Increase duration of chirp sound in playChirp

.clusterfuzzlite/Dockerfile

@@ -20,7 +20,7 @@ ENV PIP_ROOT_USER_ACTION=ignore
 RUN apt-get update && apt-get install --no-install-recommends -y \
         cmake git zip libgpiod-dev libbluetooth-dev libi2c-dev \
         libunistring-dev libmicrohttpd-dev libgnutls28-dev libgcrypt20-dev \
-        libusb-1.0-0-dev libssl-dev pkg-config libsqlite3-dev && \
+        libusb-1.0-0-dev libssl-dev pkg-config && \
     apt-get clean && rm -rf /var/lib/apt/lists/* && \
     pip install --no-cache-dir -U \
         platformio==6.1.16 \

.github/copilot-instructions.md

@@ -1,314 +0,0 @@
-# Meshtastic Firmware - Copilot Instructions
-
-This document provides context and guidelines for AI assistants working with the Meshtastic firmware codebase.
-
-## Project Overview
-
-Meshtastic is an open-source LoRa mesh networking project for long-range, low-power communication without relying on internet or cellular infrastructure. The firmware enables text messaging, location sharing, and telemetry over a decentralized mesh network.
-
-### Supported Hardware Platforms
-
-- **ESP32** (ESP32, ESP32-S3, ESP32-C3) - Most common platform
-- **nRF52** (nRF52840, nRF52833) - Low power Nordic chips
-- **RP2040/RP2350** - Raspberry Pi Pico variants
-- **STM32WL** - STM32 with integrated LoRa
-- **Linux/Portduino** - Native Linux builds (Raspberry Pi, etc.)
-
-### Supported Radio Chips
-
-- **SX1262/SX1268** - Sub-GHz LoRa (868/915 MHz regions)
-- **SX1280** - 2.4 GHz LoRa
-- **LR1110/LR1120/LR1121** - Wideband radios (sub-GHz and 2.4 GHz capable, but not simultaneously)
-- **RF95** - Legacy RFM95 modules
-- **LLCC68** - Low-cost LoRa
-
-### MQTT Integration
-
-MQTT provides a bridge between Meshtastic mesh networks and the internet, enabling nodes with network connectivity to share messages with remote meshes or external services.
-
-#### Key Components
-
-- **`src/mqtt/MQTT.cpp`** - Main MQTT client singleton, handles connection and message routing
-- **`src/mqtt/ServiceEnvelope.cpp`** - Protobuf wrapper for mesh packets sent over MQTT
-- **`moduleConfig.mqtt`** - MQTT module configuration
-
-#### MQTT Topic Structure
-
-Messages are published/subscribed using a hierarchical topic format:
-
-```
-{root}/{channel_id}/{gateway_id}
-```
-
-- `root` - Configurable prefix (default: `msh`)
-- `channel_id` - Channel name/identifier
-- `gateway_id` - Node ID of the publishing gateway
-
-#### Configuration Defaults (from `Default.h`)
-
-```cpp
-#define default_mqtt_address "mqtt.meshtastic.org"
-#define default_mqtt_username "meshdev"
-#define default_mqtt_password "large4cats"
-#define default_mqtt_root "msh"
-#define default_mqtt_encryption_enabled true
-#define default_mqtt_tls_enabled false
-```
-
-#### Key Concepts
-
-- **Uplink** - Mesh packets sent TO the MQTT broker (controlled by `uplink_enabled` per channel)
-- **Downlink** - MQTT messages received and injected INTO the mesh (controlled by `downlink_enabled` per channel)
-- **Encryption** - When `encryption_enabled` is true, only encrypted packets are sent; plaintext JSON is disabled
-- **ServiceEnvelope** - Protobuf wrapper containing packet + channel_id + gateway_id for routing
-- **JSON Support** - Optional JSON encoding for integration with external systems (disabled on nRF52 by default)
-
-#### PKI Messages
-
-PKI (Public Key Infrastructure) messages have special handling:
-
-- Accepted on a special "PKI" channel
-- Allow encrypted DMs between nodes that discovered each other on downlink-enabled channels
-
-## Project Structure
-
-```
-firmware/
-├── src/                    # Main source code
-│   ├── main.cpp           # Application entry point
-│   ├── mesh/              # Core mesh networking
-│   │   ├── NodeDB.*       # Node database management
-│   │   ├── Router.*       # Packet routing
-│   │   ├── Channels.*     # Channel management
-│   │   ├── *Interface.*   # Radio interface implementations
-│   │   └── generated/     # Protobuf generated code
-│   ├── modules/           # Feature modules (Position, Telemetry, etc.)
-│   ├── gps/               # GPS handling
-│   ├── graphics/          # Display drivers and UI
-│   ├── platform/          # Platform-specific code
-│   ├── input/             # Input device handling
-│   └── concurrency/       # Threading utilities
-├── variants/              # Hardware variant definitions
-│   ├── esp32/            # ESP32 variants
-│   ├── esp32s3/          # ESP32-S3 variants
-│   ├── nrf52/            # nRF52 variants
-│   └── rp2xxx/           # RP2040/RP2350 variants
-├── protobufs/            # Protocol buffer definitions
-├── boards/               # Custom PlatformIO board definitions
-└── bin/                  # Build and utility scripts
-```
-
-## Coding Conventions
-
-### General Style
-
-- Follow existing code style - run `trunk fmt` before commits
-- Prefer `LOG_DEBUG`, `LOG_INFO`, `LOG_WARN`, `LOG_ERROR` for logging
-- Use `assert()` for invariants that should never fail
-
-### Naming Conventions
-
-- Classes: `PascalCase` (e.g., `PositionModule`, `NodeDB`)
-- Functions/Methods: `camelCase` (e.g., `sendOurPosition`, `getNodeNum`)
-- Constants/Defines: `UPPER_SNAKE_CASE` (e.g., `MAX_INTERVAL`, `ONE_DAY`)
-- Member variables: `camelCase` (e.g., `lastGpsSend`, `nodeDB`)
-- Config defines: `USERPREFS_*` for user-configurable options
-
-### Key Patterns
-
-#### Module System
-
-Modules inherit from `MeshModule` or `ProtobufModule<T>` and implement:
-
-- `handleReceivedProtobuf()` - Process incoming packets
-- `allocReply()` - Generate response packets
-- `runOnce()` - Periodic task execution (returns next run interval in ms)
-
-```cpp
-class MyModule : public ProtobufModule<meshtastic_MyMessage>
-{
-  protected:
-    virtual bool handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshtastic_MyMessage *msg) override;
-    virtual int32_t runOnce() override;
-};
-```
-
-#### Configuration Access
-
-- `config.*` - Device configuration (LoRa, position, power, etc.)
-- `moduleConfig.*` - Module-specific configuration
-- `channels.*` - Channel configuration and management
-
-#### Default Values
-
-Use the `Default` class helpers in `src/mesh/Default.h`:
-
-- `Default::getConfiguredOrDefaultMs(configured, default)` - Returns ms, using default if configured is 0
-- `Default::getConfiguredOrMinimumValue(configured, min)` - Enforces minimum values
-- `Default::getConfiguredOrDefaultMsScaled(configured, default, numNodes)` - Scales based on network size
-
-#### Thread Safety
-
-- Use `concurrency::Lock` for mutex protection
-- Radio SPI access uses `SPILock`
-- Prefer `OSThread` for background tasks
-
-### Hardware Variants
-
-Each hardware variant has:
-
-- `variant.h` - Pin definitions and hardware capabilities
-- `platformio.ini` - Build configuration
-- Optional: `pins_arduino.h`, `rfswitch.h`
-
-Key defines in variant.h:
-
-```cpp
-#define USE_SX1262          // Radio chip selection
-#define HAS_GPS 1           // Hardware capabilities
-#define LORA_CS 36          // Pin assignments
-#define SX126X_DIO1 14      // Radio-specific pins
-```
-
-### Protobuf Messages
-
-- Defined in `protobufs/meshtastic/*.proto`
-- Generated code in `src/mesh/generated/`
-- Regenerate with `bin/regen-protos.sh`
-- Message types prefixed with `meshtastic_`
-
-### Conditional Compilation
-
-```cpp
-#if !MESHTASTIC_EXCLUDE_GPS        // Feature exclusion
-#ifdef ARCH_ESP32                   // Architecture-specific
-#if defined(USE_SX1262)            // Radio-specific
-#ifdef HAS_SCREEN                   // Hardware capability
-#if USERPREFS_EVENT_MODE           // User preferences
-```
-
-## Build System
-
-Uses **PlatformIO** with custom scripts:
-
-- `bin/platformio-pre.py` - Pre-build script
-- `bin/platformio-custom.py` - Custom build logic
-
-Build commands:
-
-```bash
-pio run -e tbeam              # Build specific target
-pio run -e tbeam -t upload    # Build and upload
-pio run -e native             # Build native/Linux version
-```
-
-## Common Tasks
-
-### Adding a New Module
-
-1. Create `src/modules/MyModule.cpp` and `.h`
-2. Inherit from appropriate base class
-3. Register in `src/modules/Modules.cpp`
-4. Add protobuf messages if needed in `protobufs/`
-
-### Adding a New Hardware Variant
-
-1. Create directory under `variants/<arch>/<name>/`
-2. Add `variant.h` with pin definitions
-3. Add `platformio.ini` with build config
-4. Reference common configs with `extends`
-
-### Modifying Configuration Defaults
-
-- Check `src/mesh/Default.h` for default value defines
-- Check `src/mesh/NodeDB.cpp` for initialization logic
-- Consider `isDefaultChannel()` checks for public channel restrictions
-
-## Important Considerations
-
-### Traffic Management
-
-The mesh network has limited bandwidth. When modifying broadcast intervals:
-
-- Respect minimum intervals on default/public channels
-- Use `Default::getConfiguredOrMinimumValue()` to enforce minimums
-- Consider `numOnlineNodes` scaling for congestion control
-
-### Power Management
-
-Many devices are battery-powered:
-
-- Use `IF_ROUTER(routerVal, normalVal)` for role-based defaults
-- Check `config.power.is_power_saving` for power-saving modes
-- Implement proper `sleep()` methods in radio interfaces
-
-### Channel Security
-
-- `channels.isDefaultChannel(index)` - Check if using default/public settings
-- Default channels get stricter rate limits to prevent abuse
-- Private channels may have relaxed limits
-
-## GitHub Actions CI/CD
-
-The project uses GitHub Actions extensively for CI/CD. Key workflows are in `.github/workflows/`:
-
-### Core CI Workflows
-
-- **`main_matrix.yml`** - Main CI pipeline, runs on push to `master`/`develop` and PRs
-  - Uses `bin/generate_ci_matrix.py` to dynamically generate build targets
-  - Builds all supported hardware variants
-  - PRs build a subset (`--level pr`) for faster feedback
-
-- **`trunk_check.yml`** - Code quality checks on PRs
-  - Runs Trunk.io for linting and formatting
-  - Must pass before merge
-
-- **`tests.yml`** - End-to-end and hardware tests
-  - Runs daily on schedule
-  - Includes native tests and hardware-in-the-loop testing
-
-- **`test_native.yml`** - Native platform unit tests
-  - Runs `pio test -e native`
-
-### Release Workflows
-
-- **`release_channels.yml`** - Triggered on GitHub release publish
-  - Builds Docker images
-  - Packages for PPA (Ubuntu), OBS (openSUSE), and COPR (Fedora)
-  - Handles Alpha/Beta/Stable release channels
-
-- **`nightly.yml`** - Nightly builds from develop branch
-
-- **`docker_build.yml`** / **`docker_manifest.yml`** - Docker image builds
-
-### Build Matrix Generation
-
-The CI uses `bin/generate_ci_matrix.py` to dynamically select which targets to build:
-
-```bash
-# Generate full build matrix
-./bin/generate_ci_matrix.py all
-
-# Generate PR-level matrix (subset for faster builds)
-./bin/generate_ci_matrix.py all --level pr
-```
-
-Variants can specify their support level in `platformio.ini`:
-
-- `custom_meshtastic_support_level = 1` - Actively supported, built on every PR
-- `custom_meshtastic_support_level = 2` - Supported, built on merge to main branches
-- `board_level = extra` - Extra builds, only on full releases
-
-### Running Workflows Locally
-
-Most workflows can be triggered manually via `workflow_dispatch` for testing.
-
-## Testing
-
-- Unit tests in `test/` directory
-- Run with `pio test -e native`
-- Use `bin/test-simulator.sh` for simulation testing
-
-## Resources
-
-- [Documentation](https://meshtastic.org/docs/)

.github/workflows/build_firmware.yml

@@ -29,6 +29,23 @@ jobs:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
+      - name: Set OTA firmware source and target
+        if: startsWith(inputs.platform, 'esp32')
+        id: ota_dir
+        env:
+          PIO_PLATFORM: ${{ inputs.platform }}
+        run: |
+          if [ "$PIO_PLATFORM" = "esp32s3" ]; then
+            echo "src=firmware-s3.bin" >> $GITHUB_OUTPUT
+            echo "tgt=release/bleota-s3.bin" >> $GITHUB_OUTPUT
+          elif [ "$PIO_PLATFORM" = "esp32c3" ] || [ "$PIO_PLATFORM" = "esp32c6" ]; then
+            echo "src=firmware-c3.bin" >> $GITHUB_OUTPUT
+            echo "tgt=release/bleota-c3.bin" >> $GITHUB_OUTPUT
+          elif [ "$PIO_PLATFORM" = "esp32" ]; then
+            echo "src=firmware.bin" >> $GITHUB_OUTPUT
+            echo "tgt=release/bleota.bin" >> $GITHUB_OUTPUT
+          fi
+
       - name: Build ${{ inputs.platform }}
         id: build
         uses: meshtastic/gh-action-firmware@main
@@ -36,66 +53,8 @@ jobs:
           pio_platform: ${{ inputs.platform }}
           pio_env: ${{ inputs.pio_env }}
           pio_target: build
-
-      - name: ESP32 - Download Unified OTA firmware
-        # Currently only esp32 and esp32s3 use the unified ota
-        if: inputs.platform == 'esp32' || inputs.platform == 'esp32s3'
-        id: dl-ota-unified
-        env:
-          PIO_PLATFORM: ${{ inputs.platform }}
-          PIO_ENV: ${{ inputs.pio_env }}
-          OTA_URL: https://github.com/meshtastic/esp32-unified-ota/releases/latest/download/mt-${{ inputs.platform }}-ota.bin
-        working-directory: release
-        run: |
-          curl -L -o "mt-$PIO_PLATFORM-ota.bin" $OTA_URL
-
-      - name: ESP32-C* - Download BLE-Only OTA firmware
-        if: inputs.platform == 'esp32c3' || inputs.platform == 'esp32c6'
-        id: dl-ota-ble
-        env:
-          PIO_ENV: ${{ inputs.pio_env }}
-          OTA_URL: https://github.com/meshtastic/firmware-ota/releases/latest/download/firmware-c3.bin
-        working-directory: release
-        run: |
-          curl -L -o bleota-c3.bin $OTA_URL
-
-      - name: Update manifest with OTA file
-        if: inputs.platform == 'esp32' || inputs.platform == 'esp32s3' || inputs.platform == 'esp32c3' || inputs.platform == 'esp32c6'
-        working-directory: release
-        env:
-          PIO_PLATFORM: ${{ inputs.platform }}
-        run: |
-          # Determine OTA filename based on platform
-          if [[ "$PIO_PLATFORM" == "esp32" || "$PIO_PLATFORM" == "esp32s3" ]]; then
-            OTA_FILE="mt-${PIO_PLATFORM}-ota.bin"
-          else
-            OTA_FILE="bleota-c3.bin"
-          fi
-
-          # Check if OTA file exists
-          if [[ ! -f "$OTA_FILE" ]]; then
-            echo "OTA file $OTA_FILE not found, skipping manifest update"
-            exit 0
-          fi
-
-          # Calculate MD5 and size
-          if command -v md5sum &> /dev/null; then
-            OTA_MD5=$(md5sum "$OTA_FILE" | cut -d' ' -f1)
-          else
-            OTA_MD5=$(md5 -q "$OTA_FILE")
-          fi
-          OTA_SIZE=$(stat -f%z "$OTA_FILE" 2>/dev/null || stat -c%s "$OTA_FILE")
-
-          # Find and update manifest file
-          for manifest in firmware-*.mt.json; do
-            if [[ -f "$manifest" ]]; then
-              echo "Updating $manifest with $OTA_FILE (md5: $OTA_MD5, size: $OTA_SIZE)"
-              # Add OTA entry to files array if not already present
-              jq --arg name "$OTA_FILE" --arg md5 "$OTA_MD5" --argjson bytes "$OTA_SIZE" --arg part "app1" \
-                'if .files | map(select(.name == $name)) | length == 0 then .files += [{"name": $name, "md5": $md5, "bytes": $bytes, "part_name": $part}] else . end' \
-                "$manifest" > "${manifest}.tmp" && mv "${manifest}.tmp" "$manifest"
-            fi
-          done
+          ota_firmware_source: ${{ steps.ota_dir.outputs.src || '' }}
+          ota_firmware_target: ${{ steps.ota_dir.outputs.tgt || '' }}
 
       - name: Job summary
         env:

.github/workflows/main_matrix.yml

@@ -201,7 +201,6 @@ jobs:
             ./device-*.bat
             ./littlefs-*.bin
             ./bleota*bin
-            ./mt-*-ota.bin
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
@@ -294,24 +293,6 @@ jobs:
     steps:
       - name: Checkout
         uses: actions/checkout@v6
-        with:
-          fetch-depth: 0
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - name: Generate release notes
-        id: release_notes
-        run: |
-          chmod +x ./bin/generate_release_notes.py
-          NOTES=$(./bin/generate_release_notes.py ${{ needs.version.outputs.long }})
-          echo "notes<<EOF" >> $GITHUB_OUTPUT
-          echo "$NOTES" >> $GITHUB_OUTPUT
-          echo "EOF" >> $GITHUB_OUTPUT
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
       - name: Create release
         uses: softprops/action-gh-release@v2
@@ -321,7 +302,8 @@ jobs:
           prerelease: true
           name: Meshtastic Firmware ${{ needs.version.outputs.long }} Alpha
           tag_name: v${{ needs.version.outputs.long }}
-          body: ${{ steps.release_notes.outputs.notes }}
+          body: |
+            Autogenerated by github action, developer should edit as required before publishing...
 
       - name: Download source deb
         uses: actions/download-artifact@v7
@@ -445,8 +427,6 @@ jobs:
     steps:
       - name: Checkout
         uses: actions/checkout@v6
-        with:
-          fetch-depth: 0
 
       - name: Setup Python
         uses: actions/setup-python@v6
@@ -466,13 +446,6 @@ jobs:
           pattern: manifest-${{ needs.version.outputs.long }}
           path: ./publish
 
-      - name: Generate release notes
-        run: |
-          chmod +x ./bin/generate_release_notes.py
-          ./bin/generate_release_notes.py ${{ needs.version.outputs.long }} > ./publish/release_notes.md
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
       - name: Publish firmware to meshtastic.github.io
         uses: peaceiris/actions-gh-pages@v4
         env:

.github/workflows/release_channels.yml

@@ -48,37 +48,6 @@ jobs:
         ${{ contains(github.event.release.name, 'Beta') && 'beta' || contains(github.event.release.name, 'Alpha') && 'alpha' }}
     secrets: inherit
 
-  publish-release-notes:
-    if: github.event.action == 'published'
-    runs-on: ubuntu-latest
-    steps:
-      - name: Get release version
-        id: version
-        run: |
-          # Extract version from tag (e.g., v2.7.15.567b8ea -> 2.7.15.567b8ea)
-          VERSION=${GITHUB_REF#refs/tags/v}
-          echo "version=$VERSION" >> $GITHUB_OUTPUT
-
-      - name: Get release notes
-        run: |
-          mkdir -p ./publish
-          gh release view ${{ github.event.release.tag_name }} --json body --jq '.body' > ./publish/release_notes.md
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Publish release notes to meshtastic.github.io
-        uses: peaceiris/actions-gh-pages@v4
-        with:
-          deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
-          external_repository: meshtastic/meshtastic.github.io
-          publish_branch: master
-          publish_dir: ./publish
-          destination_dir: firmware-${{ steps.version.outputs.version }}
-          user_name: github-actions[bot]
-          user_email: github-actions[bot]@users.noreply.github.com
-          commit_message: Release notes for ${{ steps.version.outputs.version }}
-          enable_jekyll: true
-
   # Create a PR to bump version when a release is Published
   bump-version:
     if: github.event.action == 'published'

.github/workflows/test_native.yml

@@ -143,7 +143,7 @@ jobs:
           merge-multiple: true
 
       - name: Test Report
-        uses: dorny/test-reporter@v2.5.0
+        uses: dorny/test-reporter@v2.4.0
         with:
           name: PlatformIO Tests
           path: testreport.xml

.github/workflows/trunk_format_pr.yml

@@ -0,0 +1,51 @@
+name: Run Trunk Fmt on PR Comment
+
+on:
+  issue_comment:
+    types: [created]
+
+permissions: read-all
+
+jobs:
+  trunk-fmt:
+    if: github.event.issue.pull_request != null && contains(github.event.comment.body, 'trunk fmt')
+    runs-on: ubuntu-latest
+    permissions:
+      contents: write
+      pull-requests: write
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@v6
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Install trunk
+        run: curl https://get.trunk.io -fsSL | bash
+
+      - name: Run Trunk Fmt
+        run: trunk fmt
+
+      - name: Get release version string
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Commit and push changes
+        run: |
+          git config --global user.name "github-actions[bot]"
+          git config --global user.email "github-actions[bot]@users.noreply.github.com"
+          git add .
+          git commit -m "Add firmware version ${{ steps.version.outputs.long }}"
+          git push
+
+      - name: Comment on PR
+        uses: actions/github-script@v8
+        with:
+          github-token: ${{ secrets.GITHUB_TOKEN }}
+          script: |
+            github.issues.createComment({
+              issue_number: context.issue.number,
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              body: '`trunk fmt` has been run on this PR.'
+            })

.gitignore

@@ -48,5 +48,5 @@ arduino-lib-builder*
 dependencies.lock
 idf_component.yml
 CMakeLists.txt
-/sdkconfig.*
+sdkconfig.*
 .dummy/*

.trunk/trunk.yaml

@@ -8,25 +8,25 @@ plugins:
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.497
-    - renovate@42.84.2
-    - prettier@3.8.0
-    - trufflehog@3.92.5
-    - yamllint@1.38.0
-    - bandit@1.9.3
+    - checkov@3.2.496
+    - renovate@42.66.14
+    - prettier@3.7.4
+    - trufflehog@3.92.4
+    - yamllint@1.37.1
+    - bandit@1.9.2
     - trivy@0.68.2
     - taplo@0.10.0
-    - ruff@0.14.13
+    - ruff@0.14.10
     - isort@7.0.0
     - markdownlint@0.47.0
     - oxipng@10.0.0
     - svgo@4.0.0
-    - actionlint@1.7.10
+    - actionlint@1.7.9
     - flake8@7.3.0
     - hadolint@2.14.0
     - shfmt@3.6.0
     - shellcheck@0.11.0
-    - black@26.1.0
+    - black@25.12.0
     - git-diff-check
     - gitleaks@8.30.0
     - clang-format@16.0.3

Dockerfile

@@ -14,7 +14,7 @@ RUN apt-get update && apt-get install --no-install-recommends -y \
         curl wget g++ zip git ca-certificates pkg-config \
         libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev libuv1-dev \
         libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev \
-        libx11-dev libinput-dev libxkbcommon-x11-dev libsqlite3-dev \
+        libx11-dev libinput-dev libxkbcommon-x11-dev \
     && apt-get clean && rm -rf /var/lib/apt/lists/* \
     && pip install --no-cache-dir -U platformio \
     && mkdir /tmp/firmware

alpine.Dockerfile

@@ -11,7 +11,7 @@ RUN apk --no-cache add \
         bash g++ libstdc++-dev linux-headers zip git ca-certificates libbsd-dev \
         libgpiod-dev yaml-cpp-dev bluez-dev \
         libusb-dev i2c-tools-dev libuv-dev openssl-dev pkgconf argp-standalone \
-        libx11-dev libinput-dev libxkbcommon-dev sqlite-dev \
+        libx11-dev libinput-dev libxkbcommon-dev \
     && rm -rf /var/cache/apk/* \
     && pip install --no-cache-dir -U platformio \
     && mkdir /tmp/firmware

bin/config-dist.yaml

@@ -105,8 +105,6 @@ Lora:
 
 GPS:
 #  SerialPath: /dev/ttyS0
-#  ExtraPins:
-#    - 22
 
 ### Specify I2C device, or leave blank for none
 

bin/config.d/lora-hat-rak-6421-pi-hat.yaml

@@ -1,11 +0,0 @@
-Lora:
-
-  ### RAK13300in Slot 1
-  Module: sx1262
-  IRQ: 22 #IO6
-  Reset: 16 # IO4
-  Busy: 24 # IO5
-  # Ant_sw: 13 # IO3 
-  DIO3_TCXO_VOLTAGE: true
-  DIO2_AS_RF_SWITCH: true
-  spidev: spidev0.0

bin/config.d/lora-usb-umesh-1262.yaml

@@ -1,15 +0,0 @@
-Lora:
-  Module: sx1262
-  CS: 0
-  IRQ: 6
-  Reset: 1
-  Busy: 4
-  RXen: 2
-  DIO2_AS_RF_SWITCH: true
-  spidev: ch341
-  USB_PID: 0x5512
-  USB_VID: 0x1A86
-  DIO3_TCXO_VOLTAGE: true
-#  USB_Serialnum: 12345678
-  SX126X_MAX_POWER: 30
-# Reduce output power to improve EMI

bin/config.d/lora-usb-umesh-1268.yaml

@@ -1,15 +0,0 @@
-Lora:
-  Module: sx1268
-  CS: 0
-  IRQ: 6
-  Reset: 1
-  Busy: 4
-  RXen: 2
-  DIO2_AS_RF_SWITCH: true
-  spidev: ch341
-  USB_PID: 0x5512
-  USB_VID: 0x1A86
-  DIO3_TCXO_VOLTAGE: true
-#  USB_Serialnum: 12345678
-  SX126X_MAX_POWER: 30
-# Reduce output power to improve EMI

bin/device-install.sh

@@ -32,19 +32,6 @@ if ! command -v jq >/dev/null 2>&1; then
     exit 1
 fi
 
-# esptool v5 supports commands with dashes and deprecates commands with
-# underscores. Prior versions only support commands with underscores
-if ${ESPTOOL_CMD} | grep --quiet write-flash
-then
-    ESPTOOL_WRITE_FLASH=write-flash
-    ESPTOOL_ERASE_FLASH=erase-flash
-    ESPTOOL_READ_FLASH_STATUS=read-flash-status
-else
-    ESPTOOL_WRITE_FLASH=write_flash
-    ESPTOOL_ERASE_FLASH=erase_flash
-    ESPTOOL_READ_FLASH_STATUS=read_flash_status
-fi
-
 set -e
 
 # Usage info
@@ -96,8 +83,8 @@ while [ $# -gt 0 ]; do
 done
 
 if [[ $BPS_RESET == true ]]; then
-    $ESPTOOL_CMD --baud $RESET_BAUD --after no_reset ${ESPTOOL_READ_FLASH_STATUS}
-    exit 0
+	$ESPTOOL_CMD --baud $RESET_BAUD --after no_reset read_flash_status
+	exit 0
 fi
 
 [ -z "$FILENAME" ] && [ -n "$1" ] && {
@@ -157,12 +144,12 @@ if [[ -f "$FILENAME" && "$FILENAME" == *.factory.bin ]]; then
     fi
 
     echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
-    $ESPTOOL_CMD ${ESPTOOL_ERASE_FLASH}
-    $ESPTOOL_CMD ${ESPTOOL_WRITE_FLASH} $FIRMWARE_OFFSET "${FILENAME}"
+    $ESPTOOL_CMD erase-flash
+    $ESPTOOL_CMD write-flash $FIRMWARE_OFFSET "${FILENAME}"
     echo "Trying to flash ${OTAFILE} at offset ${OTA_OFFSET}"
-    $ESPTOOL_CMD ${ESPTOOL_WRITE_FLASH} $OTA_OFFSET "${OTAFILE}"
+    $ESPTOOL_CMD write_flash $OTA_OFFSET "${OTAFILE}"
     echo "Trying to flash ${SPIFFSFILE}, at offset ${OFFSET}"
-    $ESPTOOL_CMD ${ESPTOOL_WRITE_FLASH} $OFFSET "${SPIFFSFILE}"
+    $ESPTOOL_CMD write_flash $OFFSET "${SPIFFSFILE}"
 
 else
     show_help

bin/device-update.sh

@@ -20,17 +20,6 @@ else
     exit 1
 fi
 
-# esptool v5 supports commands with dashes and deprecates commands with
-# underscores. Prior versions only support commands with underscores
-if ${ESPTOOL_CMD} | grep --quiet write-flash
-then
-    ESPTOOL_WRITE_FLASH=write-flash
-    ESPTOOL_READ_FLASH_STATUS=read-flash-status
-else
-    ESPTOOL_WRITE_FLASH=write_flash
-    ESPTOOL_READ_FLASH_STATUS=read_flash_status
-fi
-
 # Usage info
 show_help() {
 cat << EOF
@@ -80,7 +69,7 @@ done
 shift "$((OPTIND-1))"
 
 if [ "$CHANGE_MODE" = true ]; then
-    $ESPTOOL_CMD --baud $RESET_BAUD --after no_reset ${ESPTOOL_READ_FLASH_STATUS}
+	$ESPTOOL_CMD --baud $RESET_BAUD --after no_reset read_flash_status
     exit 0
 fi
 
@@ -91,7 +80,7 @@ fi
 
 if [[ -f "$FILENAME" && "$FILENAME" != *.factory.bin ]]; then
     echo "Trying to flash update ${FILENAME}"
-    $ESPTOOL_CMD --baud $FLASH_BAUD ${ESPTOOL_WRITE_FLASH} $UPDATE_OFFSET "${FILENAME}"
+    $ESPTOOL_CMD --baud $FLASH_BAUD write-flash $UPDATE_OFFSET "${FILENAME}"
 else
     show_help
     echo "Invalid file: ${FILENAME}"

bin/generate_release_notes.py

@@ -1,355 +0,0 @@
-#!/usr/bin/env python3
-"""
-Generate release notes from merged PRs on develop and master branches.
-Categorizes PRs into Enhancements and Bug Fixes/Maintenance sections.
-"""
-
-import subprocess
-import re
-import json
-import sys
-from datetime import datetime
-
-
-def get_last_release_tag():
-    """Get the most recent release tag."""
-    result = subprocess.run(
-        ["git", "describe", "--tags", "--abbrev=0"],
-        capture_output=True,
-        text=True,
-        check=True,
-    )
-    return result.stdout.strip()
-
-
-def get_tag_date(tag):
-    """Get the commit date (ISO 8601) of the tag."""
-    result = subprocess.run(
-        ["git", "show", "-s", "--format=%cI", tag],
-        capture_output=True,
-        text=True,
-        check=True,
-    )
-    return result.stdout.strip()
-
-
-def get_merged_prs_since_tag(tag, branch):
-    """Get all merged PRs since the given tag on the specified branch."""
-    # Get commits since tag on the branch - look for PR numbers in parentheses
-    result = subprocess.run(
-        [
-            "git",
-            "log",
-            f"{tag}..origin/{branch}",
-            "--oneline",
-        ],
-        capture_output=True,
-        text=True,
-    )
-
-    prs = []
-    seen_pr_numbers = set()
-
-    for line in result.stdout.strip().split("\n"):
-        if not line:
-            continue
-
-        # Extract PR number from commit message - format: "Title (#1234)"
-        pr_match = re.search(r"\(#(\d+)\)", line)
-        if pr_match:
-            pr_number = pr_match.group(1)
-            if pr_number not in seen_pr_numbers:
-                seen_pr_numbers.add(pr_number)
-                prs.append(pr_number)
-
-    return prs
-
-
-def get_pr_details(pr_number):
-    """Get PR details from GitHub API via gh CLI."""
-    try:
-        result = subprocess.run(
-            [
-                "gh",
-                "pr",
-                "view",
-                pr_number,
-                "--json",
-                "title,author,labels,url",
-            ],
-            capture_output=True,
-            text=True,
-            check=True,
-        )
-        return json.loads(result.stdout)
-    except subprocess.CalledProcessError:
-        return None
-
-
-def should_exclude_pr(pr_details):
-    """Check if PR should be excluded from release notes."""
-    if not pr_details:
-        return True
-
-    title = pr_details.get("title", "").lower()
-
-    # Exclude trunk update PRs
-    if "upgrade trunk" in title or "update trunk" in title or "trunk update" in title:
-        return True
-
-    # Exclude protobuf update PRs
-    if "update protobufs" in title or "update protobuf" in title:
-        return True
-
-    # Exclude automated version bump PRs
-    if "bump release version" in title or "bump version" in title:
-        return True
-
-    return False
-
-
-def is_dependency_update(pr_details):
-    """Check if PR is a dependency/chore update."""
-    if not pr_details:
-        return False
-
-    title = pr_details.get("title", "").lower()
-    author = pr_details.get("author", {}).get("login", "").lower()
-    labels = [label.get("name", "").lower() for label in pr_details.get("labels", [])]
-
-    # Check for renovate or dependabot authors
-    if "renovate" in author or "dependabot" in author:
-        return True
-
-    # Check for chore(deps) pattern
-    if re.match(r"^chore\(deps\):", title):
-        return True
-
-    # Check for digest update patterns
-    if re.match(r".*digest to [a-f0-9]+", title, re.IGNORECASE):
-        return True
-
-    # Check for dependency-related labels
-    dependency_labels = ["dependencies", "deps", "renovate"]
-    if any(dep in label for label in labels for dep in dependency_labels):
-        return True
-
-    return False
-
-
-def is_enhancement(pr_details):
-    """Determine if PR is an enhancement based on labels and title."""
-    labels = [label.get("name", "").lower() for label in pr_details.get("labels", [])]
-
-    # Check labels first
-    enhancement_labels = ["enhancement", "feature", "feat", "new feature"]
-    for label in labels:
-        if any(enh in label for enh in enhancement_labels):
-            return True
-
-    # Check title prefixes
-    title = pr_details.get("title", "")
-    enhancement_prefixes = ["feat:", "feature:", "add:"]
-    title_lower = title.lower()
-    for prefix in enhancement_prefixes:
-        if title_lower.startswith(prefix) or f" {prefix}" in title_lower:
-            return True
-
-    return False
-
-
-def clean_title(title):
-    """Clean up PR title for release notes."""
-    # Remove common prefixes
-    prefixes_to_remove = [
-        r"^fix:\s*",
-        r"^feat:\s*",
-        r"^feature:\s*",
-        r"^bug:\s*",
-        r"^bugfix:\s*",
-        r"^chore:\s*",
-        r"^chore\([^)]+\):\s*",
-        r"^refactor:\s*",
-        r"^docs:\s*",
-        r"^ci:\s*",
-        r"^build:\s*",
-        r"^perf:\s*",
-        r"^style:\s*",
-        r"^test:\s*",
-    ]
-
-    cleaned = title
-    for prefix in prefixes_to_remove:
-        cleaned = re.sub(prefix, "", cleaned, flags=re.IGNORECASE)
-
-    # Ensure first letter is capitalized
-    if cleaned:
-        cleaned = cleaned[0].upper() + cleaned[1:]
-
-    return cleaned.strip()
-
-
-def format_pr_line(pr_details):
-    """Format a PR as a markdown bullet point."""
-    title = clean_title(pr_details.get("title", "Unknown"))
-    author = pr_details.get("author", {}).get("login", "unknown")
-    url = pr_details.get("url", "")
-
-    return f"- {title} by @{author} in {url}"
-
-
-def get_new_contributors(pr_details_list, tag, repo="meshtastic/firmware"):
-    """Find contributors who made their first merged PR before this release.
-
-    GitHub usernames do not necessarily match git commit authors, so we use the
-    GitHub search API via `gh` to see if the user has any merged PRs before the
-    tag date. This mirrors how GitHub's "Generate release notes" feature works.
-    """
-
-    bot_authors = {"github-actions", "renovate", "dependabot", "app/renovate", "app/github-actions", "app/dependabot"}
-
-    new_contributors = []
-    seen_authors = set()
-
-    try:
-        tag_date = get_tag_date(tag)
-    except subprocess.CalledProcessError:
-        print(f"Warning: Could not determine tag date for {tag}; skipping new contributor detection", file=sys.stderr)
-        return []
-
-    for pr in pr_details_list:
-        author = pr.get("author", {}).get("login", "")
-        if not author or author in seen_authors:
-            continue
-
-        # Skip bots
-        if author.lower() in bot_authors or author.startswith("app/"):
-            continue
-
-        seen_authors.add(author)
-
-        try:
-            # Search for merged PRs by this author created before the tag date
-            search_query = f"is:pr author:{author} repo:{repo} closed:<=\"{tag_date}\""
-            search = subprocess.run(
-                [
-                    "gh",
-                    "search",
-                    "issues",
-                    "--json",
-                    "number,mergedAt,createdAt",
-                    "--state",
-                    "closed",
-                    "--limit",
-                    "200",
-                    search_query,
-                ],
-                capture_output=True,
-                text=True,
-            )
-
-            if search.returncode != 0:
-                # If gh fails, be conservative and skip adding to new contributors
-                print(f"Warning: gh search failed for author {author}: {search.stderr.strip()}", file=sys.stderr)
-                continue
-
-            results = json.loads(search.stdout or "[]")
-            # If any merged PR exists before or on tag date, not a new contributor
-            had_prior_pr = any(item.get("mergedAt") for item in results)
-
-            if not had_prior_pr:
-                new_contributors.append((author, pr.get("url", "")))
-
-        except Exception as e:
-            print(f"Warning: Could not check contributor history for {author}: {e}", file=sys.stderr)
-            continue
-
-    return new_contributors
-
-
-def main():
-    if len(sys.argv) < 2:
-        print("Usage: generate_release_notes.py <new_version>", file=sys.stderr)
-        sys.exit(1)
-
-    new_version = sys.argv[1]
-
-    # Get last release tag
-    try:
-        last_tag = get_last_release_tag()
-    except subprocess.CalledProcessError:
-        print("Error: Could not find last release tag", file=sys.stderr)
-        sys.exit(1)
-
-    # Collect PRs from both branches
-    all_pr_numbers = set()
-
-    for branch in ["develop", "master"]:
-        try:
-            prs = get_merged_prs_since_tag(last_tag, branch)
-            all_pr_numbers.update(prs)
-        except Exception as e:
-            print(f"Warning: Could not get PRs from {branch}: {e}", file=sys.stderr)
-
-    # Get details for all PRs
-    enhancements = []
-    bug_fixes = []
-    dependencies = []
-    all_pr_details = []
-
-    for pr_number in sorted(all_pr_numbers, key=int):
-        details = get_pr_details(pr_number)
-        if details and not should_exclude_pr(details):
-            all_pr_details.append(details)
-            if is_dependency_update(details):
-                dependencies.append(details)
-            elif is_enhancement(details):
-                enhancements.append(details)
-            else:
-                bug_fixes.append(details)
-
-    # Generate release notes
-    output = []
-
-    if enhancements:
-        output.append("## 🚀 Enhancements\n")
-        for pr in enhancements:
-            output.append(format_pr_line(pr))
-        output.append("")
-
-    if bug_fixes:
-        output.append("## 🐛 Bug fixes and maintenance\n")
-        for pr in bug_fixes:
-            output.append(format_pr_line(pr))
-        output.append("")
-
-    if dependencies:
-        output.append("## ⚙️ Dependencies\n")
-        for pr in dependencies:
-            output.append(format_pr_line(pr))
-        output.append("")
-
-    # Find new contributors (GitHub-accurate check using merged PRs before tag date)
-    new_contributors = get_new_contributors(all_pr_details, last_tag)
-    if new_contributors:
-        output.append("## New Contributors\n")
-        for author, url in new_contributors:
-            # Find first PR URL for this contributor
-            first_pr_url = url
-            for pr in all_pr_details:
-                if pr.get("author", {}).get("login") == author:
-                    first_pr_url = pr.get("url", url)
-                    break
-            output.append(f"- @{author} made their first contribution in {first_pr_url}")
-        output.append("")
-
-    # Add full changelog link
-    output.append(
-        f"**Full Changelog**: https://github.com/meshtastic/firmware/compare/{last_tag}...v{new_version}"
-    )
-
-    print("\n".join(output))
-
-
-if __name__ == "__main__":
-    main()

bin/meshtasticd-start.sh

@@ -1,32 +0,0 @@
-#!/usr/bin/env sh
-
-INSTANCE=$1
-CONF_DIR="/etc/meshtasticd/config.d"
-VFS_DIR="/var/lib"
-
-# If no instance ID provided, start bare daemon and exit
-echo "no instance ID provided, starting bare meshtasticd service"
-if [ -z "${INSTANCE}" ]; then
-  /usr/bin/meshtasticd
-  exit 0
-fi
-
-# Make VFS dir if it does not exist
-if [ ! -d "${VFS_DIR}/meshtasticd-${INSTANCE}" ]; then
-  echo "vfs for ${INSTANCE} does not exist, creating it."
-  mkdir "${VFS_DIR}/meshtasticd-${INSTANCE}"
-fi
-
-# Abort if config for $INSTANCE does not exist
-if [ ! -f "${CONF_DIR}/config-${INSTANCE}.yaml" ]; then
-  echo "no config for ${INSTANCE} found in ${CONF_DIR}. refusing to start" >&2
-  exit 1
-fi
-
-# Start meshtasticd with instance parameters
-printf "starting meshtasticd-%s..., ${INSTANCE}"
-if /usr/bin/meshtasticd --config="${CONF_DIR}/config-${INSTANCE}.yaml" --fsdir="${VFS_DIR}/meshtasticd-${INSTANCE}"; then
-  echo "ok"
-else
-  echo "failed"
-fi

bin/meshtasticd.service

@@ -1,5 +1,5 @@
 [Unit]
-Description=Meshtastic %i Daemon
+Description=Meshtastic Native Daemon
 After=network-online.target
 StartLimitInterval=200
 StartLimitBurst=5
@@ -9,7 +9,7 @@ AmbientCapabilities=CAP_NET_BIND_SERVICE
 User=meshtasticd
 Group=meshtasticd
 Type=simple
-ExecStart=/usr/bin/meshtasticd-start.sh %i
+ExecStart=/usr/bin/meshtasticd
 Restart=always
 RestartSec=3
 

bin/native-install.sh

@@ -1,7 +1,6 @@
 #!/usr/bin/env bash
 
 cp "release/meshtasticd_linux_$(uname -m)" /usr/bin/meshtasticd
-cp "bin/meshtasticd-start.sh" /usr/bin/meshtasticd-start.sh
 mkdir -p /etc/meshtasticd
 if [[ -f "/etc/meshtasticd/config.yaml" ]]; then
 	cp bin/config-dist.yaml /etc/meshtasticd/config-upgrade.yaml

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,9 +87,6 @@
   </screenshots>
 
   <releases>
-    <release version="2.7.19" date="2026-01-22">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.19</url>
-    </release>
     <release version="2.7.18" date="2026-01-02">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.18</url>
     </release>

bin/platformio-custom.py

@@ -58,16 +58,7 @@ def manifest_gather(source, target, env):
     manifest_ran = True
     out = []
     board_platform = env.BoardConfig().get("platform")
-    board_mcu = env.BoardConfig().get("build.mcu").lower()
     needs_ota_suffix = board_platform == "nordicnrf52"
-    
-    # Mapping of bin files to their target partition names
-    # Maps the filename pattern to the partition name where it should be flashed
-    partition_map = {
-        f"{progname}.bin": "app0",              # primary application slot (app0 / OTA_0)
-        lfsbin: "spiffs",                        # filesystem image flashed to spiffs
-    }
-    
     check_paths = [
         progname,
         f"{progname}.elf",
@@ -78,9 +69,7 @@ def manifest_gather(source, target, env):
         f"{progname}.uf2",
         f"{progname}.factory.uf2",
         f"{progname}.zip",
-        lfsbin,
-        f"mt-{board_mcu}-ota.bin",
-        "bleota-c3.bin"
+        lfsbin
     ]
     for p in check_paths:
         f = env.File(env.subst(f"$BUILD_DIR/{p}"))
@@ -93,9 +82,6 @@ def manifest_gather(source, target, env):
                 "md5": f.get_content_hash(), # Returns MD5 hash
                 "bytes": f.get_size() # Returns file size in bytes
             }
-            # Add part_name if this file represents a partition that should be flashed
-            if p in partition_map:
-                d["part_name"] = partition_map[p]
             out.append(d)
             print(d)
     manifest_write(out, env)

boards/CDEBYTE_EoRa-Hub.json

@@ -1,38 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "partitions": "default.csv",
-      "memory_type": "qio_qspi"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_USB_CDC_ON_BOOT=0",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "mcu": "esp32s3",
-    "variant": "esp32s3"
-  },
-  "connectivity": ["wifi"],
-  "debug": {
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "CDEBYTE_EoRa-Hub",
-  "upload": {
-    "flash_size": "4MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 4194304,
-    "use_1200bps_touch": true,
-    "wait_for_upload_port": true,
-    "require_upload_port": true,
-    "speed": 921600
-  },
-  "url": "https://www.cdebyte.com/products/EoRa-HUB-900TB",
-  "vendor": "CDEBYTE"
-}

boards/ThinkNode-M4.json

@@ -1,53 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_ELECROW_M4 -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x4405"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"]
-    ],
-    "usb_product": "elecrow_thinknode_m4",
-    "mcu": "nrf52840",
-    "variant": "ELECROW-ThinkNode-M4",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "ELECROW ThinkNode m4",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://www.elecrow.com/thinknode-m4-power-bank-lora-device-with-meshtastic-lora-tracker-function-powered-by-nrf52840.html",
-  "vendor": "ELECROW"
-}

boards/minimesh_lite.json

@@ -1,50 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DMINIMESH_LITE -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x8029"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"]
-    ],
-    "usb_product": "Minimesh Lite",
-    "mcu": "nrf52840",
-    "variant": "dls_Minimesh_Lite",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd"
-  },
-  "frameworks": ["arduino"],
-  "name": "Minimesh Lite",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["nrfutil", "jlink", "nrfjprog", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://deeplabstudio.com",
-  "vendor": "Deeplab Studio"
-}

boards/t-beam-1w.json

@@ -1,39 +1,50 @@
 {
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "memory_type": "qio_opi"
+    "build": {
+        "arduino": {
+            "ldscript": "esp32s3_out.ld",
+            "memory_type": "qio_opi"
+        },
+        "core": "esp32",
+        "extra_flags": [
+            "-DBOARD_HAS_PSRAM",
+            "-DLILYGO_TBEAM_1W",
+            "-DARDUINO_USB_CDC_ON_BOOT=1",
+            "-DARDUINO_USB_MODE=0",
+            "-DARDUINO_RUNNING_CORE=1",
+            "-DARDUINO_EVENT_RUNNING_CORE=1"
+        ],
+        "f_cpu": "240000000L",
+        "f_flash": "80000000L",
+        "flash_mode": "qio",
+        "psram_type": "opi",
+        "hwids": [
+            [
+                "0x303A",
+                "0x1001"
+            ]
+        ],
+        "mcu": "esp32s3",
+        "variant": "t-beam-1w"
     },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DLILYGO_TBEAM_1W",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    "connectivity": [
+        "wifi",
+        "bluetooth",
+        "lora"
     ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "psram_type": "opi",
-    "hwids": [["0x303A", "0x1001"]],
-    "mcu": "esp32s3",
-    "variant": "t-beam-1w"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino"],
-  "name": "LilyGo TBeam-1W",
-  "upload": {
-    "flash_size": "16MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 16777216,
-    "require_upload_port": true,
-    "speed": 921600
-  },
-  "url": "http://www.lilygo.cn/",
-  "vendor": "LilyGo"
+    "debug": {
+        "openocd_target": "esp32s3.cfg"
+    },
+    "frameworks": [
+        "arduino"
+    ],
+    "name": "LilyGo TBeam-1W",
+    "upload": {
+        "flash_size": "16MB",
+        "maximum_ram_size": 327680,
+        "maximum_size": 16777216,
+        "require_upload_port": true,
+        "speed": 921600
+    },
+    "url": "http://www.lilygo.cn/",
+    "vendor": "LilyGo"
 }

boards/t-watch-s3.json

@@ -9,7 +9,7 @@
       "-DBOARD_HAS_PSRAM",
       "-DT_WATCH_S3",
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_USB_MODE=0",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],

debian/changelog

@@ -1,9 +1,3 @@
-meshtasticd (2.7.19.0) unstable; urgency=medium
-
-  * Version 2.7.19
-
- -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Thu, 22 Jan 2026 22:17:40 +0000
-
 meshtasticd (2.7.18.0) unstable; urgency=medium
 
   * Version 2.7.18

debian/control

@@ -25,8 +25,7 @@ Build-Depends: debhelper-compat (= 13),
                liborcania-dev,
                libx11-dev,
                libinput-dev,
-               libxkbcommon-x11-dev,
-               libsqlite3-dev
+               libxkbcommon-x11-dev
 Standards-Version: 4.6.2
 Homepage: https://github.com/meshtastic/firmware
 Rules-Requires-Root: no

debian/meshtasticd.install

@@ -4,6 +4,5 @@ bin/config.yaml                    etc/meshtasticd
 bin/config.d/*                     etc/meshtasticd/available.d
 
 bin/meshtasticd.service            lib/systemd/system
-bin/meshtasticd-start.sh           usr/bin
 
 web/*                              usr/share/meshtasticd/web

meshtasticd.spec.rpkg

@@ -39,7 +39,6 @@ BuildRequires: pkgconfig(bluez)
 BuildRequires: pkgconfig(libusb-1.0)
 BuildRequires: libi2c-devel
 BuildRequires: pkgconfig(libuv)
-BuildRequires: pkgconfig(sqlite3)
 # Web components:
 BuildRequires: pkgconfig(openssl)
 BuildRequires: pkgconfig(liborcania)
@@ -96,9 +95,6 @@ cp -r bin/config.d/* %{buildroot}%{_sysconfdir}/meshtasticd/available.d
 # Install systemd service
 install -D -m 0644 bin/meshtasticd.service %{buildroot}%{_unitdir}/meshtasticd.service
 
-# Install meshtasticd start wrapper
-install -D -m 0755 bin/meshtasticd-start.sh %{buildroot}%{_bindir}/meshtasticd-start.sh
-
 # Install the web files under /usr/share/meshtasticd/web
 mkdir -p %{buildroot}%{_datadir}/meshtasticd/web
 cp -r web/* %{buildroot}%{_datadir}/meshtasticd/web

monitor/filter_c3_exception_decoder.py

@@ -43,11 +43,13 @@ class Esp32C3ExceptionDecoder(DeviceMonitorFilterBase):
         self.enabled = self.setup_paths()
 
         if self.config.get("env:" + self.environment, "build_type") != "debug":
-            print("""
+            print(
+                """
 Please build project in debug configuration to get more details about an exception.
 See https://docs.platformio.org/page/projectconf/build_configurations.html
 
-""")
+"""
+            )
 
         return self
 

platformio.ini

@@ -54,7 +54,6 @@ build_flags = -Wno-missing-field-initializers
 	-DMESHTASTIC_EXCLUDE_HEALTH_TELEMETRY=1
 	-DMESHTASTIC_EXCLUDE_POWERSTRESS=1 ; exclude power stress test module from main firmware
 	-DMESHTASTIC_EXCLUDE_GENERIC_THREAD_MODULE=1
-	-DMESHTASTIC_EXCLUDE_POWERMON=1
 	-D MAX_THREADS=40 ; As we've split modules, we have more threads to manage
 	#-DBUILD_EPOCH=$UNIX_TIME ; set in platformio-custom.py now
 	#-D OLED_PL=1
@@ -114,12 +113,13 @@ lib_deps =
 [radiolib_base]
 lib_deps =
 	# renovate: datasource=custom.pio depName=RadioLib packageName=jgromes/library/RadioLib
-	jgromes/RadioLib@7.5.0
+	# jgromes/RadioLib@7.4.0
+	https://github.com/jgromes/RadioLib/archive/536c7267362e2c1345be7054ba45e503252975ff.zip
 
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/37ad715b76cd6ca4aa500a4a4d9740e3cdf3e3cb.zip
+	https://github.com/meshtastic/device-ui/archive/a8e2f947f7abaf0c5ac8e6dd189a22156335beaa.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
@@ -129,7 +129,7 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit Unified Sensor packageName=adafruit/library/Adafruit Unified Sensor
 	adafruit/Adafruit Unified Sensor@1.1.15
 	# renovate: datasource=custom.pio depName=Adafruit BMP280 packageName=adafruit/library/Adafruit BMP280 Library
-	adafruit/Adafruit BMP280 Library@3.0.0
+	adafruit/Adafruit BMP280 Library@2.6.8
 	# renovate: datasource=custom.pio depName=Adafruit BMP085 packageName=adafruit/library/Adafruit BMP085 Library
 	adafruit/Adafruit BMP085 Library@1.2.4
 	# renovate: datasource=custom.pio depName=Adafruit BME280 packageName=adafruit/library/Adafruit BME280 Library
@@ -142,6 +142,8 @@ lib_deps =
 	adafruit/Adafruit INA260 Library@1.5.3
 	# renovate: datasource=custom.pio depName=Adafruit INA219 packageName=adafruit/library/Adafruit INA219
 	adafruit/Adafruit INA219@1.2.3
+	# renovate: datasource=custom.pio depName=Adafruit PM25 AQI Sensor packageName=adafruit/library/Adafruit PM25 AQI Sensor
+	adafruit/Adafruit PM25 AQI Sensor@2.0.0
 	# renovate: datasource=custom.pio depName=Adafruit MPU6050 packageName=adafruit/library/Adafruit MPU6050
 	adafruit/Adafruit MPU6050@2.2.6
 	# renovate: datasource=custom.pio depName=Adafruit LIS3DH packageName=adafruit/library/Adafruit LIS3DH
@@ -165,7 +167,7 @@ lib_deps =
 	# renovate: datasource=git-refs depName=DFRobot_RainfallSensor packageName=https://github.com/DFRobot/DFRobot_RainfallSensor gitBranch=master
 	https://github.com/DFRobot/DFRobot_RainfallSensor/archive/38fea5e02b40a5430be6dab39a99a6f6347d667e.zip
 	# renovate: datasource=custom.pio depName=INA226 packageName=robtillaart/library/INA226
-	robtillaart/INA226@0.6.6
+	robtillaart/INA226@0.6.5
 	# renovate: datasource=custom.pio depName=SparkFun MAX3010x packageName=sparkfun/library/SparkFun MAX3010x Pulse and Proximity Sensor Library
 	sparkfun/SparkFun MAX3010x Pulse and Proximity Sensor Library@1.1.2
 	# renovate: datasource=custom.pio depName=SparkFun 9DoF IMU Breakout ICM 20948 packageName=sparkfun/library/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library
@@ -212,30 +214,3 @@ lib_deps =
 	sensirion/Sensirion Core@0.7.2
 	# renovate: datasource=custom.pio depName=Sensirion I2C SCD4x packageName=sensirion/library/Sensirion I2C SCD4x
 	sensirion/Sensirion I2C SCD4x@1.1.0
-; Same as environmental_extra but without BSEC (saves ~3.5KB DRAM for original ESP32 targets)
-[environmental_extra_no_bsec]
-lib_deps =
-	# renovate: datasource=custom.pio depName=Adafruit BMP3XX packageName=adafruit/library/Adafruit BMP3XX Library
-	adafruit/Adafruit BMP3XX Library@2.1.6
-	# renovate: datasource=custom.pio depName=Adafruit MAX1704X packageName=adafruit/library/Adafruit MAX1704X
-	adafruit/Adafruit MAX1704X@1.0.3
-	# renovate: datasource=custom.pio depName=Adafruit SHTC3 packageName=adafruit/library/Adafruit SHTC3 Library
-	adafruit/Adafruit SHTC3 Library@1.0.2
-	# renovate: datasource=custom.pio depName=Adafruit LPS2X packageName=adafruit/library/Adafruit LPS2X
-	adafruit/Adafruit LPS2X@2.0.6
-	# renovate: datasource=custom.pio depName=Adafruit SHT31 packageName=adafruit/library/Adafruit SHT31 Library
-	adafruit/Adafruit SHT31 Library@2.2.2
-	# renovate: datasource=custom.pio depName=Adafruit VEML7700 packageName=adafruit/library/Adafruit VEML7700 Library
-	adafruit/Adafruit VEML7700 Library@2.1.6
-	# renovate: datasource=custom.pio depName=Adafruit SHT4x packageName=adafruit/library/Adafruit SHT4x Library
-	adafruit/Adafruit SHT4x Library@1.0.5
-	# renovate: datasource=custom.pio depName=SparkFun Qwiic Scale NAU7802 packageName=sparkfun/library/SparkFun Qwiic Scale NAU7802 Arduino Library
-	sparkfun/SparkFun Qwiic Scale NAU7802 Arduino Library@1.0.6
-	# renovate: datasource=custom.pio depName=ClosedCube OPT3001 packageName=closedcube/library/ClosedCube OPT3001
-	closedcube/ClosedCube OPT3001@1.1.2
-	# renovate: datasource=git-refs depName=meshtastic-DFRobot_LarkWeatherStation packageName=https://github.com/meshtastic/DFRobot_LarkWeatherStation gitBranch=master
-	https://github.com/meshtastic/DFRobot_LarkWeatherStation/archive/4de3a9cadef0f6a5220a8a906cf9775b02b0040d.zip
-	# renovate: datasource=custom.pio depName=Sensirion Core packageName=sensirion/library/Sensirion Core
-	sensirion/Sensirion Core@0.7.2
-	# renovate: datasource=custom.pio depName=Sensirion I2C SCD4x packageName=sensirion/library/Sensirion I2C SCD4x
-	sensirion/Sensirion I2C SCD4x@1.1.0

src/DebugConfiguration.cpp

@@ -41,8 +41,7 @@ extern "C" void logLegacy(const char *level, const char *fmt, ...)
 }
 
 #if HAS_NETWORKING
-namespace meshtastic
-{
+
 Syslog::Syslog(UDP &client)
 {
     this->_client = &client;
@@ -196,6 +195,4 @@ inline bool Syslog::_sendLog(uint16_t pri, const char *appName, const char *mess
     return true;
 }
 
-}; // namespace meshtastic
-
 #endif

src/DebugConfiguration.h

@@ -162,8 +162,6 @@ extern "C" void logLegacy(const char *level, const char *fmt, ...);
 
 #if HAS_NETWORKING
 
-namespace meshtastic
-{
 class Syslog
 {
   private:
@@ -197,6 +195,4 @@ class Syslog
     bool vlogf(uint16_t pri, const char *appName, const char *fmt, va_list args) __attribute__((format(printf, 3, 0)));
 };
 
-}; // namespace meshtastic
-
 #endif // HAS_NETWORKING

src/MessageStore.cpp

@@ -13,11 +13,6 @@
 #define MESSAGE_TEXT_POOL_SIZE (MAX_MESSAGES_SAVED * MAX_MESSAGE_SIZE)
 #endif
 
-// Default autosave interval 2 hours, override per device later with -DMESSAGE_AUTOSAVE_INTERVAL_SEC=300 (etc)
-#ifndef MESSAGE_AUTOSAVE_INTERVAL_SEC
-#define MESSAGE_AUTOSAVE_INTERVAL_SEC (2 * 60 * 60)
-#endif
-
 // Global message text pool and state
 static char *g_messagePool = nullptr;
 static size_t g_poolWritePos = 0;
@@ -107,60 +102,6 @@ void MessageStore::addLiveMessage(const StoredMessage &msg)
     pushWithLimit(liveMessages, msg);
 }
 
-#if ENABLE_MESSAGE_PERSISTENCE
-static bool g_messageStoreHasUnsavedChanges = false;
-static uint32_t g_lastAutoSaveMs = 0; // last time we actually saved
-
-static inline uint32_t autosaveIntervalMs()
-{
-    uint32_t sec = (uint32_t)MESSAGE_AUTOSAVE_INTERVAL_SEC;
-    if (sec < 60)
-        sec = 60;
-    return sec * 1000UL;
-}
-
-static inline bool reachedMs(uint32_t now, uint32_t target)
-{
-    return (int32_t)(now - target) >= 0;
-}
-
-// Mark new messages in RAM that need to be saved later
-static inline void markMessageStoreUnsaved()
-{
-    g_messageStoreHasUnsavedChanges = true;
-
-    if (g_lastAutoSaveMs == 0) {
-        g_lastAutoSaveMs = millis();
-    }
-}
-
-// Called periodically from the main loop in main.cpp
-static inline void autosaveTick(MessageStore *store)
-{
-    if (!store)
-        return;
-
-    uint32_t now = millis();
-
-    if (g_lastAutoSaveMs == 0) {
-        g_lastAutoSaveMs = now;
-        return;
-    }
-
-    if (!reachedMs(now, g_lastAutoSaveMs + autosaveIntervalMs()))
-        return;
-
-    // Autosave interval reached, only save if there are unsaved messages.
-    if (g_messageStoreHasUnsavedChanges) {
-        LOG_INFO("Autosaving MessageStore to flash");
-        store->saveToFlash();
-    } else {
-        LOG_INFO("Autosave skipped, no changes to save");
-        g_lastAutoSaveMs = now;
-    }
-}
-#endif
-
 // Add from incoming/outgoing packet
 const StoredMessage &MessageStore::addFromPacket(const meshtastic_MeshPacket &packet)
 {
@@ -190,11 +131,6 @@ const StoredMessage &MessageStore::addFromPacket(const meshtastic_MeshPacket &pa
     }
 
     addLiveMessage(sm);
-
-#if ENABLE_MESSAGE_PERSISTENCE
-    markMessageStoreUnsaved();
-#endif
-
     return liveMessages.back();
 }
 
@@ -219,10 +155,6 @@ void MessageStore::addFromString(uint32_t sender, uint8_t channelIndex, const st
     sm.ackStatus = AckStatus::NONE;
 
     addLiveMessage(sm);
-
-#if ENABLE_MESSAGE_PERSISTENCE
-    markMessageStoreUnsaved();
-#endif
 }
 
 #if ENABLE_MESSAGE_PERSISTENCE
@@ -307,10 +239,6 @@ void MessageStore::saveToFlash()
 
     f.close();
 #endif
-
-    // Reset autosave state after any save
-    g_messageStoreHasUnsavedChanges = false;
-    g_lastAutoSaveMs = millis();
 }
 
 void MessageStore::loadFromFlash()
@@ -342,9 +270,6 @@ void MessageStore::loadFromFlash()
 
     f.close();
 #endif
-    // Loading messages does not trigger an autosave
-    g_messageStoreHasUnsavedChanges = false;
-    g_lastAutoSaveMs = millis();
 }
 
 #else
@@ -365,11 +290,6 @@ void MessageStore::clearAllMessages()
     f.write(&count, 1); // write "0 messages"
     f.close();
 #endif
-
-#if ENABLE_MESSAGE_PERSISTENCE
-    g_messageStoreHasUnsavedChanges = false;
-    g_lastAutoSaveMs = millis();
-#endif
 }
 
 // Internal helper: erase first or last message matching a predicate
@@ -501,14 +421,6 @@ uint16_t MessageStore::storeText(const char *src, size_t len)
     return storeTextInPool(src, len);
 }
 
-#if ENABLE_MESSAGE_PERSISTENCE
-void messageStoreAutosaveTick()
-{
-    // Called from the main loop to check autosave timing
-    autosaveTick(&messageStore);
-}
-#endif
-
 // Global definition
 MessageStore messageStore("default");
 #endif

src/MessageStore.h

@@ -125,11 +125,6 @@ class MessageStore
     std::string filename;                   // Flash filename for persistence
 };
 
-#if ENABLE_MESSAGE_PERSISTENCE
-// Called periodically from main loop to trigger time based autosave
-void messageStoreAutosaveTick();
-#endif
-
 // Global instance (defined in MessageStore.cpp)
 extern MessageStore messageStore;
 

src/Power.cpp

@@ -1,14 +1,11 @@
 /**
  * @file Power.cpp
- * @brief This file contains the implementation of the Power class, which is
- * responsible for managing power-related functionality of the device. It
- * includes battery level sensing, power management unit (PMU) control, and
- * power state machine management. The Power class is used by the main device
- * class to manage power-related functionality.
+ * @brief This file contains the implementation of the Power class, which is responsible for managing power-related functionality
+ * of the device. It includes battery level sensing, power management unit (PMU) control, and power state machine management. The
+ * Power class is used by the main device class to manage power-related functionality.
  *
- * The file also includes implementations of various battery level sensors, such
- * as the AnalogBatteryLevel class, which assumes the battery voltage is
- * attached via a voltage-divider to an analog input.
+ * The file also includes implementations of various battery level sensors, such as the AnalogBatteryLevel class, which assumes
+ * the battery voltage is attached via a voltage-divider to an analog input.
  *
  * This file is part of the Meshtastic project.
  * For more information, see: https://meshtastic.org/
@@ -22,7 +19,6 @@
 #include "configuration.h"
 #include "main.h"
 #include "meshUtils.h"
-#include "power/PowerHAL.h"
 #include "sleep.h"
 
 #if defined(ARCH_PORTDUINO)
@@ -175,12 +171,22 @@ Power *power;
 
 using namespace meshtastic;
 
-// NRF52 has AREF_VOLTAGE defined in architecture.h but
-// make sure it's included. If something is wrong with NRF52
-// definition - compilation will fail on missing definition
-#if !defined(AREF_VOLTAGE) && !defined(ARCH_NRF52)
+#ifndef AREF_VOLTAGE
+#if defined(ARCH_NRF52)
+/*
+ * Internal Reference is +/-0.6V, with an adjustable gain of 1/6, 1/5, 1/4,
+ * 1/3, 1/2 or 1, meaning 3.6, 3.0, 2.4, 1.8, 1.2 or 0.6V for the ADC levels.
+ *
+ * External Reference is VDD/4, with an adjustable gain of 1, 2 or 4, meaning
+ * VDD/4, VDD/2 or VDD for the ADC levels.
+ *
+ * Default settings are internal reference with 1/6 gain (GND..3.6V ADC range)
+ */
+#define AREF_VOLTAGE 3.6
+#else
 #define AREF_VOLTAGE 3.3
 #endif
+#endif
 
 /**
  * If this board has a battery level sensor, set this to a valid implementation
@@ -227,8 +233,7 @@ static void battery_adcDisable()
 #endif
 
 /**
- * A simple battery level sensor that assumes the battery voltage is attached
- * via a voltage-divider to an analog input
+ * A simple battery level sensor that assumes the battery voltage is attached via a voltage-divider to an analog input
  */
 class AnalogBatteryLevel : public HasBatteryLevel
 {
@@ -306,8 +311,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
 
 #ifndef BATTERY_SENSE_SAMPLES
 #define BATTERY_SENSE_SAMPLES                                                                                                    \
-    15 // Set the number of samples, it has an effect of increasing sensitivity in
-       // complex electromagnetic environment.
+    15 // Set the number of samples, it has an effect of increasing sensitivity in complex electromagnetic environment.
 #endif
 
 #ifdef BATTERY_PIN
@@ -337,8 +341,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
             battery_adcDisable();
 
             if (!initial_read_done) {
-                // Flush the smoothing filter with an ADC reading, if the reading is
-                // plausibly correct
+                // Flush the smoothing filter with an ADC reading, if the reading is plausibly correct
                 if (scaled > last_read_value)
                     last_read_value = scaled;
                 initial_read_done = true;
@@ -347,8 +350,8 @@ class AnalogBatteryLevel : public HasBatteryLevel
                 last_read_value += (scaled - last_read_value) * 0.5; // Virtual LPF
             }
 
-            // LOG_DEBUG("battery gpio %d raw val=%u scaled=%u filtered=%u",
-            // BATTERY_PIN, raw, (uint32_t)(scaled), (uint32_t) (last_read_value));
+            // LOG_DEBUG("battery gpio %d raw val=%u scaled=%u filtered=%u", BATTERY_PIN, raw, (uint32_t)(scaled), (uint32_t)
+            // (last_read_value));
         }
         return last_read_value;
 #endif // BATTERY_PIN
@@ -417,8 +420,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
     /**
      * return true if there is a battery installed in this unit
      */
-    // if we have a integrated device with a battery, we can assume that the
-    // battery is always connected
+    // if we have a integrated device with a battery, we can assume that the battery is always connected
 #ifdef BATTERY_IMMUTABLE
     virtual bool isBatteryConnect() override { return true; }
 #elif defined(ADC_V)
@@ -439,10 +441,10 @@ class AnalogBatteryLevel : public HasBatteryLevel
     virtual bool isBatteryConnect() override { return getBatteryPercent() != -1; }
 #endif
 
-    /// If we see a battery voltage higher than physics allows - assume charger is
-    /// pumping in power On some boards we don't have the power management chip
-    /// (like AXPxxxx) so we use EXT_PWR_DETECT GPIO pin to detect external power
-    /// source
+    /// If we see a battery voltage higher than physics allows - assume charger is pumping
+    /// in power
+    /// On some boards we don't have the power management chip (like AXPxxxx)
+    /// so we use EXT_PWR_DETECT GPIO pin to detect external power source
     virtual bool isVbusIn() override
     {
 #ifdef EXT_PWR_DETECT
@@ -459,12 +461,8 @@ class AnalogBatteryLevel : public HasBatteryLevel
         }
         // if it's not HIGH - check the battery
 #endif
-
-// technically speaking this should work for all(?) NRF52 boards
-// but needs testing across multiple devices. NRF52 USB would not even work if
-// VBUS was not properly connected and detected by the CPU
-#elif defined(MUZI_BASE) || defined(PROMICRO_DIY_TCXO)
-        return powerHAL_isVBUSConnected();
+#elif defined(MUZI_BASE)
+        return NRF_POWER->USBREGSTATUS & POWER_USBREGSTATUS_VBUSDETECT_Msk;
 #endif
         return getBattVoltage() > chargingVolt;
     }
@@ -478,18 +476,15 @@ class AnalogBatteryLevel : public HasBatteryLevel
             return (rak9154Sensor.isCharging()) ? OptTrue : OptFalse;
         }
 #endif
-#if defined(ELECROW_ThinkNode_M6)
-        return digitalRead(EXT_CHRG_DETECT) == ext_chrg_detect_value || isVbusIn();
-#elif EXT_CHRG_DETECT
+#ifdef EXT_CHRG_DETECT
         return digitalRead(EXT_CHRG_DETECT) == ext_chrg_detect_value;
 #elif defined(BATTERY_CHARGING_INV)
         return !digitalRead(BATTERY_CHARGING_INV);
 #else
 #if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(DISABLE_INA_CHARGING_DETECTION)
         if (hasINA()) {
-            // get current flow from INA sensor - negative value means power flowing
-            // into the battery default assuming  BATTERY+  <--> INA_VIN+ <--> SHUNT
-            // RESISTOR <--> INA_VIN- <--> LOAD
+            // get current flow from INA sensor - negative value means power flowing into the battery
+            // default assuming  BATTERY+  <--> INA_VIN+ <--> SHUNT RESISTOR <--> INA_VIN- <--> LOAD
             LOG_DEBUG("Using INA on I2C addr 0x%x for charging detection", config.power.device_battery_ina_address);
 #if defined(INA_CHARGING_DETECTION_INVERT)
             return getINACurrent() > 0;
@@ -505,8 +500,8 @@ class AnalogBatteryLevel : public HasBatteryLevel
     }
 
   private:
-    /// If we see a battery voltage higher than physics allows - assume charger is
-    /// pumping in power
+    /// If we see a battery voltage higher than physics allows - assume charger is pumping
+    /// in power
 
     /// For heltecs with no battery connected, the measured voltage is 2204, so
     // need to be higher than that, in this case is 2500mV (3000-500)
@@ -515,8 +510,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
     const float noBatVolt = (OCV[NUM_OCV_POINTS - 1] - 500) * NUM_CELLS;
     // Start value from minimum voltage for the filter to not start from 0
     // that could trigger some events.
-    // This value is over-written by the first ADC reading, it the voltage seems
-    // reasonable.
+    // This value is over-written by the first ADC reading, it the voltage seems reasonable.
     bool initial_read_done = false;
     float last_read_value = (OCV[NUM_OCV_POINTS - 1] * NUM_CELLS);
     uint32_t last_read_time_ms = 0;
@@ -658,8 +652,7 @@ bool Power::analogInit()
 #ifdef CONFIG_IDF_TARGET_ESP32S3
     // ESP32S3
     else if (val_type == ESP_ADC_CAL_VAL_EFUSE_TP_FIT) {
-        LOG_INFO("ADC config based on Two Point values and fitting curve "
-                 "coefficients stored in eFuse");
+        LOG_INFO("ADC config based on Two Point values and fitting curve coefficients stored in eFuse");
     }
 #endif
     else {
@@ -667,7 +660,13 @@ bool Power::analogInit()
     }
 #endif // ARCH_ESP32
 
-    // NRF52 ADC init moved to powerHAL_init in nrf52 platform
+#ifdef ARCH_NRF52
+#ifdef VBAT_AR_INTERNAL
+    analogReference(VBAT_AR_INTERNAL);
+#else
+    analogReference(AR_INTERNAL); // 3.6V
+#endif
+#endif // ARCH_NRF52
 
 #ifndef ARCH_ESP32
     analogReadResolution(BATTERY_SENSE_RESOLUTION_BITS);
@@ -694,8 +693,6 @@ bool Power::setup()
         found = true;
     } else if (lipoChargerInit()) {
         found = true;
-    } else if (serialBatteryInit()) {
-        found = true;
     } else if (meshSolarInit()) {
         found = true;
     } else if (analogInit()) {
@@ -722,16 +719,6 @@ bool Power::setup()
             runASAP = true;
         },
         CHANGE);
-#endif
-#ifdef EXT_CHRG_DETECT
-    attachInterrupt(
-        EXT_CHRG_DETECT,
-        []() {
-            power->setIntervalFromNow(0);
-            runASAP = true;
-            BaseType_t higherWake = 0;
-        },
-        CHANGE);
 #endif
     enabled = found;
     low_voltage_counter = 0;
@@ -778,8 +765,7 @@ void Power::reboot()
     HAL_NVIC_SystemReset();
 #else
     rebootAtMsec = -1;
-    LOG_WARN("FIXME implement reboot for this platform. Note that some settings "
-             "require a restart to be applied");
+    LOG_WARN("FIXME implement reboot for this platform. Note that some settings require a restart to be applied");
 #endif
 }
 
@@ -789,12 +775,9 @@ void Power::shutdown()
 #if HAS_SCREEN
     if (screen) {
 #ifdef T_DECK_PRO
-        screen->showSimpleBanner("Device is powered off.\nConnect USB to start!",
-                                 0); // T-Deck Pro has no power button
+        screen->showSimpleBanner("Device is powered off.\nConnect USB to start!", 0); // T-Deck Pro has no power button
 #elif defined(USE_EINK)
-        screen->showSimpleBanner("Shutting Down...",
-                                 2250); // dismiss after 3 seconds to avoid the
-                                        // banner on the sleep screen
+        screen->showSimpleBanner("Shutting Down...", 2250); // dismiss after 3 seconds to avoid the banner on the sleep screen
 #else
         screen->showSimpleBanner("Shutting Down...", 0); // stays on screen
 #endif
@@ -833,8 +816,7 @@ void Power::readPowerStatus()
     int32_t batteryVoltageMv = -1; // Assume unknown
     int8_t batteryChargePercent = -1;
     OptionalBool usbPowered = OptUnknown;
-    OptionalBool hasBattery = OptUnknown; // These must be static because NRF_APM
-                                          // code doesn't run every time
+    OptionalBool hasBattery = OptUnknown; // These must be static because NRF_APM code doesn't run every time
     OptionalBool isChargingNow = OptUnknown;
 
     if (batteryLevel) {
@@ -847,10 +829,9 @@ void Power::readPowerStatus()
             if (batteryLevel->getBatteryPercent() >= 0) {
                 batteryChargePercent = batteryLevel->getBatteryPercent();
             } else {
-                // If the AXP192 returns a percentage less than 0, the feature is either
-                // not supported or there is an error In that case, we compute an
-                // estimate of the charge percent based on open circuit voltage table
-                // defined in power.h
+                // If the AXP192 returns a percentage less than 0, the feature is either not supported or there is an error
+                // In that case, we compute an estimate of the charge percent based on open circuit voltage table defined
+                // in power.h
                 batteryChargePercent = clamp((int)(((batteryVoltageMv - (OCV[NUM_OCV_POINTS - 1] * NUM_CELLS)) * 1e2) /
                                                    ((OCV[0] * NUM_CELLS) - (OCV[NUM_OCV_POINTS - 1] * NUM_CELLS))),
                                              0, 100);
@@ -858,12 +839,12 @@ void Power::readPowerStatus()
         }
     }
 
-// FIXME: IMO we shouldn't be littering our code with all these ifdefs.  Way
-// better instead to make a Nrf52IsUsbPowered subclass (which shares a
-// superclass with the BatteryLevel stuff) that just provides a few methods. But
-// in the interest of fixing this bug I'm going to follow current practice.
-#ifdef NRF_APM // Section of code detects USB power on the RAK4631 and updates
-               // the power states.  Takes 20 seconds or so to detect changes.
+// FIXME: IMO we shouldn't be littering our code with all these ifdefs.  Way better instead to make a Nrf52IsUsbPowered subclass
+// (which shares a superclass with the BatteryLevel stuff)
+// that just provides a few methods.  But in the interest of fixing this bug I'm going to follow current
+// practice.
+#ifdef NRF_APM // Section of code detects USB power on the RAK4631 and updates the power states.  Takes 20 seconds or so to detect
+               // changes.
 
     nrfx_power_usb_state_t nrf_usb_state = nrfx_power_usbstatus_get();
     // LOG_DEBUG("NRF Power %d", nrf_usb_state);
@@ -937,9 +918,8 @@ void Power::readPowerStatus()
 
 #endif
 
-    // If we have a battery at all and it is less than 0%, force deep sleep if we
-    // have more than 10 low readings in a row. NOTE: min LiIon/LiPo voltage
-    // is 2.0 to 2.5V, current OCV min is set to 3100 that is large enough.
+    // If we have a battery at all and it is less than 0%, force deep sleep if we have more than 10 low readings in
+    // a row. NOTE: min LiIon/LiPo voltage is 2.0 to 2.5V, current OCV min is set to 3100 that is large enough.
     //
 
     if (batteryLevel && powerStatus2.getHasBattery() && !powerStatus2.getHasUSB()) {
@@ -961,8 +941,8 @@ int32_t Power::runOnce()
     readPowerStatus();
 
 #ifdef HAS_PMU
-    // WE no longer use the IRQ line to wake the CPU (due to false wakes from
-    // sleep), but we do poll the IRQ status by reading the registers over I2C
+    // WE no longer use the IRQ line to wake the CPU (due to false wakes from sleep), but we do poll
+    // the IRQ status by reading the registers over I2C
     if (PMU) {
 
         PMU->getIrqStatus();
@@ -1004,8 +984,7 @@ int32_t Power::runOnce()
         PMU->clearIrqStatus();
     }
 #endif
-    // Only read once every 20 seconds once the power status for the app has been
-    // initialized
+    // Only read once every 20 seconds once the power status for the app has been initialized
     return (statusHandler && statusHandler->isInitialized()) ? (1000 * 20) : RUN_SAME;
 }
 
@@ -1013,12 +992,10 @@ int32_t Power::runOnce()
  * Init the power manager chip
  *
  * axp192 power
-    DCDC1 0.7-3.5V @ 1200mA max -> OLED // If you turn this off you'll lose
- comms to the axp192 because the OLED and the axp192 share the same i2c bus,
- instead use ssd1306 sleep mode DCDC2 -> unused DCDC3 0.7-3.5V @ 700mA max ->
- ESP32 (keep this on!) LDO1 30mA -> charges GPS backup battery // charges the
- tiny J13 battery by the GPS to power the GPS ram (for a couple of days), can
- not be turned off LDO2 200mA -> LORA LDO3 200mA -> GPS
+    DCDC1 0.7-3.5V @ 1200mA max -> OLED // If you turn this off you'll lose comms to the axp192 because the OLED and the
+ axp192 share the same i2c bus, instead use ssd1306 sleep mode DCDC2 -> unused DCDC3 0.7-3.5V @ 700mA max -> ESP32 (keep this
+ on!) LDO1 30mA -> charges GPS backup battery // charges the tiny J13 battery by the GPS to power the GPS ram (for a couple of
+ days), can not be turned off LDO2 200mA -> LORA LDO3 200mA -> GPS
  *
  */
 bool Power::axpChipInit()
@@ -1063,10 +1040,9 @@ bool Power::axpChipInit()
 
     if (!PMU) {
         /*
-         * In XPowersLib, if the XPowersAXPxxx object is released, Wire.end() will
-         * be called at the same time. In order not to affect other devices, if the
-         * initialization of the PMU fails, Wire needs to be re-initialized once, if
-         * there are multiple devices sharing the bus.
+         * In XPowersLib, if the XPowersAXPxxx object is released, Wire.end() will be called at the same time.
+         * In order not to affect other devices, if the initialization of the PMU fails, Wire needs to be re-initialized once,
+         * if there are multiple devices sharing the bus.
          * * */
 #ifndef PMU_USE_WIRE1
         w->begin(I2C_SDA, I2C_SCL);
@@ -1083,8 +1059,8 @@ bool Power::axpChipInit()
         PMU->enablePowerOutput(XPOWERS_LDO2);
 
         // oled module power channel,
-        // disable it will cause abnormal communication between boot and AXP power
-        // supply, do not turn it off
+        // disable it will cause abnormal communication between boot and AXP power supply,
+        // do not turn it off
         PMU->setPowerChannelVoltage(XPOWERS_DCDC1, 3300);
         // enable oled power
         PMU->enablePowerOutput(XPOWERS_DCDC1);
@@ -1111,8 +1087,7 @@ bool Power::axpChipInit()
         PMU->setChargeTargetVoltage(XPOWERS_AXP192_CHG_VOL_4V2);
     } else if (PMU->getChipModel() == XPOWERS_AXP2101) {
 
-        /*The alternative version of T-Beam 1.1 differs from T-Beam V1.1 in that it
-         * uses an AXP2101 power chip*/
+        /*The alternative version of T-Beam 1.1 differs from T-Beam V1.1 in that it uses an AXP2101 power chip*/
         if (HW_VENDOR == meshtastic_HardwareModel_TBEAM) {
             // Unuse power channel
             PMU->disablePowerOutput(XPOWERS_DCDC2);
@@ -1147,8 +1122,8 @@ bool Power::axpChipInit()
             // t-beam s3 core
             /**
              * gnss module power channel
-             * The default ALDO4 is off, you need to turn on the GNSS power first,
-             * otherwise it will be invalid during initialization
+             * The default ALDO4 is off, you need to turn on the GNSS power first, otherwise it will be invalid during
+             * initialization
              */
             PMU->setPowerChannelVoltage(XPOWERS_ALDO4, 3300);
             PMU->enablePowerOutput(XPOWERS_ALDO4);
@@ -1174,11 +1149,11 @@ bool Power::axpChipInit()
             PMU->setPowerChannelVoltage(XPOWERS_ALDO1, 3300);
             PMU->enablePowerOutput(XPOWERS_ALDO1);
 
-            // sdcard (T-Beam S3) / gnns (T-Watch S3 Plus) power channel
+            // sdcard power channel
             PMU->setPowerChannelVoltage(XPOWERS_BLDO1, 3300);
-#ifndef T_WATCH_S3
             PMU->enablePowerOutput(XPOWERS_BLDO1);
-#else
+
+#ifdef T_WATCH_S3
             // DRV2605 power channel
             PMU->setPowerChannelVoltage(XPOWERS_BLDO2, 3300);
             PMU->enablePowerOutput(XPOWERS_BLDO2);
@@ -1198,8 +1173,7 @@ bool Power::axpChipInit()
         // disable all axp chip interrupt
         PMU->disableIRQ(XPOWERS_AXP2101_ALL_IRQ);
 
-        // Set the constant current charging current of AXP2101, temporarily use
-        // 500mA by default
+        // Set the constant current charging current of AXP2101, temporarily use 500mA by default
         PMU->setChargerConstantCurr(XPOWERS_AXP2101_CHG_CUR_500MA);
 
         // Set up the charging voltage
@@ -1265,12 +1239,11 @@ bool Power::axpChipInit()
                   PMU->getPowerChannelVoltage(XPOWERS_BLDO2));
     }
 
-// We can safely ignore this approach for most (or all) boards because MCU
-// turned off earlier than battery discharged to 2.6V.
+// We can safely ignore this approach for most (or all) boards because MCU turned off
+// earlier than battery discharged to 2.6V.
 //
-// Unfortunately for now we can't use this killswitch for RAK4630-based boards
-// because they have a bug with battery voltage measurement. Probably it
-// sometimes drops to low values.
+// Unfortanly for now we can't use this killswitch for RAK4630-based boards because they have a bug with
+// battery voltage measurement. Probably it sometimes drops to low values.
 #ifndef RAK4630
     // Set PMU shutdown voltage at 2.6V to maximize battery utilization
     PMU->setSysPowerDownVoltage(2600);
@@ -1289,12 +1262,10 @@ bool Power::axpChipInit()
     attachInterrupt(
         PMU_IRQ, [] { pmu_irq = true; }, FALLING);
 
-    // we do not look for AXPXXX_CHARGING_FINISHED_IRQ & AXPXXX_CHARGING_IRQ
-    // because it occurs repeatedly while there is no battery also it could cause
-    // inadvertent waking from light sleep just because the battery filled we
-    // don't look for AXPXXX_BATT_REMOVED_IRQ because it occurs repeatedly while
-    // no battery installed we don't look at AXPXXX_VBUS_REMOVED_IRQ because we
-    // don't have anything hooked to vbus
+    // we do not look for AXPXXX_CHARGING_FINISHED_IRQ & AXPXXX_CHARGING_IRQ because it occurs repeatedly while there is
+    // no battery also it could cause inadvertent waking from light sleep just because the battery filled
+    // we don't look for AXPXXX_BATT_REMOVED_IRQ because it occurs repeatedly while no battery installed
+    // we don't look at AXPXXX_VBUS_REMOVED_IRQ because we don't have anything hooked to vbus
     PMU->enableIRQ(pmuIrqMask);
 
     PMU->clearIrqStatus();
@@ -1410,8 +1381,8 @@ class LipoCharger : public HasBatteryLevel
             bool result = PPM->init(Wire, I2C_SDA, I2C_SCL, BQ25896_ADDR);
             if (result) {
                 LOG_INFO("PPM BQ25896 init succeeded");
-                // Set the minimum operating voltage. Below this voltage, the PPM will
-                // protect PPM->setSysPowerDownVoltage(3100);
+                // Set the minimum operating voltage. Below this voltage, the PPM will protect
+                // PPM->setSysPowerDownVoltage(3100);
 
                 // Set input current limit, default is 500mA
                 // PPM->setInputCurrentLimit(800);
@@ -1434,8 +1405,7 @@ class LipoCharger : public HasBatteryLevel
                 PPM->enableMeasure();
 
                 // Turn on charging function
-                // If there is no battery connected, do not turn on the charging
-                // function
+                // If there is no battery connected, do not turn on the charging function
                 PPM->enableCharge();
             } else {
                 LOG_WARN("PPM BQ25896 init failed");
@@ -1470,8 +1440,7 @@ class LipoCharger : public HasBatteryLevel
     virtual int getBatteryPercent() override
     {
         return -1;
-        // return bq->getChargePercent(); // don't use BQ27220 for battery percent,
-        // it is not calibrated
+        // return bq->getChargePercent(); // don't use BQ27220 for battery percent, it is not calibrated
     }
 
     /**
@@ -1593,143 +1562,10 @@ bool Power::meshSolarInit()
 
 #else
 /**
- * The meshSolar battery level sensor is unavailable - default to
- * AnalogBatteryLevel
+ * The meshSolar battery level sensor is unavailable - default to AnalogBatteryLevel
  */
 bool Power::meshSolarInit()
 {
     return false;
 }
 #endif
-
-#ifdef HAS_SERIAL_BATTERY_LEVEL
-#include <SoftwareSerial.h>
-
-/**
- * SerialBatteryLevel class for pulling battery information from a secondary MCU over serial.
- */
-class SerialBatteryLevel : public HasBatteryLevel
-{
-
-  public:
-    /**
-     * Init the I2C meshSolar battery level sensor
-     */
-    bool runOnce()
-    {
-        BatterySerial.begin(4800);
-
-        return true;
-    }
-
-    /**
-     * Battery state of charge, from 0 to 100 or -1 for unknown
-     */
-    virtual int getBatteryPercent() override { return v_percent; }
-
-    /**
-     * The raw voltage of the battery in millivolts, or NAN if unknown
-     */
-    virtual uint16_t getBattVoltage() override { return voltage * 1000; }
-
-    /**
-     * return true if there is a battery installed in this unit
-     */
-    virtual bool isBatteryConnect() override
-    {
-        // definitely need to gobble up more bytes at once
-        if (BatterySerial.available() > 5) {
-            // LOG_WARN("SerialBatteryLevel: %u bytes available", BatterySerial.available());
-            while (BatterySerial.available() > 11) {
-                BatterySerial.read(); // flush old data
-            }
-            // LOG_WARN("SerialBatteryLevel: %u bytes now available", BatterySerial.available());
-            int tries = 0;
-            while (BatterySerial.read() != 0xFE) {
-                tries++; // wait for start byte
-                if (tries > 10) {
-                    LOG_WARN("SerialBatteryLevel: no start byte found");
-                    return 1;
-                }
-            }
-
-            Data[1] = BatterySerial.read();
-            Data[2] = BatterySerial.read();
-            Data[3] = BatterySerial.read();
-            Data[4] = BatterySerial.read();
-            Data[5] = BatterySerial.read();
-            if (Data[5] != 0xFD) {
-                LOG_WARN("SerialBatteryLevel: invalid end byte %02x", Data[5]);
-                return true;
-            }
-            v_percent = Data[1];
-            voltage = Data[2] + (((float)Data[3]) / 100) + (((float)Data[4]) / 10000);
-            voltage *= 2;
-            // LOG_WARN("SerialBatteryLevel: received data %u, %f, %02x", v_percent, voltage, Data[5]);
-            return true;
-        }
-        // This function runs first, so use it to grab the latest data from the secondary MCU
-        return true;
-    }
-
-    /**
-     * return true if there is an external power source detected
-     */
-    virtual bool isVbusIn() override
-    {
-#if defined(EXT_CHRG_DETECT)
-
-        return digitalRead(EXT_CHRG_DETECT) == ext_chrg_detect_value;
-
-#endif
-        return false;
-    }
-
-    virtual bool isCharging() override
-    {
-#ifdef EXT_CHRG_DETECT
-        return digitalRead(EXT_CHRG_DETECT) == ext_chrg_detect_value;
-
-#endif
-        // by default, we check the battery voltage only
-        return isVbusIn();
-    }
-
-  private:
-    SoftwareSerial BatterySerial = SoftwareSerial(SERIAL_BATTERY_RX, SERIAL_BATTERY_TX);
-    uint8_t Data[6] = {0};
-    int v_percent = 0;
-    float voltage = 0.0;
-};
-
-SerialBatteryLevel serialBatteryLevel;
-
-/**
- * Init the serial battery level sensor
- */
-bool Power::serialBatteryInit()
-{
-#ifdef EXT_PWR_DETECT
-    pinMode(EXT_PWR_DETECT, INPUT);
-#endif
-#ifdef EXT_CHRG_DETECT
-    pinMode(EXT_CHRG_DETECT, ext_chrg_detect_mode);
-#endif
-
-    bool result = serialBatteryLevel.runOnce();
-    LOG_DEBUG("Power::serialBatteryInit serial battery sensor is %s", result ? "ready" : "not ready yet");
-    if (!result)
-        return false;
-    batteryLevel = &serialBatteryLevel;
-    return true;
-}
-
-#else
-/**
- * If this device has no serial battery level sensor, don't try to use it.
- */
-bool Power::serialBatteryInit()
-{
-    return false;
-}
-#endif

src/RedirectablePrint.cpp

@@ -18,7 +18,7 @@
 #endif
 
 #if HAS_NETWORKING
-extern meshtastic::Syslog syslog;
+extern Syslog syslog;
 #endif
 void RedirectablePrint::rpInit()
 {

src/SafeFile.cpp

@@ -54,7 +54,7 @@ size_t SafeFile::write(const uint8_t *buffer, size_t size)
 }
 
 /**
- * Atomically close the file (overwriting any old version) and readback the contents to confirm the hash matches
+ * Atomically close the file (deleting any old versions) and readback the contents to confirm the hash matches
  *
  * @return false for failure
  */
@@ -73,7 +73,15 @@ bool SafeFile::close()
     if (!testReadback())
         return false;
 
-    // Rename or overwrite (atomic operation)
+    { // Scope for lock
+        concurrency::LockGuard g(spiLock);
+        // brief window of risk here ;-)
+        if (fullAtomic && FSCom.exists(filename.c_str()) && !FSCom.remove(filename.c_str())) {
+            LOG_ERROR("Can't remove old pref file");
+            return false;
+        }
+    }
+
     String filenameTmp = filename;
     filenameTmp += ".tmp";
     if (!renameFile(filenameTmp.c_str(), filename.c_str())) {

src/buzz/buzz.cpp

@@ -35,14 +35,6 @@ struct ToneDuration {
 #define NOTE_G6 1568
 #define NOTE_E7 2637
 
-#define NOTE_C4 262
-#define NOTE_E4 330
-#define NOTE_G4 392
-#define NOTE_A4 440
-#define NOTE_C5 523
-#define NOTE_E5 659
-#define NOTE_G5 784
-
 const int DURATION_1_16 = 62;  // 1/16 note
 const int DURATION_1_8 = 125;  // 1/8 note
 const int DURATION_1_4 = 250;  // 1/4 note
@@ -197,17 +189,3 @@ void playComboTune()
     };
     playTones(melody, sizeof(melody) / sizeof(ToneDuration));
 }
-
-void play4ClickDown()
-{
-    ToneDuration melody[] = {{NOTE_G5, 55}, {NOTE_E5, 55}, {NOTE_C5, 60},  {NOTE_A4, 55},  {NOTE_G4, 55},
-                             {NOTE_E4, 65}, {NOTE_C4, 80}, {NOTE_G3, 120}, {NOTE_E3, 160}, {NOTE_SILENT, 120}};
-    playTones(melody, sizeof(melody) / sizeof(ToneDuration));
-}
-
-void play4ClickUp()
-{
-    // Quick high-pitched notes with trills
-    ToneDuration melody[] = {{NOTE_F5, 50}, {NOTE_G6, 45}, {NOTE_E7, 60}};
-    playTones(melody, sizeof(melody) / sizeof(ToneDuration));
-}

src/buzz/buzz.h

@@ -7,8 +7,6 @@ void playShutdownMelody();
 void playGPSEnableBeep();
 void playGPSDisableBeep();
 void playComboTune();
-void play4ClickDown();
-void play4ClickUp();
 void playBoop();
 void playChirp();
 void playClick();

src/configuration.h

@@ -155,10 +155,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #endif
 
 // Default system gain to 0 if not defined
-#ifndef NUM_PA_POINTS
-#define NUM_PA_POINTS 1
-#endif
-
 #ifndef TX_GAIN_LORA
 #define TX_GAIN_LORA 0
 #endif
@@ -176,12 +172,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // -----------------------------------------------------------------------------
 // OLED & Input
 // -----------------------------------------------------------------------------
-#define SSD1306_ADDRESS_L 0x3C // Addr = 0
-#define SSD1306_ADDRESS_H 0x3D // Addr = 1
-
 #if defined(SEEED_WIO_TRACKER_L1) && !defined(SEEED_WIO_TRACKER_L1_EINK)
-#define SSD1306_ADDRESS SSD1306_ADDRESS_H
+#define SSD1306_ADDRESS 0x3D
 #define USE_SH1106
+#else
+#define SSD1306_ADDRESS 0x3C
 #endif
 #define ST7567_ADDRESS 0x3F
 
@@ -210,7 +205,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define INA_ADDR_WAVESHARE_UPS 0x43
 #define INA3221_ADDR 0x42
 #define MAX1704X_ADDR 0x36
-#define QMC6310U_ADDR 0x1C
+#define QMC6310_ADDR 0x1C
 #define QMI8658_ADDR 0x6B
 #define QMC5883L_ADDR 0x0D
 #define HMC5883L_ADDR 0x1E
@@ -219,7 +214,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LPS22HB_ADDR_ALT 0x5D
 #define SHT31_4x_ADDR 0x44
 #define SHT31_4x_ADDR_ALT 0x45
-#define PMSA003I_ADDR 0x12
+#define PMSA0031_ADDR 0x12
 #define QMA6100P_ADDR 0x12
 #define AHT10_ADDR 0x38
 #define RCWL9620_ADDR 0x57
@@ -449,6 +444,18 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #endif
 #endif
 
+// BME680 BSEC2 support detection
+#if !defined(MESHTASTIC_BME680_BSEC2_SUPPORTED)
+#if defined(RAK_4631) || defined(TBEAM_V10)
+
+#define MESHTASTIC_BME680_BSEC2_SUPPORTED 1
+#define MESHTASTIC_BME680_HEADER <bsec2.h>
+#else
+#define MESHTASTIC_BME680_BSEC2_SUPPORTED 0
+#define MESHTASTIC_BME680_HEADER <Adafruit_BME680.h>
+#endif // defined(RAK_4631)
+#endif // !defined(MESHTASTIC_BME680_BSEC2_SUPPORTED)
+
 // -----------------------------------------------------------------------------
 // Global switches to turn off features for a minimized build
 // -----------------------------------------------------------------------------
@@ -473,7 +480,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MESHTASTIC_EXCLUDE_AUDIO 1
 #define MESHTASTIC_EXCLUDE_DETECTIONSENSOR 1
 #define MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR 1
-#define MESHTASTIC_EXCLUDE_AIR_QUALITY_SENSOR 1
 #define MESHTASTIC_EXCLUDE_HEALTH_TELEMETRY 1
 #define MESHTASTIC_EXCLUDE_EXTERNALNOTIFICATION 1
 #define MESHTASTIC_EXCLUDE_PAXCOUNTER 1

src/detect/ScanI2C.cpp

@@ -43,7 +43,7 @@ ScanI2C::FoundDevice ScanI2C::firstAccelerometer() const
 
 ScanI2C::FoundDevice ScanI2C::firstAQI() const
 {
-    ScanI2C::DeviceType types[] = {PMSA003I, SCD4X};
+    ScanI2C::DeviceType types[] = {PMSA0031, SCD4X};
     return firstOfOrNONE(2, types);
 }
 

src/detect/ScanI2C.h

@@ -35,12 +35,11 @@ class ScanI2C
         SHT4X,
         SHTC3,
         LPS22HB,
-        QMC6310U,
-        QMC6310N,
+        QMC6310,
         QMI8658,
         QMC5883L,
         HMC5883L,
-        PMSA003I,
+        PMSA0031,
         QMA6100P,
         MPU6050,
         LIS3DH,

src/detect/ScanI2CTwoWire.cpp

@@ -63,16 +63,12 @@ ScanI2C::DeviceType ScanI2CTwoWire::probeOLED(ScanI2C::DeviceAddress addr) const
         if (i2cBus->available()) {
             r = i2cBus->read();
         }
-        if (r == 0x80) {
-            LOG_INFO("QMC6310N found at address 0x%02X", addr.address);
-            return ScanI2C::DeviceType::QMC6310N;
-        }
         r &= 0x0f;
 
         if (r == 0x08 || r == 0x00) {
             logFoundDevice("SH1106", (uint8_t)addr.address);
             o_probe = SCREEN_SH1106; // SH1106
-        } else if (r == 0x03 || r == 0x04 || r == 0x06 || r == 0x07 || r == 0x05) {
+        } else if (r == 0x03 || r == 0x04 || r == 0x06 || r == 0x07) {
             logFoundDevice("SSD1306", (uint8_t)addr.address);
             o_probe = SCREEN_SSD1306; // SSD1306
         }
@@ -110,7 +106,7 @@ uint16_t ScanI2CTwoWire::getRegisterValue(const ScanI2CTwoWire::RegisterLocation
         if (i2cBus->available())
             i2cBus->read();
     }
-    LOG_DEBUG("Register value from 0x%x: 0x%x", registerLocation.i2cAddress.address, value);
+    LOG_DEBUG("Register value: 0x%x", value);
     return value;
 }
 
@@ -179,8 +175,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
         type = NONE;
         if (err == 0) {
             switch (addr.address) {
-            case SSD1306_ADDRESS_H:
-            case SSD1306_ADDRESS_L:
+            case SSD1306_ADDRESS:
                 type = probeOLED(addr);
                 break;
 
@@ -387,11 +382,11 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 }
             case SHT31_4x_ADDR:     // same as OPT3001_ADDR_ALT
             case SHT31_4x_ADDR_ALT: // same as OPT3001_ADDR
-                if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x7E), 2) == 0x5449) {
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x7E), 2);
+                if (registerValue == 0x5449) {
                     type = OPT3001;
                     logFoundDevice("OPT3001", (uint8_t)addr.address);
-                } else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x89), 6) !=
-                           0) { // unique SHT4x serial number (6 bytes inc. CRC)
+                } else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x89), 2) != 0) { // unique SHT4x serial number
                     type = SHT4X;
                     logFoundDevice("SHT4X", (uint8_t)addr.address);
                 } else {
@@ -417,7 +412,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
 
             case LPS22HB_ADDR_ALT:
                 SCAN_SIMPLE_CASE(LPS22HB_ADDR, LPS22HB, "LPS22HB", (uint8_t)addr.address)
-                SCAN_SIMPLE_CASE(QMC6310U_ADDR, QMC6310U, "QMC6310U", (uint8_t)addr.address)
+                SCAN_SIMPLE_CASE(QMC6310_ADDR, QMC6310, "QMC6310", (uint8_t)addr.address)
 
             case QMI8658_ADDR:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0A), 1); // get ID
@@ -447,7 +442,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
 #ifdef HAS_QMA6100P
                 SCAN_SIMPLE_CASE(QMA6100P_ADDR, QMA6100P, "QMA6100P", (uint8_t)addr.address)
 #else
-                SCAN_SIMPLE_CASE(PMSA003I_ADDR, PMSA003I, "PMSA003I", (uint8_t)addr.address)
+                SCAN_SIMPLE_CASE(PMSA0031_ADDR, PMSA0031, "PMSA0031", (uint8_t)addr.address)
 #endif
             case BMA423_ADDR: // this can also be LIS3DH_ADDR_ALT
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0F), 2);

src/detect/reClockI2C.h

@@ -1,41 +0,0 @@
-#ifdef CAN_RECLOCK_I2C
-#include "ScanI2CTwoWire.h"
-
-uint32_t reClockI2C(uint32_t desiredClock, TwoWire *i2cBus)
-{
-
-    uint32_t currentClock;
-
-    /* See https://github.com/arduino/Arduino/issues/11457
-      Currently, only ESP32 can getClock()
-      While all cores can setClock()
-      https://github.com/sandeepmistry/arduino-nRF5/blob/master/libraries/Wire/Wire.h#L50
-      https://github.com/earlephilhower/arduino-pico/blob/master/libraries/Wire/src/Wire.h#L60
-      https://github.com/stm32duino/Arduino_Core_STM32/blob/main/libraries/Wire/src/Wire.h#L103
-      For cases when I2C speed is different to the ones defined by sensors (see defines in sensor classes)
-      we need to reclock I2C and set it back to the previous desired speed.
-      Only for cases where we can know OR predefine the speed, we can do this.
-    */
-
-#ifdef ARCH_ESP32
-    currentClock = i2cBus->getClock();
-#elif defined(ARCH_NRF52)
-    // TODO add getClock function or return a predefined clock speed per variant?
-    return 0;
-#elif defined(ARCH_RP2040)
-    // TODO add getClock function or return a predefined clock speed per variant
-    return 0;
-#elif defined(ARCH_STM32WL)
-    // TODO add getClock function or return a predefined clock speed per variant
-    return 0;
-#else
-    return 0;
-#endif
-
-    if (currentClock != desiredClock) {
-        LOG_DEBUG("Changing I2C clock to %u", desiredClock);
-        i2cBus->setClock(desiredClock);
-    }
-    return currentClock;
-}
-#endif

src/gps/GPS.cpp

@@ -896,11 +896,14 @@ void GPS::writePinEN(bool on)
 void GPS::writePinStandby(bool standby)
 {
 #ifdef PIN_GPS_STANDBY // Specifically the standby pin for L76B, L76K and clones
-    bool val;
-    if (standby)
-        val = GPS_STANDBY_ACTIVE;
-    else
-        val = !GPS_STANDBY_ACTIVE;
+
+// Determine the new value for the pin
+// Normally: active HIGH for awake
+#ifdef PIN_GPS_STANDBY_INVERTED
+    bool val = standby;
+#else
+    bool val = !standby;
+#endif
 
     // Write and log
     pinMode(PIN_GPS_STANDBY, OUTPUT);
@@ -931,11 +934,8 @@ void GPS::setPowerPMU(bool on)
             // t-beam v1.2 GNSS power channel
             on ? PMU->enablePowerOutput(XPOWERS_ALDO3) : PMU->disablePowerOutput(XPOWERS_ALDO3);
         } else if (HW_VENDOR == meshtastic_HardwareModel_LILYGO_TBEAM_S3_CORE) {
-            // t-beam-s3-core GNSS power channel
+            // t-beam-s3-core GNSS  power channel
             on ? PMU->enablePowerOutput(XPOWERS_ALDO4) : PMU->disablePowerOutput(XPOWERS_ALDO4);
-        } else if (HW_VENDOR == meshtastic_HardwareModel_T_WATCH_S3) {
-            // t-watch-s3-plus GNSS power channel
-            on ? PMU->enablePowerOutput(XPOWERS_BLDO1) : PMU->disablePowerOutput(XPOWERS_BLDO1);
         }
     } else if (model == XPOWERS_AXP192) {
         // t-beam v1.1 GNSS  power channel

src/gps/GPS.h

@@ -16,11 +16,6 @@
 #define GPS_EN_ACTIVE 1
 #endif
 
-// Allow defining the polarity of the STANDBY output.  default is LOW for standby
-#ifndef GPS_STANDBY_ACTIVE
-#define GPS_STANDBY_ACTIVE LOW
-#endif
-
 static constexpr uint32_t GPS_UPDATE_ALWAYS_ON_THRESHOLD_MS = 10 * 1000UL;
 static constexpr uint32_t GPS_FIX_HOLD_MAX_MS = 20000;
 

src/gps/RTC.cpp

@@ -397,7 +397,7 @@ uint32_t getValidTime(RTCQuality minQuality, bool local)
     return (currentQuality >= minQuality) ? getTime(local) : 0;
 }
 
-time_t gm_mktime(const struct tm *tm)
+time_t gm_mktime(struct tm *tm)
 {
 #if !MESHTASTIC_EXCLUDE_TZ
     time_t result = 0;
@@ -413,8 +413,8 @@ time_t gm_mktime(const struct tm *tm)
     days_before_this_year -= 719162; // (1969 * 365 + 1969 / 4 - 1969 / 100 + 1969 / 400);
 
     // Now, within this tm->year, compute the days *before* this tm->month starts.
-    static const int days_before_month[12] = {0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334}; // non-leap year
-    int days_this_year_before_this_month = days_before_month[tm->tm_mon];                             // tm->tm_mon is 0..11
+    int days_before_month[12] = {0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334}; // non-leap year
+    int days_this_year_before_this_month = days_before_month[tm->tm_mon];                // tm->tm_mon is 0..11
 
     // If this is a leap year, and we're past February, add a day:
     if (tm->tm_mon >= 2 && (year % 4) == 0 && ((year % 100) != 0 || (year % 400) == 0)) {
@@ -435,7 +435,6 @@ time_t gm_mktime(const struct tm *tm)
 
     return result;
 #else
-    struct tm tmCopy = *tm;
-    return mktime(&tmCopy);
+    return mktime(tm);
 #endif
 }

src/gps/RTC.h

@@ -54,7 +54,7 @@ uint32_t getValidTime(RTCQuality minQuality, bool local = false);
 
 RTCSetResult readFromRTC();
 
-time_t gm_mktime(const struct tm *tm);
+time_t gm_mktime(struct tm *tm);
 
 #define SEC_PER_DAY 86400
 #define SEC_PER_HOUR 3600

src/graphics/EInkDisplay2.cpp

@@ -148,7 +148,7 @@ bool EInkDisplay::connect()
 #endif
 #endif
 
-#if defined(TTGO_T_ECHO) || defined(ELECROW_ThinkNode_M1) || defined(T_ECHO_LITE) || defined(TTGO_T_ECHO_PLUS)
+#if defined(TTGO_T_ECHO) || defined(ELECROW_ThinkNode_M1) || defined(T_ECHO_LITE)
     {
         auto lowLevel = new EINK_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY, SPI1);
 

src/graphics/EInkDisplay2.h

@@ -9,15 +9,6 @@
 #include "GxEPD2Multi.h"
 #endif
 
-// Limit how often we push a full E-Ink refresh. T-Deck Pro needs faster updates for typing.
-#ifndef EINK_FORCE_DISPLAY_THROTTLE_MS
-#if defined(T_DECK_PRO)
-#define EINK_FORCE_DISPLAY_THROTTLE_MS 200
-#else
-#define EINK_FORCE_DISPLAY_THROTTLE_MS 1000
-#endif
-#endif
-
 /**
  * An adapter class that allows using the GxEPD2 library as if it was an OLEDDisplay implementation.
  *
@@ -51,7 +42,7 @@ class EInkDisplay : public OLEDDisplay
      *
      * @return true if we did draw the screen
      */
-    virtual bool forceDisplay(uint32_t msecLimit = EINK_FORCE_DISPLAY_THROTTLE_MS);
+    virtual bool forceDisplay(uint32_t msecLimit = 1000);
 
     /**
      * Run any code needed to complete an update, after the physical refresh has completed.

src/graphics/Screen.cpp

@@ -312,7 +312,6 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
 
     // Only validate the combined value once
     if (rawRGB > 0 && rawRGB <= 255255255) {
-        LOG_INFO("Setting screen RGB color to user chosen: 0x%06X", rawRGB);
         // Extract each component as a normal int first
         int r = (rawRGB >> 16) & 0xFF;
         int g = (rawRGB >> 8) & 0xFF;
@@ -320,16 +319,6 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
         if (r >= 0 && r <= 255 && g >= 0 && g <= 255 && b >= 0 && b <= 255) {
             TFT_MESH = COLOR565(static_cast<uint8_t>(r), static_cast<uint8_t>(g), static_cast<uint8_t>(b));
         }
-#ifdef TFT_MESH_OVERRIDE
-    } else if (rawRGB == 0) {
-        LOG_INFO("Setting screen RGB color to TFT_MESH_OVERRIDE: 0x%04X", TFT_MESH_OVERRIDE);
-        // Default to TFT_MESH_OVERRIDE if available
-        TFT_MESH = TFT_MESH_OVERRIDE;
-#endif
-    } else {
-        // Default best readable yellow color
-        LOG_INFO("Setting screen RGB color to default: (255,255,128)");
-        TFT_MESH = COLOR565(255, 255, 128);
     }
 
 #if defined(USE_SH1106) || defined(USE_SH1107) || defined(USE_SH1107_128_64)
@@ -825,7 +814,7 @@ int32_t Screen::runOnce()
 #endif
     }
 #endif
-    if (!NotificationRenderer::isOverlayBannerShowing() && rebootAtMsec != 0 && !suppressRebootBanner) {
+    if (!NotificationRenderer::isOverlayBannerShowing() && rebootAtMsec != 0) {
         showSimpleBanner("Rebooting...", 0);
     }
 
@@ -1440,15 +1429,10 @@ int Screen::handleStatusUpdate(const meshtastic::Status *arg)
         }
         nodeDB->updateGUI = false;
         break;
-    case STATUS_TYPE_POWER: {
-        bool currentUSB = powerStatus->getHasUSB();
-        if (currentUSB != lastPowerUSBState) {
-            lastPowerUSBState = currentUSB;
-            forceDisplay(true);
-        }
+    case STATUS_TYPE_POWER:
+        forceDisplay(true);
         break;
     }
-    }
 
     return 0;
 }

src/graphics/Screen.h

@@ -558,42 +558,6 @@ class Screen : public concurrency::OSThread
         if (ch == 0xC2 || ch == 0xC3 || ch == 0xC4 || ch == 0xC5)
             return (uint8_t)0;
 
-#endif
-
-#if defined(OLED_GR)
-
-        switch (last) {
-        case 0xC3: {
-            SKIPREST = false;
-            return (uint8_t)(ch | 0xC0);
-        }
-        // Map UTF-8 Greek chars to Windows-1253 (CP-1253) ASCII codes
-        case 0xCE: {
-            SKIPREST = false;
-            // Uppercase Greek: Α-Ρ (U+0391-U+03A1) -> CP-1253 193-209
-            if (ch >= 145 && ch <= 161)
-                return (uint8_t)(ch + 48);
-            // Uppercase Greek: Σ-Ω (U+03A3-U+03A9) -> CP-1253 211-217
-            else if (ch >= 163 && ch <= 169)
-                return (uint8_t)(ch + 48);
-            // Lowercase Greek: α-ρ (U+03B1-U+03C1) -> CP-1253 225-241
-            else if (ch >= 177 && ch <= 193)
-                return (uint8_t)(ch + 48);
-            break;
-        }
-        case 0xCF: {
-            SKIPREST = false;
-            // Lowercase Greek: ς-ω (U+03C2-U+03C9) -> CP-1253 242-249
-            if (ch >= 130 && ch <= 137)
-                return (uint8_t)(ch + 112);
-            break;
-        }
-        }
-
-        // We want to strip out prefix chars for two-byte Greek char formats
-        if (ch == 0xC2 || ch == 0xC3 || ch == 0xCE || ch == 0xCF)
-            return (uint8_t)0;
-
 #endif
 
         // If we already returned an unconvertable-character symbol for this unconvertable-character sequence, return NULs for the
@@ -751,8 +715,6 @@ class Screen : public concurrency::OSThread
     // Whether we are showing the regular screen (as opposed to booth screen or
     // Bluetooth PIN screen)
     bool showingNormalScreen = false;
-    /// Track USB power state to only wake screen on actual power state changes
-    bool lastPowerUSBState = false;
 
     // Implementation to Adjust Brightness
     uint8_t brightness = BRIGHTNESS_DEFAULT; // H = 254, MH = 192, ML = 130 L = 103

src/graphics/ScreenFonts.h

@@ -16,17 +16,10 @@
 #include "graphics/fonts/OLEDDisplayFontsCS.h"
 #endif
 
-#ifdef OLED_GR
-#include "graphics/fonts/OLEDDisplayFontsGR.h"
-#endif
-
 #if defined(CROWPANEL_ESP32S3_5_EPAPER) && defined(USE_EINK)
 #include "graphics/fonts/EinkDisplayFonts.h"
 #endif
 
-#ifdef OLED_GR
-#define FONT_SMALL_LOCAL ArialMT_Plain_10_GR // Height: 13
-#else
 #ifdef OLED_PL
 #define FONT_SMALL_LOCAL ArialMT_Plain_10_PL
 #else
@@ -44,10 +37,6 @@
 #endif
 #endif
 #endif
-#endif
-#ifdef OLED_GR
-#define FONT_MEDIUM_LOCAL ArialMT_Plain_16_GR // Height: 19
-#else
 #ifdef OLED_PL
 #define FONT_MEDIUM_LOCAL ArialMT_Plain_16_PL // Height: 19
 #else
@@ -65,10 +54,6 @@
 #endif
 #endif
 #endif
-#endif
-#ifdef OLED_GR
-#define FONT_LARGE_LOCAL ArialMT_Plain_24_GR // Height: 28
-#else
 #ifdef OLED_PL
 #define FONT_LARGE_LOCAL ArialMT_Plain_24_PL // Height: 28
 #else
@@ -86,7 +71,6 @@
 #endif
 #endif
 #endif
-#endif
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
      defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) ||             \

src/graphics/draw/DebugRenderer.cpp

@@ -438,7 +438,7 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
         if (currentResolution == ScreenResolution::UltraLow) {
             snprintf(frequencyslot, sizeof(frequencyslot), "%sMHz (%d)", freqStr, config.lora.channel_num);
         } else {
-            snprintf(frequencyslot, sizeof(frequencyslot), "Freq: %sMHz (%d)", freqStr, config.lora.channel_num);
+            snprintf(frequencyslot, sizeof(frequencyslot), "Freq/Ch: %sMHz (%d)", freqStr, config.lora.channel_num);
         }
     }
     size_t len = strlen(frequencyslot);

src/graphics/draw/MenuHandler.cpp

@@ -59,18 +59,17 @@ BannerOverlayOptions createStaticBannerOptions(const char *message, const MenuOp
 } // namespace
 
 menuHandler::screenMenus menuHandler::menuQueue = menu_none;
-uint32_t menuHandler::pickedNodeNum = 0;
 bool test_enabled = false;
 uint8_t test_count = 0;
 
 void menuHandler::loraMenu()
 {
-    static const char *optionsArray[] = {"Back", "Device Role", "Radio Preset", "Frequency Slot", "LoRa Region"};
-    enum optionsNumbers { Back = 0, device_role_picker = 1, radio_preset_picker = 2, frequency_slot = 3, lora_picker = 4 };
+    static const char *optionsArray[] = {"Back", "Device Role", "Radio Preset", "LoRa Region"};
+    enum optionsNumbers { Back = 0, device_role_picker = 1, radio_preset_picker = 2, lora_picker = 3 };
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "LoRa Actions";
     bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 5;
+    bannerOptions.optionsCount = 4;
     bannerOptions.bannerCallback = [](int selected) -> void {
         if (selected == Back) {
             // No action
@@ -78,8 +77,6 @@ void menuHandler::loraMenu()
             menuHandler::menuQueue = menuHandler::device_role_picker;
         } else if (selected == radio_preset_picker) {
             menuHandler::menuQueue = menuHandler::radio_preset_picker;
-        } else if (selected == frequency_slot) {
-            menuHandler::menuQueue = menuHandler::frequency_slot;
         } else if (selected == lora_picker) {
             menuHandler::menuQueue = menuHandler::lora_picker;
         }
@@ -250,69 +247,6 @@ void menuHandler::DeviceRolePicker()
     screen->showOverlayBanner(bannerOptions);
 }
 
-void menuHandler::FrequencySlotPicker()
-{
-
-    enum ReplyOptions : int { Back = -1 };
-    constexpr int MAX_CHANNEL_OPTIONS = 202;
-    static const char *optionsArray[MAX_CHANNEL_OPTIONS];
-    static int optionsEnumArray[MAX_CHANNEL_OPTIONS];
-    static char channelText[MAX_CHANNEL_OPTIONS - 1][12];
-    int options = 0;
-    optionsArray[options] = "Back";
-    optionsEnumArray[options++] = Back;
-    optionsArray[options] = "Slot 0 (Auto)";
-    optionsEnumArray[options++] = 0;
-
-    // Calculate number of channels (copied from RadioInterface::applyModemConfig())
-    meshtastic_Config_LoRaConfig &loraConfig = config.lora;
-    double bw = loraConfig.use_preset ? modemPresetToBwKHz(loraConfig.modem_preset, myRegion->wideLora)
-                                      : bwCodeToKHz(loraConfig.bandwidth);
-
-    uint32_t numChannels = 0;
-    if (myRegion) {
-        numChannels = (uint32_t)floor((myRegion->freqEnd - myRegion->freqStart) / (myRegion->spacing + (bw / 1000.0)));
-    } else {
-        LOG_WARN("Region not set, cannot calculate number of channels");
-        return;
-    }
-
-    if (numChannels > (uint32_t)(MAX_CHANNEL_OPTIONS - 2))
-        numChannels = (uint32_t)(MAX_CHANNEL_OPTIONS - 2);
-
-    for (uint32_t ch = 1; ch <= numChannels; ch++) {
-        snprintf(channelText[ch - 1], sizeof(channelText[ch - 1]), "Slot %lu", (unsigned long)ch);
-        optionsArray[options] = channelText[ch - 1];
-        optionsEnumArray[options++] = (int)ch;
-    }
-
-    BannerOverlayOptions bannerOptions;
-    bannerOptions.message = "Frequency Slot";
-    bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsEnumPtr = optionsEnumArray;
-    bannerOptions.optionsCount = options;
-
-    // Start highlight on current channel if possible, otherwise on "1"
-    int initial = (int)config.lora.channel_num + 1;
-    if (initial < 2 || initial > (int)numChannels + 1)
-        initial = 1;
-    bannerOptions.InitialSelected = initial;
-
-    bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == Back) {
-            menuHandler::menuQueue = menuHandler::lora_Menu;
-            screen->runNow();
-            return;
-        }
-
-        config.lora.channel_num = selected;
-        service->reloadConfig(SEGMENT_CONFIG);
-        rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
-    };
-
-    screen->showOverlayBanner(bannerOptions);
-}
-
 void menuHandler::RadioPresetPicker()
 {
     static const RadioPresetOption presetOptions[] = {
@@ -343,8 +277,6 @@ void menuHandler::RadioPresetPicker()
             }
 
             config.lora.modem_preset = option.value;
-            config.lora.channel_num = 0;        // Reset to default channel for the preset
-            config.lora.override_frequency = 0; // Clear any custom frequency
             service->reloadConfig(SEGMENT_CONFIG);
             rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
         });
@@ -517,7 +449,7 @@ void menuHandler::clockMenu()
 }
 void menuHandler::messageResponseMenu()
 {
-    enum optionsNumbers { Back = 0, ViewMode, DeleteMenu, ReplyMenu, MuteChannel, Aloud, enumEnd };
+    enum optionsNumbers { Back = 0, ViewMode, DeleteAll, DeleteOldest, ReplyMenu, MuteChannel, Aloud, enumEnd };
 
     static const char *optionsArray[enumEnd];
     static int optionsEnumArray[enumEnd];
@@ -547,7 +479,7 @@ void menuHandler::messageResponseMenu()
 
     // Delete submenu
     optionsArray[options] = "Delete";
-    optionsEnumArray[options++] = DeleteMenu;
+    optionsEnumArray[options++] = 900;
 
 #ifdef HAS_I2S
     optionsArray[options] = "Read Aloud";
@@ -588,10 +520,34 @@ void menuHandler::messageResponseMenu()
                 nodeDB->saveToDisk();
             }
 
-        } else if (selected == DeleteMenu) {
+            // Delete submenu
+        } else if (selected == 900) {
             menuHandler::menuQueue = menuHandler::delete_messages_menu;
             screen->runNow();
 
+            // Delete oldest FIRST (only change)
+        } else if (selected == DeleteOldest) {
+            auto mode = graphics::MessageRenderer::getThreadMode();
+            int ch = graphics::MessageRenderer::getThreadChannel();
+            uint32_t peer = graphics::MessageRenderer::getThreadPeer();
+
+            if (mode == graphics::MessageRenderer::ThreadMode::ALL) {
+                // Global oldest
+                messageStore.deleteOldestMessage();
+            } else if (mode == graphics::MessageRenderer::ThreadMode::CHANNEL) {
+                // Oldest in current channel
+                messageStore.deleteOldestMessageInChannel(ch);
+            } else if (mode == graphics::MessageRenderer::ThreadMode::DIRECT) {
+                // Oldest in current DM
+                messageStore.deleteOldestMessageWithPeer(peer);
+            }
+
+            // Delete all messages
+        } else if (selected == DeleteAll) {
+            messageStore.clearAllMessages();
+            graphics::MessageRenderer::clearThreadRegistries();
+            graphics::MessageRenderer::clearMessageCache();
+
 #ifdef HAS_I2S
         } else if (selected == Aloud) {
             const meshtastic_MeshPacket &mp = devicestate.rx_text_message;
@@ -760,6 +716,7 @@ void menuHandler::deleteMessagesMenu()
             } else if (mode == graphics::MessageRenderer::ThreadMode::DIRECT) {
                 messageStore.deleteOldestMessageWithPeer(peer);
             }
+
             return;
         }
 
@@ -772,6 +729,7 @@ void menuHandler::deleteMessagesMenu()
             } else if (mode == graphics::MessageRenderer::ThreadMode::DIRECT) {
                 messageStore.deleteAllMessagesWithPeer(peer);
             }
+
             return;
         }
     };
@@ -1281,13 +1239,20 @@ void menuHandler::positionBaseMenu()
 
 void menuHandler::nodeListMenu()
 {
-    enum optionsNumbers { Back, NodePicker, TraceRoute, Verify, Reset, NodeNameLength, enumEnd };
+    enum optionsNumbers { Back, Favorite, TraceRoute, Verify, Reset, NodeNameLength, enumEnd };
     static const char *optionsArray[enumEnd] = {"Back"};
     static int optionsEnumArray[enumEnd] = {Back};
     int options = 1;
 
-    optionsArray[options] = "Node Actions / Settings";
-    optionsEnumArray[options++] = NodePicker;
+    optionsArray[options] = "Add Favorite";
+    optionsEnumArray[options++] = Favorite;
+    optionsArray[options] = "Trace Route";
+    optionsEnumArray[options++] = TraceRoute;
+
+    if (currentResolution != ScreenResolution::UltraLow) {
+        optionsArray[options] = "Key Verification";
+        optionsEnumArray[options++] = Verify;
+    }
 
     if (currentResolution != ScreenResolution::UltraLow) {
         optionsArray[options] = "Show Long/Short Name";
@@ -1302,12 +1267,18 @@ void menuHandler::nodeListMenu()
     bannerOptions.optionsCount = options;
     bannerOptions.optionsEnumPtr = optionsEnumArray;
     bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == NodePicker) {
-            menuQueue = NodePicker_menu;
+        if (selected == Favorite) {
+            menuQueue = add_favorite;
+            screen->runNow();
+        } else if (selected == Verify) {
+            menuQueue = key_verification_init;
             screen->runNow();
         } else if (selected == Reset) {
             menuQueue = reset_node_db_menu;
             screen->runNow();
+        } else if (selected == TraceRoute) {
+            menuQueue = trace_route_menu;
+            screen->runNow();
         } else if (selected == NodeNameLength) {
             menuHandler::menuQueue = menuHandler::node_name_length_menu;
             screen->runNow();
@@ -1316,159 +1287,6 @@ void menuHandler::nodeListMenu()
     screen->showOverlayBanner(bannerOptions);
 }
 
-void menuHandler::NodePicker()
-{
-    const char *NODE_PICKER_TITLE;
-    if (currentResolution == ScreenResolution::UltraLow) {
-        NODE_PICKER_TITLE = "Pick Node";
-    } else {
-        NODE_PICKER_TITLE = "Pick A Node";
-    }
-    screen->showNodePicker(NODE_PICKER_TITLE, 30000, [](uint32_t nodenum) -> void {
-        LOG_INFO("Nodenum: %u", nodenum);
-        // Store the selection so the Manage Node menu knows which node to operate on
-        menuHandler::pickedNodeNum = nodenum;
-        // Keep UI favorite context in sync (used elsewhere for some node-based actions)
-        graphics::UIRenderer::currentFavoriteNodeNum = nodenum;
-        menuQueue = Manage_Node_menu;
-        screen->runNow();
-    });
-}
-
-void menuHandler::ManageNodeMenu()
-{
-    // If we don't have a node selected yet, go fast exit
-    auto node = nodeDB->getMeshNode(menuHandler::pickedNodeNum);
-    if (!node) {
-        return;
-    }
-    enum optionsNumbers { Back, Favorite, Mute, TraceRoute, KeyVerification, Ignore, enumEnd };
-    static const char *optionsArray[enumEnd] = {"Back"};
-    static int optionsEnumArray[enumEnd] = {Back};
-    int options = 1;
-
-    if (node->is_favorite) {
-        optionsArray[options] = "Unfavorite";
-    } else {
-        optionsArray[options] = "Favorite";
-    }
-    optionsEnumArray[options++] = Favorite;
-
-    bool isMuted = (node->bitfield & NODEINFO_BITFIELD_IS_MUTED_MASK) != 0;
-    if (isMuted) {
-        optionsArray[options] = "Unmute Notifications";
-    } else {
-        optionsArray[options] = "Mute Notifications";
-    }
-    optionsEnumArray[options++] = Mute;
-
-    optionsArray[options] = "Trace Route";
-    optionsEnumArray[options++] = TraceRoute;
-
-    optionsArray[options] = "Key Verification";
-    optionsEnumArray[options++] = KeyVerification;
-
-    if (node->is_ignored) {
-        optionsArray[options] = "Unignore Node";
-    } else {
-        optionsArray[options] = "Ignore Node";
-    }
-    optionsEnumArray[options++] = Ignore;
-
-    BannerOverlayOptions bannerOptions;
-
-    std::string title = "";
-    if (node->has_user && node->user.long_name && node->user.long_name[0]) {
-        title += sanitizeString(node->user.long_name).substr(0, 15);
-    } else {
-        char buf[20];
-        snprintf(buf, sizeof(buf), "%08X", (unsigned int)node->num);
-        title += buf;
-    }
-    bannerOptions.message = title.c_str();
-    bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = options;
-    bannerOptions.optionsEnumPtr = optionsEnumArray;
-    bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == Back) {
-            menuQueue = node_base_menu;
-            screen->runNow();
-            return;
-        }
-
-        if (selected == Favorite) {
-            auto n = nodeDB->getMeshNode(menuHandler::pickedNodeNum);
-            if (!n) {
-                return;
-            }
-            if (n->is_favorite) {
-                LOG_INFO("Removing node %08X from favorites", menuHandler::pickedNodeNum);
-                nodeDB->set_favorite(false, menuHandler::pickedNodeNum);
-            } else {
-                LOG_INFO("Adding node %08X to favorites", menuHandler::pickedNodeNum);
-                nodeDB->set_favorite(true, menuHandler::pickedNodeNum);
-            }
-            screen->setFrames(graphics::Screen::FOCUS_PRESERVE);
-            return;
-        }
-
-        if (selected == Mute) {
-            auto n = nodeDB->getMeshNode(menuHandler::pickedNodeNum);
-            if (!n) {
-                return;
-            }
-
-            if (n->bitfield & NODEINFO_BITFIELD_IS_MUTED_MASK) {
-                n->bitfield &= ~NODEINFO_BITFIELD_IS_MUTED_MASK;
-                LOG_INFO("Unmuted node %08X", menuHandler::pickedNodeNum);
-            } else {
-                n->bitfield |= NODEINFO_BITFIELD_IS_MUTED_MASK;
-                LOG_INFO("Muted node %08X", menuHandler::pickedNodeNum);
-            }
-            nodeDB->notifyObservers(true);
-            nodeDB->saveToDisk();
-            screen->setFrames(graphics::Screen::FOCUS_PRESERVE);
-            return;
-        }
-
-        if (selected == TraceRoute) {
-            LOG_INFO("Starting traceroute to %08X", menuHandler::pickedNodeNum);
-            if (traceRouteModule) {
-                traceRouteModule->startTraceRoute(menuHandler::pickedNodeNum);
-            }
-            return;
-        }
-
-        if (selected == KeyVerification) {
-            LOG_INFO("Initiating key verification with %08X", menuHandler::pickedNodeNum);
-            if (keyVerificationModule) {
-                keyVerificationModule->sendInitialRequest(menuHandler::pickedNodeNum);
-            }
-            return;
-        }
-
-        if (selected == Ignore) {
-            auto n = nodeDB->getMeshNode(menuHandler::pickedNodeNum);
-            if (!n) {
-                return;
-            }
-
-            if (n->is_ignored) {
-                n->is_ignored = false;
-                LOG_INFO("Unignoring node %08X", menuHandler::pickedNodeNum);
-            } else {
-                n->is_ignored = true;
-                LOG_INFO("Ignoring node %08X", menuHandler::pickedNodeNum);
-            }
-            nodeDB->notifyObservers(true);
-            nodeDB->saveToDisk();
-            screen->setFrames(graphics::Screen::FOCUS_PRESERVE);
-            return;
-        }
-    };
-    screen->showOverlayBanner(bannerOptions);
-}
-
 void menuHandler::nodeNameLengthMenu()
 {
     static const NodeNameOption nodeNameOptions[] = {
@@ -1497,7 +1315,6 @@ void menuHandler::nodeNameLengthMenu()
                                                        }
 
                                                        config.display.use_long_node_name = option.value;
-                                                       saveUIConfig();
                                                        LOG_INFO("Setting names to %s", option.value ? "long" : "short");
                                                    });
 
@@ -2023,7 +1840,7 @@ void menuHandler::TFTColorPickerMenu(OLEDDisplay *display)
     static const ScreenColorOption colorOptions[] = {
         {"Back", OptionsAction::Back},
         {"Default", OptionsAction::Select, ScreenColor(0, 0, 0, true)},
-        {"Meshtastic Green", OptionsAction::Select, ScreenColor(0x67, 0xEA, 0x94)},
+        {"Meshtastic Green", OptionsAction::Select, ScreenColor(103, 234, 148)},
         {"Yellow", OptionsAction::Select, ScreenColor(255, 255, 128)},
         {"Red", OptionsAction::Select, ScreenColor(255, 64, 64)},
         {"Orange", OptionsAction::Select, ScreenColor(255, 160, 20)},
@@ -2073,7 +1890,7 @@ void menuHandler::TFTColorPickerMenu(OLEDDisplay *display)
 #ifdef TFT_MESH_OVERRIDE
                 TFT_MESH = TFT_MESH_OVERRIDE;
 #else
-                TFT_MESH = COLOR565(255, 255, 128);
+                TFT_MESH = COLOR565(0x67, 0xEA, 0x94);
 #endif
             } else {
                 TFT_MESH = COLOR565(r, g, b);
@@ -2167,6 +1984,21 @@ void menuHandler::shutdownMenu()
     screen->showOverlayBanner(bannerOptions);
 }
 
+void menuHandler::addFavoriteMenu()
+{
+    const char *NODE_PICKER_TITLE;
+    if (currentResolution == ScreenResolution::UltraLow) {
+        NODE_PICKER_TITLE = "Node Favorite";
+    } else {
+        NODE_PICKER_TITLE = "Node To Favorite";
+    }
+    screen->showNodePicker(NODE_PICKER_TITLE, 30000, [](uint32_t nodenum) -> void {
+        LOG_WARN("Nodenum: %u", nodenum);
+        nodeDB->set_favorite(true, nodenum);
+        screen->setFrames(graphics::Screen::FOCUS_PRESERVE);
+    });
+}
+
 void menuHandler::removeFavoriteMenu()
 {
 
@@ -2441,8 +2273,7 @@ void menuHandler::FrameToggles_menu()
         lora,
         clock,
         show_favorites,
-        show_env_telemetry,
-        show_aq_telemetry,
+        show_telemetry,
         show_power,
         enumEnd
     };
@@ -2487,11 +2318,8 @@ void menuHandler::FrameToggles_menu()
     optionsArray[options] = screen->isFrameHidden("show_favorites") ? "Show Favorites" : "Hide Favorites";
     optionsEnumArray[options++] = show_favorites;
 
-    optionsArray[options] = moduleConfig.telemetry.environment_screen_enabled ? "Hide Env. Telemetry" : "Show Env. Telemetry";
-    optionsEnumArray[options++] = show_env_telemetry;
-
-    optionsArray[options] = moduleConfig.telemetry.air_quality_screen_enabled ? "Hide AQ Telemetry" : "Show AQ Telemetry";
-    optionsEnumArray[options++] = show_aq_telemetry;
+    optionsArray[options] = moduleConfig.telemetry.environment_screen_enabled ? "Hide Telemetry" : "Show Telemetry";
+    optionsEnumArray[options++] = show_telemetry;
 
     optionsArray[options] = moduleConfig.telemetry.power_screen_enabled ? "Hide Power" : "Show Power";
     optionsEnumArray[options++] = show_power;
@@ -2554,14 +2382,10 @@ void menuHandler::FrameToggles_menu()
             screen->toggleFrameVisibility("show_favorites");
             menuHandler::menuQueue = menuHandler::FrameToggles;
             screen->runNow();
-        } else if (selected == show_env_telemetry) {
+        } else if (selected == show_telemetry) {
             moduleConfig.telemetry.environment_screen_enabled = !moduleConfig.telemetry.environment_screen_enabled;
             menuHandler::menuQueue = menuHandler::FrameToggles;
             screen->runNow();
-        } else if (selected == show_aq_telemetry) {
-            moduleConfig.telemetry.air_quality_screen_enabled = !moduleConfig.telemetry.air_quality_screen_enabled;
-            menuHandler::menuQueue = menuHandler::FrameToggles;
-            screen->runNow();
         } else if (selected == show_power) {
             moduleConfig.telemetry.power_screen_enabled = !moduleConfig.telemetry.power_screen_enabled;
             menuHandler::menuQueue = menuHandler::FrameToggles;
@@ -2618,9 +2442,6 @@ void menuHandler::handleMenuSwitch(OLEDDisplay *display)
     case radio_preset_picker:
         RadioPresetPicker();
         break;
-    case frequency_slot:
-        FrequencySlotPicker();
-        break;
     case no_timeout_lora_picker:
         LoraRegionPicker(0);
         break;
@@ -2689,11 +2510,8 @@ void menuHandler::handleMenuSwitch(OLEDDisplay *display)
     case shutdown_menu:
         shutdownMenu();
         break;
-    case NodePicker_menu:
-        NodePicker();
-        break;
-    case Manage_Node_menu:
-        ManageNodeMenu();
+    case add_favorite:
+        addFavoriteMenu();
         break;
     case remove_favorite:
         removeFavoriteMenu();

src/graphics/draw/MenuHandler.h

@@ -13,7 +13,6 @@ class menuHandler
         lora_picker,
         device_role_picker,
         radio_preset_picker,
-        frequency_slot,
         no_timeout_lora_picker,
         TZ_picker,
         twelve_hour_picker,
@@ -34,8 +33,7 @@ class menuHandler
         brightness_picker,
         reboot_menu,
         shutdown_menu,
-        NodePicker_menu,
-        Manage_Node_menu,
+        add_favorite,
         remove_favorite,
         test_menu,
         number_test,
@@ -57,14 +55,12 @@ class menuHandler
         DisplayUnits
     };
     static screenMenus menuQueue;
-    static uint32_t pickedNodeNum; // node selected by NodePicker for ManageNodeMenu
 
     static void OnboardMessage();
     static void LoraRegionPicker(uint32_t duration = 30000);
     static void loraMenu();
     static void DeviceRolePicker();
     static void RadioPresetPicker();
-    static void FrequencySlotPicker();
     static void handleMenuSwitch(OLEDDisplay *display);
     static void showConfirmationBanner(const char *message, std::function<void()> onConfirm);
     static void clockMenu();
@@ -94,8 +90,6 @@ class menuHandler
     static void BrightnessPickerMenu();
     static void rebootMenu();
     static void shutdownMenu();
-    static void NodePicker();
-    static void ManageNodeMenu();
     static void addFavoriteMenu();
     static void removeFavoriteMenu();
     static void traceRouteMenu();
@@ -140,7 +134,7 @@ struct ScreenColor {
     uint8_t b;
     bool useVariant;
 
-    explicit ScreenColor(uint8_t rIn = 0, uint8_t gIn = 0, uint8_t bIn = 0, bool variantIn = false)
+    ScreenColor(uint8_t rIn = 0, uint8_t gIn = 0, uint8_t bIn = 0, bool variantIn = false)
         : r(rIn), g(gIn), b(bIn), useVariant(variantIn)
     {
     }
@@ -155,7 +149,6 @@ using GPSToggleOption = MenuOption<meshtastic_Config_PositionConfig_GpsMode>;
 using GPSFormatOption = MenuOption<meshtastic_DeviceUIConfig_GpsCoordinateFormat>;
 using NodeNameOption = MenuOption<bool>;
 using PositionMenuOption = MenuOption<int>;
-using ManageNodeOption = MenuOption<int>;
 using ClockFaceOption = MenuOption<bool>;
 
 } // namespace graphics

src/graphics/draw/MessageRenderer.cpp

@@ -6,6 +6,7 @@
 #include "MessageStore.h"
 #include "NodeDB.h"
 #include "UIRenderer.h"
+#include "configuration.h"
 #include "gps/RTC.h"
 #include "graphics/Screen.h"
 #include "graphics/ScreenFonts.h"
@@ -19,6 +20,7 @@
 
 // External declarations
 extern bool hasUnreadMessage;
+extern meshtastic_DeviceState devicestate;
 extern graphics::Screen *screen;
 
 using graphics::Emote;
@@ -47,7 +49,7 @@ static inline size_t utf8CharLen(uint8_t c)
 }
 
 // Remove variation selectors (FE0F) and skin tone modifiers from emoji so they match your labels
-static std::string normalizeEmoji(const std::string &s)
+std::string normalizeEmoji(const std::string &s)
 {
     std::string out;
     for (size_t i = 0; i < s.size();) {
@@ -80,7 +82,6 @@ uint32_t pauseStart = 0;
 bool waitingToReset = false;
 bool scrollStarted = false;
 static bool didReset = false;
-static constexpr int MESSAGE_BLOCK_GAP = 6;
 
 void scrollUp()
 {
@@ -110,6 +111,22 @@ void scrollDown()
 
 void drawStringWithEmotes(OLEDDisplay *display, int x, int y, const std::string &line, const Emote *emotes, int emoteCount)
 {
+    std::string renderLine;
+    for (size_t i = 0; i < line.size();) {
+        uint8_t c = (uint8_t)line[i];
+        size_t len = utf8CharLen(c);
+        if (c == 0xEF && i + 2 < line.size() && (uint8_t)line[i + 1] == 0xB8 && (uint8_t)line[i + 2] == 0x8F) {
+            i += 3;
+            continue;
+        }
+        if (c == 0xF0 && i + 3 < line.size() && (uint8_t)line[i + 1] == 0x9F && (uint8_t)line[i + 2] == 0x8F &&
+            ((uint8_t)line[i + 3] >= 0xBB && (uint8_t)line[i + 3] <= 0xBF)) {
+            i += 4;
+            continue;
+        }
+        renderLine.append(line, i, len);
+        i += len;
+    }
     int cursorX = x;
     const int fontHeight = FONT_HEIGHT_SMALL;
 
@@ -186,7 +203,8 @@ void drawStringWithEmotes(OLEDDisplay *display, int x, int y, const std::string
 
         // Render the emote (if found)
         if (matchedEmote && i == nextEmotePos) {
-            int iconY = y + (lineHeight - matchedEmote->height) / 2;
+            // Vertically center emote relative to font baseline (not just midline)
+            int iconY = fontY + (fontHeight - matchedEmote->height) / 2;
             display->drawXbm(cursorX, iconY, matchedEmote->width, matchedEmote->height, matchedEmote->bitmap);
             cursorX += matchedEmote->width + 1;
             i += emojiLen;
@@ -405,102 +423,6 @@ static inline int getRenderedLineWidth(OLEDDisplay *display, const std::string &
     return totalWidth;
 }
 
-struct MessageBlock {
-    size_t start;
-    size_t end;
-    bool mine;
-};
-
-static int getDrawnLinePixelBottom(int lineTopY, const std::string &line, bool isHeaderLine)
-{
-    if (isHeaderLine) {
-        return lineTopY + (FONT_HEIGHT_SMALL - 1);
-    }
-
-    int tallest = FONT_HEIGHT_SMALL;
-    for (int e = 0; e < numEmotes; ++e) {
-        if (line.find(emotes[e].label) != std::string::npos) {
-            if (emotes[e].height > tallest)
-                tallest = emotes[e].height;
-        }
-    }
-
-    const int lineHeight = std::max(FONT_HEIGHT_SMALL, tallest);
-    const int iconTop = lineTopY + (lineHeight - tallest) / 2;
-
-    return iconTop + tallest - 1;
-}
-
-static void drawRoundedRectOutline(OLEDDisplay *display, int x, int y, int w, int h, int r)
-{
-    if (w <= 1 || h <= 1)
-        return;
-
-    if (r < 0)
-        r = 0;
-
-    int maxR = (std::min(w, h) / 2) - 1;
-    if (r > maxR)
-        r = maxR;
-
-    if (r == 0) {
-        display->drawRect(x, y, w, h);
-        return;
-    }
-
-    const int x0 = x;
-    const int y0 = y;
-    const int x1 = x + w - 1;
-    const int y1 = y + h - 1;
-
-    // sides
-    if (x0 + r <= x1 - r) {
-        display->drawLine(x0 + r, y0, x1 - r, y0); // top
-        display->drawLine(x0 + r, y1, x1 - r, y1); // bottom
-    }
-    if (y0 + r <= y1 - r) {
-        display->drawLine(x0, y0 + r, x0, y1 - r); // left
-        display->drawLine(x1, y0 + r, x1, y1 - r); // right
-    }
-
-    // corner arcs
-    display->drawCircleQuads(x0 + r, y0 + r, r, 2); // top left
-    display->drawCircleQuads(x1 - r, y0 + r, r, 1); // top right
-    display->drawCircleQuads(x1 - r, y1 - r, r, 8); // bottom right
-    display->drawCircleQuads(x0 + r, y1 - r, r, 4); // bottom left
-}
-
-static std::vector<MessageBlock> buildMessageBlocks(const std::vector<bool> &isHeaderVec, const std::vector<bool> &isMineVec)
-{
-    std::vector<MessageBlock> blocks;
-    if (isHeaderVec.empty())
-        return blocks;
-
-    size_t start = 0;
-    bool mine = isMineVec[0];
-
-    for (size_t i = 1; i < isHeaderVec.size(); ++i) {
-        if (isHeaderVec[i]) {
-            MessageBlock b;
-            b.start = start;
-            b.end = i - 1;
-            b.mine = mine;
-            blocks.push_back(b);
-
-            start = i;
-            mine = isMineVec[i];
-        }
-    }
-
-    MessageBlock last;
-    last.start = start;
-    last.end = isHeaderVec.size() - 1;
-    last.mine = mine;
-    blocks.push_back(last);
-
-    return blocks;
-}
-
 static void drawMessageScrollbar(OLEDDisplay *display, int visibleHeight, int totalHeight, int scrollOffset, int startY)
 {
     if (totalHeight <= visibleHeight)
@@ -560,14 +482,9 @@ void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
     constexpr int LEFT_MARGIN = 2;
     constexpr int RIGHT_MARGIN = 2;
     constexpr int SCROLLBAR_WIDTH = 3;
-    constexpr int BUBBLE_PAD_X = 3;
-    constexpr int BUBBLE_PAD_Y = 4;
-    constexpr int BUBBLE_RADIUS = 4;
-    constexpr int BUBBLE_MIN_W = 24;
-    constexpr int BUBBLE_TEXT_INDENT = 2;
 
-    // Derived widths
-    const int leftTextWidth = SCREEN_WIDTH - LEFT_MARGIN - RIGHT_MARGIN - (BUBBLE_PAD_X * 2);
+    const int leftTextWidth = SCREEN_WIDTH - LEFT_MARGIN - RIGHT_MARGIN;
+
     const int rightTextWidth = SCREEN_WIDTH - LEFT_MARGIN - RIGHT_MARGIN - SCROLLBAR_WIDTH;
 
     // Title string depending on mode
@@ -630,28 +547,7 @@ void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
         char chanType[32] = "";
         if (currentMode == ThreadMode::ALL) {
             if (m.dest == NODENUM_BROADCAST) {
-                const char *name = channels.getName(m.channelIndex);
-                if (currentResolution == ScreenResolution::Low || currentResolution == ScreenResolution::UltraLow) {
-                    if (strcmp(name, "ShortTurbo") == 0)
-                        name = "ShortT";
-                    else if (strcmp(name, "ShortSlow") == 0)
-                        name = "ShortS";
-                    else if (strcmp(name, "ShortFast") == 0)
-                        name = "ShortF";
-                    else if (strcmp(name, "MediumSlow") == 0)
-                        name = "MedS";
-                    else if (strcmp(name, "MediumFast") == 0)
-                        name = "MedF";
-                    else if (strcmp(name, "LongSlow") == 0)
-                        name = "LongS";
-                    else if (strcmp(name, "LongFast") == 0)
-                        name = "LongF";
-                    else if (strcmp(name, "LongTurbo") == 0)
-                        name = "LongT";
-                    else if (strcmp(name, "LongMod") == 0)
-                        name = "LongM";
-                }
-                snprintf(chanType, sizeof(chanType), "#%s", name);
+                snprintf(chanType, sizeof(chanType), "#%s", channels.getName(m.channelIndex));
             } else {
                 snprintf(chanType, sizeof(chanType), "(DM)");
             }
@@ -718,8 +614,8 @@ void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
         }
 
         // Shrink Sender name if needed
-        int availWidth = (mine ? rightTextWidth : leftTextWidth) - display->getStringWidth(timeBuf) -
-                         display->getStringWidth(chanType) - display->getStringWidth("   @...");
+        int availWidth = SCREEN_WIDTH - display->getStringWidth(timeBuf) - display->getStringWidth(chanType) -
+                         display->getStringWidth(" @...") - 10;
         if (availWidth < 0)
             availWidth = 0;
 
@@ -771,8 +667,6 @@ void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
     cachedLines = allLines;
     cachedHeights = calculateLineHeights(cachedLines, emotes, isHeader);
 
-    std::vector<MessageBlock> blocks = buildMessageBlocks(isHeader, isMine);
-
     // Scrolling logic (unchanged)
     int totalHeight = 0;
     for (size_t i = 0; i < cachedHeights.size(); ++i)
@@ -820,123 +714,12 @@ void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
 
     int finalScroll = (int)scrollY;
     int yOffset = -finalScroll + getTextPositions(display)[1];
-    const int contentTop = getTextPositions(display)[1];
-    const int contentBottom = scrollBottom; // already excludes nav line
-    const int rightEdge = SCREEN_WIDTH - SCROLLBAR_WIDTH - RIGHT_MARGIN;
-    const int bubbleGapY = std::max(1, MESSAGE_BLOCK_GAP / 2);
-
-    std::vector<int> lineTop;
-    lineTop.resize(cachedLines.size());
-    {
-        int acc = 0;
-        for (size_t i = 0; i < cachedLines.size(); ++i) {
-            lineTop[i] = yOffset + acc;
-            acc += cachedHeights[i];
-        }
-    }
-
-    // Draw bubbles
-    for (size_t bi = 0; bi < blocks.size(); ++bi) {
-        const auto &b = blocks[bi];
-        if (b.start >= cachedLines.size() || b.end >= cachedLines.size() || b.start > b.end)
-            continue;
-
-        int visualTop = lineTop[b.start];
-
-        int topY;
-        if (isHeader[b.start]) {
-            // Header start
-            constexpr int BUBBLE_PAD_TOP_HEADER = 1; // try 1 or 2
-            topY = visualTop - BUBBLE_PAD_TOP_HEADER;
-        } else {
-            // Body start
-            bool thisLineHasEmote = false;
-            for (int e = 0; e < numEmotes; ++e) {
-                if (cachedLines[b.start].find(emotes[e].label) != std::string::npos) {
-                    thisLineHasEmote = true;
-                    break;
-                }
-            }
-            if (thisLineHasEmote) {
-                constexpr int EMOTE_PADDING_ABOVE = 4;
-                visualTop -= EMOTE_PADDING_ABOVE;
-            }
-            topY = visualTop - BUBBLE_PAD_Y;
-        }
-        int visualBottom = getDrawnLinePixelBottom(lineTop[b.end], cachedLines[b.end], isHeader[b.end]);
-        int bottomY = visualBottom + BUBBLE_PAD_Y;
-
-        if (bi + 1 < blocks.size()) {
-            int nextHeaderIndex = (int)blocks[bi + 1].start;
-            int nextTop = lineTop[nextHeaderIndex];
-            int maxBottom = nextTop - 1 - bubbleGapY;
-            if (bottomY > maxBottom)
-                bottomY = maxBottom;
-        }
-
-        if (bottomY <= topY + 2)
-            continue;
-
-        if (bottomY < contentTop || topY > contentBottom - 1)
-            continue;
-
-        int maxLineW = 0;
-
-        for (size_t i = b.start; i <= b.end; ++i) {
-            int w = 0;
-            if (isHeader[i]) {
-                w = display->getStringWidth(cachedLines[i].c_str());
-                if (b.mine)
-                    w += 12; // room for ACK/NACK/relay mark
-            } else {
-                w = getRenderedLineWidth(display, cachedLines[i], emotes, numEmotes);
-            }
-            if (w > maxLineW)
-                maxLineW = w;
-        }
-
-        int bubbleW = std::max(BUBBLE_MIN_W, maxLineW + (BUBBLE_PAD_X * 2));
-        int bubbleH = (bottomY - topY) + 1;
-        int bubbleX = 0;
-        if (b.mine) {
-            bubbleX = rightEdge - bubbleW;
-        } else {
-            bubbleX = x;
-        }
-        if (bubbleX < x)
-            bubbleX = x;
-        if (bubbleX + bubbleW > rightEdge)
-            bubbleW = std::max(1, rightEdge - bubbleX);
-
-        if (bubbleW > 1 && bubbleH > 1) {
-            int r = BUBBLE_RADIUS;
-            int maxR = (std::min(bubbleW, bubbleH) / 2) - 1;
-            if (maxR < 0)
-                maxR = 0;
-            if (r > maxR)
-                r = maxR;
-
-            drawRoundedRectOutline(display, bubbleX, topY, bubbleW, bubbleH, r);
-            const int extra = 3;
-            const int rr = r + extra;
-            int x1 = bubbleX + bubbleW - 1;
-            int y1 = topY + bubbleH - 1;
-
-            if (!b.mine) {
-                // top-left corner square
-                display->drawLine(bubbleX, topY, bubbleX + rr, topY);
-                display->drawLine(bubbleX, topY, bubbleX, topY + rr);
-            } else {
-                // bottom-right corner square
-                display->drawLine(x1 - rr, y1, x1, y1);
-                display->drawLine(x1, y1 - rr, x1, y1);
-            }
-        }
-    }
 
     // Render visible lines
-    int lineY = yOffset;
     for (size_t i = 0; i < cachedLines.size(); ++i) {
+        int lineY = yOffset;
+        for (size_t j = 0; j < i; ++j)
+            lineY += cachedHeights[j];
 
         if (lineY > -cachedHeights[i] && lineY < scrollBottom) {
             if (isHeader[i]) {
@@ -945,28 +728,14 @@ void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
                 int headerX;
                 if (isMine[i]) {
                     // push header left to avoid overlap with scrollbar
-                    headerX = (SCREEN_WIDTH - SCROLLBAR_WIDTH - RIGHT_MARGIN) - w - BUBBLE_TEXT_INDENT;
+                    headerX = SCREEN_WIDTH - w - SCROLLBAR_WIDTH - RIGHT_MARGIN;
                     if (headerX < LEFT_MARGIN)
                         headerX = LEFT_MARGIN;
                 } else {
-                    headerX = x + BUBBLE_PAD_X + BUBBLE_TEXT_INDENT;
+                    headerX = x;
                 }
                 display->drawString(headerX, lineY, cachedLines[i].c_str());
 
-                // Draw underline just under header text
-                int underlineY = lineY + FONT_HEIGHT_SMALL;
-
-                int underlineW = w;
-                int maxW = rightEdge - headerX;
-                if (maxW < 0)
-                    maxW = 0;
-                if (underlineW > maxW)
-                    underlineW = maxW;
-
-                for (int px = 0; px < underlineW; ++px) {
-                    display->setPixel(headerX + px, underlineY);
-                }
-
                 // Draw ACK/NACK mark for our own messages
                 if (isMine[i]) {
                     int markX = headerX - 10;
@@ -984,28 +753,32 @@ void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
                     // AckStatus::NONE → show nothing
                 }
 
+                // Draw underline just under header text
+                int underlineY = lineY + FONT_HEIGHT_SMALL;
+                for (int px = 0; px < w; ++px) {
+                    display->setPixel(headerX + px, underlineY);
+                }
             } else {
                 // Render message line
                 if (isMine[i]) {
                     // Calculate actual rendered width including emotes
                     int renderedWidth = getRenderedLineWidth(display, cachedLines[i], emotes, numEmotes);
-                    int rightX = (SCREEN_WIDTH - SCROLLBAR_WIDTH - RIGHT_MARGIN) - renderedWidth - BUBBLE_TEXT_INDENT;
+                    int rightX = SCREEN_WIDTH - renderedWidth - SCROLLBAR_WIDTH - RIGHT_MARGIN;
                     if (rightX < LEFT_MARGIN)
                         rightX = LEFT_MARGIN;
 
                     drawStringWithEmotes(display, rightX, lineY, cachedLines[i], emotes, numEmotes);
                 } else {
-                    drawStringWithEmotes(display, x + BUBBLE_PAD_X + BUBBLE_TEXT_INDENT, lineY, cachedLines[i], emotes,
-                                         numEmotes);
+                    drawStringWithEmotes(display, x, lineY, cachedLines[i], emotes, numEmotes);
                 }
             }
         }
-
-        lineY += cachedHeights[i];
     }
+    int totalContentHeight = totalHeight;
+    int visibleHeight = usableHeight;
 
     // Draw scrollbar
-    drawMessageScrollbar(display, usableHeight, totalHeight, finalScroll, getTextPositions(display)[1]);
+    drawMessageScrollbar(display, visibleHeight, totalContentHeight, finalScroll, getTextPositions(display)[1]);
     graphics::drawCommonHeader(display, x, y, titleStr);
     graphics::drawCommonFooter(display, x, y);
 }
@@ -1068,6 +841,7 @@ std::vector<int> calculateLineHeights(const std::vector<std::string> &lines, con
     constexpr int HEADER_UNDERLINE_GAP = 0; // space between underline and first body line
     constexpr int HEADER_UNDERLINE_PIX = 1; // underline thickness (1px row drawn)
     constexpr int BODY_LINE_LEADING = -4;   // default vertical leading for normal body lines
+    constexpr int MESSAGE_BLOCK_GAP = 4;    // gap after a message block before a new header
     constexpr int EMOTE_PADDING_ABOVE = 4;  // space above emote line (added to line above)
     constexpr int EMOTE_PADDING_BELOW = 3;  // space below emote line (added to emote line)
 
@@ -1077,7 +851,6 @@ std::vector<int> calculateLineHeights(const std::vector<std::string> &lines, con
     for (size_t idx = 0; idx < lines.size(); ++idx) {
         const auto &line = lines[idx];
         const int baseHeight = FONT_HEIGHT_SMALL;
-        int lineHeight = baseHeight;
 
         // Detect if THIS line or NEXT line contains an emote
         bool hasEmote = false;
@@ -1099,6 +872,8 @@ std::vector<int> calculateLineHeights(const std::vector<std::string> &lines, con
             }
         }
 
+        int lineHeight = baseHeight;
+
         if (isHeaderVec[idx]) {
             // Header line spacing
             lineHeight = baseHeight + HEADER_UNDERLINE_PIX + HEADER_UNDERLINE_GAP;
@@ -1147,7 +922,7 @@ void handleNewMessage(OLEDDisplay *display, const StoredMessage &sm, const mesht
 
         // Banner logic
         const meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(packet.from);
-        char longName[48] = "?";
+        char longName[48] = "???";
         if (node && node->user.long_name) {
             strncpy(longName, node->user.long_name, sizeof(longName) - 1);
             longName[sizeof(longName) - 1] = '\0';

src/graphics/draw/NodeListRenderer.cpp

@@ -176,7 +176,6 @@ int calculateMaxScroll(int totalEntries, int visibleRows)
 
 void drawColumnSeparator(OLEDDisplay *display, int16_t x, int16_t yStart, int16_t yEnd)
 {
-    x = (currentResolution == ScreenResolution::High) ? x - 2 : (currentResolution == ScreenResolution::Low) ? x - 1 : x;
     for (int y = yStart; y <= yEnd; y += 2) {
         display->setPixel(x, y);
     }
@@ -206,11 +205,9 @@ void drawScrollbar(OLEDDisplay *display, int visibleNodeRows, int totalEntries,
 void drawEntryLastHeard(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16_t x, int16_t y, int columnWidth)
 {
     bool isLeftCol = (x < SCREEN_WIDTH / 2);
-    int nameMaxWidth = columnWidth - 25;
     int timeOffset = (currentResolution == ScreenResolution::High) ? (isLeftCol ? 7 : 10) : (isLeftCol ? 3 : 7);
 
     const char *nodeName = getSafeNodeName(display, node, columnWidth);
-    bool isMuted = (node->bitfield & NODEINFO_BITFIELD_IS_MUTED_MASK) != 0;
 
     char timeStr[10];
     uint32_t seconds = sinceLastSeen(node);
@@ -237,13 +234,6 @@ void drawEntryLastHeard(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int
             display->drawXbm(x, y + 5, smallbulletpoint_width, smallbulletpoint_height, smallbulletpoint);
         }
     }
-    if (node->is_ignored || isMuted) {
-        if (currentResolution == ScreenResolution::High) {
-            display->drawLine(x + 8, y + 8, (isLeftCol ? 0 : x - 4) + nameMaxWidth - 17, y + 8);
-        } else {
-            display->drawLine(x + 4, y + 6, (isLeftCol ? 0 : x - 3) + nameMaxWidth - 4, y + 6);
-        }
-    }
 
     int rightEdge = x + columnWidth - timeOffset;
     if (timeStr[strlen(timeStr) - 1] == 'm') // Fix the fact that our fonts don't line up well all the time
@@ -263,7 +253,6 @@ void drawEntryHopSignal(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int
     int barsXOffset = columnWidth - barsOffset;
 
     const char *nodeName = getSafeNodeName(display, node, columnWidth);
-    bool isMuted = (node->bitfield & NODEINFO_BITFIELD_IS_MUTED_MASK) != 0;
 
     display->setTextAlignment(TEXT_ALIGN_LEFT);
     display->setFont(FONT_SMALL);
@@ -276,13 +265,6 @@ void drawEntryHopSignal(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int
             display->drawXbm(x, y + 5, smallbulletpoint_width, smallbulletpoint_height, smallbulletpoint);
         }
     }
-    if (node->is_ignored || isMuted) {
-        if (currentResolution == ScreenResolution::High) {
-            display->drawLine(x + 8, y + 8, (isLeftCol ? 0 : x - 4) + nameMaxWidth - 17, y + 8);
-        } else {
-            display->drawLine(x + 4, y + 6, (isLeftCol ? 0 : x - 3) + nameMaxWidth - 4, y + 6);
-        }
-    }
 
     // Draw signal strength bars
     int bars = (node->snr > 5) ? 4 : (node->snr > 0) ? 3 : (node->snr > -5) ? 2 : (node->snr > -10) ? 1 : 0;
@@ -316,7 +298,6 @@ void drawNodeDistance(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16
         columnWidth - ((currentResolution == ScreenResolution::High) ? (isLeftCol ? 25 : 28) : (isLeftCol ? 20 : 22));
 
     const char *nodeName = getSafeNodeName(display, node, columnWidth);
-    bool isMuted = (node->bitfield & NODEINFO_BITFIELD_IS_MUTED_MASK) != 0;
     char distStr[10] = "";
 
     meshtastic_NodeInfoLite *ourNode = nodeDB->getMeshNode(nodeDB->getNodeNum());
@@ -377,13 +358,6 @@ void drawNodeDistance(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16
             display->drawXbm(x, y + 5, smallbulletpoint_width, smallbulletpoint_height, smallbulletpoint);
         }
     }
-    if (node->is_ignored || isMuted) {
-        if (currentResolution == ScreenResolution::High) {
-            display->drawLine(x + 8, y + 8, (isLeftCol ? 0 : x - 4) + nameMaxWidth - 17, y + 8);
-        } else {
-            display->drawLine(x + 4, y + 6, (isLeftCol ? 0 : x - 3) + nameMaxWidth - 4, y + 6);
-        }
-    }
 
     if (strlen(distStr) > 0) {
         int offset = (currentResolution == ScreenResolution::High)
@@ -418,7 +392,6 @@ void drawEntryCompass(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16
         columnWidth - ((currentResolution == ScreenResolution::High) ? (isLeftCol ? 25 : 28) : (isLeftCol ? 20 : 22));
 
     const char *nodeName = getSafeNodeName(display, node, columnWidth);
-    bool isMuted = (node->bitfield & NODEINFO_BITFIELD_IS_MUTED_MASK) != 0;
 
     display->setTextAlignment(TEXT_ALIGN_LEFT);
     display->setFont(FONT_SMALL);
@@ -430,13 +403,6 @@ void drawEntryCompass(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16
             display->drawXbm(x, y + 5, smallbulletpoint_width, smallbulletpoint_height, smallbulletpoint);
         }
     }
-    if (node->is_ignored || isMuted) {
-        if (currentResolution == ScreenResolution::High) {
-            display->drawLine(x + 8, y + 8, (isLeftCol ? 0 : x - 4) + nameMaxWidth - 17, y + 8);
-        } else {
-            display->drawLine(x + 4, y + 6, (isLeftCol ? 0 : x - 3) + nameMaxWidth - 4, y + 6);
-        }
-    }
 }
 
 void drawCompassArrow(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16_t x, int16_t y, int columnWidth, float myHeading,

src/graphics/fonts/OLEDDisplayFontsGR.cpp

@@ -1,429 +0,0 @@
-#ifdef OLED_GR
-
-#include "OLEDDisplayFontsGR.h"
-
-/**
- * Greek font for OLED displays - ArialMT Plain 10pt
- * Contains ASCII 32-127 + Greek characters mapped to CP-1253 positions (192-254)
- *
- * Generated using ThingPulse OLED font converter
- * Font: Arial, Size: 10px
- * Character set: Basic Latin + Greek (Α-Ω, α-ω, accented)
- *
- * CP-1253 Greek character mapping:
- * 193-209: Α Β Γ Δ Ε Ζ Η Θ Ι Κ Λ Μ Ν Ξ Ο Π Ρ
- * 211-217: Σ Τ Υ Φ Χ Ψ Ω
- * 225-241: α β γ δ ε ζ η θ ι κ λ μ ν ξ ο π ρ
- * 242-249: ς σ τ υ φ χ ψ ω
- */
-const uint8_t ArialMT_Plain_10_GR[] PROGMEM = {
-    0x0A, // Width: 10
-    0x0D, // Height: 13
-    0x20, // First char: 32
-    0xE0, // Number of chars: 224
-
-    // Jump Table (4 bytes per character: offset high, offset low, size, width)
-    // Characters 32-127: Standard ASCII
-    0xFF, 0xFF, 0x00, 0x03, // 32 space
-    0x00, 0x00, 0x04, 0x03, // 33 !
-    0x00, 0x04, 0x05, 0x04, // 34 "
-    0x00, 0x09, 0x09, 0x06, // 35 #
-    0x00, 0x12, 0x0A, 0x06, // 36 $
-    0x00, 0x1C, 0x10, 0x09, // 37 %
-    0x00, 0x2C, 0x0E, 0x08, // 38 &
-    0x00, 0x3A, 0x01, 0x02, // 39 '
-    0x00, 0x3B, 0x06, 0x04, // 40 (
-    0x00, 0x41, 0x06, 0x04, // 41 )
-    0x00, 0x47, 0x05, 0x04, // 42 *
-    0x00, 0x4C, 0x09, 0x06, // 43 +
-    0x00, 0x55, 0x04, 0x03, // 44 ,
-    0x00, 0x59, 0x03, 0x03, // 45 -
-    0x00, 0x5C, 0x04, 0x03, // 46 .
-    0x00, 0x60, 0x05, 0x04, // 47 /
-    0x00, 0x65, 0x0A, 0x06, // 48 0
-    0x00, 0x6F, 0x08, 0x05, // 49 1
-    0x00, 0x77, 0x0A, 0x06, // 50 2
-    0x00, 0x81, 0x0A, 0x06, // 51 3
-    0x00, 0x8B, 0x0B, 0x07, // 52 4
-    0x00, 0x96, 0x0A, 0x06, // 53 5
-    0x00, 0xA0, 0x0A, 0x06, // 54 6
-    0x00, 0xAA, 0x09, 0x06, // 55 7
-    0x00, 0xB3, 0x0A, 0x06, // 56 8
-    0x00, 0xBD, 0x0A, 0x06, // 57 9
-    0x00, 0xC7, 0x04, 0x03, // 58 :
-    0x00, 0xCB, 0x04, 0x03, // 59 ;
-    0x00, 0xCF, 0x0A, 0x06, // 60 <
-    0x00, 0xD9, 0x09, 0x06, // 61 =
-    0x00, 0xE2, 0x09, 0x06, // 62 >
-    0x00, 0xEB, 0x0B, 0x07, // 63 ?
-    0x00, 0xF6, 0x14, 0x0B, // 64 @
-    0x01, 0x0A, 0x0E, 0x08, // 65 A
-    0x01, 0x18, 0x0C, 0x07, // 66 B
-    0x01, 0x24, 0x0C, 0x07, // 67 C
-    0x01, 0x30, 0x0B, 0x07, // 68 D
-    0x01, 0x3B, 0x0C, 0x07, // 69 E
-    0x01, 0x47, 0x09, 0x06, // 70 F
-    0x01, 0x50, 0x0D, 0x08, // 71 G
-    0x01, 0x5D, 0x0C, 0x07, // 72 H
-    0x01, 0x69, 0x04, 0x03, // 73 I
-    0x01, 0x6D, 0x08, 0x05, // 74 J
-    0x01, 0x75, 0x0E, 0x08, // 75 K
-    0x01, 0x83, 0x0C, 0x07, // 76 L
-    0x01, 0x8F, 0x10, 0x09, // 77 M
-    0x01, 0x9F, 0x0C, 0x07, // 78 N
-    0x01, 0xAB, 0x0E, 0x08, // 79 O
-    0x01, 0xB9, 0x0B, 0x07, // 80 P
-    0x01, 0xC4, 0x0E, 0x08, // 81 Q
-    0x01, 0xD2, 0x0C, 0x07, // 82 R
-    0x01, 0xDE, 0x0C, 0x07, // 83 S
-    0x01, 0xEA, 0x0B, 0x07, // 84 T
-    0x01, 0xF5, 0x0C, 0x07, // 85 U
-    0x02, 0x01, 0x0D, 0x08, // 86 V
-    0x02, 0x0E, 0x11, 0x0A, // 87 W
-    0x02, 0x1F, 0x0E, 0x08, // 88 X
-    0x02, 0x2D, 0x0D, 0x08, // 89 Y
-    0x02, 0x3A, 0x0C, 0x07, // 90 Z
-    0x02, 0x46, 0x06, 0x04, // 91 [
-    0x02, 0x4C, 0x06, 0x04, // 92 backslash
-    0x02, 0x52, 0x04, 0x03, // 93 ]
-    0x02, 0x56, 0x09, 0x06, // 94 ^
-    0x02, 0x5F, 0x0C, 0x07, // 95 _
-    0x02, 0x6B, 0x03, 0x03, // 96 `
-    0x02, 0x6E, 0x0A, 0x06, // 97 a
-    0x02, 0x78, 0x0A, 0x06, // 98 b
-    0x02, 0x82, 0x0A, 0x06, // 99 c
-    0x02, 0x8C, 0x0A, 0x06, // 100 d
-    0x02, 0x96, 0x0A, 0x06, // 101 e
-    0x02, 0xA0, 0x05, 0x04, // 102 f
-    0x02, 0xA5, 0x0A, 0x06, // 103 g
-    0x02, 0xAF, 0x0A, 0x06, // 104 h
-    0x02, 0xB9, 0x04, 0x03, // 105 i
-    0x02, 0xBD, 0x04, 0x03, // 106 j
-    0x02, 0xC1, 0x08, 0x05, // 107 k
-    0x02, 0xC9, 0x04, 0x03, // 108 l
-    0x02, 0xCD, 0x10, 0x09, // 109 m
-    0x02, 0xDD, 0x0A, 0x06, // 110 n
-    0x02, 0xE7, 0x0A, 0x06, // 111 o
-    0x02, 0xF1, 0x0A, 0x06, // 112 p
-    0x02, 0xFB, 0x0A, 0x06, // 113 q
-    0x03, 0x05, 0x05, 0x04, // 114 r
-    0x03, 0x0A, 0x08, 0x05, // 115 s
-    0x03, 0x12, 0x06, 0x04, // 116 t
-    0x03, 0x18, 0x0A, 0x06, // 117 u
-    0x03, 0x22, 0x09, 0x06, // 118 v
-    0x03, 0x2B, 0x0E, 0x08, // 119 w
-    0x03, 0x39, 0x0A, 0x06, // 120 x
-    0x03, 0x43, 0x09, 0x06, // 121 y
-    0x03, 0x4C, 0x0A, 0x06, // 122 z
-    0x03, 0x56, 0x06, 0x04, // 123 {
-    0x03, 0x5C, 0x04, 0x03, // 124 |
-    0x03, 0x60, 0x05, 0x04, // 125 }
-    0x03, 0x65, 0x09, 0x06, // 126 ~
-    0xFF, 0xFF, 0x00, 0x03, // 127
-    // Characters 128-191: Placeholders (extended ASCII)
-    0xFF, 0xFF, 0x00, 0x03, // 128
-    0xFF, 0xFF, 0x00, 0x03, // 129
-    0xFF, 0xFF, 0x00, 0x03, // 130
-    0xFF, 0xFF, 0x00, 0x03, // 131
-    0xFF, 0xFF, 0x00, 0x03, // 132
-    0xFF, 0xFF, 0x00, 0x03, // 133
-    0xFF, 0xFF, 0x00, 0x03, // 134
-    0xFF, 0xFF, 0x00, 0x03, // 135
-    0xFF, 0xFF, 0x00, 0x03, // 136
-    0xFF, 0xFF, 0x00, 0x03, // 137
-    0xFF, 0xFF, 0x00, 0x03, // 138
-    0xFF, 0xFF, 0x00, 0x03, // 139
-    0xFF, 0xFF, 0x00, 0x03, // 140
-    0xFF, 0xFF, 0x00, 0x03, // 141
-    0xFF, 0xFF, 0x00, 0x03, // 142
-    0xFF, 0xFF, 0x00, 0x03, // 143
-    0xFF, 0xFF, 0x00, 0x03, // 144
-    0xFF, 0xFF, 0x00, 0x03, // 145
-    0xFF, 0xFF, 0x00, 0x03, // 146
-    0xFF, 0xFF, 0x00, 0x03, // 147
-    0xFF, 0xFF, 0x00, 0x03, // 148
-    0xFF, 0xFF, 0x00, 0x03, // 149
-    0xFF, 0xFF, 0x00, 0x03, // 150
-    0xFF, 0xFF, 0x00, 0x03, // 151
-    0xFF, 0xFF, 0x00, 0x03, // 152
-    0xFF, 0xFF, 0x00, 0x03, // 153
-    0xFF, 0xFF, 0x00, 0x03, // 154
-    0xFF, 0xFF, 0x00, 0x03, // 155
-    0xFF, 0xFF, 0x00, 0x03, // 156
-    0xFF, 0xFF, 0x00, 0x03, // 157
-    0xFF, 0xFF, 0x00, 0x03, // 158
-    0xFF, 0xFF, 0x00, 0x03, // 159
-    0xFF, 0xFF, 0x00, 0x03, // 160
-    0xFF, 0xFF, 0x00, 0x03, // 161
-    0xFF, 0xFF, 0x00, 0x03, // 162
-    0xFF, 0xFF, 0x00, 0x03, // 163
-    0xFF, 0xFF, 0x00, 0x03, // 164
-    0xFF, 0xFF, 0x00, 0x03, // 165
-    0xFF, 0xFF, 0x00, 0x03, // 166
-    0xFF, 0xFF, 0x00, 0x03, // 167
-    0xFF, 0xFF, 0x00, 0x03, // 168
-    0xFF, 0xFF, 0x00, 0x03, // 169
-    0xFF, 0xFF, 0x00, 0x03, // 170
-    0xFF, 0xFF, 0x00, 0x03, // 171
-    0xFF, 0xFF, 0x00, 0x03, // 172
-    0xFF, 0xFF, 0x00, 0x03, // 173
-    0xFF, 0xFF, 0x00, 0x03, // 174
-    0xFF, 0xFF, 0x00, 0x03, // 175
-    0xFF, 0xFF, 0x00, 0x03, // 176
-    0xFF, 0xFF, 0x00, 0x03, // 177
-    0xFF, 0xFF, 0x00, 0x03, // 178
-    0xFF, 0xFF, 0x00, 0x03, // 179
-    0xFF, 0xFF, 0x00, 0x03, // 180
-    0xFF, 0xFF, 0x00, 0x03, // 181
-    0xFF, 0xFF, 0x00, 0x03, // 182
-    0xFF, 0xFF, 0x00, 0x03, // 183
-    0xFF, 0xFF, 0x00, 0x03, // 184
-    0xFF, 0xFF, 0x00, 0x03, // 185
-    0xFF, 0xFF, 0x00, 0x03, // 186
-    0xFF, 0xFF, 0x00, 0x03, // 187
-    0xFF, 0xFF, 0x00, 0x03, // 188
-    0xFF, 0xFF, 0x00, 0x03, // 189
-    0xFF, 0xFF, 0x00, 0x03, // 190
-    0xFF, 0xFF, 0x00, 0x03, // 191
-    // Characters 192-255: Greek letters (CP-1253 positions)
-    0xFF, 0xFF, 0x00, 0x03, // 192 (unused)
-    0x03, 0x6E, 0x0E, 0x08, // 193 Α Alpha
-    0x03, 0x7C, 0x0C, 0x07, // 194 Β Beta
-    0x03, 0x88, 0x09, 0x06, // 195 Γ Gamma
-    0x03, 0x91, 0x0C, 0x07, // 196 Δ Delta
-    0x03, 0x9D, 0x0C, 0x07, // 197 Ε Epsilon
-    0x03, 0xA9, 0x0A, 0x06, // 198 Ζ Zeta
-    0x03, 0xB3, 0x0C, 0x07, // 199 Η Eta
-    0x03, 0xBF, 0x0E, 0x08, // 200 Θ Theta
-    0x03, 0xCD, 0x04, 0x03, // 201 Ι Iota
-    0x03, 0xD1, 0x0E, 0x08, // 202 Κ Kappa
-    0x03, 0xDF, 0x0E, 0x08, // 203 Λ Lambda
-    0x03, 0xED, 0x10, 0x09, // 204 Μ Mu
-    0x03, 0xFD, 0x0C, 0x07, // 205 Ν Nu
-    0x04, 0x09, 0x0C, 0x07, // 206 Ξ Xi
-    0x04, 0x15, 0x0E, 0x08, // 207 Ο Omicron
-    0x04, 0x23, 0x0C, 0x07, // 208 Π Pi
-    0x04, 0x2F, 0x0B, 0x07, // 209 Ρ Rho
-    0xFF, 0xFF, 0x00, 0x03, // 210 (unused)
-    0x04, 0x3A, 0x0C, 0x07, // 211 Σ Sigma
-    0x04, 0x46, 0x0B, 0x07, // 212 Τ Tau
-    0x04, 0x51, 0x0D, 0x08, // 213 Υ Upsilon
-    0x04, 0x5E, 0x0E, 0x08, // 214 Φ Phi
-    0x04, 0x6C, 0x0E, 0x08, // 215 Χ Chi
-    0x04, 0x7A, 0x0E, 0x08, // 216 Ψ Psi
-    0x04, 0x88, 0x0E, 0x08, // 217 Ω Omega
-    0xFF, 0xFF, 0x00, 0x03, // 218
-    0xFF, 0xFF, 0x00, 0x03, // 219
-    0xFF, 0xFF, 0x00, 0x03, // 220
-    0xFF, 0xFF, 0x00, 0x03, // 221
-    0xFF, 0xFF, 0x00, 0x03, // 222
-    0xFF, 0xFF, 0x00, 0x03, // 223
-    0xFF, 0xFF, 0x00, 0x03, // 224
-    0x04, 0x96, 0x0A, 0x06, // 225 α alpha
-    0x04, 0xA0, 0x0A, 0x06, // 226 β beta
-    0x04, 0xAA, 0x09, 0x06, // 227 γ gamma
-    0x04, 0xB3, 0x0A, 0x06, // 228 δ delta
-    0x04, 0xBD, 0x08, 0x05, // 229 ε epsilon
-    0x04, 0xC5, 0x08, 0x05, // 230 ζ zeta
-    0x04, 0xCD, 0x0A, 0x06, // 231 η eta
-    0x04, 0xD7, 0x0A, 0x06, // 232 θ theta
-    0x04, 0xE1, 0x04, 0x03, // 233 ι iota
-    0x04, 0xE5, 0x08, 0x05, // 234 κ kappa
-    0x04, 0xED, 0x0A, 0x06, // 235 λ lambda
-    0x04, 0xF7, 0x0A, 0x06, // 236 μ mu
-    0x05, 0x01, 0x08, 0x05, // 237 ν nu
-    0x05, 0x09, 0x0A, 0x06, // 238 ξ xi
-    0x05, 0x13, 0x0A, 0x06, // 239 ο omicron
-    0x05, 0x1D, 0x0A, 0x06, // 240 π pi
-    0x05, 0x27, 0x0A, 0x06, // 241 ρ rho
-    0x05, 0x31, 0x08, 0x05, // 242 ς final sigma
-    0x05, 0x39, 0x0A, 0x06, // 243 σ sigma
-    0x05, 0x43, 0x06, 0x04, // 244 τ tau
-    0x05, 0x49, 0x0A, 0x06, // 245 υ upsilon
-    0x05, 0x53, 0x0C, 0x07, // 246 φ phi
-    0x05, 0x5F, 0x0A, 0x06, // 247 χ chi
-    0x05, 0x69, 0x0C, 0x07, // 248 ψ psi
-    0x05, 0x75, 0x0C, 0x07, // 249 ω omega
-    0xFF, 0xFF, 0x00, 0x03, // 250
-    0xFF, 0xFF, 0x00, 0x03, // 251
-    0xFF, 0xFF, 0x00, 0x03, // 252
-    0xFF, 0xFF, 0x00, 0x03, // 253
-    0xFF, 0xFF, 0x00, 0x03, // 254
-    0xFF, 0xFF, 0x00, 0x03, // 255
-
-    // Font Data - Basic ASCII (32-127)
-    0x00, 0x00, 0xF8, 0x02,                                                                         // 33 !
-    0x38, 0x00, 0x00, 0x00, 0x38,                                                                   // 34 "
-    0xA0, 0x03, 0xE0, 0x00, 0xB8, 0x03, 0xE0, 0x00, 0xB8,                                           // 35 #
-    0x30, 0x01, 0x28, 0x02, 0xF8, 0x07, 0x48, 0x02, 0x90, 0x01,                                     // 36 $
-    0x00, 0x00, 0x30, 0x00, 0x48, 0x00, 0x30, 0x03, 0xC0, 0x00, 0xB0, 0x01, 0x48, 0x02, 0x80, 0x01, // 37 %
-    0x80, 0x01, 0x50, 0x02, 0x68, 0x02, 0xA8, 0x02, 0x18, 0x01, 0x80, 0x03, 0x80, 0x02,             // 38 &
-    0x38,                                                                                           // 39 '
-    0xE0, 0x03, 0x10, 0x04, 0x08, 0x08,                                                             // 40 (
-    0x08, 0x08, 0x10, 0x04, 0xE0, 0x03,                                                             // 41 )
-    0x28, 0x00, 0x18, 0x00, 0x28,                                                                   // 42 *
-    0x40, 0x00, 0x40, 0x00, 0xF0, 0x01, 0x40, 0x00, 0x40,                                           // 43 +
-    0x00, 0x00, 0x00, 0x06,                                                                         // 44 ,
-    0x80, 0x00, 0x80,                                                                               // 45 -
-    0x00, 0x00, 0x00, 0x02,                                                                         // 46 .
-    0x00, 0x03, 0xE0, 0x00, 0x18,                                                                   // 47 /
-    0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0xF0, 0x01,                                     // 48 0
-    0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0xF8, 0x03,                                                 // 49 1
-    0x10, 0x02, 0x08, 0x03, 0x88, 0x02, 0x48, 0x02, 0x30, 0x02,                                     // 50 2
-    0x10, 0x01, 0x08, 0x02, 0x48, 0x02, 0x48, 0x02, 0xB0, 0x01,                                     // 51 3
-    0xC0, 0x00, 0xA0, 0x00, 0x90, 0x00, 0x88, 0x00, 0xF8, 0x03, 0x80,                               // 52 4
-    0x60, 0x01, 0x38, 0x02, 0x28, 0x02, 0x28, 0x02, 0xC8, 0x01,                                     // 53 5
-    0xF0, 0x01, 0x28, 0x02, 0x28, 0x02, 0x28, 0x02, 0xD0, 0x01,                                     // 54 6
-    0x08, 0x00, 0x08, 0x03, 0xC8, 0x00, 0x38, 0x00, 0x08,                                           // 55 7
-    0xB0, 0x01, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0xB0, 0x01,                                     // 56 8
-    0x70, 0x01, 0x88, 0x02, 0x88, 0x02, 0x88, 0x02, 0xF0, 0x01,                                     // 57 9
-    0x00, 0x00, 0x20, 0x02,                                                                         // 58 :
-    0x00, 0x00, 0x20, 0x06,                                                                         // 59 ;
-    0x00, 0x00, 0x40, 0x00, 0xA0, 0x00, 0xA0, 0x00, 0x10, 0x01,                                     // 60 <
-    0xA0, 0x00, 0xA0, 0x00, 0xA0, 0x00, 0xA0, 0x00, 0xA0,                                           // 61 =
-    0x00, 0x00, 0x10, 0x01, 0xA0, 0x00, 0xA0, 0x00, 0x40,                                           // 62 >
-    0x10, 0x00, 0x08, 0x00, 0x08, 0x00, 0xC8, 0x02, 0x48, 0x00, 0x30,                               // 63 ?
-    0x00, 0x00, 0xC0, 0x03, 0x30, 0x04, 0xD0, 0x09, 0x28, 0x0A, 0x28, 0x0A, 0xC8, 0x0B, 0x68, 0x0A, 0x10, 0x05, 0xE0,
-    0x04,                                                                                                 // 64 @
-    0x00, 0x02, 0xC0, 0x01, 0xB0, 0x00, 0x88, 0x00, 0xB0, 0x00, 0xC0, 0x01, 0x00, 0x02,                   // 65 A
-    0x00, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0xF0, 0x01,                               // 66 B
-    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0x10, 0x01,                               // 67 C
-    0x00, 0x00, 0xF8, 0x03, 0x08, 0x02, 0x08, 0x02, 0x10, 0x01, 0xE0,                                     // 68 D
-    0x00, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02,                               // 69 E
-    0x00, 0x00, 0xF8, 0x03, 0x48, 0x00, 0x48, 0x00, 0x08,                                                 // 70 F
-    0x00, 0x00, 0xE0, 0x00, 0x10, 0x01, 0x08, 0x02, 0x48, 0x02, 0x50, 0x01, 0xC0,                         // 71 G
-    0x00, 0x00, 0xF8, 0x03, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0xF8, 0x03,                               // 72 H
-    0x00, 0x00, 0xF8, 0x03,                                                                               // 73 I
-    0x00, 0x03, 0x00, 0x02, 0x00, 0x02, 0xF8, 0x01,                                                       // 74 J
-    0x00, 0x00, 0xF8, 0x03, 0x80, 0x00, 0x60, 0x00, 0x90, 0x00, 0x08, 0x01, 0x00, 0x02,                   // 75 K
-    0x00, 0x00, 0xF8, 0x03, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02,                               // 76 L
-    0x00, 0x00, 0xF8, 0x03, 0x30, 0x00, 0xC0, 0x01, 0x00, 0x02, 0xC0, 0x01, 0x30, 0x00, 0xF8, 0x03,       // 77 M
-    0x00, 0x00, 0xF8, 0x03, 0x30, 0x00, 0x40, 0x00, 0x80, 0x01, 0xF8, 0x03,                               // 78 N
-    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0xF0, 0x01,                   // 79 O
-    0x00, 0x00, 0xF8, 0x03, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30,                                     // 80 P
-    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x03, 0x08, 0x03, 0xF0, 0x02,                   // 81 Q
-    0x00, 0x00, 0xF8, 0x03, 0x48, 0x00, 0x48, 0x00, 0xC8, 0x00, 0x30, 0x03,                               // 82 R
-    0x00, 0x00, 0x30, 0x01, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0x90, 0x01,                               // 83 S
-    0x00, 0x00, 0x08, 0x00, 0x08, 0x00, 0xF8, 0x03, 0x08, 0x00, 0x08,                                     // 84 T
-    0x00, 0x00, 0xF8, 0x01, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0xF8, 0x01,                               // 85 U
-    0x08, 0x00, 0x70, 0x00, 0x80, 0x01, 0x00, 0x02, 0x80, 0x01, 0x70, 0x00, 0x08,                         // 86 V
-    0x18, 0x00, 0xE0, 0x01, 0x00, 0x02, 0xF0, 0x01, 0x08, 0x00, 0xF0, 0x01, 0x00, 0x02, 0xE0, 0x01, 0x18, // 87 W
-    0x00, 0x02, 0x08, 0x01, 0x90, 0x00, 0x60, 0x00, 0x90, 0x00, 0x08, 0x01, 0x00, 0x02,                   // 88 X
-    0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0xC0, 0x03, 0x20, 0x00, 0x10, 0x00, 0x08,                         // 89 Y
-    0x08, 0x03, 0x88, 0x02, 0xC8, 0x02, 0x68, 0x02, 0x38, 0x02, 0x18, 0x02,                               // 90 Z
-    0x00, 0x00, 0xF8, 0x0F, 0x08, 0x08,                                                                   // 91 [
-    0x18, 0x00, 0xE0, 0x00, 0x00, 0x03,                                                                   // 92 backslash
-    0x08, 0x08, 0xF8, 0x0F,                                                                               // 93 ]
-    0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x30, 0x00, 0x40,                                                 // 94 ^
-    0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08,                               // 95 _
-    0x08, 0x00, 0x10,                                                                                     // 96 `
-    0x00, 0x00, 0x00, 0x03, 0xA0, 0x02, 0xA0, 0x02, 0xE0, 0x03,                                           // 97 a
-    0x00, 0x00, 0xF8, 0x03, 0x20, 0x02, 0x20, 0x02, 0xC0, 0x01,                                           // 98 b
-    0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0x40, 0x01,                                           // 99 c
-    0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0xF8, 0x03,                                           // 100 d
-    0x00, 0x00, 0xC0, 0x01, 0xA0, 0x02, 0xA0, 0x02, 0xC0, 0x02,                                           // 101 e
-    0x20, 0x00, 0xF0, 0x03, 0x28,                                                                         // 102 f
-    0x00, 0x00, 0xC0, 0x05, 0x20, 0x0A, 0x20, 0x0A, 0xE0, 0x07,                                           // 103 g
-    0x00, 0x00, 0xF8, 0x03, 0x20, 0x00, 0x20, 0x00, 0xC0, 0x03,                                           // 104 h
-    0x00, 0x00, 0xE8, 0x03,                                                                               // 105 i
-    0x00, 0x08, 0xE8, 0x07,                                                                               // 106 j
-    0xF8, 0x03, 0x80, 0x00, 0xC0, 0x01, 0x20, 0x02,                                                       // 107 k
-    0x00, 0x00, 0xF8, 0x03,                                                                               // 108 l
-    0x00, 0x00, 0xE0, 0x03, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x03, 0x20, 0x00, 0x20, 0x00, 0xC0, 0x03,       // 109 m
-    0x00, 0x00, 0xE0, 0x03, 0x20, 0x00, 0x20, 0x00, 0xC0, 0x03,                                           // 110 n
-    0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0xC0, 0x01,                                           // 111 o
-    0x00, 0x00, 0xE0, 0x0F, 0x20, 0x02, 0x20, 0x02, 0xC0, 0x01,                                           // 112 p
-    0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0xE0, 0x0F,                                           // 113 q
-    0x00, 0x00, 0xE0, 0x03, 0x20,                                                                         // 114 r
-    0x40, 0x02, 0xA0, 0x02, 0xA0, 0x02, 0x20, 0x01,                                                       // 115 s
-    0x20, 0x00, 0xF8, 0x03, 0x20, 0x02,                                                                   // 116 t
-    0x00, 0x00, 0xE0, 0x01, 0x00, 0x02, 0x00, 0x02, 0xE0, 0x03,                                           // 117 u
-    0x20, 0x00, 0xC0, 0x01, 0x00, 0x02, 0xC0, 0x01, 0x20,                                                 // 118 v
-    0xE0, 0x01, 0x00, 0x02, 0xC0, 0x01, 0x20, 0x00, 0xC0, 0x01, 0x00, 0x02, 0xE0, 0x01,                   // 119 w
-    0x20, 0x02, 0x40, 0x01, 0x80, 0x00, 0x40, 0x01, 0x20, 0x02,                                           // 120 x
-    0x20, 0x00, 0xC0, 0x09, 0x00, 0x06, 0xC0, 0x01, 0x20,                                                 // 121 y
-    0x20, 0x02, 0x20, 0x03, 0xA0, 0x02, 0x60, 0x02, 0x20, 0x02,                                           // 122 z
-    0x80, 0x00, 0x78, 0x0F, 0x08, 0x08,                                                                   // 123 {
-    0x00, 0x00, 0xF8, 0x0F,                                                                               // 124 |
-    0x08, 0x08, 0x78, 0x0F, 0x80,                                                                         // 125 }
-    0xC0, 0x00, 0x40, 0x00, 0xC0, 0x00, 0x80, 0x00, 0xC0,                                                 // 126 ~
-
-    // Greek uppercase letters (193-217 in CP-1253)
-    0x00, 0x02, 0xC0, 0x01, 0xB0, 0x00, 0x88, 0x00, 0xB0, 0x00, 0xC0, 0x01, 0x00, 0x02,             // Α Alpha (same as A)
-    0x00, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0xF0, 0x01,                         // Β Beta (same as B)
-    0x00, 0x00, 0xF8, 0x03, 0x08, 0x00, 0x08, 0x00, 0x18,                                           // Γ Gamma
-    0x00, 0x02, 0x80, 0x01, 0x60, 0x00, 0x10, 0x00, 0x60, 0x00, 0x80, 0x01, 0x00, 0x02,             // Δ Delta
-    0x00, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02,                         // Ε Epsilon (same as E)
-    0x08, 0x03, 0x88, 0x02, 0xC8, 0x02, 0x68, 0x02, 0x38, 0x02,                                     // Ζ Zeta (same as Z)
-    0x00, 0x00, 0xF8, 0x03, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0xF8, 0x03,                         // Η Eta (same as H)
-    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x48, 0x02, 0x48, 0x02, 0x08, 0x02, 0xF0, 0x01,             // Θ Theta
-    0x00, 0x00, 0xF8, 0x03,                                                                         // Ι Iota (same as I)
-    0x00, 0x00, 0xF8, 0x03, 0x80, 0x00, 0x60, 0x00, 0x90, 0x00, 0x08, 0x01, 0x00, 0x02,             // Κ Kappa (same as K)
-    0x00, 0x02, 0x80, 0x01, 0x70, 0x00, 0x08, 0x00, 0x70, 0x00, 0x80, 0x01, 0x00, 0x02,             // Λ Lambda
-    0x00, 0x00, 0xF8, 0x03, 0x30, 0x00, 0xC0, 0x01, 0x00, 0x02, 0xC0, 0x01, 0x30, 0x00, 0xF8, 0x03, // Μ Mu (same as M)
-    0x00, 0x00, 0xF8, 0x03, 0x30, 0x00, 0x40, 0x00, 0x80, 0x01, 0xF8, 0x03,                         // Ν Nu (same as N)
-    0x00, 0x00, 0x48, 0x02, 0x48, 0x02, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02,                         // Ξ Xi
-    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0xF0, 0x01,             // Ο Omicron (same as O)
-    0x00, 0x00, 0xF8, 0x03, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0xF8, 0x03,                         // Π Pi
-    0x00, 0x00, 0xF8, 0x03, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30,                               // Ρ Rho (same as P)
-    0x00, 0x00, 0x30, 0x01, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0x90, 0x01,                         // Σ Sigma
-    0x00, 0x00, 0x08, 0x00, 0x08, 0x00, 0xF8, 0x03, 0x08, 0x00, 0x08,                               // Τ Tau (same as T)
-    0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0xC0, 0x03, 0x20, 0x00, 0x10, 0x00, 0x08,                   // Υ Upsilon (same as Y)
-    0x00, 0x00, 0x70, 0x00, 0x88, 0x00, 0xF8, 0x03, 0x88, 0x00, 0x70, 0x00, 0x00,                   // Φ Phi
-    0x00, 0x02, 0x08, 0x01, 0x90, 0x00, 0x60, 0x00, 0x90, 0x00, 0x08, 0x01, 0x00, 0x02,             // Χ Chi (same as X)
-    0x00, 0x00, 0x08, 0x00, 0xF0, 0x01, 0x08, 0x02, 0xF8, 0x03, 0x08, 0x02, 0xF0, 0x01,             // Ψ Psi
-    0x00, 0x00, 0x08, 0x02, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0xF0, 0x01, 0x08, 0x02,             // Ω Omega
-
-    // Greek lowercase letters (225-249 in CP-1253)
-    0x00, 0x00, 0x00, 0x03, 0xA0, 0x02, 0xA0, 0x02, 0xE0, 0x03,             // α alpha
-    0x00, 0x00, 0xF8, 0x07, 0x20, 0x02, 0x20, 0x02, 0xC0, 0x01,             // β beta
-    0x00, 0x04, 0x20, 0x02, 0xC0, 0x01, 0x20, 0x00, 0x20,                   // γ gamma
-    0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0x50, 0x01,             // δ delta
-    0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0x40,                   // ε epsilon
-    0x00, 0x04, 0x00, 0x03, 0xE0, 0x00, 0x18,                               // ζ zeta
-    0x00, 0x00, 0xE0, 0x05, 0x20, 0x0A, 0x20, 0x02, 0xC0, 0x01,             // η eta
-    0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0xA0, 0x02, 0xC0, 0x01,             // θ theta
-    0x00, 0x00, 0xE0, 0x03,                                                 // ι iota
-    0xE0, 0x03, 0x80, 0x00, 0x40, 0x01, 0x20, 0x02,                         // κ kappa
-    0x00, 0x02, 0x80, 0x01, 0x40, 0x00, 0x20, 0x00, 0xE0, 0x03,             // λ lambda
-    0x00, 0x00, 0xE0, 0x0F, 0x00, 0x02, 0x00, 0x02, 0xE0, 0x03,             // μ mu
-    0x20, 0x00, 0xC0, 0x01, 0x00, 0x02, 0xE0, 0x03,                         // ν nu
-    0x00, 0x04, 0xC0, 0x03, 0xA0, 0x02, 0xA0, 0x02, 0xC0, 0x01,             // ξ xi
-    0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0xC0, 0x01,             // ο omicron
-    0x00, 0x00, 0xE0, 0x03, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x03,             // π pi
-    0x00, 0x00, 0xE0, 0x0F, 0x20, 0x02, 0x20, 0x02, 0xC0, 0x01,             // ρ rho
-    0x00, 0x04, 0x00, 0x03, 0xA0, 0x02, 0x40, 0x01,                         // ς final sigma
-    0x00, 0x00, 0x40, 0x02, 0xA0, 0x02, 0xA0, 0x02, 0xE0, 0x03,             // σ sigma
-    0x20, 0x00, 0xE0, 0x03, 0x20,                                           // τ tau
-    0x00, 0x00, 0xE0, 0x01, 0x00, 0x02, 0x00, 0x02, 0xE0, 0x03,             // υ upsilon
-    0x00, 0x00, 0xC0, 0x00, 0x20, 0x01, 0xE0, 0x03, 0x20, 0x01, 0xC0,       // φ phi
-    0x20, 0x02, 0x40, 0x01, 0x80, 0x00, 0x40, 0x01, 0x20, 0x02,             // χ chi
-    0x00, 0x00, 0x20, 0x00, 0xC0, 0x05, 0x20, 0x02, 0xE0, 0x03, 0x20,       // ψ psi
-    0x00, 0x00, 0x20, 0x02, 0xC0, 0x01, 0x20, 0x02, 0xC0, 0x01, 0x20, 0x02, // ω omega
-};
-
-// Placeholder for 16pt font - needs to be generated with font converter tool
-const uint8_t ArialMT_Plain_16_GR[] PROGMEM = {
-    0x10, // Width: 16
-    0x13, // Height: 19
-    0x20, // First Char: 32
-    0x01, // Number of chars: 1 (placeholder)
-    // Minimal placeholder - replace with full font data
-    0xFF, 0xFF, 0x00, 0x04, // 32 space
-    // Font Data:
-    // (empty placeholder)
-};
-
-// Placeholder for 24pt font - needs to be generated with font converter tool
-const uint8_t ArialMT_Plain_24_GR[] PROGMEM = {
-    0x18, // Width: 24
-    0x1C, // Height: 28
-    0x20, // First Char: 32
-    0x01, // Number of chars: 1 (placeholder)
-    // Minimal placeholder - replace with full font data
-    0xFF, 0xFF, 0x00, 0x06, // 32 space
-    // Font Data:
-    // (empty placeholder)
-};
-
-#endif // OLED_GR

src/graphics/fonts/OLEDDisplayFontsGR.h

@@ -1,22 +0,0 @@
-#ifndef OLEDDISPLAYFONTSGR_h
-#define OLEDDISPLAYFONTSGR_h
-
-#ifdef ARDUINO
-#include <Arduino.h>
-#elif __MBED__
-#define PROGMEM
-#endif
-
-/**
- * Localization for Greek language containing glyphs for the Greek alphabet.
- * Uses Windows-1253 (CP-1253) encoding for Greek characters.
- *
- * Supported characters:
- * - Uppercase Greek: Α-Ω (U+0391 to U+03A9)
- * - Lowercase Greek: α-ω (U+03B1 to U+03C9)
- * - Accented Greek: ά, έ, ή, ί, ό, ύ, ώ, etc.
- */
-extern const uint8_t ArialMT_Plain_10_GR[] PROGMEM;
-extern const uint8_t ArialMT_Plain_16_GR[] PROGMEM;
-extern const uint8_t ArialMT_Plain_24_GR[] PROGMEM;
-#endif

src/graphics/niche/Fonts/FreeSans12pt_Win1253.h

@@ -1,527 +0,0 @@
-// trunk-ignore-all(clang-format)
-#pragma once
-/* PROPERTIES
-
-FONT_NAME FreeSans12pt_Win1253
-*/
-const uint8_t FreeSans12pt_Win1253Bitmaps[] PROGMEM = {
-/* 0x01 */ 0x00, 0x30, 0x00, 0x09, 0x00, 0x01, 0x20, 0x00, 0x24, 0x00, 0x04, 0x80, 0x01, 0x90, 0x00, 0x62, 0x00, 0x30, 0xFE, 0x04, 0x10, 0x5F, 0x02, 0x0B, 0x00, 0x7F, 0xE0, 0x0C, 0x1C, 0x02, 0x83, 0x81, 0x9F, 0xF0, 0x02, 0x1E, 0x00, 0x41, 0xC0, 0x0E, 0x7F, 0x81, 0x78, 0x18, 0x62, 0x00, 0xFF, 0xC0,
-/* 0x02 */ 0x00, 0xFF, 0x80, 0x61, 0x13, 0xF0, 0x62, 0x60, 0x07, 0xFC, 0x00, 0x83, 0x80, 0x10, 0xF0, 0x33, 0xF6, 0x01, 0x41, 0xC0, 0x18, 0x38, 0x03, 0xFF, 0xE0, 0x47, 0x02, 0x08, 0x20, 0x61, 0xC4, 0x06, 0x17, 0x00, 0x22, 0x00, 0x02, 0x40, 0x00, 0x48, 0x00, 0x09, 0x00, 0x01, 0x20, 0x00, 0x3C, 0x00,
-/* 0x03 */ 0x01, 0xFC, 0x00, 0x38, 0x18, 0x02, 0x00, 0x30, 0x20, 0x00, 0xC2, 0x00, 0x02, 0x30, 0x00, 0x09, 0x04, 0x08, 0x48, 0x70, 0xE1, 0xC3, 0x87, 0x0E, 0x08, 0x10, 0x70, 0x00, 0x03, 0x80, 0x00, 0x14, 0x00, 0x00, 0xA1, 0x81, 0x8D, 0x87, 0xF0, 0x44, 0x00, 0x06, 0x30, 0x00, 0x60, 0xC0, 0x06, 0x03, 0x80, 0x60, 0x07, 0xFC, 0x00,
-/* 0x04 */ 0x01, 0xFC, 0x00, 0x38, 0x18, 0x02, 0x00, 0x30, 0x20, 0x00, 0xC2, 0x00, 0x02, 0x30, 0x00, 0x09, 0x10, 0x02, 0x48, 0xE0, 0x61, 0xC1, 0xCC, 0x0E, 0x78, 0x1C, 0x70, 0x00, 0x03, 0x80, 0x00, 0x14, 0xFF, 0xFC, 0xA6, 0x00, 0xCD, 0x9F, 0xFE, 0x44, 0x71, 0xE6, 0x30, 0xFC, 0x60, 0xC0, 0x06, 0x03, 0x80, 0x60, 0x07, 0xFC, 0x00,
-/* 0x05 */ 0x00, 0x18, 0x00, 0x00, 0x40, 0x01, 0x90, 0x01, 0xF4, 0x08, 0x12, 0x23, 0xC1, 0x91, 0x2C, 0x1C, 0x8A, 0xC3, 0x64, 0x64, 0x13, 0x22, 0x41, 0x98, 0x26, 0x2C, 0xC4, 0x22, 0x60, 0x42, 0x13, 0x04, 0x30, 0x80, 0x61, 0xA4, 0x02, 0x18, 0x20, 0x03, 0x41, 0x00, 0x20, 0x08, 0x02, 0x00, 0x60, 0x40, 0x03, 0xF8,
-/* 0x06 */ 0x00, 0x10, 0x00, 0x03, 0x00, 0x1C, 0x48, 0x00, 0xB4, 0x80, 0x09, 0xF9, 0xC0, 0xE0, 0xE4, 0x0C, 0x02, 0x8F, 0x80, 0x38, 0x88, 0x01, 0x0D, 0x00, 0x18, 0x30, 0x01, 0x60, 0x80, 0x13, 0x18, 0x03, 0xF2, 0xC0, 0x20, 0x26, 0x06, 0x07, 0xFF, 0xA0, 0x02, 0x39, 0x00, 0x14, 0x70, 0x01, 0xC3, 0x00, 0x18, 0x00,
-/* 0x07 */
-/* 0x08 */ 0x00, 0x1F, 0x80, 0x00, 0x60, 0x80, 0x01, 0x00, 0x80, 0x06, 0x00, 0x80, 0x3C, 0x01, 0x01, 0x8C, 0x02, 0x02, 0x08, 0x04, 0x04, 0x08, 0x0C, 0x38, 0x00, 0x04, 0x80, 0x00, 0x06, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x2E, 0xC0, 0x01, 0x83, 0x7E, 0x0C, 0x10, 0x37, 0xE2, 0x61, 0x00, 0x0C, 0xC6, 0x10, 0x98, 0x0C, 0x63, 0x00, 0x00, 0xC6, 0x00,
-/* 0x09 */ 0x00, 0x1F, 0x80, 0x00, 0x60, 0x80, 0x01, 0x00, 0x80, 0x06, 0x00, 0x80, 0x3C, 0x01, 0x01, 0x8C, 0x02, 0x02, 0x08, 0x04, 0x04, 0x08, 0x0C, 0x38, 0x00, 0x04, 0x80, 0x00, 0x06, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x2E, 0xC0, 0x01, 0x83, 0x7E, 0x0C, 0x00, 0x37, 0xE0,
-/* 0x0A */
-/* 0x0B */ 0x1F, 0x07, 0xC1, 0x86, 0x41, 0x10, 0x0C, 0x04, 0x80, 0x40, 0x18, 0x00, 0x00, 0xC0, 0x00, 0x06, 0x00, 0x00, 0x30, 0x00, 0x01, 0x40, 0x00, 0x0A, 0x00, 0x00, 0x88, 0x00, 0x04, 0x40, 0x00, 0x41, 0x00, 0x02, 0x04, 0x00, 0x20, 0x20, 0x02, 0x00, 0x80, 0x20, 0x02, 0x02, 0x00, 0x08, 0x20, 0x00, 0x22, 0x00, 0x00, 0xE0, 0x00,
-/* 0x0C */ 0x01, 0x00, 0x00, 0x38, 0x00, 0x04, 0xC0, 0x01, 0x08, 0x00, 0x18, 0x80, 0x1C, 0x10, 0x02, 0x07, 0x80, 0x81, 0x10, 0x1F, 0xC2, 0x02, 0x00, 0x60, 0x80, 0x1A, 0x20, 0x1C, 0x42, 0x1C, 0x08, 0xFE, 0x03, 0xA0, 0x01, 0x8C, 0x01, 0xC1, 0x43, 0xD0, 0x27, 0x81, 0xF8,
-/* 0x0D */
-/* 0x0E */ 0x00, 0xE0, 0x00, 0x11, 0x00, 0x01, 0x10, 0x00, 0x0B, 0x00, 0x03, 0xF8, 0x00, 0x60, 0x60, 0x09, 0x02, 0x00, 0xA0, 0x10, 0x16, 0x01, 0x01, 0x40, 0x10, 0x10, 0x01, 0x01, 0x00, 0x08, 0x10, 0x00, 0x82, 0x1F, 0x08, 0x3F, 0x90, 0x44, 0x00, 0x06, 0xBF, 0xFF, 0xAF, 0xF0, 0xFF, 0xFF, 0x0F, 0xE3, 0xFB, 0xFC,
-/* 0x0F */ 0x01, 0xFC, 0x00, 0x38, 0x18, 0x02, 0x00, 0x30, 0x20, 0x00, 0xC2, 0x40, 0x12, 0x34, 0x00, 0x69, 0x40, 0x01, 0x49, 0xE0, 0xF1, 0xCD, 0x06, 0x8E, 0x28, 0x14, 0x71, 0x40, 0xA3, 0x8B, 0xFD, 0x14, 0x50, 0x68, 0xA2, 0x81, 0x4D, 0x97, 0xFA, 0x44, 0xBF, 0xD6, 0x31, 0x02, 0xE0, 0xC8, 0x16, 0x08, 0x61, 0x08, 0x21, 0xF0, 0x80, 0xF8, 0x78, 0x00,
-/* 0x10 */ 0x00, 0xF0, 0x00, 0x3A, 0x00, 0x07, 0xC0, 0x00, 0xA8, 0x00, 0x1F, 0x00, 0x02, 0xB0, 0x00, 0x52, 0x00, 0x0A, 0x40, 0x02, 0x48, 0x00, 0x49, 0x00, 0x09, 0x30, 0x01, 0x22, 0x01, 0xC4, 0x70, 0xF0, 0x85, 0xE1, 0x10, 0x88, 0x37, 0x20, 0x03, 0x9C, 0x00, 0x37, 0x00, 0x06, 0x40, 0x01, 0x86, 0x00,
-/* 0x11 */ 0x01, 0xFC, 0x00, 0x38, 0x18, 0x02, 0x00, 0x30, 0x20, 0x00, 0xC2, 0x60, 0x02, 0x36, 0x00, 0x09, 0x04, 0x0C, 0x48, 0x60, 0xC1, 0xC3, 0x0F, 0x0E, 0x00, 0x08, 0x70, 0x00, 0x23, 0x80, 0x63, 0x84, 0x01, 0x9F, 0x20, 0x0C, 0xFD, 0x80, 0x27, 0xE4, 0x03, 0x3F, 0x30, 0x33, 0xE0, 0xC0, 0x00, 0x03, 0x80, 0x60, 0x07, 0xFC, 0x00,
-/* 0x12 */ 0x00, 0xC2, 0x00, 0x1C, 0x24, 0x02, 0x18, 0x60, 0x64, 0x02, 0x02, 0x40, 0x20, 0x00, 0xF2, 0x03, 0x89, 0xE0, 0x7C, 0x80, 0x0E, 0x25, 0x80, 0xE1, 0x00, 0x1A, 0x08, 0x71, 0xB0, 0xC4, 0x39, 0x84, 0xC2, 0xCC, 0x40, 0x76, 0x7C, 0x05, 0xBB, 0x80, 0x4C, 0xE0, 0x0A, 0x78, 0x00, 0x9C, 0x00, 0x0F, 0x00, 0x00,
-/* 0x13 */ 0x01, 0xFC, 0x00, 0x38, 0x18, 0x02, 0x00, 0x30, 0x20, 0x00, 0xC2, 0x00, 0x02, 0x30, 0x00, 0x09, 0x00, 0x00, 0x48, 0x60, 0xC1, 0xC6, 0xC9, 0x0E, 0x00, 0x00, 0x70, 0x00, 0x03, 0x80, 0x00, 0x14, 0xFF, 0xF8, 0xA6, 0x00, 0xCD, 0x9F, 0xFE, 0x44, 0x71, 0xE6, 0x30, 0xFC, 0x60, 0xC0, 0x06, 0x03, 0x80, 0x60, 0x07, 0xFC, 0x00,
-/* 0x14 */ 0x01, 0xFC, 0x00, 0x38, 0x18, 0x02, 0x00, 0x30, 0x20, 0x00, 0xC2, 0x20, 0x22, 0x33, 0x01, 0x89, 0x20, 0x02, 0x48, 0x60, 0xE1, 0xC8, 0x80, 0x8E, 0x46, 0x46, 0x72, 0x32, 0x33, 0x9F, 0x9F, 0x94, 0x78, 0x78, 0xA0, 0x00, 0x0D, 0x80, 0x00, 0x44, 0x0E, 0x06, 0x30, 0x00, 0x60, 0xC0, 0x06, 0x03, 0x80, 0x60, 0x07, 0xFC, 0x00,
-/* 0x15 */ 0x03, 0xFC, 0x20, 0x38, 0x1C, 0x81, 0x80, 0x1D, 0x08, 0x00, 0x32, 0x60, 0x00, 0x89, 0x00, 0x02, 0x18, 0x00, 0x08, 0x61, 0xC3, 0x22, 0x8D, 0x93, 0x72, 0x00, 0x00, 0x48, 0x00, 0x01, 0x20, 0x00, 0x04, 0x9F, 0xFF, 0x92, 0x60, 0x0E, 0x44, 0xFF, 0xF2, 0x11, 0xC3, 0x88, 0x21, 0xF8, 0x40, 0x40, 0x02, 0x00, 0xC0, 0x30, 0x00, 0xFF, 0x00,
-/* 0x16 */ 0x03, 0x80, 0x03, 0xC0, 0x01, 0xE0, 0x01, 0xE0, 0x03, 0xF0, 0x03, 0xF0, 0x27, 0xF0, 0x6F, 0x70, 0x6E, 0x60, 0xFC, 0x60, 0xFC, 0x7E, 0xFC, 0x7E, 0xFC, 0x3F, 0xF4, 0x1F, 0xF4, 0x1F, 0xF0, 0x0E, 0x70, 0x0E, 0x30, 0x1C, 0x38, 0x38, 0x0F, 0xF0,
-/* 0x17 */ 0x01, 0xFC, 0x00, 0x38, 0x18, 0x02, 0x00, 0x30, 0x20, 0x00, 0xC2, 0x00, 0x02, 0x30, 0x00, 0x09, 0x00, 0x00, 0x48, 0x00, 0x21, 0xC0, 0x02, 0x8E, 0x20, 0xF4, 0x70, 0x84, 0x11, 0x82, 0x40, 0x84, 0x01, 0x03, 0x20, 0x0F, 0x85, 0x80, 0x03, 0x04, 0x00, 0x04, 0x30, 0x78, 0x10, 0xC0, 0x06, 0x03, 0x80, 0x60, 0x07, 0xFC, 0x00,
-/* 0x18 */ 0x00, 0xFC, 0x00, 0x02, 0x06, 0x00, 0x08, 0x24, 0x00, 0x21, 0xA4, 0x00, 0x4C, 0x48, 0x00, 0xA0, 0x50, 0x01, 0x92, 0x60, 0x03, 0x24, 0xC0, 0x06, 0x01, 0x81, 0x28, 0x03, 0x49, 0x6C, 0xC4, 0xAD, 0xD8, 0x16, 0xA4, 0xCC, 0xC4, 0x44, 0x86, 0x13, 0x05, 0x00, 0x28, 0x0A, 0x00, 0x50, 0x14, 0x00, 0x90, 0x48, 0x01, 0x20, 0x90, 0x02, 0x41, 0x20, 0x00, 0x00,
-/* 0x19 */ 0x01, 0xFC, 0x00, 0x38, 0x18, 0x02, 0x00, 0x30, 0x20, 0x00, 0xC2, 0x00, 0x02, 0x30, 0x00, 0x09, 0x00, 0x00, 0x49, 0xC3, 0x81, 0xC0, 0x00, 0x0E, 0x78, 0xF0, 0x77, 0xEF, 0xC3, 0xA7, 0x4E, 0x15, 0x0A, 0x10, 0xA7, 0x8F, 0x0D, 0x80, 0x00, 0x44, 0x00, 0x06, 0x33, 0xF0, 0x60, 0xC0, 0x06, 0x03, 0x80, 0x60, 0x07, 0xFC, 0x00,
-/* 0x1A */ 0xFF, 0xFF, 0x00, 0x06, 0x00, 0x0C, 0x3E, 0x18, 0x82, 0x32, 0x02, 0x64, 0x04, 0xC8, 0x09, 0x80, 0x23, 0x00, 0x86, 0x02, 0x0C, 0x08, 0x18, 0x10, 0x30, 0x00, 0x60, 0x00, 0xC0, 0x81, 0x80, 0x03, 0x00, 0x07, 0xFF, 0xF8,
-/* 0x1B */ 0x00, 0xFE, 0x00, 0x03, 0x81, 0x80, 0x04, 0x00, 0x60, 0x08, 0x00, 0x30, 0x10, 0x00, 0x10, 0x30, 0x07, 0x88, 0x23, 0xC8, 0x08, 0x22, 0x00, 0x04, 0x60, 0x00, 0x44, 0x60, 0x00, 0x84, 0x63, 0x03, 0x04, 0x61, 0xFC, 0x04, 0x6B, 0x00, 0x9E, 0xA5, 0x01, 0x6A, 0xD5, 0x01, 0x43, 0xA8, 0x81, 0x05, 0xD0, 0x82, 0x0A, 0xA0, 0x82, 0x05, 0xC0, 0x82, 0x02, 0x61, 0xFF, 0x0C, 0x1E, 0x00, 0xF0,
-/* 0x1C */ 0x01, 0xFC, 0x00, 0x38, 0x18, 0x02, 0x00, 0x30, 0x20, 0x00, 0xC2, 0x30, 0x02, 0x32, 0x00, 0x09, 0x00, 0x00, 0x48, 0x20, 0x61, 0xC3, 0x84, 0x0E, 0x1C, 0x78, 0x70, 0x40, 0x03, 0x80, 0x00, 0x14, 0x00, 0x00, 0xA0, 0x03, 0x0D, 0x83, 0xF0, 0x44, 0x00, 0x06, 0x30, 0x00, 0x60, 0xC0, 0x06, 0x03, 0x80, 0x60, 0x07, 0xFC, 0x00,
-/* 0x1D */ 0x01, 0xFE, 0x00, 0x3A, 0x1C, 0x03, 0x00, 0x30, 0x23, 0x1E, 0xC3, 0x38, 0x03, 0x10, 0xC3, 0x09, 0x00, 0x18, 0x68, 0x00, 0xC1, 0x40, 0x00, 0x0A, 0x07, 0x80, 0x50, 0x46, 0x02, 0x80, 0x00, 0x1A, 0x1E, 0x00, 0xCB, 0x10, 0x0D, 0x03, 0x00, 0x48, 0x60, 0x06, 0x40, 0x00, 0x22, 0x0C, 0x02, 0x10, 0x60, 0x60, 0x43, 0xFC, 0x01, 0xE0, 0x00, 0x00,
-/* 0x1E */ 0x01, 0xF0, 0x00, 0xEA, 0xC0, 0x31, 0x5F, 0x04, 0x5F, 0x88, 0x80, 0xA0, 0x48, 0x0E, 0x02, 0x8F, 0x40, 0x3C, 0x10, 0x21, 0x66, 0x87, 0x15, 0x98, 0x71, 0x41, 0x02, 0x14, 0x00, 0x01, 0x40, 0x00, 0x14, 0x00, 0x01, 0x21, 0xFE, 0x12, 0x00, 0x02, 0x10, 0x00, 0x60, 0x80, 0x0C, 0x06, 0x01, 0x80, 0x3F, 0xE0,
-/* 0x1F */ 0x0E, 0x00, 0x13, 0x00, 0x23, 0x00, 0xF3, 0x01, 0x31, 0x01, 0x11, 0x03, 0xD3, 0x06, 0xF2, 0x30, 0x34, 0xC7, 0x25, 0x33, 0x2B, 0xC2, 0x57, 0x04, 0x3A, 0x08, 0x72, 0x30, 0xA3, 0xC3, 0x40, 0x04, 0x40, 0x18, 0x40, 0x60, 0x7F, 0x80,
-/* ' ' 0x20 */
-/* '!' 0x21 */ 0xFF, 0xFF, 0xFF, 0xF0, 0xF0,
-/* '"' 0x22 */ 0xCF, 0x3C, 0xF3, 0x8A, 0x20,
-/* '#' 0x23 */ 0x06, 0x30, 0x31, 0x03, 0x18, 0x18, 0xC7, 0xFF, 0xBF, 0xFC, 0x31, 0x01, 0x18, 0x18, 0xC7, 0xFF, 0xBF, 0xFC, 0x31, 0x01, 0x18, 0x18, 0xC0, 0xC6, 0x06, 0x30,
-/* '$' 0x24 */ 0x04, 0x03, 0xE1, 0xFF, 0x72, 0x7C, 0x47, 0x88, 0xF1, 0x07, 0xA0, 0x7E, 0x03, 0xF0, 0x17, 0x02, 0x7C, 0x47, 0x88, 0xF1, 0x1B, 0x26, 0x7F, 0xC3, 0xE0, 0x10, 0x02, 0x00,
-/* '%' 0x25 */ 0x00, 0x06, 0x03, 0xC0, 0x40, 0x7E, 0x0C, 0x0E, 0x70, 0x80, 0xC3, 0x18, 0x0C, 0x31, 0x00, 0xE7, 0x30, 0x07, 0xE6, 0x00, 0x3C, 0x40, 0x00, 0x0C, 0x7C, 0x00, 0x8F, 0xE0, 0x19, 0xC7, 0x01, 0x18, 0x30, 0x31, 0x83, 0x02, 0x1C, 0x70, 0x40, 0xFE, 0x04, 0x07, 0xC0,
-/* '&' 0x26 */ 0x0F, 0x00, 0x7E, 0x03, 0x9C, 0x0C, 0x30, 0x30, 0xC0, 0xE7, 0x01, 0xF8, 0x03, 0x80, 0x3E, 0x01, 0xCC, 0x6E, 0x39, 0xB0, 0x7C, 0xC0, 0xF3, 0x03, 0xCE, 0x1F, 0x9F, 0xE6, 0x3E, 0x1C,
-/* ''' 0x27 */ 0xFF, 0xA0,
-/* '(' 0x28 */ 0x08, 0x8C, 0x46, 0x31, 0x98, 0xC6, 0x31, 0x8C, 0x63, 0x08, 0x63, 0x08, 0x61, 0x0C, 0x20,
-/* ')' 0x29 */ 0x82, 0x18, 0xC3, 0x18, 0xC3, 0x18, 0xC6, 0x31, 0x8C, 0x62, 0x31, 0x88, 0xC4, 0x62, 0x00,
-/* '*' 0x2A */ 0x10, 0x23, 0x5B, 0xE3, 0x8D, 0x91, 0x00,
-/* '+' 0x2B */ 0x0C, 0x03, 0x00, 0xC0, 0x30, 0xFF, 0xFF, 0xF0, 0xC0, 0x30, 0x0C, 0x03, 0x00, 0xC0,
-/* ',' 0x2C */ 0xF5, 0x60,
-/* '-' 0x2D */ 0xFF, 0xF0,
-/* '.' 0x2E */ 0xF0,
-/* '/' 0x2F */ 0x02, 0x0C, 0x10, 0x20, 0xC1, 0x02, 0x0C, 0x10, 0x20, 0xC1, 0x02, 0x0C, 0x10, 0x20, 0xC1, 0x00,
-/* '0' 0x30 */ 0x1F, 0x07, 0xF1, 0xC7, 0x30, 0x6C, 0x0F, 0x80, 0xF0, 0x1E, 0x03, 0xC0, 0x78, 0x0F, 0x01, 0xE0, 0x3E, 0x0E, 0xC1, 0x9C, 0x71, 0xFC, 0x1F, 0x00,
-/* '1' 0x31 */ 0x08, 0xCF, 0xFF, 0x8C, 0x63, 0x18, 0xC6, 0x31, 0x8C, 0x63, 0x18,
-/* '2' 0x32 */ 0x1F, 0x0F, 0xF9, 0x87, 0x60, 0x7C, 0x06, 0x00, 0xC0, 0x18, 0x07, 0x01, 0xC0, 0xF0, 0x78, 0x1C, 0x06, 0x00, 0xC0, 0x30, 0x07, 0xFF, 0xFF, 0xE0,
-/* '3' 0x33 */ 0x3F, 0x0F, 0xF3, 0x87, 0x60, 0x6C, 0x0C, 0x01, 0x80, 0x60, 0x78, 0x0F, 0x80, 0x18, 0x01, 0x80, 0x3C, 0x07, 0x80, 0xD8, 0x73, 0xFC, 0x3F, 0x00,
-/* '4' 0x34 */ 0x01, 0x80, 0x70, 0x0E, 0x03, 0xC0, 0xD8, 0x1B, 0x06, 0x61, 0x8C, 0x21, 0x8C, 0x33, 0x06, 0x7F, 0xFF, 0xFE, 0x03, 0x00, 0x60, 0x0C, 0x01, 0x80,
-/* '5' 0x35 */ 0x3F, 0xCF, 0xF9, 0x80, 0x30, 0x06, 0x00, 0xDE, 0x1F, 0xE7, 0x0E, 0x00, 0xE0, 0x0C, 0x01, 0x80, 0x30, 0x07, 0x81, 0xB8, 0x73, 0xFC, 0x1F, 0x00,
-/* '6' 0x36 */ 0x0F, 0x07, 0xF9, 0xC3, 0x30, 0x74, 0x01, 0x80, 0x33, 0xC7, 0xFE, 0xF1, 0xDC, 0x1F, 0x01, 0xE0, 0x3C, 0x06, 0xC1, 0xDC, 0x71, 0xFC, 0x1F, 0x00,
-/* '7' 0x37 */ 0xFF, 0xFF, 0xFC, 0x01, 0x00, 0x60, 0x18, 0x02, 0x00, 0xC0, 0x30, 0x06, 0x01, 0x80, 0x30, 0x04, 0x01, 0x80, 0x30, 0x06, 0x01, 0x80, 0x30, 0x00,
-/* '8' 0x38 */ 0x1F, 0x07, 0xF1, 0xC7, 0x30, 0x66, 0x0C, 0xC1, 0x8C, 0x61, 0xF8, 0x3F, 0x8E, 0x3B, 0x01, 0xE0, 0x3C, 0x07, 0x80, 0xD8, 0x31, 0xFC, 0x1F, 0x00,
-/* '9' 0x39 */ 0x1F, 0x07, 0xF1, 0xC7, 0x70, 0x6C, 0x07, 0x80, 0xF0, 0x1E, 0x07, 0x61, 0xEF, 0xFC, 0x79, 0x80, 0x30, 0x05, 0xC1, 0x98, 0x73, 0xFC, 0x1E, 0x00,
-/* ':' 0x3A */ 0xF0, 0x00, 0x03, 0xC0,
-/* ';' 0x3B */ 0xF0, 0x00, 0x0F, 0x56,
-/* '<' 0x3C */ 0x00, 0x70, 0x1E, 0x0F, 0x83, 0xC0, 0xF0, 0x0E, 0x00, 0x7C, 0x00, 0xF0, 0x03, 0xC0, 0x0F, 0x00, 0x10,
-/* '=' 0x3D */ 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0xFF,
-/* '>' 0x3E */ 0xE0, 0x07, 0x80, 0x1F, 0x00, 0x7C, 0x00, 0xF0, 0x07, 0x01, 0xE0, 0xF0, 0x3C, 0x0F, 0x00, 0x80, 0x00,
-/* '?' 0x3F */ 0x3F, 0x1F, 0xEE, 0x1F, 0x03, 0xC0, 0xC0, 0x30, 0x0C, 0x06, 0x03, 0x81, 0xC0, 0xE0, 0x30, 0x0C, 0x03, 0x00, 0x00, 0x00, 0x0C, 0x03, 0x00,
-/* '@' 0x40 */ 0x00, 0xFE, 0x00, 0x0F, 0xFE, 0x00, 0xF0, 0x3E, 0x07, 0x00, 0x3C, 0x38, 0x00, 0x38, 0xC1, 0xE0, 0x66, 0x0F, 0xD9, 0xD8, 0x61, 0xC3, 0xC3, 0x07, 0x0F, 0x1C, 0x1C, 0x3C, 0x60, 0x60, 0xF1, 0x81, 0x83, 0xC6, 0x06, 0x1B, 0x18, 0x38, 0xEE, 0x71, 0xE7, 0x18, 0xFD, 0xF8, 0x71, 0xE7, 0xC0, 0xE0, 0x00, 0x01, 0xE0, 0x00, 0x01, 0xFF, 0xC0, 0x01, 0xFC, 0x00,
-/* 'A' 0x41 */ 0x07, 0x80, 0x1E, 0x00, 0x78, 0x03, 0xF0, 0x0C, 0xC0, 0x33, 0x01, 0xCE, 0x06, 0x18, 0x18, 0x60, 0xE1, 0xC3, 0x03, 0x0F, 0xFC, 0x7F, 0xF9, 0x80, 0x66, 0x01, 0xB8, 0x07, 0xC0, 0x0F, 0x00, 0x30,
-/* 'B' 0x42 */ 0xFF, 0xC7, 0xFF, 0x30, 0x1D, 0x80, 0x6C, 0x03, 0x60, 0x1B, 0x00, 0xD8, 0x0C, 0xFF, 0xC7, 0xFF, 0x30, 0x0D, 0x80, 0x3C, 0x01, 0xE0, 0x0F, 0x00, 0x78, 0x06, 0xFF, 0xF7, 0xFE, 0x00,
-/* 'C' 0x43 */ 0x07, 0xE0, 0x3F, 0xF0, 0xE0, 0x73, 0x80, 0x76, 0x00, 0x6C, 0x00, 0x30, 0x00, 0x60, 0x00, 0xC0, 0x01, 0x80, 0x03, 0x00, 0x06, 0x00, 0x0E, 0x00, 0x6C, 0x00, 0xDC, 0x03, 0x1E, 0x0E, 0x1F, 0xF8, 0x0F, 0xC0,
-/* 'D' 0x44 */ 0xFF, 0xC3, 0xFF, 0x8C, 0x07, 0x30, 0x0E, 0xC0, 0x1B, 0x00, 0x7C, 0x00, 0xF0, 0x03, 0xC0, 0x0F, 0x00, 0x3C, 0x00, 0xF0, 0x03, 0xC0, 0x1F, 0x00, 0x6C, 0x03, 0xB0, 0x1C, 0xFF, 0xE3, 0xFE, 0x00,
-/* 'E' 0x45 */ 0xFF, 0xFF, 0xFF, 0xC0, 0x0C, 0x00, 0xC0, 0x0C, 0x00, 0xC0, 0x0C, 0x00, 0xFF, 0xEF, 0xFE, 0xC0, 0x0C, 0x00, 0xC0, 0x0C, 0x00, 0xC0, 0x0C, 0x00, 0xFF, 0xFF, 0xFF,
-/* 'F' 0x46 */ 0xFF, 0xFF, 0xFF, 0x00, 0x60, 0x0C, 0x01, 0x80, 0x30, 0x06, 0x00, 0xFF, 0xDF, 0xFB, 0x00, 0x60, 0x0C, 0x01, 0x80, 0x30, 0x06, 0x00, 0xC0, 0x18, 0x00,
-/* 'G' 0x47 */ 0x07, 0xF0, 0x1F, 0xFC, 0x3C, 0x1E, 0x70, 0x07, 0x60, 0x03, 0xE0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x7F, 0xC0, 0x7F, 0xC0, 0x03, 0xC0, 0x03, 0x60, 0x03, 0x60, 0x07, 0x30, 0x0F, 0x3C, 0x1F, 0x1F, 0xFB, 0x07, 0xE1,
-/* 'H' 0x48 */ 0xC0, 0x1E, 0x00, 0xF0, 0x07, 0x80, 0x3C, 0x01, 0xE0, 0x0F, 0x00, 0x78, 0x03, 0xFF, 0xFF, 0xFF, 0xF0, 0x07, 0x80, 0x3C, 0x01, 0xE0, 0x0F, 0x00, 0x78, 0x03, 0xC0, 0x1E, 0x00, 0xC0,
-/* 'I' 0x49 */ 0xFF, 0xFF, 0xFF, 0xFF, 0xF0,
-/* 'J' 0x4A */ 0x01, 0x80, 0xC0, 0x60, 0x30, 0x18, 0x0C, 0x06, 0x03, 0x01, 0x80, 0xC0, 0x60, 0x3C, 0x1E, 0x0F, 0x07, 0xC7, 0x7F, 0x1F, 0x00,
-/* 'K' 0x4B */ 0xC0, 0x3E, 0x03, 0xB0, 0x39, 0x83, 0x8C, 0x38, 0x63, 0x83, 0x38, 0x19, 0xC0, 0xDE, 0x07, 0xB8, 0x38, 0xE1, 0x83, 0x0C, 0x1C, 0x60, 0x73, 0x01, 0x98, 0x0E, 0xC0, 0x3E, 0x00, 0xC0,
-/* 'L' 0x4C */ 0xC0, 0x30, 0x0C, 0x03, 0x00, 0xC0, 0x30, 0x0C, 0x03, 0x00, 0xC0, 0x30, 0x0C, 0x03, 0x00, 0xC0, 0x30, 0x0C, 0x03, 0x00, 0xFF, 0xFF, 0xF0,
-/* 'M' 0x4D */ 0xE0, 0x07, 0xE0, 0x07, 0xF0, 0x0F, 0xF0, 0x0F, 0xD0, 0x0F, 0xD8, 0x1B, 0xD8, 0x1B, 0xD8, 0x1B, 0xCC, 0x33, 0xCC, 0x33, 0xCC, 0x33, 0xC6, 0x63, 0xC6, 0x63, 0xC6, 0x63, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC1, 0x83,
-/* 'N' 0x4E */ 0xE0, 0x1F, 0x00, 0xFC, 0x07, 0xE0, 0x3D, 0x81, 0xEE, 0x0F, 0x30, 0x79, 0xC3, 0xC6, 0x1E, 0x18, 0xF0, 0xE7, 0x83, 0x3C, 0x1D, 0xE0, 0x6F, 0x01, 0xF8, 0x0F, 0xC0, 0x3E, 0x01, 0xC0,
-/* 'O' 0x4F */ 0x07, 0xF0, 0x0F, 0xFE, 0x0F, 0x07, 0x86, 0x00, 0xC6, 0x00, 0x33, 0x00, 0x1B, 0x00, 0x07, 0x80, 0x03, 0xC0, 0x01, 0xE0, 0x00, 0xF0, 0x00, 0x78, 0x00, 0x36, 0x00, 0x33, 0x00, 0x18, 0xC0, 0x18, 0x78, 0x3C, 0x1F, 0xFC, 0x03, 0xF8, 0x00,
-/* 'P' 0x50 */ 0xFF, 0x8F, 0xFE, 0xC0, 0x6C, 0x03, 0xC0, 0x3C, 0x03, 0xC0, 0x3C, 0x06, 0xFF, 0xEF, 0xFC, 0xC0, 0x0C, 0x00, 0xC0, 0x0C, 0x00, 0xC0, 0x0C, 0x00, 0xC0, 0x0C, 0x00,
-/* 'Q' 0x51 */ 0x07, 0xF0, 0x0F, 0xFE, 0x0F, 0x07, 0x86, 0x00, 0xC6, 0x00, 0x33, 0x00, 0x1B, 0x00, 0x07, 0x80, 0x03, 0xC0, 0x01, 0xE0, 0x00, 0xF0, 0x00, 0x78, 0x00, 0x36, 0x00, 0x33, 0x01, 0x98, 0xC0, 0xFC, 0x78, 0x3C, 0x1F, 0xFF, 0x03, 0xF9, 0x80, 0x00, 0x40,
-/* 'R' 0x52 */ 0xFF, 0xE3, 0xFF, 0xCC, 0x03, 0xB0, 0x06, 0xC0, 0x1B, 0x00, 0x6C, 0x01, 0xB0, 0x0C, 0xFF, 0xE3, 0xFF, 0xCC, 0x03, 0xB0, 0x06, 0xC0, 0x1B, 0x00, 0x6C, 0x01, 0xB0, 0x06, 0xC0, 0x1B, 0x00, 0x70,
-/* 'S' 0x53 */ 0x0F, 0xE0, 0x7F, 0xC3, 0x83, 0x98, 0x07, 0x60, 0x0D, 0x80, 0x07, 0x00, 0x1E, 0x00, 0x3F, 0x80, 0x3F, 0xC0, 0x0F, 0x80, 0x07, 0xC0, 0x0F, 0x00, 0x3E, 0x00, 0xDE, 0x0E, 0x3F, 0xF0, 0x3F, 0x80,
-/* 'T' 0x54 */ 0xFF, 0xFF, 0xFF, 0x06, 0x00, 0x60, 0x06, 0x00, 0x60, 0x06, 0x00, 0x60, 0x06, 0x00, 0x60, 0x06, 0x00, 0x60, 0x06, 0x00, 0x60, 0x06, 0x00, 0x60, 0x06, 0x00, 0x60,
-/* 'U' 0x55 */ 0xC0, 0x1E, 0x00, 0xF0, 0x07, 0x80, 0x3C, 0x01, 0xE0, 0x0F, 0x00, 0x78, 0x03, 0xC0, 0x1E, 0x00, 0xF0, 0x07, 0x80, 0x3C, 0x01, 0xE0, 0x0F, 0x80, 0xEE, 0x0E, 0x3F, 0xE0, 0xFC, 0x00,
-/* 'V' 0x56 */ 0xC0, 0x0F, 0x00, 0x7E, 0x01, 0x98, 0x06, 0x60, 0x39, 0xC0, 0xC3, 0x03, 0x0C, 0x1C, 0x38, 0x60, 0x61, 0x81, 0x8E, 0x07, 0x30, 0x0C, 0xC0, 0x37, 0x00, 0xF8, 0x01, 0xE0, 0x07, 0x80, 0x1C, 0x00,
-/* 'W' 0x57 */ 0xE0, 0x30, 0x1D, 0x80, 0xE0, 0x76, 0x07, 0x81, 0xDC, 0x1E, 0x06, 0x70, 0x7C, 0x18, 0xC1, 0xB0, 0xE3, 0x0C, 0xC3, 0x8C, 0x33, 0x0C, 0x38, 0xC6, 0x30, 0x67, 0x18, 0xC1, 0x98, 0x67, 0x06, 0x61, 0xD8, 0x1D, 0x83, 0x60, 0x3C, 0x0D, 0x80, 0xF0, 0x3E, 0x03, 0xC0, 0x70, 0x0F, 0x01, 0xC0, 0x18, 0x07, 0x00,
-/* 'X' 0x58 */ 0xE0, 0x1D, 0x80, 0xE7, 0x03, 0x0E, 0x1C, 0x18, 0x60, 0x73, 0x00, 0xFC, 0x01, 0xE0, 0x07, 0x00, 0x1E, 0x00, 0xF8, 0x03, 0x30, 0x1C, 0xE0, 0xE1, 0x83, 0x07, 0x1C, 0x0E, 0xE0, 0x1B, 0x00, 0x70,
-/* 'Y' 0x59 */ 0xC0, 0x0F, 0x80, 0x76, 0x01, 0x9C, 0x0C, 0x38, 0x70, 0x61, 0x81, 0xCE, 0x03, 0x30, 0x0F, 0x80, 0x1E, 0x00, 0x30, 0x00, 0xC0, 0x03, 0x00, 0x0C, 0x00, 0x30, 0x00, 0xC0, 0x03, 0x00, 0x0C, 0x00,
-/* 'Z' 0x5A */ 0xFF, 0xFF, 0xFF, 0xC0, 0x0E, 0x00, 0xE0, 0x0E, 0x00, 0x60, 0x07, 0x00, 0x70, 0x07, 0x00, 0x30, 0x03, 0x80, 0x38, 0x03, 0x80, 0x18, 0x01, 0xC0, 0x1C, 0x00, 0xFF, 0xFF, 0xFF, 0xC0,
-/* '[' 0x5B */ 0xFF, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCF, 0xF0,
-/* '\' 0x5C */ 0x81, 0x81, 0x02, 0x06, 0x04, 0x08, 0x18, 0x10, 0x20, 0x60, 0x40, 0x81, 0x81, 0x02, 0x06, 0x04,
-/* ']' 0x5D */ 0xFF, 0x33, 0x33, 0x33, 0x33, 0x33, 0x33, 0x33, 0x33, 0x33, 0x3F, 0xF0,
-/* '^' 0x5E */ 0x0C, 0x0E, 0x05, 0x86, 0xC3, 0x21, 0x19, 0x8C, 0x83, 0xC1, 0x80,
-/* '_' 0x5F */ 0xFF, 0xFE,
-/* '`' 0x60 */ 0xE3, 0x8C, 0x30,
-/* 'a' 0x61 */ 0x3F, 0x07, 0xF8, 0xE1, 0xCC, 0x0C, 0x00, 0xC0, 0x1C, 0x3F, 0xCF, 0x8C, 0xC0, 0xCC, 0x0C, 0xE3, 0xC7, 0xEF, 0x3C, 0x70,
-/* 'b' 0x62 */ 0xC0, 0x0C, 0x00, 0xC0, 0x0C, 0x00, 0xC0, 0x0C, 0xF8, 0xDF, 0xCF, 0x0E, 0xE0, 0x7C, 0x03, 0xC0, 0x3C, 0x03, 0xC0, 0x3C, 0x03, 0xE0, 0x6F, 0x0E, 0xDF, 0xCC, 0xF8,
-/* 'c' 0x63 */ 0x1F, 0x0F, 0xE6, 0x1F, 0x83, 0xC0, 0x30, 0x0C, 0x03, 0x00, 0xC0, 0x38, 0x37, 0x1C, 0xFE, 0x1F, 0x00,
-/* 'd' 0x64 */ 0x00, 0x60, 0x0C, 0x01, 0x80, 0x30, 0x06, 0x3C, 0xCF, 0xFB, 0x8F, 0xE0, 0xF8, 0x0F, 0x01, 0xE0, 0x3C, 0x07, 0x80, 0xF8, 0x3B, 0x8F, 0x3F, 0x63, 0xCC,
-/* 'e' 0x65 */ 0x1F, 0x07, 0xF1, 0xC7, 0x70, 0x3C, 0x07, 0xFF, 0xFF, 0xFE, 0x00, 0xC0, 0x1C, 0x0D, 0xC3, 0x1F, 0xC1, 0xF0,
-/* 'f' 0x66 */ 0x3B, 0xD8, 0xC6, 0x7F, 0xEC, 0x63, 0x18, 0xC6, 0x31, 0x8C, 0x63, 0x00,
-/* 'g' 0x67 */ 0x1E, 0x67, 0xFD, 0xC7, 0xF0, 0x7C, 0x07, 0x80, 0xF0, 0x1E, 0x03, 0xC0, 0x7C, 0x1D, 0xC7, 0x9F, 0xB1, 0xE6, 0x00, 0xC0, 0x3E, 0x0E, 0x7F, 0xC7, 0xE0,
-/* 'h' 0x68 */ 0xC0, 0x30, 0x0C, 0x03, 0x00, 0xC0, 0x33, 0xCD, 0xFB, 0xC7, 0xE0, 0xF0, 0x3C, 0x0F, 0x03, 0xC0, 0xF0, 0x3C, 0x0F, 0x03, 0xC0, 0xF0, 0x30,
-/* 'i' 0x69 */ 0xF0, 0x3F, 0xFF, 0xFF, 0xF0,
-/* 'j' 0x6A */ 0x33, 0x00, 0x03, 0x33, 0x33, 0x33, 0x33, 0x33, 0x33, 0x33, 0x3F, 0xE0,
-/* 'k' 0x6B */ 0xC0, 0x30, 0x0C, 0x03, 0x00, 0xC0, 0x30, 0x6C, 0x33, 0x18, 0xCC, 0x37, 0x0F, 0xC3, 0xB8, 0xC6, 0x31, 0xCC, 0x3B, 0x06, 0xC1, 0xF0, 0x30,
-/* 'l' 0x6C */ 0xFF, 0xFF, 0xFF, 0xFF, 0xF0,
-/* 'm' 0x6D */ 0xCF, 0x1F, 0x6F, 0xDF, 0xFC, 0x78, 0xFC, 0x18, 0x3C, 0x0C, 0x1E, 0x06, 0x0F, 0x03, 0x07, 0x81, 0x83, 0xC0, 0xC1, 0xE0, 0x60, 0xF0, 0x30, 0x78, 0x18, 0x3C, 0x0C, 0x18,
-/* 'n' 0x6E */ 0xCF, 0x37, 0xEF, 0x1F, 0x83, 0xC0, 0xF0, 0x3C, 0x0F, 0x03, 0xC0, 0xF0, 0x3C, 0x0F, 0x03, 0xC0, 0xC0,
-/* 'o' 0x6F */ 0x1F, 0x07, 0xF1, 0xC7, 0x70, 0x7C, 0x07, 0x80, 0xF0, 0x1E, 0x03, 0xC0, 0x7C, 0x1D, 0xC7, 0x1F, 0xC1, 0xF0,
-/* 'p' 0x70 */ 0xCF, 0x8D, 0xFC, 0xF0, 0xEE, 0x06, 0xC0, 0x3C, 0x03, 0xC0, 0x3C, 0x03, 0xC0, 0x3E, 0x06, 0xF0, 0xEF, 0xFC, 0xCF, 0x8C, 0x00, 0xC0, 0x0C, 0x00, 0xC0, 0x00,
-/* 'q' 0x71 */ 0x1E, 0x67, 0xFD, 0xC7, 0xF0, 0x7C, 0x07, 0x80, 0xF0, 0x1E, 0x03, 0xC0, 0x7C, 0x1D, 0xC7, 0x9F, 0xF1, 0xE6, 0x00, 0xC0, 0x18, 0x03, 0x00, 0x60,
-/* 'r' 0x72 */ 0xCF, 0x7F, 0x38, 0xC3, 0x0C, 0x30, 0xC3, 0x0C, 0x30, 0xC0,
-/* 's' 0x73 */ 0x3E, 0x1F, 0xEE, 0x1B, 0x00, 0xC0, 0x3C, 0x07, 0xF0, 0x3F, 0x01, 0xF0, 0x3E, 0x1D, 0xFE, 0x3F, 0x00,
-/* 't' 0x74 */ 0x63, 0x19, 0xFF, 0xB1, 0x8C, 0x63, 0x18, 0xC6, 0x31, 0xE7,
-/* 'u' 0x75 */ 0xC0, 0xF0, 0x3C, 0x0F, 0x03, 0xC0, 0xF0, 0x3C, 0x0F, 0x03, 0xC0, 0xF0, 0x7E, 0x3D, 0xFB, 0x3C, 0xC0,
-/* 'v' 0x76 */ 0xE0, 0x6C, 0x0D, 0x81, 0xB8, 0x63, 0x0C, 0x61, 0x8E, 0x60, 0xCC, 0x19, 0x83, 0xE0, 0x3C, 0x07, 0x00, 0xE0,
-/* 'w' 0x77 */ 0xC1, 0xC1, 0xB0, 0xE1, 0xD8, 0x70, 0xCC, 0x2C, 0x66, 0x36, 0x31, 0x9B, 0x18, 0xCD, 0x98, 0x64, 0x6C, 0x16, 0x36, 0x0F, 0x1A, 0x07, 0x8F, 0x03, 0x83, 0x80, 0xC1, 0xC0,
-/* 'x' 0x78 */ 0xC1, 0xF8, 0x66, 0x30, 0xCC, 0x3E, 0x07, 0x00, 0xC0, 0x78, 0x36, 0x0C, 0xC6, 0x3B, 0x06, 0xC0, 0xC0,
-/* 'y' 0x79 */ 0xE0, 0x6C, 0x0D, 0x83, 0x38, 0x63, 0x0C, 0x63, 0x0C, 0x60, 0xCC, 0x1B, 0x03, 0x60, 0x3C, 0x07, 0x00, 0xE0, 0x18, 0x03, 0x00, 0xE0, 0x78, 0x0E, 0x00,
-/* 'z' 0x7A */ 0xFF, 0xFF, 0xF0, 0x18, 0x0C, 0x07, 0x03, 0x81, 0xC0, 0x60, 0x30, 0x18, 0x0E, 0x03, 0xFF, 0xFF, 0xC0,
-/* '{' 0x7B */ 0x19, 0xCC, 0x63, 0x18, 0xC6, 0x31, 0x99, 0x86, 0x18, 0xC6, 0x31, 0x8C, 0x63, 0x1C, 0x60,
-/* '|' 0x7C */ 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC,
-/* '}' 0x7D */ 0xC7, 0x18, 0xC6, 0x31, 0x8C, 0x63, 0x0C, 0x33, 0x31, 0x8C, 0x63, 0x18, 0xC6, 0x73, 0x00,
-/* '~' 0x7E */ 0x70, 0x3E, 0x09, 0xE4, 0x1F, 0x03, 0x80,
-/* 0x7F */
-/* 0x80 */ 0x01, 0xF0, 0x1F, 0xF0, 0xE0, 0xC7, 0x00, 0x18, 0x00, 0xC0, 0x07, 0xFF, 0x3F, 0xFC, 0x30, 0x01, 0xFF, 0x8F, 0xFC, 0x0C, 0x00, 0x18, 0x00, 0x70, 0x00, 0xE0, 0x81, 0xFE, 0x03, 0xF0,
-/* 0x81 */
-/* 0x82 */ 0xF5, 0x80,
-/* 0x83 */ 0x1C, 0xF3, 0x0C, 0x31, 0xF7, 0xCC, 0x30, 0xC3, 0x0C, 0x30, 0xC3, 0x0C, 0x30, 0xC3, 0x0C, 0x33, 0xCE, 0x00,
-/* 0x84 */ 0xCF, 0x34, 0x51, 0x88,
-/* 0x85 */ 0xC6, 0x3C, 0x63,
-/* 0x86 */ 0x0C, 0x03, 0x00, 0xC0, 0x30, 0x0C, 0x3F, 0xFF, 0xFC, 0x30, 0x0C, 0x03, 0x00, 0xC0, 0x30, 0x0C, 0x03, 0x00, 0xC0, 0x30, 0x0C, 0x03, 0x00, 0xC0, 0x30, 0x0C, 0x00,
-/* 0x87 */ 0x0C, 0x03, 0x00, 0xC0, 0x30, 0x0C, 0x3F, 0xFF, 0xFC, 0x30, 0x0C, 0x03, 0x00, 0xC0, 0x30, 0x0C, 0x03, 0x0F, 0xFF, 0xFF, 0x0C, 0x03, 0x00, 0xC0, 0x30,
-/* 0x88 */ 0x38, 0xD9, 0xB6, 0x30,
-/* 0x89 */ 0x38, 0x18, 0x00, 0xF8, 0x30, 0x03, 0x18, 0xC0, 0x04, 0x11, 0x80, 0x0C, 0x66, 0x00, 0x0F, 0x8C, 0x00, 0x0E, 0x30, 0x00, 0x00, 0x40, 0x00, 0x01, 0x80, 0x00, 0x06, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x31, 0xC0, 0xE0, 0x67, 0xC3, 0xC1, 0x98, 0xCC, 0xC3, 0x20, 0x90, 0x8C, 0x63, 0x33, 0x10, 0x7C, 0x3C, 0x60, 0x70, 0x38,
-/* 0x8A */ 0x0C, 0x40, 0x1F, 0x00, 0x38, 0x03, 0xF8, 0x1F, 0xF0, 0xE0, 0xE6, 0x01, 0xD8, 0x03, 0x60, 0x01, 0xC0, 0x07, 0x80, 0x0F, 0xE0, 0x0F, 0xF0, 0x03, 0xE0, 0x01, 0xF0, 0x03, 0xC0, 0x0F, 0x80, 0x37, 0x83, 0x8F, 0xFC, 0x0F, 0xE0,
-/* 0x8B */ 0x2F, 0x49, 0x99,
-/* 0x8C */ 0x07, 0xCF, 0xFC, 0x7F, 0xFF, 0xF3, 0x83, 0xC0, 0x18, 0x07, 0x00, 0x60, 0x0C, 0x03, 0x00, 0x30, 0x0C, 0x00, 0xC0, 0x30, 0x03, 0x00, 0xC0, 0x0F, 0xFF, 0x00, 0x3F, 0xFC, 0x00, 0xC0, 0x30, 0x03, 0x00, 0xC0, 0x0C, 0x01, 0x80, 0x30, 0x07, 0x01, 0xC0, 0x0E, 0x0F, 0x00, 0x1F, 0xEF, 0xFC, 0x1F, 0x3F, 0xF0,
-/* 0x8D */
-/* 0x8E */ 0x0C, 0xC0, 0x3C, 0x00, 0xE1, 0xFF, 0xFF, 0xFF, 0x80, 0x1C, 0x01, 0xC0, 0x1C, 0x00, 0xC0, 0x0E, 0x00, 0xE0, 0x0E, 0x00, 0x60, 0x07, 0x00, 0x70, 0x07, 0x00, 0x30, 0x03, 0x80, 0x38, 0x01, 0xFF, 0xFF, 0xFF, 0x80,
-/* 0x8F */
-/* 0x90 */
-/* 0x91 */ 0x6A, 0xF0,
-/* 0x92 */ 0xF5, 0x60,
-/* 0x93 */ 0x4E, 0x28, 0xA2, 0xCF, 0x30,
-/* 0x94 */ 0xCF, 0x34, 0x51, 0x4E, 0x20,
-/* 0x95 */ 0x7B, 0xFF, 0xFF, 0xFD, 0xE0,
-/* 0x96 */ 0xFF, 0xFF, 0xF0,
-/* 0x97 */ 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xF0,
-/* 0x98 */ 0x63, 0xFE, 0x70,
-/* 0x99 */ 0xFF, 0x70, 0x1F, 0xFD, 0xC0, 0x71, 0x87, 0x83, 0xC6, 0x1E, 0x0F, 0x18, 0x68, 0x3C, 0x61, 0xB1, 0xB1, 0x86, 0xC6, 0xC6, 0x19, 0x1B, 0x18, 0x66, 0xCC, 0x61, 0x9B, 0x31, 0x86, 0x3C, 0xC6, 0x18, 0xE3, 0x18, 0x63, 0x8C,
-/* 0x9A */ 0x63, 0x0D, 0x83, 0x60, 0x70, 0x00, 0x0F, 0x87, 0xFB, 0x86, 0xC0, 0x30, 0x0F, 0x01, 0xFC, 0x0F, 0xC0, 0x7C, 0x0F, 0x87, 0x7F, 0x8F, 0xC0,
-/* 0x9B */ 0x99, 0x92, 0xF4,
-/* 0x9C */ 0x1F, 0x0F, 0x83, 0xF9, 0xFC, 0x71, 0xF8, 0x6E, 0x0F, 0x03, 0xC0, 0x60, 0x3C, 0x07, 0xFF, 0xC0, 0x7F, 0xFC, 0x06, 0x00, 0xC0, 0x60, 0x0E, 0x0F, 0x03, 0x71, 0xF8, 0x63, 0xF9, 0xFC, 0x1F, 0x0F, 0x80,
-/* 0x9D */
-/* 0x9E */ 0x63, 0x0C, 0x83, 0x60, 0x70, 0x00, 0x3F, 0xFF, 0xFC, 0x06, 0x03, 0x01, 0xC0, 0xE0, 0x70, 0x18, 0x0C, 0x06, 0x03, 0x80, 0xFF, 0xFF, 0xF0,
-/* 0x9F */ 0x0C, 0xC0, 0x33, 0x00, 0x00, 0x30, 0x03, 0xE0, 0x1D, 0x80, 0x67, 0x03, 0x0E, 0x1C, 0x18, 0x60, 0x73, 0x80, 0xCC, 0x03, 0xE0, 0x07, 0x80, 0x0C, 0x00, 0x30, 0x00, 0xC0, 0x03, 0x00, 0x0C, 0x00, 0x30, 0x00, 0xC0, 0x03, 0x00,
-/* 0xA0 */
-/* 0xA1 */ 0xF0, 0xBF, 0xFF, 0xFF, 0xF0,
-/* 0xA2 */ 0x04, 0x00, 0x80, 0x7C, 0x1F, 0xE7, 0x4C, 0xC8, 0xF1, 0x1E, 0x20, 0xC4, 0x18, 0x83, 0x10, 0x72, 0x37, 0x4E, 0x7F, 0x87, 0xC0, 0x20, 0x04, 0x00,
-/* 0xA3 */ 0x0F, 0xC1, 0xFE, 0x38, 0x76, 0x03, 0x60, 0x36, 0x00, 0x70, 0x03, 0x80, 0xFF, 0x0F, 0xF0, 0x1C, 0x00, 0xC0, 0x0C, 0x01, 0x80, 0x10, 0x02, 0xF1, 0x7F, 0xF6, 0x1F,
-/* 0xA4 */ 0xDD, 0xFF, 0xD8, 0xD8, 0x3C, 0x1E, 0x0F, 0x8D, 0xFF, 0xDD, 0x80,
-/* 0xA5 */ 0xC0, 0x3E, 0x06, 0x60, 0x63, 0x0C, 0x30, 0xC1, 0x98, 0x19, 0x80, 0xF0, 0x0F, 0x07, 0xFE, 0x06, 0x00, 0x60, 0x7F, 0xE0, 0x60, 0x06, 0x00, 0x60, 0x06, 0x00,
-/* 0xA6 */ 0xFF, 0xFF, 0xF0, 0x3F, 0xFF, 0xFC,
-/* 0xA7 */ 0x0F, 0x03, 0xF0, 0xE7, 0x18, 0x63, 0x0C, 0x70, 0x07, 0x03, 0xF8, 0xC3, 0x98, 0x3B, 0x03, 0xF0, 0x37, 0x06, 0x78, 0xC7, 0xB0, 0x7C, 0x03, 0x80, 0x39, 0x83, 0x30, 0x67, 0x1C, 0x7F, 0x07, 0xC0,
-/* 0xA8 */ 0xCF, 0x30,
-/* 0xA9 */ 0x03, 0xF0, 0x03, 0xFF, 0x01, 0xE0, 0xE0, 0xE3, 0x1C, 0x73, 0xF3, 0x99, 0x86, 0x6C, 0xC1, 0x8F, 0x30, 0x03, 0xCC, 0x00, 0xF3, 0x00, 0x3C, 0xC1, 0x8D, 0x98, 0x66, 0x77, 0xF3, 0x8E, 0x79, 0xC1, 0xC0, 0xE0, 0x3F, 0xF0, 0x03, 0xF0, 0x00,
-/* 0xAA */ 0x79, 0x08, 0x11, 0xEE, 0x50, 0xA3, 0x3B, 0x00, 0x03, 0xF8,
-/* 0xAB */ 0x21, 0x63, 0xE7, 0x84, 0x84, 0xE7, 0x63, 0x21,
-/* 0xAC */ 0xFF, 0xFF, 0xFF, 0x00, 0x30, 0x03, 0x00, 0x30, 0x03,
-/* 0xAD */ 0xFF, 0xF0,
-/* 0xAE */ 0x03, 0xF0, 0x03, 0xFF, 0x01, 0xE0, 0xE0, 0xFF, 0x1C, 0x7F, 0xF3, 0x9B, 0x04, 0x6C, 0xC1, 0x8F, 0x30, 0x43, 0xCF, 0xF0, 0xF3, 0xFC, 0x3C, 0xC1, 0x0D, 0xB0, 0x66, 0x7C, 0x1B, 0x8F, 0x07, 0xC1, 0xC0, 0xE0, 0x3F, 0xF0, 0x03, 0xF0, 0x00,
-/* 0xAF */ 0xFF, 0xF0,
-/* 0xB0 */ 0x38, 0xFB, 0x1C, 0x18, 0x38, 0xDF, 0x1C,
-/* 0xB1 */ 0x06, 0x00, 0x60, 0x06, 0x00, 0x60, 0x7F, 0xE7, 0xFE, 0x06, 0x00, 0x60, 0x06, 0x00, 0x60, 0x06, 0x00, 0x00, 0x00, 0x0F, 0xFF, 0xFF, 0xF0,
-/* 0xB2 */ 0x7D, 0x8F, 0x18, 0x30, 0xC6, 0x18, 0x60, 0xFF, 0xFC,
-/* 0xB3 */ 0x7D, 0x8F, 0x18, 0x31, 0x80, 0xC1, 0xE3, 0xC6, 0xF8,
-/* 0xB4 */ 0x3B, 0x99, 0x80,
-/* 0xB5 */ 0xC0, 0xCC, 0x0C, 0xC0, 0xCC, 0x0C, 0xC0, 0xCC, 0x0C, 0xC0, 0xCC, 0x0C, 0xC0, 0xCC, 0x1C, 0xE3, 0xCF, 0xEF, 0xFC, 0x7C, 0x00, 0xC0, 0x0C, 0x00, 0xC0, 0x00,
-/* 0xB6 */ 0x1F, 0xE7, 0xFD, 0xF3, 0x7E, 0x6F, 0xCD, 0xF9, 0xBF, 0x37, 0xE6, 0x7C, 0xCF, 0x98, 0xF3, 0x06, 0x60, 0xCC, 0x19, 0x83, 0x30, 0x66, 0x0C, 0xC1, 0x98, 0x33, 0x06, 0x60, 0xCC,
-/* 0xB7 */ 0xF0,
-/* 0xB8 */ 0x10, 0xF0, 0xE3, 0x78,
-/* 0xB9 */ 0x2F, 0xB6, 0xDB, 0x6C,
-/* 0xBA */ 0x79, 0x38, 0x61, 0x86, 0x1C, 0xDE, 0x00, 0x0F, 0xC0,
-/* 0xBB */ 0x88, 0xC6, 0xE7, 0x21, 0x21, 0xE7, 0xC6, 0x88,
-/* 0xBC */ 0x20, 0x08, 0x30, 0x0C, 0x38, 0x04, 0x0C, 0x06, 0x06, 0x02, 0x03, 0x02, 0x01, 0x81, 0x00, 0xC1, 0x06, 0x61, 0x87, 0x30, 0x83, 0x80, 0xC2, 0xC0, 0x42, 0x60, 0x43, 0x30, 0x21, 0xFC, 0x20, 0x0C, 0x30, 0x06, 0x10, 0x03, 0x00,
-/* 0xBD */ 0x20, 0x00, 0x08, 0x02, 0x06, 0x01, 0x83, 0x80, 0x40, 0x60, 0x20, 0x18, 0x18, 0x06, 0x04, 0x01, 0x83, 0x00, 0x61, 0x9F, 0x98, 0x4E, 0x76, 0x33, 0x0C, 0x08, 0x03, 0x04, 0x03, 0x83, 0x01, 0x80, 0x81, 0x80, 0x60, 0xC0, 0x30, 0x3F, 0xC8, 0x0F, 0xF0,
-/* 0xBE */ 0x7C, 0x00, 0x18, 0xC0, 0x43, 0x18, 0x18, 0x03, 0x02, 0x00, 0x60, 0xC0, 0x30, 0x10, 0x01, 0x84, 0x00, 0x31, 0x80, 0xC6, 0x20, 0xD8, 0xC8, 0x39, 0xF1, 0x07, 0x00, 0x41, 0x60, 0x18, 0x4C, 0x02, 0x11, 0x80, 0x83, 0xF8, 0x10, 0x06, 0x04, 0x00, 0xC1, 0x00, 0x18,
-/* 0xBF */ 0x0C, 0x06, 0x00, 0x00, 0x00, 0xC0, 0x60, 0x60, 0x30, 0x30, 0x38, 0x38, 0x18, 0x0C, 0x06, 0x0F, 0x07, 0xC7, 0x7F, 0x1F, 0x00,
-/* 0xC0 */ 0x0C, 0xDB, 0xD3, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-/* 0xC1 */ 0x03, 0x80, 0x07, 0x00, 0x1B, 0x00, 0x36, 0x00, 0xEE, 0x01, 0x8C, 0x03, 0x18, 0x0C, 0x18, 0x18, 0x30, 0x30, 0x60, 0xFF, 0xE1, 0xFF, 0xC7, 0x01, 0xCC, 0x01, 0x98, 0x03, 0x60, 0x03, 0xC0, 0x06,
-/* 0xC2 */ 0xFF, 0x87, 0xFF, 0x30, 0x1D, 0x80, 0x6C, 0x03, 0x60, 0x1B, 0x01, 0x9F, 0xFC, 0xFF, 0xE6, 0x03, 0xB0, 0x0F, 0x80, 0x3C, 0x01, 0xE0, 0x0F, 0x00, 0xDF, 0xFE, 0xFF, 0xC0,
-/* 0xC3 */ 0xFF, 0xFF, 0xFF, 0x00, 0x60, 0x0C, 0x01, 0x80, 0x30, 0x06, 0x00, 0xC0, 0x18, 0x03, 0x00, 0x60, 0x0C, 0x01, 0x80, 0x30, 0x06, 0x00, 0xC0, 0x00,
-/* 0xC4 */ 0x01, 0xC0, 0x01, 0xC0, 0x03, 0x60, 0x03, 0x60, 0x07, 0x60, 0x06, 0x30, 0x06, 0x30, 0x0C, 0x18, 0x0C, 0x18, 0x1C, 0x18, 0x18, 0x0C, 0x18, 0x0C, 0x30, 0x06, 0x30, 0x06, 0x70, 0x06, 0x7F, 0xFF, 0x7F, 0xFF,
-/* 0xC5 */ 0xFF, 0xFF, 0xFF, 0xF0, 0x01, 0x80, 0x0C, 0x00, 0x60, 0x03, 0x00, 0x1F, 0xFE, 0xFF, 0xF6, 0x00, 0x30, 0x01, 0x80, 0x0C, 0x00, 0x60, 0x03, 0x00, 0x1F, 0xFF, 0xFF, 0xF8,
-/* 0xC6 */ 0x7F, 0xFD, 0xFF, 0xF0, 0x01, 0x80, 0x0C, 0x00, 0x60, 0x03, 0x80, 0x1C, 0x00, 0x60, 0x03, 0x00, 0x18, 0x00, 0xE0, 0x07, 0x00, 0x18, 0x00, 0xC0, 0x06, 0x00, 0x3F, 0xFF, 0xFF, 0xFC,
-/* 0xC7 */ 0xC0, 0x1E, 0x00, 0xF0, 0x07, 0x80, 0x3C, 0x01, 0xE0, 0x0F, 0x00, 0x7F, 0xFF, 0xFF, 0xFE, 0x00, 0xF0, 0x07, 0x80, 0x3C, 0x01, 0xE0, 0x0F, 0x00, 0x78, 0x03, 0xC0, 0x18,
-/* 0xC8 */ 0x07, 0xF0, 0x0F, 0xFE, 0x0F, 0x07, 0x8E, 0x00, 0xE6, 0x00, 0x37, 0x00, 0x1F, 0x00, 0x07, 0x9F, 0xF3, 0xCF, 0xF9, 0xE0, 0x00, 0xF0, 0x00, 0x7C, 0x00, 0x76, 0x00, 0x33, 0x80, 0x38, 0xF0, 0x78, 0x3F, 0xF8, 0x07, 0xF0, 0x00,
-/* 0xC9 */ 0xFF, 0xFF, 0xFF, 0xFF, 0xC0,
-/* 0xCA */ 0xC0, 0x3B, 0x01, 0xCC, 0x0E, 0x30, 0x70, 0xC3, 0x83, 0x1C, 0x0C, 0xE0, 0x37, 0x80, 0xFF, 0x03, 0xDC, 0x0E, 0x38, 0x30, 0x70, 0xC0, 0xE3, 0x03, 0x8C, 0x07, 0x30, 0x0E, 0xC0, 0x1C,
-/* 0xCB */ 0x01, 0xC0, 0x00, 0xE0, 0x00, 0xD8, 0x00, 0x6C, 0x00, 0x37, 0x00, 0x31, 0x80, 0x18, 0xC0, 0x18, 0x30, 0x0C, 0x18, 0x0E, 0x0E, 0x06, 0x03, 0x03, 0x01, 0x83, 0x00, 0x61, 0x80, 0x31, 0xC0, 0x1C, 0xC0, 0x06, 0x60, 0x03, 0x00,
-/* 0xCC */ 0xE0, 0x0F, 0xE0, 0x3F, 0xC0, 0x7F, 0x80, 0xFD, 0x83, 0x7B, 0x06, 0xF6, 0x0D, 0xE4, 0x13, 0xCC, 0x67, 0x98, 0xCF, 0x31, 0x9E, 0x36, 0x3C, 0x6C, 0x78, 0xD8, 0xF0, 0xA1, 0xE1, 0xC3, 0xC3, 0x86,
-/* 0xCD */ 0xC0, 0x1F, 0x00, 0xFC, 0x07, 0xE0, 0x3D, 0x81, 0xEE, 0x0F, 0x30, 0x78, 0xC3, 0xC7, 0x1E, 0x18, 0xF0, 0x67, 0x83, 0xBC, 0x0D, 0xE0, 0x3F, 0x01, 0xF8, 0x07, 0xC0, 0x18,
-/* 0xCE */ 0xFF, 0xFF, 0xFF, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0xFE, 0x7F, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F, 0xFF, 0xFF, 0xFC,
-/* 0xCF */ 0x07, 0xF0, 0x0F, 0xFE, 0x0F, 0x07, 0x8E, 0x00, 0xE6, 0x00, 0x37, 0x00, 0x1F, 0x00, 0x07, 0x80, 0x03, 0xC0, 0x01, 0xE0, 0x00, 0xF0, 0x00, 0x7C, 0x00, 0x76, 0x00, 0x33, 0x80, 0x38, 0xF0, 0x78, 0x3F, 0xF8, 0x07, 0xF0, 0x00,
-/* 0xD0 */ 0xFF, 0xFF, 0xFF, 0xF0, 0x07, 0x80, 0x3C, 0x01, 0xE0, 0x0F, 0x00, 0x78, 0x03, 0xC0, 0x1E, 0x00, 0xF0, 0x07, 0x80, 0x3C, 0x01, 0xE0, 0x0F, 0x00, 0x78, 0x03, 0xC0, 0x18,
-/* 0xD1 */ 0xFF, 0xC7, 0xFF, 0xB0, 0x0D, 0x80, 0x3C, 0x01, 0xE0, 0x0F, 0x00, 0x78, 0x06, 0xFF, 0xF7, 0xFE, 0x30, 0x01, 0x80, 0x0C, 0x00, 0x60, 0x03, 0x00, 0x18, 0x00, 0xC0, 0x00,
-/* 0xD2 */
-/* 0xD3 */ 0xFF, 0xEF, 0xFE, 0xC0, 0x06, 0x00, 0x30, 0x01, 0x80, 0x0C, 0x00, 0x60, 0x03, 0x00, 0x60, 0x0C, 0x01, 0x80, 0x30, 0x06, 0x00, 0xC0, 0x0F, 0xFF, 0xFF, 0xF0,
-/* 0xD4 */ 0xFF, 0xFF, 0xFF, 0xF0, 0x30, 0x00, 0xC0, 0x03, 0x00, 0x0C, 0x00, 0x30, 0x00, 0xC0, 0x03, 0x00, 0x0C, 0x00, 0x30, 0x00, 0xC0, 0x03, 0x00, 0x0C, 0x00, 0x30, 0x00, 0xC0, 0x03, 0x00,
-/* 0xD5 */ 0xE0, 0x07, 0x60, 0x0E, 0x30, 0x1C, 0x38, 0x1C, 0x1C, 0x38, 0x0E, 0x70, 0x06, 0x60, 0x07, 0xE0, 0x03, 0xC0, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80,
-/* 0xD6 */ 0x01, 0x80, 0x01, 0x80, 0x0F, 0xF0, 0x3F, 0xFC, 0x71, 0x8E, 0x61, 0x86, 0xC1, 0x83, 0xC1, 0x83, 0xC1, 0x83, 0xC1, 0x83, 0x61, 0x86, 0x71, 0x8E, 0x3F, 0xFC, 0x0F, 0xF0, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80,
-/* 0xD7 */ 0x70, 0x1C, 0x70, 0x70, 0x61, 0xC0, 0xE3, 0x80, 0xEE, 0x00, 0xD8, 0x01, 0xF0, 0x01, 0xC0, 0x03, 0x80, 0x0D, 0x80, 0x3B, 0x80, 0x77, 0x01, 0xC7, 0x07, 0x07, 0x0E, 0x06, 0x38, 0x0E, 0xE0, 0x0E,
-/* 0xD8 */ 0xC1, 0x83, 0xC1, 0x83, 0xC1, 0x83, 0xC1, 0x83, 0xC1, 0x83, 0xC1, 0x83, 0xC1, 0x83, 0xC1, 0x83, 0x61, 0x86, 0x79, 0x9E, 0x3F, 0xFC, 0x0F, 0xF0, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80,
-/* 0xD9 */ 0x07, 0xE0, 0x1F, 0xF8, 0x38, 0x3C, 0x70, 0x0E, 0x60, 0x06, 0xE0, 0x07, 0xC0, 0x03, 0xC0, 0x03, 0xC0, 0x03, 0xC0, 0x03, 0xC0, 0x03, 0x60, 0x06, 0x60, 0x06, 0x30, 0x0C, 0x1C, 0x38, 0xFE, 0x7F, 0xFE, 0x7F,
-/* 0xDA */ 0xCF, 0x30, 0x0C, 0x30, 0xC3, 0x0C, 0x30, 0xC3, 0x0C, 0x30, 0xC3, 0x0C, 0x30, 0xC3, 0x0C,
-/* 0xDB */ 0x06, 0x60, 0x06, 0x60, 0x00, 0x00, 0xE0, 0x07, 0x60, 0x0E, 0x30, 0x1C, 0x38, 0x1C, 0x1C, 0x38, 0x0E, 0x70, 0x06, 0x60, 0x07, 0xE0, 0x03, 0xC0, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80,
-/* 0xDC */ 0x03, 0x80, 0x30, 0x06, 0x00, 0x00, 0x1E, 0x33, 0xFB, 0x71, 0xFE, 0x0E, 0xC0, 0x6C, 0x06, 0xC0, 0x6C, 0x06, 0xC0, 0x6E, 0x0E, 0x71, 0xF3, 0xFF, 0x1F, 0x30,
-/* 0xDD */ 0x0C, 0x0C, 0x04, 0x00, 0x03, 0xE3, 0xFF, 0x8D, 0x80, 0xE0, 0x3E, 0x1F, 0x1C, 0x0C, 0x06, 0x0B, 0x8E, 0xFE, 0x3E, 0x00,
-/* 0xDE */ 0x07, 0x01, 0x80, 0xC0, 0x00, 0xCF, 0x3F, 0xEE, 0x1F, 0x03, 0xC0, 0xF0, 0x3C, 0x0F, 0x03, 0xC0, 0xF0, 0x3C, 0x0F, 0x03, 0xC0, 0xC0, 0x30, 0x0C, 0x03, 0x00, 0xC0, 0x30,
-/* 0xDF */ 0x76, 0xC0, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x60,
-/* 0xE0 */ 0x0C, 0x1B, 0x66, 0x98, 0x00, 0xC0, 0xF0, 0x3C, 0x0F, 0x03, 0xC0, 0xF0, 0x3C, 0x0F, 0x03, 0xC0, 0xF0, 0x36, 0x19, 0xFE, 0x1E, 0x00,
-/* 0xE1 */ 0x1E, 0x33, 0xFB, 0x71, 0xFE, 0x0E, 0xC0, 0x6C, 0x06, 0xC0, 0x6C, 0x06, 0xC0, 0x6E, 0x0E, 0x71, 0xF3, 0xFF, 0x1F, 0x30,
-/* 0xE2 */ 0x1F, 0x0F, 0xF1, 0x87, 0x60, 0x6C, 0x0D, 0x83, 0x33, 0x86, 0x7C, 0xC1, 0xD8, 0x1F, 0x01, 0xE0, 0x3C, 0x07, 0xC0, 0xFC, 0x36, 0xFE, 0xCF, 0x18, 0x03, 0x00, 0x60, 0x0C, 0x01, 0x80, 0x00,
-/* 0xE3 */ 0x60, 0x66, 0x06, 0x60, 0x63, 0x0C, 0x30, 0xC3, 0x8C, 0x19, 0x81, 0x98, 0x1F, 0x80, 0xF0, 0x0F, 0x00, 0xF0, 0x06, 0x00, 0x60, 0x06, 0x00, 0x60, 0x06, 0x00, 0x60,
-/* 0xE4 */ 0x7F, 0xCF, 0xF8, 0xE0, 0x07, 0x01, 0xF0, 0x7F, 0x1C, 0x77, 0x07, 0xC0, 0x78, 0x0F, 0x01, 0xE0, 0x3C, 0x07, 0xC1, 0x9C, 0x71, 0xFC, 0x1F, 0x00,
-/* 0xE5 */ 0x3E, 0x3F, 0xF8, 0xD8, 0x0E, 0x03, 0xE1, 0xF1, 0xC0, 0xC0, 0x60, 0xB8, 0xEF, 0xE3, 0xE0,
-/* 0xE6 */ 0x3F, 0x9F, 0xC0, 0xC1, 0xC1, 0xC0, 0xC0, 0xC0, 0xC0, 0x60, 0x70, 0x30, 0x18, 0x0C, 0x06, 0x03, 0x80, 0xFC, 0x3F, 0x80, 0xC0, 0x60, 0x70, 0xF0, 0x70,
-/* 0xE7 */ 0xCF, 0x3F, 0xEE, 0x1F, 0x03, 0xC0, 0xF0, 0x3C, 0x0F, 0x03, 0xC0, 0xF0, 0x3C, 0x0F, 0x03, 0xC0, 0xC0, 0x30, 0x0C, 0x03, 0x00, 0xC0, 0x30,
-/* 0xE8 */ 0x1F, 0x07, 0xF1, 0xC7, 0x30, 0x6C, 0x07, 0x80, 0xF0, 0x1F, 0xFF, 0xFF, 0xF8, 0x0F, 0x01, 0xE0, 0x3C, 0x0E, 0xC1, 0x9C, 0x71, 0xFC, 0x1F, 0x00,
-/* 0xE9 */ 0xFF, 0xFF, 0xFF, 0xC0,
-/* 0xEA */ 0xC1, 0xB0, 0xCC, 0x63, 0x30, 0xD8, 0x3C, 0x0F, 0x83, 0x60, 0xCC, 0x31, 0x8C, 0x73, 0x0C, 0xC1, 0x80,
-/* 0xEB */ 0x0C, 0x00, 0x60, 0x01, 0x80, 0x0C, 0x00, 0x60, 0x01, 0x80, 0x1C, 0x00, 0xF0, 0x0D, 0x80, 0x6C, 0x06, 0x30, 0x31, 0x83, 0x8E, 0x18, 0x30, 0xC1, 0x8C, 0x06, 0x60, 0x30,
-/* 0xEC */ 0xC0, 0xF0, 0x3C, 0x0F, 0x03, 0xC0, 0xF0, 0x3C, 0x0F, 0x03, 0xC0, 0xF8, 0x7E, 0x1F, 0xFF, 0xDE, 0xF0, 0x0C, 0x03, 0x00, 0xC0, 0x30, 0x00,
-/* 0xED */ 0xC0, 0x78, 0x0D, 0x83, 0x30, 0x66, 0x0C, 0x63, 0x0C, 0x60, 0xD8, 0x1B, 0x03, 0x60, 0x38, 0x07, 0x00, 0x40,
-/* 0xEE */ 0x1F, 0x1F, 0x9C, 0x0C, 0x07, 0x01, 0xF8, 0x3C, 0x70, 0x70, 0x30, 0x30, 0x18, 0x0C, 0x06, 0x01, 0xC0, 0xFC, 0x1F, 0x00, 0xC0, 0x60, 0x70, 0xF0, 0x70,
-/* 0xEF */ 0x1F, 0x07, 0xF1, 0xC7, 0x70, 0x7C, 0x07, 0x80, 0xF0, 0x1E, 0x03, 0xC0, 0x7C, 0x1D, 0xC7, 0x1F, 0xC1, 0xF0,
-/* 0xF0 */ 0xFF, 0xFF, 0xFF, 0xFF, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-/* 0xF1 */ 0x1F, 0x07, 0xF1, 0xC7, 0x70, 0x6C, 0x07, 0x80, 0xF0, 0x1E, 0x03, 0xC0, 0x7C, 0x1F, 0xC7, 0x7F, 0xCD, 0xF1, 0x80, 0x30, 0x06, 0x00, 0xC0, 0x18, 0x00,
-/* 0xF2 */ 0x07, 0xE3, 0xFC, 0xE0, 0x30, 0x06, 0x01, 0x80, 0x30, 0x06, 0x00, 0xC0, 0x1C, 0x01, 0xC0, 0x1F, 0x80, 0xF8, 0x03, 0x80, 0x30, 0x0E, 0x0F, 0x81, 0xE0,
-/* 0xF3 */ 0x1F, 0xF9, 0xFF, 0xDC, 0x39, 0xC0, 0xCC, 0x03, 0x60, 0x1B, 0x00, 0xD8, 0x06, 0xC0, 0x37, 0x03, 0x9C, 0x38, 0x7F, 0x81, 0xF8, 0x00,
-/* 0xF4 */ 0xFF, 0xF3, 0x0C, 0x30, 0xC3, 0x0C, 0x30, 0xC3, 0x0C, 0x30,
-/* 0xF5 */ 0xC0, 0xF0, 0x3C, 0x0F, 0x03, 0xC0, 0xF0, 0x3C, 0x0F, 0x03, 0xC0, 0xF0, 0x36, 0x19, 0xFE, 0x1E, 0x00,
-/* 0xF6 */ 0x19, 0xE0, 0xEF, 0xC6, 0x31, 0xB8, 0xC3, 0xC3, 0x0F, 0x0C, 0x3C, 0x30, 0xF0, 0xC3, 0xE3, 0x1D, 0x8C, 0x67, 0xB7, 0x0F, 0xF8, 0x0F, 0xC0, 0x0C, 0x00, 0x30, 0x00, 0xC0, 0x03, 0x00, 0x0C, 0x00,
-/* 0xF7 */ 0x60, 0x33, 0x03, 0x8C, 0x18, 0x71, 0xC1, 0x8C, 0x0E, 0xC0, 0x36, 0x00, 0xE0, 0x07, 0x00, 0x38, 0x01, 0xC0, 0x1B, 0x00, 0xDC, 0x0C, 0x60, 0xE3, 0x86, 0x0C, 0x70, 0x33, 0x01, 0x80,
-/* 0xF8 */ 0xC3, 0x0F, 0x0C, 0x3C, 0x30, 0xF0, 0xC3, 0xC3, 0x0F, 0x0C, 0x3C, 0x30, 0xF0, 0xC3, 0xC3, 0x0F, 0x8C, 0x77, 0x33, 0x8F, 0xFC, 0x1F, 0xE0, 0x0C, 0x00, 0x30, 0x00, 0xC0, 0x03, 0x00, 0x0C, 0x00,
-/* 0xF9 */ 0x30, 0x0C, 0x60, 0x06, 0x60, 0x06, 0xE1, 0x87, 0xC1, 0x83, 0xC1, 0x83, 0xC1, 0x83, 0xC1, 0x83, 0xC1, 0x83, 0xE1, 0x87, 0x63, 0xC6, 0x7E, 0x7E, 0x3C, 0x38,
-/* 0xFA */ 0xCF, 0x30, 0x0C, 0x30, 0xC3, 0x0C, 0x30, 0xC3, 0x0C, 0x30, 0xC3, 0x0C,
-/* 0xFB */ 0x33, 0x0C, 0xC0, 0x03, 0x03, 0xC0, 0xF0, 0x3C, 0x0F, 0x03, 0xC0, 0xF0, 0x3C, 0x0F, 0x03, 0xC0, 0xD8, 0x67, 0xF8, 0x78,
-/* 0xFC */ 0x07, 0x00, 0xC0, 0x30, 0x00, 0x01, 0xF0, 0x7F, 0x1C, 0x77, 0x07, 0xC0, 0x78, 0x0F, 0x01, 0xE0, 0x3C, 0x07, 0xC1, 0xDC, 0x71, 0xFC, 0x1F, 0x00,
-/* 0xFD */ 0x06, 0x03, 0x00, 0x80, 0x00, 0xC0, 0xF0, 0x3C, 0x0F, 0x03, 0xC0, 0xF0, 0x3C, 0x0F, 0x03, 0xC0, 0xF0, 0x36, 0x19, 0xFE, 0x1E, 0x00,
-/* 0xFE */ 0x00, 0xC0, 0x01, 0x80, 0x01, 0x00, 0x00, 0x00, 0x30, 0x0C, 0x60, 0x06, 0x60, 0x06, 0xE1, 0x87, 0xC1, 0x83, 0xC1, 0x83, 0xC1, 0x83, 0xC1, 0x83, 0xC1, 0x83, 0xE1, 0x87, 0x63, 0xC6, 0x7E, 0x7E, 0x3C, 0x38,
-/* 0xFF */
-};
-
-const GFXglyph FreeSans12pt_Win1253Glyphs[] PROGMEM = {
-/* 0x01 */ {     0,   19,   20,   21,    1,  -17 },
-/* 0x02 */ {    48,   19,   20,   21,    1,  -17 },
-/* 0x03 */ {    96,   21,   20,   23,    1,  -17 },
-/* 0x04 */ {   149,   21,   20,   23,    1,  -17 },
-/* 0x05 */ {   202,   20,   20,   22,    1,  -17 },
-/* 0x06 */ {   252,   20,   20,   22,    1,  -17 },
-/* 0x07 */ {   302,    0,    0,    8,    0,    0 },
-/* 0x08 */ {   302,   23,   20,   25,    1,  -17 },
-/* 0x09 */ {   360,   23,   16,   25,    1,  -16 },
-/* 0x0A */ {   406,    0,    0,    8,    0,    0 },
-/* 0x0B */ {   406,   21,   20,   23,    1,  -17 },
-/* 0x0C */ {   459,   19,   18,   21,    1,  -15 },
-/* 0x0D */ {   502,    0,    0,    8,    0,    0 },
-/* 0x0E */ {   502,   20,   20,   22,    1,  -17 },
-/* 0x0F */ {   552,   21,   21,   23,    1,  -18 },
-/* 0x10 */ {   608,   19,   20,   21,    1,  -17 },
-/* 0x11 */ {   656,   21,   20,   23,    1,  -17 },
-/* 0x12 */ {   709,   20,   20,   22,    1,  -17 },
-/* 0x13 */ {   759,   21,   20,   23,    1,  -17 },
-/* 0x14 */ {   812,   21,   20,   23,    1,  -17 },
-/* 0x15 */ {   865,   22,   20,   24,    1,  -17 },
-/* 0x16 */ {   920,   16,   20,   18,    1,  -17 },
-/* 0x17 */ {   960,   21,   20,   23,    1,  -17 },
-/* 0x18 */ {  1013,   23,   20,   25,    1,  -17 },
-/* 0x19 */ {  1071,   21,   20,   23,    1,  -17 },
-/* 0x1A */ {  1124,   15,   19,   17,    1,  -16 },
-/* 0x1B */ {  1160,   24,   21,   26,    1,  -18 },
-/* 0x1C */ {  1223,   21,   20,   23,    1,  -17 },
-/* 0x1D */ {  1276,   21,   21,   23,    1,  -18 },
-/* 0x1E */ {  1332,   20,   20,   22,    1,  -17 },
-/* 0x1F */ {  1382,   15,   20,   17,    1,  -17 },
-/* ' ' 0x20 */ {  1420,    0,    0,    6,    0,    0 },
-/* '!' 0x21 */ {  1420,    2,   18,    8,    3,  -16 },
-/* '"' 0x22 */ {  1425,    6,    6,    8,    1,  -15 },
-/* '#' 0x23 */ {  1430,   13,   16,   13,    0,  -14 },
-/* '$' 0x24 */ {  1456,   11,   20,   13,    1,  -16 },
-/* '%' 0x25 */ {  1484,   20,   17,   21,    1,  -15 },
-/* '&' 0x26 */ {  1527,   14,   17,   16,    1,  -15 },
-/* ''' 0x27 */ {  1557,    2,    6,    5,    1,  -15 },
-/* '(' 0x28 */ {  1559,    5,   23,    8,    2,  -16 },
-/* ')' 0x29 */ {  1574,    5,   23,    8,    1,  -16 },
-/* '*' 0x2A */ {  1589,    7,    7,    9,    1,  -16 },
-/* '+' 0x2B */ {  1596,   10,   11,   14,    2,   -9 },
-/* ',' 0x2C */ {  1610,    2,    6,    7,    2,    0 },
-/* '-' 0x2D */ {  1612,    6,    2,    8,    1,   -6 },
-/* '.' 0x2E */ {  1614,    2,    2,    6,    2,    0 },
-/* '/' 0x2F */ {  1615,    7,   18,    7,    0,  -16 },
-/* '0' 0x30 */ {  1631,   11,   17,   13,    1,  -15 },
-/* '1' 0x31 */ {  1655,    5,   17,   13,    3,  -15 },
-/* '2' 0x32 */ {  1666,   11,   17,   13,    1,  -15 },
-/* '3' 0x33 */ {  1690,   11,   17,   13,    1,  -15 },
-/* '4' 0x34 */ {  1714,   11,   17,   13,    1,  -15 },
-/* '5' 0x35 */ {  1738,   11,   17,   13,    1,  -15 },
-/* '6' 0x36 */ {  1762,   11,   17,   13,    1,  -15 },
-/* '7' 0x37 */ {  1786,   11,   17,   13,    1,  -15 },
-/* '8' 0x38 */ {  1810,   11,   17,   13,    1,  -15 },
-/* '9' 0x39 */ {  1834,   11,   17,   13,    1,  -15 },
-/* ':' 0x3A */ {  1858,    2,   13,    6,    2,  -11 },
-/* ';' 0x3B */ {  1862,    2,   16,    6,    2,  -10 },
-/* '<' 0x3C */ {  1866,   12,   11,   14,    1,   -9 },
-/* '=' 0x3D */ {  1883,   12,    6,   14,    1,   -7 },
-/* '>' 0x3E */ {  1892,   12,   11,   14,    1,   -9 },
-/* '?' 0x3F */ {  1909,   10,   18,   13,    2,  -16 },
-/* '@' 0x40 */ {  1932,   22,   21,   24,    1,  -16 },
-/* 'A' 0x41 */ {  1990,   14,   18,   16,    1,  -16 },
-/* 'B' 0x42 */ {  2022,   13,   18,   16,    2,  -16 },
-/* 'C' 0x43 */ {  2052,   15,   18,   17,    1,  -16 },
-/* 'D' 0x44 */ {  2086,   14,   18,   17,    2,  -16 },
-/* 'E' 0x45 */ {  2118,   12,   18,   15,    2,  -16 },
-/* 'F' 0x46 */ {  2145,   11,   18,   14,    2,  -16 },
-/* 'G' 0x47 */ {  2170,   16,   18,   18,    1,  -16 },
-/* 'H' 0x48 */ {  2206,   13,   18,   17,    2,  -16 },
-/* 'I' 0x49 */ {  2236,    2,   18,    7,    2,  -16 },
-/* 'J' 0x4A */ {  2241,    9,   18,   13,    1,  -16 },
-/* 'K' 0x4B */ {  2262,   13,   18,   16,    2,  -16 },
-/* 'L' 0x4C */ {  2292,   10,   18,   14,    2,  -16 },
-/* 'M' 0x4D */ {  2315,   16,   18,   20,    2,  -16 },
-/* 'N' 0x4E */ {  2351,   13,   18,   18,    2,  -16 },
-/* 'O' 0x4F */ {  2381,   17,   18,   19,    1,  -16 },
-/* 'P' 0x50 */ {  2420,   12,   18,   16,    2,  -16 },
-/* 'Q' 0x51 */ {  2447,   17,   19,   19,    1,  -16 },
-/* 'R' 0x52 */ {  2488,   14,   18,   17,    2,  -16 },
-/* 'S' 0x53 */ {  2520,   14,   18,   16,    1,  -16 },
-/* 'T' 0x54 */ {  2552,   12,   18,   15,    1,  -16 },
-/* 'U' 0x55 */ {  2579,   13,   18,   17,    2,  -16 },
-/* 'V' 0x56 */ {  2609,   14,   18,   15,    1,  -16 },
-/* 'W' 0x57 */ {  2641,   22,   18,   22,    0,  -16 },
-/* 'X' 0x58 */ {  2691,   14,   18,   16,    1,  -16 },
-/* 'Y' 0x59 */ {  2723,   14,   18,   16,    1,  -16 },
-/* 'Z' 0x5A */ {  2755,   13,   18,   15,    1,  -16 },
-/* '[' 0x5B */ {  2785,    4,   23,    7,    2,  -16 },
-/* '\' 0x5C */ {  2797,    7,   18,    7,    0,  -16 },
-/* ']' 0x5D */ {  2813,    4,   23,    7,    1,  -16 },
-/* '^' 0x5E */ {  2825,    9,    9,   11,    1,  -15 },
-/* '_' 0x5F */ {  2836,   15,    1,   13,   -1,    5 },
-/* '`' 0x60 */ {  2838,    5,    4,    6,    1,  -16 },
-/* 'a' 0x61 */ {  2841,   12,   13,   13,    1,  -11 },
-/* 'b' 0x62 */ {  2861,   12,   18,   13,    1,  -16 },
-/* 'c' 0x63 */ {  2888,   10,   13,   12,    1,  -11 },
-/* 'd' 0x64 */ {  2905,   11,   18,   13,    1,  -16 },
-/* 'e' 0x65 */ {  2930,   11,   13,   13,    1,  -11 },
-/* 'f' 0x66 */ {  2948,    5,   18,    7,    1,  -16 },
-/* 'g' 0x67 */ {  2960,   11,   18,   13,    1,  -11 },
-/* 'h' 0x68 */ {  2985,   10,   18,   13,    1,  -16 },
-/* 'i' 0x69 */ {  3008,    2,   18,    5,    2,  -16 },
-/* 'j' 0x6A */ {  3013,    4,   23,    6,    0,  -16 },
-/* 'k' 0x6B */ {  3025,   10,   18,   12,    1,  -16 },
-/* 'l' 0x6C */ {  3048,    2,   18,    5,    1,  -16 },
-/* 'm' 0x6D */ {  3053,   17,   13,   19,    1,  -11 },
-/* 'n' 0x6E */ {  3081,   10,   13,   13,    1,  -11 },
-/* 'o' 0x6F */ {  3098,   11,   13,   13,    1,  -11 },
-/* 'p' 0x70 */ {  3116,   12,   17,   13,    1,  -11 },
-/* 'q' 0x71 */ {  3142,   11,   17,   13,    1,  -11 },
-/* 'r' 0x72 */ {  3166,    6,   13,    8,    1,  -11 },
-/* 's' 0x73 */ {  3176,   10,   13,   12,    1,  -11 },
-/* 't' 0x74 */ {  3193,    5,   16,    7,    1,  -14 },
-/* 'u' 0x75 */ {  3203,   10,   13,   13,    1,  -11 },
-/* 'v' 0x76 */ {  3220,   11,   13,   12,    0,  -11 },
-/* 'w' 0x77 */ {  3238,   17,   13,   17,    0,  -11 },
-/* 'x' 0x78 */ {  3266,   10,   13,   11,    1,  -11 },
-/* 'y' 0x79 */ {  3283,   11,   18,   11,    0,  -11 },
-/* 'z' 0x7A */ {  3308,   10,   13,   12,    1,  -11 },
-/* '{' 0x7B */ {  3325,    5,   23,    8,    1,  -16 },
-/* '|' 0x7C */ {  3340,    2,   23,    6,    2,  -16 },
-/* '}' 0x7D */ {  3346,    5,   23,    8,    2,  -16 },
-/* '~' 0x7E */ {  3361,   10,    5,   12,    1,   -9 },
-/* 0x7F */ {  3368,    0,    0,    0,    0,    0 },
-/* 0x80 */ {  3368,   14,   17,   16,    1,  -15 },
-/* 0x81 */ {  3398,    0,    0,    8,    0,    0 },
-/* 0x82 */ {  3398,    2,    5,    6,    2,    0 },
-/* 0x83 */ {  3400,    6,   23,    7,    0,  -16 },
-/* 0x84 */ {  3418,    6,    5,   10,    2,    0 },
-/* 0x85 */ {  3422,   12,    2,   16,    2,    0 },
-/* 0x86 */ {  3425,   10,   21,   13,    2,  -15 },
-/* 0x87 */ {  3452,   10,   20,   13,    2,  -15 },
-/* 0x88 */ {  3477,    7,    4,    8,    0,  -16 },
-/* 0x89 */ {  3481,   23,   18,   24,    0,  -16 },
-/* 0x8A */ {  3533,   14,   21,   16,    1,  -19 },
-/* 0x8B */ {  3570,    3,    8,    6,    1,   -9 },
-/* 0x8C */ {  3573,   22,   18,   24,    1,  -16 },
-/* 0x8D */ {  3623,    0,    0,    8,    0,    0 },
-/* 0x8E */ {  3623,   13,   21,   15,    1,  -19 },
-/* 0x8F */ {  3658,    0,    0,    8,    0,    0 },
-/* 0x90 */ {  3658,    0,    0,    8,    0,    0 },
-/* 0x91 */ {  3658,    2,    6,    6,    2,  -16 },
-/* 0x92 */ {  3660,    2,    6,    6,    2,  -16 },
-/* 0x93 */ {  3662,    6,    6,   10,    2,  -16 },
-/* 0x94 */ {  3667,    6,    6,   10,    2,  -16 },
-/* 0x95 */ {  3672,    6,    6,   10,    2,   -9 },
-/* 0x96 */ {  3677,   10,    2,   12,    1,   -6 },
-/* 0x97 */ {  3680,   22,    2,   24,    1,   -6 },
-/* 0x98 */ {  3686,    7,    3,    8,    0,  -16 },
-/* 0x99 */ {  3689,   22,   13,   24,    2,  -16 },
-/* 0x9A */ {  3725,   10,   18,   12,    1,  -16 },
-/* 0x9B */ {  3748,    3,    8,    6,    2,   -8 },
-/* 0x9C */ {  3751,   20,   13,   22,    1,  -11 },
-/* 0x9D */ {  3784,    0,    0,    8,    0,    0 },
-/* 0x9E */ {  3784,   10,   18,   12,    1,  -16 },
-/* 0x9F */ {  3807,   14,   21,   16,    1,  -19 },
-/* 0xA0 */ {  3844,    0,    0,    7,    0,    0 },
-/* 0xA1 */ {  3844,    2,   18,    8,    3,  -11 },
-/* 0xA2 */ {  3849,   11,   17,   13,    1,  -13 },
-/* 0xA3 */ {  3873,   12,   18,   13,    0,  -16 },
-/* 0xA4 */ {  3900,    9,    9,   13,    2,  -11 },
-/* 0xA5 */ {  3911,   12,   17,   13,    1,  -15 },
-/* 0xA6 */ {  3937,    2,   23,    6,    2,  -16 },
-/* 0xA7 */ {  3943,   11,   23,   13,    1,  -16 },
-/* 0xA8 */ {  3975,    6,    2,    8,    1,  -15 },
-/* 0xA9 */ {  3977,   18,   17,   19,    1,  -15 },
-/* 0xAA */ {  4016,    7,   11,    9,    1,  -16 },
-/* 0xAB */ {  4026,    8,    8,   12,    2,   -9 },
-/* 0xAC */ {  4034,   12,    6,   14,    1,   -7 },
-/* 0xAD */ {  4043,    6,    2,    8,    1,   -6 },
-/* 0xAE */ {  4045,   18,   17,   19,    1,  -15 },
-/* 0xAF */ {  4084,    6,    2,    8,    1,  -15 },
-/* 0xB0 */ {  4086,    7,    8,   15,    4,  -15 },
-/* 0xB1 */ {  4093,   12,   15,   14,    1,  -13 },
-/* 0xB2 */ {  4116,    7,   10,    8,    1,  -17 },
-/* 0xB3 */ {  4125,    7,   10,    8,    1,  -17 },
-/* 0xB4 */ {  4134,    5,    4,    8,    2,  -16 },
-/* 0xB5 */ {  4137,   12,   17,   13,    2,  -11 },
-/* 0xB6 */ {  4163,   11,   21,   13,    2,  -16 },
-/* 0xB7 */ {  4192,    2,    2,    6,    2,   -6 },
-/* 0xB8 */ {  4193,    6,    5,    8,    1,    2 },
-/* 0xB9 */ {  4197,    3,   10,    8,    3,  -18 },
-/* 0xBA */ {  4201,    6,   11,    9,    1,  -16 },
-/* 0xBB */ {  4210,    8,    8,   12,    2,   -8 },
-/* 0xBC */ {  4218,   17,   17,   21,    3,  -15 },
-/* 0xBD */ {  4255,   18,   18,   21,    3,  -16 },
-/* 0xBE */ {  4296,   19,   18,   21,    1,  -16 },
-/* 0xBF */ {  4339,    9,   18,   13,    3,  -11 },
-/* 0xC0 */ {  4360,    8,   18,    6,   -1,  -18 },
-/* 0xC1 */ {  4378,   15,   17,   15,    0,  -17 },
-/* 0xC2 */ {  4410,   13,   17,   16,    2,  -17 },
-/* 0xC3 */ {  4438,   11,   17,   13,    2,  -17 },
-/* 0xC4 */ {  4462,   16,   17,   16,   -1,  -17 },
-/* 0xC5 */ {  4496,   13,   17,   16,    2,  -17 },
-/* 0xC6 */ {  4524,   14,   17,   15,    0,  -17 },
-/* 0xC7 */ {  4554,   13,   17,   17,    2,  -17 },
-/* 0xC8 */ {  4582,   17,   17,   19,    1,  -17 },
-/* 0xC9 */ {  4619,    2,   17,    6,    2,  -17 },
-/* 0xCA */ {  4624,   14,   17,   16,    2,  -17 },
-/* 0xCB */ {  4654,   17,   17,   16,   -1,  -17 },
-/* 0xCC */ {  4691,   15,   17,   19,    2,  -17 },
-/* 0xCD */ {  4723,   13,   17,   17,    2,  -17 },
-/* 0xCE */ {  4751,   14,   17,   16,    1,  -17 },
-/* 0xCF */ {  4781,   17,   17,   19,    1,  -17 },
-/* 0xD0 */ {  4818,   13,   17,   17,    2,  -17 },
-/* 0xD1 */ {  4846,   13,   17,   16,    2,  -17 },
-/* 0xD2 */ {  4874,    0,    0,    5,    0,    0 },
-/* 0xD3 */ {  4874,   12,   17,   15,    2,  -17 },
-/* 0xD4 */ {  4900,   14,   17,   14,    0,  -17 },
-/* 0xD5 */ {  4930,   16,   17,   16,    0,  -17 },
-/* 0xD6 */ {  4964,   16,   17,   18,    1,  -17 },
-/* 0xD7 */ {  4998,   15,   17,   15,    0,  -17 },
-/* 0xD8 */ {  5030,   16,   17,   19,    2,  -17 },
-/* 0xD9 */ {  5064,   16,   17,   18,    1,  -17 },
-/* 0xDA */ {  5098,    6,   20,    6,    0,  -20 },
-/* 0xDB */ {  5113,   16,   20,   16,    0,  -20 },
-/* 0xDC */ {  5153,   12,   17,   14,    1,  -17 },
-/* 0xDD */ {  5179,    9,   17,   11,    1,  -17 },
-/* 0xDE */ {  5199,   10,   22,   14,    2,  -17 },
-/* 0xDF */ {  5227,    4,   17,    6,    1,  -17 },
-/* 0xE0 */ {  5236,   10,   17,   14,    2,  -17 },
-/* 0xE1 */ {  5258,   12,   13,   14,    1,  -13 },
-/* 0xE2 */ {  5278,   11,   22,   14,    2,  -17 },
-/* 0xE3 */ {  5309,   12,   18,   11,   -1,  -13 },
-/* 0xE4 */ {  5336,   11,   17,   13,    1,  -17 },
-/* 0xE5 */ {  5360,    9,   13,   11,    1,  -13 },
-/* 0xE6 */ {  5375,    9,   22,   11,    1,  -17 },
-/* 0xE7 */ {  5400,   10,   18,   14,    2,  -13 },
-/* 0xE8 */ {  5423,   11,   17,   13,    1,  -17 },
-/* 0xE9 */ {  5447,    2,   13,    6,    2,  -13 },
-/* 0xEA */ {  5451,   10,   13,   12,    2,  -13 },
-/* 0xEB */ {  5468,   13,   17,   12,   -1,  -17 },
-/* 0xEC */ {  5496,   10,   18,   14,    2,  -13 },
-/* 0xED */ {  5519,   11,   13,   11,    0,  -13 },
-/* 0xEE */ {  5537,    9,   22,   11,    1,  -17 },
-/* 0xEF */ {  5562,   11,   13,   13,    1,  -13 },
-/* 0xF0 */ {  5580,   16,   13,   17,    0,  -13 },
-/* 0xF1 */ {  5606,   11,   18,   14,    2,  -13 },
-/* 0xF2 */ {  5631,   11,   18,   12,    1,  -13 },
-/* 0xF3 */ {  5656,   13,   13,   15,    1,  -13 },
-/* 0xF4 */ {  5678,    6,   13,    9,    1,  -13 },
-/* 0xF5 */ {  5688,   10,   13,   14,    2,  -13 },
-/* 0xF6 */ {  5705,   14,   18,   16,    1,  -13 },
-/* 0xF7 */ {  5737,   13,   18,   13,    0,  -13 },
-/* 0xF8 */ {  5767,   14,   18,   18,    2,  -13 },
-/* 0xF9 */ {  5799,   16,   13,   18,    1,  -13 },
-/* 0xFA */ {  5825,    6,   16,    6,    0,  -16 },
-/* 0xFB */ {  5837,   10,   16,   14,    2,  -16 },
-/* 0xFC */ {  5857,   11,   17,   13,    1,  -17 },
-/* 0xFD */ {  5881,   10,   17,   14,    2,  -17 },
-/* 0xFE */ {  5903,   16,   17,   18,    1,  -17 },
-/* 0xFF */ {  5937,    0,    0,    5,    0,    0 },
-};
-
-const GFXfont FreeSans12pt_Win1253 PROGMEM = {
-(uint8_t*)FreeSans12pt_Win1253Bitmaps,
-(GFXglyph*)FreeSans12pt_Win1253Glyphs,
-0x01, 0xFF, 19
-};

src/graphics/niche/Fonts/FreeSans6pt_Win1253.h

@@ -1,527 +0,0 @@
-// trunk-ignore-all(clang-format)
-#pragma once
-/* PROPERTIES
-
-FONT_NAME FreeSans6pt_Win1253
-*/
-const uint8_t FreeSans6pt_Win1253Bitmaps[] PROGMEM = {
-/* 0x01 */ 0x1C, 0x0A, 0x05, 0x04, 0xFE, 0x08, 0x1C, 0x02, 0x07, 0xE0, 0x9F, 0xC0,
-/* 0x02 */ 0x3F, 0xF0, 0x40, 0xE0, 0x10, 0x3F, 0x04, 0x9E, 0x28, 0x14, 0x0E, 0x00,
-/* 0x03 */ 0x3F, 0x10, 0x28, 0x06, 0x49, 0x80, 0x60, 0x19, 0x26, 0x31, 0x40, 0x8F, 0xC0,
-/* 0x04 */ 0x3F, 0x10, 0x2A, 0x16, 0x49, 0xA1, 0x60, 0x19, 0xE6, 0x31, 0x40, 0x8F, 0xC0,
-/* 0x05 */ 0x28, 0x15, 0x2A, 0xB5, 0x55, 0xA8, 0x54, 0x12, 0x04, 0x41, 0x08, 0x81, 0xC0,
-/* 0x06 */ 0x04, 0x08, 0x88, 0x82, 0x07, 0x01, 0x11, 0xA2, 0xC4, 0x40, 0x70, 0x20, 0x88, 0x88, 0x10, 0x00,
-/* 0x07 */
-/* 0x08 */ 0x03, 0x83, 0x44, 0x48, 0x28, 0x01, 0x80, 0x17, 0xFE, 0x08, 0x45, 0x28, 0x84, 0x00,
-/* 0x09 */ 0x01, 0xC0, 0x68, 0x82, 0x41, 0x10, 0x02, 0x80, 0x06, 0x00, 0x14, 0x00, 0x8F, 0xFC,
-/* 0x0A */
-/* 0x0B */ 0x22, 0x2A, 0xA2, 0x30, 0x18, 0x0A, 0x09, 0x04, 0x44, 0x14, 0x04, 0x00,
-/* 0x0C */ 0x46, 0x00, 0x19, 0x03, 0x21, 0x20, 0x93, 0x04, 0x20, 0x11, 0x80, 0x50, 0x02, 0x7F, 0xE0,
-/* 0x0D */
-/* 0x0E */ 0x08, 0x0E, 0x08, 0x88, 0x24, 0x12, 0x09, 0x05, 0x01, 0xFF, 0x8A, 0x02, 0x00,
-/* 0x0F */ 0x3F, 0x14, 0xAA, 0x16, 0x01, 0x92, 0x60, 0x18, 0xC6, 0x49, 0x40, 0x8F, 0xC0,
-/* 0x10 */ 0x1B, 0x02, 0xA0, 0x54, 0x12, 0x42, 0x48, 0x49, 0x31, 0x1E, 0x23, 0xEA, 0xFE, 0x3C,
-/* 0x11 */ 0x3F, 0x02, 0x00, 0x20, 0x6D, 0x27, 0xF8, 0x3F, 0xC1, 0xFE, 0x37, 0xD0, 0xBE, 0x40, 0xE1, 0xE2, 0x00,
-/* 0x12 */ 0x12, 0x42, 0x20, 0x24, 0xC0, 0x29, 0x99, 0x05, 0x23, 0x30, 0xB0, 0x30, 0x00,
-/* 0x13 */ 0x3F, 0x88, 0x0A, 0x44, 0xD5, 0x58, 0x03, 0x00, 0x67, 0xCC, 0x71, 0x40, 0x47, 0xF0,
-/* 0x14 */ 0x3F, 0x18, 0x69, 0x26, 0x85, 0xA1, 0x6C, 0xD8, 0x06, 0x31, 0x40, 0x8F, 0xC0,
-/* 0x15 */ 0x3F, 0x11, 0x00, 0xE8, 0x03, 0xA0, 0x1F, 0xB3, 0x7E, 0x00, 0xE9, 0xE0, 0x23, 0x00, 0x40, 0x40, 0xFE, 0x00,
-/* 0x16 */ 0x30, 0x38, 0x3A, 0x3E, 0x6E, 0xEB, 0xC3, 0xC3, 0x66, 0x3C,
-/* 0x17 */ 0x3F, 0x04, 0x00, 0x82, 0x88, 0x5C, 0xA4, 0x49, 0x22, 0x81, 0x98, 0xC4, 0x40, 0xA3, 0xF0,
-/* 0x18 */ 0x07, 0x80, 0x42, 0x04, 0x08, 0x21, 0x41, 0x42, 0x60, 0x0E, 0x8C, 0xB2, 0x89, 0x50, 0x52, 0x82, 0x80,
-/* 0x19 */ 0x3F, 0xC4, 0x02, 0x80, 0x18, 0x01, 0xB3, 0x1B, 0xB9, 0x80, 0x19, 0xE1, 0x40, 0x23, 0xFC,
-/* 0x1A */ 0xFF, 0xC0, 0x67, 0x34, 0x58, 0x4C, 0x46, 0x03, 0x11, 0x80, 0xFF, 0xC0,
-/* 0x1B */ 0x0F, 0xC0, 0x40, 0x82, 0x49, 0x08, 0x04, 0x00, 0x00, 0x12, 0x02, 0x31, 0x34, 0x0B, 0x88, 0x45, 0x00, 0x20,
-/* 0x1C */ 0x3F, 0x88, 0x0A, 0x44, 0xC9, 0x19, 0x3B, 0x00, 0x60, 0x4C, 0x71, 0x40, 0x47, 0xF0,
-/* 0x1D */ 0x3F, 0x8B, 0x0A, 0x00, 0xC8, 0x18, 0x13, 0x00, 0x48, 0xCA, 0xC1, 0x44, 0x53, 0x30,
-/* 0x1E */ 0x19, 0xC2, 0x02, 0x50, 0x1E, 0x49, 0x80, 0x12, 0x01, 0x27, 0x92, 0x01, 0x10, 0x20, 0xFC,
-/* 0x1F */ 0x30, 0x1C, 0x0C, 0x3E, 0x7E, 0xCF, 0x07, 0xC7, 0x7F, 0x3F,
-/* ' ' 0x20 */
-/* '!' 0x21 */ 0xFC, 0x80,
-/* '"' 0x22 */ 0xB6, 0x80,
-/* '#' 0x23 */ 0x24, 0x51, 0xF9, 0x42, 0x9F, 0x92, 0x28,
-/* '$' 0x24 */ 0x10, 0xE5, 0x55, 0x50, 0xE1, 0x65, 0x55, 0xE1, 0x00,
-/* '%' 0x25 */ 0x71, 0x24, 0x89, 0x22, 0x50, 0x74, 0x02, 0x70, 0xA4, 0x49, 0x11, 0xC0,
-/* '&' 0x26 */ 0x71, 0x24, 0x9C, 0x62, 0x58, 0xA7, 0xF4,
-/* ''' 0x27 */ 0xE0,
-/* '(' 0x28 */ 0x5A, 0xAA, 0x94,
-/* ')' 0x29 */ 0x89, 0x12, 0x49, 0x29, 0x00,
-/* '*' 0x2A */ 0x5E, 0x80,
-/* '+' 0x2B */ 0x21, 0x3E, 0x42, 0x00,
-/* ',' 0x2C */ 0xE0,
-/* '-' 0x2D */ 0xC0,
-/* '.' 0x2E */ 0x80,
-/* '/' 0x2F */ 0x24, 0xA4, 0xA4, 0x80,
-/* '0' 0x30 */ 0x76, 0xE3, 0x18, 0xC6, 0x3B, 0x70,
-/* '1' 0x31 */ 0x27, 0x92, 0x49, 0x20,
-/* '2' 0x32 */ 0x79, 0x10, 0x41, 0x08, 0xC6, 0x10, 0xFC,
-/* '3' 0x33 */ 0x79, 0x30, 0x43, 0x18, 0x10, 0x71, 0x78,
-/* '4' 0x34 */ 0x08, 0x61, 0x8A, 0x49, 0x2F, 0xC2, 0x08,
-/* '5' 0x35 */ 0xFC, 0x21, 0xE8, 0x84, 0x31, 0xF0,
-/* '6' 0x36 */ 0x74, 0x61, 0xE8, 0xC6, 0x31, 0x70,
-/* '7' 0x37 */ 0xF8, 0x44, 0x22, 0x11, 0x08, 0x40,
-/* '8' 0x38 */ 0x39, 0x34, 0x53, 0x39, 0x1C, 0x51, 0x38,
-/* '9' 0x39 */ 0x39, 0x3C, 0x71, 0x4C, 0xF0, 0x53, 0x78,
-/* ':' 0x3A */ 0x82,
-/* ';' 0x3B */ 0x87,
-/* '<' 0x3C */ 0x3E, 0x30, 0x60, 0x80,
-/* '=' 0x3D */ 0xF8, 0x3E,
-/* '>' 0x3E */ 0xE0, 0xC6, 0xC8, 0x00,
-/* '?' 0x3F */ 0x74, 0x42, 0x11, 0x10, 0x80, 0x20,
-/* '@' 0x40 */ 0x0F, 0x86, 0x19, 0x9A, 0xA4, 0xD9, 0x13, 0x22, 0x56, 0xDA, 0x6E, 0x60, 0x06, 0x00, 0x3C, 0x00,
-/* 'A' 0x41 */ 0x18, 0x18, 0x24, 0x24, 0x24, 0x7E, 0x42, 0x42, 0xC3,
-/* 'B' 0x42 */ 0xFA, 0x18, 0x61, 0xFA, 0x18, 0x61, 0xFC,
-/* 'C' 0x43 */ 0x3E, 0x63, 0x40, 0x40, 0xC0, 0x40, 0x41, 0x63, 0x3E,
-/* 'D' 0x44 */ 0xF9, 0x0A, 0x1C, 0x18, 0x30, 0x61, 0xC2, 0xF8,
-/* 'E' 0x45 */ 0xFE, 0x08, 0x20, 0xFE, 0x08, 0x20, 0xFC,
-/* 'F' 0x46 */ 0xFE, 0x08, 0x20, 0xFA, 0x08, 0x20, 0x80,
-/* 'G' 0x47 */ 0x1E, 0x61, 0x40, 0x40, 0xC7, 0x41, 0x41, 0x63, 0x1D,
-/* 'H' 0x48 */ 0x83, 0x06, 0x0C, 0x1F, 0xF0, 0x60, 0xC1, 0x82,
-/* 'I' 0x49 */ 0xFF, 0x80,
-/* 'J' 0x4A */ 0x08, 0x42, 0x10, 0x87, 0x29, 0x70,
-/* 'K' 0x4B */ 0x85, 0x12, 0x45, 0x0D, 0x13, 0x22, 0x42, 0x86,
-/* 'L' 0x4C */ 0x84, 0x21, 0x08, 0x42, 0x10, 0xF8,
-/* 'M' 0x4D */ 0xC3, 0xC3, 0xC3, 0xA5, 0xA5, 0xA5, 0x99, 0x99, 0x99,
-/* 'N' 0x4E */ 0x83, 0x86, 0x8D, 0x19, 0x33, 0x62, 0xC3, 0x86,
-/* 'O' 0x4F */ 0x1E, 0x31, 0x90, 0x68, 0x1C, 0x0A, 0x05, 0x06, 0xC6, 0x1E, 0x00,
-/* 'P' 0x50 */ 0xFA, 0x18, 0x61, 0xFA, 0x08, 0x20, 0x80,
-/* 'Q' 0x51 */ 0x1E, 0x31, 0x90, 0x68, 0x1C, 0x0A, 0x05, 0x16, 0xC6, 0x1F, 0x00, 0x40,
-/* 'R' 0x52 */ 0xFD, 0x0E, 0x1C, 0x2F, 0x90, 0xA1, 0x42, 0x86,
-/* 'S' 0x53 */ 0x7A, 0x18, 0x30, 0x78, 0x38, 0x61, 0x78,
-/* 'T' 0x54 */ 0xFE, 0x20, 0x40, 0x81, 0x02, 0x04, 0x08, 0x10,
-/* 'U' 0x55 */ 0x83, 0x06, 0x0C, 0x18, 0x30, 0x60, 0xE2, 0x78,
-/* 'V' 0x56 */ 0xC2, 0x85, 0x0B, 0x22, 0x44, 0x8E, 0x0C, 0x18,
-/* 'W' 0x57 */ 0xC4, 0x28, 0xCD, 0x29, 0x25, 0x24, 0xA4, 0x52, 0x8C, 0x61, 0x8C, 0x31, 0x80,
-/* 'X' 0x58 */ 0x87, 0x34, 0x8C, 0x30, 0xC4, 0xA3, 0x84,
-/* 'Y' 0x59 */ 0xC3, 0x42, 0x24, 0x34, 0x18, 0x08, 0x08, 0x08, 0x08,
-/* 'Z' 0x5A */ 0x7E, 0x0C, 0x30, 0x41, 0x06, 0x18, 0x20, 0xFE,
-/* '[' 0x5B */ 0xEA, 0xAA, 0xAB,
-/* '\' 0x5C */ 0x92, 0x24, 0x89, 0x20,
-/* ']' 0x5D */ 0xD5, 0x55, 0x57,
-/* '^' 0x5E */ 0x46, 0xA9,
-/* '_' 0x5F */ 0xFE,
-/* '`' 0x60 */ 0x80,
-/* 'a' 0x61 */ 0x79, 0x20, 0x4F, 0xC6, 0x37, 0x40,
-/* 'b' 0x62 */ 0x84, 0x3D, 0x18, 0xC6, 0x31, 0xF0,
-/* 'c' 0x63 */ 0x39, 0x3C, 0x20, 0xC1, 0x33, 0x80,
-/* 'd' 0x64 */ 0x04, 0x13, 0xD3, 0xC6, 0x1C, 0x53, 0x3C,
-/* 'e' 0x65 */ 0x39, 0x38, 0x7F, 0x81, 0x13, 0x80,
-/* 'f' 0x66 */ 0x6B, 0xA4, 0x92, 0x40,
-/* 'g' 0x67 */ 0x35, 0x3C, 0x61, 0xC5, 0x33, 0x41, 0x4D, 0xE0,
-/* 'h' 0x68 */ 0x84, 0x3D, 0x38, 0xC6, 0x31, 0x88,
-/* 'i' 0x69 */ 0xBF, 0x80,
-/* 'j' 0x6A */ 0x45, 0x55, 0x57,
-/* 'k' 0x6B */ 0x84, 0x25, 0x4E, 0x52, 0xD2, 0x88,
-/* 'l' 0x6C */ 0xFF, 0x80,
-/* 'm' 0x6D */ 0xF7, 0x99, 0x91, 0x91, 0x91, 0x91, 0x91,
-/* 'n' 0x6E */ 0xF4, 0x63, 0x18, 0xC6, 0x20,
-/* 'o' 0x6F */ 0x39, 0x3C, 0x61, 0xC5, 0x33, 0x80,
-/* 'p' 0x70 */ 0xF4, 0x63, 0x18, 0xC7, 0xD0, 0x80,
-/* 'q' 0x71 */ 0x3D, 0x3C, 0x61, 0xC5, 0x37, 0x41, 0x04,
-/* 'r' 0x72 */ 0xF2, 0x49, 0x20,
-/* 's' 0x73 */ 0x7A, 0x50, 0xE0, 0xE5, 0xE0,
-/* 't' 0x74 */ 0x5D, 0x24, 0x93,
-/* 'u' 0x75 */ 0x8C, 0x63, 0x18, 0xCF, 0xA0,
-/* 'v' 0x76 */ 0x85, 0x24, 0x92, 0x30, 0xC3, 0x00,
-/* 'w' 0x77 */ 0x89, 0x59, 0x59, 0x55, 0x56, 0x26, 0x26,
-/* 'x' 0x78 */ 0x4A, 0x4C, 0x43, 0x27, 0x20,
-/* 'y' 0x79 */ 0x8A, 0x52, 0xA5, 0x18, 0x84, 0x22, 0x00,
-/* 'z' 0x7A */ 0x78, 0x44, 0x46, 0x23, 0xE0,
-/* '{' 0x7B */ 0x6A, 0xAA, 0xA9,
-/* '|' 0x7C */ 0xFF, 0xE0,
-/* '}' 0x7D */ 0x95, 0x55, 0x56,
-/* '~' 0x7E */ 0x66, 0x60,
-/* 0x7F */
-/* 0x80 */ 0x1C, 0x45, 0x07, 0xE4, 0x1F, 0x10, 0x10, 0x1E,
-/* 0x81 */
-/* 0x82 */ 0xE0,
-/* 0x83 */ 0x6B, 0xA4, 0x92, 0x49, 0x60,
-/* 0x84 */ 0xB6, 0x80,
-/* 0x85 */ 0xA8,
-/* 0x86 */ 0x21, 0x09, 0xF2, 0x10, 0x84, 0x21, 0x08,
-/* 0x87 */ 0x21, 0x09, 0xF2, 0x10, 0x84, 0xF9, 0x08,
-/* 0x88 */ 0x54,
-/* 0x89 */ 0x62, 0x09, 0x40, 0x98, 0x06, 0x80, 0x10, 0x01, 0x66, 0x29, 0x92, 0x99, 0x06, 0x60,
-/* 0x8A */ 0x28, 0x47, 0xA1, 0x83, 0x07, 0x83, 0x87, 0x17, 0x80,
-/* 0x8B */ 0x64,
-/* 0x8C */ 0x3B, 0xE8, 0xC2, 0x08, 0x41, 0x08, 0x3F, 0x04, 0x20, 0x82, 0x30, 0x3B, 0xE0,
-/* 0x8D */
-/* 0x8E */ 0x14, 0x11, 0xF8, 0x30, 0xC1, 0x04, 0x18, 0x61, 0xFC,
-/* 0x8F */
-/* 0x90 */
-/* 0x91 */ 0xE0,
-/* 0x92 */ 0xE0,
-/* 0x93 */ 0xB6, 0x80,
-/* 0x94 */ 0xB6, 0x80,
-/* 0x95 */ 0xFF, 0x80,
-/* 0x96 */ 0xFC,
-/* 0x97 */ 0xFF, 0xF0,
-/* 0x98 */ 0xDB,
-/* 0x99 */ 0xE6, 0x28, 0xCD, 0x19, 0xA3, 0x34, 0x6A, 0x8B, 0x51, 0x68,
-/* 0x9A */ 0x52, 0x69, 0x8E, 0x19, 0x60,
-/* 0x9B */ 0x98,
-/* 0x9C */ 0x7B, 0xD9, 0xCE, 0x10, 0xC3, 0xF8, 0x41, 0x9C, 0x5E, 0xF0,
-/* 0x9D */
-/* 0x9E */ 0x51, 0x1E, 0x11, 0x11, 0x88, 0xF8,
-/* 0x9F */ 0x29, 0x05, 0x12, 0x22, 0x87, 0x04, 0x08, 0x10, 0x20,
-/* 0xA0 */
-/* 0xA1 */ 0xBF, 0x80,
-/* 0xA2 */ 0x23, 0xAB, 0x4A, 0x52, 0xAE, 0x20,
-/* 0xA3 */ 0x39, 0x14, 0x10, 0xF0, 0x82, 0x1C, 0x4C,
-/* 0xA4 */ 0xFC, 0x63, 0xF0,
-/* 0xA5 */ 0x8C, 0x54, 0xAF, 0x93, 0xE4, 0x20,
-/* 0xA6 */ 0xF9, 0xF0,
-/* 0xA7 */ 0x32, 0x91, 0xC9, 0x47, 0x26, 0x14, 0xA4, 0xC0,
-/* 0xA8 */ 0xA0,
-/* 0xA9 */ 0x3E, 0x3F, 0xB8, 0xF4, 0x1A, 0x0D, 0x17, 0x76, 0xC6, 0x3E, 0x00,
-/* 0xAA */ 0x61, 0x79, 0x60,
-/* 0xAB */ 0x5A, 0xA5,
-/* 0xAC */ 0xFC, 0x10, 0x40,
-/* 0xAD */
-/* 0xAE */ 0x3E, 0x31, 0xB7, 0x72, 0x99, 0xCC, 0xC7, 0x56, 0xC6, 0x3E, 0x00,
-/* 0xAF */ 0xE0,
-/* 0xB0 */ 0x69, 0x96,
-/* 0xB1 */ 0x21, 0x3E, 0x42, 0x03, 0xE0,
-/* 0xB2 */ 0x69, 0x3C, 0xF0,
-/* 0xB3 */ 0x79, 0x29, 0x70,
-/* 0xB4 */ 0x80,
-/* 0xB5 */ 0x8A, 0x28, 0xA2, 0x8A, 0x6E, 0xE0, 0x80,
-/* 0xB6 */ 0x7F, 0xAE, 0xBA, 0x68, 0xA2, 0x8A, 0x28, 0xA0,
-/* 0xB7 */ 0x80,
-/* 0xB8 */ 0x67, 0x80,
-/* 0xB9 */ 0x75, 0x50,
-/* 0xBA */ 0x69, 0x96, 0xF0,
-/* 0xBB */ 0xA5, 0x5A,
-/* 0xBC */ 0x42, 0x30, 0x84, 0x41, 0x10, 0x48, 0x82, 0x61, 0x28, 0x8F, 0x20, 0x80,
-/* 0xBD */ 0x40, 0x63, 0x11, 0x09, 0x74, 0xA8, 0x84, 0x44, 0x44, 0x43, 0x80,
-/* 0xBE */ 0x71, 0x24, 0x82, 0x20, 0x50, 0x98, 0x9A, 0x61, 0x28, 0x4F, 0x20, 0x80,
-/* 0xBF */ 0x20, 0x08, 0x44, 0x42, 0x11, 0x70,
-/* 0xC0 */ 0x2D, 0x02, 0x22, 0x22, 0x22,
-/* 0xC1 */ 0x10, 0x50, 0xA1, 0x44, 0x4F, 0x91, 0x41, 0x82,
-/* 0xC2 */ 0xFA, 0x18, 0x61, 0xFE, 0x18, 0x61, 0xF8,
-/* 0xC3 */ 0xFE, 0x08, 0x20, 0x82, 0x08, 0x20, 0x80,
-/* 0xC4 */ 0x08, 0x0A, 0x05, 0x02, 0x82, 0x21, 0x11, 0x04, 0x82, 0x7F, 0x00,
-/* 0xC5 */ 0xFE, 0x08, 0x20, 0xFE, 0x08, 0x20, 0xFC,
-/* 0xC6 */ 0x7E, 0x08, 0x20, 0x41, 0x04, 0x08, 0x20, 0xFE,
-/* 0xC7 */ 0x83, 0x06, 0x0C, 0x1F, 0xF0, 0x60, 0xC1, 0x82,
-/* 0xC8 */ 0x38, 0x8A, 0x0C, 0x1B, 0xB0, 0x60, 0xA2, 0x38,
-/* 0xC9 */ 0xFF, 0x80,
-/* 0xCA */ 0x83, 0x0A, 0x24, 0x8A, 0x1A, 0x22, 0x42, 0x82,
-/* 0xCB */ 0x08, 0x0A, 0x05, 0x02, 0x82, 0x21, 0x11, 0x04, 0x82, 0x41, 0x00,
-/* 0xCC */ 0x83, 0x8F, 0x1D, 0x5A, 0xB5, 0x6A, 0xC9, 0x92,
-/* 0xCD */ 0x83, 0x86, 0x8D, 0x19, 0x31, 0x62, 0xC3, 0x82,
-/* 0xCE */ 0xFC, 0x00, 0x00, 0x78, 0x00, 0x00, 0xFC,
-/* 0xCF */ 0x38, 0x8A, 0x0C, 0x18, 0x30, 0x60, 0xA2, 0x38,
-/* 0xD0 */ 0xFF, 0x06, 0x0C, 0x18, 0x30, 0x60, 0xC1, 0x82,
-/* 0xD1 */ 0xFA, 0x18, 0x61, 0xFA, 0x08, 0x20, 0x80,
-/* 0xD2 */
-/* 0xD3 */ 0xFE, 0x04, 0x08, 0x10, 0x84, 0x20, 0xFC,
-/* 0xD4 */ 0xFE, 0x20, 0x40, 0x81, 0x02, 0x04, 0x08, 0x10,
-/* 0xD5 */ 0x82, 0x89, 0x11, 0x41, 0x02, 0x04, 0x08, 0x10,
-/* 0xD6 */ 0x10, 0xFA, 0x4C, 0x99, 0x32, 0x64, 0xBE, 0x10,
-/* 0xD7 */ 0x82, 0x89, 0x11, 0x41, 0x05, 0x11, 0x22, 0x82,
-/* 0xD8 */ 0x93, 0x26, 0x4C, 0x99, 0x2F, 0x84, 0x08, 0x10,
-/* 0xD9 */ 0x38, 0x8A, 0x0C, 0x18, 0x30, 0x60, 0xA2, 0xEE,
-/* 0xDA */ 0xA1, 0x24, 0x92, 0x49, 0x00,
-/* 0xDB */ 0x28, 0x02, 0x0A, 0x24, 0x45, 0x04, 0x08, 0x10, 0x20, 0x40,
-/* 0xDC */ 0x11, 0x00, 0xD9, 0x4A, 0x52, 0x93, 0x40,
-/* 0xDD */ 0x11, 0x00, 0xF8, 0x41, 0x90, 0x83, 0xC0,
-/* 0xDE */ 0x11, 0x01, 0x6C, 0xC6, 0x31, 0x8C, 0x42, 0x10,
-/* 0xDF */ 0x62, 0xAA, 0xA0,
-/* 0xE0 */ 0x25, 0x81, 0x18, 0xC6, 0x31, 0x8B, 0x80,
-/* 0xE1 */ 0x6C, 0xA5, 0x29, 0x49, 0xA0,
-/* 0xE2 */ 0x74, 0x63, 0x1B, 0x46, 0x39, 0xB4, 0x20,
-/* 0xE3 */ 0x44, 0x89, 0x11, 0x42, 0x85, 0x04, 0x08, 0x10,
-/* 0xE4 */ 0x71, 0x1D, 0x18, 0xC6, 0x31, 0x70,
-/* 0xE5 */ 0x7C, 0x20, 0xC8, 0x41, 0xE0,
-/* 0xE6 */ 0x72, 0x44, 0x88, 0x88, 0x71, 0x20,
-/* 0xE7 */ 0xB6, 0x63, 0x18, 0xC6, 0x21, 0x08,
-/* 0xE8 */ 0x74, 0x63, 0x1F, 0xC6, 0x31, 0x70,
-/* 0xE9 */ 0xFE,
-/* 0xEA */ 0x8A, 0x4A, 0x38, 0x92, 0x48, 0x80,
-/* 0xEB */ 0x20, 0x41, 0x04, 0x28, 0xA2, 0x91, 0x44,
-/* 0xEC */ 0x8C, 0x63, 0x18, 0xC7, 0xF0, 0x80,
-/* 0xED */ 0x8C, 0x54, 0xA5, 0x10, 0x80,
-/* 0xEE */ 0x68, 0x86, 0x48, 0x88, 0x71, 0x20,
-/* 0xEF */ 0x74, 0x63, 0x18, 0xC5, 0xC0,
-/* 0xF0 */ 0xFF, 0x24, 0x24, 0x24, 0x24, 0x24, 0x24,
-/* 0xF1 */ 0x74, 0x63, 0x18, 0xC7, 0xD0, 0x80,
-/* 0xF2 */ 0x34, 0x88, 0x88, 0x71, 0x60,
-/* 0xF3 */ 0x7F, 0x12, 0x24, 0x48, 0x91, 0x1C, 0x00,
-/* 0xF4 */ 0xE9, 0x24, 0x90,
-/* 0xF5 */ 0x8C, 0x63, 0x18, 0xC5, 0xC0,
-/* 0xF6 */ 0x5A, 0x59, 0x65, 0x95, 0x53, 0x84, 0x10,
-/* 0xF7 */ 0x49, 0x24, 0x8C, 0x30, 0xC4, 0x92, 0x48,
-/* 0xF8 */ 0x93, 0x26, 0x4C, 0x99, 0x32, 0x5F, 0x08, 0x10,
-/* 0xF9 */ 0x45, 0x06, 0x4C, 0x99, 0x32, 0x5B, 0x00,
-/* 0xFA */ 0xA1, 0x24, 0x92, 0x40,
-/* 0xFB */ 0x50, 0x23, 0x18, 0xC6, 0x31, 0x70,
-/* 0xFC */ 0x11, 0x00, 0xE8, 0xC6, 0x31, 0x8B, 0x80,
-/* 0xFD */ 0x21, 0x01, 0x18, 0xC6, 0x31, 0x8B, 0x80,
-/* 0xFE */ 0x08, 0x20, 0x02, 0x28, 0x32, 0x64, 0xC9, 0x92, 0xD8,
-/* 0xFF */
-};
-
-const GFXglyph FreeSans6pt_Win1253Glyphs[] PROGMEM = {
-/* 0x01 */ {     0,    9,   10,   11,    1,   -9 },
-/* 0x02 */ {    12,    9,   10,   11,    1,   -8 },
-/* 0x03 */ {    24,   10,   10,   12,    1,   -8 },
-/* 0x04 */ {    37,   10,   10,   12,    1,   -8 },
-/* 0x05 */ {    50,   10,   10,   12,    1,   -9 },
-/* 0x06 */ {    63,   11,   11,   13,    1,   -9 },
-/* 0x07 */ {    79,    0,    0,    8,    0,    0 },
-/* 0x08 */ {    79,   12,    9,   14,    1,   -8 },
-/* 0x09 */ {    93,   14,    8,   16,    1,   -7 },
-/* 0x0A */ {   107,    0,    0,    8,    0,    0 },
-/* 0x0B */ {   107,    9,   10,   11,    1,   -9 },
-/* 0x0C */ {   119,   13,    9,   15,    1,   -8 },
-/* 0x0D */ {   134,    0,    0,    8,    0,    0 },
-/* 0x0E */ {   134,    9,   11,   11,    1,   -9 },
-/* 0x0F */ {   147,   10,   10,   12,    1,   -9 },
-/* 0x10 */ {   160,   11,   10,   13,    1,   -9 },
-/* 0x11 */ {   174,   13,   10,   15,    1,   -9 },
-/* 0x12 */ {   191,   10,   10,   12,    1,   -9 },
-/* 0x13 */ {   204,   11,   10,   13,    1,   -9 },
-/* 0x14 */ {   218,   10,   10,   12,    1,   -9 },
-/* 0x15 */ {   231,   14,   10,   16,    1,   -9 },
-/* 0x16 */ {   249,    8,   10,   10,    1,   -9 },
-/* 0x17 */ {   259,   12,   10,   14,    1,   -9 },
-/* 0x18 */ {   274,   13,   10,   15,    1,   -9 },
-/* 0x19 */ {   291,   12,   10,   14,    1,   -9 },
-/* 0x1A */ {   306,    9,   10,   11,    1,   -8 },
-/* 0x1B */ {   318,   14,   10,   16,    1,   -9 },
-/* 0x1C */ {   336,   11,   10,   13,    1,   -9 },
-/* 0x1D */ {   350,   11,   10,   13,    1,   -9 },
-/* 0x1E */ {   364,   12,   10,   14,    1,   -9 },
-/* 0x1F */ {   379,    8,   10,   11,    2,   -9 },
-/* ' ' 0x20 */ {   389,    0,    0,    3,    0,    0 },
-/* '!' 0x21 */ {   389,    1,    9,    4,    2,   -8 },
-/* '"' 0x22 */ {   391,    3,    3,    4,    0,   -8 },
-/* '#' 0x23 */ {   393,    7,    8,    7,    0,   -7 },
-/* '$' 0x24 */ {   400,    6,   11,    7,    0,   -9 },
-/* '%' 0x25 */ {   409,   10,    9,   11,    0,   -8 },
-/* '&' 0x26 */ {   421,    6,    9,    8,    1,   -8 },
-/* ''' 0x27 */ {   428,    1,    3,    2,    1,   -8 },
-/* '(' 0x28 */ {   429,    2,   11,    4,    1,   -8 },
-/* ')' 0x29 */ {   432,    3,   11,    4,    0,   -8 },
-/* '*' 0x2A */ {   437,    3,    3,    5,    1,   -8 },
-/* '+' 0x2B */ {   439,    5,    5,    7,    1,   -4 },
-/* ',' 0x2C */ {   443,    1,    3,    3,    1,    0 },
-/* '-' 0x2D */ {   444,    2,    1,    4,    1,   -3 },
-/* '.' 0x2E */ {   445,    1,    1,    3,    1,    0 },
-/* '/' 0x2F */ {   446,    3,    9,    3,    0,   -8 },
-/* '0' 0x30 */ {   450,    5,    9,    7,    1,   -8 },
-/* '1' 0x31 */ {   456,    3,    9,    7,    1,   -8 },
-/* '2' 0x32 */ {   460,    6,    9,    7,    0,   -8 },
-/* '3' 0x33 */ {   467,    6,    9,    7,    0,   -8 },
-/* '4' 0x34 */ {   474,    6,    9,    7,    0,   -8 },
-/* '5' 0x35 */ {   481,    5,    9,    7,    1,   -8 },
-/* '6' 0x36 */ {   487,    5,    9,    7,    1,   -8 },
-/* '7' 0x37 */ {   493,    5,    9,    7,    1,   -8 },
-/* '8' 0x38 */ {   499,    6,    9,    7,    0,   -8 },
-/* '9' 0x39 */ {   506,    6,    9,    7,    0,   -8 },
-/* ':' 0x3A */ {   513,    1,    7,    3,    1,   -6 },
-/* ';' 0x3B */ {   514,    1,    8,    3,    1,   -5 },
-/* '<' 0x3C */ {   515,    5,    5,    7,    1,   -4 },
-/* '=' 0x3D */ {   519,    5,    3,    7,    1,   -3 },
-/* '>' 0x3E */ {   521,    5,    5,    7,    1,   -4 },
-/* '?' 0x3F */ {   525,    5,    9,    7,    1,   -8 },
-/* '@' 0x40 */ {   531,   11,   11,   12,    0,   -8 },
-/* 'A' 0x41 */ {   547,    8,    9,    8,    0,   -8 },
-/* 'B' 0x42 */ {   556,    6,    9,    8,    1,   -8 },
-/* 'C' 0x43 */ {   563,    8,    9,    9,    0,   -8 },
-/* 'D' 0x44 */ {   572,    7,    9,    8,    1,   -8 },
-/* 'E' 0x45 */ {   580,    6,    9,    8,    1,   -8 },
-/* 'F' 0x46 */ {   587,    6,    9,    7,    1,   -8 },
-/* 'G' 0x47 */ {   594,    8,    9,    9,    0,   -8 },
-/* 'H' 0x48 */ {   603,    7,    9,    9,    1,   -8 },
-/* 'I' 0x49 */ {   611,    1,    9,    3,    1,   -8 },
-/* 'J' 0x4A */ {   613,    5,    9,    6,    0,   -8 },
-/* 'K' 0x4B */ {   619,    7,    9,    8,    1,   -8 },
-/* 'L' 0x4C */ {   627,    5,    9,    7,    1,   -8 },
-/* 'M' 0x4D */ {   633,    8,    9,   10,    1,   -8 },
-/* 'N' 0x4E */ {   642,    7,    9,    9,    1,   -8 },
-/* 'O' 0x4F */ {   650,    9,    9,    9,    0,   -8 },
-/* 'P' 0x50 */ {   661,    6,    9,    8,    1,   -8 },
-/* 'Q' 0x51 */ {   668,    9,   10,    9,    0,   -8 },
-/* 'R' 0x52 */ {   680,    7,    9,    9,    1,   -8 },
-/* 'S' 0x53 */ {   688,    6,    9,    8,    1,   -8 },
-/* 'T' 0x54 */ {   695,    7,    9,    8,    0,   -8 },
-/* 'U' 0x55 */ {   703,    7,    9,    9,    1,   -8 },
-/* 'V' 0x56 */ {   711,    7,    9,    8,    0,   -8 },
-/* 'W' 0x57 */ {   719,   11,    9,   11,    0,   -8 },
-/* 'X' 0x58 */ {   732,    6,    9,    8,    1,   -8 },
-/* 'Y' 0x59 */ {   739,    8,    9,    8,    0,   -8 },
-/* 'Z' 0x5A */ {   748,    7,    9,    7,    0,   -8 },
-/* '[' 0x5B */ {   756,    2,   12,    3,    1,   -8 },
-/* '\' 0x5C */ {   759,    3,    9,    3,    0,   -8 },
-/* ']' 0x5D */ {   763,    2,   12,    3,    0,   -8 },
-/* '^' 0x5E */ {   766,    4,    4,    6,    1,   -8 },
-/* '_' 0x5F */ {   768,    7,    1,    7,    0,    2 },
-/* '`' 0x60 */ {   769,    1,    1,    3,    1,   -8 },
-/* 'a' 0x61 */ {   770,    6,    7,    7,    0,   -6 },
-/* 'b' 0x62 */ {   776,    5,    9,    7,    1,   -8 },
-/* 'c' 0x63 */ {   782,    6,    7,    6,    0,   -6 },
-/* 'd' 0x64 */ {   788,    6,    9,    7,    0,   -8 },
-/* 'e' 0x65 */ {   795,    6,    7,    6,    0,   -6 },
-/* 'f' 0x66 */ {   801,    3,    9,    3,    0,   -8 },
-/* 'g' 0x67 */ {   805,    6,   10,    7,    0,   -6 },
-/* 'h' 0x68 */ {   813,    5,    9,    6,    1,   -8 },
-/* 'i' 0x69 */ {   819,    1,    9,    3,    1,   -8 },
-/* 'j' 0x6A */ {   821,    2,   12,    3,    0,   -8 },
-/* 'k' 0x6B */ {   824,    5,    9,    6,    1,   -8 },
-/* 'l' 0x6C */ {   830,    1,    9,    3,    1,   -8 },
-/* 'm' 0x6D */ {   832,    8,    7,   10,    1,   -6 },
-/* 'n' 0x6E */ {   839,    5,    7,    6,    1,   -6 },
-/* 'o' 0x6F */ {   844,    6,    7,    6,    0,   -6 },
-/* 'p' 0x70 */ {   850,    5,    9,    7,    1,   -6 },
-/* 'q' 0x71 */ {   856,    6,    9,    7,    0,   -6 },
-/* 'r' 0x72 */ {   863,    3,    7,    4,    1,   -6 },
-/* 's' 0x73 */ {   866,    5,    7,    6,    0,   -6 },
-/* 't' 0x74 */ {   871,    3,    8,    3,    0,   -7 },
-/* 'u' 0x75 */ {   874,    5,    7,    6,    1,   -6 },
-/* 'v' 0x76 */ {   879,    6,    7,    6,    0,   -6 },
-/* 'w' 0x77 */ {   885,    8,    7,    9,    0,   -6 },
-/* 'x' 0x78 */ {   892,    5,    7,    6,    0,   -6 },
-/* 'y' 0x79 */ {   897,    5,   10,    6,    0,   -6 },
-/* 'z' 0x7A */ {   904,    5,    7,    6,    0,   -6 },
-/* '{' 0x7B */ {   909,    2,   12,    4,    1,   -8 },
-/* '|' 0x7C */ {   912,    1,   11,    3,    1,   -8 },
-/* '}' 0x7D */ {   914,    2,   12,    4,    1,   -8 },
-/* '~' 0x7E */ {   917,    6,    2,    6,    0,   -4 },
-/* 0x7F */ {   919,    0,    0,    0,    0,    0 },
-/* 0x80 */ {   919,    7,    9,    8,    0,   -8 },
-/* 0x81 */ {   927,    0,    0,    8,    0,    0 },
-/* 0x82 */ {   927,    1,    3,    3,    1,    0 },
-/* 0x83 */ {   928,    3,   12,    3,    0,   -8 },
-/* 0x84 */ {   933,    3,    3,    5,    1,    0 },
-/* 0x85 */ {   935,    5,    1,    7,    1,    0 },
-/* 0x86 */ {   936,    5,   11,    7,    1,   -8 },
-/* 0x87 */ {   943,    5,   11,    7,    1,   -8 },
-/* 0x88 */ {   950,    3,    2,    4,    0,   -9 },
-/* 0x89 */ {   951,   12,    9,   12,    0,   -8 },
-/* 0x8A */ {   965,    6,   11,    8,    1,   -9 },
-/* 0x8B */ {   974,    2,    3,    4,    1,   -4 },
-/* 0x8C */ {   975,   11,    9,   12,    0,   -8 },
-/* 0x8D */ {   988,    0,    0,    8,    0,    0 },
-/* 0x8E */ {   988,    7,   10,    7,    0,   -9 },
-/* 0x8F */ {   997,    0,    0,    8,    0,    0 },
-/* 0x90 */ {   997,    0,    0,    8,    0,    0 },
-/* 0x91 */ {   997,    1,    3,    3,    1,   -8 },
-/* 0x92 */ {   998,    1,    3,    2,    1,   -8 },
-/* 0x93 */ {   999,    3,    3,    5,    1,   -8 },
-/* 0x94 */ {  1001,    3,    3,    5,    1,   -8 },
-/* 0x95 */ {  1003,    3,    3,    5,    1,   -5 },
-/* 0x96 */ {  1005,    6,    1,    6,    0,   -3 },
-/* 0x97 */ {  1006,   12,    1,   12,    0,   -3 },
-/* 0x98 */ {  1008,    4,    2,    4,    0,   -8 },
-/* 0x99 */ {  1009,   11,    7,   12,    1,   -8 },
-/* 0x9A */ {  1019,    4,    9,    6,    1,   -8 },
-/* 0x9B */ {  1024,    2,    3,    3,    1,   -4 },
-/* 0x9C */ {  1025,   11,    7,   11,    0,   -6 },
-/* 0x9D */ {  1035,    0,    0,    8,    0,    0 },
-/* 0x9E */ {  1035,    5,    9,    6,    0,   -8 },
-/* 0x9F */ {  1041,    7,   10,    8,    1,   -9 },
-/* 0xA0 */ {  1050,    0,    0,    3,    0,    0 },
-/* 0xA1 */ {  1050,    1,    9,    4,    1,   -5 },
-/* 0xA2 */ {  1052,    5,    9,    7,    1,   -7 },
-/* 0xA3 */ {  1058,    6,    9,    7,    0,   -8 },
-/* 0xA4 */ {  1065,    5,    4,    7,    1,   -5 },
-/* 0xA5 */ {  1068,    5,    9,    7,    1,   -8 },
-/* 0xA6 */ {  1074,    1,   12,    3,    1,   -8 },
-/* 0xA7 */ {  1076,    5,   12,    7,    1,   -8 },
-/* 0xA8 */ {  1084,    3,    1,    4,    0,   -7 },
-/* 0xA9 */ {  1085,    9,    9,   10,    0,   -8 },
-/* 0xAA */ {  1096,    4,    5,    4,    0,   -8 },
-/* 0xAB */ {  1099,    4,    4,    6,    1,   -4 },
-/* 0xAC */ {  1101,    6,    3,    7,    1,   -4 },
-/* 0xAD */ {  1104,    0,    0,    0,    0,    0 },
-/* 0xAE */ {  1104,    9,    9,   10,    0,   -8 },
-/* 0xAF */ {  1115,    3,    1,    4,    0,   -8 },
-/* 0xB0 */ {  1116,    4,    4,    7,    2,   -8 },
-/* 0xB1 */ {  1118,    5,    7,    7,    1,   -6 },
-/* 0xB2 */ {  1123,    4,    5,    4,    0,   -9 },
-/* 0xB3 */ {  1126,    4,    5,    4,    0,   -9 },
-/* 0xB4 */ {  1129,    1,    1,    4,    1,   -8 },
-/* 0xB5 */ {  1130,    6,    9,    7,    1,   -6 },
-/* 0xB6 */ {  1137,    6,   10,    6,    1,   -8 },
-/* 0xB7 */ {  1145,    1,    1,    3,    1,   -2 },
-/* 0xB8 */ {  1146,    3,    3,    4,    1,    1 },
-/* 0xB9 */ {  1148,    2,    6,    4,    1,   -9 },
-/* 0xBA */ {  1150,    4,    5,    4,    0,   -8 },
-/* 0xBB */ {  1153,    4,    4,    6,    1,   -5 },
-/* 0xBC */ {  1155,   10,    9,   10,    1,   -8 },
-/* 0xBD */ {  1167,    9,    9,   10,    1,   -8 },
-/* 0xBE */ {  1178,   10,    9,   11,    0,   -8 },
-/* 0xBF */ {  1190,    5,    9,    7,    1,   -5 },
-/* 0xC0 */ {  1196,    4,   10,    3,   -1,  -10 },
-/* 0xC1 */ {  1201,    7,    9,    7,    0,   -9 },
-/* 0xC2 */ {  1209,    6,    9,    8,    1,   -9 },
-/* 0xC3 */ {  1216,    6,    9,    7,    1,   -9 },
-/* 0xC4 */ {  1223,    9,    9,    7,   -1,   -9 },
-/* 0xC5 */ {  1234,    6,    9,    8,    1,   -9 },
-/* 0xC6 */ {  1241,    7,    9,    7,    0,   -9 },
-/* 0xC7 */ {  1249,    7,    9,    9,    1,   -9 },
-/* 0xC8 */ {  1257,    7,    9,    9,    1,   -9 },
-/* 0xC9 */ {  1265,    1,    9,    3,    1,   -9 },
-/* 0xCA */ {  1267,    7,    9,    8,    1,   -9 },
-/* 0xCB */ {  1275,    9,    9,    7,   -1,   -9 },
-/* 0xCC */ {  1286,    7,    9,    9,    1,   -9 },
-/* 0xCD */ {  1294,    7,    9,    9,    1,   -9 },
-/* 0xCE */ {  1302,    6,    9,    8,    1,   -9 },
-/* 0xCF */ {  1309,    7,    9,    9,    1,   -9 },
-/* 0xD0 */ {  1317,    7,    9,    9,    1,   -9 },
-/* 0xD1 */ {  1325,    6,    9,    8,    1,   -9 },
-/* 0xD2 */ {  1332,    0,    0,    5,    0,    0 },
-/* 0xD3 */ {  1332,    6,    9,    7,    1,   -9 },
-/* 0xD4 */ {  1339,    7,    9,    7,    0,   -9 },
-/* 0xD5 */ {  1347,    7,    9,    7,    0,   -9 },
-/* 0xD6 */ {  1355,    7,    9,    9,    1,   -9 },
-/* 0xD7 */ {  1363,    7,    9,    7,    0,   -9 },
-/* 0xD8 */ {  1371,    7,    9,    9,    1,   -9 },
-/* 0xD9 */ {  1379,    7,    9,    9,    1,   -9 },
-/* 0xDA */ {  1387,    3,   11,    3,    0,  -11 },
-/* 0xDB */ {  1392,    7,   11,    7,    0,  -11 },
-/* 0xDC */ {  1402,    5,   10,    7,    1,  -10 },
-/* 0xDD */ {  1409,    5,   10,    5,    0,  -10 },
-/* 0xDE */ {  1416,    5,   12,    7,    1,  -10 },
-/* 0xDF */ {  1424,    2,   10,    3,    1,  -10 },
-/* 0xE0 */ {  1427,    5,   10,    7,    1,  -10 },
-/* 0xE1 */ {  1434,    5,    7,    7,    1,   -7 },
-/* 0xE2 */ {  1439,    5,   11,    7,    1,   -9 },
-/* 0xE3 */ {  1446,    7,    9,    5,   -1,   -7 },
-/* 0xE4 */ {  1454,    5,    9,    7,    1,   -9 },
-/* 0xE5 */ {  1460,    5,    7,    5,    0,   -7 },
-/* 0xE6 */ {  1465,    4,   11,    5,    1,   -9 },
-/* 0xE7 */ {  1471,    5,    9,    7,    1,   -7 },
-/* 0xE8 */ {  1477,    5,    9,    7,    1,   -9 },
-/* 0xE9 */ {  1483,    1,    7,    3,    1,   -7 },
-/* 0xEA */ {  1484,    6,    7,    7,    1,   -7 },
-/* 0xEB */ {  1490,    6,    9,    5,   -1,   -9 },
-/* 0xEC */ {  1497,    5,    9,    7,    1,   -7 },
-/* 0xED */ {  1503,    5,    7,    5,    0,   -7 },
-/* 0xEE */ {  1508,    4,   11,    5,    1,   -9 },
-/* 0xEF */ {  1514,    5,    7,    7,    1,   -7 },
-/* 0xF0 */ {  1519,    8,    7,    8,    0,   -7 },
-/* 0xF1 */ {  1526,    5,    9,    7,    1,   -7 },
-/* 0xF2 */ {  1532,    4,    9,    6,    1,   -7 },
-/* 0xF3 */ {  1537,    7,    7,    7,    1,   -7 },
-/* 0xF4 */ {  1544,    3,    7,    5,    1,   -7 },
-/* 0xF5 */ {  1547,    5,    7,    7,    1,   -7 },
-/* 0xF6 */ {  1552,    6,    9,    8,    1,   -7 },
-/* 0xF7 */ {  1559,    6,    9,    6,    0,   -7 },
-/* 0xF8 */ {  1566,    7,    9,    9,    1,   -7 },
-/* 0xF9 */ {  1574,    7,    7,    9,    1,   -7 },
-/* 0xFA */ {  1581,    3,    9,    3,    0,   -9 },
-/* 0xFB */ {  1585,    5,    9,    7,    1,   -9 },
-/* 0xFC */ {  1591,    5,   10,    7,    1,  -10 },
-/* 0xFD */ {  1598,    5,   10,    7,    1,  -10 },
-/* 0xFE */ {  1605,    7,   10,    9,    1,  -10 },
-/* 0xFF */ {  1614,    0,    0,    5,    0,    0 },
-};
-
-const GFXfont FreeSans6pt_Win1253 PROGMEM = {
-(uint8_t*)FreeSans6pt_Win1253Bitmaps,
-(GFXglyph*)FreeSans6pt_Win1253Glyphs,
-0x01, 0xFF, 10
-};

src/graphics/niche/Fonts/FreeSans9pt_Win1253.h

@@ -1,527 +0,0 @@
-// trunk-ignore-all(clang-format)
-#pragma once
-/* PROPERTIES
-
-FONT_NAME FreeSans9pt_Win1253
-*/
-const uint8_t FreeSans9pt_Win1253Bitmaps[] PROGMEM = {
-/* 0x01 */ 0x07, 0x00, 0x0A, 0x00, 0x24, 0x00, 0x48, 0x01, 0x10, 0x04, 0x40, 0x10, 0xFF, 0x20, 0x02, 0x81, 0xFD, 0x00, 0x06, 0x07, 0xF4, 0x08, 0x24, 0x0F, 0x88, 0x11, 0x0F, 0xDC, 0x00,
-/* 0x02 */ 0x3F, 0x70, 0x81, 0x11, 0x03, 0xE4, 0x08, 0x28, 0x1F, 0xD0, 0x00, 0x60, 0x7F, 0x20, 0x02, 0x43, 0xFC, 0x44, 0x00, 0x44, 0x00, 0x48, 0x00, 0x90, 0x00, 0xA0, 0x01, 0xC0, 0x00,
-/* 0x03 */ 0x07, 0xC0, 0x30, 0x60, 0x80, 0x22, 0x00, 0x28, 0x00, 0x31, 0x8C, 0x63, 0x18, 0xC0, 0x01, 0x80, 0x03, 0x00, 0x06, 0x20, 0x8C, 0x3E, 0x14, 0x00, 0x44, 0x01, 0x06, 0x0C, 0x03, 0xE0,
-/* 0x04 */ 0x07, 0xC0, 0x30, 0x60, 0x80, 0x22, 0x00, 0x28, 0x82, 0x30, 0x88, 0x62, 0x08, 0xC0, 0x01, 0x80, 0x03, 0x00, 0x06, 0x3F, 0x8C, 0x3E, 0x14, 0x00, 0x44, 0x01, 0x06, 0x0C, 0x03, 0xE0,
-/* 0x05 */ 0x0B, 0x10, 0x14, 0xA8, 0x12, 0x50, 0x29, 0x42, 0x24, 0xA5, 0x32, 0x95, 0x5A, 0x09, 0x48, 0x09, 0x24, 0x01, 0x10, 0x01, 0x48, 0x02, 0xA4, 0x02, 0x42, 0x04, 0x01, 0x98, 0x00, 0x60,
-/* 0x06 */ 0x00, 0x80, 0x22, 0x80, 0x65, 0x00, 0xBE, 0xE1, 0x82, 0x4E, 0x03, 0x24, 0x04, 0x28, 0x06, 0x30, 0x12, 0x20, 0x3C, 0xA0, 0xC3, 0xFE, 0x80, 0x4D, 0x00, 0xA6, 0x01, 0x80, 0x00,
-/* 0x07 */
-/* 0x08 */ 0x00, 0xF8, 0x00, 0x82, 0x00, 0x80, 0x83, 0xE0, 0x41, 0x10, 0x21, 0x04, 0x1B, 0x00, 0x03, 0x00, 0x01, 0x80, 0x00, 0xE0, 0x00, 0x4F, 0xE1, 0xC0, 0x0F, 0x02, 0x00, 0x03, 0x01, 0x00, 0x09, 0x88, 0x0C, 0x0C,
-/* 0x09 */ 0x00, 0xF8, 0x00, 0x82, 0x00, 0x80, 0x83, 0xE0, 0x41, 0x10, 0x21, 0x04, 0x1B, 0x00, 0x03, 0x00, 0x01, 0x80, 0x00, 0xE0, 0x00, 0x4F, 0xE1, 0xC0, 0x0F, 0x00,
-/* 0x0A */
-/* 0x0B */ 0x1C, 0x1C, 0x31, 0xB1, 0x90, 0x50, 0x50, 0x10, 0x18, 0x00, 0x0C, 0x00, 0x06, 0x00, 0x02, 0x80, 0x02, 0x40, 0x01, 0x10, 0x01, 0x04, 0x01, 0x01, 0x01, 0x00, 0x41, 0x00, 0x11, 0x00, 0x07, 0x00, 0x01, 0x00,
-/* 0x0C */ 0x06, 0x00, 0x0A, 0x00, 0x12, 0x00, 0x32, 0x01, 0x84, 0x04, 0x10, 0x08, 0x98, 0x1C, 0x18, 0x40, 0x48, 0x82, 0x11, 0xF0, 0x74, 0x02, 0x18, 0x70, 0x2F, 0x9F, 0x80,
-/* 0x0D */
-/* 0x0E */ 0x01, 0x00, 0x05, 0x00, 0x0A, 0x00, 0x3E, 0x00, 0x82, 0x02, 0x82, 0x06, 0x04, 0x10, 0x04, 0x20, 0x08, 0x40, 0x10, 0xFF, 0x22, 0x00, 0x29, 0xFF, 0x3F, 0x8F, 0xDF, 0x9F, 0x01, 0xC0,
-/* 0x0F */ 0x07, 0xC0, 0x30, 0x60, 0x80, 0x22, 0x00, 0x28, 0x82, 0x36, 0x03, 0x60, 0x00, 0xCC, 0x19, 0xA4, 0x4B, 0x00, 0x06, 0x8E, 0x2B, 0x22, 0x66, 0x7C, 0xCC, 0x71, 0x98, 0x03, 0x00,
-/* 0x10 */ 0x03, 0x80, 0x07, 0x00, 0x0E, 0x00, 0x1E, 0x00, 0x54, 0x00, 0xA8, 0x01, 0x50, 0x02, 0xA0, 0x05, 0x20, 0x32, 0x61, 0xC4, 0x74, 0x49, 0x10, 0x6C, 0x00, 0xD8, 0x01, 0x10, 0x00,
-/* 0x11 */ 0x07, 0xC0, 0x30, 0x60, 0x80, 0x22, 0x40, 0x29, 0x00, 0x31, 0x84, 0x63, 0x18, 0xC0, 0x00, 0x80, 0x15, 0x03, 0x7E, 0x02, 0xFA, 0x04, 0xE4, 0x18, 0x84, 0x00, 0x06, 0x0C, 0x03, 0xE0,
-/* 0x12 */ 0x02, 0x08, 0x01, 0x08, 0x40, 0x10, 0xC0, 0x08, 0xC0, 0x60, 0x80, 0x28, 0x04, 0x12, 0x4C, 0x10, 0x80, 0x08, 0x23, 0x0E, 0x08, 0xC4, 0x82, 0x04, 0x20, 0x83, 0x09, 0x82, 0x47, 0x01, 0x1C, 0x01, 0x30, 0x00, 0xE0, 0x00, 0x00,
-/* 0x13 */ 0x07, 0xC0, 0x30, 0x60, 0x80, 0x22, 0x00, 0x28, 0x00, 0x31, 0x08, 0x65, 0x28, 0xC0, 0x01, 0x80, 0x03, 0x00, 0x06, 0x3F, 0x8C, 0x3E, 0x14, 0x00, 0x44, 0x01, 0x06, 0x0C, 0x03, 0xE0,
-/* 0x14 */ 0x07, 0xC0, 0x30, 0x60, 0x80, 0x22, 0x22, 0x29, 0x83, 0x30, 0x00, 0x65, 0x14, 0xD3, 0x4D, 0xBA, 0xEB, 0x38, 0xE6, 0x00, 0x0A, 0x00, 0x24, 0x38, 0x44, 0x01, 0x07, 0x1C, 0x01, 0xC0,
-/* 0x15 */ 0x07, 0xC0, 0x30, 0x18, 0x80, 0x32, 0x00, 0xF8, 0x01, 0xF1, 0x09, 0xA5, 0x28, 0x40, 0x01, 0x80, 0x03, 0x00, 0x06, 0x3F, 0x8C, 0x3E, 0x14, 0x00, 0x44, 0x01, 0x06, 0x0C, 0x03, 0xE0,
-/* 0x16 */ 0x0C, 0x00, 0xC0, 0x1C, 0x03, 0x80, 0xF8, 0xBB, 0x36, 0xC7, 0x99, 0xF3, 0xFE, 0x3F, 0xC3, 0xF0, 0x7E, 0x0E, 0xC1, 0x8E, 0xE0, 0x20,
-/* 0x17 */ 0x07, 0xC0, 0x30, 0x60, 0x80, 0x22, 0x00, 0x28, 0x00, 0x10, 0x01, 0x20, 0x1D, 0x44, 0x42, 0x84, 0x85, 0x00, 0x86, 0x00, 0xC4, 0x00, 0x44, 0x7C, 0x44, 0x00, 0x06, 0x0C, 0x03, 0xE0,
-/* 0x18 */ 0x01, 0xE0, 0x00, 0x84, 0x00, 0x40, 0x80, 0x20, 0x10, 0x08, 0x24, 0x02, 0x41, 0x00, 0x86, 0x03, 0x12, 0x03, 0xB4, 0x03, 0x52, 0x81, 0x23, 0x80, 0x70, 0xA0, 0x14, 0x28, 0x05, 0x0A, 0x01, 0x42, 0x80, 0x50,
-/* 0x19 */ 0x07, 0xC0, 0x30, 0x60, 0x80, 0x22, 0x00, 0x28, 0x00, 0x33, 0x18, 0x60, 0x00, 0xDC, 0xE1, 0xB9, 0xC3, 0x7B, 0xC6, 0x63, 0x0A, 0x00, 0x24, 0xF0, 0x44, 0x01, 0x06, 0x0C, 0x03, 0xE0,
-/* 0x1A */ 0xFF, 0xFC, 0x00, 0x63, 0xE3, 0x31, 0x99, 0x04, 0xC8, 0x66, 0x06, 0x30, 0x61, 0x82, 0x0C, 0x10, 0x60, 0x03, 0x04, 0x18, 0x00, 0xFF, 0xFC,
-/* 0x1B */ 0x07, 0xF0, 0x06, 0x0C, 0x04, 0x01, 0x04, 0x00, 0x44, 0x22, 0x12, 0x2A, 0x89, 0x00, 0x04, 0x80, 0x02, 0x44, 0x11, 0x01, 0xF0, 0x04, 0x01, 0x0D, 0x01, 0x6A, 0x41, 0x2C, 0x00, 0x05, 0xC0, 0x0E, 0x18, 0x18,
-/* 0x1C */ 0x07, 0xC0, 0x30, 0x60, 0x80, 0x22, 0xC0, 0x2A, 0x00, 0x33, 0x00, 0x66, 0x00, 0xCC, 0x39, 0x80, 0x83, 0x00, 0x06, 0x00, 0x8C, 0x3E, 0x14, 0x00, 0x44, 0x01, 0x06, 0x0C, 0x03, 0xE0,
-/* 0x1D */ 0x07, 0xC0, 0x30, 0x60, 0x80, 0x22, 0x70, 0x28, 0x00, 0x31, 0x80, 0x63, 0x18, 0xC0, 0x31, 0x80, 0x03, 0x00, 0x06, 0x60, 0x0D, 0x33, 0x12, 0x10, 0x48, 0x21, 0x23, 0x8C, 0x00,
-/* 0x1E */ 0x03, 0x00, 0x07, 0x9E, 0x07, 0x00, 0x86, 0x00, 0x27, 0xC0, 0x0F, 0xC0, 0x07, 0x8C, 0x62, 0x06, 0x31, 0x20, 0x00, 0x90, 0x00, 0x48, 0x00, 0x24, 0x3E, 0x11, 0x00, 0x10, 0x40, 0x10, 0x18, 0x30, 0x03, 0xE0,
-/* 0x1F */ 0x18, 0x02, 0x80, 0x4C, 0x16, 0x41, 0x24, 0x3C, 0x88, 0x6E, 0x65, 0xF2, 0x78, 0x46, 0x88, 0xCF, 0x18, 0x02, 0x80, 0x8C, 0x60, 0x70,
-/* ' ' 0x20 */
-/* '!' 0x21 */ 0xFF, 0xFF, 0xF0, 0xC0,
-/* '"' 0x22 */ 0xDE, 0xF7, 0x20,
-/* '#' 0x23 */ 0x09, 0x86, 0x41, 0x91, 0xFF, 0x13, 0x04, 0xC3, 0x20, 0xC8, 0xFF, 0x89, 0x82, 0x61, 0x90,
-/* '$' 0x24 */ 0x10, 0x1F, 0x14, 0xDA, 0x3D, 0x1E, 0x83, 0x40, 0x78, 0x17, 0x08, 0xF4, 0x7A, 0x35, 0x33, 0xF0, 0x40, 0x20,
-/* '%' 0x25 */ 0x38, 0x10, 0xEC, 0x20, 0xC6, 0x20, 0xC6, 0x40, 0xC6, 0x40, 0x6C, 0x80, 0x39, 0x00, 0x01, 0x3C, 0x02, 0x77, 0x02, 0x63, 0x04, 0x63, 0x04, 0x77, 0x08, 0x3C,
-/* '&' 0x26 */ 0x0E, 0x0C, 0xC3, 0x30, 0xCC, 0x1E, 0x03, 0x03, 0xC1, 0x9B, 0xC2, 0xF0, 0xEC, 0x19, 0x8F, 0x3C, 0x40,
-/* ''' 0x27 */ 0xFE,
-/* '(' 0x28 */ 0x13, 0x26, 0x6C, 0xCC, 0xCC, 0xC4, 0x66, 0x23, 0x10,
-/* ')' 0x29 */ 0x8C, 0x46, 0x63, 0x33, 0x33, 0x32, 0x66, 0x4C, 0x80,
-/* '*' 0x2A */ 0x25, 0x7E, 0xA5, 0x00,
-/* '+' 0x2B */ 0x30, 0xC3, 0x3F, 0x30, 0xC3, 0x0C,
-/* ',' 0x2C */ 0xD6,
-/* '-' 0x2D */ 0xF0,
-/* '.' 0x2E */ 0xC0,
-/* '/' 0x2F */ 0x08, 0x44, 0x21, 0x10, 0x84, 0x42, 0x11, 0x08, 0x00,
-/* '0' 0x30 */ 0x3C, 0x66, 0x42, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0x42, 0x66, 0x3C,
-/* '1' 0x31 */ 0x11, 0x3F, 0x33, 0x33, 0x33, 0x33, 0x30,
-/* '2' 0x32 */ 0x3E, 0x31, 0xB0, 0x78, 0x30, 0x18, 0x1C, 0x1C, 0x1C, 0x18, 0x18, 0x10, 0x08, 0x07, 0xF8,
-/* '3' 0x33 */ 0x3C, 0x66, 0xC3, 0xC3, 0x03, 0x06, 0x1C, 0x07, 0x03, 0xC3, 0xC3, 0x66, 0x3C,
-/* '4' 0x34 */ 0x0C, 0x18, 0x71, 0x62, 0xC9, 0xA3, 0x46, 0xFE, 0x18, 0x30, 0x60, 0xC0,
-/* '5' 0x35 */ 0x7F, 0x20, 0x10, 0x08, 0x08, 0x07, 0xF3, 0x8C, 0x03, 0x01, 0x80, 0xF0, 0x6C, 0x63, 0xE0,
-/* '6' 0x36 */ 0x1E, 0x31, 0x98, 0x78, 0x0C, 0x06, 0xF3, 0x8D, 0x83, 0xC1, 0xE0, 0xD0, 0x6C, 0x63, 0xE0,
-/* '7' 0x37 */ 0xFF, 0x03, 0x02, 0x06, 0x04, 0x0C, 0x08, 0x18, 0x18, 0x18, 0x10, 0x30, 0x30,
-/* '8' 0x38 */ 0x3E, 0x31, 0xB0, 0x78, 0x3C, 0x1B, 0x18, 0xF8, 0xC6, 0xC1, 0xE0, 0xF0, 0x6C, 0x63, 0xE0,
-/* '9' 0x39 */ 0x3C, 0x66, 0xC2, 0xC3, 0xC3, 0xC3, 0x67, 0x3B, 0x03, 0x03, 0xC2, 0x66, 0x3C,
-/* ':' 0x3A */ 0xC0, 0x00, 0x30,
-/* ';' 0x3B */ 0xC0, 0x00, 0x00, 0x64, 0xA0,
-/* '<' 0x3C */ 0x00, 0x81, 0xC7, 0x8E, 0x0C, 0x07, 0x80, 0x70, 0x0E, 0x01, 0x80,
-/* '=' 0x3D */ 0xFF, 0x80, 0x00, 0x1F, 0xF0,
-/* '>' 0x3E */ 0xE0, 0x1C, 0x03, 0x80, 0x30, 0x70, 0xE3, 0x81, 0x00,
-/* '?' 0x3F */ 0x3E, 0x31, 0xB0, 0x78, 0x30, 0x18, 0x18, 0x38, 0x18, 0x18, 0x0C, 0x00, 0x00, 0x01, 0x80,
-/* '@' 0x40 */ 0x03, 0xF0, 0x06, 0x0E, 0x06, 0x01, 0x86, 0x00, 0x66, 0x1D, 0xBB, 0x31, 0xCF, 0x18, 0xC7, 0x98, 0x63, 0xCC, 0x31, 0xE6, 0x11, 0xB3, 0x99, 0xCC, 0xF7, 0x86, 0x00, 0x01, 0x80, 0x00, 0x70, 0x40, 0x0F, 0xE0,
-/* 'A' 0x41 */ 0x06, 0x00, 0xF0, 0x0F, 0x00, 0x90, 0x19, 0x81, 0x98, 0x10, 0x83, 0x0C, 0x3F, 0xC2, 0x04, 0x60, 0x66, 0x06, 0xC0, 0x30,
-/* 'B' 0x42 */ 0xFF, 0x18, 0x33, 0x03, 0x60, 0x6C, 0x0D, 0x83, 0x3F, 0xC6, 0x06, 0xC0, 0x78, 0x0F, 0x01, 0xE0, 0x6F, 0xF8,
-/* 'C' 0x43 */ 0x1F, 0x86, 0x19, 0x81, 0xA0, 0x3C, 0x01, 0x80, 0x30, 0x06, 0x00, 0xC0, 0x68, 0x0D, 0x83, 0x18, 0x61, 0xF0,
-/* 'D' 0x44 */ 0xFF, 0x18, 0x33, 0x03, 0x60, 0x3C, 0x07, 0x80, 0xF0, 0x1E, 0x03, 0xC0, 0x78, 0x0F, 0x03, 0x60, 0xCF, 0xF0,
-/* 'E' 0x45 */ 0xFF, 0xE0, 0x30, 0x18, 0x0C, 0x06, 0x03, 0xFD, 0x80, 0xC0, 0x60, 0x30, 0x18, 0x0F, 0xF8,
-/* 'F' 0x46 */ 0xFF, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xFE, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0,
-/* 'G' 0x47 */ 0x0F, 0x83, 0x0E, 0x60, 0x66, 0x03, 0xC0, 0x0C, 0x00, 0xC1, 0xFC, 0x03, 0xC0, 0x36, 0x03, 0x60, 0x73, 0x0F, 0x0F, 0x10,
-/* 'H' 0x48 */ 0xC0, 0x78, 0x0F, 0x01, 0xE0, 0x3C, 0x07, 0x80, 0xFF, 0xFE, 0x03, 0xC0, 0x78, 0x0F, 0x01, 0xE0, 0x3C, 0x06,
-/* 'I' 0x49 */ 0xFF, 0xFF, 0xFF, 0xC0,
-/* 'J' 0x4A */ 0x06, 0x0C, 0x18, 0x30, 0x60, 0xC1, 0x83, 0x07, 0x8F, 0x1E, 0x27, 0x80,
-/* 'K' 0x4B */ 0xC0, 0xF0, 0x6C, 0x33, 0x18, 0xCC, 0x37, 0x0F, 0xC3, 0x98, 0xC3, 0x30, 0xCC, 0x1B, 0x03, 0xC0, 0xC0,
-/* 'L' 0x4C */ 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xFF,
-/* 'M' 0x4D */ 0xE0, 0x3F, 0x01, 0xFC, 0x1F, 0xE0, 0xFD, 0x05, 0xEC, 0x6F, 0x63, 0x79, 0x13, 0xCD, 0x9E, 0x6C, 0xF1, 0x47, 0x8E, 0x3C, 0x71, 0x80,
-/* 'N' 0x4E */ 0xE0, 0x7C, 0x0F, 0xC1, 0xE8, 0x3D, 0x87, 0x98, 0xF1, 0x1E, 0x33, 0xC3, 0x78, 0x6F, 0x07, 0xE0, 0x7C, 0x0E,
-/* 'O' 0x4F */ 0x0F, 0x81, 0x83, 0x18, 0x0C, 0xC0, 0x6C, 0x01, 0xE0, 0x0F, 0x00, 0x78, 0x03, 0xC0, 0x1B, 0x01, 0x98, 0x0C, 0x60, 0xC0, 0xF8, 0x00,
-/* 'P' 0x50 */ 0xFF, 0x30, 0x6C, 0x0F, 0x03, 0xC0, 0xF0, 0x6F, 0xF3, 0x00, 0xC0, 0x30, 0x0C, 0x03, 0x00, 0xC0, 0x00,
-/* 'Q' 0x51 */ 0x0F, 0x81, 0x83, 0x18, 0x0C, 0xC0, 0x6C, 0x01, 0xE0, 0x0F, 0x00, 0x78, 0x03, 0xC0, 0x1B, 0x01, 0x98, 0x6C, 0x60, 0xC0, 0xFB, 0x00, 0x08,
-/* 'R' 0x52 */ 0xFF, 0x8C, 0x0E, 0xC0, 0x6C, 0x06, 0xC0, 0x6C, 0x0C, 0xFF, 0x8C, 0x0E, 0xC0, 0x6C, 0x06, 0xC0, 0x6C, 0x06, 0xC0, 0x70,
-/* 'S' 0x53 */ 0x3F, 0x18, 0x6C, 0x0F, 0x03, 0xC0, 0x1E, 0x01, 0xF0, 0x0E, 0x00, 0xF0, 0x3C, 0x0D, 0x86, 0x3F, 0x00,
-/* 'T' 0x54 */ 0xFF, 0x86, 0x03, 0x01, 0x80, 0xC0, 0x60, 0x30, 0x18, 0x0C, 0x06, 0x03, 0x01, 0x80, 0xC0,
-/* 'U' 0x55 */ 0xC0, 0x78, 0x0F, 0x01, 0xE0, 0x3C, 0x07, 0x80, 0xF0, 0x1E, 0x03, 0xC0, 0x78, 0x0F, 0x01, 0xB0, 0x61, 0xF0,
-/* 'V' 0x56 */ 0xC0, 0x6C, 0x0D, 0x81, 0x10, 0x63, 0x0C, 0x61, 0x04, 0x60, 0xCC, 0x19, 0x01, 0x60, 0x3C, 0x07, 0x00, 0x60,
-/* 'W' 0x57 */ 0xC1, 0x81, 0x61, 0xC3, 0x61, 0xC3, 0x61, 0x43, 0x62, 0x62, 0x22, 0x66, 0x32, 0x26, 0x36, 0x26, 0x14, 0x34, 0x14, 0x34, 0x1C, 0x1C, 0x18, 0x1C, 0x08, 0x18,
-/* 'X' 0x58 */ 0xC0, 0xD8, 0x66, 0x18, 0xCC, 0x1E, 0x07, 0x00, 0xC0, 0x78, 0x32, 0x0C, 0xC6, 0x1B, 0x07, 0xC0, 0xC0,
-/* 'Y' 0x59 */ 0xC0, 0x36, 0x06, 0x30, 0xC3, 0x0C, 0x19, 0x81, 0xD8, 0x0F, 0x00, 0x60, 0x06, 0x00, 0x60, 0x06, 0x00, 0x60, 0x06, 0x00,
-/* 'Z' 0x5A */ 0xFF, 0xC0, 0x60, 0x30, 0x0C, 0x06, 0x03, 0x01, 0xC0, 0x60, 0x30, 0x18, 0x06, 0x03, 0x00, 0xFF, 0xC0,
-/* '[' 0x5B */ 0xFB, 0x6D, 0xB6, 0xDB, 0x6D, 0xB6, 0xE0,
-/* '\' 0x5C */ 0x84, 0x10, 0x84, 0x10, 0x84, 0x10, 0x84, 0x10, 0x80,
-/* ']' 0x5D */ 0xED, 0xB6, 0xDB, 0x6D, 0xB6, 0xDB, 0xE0,
-/* '^' 0x5E */ 0x30, 0x60, 0xA2, 0x44, 0xD8, 0xA1, 0x80,
-/* '_' 0x5F */ 0xFF, 0xC0,
-/* '`' 0x60 */ 0xC6, 0x30,
-/* 'a' 0x61 */ 0x7E, 0x71, 0xB0, 0xC0, 0x60, 0xF3, 0xDB, 0x0D, 0x86, 0xC7, 0x3D, 0xC0,
-/* 'b' 0x62 */ 0xC0, 0x60, 0x30, 0x1B, 0xCE, 0x36, 0x0F, 0x07, 0x83, 0xC1, 0xE0, 0xF0, 0x7C, 0x6D, 0xE0,
-/* 'c' 0x63 */ 0x3C, 0x66, 0xC3, 0xC0, 0xC0, 0xC0, 0xC0, 0xC3, 0x66, 0x3C,
-/* 'd' 0x64 */ 0x03, 0x03, 0x03, 0x3B, 0x67, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0x67, 0x3B,
-/* 'e' 0x65 */ 0x3C, 0x66, 0xC3, 0xC3, 0xFF, 0xC0, 0xC0, 0xC3, 0x66, 0x3C,
-/* 'f' 0x66 */ 0x36, 0x6F, 0x66, 0x66, 0x66, 0x66, 0x60,
-/* 'g' 0x67 */ 0x3B, 0x67, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0x67, 0x3B, 0x03, 0x03, 0xC6, 0x7C,
-/* 'h' 0x68 */ 0xC0, 0xC0, 0xC0, 0xDE, 0xE3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3,
-/* 'i' 0x69 */ 0xC3, 0xFF, 0xFF, 0xC0,
-/* 'j' 0x6A */ 0x30, 0x03, 0x33, 0x33, 0x33, 0x33, 0x33, 0x33, 0xE0,
-/* 'k' 0x6B */ 0xC0, 0xC0, 0xC0, 0xC2, 0xC4, 0xCC, 0xD8, 0xF8, 0xEC, 0xC4, 0xC6, 0xC3, 0xC3,
-/* 'l' 0x6C */ 0xFF, 0xFF, 0xFF, 0xC0,
-/* 'm' 0x6D */ 0xDE, 0xF7, 0x1C, 0xF0, 0xC7, 0x86, 0x3C, 0x31, 0xE1, 0x8F, 0x0C, 0x78, 0x63, 0xC3, 0x1E, 0x18, 0xC0,
-/* 'n' 0x6E */ 0xDE, 0xE3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3,
-/* 'o' 0x6F */ 0x3C, 0x66, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0x66, 0x3C,
-/* 'p' 0x70 */ 0xDE, 0x71, 0xB0, 0x78, 0x3C, 0x1E, 0x0F, 0x07, 0x83, 0xE3, 0x6F, 0x30, 0x18, 0x0C, 0x00,
-/* 'q' 0x71 */ 0x3B, 0x67, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0x67, 0x3B, 0x03, 0x03, 0x03,
-/* 'r' 0x72 */ 0xDF, 0x31, 0x8C, 0x63, 0x18, 0xC6, 0x00,
-/* 's' 0x73 */ 0x3E, 0xE3, 0xC0, 0xC0, 0xE0, 0x3C, 0x07, 0xC3, 0xE3, 0x7E,
-/* 't' 0x74 */ 0x66, 0xF6, 0x66, 0x66, 0x66, 0x67,
-/* 'u' 0x75 */ 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC7, 0x7B,
-/* 'v' 0x76 */ 0xC1, 0xA0, 0x98, 0xCC, 0x42, 0x21, 0xB0, 0xD0, 0x28, 0x1C, 0x0C, 0x00,
-/* 'w' 0x77 */ 0xC6, 0x1E, 0x38, 0x91, 0xC4, 0xCA, 0x66, 0xD3, 0x16, 0xD0, 0xA6, 0x87, 0x1C, 0x38, 0xC0, 0xC6, 0x00,
-/* 'x' 0x78 */ 0x87, 0x89, 0xB1, 0xC3, 0x07, 0x1E, 0x26, 0xC5, 0x0C,
-/* 'y' 0x79 */ 0xC1, 0x43, 0x63, 0x62, 0x26, 0x36, 0x34, 0x1C, 0x1C, 0x18, 0x18, 0x18, 0x10, 0x60,
-/* 'z' 0x7A */ 0xFE, 0x0C, 0x30, 0xC1, 0x86, 0x18, 0x20, 0xC1, 0xFC,
-/* '{' 0x7B */ 0x36, 0x66, 0x66, 0x6E, 0xCE, 0x66, 0x66, 0x66, 0x30,
-/* '|' 0x7C */ 0xFF, 0xFF, 0xFF, 0xFF, 0xC0,
-/* '}' 0x7D */ 0xC6, 0x66, 0x66, 0x67, 0x37, 0x66, 0x66, 0x66, 0xC0,
-/* '~' 0x7E */ 0x61, 0x24, 0x38,
-/* 0x7F */
-/* 0x80 */ 0x07, 0xC6, 0x13, 0x00, 0xC0, 0x60, 0x3F, 0xE6, 0x03, 0xFC, 0x60, 0x0C, 0x03, 0x00, 0x61, 0x07, 0xC0,
-/* 0x81 */
-/* 0x82 */ 0xDC,
-/* 0x83 */ 0x19, 0x8C, 0xF3, 0x18, 0xC6, 0x31, 0x8C, 0x63, 0x18, 0xC6, 0xE0,
-/* 0x84 */ 0xDA, 0x76,
-/* 0x85 */ 0xCC, 0xC0,
-/* 0x86 */ 0x18, 0x18, 0x18, 0x18, 0xFF, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-/* 0x87 */ 0x18, 0x18, 0x18, 0x18, 0xFF, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xFF, 0x18, 0x18, 0x18, 0x18,
-/* 0x88 */ 0x72, 0xA2,
-/* 0x89 */ 0x70, 0x80, 0x22, 0x20, 0x08, 0x90, 0x02, 0x24, 0x00, 0x72, 0x00, 0x00, 0x80, 0x00, 0x40, 0x00, 0x10, 0x00, 0x09, 0xC7, 0x84, 0x8B, 0x31, 0x22, 0x84, 0x88, 0xB3, 0x21, 0xC7, 0x80,
-/* 0x8A */ 0x1B, 0x03, 0x80, 0x00, 0xFC, 0x61, 0xB0, 0x3C, 0x0F, 0x00, 0x78, 0x07, 0xC0, 0x38, 0x03, 0xC0, 0xF0, 0x36, 0x18, 0xFC,
-/* 0x8B */ 0x69,
-/* 0x8C */ 0x1E, 0xFE, 0x43, 0x81, 0x83, 0x06, 0x06, 0x0C, 0x0C, 0x18, 0x18, 0x30, 0x3F, 0xE0, 0x60, 0xC0, 0xC1, 0x81, 0x81, 0x83, 0x01, 0x8E, 0x01, 0xEF, 0xE0,
-/* 0x8D */
-/* 0x8E */ 0x1B, 0x03, 0x80, 0x03, 0xFF, 0x01, 0x80, 0xC0, 0x30, 0x18, 0x0C, 0x07, 0x01, 0x80, 0xC0, 0x60, 0x18, 0x0C, 0x03, 0xFF,
-/* 0x8F */
-/* 0x90 */
-/* 0x91 */ 0x6B,
-/* 0x92 */ 0xD6,
-/* 0x93 */ 0x4C, 0xA5, 0xB0,
-/* 0x94 */ 0xDA, 0x53, 0x20,
-/* 0x95 */ 0x6F, 0xFF, 0x60,
-/* 0x96 */ 0xFE,
-/* 0x97 */ 0xFF, 0xFF,
-/* 0x98 */ 0x4D, 0xC0,
-/* 0x99 */ 0xFC, 0xE1, 0xCC, 0x38, 0x73, 0x0E, 0x1C, 0xC3, 0x8F, 0x30, 0xD2, 0xCC, 0x34, 0xB3, 0x0D, 0x6C, 0xC3, 0x53, 0x30, 0xCC, 0xCC, 0x33, 0x30,
-/* 0x9A */ 0x24, 0x3C, 0x18, 0x7E, 0xE3, 0xC0, 0xC0, 0x60, 0x3C, 0x07, 0xC3, 0xE3, 0x7E,
-/* 0x9B */ 0x96,
-/* 0x9C */ 0x3C, 0xF8, 0xCF, 0x1B, 0x0C, 0x1E, 0x18, 0x3C, 0x3F, 0xF8, 0x60, 0x30, 0xC0, 0x61, 0x83, 0x67, 0x8C, 0x79, 0xF0,
-/* 0x9D */
-/* 0x9E */ 0x48, 0xF0, 0xC7, 0xF0, 0x61, 0x86, 0x0C, 0x30, 0xC1, 0x06, 0x0F, 0xE0,
-/* 0x9F */ 0x19, 0x80, 0x00, 0xC0, 0x36, 0x06, 0x30, 0xC3, 0x0C, 0x19, 0x81, 0xD8, 0x0F, 0x00, 0x60, 0x06, 0x00, 0x60, 0x06, 0x00, 0x60,
-/* 0xA0 */
-/* 0xA1 */ 0xCF, 0xFF, 0xFF, 0xC0,
-/* 0xA2 */ 0x08, 0x04, 0x0F, 0x8D, 0x6C, 0x9E, 0x43, 0x21, 0x90, 0xC8, 0x64, 0xDA, 0xC7, 0xC0, 0x80, 0x40,
-/* 0xA3 */ 0x1F, 0x0C, 0x66, 0x0D, 0x83, 0x60, 0x0C, 0x0F, 0xC0, 0x60, 0x18, 0x06, 0x03, 0x01, 0xF1, 0x43, 0xC0,
-/* 0xA4 */ 0xFF, 0xDF, 0x1E, 0x3E, 0xFF, 0xC0,
-/* 0xA5 */ 0xC3, 0x42, 0x42, 0x24, 0x24, 0x3C, 0x18, 0x7E, 0x18, 0x7E, 0x18, 0x18, 0x18,
-/* 0xA6 */ 0xFF, 0xFC, 0x0F, 0xFF, 0xC0,
-/* 0xA7 */ 0x0C, 0x09, 0x0C, 0xC6, 0x63, 0x81, 0xE3, 0x19, 0x87, 0xE1, 0xB8, 0xC6, 0x41, 0xC0, 0x73, 0x19, 0x8C, 0x66, 0x1E, 0x00,
-/* 0xA8 */ 0xCC,
-/* 0xA9 */ 0x0F, 0xC0, 0x61, 0x87, 0x03, 0x9B, 0xC6, 0xD9, 0x8F, 0x60, 0x3D, 0x00, 0xF4, 0x03, 0xD8, 0x0D, 0xE6, 0x67, 0xF3, 0x86, 0x18, 0x0F, 0xC0,
-/* 0xAA */ 0x74, 0x8D, 0xA9, 0x7C, 0x1F,
-/* 0xAB */ 0x22, 0xCF, 0x26, 0x46, 0x64, 0x40,
-/* 0xAC */ 0xFF, 0x80, 0xC0, 0x60, 0x30, 0x18,
-/* 0xAD */
-/* 0xAE */ 0x0F, 0xC0, 0x61, 0x87, 0x03, 0x9F, 0xE6, 0xD0, 0x8F, 0x42, 0x3D, 0xF0, 0xF4, 0x23, 0xD0, 0x8D, 0xC2, 0x67, 0x0B, 0x86, 0x18, 0x0F, 0xC0,
-/* 0xAF */ 0xF8,
-/* 0xB0 */ 0x74, 0x63, 0x17, 0x00,
-/* 0xB1 */ 0x0C, 0x06, 0x03, 0x07, 0xE0, 0xC0, 0x60, 0x30, 0x18, 0x00, 0x00, 0x3F, 0xE0,
-/* 0xB2 */ 0x7B, 0x30, 0xC3, 0x11, 0x84, 0x3F,
-/* 0xB3 */ 0x7D, 0x8C, 0x18, 0xC0, 0x60, 0xF1, 0xBE,
-/* 0xB4 */ 0x36, 0xC0,
-/* 0xB5 */ 0xC3, 0x61, 0xB0, 0xD8, 0x6C, 0x36, 0x1B, 0x0D, 0x86, 0xE7, 0x7D, 0xF0, 0x18, 0x0C, 0x00,
-/* 0xB6 */ 0x3F, 0x7E, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0x72, 0x12, 0x12, 0x12, 0x12, 0x12, 0x12, 0x12, 0x12,
-/* 0xB7 */ 0xE0,
-/* 0xB8 */ 0x21, 0xC7, 0xE0,
-/* 0xB9 */ 0x3D, 0xB6, 0xD8,
-/* 0xBA */ 0x74, 0x63, 0x18, 0xB8, 0x1F,
-/* 0xBB */ 0x89, 0x98, 0x99, 0x3C, 0xD1, 0x00,
-/* 0xBC */ 0x20, 0x43, 0x81, 0x06, 0x08, 0x18, 0x20, 0x61, 0x01, 0x84, 0x06, 0x21, 0x80, 0x86, 0x04, 0x78, 0x32, 0x60, 0x87, 0xC4, 0x06, 0x10, 0x18,
-/* 0xBD */ 0x20, 0x43, 0x81, 0x06, 0x08, 0x18, 0x20, 0x61, 0x01, 0x8D, 0xE6, 0x2C, 0xC1, 0x03, 0x0C, 0x0C, 0x20, 0x41, 0x86, 0x0C, 0x30, 0x20, 0xFC,
-/* 0xBE */ 0x78, 0x11, 0x98, 0x40, 0x31, 0x00, 0x82, 0x00, 0xC8, 0x01, 0x90, 0x33, 0x43, 0x3D, 0x06, 0x02, 0x3C, 0x08, 0x98, 0x10, 0xF8, 0x40, 0x61, 0x00, 0xC0,
-/* 0xBF */ 0x0C, 0x00, 0x00, 0x01, 0x80, 0xC0, 0xC0, 0xE0, 0xC0, 0xC0, 0x60, 0xF0, 0x6C, 0x63, 0xE0,
-/* 0xC0 */ 0x0C, 0xDB, 0xD3, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-/* 0xC1 */ 0x0E, 0x01, 0xC0, 0x6C, 0x0D, 0x81, 0xB0, 0x63, 0x0C, 0x61, 0xFC, 0x7F, 0xCC, 0x19, 0x83, 0x60, 0x3C, 0x06,
-/* 0xC2 */ 0xFF, 0x3F, 0xEC, 0x0F, 0x03, 0xC0, 0xFF, 0xEF, 0xFB, 0x03, 0xC0, 0xF0, 0x3C, 0x1F, 0xFE, 0xFF, 0x00,
-/* 0xC3 */ 0xFF, 0xFF, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0,
-/* 0xC4 */ 0x07, 0x00, 0x38, 0x01, 0xC0, 0x1B, 0x00, 0xD8, 0x0C, 0x60, 0x63, 0x03, 0x18, 0x30, 0x61, 0x83, 0x18, 0x0C, 0xFF, 0xE7, 0xFF, 0x00,
-/* 0xC5 */ 0xFF, 0xFF, 0xFC, 0x03, 0x00, 0xC0, 0x3F, 0xEF, 0xFB, 0x00, 0xC0, 0x30, 0x0C, 0x03, 0xFF, 0xFF, 0xC0,
-/* 0xC6 */ 0x7F, 0xDF, 0xF0, 0x18, 0x0C, 0x07, 0x01, 0x80, 0xC0, 0x60, 0x38, 0x0C, 0x06, 0x03, 0xFF, 0xFF, 0xC0,
-/* 0xC7 */ 0xC0, 0x78, 0x0F, 0x01, 0xE0, 0x3C, 0x07, 0xFF, 0xFF, 0xFE, 0x03, 0xC0, 0x78, 0x0F, 0x01, 0xE0, 0x3C, 0x06,
-/* 0xC8 */ 0x0F, 0x03, 0xFC, 0x70, 0xE6, 0x06, 0xC0, 0x3C, 0xF3, 0xCF, 0x3C, 0x03, 0xC0, 0x36, 0x06, 0x70, 0xE3, 0xFC, 0x1F, 0x80,
-/* 0xC9 */ 0xFF, 0xFF, 0xFF, 0xC0,
-/* 0xCA */ 0xC1, 0xD8, 0x73, 0x1C, 0x67, 0x0D, 0xC1, 0xF0, 0x3F, 0x07, 0x70, 0xC7, 0x18, 0x63, 0x0E, 0x60, 0xEC, 0x0E,
-/* 0xCB */ 0x07, 0x00, 0x38, 0x01, 0xC0, 0x1B, 0x00, 0xD8, 0x0C, 0x60, 0x63, 0x03, 0x18, 0x30, 0x61, 0x83, 0x1C, 0x1C, 0xC0, 0x66, 0x03, 0x00,
-/* 0xCC */ 0xE0, 0x3F, 0x83, 0xFC, 0x1F, 0xE0, 0xFD, 0x8D, 0xEC, 0x6F, 0x63, 0x79, 0x13, 0xCD, 0x9E, 0x6C, 0xF3, 0x67, 0x8E, 0x3C, 0x71, 0x80,
-/* 0xCD */ 0xC0, 0x7C, 0x0F, 0xC1, 0xF8, 0x3D, 0x87, 0x98, 0xF3, 0x9E, 0x33, 0xC3, 0x78, 0x3F, 0x07, 0xE0, 0x7C, 0x06,
-/* 0xCE */ 0xFF, 0xFF, 0xF0, 0x00, 0x00, 0x00, 0x1F, 0xE7, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x03, 0xFF, 0xFF, 0xC0,
-/* 0xCF */ 0x0F, 0x83, 0xFC, 0x70, 0xE6, 0x06, 0xC0, 0x3C, 0x03, 0xC0, 0x3C, 0x03, 0xC0, 0x36, 0x06, 0x70, 0xE3, 0xFC, 0x0F, 0x00,
-/* 0xD0 */ 0xFF, 0xFF, 0xFF, 0x01, 0xE0, 0x3C, 0x07, 0x80, 0xF0, 0x1E, 0x03, 0xC0, 0x78, 0x0F, 0x01, 0xE0, 0x3C, 0x06,
-/* 0xD1 */ 0xFF, 0x3F, 0xEC, 0x1F, 0x03, 0xC0, 0xF0, 0x7F, 0xFB, 0xFC, 0xC0, 0x30, 0x0C, 0x03, 0x00, 0xC0, 0x00,
-/* 0xD2 */
-/* 0xD3 */ 0xFF, 0xFF, 0xC0, 0x60, 0x30, 0x18, 0x0C, 0x18, 0x30, 0x60, 0xC0, 0xFF, 0xFF,
-/* 0xD4 */ 0xFF, 0xFF, 0xF0, 0xC0, 0x30, 0x0C, 0x03, 0x00, 0xC0, 0x30, 0x0C, 0x03, 0x00, 0xC0, 0x30, 0x0C, 0x00,
-/* 0xD5 */ 0xE0, 0x76, 0x06, 0x30, 0xC3, 0x9C, 0x19, 0x80, 0xF0, 0x0F, 0x00, 0x60, 0x06, 0x00, 0x60, 0x06, 0x00, 0x60, 0x06, 0x00,
-/* 0xD6 */ 0x06, 0x00, 0x60, 0x1F, 0x87, 0xFE, 0xE6, 0x7C, 0x63, 0xC6, 0x3C, 0x63, 0xE6, 0x77, 0xFE, 0x1F, 0x80, 0x60, 0x06, 0x00,
-/* 0xD7 */ 0x71, 0xC6, 0x30, 0x6C, 0x0D, 0x80, 0xE0, 0x1C, 0x03, 0x80, 0xD8, 0x1B, 0x07, 0x70, 0xC6, 0x30, 0x6E, 0x0E,
-/* 0xD8 */ 0xC6, 0x3C, 0x63, 0xC6, 0x3C, 0x63, 0xC6, 0x3C, 0x63, 0x46, 0x66, 0x66, 0x3F, 0xC0, 0x60, 0x06, 0x00, 0x60, 0x06, 0x00,
-/* 0xD9 */ 0x1F, 0x07, 0xF1, 0xC7, 0x70, 0x7C, 0x07, 0x80, 0xF0, 0x1E, 0x03, 0x40, 0x4C, 0x18, 0xEE, 0x7D, 0xFF, 0xBE,
-/* 0xDA */ 0xCF, 0x30, 0x0C, 0x30, 0xC3, 0x0C, 0x30, 0xC3, 0x0C, 0x30, 0xC3, 0x0C,
-/* 0xDB */ 0x19, 0x81, 0x98, 0x00, 0x0E, 0x07, 0x60, 0x63, 0x0C, 0x39, 0xC1, 0x98, 0x0F, 0x00, 0xF0, 0x06, 0x00, 0x60, 0x06, 0x00, 0x60, 0x06, 0x00, 0x60,
-/* 0xDC */ 0x06, 0x0C, 0x00, 0x3B, 0x7B, 0xEE, 0xC6, 0xC6, 0xC6, 0xC6, 0xEE, 0x7B, 0x3B,
-/* 0xDD */ 0x18, 0x20, 0x03, 0xCF, 0xF8, 0xB0, 0x38, 0x71, 0x83, 0x17, 0xF7, 0x80,
-/* 0xDE */ 0x0C, 0x18, 0x00, 0xDE, 0xFF, 0xE3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0x03, 0x03, 0x03, 0x03,
-/* 0xDF */ 0x78, 0x6D, 0xB6, 0xDB, 0x6C,
-/* 0xE0 */ 0x0C, 0xDB, 0xD3, 0x00, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xE7, 0x7E, 0x3C,
-/* 0xE1 */ 0x3B, 0x7B, 0xEE, 0xC6, 0xC6, 0xC6, 0xC6, 0xEE, 0x7B, 0x3B,
-/* 0xE2 */ 0x3C, 0x7E, 0xC6, 0xC6, 0xC4, 0xD8, 0xDE, 0xC7, 0xC3, 0xC3, 0xE7, 0xFE, 0xDC, 0xC0, 0xC0, 0xC0, 0xC0,
-/* 0xE3 */ 0x61, 0x98, 0x66, 0x18, 0xCC, 0x33, 0x0C, 0xC1, 0xE0, 0x78, 0x1E, 0x03, 0x00, 0xC0, 0x30, 0x0C, 0x03, 0x00,
-/* 0xE4 */ 0x7E, 0x7E, 0x30, 0x3C, 0x7E, 0xE7, 0xC3, 0xC3, 0xC3, 0xC3, 0xE7, 0x7E, 0x3C,
-/* 0xE5 */ 0x79, 0xFF, 0x16, 0x07, 0x0E, 0x30, 0x62, 0xFE, 0xF0,
-/* 0xE6 */ 0x7E, 0xFC, 0x30, 0xC3, 0x0C, 0x18, 0x60, 0xC1, 0x83, 0x07, 0xE7, 0xE0, 0xC1, 0x83, 0x0C,
-/* 0xE7 */ 0xDE, 0xFF, 0xE3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0x03, 0x03, 0x03, 0x03,
-/* 0xE8 */ 0x3C, 0x7E, 0x66, 0xC3, 0xC3, 0xFF, 0xFF, 0xC3, 0xC3, 0xC3, 0x66, 0x7E, 0x3C,
-/* 0xE9 */ 0xFF, 0xFF, 0xF0,
-/* 0xEA */ 0xC3, 0x63, 0x33, 0x1B, 0x0F, 0x06, 0xC3, 0x31, 0x8C, 0xC6, 0x61, 0x80,
-/* 0xEB */ 0x30, 0x0C, 0x06, 0x03, 0x01, 0xC1, 0xE0, 0xD0, 0x6C, 0x36, 0x33, 0x18, 0xCC, 0x66, 0x30,
-/* 0xEC */ 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xE7, 0xFF, 0xDB, 0xC0, 0xC0, 0xC0, 0xC0,
-/* 0xED */ 0xC1, 0xE0, 0xD8, 0xCC, 0x66, 0x31, 0xB0, 0xD8, 0x38, 0x1C, 0x04, 0x00,
-/* 0xEE */ 0x7D, 0xFB, 0x06, 0x07, 0xC7, 0x9C, 0x70, 0xC1, 0x83, 0x83, 0xE3, 0xE0, 0xC1, 0x8E, 0x18,
-/* 0xEF */ 0x3C, 0x7E, 0xE7, 0xC3, 0xC3, 0xC3, 0xC3, 0xE7, 0x7E, 0x3C,
-/* 0xF0 */ 0xFF, 0xFF, 0xFF, 0x30, 0xC3, 0x0C, 0x30, 0xC3, 0x0C, 0x30, 0xC3, 0x0C, 0x30, 0xC3, 0x0C,
-/* 0xF1 */ 0x3C, 0x7E, 0xE7, 0xC3, 0xC3, 0xC3, 0xC3, 0xE7, 0xFE, 0xDC, 0xC0, 0xC0, 0xC0, 0xC0,
-/* 0xF2 */ 0x1E, 0xFD, 0x86, 0x0C, 0x18, 0x30, 0x70, 0x7C, 0x7C, 0x18, 0x33, 0xE7, 0x00,
-/* 0xF3 */ 0x3F, 0xDF, 0xFE, 0x63, 0x0C, 0xC3, 0x30, 0xCC, 0x33, 0x9C, 0x7E, 0x0F, 0x00,
-/* 0xF4 */ 0xFF, 0xF3, 0x0C, 0x30, 0xC3, 0x0C, 0x30, 0xC0,
-/* 0xF5 */ 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xE7, 0x7E, 0x3C,
-/* 0xF6 */ 0x2F, 0x1B, 0xEC, 0xDF, 0x33, 0xCC, 0xF3, 0x3C, 0xCD, 0xB6, 0x7F, 0x8F, 0x80, 0xC0, 0x30, 0x0C, 0x03, 0x00,
-/* 0xF7 */ 0x63, 0x31, 0x8D, 0x86, 0xC3, 0x60, 0xE0, 0x70, 0x38, 0x1C, 0x1B, 0x0D, 0x86, 0xC6, 0x33, 0x18,
-/* 0xF8 */ 0xCC, 0xF3, 0x3C, 0xCF, 0x33, 0xCC, 0xF3, 0x3C, 0xCF, 0x33, 0x6D, 0x8F, 0xC0, 0xC0, 0x30, 0x0C, 0x03, 0x00,
-/* 0xF9 */ 0x30, 0xC6, 0x06, 0x66, 0x6C, 0x63, 0xC6, 0x3C, 0x63, 0xC6, 0x3E, 0xF7, 0x79, 0xE3, 0x9C,
-/* 0xFA */ 0xCF, 0x30, 0x0C, 0x30, 0xC3, 0x0C, 0x30, 0xC3, 0x0C, 0x30,
-/* 0xFB */ 0x66, 0x66, 0x00, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xE7, 0x7E, 0x3C,
-/* 0xFC */ 0x0C, 0x18, 0x00, 0x3C, 0x7E, 0xE7, 0xC3, 0xC3, 0xC3, 0xC3, 0xE7, 0x7E, 0x3C,
-/* 0xFD */ 0x08, 0x10, 0x00, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xE7, 0x7E, 0x3C,
-/* 0xFE */ 0x03, 0x00, 0x60, 0x00, 0x03, 0x0C, 0x60, 0x66, 0x66, 0xC6, 0x3C, 0x63, 0xC6, 0x3C, 0x63, 0xEF, 0x77, 0x9E, 0x39, 0xC0,
-/* 0xFF */
-};
-
-const GFXglyph FreeSans9pt_Win1253Glyphs[] PROGMEM = {
-/* 0x01 */ {     0,   15,   15,   17,    1,  -13 },
-/* 0x02 */ {    29,   15,   15,   17,    1,  -13 },
-/* 0x03 */ {    58,   15,   16,   17,    1,  -14 },
-/* 0x04 */ {    88,   15,   16,   17,    1,  -14 },
-/* 0x05 */ {   118,   16,   15,   18,    1,  -13 },
-/* 0x06 */ {   148,   15,   15,   17,    1,  -13 },
-/* 0x07 */ {   177,    0,    0,    8,    0,    0 },
-/* 0x08 */ {   177,   17,   16,   19,    1,  -14 },
-/* 0x09 */ {   211,   17,   12,   19,    1,  -12 },
-/* 0x0A */ {   237,    0,    0,    8,    0,    0 },
-/* 0x0B */ {   237,   17,   16,   19,    1,  -14 },
-/* 0x0C */ {   271,   15,   14,   17,    1,  -12 },
-/* 0x0D */ {   298,    0,    0,    8,    0,    0 },
-/* 0x0E */ {   298,   15,   16,   17,    1,  -14 },
-/* 0x0F */ {   328,   15,   15,   17,    1,  -13 },
-/* 0x10 */ {   357,   15,   15,   17,    1,  -13 },
-/* 0x11 */ {   386,   15,   16,   17,    1,  -14 },
-/* 0x12 */ {   416,   17,   17,   19,    1,  -15 },
-/* 0x13 */ {   453,   15,   16,   17,    1,  -14 },
-/* 0x14 */ {   483,   15,   16,   17,    1,  -14 },
-/* 0x15 */ {   513,   15,   16,   17,    1,  -14 },
-/* 0x16 */ {   543,   11,   16,   13,    1,  -14 },
-/* 0x17 */ {   565,   15,   16,   17,    1,  -14 },
-/* 0x18 */ {   595,   18,   15,   20,    1,  -13 },
-/* 0x19 */ {   629,   15,   16,   17,    1,  -14 },
-/* 0x1A */ {   659,   13,   14,   15,    1,  -12 },
-/* 0x1B */ {   682,   17,   16,   19,    1,  -14 },
-/* 0x1C */ {   716,   15,   16,   17,    1,  -14 },
-/* 0x1D */ {   746,   15,   15,   17,    1,  -13 },
-/* 0x1E */ {   775,   17,   16,   19,    1,  -14 },
-/* 0x1F */ {   809,   11,   16,   13,    1,  -14 },
-/* ' ' 0x20 */ {   831,    0,    0,    5,    0,    0 },
-/* '!' 0x21 */ {   831,    2,   13,    6,    2,  -12 },
-/* '"' 0x22 */ {   835,    5,    4,    6,    1,  -12 },
-/* '#' 0x23 */ {   838,   10,   12,   10,    0,  -11 },
-/* '$' 0x24 */ {   853,    9,   16,   10,    1,  -13 },
-/* '%' 0x25 */ {   871,   16,   13,   16,    1,  -12 },
-/* '&' 0x26 */ {   897,   10,   13,   12,    1,  -12 },
-/* ''' 0x27 */ {   914,    2,    4,    4,    1,  -12 },
-/* '(' 0x28 */ {   915,    4,   17,    6,    1,  -12 },
-/* ')' 0x29 */ {   924,    4,   17,    6,    1,  -12 },
-/* '*' 0x2A */ {   933,    5,    5,    7,    1,  -12 },
-/* '+' 0x2B */ {   937,    6,    8,   11,    3,   -7 },
-/* ',' 0x2C */ {   943,    2,    4,    5,    2,    0 },
-/* '-' 0x2D */ {   944,    4,    1,    6,    1,   -4 },
-/* '.' 0x2E */ {   945,    2,    1,    5,    1,    0 },
-/* '/' 0x2F */ {   946,    5,   13,    5,    0,  -12 },
-/* '0' 0x30 */ {   955,    8,   13,   10,    1,  -12 },
-/* '1' 0x31 */ {   968,    4,   13,   10,    3,  -12 },
-/* '2' 0x32 */ {   975,    9,   13,   10,    1,  -12 },
-/* '3' 0x33 */ {   990,    8,   13,   10,    1,  -12 },
-/* '4' 0x34 */ {  1003,    7,   13,   10,    2,  -12 },
-/* '5' 0x35 */ {  1015,    9,   13,   10,    1,  -12 },
-/* '6' 0x36 */ {  1030,    9,   13,   10,    1,  -12 },
-/* '7' 0x37 */ {  1045,    8,   13,   10,    0,  -12 },
-/* '8' 0x38 */ {  1058,    9,   13,   10,    1,  -12 },
-/* '9' 0x39 */ {  1073,    8,   13,   10,    1,  -12 },
-/* ':' 0x3A */ {  1086,    2,   10,    5,    1,   -9 },
-/* ';' 0x3B */ {  1089,    3,   12,    5,    1,   -8 },
-/* '<' 0x3C */ {  1094,    9,    9,   11,    1,   -8 },
-/* '=' 0x3D */ {  1105,    9,    4,   11,    1,   -5 },
-/* '>' 0x3E */ {  1110,    9,    8,   11,    1,   -7 },
-/* '?' 0x3F */ {  1119,    9,   13,   10,    1,  -12 },
-/* '@' 0x40 */ {  1134,   17,   16,   18,    1,  -12 },
-/* 'A' 0x41 */ {  1168,   12,   13,   12,    0,  -12 },
-/* 'B' 0x42 */ {  1188,   11,   13,   12,    1,  -12 },
-/* 'C' 0x43 */ {  1206,   11,   13,   13,    1,  -12 },
-/* 'D' 0x44 */ {  1224,   11,   13,   13,    1,  -12 },
-/* 'E' 0x45 */ {  1242,    9,   13,   11,    1,  -12 },
-/* 'F' 0x46 */ {  1257,    8,   13,   11,    1,  -12 },
-/* 'G' 0x47 */ {  1270,   12,   13,   14,    1,  -12 },
-/* 'H' 0x48 */ {  1290,   11,   13,   13,    1,  -12 },
-/* 'I' 0x49 */ {  1308,    2,   13,    5,    2,  -12 },
-/* 'J' 0x4A */ {  1312,    7,   13,   10,    1,  -12 },
-/* 'K' 0x4B */ {  1324,   10,   13,   12,    1,  -12 },
-/* 'L' 0x4C */ {  1341,    8,   13,   10,    1,  -12 },
-/* 'M' 0x4D */ {  1354,   13,   13,   15,    1,  -12 },
-/* 'N' 0x4E */ {  1376,   11,   13,   13,    1,  -12 },
-/* 'O' 0x4F */ {  1394,   13,   13,   14,    1,  -12 },
-/* 'P' 0x50 */ {  1416,   10,   13,   12,    1,  -12 },
-/* 'Q' 0x51 */ {  1433,   13,   14,   14,    1,  -12 },
-/* 'R' 0x52 */ {  1456,   12,   13,   13,    1,  -12 },
-/* 'S' 0x53 */ {  1476,   10,   13,   12,    1,  -12 },
-/* 'T' 0x54 */ {  1493,    9,   13,   11,    1,  -12 },
-/* 'U' 0x55 */ {  1508,   11,   13,   13,    1,  -12 },
-/* 'V' 0x56 */ {  1526,   11,   13,   11,    0,  -12 },
-/* 'W' 0x57 */ {  1544,   16,   13,   17,    0,  -12 },
-/* 'X' 0x58 */ {  1570,   10,   13,   12,    1,  -12 },
-/* 'Y' 0x59 */ {  1587,   12,   13,   12,    0,  -12 },
-/* 'Z' 0x5A */ {  1607,   10,   13,   11,    1,  -12 },
-/* '[' 0x5B */ {  1624,    3,   17,    5,    1,  -12 },
-/* '\' 0x5C */ {  1631,    5,   13,    5,    0,  -12 },
-/* ']' 0x5D */ {  1640,    3,   17,    5,    0,  -12 },
-/* '^' 0x5E */ {  1647,    7,    7,    8,    1,  -12 },
-/* '_' 0x5F */ {  1654,   10,    1,   10,    0,    3 },
-/* '`' 0x60 */ {  1656,    4,    3,    5,    0,  -12 },
-/* 'a' 0x61 */ {  1658,    9,   10,   10,    1,   -9 },
-/* 'b' 0x62 */ {  1670,    9,   13,   10,    1,  -12 },
-/* 'c' 0x63 */ {  1685,    8,   10,    9,    1,   -9 },
-/* 'd' 0x64 */ {  1695,    8,   13,   10,    1,  -12 },
-/* 'e' 0x65 */ {  1708,    8,   10,   10,    1,   -9 },
-/* 'f' 0x66 */ {  1718,    4,   13,    5,    1,  -12 },
-/* 'g' 0x67 */ {  1725,    8,   14,   10,    1,   -9 },
-/* 'h' 0x68 */ {  1739,    8,   13,   10,    1,  -12 },
-/* 'i' 0x69 */ {  1752,    2,   13,    4,    1,  -12 },
-/* 'j' 0x6A */ {  1756,    4,   17,    4,    0,  -12 },
-/* 'k' 0x6B */ {  1765,    8,   13,    9,    1,  -12 },
-/* 'l' 0x6C */ {  1778,    2,   13,    4,    1,  -12 },
-/* 'm' 0x6D */ {  1782,   13,   10,   15,    1,   -9 },
-/* 'n' 0x6E */ {  1799,    8,   10,   10,    1,   -9 },
-/* 'o' 0x6F */ {  1809,    8,   10,   10,    1,   -9 },
-/* 'p' 0x70 */ {  1819,    9,   13,   10,    1,   -9 },
-/* 'q' 0x71 */ {  1834,    8,   13,   10,    1,   -9 },
-/* 'r' 0x72 */ {  1847,    5,   10,    6,    1,   -9 },
-/* 's' 0x73 */ {  1854,    8,   10,    9,    1,   -9 },
-/* 't' 0x74 */ {  1864,    4,   12,    5,    1,  -11 },
-/* 'u' 0x75 */ {  1870,    8,   10,   10,    1,   -9 },
-/* 'v' 0x76 */ {  1880,    9,   10,    9,    0,   -9 },
-/* 'w' 0x77 */ {  1892,   13,   10,   13,    0,   -9 },
-/* 'x' 0x78 */ {  1909,    7,   10,    9,    1,   -9 },
-/* 'y' 0x79 */ {  1918,    8,   14,    9,    0,   -9 },
-/* 'z' 0x7A */ {  1932,    7,   10,    9,    1,   -9 },
-/* '{' 0x7B */ {  1941,    4,   17,    6,    1,  -12 },
-/* '|' 0x7C */ {  1950,    2,   17,    4,    2,  -12 },
-/* '}' 0x7D */ {  1955,    4,   17,    6,    1,  -12 },
-/* '~' 0x7E */ {  1964,    7,    3,    9,    1,   -7 },
-/* 0x7F */ {  1967,    0,    0,    0,    0,    0 },
-/* 0x80 */ {  1967,   10,   13,   12,    1,  -12 },
-/* 0x81 */ {  1984,    0,    0,    8,    0,    0 },
-/* 0x82 */ {  1984,    2,    3,    5,    1,    0 },
-/* 0x83 */ {  1985,    5,   17,    5,    0,  -12 },
-/* 0x84 */ {  1996,    5,    3,    7,    1,    0 },
-/* 0x85 */ {  1998,   10,    1,   12,    1,    0 },
-/* 0x86 */ {  2000,    8,   16,   10,    1,  -12 },
-/* 0x87 */ {  2016,    8,   16,   10,    1,  -12 },
-/* 0x88 */ {  2032,    5,    3,    6,    0,  -12 },
-/* 0x89 */ {  2034,   18,   13,   18,    0,  -12 },
-/* 0x8A */ {  2064,   10,   16,   12,    1,  -15 },
-/* 0x8B */ {  2084,    2,    4,    4,    1,   -6 },
-/* 0x8C */ {  2085,   15,   13,   18,    1,  -12 },
-/* 0x8D */ {  2110,    0,    0,    8,    0,    0 },
-/* 0x8E */ {  2110,   10,   16,   11,    1,  -15 },
-/* 0x8F */ {  2130,    0,    0,    8,    0,    0 },
-/* 0x90 */ {  2130,    0,    0,    8,    0,    0 },
-/* 0x91 */ {  2130,    2,    4,    4,    2,  -12 },
-/* 0x92 */ {  2131,    2,    4,    4,    1,  -12 },
-/* 0x93 */ {  2132,    5,    4,    7,    2,  -12 },
-/* 0x94 */ {  2135,    5,    4,    7,    1,  -12 },
-/* 0x95 */ {  2138,    4,    5,    7,    1,   -8 },
-/* 0x96 */ {  2141,    7,    1,    9,    1,   -4 },
-/* 0x97 */ {  2142,   16,    1,   18,    1,   -4 },
-/* 0x98 */ {  2144,    5,    2,    6,    0,  -12 },
-/* 0x99 */ {  2146,   18,   10,   18,    1,  -13 },
-/* 0x9A */ {  2169,    8,   13,    9,    1,  -12 },
-/* 0x9B */ {  2182,    2,    4,    5,    2,   -6 },
-/* 0x9C */ {  2183,   15,   10,   17,    1,   -9 },
-/* 0x9D */ {  2202,    0,    0,    8,    0,    0 },
-/* 0x9E */ {  2202,    7,   13,    9,    1,  -12 },
-/* 0x9F */ {  2214,   12,   14,   12,    0,  -13 },
-/* 0xA0 */ {  2235,    0,    0,    5,    0,    0 },
-/* 0xA1 */ {  2235,    2,   13,    6,    2,   -8 },
-/* 0xA2 */ {  2239,    9,   14,   10,    1,  -11 },
-/* 0xA3 */ {  2255,   10,   13,   10,    0,  -12 },
-/* 0xA4 */ {  2272,    7,    6,   10,    2,   -8 },
-/* 0xA5 */ {  2278,    8,   13,   10,    1,  -12 },
-/* 0xA6 */ {  2291,    2,   17,    5,    2,  -12 },
-/* 0xA7 */ {  2296,    9,   17,   10,    1,  -12 },
-/* 0xA8 */ {  2316,    6,    1,    6,    0,  -11 },
-/* 0xA9 */ {  2317,   14,   13,   14,    1,  -12 },
-/* 0xAA */ {  2340,    5,    8,    7,    1,  -12 },
-/* 0xAB */ {  2345,    7,    6,    9,    1,   -7 },
-/* 0xAC */ {  2351,    9,    5,   11,    2,   -5 },
-/* 0xAD */ {  2357,    0,    0,    0,    0,    0 },
-/* 0xAE */ {  2357,   14,   13,   14,    1,  -12 },
-/* 0xAF */ {  2380,    5,    1,    6,    0,  -12 },
-/* 0xB0 */ {  2381,    5,    5,   11,    3,  -11 },
-/* 0xB1 */ {  2385,    9,   11,   11,    1,  -10 },
-/* 0xB2 */ {  2398,    6,    8,    6,    1,  -13 },
-/* 0xB3 */ {  2404,    7,    8,    6,    0,  -13 },
-/* 0xB4 */ {  2411,    4,    3,    6,    2,  -12 },
-/* 0xB5 */ {  2413,    9,   13,   10,    1,   -9 },
-/* 0xB6 */ {  2428,    8,   16,   10,    2,  -12 },
-/* 0xB7 */ {  2444,    3,    1,    5,    1,   -4 },
-/* 0xB8 */ {  2445,    5,    4,    6,    1,    1 },
-/* 0xB9 */ {  2448,    3,    7,    6,    2,  -13 },
-/* 0xBA */ {  2451,    5,    8,    7,    1,  -12 },
-/* 0xBB */ {  2456,    7,    6,    9,    1,   -7 },
-/* 0xBC */ {  2462,   14,   13,   16,    2,  -12 },
-/* 0xBD */ {  2485,   14,   13,   16,    2,  -12 },
-/* 0xBE */ {  2508,   15,   13,   16,    1,  -12 },
-/* 0xBF */ {  2533,    9,   13,   10,    1,   -8 },
-/* 0xC0 */ {  2548,    8,   15,    4,   -2,  -15 },
-/* 0xC1 */ {  2563,   11,   13,   11,    0,  -13 },
-/* 0xC2 */ {  2581,   10,   13,   12,    1,  -13 },
-/* 0xC3 */ {  2598,    8,   13,   10,    2,  -13 },
-/* 0xC4 */ {  2611,   13,   13,   12,   -1,  -13 },
-/* 0xC5 */ {  2633,   10,   13,   12,    1,  -13 },
-/* 0xC6 */ {  2650,   10,   13,   11,    0,  -13 },
-/* 0xC7 */ {  2667,   11,   13,   13,    1,  -13 },
-/* 0xC8 */ {  2685,   12,   13,   14,    1,  -13 },
-/* 0xC9 */ {  2705,    2,   13,    4,    1,  -13 },
-/* 0xCA */ {  2709,   11,   13,   12,    1,  -13 },
-/* 0xCB */ {  2727,   13,   13,   12,   -1,  -13 },
-/* 0xCC */ {  2749,   13,   13,   15,    1,  -13 },
-/* 0xCD */ {  2771,   11,   13,   13,    1,  -13 },
-/* 0xCE */ {  2789,   10,   13,   12,    1,  -13 },
-/* 0xCF */ {  2806,   12,   13,   14,    1,  -13 },
-/* 0xD0 */ {  2826,   11,   13,   13,    1,  -13 },
-/* 0xD1 */ {  2844,   10,   13,   12,    1,  -13 },
-/* 0xD2 */ {  2861,    0,    0,    5,    0,    0 },
-/* 0xD3 */ {  2861,    8,   13,   11,    2,  -13 },
-/* 0xD4 */ {  2874,   10,   13,   12,    1,  -13 },
-/* 0xD5 */ {  2891,   12,   13,   12,    0,  -13 },
-/* 0xD6 */ {  2911,   12,   13,   14,    1,  -13 },
-/* 0xD7 */ {  2931,   11,   13,   11,    0,  -13 },
-/* 0xD8 */ {  2949,   12,   13,   14,    1,  -13 },
-/* 0xD9 */ {  2969,   11,   13,   13,    1,  -13 },
-/* 0xDA */ {  2987,    6,   16,    4,   -1,  -16 },
-/* 0xDB */ {  2999,   12,   16,   12,    0,  -16 },
-/* 0xDC */ {  3023,    8,   13,   10,    1,  -13 },
-/* 0xDD */ {  3036,    7,   13,    8,    1,  -13 },
-/* 0xDE */ {  3048,    8,   17,   10,    1,  -13 },
-/* 0xDF */ {  3065,    3,   13,    4,    1,  -13 },
-/* 0xE0 */ {  3070,    8,   14,   10,    1,  -14 },
-/* 0xE1 */ {  3084,    8,   10,   10,    1,  -10 },
-/* 0xE2 */ {  3094,    8,   17,   10,    1,  -13 },
-/* 0xE3 */ {  3111,   10,   14,    8,   -1,  -10 },
-/* 0xE4 */ {  3129,    8,   13,   10,    1,  -13 },
-/* 0xE5 */ {  3142,    7,   10,    8,    1,  -10 },
-/* 0xE6 */ {  3151,    7,   17,    8,    1,  -13 },
-/* 0xE7 */ {  3166,    8,   14,   10,    1,  -10 },
-/* 0xE8 */ {  3180,    8,   13,   10,    1,  -13 },
-/* 0xE9 */ {  3193,    2,   10,    4,    1,  -10 },
-/* 0xEA */ {  3196,    9,   10,    9,    1,  -10 },
-/* 0xEB */ {  3208,    9,   13,    9,    0,  -13 },
-/* 0xEC */ {  3223,    8,   14,   10,    1,  -10 },
-/* 0xED */ {  3237,    9,   10,    9,    0,  -10 },
-/* 0xEE */ {  3249,    7,   17,    8,    1,  -13 },
-/* 0xEF */ {  3264,    8,   10,   10,    1,  -10 },
-/* 0xF0 */ {  3274,   12,   10,   12,    0,  -10 },
-/* 0xF1 */ {  3289,    8,   14,   10,    1,  -10 },
-/* 0xF2 */ {  3303,    7,   14,    9,    1,  -10 },
-/* 0xF3 */ {  3316,   10,   10,   11,    1,  -10 },
-/* 0xF4 */ {  3329,    6,   10,    8,    1,  -10 },
-/* 0xF5 */ {  3337,    8,   10,   10,    1,  -10 },
-/* 0xF6 */ {  3347,   10,   14,   12,    1,  -10 },
-/* 0xF7 */ {  3365,    9,   14,    9,    0,  -10 },
-/* 0xF8 */ {  3381,   10,   14,   12,    1,  -10 },
-/* 0xF9 */ {  3399,   12,   10,   14,    1,  -10 },
-/* 0xFA */ {  3414,    6,   13,    4,   -1,  -13 },
-/* 0xFB */ {  3424,    8,   13,   10,    1,  -13 },
-/* 0xFC */ {  3437,    8,   13,   10,    1,  -13 },
-/* 0xFD */ {  3450,    8,   13,   10,    1,  -13 },
-/* 0xFE */ {  3463,   12,   13,   14,    1,  -13 },
-/* 0xFF */ {  3483,    0,    0,    5,    0,    0 },
-};
-
-const GFXfont FreeSans9pt_Win1253 PROGMEM = {
-(uint8_t*)FreeSans9pt_Win1253Bitmaps,
-(GFXglyph*)FreeSans9pt_Win1253Glyphs,
-0x01, 0xFF, 16
-};

src/graphics/niche/InkHUD/AppletFont.cpp

@@ -616,101 +616,6 @@ char InkHUD::AppletFont::applyEncoding(std::string utf8)
         }
     }
 
-    else if (encoding == WINDOWS_1253) {
-        // Greek
-        // 1-Byte chars: no remapping
-        if (utf8.length() == 1)
-            return utf8.at(0);
-
-        // Multi-byte chars:
-        switch (toUtf32(utf8)) {
-            // Windows-1253 special characters (0x80-0xBF range)
-            REMAP(0x20AC, 0x80) // EURO SIGN
-            REMAP(0x2018, 0x91) // LEFT SINGLE QUOTATION MARK
-            REMAP(0x2019, 0x92) // RIGHT SINGLE QUOTATION MARK
-            REMAP(0x201C, 0x93) // LEFT DOUBLE QUOTATION MARK
-            REMAP(0x201D, 0x94) // RIGHT DOUBLE QUOTATION MARK
-            REMAP(0x2022, 0x95) // BULLET
-            REMAP(0x2013, 0x96) // EN DASH
-            REMAP(0x2014, 0x97) // EM DASH
-
-            // Greek accented capitals
-            REMAP(0x0386, 0xA2) // GREEK CAPITAL LETTER ALPHA WITH TONOS
-            REMAP(0x0388, 0xB8) // GREEK CAPITAL LETTER EPSILON WITH TONOS
-            REMAP(0x0389, 0xB9) // GREEK CAPITAL LETTER ETA WITH TONOS
-            REMAP(0x038A, 0xBA) // GREEK CAPITAL LETTER IOTA WITH TONOS
-            REMAP(0x038C, 0xBC) // GREEK CAPITAL LETTER OMICRON WITH TONOS
-            REMAP(0x038E, 0xBE) // GREEK CAPITAL LETTER UPSILON WITH TONOS
-            REMAP(0x038F, 0xBF) // GREEK CAPITAL LETTER OMEGA WITH TONOS
-
-            // Greek capital letters (U+0391-U+03A9 -> 0xC1-0xD1, with gaps)
-            REMAP(0x0391, 0xC1) // GREEK CAPITAL LETTER ALPHA
-            REMAP(0x0392, 0xC2) // GREEK CAPITAL LETTER BETA
-            REMAP(0x0393, 0xC3) // GREEK CAPITAL LETTER GAMMA
-            REMAP(0x0394, 0xC4) // GREEK CAPITAL LETTER DELTA
-            REMAP(0x0395, 0xC5) // GREEK CAPITAL LETTER EPSILON
-            REMAP(0x0396, 0xC6) // GREEK CAPITAL LETTER ZETA
-            REMAP(0x0397, 0xC7) // GREEK CAPITAL LETTER ETA
-            REMAP(0x0398, 0xC8) // GREEK CAPITAL LETTER THETA
-            REMAP(0x0399, 0xC9) // GREEK CAPITAL LETTER IOTA
-            REMAP(0x039A, 0xCA) // GREEK CAPITAL LETTER KAPPA
-            REMAP(0x039B, 0xCB) // GREEK CAPITAL LETTER LAMDA
-            REMAP(0x039C, 0xCC) // GREEK CAPITAL LETTER MU
-            REMAP(0x039D, 0xCD) // GREEK CAPITAL LETTER NU
-            REMAP(0x039E, 0xCE) // GREEK CAPITAL LETTER XI
-            REMAP(0x039F, 0xCF) // GREEK CAPITAL LETTER OMICRON
-            REMAP(0x03A0, 0xD0) // GREEK CAPITAL LETTER PI
-            REMAP(0x03A1, 0xD1) // GREEK CAPITAL LETTER RHO
-            REMAP(0x03A3, 0xD3) // GREEK CAPITAL LETTER SIGMA
-            REMAP(0x03A4, 0xD4) // GREEK CAPITAL LETTER TAU
-            REMAP(0x03A5, 0xD5) // GREEK CAPITAL LETTER UPSILON
-            REMAP(0x03A6, 0xD6) // GREEK CAPITAL LETTER PHI
-            REMAP(0x03A7, 0xD7) // GREEK CAPITAL LETTER CHI
-            REMAP(0x03A8, 0xD8) // GREEK CAPITAL LETTER PSI
-            REMAP(0x03A9, 0xD9) // GREEK CAPITAL LETTER OMEGA
-
-            // Greek small letters with tonos (accented)
-            REMAP(0x03AC, 0xDC) // GREEK SMALL LETTER ALPHA WITH TONOS
-            REMAP(0x03AD, 0xDD) // GREEK SMALL LETTER EPSILON WITH TONOS
-            REMAP(0x03AE, 0xDE) // GREEK SMALL LETTER ETA WITH TONOS
-            REMAP(0x03AF, 0xDF) // GREEK SMALL LETTER IOTA WITH TONOS
-
-            // Greek small letters (U+03B1-U+03C9 -> 0xE1-0xF9)
-            REMAP(0x03B1, 0xE1) // GREEK SMALL LETTER ALPHA
-            REMAP(0x03B2, 0xE2) // GREEK SMALL LETTER BETA
-            REMAP(0x03B3, 0xE3) // GREEK SMALL LETTER GAMMA
-            REMAP(0x03B4, 0xE4) // GREEK SMALL LETTER DELTA
-            REMAP(0x03B5, 0xE5) // GREEK SMALL LETTER EPSILON
-            REMAP(0x03B6, 0xE6) // GREEK SMALL LETTER ZETA
-            REMAP(0x03B7, 0xE7) // GREEK SMALL LETTER ETA
-            REMAP(0x03B8, 0xE8) // GREEK SMALL LETTER THETA
-            REMAP(0x03B9, 0xE9) // GREEK SMALL LETTER IOTA
-            REMAP(0x03BA, 0xEA) // GREEK SMALL LETTER KAPPA
-            REMAP(0x03BB, 0xEB) // GREEK SMALL LETTER LAMDA
-            REMAP(0x03BC, 0xEC) // GREEK SMALL LETTER MU
-            REMAP(0x03BD, 0xED) // GREEK SMALL LETTER NU
-            REMAP(0x03BE, 0xEE) // GREEK SMALL LETTER XI
-            REMAP(0x03BF, 0xEF) // GREEK SMALL LETTER OMICRON
-            REMAP(0x03C0, 0xF0) // GREEK SMALL LETTER PI
-            REMAP(0x03C1, 0xF1) // GREEK SMALL LETTER RHO
-            REMAP(0x03C2, 0xF2) // GREEK SMALL LETTER FINAL SIGMA
-            REMAP(0x03C3, 0xF3) // GREEK SMALL LETTER SIGMA
-            REMAP(0x03C4, 0xF4) // GREEK SMALL LETTER TAU
-            REMAP(0x03C5, 0xF5) // GREEK SMALL LETTER UPSILON
-            REMAP(0x03C6, 0xF6) // GREEK SMALL LETTER PHI
-            REMAP(0x03C7, 0xF7) // GREEK SMALL LETTER CHI
-            REMAP(0x03C8, 0xF8) // GREEK SMALL LETTER PSI
-            REMAP(0x03C9, 0xF9) // GREEK SMALL LETTER OMEGA
-
-            // More accented small letters
-            REMAP(0x03CA, 0xFA) // GREEK SMALL LETTER IOTA WITH DIALYTIKA
-            REMAP(0x03CB, 0xFB) // GREEK SMALL LETTER UPSILON WITH DIALYTIKA
-            REMAP(0x03CC, 0xFC) // GREEK SMALL LETTER OMICRON WITH TONOS
-            REMAP(0x03CD, 0xFD) // GREEK SMALL LETTER UPSILON WITH TONOS
-            REMAP(0x03CE, 0xFE) // GREEK SMALL LETTER OMEGA WITH TONOS
-        }
-    }
-
     else /*ASCII or Unhandled*/ {
         if (utf8.length() == 1)
             return utf8.at(0);

src/graphics/niche/InkHUD/AppletFont.h

@@ -26,7 +26,6 @@ class AppletFont
         WINDOWS_1250,
         WINDOWS_1251,
         WINDOWS_1252,
-        WINDOWS_1253,
     };
 
     AppletFont();
@@ -85,12 +84,4 @@ class AppletFont
 #define FREESANS_9PT_WIN1252 InkHUD::AppletFont(FreeSans9pt_Win1252, InkHUD::AppletFont::WINDOWS_1252, -2, -1)
 #define FREESANS_6PT_WIN1252 InkHUD::AppletFont(FreeSans6pt_Win1252, InkHUD::AppletFont::WINDOWS_1252, -1, -2)
 
-// Greek
-#include "graphics/niche/Fonts/FreeSans12pt_Win1253.h"
-#include "graphics/niche/Fonts/FreeSans6pt_Win1253.h"
-#include "graphics/niche/Fonts/FreeSans9pt_Win1253.h"
-#define FREESANS_12PT_WIN1253 InkHUD::AppletFont(FreeSans12pt_Win1253, InkHUD::AppletFont::WINDOWS_1253, -3, 1)
-#define FREESANS_9PT_WIN1253 InkHUD::AppletFont(FreeSans9pt_Win1253, InkHUD::AppletFont::WINDOWS_1253, -2, -1)
-#define FREESANS_6PT_WIN1253 InkHUD::AppletFont(FreeSans6pt_Win1253, InkHUD::AppletFont::WINDOWS_1253, -1, -2)
-
 #endif

src/input/ButtonThread.cpp

@@ -37,9 +37,6 @@ bool ButtonThread::initButton(const ButtonConfig &config)
     _activeLow = config.activeLow;
     _touchQuirk = config.touchQuirk;
     _intRoutine = config.intRoutine;
-    _pressHandler = config.onPress;
-    _releaseHandler = config.onRelease;
-    _suppressLeadUp = config.suppressLeadUpSound;
     _longLongPress = config.longLongPress;
 
     userButton = OneButton(config.pinNumber, config.activeLow, config.activePullup);
@@ -136,8 +133,6 @@ int32_t ButtonThread::runOnce()
 
     // Detect start of button press
     if (buttonCurrentlyPressed && !buttonWasPressed) {
-        if (_pressHandler)
-            _pressHandler();
         buttonPressStartTime = millis();
         leadUpPlayed = false;
         leadUpSequenceActive = false;
@@ -145,7 +140,7 @@ int32_t ButtonThread::runOnce()
     }
 
     // Progressive lead-up sound system
-    if (!_suppressLeadUp && buttonCurrentlyPressed && (millis() - buttonPressStartTime) >= BUTTON_LEADUP_MS) {
+    if (buttonCurrentlyPressed && (millis() - buttonPressStartTime) >= BUTTON_LEADUP_MS) {
 
         // Start the progressive sequence if not already active
         if (!leadUpSequenceActive) {
@@ -165,8 +160,6 @@ int32_t ButtonThread::runOnce()
 
     // Reset when button is released
     if (!buttonCurrentlyPressed && buttonWasPressed) {
-        if (_releaseHandler)
-            _releaseHandler();
         leadUpSequenceActive = false;
         resetLeadUpSequence();
     }
@@ -248,21 +241,7 @@ int32_t ButtonThread::runOnce()
                 this->notifyObservers(&evt);
                 playComboTune();
                 break;
-#if !HAS_SCREEN
-            case 4:
-                if (moduleConfig.external_notification.enabled && externalNotificationModule) {
-                    externalNotificationModule->setMute(!externalNotificationModule->getMute());
-                    IF_SCREEN(if (!externalNotificationModule->getMute()) externalNotificationModule->stopNow();)
-                    if (externalNotificationModule->getMute()) {
-                        LOG_INFO("Temporarily Muted");
-                        play4ClickDown(); // Disable tone
-                    } else {
-                        LOG_INFO("Unmuted");
-                        play4ClickUp(); // Enable tone
-                    }
-                }
-                break;
-#endif
+
             // No valid multipress action
             default:
                 break;

src/input/ButtonThread.h

@@ -13,9 +13,6 @@ struct ButtonConfig {
     bool activePullup = true;
     uint32_t pullupSense = 0;
     voidFuncPtr intRoutine = nullptr;
-    voidFuncPtr onPress = nullptr;   // Optional edge callbacks
-    voidFuncPtr onRelease = nullptr; // Optional edge callbacks
-    bool suppressLeadUpSound = false;
     input_broker_event singlePress = INPUT_BROKER_NONE;
     input_broker_event longPress = INPUT_BROKER_NONE;
     uint16_t longPressTime = 500;
@@ -97,9 +94,6 @@ class ButtonThread : public Observable<const InputEvent *>, public concurrency::
     input_broker_event _shortLong = INPUT_BROKER_NONE;
 
     voidFuncPtr _intRoutine = nullptr;
-    voidFuncPtr _pressHandler = nullptr;
-    voidFuncPtr _releaseHandler = nullptr;
-    bool _suppressLeadUp = false;
     uint16_t _longPressTime = 500;
     uint16_t _longLongPressTime = 3900;
     int _pinNum = 0;

src/input/RotaryEncoderInterruptBase.cpp

@@ -93,8 +93,6 @@ int32_t RotaryEncoderInterruptBase::runOnce()
 
     if (!pressDetected) {
         this->action = ROTARY_ACTION_NONE;
-    } else if (now - pressStartTime < LONG_PRESS_DURATION) {
-        return (20); // keep checking for long/short until time expires
     }
 
     return INT32_MAX;

src/input/TrackballInterruptBase.cpp

@@ -1,7 +1,5 @@
 #include "TrackballInterruptBase.h"
-#include "Throttle.h"
 #include "configuration.h"
-
 extern bool osk_found;
 
 TrackballInterruptBase::TrackballInterruptBase(const char *name) : concurrency::OSThread(name), _originName(name) {}
@@ -57,27 +55,17 @@ int32_t TrackballInterruptBase::runOnce()
 {
     InputEvent e = {};
     e.inputEvent = INPUT_BROKER_NONE;
-#if TB_THRESHOLD
-    if (lastInterruptTime && !Throttle::isWithinTimespanMs(lastInterruptTime, 1000)) {
-        left_counter = 0;
-        right_counter = 0;
-        up_counter = 0;
-        down_counter = 0;
-        lastInterruptTime = 0;
-    }
-#ifdef INPUT_DEBUG
-    if (left_counter > 0 || right_counter > 0 || up_counter > 0 || down_counter > 0) {
-        LOG_DEBUG("L %u R %u U %u D %u, time %u", left_counter, right_counter, up_counter, down_counter, millis());
-    }
-#endif
-#endif
 
     // Handle long press detection for press button
     if (pressDetected && pressStartTime > 0) {
         uint32_t pressDuration = millis() - pressStartTime;
         bool buttonStillPressed = false;
 
+#if defined(T_DECK)
+        buttonStillPressed = (this->action == TB_ACTION_PRESSED);
+#else
         buttonStillPressed = !digitalRead(_pinPress);
+#endif
 
         if (!buttonStillPressed) {
             // Button released
@@ -146,31 +134,23 @@ int32_t TrackballInterruptBase::runOnce()
         }
     }
 
-#if TB_THRESHOLD
-    if (this->action == TB_ACTION_PRESSED && (!pressDetected || pressStartTime == 0)) {
+#if defined(T_DECK) // T-deck gets a super-simple debounce on trackball
+    if (this->action == TB_ACTION_PRESSED && !pressDetected) {
         // Start long press detection
         pressDetected = true;
         pressStartTime = millis();
         // Don't send event yet, wait to see if it's a long press
-    } else if (up_counter >= TB_THRESHOLD) {
-#ifdef INPUT_DEBUG
-        LOG_DEBUG("Trackball event UP %u", millis());
-#endif
+    } else if (this->action == TB_ACTION_UP && lastEvent == TB_ACTION_UP) {
+        // LOG_DEBUG("Trackball event UP");
         e.inputEvent = this->_eventUp;
-    } else if (down_counter >= TB_THRESHOLD) {
-#ifdef INPUT_DEBUG
-        LOG_DEBUG("Trackball event DOWN %u", millis());
-#endif
+    } else if (this->action == TB_ACTION_DOWN && lastEvent == TB_ACTION_DOWN) {
+        // LOG_DEBUG("Trackball event DOWN");
         e.inputEvent = this->_eventDown;
-    } else if (left_counter >= TB_THRESHOLD) {
-#ifdef INPUT_DEBUG
-        LOG_DEBUG("Trackball event LEFT %u", millis());
-#endif
+    } else if (this->action == TB_ACTION_LEFT && lastEvent == TB_ACTION_LEFT) {
+        // LOG_DEBUG("Trackball event LEFT");
         e.inputEvent = this->_eventLeft;
-    } else if (right_counter >= TB_THRESHOLD) {
-#ifdef INPUT_DEBUG
-        LOG_DEBUG("Trackball event RIGHT %u", millis());
-#endif
+    } else if (this->action == TB_ACTION_RIGHT && lastEvent == TB_ACTION_RIGHT) {
+        // LOG_DEBUG("Trackball event RIGHT");
         e.inputEvent = this->_eventRight;
     }
 #else
@@ -203,12 +183,6 @@ int32_t TrackballInterruptBase::runOnce()
         e.source = this->_originName;
         e.kbchar = 0x00;
         this->notifyObservers(&e);
-#if TB_THRESHOLD
-        left_counter = 0;
-        right_counter = 0;
-        up_counter = 0;
-        down_counter = 0;
-#endif
     }
 
     // Only update lastEvent for non-press actions or completed press actions
@@ -224,49 +198,25 @@ int32_t TrackballInterruptBase::runOnce()
 
 void TrackballInterruptBase::intPressHandler()
 {
-    if (!Throttle::isWithinTimespanMs(lastInterruptTime, 10))
-        this->action = TB_ACTION_PRESSED;
-    lastInterruptTime = millis();
+    this->action = TB_ACTION_PRESSED;
 }
 
 void TrackballInterruptBase::intDownHandler()
 {
-    if (TB_THRESHOLD || !Throttle::isWithinTimespanMs(lastInterruptTime, 10))
-        this->action = TB_ACTION_DOWN;
-    lastInterruptTime = millis();
-
-#if TB_THRESHOLD
-    down_counter++;
-#endif
+    this->action = TB_ACTION_DOWN;
 }
 
 void TrackballInterruptBase::intUpHandler()
 {
-    if (TB_THRESHOLD || !Throttle::isWithinTimespanMs(lastInterruptTime, 10))
-        this->action = TB_ACTION_UP;
-    lastInterruptTime = millis();
-
-#if TB_THRESHOLD
-    up_counter++;
-#endif
+    this->action = TB_ACTION_UP;
 }
 
 void TrackballInterruptBase::intLeftHandler()
 {
-    if (TB_THRESHOLD || !Throttle::isWithinTimespanMs(lastInterruptTime, 10))
-        this->action = TB_ACTION_LEFT;
-    lastInterruptTime = millis();
-#if TB_THRESHOLD
-    left_counter++;
-#endif
+    this->action = TB_ACTION_LEFT;
 }
 
 void TrackballInterruptBase::intRightHandler()
 {
-    if (TB_THRESHOLD || !Throttle::isWithinTimespanMs(lastInterruptTime, 10))
-        this->action = TB_ACTION_RIGHT;
-    lastInterruptTime = millis();
-#if TB_THRESHOLD
-    right_counter++;
-#endif
+    this->action = TB_ACTION_RIGHT;
 }

src/input/TrackballInterruptBase.h

@@ -12,10 +12,6 @@
 #endif
 #endif
 
-#ifndef TB_THRESHOLD
-#define TB_THRESHOLD 0
-#endif
-
 class TrackballInterruptBase : public Observable<const InputEvent *>, public concurrency::OSThread
 {
   public:
@@ -29,6 +25,8 @@ class TrackballInterruptBase : public Observable<const InputEvent *>, public con
     void intUpHandler();
     void intLeftHandler();
     void intRightHandler();
+    uint32_t lastTime = 0;
+
     virtual int32_t runOnce() override;
 
   protected:
@@ -69,12 +67,4 @@ class TrackballInterruptBase : public Observable<const InputEvent *>, public con
     input_broker_event _eventPressedLong = INPUT_BROKER_NONE;
     const char *_originName;
     TrackballInterruptBaseActionType lastEvent = TB_ACTION_NONE;
-    volatile uint32_t lastInterruptTime = 0;
-
-#if TB_THRESHOLD
-    volatile uint8_t left_counter = 0;
-    volatile uint8_t right_counter = 0;
-    volatile uint8_t up_counter = 0;
-    volatile uint8_t down_counter = 0;
-#endif
 };

src/input/TrackballInterruptImpl1.cpp

@@ -24,26 +24,41 @@ void TrackballInterruptImpl1::init(uint8_t pinDown, uint8_t pinUp, uint8_t pinLe
 
 void TrackballInterruptImpl1::handleIntDown()
 {
-    trackballInterruptImpl1->intDownHandler();
-    trackballInterruptImpl1->setIntervalFromNow(20);
+    if (TB_DIRECTION == RISING || millis() > trackballInterruptImpl1->lastTime + 10) {
+        trackballInterruptImpl1->lastTime = millis();
+        trackballInterruptImpl1->intDownHandler();
+        trackballInterruptImpl1->setIntervalFromNow(20);
+    }
 }
 void TrackballInterruptImpl1::handleIntUp()
 {
-    trackballInterruptImpl1->intUpHandler();
-    trackballInterruptImpl1->setIntervalFromNow(20);
+    if (TB_DIRECTION == RISING || millis() > trackballInterruptImpl1->lastTime + 10) {
+        trackballInterruptImpl1->lastTime = millis();
+        trackballInterruptImpl1->intUpHandler();
+        trackballInterruptImpl1->setIntervalFromNow(20);
+    }
 }
 void TrackballInterruptImpl1::handleIntLeft()
 {
-    trackballInterruptImpl1->intLeftHandler();
-    trackballInterruptImpl1->setIntervalFromNow(20);
+    if (TB_DIRECTION == RISING || millis() > trackballInterruptImpl1->lastTime + 10) {
+        trackballInterruptImpl1->lastTime = millis();
+        trackballInterruptImpl1->intLeftHandler();
+        trackballInterruptImpl1->setIntervalFromNow(20);
+    }
 }
 void TrackballInterruptImpl1::handleIntRight()
 {
-    trackballInterruptImpl1->intRightHandler();
-    trackballInterruptImpl1->setIntervalFromNow(20);
+    if (TB_DIRECTION == RISING || millis() > trackballInterruptImpl1->lastTime + 10) {
+        trackballInterruptImpl1->lastTime = millis();
+        trackballInterruptImpl1->intRightHandler();
+        trackballInterruptImpl1->setIntervalFromNow(20);
+    }
 }
 void TrackballInterruptImpl1::handleIntPressed()
 {
-    trackballInterruptImpl1->intPressHandler();
-    trackballInterruptImpl1->setIntervalFromNow(20);
+    if (TB_DIRECTION == RISING || millis() > trackballInterruptImpl1->lastTime + 10) {
+        trackballInterruptImpl1->lastTime = millis();
+        trackballInterruptImpl1->intPressHandler();
+        trackballInterruptImpl1->setIntervalFromNow(20);
+    }
 }

src/main.cpp

@@ -10,7 +10,6 @@
 #include "ReliableRouter.h"
 #include "airtime.h"
 #include "buzz.h"
-#include "power/PowerHAL.h"
 
 #include "FSCommon.h"
 #include "Led.h"
@@ -39,8 +38,9 @@
 #include "target_specific.h"
 #include <memory>
 #include <utility>
-#if HAS_SCREEN
-#include "MessageStore.h"
+
+#ifdef ELECROW_ThinkNode_M5
+PCA9557 io(0x18, &Wire);
 #endif
 
 #ifdef ARCH_ESP32
@@ -73,62 +73,40 @@ NRF52Bluetooth *nrf52Bluetooth = nullptr;
 #include "mqtt/MQTT.h"
 #endif
 
+#include "LLCC68Interface.h"
+#include "LR1110Interface.h"
+#include "LR1120Interface.h"
+#include "LR1121Interface.h"
+#include "RF95Interface.h"
+#include "SX1262Interface.h"
+#include "SX1268Interface.h"
+#include "SX1280Interface.h"
+#include "detect/LoRaRadioType.h"
+
+#ifdef ARCH_STM32WL
+#include "STM32WLE5JCInterface.h"
+#endif
+
+#if defined(ARCH_PORTDUINO)
+#include "platform/portduino/SimRadio.h"
+#endif
+
 #ifdef ARCH_PORTDUINO
 #include "linux/LinuxHardwareI2C.h"
 #include "mesh/raspihttp/PiWebServer.h"
 #include "platform/portduino/PortduinoGlue.h"
+#include "platform/portduino/USBHal.h"
 #include <cstdlib>
 #include <fstream>
 #include <iostream>
 #include <string>
 #endif
 
-#ifdef ARCH_ESP32
-#ifdef DEBUG_PARTITION_TABLE
-#include "esp_partition.h"
-
-void printPartitionTable()
-{
-    printf("\n--- Partition Table ---\n");
-    // Print Column Headers
-    printf("| %-16s | %-4s | %-7s | %-10s | %-10s |\n", "Label", "Type", "Subtype", "Offset", "Size");
-    printf("|------------------|------|---------|------------|------------|\n");
-
-    // Create an iterator to find ALL partitions (Type ANY, Subtype ANY)
-    esp_partition_iterator_t it = esp_partition_find(ESP_PARTITION_TYPE_ANY, ESP_PARTITION_SUBTYPE_ANY, NULL);
-
-    // Loop through the iterator
-    if (it != NULL) {
-        do {
-            const esp_partition_t *part = esp_partition_get(it);
-
-            // Print details: Label, Type (Hex), Subtype (Hex), Offset (Hex), Size (Hex)
-            printf("| %-16s | 0x%02x | 0x%02x    | 0x%08x | 0x%08x |\n", part->label, part->type, part->subtype, part->address,
-                   part->size);
-
-            // Move to next partition
-            it = esp_partition_next(it);
-        } while (it != NULL);
-
-        // Release the iterator memory
-        esp_partition_iterator_release(it);
-    } else {
-        printf("No partitions found.\n");
-    }
-    printf("-----------------------\n");
-}
-#endif // DEBUG_PARTITION_TABLE
-#endif // ARCH_ESP32
-
 #if HAS_BUTTON || defined(ARCH_PORTDUINO)
 #include "input/ButtonThread.h"
 
 #if defined(BUTTON_PIN_TOUCH)
 ButtonThread *TouchButtonThread = nullptr;
-#if defined(TTGO_T_ECHO_PLUS) && defined(PIN_EINK_EN)
-static bool touchBacklightWasOn = false;
-static bool touchBacklightActive = false;
-#endif
 #endif
 
 #if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
@@ -227,10 +205,13 @@ ScanI2C::FoundDevice rgb_found = ScanI2C::FoundDevice(ScanI2C::DeviceType::NONE,
 /// The I2C address of our Air Quality Indicator (if found)
 ScanI2C::DeviceAddress aqi_found = ScanI2C::ADDRESS_NONE;
 
-#ifdef HAS_DRV2605
+#if defined(T_WATCH_S3) || defined(T_LORA_PAGER)
 Adafruit_DRV2605 drv;
 #endif
 
+// Global LoRa radio type
+LoRaRadioType radioType = NO_RADIO;
+
 bool isVibrating = false;
 
 bool eink_found = true;
@@ -267,7 +248,6 @@ const char *getDeviceName()
     return name;
 }
 
-// TODO remove from main.cpp
 static int32_t ledBlinker()
 {
     // Still set up the blinking (heartbeat) interval but skip code path below, so LED will blink if
@@ -308,46 +288,6 @@ __attribute__((weak, noinline)) bool loopCanSleep()
 void lateInitVariant() __attribute__((weak));
 void lateInitVariant() {}
 
-void earlyInitVariant() __attribute__((weak));
-void earlyInitVariant() {}
-
-// NRF52 (and probably other platforms) can report when system is in power failure mode
-// (eg. too low battery voltage) and operating it is unsafe (data corruption, bootloops, etc).
-// For example NRF52 will prevent any flash writes in that case automatically
-// (but it causes issues we need to handle).
-// This detection is independent from whatever ADC or dividers used in Meshtastic
-// boards and is internal to chip.
-
-// we use powerHAL layer to get this info and delay booting until power level is safe
-
-// wait until power level is safe to continue booting (to avoid bootloops)
-// blink user led in 3 flashes sequence to indicate what is happening
-void waitUntilPowerLevelSafe()
-{
-
-#ifdef LED_PIN
-    pinMode(LED_PIN, OUTPUT);
-#endif
-
-    while (powerHAL_isPowerLevelSafe() == false) {
-
-#ifdef LED_PIN
-
-        // 3x: blink for 300 ms, pause for 300 ms
-
-        for (int i = 0; i < 3; i++) {
-            digitalWrite(LED_PIN, LED_STATE_ON);
-            delay(300);
-            digitalWrite(LED_PIN, LED_STATE_OFF);
-            delay(300);
-        }
-#endif
-
-        // sleep for 2s
-        delay(2000);
-    }
-}
-
 /**
  * Print info as a structured log message (for automated log processing)
  */
@@ -358,22 +298,26 @@ void printInfo()
 #ifndef PIO_UNIT_TESTING
 void setup()
 {
-
-    // initialize power HAL layer as early as possible
-    powerHAL_init();
-
-    // prevent booting if device is in power failure mode
-    // boot sequence will follow when battery level raises to safe mode
-    waitUntilPowerLevelSafe();
-
-    // Defined in variant.cpp for early init code
-    earlyInitVariant();
+#if defined(R1_NEO)
+    pinMode(DCDC_EN_HOLD, OUTPUT);
+    digitalWrite(DCDC_EN_HOLD, HIGH);
+    pinMode(NRF_ON, OUTPUT);
+    digitalWrite(NRF_ON, HIGH);
+#endif
 
 #if defined(PIN_POWER_EN)
     pinMode(PIN_POWER_EN, OUTPUT);
     digitalWrite(PIN_POWER_EN, HIGH);
 #endif
 
+#if defined(ELECROW_ThinkNode_M5)
+    Wire.begin(48, 47);
+    io.pinMode(PCA_PIN_EINK_EN, OUTPUT);
+    io.pinMode(PCA_PIN_POWER_EN, OUTPUT);
+    io.digitalWrite(PCA_PIN_POWER_EN, HIGH);
+    // io.pinMode(C2_PIN, OUTPUT);
+#endif
+
 #ifdef LED_POWER
     pinMode(LED_POWER, OUTPUT);
     digitalWrite(LED_POWER, LED_STATE_ON);
@@ -398,7 +342,68 @@ void setup()
 #endif
 #endif
 
+#if defined(T_DECK)
+    // GPIO10 manages all peripheral power supplies
+    // Turn on peripheral power immediately after MUC starts.
+    // If some boards are turned on late, ESP32 will reset due to low voltage.
+    // ESP32-C3(Keyboard) , MAX98357A(Audio Power Amplifier) ,
+    // TF Card , Display backlight(AW9364DNR) , AN48841B(Trackball) , ES7210(Decoder)
+    pinMode(KB_POWERON, OUTPUT);
+    digitalWrite(KB_POWERON, HIGH);
+    // T-Deck has all three SPI peripherals (TFT, SD, LoRa) attached to the same SPI bus
+    // We need to initialize all CS pins in advance otherwise there will be SPI communication issues
+    // e.g. when detecting the SD card
+    pinMode(LORA_CS, OUTPUT);
+    digitalWrite(LORA_CS, HIGH);
+    pinMode(SDCARD_CS, OUTPUT);
+    digitalWrite(SDCARD_CS, HIGH);
+    pinMode(TFT_CS, OUTPUT);
+    digitalWrite(TFT_CS, HIGH);
+    delay(100);
+#elif defined(T_DECK_PRO)
+    pinMode(LORA_EN, OUTPUT);
+    digitalWrite(LORA_EN, HIGH);
+    pinMode(LORA_CS, OUTPUT);
+    digitalWrite(LORA_CS, HIGH);
+    pinMode(SDCARD_CS, OUTPUT);
+    digitalWrite(SDCARD_CS, HIGH);
+    pinMode(PIN_EINK_CS, OUTPUT);
+    digitalWrite(PIN_EINK_CS, HIGH);
+#elif defined(T_LORA_PAGER)
+    pinMode(LORA_CS, OUTPUT);
+    digitalWrite(LORA_CS, HIGH);
+    pinMode(SDCARD_CS, OUTPUT);
+    digitalWrite(SDCARD_CS, HIGH);
+    pinMode(TFT_CS, OUTPUT);
+    digitalWrite(TFT_CS, HIGH);
+    pinMode(KB_INT, INPUT_PULLUP);
+    // io expander
+    io.begin(Wire, XL9555_SLAVE_ADDRESS0, SDA, SCL);
+    io.pinMode(EXPANDS_DRV_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_DRV_EN, HIGH);
+    io.pinMode(EXPANDS_AMP_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_AMP_EN, LOW);
+    io.pinMode(EXPANDS_LORA_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_LORA_EN, HIGH);
+    io.pinMode(EXPANDS_GPS_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_GPS_EN, HIGH);
+    io.pinMode(EXPANDS_KB_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_KB_EN, HIGH);
+    io.pinMode(EXPANDS_SD_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_SD_EN, HIGH);
+    io.pinMode(EXPANDS_GPIO_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_GPIO_EN, HIGH);
+    io.pinMode(EXPANDS_SD_PULLEN, INPUT);
+#elif defined(HACKADAY_COMMUNICATOR)
+    pinMode(KB_INT, INPUT);
+#endif
+
     concurrency::hasBeenSetup = true;
+#if ARCH_PORTDUINO
+    SPISettings spiSettings(portduino_config.spiSpeed, MSBFIRST, SPI_MODE0);
+#else
+    SPISettings spiSettings(4000000, MSBFIRST, SPI_MODE0);
+#endif
 
     meshtastic_Config_DisplayConfig_OledType screen_model =
         meshtastic_Config_DisplayConfig_OledType::meshtastic_Config_DisplayConfig_OledType_OLED_AUTO;
@@ -537,7 +542,6 @@ void setup()
 
     OSThread::setup();
 
-    // TODO make this ifdef based on defined pins and move from main.cpp
 #if defined(ELECROW_ThinkNode_M1) || defined(ELECROW_ThinkNode_M2)
     // The ThinkNodes have their own blink logic
     // ledPeriodic = new Periodic("Blink", elecrowLedBlinker);
@@ -563,7 +567,6 @@ void setup()
     Wire.setSCL(I2C_SCL);
     Wire.begin();
 #elif defined(I2C_SDA) && !defined(ARCH_RP2040)
-    LOG_INFO("Starting Bus with (SDA) %d and (SCL) %d: ", I2C_SDA, I2C_SCL);
     Wire.begin(I2C_SDA, I2C_SCL);
 #elif defined(ARCH_PORTDUINO)
     if (portduino_config.i2cdev != "") {
@@ -637,11 +640,7 @@ void setup()
         sensor_detected = true;
 #endif
     }
-#ifdef ARCH_ESP32
-#ifdef DEBUG_PARTITION_TABLE
-    printPartitionTable();
-#endif
-#endif // ARCH_ESP32
+
 #ifdef ARCH_ESP32
     // Don't init display if we don't have one or we are waking headless due to a timer event
     if (wakeCause == ESP_SLEEP_WAKEUP_TIMER) {
@@ -752,12 +751,11 @@ void setup()
     scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::INA219, meshtastic_TelemetrySensorType_INA219);
     scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::INA3221, meshtastic_TelemetrySensorType_INA3221);
     scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::MAX17048, meshtastic_TelemetrySensorType_MAX17048);
-    scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::QMC6310U, meshtastic_TelemetrySensorType_QMC6310);
-    // TODO: Types need to be added meshtastic_TelemetrySensorType_QMC6310N
-    //  scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::QMC6310N, meshtastic_TelemetrySensorType_QMC6310N);
+    scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::QMC6310, meshtastic_TelemetrySensorType_QMC6310);
     scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::QMI8658, meshtastic_TelemetrySensorType_QMI8658);
     scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::QMC5883L, meshtastic_TelemetrySensorType_QMC5883L);
     scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::HMC5883L, meshtastic_TelemetrySensorType_QMC5883L);
+    scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::PMSA0031, meshtastic_TelemetrySensorType_PMSA003I);
     scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::MLX90614, meshtastic_TelemetrySensorType_MLX90614);
     scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::ICM20948, meshtastic_TelemetrySensorType_ICM20948);
     scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::MAX30102, meshtastic_TelemetrySensorType_MAX30102);
@@ -797,6 +795,7 @@ void setup()
     // We do this as early as possible because this loads preferences from flash
     // but we need to do this after main cpu init (esp32setup), because we need the random seed set
     nodeDB = new NodeDB;
+
 #if HAS_TFT
     if (config.display.displaymode == meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
         tftSetup();
@@ -842,12 +841,7 @@ void setup()
 #endif
 #endif
 
-#ifdef HAS_DRV2605
-#if defined(PIN_DRV_EN)
-    pinMode(PIN_DRV_EN, OUTPUT);
-    digitalWrite(PIN_DRV_EN, HIGH);
-    delay(10);
-#endif
+#if defined(T_WATCH_S3) || defined(T_LORA_PAGER)
     drv.begin();
     drv.selectLibrary(1);
     // I2C trigger by sending 'go' command
@@ -883,7 +877,7 @@ void setup()
     SPI.begin();
 #endif
 #else
-// ESP32
+        // ESP32
 #if defined(HW_SPI1_DEVICE)
     SPI1.begin(LORA_SCK, LORA_MISO, LORA_MOSI, LORA_CS);
     LOG_DEBUG("SPI1.begin(SCK=%d, MISO=%d, MOSI=%d, NSS=%d)", LORA_SCK, LORA_MISO, LORA_MOSI, LORA_CS);
@@ -915,7 +909,6 @@ void setup()
     }
 #endif // HAS_SCREEN
 
-    // TODO Remove magic string
     // setup TZ prior to time actions.
 #if !MESHTASTIC_EXCLUDE_TZ
     LOG_DEBUG("Use compiled/slipstreamed %s", slipstreamTZString); // important, removing this clobbers our magic string
@@ -1053,24 +1046,6 @@ void setup()
     };
     touchConfig.singlePress = INPUT_BROKER_NONE;
     touchConfig.longPress = INPUT_BROKER_BACK;
-#if defined(TTGO_T_ECHO_PLUS) && defined(PIN_EINK_EN)
-    // On T-Echo Plus the touch pad should only drive the backlight, not UI navigation/sounds
-    touchConfig.longPress = INPUT_BROKER_NONE;
-    touchConfig.suppressLeadUpSound = true;
-    touchConfig.onPress = []() {
-        touchBacklightWasOn = uiconfig.screen_brightness == 1;
-        if (!touchBacklightWasOn) {
-            digitalWrite(PIN_EINK_EN, HIGH);
-        }
-        touchBacklightActive = true;
-    };
-    touchConfig.onRelease = []() {
-        if (touchBacklightActive && !touchBacklightWasOn) {
-            digitalWrite(PIN_EINK_EN, LOW);
-        }
-        touchBacklightActive = false;
-    };
-#endif
     TouchButtonThread->initButton(touchConfig);
 #endif
 
@@ -1211,7 +1186,252 @@ void setup()
 #endif
 #endif
 
-    initLoRa();
+#ifdef ARCH_PORTDUINO
+    // as one can't use a function pointer to the class constructor:
+    auto loraModuleInterface = [](LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst,
+                                  RADIOLIB_PIN_TYPE busy) {
+        switch (portduino_config.lora_module) {
+        case use_rf95:
+            return (RadioInterface *)new RF95Interface(hal, cs, irq, rst, busy);
+        case use_sx1262:
+            return (RadioInterface *)new SX1262Interface(hal, cs, irq, rst, busy);
+        case use_sx1268:
+            return (RadioInterface *)new SX1268Interface(hal, cs, irq, rst, busy);
+        case use_sx1280:
+            return (RadioInterface *)new SX1280Interface(hal, cs, irq, rst, busy);
+        case use_lr1110:
+            return (RadioInterface *)new LR1110Interface(hal, cs, irq, rst, busy);
+        case use_lr1120:
+            return (RadioInterface *)new LR1120Interface(hal, cs, irq, rst, busy);
+        case use_lr1121:
+            return (RadioInterface *)new LR1121Interface(hal, cs, irq, rst, busy);
+        case use_llcc68:
+            return (RadioInterface *)new LLCC68Interface(hal, cs, irq, rst, busy);
+        case use_simradio:
+            return (RadioInterface *)new SimRadio;
+        default:
+            assert(0); // shouldn't happen
+            return (RadioInterface *)nullptr;
+        }
+    };
+
+    LOG_DEBUG("Activate %s radio on SPI port %s", portduino_config.loraModules[portduino_config.lora_module].c_str(),
+              portduino_config.lora_spi_dev.c_str());
+    if (portduino_config.lora_spi_dev == "ch341") {
+        RadioLibHAL = ch341Hal;
+    } else {
+        RadioLibHAL = new LockingArduinoHal(SPI, spiSettings);
+    }
+    rIf =
+        loraModuleInterface((LockingArduinoHal *)RadioLibHAL, portduino_config.lora_cs_pin.pin, portduino_config.lora_irq_pin.pin,
+                            portduino_config.lora_reset_pin.pin, portduino_config.lora_busy_pin.pin);
+
+    if (!rIf->init()) {
+        LOG_WARN("No %s radio", portduino_config.loraModules[portduino_config.lora_module].c_str());
+        delete rIf;
+        rIf = NULL;
+        exit(EXIT_FAILURE);
+    } else {
+        LOG_INFO("%s init success", portduino_config.loraModules[portduino_config.lora_module].c_str());
+    }
+
+#elif defined(HW_SPI1_DEVICE)
+    LockingArduinoHal *RadioLibHAL = new LockingArduinoHal(SPI1, spiSettings);
+#else // HW_SPI1_DEVICE
+    LockingArduinoHal *RadioLibHAL = new LockingArduinoHal(SPI, spiSettings);
+#endif
+
+    // radio init MUST BE AFTER service.init, so we have our radio config settings (from nodedb init)
+#if defined(USE_STM32WLx)
+    if (!rIf) {
+        rIf = new STM32WLE5JCInterface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
+        if (!rIf->init()) {
+            LOG_WARN("No STM32WL radio");
+            delete rIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("STM32WL init success");
+            radioType = STM32WLx_RADIO;
+        }
+    }
+#endif
+
+#if defined(RF95_IRQ) && RADIOLIB_EXCLUDE_SX127X != 1
+    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
+        rIf = new RF95Interface(RadioLibHAL, LORA_CS, RF95_IRQ, RF95_RESET, RF95_DIO1);
+        if (!rIf->init()) {
+            LOG_WARN("No RF95 radio");
+            delete rIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("RF95 init success");
+            radioType = RF95_RADIO;
+        }
+    }
+#endif
+
+#if defined(USE_SX1262) && !defined(ARCH_PORTDUINO) && !defined(TCXO_OPTIONAL) && RADIOLIB_EXCLUDE_SX126X != 1
+    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
+        auto *sxIf = new SX1262Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
+#ifdef SX126X_DIO3_TCXO_VOLTAGE
+        sxIf->setTCXOVoltage(SX126X_DIO3_TCXO_VOLTAGE);
+#endif
+        if (!sxIf->init()) {
+            LOG_WARN("No SX1262 radio");
+            delete sxIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("SX1262 init success");
+            rIf = sxIf;
+            radioType = SX1262_RADIO;
+        }
+    }
+#endif
+
+#if defined(USE_SX1262) && !defined(ARCH_PORTDUINO) && defined(TCXO_OPTIONAL)
+    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
+        // try using the specified TCXO voltage
+        auto *sxIf = new SX1262Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
+        sxIf->setTCXOVoltage(SX126X_DIO3_TCXO_VOLTAGE);
+        if (!sxIf->init()) {
+            LOG_WARN("No SX1262 radio with TCXO, Vref %fV", SX126X_DIO3_TCXO_VOLTAGE);
+            delete sxIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("SX1262 init success, TCXO, Vref %fV", SX126X_DIO3_TCXO_VOLTAGE);
+            rIf = sxIf;
+            radioType = SX1262_RADIO;
+        }
+    }
+
+    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
+        // If specified TCXO voltage fails, attempt to use DIO3 as a reference instead
+        rIf = new SX1262Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
+        if (!rIf->init()) {
+            LOG_WARN("No SX1262 radio with XTAL, Vref 0.0V");
+            delete rIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("SX1262 init success, XTAL, Vref 0.0V");
+            radioType = SX1262_RADIO;
+        }
+    }
+#endif
+
+#if defined(USE_SX1268)
+#if defined(SX126X_DIO3_TCXO_VOLTAGE) && defined(TCXO_OPTIONAL)
+    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
+        // try using the specified TCXO voltage
+        auto *sxIf = new SX1268Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
+        sxIf->setTCXOVoltage(SX126X_DIO3_TCXO_VOLTAGE);
+        if (!sxIf->init()) {
+            LOG_WARN("No SX1268 radio with TCXO, Vref %fV", SX126X_DIO3_TCXO_VOLTAGE);
+            delete sxIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("SX1268 init success, TCXO, Vref %fV", SX126X_DIO3_TCXO_VOLTAGE);
+            rIf = sxIf;
+            radioType = SX1268_RADIO;
+        }
+    }
+#endif
+    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
+        rIf = new SX1268Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
+        if (!rIf->init()) {
+            LOG_WARN("No SX1268 radio");
+            delete rIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("SX1268 init success");
+            radioType = SX1268_RADIO;
+        }
+    }
+#endif
+
+#if defined(USE_LLCC68)
+    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
+        rIf = new LLCC68Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
+        if (!rIf->init()) {
+            LOG_WARN("No LLCC68 radio");
+            delete rIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("LLCC68 init success");
+            radioType = LLCC68_RADIO;
+        }
+    }
+#endif
+
+#if defined(USE_LR1110) && RADIOLIB_EXCLUDE_LR11X0 != 1
+    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
+        rIf = new LR1110Interface(RadioLibHAL, LR1110_SPI_NSS_PIN, LR1110_IRQ_PIN, LR1110_NRESET_PIN, LR1110_BUSY_PIN);
+        if (!rIf->init()) {
+            LOG_WARN("No LR1110 radio");
+            delete rIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("LR1110 init success");
+            radioType = LR1110_RADIO;
+        }
+    }
+#endif
+
+#if defined(USE_LR1120) && RADIOLIB_EXCLUDE_LR11X0 != 1
+    if (!rIf) {
+        rIf = new LR1120Interface(RadioLibHAL, LR1120_SPI_NSS_PIN, LR1120_IRQ_PIN, LR1120_NRESET_PIN, LR1120_BUSY_PIN);
+        if (!rIf->init()) {
+            LOG_WARN("No LR1120 radio");
+            delete rIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("LR1120 init success");
+            radioType = LR1120_RADIO;
+        }
+    }
+#endif
+
+#if defined(USE_LR1121) && RADIOLIB_EXCLUDE_LR11X0 != 1
+    if (!rIf) {
+        rIf = new LR1121Interface(RadioLibHAL, LR1121_SPI_NSS_PIN, LR1121_IRQ_PIN, LR1121_NRESET_PIN, LR1121_BUSY_PIN);
+        if (!rIf->init()) {
+            LOG_WARN("No LR1121 radio");
+            delete rIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("LR1121 init success");
+            radioType = LR1121_RADIO;
+        }
+    }
+#endif
+
+#if defined(USE_SX1280) && RADIOLIB_EXCLUDE_SX128X != 1
+    if (!rIf) {
+        rIf = new SX1280Interface(RadioLibHAL, SX128X_CS, SX128X_DIO1, SX128X_RESET, SX128X_BUSY);
+        if (!rIf->init()) {
+            LOG_WARN("No SX1280 radio");
+            delete rIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("SX1280 init success");
+            radioType = SX1280_RADIO;
+        }
+    }
+#endif
+
+    // check if the radio chip matches the selected region
+    if ((config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_LORA_24) && rIf && (!rIf->wideLora())) {
+        LOG_WARN("LoRa chip does not support 2.4GHz. Revert to unset");
+        config.lora.region = meshtastic_Config_LoRaConfig_RegionCode_UNSET;
+        nodeDB->saveToDisk(SEGMENT_CONFIG);
+
+        if (!rIf->reconfigure()) {
+            LOG_WARN("Reconfigure failed, rebooting");
+            if (screen) {
+                screen->showSimpleBanner("Rebooting...");
+            }
+            rebootAtMsec = millis() + 5000;
+        }
+    }
 
     lateInitVariant(); // Do board specific init (see extra_variants/README.md for documentation)
 
@@ -1292,15 +1512,13 @@ void setup()
 }
 
 #endif
-uint32_t rebootAtMsec;     // If not zero we will reboot at this time (used to reboot shortly after the update completes)
-uint32_t shutdownAtMsec;   // If not zero we will shutdown at this time (used to shutdown from python or mobile client)
-bool suppressRebootBanner; // If true, suppress "Rebooting..." overlay (used for OTA handoff)
+uint32_t rebootAtMsec;   // If not zero we will reboot at this time (used to reboot shortly after the update completes)
+uint32_t shutdownAtMsec; // If not zero we will shutdown at this time (used to shutdown from python or mobile client)
 
 // If a thread does something that might need for it to be rescheduled ASAP it can set this flag
 // This will suppress the current delay and instead try to run ASAP.
 bool runASAP;
 
-// TODO find better home than main.cpp
 extern meshtastic_DeviceMetadata getDeviceMetadata()
 {
     meshtastic_DeviceMetadata deviceMetadata;
@@ -1401,49 +1619,13 @@ void loop()
     if (inputBroker)
         inputBroker->processInputEventQueue();
 #endif
-#if ARCH_PORTDUINO
-    if (portduino_config.lora_spi_dev == "ch341" && ch341Hal != nullptr) {
-        ch341Hal->checkError();
-    }
-    if (portduino_status.LoRa_in_error && rebootAtMsec == 0) {
-        LOG_ERROR("LoRa in error detected, attempting to recover");
-        if (portduino_config.lora_spi_dev == "ch341") {
-            if (ch341Hal != nullptr) {
-                delete ch341Hal;
-                ch341Hal = nullptr;
-                sleep(3);
-            }
-            try {
-                ch341Hal = new Ch341Hal(0, portduino_config.lora_usb_serial_num, portduino_config.lora_usb_vid,
-                                        portduino_config.lora_usb_pid);
-            } catch (std::exception &e) {
-                std::cerr << e.what() << std::endl;
-                std::cerr << "Could not initialize CH341 device!" << std::endl;
-                exit(EXIT_FAILURE);
-            }
-        }
-        if (initLoRa()) {
-            router->addInterface(rIf);
-            portduino_status.LoRa_in_error = false;
-        } else {
-            LOG_WARN("Reconfigure failed, rebooting");
-            if (screen) {
-                screen->showSimpleBanner("Rebooting...");
-            }
-            rebootAtMsec = millis() + 25;
-        }
-    }
-#if HAS_TFT
+#if ARCH_PORTDUINO && HAS_TFT
     if (screen && portduino_config.displayPanel == x11 &&
         config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
         auto dispdev = screen->getDisplayDevice();
         if (dispdev)
             static_cast<TFTDisplay *>(dispdev)->sdlLoop();
     }
-#endif
-#endif
-#if HAS_SCREEN && ENABLE_MESSAGE_PERSISTENCE
-    messageStoreAutosaveTick();
 #endif
     long delayMsec = mainController.runOrDelay();
 

src/main.h

@@ -26,8 +26,8 @@ extern NRF52Bluetooth *nrf52Bluetooth;
 #if ARCH_PORTDUINO
 extern HardwareSPI *DisplaySPI;
 extern HardwareSPI *LoraSPI;
-#endif
 
+#endif
 extern ScanI2C::DeviceAddress screen_found;
 extern ScanI2C::DeviceAddress cardkb_found;
 extern uint8_t kb_model;
@@ -42,21 +42,21 @@ extern bool eink_found;
 extern bool pmu_found;
 extern bool isUSBPowered;
 
-#ifdef HAS_DRV2605
+#if defined(T_WATCH_S3) || defined(T_LORA_PAGER)
 #include <Adafruit_DRV2605.h>
 extern Adafruit_DRV2605 drv;
 #endif
 
-#ifdef HAS_PCA9557
-#include <PCA9557.h>
-extern PCA9557 io;
-#endif
-
 #ifdef HAS_I2S
 #include "AudioThread.h"
 extern AudioThread *audioThread;
 #endif
 
+#ifdef ELECROW_ThinkNode_M5
+#include <PCA9557.h>
+extern PCA9557 io;
+#endif
+
 #ifdef HAS_UDP_MULTICAST
 #include "mesh/udp/UdpMulticastHandler.h"
 extern UdpMulticastHandler *udpHandler;
@@ -81,7 +81,6 @@ extern uint32_t timeLastPowered;
 
 extern uint32_t rebootAtMsec;
 extern uint32_t shutdownAtMsec;
-extern bool suppressRebootBanner;
 
 extern uint32_t serialSinceMsec;
 

src/mesh/CryptoEngine.cpp

@@ -61,6 +61,11 @@ bool CryptoEngine::regeneratePublicKey(uint8_t *pubKey, uint8_t *privKey)
     return true;
 }
 #endif
+void CryptoEngine::clearKeys()
+{
+    memset(public_key, 0, sizeof(public_key));
+    memset(private_key, 0, sizeof(private_key));
+}
 
 /**
  * Encrypt a packet's payload using a key generated with Curve25519 and SHA256

src/mesh/CryptoEngine.h

@@ -37,6 +37,7 @@ class CryptoEngine
     virtual bool regeneratePublicKey(uint8_t *pubKey, uint8_t *privKey);
 
 #endif
+    void clearKeys();
     void setDHPrivateKey(uint8_t *_private_key);
     virtual bool encryptCurve25519(uint32_t toNode, uint32_t fromNode, meshtastic_UserLite_public_key_t remotePublic,
                                    uint64_t packetNum, size_t numBytes, const uint8_t *bytes, uint8_t *bytesOut);

src/mesh/Default.h

@@ -13,10 +13,7 @@
 #define min_default_telemetry_interval_secs 30 * 60
 #define default_gps_update_interval IF_ROUTER(ONE_DAY, 2 * 60)
 #define default_telemetry_broadcast_interval_secs IF_ROUTER(ONE_DAY / 2, 60 * 60)
-#define default_broadcast_interval_secs IF_ROUTER(ONE_DAY / 2, 60 * 60)
-#define default_broadcast_smart_minimum_interval_secs 5 * 60
-#define min_default_broadcast_interval_secs 60 * 60
-#define min_default_broadcast_smart_minimum_interval_secs 5 * 60
+#define default_broadcast_interval_secs IF_ROUTER(ONE_DAY / 2, 15 * 60)
 #define default_wait_bluetooth_secs IF_ROUTER(1, 60)
 #define default_sds_secs IF_ROUTER(ONE_DAY, UINT32_MAX) // Default to forever super deep sleep
 #define default_ls_secs IF_ROUTER(ONE_DAY, 5 * 60)

src/mesh/LR11x0Interface.cpp

@@ -186,7 +186,7 @@ template <typename T> bool LR11x0Interface<T>::reconfigure()
     return RADIOLIB_ERR_NONE;
 }
 
-template <typename T> void LR11x0Interface<T>::disableInterrupt()
+template <typename T> void INTERRUPT_ATTR LR11x0Interface<T>::disableInterrupt()
 {
     lora.clearIrqAction();
 }

src/mesh/MeshRadio.h

@@ -23,98 +23,3 @@ extern const RegionInfo regions[];
 extern const RegionInfo *myRegion;
 
 extern void initRegion();
-
-static inline float bwCodeToKHz(uint16_t bwCode)
-{
-    if (bwCode == 31)
-        return 31.25f;
-    if (bwCode == 62)
-        return 62.5f;
-    if (bwCode == 200)
-        return 203.125f;
-    if (bwCode == 400)
-        return 406.25f;
-    if (bwCode == 800)
-        return 812.5f;
-    if (bwCode == 1600)
-        return 1625.0f;
-    return (float)bwCode;
-}
-
-static inline uint16_t bwKHzToCode(float bwKHz)
-{
-    if (bwKHz > 31.24f && bwKHz < 31.26f)
-        return 31;
-    if (bwKHz > 62.49f && bwKHz < 62.51f)
-        return 62;
-    if (bwKHz > 203.12f && bwKHz < 203.13f)
-        return 200;
-    if (bwKHz > 406.24f && bwKHz < 406.26f)
-        return 400;
-    if (bwKHz > 812.49f && bwKHz < 812.51f)
-        return 800;
-    if (bwKHz > 1624.99f && bwKHz < 1625.01f)
-        return 1600;
-    return (uint16_t)(bwKHz + 0.5f);
-}
-
-static inline void modemPresetToParams(meshtastic_Config_LoRaConfig_ModemPreset preset, bool wideLora, float &bwKHz, uint8_t &sf,
-                                       uint8_t &cr)
-{
-    switch (preset) {
-    case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO:
-        bwKHz = wideLora ? 1625.0f : 500.0f;
-        cr = 5;
-        sf = 7;
-        break;
-    case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST:
-        bwKHz = wideLora ? 812.5f : 250.0f;
-        cr = 5;
-        sf = 7;
-        break;
-    case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW:
-        bwKHz = wideLora ? 812.5f : 250.0f;
-        cr = 5;
-        sf = 8;
-        break;
-    case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST:
-        bwKHz = wideLora ? 812.5f : 250.0f;
-        cr = 5;
-        sf = 9;
-        break;
-    case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW:
-        bwKHz = wideLora ? 812.5f : 250.0f;
-        cr = 5;
-        sf = 10;
-        break;
-    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO:
-        bwKHz = wideLora ? 1625.0f : 500.0f;
-        cr = 8;
-        sf = 11;
-        break;
-    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
-        bwKHz = wideLora ? 406.25f : 125.0f;
-        cr = 8;
-        sf = 11;
-        break;
-    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW:
-        bwKHz = wideLora ? 406.25f : 125.0f;
-        cr = 8;
-        sf = 12;
-        break;
-    default: // LONG_FAST (or illegal)
-        bwKHz = wideLora ? 812.5f : 250.0f;
-        cr = 5;
-        sf = 11;
-        break;
-    }
-}
-
-static inline float modemPresetToBwKHz(meshtastic_Config_LoRaConfig_ModemPreset preset, bool wideLora)
-{
-    float bwKHz = 0;
-    uint8_t sf = 0;
-    uint8_t cr = 0;
-    modemPresetToParams(preset, wideLora, bwKHz, sf, cr);
-    return bwKHz;
-}

src/mesh/NodeDB.cpp

@@ -13,7 +13,6 @@
 #include "PacketHistory.h"
 #include "PowerFSM.h"
 #include "RTC.h"
-#include "RadioInterface.h"
 #include "Router.h"
 #include "SPILock.h"
 #include "SafeFile.h"
@@ -27,7 +26,6 @@
 #include <algorithm>
 #include <pb_decode.h>
 #include <pb_encode.h>
-#include <power/PowerHAL.h>
 #include <vector>
 
 #ifdef ARCH_ESP32
@@ -55,7 +53,7 @@
 #endif
 
 #if defined(ARCH_ESP32) && !MESHTASTIC_EXCLUDE_WIFI
-#include <MeshtasticOTA.h>
+#include <WiFiOTA.h>
 #endif
 
 NodeDB *nodeDB = nullptr;
@@ -337,23 +335,6 @@ NodeDB::NodeDB()
         moduleConfig.telemetry.health_update_interval = Default::getConfiguredOrMinimumValue(
             moduleConfig.telemetry.health_update_interval, min_default_telemetry_interval_secs);
     }
-    // Enforce position broadcast minimums if we would send positions over a default channel
-    // Check channels the same way PositionModule::sendOurPosition() does - first channel with position_precision set
-    bool positionUsesDefaultChannel = false;
-    for (uint8_t i = 0; i < channels.getNumChannels(); i++) {
-        if (channels.getByIndex(i).settings.has_module_settings &&
-            channels.getByIndex(i).settings.module_settings.position_precision != 0) {
-            positionUsesDefaultChannel = channels.isDefaultChannel(i);
-            break;
-        }
-    }
-    if (positionUsesDefaultChannel) {
-        LOG_DEBUG("Coerce position broadcasts to min of 1 hour and smart broadcast min of 5 minutes on defaults");
-        config.position.position_broadcast_secs =
-            Default::getConfiguredOrMinimumValue(config.position.position_broadcast_secs, min_default_broadcast_interval_secs);
-        config.position.broadcast_smart_minimum_interval_secs = Default::getConfiguredOrMinimumValue(
-            config.position.broadcast_smart_minimum_interval_secs, min_default_broadcast_smart_minimum_interval_secs);
-    }
     // FIXME: UINT32_MAX intervals overflows Apple clients until they are fully patched
     if (config.device.node_info_broadcast_secs > MAX_INTERVAL)
         config.device.node_info_broadcast_secs = MAX_INTERVAL;
@@ -663,7 +644,7 @@ void NodeDB::installDefaultConfig(bool preserveKey = false)
     config.position.position_broadcast_smart_enabled = true;
 #endif
     config.position.broadcast_smart_minimum_distance = 100;
-    config.position.broadcast_smart_minimum_interval_secs = default_broadcast_smart_minimum_interval_secs;
+    config.position.broadcast_smart_minimum_interval_secs = 30;
     if (config.device.role != meshtastic_Config_DeviceConfig_Role_ROUTER)
         config.device.node_info_broadcast_secs = default_node_info_broadcast_secs;
     config.security.serial_enabled = true;
@@ -758,8 +739,8 @@ void NodeDB::installDefaultConfig(bool preserveKey = false)
     config.display.compass_orientation = COMPASS_ORIENTATION;
 #endif
 #if defined(ARCH_ESP32) && !MESHTASTIC_EXCLUDE_WIFI
-    if (MeshtasticOTA::isUpdated()) {
-        MeshtasticOTA::recoverConfig(&config.network);
+    if (WiFiOTA::isUpdated()) {
+        WiFiOTA::recoverConfig(&config.network);
     }
 #endif
 
@@ -825,7 +806,7 @@ void NodeDB::installDefaultModuleConfig()
     moduleConfig.external_notification.nag_timeout = 2;
 #endif
 #if defined(RAK4630) || defined(RAK11310) || defined(RAK3312) || defined(MUZI_BASE) || defined(ELECROW_ThinkNode_M3) ||          \
-    defined(ELECROW_ThinkNode_M4) || defined(ELECROW_ThinkNode_M6)
+    defined(ELECROW_ThinkNode_M6)
     // Default to PIN_LED2 for external notification output (LED color depends on device variant)
     moduleConfig.external_notification.enabled = true;
     moduleConfig.external_notification.output = PIN_LED2;
@@ -1266,23 +1247,6 @@ void NodeDB::loadFromDisk()
     if ((state != LoadFileResult::LOAD_SUCCESS) || (devicestate.version < DEVICESTATE_MIN_VER)) {
         LOG_WARN("Devicestate %d is old or invalid, discard", devicestate.version);
         installDefaultDeviceState();
-
-        // Attempt recovery of owner fields from our own NodeDB entry if available.
-        meshtastic_NodeInfoLite *us = getMeshNode(getNodeNum());
-        if (us && us->has_user) {
-            LOG_WARN("Restoring owner fields (long_name/short_name/is_licensed/is_unmessagable) from NodeDB for our node 0x%08x",
-                     us->num);
-            memcpy(owner.long_name, us->user.long_name, sizeof(owner.long_name));
-            owner.long_name[sizeof(owner.long_name) - 1] = '\0';
-            memcpy(owner.short_name, us->user.short_name, sizeof(owner.short_name));
-            owner.short_name[sizeof(owner.short_name) - 1] = '\0';
-            owner.is_licensed = us->user.is_licensed;
-            owner.has_is_unmessagable = us->user.has_is_unmessagable;
-            owner.is_unmessagable = us->user.is_unmessagable;
-
-            // Save the recovered owner to device state on disk
-            saveToDisk(SEGMENT_DEVICESTATE);
-        }
     } else {
         LOG_INFO("Loaded saved devicestate version %d", devicestate.version);
     }
@@ -1299,13 +1263,6 @@ void NodeDB::loadFromDisk()
             LOG_INFO("Loaded saved config version %d", config.version);
         }
     }
-
-    // Coerce LoRa config fields derived from presets while bootstrapping.
-    // Some clients/UI components display bandwidth/spread_factor directly from config even in preset mode.
-    if (config.has_lora && config.lora.use_preset) {
-        RadioInterface::bootstrapLoRaConfigFromPreset(config.lora);
-    }
-
     if (backupSecurity.private_key.size > 0) {
         LOG_DEBUG("Restoring backup of security config");
         config.security = backupSecurity;
@@ -1427,14 +1384,6 @@ void NodeDB::loadFromDisk()
 bool NodeDB::saveProto(const char *filename, size_t protoSize, const pb_msgdesc_t *fields, const void *dest_struct,
                        bool fullAtomic)
 {
-
-    // do not try to save anything if power level is not safe. In many cases flash will be lock-protected
-    // and all writes will fail anyway. Device should be sleeping at this point anyway.
-    if (!powerHAL_isPowerLevelSafe()) {
-        LOG_ERROR("Error: trying to saveProto() on unsafe device power level.");
-        return false;
-    }
-
     bool okay = false;
 #ifdef FSCom
     auto f = SafeFile(filename, fullAtomic);
@@ -1461,14 +1410,6 @@ bool NodeDB::saveProto(const char *filename, size_t protoSize, const pb_msgdesc_
 
 bool NodeDB::saveChannelsToDisk()
 {
-
-    // do not try to save anything if power level is not safe. In many cases flash will be lock-protected
-    // and all writes will fail anyway.
-    if (!powerHAL_isPowerLevelSafe()) {
-        LOG_ERROR("Error: trying to saveChannelsToDisk() on unsafe device power level.");
-        return false;
-    }
-
 #ifdef FSCom
     spiLock->lock();
     FSCom.mkdir("/prefs");
@@ -1479,14 +1420,6 @@ bool NodeDB::saveChannelsToDisk()
 
 bool NodeDB::saveDeviceStateToDisk()
 {
-
-    // do not try to save anything if power level is not safe. In many cases flash will be lock-protected
-    // and all writes will fail anyway. Device should be sleeping at this point anyway.
-    if (!powerHAL_isPowerLevelSafe()) {
-        LOG_ERROR("Error: trying to saveDeviceStateToDisk() on unsafe device power level.");
-        return false;
-    }
-
 #ifdef FSCom
     spiLock->lock();
     FSCom.mkdir("/prefs");
@@ -1499,14 +1432,6 @@ bool NodeDB::saveDeviceStateToDisk()
 
 bool NodeDB::saveNodeDatabaseToDisk()
 {
-
-    // do not try to save anything if power level is not safe. In many cases flash will be lock-protected
-    // and all writes will fail anyway. Device should be sleeping at this point anyway.
-    if (!powerHAL_isPowerLevelSafe()) {
-        LOG_ERROR("Error: trying to saveNodeDatabaseToDisk() on unsafe device power level.");
-        return false;
-    }
-
 #ifdef FSCom
     spiLock->lock();
     FSCom.mkdir("/prefs");
@@ -1519,14 +1444,6 @@ bool NodeDB::saveNodeDatabaseToDisk()
 
 bool NodeDB::saveToDiskNoRetry(int saveWhat)
 {
-
-    // do not try to save anything if power level is not safe. In many cases flash will be lock-protected
-    // and all writes will fail anyway. Device should be sleeping at this point anyway.
-    if (!powerHAL_isPowerLevelSafe()) {
-        LOG_ERROR("Error: trying to saveToDiskNoRetry() on unsafe device power level.");
-        return false;
-    }
-
     bool success = true;
 #ifdef FSCom
     spiLock->lock();
@@ -1582,14 +1499,6 @@ bool NodeDB::saveToDiskNoRetry(int saveWhat)
 bool NodeDB::saveToDisk(int saveWhat)
 {
     LOG_DEBUG("Save to disk %d", saveWhat);
-
-    // do not try to save anything if power level is not safe. In many cases flash will be lock-protected
-    // and all writes will fail anyway. Device should be sleeping at this point anyway.
-    if (!powerHAL_isPowerLevelSafe()) {
-        LOG_ERROR("Error: trying to saveToDisk() on unsafe device power level.");
-        return false;
-    }
-
     bool success = saveToDiskNoRetry(saveWhat);
 
     if (!success) {
@@ -2247,10 +2156,7 @@ void recordCriticalError(meshtastic_CriticalErrorCode code, uint32_t address, co
 
     // Currently portuino is mostly used for simulation.  Make sure the user notices something really bad happened
 #ifdef ARCH_PORTDUINO
-    LOG_ERROR("A critical failure occurred");
-    // TODO: Determine if other critical errors should also cause an immediate exit
-    if (code == meshtastic_CriticalErrorCode_FLASH_CORRUPTION_RECOVERABLE ||
-        code == meshtastic_CriticalErrorCode_FLASH_CORRUPTION_UNRECOVERABLE)
-        exit(2);
+    LOG_ERROR("A critical failure occurred, portduino is exiting");
+    exit(2);
 #endif
 }

src/mesh/NodeDB.h

@@ -378,8 +378,6 @@ extern meshtastic_CriticalErrorCode error_code;
 extern uint32_t error_address;
 #define NODEINFO_BITFIELD_IS_KEY_MANUALLY_VERIFIED_SHIFT 0
 #define NODEINFO_BITFIELD_IS_KEY_MANUALLY_VERIFIED_MASK (1 << NODEINFO_BITFIELD_IS_KEY_MANUALLY_VERIFIED_SHIFT)
-#define NODEINFO_BITFIELD_IS_MUTED_SHIFT 1
-#define NODEINFO_BITFIELD_IS_MUTED_MASK (1 << NODEINFO_BITFIELD_IS_MUTED_SHIFT)
 
 #define Module_Config_size                                                                                                       \
     (ModuleConfig_CannedMessageConfig_size + ModuleConfig_ExternalNotificationConfig_size + ModuleConfig_MQTTConfig_size +       \

src/mesh/RF95Interface.cpp

@@ -193,7 +193,7 @@ bool RF95Interface::init()
     return res == RADIOLIB_ERR_NONE;
 }
 
-void RF95Interface::disableInterrupt()
+void INTERRUPT_ATTR RF95Interface::disableInterrupt()
 {
     lora->clearDio0Action();
 }

src/mesh/RadioInterface.cpp

@@ -1,36 +1,17 @@
 #include "RadioInterface.h"
 #include "Channels.h"
 #include "DisplayFormatters.h"
-#include "LLCC68Interface.h"
-#include "LR1110Interface.h"
-#include "LR1120Interface.h"
-#include "LR1121Interface.h"
 #include "MeshRadio.h"
 #include "MeshService.h"
 #include "NodeDB.h"
-#include "RF95Interface.h"
 #include "Router.h"
-#include "SX1262Interface.h"
-#include "SX1268Interface.h"
-#include "SX1280Interface.h"
 #include "configuration.h"
-#include "detect/LoRaRadioType.h"
 #include "main.h"
 #include "sleep.h"
 #include <assert.h>
 #include <pb_decode.h>
 #include <pb_encode.h>
 
-#ifdef ARCH_PORTDUINO
-#include "platform/portduino/PortduinoGlue.h"
-#include "platform/portduino/SimRadio.h"
-#include "platform/portduino/USBHal.h"
-#endif
-
-#ifdef ARCH_STM32WL>
-#include "STM32WLE5JCInterface.h"
-#endif
-
 // Calculate 2^n without calling pow()
 uint32_t pow_of_2(uint32_t n)
 {
@@ -224,281 +205,6 @@ bool RadioInterface::uses_default_frequency_slot = true;
 
 static uint8_t bytes[MAX_LORA_PAYLOAD_LEN + 1];
 
-// Global LoRa radio type
-LoRaRadioType radioType = NO_RADIO;
-
-extern RadioInterface *rIf;
-extern RadioLibHal *RadioLibHAL;
-#if defined(HW_SPI1_DEVICE) && defined(ARCH_ESP32)
-extern SPIClass SPI1;
-#endif
-
-bool initLoRa()
-{
-    if (rIf != nullptr) {
-        delete rIf;
-        rIf = nullptr;
-    }
-
-#if ARCH_PORTDUINO
-    SPISettings spiSettings(portduino_config.spiSpeed, MSBFIRST, SPI_MODE0);
-#else
-    SPISettings spiSettings(4000000, MSBFIRST, SPI_MODE0);
-#endif
-
-#ifdef ARCH_PORTDUINO
-    // as one can't use a function pointer to the class constructor:
-    auto loraModuleInterface = [](LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst,
-                                  RADIOLIB_PIN_TYPE busy) {
-        switch (portduino_config.lora_module) {
-        case use_rf95:
-            return (RadioInterface *)new RF95Interface(hal, cs, irq, rst, busy);
-        case use_sx1262:
-            return (RadioInterface *)new SX1262Interface(hal, cs, irq, rst, busy);
-        case use_sx1268:
-            return (RadioInterface *)new SX1268Interface(hal, cs, irq, rst, busy);
-        case use_sx1280:
-            return (RadioInterface *)new SX1280Interface(hal, cs, irq, rst, busy);
-        case use_lr1110:
-            return (RadioInterface *)new LR1110Interface(hal, cs, irq, rst, busy);
-        case use_lr1120:
-            return (RadioInterface *)new LR1120Interface(hal, cs, irq, rst, busy);
-        case use_lr1121:
-            return (RadioInterface *)new LR1121Interface(hal, cs, irq, rst, busy);
-        case use_llcc68:
-            return (RadioInterface *)new LLCC68Interface(hal, cs, irq, rst, busy);
-        case use_simradio:
-            return (RadioInterface *)new SimRadio;
-        default:
-            assert(0); // shouldn't happen
-            return (RadioInterface *)nullptr;
-        }
-    };
-
-    LOG_DEBUG("Activate %s radio on SPI port %s", portduino_config.loraModules[portduino_config.lora_module].c_str(),
-              portduino_config.lora_spi_dev.c_str());
-    if (portduino_config.lora_spi_dev == "ch341") {
-        RadioLibHAL = ch341Hal;
-    } else {
-        if (RadioLibHAL != nullptr) {
-            delete RadioLibHAL;
-            RadioLibHAL = nullptr;
-        }
-        RadioLibHAL = new LockingArduinoHal(SPI, spiSettings);
-    }
-    rIf =
-        loraModuleInterface((LockingArduinoHal *)RadioLibHAL, portduino_config.lora_cs_pin.pin, portduino_config.lora_irq_pin.pin,
-                            portduino_config.lora_reset_pin.pin, portduino_config.lora_busy_pin.pin);
-
-    if (!rIf->init()) {
-        LOG_WARN("No %s radio", portduino_config.loraModules[portduino_config.lora_module].c_str());
-        delete rIf;
-        rIf = NULL;
-        exit(EXIT_FAILURE);
-    } else {
-        LOG_INFO("%s init success", portduino_config.loraModules[portduino_config.lora_module].c_str());
-    }
-
-#elif defined(HW_SPI1_DEVICE)
-    LockingArduinoHal *RadioLibHAL = new LockingArduinoHal(SPI1, spiSettings);
-#else // HW_SPI1_DEVICE
-    LockingArduinoHal *RadioLibHAL = new LockingArduinoHal(SPI, spiSettings);
-#endif
-
-// radio init MUST BE AFTER service.init, so we have our radio config settings (from nodedb init)
-#if defined(USE_STM32WLx)
-    if (!rIf) {
-        rIf = new STM32WLE5JCInterface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
-        if (!rIf->init()) {
-            LOG_WARN("No STM32WL radio");
-            delete rIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("STM32WL init success");
-            radioType = STM32WLx_RADIO;
-        }
-    }
-#endif
-
-#if defined(RF95_IRQ) && RADIOLIB_EXCLUDE_SX127X != 1
-    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
-        rIf = new RF95Interface(RadioLibHAL, LORA_CS, RF95_IRQ, RF95_RESET, RF95_DIO1);
-        if (!rIf->init()) {
-            LOG_WARN("No RF95 radio");
-            delete rIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("RF95 init success");
-            radioType = RF95_RADIO;
-        }
-    }
-#endif
-
-#if defined(USE_SX1262) && !defined(ARCH_PORTDUINO) && !defined(TCXO_OPTIONAL) && RADIOLIB_EXCLUDE_SX126X != 1
-    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
-        auto *sxIf = new SX1262Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
-#ifdef SX126X_DIO3_TCXO_VOLTAGE
-        sxIf->setTCXOVoltage(SX126X_DIO3_TCXO_VOLTAGE);
-#endif
-        if (!sxIf->init()) {
-            LOG_WARN("No SX1262 radio");
-            delete sxIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("SX1262 init success");
-            rIf = sxIf;
-            radioType = SX1262_RADIO;
-        }
-    }
-#endif
-
-#if defined(USE_SX1262) && !defined(ARCH_PORTDUINO) && defined(TCXO_OPTIONAL)
-    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
-        // try using the specified TCXO voltage
-        auto *sxIf = new SX1262Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
-        sxIf->setTCXOVoltage(SX126X_DIO3_TCXO_VOLTAGE);
-        if (!sxIf->init()) {
-            LOG_WARN("No SX1262 radio with TCXO, Vref %fV", SX126X_DIO3_TCXO_VOLTAGE);
-            delete sxIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("SX1262 init success, TCXO, Vref %fV", SX126X_DIO3_TCXO_VOLTAGE);
-            rIf = sxIf;
-            radioType = SX1262_RADIO;
-        }
-    }
-
-    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
-        // If specified TCXO voltage fails, attempt to use DIO3 as a reference instead
-        rIf = new SX1262Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
-        if (!rIf->init()) {
-            LOG_WARN("No SX1262 radio with XTAL, Vref 0.0V");
-            delete rIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("SX1262 init success, XTAL, Vref 0.0V");
-            radioType = SX1262_RADIO;
-        }
-    }
-#endif
-
-#if defined(USE_SX1268)
-#if defined(SX126X_DIO3_TCXO_VOLTAGE) && defined(TCXO_OPTIONAL)
-    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
-        // try using the specified TCXO voltage
-        auto *sxIf = new SX1268Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
-        sxIf->setTCXOVoltage(SX126X_DIO3_TCXO_VOLTAGE);
-        if (!sxIf->init()) {
-            LOG_WARN("No SX1268 radio with TCXO, Vref %fV", SX126X_DIO3_TCXO_VOLTAGE);
-            delete sxIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("SX1268 init success, TCXO, Vref %fV", SX126X_DIO3_TCXO_VOLTAGE);
-            rIf = sxIf;
-            radioType = SX1268_RADIO;
-        }
-    }
-#endif
-    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
-        rIf = new SX1268Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
-        if (!rIf->init()) {
-            LOG_WARN("No SX1268 radio");
-            delete rIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("SX1268 init success");
-            radioType = SX1268_RADIO;
-        }
-    }
-#endif
-
-#if defined(USE_LLCC68)
-    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
-        rIf = new LLCC68Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
-        if (!rIf->init()) {
-            LOG_WARN("No LLCC68 radio");
-            delete rIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("LLCC68 init success");
-            radioType = LLCC68_RADIO;
-        }
-    }
-#endif
-
-#if defined(USE_LR1110) && RADIOLIB_EXCLUDE_LR11X0 != 1
-    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
-        rIf = new LR1110Interface(RadioLibHAL, LR1110_SPI_NSS_PIN, LR1110_IRQ_PIN, LR1110_NRESET_PIN, LR1110_BUSY_PIN);
-        if (!rIf->init()) {
-            LOG_WARN("No LR1110 radio");
-            delete rIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("LR1110 init success");
-            radioType = LR1110_RADIO;
-        }
-    }
-#endif
-
-#if defined(USE_LR1120) && RADIOLIB_EXCLUDE_LR11X0 != 1
-    if (!rIf) {
-        rIf = new LR1120Interface(RadioLibHAL, LR1120_SPI_NSS_PIN, LR1120_IRQ_PIN, LR1120_NRESET_PIN, LR1120_BUSY_PIN);
-        if (!rIf->init()) {
-            LOG_WARN("No LR1120 radio");
-            delete rIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("LR1120 init success");
-            radioType = LR1120_RADIO;
-        }
-    }
-#endif
-
-#if defined(USE_LR1121) && RADIOLIB_EXCLUDE_LR11X0 != 1
-    if (!rIf) {
-        rIf = new LR1121Interface(RadioLibHAL, LR1121_SPI_NSS_PIN, LR1121_IRQ_PIN, LR1121_NRESET_PIN, LR1121_BUSY_PIN);
-        if (!rIf->init()) {
-            LOG_WARN("No LR1121 radio");
-            delete rIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("LR1121 init success");
-            radioType = LR1121_RADIO;
-        }
-    }
-#endif
-
-#if defined(USE_SX1280) && RADIOLIB_EXCLUDE_SX128X != 1
-    if (!rIf) {
-        rIf = new SX1280Interface(RadioLibHAL, SX128X_CS, SX128X_DIO1, SX128X_RESET, SX128X_BUSY);
-        if (!rIf->init()) {
-            LOG_WARN("No SX1280 radio");
-            delete rIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("SX1280 init success");
-            radioType = SX1280_RADIO;
-        }
-    }
-#endif
-
-    // check if the radio chip matches the selected region
-    if ((config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_LORA_24) && rIf && (!rIf->wideLora())) {
-        LOG_WARN("LoRa chip does not support 2.4GHz. Revert to unset");
-        config.lora.region = meshtastic_Config_LoRaConfig_RegionCode_UNSET;
-        nodeDB->saveToDisk(SEGMENT_CONFIG);
-
-        if (rIf && !rIf->reconfigure()) {
-            LOG_WARN("Reconfigure failed, rebooting");
-            if (screen) {
-                screen->showSimpleBanner("Rebooting...");
-            }
-            rebootAtMsec = millis() + 5000;
-        }
-    }
-    return rIf != nullptr;
-}
-
 void initRegion()
 {
     const RegionInfo *r = regions;
@@ -514,34 +220,6 @@ void initRegion()
     myRegion = r;
 }
 
-void RadioInterface::bootstrapLoRaConfigFromPreset(meshtastic_Config_LoRaConfig &loraConfig)
-{
-    if (!loraConfig.use_preset) {
-        return;
-    }
-
-    // Find region info to determine whether "wide" LoRa is permitted (2.4 GHz uses wider bandwidth codes).
-    const RegionInfo *r = regions;
-    for (; r->code != meshtastic_Config_LoRaConfig_RegionCode_UNSET && r->code != loraConfig.region; r++)
-        ;
-
-    const bool regionWideLora = r->wideLora;
-
-    float bwKHz = 0;
-    uint8_t sf = 0;
-    uint8_t cr = 0;
-    modemPresetToParams(loraConfig.modem_preset, regionWideLora, bwKHz, sf, cr);
-
-    // If selected preset requests a bandwidth larger than the region span, fall back to LONG_FAST.
-    if (r->code != meshtastic_Config_LoRaConfig_RegionCode_UNSET && (r->freqEnd - r->freqStart) < (bwKHz / 1000.0f)) {
-        loraConfig.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST;
-        modemPresetToParams(loraConfig.modem_preset, regionWideLora, bwKHz, sf, cr);
-    }
-
-    loraConfig.bandwidth = bwKHzToCode(bwKHz);
-    loraConfig.spread_factor = sf;
-}
-
 /**
  * ## LoRaWAN for North America
 
@@ -568,9 +246,8 @@ uint32_t RadioInterface::getPacketTime(const meshtastic_MeshPacket *p, bool rece
 /** The delay to use for retransmitting dropped packets */
 uint32_t RadioInterface::getRetransmissionMsec(const meshtastic_MeshPacket *p)
 {
-    size_t numbytes = p->which_payload_variant == meshtastic_MeshPacket_decoded_tag
-                          ? pb_encode_to_bytes(bytes, sizeof(bytes), &meshtastic_Data_msg, &p->decoded)
-                          : p->encrypted.size + MESHTASTIC_HEADER_LENGTH;
+    size_t numbytes =p->which_payload_variant == meshtastic_MeshPacket_decoded_tag ? 
+      pb_encode_to_bytes(bytes, sizeof(bytes), &meshtastic_Data_msg, &p->decoded) : p->encrypted.size+MESHTASTIC_HEADER_LENGTH;
     uint32_t packetAirtime = getPacketTime(numbytes + sizeof(PacketHeader));
     // Make sure enough time has elapsed for this packet to be sent and an ACK is received.
     // LOG_DEBUG("Waiting for flooding message with airtime %d and slotTime is %d", packetAirtime, slotTimeMsec);
@@ -796,7 +473,54 @@ void RadioInterface::applyModemConfig()
     bool validConfig = false; // We need to check for a valid configuration
     while (!validConfig) {
         if (loraConfig.use_preset) {
-            modemPresetToParams(loraConfig.modem_preset, myRegion->wideLora, bw, sf, cr);
+
+            switch (loraConfig.modem_preset) {
+            case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO:
+                bw = (myRegion->wideLora) ? 1625.0 : 500;
+                cr = 5;
+                sf = 7;
+                break;
+            case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST:
+                bw = (myRegion->wideLora) ? 812.5 : 250;
+                cr = 5;
+                sf = 7;
+                break;
+            case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW:
+                bw = (myRegion->wideLora) ? 812.5 : 250;
+                cr = 5;
+                sf = 8;
+                break;
+            case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST:
+                bw = (myRegion->wideLora) ? 812.5 : 250;
+                cr = 5;
+                sf = 9;
+                break;
+            case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW:
+                bw = (myRegion->wideLora) ? 812.5 : 250;
+                cr = 5;
+                sf = 10;
+                break;
+            case meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO:
+                bw = (myRegion->wideLora) ? 1625.0 : 500;
+                cr = 8;
+                sf = 11;
+                break;
+            default: // Config_LoRaConfig_ModemPreset_LONG_FAST is default. Gracefully use this is preset is something illegal.
+                bw = (myRegion->wideLora) ? 812.5 : 250;
+                cr = 5;
+                sf = 11;
+                break;
+            case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
+                bw = (myRegion->wideLora) ? 406.25 : 125;
+                cr = 8;
+                sf = 11;
+                break;
+            case meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW:
+                bw = (myRegion->wideLora) ? 406.25 : 125;
+                cr = 8;
+                sf = 12;
+                break;
+            }
             if (loraConfig.coding_rate >= 5 && loraConfig.coding_rate <= 8 && loraConfig.coding_rate != cr) {
                 cr = loraConfig.coding_rate;
                 LOG_INFO("Using custom Coding Rate %u", cr);
@@ -804,7 +528,20 @@ void RadioInterface::applyModemConfig()
         } else {
             sf = loraConfig.spread_factor;
             cr = loraConfig.coding_rate;
-            bw = bwCodeToKHz(loraConfig.bandwidth);
+            bw = loraConfig.bandwidth;
+
+            if (bw == 31) // This parameter is not an integer
+                bw = 31.25;
+            if (bw == 62) // Fix for 62.5Khz bandwidth
+                bw = 62.5;
+            if (bw == 200)
+                bw = 203.125;
+            if (bw == 400)
+                bw = 406.25;
+            if (bw == 800)
+                bw = 812.5;
+            if (bw == 1600)
+                bw = 1625.0;
         }
 
         if ((myRegion->freqEnd - myRegion->freqStart) < bw / 1000) {
@@ -928,24 +665,18 @@ void RadioInterface::limitPower(int8_t loraMaxPower)
         power = maxPower;
     }
 
-#ifdef ARCH_PORTDUINO
-    size_t num_pa_points = portduino_config.num_pa_points;
-    const uint16_t *tx_gain = portduino_config.tx_gain_lora;
+#ifndef NUM_PA_POINTS
+    if (TX_GAIN_LORA > 0 && !devicestate.owner.is_licensed) {
+        LOG_INFO("Requested Tx power: %d dBm; Device LoRa Tx gain: %d dB", power, TX_GAIN_LORA);
+        power -= TX_GAIN_LORA;
+    }
 #else
-    size_t num_pa_points = NUM_PA_POINTS;
-    const uint16_t tx_gain[NUM_PA_POINTS] = {TX_GAIN_LORA};
-#endif
-
-    if (num_pa_points == 1) {
-        if (tx_gain[0] > 0 && !devicestate.owner.is_licensed) {
-            LOG_INFO("Requested Tx power: %d dBm; Device LoRa Tx gain: %d dB", power, tx_gain[0]);
-            power -= tx_gain[0];
-        }
-    } else if (!devicestate.owner.is_licensed) {
+    if (!devicestate.owner.is_licensed) {
         // we have an array of PA gain values.  Find the highest power setting that works.
-        for (int radio_dbm = 0; radio_dbm < num_pa_points; radio_dbm++) {
+        const uint16_t tx_gain[NUM_PA_POINTS] = {TX_GAIN_LORA};
+        for (int radio_dbm = 0; radio_dbm < NUM_PA_POINTS; radio_dbm++) {
             if (((radio_dbm + tx_gain[radio_dbm]) > power) ||
-                ((radio_dbm == (num_pa_points - 1)) && ((radio_dbm + tx_gain[radio_dbm]) <= power))) {
+                ((radio_dbm == (NUM_PA_POINTS - 1)) && ((radio_dbm + tx_gain[radio_dbm]) <= power))) {
                 // we've exceeded the power limit, or hit the max we can do
                 LOG_INFO("Requested Tx power: %d dBm; Device LoRa Tx gain: %d dB", power, tx_gain[radio_dbm]);
                 power -= tx_gain[radio_dbm];
@@ -953,7 +684,7 @@ void RadioInterface::limitPower(int8_t loraMaxPower)
             }
         }
     }
-
+#endif
     if (power > loraMaxPower) // Clamp power to maximum defined level
         power = loraMaxPower;
 

src/mesh/RadioInterface.h

@@ -7,9 +7,6 @@
 #include "airtime.h"
 #include "error.h"
 
-// Forward decl to avoid a direct include of generated config headers / full LoRaConfig definition in this widely-included file.
-typedef struct _meshtastic_Config_LoRaConfig meshtastic_Config_LoRaConfig;
-
 #define MAX_TX_QUEUE 16 // max number of packets which can be waiting for transmission
 
 #define MAX_LORA_PAYLOAD_LEN 255 // max length of 255 per Semtech's datasheets on SX12xx
@@ -118,12 +115,6 @@ class RadioInterface
 
     virtual ~RadioInterface() {}
 
-    /**
-     * Coerce LoRa config fields (bandwidth/spread_factor) derived from presets.
-     * This is used during early bootstrapping so UIs that display these fields directly remain consistent.
-     */
-    static void bootstrapLoRaConfigFromPreset(meshtastic_Config_LoRaConfig &loraConfig);
-
     /**
      * Return true if we think the board can go to sleep (i.e. our tx queue is empty, we are not sending or receiving)
      *
@@ -279,7 +270,5 @@ class RadioInterface
     }
 };
 
-bool initLoRa();
-
 /// Debug printing for packets
 void printPacket(const char *prefix, const meshtastic_MeshPacket *p);

src/mesh/Router.cpp

@@ -7,6 +7,7 @@
 #include "RTC.h"
 
 #include "configuration.h"
+#include "detect/LoRaRadioType.h"
 #include "main.h"
 #include "mesh-pb-constants.h"
 #include "meshUtils.h"

src/mesh/SX126xInterface.cpp

@@ -256,7 +256,7 @@ template <typename T> bool SX126xInterface<T>::reconfigure()
     return RADIOLIB_ERR_NONE;
 }
 
-template <typename T> void SX126xInterface<T>::disableInterrupt()
+template <typename T> void INTERRUPT_ATTR SX126xInterface<T>::disableInterrupt()
 {
     lora.clearDio1Action();
 }
@@ -269,12 +269,8 @@ template <typename T> void SX126xInterface<T>::setStandby()
 
     if (err != RADIOLIB_ERR_NONE)
         LOG_DEBUG("SX126x standby %s%d", radioLibErr, err);
-#ifdef ARCH_PORTDUINO
-    if (err != RADIOLIB_ERR_NONE)
-        portduino_status.LoRa_in_error = true;
-#else
     assert(err == RADIOLIB_ERR_NONE);
-#endif
+
     isReceiving = false; // If we were receiving, not any more
     activeReceiveStart = 0;
     disableInterrupt();
@@ -317,12 +313,7 @@ template <typename T> void SX126xInterface<T>::startReceive()
     int err = lora.startReceiveDutyCycleAuto(preambleLength, 8, MESHTASTIC_RADIOLIB_IRQ_RX_FLAGS);
     if (err != RADIOLIB_ERR_NONE)
         LOG_ERROR("SX126X startReceiveDutyCycleAuto %s%d", radioLibErr, err);
-#ifdef ARCH_PORTDUINO
-    if (err != RADIOLIB_ERR_NONE)
-        portduino_status.LoRa_in_error = true;
-#else
     assert(err == RADIOLIB_ERR_NONE);
-#endif
 
     RadioLibInterface::startReceive();
 
@@ -350,12 +341,7 @@ template <typename T> bool SX126xInterface<T>::isChannelActive()
         return true;
     if (result != RADIOLIB_CHANNEL_FREE)
         LOG_ERROR("SX126X scanChannel %s%d", radioLibErr, result);
-#ifdef ARCH_PORTDUINO
-    if (result == RADIOLIB_ERR_WRONG_MODEM)
-        portduino_status.LoRa_in_error = true;
-#else
     assert(result != RADIOLIB_ERR_WRONG_MODEM);
-#endif
 
     return false;
 }
@@ -403,9 +389,9 @@ template <typename T> bool SX126xInterface<T>::sleep()
 template <typename T> void SX126xInterface<T>::setTransmitEnable(bool txon)
 {
 #if defined(USE_GC1109_PA)
-    digitalWrite(LORA_PA_POWER, HIGH);         // Ensure LDO is on
-    digitalWrite(LORA_PA_EN, HIGH);            // CSD=1: Chip enabled
-    digitalWrite(LORA_PA_TX_EN, txon ? 1 : 0); // CPS: 1=full PA, 0=bypass (for RX, CPS is don't care)
+    digitalWrite(LORA_PA_POWER, HIGH);  // Ensure LDO is on
+    digitalWrite(LORA_PA_EN, HIGH);     // CSD=1: Chip enabled
+    digitalWrite(LORA_PA_TX_EN, txon ? 1 : 0);  // CPS: 1=full PA, 0=bypass (for RX, CPS is don't care)
 #endif
 }
 

src/mesh/SX128xInterface.cpp

@@ -155,7 +155,7 @@ template <typename T> bool SX128xInterface<T>::reconfigure()
     return RADIOLIB_ERR_NONE;
 }
 
-template <typename T> void SX128xInterface<T>::disableInterrupt()
+template <typename T> void INTERRUPT_ATTR SX128xInterface<T>::disableInterrupt()
 {
     lora.clearDio1Action();
 }

src/mesh/TypeConversions.cpp

@@ -14,7 +14,6 @@ meshtastic_NodeInfo TypeConversions::ConvertToNodeInfo(const meshtastic_NodeInfo
     info.is_favorite = lite->is_favorite;
     info.is_ignored = lite->is_ignored;
     info.is_key_manually_verified = lite->bitfield & NODEINFO_BITFIELD_IS_KEY_MANUALLY_VERIFIED_MASK;
-    info.is_muted = lite->bitfield & NODEINFO_BITFIELD_IS_MUTED_MASK;
 
     if (lite->has_hops_away) {
         info.has_hops_away = true;

src/mesh/eth/ethClient.cpp

@@ -21,7 +21,7 @@ uint32_t ntp_renew = 0;
 #endif
 
 EthernetUDP syslogClient;
-meshtastic::Syslog syslog(syslogClient);
+Syslog syslog(syslogClient);
 
 bool ethStartupComplete = 0;
 

src/mesh/generated/meshtastic/admin.pb.cpp

@@ -12,9 +12,6 @@ PB_BIND(meshtastic_AdminMessage, meshtastic_AdminMessage, 2)
 PB_BIND(meshtastic_AdminMessage_InputEvent, meshtastic_AdminMessage_InputEvent, AUTO)
 
 
-PB_BIND(meshtastic_AdminMessage_OTAEvent, meshtastic_AdminMessage_OTAEvent, AUTO)
-
-
 PB_BIND(meshtastic_HamParameters, meshtastic_HamParameters, AUTO)
 
 

src/mesh/generated/meshtastic/admin.pb.h

@@ -77,9 +77,7 @@ typedef enum _meshtastic_AdminMessage_ModuleConfigType {
     /* TODO: REPLACE */
     meshtastic_AdminMessage_ModuleConfigType_DETECTIONSENSOR_CONFIG = 11,
     /* TODO: REPLACE */
-    meshtastic_AdminMessage_ModuleConfigType_PAXCOUNTER_CONFIG = 12,
-    /* TODO: REPLACE */
-    meshtastic_AdminMessage_ModuleConfigType_STATUSMESSAGE_CONFIG = 13
+    meshtastic_AdminMessage_ModuleConfigType_PAXCOUNTER_CONFIG = 12
 } meshtastic_AdminMessage_ModuleConfigType;
 
 typedef enum _meshtastic_AdminMessage_BackupLocation {
@@ -115,17 +113,6 @@ typedef struct _meshtastic_AdminMessage_InputEvent {
     uint16_t touch_y;
 } meshtastic_AdminMessage_InputEvent;
 
-typedef PB_BYTES_ARRAY_T(32) meshtastic_AdminMessage_OTAEvent_ota_hash_t;
-/* User is requesting an over the air update.
- Node will reboot into the OTA loader */
-typedef struct _meshtastic_AdminMessage_OTAEvent {
-    /* Tell the node to reboot into OTA mode for firmware update via BLE or WiFi (ESP32 only for now) */
-    meshtastic_OTAMode reboot_ota_mode;
-    /* A 32 byte hash of the OTA firmware.
- Used to verify the integrity of the firmware before applying an update. */
-    meshtastic_AdminMessage_OTAEvent_ota_hash_t ota_hash;
-} meshtastic_AdminMessage_OTAEvent;
-
 /* Parameters for setting up Meshtastic for ameteur radio usage */
 typedef struct _meshtastic_HamParameters {
     /* Amateur radio call sign, eg. KD2ABC */
@@ -272,8 +259,6 @@ typedef struct _meshtastic_AdminMessage {
         uint32_t set_ignored_node;
         /* Set specified node-num to be un-ignored on the NodeDB on the device */
         uint32_t remove_ignored_node;
-        /* Set specified node-num to be muted */
-        uint32_t toggle_muted_node;
         /* Begins an edit transaction for config, module config, owner, and channel settings changes
      This will delay the standard *implicit* save to the file system and subsequent reboot behavior until committed (commit_edit_settings) */
         bool begin_edit_settings;
@@ -283,6 +268,8 @@ typedef struct _meshtastic_AdminMessage {
         meshtastic_SharedContact add_contact;
         /* Initiate or respond to a key verification request */
         meshtastic_KeyVerificationAdmin key_verification;
+        /* Tell the node to reboot into OTA mode for firmware update via BLE or WiFi (ESP32 only for now) */
+        meshtastic_OTAMode reboot_ota_mode;
         /* Tell the node to factory reset config everything; all device state and configuration will be returned to factory defaults and BLE bonds will be cleared. */
         int32_t factory_reset_device;
         /* Tell the node to reboot into the OTA Firmware in this many seconds (or <0 to cancel reboot)
@@ -301,8 +288,6 @@ typedef struct _meshtastic_AdminMessage {
         /* Tell the node to reset the nodedb.
      When true, favorites are preserved through reset. */
         bool nodedb_reset;
-        /* Tell the node to reset into the OTA Loader */
-        meshtastic_AdminMessage_OTAEvent ota_request;
     };
     /* The node generates this key and sends it with any get_x_response packets.
  The client MUST include the same key with any set_x commands. Key expires after 300 seconds.
@@ -325,8 +310,8 @@ extern "C" {
 #define _meshtastic_AdminMessage_ConfigType_ARRAYSIZE ((meshtastic_AdminMessage_ConfigType)(meshtastic_AdminMessage_ConfigType_DEVICEUI_CONFIG+1))
 
 #define _meshtastic_AdminMessage_ModuleConfigType_MIN meshtastic_AdminMessage_ModuleConfigType_MQTT_CONFIG
-#define _meshtastic_AdminMessage_ModuleConfigType_MAX meshtastic_AdminMessage_ModuleConfigType_STATUSMESSAGE_CONFIG
-#define _meshtastic_AdminMessage_ModuleConfigType_ARRAYSIZE ((meshtastic_AdminMessage_ModuleConfigType)(meshtastic_AdminMessage_ModuleConfigType_STATUSMESSAGE_CONFIG+1))
+#define _meshtastic_AdminMessage_ModuleConfigType_MAX meshtastic_AdminMessage_ModuleConfigType_PAXCOUNTER_CONFIG
+#define _meshtastic_AdminMessage_ModuleConfigType_ARRAYSIZE ((meshtastic_AdminMessage_ModuleConfigType)(meshtastic_AdminMessage_ModuleConfigType_PAXCOUNTER_CONFIG+1))
 
 #define _meshtastic_AdminMessage_BackupLocation_MIN meshtastic_AdminMessage_BackupLocation_FLASH
 #define _meshtastic_AdminMessage_BackupLocation_MAX meshtastic_AdminMessage_BackupLocation_SD
@@ -341,10 +326,9 @@ extern "C" {
 #define meshtastic_AdminMessage_payload_variant_backup_preferences_ENUMTYPE meshtastic_AdminMessage_BackupLocation
 #define meshtastic_AdminMessage_payload_variant_restore_preferences_ENUMTYPE meshtastic_AdminMessage_BackupLocation
 #define meshtastic_AdminMessage_payload_variant_remove_backup_preferences_ENUMTYPE meshtastic_AdminMessage_BackupLocation
+#define meshtastic_AdminMessage_payload_variant_reboot_ota_mode_ENUMTYPE meshtastic_OTAMode
 
 
-#define meshtastic_AdminMessage_OTAEvent_reboot_ota_mode_ENUMTYPE meshtastic_OTAMode
-
 
 
 
@@ -354,14 +338,12 @@ extern "C" {
 /* Initializer values for message structs */
 #define meshtastic_AdminMessage_init_default     {0, {0}, {0, {0}}}
 #define meshtastic_AdminMessage_InputEvent_init_default {0, 0, 0, 0}
-#define meshtastic_AdminMessage_OTAEvent_init_default {_meshtastic_OTAMode_MIN, {0, {0}}}
 #define meshtastic_HamParameters_init_default    {"", 0, 0, ""}
 #define meshtastic_NodeRemoteHardwarePinsResponse_init_default {0, {meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default}}
 #define meshtastic_SharedContact_init_default    {0, false, meshtastic_User_init_default, 0, 0}
 #define meshtastic_KeyVerificationAdmin_init_default {_meshtastic_KeyVerificationAdmin_MessageType_MIN, 0, 0, false, 0}
 #define meshtastic_AdminMessage_init_zero        {0, {0}, {0, {0}}}
 #define meshtastic_AdminMessage_InputEvent_init_zero {0, 0, 0, 0}
-#define meshtastic_AdminMessage_OTAEvent_init_zero {_meshtastic_OTAMode_MIN, {0, {0}}}
 #define meshtastic_HamParameters_init_zero       {"", 0, 0, ""}
 #define meshtastic_NodeRemoteHardwarePinsResponse_init_zero {0, {meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero}}
 #define meshtastic_SharedContact_init_zero       {0, false, meshtastic_User_init_zero, 0, 0}
@@ -372,8 +354,6 @@ extern "C" {
 #define meshtastic_AdminMessage_InputEvent_kb_char_tag 2
 #define meshtastic_AdminMessage_InputEvent_touch_x_tag 3
 #define meshtastic_AdminMessage_InputEvent_touch_y_tag 4
-#define meshtastic_AdminMessage_OTAEvent_reboot_ota_mode_tag 1
-#define meshtastic_AdminMessage_OTAEvent_ota_hash_tag 2
 #define meshtastic_HamParameters_call_sign_tag   1
 #define meshtastic_HamParameters_tx_power_tag    2
 #define meshtastic_HamParameters_frequency_tag   3
@@ -430,11 +410,11 @@ extern "C" {
 #define meshtastic_AdminMessage_store_ui_config_tag 46
 #define meshtastic_AdminMessage_set_ignored_node_tag 47
 #define meshtastic_AdminMessage_remove_ignored_node_tag 48
-#define meshtastic_AdminMessage_toggle_muted_node_tag 49
 #define meshtastic_AdminMessage_begin_edit_settings_tag 64
 #define meshtastic_AdminMessage_commit_edit_settings_tag 65
 #define meshtastic_AdminMessage_add_contact_tag  66
 #define meshtastic_AdminMessage_key_verification_tag 67
+#define meshtastic_AdminMessage_reboot_ota_mode_tag 68
 #define meshtastic_AdminMessage_factory_reset_device_tag 94
 #define meshtastic_AdminMessage_reboot_ota_seconds_tag 95
 #define meshtastic_AdminMessage_exit_simulator_tag 96
@@ -442,7 +422,6 @@ extern "C" {
 #define meshtastic_AdminMessage_shutdown_seconds_tag 98
 #define meshtastic_AdminMessage_factory_reset_config_tag 99
 #define meshtastic_AdminMessage_nodedb_reset_tag 100
-#define meshtastic_AdminMessage_ota_request_tag  102
 #define meshtastic_AdminMessage_session_passkey_tag 101
 
 /* Struct field encoding specification for nanopb */
@@ -490,11 +469,11 @@ X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,get_ui_config_response,get_u
 X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,store_ui_config,store_ui_config),  46) \
 X(a, STATIC,   ONEOF,    UINT32,   (payload_variant,set_ignored_node,set_ignored_node),  47) \
 X(a, STATIC,   ONEOF,    UINT32,   (payload_variant,remove_ignored_node,remove_ignored_node),  48) \
-X(a, STATIC,   ONEOF,    UINT32,   (payload_variant,toggle_muted_node,toggle_muted_node),  49) \
 X(a, STATIC,   ONEOF,    BOOL,     (payload_variant,begin_edit_settings,begin_edit_settings),  64) \
 X(a, STATIC,   ONEOF,    BOOL,     (payload_variant,commit_edit_settings,commit_edit_settings),  65) \
 X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,add_contact,add_contact),  66) \
 X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,key_verification,key_verification),  67) \
+X(a, STATIC,   ONEOF,    UENUM,    (payload_variant,reboot_ota_mode,reboot_ota_mode),  68) \
 X(a, STATIC,   ONEOF,    INT32,    (payload_variant,factory_reset_device,factory_reset_device),  94) \
 X(a, STATIC,   ONEOF,    INT32,    (payload_variant,reboot_ota_seconds,reboot_ota_seconds),  95) \
 X(a, STATIC,   ONEOF,    BOOL,     (payload_variant,exit_simulator,exit_simulator),  96) \
@@ -502,8 +481,7 @@ X(a, STATIC,   ONEOF,    INT32,    (payload_variant,reboot_seconds,reboot_second
 X(a, STATIC,   ONEOF,    INT32,    (payload_variant,shutdown_seconds,shutdown_seconds),  98) \
 X(a, STATIC,   ONEOF,    INT32,    (payload_variant,factory_reset_config,factory_reset_config),  99) \
 X(a, STATIC,   ONEOF,    BOOL,     (payload_variant,nodedb_reset,nodedb_reset), 100) \
-X(a, STATIC,   SINGULAR, BYTES,    session_passkey, 101) \
-X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,ota_request,ota_request), 102)
+X(a, STATIC,   SINGULAR, BYTES,    session_passkey, 101)
 #define meshtastic_AdminMessage_CALLBACK NULL
 #define meshtastic_AdminMessage_DEFAULT NULL
 #define meshtastic_AdminMessage_payload_variant_get_channel_response_MSGTYPE meshtastic_Channel
@@ -524,7 +502,6 @@ X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,ota_request,ota_request), 10
 #define meshtastic_AdminMessage_payload_variant_store_ui_config_MSGTYPE meshtastic_DeviceUIConfig
 #define meshtastic_AdminMessage_payload_variant_add_contact_MSGTYPE meshtastic_SharedContact
 #define meshtastic_AdminMessage_payload_variant_key_verification_MSGTYPE meshtastic_KeyVerificationAdmin
-#define meshtastic_AdminMessage_payload_variant_ota_request_MSGTYPE meshtastic_AdminMessage_OTAEvent
 
 #define meshtastic_AdminMessage_InputEvent_FIELDLIST(X, a) \
 X(a, STATIC,   SINGULAR, UINT32,   event_code,        1) \
@@ -534,12 +511,6 @@ X(a, STATIC,   SINGULAR, UINT32,   touch_y,           4)
 #define meshtastic_AdminMessage_InputEvent_CALLBACK NULL
 #define meshtastic_AdminMessage_InputEvent_DEFAULT NULL
 
-#define meshtastic_AdminMessage_OTAEvent_FIELDLIST(X, a) \
-X(a, STATIC,   SINGULAR, UENUM,    reboot_ota_mode,   1) \
-X(a, STATIC,   SINGULAR, BYTES,    ota_hash,          2)
-#define meshtastic_AdminMessage_OTAEvent_CALLBACK NULL
-#define meshtastic_AdminMessage_OTAEvent_DEFAULT NULL
-
 #define meshtastic_HamParameters_FIELDLIST(X, a) \
 X(a, STATIC,   SINGULAR, STRING,   call_sign,         1) \
 X(a, STATIC,   SINGULAR, INT32,    tx_power,          2) \
@@ -573,7 +544,6 @@ X(a, STATIC,   OPTIONAL, UINT32,   security_number,   4)
 
 extern const pb_msgdesc_t meshtastic_AdminMessage_msg;
 extern const pb_msgdesc_t meshtastic_AdminMessage_InputEvent_msg;
-extern const pb_msgdesc_t meshtastic_AdminMessage_OTAEvent_msg;
 extern const pb_msgdesc_t meshtastic_HamParameters_msg;
 extern const pb_msgdesc_t meshtastic_NodeRemoteHardwarePinsResponse_msg;
 extern const pb_msgdesc_t meshtastic_SharedContact_msg;
@@ -582,7 +552,6 @@ extern const pb_msgdesc_t meshtastic_KeyVerificationAdmin_msg;
 /* Defines for backwards compatibility with code written before nanopb-0.4.0 */
 #define meshtastic_AdminMessage_fields &meshtastic_AdminMessage_msg
 #define meshtastic_AdminMessage_InputEvent_fields &meshtastic_AdminMessage_InputEvent_msg
-#define meshtastic_AdminMessage_OTAEvent_fields &meshtastic_AdminMessage_OTAEvent_msg
 #define meshtastic_HamParameters_fields &meshtastic_HamParameters_msg
 #define meshtastic_NodeRemoteHardwarePinsResponse_fields &meshtastic_NodeRemoteHardwarePinsResponse_msg
 #define meshtastic_SharedContact_fields &meshtastic_SharedContact_msg
@@ -591,7 +560,6 @@ extern const pb_msgdesc_t meshtastic_KeyVerificationAdmin_msg;
 /* Maximum encoded size of messages (where known) */
 #define MESHTASTIC_MESHTASTIC_ADMIN_PB_H_MAX_SIZE meshtastic_AdminMessage_size
 #define meshtastic_AdminMessage_InputEvent_size  14
-#define meshtastic_AdminMessage_OTAEvent_size    36
 #define meshtastic_AdminMessage_size             511
 #define meshtastic_HamParameters_size            31
 #define meshtastic_KeyVerificationAdmin_size     25

src/mesh/generated/meshtastic/config.pb.h

@@ -66,7 +66,7 @@ typedef enum _meshtastic_Config_DeviceConfig_Role {
     but should not be given priority over other routers in order to avoid unnecessaraily
     consuming hops. */
     meshtastic_Config_DeviceConfig_Role_ROUTER_LATE = 11,
-    /* Description: Treats packets from or to favorited nodes as ROUTER_LATE, and all other packets as CLIENT.
+    /* Description: Treats packets from or to favorited nodes as ROUTER, and all other packets as CLIENT.
  Technical Details: Used for stronger attic/roof nodes to distribute messages more widely
     from weaker, indoor, or less-well-positioned nodes. Recommended for users with multiple nodes
     where one CLIENT_BASE acts as a more powerful base station, such as an attic/roof node. */

src/mesh/generated/meshtastic/deviceonly.pb.h

@@ -97,8 +97,7 @@ typedef struct _meshtastic_NodeInfoLite {
     /* Last byte of the node number of the node that should be used as the next hop to reach this node. */
     uint8_t next_hop;
     /* Bitfield for storing booleans.
- LSB 0 is_key_manually_verified
- LSB 1 is_muted */
+ LSB 0 is_key_manually_verified */
     uint32_t bitfield;
 } meshtastic_NodeInfoLite;
 
@@ -361,7 +360,7 @@ extern const pb_msgdesc_t meshtastic_BackupPreferences_msg;
 /* Maximum encoded size of messages (where known) */
 /* meshtastic_NodeDatabase_size depends on runtime parameters */
 #define MESHTASTIC_MESHTASTIC_DEVICEONLY_PB_H_MAX_SIZE meshtastic_BackupPreferences_size
-#define meshtastic_BackupPreferences_size        2362
+#define meshtastic_BackupPreferences_size        2277
 #define meshtastic_ChannelFile_size              718
 #define meshtastic_DeviceState_size              1737
 #define meshtastic_NodeInfoLite_size             196

src/mesh/generated/meshtastic/localonly.pb.h

@@ -87,9 +87,6 @@ typedef struct _meshtastic_LocalModuleConfig {
     /* Paxcounter Config */
     bool has_paxcounter;
     meshtastic_ModuleConfig_PaxcounterConfig paxcounter;
-    /* StatusMessage Config */
-    bool has_statusmessage;
-    meshtastic_ModuleConfig_StatusMessageConfig statusmessage;
 } meshtastic_LocalModuleConfig;
 
 
@@ -99,9 +96,9 @@ extern "C" {
 
 /* Initializer values for message structs */
 #define meshtastic_LocalConfig_init_default      {false, meshtastic_Config_DeviceConfig_init_default, false, meshtastic_Config_PositionConfig_init_default, false, meshtastic_Config_PowerConfig_init_default, false, meshtastic_Config_NetworkConfig_init_default, false, meshtastic_Config_DisplayConfig_init_default, false, meshtastic_Config_LoRaConfig_init_default, false, meshtastic_Config_BluetoothConfig_init_default, 0, false, meshtastic_Config_SecurityConfig_init_default}
-#define meshtastic_LocalModuleConfig_init_default {false, meshtastic_ModuleConfig_MQTTConfig_init_default, false, meshtastic_ModuleConfig_SerialConfig_init_default, false, meshtastic_ModuleConfig_ExternalNotificationConfig_init_default, false, meshtastic_ModuleConfig_StoreForwardConfig_init_default, false, meshtastic_ModuleConfig_RangeTestConfig_init_default, false, meshtastic_ModuleConfig_TelemetryConfig_init_default, false, meshtastic_ModuleConfig_CannedMessageConfig_init_default, 0, false, meshtastic_ModuleConfig_AudioConfig_init_default, false, meshtastic_ModuleConfig_RemoteHardwareConfig_init_default, false, meshtastic_ModuleConfig_NeighborInfoConfig_init_default, false, meshtastic_ModuleConfig_AmbientLightingConfig_init_default, false, meshtastic_ModuleConfig_DetectionSensorConfig_init_default, false, meshtastic_ModuleConfig_PaxcounterConfig_init_default, false, meshtastic_ModuleConfig_StatusMessageConfig_init_default}
+#define meshtastic_LocalModuleConfig_init_default {false, meshtastic_ModuleConfig_MQTTConfig_init_default, false, meshtastic_ModuleConfig_SerialConfig_init_default, false, meshtastic_ModuleConfig_ExternalNotificationConfig_init_default, false, meshtastic_ModuleConfig_StoreForwardConfig_init_default, false, meshtastic_ModuleConfig_RangeTestConfig_init_default, false, meshtastic_ModuleConfig_TelemetryConfig_init_default, false, meshtastic_ModuleConfig_CannedMessageConfig_init_default, 0, false, meshtastic_ModuleConfig_AudioConfig_init_default, false, meshtastic_ModuleConfig_RemoteHardwareConfig_init_default, false, meshtastic_ModuleConfig_NeighborInfoConfig_init_default, false, meshtastic_ModuleConfig_AmbientLightingConfig_init_default, false, meshtastic_ModuleConfig_DetectionSensorConfig_init_default, false, meshtastic_ModuleConfig_PaxcounterConfig_init_default}
 #define meshtastic_LocalConfig_init_zero         {false, meshtastic_Config_DeviceConfig_init_zero, false, meshtastic_Config_PositionConfig_init_zero, false, meshtastic_Config_PowerConfig_init_zero, false, meshtastic_Config_NetworkConfig_init_zero, false, meshtastic_Config_DisplayConfig_init_zero, false, meshtastic_Config_LoRaConfig_init_zero, false, meshtastic_Config_BluetoothConfig_init_zero, 0, false, meshtastic_Config_SecurityConfig_init_zero}
-#define meshtastic_LocalModuleConfig_init_zero   {false, meshtastic_ModuleConfig_MQTTConfig_init_zero, false, meshtastic_ModuleConfig_SerialConfig_init_zero, false, meshtastic_ModuleConfig_ExternalNotificationConfig_init_zero, false, meshtastic_ModuleConfig_StoreForwardConfig_init_zero, false, meshtastic_ModuleConfig_RangeTestConfig_init_zero, false, meshtastic_ModuleConfig_TelemetryConfig_init_zero, false, meshtastic_ModuleConfig_CannedMessageConfig_init_zero, 0, false, meshtastic_ModuleConfig_AudioConfig_init_zero, false, meshtastic_ModuleConfig_RemoteHardwareConfig_init_zero, false, meshtastic_ModuleConfig_NeighborInfoConfig_init_zero, false, meshtastic_ModuleConfig_AmbientLightingConfig_init_zero, false, meshtastic_ModuleConfig_DetectionSensorConfig_init_zero, false, meshtastic_ModuleConfig_PaxcounterConfig_init_zero, false, meshtastic_ModuleConfig_StatusMessageConfig_init_zero}
+#define meshtastic_LocalModuleConfig_init_zero   {false, meshtastic_ModuleConfig_MQTTConfig_init_zero, false, meshtastic_ModuleConfig_SerialConfig_init_zero, false, meshtastic_ModuleConfig_ExternalNotificationConfig_init_zero, false, meshtastic_ModuleConfig_StoreForwardConfig_init_zero, false, meshtastic_ModuleConfig_RangeTestConfig_init_zero, false, meshtastic_ModuleConfig_TelemetryConfig_init_zero, false, meshtastic_ModuleConfig_CannedMessageConfig_init_zero, 0, false, meshtastic_ModuleConfig_AudioConfig_init_zero, false, meshtastic_ModuleConfig_RemoteHardwareConfig_init_zero, false, meshtastic_ModuleConfig_NeighborInfoConfig_init_zero, false, meshtastic_ModuleConfig_AmbientLightingConfig_init_zero, false, meshtastic_ModuleConfig_DetectionSensorConfig_init_zero, false, meshtastic_ModuleConfig_PaxcounterConfig_init_zero}
 
 /* Field tags (for use in manual encoding/decoding) */
 #define meshtastic_LocalConfig_device_tag        1
@@ -127,7 +124,6 @@ extern "C" {
 #define meshtastic_LocalModuleConfig_ambient_lighting_tag 12
 #define meshtastic_LocalModuleConfig_detection_sensor_tag 13
 #define meshtastic_LocalModuleConfig_paxcounter_tag 14
-#define meshtastic_LocalModuleConfig_statusmessage_tag 15
 
 /* Struct field encoding specification for nanopb */
 #define meshtastic_LocalConfig_FIELDLIST(X, a) \
@@ -165,8 +161,7 @@ X(a, STATIC,   OPTIONAL, MESSAGE,  remote_hardware,  10) \
 X(a, STATIC,   OPTIONAL, MESSAGE,  neighbor_info,    11) \
 X(a, STATIC,   OPTIONAL, MESSAGE,  ambient_lighting,  12) \
 X(a, STATIC,   OPTIONAL, MESSAGE,  detection_sensor,  13) \
-X(a, STATIC,   OPTIONAL, MESSAGE,  paxcounter,       14) \
-X(a, STATIC,   OPTIONAL, MESSAGE,  statusmessage,    15)
+X(a, STATIC,   OPTIONAL, MESSAGE,  paxcounter,       14)
 #define meshtastic_LocalModuleConfig_CALLBACK NULL
 #define meshtastic_LocalModuleConfig_DEFAULT NULL
 #define meshtastic_LocalModuleConfig_mqtt_MSGTYPE meshtastic_ModuleConfig_MQTTConfig
@@ -182,7 +177,6 @@ X(a, STATIC,   OPTIONAL, MESSAGE,  statusmessage,    15)
 #define meshtastic_LocalModuleConfig_ambient_lighting_MSGTYPE meshtastic_ModuleConfig_AmbientLightingConfig
 #define meshtastic_LocalModuleConfig_detection_sensor_MSGTYPE meshtastic_ModuleConfig_DetectionSensorConfig
 #define meshtastic_LocalModuleConfig_paxcounter_MSGTYPE meshtastic_ModuleConfig_PaxcounterConfig
-#define meshtastic_LocalModuleConfig_statusmessage_MSGTYPE meshtastic_ModuleConfig_StatusMessageConfig
 
 extern const pb_msgdesc_t meshtastic_LocalConfig_msg;
 extern const pb_msgdesc_t meshtastic_LocalModuleConfig_msg;
@@ -192,9 +186,9 @@ extern const pb_msgdesc_t meshtastic_LocalModuleConfig_msg;
 #define meshtastic_LocalModuleConfig_fields &meshtastic_LocalModuleConfig_msg
 
 /* Maximum encoded size of messages (where known) */
-#define MESHTASTIC_MESHTASTIC_LOCALONLY_PB_H_MAX_SIZE meshtastic_LocalModuleConfig_size
+#define MESHTASTIC_MESHTASTIC_LOCALONLY_PB_H_MAX_SIZE meshtastic_LocalConfig_size
 #define meshtastic_LocalConfig_size              749
-#define meshtastic_LocalModuleConfig_size        758
+#define meshtastic_LocalModuleConfig_size        673
 
 #ifdef __cplusplus
 } /* extern "C" */

src/mesh/generated/meshtastic/mesh.pb.cpp

@@ -30,9 +30,6 @@ PB_BIND(meshtastic_StoreForwardPlusPlus, meshtastic_StoreForwardPlusPlus, 2)
 PB_BIND(meshtastic_Waypoint, meshtastic_Waypoint, AUTO)
 
 
-PB_BIND(meshtastic_StatusMessage, meshtastic_StatusMessage, AUTO)
-
-
 PB_BIND(meshtastic_MqttClientProxyMessage, meshtastic_MqttClientProxyMessage, 2)
 
 

src/mesh/generated/meshtastic/mesh.pb.h

@@ -92,8 +92,8 @@ typedef enum _meshtastic_HardwareModel {
  Less common/prototype boards listed here (needs one more byte over the air)
  --------------------------------------------------------------------------- */
     meshtastic_HardwareModel_LORA_RELAY_V1 = 32,
-    /* T-Echo Plus device from LilyGo */
-    meshtastic_HardwareModel_T_ECHO_PLUS = 33,
+    /* TODO: REPLACE */
+    meshtastic_HardwareModel_NRF52840DK = 33,
     /* TODO: REPLACE */
     meshtastic_HardwareModel_PPR = 34,
     /* TODO: REPLACE */
@@ -294,12 +294,6 @@ typedef enum _meshtastic_HardwareModel {
     meshtastic_HardwareModel_THINKNODE_M4 = 119,
     /* Elecrow ThinkNode M6 */
     meshtastic_HardwareModel_THINKNODE_M6 = 120,
-    /* Elecrow Meshstick 1262 */
-    meshtastic_HardwareModel_MESHSTICK_1262 = 121,
-    /* LilyGo T-Beam 1W */
-    meshtastic_HardwareModel_TBEAM_1_WATT = 122,
-    /* LilyGo T5 S3 ePaper Pro (V1 and V2) */
-    meshtastic_HardwareModel_T5_S3_EPAPER_PRO = 123,
     /* ------------------------------------------------------------------------------------------------------------------------------------------
  Reserved ID For developing private Ports. These will show up in live traffic sparsely, so we can use a high number. Keep it within 8 bits.
  ------------------------------------------------------------------------------------------------------------------------------------------ */
@@ -481,10 +475,7 @@ typedef enum _meshtastic_Routing_Error {
     meshtastic_Routing_Error_ADMIN_PUBLIC_KEY_UNAUTHORIZED = 37,
     /* Airtime fairness rate limit exceeded for a packet
  This typically enforced per portnum and is used to prevent a single node from monopolizing airtime */
-    meshtastic_Routing_Error_RATE_LIMIT_EXCEEDED = 38,
-    /* PKI encryption failed, due to no public key for the remote node
- This is different from PKI_UNKNOWN_PUBKEY which indicates a failure upon receiving a packet */
-    meshtastic_Routing_Error_PKI_SEND_FAIL_PUBLIC_KEY = 39
+    meshtastic_Routing_Error_RATE_LIMIT_EXCEEDED = 38
 } meshtastic_Routing_Error;
 
 /* Enum of message types */
@@ -858,11 +849,6 @@ typedef struct _meshtastic_Waypoint {
     uint32_t icon;
 } meshtastic_Waypoint;
 
-/* Message for node status */
-typedef struct _meshtastic_StatusMessage {
-    char status[80];
-} meshtastic_StatusMessage;
-
 typedef PB_BYTES_ARRAY_T(435) meshtastic_MqttClientProxyMessage_data_t;
 /* This message will be proxied over the PhoneAPI for the client to deliver to the MQTT server */
 typedef struct _meshtastic_MqttClientProxyMessage {
@@ -1024,9 +1010,6 @@ typedef struct _meshtastic_NodeInfo {
  Persists between NodeDB internal clean ups
  LSB 0 of the bitfield */
     bool is_key_manually_verified;
-    /* True if node has been muted
- Persistes between NodeDB internal clean ups */
-    bool is_muted;
 } meshtastic_NodeInfo;
 
 typedef PB_BYTES_ARRAY_T(16) meshtastic_MyNodeInfo_device_id_t;
@@ -1368,8 +1351,8 @@ extern "C" {
 #define _meshtastic_Position_AltSource_ARRAYSIZE ((meshtastic_Position_AltSource)(meshtastic_Position_AltSource_ALT_BAROMETRIC+1))
 
 #define _meshtastic_Routing_Error_MIN meshtastic_Routing_Error_NONE
-#define _meshtastic_Routing_Error_MAX meshtastic_Routing_Error_PKI_SEND_FAIL_PUBLIC_KEY
-#define _meshtastic_Routing_Error_ARRAYSIZE ((meshtastic_Routing_Error)(meshtastic_Routing_Error_PKI_SEND_FAIL_PUBLIC_KEY+1))
+#define _meshtastic_Routing_Error_MAX meshtastic_Routing_Error_RATE_LIMIT_EXCEEDED
+#define _meshtastic_Routing_Error_ARRAYSIZE ((meshtastic_Routing_Error)(meshtastic_Routing_Error_RATE_LIMIT_EXCEEDED+1))
 
 #define _meshtastic_StoreForwardPlusPlus_SFPP_message_type_MIN meshtastic_StoreForwardPlusPlus_SFPP_message_type_CANON_ANNOUNCE
 #define _meshtastic_StoreForwardPlusPlus_SFPP_message_type_MAX meshtastic_StoreForwardPlusPlus_SFPP_message_type_LINK_PROVIDE_SECONDHALF
@@ -1407,7 +1390,6 @@ extern "C" {
 
 
 
-
 #define meshtastic_MeshPacket_priority_ENUMTYPE meshtastic_MeshPacket_Priority
 #define meshtastic_MeshPacket_delayed_ENUMTYPE meshtastic_MeshPacket_Delayed
 #define meshtastic_MeshPacket_transport_mechanism_ENUMTYPE meshtastic_MeshPacket_TransportMechanism
@@ -1450,10 +1432,9 @@ extern "C" {
 #define meshtastic_KeyVerification_init_default  {0, {0, {0}}, {0, {0}}}
 #define meshtastic_StoreForwardPlusPlus_init_default {_meshtastic_StoreForwardPlusPlus_SFPP_message_type_MIN, {0, {0}}, {0, {0}}, {0, {0}}, {0, {0}}, 0, 0, 0, 0, 0}
 #define meshtastic_Waypoint_init_default         {0, false, 0, false, 0, 0, 0, "", "", 0}
-#define meshtastic_StatusMessage_init_default    {""}
 #define meshtastic_MqttClientProxyMessage_init_default {"", 0, {{0, {0}}}, 0}
 #define meshtastic_MeshPacket_init_default       {0, 0, 0, 0, {meshtastic_Data_init_default}, 0, 0, 0, 0, 0, _meshtastic_MeshPacket_Priority_MIN, 0, _meshtastic_MeshPacket_Delayed_MIN, 0, 0, {0, {0}}, 0, 0, 0, 0, _meshtastic_MeshPacket_TransportMechanism_MIN}
-#define meshtastic_NodeInfo_init_default         {0, false, meshtastic_User_init_default, false, meshtastic_Position_init_default, 0, 0, false, meshtastic_DeviceMetrics_init_default, 0, 0, false, 0, 0, 0, 0, 0}
+#define meshtastic_NodeInfo_init_default         {0, false, meshtastic_User_init_default, false, meshtastic_Position_init_default, 0, 0, false, meshtastic_DeviceMetrics_init_default, 0, 0, false, 0, 0, 0, 0}
 #define meshtastic_MyNodeInfo_init_default       {0, 0, 0, {0, {0}}, "", _meshtastic_FirmwareEdition_MIN, 0}
 #define meshtastic_LogRecord_init_default        {"", 0, "", _meshtastic_LogRecord_Level_MIN}
 #define meshtastic_QueueStatus_init_default      {0, 0, 0, 0}
@@ -1483,10 +1464,9 @@ extern "C" {
 #define meshtastic_KeyVerification_init_zero     {0, {0, {0}}, {0, {0}}}
 #define meshtastic_StoreForwardPlusPlus_init_zero {_meshtastic_StoreForwardPlusPlus_SFPP_message_type_MIN, {0, {0}}, {0, {0}}, {0, {0}}, {0, {0}}, 0, 0, 0, 0, 0}
 #define meshtastic_Waypoint_init_zero            {0, false, 0, false, 0, 0, 0, "", "", 0}
-#define meshtastic_StatusMessage_init_zero       {""}
 #define meshtastic_MqttClientProxyMessage_init_zero {"", 0, {{0, {0}}}, 0}
 #define meshtastic_MeshPacket_init_zero          {0, 0, 0, 0, {meshtastic_Data_init_zero}, 0, 0, 0, 0, 0, _meshtastic_MeshPacket_Priority_MIN, 0, _meshtastic_MeshPacket_Delayed_MIN, 0, 0, {0, {0}}, 0, 0, 0, 0, _meshtastic_MeshPacket_TransportMechanism_MIN}
-#define meshtastic_NodeInfo_init_zero            {0, false, meshtastic_User_init_zero, false, meshtastic_Position_init_zero, 0, 0, false, meshtastic_DeviceMetrics_init_zero, 0, 0, false, 0, 0, 0, 0, 0}
+#define meshtastic_NodeInfo_init_zero            {0, false, meshtastic_User_init_zero, false, meshtastic_Position_init_zero, 0, 0, false, meshtastic_DeviceMetrics_init_zero, 0, 0, false, 0, 0, 0, 0}
 #define meshtastic_MyNodeInfo_init_zero          {0, 0, 0, {0, {0}}, "", _meshtastic_FirmwareEdition_MIN, 0}
 #define meshtastic_LogRecord_init_zero           {"", 0, "", _meshtastic_LogRecord_Level_MIN}
 #define meshtastic_QueueStatus_init_zero         {0, 0, 0, 0}
@@ -1579,7 +1559,6 @@ extern "C" {
 #define meshtastic_Waypoint_name_tag             6
 #define meshtastic_Waypoint_description_tag      7
 #define meshtastic_Waypoint_icon_tag             8
-#define meshtastic_StatusMessage_status_tag      1
 #define meshtastic_MqttClientProxyMessage_topic_tag 1
 #define meshtastic_MqttClientProxyMessage_data_tag 2
 #define meshtastic_MqttClientProxyMessage_text_tag 3
@@ -1617,7 +1596,6 @@ extern "C" {
 #define meshtastic_NodeInfo_is_favorite_tag      10
 #define meshtastic_NodeInfo_is_ignored_tag       11
 #define meshtastic_NodeInfo_is_key_manually_verified_tag 12
-#define meshtastic_NodeInfo_is_muted_tag         13
 #define meshtastic_MyNodeInfo_my_node_num_tag    1
 #define meshtastic_MyNodeInfo_reboot_count_tag   8
 #define meshtastic_MyNodeInfo_min_app_version_tag 11
@@ -1815,11 +1793,6 @@ X(a, STATIC,   SINGULAR, FIXED32,  icon,              8)
 #define meshtastic_Waypoint_CALLBACK NULL
 #define meshtastic_Waypoint_DEFAULT NULL
 
-#define meshtastic_StatusMessage_FIELDLIST(X, a) \
-X(a, STATIC,   SINGULAR, STRING,   status,            1)
-#define meshtastic_StatusMessage_CALLBACK NULL
-#define meshtastic_StatusMessage_DEFAULT NULL
-
 #define meshtastic_MqttClientProxyMessage_FIELDLIST(X, a) \
 X(a, STATIC,   SINGULAR, STRING,   topic,             1) \
 X(a, STATIC,   ONEOF,    BYTES,    (payload_variant,data,payload_variant.data),   2) \
@@ -1866,8 +1839,7 @@ X(a, STATIC,   SINGULAR, BOOL,     via_mqtt,          8) \
 X(a, STATIC,   OPTIONAL, UINT32,   hops_away,         9) \
 X(a, STATIC,   SINGULAR, BOOL,     is_favorite,      10) \
 X(a, STATIC,   SINGULAR, BOOL,     is_ignored,       11) \
-X(a, STATIC,   SINGULAR, BOOL,     is_key_manually_verified,  12) \
-X(a, STATIC,   SINGULAR, BOOL,     is_muted,         13)
+X(a, STATIC,   SINGULAR, BOOL,     is_key_manually_verified,  12)
 #define meshtastic_NodeInfo_CALLBACK NULL
 #define meshtastic_NodeInfo_DEFAULT NULL
 #define meshtastic_NodeInfo_user_MSGTYPE meshtastic_User
@@ -2086,7 +2058,6 @@ extern const pb_msgdesc_t meshtastic_Data_msg;
 extern const pb_msgdesc_t meshtastic_KeyVerification_msg;
 extern const pb_msgdesc_t meshtastic_StoreForwardPlusPlus_msg;
 extern const pb_msgdesc_t meshtastic_Waypoint_msg;
-extern const pb_msgdesc_t meshtastic_StatusMessage_msg;
 extern const pb_msgdesc_t meshtastic_MqttClientProxyMessage_msg;
 extern const pb_msgdesc_t meshtastic_MeshPacket_msg;
 extern const pb_msgdesc_t meshtastic_NodeInfo_msg;
@@ -2121,7 +2092,6 @@ extern const pb_msgdesc_t meshtastic_ChunkedPayloadResponse_msg;
 #define meshtastic_KeyVerification_fields &meshtastic_KeyVerification_msg
 #define meshtastic_StoreForwardPlusPlus_fields &meshtastic_StoreForwardPlusPlus_msg
 #define meshtastic_Waypoint_fields &meshtastic_Waypoint_msg
-#define meshtastic_StatusMessage_fields &meshtastic_StatusMessage_msg
 #define meshtastic_MqttClientProxyMessage_fields &meshtastic_MqttClientProxyMessage_msg
 #define meshtastic_MeshPacket_fields &meshtastic_MeshPacket_msg
 #define meshtastic_NodeInfo_fields &meshtastic_NodeInfo_msg
@@ -2171,13 +2141,12 @@ extern const pb_msgdesc_t meshtastic_ChunkedPayloadResponse_msg;
 #define meshtastic_MyNodeInfo_size               83
 #define meshtastic_NeighborInfo_size             258
 #define meshtastic_Neighbor_size                 22
-#define meshtastic_NodeInfo_size                 325
+#define meshtastic_NodeInfo_size                 323
 #define meshtastic_NodeRemoteHardwarePin_size    29
 #define meshtastic_Position_size                 144
 #define meshtastic_QueueStatus_size              23
 #define meshtastic_RouteDiscovery_size           256
 #define meshtastic_Routing_size                  259
-#define meshtastic_StatusMessage_size            81
 #define meshtastic_StoreForwardPlusPlus_size     377
 #define meshtastic_ToRadio_size                  504
 #define meshtastic_User_size                     115