Merge branch 'develop' into t-watch-ultra

* Make BLE TX power configurable for nRF52 variants

* Include BLE TX power setting in T114 variant.h as tested

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

bin/device-install.sh

@@ -32,6 +32,19 @@ if ! command -v jq >/dev/null 2>&1; then
     exit 1
 fi
 
+# esptool v5 supports commands with dashes and deprecates commands with
+# underscores. Prior versions only support commands with underscores
+if ${ESPTOOL_CMD} | grep --quiet write-flash
+then
+    ESPTOOL_WRITE_FLASH=write-flash
+    ESPTOOL_ERASE_FLASH=erase-flash
+    ESPTOOL_READ_FLASH_STATUS=read-flash-status
+else
+    ESPTOOL_WRITE_FLASH=write_flash
+    ESPTOOL_ERASE_FLASH=erase_flash
+    ESPTOOL_READ_FLASH_STATUS=read_flash_status
+fi
+
 set -e
 
 # Usage info
@@ -83,8 +96,8 @@ while [ $# -gt 0 ]; do
 done
 
 if [[ $BPS_RESET == true ]]; then
-	$ESPTOOL_CMD --baud $RESET_BAUD --after no_reset read_flash_status
+    $ESPTOOL_CMD --baud $RESET_BAUD --after no_reset ${ESPTOOL_READ_FLASH_STATUS}
-	exit 0
+    exit 0
 fi
 
 [ -z "$FILENAME" ] && [ -n "$1" ] && {
@@ -144,12 +157,12 @@ if [[ -f "$FILENAME" && "$FILENAME" == *.factory.bin ]]; then
     fi
 
     echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
-    $ESPTOOL_CMD erase-flash
+    $ESPTOOL_CMD ${ESPTOOL_ERASE_FLASH}
-    $ESPTOOL_CMD write-flash $FIRMWARE_OFFSET "${FILENAME}"
+    $ESPTOOL_CMD ${ESPTOOL_WRITE_FLASH} $FIRMWARE_OFFSET "${FILENAME}"
     echo "Trying to flash ${OTAFILE} at offset ${OTA_OFFSET}"
-    $ESPTOOL_CMD write_flash $OTA_OFFSET "${OTAFILE}"
+    $ESPTOOL_CMD ${ESPTOOL_WRITE_FLASH} $OTA_OFFSET "${OTAFILE}"
     echo "Trying to flash ${SPIFFSFILE}, at offset ${OFFSET}"
-    $ESPTOOL_CMD write_flash $OFFSET "${SPIFFSFILE}"
+    $ESPTOOL_CMD ${ESPTOOL_WRITE_FLASH} $OFFSET "${SPIFFSFILE}"
 
 else
     show_help

bin/device-update.sh

@@ -20,6 +20,17 @@ else
     exit 1
 fi
 
+# esptool v5 supports commands with dashes and deprecates commands with
+# underscores. Prior versions only support commands with underscores
+if ${ESPTOOL_CMD} | grep --quiet write-flash
+then
+    ESPTOOL_WRITE_FLASH=write-flash
+    ESPTOOL_READ_FLASH_STATUS=read-flash-status
+else
+    ESPTOOL_WRITE_FLASH=write_flash
+    ESPTOOL_READ_FLASH_STATUS=read_flash_status
+fi
+
 # Usage info
 show_help() {
 cat << EOF
@@ -69,7 +80,7 @@ done
 shift "$((OPTIND-1))"
 
 if [ "$CHANGE_MODE" = true ]; then
-	$ESPTOOL_CMD --baud $RESET_BAUD --after no_reset read_flash_status
+    $ESPTOOL_CMD --baud $RESET_BAUD --after no_reset ${ESPTOOL_READ_FLASH_STATUS}
     exit 0
 fi
 
@@ -80,7 +91,7 @@ fi
 
 if [[ -f "$FILENAME" && "$FILENAME" != *.factory.bin ]]; then
     echo "Trying to flash update ${FILENAME}"
-    $ESPTOOL_CMD --baud $FLASH_BAUD write-flash $UPDATE_OFFSET "${FILENAME}"
+    $ESPTOOL_CMD --baud $FLASH_BAUD ${ESPTOOL_WRITE_FLASH} $UPDATE_OFFSET "${FILENAME}"
 else
     show_help
     echo "Invalid file: ${FILENAME}"

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,6 +87,9 @@
   </screenshots>
 
   <releases>
+    <release version="2.7.19" date="2026-01-22">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.19</url>
+    </release>
     <release version="2.7.18" date="2026-01-02">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.18</url>
     </release>

boards/t-watch-ultra.json

@@ -0,0 +1,40 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_qspi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "psram_type": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "t-watch-ultra"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino"],
+  "name": "LilyGo T-Watch Ultra",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "require_upload_port": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.lilygo.cc/en-pl/products/t-watch-ultra",
+  "vendor": "LilyGo"
+}

debian/changelog

@@ -1,3 +1,9 @@
+meshtasticd (2.7.19.0) unstable; urgency=medium
+
+  * Version 2.7.19
+
+ -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Thu, 22 Jan 2026 22:17:40 +0000
+
 meshtasticd (2.7.18.0) unstable; urgency=medium
 
   * Version 2.7.18

monitor/filter_c3_exception_decoder.py

@@ -43,13 +43,11 @@ class Esp32C3ExceptionDecoder(DeviceMonitorFilterBase):
         self.enabled = self.setup_paths()
 
         if self.config.get("env:" + self.environment, "build_type") != "debug":
-            print(
+            print("""
-                """
 Please build project in debug configuration to get more details about an exception.
 See https://docs.platformio.org/page/projectconf/build_configurations.html
 
-"""
+""")
-            )
 
         return self
 

src/Power.cpp

@@ -1172,6 +1172,48 @@ bool Power::axpChipInit()
             PMU->disablePowerOutput(XPOWERS_DLDO1); // Invalid power channel, it does not exist
             PMU->disablePowerOutput(XPOWERS_DLDO2); // Invalid power channel, it does not exist
             PMU->disablePowerOutput(XPOWERS_VBACKUP);
+        } else if (HW_VENDOR == meshtastic_HardwareModel_T_WATCH_ULTRA) {
+            PMU->clearIrqStatus();
+
+            // Turn off the PMU charging indicator light, no physical connection
+            PMU->setChargingLedMode(XPOWERS_CHG_LED_OFF); // NO LED
+
+            PMU->setPowerChannelVoltage(XPOWERS_ALDO1, 3300); // SD Card
+            PMU->enablePowerOutput(XPOWERS_ALDO1);
+
+            PMU->setPowerChannelVoltage(XPOWERS_ALDO2, 3300); // Display
+            PMU->enablePowerOutput(XPOWERS_ALDO2);
+
+            PMU->setPowerChannelVoltage(XPOWERS_ALDO3, 3300); // LoRa
+            PMU->enablePowerOutput(XPOWERS_ALDO3);
+
+            PMU->setPowerChannelVoltage(XPOWERS_ALDO4, 1800); // Sensor
+            PMU->enablePowerOutput(XPOWERS_ALDO4);
+
+            PMU->setPowerChannelVoltage(XPOWERS_BLDO1, 3300); // GPS
+            PMU->enablePowerOutput(XPOWERS_BLDO1);
+
+            PMU->setPowerChannelVoltage(XPOWERS_BLDO2, 3300); // Speaker
+            PMU->enablePowerOutput(XPOWERS_BLDO2);
+
+            PMU->setPowerChannelVoltage(XPOWERS_VBACKUP, 3300); // RTC Button battery
+            PMU->enablePowerOutput(XPOWERS_VBACKUP);
+
+            // PMU->enablePowerOutput(XPOWERS_DLDO1); // NFC
+
+            // UNUSED POWER CHANNEL
+            PMU->disablePowerOutput(XPOWERS_DCDC2);
+            PMU->disablePowerOutput(XPOWERS_DCDC3);
+            PMU->disablePowerOutput(XPOWERS_DCDC4);
+            PMU->disablePowerOutput(XPOWERS_DCDC5);
+            PMU->disablePowerOutput(XPOWERS_CPULDO);
+
+            // Enable Measure
+            PMU->enableBattDetection();
+            PMU->enableVbusVoltageMeasure();
+            PMU->enableBattVoltageMeasure();
+            PMU->enableSystemVoltageMeasure();
+            PMU->enableTemperatureMeasure();
         }
 
         // disable all axp chip interrupt

src/configuration.h

@@ -155,6 +155,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #endif
 
 // Default system gain to 0 if not defined
+#ifndef NUM_PA_POINTS
+#define NUM_PA_POINTS 1
+#endif
+
 #ifndef TX_GAIN_LORA
 #define TX_GAIN_LORA 0
 #endif

src/gps/GPS.cpp

@@ -933,8 +933,8 @@ void GPS::setPowerPMU(bool on)
         } else if (HW_VENDOR == meshtastic_HardwareModel_LILYGO_TBEAM_S3_CORE) {
             // t-beam-s3-core GNSS power channel
             on ? PMU->enablePowerOutput(XPOWERS_ALDO4) : PMU->disablePowerOutput(XPOWERS_ALDO4);
-        } else if (HW_VENDOR == meshtastic_HardwareModel_T_WATCH_S3) {
+        } else if (HW_VENDOR == meshtastic_HardwareModel_T_WATCH_ULTRA || HW_VENDOR == meshtastic_HardwareModel_T_WATCH_S3) {
-            // t-watch-s3-plus GNSS power channel
+            // t-watch-ultra / t-watch-s3-plus GNSS power channel
             on ? PMU->enablePowerOutput(XPOWERS_BLDO1) : PMU->disablePowerOutput(XPOWERS_BLDO1);
         }
     } else if (model == XPOWERS_AXP192) {

src/graphics/Screen.cpp

@@ -361,7 +361,8 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
         LOG_INFO("SSD1306 init success");
     }
 #elif defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7789_CS) ||    \
-    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(HACKADAY_COMMUNICATOR)
+    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(CO5300_CS) ||                \
+    defined(HACKADAY_COMMUNICATOR)
     dispdev = new TFTDisplay(address.address, -1, -1, geometry,
                              (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
 #elif defined(USE_EINK) && !defined(USE_EINK_DYNAMICDISPLAY)
@@ -429,7 +430,7 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
         if (on) {
             LOG_INFO("Turn on screen");
             powerMon->setState(meshtastic_PowerMon_State_Screen_On);
-#ifdef T_WATCH_S3
+#if defined(T_WATCH_S3) || defined(T_WATCH_ULTRA)
             PMU->enablePowerOutput(XPOWERS_ALDO2);
 #endif
 
@@ -535,7 +536,7 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
 #endif
 #endif
 
-#ifdef T_WATCH_S3
+#if defined(T_WATCH_S3) || defined(T_WATCH_ULTRA)
             PMU->disablePowerOutput(XPOWERS_ALDO2);
 #endif
             enabled = false;
@@ -642,7 +643,8 @@ void Screen::setup()
 #else
     if (!config.display.flip_screen) {
 #if defined(ST7701_CS) || defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7789_CS) ||      \
-    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(HACKADAY_COMMUNICATOR)
+    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(CO5300_CS) ||                \
+    defined(HACKADAY_COMMUNICATOR)
         static_cast<TFTDisplay *>(dispdev)->flipScreenVertically();
 #elif defined(USE_ST7789)
         static_cast<ST7789Spi *>(dispdev)->flipScreenVertically();

src/graphics/ScreenFonts.h

@@ -90,7 +90,7 @@
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
      defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) ||             \
-     defined(HACKADAY_COMMUNICATOR) || defined(USE_ST7796)) &&                                                                   \
+     defined(CO5300_CS) || defined(HACKADAY_COMMUNICATOR) || defined(USE_ST7796)) &&                                             \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 // The screen is bigger so use bigger fonts
 #define FONT_SMALL FONT_MEDIUM_LOCAL // Height: 19

src/graphics/TFTDisplay.cpp

@@ -22,6 +22,109 @@ uint16_t TFT_MESH = TFT_MESH_OVERRIDE;
 uint16_t TFT_MESH = COLOR565(0x67, 0xEA, 0x94);
 #endif
 
+#if defined(CO5300_CS)
+#include <LovyanGFX.hpp> // Graphics and font library for AMOLED driver chip
+class LGFX : public lgfx::LGFX_Device
+{
+    lgfx::Panel_CO5300 _panel_instance;
+    lgfx::Bus_SPI _bus_instance;
+
+  public:
+    LGFX(void)
+    {
+        {
+            auto cfg = _bus_instance.config();
+
+            // configure SPI
+            cfg.spi_host = CO5300_SPI_HOST; // ESP32-S2,S3,C3 : SPI2_HOST or SPI3_HOST / ESP32 : VSPI_HOST or HSPI_HOST
+            cfg.spi_mode = SPI_MODE0;
+            cfg.freq_write = SPI_FREQUENCY; // SPI clock for transmission (up to 80MHz, rounded to the value obtained by dividing
+                                            // 80MHz by an integer)
+            cfg.freq_read = SPI_READ_FREQUENCY; // SPI clock when receiving
+            cfg.spi_3wire = false;              // Set to true if reception is done on the MOSI pin
+            cfg.use_lock = true;                // Set to true to use transaction locking
+            cfg.dma_channel = SPI_DMA_CH_AUTO;  // SPI_DMA_CH_AUTO; // Set DMA channel to use (0=not use DMA / 1=1ch / 2=ch /
+                                                // SPI_DMA_CH_AUTO=auto setting)
+            cfg.pin_sclk = CO5300_SCK;          // Set SPI SCLK pin number
+            cfg.pin_io0 = CO5300_IO0;
+            cfg.pin_io1 = CO5300_IO1;
+            cfg.pin_io2 = CO5300_IO2;
+            cfg.pin_io3 = CO5300_IO3;
+
+            _bus_instance.config(cfg);              // applies the set value to the bus.
+            _panel_instance.setBus(&_bus_instance); // set the bus on the panel.
+        }
+
+        {                                        // Set the display panel control.
+            auto cfg = _panel_instance.config(); // Gets a structure for display panel settings.
+
+            cfg.pin_cs = CO5300_CS;                    // Pin number where CS is connected (-1 = disable)
+            cfg.pin_rst = CO5300_RESET;                // Pin number where RST is connected  (-1 = disable)
+            cfg.panel_width = TFT_WIDTH;               // actual displayable width
+            cfg.panel_height = TFT_HEIGHT;             // actual displayable height
+            cfg.offset_rotation = TFT_OFFSET_ROTATION; // Rotation direction value offset 0~7 (4~7 is upside down)
+            cfg.offset_x = TFT_OFFSET_X;
+            cfg.offset_y = TFT_OFFSET_Y;
+            cfg.dummy_read_pixel = 8; // Number of bits for dummy read before pixel readout
+            cfg.dummy_read_bits = 1;  // Number of bits for dummy read before non-pixel data read
+            cfg.readable = true;      // Set to true if data can be read
+            cfg.invert = false;       // Set to true if the light/darkness of the panel is reversed
+            cfg.rgb_order = false;    // Set to true if the panel's red and blue are swapped
+            cfg.dlen_16bit = false;   // Set to true for panels that transmit data length in 16-bit units
+            cfg.bus_shared = true;    // If the bus is shared with the SD card, set to true (bus control with drawJpgFile etc.)
+
+            // Set the following only when the display is shifted with a driver with a variable number of pixels
+            cfg.memory_width = TFT_WIDTH;   // Maximum width supported by the driver IC
+            cfg.memory_height = TFT_HEIGHT; // Maximum height supported by the driver IC
+            _panel_instance.config(cfg);
+        }
+
+        setPanel(&_panel_instance);
+    }
+
+    bool enableFrameBuffer(bool auto_display = false)
+    {
+        if (_panel_instance.initPanelFb()) {
+            auto fbPanel = _panel_instance.getPanelFb();
+            if (fbPanel) {
+                fbPanel->setBus(&_bus_instance);
+                fbPanel->setAutoDisplay(auto_display);
+                setPanel(fbPanel);
+                return true;
+            }
+        }
+        return false;
+    }
+
+    void disableFrameBuffer()
+    {
+        auto fbPanel = _panel_instance.getPanelFb();
+        if (fbPanel) {
+            _panel_instance.deinitPanelFb();
+            setPanel(&_panel_instance);
+        }
+    }
+
+    bool init()
+    {
+#ifdef CO5300_RESET
+        LOG_DEBUG("LGFX_Panel_CO5300::init()");
+        lgfx::pinMode(CO5300_RESET, lgfx::pin_mode_t::output);
+        lgfx::gpio_hi(CO5300_RESET);
+        delay(200);
+        lgfx::gpio_lo(CO5300_RESET);
+        delay(300);
+        lgfx::gpio_hi(CO5300_RESET);
+        delay(200);
+#endif
+        return lgfx::LGFX_Device::init() && enableFrameBuffer(false);
+    }
+};
+
+static LGFX *tft = nullptr;
+
+#endif
+
 #if defined(ST7735S)
 #include <LovyanGFX.hpp> // Graphics and font library for ST7735 driver chip
 
@@ -1340,7 +1443,7 @@ void TFTDisplay::sendCommand(uint8_t com)
     // handle display on/off directly
     switch (com) {
     case DISPLAYON: {
-        // LOG_DEBUG("Display on");
+        LOG_DEBUG("Display on");
         backlightEnable->set(true);
 #if ARCH_PORTDUINO
         display(true);
@@ -1360,14 +1463,13 @@ void TFTDisplay::sendCommand(uint8_t com)
         unphone.backlight(true); // using unPhone library
 #endif
 #ifdef RAK14014
-#elif !defined(M5STACK) && !defined(ST7789_CS) &&                                                                                \
+#elif !defined(M5STACK) && !defined(ST7789_CS) && !defined(HACKADAY_COMMUNICATOR)
-    !defined(HACKADAY_COMMUNICATOR) // T-Deck gets brightness set in Screen.cpp in the handleSetOn function
         tft->setBrightness(172);
 #endif
         break;
     }
     case DISPLAYOFF: {
-        // LOG_DEBUG("Display off");
+        LOG_DEBUG("Display off");
         backlightEnable->set(false);
 #if ARCH_PORTDUINO
         tft->clear();
@@ -1469,8 +1571,8 @@ bool TFTDisplay::connect()
     tft = new LGFX;
 #endif
 
-    backlightEnable->set(true);
     LOG_INFO("Power to TFT Backlight");
+    backlightEnable->set(true);
 
 #ifdef UNPHONE
     unphone.backlight(true); // using unPhone library
@@ -1498,7 +1600,7 @@ bool TFTDisplay::connect()
     tft->setRotation(1); // T-Deck has the TFT in landscape
 #elif defined(T_WATCH_S3)
     tft->setRotation(2); // T-Watch S3 left-handed orientation
-#elif ARCH_PORTDUINO || defined(SENSECAP_INDICATOR) || defined(T_LORA_PAGER)
+#elif ARCH_PORTDUINO || defined(SENSECAP_INDICATOR) || defined(T_LORA_PAGER) || defined(T_WATCH_ULTRA)
     tft->setRotation(0); // use config.yaml to set rotation
 #else
     tft->setRotation(3); // Orient horizontal and wide underneath the silkscreen name label

src/graphics/draw/DebugRenderer.cpp

@@ -97,7 +97,7 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
                                           (storeForwardModule->heartbeatInterval * 1200))) { // no heartbeat, overlap a bit
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
      defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) ||             \
-     defined(HACKADAY_COMMUNICATOR) || defined(USE_ST7796) || ARCH_PORTDUINO) &&                                                 \
+     defined(CO5300_CS) || defined(HACKADAY_COMMUNICATOR) || defined(USE_ST7796) || ARCH_PORTDUINO) &&                           \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
             display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 12,
                                    8, imgQuestionL1);
@@ -110,7 +110,7 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
         } else {
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
      defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) ||             \
-     defined(HACKADAY_COMMUNICATOR) || defined(USE_ST7796)) &&                                                                   \
+     defined(CO5300_CS) || defined(HACKADAY_COMMUNICATOR) || defined(USE_ST7796)) &&                                             \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
             display->drawFastImage(x + SCREEN_WIDTH - 18 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 16,
                                    8, imgSFL1);
@@ -126,7 +126,7 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
         // TODO: Raspberry Pi supports more than just the one screen size
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
      defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) ||             \
-     defined(HACKADAY_COMMUNICATOR) || defined(USE_ST7796) || ARCH_PORTDUINO) &&                                                 \
+     defined(CO5300_CS) || defined(HACKADAY_COMMUNICATOR) || defined(USE_ST7796) || ARCH_PORTDUINO) &&                           \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
         display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8,
                                imgInfoL1);

src/graphics/draw/MessageRenderer.cpp

@@ -6,7 +6,6 @@
 #include "MessageStore.h"
 #include "NodeDB.h"
 #include "UIRenderer.h"
-#include "configuration.h"
 #include "gps/RTC.h"
 #include "graphics/Screen.h"
 #include "graphics/ScreenFonts.h"
@@ -20,7 +19,6 @@
 
 // External declarations
 extern bool hasUnreadMessage;
-extern meshtastic_DeviceState devicestate;
 extern graphics::Screen *screen;
 
 using graphics::Emote;
@@ -49,7 +47,7 @@ static inline size_t utf8CharLen(uint8_t c)
 }
 
 // Remove variation selectors (FE0F) and skin tone modifiers from emoji so they match your labels
-std::string normalizeEmoji(const std::string &s)
+static std::string normalizeEmoji(const std::string &s)
 {
     std::string out;
     for (size_t i = 0; i < s.size();) {
@@ -82,6 +80,7 @@ uint32_t pauseStart = 0;
 bool waitingToReset = false;
 bool scrollStarted = false;
 static bool didReset = false;
+static constexpr int MESSAGE_BLOCK_GAP = 6;
 
 void scrollUp()
 {
@@ -111,22 +110,6 @@ void scrollDown()
 
 void drawStringWithEmotes(OLEDDisplay *display, int x, int y, const std::string &line, const Emote *emotes, int emoteCount)
 {
-    std::string renderLine;
-    for (size_t i = 0; i < line.size();) {
-        uint8_t c = (uint8_t)line[i];
-        size_t len = utf8CharLen(c);
-        if (c == 0xEF && i + 2 < line.size() && (uint8_t)line[i + 1] == 0xB8 && (uint8_t)line[i + 2] == 0x8F) {
-            i += 3;
-            continue;
-        }
-        if (c == 0xF0 && i + 3 < line.size() && (uint8_t)line[i + 1] == 0x9F && (uint8_t)line[i + 2] == 0x8F &&
-            ((uint8_t)line[i + 3] >= 0xBB && (uint8_t)line[i + 3] <= 0xBF)) {
-            i += 4;
-            continue;
-        }
-        renderLine.append(line, i, len);
-        i += len;
-    }
     int cursorX = x;
     const int fontHeight = FONT_HEIGHT_SMALL;
 
@@ -203,8 +186,7 @@ void drawStringWithEmotes(OLEDDisplay *display, int x, int y, const std::string
 
         // Render the emote (if found)
         if (matchedEmote && i == nextEmotePos) {
-            // Vertically center emote relative to font baseline (not just midline)
+            int iconY = y + (lineHeight - matchedEmote->height) / 2;
-            int iconY = fontY + (fontHeight - matchedEmote->height) / 2;
             display->drawXbm(cursorX, iconY, matchedEmote->width, matchedEmote->height, matchedEmote->bitmap);
             cursorX += matchedEmote->width + 1;
             i += emojiLen;
@@ -423,6 +405,102 @@ static inline int getRenderedLineWidth(OLEDDisplay *display, const std::string &
     return totalWidth;
 }
 
+struct MessageBlock {
+    size_t start;
+    size_t end;
+    bool mine;
+};
+
+static int getDrawnLinePixelBottom(int lineTopY, const std::string &line, bool isHeaderLine)
+{
+    if (isHeaderLine) {
+        return lineTopY + (FONT_HEIGHT_SMALL - 1);
+    }
+
+    int tallest = FONT_HEIGHT_SMALL;
+    for (int e = 0; e < numEmotes; ++e) {
+        if (line.find(emotes[e].label) != std::string::npos) {
+            if (emotes[e].height > tallest)
+                tallest = emotes[e].height;
+        }
+    }
+
+    const int lineHeight = std::max(FONT_HEIGHT_SMALL, tallest);
+    const int iconTop = lineTopY + (lineHeight - tallest) / 2;
+
+    return iconTop + tallest - 1;
+}
+
+static void drawRoundedRectOutline(OLEDDisplay *display, int x, int y, int w, int h, int r)
+{
+    if (w <= 1 || h <= 1)
+        return;
+
+    if (r < 0)
+        r = 0;
+
+    int maxR = (std::min(w, h) / 2) - 1;
+    if (r > maxR)
+        r = maxR;
+
+    if (r == 0) {
+        display->drawRect(x, y, w, h);
+        return;
+    }
+
+    const int x0 = x;
+    const int y0 = y;
+    const int x1 = x + w - 1;
+    const int y1 = y + h - 1;
+
+    // sides
+    if (x0 + r <= x1 - r) {
+        display->drawLine(x0 + r, y0, x1 - r, y0); // top
+        display->drawLine(x0 + r, y1, x1 - r, y1); // bottom
+    }
+    if (y0 + r <= y1 - r) {
+        display->drawLine(x0, y0 + r, x0, y1 - r); // left
+        display->drawLine(x1, y0 + r, x1, y1 - r); // right
+    }
+
+    // corner arcs
+    display->drawCircleQuads(x0 + r, y0 + r, r, 2); // top left
+    display->drawCircleQuads(x1 - r, y0 + r, r, 1); // top right
+    display->drawCircleQuads(x1 - r, y1 - r, r, 8); // bottom right
+    display->drawCircleQuads(x0 + r, y1 - r, r, 4); // bottom left
+}
+
+static std::vector<MessageBlock> buildMessageBlocks(const std::vector<bool> &isHeaderVec, const std::vector<bool> &isMineVec)
+{
+    std::vector<MessageBlock> blocks;
+    if (isHeaderVec.empty())
+        return blocks;
+
+    size_t start = 0;
+    bool mine = isMineVec[0];
+
+    for (size_t i = 1; i < isHeaderVec.size(); ++i) {
+        if (isHeaderVec[i]) {
+            MessageBlock b;
+            b.start = start;
+            b.end = i - 1;
+            b.mine = mine;
+            blocks.push_back(b);
+
+            start = i;
+            mine = isMineVec[i];
+        }
+    }
+
+    MessageBlock last;
+    last.start = start;
+    last.end = isHeaderVec.size() - 1;
+    last.mine = mine;
+    blocks.push_back(last);
+
+    return blocks;
+}
+
 static void drawMessageScrollbar(OLEDDisplay *display, int visibleHeight, int totalHeight, int scrollOffset, int startY)
 {
     if (totalHeight <= visibleHeight)
@@ -482,9 +560,14 @@ void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
     constexpr int LEFT_MARGIN = 2;
     constexpr int RIGHT_MARGIN = 2;
     constexpr int SCROLLBAR_WIDTH = 3;
+    constexpr int BUBBLE_PAD_X = 3;
+    constexpr int BUBBLE_PAD_Y = 4;
+    constexpr int BUBBLE_RADIUS = 4;
+    constexpr int BUBBLE_MIN_W = 24;
+    constexpr int BUBBLE_TEXT_INDENT = 2;
 
-    const int leftTextWidth = SCREEN_WIDTH - LEFT_MARGIN - RIGHT_MARGIN;
+    // Derived widths
-
+    const int leftTextWidth = SCREEN_WIDTH - LEFT_MARGIN - RIGHT_MARGIN - (BUBBLE_PAD_X * 2);
     const int rightTextWidth = SCREEN_WIDTH - LEFT_MARGIN - RIGHT_MARGIN - SCROLLBAR_WIDTH;
 
     // Title string depending on mode
@@ -547,7 +630,28 @@ void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
         char chanType[32] = "";
         if (currentMode == ThreadMode::ALL) {
             if (m.dest == NODENUM_BROADCAST) {
-                snprintf(chanType, sizeof(chanType), "#%s", channels.getName(m.channelIndex));
+                const char *name = channels.getName(m.channelIndex);
+                if (currentResolution == ScreenResolution::Low || currentResolution == ScreenResolution::UltraLow) {
+                    if (strcmp(name, "ShortTurbo") == 0)
+                        name = "ShortT";
+                    else if (strcmp(name, "ShortSlow") == 0)
+                        name = "ShortS";
+                    else if (strcmp(name, "ShortFast") == 0)
+                        name = "ShortF";
+                    else if (strcmp(name, "MediumSlow") == 0)
+                        name = "MedS";
+                    else if (strcmp(name, "MediumFast") == 0)
+                        name = "MedF";
+                    else if (strcmp(name, "LongSlow") == 0)
+                        name = "LongS";
+                    else if (strcmp(name, "LongFast") == 0)
+                        name = "LongF";
+                    else if (strcmp(name, "LongTurbo") == 0)
+                        name = "LongT";
+                    else if (strcmp(name, "LongMod") == 0)
+                        name = "LongM";
+                }
+                snprintf(chanType, sizeof(chanType), "#%s", name);
             } else {
                 snprintf(chanType, sizeof(chanType), "(DM)");
             }
@@ -614,8 +718,8 @@ void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
         }
 
         // Shrink Sender name if needed
-        int availWidth = SCREEN_WIDTH - display->getStringWidth(timeBuf) - display->getStringWidth(chanType) -
+        int availWidth = (mine ? rightTextWidth : leftTextWidth) - display->getStringWidth(timeBuf) -
-                         display->getStringWidth(" @...") - 10;
+                         display->getStringWidth(chanType) - display->getStringWidth("   @...");
         if (availWidth < 0)
             availWidth = 0;
 
@@ -667,6 +771,8 @@ void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
     cachedLines = allLines;
     cachedHeights = calculateLineHeights(cachedLines, emotes, isHeader);
 
+    std::vector<MessageBlock> blocks = buildMessageBlocks(isHeader, isMine);
+
     // Scrolling logic (unchanged)
     int totalHeight = 0;
     for (size_t i = 0; i < cachedHeights.size(); ++i)
@@ -714,12 +820,123 @@ void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
 
     int finalScroll = (int)scrollY;
     int yOffset = -finalScroll + getTextPositions(display)[1];
+    const int contentTop = getTextPositions(display)[1];
+    const int contentBottom = scrollBottom; // already excludes nav line
+    const int rightEdge = SCREEN_WIDTH - SCROLLBAR_WIDTH - RIGHT_MARGIN;
+    const int bubbleGapY = std::max(1, MESSAGE_BLOCK_GAP / 2);
+
+    std::vector<int> lineTop;
+    lineTop.resize(cachedLines.size());
+    {
+        int acc = 0;
+        for (size_t i = 0; i < cachedLines.size(); ++i) {
+            lineTop[i] = yOffset + acc;
+            acc += cachedHeights[i];
+        }
+    }
+
+    // Draw bubbles
+    for (size_t bi = 0; bi < blocks.size(); ++bi) {
+        const auto &b = blocks[bi];
+        if (b.start >= cachedLines.size() || b.end >= cachedLines.size() || b.start > b.end)
+            continue;
+
+        int visualTop = lineTop[b.start];
+
+        int topY;
+        if (isHeader[b.start]) {
+            // Header start
+            constexpr int BUBBLE_PAD_TOP_HEADER = 1; // try 1 or 2
+            topY = visualTop - BUBBLE_PAD_TOP_HEADER;
+        } else {
+            // Body start
+            bool thisLineHasEmote = false;
+            for (int e = 0; e < numEmotes; ++e) {
+                if (cachedLines[b.start].find(emotes[e].label) != std::string::npos) {
+                    thisLineHasEmote = true;
+                    break;
+                }
+            }
+            if (thisLineHasEmote) {
+                constexpr int EMOTE_PADDING_ABOVE = 4;
+                visualTop -= EMOTE_PADDING_ABOVE;
+            }
+            topY = visualTop - BUBBLE_PAD_Y;
+        }
+        int visualBottom = getDrawnLinePixelBottom(lineTop[b.end], cachedLines[b.end], isHeader[b.end]);
+        int bottomY = visualBottom + BUBBLE_PAD_Y;
+
+        if (bi + 1 < blocks.size()) {
+            int nextHeaderIndex = (int)blocks[bi + 1].start;
+            int nextTop = lineTop[nextHeaderIndex];
+            int maxBottom = nextTop - 1 - bubbleGapY;
+            if (bottomY > maxBottom)
+                bottomY = maxBottom;
+        }
+
+        if (bottomY <= topY + 2)
+            continue;
+
+        if (bottomY < contentTop || topY > contentBottom - 1)
+            continue;
+
+        int maxLineW = 0;
+
+        for (size_t i = b.start; i <= b.end; ++i) {
+            int w = 0;
+            if (isHeader[i]) {
+                w = display->getStringWidth(cachedLines[i].c_str());
+                if (b.mine)
+                    w += 12; // room for ACK/NACK/relay mark
+            } else {
+                w = getRenderedLineWidth(display, cachedLines[i], emotes, numEmotes);
+            }
+            if (w > maxLineW)
+                maxLineW = w;
+        }
+
+        int bubbleW = std::max(BUBBLE_MIN_W, maxLineW + (BUBBLE_PAD_X * 2));
+        int bubbleH = (bottomY - topY) + 1;
+        int bubbleX = 0;
+        if (b.mine) {
+            bubbleX = rightEdge - bubbleW;
+        } else {
+            bubbleX = x;
+        }
+        if (bubbleX < x)
+            bubbleX = x;
+        if (bubbleX + bubbleW > rightEdge)
+            bubbleW = std::max(1, rightEdge - bubbleX);
+
+        if (bubbleW > 1 && bubbleH > 1) {
+            int r = BUBBLE_RADIUS;
+            int maxR = (std::min(bubbleW, bubbleH) / 2) - 1;
+            if (maxR < 0)
+                maxR = 0;
+            if (r > maxR)
+                r = maxR;
+
+            drawRoundedRectOutline(display, bubbleX, topY, bubbleW, bubbleH, r);
+            const int extra = 3;
+            const int rr = r + extra;
+            int x1 = bubbleX + bubbleW - 1;
+            int y1 = topY + bubbleH - 1;
+
+            if (!b.mine) {
+                // top-left corner square
+                display->drawLine(bubbleX, topY, bubbleX + rr, topY);
+                display->drawLine(bubbleX, topY, bubbleX, topY + rr);
+            } else {
+                // bottom-right corner square
+                display->drawLine(x1 - rr, y1, x1, y1);
+                display->drawLine(x1, y1 - rr, x1, y1);
+            }
+        }
+    }
 
     // Render visible lines
+    int lineY = yOffset;
     for (size_t i = 0; i < cachedLines.size(); ++i) {
-        int lineY = yOffset;
-        for (size_t j = 0; j < i; ++j)
-            lineY += cachedHeights[j];
 
         if (lineY > -cachedHeights[i] && lineY < scrollBottom) {
             if (isHeader[i]) {
@@ -728,14 +945,28 @@ void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
                 int headerX;
                 if (isMine[i]) {
                     // push header left to avoid overlap with scrollbar
-                    headerX = SCREEN_WIDTH - w - SCROLLBAR_WIDTH - RIGHT_MARGIN;
+                    headerX = (SCREEN_WIDTH - SCROLLBAR_WIDTH - RIGHT_MARGIN) - w - BUBBLE_TEXT_INDENT;
                     if (headerX < LEFT_MARGIN)
                         headerX = LEFT_MARGIN;
                 } else {
-                    headerX = x;
+                    headerX = x + BUBBLE_PAD_X + BUBBLE_TEXT_INDENT;
                 }
                 display->drawString(headerX, lineY, cachedLines[i].c_str());
 
+                // Draw underline just under header text
+                int underlineY = lineY + FONT_HEIGHT_SMALL;
+
+                int underlineW = w;
+                int maxW = rightEdge - headerX;
+                if (maxW < 0)
+                    maxW = 0;
+                if (underlineW > maxW)
+                    underlineW = maxW;
+
+                for (int px = 0; px < underlineW; ++px) {
+                    display->setPixel(headerX + px, underlineY);
+                }
+
                 // Draw ACK/NACK mark for our own messages
                 if (isMine[i]) {
                     int markX = headerX - 10;
@@ -753,32 +984,28 @@ void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
                     // AckStatus::NONE → show nothing
                 }
 
-                // Draw underline just under header text
-                int underlineY = lineY + FONT_HEIGHT_SMALL;
-                for (int px = 0; px < w; ++px) {
-                    display->setPixel(headerX + px, underlineY);
-                }
             } else {
                 // Render message line
                 if (isMine[i]) {
                     // Calculate actual rendered width including emotes
                     int renderedWidth = getRenderedLineWidth(display, cachedLines[i], emotes, numEmotes);
-                    int rightX = SCREEN_WIDTH - renderedWidth - SCROLLBAR_WIDTH - RIGHT_MARGIN;
+                    int rightX = (SCREEN_WIDTH - SCROLLBAR_WIDTH - RIGHT_MARGIN) - renderedWidth - BUBBLE_TEXT_INDENT;
                     if (rightX < LEFT_MARGIN)
                         rightX = LEFT_MARGIN;
 
                     drawStringWithEmotes(display, rightX, lineY, cachedLines[i], emotes, numEmotes);
                 } else {
-                    drawStringWithEmotes(display, x, lineY, cachedLines[i], emotes, numEmotes);
+                    drawStringWithEmotes(display, x + BUBBLE_PAD_X + BUBBLE_TEXT_INDENT, lineY, cachedLines[i], emotes,
+                                         numEmotes);
                 }
             }
         }
+
+        lineY += cachedHeights[i];
     }
-    int totalContentHeight = totalHeight;
-    int visibleHeight = usableHeight;
 
     // Draw scrollbar
-    drawMessageScrollbar(display, visibleHeight, totalContentHeight, finalScroll, getTextPositions(display)[1]);
+    drawMessageScrollbar(display, usableHeight, totalHeight, finalScroll, getTextPositions(display)[1]);
     graphics::drawCommonHeader(display, x, y, titleStr);
     graphics::drawCommonFooter(display, x, y);
 }
@@ -841,7 +1068,6 @@ std::vector<int> calculateLineHeights(const std::vector<std::string> &lines, con
     constexpr int HEADER_UNDERLINE_GAP = 0; // space between underline and first body line
     constexpr int HEADER_UNDERLINE_PIX = 1; // underline thickness (1px row drawn)
     constexpr int BODY_LINE_LEADING = -4;   // default vertical leading for normal body lines
-    constexpr int MESSAGE_BLOCK_GAP = 4;    // gap after a message block before a new header
     constexpr int EMOTE_PADDING_ABOVE = 4;  // space above emote line (added to line above)
     constexpr int EMOTE_PADDING_BELOW = 3;  // space below emote line (added to emote line)
 
@@ -851,6 +1077,7 @@ std::vector<int> calculateLineHeights(const std::vector<std::string> &lines, con
     for (size_t idx = 0; idx < lines.size(); ++idx) {
         const auto &line = lines[idx];
         const int baseHeight = FONT_HEIGHT_SMALL;
+        int lineHeight = baseHeight;
 
         // Detect if THIS line or NEXT line contains an emote
         bool hasEmote = false;
@@ -872,8 +1099,6 @@ std::vector<int> calculateLineHeights(const std::vector<std::string> &lines, con
             }
         }
 
-        int lineHeight = baseHeight;
-
         if (isHeaderVec[idx]) {
             // Header line spacing
             lineHeight = baseHeight + HEADER_UNDERLINE_PIX + HEADER_UNDERLINE_GAP;
@@ -922,7 +1147,7 @@ void handleNewMessage(OLEDDisplay *display, const StoredMessage &sm, const mesht
 
         // Banner logic
         const meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(packet.from);
-        char longName[48] = "???";
+        char longName[48] = "?";
         if (node && node->user.long_name) {
             strncpy(longName, node->user.long_name, sizeof(longName) - 1);
             longName[sizeof(longName) - 1] = '\0';

src/graphics/draw/UIRenderer.cpp

@@ -265,7 +265,7 @@ void UIRenderer::drawNodes(OLEDDisplay *display, int16_t x, int16_t y, const mes
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
      defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) ||             \
-     defined(HACKADAY_COMMUNICATOR) || defined(USE_ST7796)) &&                                                                   \
+     defined(CO5300_CS) || defined(HACKADAY_COMMUNICATOR) || defined(USE_ST7796)) &&                                             \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 
     if (currentResolution == ScreenResolution::High) {

src/graphics/images.h

@@ -28,7 +28,7 @@ const uint8_t bluetoothConnectedIcon[36] PROGMEM = {0xfe, 0x01, 0xff, 0x03, 0x03
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
      defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) ||             \
-     defined(USE_ST7796) || defined(HACKADAY_COMMUNICATOR) || ARCH_PORTDUINO) &&                                                 \
+     defined(USE_ST7796) || defined(CO5300_CS) || defined(HACKADAY_COMMUNICATOR) || ARCH_PORTDUINO) &&                           \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 const uint8_t imgQuestionL1[] PROGMEM = {0xff, 0x01, 0x01, 0x32, 0x7b, 0x49, 0x49, 0x6f, 0x26, 0x01, 0x01, 0xff};
 const uint8_t imgQuestionL2[] PROGMEM = {0x0f, 0x08, 0x08, 0x08, 0x06, 0x0f, 0x0f, 0x06, 0x08, 0x08, 0x08, 0x0f};

src/input/TouchScreenBase.cpp

@@ -151,7 +151,7 @@ int32_t TouchScreenBase::runOnce()
 
 void TouchScreenBase::hapticFeedback()
 {
-#ifdef T_WATCH_S3
+#if defined(T_WATCH_S3) || defined(T_WATCH_ULTRA)
     drv.setWaveform(0, 75);
     drv.setWaveform(1, 0); // end waveform
     drv.go();

src/main.cpp

@@ -438,6 +438,32 @@ void setup()
     io.pinMode(EXPANDS_GPIO_EN, OUTPUT);
     io.digitalWrite(EXPANDS_GPIO_EN, HIGH);
     io.pinMode(EXPANDS_SD_PULLEN, INPUT);
+#elif defined(T_WATCH_ULTRA)
+    pinMode(LORA_CS, OUTPUT);
+    digitalWrite(LORA_CS, HIGH);
+    pinMode(DISP_CS, OUTPUT);
+    digitalWrite(DISP_CS, HIGH);
+    pinMode(SDCARD_CS, OUTPUT);
+    digitalWrite(SDCARD_CS, HIGH);
+
+    if (io.begin(Wire, XL9555_SLAVE_ADDRESS0)) {
+        io.pinMode(EXPANDS_DRV_EN, OUTPUT);
+        io.digitalWrite(EXPANDS_DRV_EN, HIGH);
+        delay(1);
+        io.pinMode(EXPANDS_DISP_EN, OUTPUT);
+        io.digitalWrite(EXPANDS_DISP_EN, HIGH);
+        delay(1);
+        io.pinMode(EXPANDS_TOUCH_RST, OUTPUT);
+        io.digitalWrite(EXPANDS_TOUCH_RST, LOW);
+        delay(20);
+        io.digitalWrite(EXPANDS_TOUCH_RST, HIGH);
+        delay(60);
+        io.pinMode(EXPANDS_LORA_RF_SW, OUTPUT);
+        io.digitalWrite(EXPANDS_LORA_RF_SW, HIGH); // set RF switch to built-in LoRa antenna
+        // io.pinMode(EXPANDS_SD_DET, INPUT);
+    } else {
+        LOG_ERROR("io expander initialisation failed!");
+    }
 #elif defined(HACKADAY_COMMUNICATOR)
     pinMode(KB_INT, INPUT);
 #endif
@@ -949,7 +975,7 @@ void setup()
 
 #if defined(ST7701_CS) || defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) ||       \
     defined(ST7789_CS) || defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(ST7796_CS) ||              \
-    defined(USE_SPISSD1306) || defined(USE_ST7796) || defined(HACKADAY_COMMUNICATOR)
+    defined(USE_SPISSD1306) || defined(USE_ST7796) || defined(CO5300_CS) || defined(HACKADAY_COMMUNICATOR)
         screen = new graphics::Screen(screen_found, screen_model, screen_geometry);
 #elif defined(ARCH_PORTDUINO)
         if ((screen_found.port != ScanI2C::I2CPort::NO_I2C || portduino_config.displayPanel) &&
@@ -1244,7 +1270,7 @@ void setup()
 // the current region name)
 #if defined(ST7701_CS) || defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) ||       \
     defined(ST7789_CS) || defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(ST7796_CS) ||              \
-    defined(USE_ST7796) || defined(USE_SPISSD1306) || defined(HACKADAY_COMMUNICATOR)
+    defined(USE_ST7796) || defined(USE_SPISSD1306) || defined(CO5300_CS) || defined(HACKADAY_COMMUNICATOR)
     if (screen)
         screen->setup();
 #elif defined(ARCH_PORTDUINO)

src/mesh/NodeDB.cpp

@@ -670,7 +670,7 @@ void NodeDB::installDefaultConfig(bool preserveKey = false)
     strncpy(config.network.ntp_server, "meshtastic.pool.ntp.org", 32);
 
 #if (defined(T_DECK) || defined(T_WATCH_S3) || defined(UNPHONE) || defined(PICOMPUTER_S3) || defined(SENSECAP_INDICATOR) ||      \
-     defined(ELECROW_PANEL) || defined(HELTEC_V4_TFT)) &&                                                                        \
+     defined(ELECROW_PANEL) || defined(HELTEC_V4_TFT) || defined(T_WATCH_ULTRA)) &&                                              \
     HAS_TFT
     // switch BT off by default; use TFT programming mode or hotkey to enable
     config.bluetooth.enabled = false;
@@ -748,7 +748,7 @@ void NodeDB::installDefaultConfig(bool preserveKey = false)
 #ifdef RAK4630
     config.display.wake_on_tap_or_motion = true;
 #endif
-#if defined(T_WATCH_S3) || defined(SENSECAP_INDICATOR)
+#if defined(T_WATCH_S3) || defined(SENSECAP_INDICATOR) || defined(T_WATCH_ULTRA)
     config.display.screen_on_secs = 30;
     config.display.wake_on_tap_or_motion = true;
 #endif

src/mesh/RadioInterface.cpp

@@ -666,18 +666,24 @@ void RadioInterface::limitPower(int8_t loraMaxPower)
         power = maxPower;
     }
 
-#ifndef NUM_PA_POINTS
+#ifdef ARCH_PORTDUINO
-    if (TX_GAIN_LORA > 0 && !devicestate.owner.is_licensed) {
+    size_t num_pa_points = portduino_config.num_pa_points;
-        LOG_INFO("Requested Tx power: %d dBm; Device LoRa Tx gain: %d dB", power, TX_GAIN_LORA);
+    const uint16_t *tx_gain = portduino_config.tx_gain_lora;
-        power -= TX_GAIN_LORA;
-    }
 #else
-    if (!devicestate.owner.is_licensed) {
+    size_t num_pa_points = NUM_PA_POINTS;
+    const uint16_t tx_gain[NUM_PA_POINTS] = {TX_GAIN_LORA};
+#endif
+
+    if (num_pa_points == 1) {
+        if (tx_gain[0] > 0 && !devicestate.owner.is_licensed) {
+            LOG_INFO("Requested Tx power: %d dBm; Device LoRa Tx gain: %d dB", power, tx_gain[0]);
+            power -= tx_gain[0];
+        }
+    } else if (!devicestate.owner.is_licensed) {
         // we have an array of PA gain values.  Find the highest power setting that works.
-        const uint16_t tx_gain[NUM_PA_POINTS] = {TX_GAIN_LORA};
+        for (int radio_dbm = 0; radio_dbm < num_pa_points; radio_dbm++) {
-        for (int radio_dbm = 0; radio_dbm < NUM_PA_POINTS; radio_dbm++) {
             if (((radio_dbm + tx_gain[radio_dbm]) > power) ||
-                ((radio_dbm == (NUM_PA_POINTS - 1)) && ((radio_dbm + tx_gain[radio_dbm]) <= power))) {
+                ((radio_dbm == (num_pa_points - 1)) && ((radio_dbm + tx_gain[radio_dbm]) <= power))) {
                 // we've exceeded the power limit, or hit the max we can do
                 LOG_INFO("Requested Tx power: %d dBm; Device LoRa Tx gain: %d dB", power, tx_gain[radio_dbm]);
                 power -= tx_gain[radio_dbm];
@@ -685,7 +691,7 @@ void RadioInterface::limitPower(int8_t loraMaxPower)
             }
         }
     }
-#endif
+
     if (power > loraMaxPower) // Clamp power to maximum defined level
         power = loraMaxPower;
 

src/mesh/generated/meshtastic/admin.pb.h

@@ -77,7 +77,9 @@ typedef enum _meshtastic_AdminMessage_ModuleConfigType {
     /* TODO: REPLACE */
     meshtastic_AdminMessage_ModuleConfigType_DETECTIONSENSOR_CONFIG = 11,
     /* TODO: REPLACE */
-    meshtastic_AdminMessage_ModuleConfigType_PAXCOUNTER_CONFIG = 12
+    meshtastic_AdminMessage_ModuleConfigType_PAXCOUNTER_CONFIG = 12,
+    /* TODO: REPLACE */
+    meshtastic_AdminMessage_ModuleConfigType_STATUSMESSAGE_CONFIG = 13
 } meshtastic_AdminMessage_ModuleConfigType;
 
 typedef enum _meshtastic_AdminMessage_BackupLocation {
@@ -323,8 +325,8 @@ extern "C" {
 #define _meshtastic_AdminMessage_ConfigType_ARRAYSIZE ((meshtastic_AdminMessage_ConfigType)(meshtastic_AdminMessage_ConfigType_DEVICEUI_CONFIG+1))
 
 #define _meshtastic_AdminMessage_ModuleConfigType_MIN meshtastic_AdminMessage_ModuleConfigType_MQTT_CONFIG
-#define _meshtastic_AdminMessage_ModuleConfigType_MAX meshtastic_AdminMessage_ModuleConfigType_PAXCOUNTER_CONFIG
+#define _meshtastic_AdminMessage_ModuleConfigType_MAX meshtastic_AdminMessage_ModuleConfigType_STATUSMESSAGE_CONFIG
-#define _meshtastic_AdminMessage_ModuleConfigType_ARRAYSIZE ((meshtastic_AdminMessage_ModuleConfigType)(meshtastic_AdminMessage_ModuleConfigType_PAXCOUNTER_CONFIG+1))
+#define _meshtastic_AdminMessage_ModuleConfigType_ARRAYSIZE ((meshtastic_AdminMessage_ModuleConfigType)(meshtastic_AdminMessage_ModuleConfigType_STATUSMESSAGE_CONFIG+1))
 
 #define _meshtastic_AdminMessage_BackupLocation_MIN meshtastic_AdminMessage_BackupLocation_FLASH
 #define _meshtastic_AdminMessage_BackupLocation_MAX meshtastic_AdminMessage_BackupLocation_SD

src/mesh/generated/meshtastic/deviceonly.pb.h

@@ -361,7 +361,7 @@ extern const pb_msgdesc_t meshtastic_BackupPreferences_msg;
 /* Maximum encoded size of messages (where known) */
 /* meshtastic_NodeDatabase_size depends on runtime parameters */
 #define MESHTASTIC_MESHTASTIC_DEVICEONLY_PB_H_MAX_SIZE meshtastic_BackupPreferences_size
-#define meshtastic_BackupPreferences_size        2279
+#define meshtastic_BackupPreferences_size        2362
 #define meshtastic_ChannelFile_size              718
 #define meshtastic_DeviceState_size              1737
 #define meshtastic_NodeInfoLite_size             196

src/mesh/generated/meshtastic/localonly.pb.h

@@ -87,6 +87,9 @@ typedef struct _meshtastic_LocalModuleConfig {
     /* Paxcounter Config */
     bool has_paxcounter;
     meshtastic_ModuleConfig_PaxcounterConfig paxcounter;
+    /* StatusMessage Config */
+    bool has_statusmessage;
+    meshtastic_ModuleConfig_StatusMessageConfig statusmessage;
 } meshtastic_LocalModuleConfig;
 
 
@@ -96,9 +99,9 @@ extern "C" {
 
 /* Initializer values for message structs */
 #define meshtastic_LocalConfig_init_default      {false, meshtastic_Config_DeviceConfig_init_default, false, meshtastic_Config_PositionConfig_init_default, false, meshtastic_Config_PowerConfig_init_default, false, meshtastic_Config_NetworkConfig_init_default, false, meshtastic_Config_DisplayConfig_init_default, false, meshtastic_Config_LoRaConfig_init_default, false, meshtastic_Config_BluetoothConfig_init_default, 0, false, meshtastic_Config_SecurityConfig_init_default}
-#define meshtastic_LocalModuleConfig_init_default {false, meshtastic_ModuleConfig_MQTTConfig_init_default, false, meshtastic_ModuleConfig_SerialConfig_init_default, false, meshtastic_ModuleConfig_ExternalNotificationConfig_init_default, false, meshtastic_ModuleConfig_StoreForwardConfig_init_default, false, meshtastic_ModuleConfig_RangeTestConfig_init_default, false, meshtastic_ModuleConfig_TelemetryConfig_init_default, false, meshtastic_ModuleConfig_CannedMessageConfig_init_default, 0, false, meshtastic_ModuleConfig_AudioConfig_init_default, false, meshtastic_ModuleConfig_RemoteHardwareConfig_init_default, false, meshtastic_ModuleConfig_NeighborInfoConfig_init_default, false, meshtastic_ModuleConfig_AmbientLightingConfig_init_default, false, meshtastic_ModuleConfig_DetectionSensorConfig_init_default, false, meshtastic_ModuleConfig_PaxcounterConfig_init_default}
+#define meshtastic_LocalModuleConfig_init_default {false, meshtastic_ModuleConfig_MQTTConfig_init_default, false, meshtastic_ModuleConfig_SerialConfig_init_default, false, meshtastic_ModuleConfig_ExternalNotificationConfig_init_default, false, meshtastic_ModuleConfig_StoreForwardConfig_init_default, false, meshtastic_ModuleConfig_RangeTestConfig_init_default, false, meshtastic_ModuleConfig_TelemetryConfig_init_default, false, meshtastic_ModuleConfig_CannedMessageConfig_init_default, 0, false, meshtastic_ModuleConfig_AudioConfig_init_default, false, meshtastic_ModuleConfig_RemoteHardwareConfig_init_default, false, meshtastic_ModuleConfig_NeighborInfoConfig_init_default, false, meshtastic_ModuleConfig_AmbientLightingConfig_init_default, false, meshtastic_ModuleConfig_DetectionSensorConfig_init_default, false, meshtastic_ModuleConfig_PaxcounterConfig_init_default, false, meshtastic_ModuleConfig_StatusMessageConfig_init_default}
 #define meshtastic_LocalConfig_init_zero         {false, meshtastic_Config_DeviceConfig_init_zero, false, meshtastic_Config_PositionConfig_init_zero, false, meshtastic_Config_PowerConfig_init_zero, false, meshtastic_Config_NetworkConfig_init_zero, false, meshtastic_Config_DisplayConfig_init_zero, false, meshtastic_Config_LoRaConfig_init_zero, false, meshtastic_Config_BluetoothConfig_init_zero, 0, false, meshtastic_Config_SecurityConfig_init_zero}
-#define meshtastic_LocalModuleConfig_init_zero   {false, meshtastic_ModuleConfig_MQTTConfig_init_zero, false, meshtastic_ModuleConfig_SerialConfig_init_zero, false, meshtastic_ModuleConfig_ExternalNotificationConfig_init_zero, false, meshtastic_ModuleConfig_StoreForwardConfig_init_zero, false, meshtastic_ModuleConfig_RangeTestConfig_init_zero, false, meshtastic_ModuleConfig_TelemetryConfig_init_zero, false, meshtastic_ModuleConfig_CannedMessageConfig_init_zero, 0, false, meshtastic_ModuleConfig_AudioConfig_init_zero, false, meshtastic_ModuleConfig_RemoteHardwareConfig_init_zero, false, meshtastic_ModuleConfig_NeighborInfoConfig_init_zero, false, meshtastic_ModuleConfig_AmbientLightingConfig_init_zero, false, meshtastic_ModuleConfig_DetectionSensorConfig_init_zero, false, meshtastic_ModuleConfig_PaxcounterConfig_init_zero}
+#define meshtastic_LocalModuleConfig_init_zero   {false, meshtastic_ModuleConfig_MQTTConfig_init_zero, false, meshtastic_ModuleConfig_SerialConfig_init_zero, false, meshtastic_ModuleConfig_ExternalNotificationConfig_init_zero, false, meshtastic_ModuleConfig_StoreForwardConfig_init_zero, false, meshtastic_ModuleConfig_RangeTestConfig_init_zero, false, meshtastic_ModuleConfig_TelemetryConfig_init_zero, false, meshtastic_ModuleConfig_CannedMessageConfig_init_zero, 0, false, meshtastic_ModuleConfig_AudioConfig_init_zero, false, meshtastic_ModuleConfig_RemoteHardwareConfig_init_zero, false, meshtastic_ModuleConfig_NeighborInfoConfig_init_zero, false, meshtastic_ModuleConfig_AmbientLightingConfig_init_zero, false, meshtastic_ModuleConfig_DetectionSensorConfig_init_zero, false, meshtastic_ModuleConfig_PaxcounterConfig_init_zero, false, meshtastic_ModuleConfig_StatusMessageConfig_init_zero}
 
 /* Field tags (for use in manual encoding/decoding) */
 #define meshtastic_LocalConfig_device_tag        1
@@ -124,6 +127,7 @@ extern "C" {
 #define meshtastic_LocalModuleConfig_ambient_lighting_tag 12
 #define meshtastic_LocalModuleConfig_detection_sensor_tag 13
 #define meshtastic_LocalModuleConfig_paxcounter_tag 14
+#define meshtastic_LocalModuleConfig_statusmessage_tag 15
 
 /* Struct field encoding specification for nanopb */
 #define meshtastic_LocalConfig_FIELDLIST(X, a) \
@@ -161,7 +165,8 @@ X(a, STATIC,   OPTIONAL, MESSAGE,  remote_hardware,  10) \
 X(a, STATIC,   OPTIONAL, MESSAGE,  neighbor_info,    11) \
 X(a, STATIC,   OPTIONAL, MESSAGE,  ambient_lighting,  12) \
 X(a, STATIC,   OPTIONAL, MESSAGE,  detection_sensor,  13) \
-X(a, STATIC,   OPTIONAL, MESSAGE,  paxcounter,       14)
+X(a, STATIC,   OPTIONAL, MESSAGE,  paxcounter,       14) \
+X(a, STATIC,   OPTIONAL, MESSAGE,  statusmessage,    15)
 #define meshtastic_LocalModuleConfig_CALLBACK NULL
 #define meshtastic_LocalModuleConfig_DEFAULT NULL
 #define meshtastic_LocalModuleConfig_mqtt_MSGTYPE meshtastic_ModuleConfig_MQTTConfig
@@ -177,6 +182,7 @@ X(a, STATIC,   OPTIONAL, MESSAGE,  paxcounter,       14)
 #define meshtastic_LocalModuleConfig_ambient_lighting_MSGTYPE meshtastic_ModuleConfig_AmbientLightingConfig
 #define meshtastic_LocalModuleConfig_detection_sensor_MSGTYPE meshtastic_ModuleConfig_DetectionSensorConfig
 #define meshtastic_LocalModuleConfig_paxcounter_MSGTYPE meshtastic_ModuleConfig_PaxcounterConfig
+#define meshtastic_LocalModuleConfig_statusmessage_MSGTYPE meshtastic_ModuleConfig_StatusMessageConfig
 
 extern const pb_msgdesc_t meshtastic_LocalConfig_msg;
 extern const pb_msgdesc_t meshtastic_LocalModuleConfig_msg;
@@ -186,9 +192,9 @@ extern const pb_msgdesc_t meshtastic_LocalModuleConfig_msg;
 #define meshtastic_LocalModuleConfig_fields &meshtastic_LocalModuleConfig_msg
 
 /* Maximum encoded size of messages (where known) */
-#define MESHTASTIC_MESHTASTIC_LOCALONLY_PB_H_MAX_SIZE meshtastic_LocalConfig_size
+#define MESHTASTIC_MESHTASTIC_LOCALONLY_PB_H_MAX_SIZE meshtastic_LocalModuleConfig_size
 #define meshtastic_LocalConfig_size              749
-#define meshtastic_LocalModuleConfig_size        675
+#define meshtastic_LocalModuleConfig_size        758
 
 #ifdef __cplusplus
 } /* extern "C" */

src/modules/PositionModule.cpp

@@ -60,7 +60,7 @@ bool PositionModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, mes
         if (config.position.fixed_position) {
             LOG_DEBUG("Ignore incoming position update from myself except for time, because position.fixed_position is true");
 
-#ifdef T_WATCH_S3
+#if defined(T_WATCH_S3) || defined(T_WATCH_ULTRA)
             // Since we return early if position.fixed_position is true, set the T-Watch's RTC to the time received from the
             // client device here
             if (p.time && channels.getByIndex(mp.channel).role == meshtastic_Channel_Role_PRIMARY) {

src/platform/esp32/architecture.h

@@ -205,6 +205,8 @@
 #define HW_VENDOR meshtastic_HardwareModel_M5STACK_C6L
 #elif defined(HELTEC_WIRELESS_TRACKER_V2)
 #define HW_VENDOR meshtastic_HardwareModel_HELTEC_WIRELESS_TRACKER_V2
+#elif defined(T_WATCH_ULTRA)
+#define HW_VENDOR meshtastic_HardwareModel_T_WATCH_ULTRA
 #else
 #define HW_VENDOR meshtastic_HardwareModel_PRIVATE_HW
 #endif

src/platform/extra_variants/t_watch_ultra/variant.cpp

@@ -0,0 +1,31 @@
+#include "configuration.h"
+
+#ifdef T_WATCH_ULTRA
+
+#include "Arduino.h"
+#include "TouchDrvCSTXXX.hpp"
+#include "input/TouchScreenImpl1.h"
+#include <Wire.h>
+
+static TouchDrvCST92xx touchDrv;
+
+static bool readTouch(int16_t *x, int16_t *y)
+{
+    return touchDrv.isPressed() && touchDrv.getPoint(x, y, 1);
+}
+
+// T-Watch Ultra specific init
+void lateInitVariant()
+{
+    if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
+        pinMode(SCREEN_TOUCH_INT, INPUT_PULLUP);
+        touchDrv.setPins(-1, SCREEN_TOUCH_INT);
+        if (touchDrv.begin(Wire, TOUCH_SLAVE_ADDRESS, I2C_SDA, I2C_SCL)) {
+            touchScreenImpl1 = new TouchScreenImpl1(TFT_WIDTH, TFT_HEIGHT, readTouch);
+            touchScreenImpl1->init();
+        } else {
+            LOG_ERROR("failed to initialize CST92xx");
+        }
+    }
+}
+#endif

src/platform/nrf52/NRF52Bluetooth.cpp

@@ -240,6 +240,14 @@ int NRF52Bluetooth::getRssi()
 {
     return 0; // FIXME figure out where to source this
 }
+
+// Valid BLE TX power levels as per nRF52840 Product Specification are: "-20 to +8 dBm TX power, configurable in 4 dB steps".
+// See https://docs.nordicsemi.com/bundle/ps_nrf52840/page/keyfeatures_html5.html
+#define VALID_BLE_TX_POWER(x) \
+    ((x) == -20 || (x) == -16 || (x) == -12 || \
+     (x) == -8  || (x) == -4  || (x) == 0  || \
+     (x) == 4  || (x) == 8)
+
 void NRF52Bluetooth::setup()
 {
     // Initialise the Bluefruit module
@@ -251,6 +259,9 @@ void NRF52Bluetooth::setup()
     Bluefruit.Advertising.stop();
     Bluefruit.Advertising.clearData();
     Bluefruit.ScanResponse.clearData();
+#if defined(NRF52_BLE_TX_POWER) && VALID_BLE_TX_POWER(NRF52_BLE_TX_POWER)
+    Bluefruit.setTxPower(NRF52_BLE_TX_POWER);
+#endif
     if (config.bluetooth.mode != meshtastic_Config_BluetoothConfig_PairingMode_NO_PIN) {
         configuredPasskey = config.bluetooth.mode == meshtastic_Config_BluetoothConfig_PairingMode_FIXED_PIN
                                 ? config.bluetooth.fixed_pin

src/platform/portduino/PortduinoGlue.cpp

@@ -61,11 +61,12 @@ static error_t parse_opt(int key, char *arg, struct argp_state *state)
 {
     switch (key) {
     case 'p':
-        if (sscanf(arg, "%d", &TCPPort) < 1)
+        if (sscanf(arg, "%d", &TCPPort) < 1) {
             return ARGP_ERR_UNKNOWN;
-        else
+        } else {
             checkConfigPort = false;
             printf("Using config file %d\n", TCPPort);
+        }
         break;
     case 'c':
         configPath = arg;
@@ -649,6 +650,19 @@ bool loadConfig(const char *configPath)
             if (yamlConfig["Lora"]["RF95_MAX_POWER"])
                 portduino_config.rf95_max_power = yamlConfig["Lora"]["RF95_MAX_POWER"].as<int>(20);
 
+            if (yamlConfig["Lora"]["TX_GAIN_LORA"]) {
+                YAML::Node tx_gain_node = yamlConfig["Lora"]["TX_GAIN_LORA"];
+                if (tx_gain_node.IsSequence() && tx_gain_node.size() != 0) {
+                    portduino_config.num_pa_points = min(tx_gain_node.size(), std::size(portduino_config.tx_gain_lora));
+                    for (int i = 0; i < portduino_config.num_pa_points; i++) {
+                        portduino_config.tx_gain_lora[i] = tx_gain_node[i].as<int>();
+                    }
+                } else {
+                    portduino_config.num_pa_points = 1;
+                    portduino_config.tx_gain_lora[0] = tx_gain_node.as<int>(0);
+                }
+            }
+
             if (portduino_config.lora_module != use_autoconf && portduino_config.lora_module != use_simradio &&
                 !portduino_config.force_simradio) {
                 portduino_config.dio2_as_rf_switch = yamlConfig["Lora"]["DIO2_AS_RF_SWITCH"].as<bool>(false);
@@ -874,10 +888,8 @@ bool loadConfig(const char *configPath)
             }
             if (checkConfigPort) {
                 portduino_config.api_port = (yamlConfig["General"]["APIPort"]).as<int>(-1);
-                if (portduino_config.api_port != -1 &&
+                if (portduino_config.api_port != -1 && portduino_config.api_port > 1023 && portduino_config.api_port < 65536) {
-                portduino_config.api_port > 1023 &&
+                    TCPPort = (portduino_config.api_port);
-                portduino_config.api_port < 65536) {
-                TCPPort = (portduino_config.api_port);
                 }
             }
             portduino_config.mac_address = (yamlConfig["General"]["MACAddress"]).as<std::string>("");

src/platform/portduino/PortduinoGlue.h

@@ -91,6 +91,8 @@ extern struct portduino_config_struct {
     int lora_usb_pid = 0x5512;
     int lora_usb_vid = 0x1A86;
     int spiSpeed = 2000000;
+    int num_pa_points = 1; // default to 1 point, with 0 gain
+    uint16_t tx_gain_lora[22] = {0};
     pinMapping lora_cs_pin = {"Lora", "CS"};
     pinMapping lora_irq_pin = {"Lora", "IRQ"};
     pinMapping lora_busy_pin = {"Lora", "Busy"};
@@ -231,6 +233,17 @@ extern struct portduino_config_struct {
             out << YAML::Key << "LR1120_MAX_POWER" << YAML::Value << lr1120_max_power;
         if (rf95_max_power != 20)
             out << YAML::Key << "RF95_MAX_POWER" << YAML::Value << rf95_max_power;
+
+        if (num_pa_points > 1) {
+            out << YAML::Key << "TX_GAIN_LORA" << YAML::Value << YAML::Flow << YAML::BeginSeq;
+            for (int i = 0; i < num_pa_points; i++) {
+                out << YAML::Value << tx_gain_lora[i];
+            }
+            out << YAML::EndSeq;
+        } else if (tx_gain_lora[0] != 0) {
+            out << YAML::Key << "TX_GAIN_LORA" << YAML::Value << tx_gain_lora[0];
+        }
+
         out << YAML::Key << "DIO2_AS_RF_SWITCH" << YAML::Value << dio2_as_rf_switch;
         if (dio3_tcxo_voltage != 0)
             out << YAML::Key << "DIO3_TCXO_VOLTAGE" << YAML::Value << YAML::Precision(3) << (float)dio3_tcxo_voltage / 1000;

src/sleep.cpp

@@ -339,7 +339,7 @@ void doDeepSleep(uint32_t msecToWake, bool skipPreflight = false, bool skipSaveN
                 // t-beam v1.2 radio power channel
                 PMU->disablePowerOutput(XPOWERS_ALDO2); // lora radio power channel
             } else if (HW_VENDOR == meshtastic_HardwareModel_LILYGO_TBEAM_S3_CORE ||
-                       HW_VENDOR == meshtastic_HardwareModel_T_WATCH_S3) {
+                       HW_VENDOR == meshtastic_HardwareModel_T_WATCH_S3 || HW_VENDOR == meshtastic_HardwareModel_T_WATCH_ULTRA) {
                 PMU->disablePowerOutput(XPOWERS_ALDO3); // lora radio power channel
             }
         } else if (model == XPOWERS_AXP192) {

variants/esp32s3/CDEBYTE_EoRa-Hub/rfswitch.h

@@ -8,7 +8,8 @@
 // DIO6 -> RFSW1_V2
 // DIO7 -> not connected on E80 module - note that GNSS and Wifi scanning are not possible.
 
-static const uint32_t rfswitch_dio_pins[] = {RADIOLIB_LR11X0_DIO5, RADIOLIB_LR11X0_DIO6, RADIOLIB_LR11X0_DIO7, RADIOLIB_NC, RADIOLIB_NC};
+static const uint32_t rfswitch_dio_pins[] = {RADIOLIB_LR11X0_DIO5, RADIOLIB_LR11X0_DIO6, RADIOLIB_LR11X0_DIO7, RADIOLIB_NC,
+                                             RADIOLIB_NC};
 
 static const Module::RfSwitchMode_t rfswitch_table[] = {
     // mode             DIO5  DIO6  DIO7

variants/esp32s3/t-deck-pro/variant.h

@@ -30,6 +30,7 @@
 
 // vibration motor
 #define PIN_VIBRATION 2
+#define HAS_DRV2605 1
 
 // Have SPI interface SD card slot
 #define HAS_SDCARD

variants/esp32s3/t-watch-ultra/pins_arduino.h

@@ -0,0 +1,94 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+// #ifndef digitalPinToInterrupt
+// #define digitalPinToInterrupt(p) (((p) < 48) ? (p) : -1)
+// #endif
+
+#define USB_VID 0x303a
+#define USB_PID 0x8227
+#define USB_MANUFACTURER "LILYGO"
+#define USB_PRODUCT "T-Watch-Ultra"
+
+#define DISP_WIDTH 502
+#define DISP_HEIGHT 410
+
+// QSPI interface display
+#define DISP_D0 (38)
+#define DISP_D1 (39)
+#define DISP_D2 (42)
+#define DISP_D3 (45)
+#define DISP_SCK (40)
+#define DISP_CS (41)
+#define DISP_RST (37)
+#define DISP_TE (6)
+
+// Interrupt IO port
+#define TP_INT (12)
+#define RTC_INT (1)
+#define PMU_INT (7)
+#define NFC_INT (5)
+#define SENSOR_INT (8)
+#define NFC_CS (4)
+
+// PDM microphone
+#define MIC_SCK (17)
+#define MIC_DAT (18)
+
+// MAX98357A
+#define I2S_BCLK (9)
+#define I2S_WCLK (10)
+#define I2S_DOUT (11)
+
+#define SD_CS (21)
+
+// TX, RX pin connected to GPS
+static const uint8_t TX = 43;
+static const uint8_t RX = 44;
+
+// BHI260,PCF85063,AXP2101,DRV2605L share I2C Bus
+static const uint8_t SDA = 3;
+static const uint8_t SCL = 2;
+
+// Default sd cs pin
+static const uint8_t SS = SD_CS;
+static const uint8_t MOSI = 34;
+static const uint8_t MISO = 33;
+static const uint8_t SCK = 35;
+
+#define GPS_TX (TX)
+#define GPS_RX (RX)
+#define GPS_PPS (13)
+
+#define TP_SDA (SDA)
+#define TP_SCL (SCL)
+
+// LoRa and SD card share SPI bus -> variant.h
+// #define LORA_SCK  (SCK)   // share spi bus
+// #define LORA_MISO (MISO)  // share spi bus
+// #define LORA_MOSI (MOSI)  // share spi bus
+// #define LORA_CS   (36)
+// #define LORA_RST  (47)
+// #define LORA_BUSY (48)
+// #define LORA_IRQ  (14)
+
+// External expansion chip IO definition
+#define EXPANDS_DRV_EN (6)
+#define EXPANDS_DISP_EN (7)
+#define EXPANDS_TOUCH_RST (8)
+#define EXPANDS_SD_DET (10)
+#define EXPANDS_LORA_RF_SW (11)
+
+// Peripheral definition exists
+#define USING_XL9555_EXPANDS
+#define USING_PCM_AMPLIFIER
+#define USING_PDM_MICROPHONE
+#define USING_PMU_MANAGE
+#define USING_INPUT_DEV_TOUCHPAD
+#define USING_ST25R3916
+#define USING_BHI260_SENSOR
+#define HAS_SD_CARD_SOCKET
+
+#endif /* Pins_Arduino_h */

variants/esp32s3/t-watch-ultra/platformio.ini

@@ -0,0 +1,63 @@
+; LilyGo T-Watch S3
+[env:t-watch-ultra]
+extends = esp32s3_base
+board = t-watch-ultra
+board_check = true
+board_build.partitions = default_16MB.csv
+upload_protocol = esptool
+
+build_flags = ${esp32_base.build_flags} -Ivariants/esp32s3/t-watch-ultra
+  -D T_WATCH_ULTRA
+  -D RADIOLIB_EXCLUDE_SX128X=1
+  -D RADIOLIB_EXCLUDE_SX127X=1
+  -D RADIOLIB_EXCLUDE_LR11X0=1
+;  -D HAS_SDCARD
+  -D SDCARD_CS=21
+;  -DHAS_BMA423=1
+
+lib_deps = ${esp32s3_base.lib_deps}
+  https://github.com/lovyan03/LovyanGFX/archive/tags/1.2.19.zip
+  adafruit/Adafruit DRV2605 Library@^1.2.4
+  earlephilhower/ESP8266Audio@^1.9.9
+  earlephilhower/ESP8266SAM@^1.0.1
+  lewisxhe/SensorLib@0.3.1
+
+[env:t-watch-ultra-tft]
+board_level = extra
+extends = env:t-watch-ultra
+build_flags =
+  ${env:t-watch-ultra.build_flags}
+  -D CONFIG_DISABLE_HAL_LOCKS=1
+  -D INPUTDRIVER_BUTTON_TYPE=0
+  -D HAS_SCREEN=1
+  -D HAS_TFT=1
+  -D USE_I2S_BUZZER
+  -D RAM_SIZE=5120
+  -D LV_LVGL_H_INCLUDE_SIMPLE
+  -D LV_CONF_INCLUDE_SIMPLE
+  -D LV_COMP_CONF_INCLUDE_SIMPLE
+  -D LV_USE_SYSMON=0
+  -D LV_USE_PROFILER=0
+  -D LV_USE_PERF_MONITOR=0
+  -D LV_USE_MEM_MONITOR=0
+  -D LV_USE_LOG=0
+  -D USE_LOG_DEBUG
+  -D LOG_DEBUG_INC=\"DebugConfiguration.h\"
+  -D RADIOLIB_SPI_PARANOID=0
+  -D LGFX_SCREEN_WIDTH=410
+  -D LGFX_SCREEN_HEIGHT=502
+  -D LGFX_AMOLED_ROUNDER=1
+  -D LGFX_BUFSIZE=308732
+  -D DISPLAY_SIZE=410x502 ; portrait mode
+  -D DISPLAY_SET_RESOLUTION
+  -D LGFX_DRIVER=LGFX_TWATCH_ULTRA
+  -D GFX_DRIVER_INC=\"graphics/LGFX/LGFX_T_WATCH_ULTRA.h\"
+;  -D LVGL_DRIVER=LVGL_T_WATCH_ULTRA
+  -D VIEW_320x240
+  -D USE_PACKET_API
+  -D MAP_FULL_REDRAW
+  -D CUSTOM_TOUCH_DRIVER
+
+lib_deps =
+  ${env:t-watch-ultra.lib_deps}
+  ${device-ui_base.lib_deps}

variants/esp32s3/t-watch-ultra/variant.h

@@ -0,0 +1,90 @@
+
+// CO5300 TFT AMOLED
+#define CO5300_CS 41
+#define CO5300_SCK 40
+#define CO5300_RESET 37
+#define CO5300_TE 6
+#define CO5300_IO0 38
+#define CO5300_IO1 39
+#define CO5300_IO2 42
+#define CO5300_IO3 45
+#define CO5300_SPI_HOST SPI2_HOST
+#define SPI_FREQUENCY 75000000
+#define SPI_READ_FREQUENCY 16000000 // irrelevant
+#define TFT_HEIGHT 502
+#define TFT_WIDTH 410
+#define TFT_OFFSET_X 22
+#define TFT_OFFSET_Y 0
+#define TFT_OFFSET_ROTATION 0
+#define SCREEN_TRANSITION_FRAMERATE 5 // fps
+#define USE_TFTDISPLAY 1
+
+#define HAS_TOUCHSCREEN 1
+#define SCREEN_TOUCH_INT 12
+#define TOUCH_I2C_PORT 0
+#define TOUCH_SLAVE_ADDRESS 0x1A
+#define WAKE_ON_TOUCH
+
+#define BUTTON_PIN 0
+
+#define USE_POWERSAVE
+#define SLEEP_TIME 120
+
+// External expansion chip XL9555
+#define USE_XL9555
+
+// PCF85063 RTC Module
+#define PCF85063_RTC 0x51
+#define HAS_RTC 1
+
+// MAX98357A
+#define HAS_I2S
+#define DAC_I2S_BCK 9
+#define DAC_I2S_WS 10
+#define DAC_I2S_DOUT 11
+#define DAC_I2S_MCLK 0 // TODO
+
+#define HAS_AXP2101
+// #define PMU_IRQ 7
+#define HAS_DRV2605 1
+
+#define I2C_SDA 3
+#define I2C_SCL 2
+#define I2C_NO_RESCAN
+
+#define HAS_GPS 1
+#define GPS_BAUDRATE 38400
+#define GPS_RX_PIN 44
+#define GPS_TX_PIN 43
+#define PIN_GPS_PPS 13
+
+// SPI interface SD card slot
+#define SPI_MOSI MOSI
+#define SPI_SCK SCK
+#define SPI_MISO MISO
+#define SPI_CS 21
+#define SD_SPI_FREQUENCY 75000000U
+
+#define USE_SX1262
+// #define USE_SX1280
+
+#define LORA_SCK 35
+#define LORA_MISO 33
+#define LORA_MOSI 34
+#define LORA_CS 36
+
+#define LORA_DIO0 -1 // a No connect on the SX1262 module
+#define LORA_RESET 47
+#define LORA_DIO1 14 // SX1262 IRQ
+#define LORA_DIO2 48 // SX1262 BUSY
+#define LORA_DIO3
+
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_DIO2
+#define SX126X_RESET LORA_RESET
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+
+#define USE_VIRTUAL_KEYBOARD 1
+#define DISPLAY_CLOCK_FRAME 1

variants/esp32s3/tlora-pager/variant.h

@@ -71,6 +71,9 @@
 #define DAC_I2S_DIN 17
 #define DAC_I2S_MCLK 10
 
+// haptic driver
+#define HAS_DRV2605 1
+
 // gyroscope BHI260AP
 #define HAS_BHI260AP
 

variants/nrf52840/heltec_mesh_node_t114/variant.h

@@ -150,6 +150,14 @@ No longer populated on PCB
 #define PIN_SPI1_MOSI ST7789_SDA
 #define PIN_SPI1_SCK ST7789_SCK
 
+/*
+ * Bluetooth
+ */
+
+// The bluetooth transmit power on the nRF52840 is adjustable from -20dB to +8dB in steps of 4dB
+// so NRF52_BLE_TX_POWER can be set to -20, -16, -12, -8, -4, 0 (default), 4, and 8.
+//#define NRF52_BLE_TX_POWER 8
+
 /*
  * GPS pins
  */

variants/stm32/russell/platformio.ini

@@ -0,0 +1,21 @@
+; Russell is a board designed to mount on an ER34615/IFR32700 cell and go Up! on a balloon
+; Hardware repository: https://github.com/Meshtastic-Malaysia/russell
+; - RAK3172 STM32WLE5CCU6 MCU + integrated SX1262 LoRa
+; - CDtop CD-PA1010D GPS
+; - Bosch Sensortec BME280 sensor
+; - Consonance CN3158 LiFePO4 solar charger
+[env:russell]
+extends = stm32_base
+board = wiscore_rak3172
+board_level = extra
+board_upload.maximum_size = 233472 ; reserve the last 28KB for filesystem
+build_flags =
+  ${stm32_base.build_flags}
+  -Ivariants/stm32/russell
+  -DPRIVATE_HW
+lib_deps =
+  ${stm32_base.lib_deps}
+	# renovate: datasource=custom.pio depName=Adafruit BME280 packageName=adafruit/library/Adafruit BME280 Library
+	adafruit/Adafruit BME280 Library@2.3.0
+
+upload_port = stlink

variants/stm32/russell/rfswitch.h

@@ -0,0 +1,7 @@
+// Pins from https://forum.rakwireless.com/t/rak3172-internal-schematic/4557/2
+// PB8, PC13
+
+static const RADIOLIB_PIN_TYPE rfswitch_pins[5] = {PB8, PC13, RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC};
+
+static const Module::RfSwitchMode_t rfswitch_table[4] = {
+    {STM32WLx::MODE_IDLE, {LOW, LOW}}, {STM32WLx::MODE_RX, {HIGH, LOW}}, {STM32WLx::MODE_TX_HP, {LOW, HIGH}}, END_OF_MODE_TABLE};

variants/stm32/russell/variant.h

@@ -0,0 +1,41 @@
+#ifndef _VARIANT_RUSSELL_
+#define _VARIANT_RUSSELL_
+
+#define USE_STM32WLx
+
+// I/O
+#define LED_PIN PA0 // Red LED
+#define LED_STATE_ON 1
+#define BUTTON_PIN PH3 // Shared with BOOT0
+#define BUTTON_NEED_PULLUP
+// Charger IC charge/standby pins are open-drain with no hardware pull-up:
+// Internal pull-up is needed on STM32 (TODO)
+// #define EXT_CHRG_DETECT PA5
+// #define EXT_PWR_DETECT PA4
+
+// Bosch Sensortec BME280
+#define HAS_SENSOR 1
+
+// CDtop CD-PA1010D
+#define ENABLE_HWSERIAL1
+#define PIN_SERIAL1_RX PB7
+#define PIN_SERIAL1_TX PB6
+#define HAS_GPS 1
+#define PIN_GPS_STANDBY PA15
+#define GPS_RX_PIN PB7
+#define GPS_TX_PIN PB6
+
+// LoRa
+/*
+ * RAK3172   (-20–85°C) -> No TCXO
+ * RAK3172-T (-40–85°C) -> 3.0V TCXO
+ * https://github.com/RAKWireless/RAK-STM32-RUI/blob/e5a28be8fab1a492bd9223dd425ca33a8a297d90/variants/WisDuo_RAK3172-T_Board/radio_conf.h#L91
+ */
+#define TCXO_OPTIONAL
+#define SX126X_DIO3_TCXO_VOLTAGE 3.0
+
+// Required to avoid Serial1 conflicts due to board definition here:
+// https://github.com/stm32duino/Arduino_Core_STM32/blob/main/variants/STM32WLxx/WL54CCU_WL55CCU_WLE4C(8-B-C)U_WLE5C(8-B-C)U/variant_RAK3172_MODULE.h
+#define RAK3172
+
+#endif

version.properties

@@ -1,4 +1,4 @@
 [VERSION]  
 major = 2
 minor = 7
-build = 18
+build = 19