In autoconf, don't probe Wire unless i2c device is set (#9081)

Found another bit of code that crashes my desktop, by probing the wrong i2c bus.

.clusterfuzzlite/build.sh

@@ -51,7 +51,7 @@ for f in .clusterfuzzlite/*_fuzzer.cpp; do
 	fuzzer=$(basename "$f" .cpp)
 	cp -f "$f" src/fuzzer.cpp
 	pio run -vvv --environment "$PIO_ENV"
-	program="$PLATFORMIO_WORKSPACE_DIR/build/$PIO_ENV/meshtasticd"
+	program="$PLATFORMIO_WORKSPACE_DIR/build/$PIO_ENV/program"
 	cp "$program" "$OUT/$fuzzer"
 
 	# Copy shared libraries used by the fuzzer.

.devcontainer/devcontainer.json

@@ -8,7 +8,7 @@
   "features": {
     "ghcr.io/devcontainers/features/python:1": {
       "installTools": true,
-      "version": "3.13"
+      "version": "3.14"
     }
   },
   "customizations": {

.github/actionlint.yaml

@@ -2,5 +2,4 @@
 self-hosted-runner:
   # Labels of self-hosted runner in array of strings.
   labels:
-    - arctastic
     - test-runner

.github/actions/build-variant/action.yml

@@ -76,7 +76,7 @@ runs:
         done
 
     - name: PlatformIO ${{ inputs.arch }} download cache
-      uses: actions/cache@v5
+      uses: actions/cache@v4
       with:
         path: ~/.platformio/.cache
         key: pio-cache-${{ inputs.arch }}-${{ hashFiles('.github/actions/**', '**.ini') }}
@@ -100,9 +100,9 @@ runs:
       id: version
 
     - name: Store binaries as an artifact
-      uses: actions/upload-artifact@v6
+      uses: actions/upload-artifact@v5
       with:
-        name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.long }}
+        name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
         overwrite: true
         path: |
           ${{ inputs.artifact-paths }}

.github/actions/setup-base/action.yml

@@ -5,7 +5,7 @@ runs:
   using: composite
   steps:
     - name: Checkout code
-      uses: actions/checkout@v6
+      uses: actions/checkout@v5
       with:
         submodules: recursive
         ref: ${{github.event.pull_request.head.ref}}

.github/workflows/build_debian_src.yml

@@ -24,7 +24,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           path: meshtasticd
@@ -64,7 +64,7 @@ jobs:
           PKG_VERSION: ${{ steps.version.outputs.deb }}
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           overwrite: true

.github/workflows/build_firmware.yml

@@ -18,12 +18,11 @@ permissions: read-all
 jobs:
   pio-build:
     name: build-${{ inputs.platform }}
-    # Use 'arctastic' self-hosted runner pool when building in the main repo
+    runs-on: ubuntu-24.04
-    runs-on: ${{ github.repository_owner == 'meshtastic' && 'arctastic' || 'ubuntu-latest' }}
     outputs:
-      artifact-id: ${{ steps.upload-firmware.outputs.artifact-id }}
+      artifact-id: ${{ steps.upload.outputs.artifact-id }}
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}
@@ -56,40 +55,15 @@ jobs:
           ota_firmware_source: ${{ steps.ota_dir.outputs.src || '' }}
           ota_firmware_target: ${{ steps.ota_dir.outputs.tgt || '' }}
 
-      - name: Job summary
-        env:
-          PIO_ENV: ${{ inputs.pio_env }}
-        run: |
-          echo "## $PIO_ENV" >> $GITHUB_STEP_SUMMARY
-          echo "<details><summary><strong>Manifest</strong></summary>" >> $GITHUB_STEP_SUMMARY
-          echo '' >> $GITHUB_STEP_SUMMARY
-          echo '```json' >> $GITHUB_STEP_SUMMARY
-          cat release/firmware-*.mt.json >> $GITHUB_STEP_SUMMARY
-          echo '' >> $GITHUB_STEP_SUMMARY
-          echo '```' >> $GITHUB_STEP_SUMMARY
-          echo "</details>" >> $GITHUB_STEP_SUMMARY
-
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
-        id: upload-firmware
+        id: upload
         with:
-          name: firmware-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}
+          name: firmware-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}.zip
           overwrite: true
           path: |
-            release/*.mt.json
             release/*.bin
             release/*.elf
             release/*.uf2
             release/*.hex
-            release/*.zip
+            release/*-ota.zip
-            release/device-*.sh
-            release/device-*.bat
-
-      - name: Store manifests as an artifact
-        uses: actions/upload-artifact@v6
-        id: upload-manifest
-        with:
-          name: manifest-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}
-          overwrite: true
-          path: |
-            release/*.mt.json

.github/workflows/build_one_arch.yml

@@ -0,0 +1,176 @@
+name: Build One Arch
+
+on:
+  workflow_dispatch:
+    inputs:
+      # trunk-ignore(checkov/CKV_GHA_7)
+      arch:
+        type: choice
+        options:
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
+          - native
+
+permissions: read-all
+
+env:
+  INPUT_ARCH: ${{ github.event.inputs.arch }}
+
+jobs:
+  setup:
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v5
+      - uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
+          cache: pip
+      - run: pip install -U platformio
+      - name: Generate matrix
+        id: jsonStep
+        run: |
+          TARGETS=$(./bin/generate_ci_matrix.py $INPUT_ARCH --level extra)
+          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF"
+          echo "selected_arch=$TARGETS" >> $GITHUB_OUTPUT
+    outputs:
+      selected_arch: ${{ steps.jsonStep.outputs.selected_arch }}
+
+  version:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v5
+      - name: Get release version string
+        run: |
+          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
+        id: version
+        env:
+          BUILD_LOCATION: local
+    outputs:
+      long: ${{ steps.version.outputs.long }}
+      deb: ${{ steps.version.outputs.deb }}
+
+  build:
+    if: ${{ github.event_name != 'workflow_dispatch' }}
+    needs: [setup, version]
+    strategy:
+      fail-fast: false
+      matrix:
+        build: ${{ fromJson(needs.setup.outputs.selected_arch) }}
+    uses: ./.github/workflows/build_firmware.yml
+    with:
+      version: ${{ needs.version.outputs.long }}
+      pio_env: ${{ matrix.build.board }}
+      platform: ${{ matrix.build.arch }}
+
+  build-debian-src:
+    if: ${{ github.repository == 'meshtastic/firmware' && github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
+    uses: ./.github/workflows/build_debian_src.yml
+    with:
+      series: UNRELEASED
+      build_location: local
+    secrets: inherit
+
+  package-pio-deps-native-tft:
+    if: ${{ inputs.arch == 'native' }}
+    uses: ./.github/workflows/package_pio_deps.yml
+    with:
+      pio_env: native-tft
+    secrets: inherit
+
+  test-native:
+    if: ${{ !contains(github.ref_name, 'event/') && github.event_name != 'workflow_dispatch' ||  !contains(github.ref_name, 'event/') && inputs.arch == 'native' }}
+    uses: ./.github/workflows/test_native.yml
+
+  gather-artifacts:
+    permissions:
+      contents: write
+      pull-requests: write
+    strategy:
+      fail-fast: false
+      matrix:
+        arch:
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
+    runs-on: ubuntu-latest
+    needs: [version, build]
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v5
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - uses: actions/download-artifact@v6
+        with:
+          path: ./
+          pattern: firmware-${{inputs.arch}}-*
+          merge-multiple: true
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: Move files up
+        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
+
+      - name: Repackage in single firmware zip
+        uses: actions/upload-artifact@v5
+        with:
+          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
+          overwrite: true
+          path: |
+            ./firmware-*.bin
+            ./firmware-*.uf2
+            ./firmware-*.hex
+            ./firmware-*-ota.zip
+            ./device-*.sh
+            ./device-*.bat
+            ./littlefs-*.bin
+            ./bleota*bin
+            ./Meshtastic_nRF52_factory_erase*.uf2
+          retention-days: 30
+
+      - uses: actions/download-artifact@v6
+        with:
+          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./output
+
+      # For diagnostics
+      - name: Show artifacts
+        run: ls -lR
+
+      - name: Device scripts permissions
+        run: |
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
+
+      - name: Zip firmware
+        run: zip -j -9 -r ./firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip ./output
+
+      - name: Repackage in single elfs zip
+        uses: actions/upload-artifact@v5
+        with:
+          name: debug-elfs-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip
+          overwrite: true
+          path: ./*.elf
+          retention-days: 30
+
+      - uses: scruplelesswizard/comment-artifact@main
+        if: ${{ github.event_name == 'pull_request' }}
+        with:
+          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
+          description: "Download firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
+          github-token: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/build_one_target.yml

@@ -15,6 +15,7 @@ on:
           - rp2040
           - rp2350
           - stm32
+          - native
       target:
         type: string
         required: false
@@ -41,9 +42,10 @@ jobs:
           - rp2040
           - rp2350
           - stm32
+
     runs-on: ubuntu-24.04
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - uses: actions/setup-python@v6
         with:
           python-version: 3.x
@@ -58,13 +60,13 @@ jobs:
           echo "Arch: ${{matrix.arch}}" >> $GITHUB_STEP_SUMMARY
           echo "Ref: $GITHUB_REF" >> $GITHUB_STEP_SUMMARY
           echo "Targets:" >> $GITHUB_STEP_SUMMARY
-          echo $TARGETS | jq -r 'sort_by(.board) |.[] | "- " + .board' >> $GITHUB_STEP_SUMMARY
+          echo $TARGETS >> $GITHUB_STEP_SUMMARY
 
   version:
     if: ${{ inputs.target != '' }}
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - name: Get release version string
         run: |
           echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
@@ -85,6 +87,25 @@ jobs:
       pio_env: ${{ inputs.target }}
       platform: ${{ inputs.arch }}
 
+  build-debian-src:
+    if: ${{ github.repository == 'meshtastic/firmware' && inputs.arch == 'native' }}
+    uses: ./.github/workflows/build_debian_src.yml
+    with:
+      series: UNRELEASED
+      build_location: local
+    secrets: inherit
+
+  package-pio-deps-native-tft:
+    if: ${{ inputs.arch == 'native' }}
+    uses: ./.github/workflows/package_pio_deps.yml
+    with:
+      pio_env: native-tft
+    secrets: inherit
+
+  test-native:
+    if: ${{ !contains(github.ref_name, 'event/') && github.event_name != 'workflow_dispatch' ||  !contains(github.ref_name, 'event/') && inputs.arch == 'native' && inputs.target != '' }}
+    uses: ./.github/workflows/test_native.yml
+
   gather-artifacts:
     permissions:
       contents: write
@@ -93,12 +114,12 @@ jobs:
     needs: [version, build]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           path: ./
           pattern: firmware-*-*
@@ -111,7 +132,7 @@ jobs:
         run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: firmware-${{inputs.target}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -119,7 +140,7 @@ jobs:
             ./firmware-*.bin
             ./firmware-*.uf2
             ./firmware-*.hex
-            ./firmware-*.zip
+            ./firmware-*-ota.zip
             ./device-*.sh
             ./device-*.bat
             ./littlefs-*.bin
@@ -127,7 +148,7 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-*-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -139,14 +160,14 @@ jobs:
 
       - name: Device scripts permissions
         run: |
-          chmod +x ./output/device-install.sh || true
+          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh || true
+          chmod +x ./output/device-update.sh
 
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: debug-elfs-${{inputs.target}}-${{ needs.version.outputs.long }}.zip
           overwrite: true

.github/workflows/docker_build.yml

@@ -47,7 +47,7 @@ jobs:
     runs-on: ${{ inputs.runs-on }}
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/docker_manifest.yml

@@ -83,7 +83,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/first_time_contributor.yml

@@ -1,47 +0,0 @@
-name: Welcome First-Time Contributor
-
-on:
-  issues:
-    types: opened
-  pull_request_target:
-    types: opened
-
-permissions: {}
-
-jobs:
-  welcome:
-    runs-on: ubuntu-latest
-    permissions:
-      issues: write # Required to post comments and labels on issues
-      pull-requests: write # Required to post comments and labels on PRs
-    steps:
-      - uses: plbstl/first-contribution@v4
-        with:
-          labels: first-contribution
-          issue-opened-msg: |
-            ### @{fc-author}, Welcome to Meshtastic! :wave:
-
-            Thanks for opening your first issue. If it's helpful, an easy way
-            to get logs is the "Open Serial Monitor" button on the [Web Flasher](https://flasher.meshtastic.org).
-
-            If you have ideas for features, note that we often debate big ideas
-            in the [discussions tab](https://github.com/meshtastic/firmware/discussions/categories/ideas)
-            first. This tracker tends to be for ideas that have community
-            consensus and a clear implementation.
-
-            We're very active [on discord](https://discord.com/invite/meshtastic),
-            especially the \#firmware and \#alphanauts-testing channels. If you'll
-            be around for a while, we'd love to see you there!
-
-            Welcome to the community! :heart:
-
-          pr-opened-msg: |
-            ### @{fc-author}, Welcome to Meshtastic!
-
-            Thanks for opening your first pull request. We really appreciate it.
-
-            We discuss work as a team in discord, please join us in the [#firmware channel](https://discord.com/invite/meshtastic).
-            There's a big backlog of patches at the moment. If you have time,
-            please help us with some code review and testing of [other PRs](https://github.com/meshtastic/firmware/pulls)!
-
-            Welcome to the team :smile:

.github/workflows/hook_copr.yml

@@ -19,7 +19,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           ref: ${{ github.ref }}

.github/workflows/main_matrix.yml

@@ -35,7 +35,7 @@ jobs:
           - check
     runs-on: ubuntu-24.04
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - uses: actions/setup-python@v6
         with:
           python-version: 3.x
@@ -59,7 +59,7 @@ jobs:
   version:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - name: Get release version string
         run: |
           echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
@@ -77,21 +77,16 @@ jobs:
       fail-fast: false
       matrix:
         check: ${{ fromJson(needs.setup.outputs.check) }}
-    # Use 'arctastic' self-hosted runner pool when checking in the main repo
+
-    runs-on: ${{ github.repository_owner == 'meshtastic' && 'arctastic' || 'ubuntu-latest' }}
+    runs-on: ubuntu-latest
     if: ${{ github.event_name != 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
-        with:
+      - name: Build base
-          submodules: recursive
+        id: base
-          ref: ${{github.event.pull_request.head.ref}}
+        uses: ./.github/actions/setup-base
-          repository: ${{github.event.pull_request.head.repo.full_name}}
       - name: Check ${{ matrix.check.board }}
-        uses: meshtastic/gh-action-firmware@main
+        run: bin/check-all.sh ${{ matrix.check.board }}
-        with:
-          pio_platform: ${{ matrix.check.platform }}
-          pio_env: ${{ matrix.check.board }}
-          pio_target: check
 
   build:
     needs: [setup, version]
@@ -168,12 +163,12 @@ jobs:
     needs: [version, build]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           path: ./
           pattern: firmware-${{matrix.arch}}-*
@@ -182,17 +177,19 @@ jobs:
       - name: Display structure of downloaded files
         run: ls -R
 
+      - name: Move files up
+        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
+
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           overwrite: true
           path: |
-            ./firmware-*.mt.json
             ./firmware-*.bin
             ./firmware-*.uf2
             ./firmware-*.hex
-            ./firmware-*.zip
+            ./firmware-*-ota.zip
             ./device-*.sh
             ./device-*.bat
             ./littlefs-*.bin
@@ -200,7 +197,7 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -212,16 +209,16 @@ jobs:
 
       - name: Device scripts permissions
         run: |
-          chmod +x ./output/device-install.sh || true
+          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh || true
+          chmod +x ./output/device-update.sh
 
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           overwrite: true
           path: ./*.elf
           retention-days: 30
@@ -233,62 +230,24 @@ jobs:
           description: "Download firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
           github-token: ${{ secrets.GITHUB_TOKEN }}
 
-  shame:
-    if: github.repository == 'meshtastic/firmware'
-    continue-on-error: true
-    runs-on: ubuntu-latest
-    needs: [build]
-    steps:
-      - uses: actions/checkout@v6
-        if: github.event_name == 'pull_request_target'
-        with:
-          filter: blob:none # means we download all the git history but none of the commit (except ones with checkout like the head)
-          fetch-depth: 0
-      - name: Download the current manifests
-        uses: actions/download-artifact@v7
-        with:
-          path: ./manifests-new/
-          pattern: manifest-*
-          merge-multiple: true
-      - name: Upload combined manifests for later commit and global stats crunching.
-        uses: actions/upload-artifact@v6
-        id: upload-manifest
-        with:
-          name: manifests-${{ github.sha }}
-          overwrite: true
-          path: manifests-new/*.mt.json
-      - name: Find the merge base
-        if: github.event_name == 'pull_request_target'
-        run: echo "MERGE_BASE=$(git merge-base "origin/$base" "$head")" >> $GITHUB_ENV
-        env:
-          base: ${{ github.base_ref }}
-          head: ${{ github.sha }}
-      # Currently broken (for-loop through EVERY artifact -- rate limiting)
-      # - name: Download the old manifests
-      #   if: github.event_name == 'pull_request_target'
-      #   run: gh run download -R "$repo" --name "manifests-$merge_base" --dir manifest-old/
-      #   env:
-      #     GH_TOKEN: ${{ github.token }}
-      #     merge_base: ${{ env.MERGE_BASE }}
-      #     repo: ${{ github.repository }}
-      # - name: Do scan and post comment
-      #   if: github.event_name == 'pull_request_target'
-      #   run: python3 bin/shame.py ${{ github.event.pull_request.number }} manifests-old/ manifests-new/
-
   release-artifacts:
     runs-on: ubuntu-latest
     if: ${{ github.event_name == 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
     outputs:
       upload_url: ${{ steps.create_release.outputs.upload_url }}
     needs:
-      - setup
       - version
       - gather-artifacts
       - build-debian-src
       - package-pio-deps-native-tft
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
+
+      - name: Setup Python
+        uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
 
       - name: Create release
         uses: softprops/action-gh-release@v2
@@ -302,14 +261,14 @@ jobs:
             Autogenerated by github action, developer should edit as required before publishing...
 
       - name: Download source deb
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
           pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
           merge-multiple: true
           path: ./output/debian-src
 
       - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
           pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -325,25 +284,10 @@ jobs:
       - name: Display structure of downloaded files
         run: ls -lR
 
-      - name: Generate Release manifest
+      - name: Add Linux sources to GtiHub Release
-        run: |
-          jq -n --arg ver "${{ needs.version.outputs.long }}" --argjson targets ${{ toJson(needs.setup.outputs.all) }} '{
-            "version": $ver,
-            "targets": $targets
-          }' > firmware-${{ needs.version.outputs.long }}.json
-
-      - name: Save Release manifest artifact
-        uses: actions/upload-artifact@v6
-        with:
-          name: manifest-${{ needs.version.outputs.long }}
-          overwrite: true
-          path: firmware-${{ needs.version.outputs.long }}.json
-
-      - name: Add sources to GitHub Release
         # Only run when targeting master branch with workflow_dispatch
         if: ${{ github.ref_name == 'master' }}
         run: |
-          gh release upload v${{ needs.version.outputs.long }} ./firmware-${{ needs.version.outputs.long }}.json
           gh release upload v${{ needs.version.outputs.long }} ./output/meshtasticd-${{ needs.version.outputs.deb }}-src.zip
           gh release upload v${{ needs.version.outputs.long }} ./output/platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip
         env:
@@ -367,14 +311,14 @@ jobs:
     needs: [release-artifacts, version]
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Setup Python
         uses: actions/setup-python@v6
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -385,15 +329,15 @@ jobs:
 
       - name: Device scripts permissions
         run: |
-          chmod +x ./output/device-install.sh || true
+          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh || true
+          chmod +x ./output/device-update.sh
 
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           merge-multiple: true
           path: ./elfs
 
@@ -422,26 +366,19 @@ jobs:
         esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Setup Python
         uses: actions/setup-python@v6
         with:
           python-version: 3.x
 
-      - name: Get firmware artifacts
+      - uses: actions/download-artifact@v6
-        uses: actions/download-artifact@v7
         with:
           pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
           merge-multiple: true
           path: ./publish
 
-      - name: Get manifest artifact
-        uses: actions/download-artifact@v7
-        with:
-          pattern: manifest-${{ needs.version.outputs.long }}
-          path: ./publish
-
       - name: Publish firmware to meshtastic.github.io
         uses: peaceiris/actions-gh-pages@v4
         env:

.github/workflows/merge_queue.yml

@@ -17,7 +17,7 @@ jobs:
           - check
     runs-on: ubuntu-24.04
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - uses: actions/setup-python@v6
         with:
           python-version: 3.x
@@ -40,7 +40,7 @@ jobs:
   version:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - name: Get release version string
         run: |
           echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
@@ -62,7 +62,7 @@ jobs:
     runs-on: ubuntu-latest
     if: ${{ github.event_name != 'workflow_dispatch' }}
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
@@ -142,12 +142,12 @@ jobs:
     needs: [version, build]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           path: ./
           pattern: firmware-${{matrix.arch}}-*
@@ -160,7 +160,7 @@ jobs:
         run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -168,7 +168,7 @@ jobs:
             ./firmware-*.bin
             ./firmware-*.uf2
             ./firmware-*.hex
-            ./firmware-*.zip
+            ./firmware-*-ota.zip
             ./device-*.sh
             ./device-*.bat
             ./littlefs-*.bin
@@ -176,7 +176,7 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -188,16 +188,16 @@ jobs:
 
       - name: Device scripts permissions
         run: |
-          chmod +x ./output/device-install.sh || true
+          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh || true
+          chmod +x ./output/device-update.sh
 
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           overwrite: true
           path: ./*.elf
           retention-days: 30
@@ -221,7 +221,12 @@ jobs:
       - package-pio-deps-native-tft
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
+
+      - name: Setup Python
+        uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
 
       - name: Create release
         uses: softprops/action-gh-release@v2
@@ -235,14 +240,14 @@ jobs:
             Autogenerated by github action, developer should edit as required before publishing...
 
       - name: Download source deb
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
           pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
           merge-multiple: true
           path: ./output/debian-src
 
       - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
           pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -285,14 +290,14 @@ jobs:
     needs: [release-artifacts, version]
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Setup Python
         uses: actions/setup-python@v6
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -303,15 +308,15 @@ jobs:
 
       - name: Device scripts permissions
         run: |
-          chmod +x ./output/device-install.sh || true
+          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh || true
+          chmod +x ./output/device-update.sh
 
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           merge-multiple: true
           path: ./elfs
 
@@ -340,14 +345,14 @@ jobs:
         esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Setup Python
         uses: actions/setup-python@v6
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
           merge-multiple: true

.github/workflows/nightly.yml

@@ -14,7 +14,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1
@@ -31,7 +31,7 @@ jobs:
       pull-requests: write # For trunk to create PRs
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Trunk Upgrade
         uses: trunk-io/trunk-action/upgrade@v1

.github/workflows/package_obs.yml

@@ -34,7 +34,7 @@ jobs:
     needs: build-debian-src
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           path: meshtasticd
@@ -58,7 +58,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/package_pio_deps.yml

@@ -24,7 +24,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}
@@ -56,7 +56,7 @@ jobs:
           PLATFORMIO_CORE_DIR: pio/core
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: platformio-deps-${{ inputs.pio_env }}-${{ steps.version.outputs.long }}
           overwrite: true

.github/workflows/package_ppa.yml

@@ -32,7 +32,7 @@ jobs:
     needs: build-debian-src
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           path: meshtasticd
@@ -60,7 +60,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/pr_enforce_labels.yml

@@ -17,7 +17,7 @@ jobs:
         with:
           script: |
             const labels = context.payload.pull_request.labels.map(label => label.name);
-            const requiredLabels = ['bugfix', 'enhancement', 'hardware-support', 'dependencies', 'submodules', 'github_actions', 'trunk', 'cleanup'];
+            const requiredLabels = ['bugfix', 'enhancement', 'hardware-support', 'dependencies', 'submodules', 'github_actions', 'trunk'];
             const hasRequiredLabel = labels.some(label => requiredLabels.includes(label));
             if (!hasRequiredLabel) {
               core.setFailed(`PR must have at least one of the following labels before it can be merged: ${requiredLabels.join(', ')}.`);

.github/workflows/pr_tests.yml

@@ -40,7 +40,7 @@ jobs:
       checks: write
       pull-requests: write
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
         with:
           submodules: recursive
 
@@ -50,9 +50,9 @@ jobs:
 
       - name: Download test artifacts
         if: needs.native-tests.result != 'skipped'
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
-          name: platformio-test-report-${{ steps.version.outputs.long }}
+          name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           merge-multiple: true
 
       - name: Parse test results and create detailed summary

.github/workflows/release_channels.yml

@@ -60,10 +60,7 @@ jobs:
         shell: bash
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
-        with:
-          # Always use master branch for version bumps
-          ref: master
 
       - name: Setup Python
         uses: actions/setup-python@v6
@@ -102,7 +99,7 @@ jobs:
           PIP_DISABLE_PIP_VERSION_CHECK: 1
 
       - name: Create Bumps pull request
-        uses: peter-evans/create-pull-request@v8
+        uses: peter-evans/create-pull-request@v7
         with:
           base: ${{ github.event.repository.default_branch }}
           branch: create-pull-request/bump-version

.github/workflows/sec_sast_semgrep_cron.yml

@@ -21,7 +21,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       # step 2
       - name: full scan
@@ -33,7 +33,7 @@ jobs:
 
       # step 3
       - name: save report as pipeline artifact
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: report.sarif
           overwrite: true

.github/workflows/sec_sast_semgrep_pull.yml

@@ -13,7 +13,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           fetch-depth: 0
 

.github/workflows/stale_bot.yml

@@ -17,7 +17,7 @@ jobs:
 
     steps:
       - name: Stale PR+Issues
-        uses: actions/stale@v10.1.1
+        uses: actions/stale@v10.1.0
         with:
           days-before-stale: 45
           stale-issue-message: This issue has not had any comment or update in the last month. If it is still relevant, please post update comments. If no comments are made, this issue will be closed automagically in 7 days.

.github/workflows/test_native.yml

@@ -14,7 +14,7 @@ jobs:
     name: Native Simulator Tests
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -40,7 +40,7 @@ jobs:
 
       - name: Integration test
         run: |
-          .pio/build/coverage/meshtasticd -s &
+          .pio/build/coverage/program -s &
           PID=$!
           timeout 20 bash -c "until ls -al /proc/$PID/fd | grep socket; do sleep 1; done"
           echo "Simulator started, launching python test..."
@@ -59,10 +59,10 @@ jobs:
         id: version
 
       - name: Save coverage information
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         if: always() # run this step even if previous step failed
         with:
-          name: lcov-coverage-info-native-simulator-test-${{ steps.version.outputs.long }}
+          name: lcov-coverage-info-native-simulator-test-${{ steps.version.outputs.long }}.zip
           overwrite: true
           path: ./coverage_*.info
 
@@ -70,7 +70,7 @@ jobs:
     name: Native PlatformIO Tests
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -94,9 +94,9 @@ jobs:
 
       - name: Save test results
         if: always() # run this step even if previous step failed
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
-          name: platformio-test-report-${{ steps.version.outputs.long }}
+          name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           overwrite: true
           path: ./testreport.xml
 
@@ -108,10 +108,10 @@ jobs:
           sed -i -e "s#${PWD}#.#" coverage_tests.info # Make paths relative.
 
       - name: Save coverage information
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         if: always() # run this step even if previous step failed
         with:
-          name: lcov-coverage-info-native-platformio-tests-${{ steps.version.outputs.long }}
+          name: lcov-coverage-info-native-platformio-tests-${{ steps.version.outputs.long }}.zip
           overwrite: true
           path: ./coverage_*.info
 
@@ -127,7 +127,7 @@ jobs:
       - platformio-tests
     if: always()
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -137,22 +137,22 @@ jobs:
         id: version
 
       - name: Download test artifacts
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
-          name: platformio-test-report-${{ steps.version.outputs.long }}
+          name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           merge-multiple: true
 
       - name: Test Report
-        uses: dorny/test-reporter@v2.4.0
+        uses: dorny/test-reporter@v2.2.0
         with:
           name: PlatformIO Tests
           path: testreport.xml
           reporter: java-junit
 
       - name: Download coverage artifacts
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
-          pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}
+          pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}.zip
           path: code-coverage-report
           merge-multiple: true
 
@@ -163,7 +163,7 @@ jobs:
           genhtml --quiet --legend --prefix "${PWD}" code-coverage-report/coverage_src.info --output-directory code-coverage-report
 
       - name: Save Code Coverage Report
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
-          name: code-coverage-report-${{ steps.version.outputs.long }}
+          name: code-coverage-report-${{ steps.version.outputs.long }}.zip
           path: code-coverage-report

.github/workflows/tests.yml

@@ -20,9 +20,9 @@ jobs:
     runs-on: test-runner
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
-      # - uses: actions/setup-python@v6
+      # - uses: actions/setup-python@v5
       #   with:
       #     python-version: '3.10'
 

.github/workflows/trunk_annotate_pr.yml

@@ -18,7 +18,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1

.github/workflows/trunk_check.yml

@@ -16,7 +16,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1

.github/workflows/trunk_format_pr.yml

@@ -15,7 +15,7 @@ jobs:
       pull-requests: write
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}

.github/workflows/update_protobufs.yml

@@ -11,12 +11,12 @@ jobs:
       pull-requests: write
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: true
 
       - name: Update submodule
-        if: ${{ github.ref == 'refs/heads/master' || github.ref == 'refs/heads/develop' }}
+        if: ${{ github.ref == 'refs/heads/master' }}
         run: |
           git submodule update --remote protobufs
 
@@ -31,7 +31,7 @@ jobs:
           ./bin/regen-protos.sh
 
       - name: Create pull request
-        uses: peter-evans/create-pull-request@v8
+        uses: peter-evans/create-pull-request@v7
         with:
           branch: create-pull-request/update-protobufs
           labels: submodules

.gitignore

@@ -41,12 +41,3 @@ src/mesh/raspihttp/private_key.pem
 
 # Ignore logo (set at build time with platformio-custom.py)
 data/boot/logo.*
-
-# pioarduino platform
-managed_components/*
-arduino-lib-builder*
-dependencies.lock
-idf_component.yml
-CMakeLists.txt
-sdkconfig.*
-.dummy/*

.trunk/trunk.yaml

@@ -4,31 +4,31 @@ cli:
 plugins:
   sources:
     - id: trunk
-      ref: v1.7.4
+      ref: v1.7.3
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.496
+    - checkov@3.2.492
-    - renovate@42.66.14
+    - renovate@42.5.4
-    - prettier@3.7.4
+    - prettier@3.6.2
-    - trufflehog@3.92.4
+    - trufflehog@3.90.13
     - yamllint@1.37.1
-    - bandit@1.9.2
+    - bandit@1.8.6
-    - trivy@0.68.2
+    - trivy@0.67.2
     - taplo@0.10.0
-    - ruff@0.14.10
+    - ruff@0.14.4
     - isort@7.0.0
-    - markdownlint@0.47.0
+    - markdownlint@0.45.0
-    - oxipng@10.0.0
+    - oxipng@9.1.5
     - svgo@4.0.0
-    - actionlint@1.7.9
+    - actionlint@1.7.8
     - flake8@7.3.0
     - hadolint@2.14.0
     - shfmt@3.6.0
     - shellcheck@0.11.0
-    - black@25.12.0
+    - black@25.11.0
     - git-diff-check
-    - gitleaks@8.30.0
+    - gitleaks@8.29.0
     - clang-format@16.0.3
   ignore:
     - linters: [ALL]

.vscode/extensions.json

@@ -1,9 +1,10 @@
 {
+    // See http://go.microsoft.com/fwlink/?LinkId=827846
+    // for the documentation about the extensions.json format
     "recommendations": [
-        "pioarduino.pioarduino-ide"
+        "platformio.platformio-ide"
     ],
     "unwantedRecommendations": [
-        "ms-vscode.cpptools-extension-pack",
+        "ms-vscode.cpptools-extension-pack"
-        "platformio.platformio-ide"
     ]
 }

README.md

@@ -37,3 +37,4 @@ Join our community and help improve Meshtastic! 🚀
 ## Stats
 
 ![Alt](https://repobeats.axiom.co/api/embed/8025e56c482ec63541593cc5bd322c19d5c0bdcf.svg "Repobeats analytics image")
+

SECURITY.md

@@ -4,8 +4,8 @@
 
 | Firmware Version | Supported          |
 | ---------------- | ------------------ |
-| 2.7.x            | :white_check_mark: |
+| 2.6.x            | :white_check_mark: |
-| <= 2.6.x         | :x:                |
+| <= 2.5.x         | :x:                |
 
 ## Reporting a Vulnerability
 

alpine.Dockerfile

@@ -28,7 +28,7 @@ RUN bash ./bin/build-native.sh "$PIO_ENV" && \
 
 # ##### PRODUCTION BUILD #############
 
-FROM alpine:3.23
+FROM alpine:3.22
 LABEL org.opencontainers.image.title="Meshtastic" \
       org.opencontainers.image.description="Alpine Meshtastic daemon" \
       org.opencontainers.image.url="https://meshtastic.org" \

arch/esp32/esp32.ini

@@ -0,0 +1,80 @@
+; Common settings for ESP targes, mixin with extends = esp32_base
+[esp32_base]
+extends = arduino_base
+custom_esp32_kind = esp32
+platform =
+  # renovate: datasource=custom.pio depName=platformio/espressif32 packageName=platformio/platform/espressif32
+  platformio/espressif32@6.11.0
+
+build_src_filter = 
+  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
+
+upload_speed = 921600
+debug_init_break = tbreak setup
+monitor_filters = esp32_exception_decoder
+
+board_build.filesystem = littlefs
+
+# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
+# See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
+# This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
+build_unflags = -fno-lto
+build_flags =
+  ${arduino_base.build_flags}
+  -flto
+  -Wall
+  -Wextra
+  -Isrc/platform/esp32
+  -std=c++11
+  -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG
+  -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
+  -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
+  -DAXP_DEBUG_PORT=Serial
+  -DCONFIG_BT_NIMBLE_ENABLED
+  -DCONFIG_BT_NIMBLE_MAX_BONDS=6 # default is 3
+  -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
+  -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
+  -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=8192
+  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
+  -DSERIAL_BUFFER_SIZE=4096
+  -DSERIAL_HAS_ON_RECEIVE
+  -DLIBPAX_ARDUINO
+  -DLIBPAX_WIFI
+  -DLIBPAX_BLE
+  -DHAS_UDP_MULTICAST=1
+  ;-DDEBUG_HEAP
+
+lib_deps =
+  ${arduino_base.lib_deps}
+  ${networking_base.lib_deps}
+  ${environmental_base.lib_deps}
+  ${environmental_extra.lib_deps}
+  ${radiolib_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
+  https://github.com/meshtastic/esp32_https_server/archive/3223704846752e6d545139204837bdb2a55459ca.zip
+  # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
+  h2zero/NimBLE-Arduino@^1.4.3
+  # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
+  https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
+  # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
+  https://github.com/lewisxhe/XPowersLib/archive/v0.3.1.zip
+  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
+  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0
+
+lib_ignore = 
+  segger_rtt
+  ESP32 BLE Arduino
+
+; leave this commented out to avoid breaking Windows
+;upload_port = /dev/ttyUSB0
+;monitor_port = /dev/ttyUSB0
+
+; Please don't delete these lines. JM uses them.
+;upload_port = /dev/cu.SLAB_USBtoUART
+;monitor_port = /dev/cu.SLAB_USBtoUART
+
+; customize the partition table
+; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
+board_build.partitions = partition-table.csv

arch/esp32/esp32c3.ini

@@ -0,0 +1,6 @@
+[esp32c3_base]
+extends = esp32_base
+custom_esp32_kind = esp32c3
+
+monitor_speed = 115200
+monitor_filters = esp32_c3_exception_decoder

arch/esp32/esp32c6.ini

@@ -0,0 +1,47 @@
+[esp32c6_base]
+extends = esp32_base
+platform =
+  # Do not renovate until we have switched to pioarduino tagged builds
+  https://github.com/Jason2866/platform-espressif32/archive/22faa566df8c789000f8136cd8d0aca49617af55.zip
+build_flags =
+  ${arduino_base.build_flags}
+  -Wall
+  -Wextra
+  -Isrc/platform/esp32
+  -std=c++11
+  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
+  -DSERIAL_BUFFER_SIZE=4096
+  -DLIBPAX_ARDUINO
+  -DLIBPAX_WIFI
+  -DLIBPAX_BLE
+  -DMESHTASTIC_EXCLUDE_WEBSERVER
+  ;-DDEBUG_HEAP
+  ; TEMP
+  -DHAS_BLUETOOTH=0
+  -DMESHTASTIC_EXCLUDE_PAXCOUNTER
+  -DMESHTASTIC_EXCLUDE_BLUETOOTH
+
+lib_deps =
+  ${arduino_base.lib_deps}
+  ${networking_base.lib_deps}
+  ${environmental_base.lib_deps}
+  ${environmental_extra.lib_deps}
+  ${radiolib_base.lib_deps}
+  # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
+  lewisxhe/XPowersLib@0.3.1
+  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
+  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0
+
+build_src_filter = 
+ ${esp32_base.build_src_filter} -<mesh/http> 
+
+monitor_speed = 460800
+monitor_filters = esp32_c3_exception_decoder
+
+lib_ignore =
+  NonBlockingRTTTL
+  NimBLE-Arduino
+  libpax
+  

arch/esp32/esp32s2.ini

@@ -0,0 +1,19 @@
+[esp32s2_base]
+extends = esp32_base
+custom_esp32_kind = esp32s2
+
+build_src_filter = 
+ ${esp32_base.build_src_filter} - <libpax/> -<nimble/> -<mesh/raspihttp>
+
+monitor_speed = 115200
+
+build_flags =
+  ${esp32_base.build_flags} 
+  -DHAS_BLUETOOTH=0
+  -DMESHTASTIC_EXCLUDE_PAXCOUNTER
+  -DMESHTASTIC_EXCLUDE_BLUETOOTH
+  
+lib_ignore = 
+  ${esp32_base.lib_ignore} 
+  NimBLE-Arduino
+  libpax

arch/esp32/esp32s3.ini

@@ -0,0 +1,5 @@
+[esp32s3_base]
+extends = esp32_base
+custom_esp32_kind = esp32s3
+
+monitor_speed = 115200

arch/nrf52/nrf52.ini

@@ -2,39 +2,25 @@
 ; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files
 platform =
   # renovate: datasource=custom.pio depName=platformio/nordicnrf52 packageName=platformio/platform/nordicnrf52
-  platformio/nordicnrf52@10.10.0
+  platformio/nordicnrf52@^10.8.0
 extends = arduino_base
 platform_packages =
   ; our custom Git version until they merge our PR
   # TODO renovate
-  platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino#c770c8a16a351b55b86e347a3d9d7b74ad0bbf39
+  platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino#e13f5820002a4fb2a5e6754b42ace185277e5adf
   ; Don't renovate toolchain-gccarmnoneeabi
   platformio/toolchain-gccarmnoneeabi@~1.90301.0
 
-extra_scripts =
+build_type = debug
-  ${env.extra_scripts}
-  extra_scripts/nrf52_extra.py
-
-build_type = release
 build_flags =
-  -include variants/nrf52840/cpp_overrides/lfs_util.h
+  -include arch/nrf52/cpp_overrides/lfs_util.h
   ${arduino_base.build_flags}
+  -DSERIAL_BUFFER_SIZE=1024
   -Wno-unused-variable
   -Isrc/platform/nrf52
   -DLFS_NO_ASSERT                      ; Disable LFS assertions , see https://github.com/meshtastic/firmware/pull/3818
   -DMESHTASTIC_EXCLUDE_AUDIO=1
   -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
-  -Os
-build_unflags =
-  -Ofast
-  -Og
-  -ggdb3
-  -ggdb2
-  -g3
-  -g2
-  -g
-  -g1
-  -g0
 
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp> -<serialization/>

arch/nrf52/nrf52832.ini

@@ -0,0 +1,7 @@
+[nrf52832_base]
+extends = nrf52_base
+
+build_flags = ${nrf52_base.build_flags} 
+
+lib_deps =
+  ${nrf52_base.lib_deps}

arch/nrf52/nrf52840.ini

@@ -1,16 +1,14 @@
 [nrf52840_base]
 extends = nrf52_base
 
-build_flags =
+build_flags = ${nrf52_base.build_flags} 
-   ${nrf52_base.build_flags}
-  -DSERIAL_BUFFER_SIZE=4096
 
 lib_deps =
   ${nrf52_base.lib_deps}
   ${environmental_base.lib_deps}
   ${environmental_extra.lib_deps}
   # renovate: datasource=git-refs depName=Kongduino-Adafruit_nRFCrypto packageName=https://github.com/Kongduino/Adafruit_nRFCrypto gitBranch=master
-  https://github.com/Kongduino/Adafruit_nRFCrypto/archive/8cde7189b5ead9dcd49f72601b43b969c0bbc06e.zip
+  https://github.com/Kongduino/Adafruit_nRFCrypto/archive/5f838d2709461a2c981f642917aa50254a25c14c.zip
 
 ; Common NRF52 debugging settings follow.  See the Meshtastic developer docs for how to connect SWD debugging probes to your board.
 

arch/portduino/portduino.ini

@@ -21,13 +21,12 @@ build_src_filter =
 lib_deps =
   ${env.lib_deps}
   ${networking_base.lib_deps}
-  ${networking_extra.lib_deps}
   ${radiolib_base.lib_deps}
   ${environmental_base.lib_deps}
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
   rweather/Crypto@0.4.0
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@^1.2.0
   # renovate: datasource=git-refs depName=libch341-spi-userspace packageName=https://github.com/pine64/libch341-spi-userspace gitBranch=main
   https://github.com/pine64/libch341-spi-userspace/archive/af9bc27c9c30fa90772279925b7c5913dff789b4.zip
   # renovate: datasource=custom.pio depName=adafruit/Adafruit seesaw Library packageName=adafruit/library/Adafruit seesaw Library

arch/rp2xx0/rp2040.ini

@@ -2,12 +2,12 @@
 [rp2040_base]
 platform =
   # TODO renovate
-  https://github.com/maxgerhardt/platform-raspberrypi#cc24cfef37ed22ca9f2a6aead28c2deb76c39f24
+  https://github.com/maxgerhardt/platform-raspberrypi#76ecf3c7e9dd4503af0331154c4ca1cddc4b03e5
-  ; For arduino-pico >= 5.4.4
+  ; For arduino-pico >= 4.4.3
 extends = arduino_base
 platform_packages =
   # TODO renovate
-  arduino-pico@https://github.com/earlephilhower/arduino-pico/releases/download/5.4.4/rp2040-5.4.4.zip
+  framework-arduinopico@https://github.com/earlephilhower/arduino-pico#4.4.3
 
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
@@ -17,7 +17,6 @@ build_flags =
   -Isrc/platform/rp2xx0/hardware_rosc/include
   -Isrc/platform/rp2xx0/pico_sleep/include
   -D__PLAT_RP2040__
-  -D__FREERTOS=1
 #  -D _POSIX_THREADS
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/> -<mesh/wifi/> -<mesh/http/> -<mesh/raspihttp>

arch/rp2xx0/rp2350.ini

@@ -2,12 +2,12 @@
 [rp2350_base]
 platform =
   # TODO renovate
-  https://github.com/maxgerhardt/platform-raspberrypi#cc24cfef37ed22ca9f2a6aead28c2deb76c39f24
+  https://github.com/maxgerhardt/platform-raspberrypi#76ecf3c7e9dd4503af0331154c4ca1cddc4b03e5
-  ; For arduino-pico >= 5.4.4
+  ; For arduino-pico >= 4.4.3
 extends = arduino_base
 platform_packages =
   # TODO renovate
-  arduino-pico@https://github.com/earlephilhower/arduino-pico/releases/download/5.4.4/rp2040-5.4.4.zip
+  framework-arduinopico@https://github.com/earlephilhower/arduino-pico#4.4.3
 
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
@@ -15,7 +15,6 @@ build_flags =
   ${arduino_base.build_flags} -Wno-unused-variable -Wcast-align
   -Isrc/platform/rp2xx0
   -D__PLAT_RP2350__
-  -D__FREERTOS=1
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/> -<mesh/wifi/> -<mesh/http/> -<mesh/raspihttp> -<platform/rp2xx0/pico_sleep> -<platform/rp2xx0/hardware_rosc>
 

arch/stm32/stm32.ini

@@ -2,13 +2,13 @@
 extends = arduino_base
 platform =
   # renovate: datasource=custom.pio depName=platformio/ststm32 packageName=platformio/platform/ststm32
-  platformio/ststm32@19.4.0
+  platformio/ststm32@19.3.0
 platform_packages =
-  # renovate: datasource=github-tags depName=Arduino_Core_STM32 packageName=stm32duino/Arduino_Core_STM32
+  # TODO renovate
   platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32/archive/2.10.1.zip
 extra_scripts =
   ${env.extra_scripts}
-  extra_scripts/stm32_extra.py
+  post:extra_scripts/extra_stm32.py
 
 build_type = release
 
@@ -37,9 +37,6 @@ build_flags =
   -DRADIOLIB_EXCLUDE_LR11X0=1
   -DHAL_DAC_MODULE_ONLY
   -DHAL_RNG_MODULE_ENABLED
-  -Wl,--wrap=__assert_func
-  -Wl,--wrap=strerror
-  -Wl,--wrap=_tzset_unlocked_r
 
 build_src_filter =
   ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp>
@@ -51,6 +48,7 @@ debug_tool = stlink
 lib_deps =
   ${env.lib_deps}
   ${radiolib_base.lib_deps}
+
   # renovate: datasource=git-refs depName=caveman99-stm32-Crypto packageName=https://github.com/caveman99/Crypto gitBranch=main
   https://github.com/caveman99/Crypto/archive/1aa30eb536bd52a576fde6dfa393bf7349cf102d.zip
 

bin/analyze_map.py

@@ -1,165 +0,0 @@
-#!/usr/bin/env python3
-"""Summarise linker map output to highlight heavy object files and libraries.
-
-Usage:
-    python bin/analyze_map.py --map .pio/build/rak4631/output.map --top 20
-
-The script parses GNU ld map files and aggregates section sizes per object file
-and per archive/library, then prints sortable tables that make it easy to spot
-modules worth trimming or hiding behind feature flags.
-"""
-from __future__ import annotations
-
-import argparse
-import collections
-import os
-import re
-import sys
-from typing import DefaultDict, Dict, Tuple
-
-
-SECTION_LINE_RE = re.compile(r"^\s+(?P<section>\S+)\s+0x[0-9A-Fa-f]+\s+0x(?P<size>[0-9A-Fa-f]+)\s+(?P<object>.+)$")
-ARCHIVE_MEMBER_RE = re.compile(r"^(?P<archive>.+)\((?P<object>[^)]+)\)$")
-
-
-def human_size(num_bytes: int) -> str:
-    """Return a friendly size string with one decimal place."""
-    if num_bytes < 1024:
-        return f"{num_bytes:,} B"
-    num = float(num_bytes)
-    for unit in ("KB", "MB", "GB"):
-        num /= 1024.0
-        if num < 1024.0:
-            return f"{num:.1f} {unit}"
-    return f"{num:.1f} TB"
-
-
-def shorten_path(path: str, root: str) -> str:
-    """Prefer repository-relative paths for readability."""
-    path = path.strip()
-    if not path:
-        return path
-
-    # Normalise Windows archives (backslashes) to POSIX style for consistency.
-    path = path.replace("\\", "/")
-
-    # Attempt to strip the root when an absolute path lives inside the repo.
-    if os.path.isabs(path):
-        try:
-            rel = os.path.relpath(path, root)
-            if not rel.startswith(".."):
-                return rel
-        except ValueError:
-            # relpath can fail on mixed drives on Windows; fall back to basename.
-            pass
-    return path
-
-
-def describe_object(raw_object: str, root: str) -> Tuple[str, str]:
-    """Return a human friendly object label and the library it belongs to."""
-    raw_object = raw_object.strip()
-    lib_label = "[app]"
-    match = ARCHIVE_MEMBER_RE.match(raw_object)
-    if match:
-        archive = shorten_path(match.group("archive"), root)
-        obj = match.group("object")
-        lib_label = os.path.basename(archive) or archive
-        label = f"{archive}:{obj}"
-    else:
-        label = shorten_path(raw_object, root)
-        # If the object lives under libs, hint at the containing directory.
-        parent = os.path.basename(os.path.dirname(label))
-        if parent:
-            lib_label = parent
-    return label, lib_label
-
-
-def parse_map(map_path: str, repo_root: str) -> Tuple[Dict[str, int], Dict[str, int], Dict[str, Dict[str, int]]]:
-    per_object: DefaultDict[str, int] = collections.defaultdict(int)
-    per_library: DefaultDict[str, int] = collections.defaultdict(int)
-    per_object_sections: DefaultDict[str, DefaultDict[str, int]] = collections.defaultdict(lambda: collections.defaultdict(int))
-
-    try:
-        with open(map_path, "r", encoding="utf-8", errors="ignore") as handle:
-            for line in handle:
-                match = SECTION_LINE_RE.match(line)
-                if not match:
-                    continue
-
-                section = match.group("section")
-                if section.startswith("*") or section in {"LOAD", "ORIGIN"}:
-                    continue
-
-                size = int(match.group("size"), 16)
-                if size == 0:
-                    continue
-
-                obj_token = match.group("object").strip()
-                if not obj_token or obj_token.startswith("*") or "load address" in obj_token:
-                    continue
-
-                label, lib_label = describe_object(obj_token, repo_root)
-                per_object[label] += size
-                per_library[lib_label] += size
-                per_object_sections[label][section] += size
-    except FileNotFoundError:
-        raise SystemExit(f"error: map file '{map_path}' not found. Run a build first.")
-
-    return per_object, per_library, per_object_sections
-
-
-def format_section_breakdown(section_sizes: Dict[str, int], total: int, limit: int = 3) -> str:
-    items = sorted(section_sizes.items(), key=lambda kv: kv[1], reverse=True)
-    parts = []
-    for section, size in items[:limit]:
-        pct = (size / total) * 100 if total else 0
-        parts.append(f"{section} {pct:.1f}%")
-    if len(items) > limit:
-        remainder = total - sum(size for _, size in items[:limit])
-        pct = (remainder / total) * 100 if total else 0
-        parts.append(f"other {pct:.1f}%")
-    return ", ".join(parts)
-
-
-def print_report(map_path: str, top_n: int, per_object: Dict[str, int], per_library: Dict[str, int], per_object_sections: Dict[str, Dict[str, int]]):
-    total_bytes = sum(per_object.values())
-    if total_bytes == 0:
-        print("No section data found in map file.")
-        return
-
-    print(f"Map file: {map_path}")
-    print(f"Accounted size: {human_size(total_bytes)} across {len(per_object)} object files\n")
-
-    sorted_objects = sorted(per_object.items(), key=lambda kv: kv[1], reverse=True)
-    print(f"Top {min(top_n, len(sorted_objects))} object files by linked size:")
-    for idx, (obj, size) in enumerate(sorted_objects[:top_n], 1):
-        pct = (size / total_bytes) * 100
-        breakdown = format_section_breakdown(per_object_sections[obj], size)
-        print(f"{idx:2}. {human_size(size):>9}  ({size:,} B, {pct:5.2f}% of linked size)")
-        print(f"    {obj}")
-        if breakdown:
-            print(f"    sections: {breakdown}")
-    print()
-
-    sorted_libs = sorted(per_library.items(), key=lambda kv: kv[1], reverse=True)
-    print(f"Top {min(top_n, len(sorted_libs))} libraries or source roots:")
-    for idx, (lib, size) in enumerate(sorted_libs[:top_n], 1):
-        pct = (size / total_bytes) * 100
-        print(f"{idx:2}. {human_size(size):>9}  ({size:,} B, {pct:5.2f}% of linked size)  {lib}")
-
-
-def main() -> None:
-    parser = argparse.ArgumentParser(description="Highlight heavy object files from a GNU ld map file.")
-    parser.add_argument("--map", default=".pio/build/rak4631/output.map", help="Path to the map file (default: %(default)s)")
-    parser.add_argument("--top", type=int, default=20, help="Number of entries to display per table (default: %(default)s)")
-    args = parser.parse_args()
-
-    map_path = os.path.abspath(args.map)
-    repo_root = os.path.abspath(os.getcwd())
-
-    per_object, per_library, per_object_sections = parse_map(map_path, repo_root)
-    print_report(os.path.relpath(map_path, repo_root), args.top, per_object, per_library, per_object_sections)
-
-
-if __name__ == "__main__":
-    main()

bin/build-esp32.sh

@@ -5,8 +5,7 @@ set -e
 VERSION=`bin/buildinfo.py long`
 SHORT_VERSION=`bin/buildinfo.py short`
 
-BUILDDIR=.pio/build/$1
+OUTDIR=release/
-OUTDIR=release
 
 rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
@@ -15,27 +14,33 @@ rm -r $OUTDIR/* || true
 platformio pkg install -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
-rm -f $BUILDDIR/firmware*
+rm -f .pio/build/$1/firmware.*
 
 # The shell vars the build tool expects to find
 export APP_VERSION=$VERSION
 
 basename=firmware-$1-$VERSION
 
-pio run --environment $1 -t mtjson # -v
+pio run --environment $1 # -v
-
+SRCELF=.pio/build/$1/firmware.elf
-cp $BUILDDIR/$basename.elf $OUTDIR/$basename.elf
+cp $SRCELF $OUTDIR/$basename.elf
 
 echo "Copying ESP32 bin file"
-cp $BUILDDIR/$basename.factory.bin $OUTDIR/$basename.factory.bin
+SRCBIN=.pio/build/$1/firmware.factory.bin
+cp $SRCBIN $OUTDIR/$basename.bin
 
 echo "Copying ESP32 update bin file"
-cp $BUILDDIR/$basename.bin $OUTDIR/$basename.bin
+SRCBIN=.pio/build/$1/firmware.bin
+cp $SRCBIN $OUTDIR/$basename-update.bin
 
-echo "Copying Filesystem for ESP32 targets"
+echo "Building Filesystem for ESP32 targets"
-cp $BUILDDIR/littlefs-$1-$VERSION.bin $OUTDIR/littlefs-$1-$VERSION.bin || true
+# If you want to build the webui, uncomment the following lines
-cp bin/device-install.* $OUTDIR/
+# pio run --environment $1 -t buildfs
-cp bin/device-update.* $OUTDIR/
+# cp .pio/build/$1/littlefs.bin $OUTDIR/littlefswebui-$1-$VERSION.bin
-
+# # Remove webserver files from the filesystem and rebuild
-echo "Copying manifest"
+# ls -l data/static # Diagnostic list of files
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json
+# rm -rf data/static
+pio run --environment $1 -t buildfs
+cp .pio/build/$1/littlefs.bin $OUTDIR/littlefs-$1-$VERSION.bin
+cp bin/device-install.* $OUTDIR
+cp bin/device-update.* $OUTDIR

bin/build-native.sh

@@ -17,19 +17,15 @@ VERSION=$(bin/buildinfo.py long)
 SHORT_VERSION=$(bin/buildinfo.py short)
 PIO_ENV=${1:-native}
 
-BUILDDIR=.pio/build/$PIO_ENV
+OUTDIR=release/
-OUTDIR=release
 
-rm -f $OUTDIR/meshtasticd*
+rm -f $OUTDIR/firmware*
 
 mkdir -p $OUTDIR/
 rm -r $OUTDIR/* || true
 
-basename=meshtasticd-$1-$VERSION
-
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
 pio pkg install --environment "$PIO_ENV" || platformioFailed
 pio run --environment "$PIO_ENV" || platformioFailed
-
+cp ".pio/build/$PIO_ENV/program" "$OUTDIR/meshtasticd_linux_$(uname -m)"
-cp "$BUILDDIR/meshtasticd" "$OUTDIR/meshtasticd_linux_$(uname -m)"
+cp bin/native-install.* $OUTDIR
-cp bin/native-install.* $OUTDIR/

bin/build-nrf52.sh

@@ -5,8 +5,7 @@ set -e
 VERSION=$(bin/buildinfo.py long)
 SHORT_VERSION=$(bin/buildinfo.py short)
 
-BUILDDIR=.pio/build/$1
+OUTDIR=release/
-OUTDIR=release
 
 rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
@@ -15,38 +14,40 @@ rm -r $OUTDIR/* || true
 platformio pkg install -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
-rm -f $BUILDDIR/firmware*
+rm -f .pio/build/$1/firmware.*
 
 # The shell vars the build tool expects to find
 export APP_VERSION=$VERSION
 
 basename=firmware-$1-$VERSION
-ota_basename=${basename}-ota
 
-pio run --environment $1 -t mtjson # -v
+pio run --environment $1 # -v
+SRCELF=.pio/build/$1/firmware.elf
+cp $SRCELF $OUTDIR/$basename.elf
 
-cp $BUILDDIR/$basename.elf $OUTDIR/$basename.elf
+echo "Generating NRF52 dfu file"
+DFUPKG=.pio/build/$1/firmware.zip
+cp $DFUPKG $OUTDIR/$basename-ota.zip
 
-echo "Copying NRF52 dfu (OTA) file"
+echo "Generating NRF52 uf2 file"
-cp $BUILDDIR/$basename.zip $OUTDIR/$ota_basename.zip
+SRCHEX=.pio/build/$1/firmware.hex
 
-echo "Copying NRF52 UF2 file"
+# if WM1110 target, merge hex with softdevice 7.3.0
-cp $BUILDDIR/$basename.uf2 $OUTDIR/$basename.uf2
-cp bin/*.uf2 $OUTDIR/
-
-SRCHEX=$BUILDDIR/$basename.hex
-
-# if WM1110 target, copy the merged.hex
 if (echo $1 | grep -q "wio-sdk-wm1110"); then
-	echo "Copying .merged.hex file"
+	echo "Merging with softdevice"
-	SRCHEX=$BUILDDIR/$basename.merged.hex
+	bin/mergehex -m bin/s140_nrf52_7.3.0_softdevice.hex $SRCHEX -o .pio/build/$1/$basename.hex
-	cp $SRCHEX $OUTDIR/
+	SRCHEX=.pio/build/$1/$basename.hex
+	bin/uf2conv.py $SRCHEX -c -o $OUTDIR/$basename.uf2 -f 0xADA52840
+	cp $SRCHEX $OUTDIR
+	cp bin/*.uf2 $OUTDIR
+else
+	bin/uf2conv.py $SRCHEX -c -o $OUTDIR/$basename.uf2 -f 0xADA52840
+	cp bin/device-install.* $OUTDIR
+	cp bin/device-update.* $OUTDIR
+	cp bin/*.uf2 $OUTDIR
 fi
 
 if (echo $1 | grep -q "rak4631"); then
-	echo "Copying .hex file"
+	echo "Copying hex file"
-	cp $SRCHEX $OUTDIR/
+	cp .pio/build/$1/firmware.hex $OUTDIR/$basename.hex
-fi
+fi
-
-echo "Copying manifest"
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json

bin/build-rp2xx0.sh

@@ -5,8 +5,7 @@ set -e
 VERSION=`bin/buildinfo.py long`
 SHORT_VERSION=`bin/buildinfo.py short`
 
-BUILDDIR=.pio/build/$1
+OUTDIR=release/
-OUTDIR=release
 
 rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
@@ -15,19 +14,20 @@ rm -r $OUTDIR/* || true
 platformio pkg install -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
-rm -f $BUILDDIR/firmware*
+rm -f .pio/build/$1/firmware.*
 
 # The shell vars the build tool expects to find
 export APP_VERSION=$VERSION
 
 basename=firmware-$1-$VERSION
 
-pio run --environment $1 -t mtjson # -v
+pio run --environment $1 # -v
-
+SRCELF=.pio/build/$1/firmware.elf
-cp $BUILDDIR/$basename.elf $OUTDIR/$basename.elf
+cp $SRCELF $OUTDIR/$basename.elf
 
 echo "Copying uf2 file"
-cp $BUILDDIR/$basename.uf2 $OUTDIR/$basename.uf2
+SRCBIN=.pio/build/$1/firmware.uf2
+cp $SRCBIN $OUTDIR/$basename.uf2
 
-echo "Copying manifest"
+cp bin/device-install.* $OUTDIR
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json
+cp bin/device-update.* $OUTDIR

bin/build-stm32wl.sh

@@ -5,8 +5,7 @@ set -e
 VERSION=$(bin/buildinfo.py long)
 SHORT_VERSION=$(bin/buildinfo.py short)
 
-BUILDDIR=.pio/build/$1
+OUTDIR=release/
-OUTDIR=release
 
 rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
@@ -15,19 +14,16 @@ rm -r $OUTDIR/* || true
 platformio pkg install -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
-rm -f $BUILDDIR/firmware*
+rm -f .pio/build/$1/firmware.*
 
 # The shell vars the build tool expects to find
 export APP_VERSION=$VERSION
 
 basename=firmware-$1-$VERSION
 
-pio run --environment $1 -t mtjson # -v
+pio run --environment $1 # -v
+SRCELF=.pio/build/$1/firmware.elf
+cp $SRCELF $OUTDIR/$basename.elf
 
-cp $BUILDDIR/$basename.elf $OUTDIR/$basename.elf
+SRCBIN=.pio/build/$1/firmware.bin
-
+cp $SRCBIN $OUTDIR/$basename.bin
-echo "Copying STM32 bin file"
-cp $BUILDDIR/$basename.bin $OUTDIR/$basename.bin
-
-echo "Copying manifest"
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json

bin/config-dist.yaml

@@ -184,8 +184,6 @@ Input:
 Logging:
   LogLevel: info # debug, info, warn, error
 #  TraceFile: /var/log/meshtasticd.json
-#  JSONFile: /packets.json # File location for JSON output of decoded packets
-#  JSONFilter: position # filter for packets to save to JSON file
 #  AsciiLogs: true     # default if not specified is !isatty() on stdout
 
 Webserver:

bin/device-install.bat

@@ -5,14 +5,22 @@ TITLE Meshtastic device-install
 SET "SCRIPT_NAME=%~nx0"
 SET "DEBUG=0"
 SET "PYTHON="
+SET "TFT_BUILD=0"
+SET "BIGDB8=0"
+SET "MUIDB8=0"
+SET "BIGDB16=0"
 SET "ESPTOOL_BAUD=115200"
 SET "ESPTOOL_CMD="
 SET "LOGCOUNTER=0"
 SET "BPS_RESET=0"
-@REM Default offsets.
+
-@REM https://github.com/meshtastic/web-flasher/blob/main/stores/firmwareStore.ts#L202
+@REM FIXME: Determine mcu from PlatformIO variant, this is unmaintainable.
-SET "OTA_OFFSET=0x260000"
+SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone t-eth-elite tlora-pager mesh-tab dreamcatcher ESP32-S3-Pico seeed-sensecap-indicator heltec_capsule_sensor_v3 vision-master icarus tracksenger elecrow-adv heltec-v4"
-SET "SPIFFS_OFFSET=0x300000"
+SET "C3=esp32c3"
+@REM FIXME: Determine flash size from PlatformIO variant, this is unmaintainable.
+SET "BIGDB_8MB=crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core tracksenger"
+SET "MUIDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator"
+SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite tlora-pager t-watch-s3 elecrow-adv heltec-v4"
 
 GOTO getopts
 :help
@@ -21,7 +29,7 @@ ECHO.
 ECHO Usage: %SCRIPT_NAME% -f filename [-p PORT] [-P python] [--1200bps-reset]
 ECHO.
 ECHO Options:
-ECHO     -f filename      The firmware .factory.bin file to flash.  Custom to your device type and region. (required)
+ECHO     -f filename      The firmware .bin file to flash.  Custom to your device type and region. (required)
 ECHO                      The file must be located in this current directory.
 ECHO     -p PORT          Set the environment variable for ESPTOOL_PORT.
 ECHO                      If not set, ESPTOOL iterates all ports (Dangerous).
@@ -32,12 +40,12 @@ ECHO     --1200bps-reset  Attempt to place the device in correct mode. (1200bps
 ECHO                      Some hardware requires this twice.
 ECHO.
 ECHO Example: %SCRIPT_NAME% -p COM17 --1200bps-reset
-ECHO Example: %SCRIPT_NAME% -f firmware-t-deck-tft-2.6.0.0b106d4.factory.bin -p COM11
+ECHO Example: %SCRIPT_NAME% -f firmware-t-deck-tft-2.6.0.0b106d4.bin -p COM11
-ECHO Example: %SCRIPT_NAME% -f firmware-unphone-2.6.0.0b106d4.factory.bin -p COM11
+ECHO Example: %SCRIPT_NAME% -f firmware-unphone-2.6.0.0b106d4.bin -p COM11
 GOTO eof
 
 :version
-ECHO %SCRIPT_NAME% [Version 2.7.0]
+ECHO %SCRIPT_NAME% [Version 2.6.2]
 ECHO Meshtastic
 GOTO eof
 
@@ -70,8 +78,8 @@ IF "__!FILENAME!__"=="____" (
         CALL :LOG_MESSAGE ERROR "Filename containing spaces are not supported."
         GOTO help
     )
-    IF NOT "__!FILENAME:.factory.bin=!__"=="__!FILENAME!__" (
+    IF "__!FILENAME:firmware-=!__"=="__!FILENAME!__" (
-        CALL :LOG_MESSAGE ERROR "Filename must be a firmware-*.factory.bin file."
+        CALL :LOG_MESSAGE ERROR "Filename must be a firmware-* file."
         GOTO help
     )
     @REM Remove ".\" or "./" file prefix if present.
@@ -85,26 +93,12 @@ IF NOT EXIST !FILENAME! (
     GOTO eof
 )
 
-CALL :LOG_MESSAGE DEBUG "Checking for metadata..."
+IF NOT "!FILENAME:update=!"=="!FILENAME!" (
-@REM Derive metadata filename from firmware filename.
+    CALL :LOG_MESSAGE DEBUG "We are working with a *update* file. !FILENAME!"
-SET "METAFILE=!FILENAME:.factory.bin=!.mt.json"
+    CALL :LOG_MESSAGE INFO "Use script device-update.bat to flash update !FILENAME!."
-IF EXIST !METAFILE! (
-    @REM Print parsed json with powershell
-    CALL :LOG_MESSAGE INFO "Firmware metadata: !METAFILE!"
-    powershell -NoProfile -Command "(Get-Content '!METAFILE!' | ConvertFrom-Json | Out-String).Trim()"
-
-    @REM Save metadata values to variables for later use.
-    FOR /f "usebackq" %%A IN (`powershell -NoProfile -Command ^
-        "(Get-Content '!METAFILE!' | ConvertFrom-Json).mcu"`) DO SET "MCU=%%A"
-    FOR /f "usebackq" %%A IN (`powershell -NoProfile -Command ^
-        "(Get-Content '!METAFILE!' | ConvertFrom-Json).part | Where-Object { $_.subtype -eq 'ota_1' } | Select-Object -ExpandProperty offset"`
-    ) DO SET "OTA_OFFSET=%%A"
-    FOR /f "usebackq" %%A IN (`powershell -NoProfile -Command ^
-        "(Get-Content '!METAFILE!' | ConvertFrom-Json).part | Where-Object { $_.subtype -eq 'spiffs' } | Select-Object -ExpandProperty offset"`
-    ) DO SET "SPIFFS_OFFSET=%%A"
-) ELSE (
-    CALL :LOG_MESSAGE ERROR "No metadata file found: !METAFILE!"
     GOTO eof
+) ELSE (
+    CALL :LOG_MESSAGE DEBUG "We are NOT working with a *update* file. !FILENAME!"
 )
 
 :skip-filename
@@ -114,7 +108,7 @@ IF NOT "__%PYTHON%__"=="____" (
     SET "ESPTOOL_CMD=!PYTHON! -m esptool"
     CALL :LOG_MESSAGE DEBUG "Python interpreter supplied."
 ) ELSE (
-    CALL :LOG_MESSAGE DEBUG "Python interpreter NOT supplied. Looking for esptool..."
+    CALL :LOG_MESSAGE DEBUG "Python interpreter NOT supplied. Looking for esptool...
     WHERE esptool >nul 2>&1
     IF %ERRORLEVEL% EQU 0 (
         @REM WHERE exits with code 0 if esptool is found.
@@ -152,26 +146,100 @@ IF %BPS_RESET% EQU 1 (
     GOTO eof
 )
 
-@REM Extract PROGNAME from %FILENAME% for later use.
+@REM Check if FILENAME contains "-tft-" and set target partitionScheme accordingly.
-SET "PROGNAME=!FILENAME:.factory.bin=!"
+@REM https://github.com/meshtastic/web-flasher/blob/main/types/resources.ts#L3
-CALL :LOG_MESSAGE DEBUG "Computed PROGNAME: !PROGNAME!"
+IF NOT "!FILENAME:-tft-=!"=="!FILENAME!" (
-
+    CALL :LOG_MESSAGE DEBUG "We are working with a *-tft-* file. !FILENAME!"
-IF "__!MCU!__" == "__esp32s3__" (
+    SET "TFT_BUILD=1"
-    @REM We are working with ESP32-S3
-    SET "OTA_FILENAME=bleota-s3.bin"
-) ELSE IF "__!MCU!__" == "__esp32c3__" (
-    @REM We are working with ESP32-C3
-    SET "OTA_FILENAME=bleota-c3.bin"
 ) ELSE (
-    @REM Everything else
+    CALL :LOG_MESSAGE DEBUG "We are NOT working with a *-tft-* file. !FILENAME!"
-    SET "OTA_FILENAME=bleota.bin"
 )
+
+FOR %%a IN (%BIGDB_8MB%) DO (
+    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
+        @REM We are working with any of %BIGDB_8MB%.
+        SET "BIGDB8=1"
+        GOTO end_loop_bigdb_8mb
+    )
+)
+:end_loop_bigdb_8mb
+
+FOR %%a IN (%MUIDB_8MB%) DO (
+    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
+        @REM We are working with any of %MUIDB_8MB%.
+        SET "MUIDB8=1"
+        GOTO end_loop_muidb_8mb
+    )
+)
+:end_loop_muidb_8mb
+
+FOR %%a IN (%BIGDB_16MB%) DO (
+    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
+        @REM We are working with any of %BIGDB_16MB%.
+        SET "BIGDB16=1"
+        GOTO end_loop_bigdb_16mb
+    )
+)
+:end_loop_bigdb_16mb
+
+IF %BIGDB8% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 8mb partition selected."
+IF %MUIDB8% EQU 1 CALL :LOG_MESSAGE INFO "MUIDB 8mb partition selected."
+IF %BIGDB16% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 16mb partition selected."
+
+@REM Extract BASENAME from %FILENAME% for later use.
+SET "BASENAME=!FILENAME:firmware-=!"
+CALL :LOG_MESSAGE DEBUG "Computed firmware basename: !BASENAME!"
+
+@REM Account for S3 and C3 board's different OTA partition.
+FOR %%a IN (%S3%) DO (
+    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
+        @REM We are working with any of %S3%.
+        SET "OTA_FILENAME=bleota-s3.bin"
+        GOTO :end_loop_s3
+    )
+)
+
+FOR %%a IN (%C3%) DO (
+    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
+        @REM We are working with any of %C3%.
+        SET "OTA_FILENAME=bleota-c3.bin"
+        GOTO :end_loop_c3
+    )
+)
+
+@REM Everything else
+SET "OTA_FILENAME=bleota.bin"
+:end_loop_s3
+:end_loop_c3
 CALL :LOG_MESSAGE DEBUG "Set OTA_FILENAME to: !OTA_FILENAME!"
 
 @REM Set SPIFFS filename with "littlefs-" prefix.
-SET "SPIFFS_FILENAME=littlefs-!PROGNAME:firmware-=!.bin"
+SET "SPIFFS_FILENAME=littlefs-%BASENAME%"
 CALL :LOG_MESSAGE DEBUG "Set SPIFFS_FILENAME to: !SPIFFS_FILENAME!"
 
+@REM Default offsets.
+@REM https://github.com/meshtastic/web-flasher/blob/main/stores/firmwareStore.ts#L202
+SET "OTA_OFFSET=0x260000"
+SET "SPIFFS_OFFSET=0x300000"
+
+@REM Offsets for BigDB 8mb.
+IF %BIGDB8% EQU 1 (
+    SET "OTA_OFFSET=0x340000"
+    SET "SPIFFS_OFFSET=0x670000"
+)
+
+@REM Offsets for MUIDB 8mb.
+IF %MUIDB8% EQU 1 (
+    SET "OTA_OFFSET=0x5D0000"
+    SET "SPIFFS_OFFSET=0x670000"
+)
+
+@REM Offsets for BigDB 16mb.
+IF %BIGDB16% EQU 1 (
+    SET "OTA_OFFSET=0x650000"
+    SET "SPIFFS_OFFSET=0xc90000"
+)
+
 CALL :LOG_MESSAGE DEBUG "Set OTA_OFFSET to: !OTA_OFFSET!"
 CALL :LOG_MESSAGE DEBUG "Set SPIFFS_OFFSET to: !SPIFFS_OFFSET!"
 

bin/device-install.sh

@@ -2,15 +2,69 @@
 
 PYTHON=${PYTHON:-$(which python3 python | head -n 1)}
 BPS_RESET=false
+TFT_BUILD=false
 MCU=""
 
 # Constants
 RESET_BAUD=1200
 FIRMWARE_OFFSET=0x00
-# Default littlefs* offset.
+
-OFFSET=0x300000
+# Variant groups
-# Default OTA Offset
+BIGDB_8MB=(
-OTA_OFFSET=0x260000
+    "crowpanel-esp32s3"
+    "heltec_capsule_sensor_v3"
+    "heltec-v3"
+    "heltec-vision-master-e213"
+    "heltec-vision-master-e290"
+    "heltec-vision-master-t190"
+    "heltec-wireless-paper"
+    "heltec-wireless-tracker"
+    "heltec-wsl-v3"
+    "icarus"
+    "seeed-xiao-s3"
+    "tbeam-s3-core"
+    "tracksenger"
+)
+MUIDB_8MB=(
+    "picomputer-s3"
+    "unphone"
+    "seeed-sensecap-indicator"
+)
+BIGDB_16MB=(
+    "dreamcatcher"
+    "elecrow-adv"
+    "ESP32-S3-Pico"
+    "heltec-v4"
+    "m5stack-cores3"
+    "mesh-tab"
+    "station-g2"
+    "t-deck"
+    "t-energy-s3"
+    "t-eth-elite"
+    "t-watch-s3"
+    "tlora-pager"
+)
+S3_VARIANTS=(
+    "s3"
+    "-v3"
+    "-v4"
+    "t-deck"
+    "wireless-paper"
+    "wireless-tracker"
+    "station-g2"
+    "unphone"
+    "t-eth-elite"
+    "tlora-pager"
+    "mesh-tab"
+    "dreamcatcher"
+    "ESP32-S3-Pico"
+    "seeed-sensecap-indicator"
+    "heltec_capsule_sensor_v3"
+    "vision-master"
+    "icarus"
+    "tracksenger"
+    "elecrow-adv"
+)
 
 # Determine the correct esptool command to use
 if "$PYTHON" -m esptool version >/dev/null 2>&1; then
@@ -24,14 +78,6 @@ else
     exit 1
 fi
 
-# Check for jq
-if ! command -v jq >/dev/null 2>&1; then
-    echo "Error: jq not found" >&2
-    echo "Install jq with your package manager." >&2
-    echo "e.g. 'apt install jq', 'dnf install jq', 'brew install jq', etc." >&2
-    exit 1
-fi
-
 set -e
 
 # Usage info
@@ -43,7 +89,7 @@ Flash image file to device, but first erasing and writing system information.
     -h               Display this help and exit.
     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
-    -f FILENAME      The firmware *.factory.bin file to flash.  Custom to your device type and region.
+    -f FILENAME      The firmware .bin file to flash.  Custom to your device type and region.
     --1200bps-reset  Attempt to place the device in correct mode. Some hardware requires this twice. (1200bps Reset)
 
 EOF
@@ -92,43 +138,69 @@ fi
     shift
 }
 
-if [[ $(basename "$FILENAME") != firmware-*.factory.bin ]]; then
+if [[ "$FILENAME" != firmware-* ]]; then
-  echo "Filename must be a firmware-*.factory.bin file."
+  echo "Filename must be a firmware-* file."
   exit 1
 fi
 
-# Extract PROGNAME from %FILENAME% for later use.
+# Check if FILENAME contains "-tft-" and set target partitionScheme accordingly.
-PROGNAME="${FILENAME/.factory.bin/}"
+if [[ "${FILENAME//-tft-/}" != "$FILENAME" ]]; then
-# Derive metadata filename from %PROGNAME%.
+    TFT_BUILD=true
-METAFILE="${PROGNAME}.mt.json"
+fi
 
-if [[ -f "$FILENAME" && "$FILENAME" == *.factory.bin ]]; then
+# Extract BASENAME from %FILENAME% for later use.
-    # Display metadata if it exists
+BASENAME="${FILENAME/firmware-/}"
-    if [[ -f "$METAFILE" ]]; then
+
-        echo "Firmware metadata: ${METAFILE}"
+if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
-        jq . "$METAFILE"
+    # Default littlefs* offset.
-        # Extract relevant fields from metadata
+    OFFSET=0x300000
-        if [[ $(jq -r '.part' "$METAFILE") != "null" ]]; then
+
-            OTA_OFFSET=$(jq -r '.part[] | select(.subtype == "ota_1") | .offset' "$METAFILE")
+    # Default OTA Offset
-            SPIFFS_OFFSET=$(jq -r '.part[] | select(.subtype == "spiffs") | .offset' "$METAFILE")
+    OTA_OFFSET=0x260000
+
+    # littlefs* offset for BigDB 8mb and OTA OFFSET.
+    for variant in "${BIGDB_8MB[@]}"; do
+        if [ -z "${FILENAME##*"$variant"*}" ]; then
+            OFFSET=0x670000
+            OTA_OFFSET=0x340000
         fi
-        MCU=$(jq -r '.mcu' "$METAFILE")
+    done
-    else
-        echo "ERROR: No metadata file found at ${METAFILE}"
-        exit 1
-    fi
 
-    # Determine OTA filename based on MCU type
+    for variant in "${MUIDB_8MB[@]}"; do
-    if [ "$MCU" == "esp32s3" ]; then
+        if [ -z "${FILENAME##*"$variant"*}" ]; then
-        OTAFILE=bleota-s3.bin
+            OFFSET=0x670000
-    elif [ "$MCU" == "esp32c3" ]; then
+            OTA_OFFSET=0x5D0000
-        OTAFILE=bleota-c3.bin
+        fi
+    done
+
+    # littlefs* offset for BigDB 16mb and OTA OFFSET.
+    for variant in "${BIGDB_16MB[@]}"; do
+        if [ -z "${FILENAME##*"$variant"*}" ]; then
+            OFFSET=0xc90000
+            OTA_OFFSET=0x650000
+        fi
+    done
+
+    # Account for S3 board's different OTA partition
+    # FIXME: Use PlatformIO info to determine MCU type, this is unmaintainable
+    for variant in "${S3_VARIANTS[@]}"; do
+        if [ -z "${FILENAME##*"$variant"*}" ]; then
+            MCU="esp32s3"
+        fi
+    done
+
+    if [ "$MCU" != "esp32s3" ]; then
+        if [ -n "${FILENAME##*"esp32c3"*}" ]; then
+            OTAFILE=bleota.bin
+        else
+            OTAFILE=bleota-c3.bin
+        fi
     else
-        OTAFILE=bleota.bin
+        OTAFILE=bleota-s3.bin
     fi
 
     # Set SPIFFS filename with "littlefs-" prefix.
-    SPIFFSFILE="littlefs-${PROGNAME/firmware-/}.bin"
+    SPIFFSFILE=littlefs-${BASENAME}
 
     if [[ ! -f "$FILENAME" ]]; then
         echo "Error: file ${FILENAME} wasn't found. Terminating."

bin/device-update.bat

@@ -30,11 +30,11 @@ ECHO     --change-mode    Attempt to place the device in correct mode. (1200bps
 ECHO                      Some hardware requires this twice.
 ECHO.
 ECHO Example: %SCRIPT_NAME% -p COM17 --change-mode
-ECHO Example: %SCRIPT_NAME% -f firmware-t-deck-tft-2.6.0.0b106d4.bin -p COM11
+ECHO Example: %SCRIPT_NAME% -f firmware-t-deck-tft-2.6.0.0b106d4-update.bin -p COM11
 GOTO eof
 
 :version
-ECHO %SCRIPT_NAME% [Version 2.7.0]
+ECHO %SCRIPT_NAME% [Version 2.6.2]
 ECHO Meshtastic
 GOTO eof
 
@@ -78,12 +78,12 @@ IF NOT EXIST !FILENAME! (
     GOTO eof
 )
 
-IF NOT "__!FILENAME:.factory.bin=!__"=="__!FILENAME!__" (
+IF "!FILENAME:update=!"=="!FILENAME!" (
-    CALL :LOG_MESSAGE DEBUG "We are working with a *.factory.bin* file. !FILENAME!"
+    CALL :LOG_MESSAGE DEBUG "We are NOT working with a *update* file. !FILENAME!"
     CALL :LOG_MESSAGE INFO "Use script device-install.bat to flash !FILENAME!."
     GOTO eof
 ) ELSE (
-    CALL :LOG_MESSAGE DEBUG "We are not working with a *.factory.bin* file. !FILENAME!"
+    CALL :LOG_MESSAGE DEBUG "We are working with a *update* file. !FILENAME!"
 )
 
 :skip-filename

bin/device-update.sh

@@ -29,7 +29,7 @@ Flash image file to device, leave existing system intact."
     -h               Display this help and exit
     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
-    -f FILENAME      The *.bin file to flash.  Custom to your device type.
+    -f FILENAME      The *update.bin file to flash.  Custom to your device type.
     --change-mode    Attempt to place the device in correct mode. Some hardware requires this twice. (1200bps Reset)
 
 EOF
@@ -78,7 +78,7 @@ fi
     shift
 }
 
-if [[ -f "$FILENAME" && "$FILENAME" != *.factory.bin ]]; then
+if [ -f "${FILENAME}" ] && [ -z "${FILENAME##*"update"*}" ]; then
     echo "Trying to flash update ${FILENAME}"
     $ESPTOOL_CMD --baud $FLASH_BAUD write-flash $UPDATE_OFFSET "${FILENAME}"
 else

bin/exception_decoder.py

@@ -75,7 +75,7 @@ TOOLS = {
 }
 
 BACKTRACE_REGEX = re.compile(
-    r"\b(0x4[0-9a-fA-F]{7,8}):0x[0-9a-fA-F]{8}\b"
+    r"(?:\s+(0x40[0-2](?:\d|[a-f]|[A-F]){5}):0x(?:\d|[a-f]|[A-F]){8})\b"
 )
 EXCEPTION_REGEX = re.compile("^Exception \\((?P<exc>[0-9]*)\\):$")
 COUNTER_REGEX = re.compile(
@@ -89,7 +89,7 @@ POINTER_REGEX = re.compile(
 STACK_BEGIN = ">>>stack>>>"
 STACK_END = "<<<stack<<<"
 STACK_REGEX = re.compile(
-    r"^(?P<off>[0-9a-f]+):\W+(?P<c1>[0-9a-f]+) (?P<c2>[0-9a-f]+) (?P<c3>[0-9a-f]+) (?P<c4>[0-9a-f]+)(\W.*)?$"
+    "^(?P<off>[0-9a-f]+):\W+(?P<c1>[0-9a-f]+) (?P<c2>[0-9a-f]+) (?P<c3>[0-9a-f]+) (?P<c4>[0-9a-f]+)(\W.*)?$"
 )
 
 StackLine = namedtuple("StackLine", ["offset", "content"])
@@ -223,7 +223,7 @@ class AddressResolver(object):
             if match is None:
                 if last is not None and line.startswith("(inlined by)"):
                     line = line[12:].strip()
-                    self._address_map[last] += "\n  \\-> inlined by: " + line
+                    self._address_map[last] += "\n  \-> inlined by: " + line
                 continue
 
             if match.group("result") == "?? ??:0":

bin/native-gdbserver.sh

@@ -2,4 +2,4 @@
 
 set -e
 pio run --environment native
-gdbserver --once localhost:2345 .pio/build/native/meshtasticd "$@"
+gdbserver --once localhost:2345 .pio/build/native/program "$@"

bin/native-run.sh

@@ -2,4 +2,4 @@
 
 set -e
 pio run --environment native
-.pio/build/native/meshtasticd "$@"
+.pio/build/native/program "$@"

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,15 +87,6 @@
   </screenshots>
 
   <releases>
-    <release version="2.7.18" date="2026-01-02">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.18</url>
-    </release>
-    <release version="2.7.17" date="2025-11-28">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.17</url>
-    </release>
-    <release version="2.7.16" date="2025-11-19">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.16</url>
-    </release>
     <release version="2.7.15" date="2025-11-13">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.15</url>
     </release>

bin/platformio-custom.py

@@ -2,82 +2,98 @@
 # trunk-ignore-all(ruff/F821)
 # trunk-ignore-all(flake8/F821): For SConstruct imports
 import sys
-from os.path import join, basename, isfile
+from os.path import join
 import subprocess
 import json
 import re
+import time
 from datetime import datetime
 
 from readprops import readProps
 
 Import("env")
 platform = env.PioPlatform()
-progname = env.get("PROGNAME")
-lfsbin = f"{progname.replace('firmware-', 'littlefs-')}.bin"
 
-def manifest_gather(source, target, env):
+
-    out = []
+def esp32_create_combined_bin(source, target, env):
-    board_platform = env.BoardConfig().get("platform")
+    # this sub is borrowed from ESPEasy build toolchain. It's licensed under GPL V3
-    needs_ota_suffix = board_platform == "nordicnrf52"
+    # https://github.com/letscontrolit/ESPEasy/blob/mega/tools/pio/post_esp32.py
-    check_paths = [
+    print("Generating combined binary for serial flashing")
-        progname,
+
-        f"{progname}.elf",
+    app_offset = 0x10000
-        f"{progname}.bin",
+
-        f"{progname}.factory.bin",
+    new_file_name = env.subst("$BUILD_DIR/${PROGNAME}.factory.bin")
-        f"{progname}.hex",
+    sections = env.subst(env.get("FLASH_EXTRA_IMAGES"))
-        f"{progname}.merged.hex",
+    firmware_name = env.subst("$BUILD_DIR/${PROGNAME}.bin")
-        f"{progname}.uf2",
+    chip = env.get("BOARD_MCU")
-        f"{progname}.factory.uf2",
+    flash_size = env.BoardConfig().get("upload.flash_size")
-        f"{progname}.zip",
+    flash_freq = env.BoardConfig().get("build.f_flash", "40m")
-        lfsbin
+    flash_freq = flash_freq.replace("000000L", "m")
+    flash_mode = env.BoardConfig().get("build.flash_mode", "dio")
+    memory_type = env.BoardConfig().get("build.arduino.memory_type", "qio_qspi")
+    if flash_mode == "qio" or flash_mode == "qout":
+        flash_mode = "dio"
+    if memory_type == "opi_opi" or memory_type == "opi_qspi":
+        flash_mode = "dout"
+    cmd = [
+        "--chip",
+        chip,
+        "merge_bin",
+        "-o",
+        new_file_name,
+        "--flash_mode",
+        flash_mode,
+        "--flash_freq",
+        flash_freq,
+        "--flash_size",
+        flash_size,
     ]
-    for p in check_paths:
-        f = env.File(env.subst(f"$BUILD_DIR/{p}"))
-        if f.exists():
-            manifest_name = p
-            if needs_ota_suffix and p == f"{progname}.zip":
-                manifest_name = f"{progname}-ota.zip"
-            d = {
-                "name": manifest_name,
-                "md5": f.get_content_hash(), # Returns MD5 hash
-                "bytes": f.get_size() # Returns file size in bytes
-            }
-            out.append(d)
-            print(d)
-    manifest_write(out, env)
 
-def manifest_write(files, env):
+    print("    Offset | File")
-    manifest = {
+    for section in sections:
-        "version": verObj["long"],
+        sect_adr, sect_file = section.split(" ", 1)
-        "build_epoch": build_epoch,
+        print(f" -  {sect_adr} | {sect_file}")
-        "board": env.get("PIOENV"),
+        cmd += [sect_adr, sect_file]
-        "mcu": env.get("BOARD_MCU"),
-        "repo": repo_owner,
-        "files": files,
-        "part": None,
-        "has_mui": False,
-        "has_inkhud": False,
-    }
-    # Get partition table (generated in esp32_pre.py) if it exists
-    if env.get("custom_mtjson_part"):
-        # custom_mtjson_part is a JSON string, convert it back to a dict
-        pj = json.loads(env.get("custom_mtjson_part"))
-        manifest["part"] = pj
-    # Enable has_mui for TFT builds
-    if ("HAS_TFT", 1) in env.get("CPPDEFINES", []):
-        manifest["has_mui"] = True
-    if "MESHTASTIC_INCLUDE_INKHUD" in env.get("CPPDEFINES", []):
-        manifest["has_inkhud"] = True
 
-    # Write the manifest to the build directory
+    print(f" - {hex(app_offset)} | {firmware_name}")
-    with open(env.subst("$BUILD_DIR/${PROGNAME}.mt.json"), "w") as f:
+    cmd += [hex(app_offset), firmware_name]
-        json.dump(manifest, f, indent=2)
+
+    print("Using esptool.py arguments: %s" % " ".join(cmd))
+
+    esptool.main(cmd)
+
+
+if platform.name == "espressif32":
+    sys.path.append(join(platform.get_package_dir("tool-esptoolpy")))
+    import esptool
+
+    env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", esp32_create_combined_bin)
+
+    esp32_kind = env.GetProjectOption("custom_esp32_kind")
+    if esp32_kind == "esp32":
+        # Free up some IRAM by removing auxiliary SPI flash chip drivers.
+        # Wrapped stub symbols are defined in src/platform/esp32/iram-quirk.c.
+        env.Append(
+            LINKFLAGS=[
+                "-Wl,--wrap=esp_flash_chip_gd",
+                "-Wl,--wrap=esp_flash_chip_issi",
+                "-Wl,--wrap=esp_flash_chip_winbond",
+            ]
+        )
+    else:
+        # For newer ESP32 targets, using newlib nano works better.
+        env.Append(LINKFLAGS=["--specs=nano.specs", "-u", "_printf_float"])
+
+if platform.name == "nordicnrf52":
+    env.AddPostAction("$BUILD_DIR/${PROGNAME}.hex",
+                      env.VerboseAction(f"\"{sys.executable}\" ./bin/uf2conv.py \"$BUILD_DIR/firmware.hex\" -c -f 0xADA52840 -o \"$BUILD_DIR/firmware.uf2\"",
+                                        "Generating UF2 file"))
 
 Import("projenv")
 
 prefsLoc = projenv["PROJECT_DIR"] + "/version.properties"
 verObj = readProps(prefsLoc)
-print(f"Using meshtastic platformio-custom.py, firmware version {verObj['long']} on {env.get('PIOENV')}")
+print("Using meshtastic platformio-custom.py, firmware version " + verObj["long"] + " on " + env.get("PIOENV"))
 
 # get repository owner if git is installed
 try:
@@ -123,10 +139,10 @@ flags = [
         "-DBUILD_EPOCH=" + str(build_epoch),
     ] + pref_flags
 
-print("Using flags:")
+print ("Using flags:")
 for flag in flags:
     print(flag)
-
+    
 projenv.Append(
     CCFLAGS=flags,
 )
@@ -164,23 +180,4 @@ def load_boot_logo(source, target, env):
 
 # Load the boot logo on TFT builds
 if ("HAS_TFT", 1) in env.get("CPPDEFINES", []):
-    env.AddPreAction(f"$BUILD_DIR/{lfsbin}", load_boot_logo)
+    env.AddPreAction('$BUILD_DIR/littlefs.bin', load_boot_logo)
-
-mtjson_deps = ["buildprog"]
-if platform.name == "espressif32":
-    # Build littlefs image as part of mtjson target
-    # Equivalent to `pio run -t buildfs`
-    target_lfs = env.DataToBin(
-        join("$BUILD_DIR", "${ESP32_FS_IMAGE_NAME}"), "$PROJECT_DATA_DIR"
-    )
-    # prepend the littlefs target to the mtjson dependencies
-    # mtjson_deps.insert(0, target_lfs)
-
-env.AddCustomTarget(
-    name="mtjson",
-    dependencies=mtjson_deps,
-    actions=[manifest_gather],
-    title="Meshtastic Manifest",
-    description="Generating Meshtastic manifest JSON + Checksums",
-    always_build=False,
-)

bin/platformio-pre.py

@@ -1,19 +0,0 @@
-#!/usr/bin/env python3
-# trunk-ignore-all(ruff/F821)
-# trunk-ignore-all(flake8/F821): For SConstruct imports
-Import("env")
-platform = env.PioPlatform()
-
-if platform.name == "native":
-    env.Replace(PROGNAME="meshtasticd")
-else:
-    from readprops import readProps
-    prefsLoc = env["PROJECT_DIR"] + "/version.properties"
-    verObj = readProps(prefsLoc)
-    env.Replace(PROGNAME=f"firmware-{env.get('PIOENV')}-{verObj['long']}")
-    env.Replace(ESP32_FS_IMAGE_NAME=f"littlefs-{env.get('PIOENV')}-{verObj['long']}")
-
-# Print the new program name for verification
-print(f"PROGNAME: {env.get('PROGNAME')}")
-if platform.name == "espressif32":
-    print(f"ESP32_FS_IMAGE_NAME: {env.get('ESP32_FS_IMAGE_NAME')}")

bin/shame.py

@@ -1,95 +0,0 @@
-import sys
-import os
-import json
-from github import Github
-
-def parseFile(path):
-    with open(path, "r") as f:
-        data = json.loads(f)
-    for file in data["files"]:
-        if file["name"].endswith(".bin"):
-            return file["name"], file["bytes"]
-
-if len(sys.argv) != 4:
-    print(f"expected usage: {sys.argv[0]} <PR number> <path to old-manifests> <path to new-manifests>")
-    sys.exit(1)
-
-pr_number = int(sys.argv[1])
-
-token = os.getenv("GITHUB_TOKEN")
-if not token:
-    raise EnvironmentError("GITHUB_TOKEN not found in environment.")
-
-repo_name = os.getenv("GITHUB_REPOSITORY")  # "owner/repo"
-if not repo_name:
-    raise EnvironmentError("GITHUB_REPOSITORY not found in environment.")
-
-oldFiles = sys.argv[2]
-old = set(os.path.join(oldFiles, f) for f in os.listdir(oldFiles) if os.path.isfile(f))
-newFiles = sys.argv[3]
-new = set(os.path.join(newFiles, f) for f in os.listdir(newFiles) if os.path.isfile(f))
-
-startMarkdown = "# Target Size Changes\n\n"
-markdown = ""
-
-newlyIntroduced = new - old
-if len(newlyIntroduced) > 0:
-    markdown += "## Newly Introduced Targets\n\n"
-    # create a table
-    markdown += "| File | Size |\n"
-    markdown += "| ---- | ---- |\n"
-    for f in newlyIntroduced:
-        name, size = parseFile(f)
-        markdown += f"| `{name}` | {size}b |\n"
-
-# do not log removed targets
-# PRs only run a small subset of builds, so removed targets are not meaningful
-# since they are very likely to just be not ran in PR CI
-
-both = old & new
-degradations = []
-improvements = []
-for f in both:
-    oldName, oldSize = parseFile(f)
-    _, newSize = parseFile(f)
-    if oldSize != newSize:
-        if newSize < oldSize:
-            improvements.append((oldName, oldSize, newSize))
-        else:
-            degradations.append((oldName, oldSize, newSize))
-
-if len(degradations) > 0:
-    markdown += "\n## Degradation\n\n"
-    # create a table
-    markdown += "| File | Difference | Old Size | New Size |\n"
-    markdown += "| ---- | ---------- | -------- | -------- |\n"
-    for oldName, oldSize, newSize in degradations:
-        markdown += f"| `{oldName}` | **{oldSize - newSize}b** | {oldSize}b | {newSize}b |\n"
-
-if len(improvements) > 0:
-    markdown += "\n## Improvement\n\n"
-    # create a table
-    markdown += "| File | Difference | Old Size | New Size |\n"
-    markdown += "| ---- | ---------- | -------- | -------- |\n"
-    for oldName, oldSize, newSize in improvements:
-        markdown += f"| `{oldName}` | **{oldSize - newSize}b** | {oldSize}b | {newSize}b |\n"
-
-if len(markdown) == 0:
-    markdown = "No changes in target sizes detected."
-
-g = Github(token)
-repo = g.get_repo(repo_name)
-pr = repo.get_pull(pr_number)
-
-existing_comment = None
-for comment in pr.get_issue_comments():
-    if comment.body.startswith(startMarkdown):
-        existing_comment = comment
-        break
-
-final_markdown = startMarkdown + markdown
-
-if existing_comment:
-    existing_comment.edit(body=final_markdown)
-else:
-    pr.create_issue_comment(body=final_markdown)

bin/test-simulator.sh

@@ -3,7 +3,7 @@
 set -e
 
 echo "Starting simulator"
-.pio/build/native/meshtasticd -s &
+.pio/build/native/program &
 sleep 20 # 5 seconds was not enough
 
 echo "Simulator started, launching python test..."

boards/CDEBYTE_EoRa-S3.json

@@ -7,7 +7,7 @@
     "extra_flags": [
       "-D CDEBYTE_EORA_S3",
       "-D ARDUINO_USB_CDC_ON_BOOT=1",
-      "-D ARDUINO_USB_MODE=1",
+      "-D ARDUINO_USB_MODE=0",
       "-D ARDUINO_RUNNING_CORE=1",
       "-D ARDUINO_EVENT_RUNNING_CORE=1",
       "-D BOARD_HAS_PSRAM"

boards/bpi_picow_esp32_s3.json

@@ -6,7 +6,7 @@
     "core": "esp32",
     "extra_flags": [
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_USB_MODE=0",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1",
       "-DBOARD_HAS_PSRAM"

boards/hackaday-communicator.json

@@ -1,41 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "memory_type": "qio_opi"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=1",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [["0x303A", "0x1001"]],
-    "mcu": "esp32s3",
-    "variant": "hackaday-communicator"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "hackaday-communicator (16 MB FLASH, 8 MB PSRAM)",
-  "upload": {
-    "flash_size": "16MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 16777216,
-    "use_1200bps_touch": true,
-    "wait_for_upload_port": true,
-    "require_upload_port": true,
-    "speed": 1500000
-  },
-  "url": "hackaday.com",
-  "vendor": "hackaday"
-}

boards/heltec_v4.json

@@ -9,7 +9,7 @@
     "extra_flags": [
       "-DBOARD_HAS_PSRAM",
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_USB_MODE=0",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],

boards/heltec_vision_master_e213.json

@@ -9,7 +9,7 @@
     "extra_flags": [
       "-DBOARD_HAS_PSRAM",
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_USB_MODE=0",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],

boards/heltec_vision_master_e290.json

@@ -9,7 +9,7 @@
     "extra_flags": [
       "-DBOARD_HAS_PSRAM",
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_USB_MODE=0",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],

boards/heltec_vision_master_t190.json

@@ -9,7 +9,7 @@
     "extra_flags": [
       "-DBOARD_HAS_PSRAM",
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_USB_MODE=0",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],

boards/heltec_wireless_tracker.json

@@ -8,7 +8,7 @@
     "extra_flags": [
       "-DHELTEC_WIRELESS_TRACKER",
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_USB_MODE=0",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],

boards/heltec_wireless_tracker_v2.json

@@ -7,7 +7,7 @@
     "core": "esp32",
     "extra_flags": [
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_USB_MODE=0",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],

boards/seeed-xiao-s3.json

@@ -8,7 +8,7 @@
     "extra_flags": [
       "-DBOARD_HAS_PSRAM",
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_USB_MODE=0",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=0"
     ],

boards/station-g2.json

@@ -8,7 +8,7 @@
     "extra_flags": [
       "-DBOARD_HAS_PSRAM",
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_USB_MODE=0",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=0"
     ],

boards/t-deck.json

@@ -8,7 +8,7 @@
     "extra_flags": [
       "-DBOARD_HAS_PSRAM",
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_USB_MODE=0",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],

boards/t-watch-s3.json

@@ -9,7 +9,7 @@
       "-DBOARD_HAS_PSRAM",
       "-DT_WATCH_S3",
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_USB_MODE=0",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],

boards/tbeam-s3-core.json

@@ -8,7 +8,7 @@
       "-DBOARD_HAS_PSRAM",
       "-DLILYGO_TBEAM_S3_CORE",
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_USB_MODE=0",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],

boards/tlora-t3s3-v1.json

@@ -7,7 +7,7 @@
     "extra_flags": [
       "-DLILYGO_T3S3_V1",
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_USB_MODE=0",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1",
       "-DBOARD_HAS_PSRAM"

boards/unphone.json

@@ -10,7 +10,7 @@
       "-DBOARD_HAS_PSRAM",
       "-DUNPHONE_SPIN=9",
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_USB_MODE=0",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],

debian/changelog

@@ -1,22 +1,3 @@
-meshtasticd (2.7.18.0) unstable; urgency=medium
-
-  * Version 2.7.18
-
- -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Fri, 02 Jan 2026 12:45:36 +0000
-
-meshtasticd (2.7.17.0) unstable; urgency=medium
-
-  * Version 2.7.17
-
- -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Fri, 28 Nov 2025 15:11:34 +0000
-
-meshtasticd (2.7.16.0) unstable; urgency=medium
-
-  * Version 2.7.16
-
- -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Wed, 19 Nov 2025 16:12:32 +0000
-
-
 meshtasticd (2.7.15.0) unstable; urgency=medium
 
   * Version 2.7.15

debian/rules

@@ -28,4 +28,5 @@ override_dh_auto_build:
 	# Build with platformio
 	$(PIO_ENV) platformio run -e native-tft
 	# Move the binary and default config to the correct name
+	mv .pio/build/native-tft/program .pio/build/native-tft/meshtasticd
 	cp bin/config-dist.yaml bin/config.yaml

default_16MB.csv

@@ -1,7 +0,0 @@
-# Name,   Type, SubType, Offset,  Size, Flags
-nvs,      data, nvs,     0x9000,  0x5000,
-otadata,  data, ota,     0xe000,  0x2000,
-app0,     app,  ota_0,   0x10000, 0x640000,
-app1,     app,  ota_1,   0x650000,0x640000,
-spiffs,   data, spiffs,  0xc90000,0x360000,
-coredump, data, coredump,0xFF0000,0x10000,

default_8MB.csv

@@ -1,7 +0,0 @@
-# Name,   Type, SubType, Offset,  Size, Flags
-nvs,      data, nvs,     0x9000,  0x5000,
-otadata,  data, ota,     0xe000,  0x2000,
-app0,     app,  ota_0,   0x10000, 0x330000,
-app1,     app,  ota_1,   0x340000,0x330000,
-spiffs,   data, spiffs,  0x670000,0x180000,
-coredump, data, coredump,0x7F0000,0x10000,

extra_scripts/disable_adafruit_usb.py

@@ -1,9 +1,10 @@
-#!/usr/bin/env python3
 # trunk-ignore-all(flake8/F821)
 # trunk-ignore-all(ruff/F821)
 
 Import("env")
 
+# NOTE: This is not currently used, but can serve as an example on how to write extra_scripts
+
 # print("Current CLI targets", COMMAND_LINE_TARGETS)
 # print("Current Build targets", BUILD_TARGETS)
 # print("CPP defs", env.get("CPPDEFINES"))

extra_scripts/esp32_extra.py

@@ -1,75 +0,0 @@
-#!/usr/bin/env python3
-# trunk-ignore-all(ruff/F821)
-# trunk-ignore-all(flake8/F821): For SConstruct imports
-# trunk-ignore-all(ruff/E402): Hacky esptool import
-# trunk-ignore-all(flake8/E402): Hacky esptool import
-import sys
-from os.path import join
-
-Import("env")
-platform = env.PioPlatform()
-
-sys.path.append(join(platform.get_package_dir("tool-esptoolpy")))
-# IntelHex workaround, remove after fixed upstream
-# https://github.com/platformio/platform-espressif32/issues/1632
-try:
-    import intelhex
-except ImportError:
-    env.Execute("$PYTHONEXE -m pip install intelhex")
-import esptool
-
-
-def esp32_create_combined_bin(source, target, env):
-    # this sub is borrowed from ESPEasy build toolchain. It's licensed under GPL V3
-    # https://github.com/letscontrolit/ESPEasy/blob/mega/tools/pio/post_esp32.py
-    print("Generating combined binary for serial flashing")
-
-    app_offset = 0x10000
-
-    new_file_name = env.subst("$BUILD_DIR/${PROGNAME}.factory.bin")
-    sections = env.subst(env.get("FLASH_EXTRA_IMAGES"))
-    firmware_name = env.subst("$BUILD_DIR/${PROGNAME}.bin")
-    chip = env.get("BOARD_MCU")
-    board = env.BoardConfig()
-    flash_size = board.get("upload.flash_size")
-    flash_freq = board.get("build.f_flash", "40m")
-    flash_freq = flash_freq.replace("000000L", "m")
-    flash_mode = board.get("build.flash_mode", "dio")
-    memory_type = board.get("build.arduino.memory_type", "qio_qspi")
-    if flash_mode == "qio" or flash_mode == "qout":
-        flash_mode = "dio"
-    if memory_type == "opi_opi" or memory_type == "opi_qspi":
-        flash_mode = "dout"
-    cmd = [
-        "--chip",
-        chip,
-        "merge-bin",
-        "-o",
-        new_file_name,
-        "--flash-mode",
-        flash_mode,
-        "--flash-freq",
-        flash_freq,
-        "--flash-size",
-        flash_size,
-    ]
-
-    print("    Offset | File")
-    for section in sections:
-        sect_adr, sect_file = section.split(" ", 1)
-        print(f" -  {sect_adr} | {sect_file}")
-        cmd += [sect_adr, sect_file]
-
-    print(f" - {hex(app_offset)} | {firmware_name}")
-    cmd += [hex(app_offset), firmware_name]
-
-    print("Using esptool.py arguments: %s" % " ".join(cmd))
-
-    esptool.main(cmd)
-
-
-env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", esp32_create_combined_bin)
-
-# Enable Newlib Nano formatting to save space
-# ...but allow printf float support (compromise)
-env.Append(LINKFLAGS=["--specs=nano.specs", "-u", "_printf_float"])

extra_scripts/esp32_pre.py

@@ -1,73 +0,0 @@
-#!/usr/bin/env python3
-# trunk-ignore-all(ruff/F821)
-# trunk-ignore-all(flake8/F821): For SConstruct imports
-import json
-import sys
-from os.path import isfile
-
-Import("env")
-
-
-# From https://github.com/platformio/platform-espressif32/blob/develop/builder/main.py
-def _parse_size(value):
-    if isinstance(value, int):
-        return value
-    elif value.isdigit():
-        return int(value)
-    elif value.startswith("0x"):
-        return int(value, 16)
-    elif value[-1].upper() in ("K", "M"):
-        base = 1024 if value[-1].upper() == "K" else 1024 * 1024
-        return int(value[:-1]) * base
-    return value
-
-
-def _parse_partitions(env):
-    partitions_csv = env.subst("$PARTITIONS_TABLE_CSV")
-    if not isfile(partitions_csv):
-        sys.stderr.write(
-            "Could not find the file %s with partitions " "table.\n" % partitions_csv
-        )
-        env.Exit(1)
-        return
-
-    result = []
-    # The first offset is 0x9000 because partition table is flashed to 0x8000 and
-    # occupies an entire flash sector, which size is 0x1000
-    next_offset = 0x9000
-    with open(partitions_csv) as fp:
-        for line in fp.readlines():
-            line = line.strip()
-            if not line or line.startswith("#"):
-                continue
-            tokens = [t.strip() for t in line.split(",")]
-            if len(tokens) < 5:
-                continue
-
-            bound = 0x10000 if tokens[1] in ("0", "app") else 4
-            calculated_offset = (next_offset + bound - 1) & ~(bound - 1)
-            partition = {
-                "name": tokens[0],
-                "type": tokens[1],
-                "subtype": tokens[2],
-                "offset": tokens[3] or calculated_offset,
-                "size": tokens[4],
-                "flags": tokens[5] if len(tokens) > 5 else None,
-            }
-            result.append(partition)
-            next_offset = _parse_size(partition["offset"]) + _parse_size(
-                partition["size"]
-            )
-
-    return result
-
-
-def mtjson_esp32_part(target, source, env):
-    part = _parse_partitions(env)
-    pj = json.dumps(part)
-    # print(f"JSON_PARTITIONS: {pj}")
-    # Dump json string to 'custom_mtjson_part' variable to use later when writing the manifest
-    env.Replace(custom_mtjson_part=pj)
-
-
-env.AddPreAction("mtjson", mtjson_esp32_part)

extra_scripts/extra_stm32.py

@@ -1,9 +1,7 @@
-#!/usr/bin/env python3
 # trunk-ignore-all(ruff/F821)
 # trunk-ignore-all(flake8/F821): For SConstruct imports
 
 Import("env")
-
 # Custom HEX from ELF
 env.AddPostAction(
     "$BUILD_DIR/${PROGNAME}.elf",

extra_scripts/nrf52_extra.py

@@ -1,50 +0,0 @@
-#!/usr/bin/env python3
-# trunk-ignore-all(ruff/F821)
-# trunk-ignore-all(flake8/F821): For SConstruct imports
-
-import sys
-from os.path import basename
-
-Import("env")
-
-
-# Custom HEX from ELF
-# Convert hex to uf2 for nrf52
-def nrf52_hex_to_uf2(source, target, env):
-    hex_path = target[0].get_abspath()
-    # When using merged hex, drop 'merged' from uf2 filename
-    uf2_path = hex_path.replace(".merged.", ".")
-    uf2_path = uf2_path.replace(".hex", ".uf2")
-    env.Execute(
-        env.VerboseAction(
-            f'"{sys.executable}" ./bin/uf2conv.py "{hex_path}" -c -f 0xADA52840 -o "{uf2_path}"',
-            f"Generating UF2 file from {basename(hex_path)}",
-        )
-    )
-
-
-def nrf52_mergehex(source, target, env):
-    hex_path = target[0].get_abspath()
-    merged_hex_path = hex_path.replace(".hex", ".merged.hex")
-    merge_with = None
-    if "wio-sdk-wm1110" == str(env.get("PIOENV")):
-        merge_with = env.subst("$PROJECT_DIR/bin/s140_nrf52_7.3.0_softdevice.hex")
-    else:
-        print("merge_with not defined for this target")
-
-    if merge_with is not None:
-        env.Execute(
-            env.VerboseAction(
-                f'"$PROJECT_DIR/bin/mergehex" -m "{hex_path}" "{merge_with}" -o "{merged_hex_path}"',
-                "Merging HEX with SoftDevice",
-            )
-        )
-        print(f'Merged file saved at "{basename(merged_hex_path)}"')
-        nrf52_hex_to_uf2([hex_path, merge_with], [env.File(merged_hex_path)], env)
-
-
-# if WM1110 target, merge hex with softdevice 7.3.0
-if "wio-sdk-wm1110" == env.get("PIOENV"):
-    env.AddPostAction("$BUILD_DIR/${PROGNAME}.hex", nrf52_mergehex)
-else:
-    env.AddPostAction("$BUILD_DIR/${PROGNAME}.hex", nrf52_hex_to_uf2)

meshtasticd.spec.rpkg

@@ -76,7 +76,7 @@ platformio run -e native-tft
 %install
 # Install meshtasticd binary
 mkdir -p %{buildroot}%{_bindir}
-install -m 0755 .pio/build/native-tft/meshtasticd %{buildroot}%{_bindir}/meshtasticd
+install -m 0755 .pio/build/native-tft/program %{buildroot}%{_bindir}/meshtasticd
 
 # Install portduino VFS dir
 install -p -d -m 0770 %{buildroot}%{_localstatedir}/lib/meshtasticd

platformio.ini

@@ -2,10 +2,10 @@
 ; https://docs.platformio.org/page/projectconf.html
 
 [platformio]
-default_envs = heltec-v3
+default_envs = tbeam
 
 extra_configs =
-	variants/*/*.ini
+	arch/*/*.ini
 	variants/*/*/platformio.ini
 	variants/*/diy/*/platformio.ini
 	src/graphics/niche/InkHUD/PlatformioConfig.ini
@@ -14,9 +14,7 @@ description = Meshtastic
 
 [env]
 test_build_src = true
-extra_scripts =
+extra_scripts = bin/platformio-custom.py
-	pre:bin/platformio-pre.py
-	bin/platformio-custom.py
 ; note: we add src to our include search path so that lmic_project_config can override
 ; note: TINYGPS_OPTION_NO_CUSTOM_FIELDS is VERY important.  We don't use custom fields and somewhere in that pile
 ; of code is a heap corruption bug!
@@ -64,7 +62,7 @@ monitor_speed = 115200
 monitor_filters = direct
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-esp8266-oled-ssd1306 packageName=https://github.com/meshtastic/esp8266-oled-ssd1306 gitBranch=master
-	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/b34c6817c25d6faabb3a8a162b5d14fb75395433.zip
+	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/2887bf4a19f64d92c984dcc8fd5ca7429e425e4a.zip
 	# renovate: datasource=git-refs depName=meshtastic-OneButton packageName=https://github.com/meshtastic/OneButton gitBranch=master
 	https://github.com/meshtastic/OneButton/archive/fa352d668c53f290cfa480a5f79ad422cd828c70.zip
 	# renovate: datasource=git-refs depName=meshtastic-arduino-fsm packageName=https://github.com/meshtastic/arduino-fsm gitBranch=master
@@ -92,7 +90,7 @@ framework = arduino
 lib_deps =
 	${env.lib_deps}
 	# renovate: datasource=custom.pio depName=NonBlockingRTTTL packageName=end2endzone/library/NonBlockingRTTTL
-	end2endzone/NonBlockingRTTTL@1.4.0
+	end2endzone/NonBlockingRTTTL@1.3.0
 build_flags = ${env.build_flags} -Os
 build_src_filter = ${env.build_src_filter} -<platform/portduino/> -<graphics/niche/>
 
@@ -103,23 +101,26 @@ lib_deps =
 	thingsboard/TBPubSubClient@2.12.1
 	# renovate: datasource=custom.pio depName=NTPClient packageName=arduino-libraries/library/NTPClient
 	arduino-libraries/NTPClient@3.2.1
-
-; Extra TCP/IP networking libs for supported devices
-[networking_extra]
-lib_deps =
 	# renovate: datasource=custom.pio depName=Syslog packageName=arcao/library/Syslog
 	arcao/Syslog@2.0.0
 
+; Minimal networking libs for nrf52 (excludes Syslog to save flash)
+[nrf52_networking_base]
+lib_deps =
+	# renovate: datasource=custom.pio depName=TBPubSubClient packageName=thingsboard/library/TBPubSubClient
+	thingsboard/TBPubSubClient@2.12.1
+	# renovate: datasource=custom.pio depName=NTPClient packageName=arduino-libraries/library/NTPClient
+	arduino-libraries/NTPClient@3.2.1
+
 [radiolib_base]
 lib_deps =
 	# renovate: datasource=custom.pio depName=RadioLib packageName=jgromes/library/RadioLib
-	# jgromes/RadioLib@7.4.0
+	jgromes/RadioLib@7.3.0
-	https://github.com/jgromes/RadioLib/archive/536c7267362e2c1345be7054ba45e503252975ff.zip
 
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/a8e2f947f7abaf0c5ac8e6dd189a22156335beaa.zip
+	https://github.com/meshtastic/device-ui/archive/28167c67dfd13015a0b5eef1828f95fe8e3ab7c3.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
@@ -158,8 +159,8 @@ lib_deps =
 	emotibit/EmotiBit MLX90632@1.0.8
 	# renovate: datasource=custom.pio depName=Adafruit MLX90614 packageName=adafruit/library/Adafruit MLX90614 Library
 	adafruit/Adafruit MLX90614 Library@2.1.5
-	# renovate: datasource=git-refs depName=INA3221 packageName=https://github.com/sgtwilko/INA3221 gitBranch=FixOverflow
+	# renovate: datasource=github-tags depName=INA3221 packageName=sgtwilko/INA3221
-	https://github.com/sgtwilko/INA3221/archive/bb03d7e9bfcc74fc798838a54f4f99738f29fc6a.zip
+	https://github.com/sgtwilko/INA3221#bb03d7e9bfcc74fc798838a54f4f99738f29fc6a
 	# renovate: datasource=custom.pio depName=QMC5883L Compass packageName=mprograms/library/QMC5883LCompass
 	mprograms/QMC5883LCompass@1.2.3
 	# renovate: datasource=custom.pio depName=DFRobot_RTU packageName=dfrobot/library/DFRobot_RTU
@@ -167,7 +168,7 @@ lib_deps =
 	# renovate: datasource=git-refs depName=DFRobot_RainfallSensor packageName=https://github.com/DFRobot/DFRobot_RainfallSensor gitBranch=master
 	https://github.com/DFRobot/DFRobot_RainfallSensor/archive/38fea5e02b40a5430be6dab39a99a6f6347d667e.zip
 	# renovate: datasource=custom.pio depName=INA226 packageName=robtillaart/library/INA226
-	robtillaart/INA226@0.6.5
+	robtillaart/INA226@0.6.4
 	# renovate: datasource=custom.pio depName=SparkFun MAX3010x packageName=sparkfun/library/SparkFun MAX3010x Pulse and Proximity Sensor Library
 	sparkfun/SparkFun MAX3010x Pulse and Proximity Sensor Library@1.1.2
 	# renovate: datasource=custom.pio depName=SparkFun 9DoF IMU Breakout ICM 20948 packageName=sparkfun/library/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library
@@ -180,8 +181,6 @@ lib_deps =
 	dfrobot/DFRobot_BMM150@1.0.0
 	# renovate: datasource=custom.pio depName=Adafruit_TSL2561 packageName=adafruit/library/Adafruit TSL2561
 	adafruit/Adafruit TSL2561@1.1.2
-	# renovate: datasource=custom.pio depName=BH1750_WE packageName=wollewald/library/BH1750_WE
-	wollewald/BH1750_WE@1.1.10
 
 ; (not included in native / portduino)
 [environmental_extra]
@@ -203,7 +202,7 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=SparkFun Qwiic Scale NAU7802 packageName=sparkfun/library/SparkFun Qwiic Scale NAU7802 Arduino Library
 	sparkfun/SparkFun Qwiic Scale NAU7802 Arduino Library@1.0.6
 	# renovate: datasource=custom.pio depName=ClosedCube OPT3001 packageName=closedcube/library/ClosedCube OPT3001
-	closedcube/ClosedCube OPT3001@1.1.2
+	ClosedCube OPT3001@1.1.2
 	# renovate: datasource=custom.pio depName=Bosch BSEC2 packageName=boschsensortec/library/bsec2
 	boschsensortec/bsec2@1.10.2610
 	# renovate: datasource=custom.pio depName=Bosch BME68x packageName=boschsensortec/library/BME68x Sensor Library
@@ -211,6 +210,6 @@ lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-DFRobot_LarkWeatherStation packageName=https://github.com/meshtastic/DFRobot_LarkWeatherStation gitBranch=master
 	https://github.com/meshtastic/DFRobot_LarkWeatherStation/archive/4de3a9cadef0f6a5220a8a906cf9775b02b0040d.zip
 	# renovate: datasource=custom.pio depName=Sensirion Core packageName=sensirion/library/Sensirion Core
-	sensirion/Sensirion Core@0.7.2
+	sensirion/Sensirion Core@0.7.1
 	# renovate: datasource=custom.pio depName=Sensirion I2C SCD4x packageName=sensirion/library/Sensirion I2C SCD4x
 	sensirion/Sensirion I2C SCD4x@1.1.0

src/AudioThread.h

@@ -50,11 +50,8 @@ class AudioThread : public concurrency::OSThread
             delete i2sRtttl;
             i2sRtttl = nullptr;
         }
-
+        delete rtttlFile;
-        if (rtttlFile != nullptr) {
+        rtttlFile = nullptr;
-            delete rtttlFile;
-            rtttlFile = nullptr;
-        }
 
         setCPUFast(false);
 #ifdef T_LORA_PAGER
@@ -102,9 +99,9 @@ class AudioThread : public concurrency::OSThread
     };
 
     AudioGeneratorRTTTL *i2sRtttl = nullptr;
-    AudioOutputI2S *audioOut = nullptr;
+    AudioOutputI2S *audioOut;
 
-    AudioFileSourcePROGMEM *rtttlFile = nullptr;
+    AudioFileSourcePROGMEM *rtttlFile;
 };
 
 #endif

src/DebugConfiguration.h

@@ -151,8 +151,9 @@ extern "C" void logLegacy(const char *level, const char *fmt, ...);
 #include <RAK13800_W5100S.h>
 #endif // HAS_ETHERNET
 
-#if HAS_ETHERNET && defined(ARCH_ESP32)
+#if HAS_ETHERNET && defined(USE_WS5500)
-#include <ETH.h>
+#include <ETHClass2.h>
+#define ETH ETH2
 #endif // HAS_ETHERNET
 
 #if HAS_WIFI

src/DisplayFormatters.cpp

@@ -31,9 +31,6 @@ const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaC
     case meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST:
         return useShortName ? "LongF" : "LongFast";
         break;
-    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO:
-        return useShortName ? "LongT" : "LongTurbo";
-        break;
     case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
         return useShortName ? "LongM" : "LongMod";
         break;