Remove GPS Baudrate locking for Seeed Xiao S3 Kit

The Seeed Xiao S3 Kit's default GPS is an L76K which operates at 9600 baud, so when this variant was defined that baud rate was specified.

However, this is a development board and it is expected that users can attach their own devices. This includes GPS, which may operate at a different baud rate. The current fixed baud rate prevents this, so this patch removes that setting.

This will revert to the regular automatic probe method. This will successfully detect the L76K as before (the same speed as before since 9600 baud is the first baud rate checked), but also allow other GPSes at other baud rates to be detected.

Thanks to @ScarpMarc for the report

Fixes https://github.com/meshtastic/firmware/issues/9373#issuecomment-3774802763

platformio.ini

@@ -119,7 +119,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/37ad715b76cd6ca4aa500a4a4d9740e3cdf3e3cb.zip
+	https://github.com/meshtastic/device-ui/archive/3480b731d28b10d73414cf0dd7975bff745de8cf.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]

src/Power.cpp

@@ -723,16 +723,6 @@ bool Power::setup()
             runASAP = true;
         },
         CHANGE);
-#endif
-#ifdef EXT_CHRG_DETECT
-    attachInterrupt(
-        EXT_CHRG_DETECT,
-        []() {
-            power->setIntervalFromNow(0);
-            runASAP = true;
-            BaseType_t higherWake = 0;
-        },
-        CHANGE);
 #endif
     enabled = found;
     low_voltage_counter = 0;

src/gps/RTC.cpp

@@ -397,7 +397,7 @@ uint32_t getValidTime(RTCQuality minQuality, bool local)
     return (currentQuality >= minQuality) ? getTime(local) : 0;
 }
 
-time_t gm_mktime(const struct tm *tm)
+time_t gm_mktime(struct tm *tm)
 {
 #if !MESHTASTIC_EXCLUDE_TZ
     time_t result = 0;
@@ -413,8 +413,8 @@ time_t gm_mktime(const struct tm *tm)
     days_before_this_year -= 719162; // (1969 * 365 + 1969 / 4 - 1969 / 100 + 1969 / 400);
 
     // Now, within this tm->year, compute the days *before* this tm->month starts.
-    static const int days_before_month[12] = {0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334}; // non-leap year
+    int days_before_month[12] = {0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334}; // non-leap year
-    int days_this_year_before_this_month = days_before_month[tm->tm_mon];                             // tm->tm_mon is 0..11
+    int days_this_year_before_this_month = days_before_month[tm->tm_mon];                // tm->tm_mon is 0..11
 
     // If this is a leap year, and we're past February, add a day:
     if (tm->tm_mon >= 2 && (year % 4) == 0 && ((year % 100) != 0 || (year % 400) == 0)) {
@@ -435,7 +435,6 @@ time_t gm_mktime(const struct tm *tm)
 
     return result;
 #else
-    struct tm tmCopy = *tm;
+    return mktime(tm);
-    return mktime(&tmCopy);
 #endif
 }

src/gps/RTC.h

@@ -54,7 +54,7 @@ uint32_t getValidTime(RTCQuality minQuality, bool local = false);
 
 RTCSetResult readFromRTC();
 
-time_t gm_mktime(const struct tm *tm);
+time_t gm_mktime(struct tm *tm);
 
 #define SEC_PER_DAY 86400
 #define SEC_PER_HOUR 3600

src/graphics/draw/MenuHandler.cpp

@@ -266,8 +266,52 @@ void menuHandler::FrequencySlotPicker()
 
     // Calculate number of channels (copied from RadioInterface::applyModemConfig())
     meshtastic_Config_LoRaConfig &loraConfig = config.lora;
-    double bw = loraConfig.use_preset ? modemPresetToBwKHz(loraConfig.modem_preset, myRegion->wideLora)
+    double bw = loraConfig.bandwidth;
-                                      : bwCodeToKHz(loraConfig.bandwidth);
+    if (loraConfig.use_preset) {
+        switch (loraConfig.modem_preset) {
+        case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO:
+            bw = (myRegion->wideLora) ? 1625.0 : 500;
+            break;
+        case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST:
+            bw = (myRegion->wideLora) ? 812.5 : 250;
+            break;
+        case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW:
+            bw = (myRegion->wideLora) ? 812.5 : 250;
+            break;
+        case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST:
+            bw = (myRegion->wideLora) ? 812.5 : 250;
+            break;
+        case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW:
+            bw = (myRegion->wideLora) ? 812.5 : 250;
+            break;
+        case meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO:
+            bw = (myRegion->wideLora) ? 1625.0 : 500;
+            break;
+        default:
+            bw = (myRegion->wideLora) ? 812.5 : 250;
+            break;
+        case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
+            bw = (myRegion->wideLora) ? 406.25 : 125;
+            break;
+        case meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW:
+            bw = (myRegion->wideLora) ? 406.25 : 125;
+            break;
+        }
+    } else {
+        bw = loraConfig.bandwidth;
+        if (bw == 31) // This parameter is not an integer
+            bw = 31.25;
+        if (bw == 62) // Fix for 62.5Khz bandwidth
+            bw = 62.5;
+        if (bw == 200)
+            bw = 203.125;
+        if (bw == 400)
+            bw = 406.25;
+        if (bw == 800)
+            bw = 812.5;
+        if (bw == 1600)
+            bw = 1625.0;
+    }
 
     uint32_t numChannels = 0;
     if (myRegion) {

src/graphics/draw/MenuHandler.h

@@ -140,7 +140,7 @@ struct ScreenColor {
     uint8_t b;
     bool useVariant;
 
-    explicit ScreenColor(uint8_t rIn = 0, uint8_t gIn = 0, uint8_t bIn = 0, bool variantIn = false)
+    ScreenColor(uint8_t rIn = 0, uint8_t gIn = 0, uint8_t bIn = 0, bool variantIn = false)
         : r(rIn), g(gIn), b(bIn), useVariant(variantIn)
     {
     }

src/mesh/MeshRadio.h

@@ -23,98 +23,3 @@ extern const RegionInfo regions[];
 extern const RegionInfo *myRegion;
 
 extern void initRegion();
-
-static inline float bwCodeToKHz(uint16_t bwCode)
-{
-    if (bwCode == 31)
-        return 31.25f;
-    if (bwCode == 62)
-        return 62.5f;
-    if (bwCode == 200)
-        return 203.125f;
-    if (bwCode == 400)
-        return 406.25f;
-    if (bwCode == 800)
-        return 812.5f;
-    if (bwCode == 1600)
-        return 1625.0f;
-    return (float)bwCode;
-}
-
-static inline uint16_t bwKHzToCode(float bwKHz)
-{
-    if (bwKHz > 31.24f && bwKHz < 31.26f)
-        return 31;
-    if (bwKHz > 62.49f && bwKHz < 62.51f)
-        return 62;
-    if (bwKHz > 203.12f && bwKHz < 203.13f)
-        return 200;
-    if (bwKHz > 406.24f && bwKHz < 406.26f)
-        return 400;
-    if (bwKHz > 812.49f && bwKHz < 812.51f)
-        return 800;
-    if (bwKHz > 1624.99f && bwKHz < 1625.01f)
-        return 1600;
-    return (uint16_t)(bwKHz + 0.5f);
-}
-
-static inline void modemPresetToParams(meshtastic_Config_LoRaConfig_ModemPreset preset, bool wideLora, float &bwKHz, uint8_t &sf,
-                                       uint8_t &cr)
-{
-    switch (preset) {
-    case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO:
-        bwKHz = wideLora ? 1625.0f : 500.0f;
-        cr = 5;
-        sf = 7;
-        break;
-    case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST:
-        bwKHz = wideLora ? 812.5f : 250.0f;
-        cr = 5;
-        sf = 7;
-        break;
-    case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW:
-        bwKHz = wideLora ? 812.5f : 250.0f;
-        cr = 5;
-        sf = 8;
-        break;
-    case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST:
-        bwKHz = wideLora ? 812.5f : 250.0f;
-        cr = 5;
-        sf = 9;
-        break;
-    case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW:
-        bwKHz = wideLora ? 812.5f : 250.0f;
-        cr = 5;
-        sf = 10;
-        break;
-    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO:
-        bwKHz = wideLora ? 1625.0f : 500.0f;
-        cr = 8;
-        sf = 11;
-        break;
-    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
-        bwKHz = wideLora ? 406.25f : 125.0f;
-        cr = 8;
-        sf = 11;
-        break;
-    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW:
-        bwKHz = wideLora ? 406.25f : 125.0f;
-        cr = 8;
-        sf = 12;
-        break;
-    default: // LONG_FAST (or illegal)
-        bwKHz = wideLora ? 812.5f : 250.0f;
-        cr = 5;
-        sf = 11;
-        break;
-    }
-}
-
-static inline float modemPresetToBwKHz(meshtastic_Config_LoRaConfig_ModemPreset preset, bool wideLora)
-{
-    float bwKHz = 0;
-    uint8_t sf = 0;
-    uint8_t cr = 0;
-    modemPresetToParams(preset, wideLora, bwKHz, sf, cr);
-    return bwKHz;
-}

src/mesh/NodeDB.cpp

@@ -13,7 +13,6 @@
 #include "PacketHistory.h"
 #include "PowerFSM.h"
 #include "RTC.h"
-#include "RadioInterface.h"
 #include "Router.h"
 #include "SPILock.h"
 #include "SafeFile.h"
@@ -1298,13 +1297,6 @@ void NodeDB::loadFromDisk()
             LOG_INFO("Loaded saved config version %d", config.version);
         }
     }
-
-    // Coerce LoRa config fields derived from presets while bootstrapping.
-    // Some clients/UI components display bandwidth/spread_factor directly from config even in preset mode.
-    if (config.has_lora && config.lora.use_preset) {
-        RadioInterface::bootstrapLoRaConfigFromPreset(config.lora);
-    }
-
     if (backupSecurity.private_key.size > 0) {
         LOG_DEBUG("Restoring backup of security config");
         config.security = backupSecurity;

src/mesh/RadioInterface.cpp

@@ -220,34 +220,6 @@ void initRegion()
     myRegion = r;
 }
 
-void RadioInterface::bootstrapLoRaConfigFromPreset(meshtastic_Config_LoRaConfig &loraConfig)
-{
-    if (!loraConfig.use_preset) {
-        return;
-    }
-
-    // Find region info to determine whether "wide" LoRa is permitted (2.4 GHz uses wider bandwidth codes).
-    const RegionInfo *r = regions;
-    for (; r->code != meshtastic_Config_LoRaConfig_RegionCode_UNSET && r->code != loraConfig.region; r++)
-        ;
-
-    const bool regionWideLora = r->wideLora;
-
-    float bwKHz = 0;
-    uint8_t sf = 0;
-    uint8_t cr = 0;
-    modemPresetToParams(loraConfig.modem_preset, regionWideLora, bwKHz, sf, cr);
-
-    // If selected preset requests a bandwidth larger than the region span, fall back to LONG_FAST.
-    if (r->code != meshtastic_Config_LoRaConfig_RegionCode_UNSET && (r->freqEnd - r->freqStart) < (bwKHz / 1000.0f)) {
-        loraConfig.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST;
-        modemPresetToParams(loraConfig.modem_preset, regionWideLora, bwKHz, sf, cr);
-    }
-
-    loraConfig.bandwidth = bwKHzToCode(bwKHz);
-    loraConfig.spread_factor = sf;
-}
-
 /**
  * ## LoRaWAN for North America
 
@@ -502,7 +474,54 @@ void RadioInterface::applyModemConfig()
     bool validConfig = false; // We need to check for a valid configuration
     while (!validConfig) {
         if (loraConfig.use_preset) {
-            modemPresetToParams(loraConfig.modem_preset, myRegion->wideLora, bw, sf, cr);
+
+            switch (loraConfig.modem_preset) {
+            case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO:
+                bw = (myRegion->wideLora) ? 1625.0 : 500;
+                cr = 5;
+                sf = 7;
+                break;
+            case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST:
+                bw = (myRegion->wideLora) ? 812.5 : 250;
+                cr = 5;
+                sf = 7;
+                break;
+            case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW:
+                bw = (myRegion->wideLora) ? 812.5 : 250;
+                cr = 5;
+                sf = 8;
+                break;
+            case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST:
+                bw = (myRegion->wideLora) ? 812.5 : 250;
+                cr = 5;
+                sf = 9;
+                break;
+            case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW:
+                bw = (myRegion->wideLora) ? 812.5 : 250;
+                cr = 5;
+                sf = 10;
+                break;
+            case meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO:
+                bw = (myRegion->wideLora) ? 1625.0 : 500;
+                cr = 8;
+                sf = 11;
+                break;
+            default: // Config_LoRaConfig_ModemPreset_LONG_FAST is default. Gracefully use this is preset is something illegal.
+                bw = (myRegion->wideLora) ? 812.5 : 250;
+                cr = 5;
+                sf = 11;
+                break;
+            case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
+                bw = (myRegion->wideLora) ? 406.25 : 125;
+                cr = 8;
+                sf = 11;
+                break;
+            case meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW:
+                bw = (myRegion->wideLora) ? 406.25 : 125;
+                cr = 8;
+                sf = 12;
+                break;
+            }
             if (loraConfig.coding_rate >= 5 && loraConfig.coding_rate <= 8 && loraConfig.coding_rate != cr) {
                 cr = loraConfig.coding_rate;
                 LOG_INFO("Using custom Coding Rate %u", cr);
@@ -510,7 +529,20 @@ void RadioInterface::applyModemConfig()
         } else {
             sf = loraConfig.spread_factor;
             cr = loraConfig.coding_rate;
-            bw = bwCodeToKHz(loraConfig.bandwidth);
+            bw = loraConfig.bandwidth;
+
+            if (bw == 31) // This parameter is not an integer
+                bw = 31.25;
+            if (bw == 62) // Fix for 62.5Khz bandwidth
+                bw = 62.5;
+            if (bw == 200)
+                bw = 203.125;
+            if (bw == 400)
+                bw = 406.25;
+            if (bw == 800)
+                bw = 812.5;
+            if (bw == 1600)
+                bw = 1625.0;
         }
 
         if ((myRegion->freqEnd - myRegion->freqStart) < bw / 1000) {

src/mesh/RadioInterface.h

@@ -7,9 +7,6 @@
 #include "airtime.h"
 #include "error.h"
 
-// Forward decl to avoid a direct include of generated config headers / full LoRaConfig definition in this widely-included file.
-typedef struct _meshtastic_Config_LoRaConfig meshtastic_Config_LoRaConfig;
-
 #define MAX_TX_QUEUE 16 // max number of packets which can be waiting for transmission
 
 #define MAX_LORA_PAYLOAD_LEN 255 // max length of 255 per Semtech's datasheets on SX12xx
@@ -118,12 +115,6 @@ class RadioInterface
 
     virtual ~RadioInterface() {}
 
-    /**
-     * Coerce LoRa config fields (bandwidth/spread_factor) derived from presets.
-     * This is used during early bootstrapping so UIs that display these fields directly remain consistent.
-     */
-    static void bootstrapLoRaConfigFromPreset(meshtastic_Config_LoRaConfig &loraConfig);
-
     /**
      * Return true if we think the board can go to sleep (i.e. our tx queue is empty, we are not sending or receiving)
      *

src/mesh/generated/meshtastic/admin.pb.h

@@ -77,7 +77,9 @@ typedef enum _meshtastic_AdminMessage_ModuleConfigType {
     /* TODO: REPLACE */
     meshtastic_AdminMessage_ModuleConfigType_DETECTIONSENSOR_CONFIG = 11,
     /* TODO: REPLACE */
-    meshtastic_AdminMessage_ModuleConfigType_PAXCOUNTER_CONFIG = 12
+    meshtastic_AdminMessage_ModuleConfigType_PAXCOUNTER_CONFIG = 12,
+    /* TODO: REPLACE */
+    meshtastic_AdminMessage_ModuleConfigType_STATUSMESSAGE_CONFIG = 13
 } meshtastic_AdminMessage_ModuleConfigType;
 
 typedef enum _meshtastic_AdminMessage_BackupLocation {
@@ -323,8 +325,8 @@ extern "C" {
 #define _meshtastic_AdminMessage_ConfigType_ARRAYSIZE ((meshtastic_AdminMessage_ConfigType)(meshtastic_AdminMessage_ConfigType_DEVICEUI_CONFIG+1))
 
 #define _meshtastic_AdminMessage_ModuleConfigType_MIN meshtastic_AdminMessage_ModuleConfigType_MQTT_CONFIG
-#define _meshtastic_AdminMessage_ModuleConfigType_MAX meshtastic_AdminMessage_ModuleConfigType_PAXCOUNTER_CONFIG
+#define _meshtastic_AdminMessage_ModuleConfigType_MAX meshtastic_AdminMessage_ModuleConfigType_STATUSMESSAGE_CONFIG
-#define _meshtastic_AdminMessage_ModuleConfigType_ARRAYSIZE ((meshtastic_AdminMessage_ModuleConfigType)(meshtastic_AdminMessage_ModuleConfigType_PAXCOUNTER_CONFIG+1))
+#define _meshtastic_AdminMessage_ModuleConfigType_ARRAYSIZE ((meshtastic_AdminMessage_ModuleConfigType)(meshtastic_AdminMessage_ModuleConfigType_STATUSMESSAGE_CONFIG+1))
 
 #define _meshtastic_AdminMessage_BackupLocation_MIN meshtastic_AdminMessage_BackupLocation_FLASH
 #define _meshtastic_AdminMessage_BackupLocation_MAX meshtastic_AdminMessage_BackupLocation_SD

src/mesh/generated/meshtastic/deviceonly.pb.h

@@ -361,7 +361,7 @@ extern const pb_msgdesc_t meshtastic_BackupPreferences_msg;
 /* Maximum encoded size of messages (where known) */
 /* meshtastic_NodeDatabase_size depends on runtime parameters */
 #define MESHTASTIC_MESHTASTIC_DEVICEONLY_PB_H_MAX_SIZE meshtastic_BackupPreferences_size
-#define meshtastic_BackupPreferences_size        2279
+#define meshtastic_BackupPreferences_size        2362
 #define meshtastic_ChannelFile_size              718
 #define meshtastic_DeviceState_size              1737
 #define meshtastic_NodeInfoLite_size             196

src/mesh/generated/meshtastic/localonly.pb.h

@@ -87,6 +87,9 @@ typedef struct _meshtastic_LocalModuleConfig {
     /* Paxcounter Config */
     bool has_paxcounter;
     meshtastic_ModuleConfig_PaxcounterConfig paxcounter;
+    /* StatusMessage Config */
+    bool has_statusmessage;
+    meshtastic_ModuleConfig_StatusMessageConfig statusmessage;
 } meshtastic_LocalModuleConfig;
 
 
@@ -96,9 +99,9 @@ extern "C" {
 
 /* Initializer values for message structs */
 #define meshtastic_LocalConfig_init_default      {false, meshtastic_Config_DeviceConfig_init_default, false, meshtastic_Config_PositionConfig_init_default, false, meshtastic_Config_PowerConfig_init_default, false, meshtastic_Config_NetworkConfig_init_default, false, meshtastic_Config_DisplayConfig_init_default, false, meshtastic_Config_LoRaConfig_init_default, false, meshtastic_Config_BluetoothConfig_init_default, 0, false, meshtastic_Config_SecurityConfig_init_default}
-#define meshtastic_LocalModuleConfig_init_default {false, meshtastic_ModuleConfig_MQTTConfig_init_default, false, meshtastic_ModuleConfig_SerialConfig_init_default, false, meshtastic_ModuleConfig_ExternalNotificationConfig_init_default, false, meshtastic_ModuleConfig_StoreForwardConfig_init_default, false, meshtastic_ModuleConfig_RangeTestConfig_init_default, false, meshtastic_ModuleConfig_TelemetryConfig_init_default, false, meshtastic_ModuleConfig_CannedMessageConfig_init_default, 0, false, meshtastic_ModuleConfig_AudioConfig_init_default, false, meshtastic_ModuleConfig_RemoteHardwareConfig_init_default, false, meshtastic_ModuleConfig_NeighborInfoConfig_init_default, false, meshtastic_ModuleConfig_AmbientLightingConfig_init_default, false, meshtastic_ModuleConfig_DetectionSensorConfig_init_default, false, meshtastic_ModuleConfig_PaxcounterConfig_init_default}
+#define meshtastic_LocalModuleConfig_init_default {false, meshtastic_ModuleConfig_MQTTConfig_init_default, false, meshtastic_ModuleConfig_SerialConfig_init_default, false, meshtastic_ModuleConfig_ExternalNotificationConfig_init_default, false, meshtastic_ModuleConfig_StoreForwardConfig_init_default, false, meshtastic_ModuleConfig_RangeTestConfig_init_default, false, meshtastic_ModuleConfig_TelemetryConfig_init_default, false, meshtastic_ModuleConfig_CannedMessageConfig_init_default, 0, false, meshtastic_ModuleConfig_AudioConfig_init_default, false, meshtastic_ModuleConfig_RemoteHardwareConfig_init_default, false, meshtastic_ModuleConfig_NeighborInfoConfig_init_default, false, meshtastic_ModuleConfig_AmbientLightingConfig_init_default, false, meshtastic_ModuleConfig_DetectionSensorConfig_init_default, false, meshtastic_ModuleConfig_PaxcounterConfig_init_default, false, meshtastic_ModuleConfig_StatusMessageConfig_init_default}
 #define meshtastic_LocalConfig_init_zero         {false, meshtastic_Config_DeviceConfig_init_zero, false, meshtastic_Config_PositionConfig_init_zero, false, meshtastic_Config_PowerConfig_init_zero, false, meshtastic_Config_NetworkConfig_init_zero, false, meshtastic_Config_DisplayConfig_init_zero, false, meshtastic_Config_LoRaConfig_init_zero, false, meshtastic_Config_BluetoothConfig_init_zero, 0, false, meshtastic_Config_SecurityConfig_init_zero}
-#define meshtastic_LocalModuleConfig_init_zero   {false, meshtastic_ModuleConfig_MQTTConfig_init_zero, false, meshtastic_ModuleConfig_SerialConfig_init_zero, false, meshtastic_ModuleConfig_ExternalNotificationConfig_init_zero, false, meshtastic_ModuleConfig_StoreForwardConfig_init_zero, false, meshtastic_ModuleConfig_RangeTestConfig_init_zero, false, meshtastic_ModuleConfig_TelemetryConfig_init_zero, false, meshtastic_ModuleConfig_CannedMessageConfig_init_zero, 0, false, meshtastic_ModuleConfig_AudioConfig_init_zero, false, meshtastic_ModuleConfig_RemoteHardwareConfig_init_zero, false, meshtastic_ModuleConfig_NeighborInfoConfig_init_zero, false, meshtastic_ModuleConfig_AmbientLightingConfig_init_zero, false, meshtastic_ModuleConfig_DetectionSensorConfig_init_zero, false, meshtastic_ModuleConfig_PaxcounterConfig_init_zero}
+#define meshtastic_LocalModuleConfig_init_zero   {false, meshtastic_ModuleConfig_MQTTConfig_init_zero, false, meshtastic_ModuleConfig_SerialConfig_init_zero, false, meshtastic_ModuleConfig_ExternalNotificationConfig_init_zero, false, meshtastic_ModuleConfig_StoreForwardConfig_init_zero, false, meshtastic_ModuleConfig_RangeTestConfig_init_zero, false, meshtastic_ModuleConfig_TelemetryConfig_init_zero, false, meshtastic_ModuleConfig_CannedMessageConfig_init_zero, 0, false, meshtastic_ModuleConfig_AudioConfig_init_zero, false, meshtastic_ModuleConfig_RemoteHardwareConfig_init_zero, false, meshtastic_ModuleConfig_NeighborInfoConfig_init_zero, false, meshtastic_ModuleConfig_AmbientLightingConfig_init_zero, false, meshtastic_ModuleConfig_DetectionSensorConfig_init_zero, false, meshtastic_ModuleConfig_PaxcounterConfig_init_zero, false, meshtastic_ModuleConfig_StatusMessageConfig_init_zero}
 
 /* Field tags (for use in manual encoding/decoding) */
 #define meshtastic_LocalConfig_device_tag        1
@@ -124,6 +127,7 @@ extern "C" {
 #define meshtastic_LocalModuleConfig_ambient_lighting_tag 12
 #define meshtastic_LocalModuleConfig_detection_sensor_tag 13
 #define meshtastic_LocalModuleConfig_paxcounter_tag 14
+#define meshtastic_LocalModuleConfig_statusmessage_tag 15
 
 /* Struct field encoding specification for nanopb */
 #define meshtastic_LocalConfig_FIELDLIST(X, a) \
@@ -161,7 +165,8 @@ X(a, STATIC,   OPTIONAL, MESSAGE,  remote_hardware,  10) \
 X(a, STATIC,   OPTIONAL, MESSAGE,  neighbor_info,    11) \
 X(a, STATIC,   OPTIONAL, MESSAGE,  ambient_lighting,  12) \
 X(a, STATIC,   OPTIONAL, MESSAGE,  detection_sensor,  13) \
-X(a, STATIC,   OPTIONAL, MESSAGE,  paxcounter,       14)
+X(a, STATIC,   OPTIONAL, MESSAGE,  paxcounter,       14) \
+X(a, STATIC,   OPTIONAL, MESSAGE,  statusmessage,    15)
 #define meshtastic_LocalModuleConfig_CALLBACK NULL
 #define meshtastic_LocalModuleConfig_DEFAULT NULL
 #define meshtastic_LocalModuleConfig_mqtt_MSGTYPE meshtastic_ModuleConfig_MQTTConfig
@@ -177,6 +182,7 @@ X(a, STATIC,   OPTIONAL, MESSAGE,  paxcounter,       14)
 #define meshtastic_LocalModuleConfig_ambient_lighting_MSGTYPE meshtastic_ModuleConfig_AmbientLightingConfig
 #define meshtastic_LocalModuleConfig_detection_sensor_MSGTYPE meshtastic_ModuleConfig_DetectionSensorConfig
 #define meshtastic_LocalModuleConfig_paxcounter_MSGTYPE meshtastic_ModuleConfig_PaxcounterConfig
+#define meshtastic_LocalModuleConfig_statusmessage_MSGTYPE meshtastic_ModuleConfig_StatusMessageConfig
 
 extern const pb_msgdesc_t meshtastic_LocalConfig_msg;
 extern const pb_msgdesc_t meshtastic_LocalModuleConfig_msg;
@@ -186,9 +192,9 @@ extern const pb_msgdesc_t meshtastic_LocalModuleConfig_msg;
 #define meshtastic_LocalModuleConfig_fields &meshtastic_LocalModuleConfig_msg
 
 /* Maximum encoded size of messages (where known) */
-#define MESHTASTIC_MESHTASTIC_LOCALONLY_PB_H_MAX_SIZE meshtastic_LocalConfig_size
+#define MESHTASTIC_MESHTASTIC_LOCALONLY_PB_H_MAX_SIZE meshtastic_LocalModuleConfig_size
 #define meshtastic_LocalConfig_size              749
-#define meshtastic_LocalModuleConfig_size        675
+#define meshtastic_LocalModuleConfig_size        758
 
 #ifdef __cplusplus
 } /* extern "C" */

src/modules/NodeInfoModule.cpp

@@ -2,7 +2,6 @@
 #include "Default.h"
 #include "MeshService.h"
 #include "NodeDB.h"
-#include "NodeStatus.h"
 #include "RTC.h"
 #include "Router.h"
 #include "configuration.h"
@@ -130,17 +129,14 @@ meshtastic_MeshPacket *NodeInfoModule::allocReply()
         LOG_DEBUG("Skip send NodeInfo > 40%% ch. util");
         return NULL;
     }
-
+    // If we sent our NodeInfo less than 5 min. ago, don't send it again as it may be still underway.
-    // Use graduated scaling based on active mesh size (10 minute base, scales with congestion coefficient)
+    if (!shorterTimeout && lastSentToMesh && Throttle::isWithinTimespanMs(lastSentToMesh, 5 * 60 * 1000)) {
-    uint32_t timeoutMs = Default::getConfiguredOrDefaultMsScaled(0, 10 * 60, nodeStatus->getNumOnline());
+        LOG_DEBUG("Skip send NodeInfo since we sent it <5min ago");
-    if (!shorterTimeout && lastSentToMesh && Throttle::isWithinTimespanMs(lastSentToMesh, timeoutMs)) {
-        LOG_DEBUG("Skip send NodeInfo since we sent it <%us ago", timeoutMs / 1000);
         ignoreRequest = true; // Mark it as ignored for MeshModule
         return NULL;
     } else if (shorterTimeout && lastSentToMesh && Throttle::isWithinTimespanMs(lastSentToMesh, 60 * 1000)) {
-        // For interactive/urgent requests (e.g., user-triggered or implicit requests), use a shorter 60s timeout
         LOG_DEBUG("Skip send NodeInfo since we sent it <60s ago");
-        ignoreRequest = true;
+        ignoreRequest = true; // Mark it as ignored for MeshModule
         return NULL;
     } else {
         ignoreRequest = false; // Don't ignore requests anymore

test/test_radio/test_main.cpp

@@ -1,100 +0,0 @@
-#include "MeshRadio.h"
-#include "RadioInterface.h"
-#include "TestUtil.h"
-#include <unity.h>
-
-#include "meshtastic/config.pb.h"
-
-static void test_bwCodeToKHz_specialMappings()
-{
-    TEST_ASSERT_FLOAT_WITHIN(0.0001f, 31.25f, bwCodeToKHz(31));
-    TEST_ASSERT_FLOAT_WITHIN(0.0001f, 62.5f, bwCodeToKHz(62));
-    TEST_ASSERT_FLOAT_WITHIN(0.0001f, 203.125f, bwCodeToKHz(200));
-    TEST_ASSERT_FLOAT_WITHIN(0.0001f, 406.25f, bwCodeToKHz(400));
-    TEST_ASSERT_FLOAT_WITHIN(0.0001f, 812.5f, bwCodeToKHz(800));
-    TEST_ASSERT_FLOAT_WITHIN(0.0001f, 1625.0f, bwCodeToKHz(1600));
-}
-
-static void test_bwCodeToKHz_passthrough()
-{
-    TEST_ASSERT_FLOAT_WITHIN(0.0001f, 125.0f, bwCodeToKHz(125));
-    TEST_ASSERT_FLOAT_WITHIN(0.0001f, 250.0f, bwCodeToKHz(250));
-}
-
-static void test_bootstrapLoRaConfigFromPreset_noopWhenUsePresetFalse()
-{
-    meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
-    cfg.use_preset = false;
-    cfg.region = meshtastic_Config_LoRaConfig_RegionCode_US;
-    cfg.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST;
-    cfg.bandwidth = 123;
-    cfg.spread_factor = 8;
-
-    RadioInterface::bootstrapLoRaConfigFromPreset(cfg);
-
-    TEST_ASSERT_EQUAL_UINT16(123, cfg.bandwidth);
-    TEST_ASSERT_EQUAL_UINT32(8, cfg.spread_factor);
-    TEST_ASSERT_EQUAL(meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST, cfg.modem_preset);
-}
-
-static void test_bootstrapLoRaConfigFromPreset_setsDerivedFields_nonWideRegion()
-{
-    meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
-    cfg.use_preset = true;
-    cfg.region = meshtastic_Config_LoRaConfig_RegionCode_US;
-    cfg.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST;
-
-    RadioInterface::bootstrapLoRaConfigFromPreset(cfg);
-
-    TEST_ASSERT_EQUAL_UINT16(250, cfg.bandwidth);
-    TEST_ASSERT_EQUAL_UINT32(9, cfg.spread_factor);
-}
-
-static void test_bootstrapLoRaConfigFromPreset_setsDerivedFields_wideRegion()
-{
-    meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
-    cfg.use_preset = true;
-    cfg.region = meshtastic_Config_LoRaConfig_RegionCode_LORA_24;
-    cfg.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST;
-
-    RadioInterface::bootstrapLoRaConfigFromPreset(cfg);
-
-    TEST_ASSERT_EQUAL_UINT16(800, cfg.bandwidth);
-    TEST_ASSERT_EQUAL_UINT32(9, cfg.spread_factor);
-}
-
-static void test_bootstrapLoRaConfigFromPreset_fallsBackIfBandwidthExceedsRegionSpan()
-{
-    meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
-    cfg.use_preset = true;
-    cfg.region = meshtastic_Config_LoRaConfig_RegionCode_EU_868;
-    cfg.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO;
-
-    RadioInterface::bootstrapLoRaConfigFromPreset(cfg);
-
-    TEST_ASSERT_EQUAL(meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST, cfg.modem_preset);
-    TEST_ASSERT_EQUAL_UINT16(250, cfg.bandwidth);
-    TEST_ASSERT_EQUAL_UINT32(11, cfg.spread_factor);
-}
-
-void setUp(void) {}
-void tearDown(void) {}
-
-void setup()
-{
-    delay(10);
-    delay(2000);
-
-    initializeTestEnvironment();
-
-    UNITY_BEGIN();
-    RUN_TEST(test_bwCodeToKHz_specialMappings);
-    RUN_TEST(test_bwCodeToKHz_passthrough);
-    RUN_TEST(test_bootstrapLoRaConfigFromPreset_noopWhenUsePresetFalse);
-    RUN_TEST(test_bootstrapLoRaConfigFromPreset_setsDerivedFields_nonWideRegion);
-    RUN_TEST(test_bootstrapLoRaConfigFromPreset_setsDerivedFields_wideRegion);
-    RUN_TEST(test_bootstrapLoRaConfigFromPreset_fallsBackIfBandwidthExceedsRegionSpan);
-    exit(UNITY_END());
-}
-
-void loop() {}

variants/esp32/chatter2/platformio.ini

@@ -6,8 +6,6 @@ build_flags =
   ${esp32_base.build_flags}
   -D CHATTER_2
   -I variants/esp32/chatter2
-  -DMESHTASTIC_EXCLUDE_WEBSERVER=1
-  -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
   
 lib_deps =
   ${esp32_base.lib_deps}

variants/esp32/esp32-common.ini

@@ -59,13 +59,13 @@ lib_deps =
   ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
   # renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
-  https://github.com/meshtastic/esp32_https_server/archive/b0f3960b3e8444563280656d88e22b5899481884.zip
+  https://github.com/meshtastic/esp32_https_server/archive/3223704846752e6d545139204837bdb2a55459ca.zip
   # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
   h2zero/NimBLE-Arduino@^1.4.3
   # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
   https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
   # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
-  https://github.com/lewisxhe/XPowersLib/archive/v0.3.3.zip
+  https://github.com/lewisxhe/XPowersLib/archive/v0.3.2.zip
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
   rweather/Crypto@0.4.0
 

variants/esp32/esp32.ini

@@ -17,12 +17,12 @@ lib_deps =
   ${environmental_extra_no_bsec.lib_deps}
   ${radiolib_base.lib_deps}
   # renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
-  https://github.com/meshtastic/esp32_https_server/archive/b0f3960b3e8444563280656d88e22b5899481884.zip
+  https://github.com/meshtastic/esp32_https_server/archive/3223704846752e6d545139204837bdb2a55459ca.zip
   # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
   h2zero/NimBLE-Arduino@^1.4.3
   # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
   https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
   # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
-  https://github.com/lewisxhe/XPowersLib/archive/v0.3.3.zip
+  https://github.com/lewisxhe/XPowersLib/archive/v0.3.2.zip
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
   rweather/Crypto@0.4.0

variants/esp32/m5stack_core/platformio.ini

@@ -16,8 +16,6 @@ build_flags =
   ${esp32_base.build_flags}
   -I variants/esp32/m5stack_core
   -DM5STACK
-  -DMESHTASTIC_EXCLUDE_WEBSERVER=1
-  -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
   -DUSER_SETUP_LOADED
   -DTFT_SDA_READ
   -DTFT_DRIVER=0x9341

variants/esp32/m5stack_coreink/platformio.ini

@@ -19,9 +19,9 @@ build_flags =
 lib_deps = 
   ${esp32_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.6
+  zinggjm/GxEPD2@1.6.5
   # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.4
+  lewisxhe/SensorLib@0.3.3
 lib_ignore =
   m5stack-coreink
 monitor_filters = esp32_exception_decoder

variants/esp32/tbeam/platformio.ini

@@ -32,4 +32,4 @@ lib_deps =
   # renovate: datasource=github-tags depName=meshtastic-st7796 packageName=meshtastic/st7796
   https://github.com/meshtastic/st7796/archive/1.0.5.zip
   # renovate: datasource=custom.pio depName=lewisxhe-SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.4
+  lewisxhe/SensorLib@0.3.3

variants/esp32c6/esp32c6.ini

@@ -28,7 +28,7 @@ lib_deps =
   ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
   # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
-  lewisxhe/XPowersLib@0.3.3
+  lewisxhe/XPowersLib@0.3.2
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto

variants/esp32s3/diy/my_esp32s3_diy_eink/platformio.ini

@@ -11,7 +11,7 @@ upload_speed = 921600
 lib_deps =
   ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.6
+  zinggjm/GxEPD2@1.6.5
   # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
   adafruit/Adafruit NeoPixel@1.15.2
 build_unflags =

variants/esp32s3/esp32-s3-pico/platformio.ini

@@ -23,6 +23,6 @@ build_flags = ${esp32s3_base.build_flags}
 
 lib_deps = ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.6
+  zinggjm/GxEPD2@1.6.5
   # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
   adafruit/Adafruit NeoPixel@1.15.2

variants/esp32s3/seeed_xiao_s3/variant.h

@@ -50,7 +50,6 @@ L76K GPS Module Information : https://www.seeedstudio.com/L76K-GNSS-Module-for-S
 #define GPS_RX_PIN 44
 #define GPS_TX_PIN 43
 #define HAS_GPS 1
-#define GPS_BAUDRATE 9600
 #define GPS_THREAD_INTERVAL 50
 #define PIN_SERIAL1_RX PIN_GPS_TX
 #define PIN_SERIAL1_TX PIN_GPS_RX

variants/esp32s3/t-deck-pro/platformio.ini

@@ -29,7 +29,7 @@ build_flags =
 lib_deps =
   ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.6
+  zinggjm/GxEPD2@1.6.5
   # renovate: datasource=git-refs depName=CSE_Touch packageName=https://github.com/CIRCUITSTATE/CSE_Touch gitBranch=main
   https://github.com/CIRCUITSTATE/CSE_Touch/archive/b44f23b6f870b848f1fbe453c190879bc6cfaafa.zip
   # renovate: datasource=github-tags depName=CSE_CST328 packageName=CIRCUITSTATE/CSE_CST328

variants/esp32s3/t-watch-s3/platformio.ini

@@ -24,7 +24,7 @@ lib_deps = ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
   lovyan03/LovyanGFX@1.2.7
   # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.4
+  lewisxhe/SensorLib@0.3.3
   # renovate: datasource=custom.pio depName=Adafruit DRV2605 packageName=adafruit/library/Adafruit DRV2605 Library
   adafruit/Adafruit DRV2605 Library@1.2.4
   # renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio

variants/esp32s3/tbeam-s3-core/platformio.ini

@@ -19,7 +19,7 @@ board_check = true
 lib_deps =
   ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.4
+  lewisxhe/SensorLib@0.3.3
 
 build_flags = 
   ${esp32s3_base.build_flags} 

variants/esp32s3/tlora-pager/platformio.ini

@@ -39,7 +39,7 @@ lib_deps = ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
   lewisxhe/PCF8563_Library@1.0.1
   # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.4
+  lewisxhe/SensorLib@0.3.3
   # renovate: datasource=github-tags depName=pschatzmann_arduino-audio-driver packageName=pschatzmann/arduino-audio-driver
   https://github.com/pschatzmann/arduino-audio-driver/archive/v0.2.0.zip
   # TODO renovate

variants/nrf52840/Dongle_nRF52840-pca10059-v1/platformio.ini

@@ -12,5 +12,5 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/Dongle_
 lib_deps = 
   ${nrf52840_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.6
+  zinggjm/GxEPD2@1.6.5
 debug_tool = jlink

variants/nrf52840/ELECROW-ThinkNode-M3/platformio.ini

@@ -25,4 +25,4 @@ lib_deps =
   # renovate: datasource=custom.pio depName=nRF52_PWM packageName=khoih-prog/library/nRF52_PWM
   khoih-prog/nRF52_PWM@1.0.1
   ; # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  ; lewisxhe/SensorLib@0.3.4
+  ; lewisxhe/SensorLib@0.3.3

variants/nrf52840/ELECROW-ThinkNode-M6/platformio.ini

@@ -22,4 +22,4 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ELECROW
 lib_deps =
   ${nrf52840_base.lib_deps}
   ; # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  ; lewisxhe/SensorLib@0.3.4
+  ; lewisxhe/SensorLib@0.3.3

variants/nrf52840/ELECROW-ThinkNode-M6/variant.cpp

@@ -67,8 +67,4 @@ void variant_shutdown()
     nrf_gpio_cfg_input(PIN_BUTTON1, NRF_GPIO_PIN_PULLUP); // Configure the pin to be woken up as an input
     nrf_gpio_pin_sense_t sense1 = NRF_GPIO_PIN_SENSE_LOW;
     nrf_gpio_cfg_sense_set(PIN_BUTTON1, sense1);
-
-    nrf_gpio_cfg_input(EXT_CHRG_DETECT, NRF_GPIO_PIN_PULLUP); // Configure the pin to be woken up as an input
-    nrf_gpio_pin_sense_t sense2 = NRF_GPIO_PIN_SENSE_LOW;
-    nrf_gpio_cfg_sense_set(EXT_CHRG_DETECT, sense2);
 }

variants/nrf52840/ME25LS01-4Y10TD_e-ink/platformio.ini

@@ -16,7 +16,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ME25LS0
 lib_deps = 
   ${nrf52840_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.6
+  zinggjm/GxEPD2@1.6.5
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 upload_protocol = nrfutil
 ;upload_port = /dev/ttyACM1

variants/nrf52840/MakePython_nRF52840_eink/platformio.ini

@@ -15,6 +15,6 @@ lib_deps =
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.6
+  zinggjm/GxEPD2@1.6.5
 debug_tool = jlink
 ;upload_port = /dev/ttyACM4

variants/nrf52840/TWC_mesh_v4/platformio.ini

@@ -9,5 +9,5 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/TWC_mes
 lib_deps = 
   ${nrf52840_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.6
+  zinggjm/GxEPD2@1.6.5
 debug_tool = jlink

variants/nrf52840/heltec_mesh_solar/platformio.ini

@@ -16,7 +16,7 @@ lib_deps =
   # renovate: datasource=git-refs depName=NMIoT-meshsolar packageName=https://github.com/NMIoT/meshsolar gitBranch=main
   https://github.com/NMIoT/meshsolar/archive/dfc5330dad443982e6cdd37a61d33fc7252f468b.zip
   # renovate: datasource=custom.pio depName=ArduinoJson packageName=bblanchon/library/ArduinoJson
-  bblanchon/ArduinoJson@7.4.2
+  bblanchon/ArduinoJson@6.21.5
 
 [env:heltec-mesh-solar]
 custom_meshtastic_hw_model = 108

variants/nrf52840/nano-g2-ultra/platformio.ini

@@ -20,5 +20,5 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/nano-g2
 lib_deps = 
   ${nrf52840_base.lib_deps}
   # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.4
+  lewisxhe/SensorLib@0.3.3
 ;upload_protocol = fs

variants/nrf52840/rak4631_epaper/platformio.ini

@@ -15,7 +15,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak4631
 lib_deps = 
   ${nrf52840_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.6
+  zinggjm/GxEPD2@1.6.5
   # renovate: datasource=custom.pio depName=Melopero RV3028 packageName=melopero/library/Melopero RV3028
   melopero/Melopero RV3028@1.2.0
   # renovate: datasource=custom.pio depName=RAK NCP5623 RGB LED packageName=rakwireless/library/RAKwireless NCP5623 RGB LED library

variants/nrf52840/rak4631_epaper_onrxtx/platformio.ini

@@ -17,7 +17,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak4631
 lib_deps = 
   ${nrf52840_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.6
+  zinggjm/GxEPD2@1.6.5
   # renovate: datasource=custom.pio depName=Melopero RV3028 packageName=melopero/library/Melopero RV3028
   melopero/Melopero RV3028@1.2.0
   # renovate: datasource=custom.pio depName=RAK NCP5623 RGB LED packageName=rakwireless/library/RAKwireless NCP5623 RGB LED library

variants/nrf52840/rak4631_eth_gw/platformio.ini

@@ -36,7 +36,7 @@ lib_deps =
   # renovate: datasource=git-refs depName=RAK12034-BMX160 packageName=https://github.com/RAKWireless/RAK12034-BMX160 gitBranch=main
   https://github.com/RAKWireless/RAK12034-BMX160/archive/dcead07ffa267d3c906e9ca4a1330ab989e957e2.zip
   # renovate: datasource=custom.pio depName=ArduinoJson packageName=bblanchon/library/ArduinoJson
-  bblanchon/ArduinoJson@7.4.2
+  bblanchon/ArduinoJson@6.21.5
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ; Note: as of 6/2013 the serial/bootloader based programming takes approximately 30 seconds
 ;upload_protocol = jlink

variants/nrf52840/t-echo/platformio.ini

@@ -32,7 +32,7 @@ lib_deps =
   # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
   https://github.com/meshtastic/GxEPD2/archive/a05c11c02862624266b61599b0d6ba93e33c6f24.zip
   # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.4
+  lewisxhe/SensorLib@0.3.3
 ;upload_protocol = fs
 
 [env:t-echo-inkhud]
@@ -53,4 +53,4 @@ lib_deps =
   ${inkhud.lib_deps} ; InkHUD libs first, so we get GFXRoot instead of AdafruitGFX
   ${nrf52840_base.lib_deps}
   # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.4
+  lewisxhe/SensorLib@0.3.3

variants/stm32/russell/platformio.ini

@@ -0,0 +1,21 @@
+; Russell is a board designed to mount on an ER34615/IFR32700 cell and go Up! on a balloon
+; Hardware repository: https://github.com/Meshtastic-Malaysia/russell
+; - RAK3172 STM32WLE5CCU6 MCU + integrated SX1262 LoRa
+; - CDtop CD-PA1010D GPS
+; - Bosch Sensortec BME280 sensor
+; - Consonance CN3158 LiFePO4 solar charger
+[env:russell]
+extends = stm32_base
+board = wiscore_rak3172
+board_level = extra
+board_upload.maximum_size = 233472 ; reserve the last 28KB for filesystem
+build_flags =
+  ${stm32_base.build_flags}
+  -Ivariants/stm32/russell
+  -DPRIVATE_HW
+lib_deps =
+  ${stm32_base.lib_deps}
+	# renovate: datasource=custom.pio depName=Adafruit BME280 packageName=adafruit/library/Adafruit BME280 Library
+	adafruit/Adafruit BME280 Library@2.3.0
+
+upload_port = stlink

variants/stm32/russell/rfswitch.h

@@ -0,0 +1,7 @@
+// Pins from https://forum.rakwireless.com/t/rak3172-internal-schematic/4557/2
+// PB8, PC13
+
+static const RADIOLIB_PIN_TYPE rfswitch_pins[5] = {PB8, PC13, RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC};
+
+static const Module::RfSwitchMode_t rfswitch_table[4] = {
+    {STM32WLx::MODE_IDLE, {LOW, LOW}}, {STM32WLx::MODE_RX, {HIGH, LOW}}, {STM32WLx::MODE_TX_HP, {LOW, HIGH}}, END_OF_MODE_TABLE};

variants/stm32/russell/variant.h

@@ -0,0 +1,41 @@
+#ifndef _VARIANT_RUSSELL_
+#define _VARIANT_RUSSELL_
+
+#define USE_STM32WLx
+
+// I/O
+#define LED_PIN PA0 // Red LED
+#define LED_STATE_ON 1
+#define BUTTON_PIN PH3 // Shared with BOOT0
+#define BUTTON_NEED_PULLUP
+// Charger IC charge/standby pins are open-drain with no hardware pull-up:
+// Internal pull-up is needed on STM32 (TODO)
+// #define EXT_CHRG_DETECT PA5
+// #define EXT_PWR_DETECT PA4
+
+// Bosch Sensortec BME280
+#define HAS_SENSOR 1
+
+// CDtop CD-PA1010D
+#define ENABLE_HWSERIAL1
+#define PIN_SERIAL1_RX PB7
+#define PIN_SERIAL1_TX PB6
+#define HAS_GPS 1
+#define PIN_GPS_STANDBY PA15
+#define GPS_RX_PIN PB7
+#define GPS_TX_PIN PB6
+
+// LoRa
+/*
+ * RAK3172   (-20–85°C) -> No TCXO
+ * RAK3172-T (-40–85°C) -> 3.0V TCXO
+ * https://github.com/RAKWireless/RAK-STM32-RUI/blob/e5a28be8fab1a492bd9223dd425ca33a8a297d90/variants/WisDuo_RAK3172-T_Board/radio_conf.h#L91
+ */
+#define TCXO_OPTIONAL
+#define SX126X_DIO3_TCXO_VOLTAGE 3.0
+
+// Required to avoid Serial1 conflicts due to board definition here:
+// https://github.com/stm32duino/Arduino_Core_STM32/blob/main/variants/STM32WLxx/WL54CCU_WL55CCU_WLE4C(8-B-C)U_WLE5C(8-B-C)U/variant_RAK3172_MODULE.h
+#define RAK3172
+
+#endif