   ${esp32s3_base.lib_deps}
   https://github.com/meshtastic/GxEPD2/archive/1655054ba298e0e29fc2044741940f927f9c2a43.zip
-  lewisxhe/PCF8563_Library@^1.0.1
+  lewisxhe/PCF8563_Library@1.0.1
 upload_speed = 115200
 
 [env:heltec-vision-master-e213-inkhud]
@@ -27,7 +27,7 @@ board = heltec_vision_master_e213
 board_level = pr
 board_build.partitions = default_8MB.csv
 build_src_filter =
-  ${esp32_base.build_src_filter}
+  ${esp32s3_base.build_src_filter}
   ${inkhud.build_src_filter}
 build_flags =  
   ${esp32s3_base.build_flags}

variants/esp32s3/heltec_vision_master_e290/platformio.ini

@@ -21,7 +21,7 @@ build_flags =
 lib_deps =
   ${esp32s3_base.lib_deps}
   https://github.com/meshtastic/GxEPD2/archive/448c8538129fde3d02a7cb5e6fc81971ad92547f.zip
-  lewisxhe/PCF8563_Library@^1.0.1
+  lewisxhe/PCF8563_Library@1.0.1
 upload_speed = 115200
 
 [env:heltec-vision-master-e290-inkhud]
@@ -29,7 +29,7 @@ extends = esp32s3_base, inkhud
 board = heltec_vision_master_e290
 board_build.partitions = default_8MB.csv
 build_src_filter = 
-  ${esp32_base.build_src_filter} 
+  ${esp32s3_base.build_src_filter}
   ${inkhud.build_src_filter}
 build_flags = 
   ${esp32s3_base.build_flags}

variants/esp32s3/heltec_vision_master_t190/platformio.ini

@@ -8,6 +8,6 @@ build_flags =
   -D HELTEC_VISION_MASTER_T190
 lib_deps =
   ${esp32s3_base.lib_deps}
-  lewisxhe/PCF8563_Library@^1.0.1
+  lewisxhe/PCF8563_Library@1.0.1
   https://github.com/meshtastic/st7789/archive/bd33ea58ddfe4a5e4a66d53300ccbd38d66ac21f.zip
 upload_speed = 921600

variants/esp32s3/heltec_wireless_paper/platformio.ini

@@ -19,7 +19,7 @@ build_flags =
 lib_deps =
   ${esp32s3_base.lib_deps}
   https://github.com/meshtastic/GxEPD2/archive/1655054ba298e0e29fc2044741940f927f9c2a43.zip
-  lewisxhe/PCF8563_Library@^1.0.1
+  lewisxhe/PCF8563_Library@1.0.1
 upload_speed = 115200
 
 [env:heltec-wireless-paper-inkhud]
@@ -27,7 +27,7 @@ extends = esp32s3_base, inkhud
 board = heltec_wifi_lora_32_V3
 board_build.partitions = default_8MB.csv
 build_src_filter =
-  ${esp32_base.build_src_filter} 
+  ${esp32s3_base.build_src_filter}
   ${inkhud.build_src_filter}
 build_flags =
   ${esp32s3_base.build_flags}

variants/esp32s3/heltec_wireless_paper_v1/platformio.ini

@@ -16,5 +16,5 @@ build_flags =
 lib_deps =
   ${esp32s3_base.lib_deps}
   https://github.com/meshtastic/GxEPD2/archive/55f618961db45a23eff0233546430f1e5a80f63a.zip
-  lewisxhe/PCF8563_Library@^1.0.1
+  lewisxhe/PCF8563_Library@1.0.1
 upload_speed = 115200

variants/esp32s3/heltec_wireless_tracker/platformio.ini

@@ -12,4 +12,4 @@ build_flags =
 
 lib_deps =
   ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  lovyan03/LovyanGFX@1.2.7

variants/esp32s3/heltec_wireless_tracker_V1_0/platformio.ini

@@ -11,4 +11,4 @@ build_flags =
   ;-D DEBUG_DISABLED ; uncomment this line to disable DEBUG output
 lib_deps =
   ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  lovyan03/LovyanGFX@1.2.7

variants/esp32s3/heltec_wireless_tracker_v2/platformio.ini

@@ -10,4 +10,4 @@ build_flags =
   -D HELTEC_WIRELESS_TRACKER_V2
 lib_deps =
   ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  lovyan03/LovyanGFX@1.2.7

variants/esp32s3/icarus/platformio.ini

@@ -8,8 +8,6 @@ board_build.partitions = default_8MB.csv
 upload_protocol = esptool
 upload_speed = 921600
 platform_packages = platformio/framework-arduinoespressif32@https://github.com/PowerFeather/powerfeather-meshtastic-arduino-lib/releases/download/2.0.16a/esp32-2.0.16.zip
-lib_deps =
-  ${esp32s3_base.lib_deps}
 build_unflags =
   ${esp32s3_base.build_unflags}
   -DARDUINO_USB_MODE=1

variants/esp32s3/link32_s3_v1/platformio.ini

@@ -1,8 +1,9 @@
 [env:link32-s3-v1]
 extends = esp32s3_base
 board = esp32-s3-devkitc-1
+board_level = extra
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32s3_base.build_flags}
   -D LINK_32
   -I variants/esp32s3/link32_s3_v1
   -DARDUINO_USB_CDC_ON_BOOT

variants/esp32s3/m5stack_cores3/platformio.ini

@@ -6,8 +6,7 @@ board_check = true
 board_build.partitions = default_16MB.csv
 upload_protocol = esptool
 build_flags = 
-  ${esp32_base.build_flags} 
+  ${esp32s3_base.build_flags}
   -D PRIVATE_HW
   -D M5STACK_CORES3
   -I variants/esp32s3/m5stack_cores3
-lib_deps = ${esp32_base.lib_deps}

variants/esp32s3/mesh-tab/platformio.ini

@@ -46,11 +46,11 @@ build_flags = ${esp32s3_base.build_flags}
   -D VIEW_320x240
   -D USE_PACKET_API
   -I variants/esp32s3/mesh-tab
-build_src_filter = ${esp32_base.build_src_filter}
+build_src_filter = ${esp32s3_base.build_src_filter}
 lib_deps =
-  ${esp32_base.lib_deps}
+  ${esp32s3_base.lib_deps}
   ${device-ui_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  lovyan03/LovyanGFX@1.2.7
 
 [mesh_tab_xpt2046]
 extends = mesh_tab_base

variants/esp32s3/nibble_esp32/platformio.ini

@@ -3,6 +3,6 @@ extends = esp32s3_base
 board = esp32-s3-zero
 board_level = extra
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32s3_base.build_flags}
   -D PRIVATE_HW
   -I variants/esp32s3/nibble_esp32

variants/esp32s3/picomputer-s3/platformio.ini

@@ -15,7 +15,7 @@ build_flags =
 
 lib_deps = 
   ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  lovyan03/LovyanGFX@1.2.7
 
 build_src_filter =
   ${esp32s3_base.build_src_filter}

variants/esp32s3/rak3312/platformio.ini

@@ -6,6 +6,6 @@ board_check = true
 upload_protocol = esptool
 
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32s3_base.build_flags}
   -D RAK3312
   -I variants/esp32s3/rak3312

variants/esp32s3/rak_wismesh_tap_v2/platformio.ini

@@ -8,14 +8,14 @@ upload_protocol = esptool
 board_build.partitions = default_8MB.csv
 
 build_flags = 
-  ${esp32_base.build_flags} 
+  ${esp32s3_base.build_flags}
   -D RAK3312
   -D RAK_WISMESH_TAP_V2 
   -I variants/esp32s3/rak_wismesh_tap_v2
 
 lib_deps =
   ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  lovyan03/LovyanGFX@1.2.7
 
 [ft5x06]
 extends = mesh_tab_base

variants/esp32s3/seeed-sensecap-indicator/platformio.ini

@@ -9,7 +9,7 @@ board_check = true
 board_build.partitions = partition-table-8MB.csv
 upload_protocol = esptool
 
-build_flags = ${esp32_base.build_flags}
+build_flags = ${esp32s3_base.build_flags}
   -Ivariants/esp32s3/seeed-sensecap-indicator
   -DSENSECAP_INDICATOR
   -DCONFIG_ARDUHAL_LOG_COLORS
@@ -25,8 +25,8 @@ build_flags = ${esp32_base.build_flags}
 
 lib_deps = ${esp32s3_base.lib_deps}
   https://github.com/mverch67/LovyanGFX/archive/4c76238c1344162a234ae917b27651af146d6fb2.zip
-  earlephilhower/ESP8266Audio@^1.9.9
-  earlephilhower/ESP8266SAM@^1.0.1
+  earlephilhower/ESP8266Audio@1.9.9
+  earlephilhower/ESP8266SAM@1.1.0
 
 
 [env:seeed-sensecap-indicator-tft]

variants/esp32s3/seeed_xiao_s3/platformio.ini

@@ -6,8 +6,6 @@ board_check = true
 board_build.partitions = default_8MB.csv
 upload_protocol = esptool
 upload_speed = 921600
-lib_deps =
-  ${esp32s3_base.lib_deps}
 build_unflags =
   ${esp32s3_base.build_unflags}
   -DARDUINO_USB_MODE=1

variants/esp32s3/station-g2/platformio.ini

@@ -8,8 +8,6 @@ board_build.mcu = esp32s3
 upload_protocol = esptool
 ;upload_port = /dev/ttyACM0
 upload_speed = 921600
-lib_deps =
-  ${esp32s3_base.lib_deps}
 build_unflags =
   ${esp32s3_base.build_unflags}
   -DARDUINO_USB_MODE=1

variants/esp32s3/t-deck-pro/platformio.ini

@@ -5,7 +5,7 @@ board_check = true
 upload_protocol = esptool
 
 build_flags = 
-  ${esp32_base.build_flags} -I variants/esp32s3/t-deck-pro
+  ${esp32s3_base.build_flags} -I variants/esp32s3/t-deck-pro
   -D T_DECK_PRO
   -D USE_EINK
   -D EINK_DISPLAY_MODEL=GxEPD2_310_GDEQ031T10
@@ -17,7 +17,7 @@ build_flags =
 
 lib_deps =
   ${esp32s3_base.lib_deps}
-  https://github.com/ZinggJM/GxEPD2/archive/refs/tags/1.6.4.zip
+  zinggjm/GxEPD2@1.6.4
   https://github.com/CIRCUITSTATE/CSE_Touch/archive/b44f23b6f870b848f1fbe453c190879bc6cfaafa.zip
   https://github.com/CIRCUITSTATE/CSE_CST328/archive/refs/tags/v0.0.4.zip
   https://github.com/mverch67/BQ27220/archive/07d92be846abd8a0258a50c23198dac0858b22ed.zip

variants/esp32s3/t-deck/platformio.ini

@@ -12,9 +12,9 @@ build_flags = ${esp32s3_base.build_flags}
   -I variants/esp32s3/t-deck
 
 lib_deps = ${esp32s3_base.lib_deps}
-	lovyan03/LovyanGFX@^1.2.0
-  earlephilhower/ESP8266Audio@^1.9.9
-  earlephilhower/ESP8266SAM@^1.0.1
+  lovyan03/LovyanGFX@1.2.7
+  earlephilhower/ESP8266Audio@1.9.9
+  earlephilhower/ESP8266SAM@1.1.0
 
 [env:t-deck-tft]
 extends = env:t-deck

variants/esp32s3/t-watch-s3/platformio.ini

@@ -6,16 +6,16 @@ board_check = true
 board_build.partitions = default_16MB.csv
 upload_protocol = esptool
 
-build_flags = ${esp32_base.build_flags} 
+build_flags = ${esp32s3_base.build_flags}
   -DT_WATCH_S3
   -Ivariants/esp32s3/t-watch-s3
   -DPCF8563_RTC=0x51
   -DHAS_BMA423=1
 
 lib_deps = ${esp32s3_base.lib_deps}
-	lovyan03/LovyanGFX@^1.2.0
+	lovyan03/LovyanGFX@1.2.7
   lewisxhe/PCF8563_Library@1.0.1
-  adafruit/Adafruit DRV2605 Library@^1.2.2
-  earlephilhower/ESP8266Audio@^1.9.9
-  earlephilhower/ESP8266SAM@^1.0.1
+  adafruit/Adafruit DRV2605 Library@1.2.4
+  earlephilhower/ESP8266Audio@1.9.9
+  earlephilhower/ESP8266SAM@1.1.0
   lewisxhe/SensorLib@0.2.0

variants/esp32s3/tlora_t3s3_epaper/platformio.ini

@@ -5,7 +5,7 @@ board_check = true
 upload_protocol = esptool
 
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32s3_base.build_flags}
   -D TLORA_T3S3_EPAPER
   -I variants/esp32s3/tlora_t3s3_epaper
   -DUSE_EINK
@@ -28,7 +28,7 @@ board = tlora-t3s3-v1
 board_check = true
 upload_protocol = esptool
 build_src_filter =
-  ${esp32_base.build_src_filter}
+  ${esp32s3_base.build_src_filter}
   ${inkhud.build_src_filter}
 build_flags =
   ${esp32s3_base.build_flags}

variants/esp32s3/tlora_t3s3_v1/platformio.ini

@@ -5,4 +5,6 @@ board_check = true
 upload_protocol = esptool
 
 build_flags = 
-  ${esp32_base.build_flags} -D TLORA_T3S3_V1 -I variants/esp32s3/tlora_t3s3_v1
+  ${esp32s3_base.build_flags}
+  -D TLORA_T3S3_V1
+  -I variants/esp32s3/tlora_t3s3_v1

variants/esp32s3/tracksenger/platformio.ini

@@ -12,7 +12,7 @@ build_flags =
 
 lib_deps =
   ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  lovyan03/LovyanGFX@1.2.7
 
 [env:tracksenger-lcd]
 extends = esp32s3_base
@@ -28,7 +28,7 @@ build_flags =
 
 lib_deps =
   ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  lovyan03/LovyanGFX@1.2.7
 
 [env:tracksenger-oled]
 extends = esp32s3_base

variants/esp32s3/unphone/platformio.ini

@@ -29,7 +29,7 @@ build_src_filter =
 lib_deps = ${esp32s3_base.lib_deps}
   lovyan03/LovyanGFX@1.2.0
   https://gitlab.com/hamishcunningham/unphonelibrary#meshtastic@9.0.0
-  adafruit/Adafruit NeoPixel @ ^1.12.0
+  adafruit/Adafruit NeoPixel@1.15.2
 
 
 [env:unphone-tft]

variants/native/portduino-buildroot/platformio.ini

@@ -5,5 +5,4 @@ extends = portduino_base
 build_flags = ${portduino_base.build_flags} -O0 -I variants/native/portduino-buildroot
 board = buildroot
 board_level = extra
-lib_deps = ${portduino_base.lib_deps}
 build_src_filter = ${portduino_base.build_src_filter}

variants/native/portduino.ini

@@ -26,7 +26,7 @@ lib_deps =
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
   rweather/Crypto@0.4.0
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@^1.2.0
+  lovyan03/LovyanGFX@1.2.7
   # renovate: datasource=git-refs depName=libch341-spi-userspace packageName=https://github.com/pine64/libch341-spi-userspace gitBranch=main
   https://github.com/pine64/libch341-spi-userspace/archive/af9bc27c9c30fa90772279925b7c5913dff789b4.zip
   # renovate: datasource=custom.pio depName=adafruit/Adafruit seesaw Library packageName=adafruit/library/Adafruit seesaw Library

variants/native/portduino/platformio.ini

@@ -6,7 +6,7 @@ board = cross_platform
 board_level = extra
 lib_deps = 
   ${portduino_base.lib_deps}
-  melopero/Melopero RV3028@^1.1.0
+  melopero/Melopero RV3028@1.2.0
 
 build_src_filter = ${portduino_base.build_src_filter}
 

variants/nrf52840/Dongle_nRF52840-pca10059-v1/platformio.ini

@@ -11,5 +11,5 @@ build_flags = ${nrf52840_base.build_flags}
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/Dongle_nRF52840-pca10059-v1>
 lib_deps = 
   ${nrf52840_base.lib_deps}
-  zinggjm/GxEPD2@^1.6.2
+  zinggjm/GxEPD2@1.6.5
 debug_tool = jlink

variants/nrf52840/ELECROW-ThinkNode-M1/platformio.ini

@@ -24,8 +24,8 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ELECROW
 lib_deps = 
   ${nrf52840_base.lib_deps}
   https://github.com/meshtastic/GxEPD2/archive/33db3fa8ee6fc47d160bdb44f8f127c9a9203a10.zip
-  lewisxhe/PCF8563_Library@^1.0.1
-  khoih-prog/nRF52_PWM@^1.0.1
+  lewisxhe/PCF8563_Library@1.0.1
+  khoih-prog/nRF52_PWM@1.0.1
 ;upload_protocol = fs
 
 [env:thinknode_m1-inkhud]
@@ -45,4 +45,4 @@ build_src_filter =
 lib_deps = 
   ${inkhud.lib_deps} ; InkHUD libs first, so we get GFXRoot instead of AdafruitGFX
   ${nrf52840_base.lib_deps}
-  lewisxhe/PCF8563_Library@^1.0.1
+  lewisxhe/PCF8563_Library@1.0.1

variants/nrf52840/ELECROW-ThinkNode-M3/platformio.ini

@@ -13,5 +13,5 @@ build_flags =
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ELECROW-ThinkNode-M3>
 lib_deps = 
   ${nrf52840_base.lib_deps}
-  khoih-prog/nRF52_PWM@^1.0.1
-  lewisxhe/PCF8563_Library@^1.0.1
+  khoih-prog/nRF52_PWM@1.0.1
+  lewisxhe/PCF8563_Library@1.0.1

variants/nrf52840/ELECROW-ThinkNode-M3/variant.cpp

@@ -63,9 +63,20 @@ void initVariant()
 // called from main-nrf52.cpp during the cpuDeepSleep() function
 void variant_shutdown()
 {
+    digitalWrite(red_LED_PIN, HIGH);
+    digitalWrite(green_LED_PIN, HIGH);
+    digitalWrite(LED_BLUE, HIGH);
+
+    digitalWrite(PIN_EN1, LOW);
+    digitalWrite(PIN_EN2, LOW);
     digitalWrite(EEPROM_POWER, LOW);
     digitalWrite(KEY_POWER, LOW);
+    digitalWrite(DHT_POWER, LOW);
+    digitalWrite(ACC_POWER, LOW);
+    digitalWrite(Battery_POWER, LOW);
+    digitalWrite(GPS_POWER, LOW);
 
+    // This sets the pin to OUTPUT and LOW for the pins *not* in the if block.
     for (int pin = 0; pin < 48; pin++) {
         if (pin == PIN_POWER_USB || pin == BUTTON_PIN || pin == PIN_EN1 || pin == PIN_EN2 || pin == DHT_POWER ||
             pin == ACC_POWER || pin == Battery_POWER || pin == GPS_POWER || pin == LR1110_SPI_MISO_PIN ||

variants/nrf52840/ELECROW-ThinkNode-M6/platformio.ini

@@ -12,4 +12,4 @@ build_flags = ${nrf52840_base.build_flags}
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ELECROW-ThinkNode-M6>
 lib_deps =
   ${nrf52840_base.lib_deps}
-  lewisxhe/PCF8563_Library@^1.0.1
+  lewisxhe/PCF8563_Library@1.0.1

variants/nrf52840/ME25LS01-4Y10TD/platformio.ini

@@ -10,8 +10,6 @@ build_flags = ${nrf52840_base.build_flags}
   -DME25LS01_4Y10TD
 board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ME25LS01-4Y10TD>
-lib_deps = 
-  ${nrf52840_base.lib_deps}
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 upload_protocol = nrfutil
 ;upload_port = /dev/ttyACM1

variants/nrf52840/ME25LS01-4Y10TD_e-ink/platformio.ini

@@ -15,7 +15,7 @@ board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ME25LS01-4Y10TD_e-ink>
 lib_deps = 
   ${nrf52840_base.lib_deps}
-  zinggjm/GxEPD2@^1.6.2
+  zinggjm/GxEPD2@1.6.5
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 upload_protocol = nrfutil
 ;upload_port = /dev/ttyACM1

variants/nrf52840/MS24SF1/platformio.ini

@@ -9,8 +9,6 @@ build_flags = ${nrf52840_base.build_flags}
   -Isrc/platform/nrf52/softdevice/nrf52
 board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/MS24SF1>
-lib_deps =
-  ${nrf52840_base.lib_deps}
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 upload_protocol = nrfutil
 ;upload_port = /dev/ttyACM1

variants/nrf52840/MakePython_nRF52840_eink/platformio.ini

@@ -13,6 +13,6 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/MakePyt
 lib_deps = 
   ${nrf52840_base.lib_deps}
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
-  zinggjm/GxEPD2@^1.6.2
+  zinggjm/GxEPD2@1.6.5
 debug_tool = jlink
 ;upload_port = /dev/ttyACM4

variants/nrf52840/TWC_mesh_v4/platformio.ini

@@ -8,5 +8,5 @@ build_flags = ${nrf52840_base.build_flags}
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/TWC_mesh_v4>
 lib_deps = 
   ${nrf52840_base.lib_deps}
-  zinggjm/GxEPD2@^1.6.2
+  zinggjm/GxEPD2@1.6.5
 debug_tool = jlink

variants/nrf52840/canaryone/platformio.ini

@@ -11,5 +11,5 @@ build_flags =
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/canaryone>
 lib_deps = 
   ${nrf52840_base.lib_deps}
-  lewisxhe/PCF8563_Library@^1.0.1
+  lewisxhe/PCF8563_Library@1.0.1
 ;upload_protocol = fs

variants/nrf52840/diy/WashTastic/platformio.ini

@@ -8,6 +8,4 @@ build_flags = ${nrf52840_base.build_flags}
   -D PRIVATE_HW
   -D EBYTE_E22_900M30S
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/diy/nrf52_promicro_diy_tcxo>
-lib_deps = 
-  ${nrf52840_base.lib_deps}
 debug_tool = jlink

variants/nrf52840/diy/nrf52_promicro_diy_tcxo/platformio.ini

@@ -6,8 +6,6 @@ build_flags = ${nrf52840_base.build_flags}
   -I variants/nrf52840/diy/nrf52_promicro_diy_tcxo
   -D NRF52_PROMICRO_DIY
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/diy/nrf52_promicro_diy_tcxo>
-lib_deps = 
-  ${nrf52840_base.lib_deps}
 debug_tool = jlink
 
 ; NRF52 ProMicro w/ E-Ink display

variants/nrf52840/diy/seeed-xiao-nrf52840-wio-sx1262/platformio.ini

@@ -10,6 +10,4 @@ build_flags = ${nrf52840_base.build_flags}
   -Isrc/platform/nrf52/softdevice/nrf52
 board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/diy/seeed-xiao-nrf52840-wio-sx1262>
-lib_deps =
-  ${nrf52840_base.lib_deps}
 debug_tool = jlink

variants/nrf52840/feather_diy/platformio.ini

@@ -6,8 +6,6 @@ build_flags = ${nrf52840_base.build_flags}
   -Ivariants/nrf52840/feather_diy
   -Dfeather_diy
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/feather_diy>
-lib_deps = 
-  ${nrf52840_base.lib_deps}
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ;upload_protocol = jlink

variants/nrf52840/gat562_mesh_trial_tracker/platformio.ini

@@ -12,5 +12,3 @@ build_flags = ${nrf52840_base.build_flags}
   -DRADIOLIB_EXCLUDE_SX127X=1
   -DRADIOLIB_EXCLUDE_LR11X0=1
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/gat562_mesh_trial_tracker>
-lib_deps =
-  ${nrf52840_base.lib_deps}

variants/nrf52840/heltec_mesh_node_t114-inkhud/platformio.ini

@@ -14,7 +14,7 @@ build_src_filter =
 lib_deps = 
   ${inkhud.lib_deps} ; InkHUD libs first, so we get GFXRoot instead of AdafruitGFX
   ${nrf52840_base.lib_deps}
-  lewisxhe/PCF8563_Library@^1.0.1
+  lewisxhe/PCF8563_Library@1.0.1
 extra_scripts =
   ${env.extra_scripts}
   variants/nrf52840/diy/nrf52_promicro_diy_tcxo/custom_build_tasks.py ; Add to PIO's Project Tasks pane: preset builds for common displays

variants/nrf52840/heltec_mesh_node_t114/platformio.ini

@@ -13,5 +13,5 @@ build_flags = ${nrf52840_base.build_flags}
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/heltec_mesh_node_t114>
 lib_deps = 
   ${nrf52840_base.lib_deps}
-  lewisxhe/PCF8563_Library@^1.0.1
+  lewisxhe/PCF8563_Library@1.0.1
   https://github.com/meshtastic/st7789/archive/bd33ea58ddfe4a5e4a66d53300ccbd38d66ac21f.zip

variants/nrf52840/heltec_mesh_pocket/platformio.ini

@@ -25,7 +25,7 @@ build_flags = ${nrf52840_base.build_flags}
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/heltec_mesh_pocket> 
 lib_deps = 
   ${nrf52840_base.lib_deps}
-  lewisxhe/PCF8563_Library@^1.0.1
+  lewisxhe/PCF8563_Library@1.0.1
   https://github.com/meshtastic/GxEPD2#b202ebfec6a4821e098cf7a625ba0f6f2400292d
 
 
@@ -71,7 +71,7 @@ build_flags = ${nrf52840_base.build_flags}
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/heltec_mesh_pocket> 
 lib_deps = 
   ${nrf52840_base.lib_deps}
-  lewisxhe/PCF8563_Library@^1.0.1
+  lewisxhe/PCF8563_Library@1.0.1
   https://github.com/meshtastic/GxEPD2#b202ebfec6a4821e098cf7a625ba0f6f2400292d
 
 

variants/nrf52840/heltec_mesh_solar/platformio.ini

@@ -14,7 +14,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/heltec_
 lib_deps = 
   ${nrf52840_base.lib_deps}
   https://github.com/NMIoT/meshsolar/archive/dfc5330dad443982e6cdd37a61d33fc7252f468b.zip
-  lewisxhe/PCF8563_Library@^1.0.1
+  lewisxhe/PCF8563_Library@1.0.1
   ArduinoJson@6.21.4
 [env:heltec-mesh-solar]
 extends = heltec_mesh_solar_base

variants/nrf52840/meshlink/platformio.ini

@@ -14,8 +14,6 @@ build_flags = ${nrf52840_base.build_flags}
   -DRADIOLIB_EXCLUDE_LR11X0=1
   
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/meshlink>
-lib_deps = 
-  ${nrf52840_base.lib_deps}
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ; Note: as of 6/2013 the serial/bootloader based programming takes approximately 30 seconds

variants/nrf52840/meshtiny/platformio.ini

@@ -7,5 +7,3 @@ build_flags = ${nrf52840_base.build_flags} -Ivariants/nrf52840/meshtiny -D MESHT
   -D USE_PIN_BUZZER
   -D MESHTASTIC_EXCLUDE_GPS=1
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/meshtiny>
-lib_deps = 
-  ${nrf52840_base.lib_deps}

variants/nrf52840/nano-g2-ultra/platformio.ini

@@ -10,5 +10,5 @@ build_flags = ${nrf52840_base.build_flags}
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/nano-g2-ultra>
 lib_deps = 
   ${nrf52840_base.lib_deps}
-  lewisxhe/PCF8563_Library@^1.0.1
+  lewisxhe/PCF8563_Library@1.0.1
 ;upload_protocol = fs

variants/nrf52840/nrf52.ini

@@ -2,7 +2,7 @@
 ; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files
 platform =
   # renovate: datasource=custom.pio depName=platformio/nordicnrf52 packageName=platformio/platform/nordicnrf52
-  platformio/nordicnrf52@^10.8.0
+  platformio/nordicnrf52@10.10.0
 extends = arduino_base
 platform_packages =
   ; our custom Git version until they merge our PR
@@ -19,7 +19,6 @@ build_type = release
 build_flags =
   -include variants/nrf52840/cpp_overrides/lfs_util.h
   ${arduino_base.build_flags}
-  -DSERIAL_BUFFER_SIZE=1024
   -Wno-unused-variable
   -Isrc/platform/nrf52
   -DLFS_NO_ASSERT                      ; Disable LFS assertions , see https://github.com/meshtastic/firmware/pull/3818

variants/nrf52840/nrf52832.ini

@@ -1,7 +1,6 @@
 [nrf52832_base]
 extends = nrf52_base
 
-build_flags = ${nrf52_base.build_flags} 
-
-lib_deps =
-  ${nrf52_base.lib_deps}
+build_flags =
+  ${nrf52_base.build_flags}
+  -DSERIAL_BUFFER_SIZE=1024

variants/nrf52840/nrf52840.ini

@@ -1,7 +1,9 @@
 [nrf52840_base]
 extends = nrf52_base
 
-build_flags = ${nrf52_base.build_flags} 
+build_flags =
+   ${nrf52_base.build_flags}
+  -DSERIAL_BUFFER_SIZE=4096
 
 lib_deps =
   ${nrf52_base.lib_deps}

variants/nrf52840/r1-neo/platformio.ini

@@ -14,5 +14,5 @@ lib_deps =
   ${nrf52840_base.lib_deps}
   ${networking_base.lib_deps}
   https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
-  rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
+  rakwireless/RAKwireless NCP5623 RGB LED library@1.0.3
   artronshop/ArtronShop_RX8130CE@1.0.0

variants/nrf52840/rak2560/platformio.ini

@@ -14,7 +14,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak2560
 lib_deps = 
   ${nrf52840_base.lib_deps}
   ${nrf52_networking_base.lib_deps}
-  melopero/Melopero RV3028@^1.1.0
+  melopero/Melopero RV3028@1.2.0
   https://github.com/beegee-tokyo/RAK-OneWireSerial/archive/0.0.2.zip
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)

variants/nrf52840/rak3401_1watt/platformio.ini

@@ -16,9 +16,9 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak3401
 lib_deps = 
   ${nrf52840_base.lib_deps}
   ${networking_base.lib_deps}
-  melopero/Melopero RV3028@^1.1.0
-  rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
-  beegee-tokyo/RAK12035_SoilMoisture@^1.0.4
+  melopero/Melopero RV3028@1.2.0
+  rakwireless/RAKwireless NCP5623 RGB LED library@1.0.3
+  beegee-tokyo/RAK12035_SoilMoisture@1.0.4
   https://github.com/RAKWireless/RAK12034-BMX160/archive/dcead07ffa267d3c906e9ca4a1330ab989e957e2.zip
 
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)

variants/nrf52840/rak4631/platformio.ini

@@ -23,10 +23,10 @@ build_src_filter = ${nrf52_base.build_src_filter} \
 lib_deps = 
   ${nrf52840_base.lib_deps}
   ${nrf52_networking_base.lib_deps}
-  melopero/Melopero RV3028@^1.1.0
+  melopero/Melopero RV3028@1.2.0
   https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
-  rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
-  beegee-tokyo/RAK12035_SoilMoisture@^1.0.4
+  rakwireless/RAKwireless NCP5623 RGB LED library@1.0.3
+  beegee-tokyo/RAK12035_SoilMoisture@1.0.4
   # renovate: datasource=git-refs depName=RAK12034-BMX160 packageName=https://github.com/RAKWireless/RAK12034-BMX160 gitBranch=main
   https://github.com/RAKWireless/RAK12034-BMX160/archive/dcead07ffa267d3c906e9ca4a1330ab989e957e2.zip
 
@@ -42,7 +42,7 @@ extends = env:rak4631
 board_level = extra
 
 ; if the builtin version of openocd has a buggy version of semihosting, so use the external version
-; platform_packages = platformio/tool-openocd@^3.1200.0
+; platform_packages = platformio/tool-openocd@3.1200.0
 
 build_flags =
   ${env:rak4631.build_flags}
@@ -59,6 +59,6 @@ lib_deps =
 ; In theory I could change those scripts.  But for now I'm trying going back to a DAP adapter but with the external openocd.
 
 upload_protocol = stlink
-; eventually use platformio/tool-pyocd@^2.3600.0 instad
+; eventually use platformio/tool-pyocd@2.3600.0 instad
 ;upload_protocol = custom
 ;upload_command = pyocd flash -t nrf52840 $UPLOADERFLAGS $SOURCE

variants/nrf52840/rak4631_epaper/platformio.ini

@@ -14,11 +14,11 @@ build_flags = ${nrf52840_base.build_flags}
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak4631_epaper>
 lib_deps = 
   ${nrf52840_base.lib_deps}
-  zinggjm/GxEPD2@^1.6.2
-  melopero/Melopero RV3028@^1.1.0
-  rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
-  beegee-tokyo/RAKwireless RAK12034@^1.0.0
-  beegee-tokyo/RAK12035_SoilMoisture@^1.0.4
+  zinggjm/GxEPD2@1.6.5
+  melopero/Melopero RV3028@1.2.0
+  rakwireless/RAKwireless NCP5623 RGB LED library@1.0.3
+  beegee-tokyo/RAKwireless RAK12034@1.0.0
+  beegee-tokyo/RAK12035_SoilMoisture@1.0.4
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ;upload_protocol = jlink