Merge branch 'master' into apollo

* update libpax
* fix interval init

.devcontainer/devcontainer.json

@@ -13,16 +13,13 @@
   },
   "customizations": {
     "vscode": {
-      "extensions": [
+      "extensions": ["ms-vscode.cpptools", "platformio.platformio-ide"]
-        "ms-vscode.cpptools",
-        "platformio.platformio-ide",
-      ]
     }
   },
 
   // Use 'forwardPorts' to make a list of ports inside the container available locally.
-  "forwardPorts": [ 4403 ],
+  "forwardPorts": [4403],
 
   // Run commands to prepare the container for use
-  "postCreateCommand": ".devcontainer/setup.sh",
+  "postCreateCommand": ".devcontainer/setup.sh"
 }

.devcontainer/setup.sh

@@ -1,3 +1,3 @@
 #!/usr/bin/env sh
 
-git submodule update --init
+git submodule update --init

.github/ISSUE_TEMPLATE/Bug Report.yml

@@ -49,10 +49,24 @@ body:
         - Heltec V3
         - Heltec Wireless Paper
         - Heltec Wireless Tracker
+        - Heltec Mesh Node T114
+        - Heltec Vision Master E213
+        - Heltec Vision Master E290
+        - Heltec Vision Master T190
+        - Nano G1
+        - Nano G1 Explorer
+        - Nano G2 Ultra
         - Raspberry Pi Pico (W)
         - Relay v1
         - Relay v2
         - Seeed Wio Tracker 1110
+        - Seeed Card Tracker T1000-E
+        - Station G1
+        - Station G2
+        - unPhone
+        - CanaryOne
+        - Chatter
+        - Linux Native
         - DIY
         - Other
     validations:

.github/ISSUE_TEMPLATE/feature.yml

@@ -18,6 +18,7 @@ body:
         - ESP32
         - RP2040
         - Linux Native
+        - Cross-Platform
         - other
     validations:
       required: true

.github/actions/build-variant/action.yml

@@ -0,0 +1,95 @@
+name: Setup Build Variant Composite Action
+description: Variant build actions for Meshtastic Platform IO steps
+
+inputs:
+  board:
+    description: The board to build for
+    required: true
+  github_token:
+    description: GitHub token
+    required: true
+  build-script-path:
+    description: Path to the build script
+    required: true
+  remove-debug-flags:
+    description: A space separated list of files to remove debug flags from
+    required: false
+    default: ""
+  ota-firmware-source:
+    description: The OTA firmware file to pull
+    required: false
+    default: ""
+  ota-firmware-target:
+    description: The target path to store the OTA firmware file
+    required: false
+    default: ""
+  artifact-paths:
+    description: A newline separated list of paths to store as artifacts
+    required: false
+    default: ""
+  include-web-ui:
+    description: Include the web UI in the build
+    required: false
+    default: "false"
+  arch:
+    description: Processor arch name
+    required: true
+    default: "esp32"
+
+runs:
+  using: composite
+  steps:
+    - name: Build base
+      id: base
+      uses: ./.github/actions/setup-base
+
+    - name: Pull web ui
+      if: inputs.include-web-ui == 'true'
+      uses: dsaltares/fetch-gh-release-asset@master
+      with:
+        repo: meshtastic/web
+        file: build.tar
+        target: build.tar
+        token: ${{ inputs.github_token }}
+        version: tags/v2.5.3
+
+    - name: Unpack web ui
+      if: inputs.include-web-ui == 'true'
+      shell: bash
+      run: |
+        tar -xf build.tar -C data/static
+        rm build.tar
+
+    - name: Remove debug flags for release
+      shell: bash
+      if: inputs.remove-debug-flags != ''
+      run: |
+        for INI_FILE in ${{ inputs.remove-debug-flags }}; do
+          sed -i '/DDEBUG_HEAP/d' ${INI_FILE}
+        done
+
+    - name: Build ${{ inputs.board }}
+      shell: bash
+      run: ${{ inputs.build-script-path }} ${{ inputs.board }}
+
+    - name: Pull OTA Firmware
+      if: inputs.ota-firmware-source != '' &&  inputs.ota-firmware-target != ''
+      uses: dsaltares/fetch-gh-release-asset@master
+      with:
+        repo: meshtastic/firmware-ota
+        file: ${{ inputs.ota-firmware-source }}
+        target: ${{ inputs.ota-firmware-target }}
+        token: ${{ inputs.github_token }}
+
+    - name: Get release version string
+      shell: bash
+      run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+      id: version
+
+    - name: Store binaries as an artifact
+      uses: actions/upload-artifact@v4
+      with:
+        name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+        overwrite: true
+        path: |
+          ${{ inputs.artifact-paths }}

.github/actions/setup-base/action.yml

@@ -11,6 +11,11 @@ runs:
         ref: ${{github.event.pull_request.head.ref}}
         repository: ${{github.event.pull_request.head.repo.full_name}}
 
+    - name: Uncomment build epoch
+      shell: bash
+      run: |
+        sed -i 's/#-DBUILD_EPOCH=$UNIX_TIME/-DBUILD_EPOCH=$UNIX_TIME/' platformio.ini
+
     - name: Install dependencies
       shell: bash
       run: |

.github/dependabot.yml

@@ -0,0 +1,26 @@
+version: 2
+updates:
+  - package-ecosystem: docker
+    directory: devcontainer
+    schedule:
+      interval: daily
+      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
+      timezone: US/Pacific
+  - package-ecosystem: docker
+    directory: /
+    schedule:
+      interval: daily
+      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
+      timezone: US/Pacific
+  - package-ecosystem: gitsubmodule
+    directory: /
+    schedule:
+      interval: daily
+      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
+      timezone: US/Pacific
+  - package-ecosystem: github-actions
+    directory: /.github/workflows
+    schedule:
+      interval: daily
+      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
+      timezone: US/Pacific

.github/workflows/build_esp32.yml

@@ -7,57 +7,31 @@ on:
         required: true
         type: string
 
+permissions: read-all
+
 jobs:
   build-esp32:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
-      - name: Build base
-        id: base
-        uses: ./.github/actions/setup-base
-
-      - name: Pull web ui
-        uses: dsaltares/fetch-gh-release-asset@master
-        with:
-          repo: meshtastic/web
-          file: build.tar
-          target: build.tar
-          token: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Unpack web ui
-        run: |
-          tar -xf build.tar -C data/static
-          rm build.tar
-
-      - name: Remove debug flags for release
-        if: ${{ github.event_name == 'workflow_dispatch' }}
-        run: |
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
 
       - name: Build ESP32
-        run: bin/build-esp32.sh ${{ inputs.board }}
+        id: build
-
+        uses: ./.github/actions/build-variant
-      - name: Pull OTA Firmware
-        uses: dsaltares/fetch-gh-release-asset@master
         with:
-          repo: meshtastic/firmware-ota
+          github_token: ${{ secrets.GITHUB_TOKEN }}
-          file: firmware.bin
+          board: ${{ inputs.board }}
-          target: release/bleota.bin
+          remove-debug-flags: >-
-          token: ${{ secrets.GITHUB_TOKEN }}
+            ./arch/esp32/esp32.ini
-
+            ./arch/esp32/esp32s2.ini
-      - name: Get release version string
+            ./arch/esp32/esp32s3.ini
-        shell: bash
+            ./arch/esp32/esp32c3.ini
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+            ./arch/esp32/esp32c6.ini
-        id: version
+          build-script-path: bin/build-esp32.sh
-
+          ota-firmware-source: firmware.bin
-      - name: Store binaries as an artifact
+          ota-firmware-target: release/bleota.bin
-        uses: actions/upload-artifact@v4
+          artifact-paths: |
-        with:
-          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
-          overwrite: true
-          path: |
             release/*.bin
             release/*.elf
+          include-web-ui: true
+          arch: esp32

.github/workflows/build_esp32_c3.yml

@@ -14,50 +14,24 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
-      - name: Build base
-        id: base
-        uses: ./.github/actions/setup-base
 
-      - name: Pull web ui
+      - name: Build ESP32-C3
-        uses: dsaltares/fetch-gh-release-asset@master
+        id: build
+        uses: ./.github/actions/build-variant
         with:
-          repo: meshtastic/web
+          github_token: ${{ secrets.GITHUB_TOKEN }}
-          file: build.tar
+          board: ${{ inputs.board }}
-          target: build.tar
+          remove-debug-flags: >-
-          token: ${{ secrets.GITHUB_TOKEN }}
+            ./arch/esp32/esp32.ini
-
+            ./arch/esp32/esp32s2.ini
-      - name: Unpack web ui
+            ./arch/esp32/esp32s3.ini
-        run: |
+            ./arch/esp32/esp32c3.ini
-          tar -xf build.tar -C data/static
+            ./arch/esp32/esp32c6.ini
-          rm build.tar
+          build-script-path: bin/build-esp32.sh
-      - name: Remove debug flags for release
+          ota-firmware-source: firmware-c3.bin
-        if: ${{ github.event_name == 'workflow_dispatch' }}
+          ota-firmware-target: release/bleota-c3.bin
-        run: |
+          artifact-paths: |
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
-      - name: Build ESP32
-        run: bin/build-esp32.sh ${{ inputs.board }}
-
-      - name: Pull OTA Firmware
-        uses: dsaltares/fetch-gh-release-asset@master
-        with:
-          repo: meshtastic/firmware-ota
-          file: firmware-c3.bin
-          target: release/bleota-c3.bin
-          token: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Get release version string
-        shell: bash
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
-        with:
-          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
-          overwrite: true
-          path: |
             release/*.bin
             release/*.elf
+          include-web-ui: true
+          arch: esp32c3

.github/workflows/build_esp32_c6.yml

@@ -0,0 +1,37 @@
+name: Build ESP32-C6
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-esp32-c6:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Build ESP32-C6
+        id: build
+        uses: ./.github/actions/build-variant
+        with:
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          board: ${{ inputs.board }}
+          remove-debug-flags: >-
+            ./arch/esp32/esp32.ini
+            ./arch/esp32/esp32s2.ini
+            ./arch/esp32/esp32s3.ini
+            ./arch/esp32/esp32c3.ini
+            ./arch/esp32/esp32c6.ini
+          build-script-path: bin/build-esp32.sh
+          ota-firmware-source: firmware-c3.bin
+          ota-firmware-target: release/bleota-c3.bin
+          artifact-paths: |
+            release/*.bin
+            release/*.elf
+          include-web-ui: true
+          arch: esp32c6

.github/workflows/build_esp32_s3.yml

@@ -7,55 +7,31 @@ on:
         required: true
         type: string
 
+permissions: read-all
+
 jobs:
   build-esp32-s3:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
-      - name: Build base
-        id: base
-        uses: ./.github/actions/setup-base
 
-      - name: Pull web ui
+      - name: Build ESP32-S3
-        uses: dsaltares/fetch-gh-release-asset@master
+        id: build
+        uses: ./.github/actions/build-variant
         with:
-          repo: meshtastic/web
+          github_token: ${{ secrets.GITHUB_TOKEN }}
-          file: build.tar
+          board: ${{ inputs.board }}
-          target: build.tar
+          remove-debug-flags: >-
-          token: ${{ secrets.GITHUB_TOKEN }}
+            ./arch/esp32/esp32.ini
-
+            ./arch/esp32/esp32s2.ini
-      - name: Unpack web ui
+            ./arch/esp32/esp32s3.ini
-        run: |
+            ./arch/esp32/esp32c3.ini
-          tar -xf build.tar -C data/static
+            ./arch/esp32/esp32c6.ini
-          rm build.tar
+          build-script-path: bin/build-esp32.sh
-      - name: Remove debug flags for release
+          ota-firmware-source: firmware-s3.bin
-        if: ${{ github.event_name == 'workflow_dispatch' }}
+          ota-firmware-target: release/bleota-s3.bin
-        run: |
+          artifact-paths: |
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
-      - name: Build ESP32
-        run: bin/build-esp32.sh ${{ inputs.board }}
-
-      - name: Pull OTA Firmware
-        uses: dsaltares/fetch-gh-release-asset@master
-        with:
-          repo: meshtastic/firmware-ota
-          file: firmware-s3.bin
-          target: release/bleota-s3.bin
-          token: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Get release version string
-        shell: bash
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
-        with:
-          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
-          overwrite: true
-          path: |
             release/*.bin
             release/*.elf
+          include-web-ui: true
+          arch: esp32s3

.github/workflows/build_native.yml

@@ -67,7 +67,7 @@ jobs:
       - name: Docker build and push tagged versions
         if: ${{ github.event_name == 'workflow_dispatch' }}
         continue-on-error: true # FIXME: Failing docker login auth
-        uses: docker/build-push-action@v5
+        uses: docker/build-push-action@v6
         with:
           context: .
           file: ./Dockerfile
@@ -77,7 +77,7 @@ jobs:
       - name: Docker build and push
         if: ${{ github.ref == 'refs/heads/master' && github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
         continue-on-error: true # FIXME: Failing docker login auth
-        uses: docker/build-push-action@v5
+        uses: docker/build-push-action@v6
         with:
           context: .
           file: ./Dockerfile

.github/workflows/build_nrf52.yml

@@ -12,24 +12,17 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
-      - name: Build base
-        id: base
-        uses: ./.github/actions/setup-base
 
       - name: Build NRF52
-        run: bin/build-nrf52.sh ${{ inputs.board }}
+        id: build
-
+        uses: ./.github/actions/build-variant
-      - name: Get release version string
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
         with:
-          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          github_token: ${{ secrets.GITHUB_TOKEN }}
-          overwrite: true
+          board: ${{ inputs.board }}
-          path: |
+          build-script-path: bin/build-nrf52.sh
+          artifact-paths: |
             release/*.hex
             release/*.uf2
             release/*.elf
             release/*.zip
+          arch: nrf52840

.github/workflows/build_raspbian.yml

@@ -13,8 +13,8 @@ jobs:
       - name: Install libbluetooth
         shell: bash
         run: |
-          apt-get update -y --fix-missing
+          sudo apt-get update -y --fix-missing
-          apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
+          sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
 
       - name: Checkout code
         uses: actions/checkout@v4

.github/workflows/build_raspbian_armv7l.yml

@@ -13,8 +13,8 @@ jobs:
       - name: Install libbluetooth
         shell: bash
         run: |
-          apt-get update -y --fix-missing
+          sudo apt-get update -y --fix-missing
-          apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
+          sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
 
       - name: Checkout code
         uses: actions/checkout@v4

.github/workflows/build_rpi2040.yml

@@ -12,22 +12,15 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
-      - name: Build base
-        id: base
-        uses: ./.github/actions/setup-base
 
       - name: Build Raspberry Pi 2040
-        run: ./bin/build-rpi2040.sh ${{ inputs.board }}
+        id: build
-
+        uses: ./.github/actions/build-variant
-      - name: Get release version string
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
         with:
-          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          github_token: ${{ secrets.GITHUB_TOKEN }}
-          overwrite: true
+          board: ${{ inputs.board }}
-          path: |
+          build-script-path: bin/build-rpi2040.sh
+          artifact-paths: |
             release/*.uf2
             release/*.elf
+          arch: rp2040

.github/workflows/build_stm32.yml

@@ -12,22 +12,16 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
-      - name: Build base
-        id: base
-        uses: ./.github/actions/setup-base
 
-      - name: Build STM32
+      - name: Build STM32WL
-        run: bin/build-stm32.sh ${{ inputs.board }}
+        id: build
-
+        uses: ./.github/actions/build-variant
-      - name: Get release version string
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
         with:
-          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          github_token: ${{ secrets.GITHUB_TOKEN }}
-          overwrite: true
+          board: ${{ inputs.board }}
-          path: |
+          build-script-path: bin/build-stm32.sh
+          artifact-paths: |
             release/*.hex
             release/*.bin
+            release/*.elf
+          arch: stm32

.github/workflows/generate-userprefs.yml

@@ -0,0 +1,35 @@
+name: Generate UsersPrefs JSON manifest
+
+on:
+  push:
+    paths:
+      - userPrefs.h
+    branches:
+      - master
+
+jobs:
+  generate-userprefs:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v4
+
+      - name: Install Clang
+        run: sudo apt-get install -y clang
+
+      - name: Install trunk
+        run: curl https://get.trunk.io -fsSL | bash
+
+      - name: Generate userPrefs.jsom
+        run: python3 ./bin/build-userprefs-json.py
+
+      - name: Trunk format json
+        run: trunk format userPrefs.json
+
+      - name: Commit userPrefs.json
+        run: |
+          git config --global user.email "actions@github.com"
+          git config --global user.name "GitHub Actions"
+          git add userPrefs.json
+          git commit -m "Update userPrefs.json"
+          git push

.github/workflows/main_matrix.yml

@@ -1,7 +1,7 @@
 name: CI
-#concurrency:
+concurrency:
-#  group: ${{ github.ref }}
+  group: ci-${{ github.head_ref || github.run_id }}
-#  cancel-in-progress: ${{ github.ref != 'refs/heads/master' }}
+  cancel-in-progress: true
 on:
   # # Triggers the workflow on push but only for the master branch
   push:
@@ -24,7 +24,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        arch: [esp32, esp32s3, esp32c3, nrf52840, rp2040, stm32, check]
+        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32, check]
     runs-on: ubuntu-latest
     steps:
       - id: checkout
@@ -32,13 +32,18 @@ jobs:
         name: Checkout base
       - id: jsonStep
         run: |
-          TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
+          if [[ "${{ github.head_ref }}" == "" ]]; then
-          echo "$TARGETS"
+            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
+          else  
+            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} quick)
+          fi
+          echo "Name: ${{ github.ref_name }} Base: ${{ github.base_ref }} Head: ${{ github.head_ref }} Ref: ${{ github.ref }} Targets: $TARGETS"
           echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
     outputs:
       esp32: ${{ steps.jsonStep.outputs.esp32 }}
       esp32s3: ${{ steps.jsonStep.outputs.esp32s3 }}
       esp32c3: ${{ steps.jsonStep.outputs.esp32c3 }}
+      esp32c6: ${{ steps.jsonStep.outputs.esp32c6 }}
       nrf52840: ${{ steps.jsonStep.outputs.nrf52840 }}
       rp2040: ${{ steps.jsonStep.outputs.rp2040 }}
       stm32: ${{ steps.jsonStep.outputs.stm32 }}
@@ -51,6 +56,7 @@ jobs:
       matrix: ${{ fromJson(needs.setup.outputs.check) }}
 
     runs-on: ubuntu-latest
+    if: ${{ github.event_name != 'workflow_dispatch' }}
     steps:
       - uses: actions/checkout@v4
       - name: Build base
@@ -86,6 +92,15 @@ jobs:
     with:
       board: ${{ matrix.board }}
 
+  build-esp32-c6:
+    needs: setup
+    strategy:
+      fail-fast: false
+      matrix: ${{ fromJson(needs.setup.outputs.esp32c6) }}
+    uses: ./.github/workflows/build_esp32_c6.yml
+    with:
+      board: ${{ matrix.board }}
+
   build-nrf52:
     needs: setup
     strategy:
@@ -124,6 +139,7 @@ jobs:
 
   after-checks:
     runs-on: ubuntu-latest
+    if: ${{ github.event_name != 'workflow_dispatch' }}
     needs: [check]
     steps:
       - name: Checkout code
@@ -136,18 +152,20 @@ jobs:
     permissions:
       contents: write
       pull-requests: write
+    strategy:
+      fail-fast: false
+      matrix:
+        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32]
     runs-on: ubuntu-latest
     needs:
       [
         build-esp32,
         build-esp32-s3,
         build-esp32-c3,
+        build-esp32-c6,
         build-nrf52,
         build-rpi2040,
         build-stm32,
-        package-raspbian,
-        package-raspbian-armv7l,
-        package-native,
       ]
     steps:
       - name: Checkout code
@@ -159,6 +177,7 @@ jobs:
       - uses: actions/download-artifact@v4
         with:
           path: ./
+          pattern: firmware-${{matrix.arch}}-*
           merge-multiple: true
 
       - name: Display structure of downloaded files
@@ -169,12 +188,12 @@ jobs:
         id: version
 
       - name: Move files up
-        run: mv -b -t ./ ./release/meshtasticd_linux_* ./bin/config-dist.yaml ./bin/device-*.sh ./bin/device-*.bat
+        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
         uses: actions/upload-artifact@v4
         with:
-          name: firmware-${{ steps.version.outputs.version }}
+          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}
           overwrite: true
           path: |
             ./firmware-*.bin
@@ -183,16 +202,15 @@ jobs:
             ./firmware-*-ota.zip
             ./device-*.sh
             ./device-*.bat
-            ./meshtasticd_linux_*
-            ./config-dist.yaml
             ./littlefs-*.bin
+            ./littlefswebui-*.bin
             ./bleota*bin
             ./Meshtastic_nRF52_factory_erase*.uf2
-          retention-days: 90
+          retention-days: 30
 
       - uses: actions/download-artifact@v4
         with:
-          name: firmware-${{ steps.version.outputs.version }}
+          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}
           merge-multiple: true
           path: ./output
 
@@ -206,32 +224,35 @@ jobs:
           chmod +x ./output/device-update.sh
 
       - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{ steps.version.outputs.version }}.zip ./output
+        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip ./output
 
       - name: Repackage in single elfs zip
         uses: actions/upload-artifact@v4
         with:
-          name: debug-elfs-${{ steps.version.outputs.version }}.zip
+          name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
           overwrite: true
           path: ./*.elf
           retention-days: 30
 
-      - name: Create request artifacts
+      - uses: scruplelesswizard/comment-artifact@main
-        continue-on-error: true # FIXME: Why are we getting 502, but things still work?
+        if: ${{ github.event_name == 'pull_request' }}
-        if: ${{ github.event_name == 'pull_request_target' || github.event_name == 'pull_request' }}
-        uses: gavv/pull-request-artifacts@v2.1.0
         with:
-          commit: ${{ (github.event.pull_request_target || github.event.pull_request).head.sha }}
+          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}
-          repo-token: ${{ secrets.GITHUB_TOKEN }}
+          description: "Download firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip. This artifact will be available for 90 days from creation"
-          artifacts-token: ${{ secrets.ARTIFACTS_TOKEN }}
+          github-token: ${{ secrets.GITHUB_TOKEN }}
-          artifacts-repo: meshtastic/artifacts
-          artifacts-branch: device
-          artifacts: ./firmware-${{ steps.version.outputs.version }}.zip
 
   release-artifacts:
     runs-on: ubuntu-latest
     if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [gather-artifacts, after-checks]
+    outputs:
+      upload_url: ${{ steps.create_release.outputs.upload_url }}
+    needs:
+      [
+        gather-artifacts,
+        package-raspbian,
+        package-raspbian-armv7l,
+        package-native,
+      ]
     steps:
       - name: Checkout
         uses: actions/checkout@v4
@@ -245,42 +266,6 @@ jobs:
         run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
-      - uses: actions/download-artifact@v4
-        with:
-          name: firmware-${{ steps.version.outputs.version }}
-          merge-multiple: true
-          path: ./output
-
-      - uses: actions/download-artifact@v4
-        with:
-          pattern: meshtasticd_${{ steps.version.outputs.version }}_*.deb
-          merge-multiple: true
-          path: ./output
-
-      - name: Display structure of downloaded files
-        run: ls -R
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{ steps.version.outputs.version }}.zip ./output -x *.deb
-
-      - uses: actions/download-artifact@v4
-        with:
-          name: debug-elfs-${{ steps.version.outputs.version }}.zip
-          merge-multiple: true
-          path: ./elfs
-
-      - name: Zip Elfs
-        run: zip -j -9 -r ./debug-elfs-${{ steps.version.outputs.version }}.zip ./elfs
-
-      # For diagnostics
-      - name: Show artifacts
-        run: ls -lR
-
       - name: Create release
         uses: actions/create-release@v1
         id: create_release
@@ -294,25 +279,16 @@ jobs:
         env:
           GITHUB_TOKEN: ${{ github.token }}
 
-      - name: Add bins to release
+      - name: Download deb files
-        uses: actions/upload-release-asset@v1
+        uses: actions/download-artifact@v4
-        env:
-          GITHUB_TOKEN: ${{ github.token }}
         with:
-          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          pattern: meshtasticd_${{ steps.version.outputs.version }}_*.deb
-          asset_path: ./firmware-${{ steps.version.outputs.version }}.zip
+          merge-multiple: true
-          asset_name: firmware-${{ steps.version.outputs.version }}.zip
+          path: ./output
-          asset_content_type: application/zip
 
-      - name: Add debug elfs to release
+      # For diagnostics
-        uses: actions/upload-release-asset@v1
+      - name: Display structure of downloaded files
-        env:
+        run: ls -lR
-          GITHUB_TOKEN: ${{ github.token }}
-        with:
-          upload_url: ${{ steps.create_release.outputs.upload_url }}
-          asset_path: ./debug-elfs-${{ steps.version.outputs.version }}.zip
-          asset_name: debug-elfs-${{ steps.version.outputs.version }}.zip
-          asset_content_type: application/zip
 
       - name: Add raspbian aarch64 .deb
         uses: actions/upload-release-asset@v1
@@ -349,7 +325,79 @@ jobs:
           bin/bump_version.py
 
       - name: Create version.properties pull request
-        uses: peter-evans/create-pull-request@v6
+        uses: peter-evans/create-pull-request@v7
         with:
+          title: Bump version.properties
           add-paths: |
             version.properties
+
+  release-firmware:
+    strategy:
+      fail-fast: false
+      matrix:
+        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32]
+    runs-on: ubuntu-latest
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    needs: [release-artifacts]
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+
+      - name: Setup Python
+        uses: actions/setup-python@v5
+        with:
+          python-version: 3.x
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - uses: actions/download-artifact@v4
+        with:
+          pattern: firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}
+          merge-multiple: true
+          path: ./output
+
+      - name: Display structure of downloaded files
+        run: ls -lR
+
+      - name: Device scripts permissions
+        run: |
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
+
+      - name: Zip firmware
+        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip ./output
+
+      - uses: actions/download-artifact@v4
+        with:
+          name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
+          merge-multiple: true
+          path: ./elfs
+
+      - name: Zip firmware
+        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip ./elfs
+
+      # For diagnostics
+      - name: Display structure of downloaded files
+        run: ls -lR
+
+      - name: Add bins to release
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{needs.release-artifacts.outputs.upload_url}}
+          asset_path: ./firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
+          asset_name: firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
+          asset_content_type: application/zip
+
+      - name: Add debug elfs to release
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{needs.release-artifacts.outputs.upload_url}}
+          asset_path: ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
+          asset_name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
+          asset_content_type: application/zip

.github/workflows/package_amd64.yml

@@ -13,7 +13,7 @@ jobs:
     uses: ./.github/workflows/build_native.yml
 
   package-native:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     needs: build-native
     steps:
       - name: Checkout code
@@ -50,11 +50,18 @@ jobs:
           mkdir -p .debpkg/usr/share/doc/meshtasticd/web
           mkdir -p .debpkg/usr/sbin
           mkdir -p .debpkg/etc/meshtasticd
+          mkdir -p .debpkg/etc/meshtasticd/config.d
+          mkdir -p .debpkg/etc/meshtasticd/available.d
           mkdir -p .debpkg/usr/lib/systemd/system/
           tar -xf build.tar -C .debpkg/usr/share/doc/meshtasticd/web
+          shopt -s dotglob nullglob
+          if [ -d .debpkg/usr/share/doc/meshtasticd/web/build ]; then mv  .debpkg/usr/share/doc/meshtasticd/web/build/* .debpkg/usr/share/doc/meshtasticd/web/; fi
+          if [ -d .debpkg/usr/share/doc/meshtasticd/web/build ]; then rmdir .debpkg/usr/share/doc/meshtasticd/web/build; fi
+          if [ -d .debpkg/usr/share/doc/meshtasticd/web/.DS_Store]; then rm -f .debpkg/usr/share/doc/meshtasticd/web/.DS_Store; fi
           gunzip .debpkg/usr/share/doc/meshtasticd/web/*.gz
           cp release/meshtasticd_linux_x86_64 .debpkg/usr/sbin/meshtasticd
           cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
+          cp bin/config.d/* .debpkg/etc/meshtasticd/available.d/
           chmod +x .debpkg/usr/sbin/meshtasticd
           cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
           echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles

.github/workflows/package_raspbian.yml

@@ -13,7 +13,7 @@ jobs:
     uses: ./.github/workflows/build_raspbian.yml
 
   package-raspbian:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     needs: build-raspbian
     steps:
       - name: Checkout code
@@ -50,11 +50,18 @@ jobs:
           mkdir -p .debpkg/usr/share/doc/meshtasticd/web
           mkdir -p .debpkg/usr/sbin
           mkdir -p .debpkg/etc/meshtasticd
+          mkdir -p .debpkg/etc/meshtasticd/config.d
+          mkdir -p .debpkg/etc/meshtasticd/available.d
           mkdir -p .debpkg/usr/lib/systemd/system/
           tar -xf build.tar -C .debpkg/usr/share/doc/meshtasticd/web
+          shopt -s dotglob nullglob
+          if [ -d .debpkg/usr/share/doc/meshtasticd/web/build ]; then mv  .debpkg/usr/share/doc/meshtasticd/web/build/* .debpkg/usr/share/doc/meshtasticd/web/; fi
+          if [ -d .debpkg/usr/share/doc/meshtasticd/web/build ]; then rmdir .debpkg/usr/share/doc/meshtasticd/web/build; fi
+          if [ -d .debpkg/usr/share/doc/meshtasticd/web/.DS_Store]; then rm -f .debpkg/usr/share/doc/meshtasticd/web/.DS_Store; fi
           gunzip .debpkg/usr/share/doc/meshtasticd/web/*.gz
           cp release/meshtasticd_linux_aarch64 .debpkg/usr/sbin/meshtasticd
           cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
+          cp bin/config.d/* .debpkg/etc/meshtasticd/available.d/
           chmod +x .debpkg/usr/sbin/meshtasticd
           cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
           echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles

.github/workflows/package_raspbian_armv7l.yml

@@ -13,7 +13,7 @@ jobs:
     uses: ./.github/workflows/build_raspbian_armv7l.yml
 
   package-raspbian_armv7l:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     needs: build-raspbian_armv7l
     steps:
       - name: Checkout code
@@ -50,11 +50,18 @@ jobs:
           mkdir -p .debpkg/usr/share/doc/meshtasticd/web
           mkdir -p .debpkg/usr/sbin
           mkdir -p .debpkg/etc/meshtasticd
+          mkdir -p .debpkg/etc/meshtasticd/config.d
+          mkdir -p .debpkg/etc/meshtasticd/available.d
           mkdir -p .debpkg/usr/lib/systemd/system/
           tar -xf build.tar -C .debpkg/usr/share/doc/meshtasticd/web
+          shopt -s dotglob nullglob
+          if [ -d .debpkg/usr/share/doc/meshtasticd/web/build ]; then mv  .debpkg/usr/share/doc/meshtasticd/web/build/* .debpkg/usr/share/doc/meshtasticd/web/; fi
+          if [ -d .debpkg/usr/share/doc/meshtasticd/web/build ]; then rmdir .debpkg/usr/share/doc/meshtasticd/web/build; fi
+          if [ -d .debpkg/usr/share/doc/meshtasticd/web/.DS_Store]; then rm -f .debpkg/usr/share/doc/meshtasticd/web/.DS_Store; fi
           gunzip .debpkg/usr/share/doc/meshtasticd/web/*.gz
           cp release/meshtasticd_linux_armv7l .debpkg/usr/sbin/meshtasticd
           cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
+          cp bin/config.d/* .debpkg/etc/meshtasticd/available.d/
           chmod +x .debpkg/usr/sbin/meshtasticd
           cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
           echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles

.github/workflows/sec_sast_semgrep_cron.yml

@@ -12,7 +12,7 @@ jobs:
   semgrep-full:
     runs-on: ubuntu-latest
     container:
-      image: returntocorp/semgrep
+      image: semgrep/semgrep
 
     steps:
       # step 1

.github/workflows/sec_sast_semgrep_pull.yml

@@ -4,9 +4,9 @@ on: pull_request
 
 jobs:
   semgrep-diff:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     container:
-      image: returntocorp/semgrep
+      image: semgrep/semgrep
 
     steps:
       # step 1

.github/workflows/stale_bot.yml

@@ -0,0 +1,22 @@
+name: process stale Issues and PR's
+on:
+  schedule:
+    - cron: 0 6 * * *
+  workflow_dispatch: {}
+
+permissions:
+  issues: write
+  pull-requests: write
+  actions: write
+
+jobs:
+  stale_issues:
+    name: Close Stale Issues
+    runs-on: ubuntu-latest
+
+    steps:
+      - name: Stale PR+Issues
+        uses: actions/stale@v9.0.0
+        with:
+          exempt-issue-labels: pinned,3.0
+          exempt-pr-labels: pinned,3.0

.github/workflows/tests.yml

@@ -57,35 +57,50 @@ jobs:
           reporter: java-junit
 
   hardware-tests:
-    runs-on: ubuntu-latest
+    runs-on: test-runner
     steps:
       - name: Checkout code
         uses: actions/checkout@v4
 
+      # - uses: actions/setup-python@v5
+      #   with:
+      #     python-version: '3.10'
+
+      # pipx install "setuptools<72"
       - name: Upgrade python tools
         shell: bash
         run: |
-          python -m pip install --upgrade pip
+          pipx install adafruit-nrfutil
-          pip install -U --no-build-isolation --no-cache-dir "setuptools<72"
+          pipx install poetry
-          pip install -U platformio adafruit-nrfutil --no-build-isolation
+          pipx install meshtastic --pip-args=--pre
-          pip install -U poetry --no-build-isolation
+
-          pip install -U meshtastic --pre --no-build-isolation
+      - name: Install PlatformIO from script
+        shell: bash
+        run: |
+          curl -fsSL -o get-platformio.py https://raw.githubusercontent.com/platformio/platformio-core-installer/master/get-platformio.py
+          python3 get-platformio.py
 
       - name: Upgrade platformio
         shell: bash
         run: |
+          export PATH=$PATH:$HOME/.local/bin
           pio upgrade
 
+      - name: Setup Node
+        uses: actions/setup-node@v4
+        with:
+          node-version: 18
+
       - name: Setup pnpm
-        uses: pnpm/action-setup@v2
+        uses: pnpm/action-setup@v4
         with:
           version: latest
 
-      - name: Install Dependencies
+      - name: Install dependencies, setup devices and run
-        run: pnpm install
+        shell: bash
-
+        run: |
-      - name: Setup devices
+          git submodule update --init --recursive
-        run: pnpm run setup
+          cd meshtestic/
-
+          pnpm install
-      - name: Execute end to end tests on connected hardware
+          pnpm run setup
-        run: pnpm run test
+          pnpm run test

.github/workflows/trunk_format_pr.yml

@@ -0,0 +1,43 @@
+name: Run Trunk Fmt on PR Comment
+
+on:
+  issue_comment:
+    types: [created]
+
+jobs:
+  trunk-fmt:
+    if: github.event.issue.pull_request != null && contains(github.event.comment.body, 'trunk fmt')
+    runs-on: ubuntu-latest
+
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@v4
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Install trunk
+        run: curl https://get.trunk.io -fsSL | bash
+
+      - name: Run Trunk Fmt
+        run: trunk fmt
+
+      - name: Commit and push changes
+        run: |
+          git config --global user.name "github-actions[bot]"
+          git config --global user.email "github-actions[bot]@users.noreply.github.com"
+          git add .
+          git commit -m "Add firmware version ${{ steps.version.outputs.version }}"
+          git push
+
+      - name: Comment on PR
+        uses: actions/github-script@v7
+        with:
+          github-token: ${{ secrets.GITHUB_TOKEN }}
+          script: |
+            github.issues.createComment({
+              issue_number: context.issue.number,
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              body: '`trunk fmt` has been run on this PR.'
+            })

.github/workflows/update_protobufs.yml

@@ -1,4 +1,4 @@
-name: "Update protobufs and regenerate classes"
+name: Update protobufs and regenerate classes
 on: workflow_dispatch
 
 jobs:
@@ -17,17 +17,18 @@ jobs:
 
       - name: Download nanopb
         run: |
-          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.8-linux-x86.tar.gz
+          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.9-linux-x86.tar.gz
-          tar xvzf nanopb-0.4.8-linux-x86.tar.gz
+          tar xvzf nanopb-0.4.9-linux-x86.tar.gz
-          mv nanopb-0.4.8-linux-x86 nanopb-0.4.8
+          mv nanopb-0.4.9-linux-x86 nanopb-0.4.9
 
       - name: Re-generate protocol buffers
         run: |
           ./bin/regen-protos.sh
 
       - name: Create pull request
-        uses: peter-evans/create-pull-request@v6
+        uses: peter-evans/create-pull-request@v7
         with:
+          title: Update protobufs and classes
           add-paths: |
             protobufs
             src/mesh

.gitignore

@@ -1,6 +1,4 @@
 .pio
-main/configuration.h
-main/credentials.h
 
 # ignore vscode IDE settings files
 .vscode/*
@@ -32,4 +30,4 @@ release/
 .vscode/extensions.json
 /compile_commands.json
 src/mesh/raspihttp/certificate.pem
-src/mesh/raspihttp/private_key.pem
+src/mesh/raspihttp/private_key.pem

.trunk/trunk.yaml

@@ -1,34 +1,34 @@
 version: 0.1
 cli:
-  version: 1.22.3
+  version: 1.22.8
 plugins:
   sources:
     - id: trunk
-      ref: v1.6.2
+      ref: v1.6.4
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - trufflehog@3.81.9
+    - trufflehog@3.83.6
     - yamllint@1.35.1
-    - bandit@1.7.9
+    - bandit@1.7.10
-    - checkov@3.2.238
+    - checkov@3.2.287
-    - terrascan@1.19.1
+    - terrascan@1.19.9
-    - trivy@0.54.1
+    - trivy@0.56.2
     #- trufflehog@3.63.2-rc0
     - taplo@0.9.3
-    - ruff@0.6.2
+    - ruff@0.7.3
     - isort@5.13.2
-    - markdownlint@0.41.0
+    - markdownlint@0.42.0
     - oxipng@9.1.2
     - svgo@3.3.2
-    - actionlint@1.7.1
+    - actionlint@1.7.4
     - flake8@7.1.1
     - hadolint@2.12.0
     - shfmt@3.6.0
     - shellcheck@0.10.0
-    - black@24.8.0
+    - black@24.10.0
     - git-diff-check
-    - gitleaks@8.18.4
+    - gitleaks@8.21.1
     - clang-format@16.0.3
     - prettier@3.3.3
   ignore:

.vscode/extensions.json

@@ -2,9 +2,8 @@
     // See http://go.microsoft.com/fwlink/?LinkId=827846
     // for the documentation about the extensions.json format
     "recommendations": [
-        "platformio.platformio-ide"
+		"ms-vscode.cpptools",
+        "platformio.platformio-ide",
+        "trunk.io"
     ],
-    "unwantedRecommendations": [
-        "ms-vscode.cpptools-extension-pack"
-    ]
 }

CODE_OF_CONDUCT.md

@@ -0,0 +1,4 @@
+# Contributor Covenant Code of Conduct
+
+The Meshtastic Firmware project is subject to the code of conduct for the parent project, which can be found here: 
+https://meshtastic.org/docs/legal/conduct/

SECURITY.md

@@ -0,0 +1,12 @@
+# Security Policy
+
+## Supported Versions
+
+| Firmware Version | Supported          |
+| ---------------- | ------------------ |
+| 2.5.x            | :white_check_mark: |
+| <= 2.4.x         | :x:                |
+
+## Reporting a Vulnerability
+
+We support the private reporting of potential security vulnerabilities. Please go to the Security tab to file a report with a description of the potential vulnerability and reproduction scripts (preferred) or steps, and our developers will review.

arch/apollo3/apollo3.ini

@@ -0,0 +1,33 @@
+[apollo3_base]
+extends = arduino_base
+platform = https://github.com/nigelb/platform-apollo3blue.git#2e8a9895cf82f2836c483885e6f89b3f83d3ade4
+platform_packages=framework-arduinoapollo3@https://github.com/sparkfun/Arduino_Apollo3#a0d99c5fc9b1112d46a9d11c1339898d01e586c9
+build_type = debug
+build_flags =
+  ${arduino_base.build_flags}
+  -Isrc/platform/apollo3 -g
+  -I"${platformio.packages_dir}/framework-arduinoapollo3/libraries/SPI/src"
+  -DRADIOLIB_EEPROM_UNSUPPORTED
+  -DMESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
+build_src_filter = 
+  ${arduino_base.build_src_filter}
+  -<platform/nrf52>
+  -<platform/esp32/>
+  -<platform/rp2040>
+  -<platform/portduino>
+  -<platform/stm32wl>
+  -<nimble/>
+  -<mesh/api/>
+  -<mesh/http/>
+  -<mesh/wifi/>
+  -<modules/esp32>
+  -<mesh/eth/>
+  -<input>
+  -<buzz>
+  -<modules/Telemetry>
+lib_deps =
+  ${env.lib_deps}
+  charlesbaynham/OSFS@^1.2.3
+  rweather/Crypto
+lib_ignore = 
+  mathertel/OneButton

arch/esp32/esp32.ini

@@ -2,10 +2,16 @@
 [esp32_base]
 extends = arduino_base
 custom_esp32_kind = esp32
-platform = platformio/espressif32@6.7.0
+platform = platformio/espressif32@6.9.0
 
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/> -<mesh/raspihttp>
+  ${arduino_base.build_src_filter}
+  -<platform/nrf52/>
+  -<platform/stm32wl>
+  -<platform/rp2xx0>
+  -<platform/apollo3>
+  -<mesh/eth/>
+  -<mesh/raspihttp>
 
 upload_speed = 921600
 debug_init_break = tbreak setup
@@ -31,7 +37,7 @@ build_flags =
   -DCONFIG_BT_NIMBLE_ENABLED
   -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
   -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
-  -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=5120
+  -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=8192
   -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
   -DSERIAL_BUFFER_SIZE=4096
   -DLIBPAX_ARDUINO
@@ -43,10 +49,11 @@ lib_deps =
   ${arduino_base.lib_deps}
   ${networking_base.lib_deps}
   ${environmental_base.lib_deps}
+  ${radiolib_base.lib_deps}
   https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
   h2zero/NimBLE-Arduino@^1.4.2
-  https://github.com/dbSuS/libpax.git#7bcd3fcab75037505be9b122ab2b24cc5176b587
+  https://github.com/dbinfrago/libpax.git#3cdc0371c375676a97967547f4065607d4c53fd1
-  https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
+  lewisxhe/XPowersLib@^0.2.6
   https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
   rweather/Crypto@^0.4.0
 

arch/esp32/esp32c3.ini

@@ -1,5 +1,6 @@
 [esp32c3_base]
 extends = esp32_base
+
 custom_esp32_kind = esp32c3
 
 monitor_speed = 115200

arch/esp32/esp32c6.ini

@@ -0,0 +1,41 @@
+[esp32c6_base]
+extends = esp32_base
+platform = https://github.com/Jason2866/platform-espressif32.git#22faa566df8c789000f8136cd8d0aca49617af55
+build_flags =
+  ${arduino_base.build_flags}
+  -Wall
+  -Wextra
+  -Isrc/platform/esp32
+  -std=c++11
+  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
+  -DSERIAL_BUFFER_SIZE=4096
+  -DLIBPAX_ARDUINO
+  -DLIBPAX_WIFI
+  -DLIBPAX_BLE
+  -DMESHTASTIC_EXCLUDE_WEBSERVER
+  ;-DDEBUG_HEAP
+  ; TEMP
+  -DHAS_BLUETOOTH=0
+  -DMESHTASTIC_EXCLUDE_PAXCOUNTER
+  -DMESHTASTIC_EXCLUDE_BLUETOOTH
+
+lib_deps =
+  ${arduino_base.lib_deps}
+  ${networking_base.lib_deps}
+  ${environmental_base.lib_deps}
+  ${radiolib_base.lib_deps}
+  lewisxhe/XPowersLib@^0.2.6
+  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
+  rweather/Crypto@^0.4.0
+
+build_src_filter = 
+ ${esp32_base.build_src_filter} -<mesh/http> 
+
+monitor_speed = 460800
+monitor_filters = esp32_c3_exception_decoder
+
+lib_ignore =
+  NonBlockingRTTTL
+  NimBLE-Arduino
+  libpax
+  

arch/esp32/esp32s3.ini

@@ -1,6 +1,6 @@
 [esp32s3_base]
 extends = esp32_base
+
 custom_esp32_kind = esp32s3
 
 monitor_speed = 115200
-

arch/nrf52/nrf52.ini

@@ -14,13 +14,29 @@ build_flags =
   -Wno-unused-variable
   -Isrc/platform/nrf52
   -DLFS_NO_ASSERT                      ; Disable LFS assertions , see https://github.com/meshtastic/firmware/pull/3818
+  -DMESHTASTIC_EXCLUDE_AUDIO=1
+  -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
+  -DMAX_NUM_NODES=80
 
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2040> -<mesh/eth/> -<mesh/raspihttp>
+  ${arduino_base.build_src_filter}
+  -<platform/esp32/>
+  -<platform/stm32wl>
+  -<nimble/>
+  -<mesh/wifi/>
+  -<mesh/api/>
+  -<mesh/http/>
+  -<modules/esp32>
+  -<platform/rp2xx0>
+  -<mesh/eth/>
+  -<mesh/raspihttp>
+  -<platform/apollo3>
 
 lib_deps=
   ${arduino_base.lib_deps}
+  ${radiolib_base.lib_deps}
   rweather/Crypto@^0.4.0
 
 lib_ignore =
-  BluetoothOTA
+  BluetoothOTA
+  lvgl

arch/portduino/portduino.ini

@@ -1,6 +1,6 @@
 ; The Portduino based sim environment on top of any host OS, all hardware will be simulated
 [portduino_base]
-platform = https://github.com/meshtastic/platform-native.git#ad8112adf82ce1f5b917092cf32be07a077801a0
+platform = https://github.com/meshtastic/platform-native.git#bcd02436cfca91f7d28ad0f7dab977c6aaa781af
 framework = arduino
 
 build_src_filter = 
@@ -9,7 +9,8 @@ build_src_filter =
   -<nimble/> 
   -<platform/nrf52/> 
   -<platform/stm32wl/> 
-  -<platform/rp2040>
+  -<platform/rp2xx0>
+  -<platform/apollo3>
   -<mesh/wifi/>
   -<mesh/http/>
   +<mesh/raspihttp/>
@@ -23,8 +24,9 @@ build_src_filter =
 lib_deps =
   ${env.lib_deps}
   ${networking_base.lib_deps}
+  ${radiolib_base.lib_deps}
   rweather/Crypto@^0.4.0
-  https://github.com/lovyan03/LovyanGFX.git#5a39989aa2c9492572255b22f033843ec8900233
+  https://github.com/lovyan03/LovyanGFX.git#1401c28a47646fe00538d487adcb2eb3c72de805
 
 build_flags =
   ${arduino_base.build_flags}
@@ -32,6 +34,7 @@ build_flags =
   -Isrc/platform/portduino
   -DRADIOLIB_EEPROM_UNSUPPORTED
   -DPORTDUINO_LINUX_HARDWARE
+  -lstdc++fs
   -lbluetooth
   -lgpiod
-  -lyaml-cpp
+  -lyaml-cpp

arch/rp2xx0/rp2040.ini

@@ -0,0 +1,26 @@
+; Common settings for rp2040 Processor based targets
+[rp2040_base]
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git#19e30129fb1428b823be585c787dcb4ac0d9014c ; For arduino-pico 4.2.1
+extends = arduino_base
+platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#996c3bfab9758f12c07aa20cc6d352e630c16987 ; 4.2.1 with fix for sporadic hangs
+
+board_build.core = earlephilhower
+board_build.filesystem_size = 0.5m
+build_flags = 
+  ${arduino_base.build_flags} -Wno-unused-variable -Wcast-align
+  -Isrc/platform/rp2xx0
+  -Isrc/platform/rp2xx0/hardware_rosc/include
+  -Isrc/platform/rp2xx0/pico_sleep/include
+  -D__PLAT_RP2040__
+#  -D _POSIX_THREADS
+build_src_filter = 
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<modules/esp32> -<platform/nrf52/> -<platform/apollo3> -<platform/stm32wl> -<mesh/eth/> -<mesh/wifi/> -<mesh/http/> -<mesh/raspihttp>
+
+lib_ignore =
+  BluetoothOTA
+
+lib_deps =
+  ${arduino_base.lib_deps}
+  ${environmental_base.lib_deps}
+  ${radiolib_base.lib_deps}
+  rweather/Crypto

arch/rp2xx0/rp2350.ini

@@ -1,23 +1,35 @@
 ; Common settings for rp2040 Processor based targets
-[rp2040_base]
+[rp2350_base]
-platform = https://github.com/maxgerhardt/platform-raspberrypi.git#60d6ae81fcc73c34b1493ca9e261695e471bc0c2
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git#19e30129fb1428b823be585c787dcb4ac0d9014c ; For arduino-pico 4.2.1
 extends = arduino_base
-platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#3.7.2
+platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#96c3bfab9758f12c07aa20cc6d352e630c16987 ; 4.2.1 with fix for sporadic hangs
 
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
 build_flags = 
   ${arduino_base.build_flags} -Wno-unused-variable 
-  -Isrc/platform/rp2040
+  -Isrc/platform/rp2xx0
   -D__PLAT_RP2040__
 #  -D _POSIX_THREADS
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/> -<mesh/wifi/> -<mesh/http/> -<mesh/raspihttp>
+  ${arduino_base.build_src_filter}
+  -<platform/esp32/>
+  -<nimble/>
+  -<modules/esp32>
+  -<platform/nrf52/>
+  -<platform/stm32wl>
+  -<mesh/eth/>
+  -<mesh/wifi/>
+  -<mesh/http/>
+  -<platform/apollo3>
+  -<mesh/raspihttp>
 
 lib_ignore =
   BluetoothOTA
+  lvgl
 
 lib_deps =
   ${arduino_base.lib_deps}
   ${environmental_base.lib_deps}
+  ${radiolib_base.lib_deps}
   rweather/Crypto

arch/stm32/stm32.ini

@@ -1,7 +1,7 @@
 [stm32_base]
 extends = arduino_base
 platform = ststm32
-platform_packages = platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32.git#361a7fdb67e2a7104e99b4f42a802469eef8b129
+platform_packages = platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32.git#ea74156acd823b6d14739f389e6cdc648f8ee36e
 
 build_type = release
 
@@ -22,7 +22,7 @@ build_flags =
   -fdata-sections
   
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2040> -<mesh/raspihttp>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<platform/apollo3> -<mesh/raspihttp>
 
 board_upload.offset_address = 0x08000000
 upload_protocol = stlink
@@ -30,8 +30,9 @@ upload_protocol = stlink
 lib_deps =
   ${env.lib_deps}
   charlesbaynham/OSFS@^1.2.3
+  jgromes/RadioLib@7.0.2
   https://github.com/caveman99/Crypto.git#f61ae26a53f7a2d0ba5511625b8bf8eff3a35d5e
 
 lib_ignore =
-  https://github.com/mathertel/OneButton@~2.6.1
+  mathertel/OneButton@2.6.1
   Wire

bin/base64_to_hex.py

@@ -0,0 +1,33 @@
+import sys
+import base64
+
+def base64_to_hex_string(b64_string):
+    try:
+        # Decode the Base64 string to raw bytes
+        decoded_bytes = base64.b64decode(b64_string)
+    except Exception as e:
+        raise ValueError(f"Invalid Base64 input: {e}")
+    
+    # Check if the decoded result is exactly 32 bytes
+    if len(decoded_bytes) != 32:
+        raise ValueError("Decoded Base64 input must be exactly 32 bytes.")
+    
+    # Convert each byte to its hex representation
+    hex_values = [f"0x{byte:02x}" for byte in decoded_bytes]
+    
+    # Join the formatted hex values with commas
+    formatted_output = "{ " + ", ".join(hex_values) + " };"
+    return formatted_output
+
+if __name__ == "__main__":
+    # Check if a Base64 string was provided in command line arguments
+    if len(sys.argv) != 2:
+        print("Usage: python script.py <base64-string>")
+        sys.exit(1)
+    
+    b64_string = sys.argv[1]
+    try:
+        formatted_hex = base64_to_hex_string(b64_string)
+        print(formatted_hex)
+    except ValueError as e:
+        print(e)

bin/build-esp32.sh

@@ -35,6 +35,11 @@ cp $SRCBIN $OUTDIR/$basename-update.bin
 
 echo "Building Filesystem for ESP32 targets"
 pio run --environment $1 -t buildfs
+cp .pio/build/$1/littlefs.bin $OUTDIR/littlefswebui-$VERSION.bin
+# Remove webserver files from the filesystem and rebuild
+ls -l data/static # Diagnostic list of files
+rm -rf data/static
+pio run --environment $1 -t buildfs
 cp .pio/build/$1/littlefs.bin $OUTDIR/littlefs-$VERSION.bin
 cp bin/device-install.* $OUTDIR
 cp bin/device-update.* $OUTDIR

bin/build-native.sh

@@ -27,5 +27,4 @@ rm -r $OUTDIR/* || true
 platformio pkg update --environment native || platformioFailed
 pio run --environment native || platformioFailed
 cp .pio/build/native/program "$OUTDIR/meshtasticd_linux_$(uname -m)"
-cp bin/device-install.* $OUTDIR
+cp bin/native-install.* $OUTDIR
-cp bin/device-update.* $OUTDIR

bin/build-userprefs-json.py

@@ -0,0 +1,48 @@
+import json
+import subprocess
+import re
+
+def get_macros_from_header(header_file):
+    # Run clang to preprocess the header file and capture the output
+    result = subprocess.run(['clang', '-E', '-dM', header_file], capture_output=True, text=True)
+    if result.returncode != 0:
+        raise RuntimeError(f"Clang preprocessing failed: {result.stderr}")
+
+    # Extract macros from the output
+    macros = {}
+    macro_pattern = re.compile(r'#define\s+(\w+)\s+(.*)')
+    for line in result.stdout.splitlines():
+        match = macro_pattern.match(line) 
+        if match and 'USERPREFS_' in line and '_USERPREFS_' not in line:
+            macros[match.group(1)] = match.group(2)
+
+    return macros
+
+def write_macros_to_json(macros, output_file):
+    with open(output_file, 'w') as f:
+        json.dump(macros, f, indent=4)
+
+def main():
+    header_file = 'userPrefs.h'
+    output_file = 'userPrefs.json'
+    # Uncomment all macros in the header file
+    with open(header_file, 'r') as file:
+        lines = file.readlines()
+
+    uncommented_lines = []
+    for line in lines:
+        stripped_line = line.strip().replace('/*', '').replace('*/', '')
+        if stripped_line.startswith('//') and 'USERPREFS_' in stripped_line:
+            # Replace "//"
+            stripped_line = stripped_line.replace('//', '')
+        uncommented_lines.append(stripped_line + '\n')
+
+    with open(header_file, 'w') as file:
+        for line in uncommented_lines:
+                file.write(line)
+    macros = get_macros_from_header(header_file)
+    write_macros_to_json(macros, output_file)
+    print(f"Macros have been written to {output_file}")
+
+if __name__ == "__main__":
+    main()

bin/config-dist.yaml

@@ -1,14 +1,11 @@
+### Many device configs have been moved to /etc/meshtasticd/available.d
+### To activate, simply copy or link the appropriate file into /etc/meshtasticd/config.d
+
 ### Define your devices here using Broadcom pin numbering
 ### Uncomment the block that corresponds to your hardware
 ### Including the "Module:" line!
 ---
 Lora:
-#  Module: sx1262  # Waveshare SX126X XXXM
-#  DIO2_AS_RF_SWITCH: true
-#  CS: 21
-#  IRQ: 16
-#  Busy: 20
-#  Reset: 18
 
 #  Module: sx1262  # Waveshare SX1302 LISTEN ONLY AT THIS TIME!
 #  CS: 7
@@ -19,6 +16,7 @@ Lora:
 #  CS: 0
 #  IRQ: 10
 #  Busy: 11
+#  DIO2_AS_RF_SWITCH: true
 #  spidev: spidev0.1
 
 #  Module: RF95  # Adafruit RFM9x
@@ -83,17 +81,6 @@ I2C:
 
 Display:
 
-### Waveshare 2.8inch RPi LCD
-#  Panel: ST7789
-#  CS: 8
-#  DC: 22        # Data/Command pin
-#  Backlight: 18
-#  Width: 240
-#  Height: 320
-#  Reset: 27
-#  Rotate: true
-#  Invert: true
-
 ### Waveshare 1.44inch LCD HAT
 #  Panel: ST7735S
 #  CS: 8         #Chip Select
@@ -113,6 +100,29 @@ Display:
 #  Height: 320
 #  Rotate: true
 
+### SHCHV 3.5 RPi TFT+Touchscreen
+#  Panel: ILI9486
+#  spidev: spidev0.0
+#  BusFrequency: 30000000
+#  DC: 24
+#  Reset: 25
+#  Width: 320
+#  Height: 480
+#  OffsetRotate: 2
+
+### TZT 2.0 Inch TFT Display ST7789V 240RGBx320
+#  Panel: ST7789
+#  spidev: spidev0.0
+#  # CS: 8     # can be freely chosen
+#  BusFrequency: 80000000
+#  DC: 24      # can be freely chosen
+#  Width: 320
+#  Height: 240
+#  Reset: 25   # can be freely chosen
+#  Rotate: true
+#  OffsetRotate: 1
+#  Invert: true
+
 ### You can also specify the spi device for the display to use
 # spidev: spidev0.0
 
@@ -127,10 +137,6 @@ Touchscreen:
 #  IRQ: 24
 #  I2CAddr: 0x38
 
-#  Module: XPT2046 # Waveshare 2.8inch
-#  CS: 7
-#  IRQ: 17
-
 ### You can also specify the spi device for the touchscreen to use
 # spidev: spidev0.0
 
@@ -154,3 +160,4 @@ Webserver:
 General:
   MaxNodes: 200
   MaxMessageQueue: 100
+  ConfigDirectory: /etc/meshtasticd/config.d/

bin/config.d/display-waveshare-2.8.yaml

@@ -0,0 +1,18 @@
+Display:
+
+### Waveshare 2.8inch RPi LCD
+  Panel: ST7789
+  CS: 8
+  DC: 22        # Data/Command pin
+  Backlight: 18
+  Width: 240
+  Height: 320
+  Reset: 27
+  Rotate: true
+  Invert: true
+
+Touchscreen:
+### Note, at least for now, the touchscreen must have a CS pin defined, even if you let Linux manage the CS switching.
+  Module: XPT2046 # Waveshare 2.8inch
+  CS: 7
+  IRQ: 17

bin/config.d/lora-MeshAdv-900M30S.yaml

@@ -0,0 +1,9 @@
+Lora:
+  Module: sx1262
+  CS: 21
+  IRQ: 16
+  Busy: 20
+  Reset: 18
+  TXen: 13
+  RXen: 12
+  DIO3_TCXO_VOLTAGE: true

bin/config.d/lora-waveshare-sxxx.yaml

@@ -0,0 +1,8 @@
+Lora:
+  Module: sx1262  # Waveshare SX126X XXXM
+  DIO2_AS_RF_SWITCH: true
+  CS: 21
+  IRQ: 16
+  Busy: 20
+  Reset: 18
+  SX126X_ANT_SW: 6

bin/device-install.bat

@@ -1,16 +1,26 @@
 @ECHO OFF
 
 set PYTHON=python
+set WEB_APP=0
+
+:: Determine the correct esptool command to use
+where esptool >nul 2>&1
+if %ERRORLEVEL% EQU 0 (
+    set "ESPTOOL_CMD=esptool"
+) else (
+    set "ESPTOOL_CMD=%PYTHON% -m esptool"
+)
 
 goto GETOPTS
 :HELP
-echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME]
+echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME] [--web]
 echo Flash image file to device, but first erasing and writing system information
 echo.
 echo     -h               Display this help and exit
 echo     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerrous).
 echo     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: %PYTHON%)
 echo     -f FILENAME      The .bin file to flash.  Custom to your device type and region.
+echo     --web            Flash WEB APP.
 goto EOF
 
 :GETOPTS
@@ -19,37 +29,44 @@ if /I "%1"=="--help" goto HELP
 if /I "%1"=="-F" set "FILENAME=%2" & SHIFT
 if /I "%1"=="-p" set ESPTOOL_PORT=%2 & SHIFT
 if /I "%1"=="-P" set PYTHON=%2 & SHIFT
+if /I "%1"=="--web" set WEB_APP=1 & SHIFT
 SHIFT
 IF NOT "__%1__"=="____" goto GETOPTS
 
 IF "__%FILENAME%__" == "____" (
     echo "Missing FILENAME"
-	goto HELP
+    goto HELP
 )
 IF EXIST %FILENAME% IF x%FILENAME:update=%==x%FILENAME% (
     echo Trying to flash update %FILENAME%, but first erasing and writing system information"
-	%PYTHON% -m esptool --baud 115200 erase_flash
+    %ESPTOOL_CMD% --baud 115200 erase_flash
-	%PYTHON% -m esptool --baud 115200 write_flash 0x00 %FILENAME%
+    %ESPTOOL_CMD% --baud 115200 write_flash 0x00 %FILENAME%
     
     @REM Account for S3 and C3 board's different OTA partition
     IF x%FILENAME:s3=%==x%FILENAME% IF x%FILENAME:v3=%==x%FILENAME% IF x%FILENAME:t-deck=%==x%FILENAME% IF x%FILENAME:wireless-paper=%==x%FILENAME% IF x%FILENAME:wireless-tracker=%==x%FILENAME% IF x%FILENAME:station-g2=%==x%FILENAME% IF x%FILENAME:unphone=%==x%FILENAME% (
         IF x%FILENAME:esp32c3=%==x%FILENAME% (
-            %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota.bin
+            %ESPTOOL_CMD% --baud 115200 write_flash 0x260000 bleota.bin
         ) else (
-            %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota-c3.bin
+            %ESPTOOL_CMD% --baud 115200 write_flash 0x260000 bleota-c3.bin
         )
-	) else (
+    ) else (
-        %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota-s3.bin
+        %ESPTOOL_CMD% --baud 115200 write_flash 0x260000 bleota-s3.bin
     )
-    for %%f in (littlefs-*.bin) do (
+    IF %WEB_APP%==1 (
-        %PYTHON% -m esptool --baud 115200 write_flash 0x300000 %%f
+        for %%f in (littlefswebui-*.bin) do (
+            %ESPTOOL_CMD% --baud 115200 write_flash 0x300000 %%f
+        )
+    ) else (
+        for %%f in (littlefs-*.bin) do (
+            %ESPTOOL_CMD% --baud 115200 write_flash 0x300000 %%f
+        )
     )
 ) else (
     echo "Invalid file: %FILENAME%"
-	goto HELP
+    goto HELP
 ) else (
     echo "Invalid file: %FILENAME%"
-	goto HELP
+    goto HELP
 )
 
 :EOF

bin/device-install.sh

@@ -1,22 +1,45 @@
 #!/bin/sh
 
 PYTHON=${PYTHON:-$(which python3 python | head -n 1)}
+WEB_APP=false
+
+# Determine the correct esptool command to use
+if "$PYTHON" -m esptool version >/dev/null 2>&1; then
+    ESPTOOL_CMD="$PYTHON -m esptool"
+elif command -v esptool >/dev/null 2>&1; then
+    ESPTOOL_CMD="esptool"
+elif command -v esptool.py >/dev/null 2>&1; then
+    ESPTOOL_CMD="esptool.py"
+else
+    echo "Error: esptool not found"
+    exit 1
+fi
 
 set -e
 
 # Usage info
 show_help() {
 	cat <<EOF
-Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME]
+Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME] [--web]
 Flash image file to device, but first erasing and writing system information"
 
     -h               Display this help and exit
     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
     -f FILENAME      The .bin file to flash.  Custom to your device type and region.
+    --web            Flash WEB APP.
 
 EOF
 }
+# Preprocess long options like --web
+for arg in "$@"; do
+    case "$arg" in
+        --web)
+            WEB_APP=true
+            shift # Remove this argument from the list
+            ;;
+    esac
+done
 
 while getopts ":hp:P:f:" opt; do
 	case "${opt}" in
@@ -49,19 +72,23 @@ shift "$((OPTIND - 1))"
 
 if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
 	echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
-	"$PYTHON" -m esptool erase_flash
+	$ESPTOOL_CMD erase_flash
-	"$PYTHON" -m esptool write_flash 0x00 ${FILENAME}
+	$ESPTOOL_CMD write_flash 0x00 ${FILENAME}
 	# Account for S3 board's different OTA partition
 	if [ -n "${FILENAME##*"s3"*}" ] && [ -n "${FILENAME##*"-v3"*}" ] && [ -n "${FILENAME##*"t-deck"*}" ] && [ -n "${FILENAME##*"wireless-paper"*}" ] && [ -n "${FILENAME##*"wireless-tracker"*}" ] && [ -n "${FILENAME##*"station-g2"*}" ] && [ -n "${FILENAME##*"unphone"*}" ]; then
 		if [ -n "${FILENAME##*"esp32c3"*}" ]; then
-			"$PYTHON" -m esptool write_flash 0x260000 bleota.bin
+			$ESPTOOL_CMD write_flash 0x260000 bleota.bin
 		else
-			"$PYTHON" -m esptool write_flash 0x260000 bleota-c3.bin
+			$ESPTOOL_CMD write_flash 0x260000 bleota-c3.bin
 		fi
 	else
-		"$PYTHON" -m esptool write_flash 0x260000 bleota-s3.bin
+		$ESPTOOL_CMD write_flash 0x260000 bleota-s3.bin
+	fi
+	if [ "$WEB_APP" = true ]; then
+		$ESPTOOL_CMD write_flash 0x300000 littlefswebui-*.bin
+	else
+		$ESPTOOL_CMD write_flash 0x300000 littlefs-*.bin
 	fi
-	"$PYTHON" -m esptool write_flash 0x300000 littlefs-*.bin
 
 else
 	show_help

bin/device-update.bat

@@ -2,6 +2,14 @@
 
 set PYTHON=python
 
+:: Determine the correct esptool command to use
+where esptool >nul 2>&1
+if %ERRORLEVEL% EQU 0 (
+    set "ESPTOOL_CMD=esptool"
+) else (
+    set "ESPTOOL_CMD=%PYTHON% -m esptool"
+)
+
 goto GETOPTS
 :HELP
 echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME]
@@ -24,17 +32,17 @@ IF NOT "__%1__"=="____" goto GETOPTS
 
 IF "__%FILENAME%__" == "____" (
     echo "Missing FILENAME"
-	goto HELP
+    goto HELP
 )
 IF EXIST %FILENAME% IF NOT x%FILENAME:update=%==x%FILENAME% (
     echo Trying to flash update %FILENAME%
-    %PYTHON% -m esptool --baud 115200 write_flash 0x10000 %FILENAME%
+    %ESPTOOL_CMD% --baud 115200 write_flash 0x10000 %FILENAME%
 ) else (
     echo "Invalid file: %FILENAME%"
-	goto HELP
+    goto HELP
 ) else (
     echo "Invalid file: %FILENAME%"
-	goto HELP
+    goto HELP
 )
 
 :EOF

bin/device-update.sh

@@ -2,6 +2,18 @@
 
 PYTHON=${PYTHON:-$(which python3 python|head -n 1)}
 
+# Determine the correct esptool command to use
+if "$PYTHON" -m esptool version >/dev/null 2>&1; then
+    ESPTOOL_CMD="$PYTHON -m esptool"
+elif command -v esptool >/dev/null 2>&1; then
+    ESPTOOL_CMD="esptool"
+elif command -v esptool.py >/dev/null 2>&1; then
+    ESPTOOL_CMD="esptool.py"
+else
+    echo "Error: esptool not found"
+    exit 1
+fi
+
 # Usage info
 show_help() {
 cat << EOF
@@ -9,7 +21,7 @@ Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME]
 Flash image file to device, leave existing system intact."
 
     -h               Display this help and exit
-    -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerrous).
+    -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
     -f FILENAME      The *update.bin file to flash.  Custom to your device type.
     
@@ -30,7 +42,7 @@ while getopts ":hp:P:f:" opt; do
         f)  FILENAME=${OPTARG}
             ;;
         *)
- 	    echo "Invalid flag."
+ 	        echo "Invalid flag."
             show_help >&2
             exit 1
             ;;
@@ -45,7 +57,7 @@ shift "$((OPTIND-1))"
 
 if [ -f "${FILENAME}" ] && [ -z "${FILENAME##*"update"*}" ]; then
 	printf "Trying to flash update ${FILENAME}"
-	$PYTHON -m esptool --baud 115200 write_flash 0x10000 ${FILENAME}
+	$ESPTOOL_CMD --baud 115200 write_flash 0x10000 ${FILENAME}
 else
 	show_help
 	echo "Invalid file: ${FILENAME}"

bin/generate_ci_matrix.py

@@ -6,6 +6,7 @@ import configparser
 import json
 import os
 import sys
+import random
 
 rootdir = "variants/"
 
@@ -39,5 +40,7 @@ for subdir, dirs, files in os.walk(rootdir):
                             "check" in options
                         ):
                             outlist.append(section)
-
+if ("quick" in options) & (len(outlist) > 3):
-print(json.dumps(outlist))
+    print(json.dumps(random.sample(outlist, 3)))
+else:
+    print(json.dumps(outlist))

bin/meshtasticd.service

@@ -1,12 +1,16 @@
 [Unit]
 Description=Meshtastic Native Daemon
 After=network-online.target
+StartLimitInterval=200
+StartLimitBurst=5
 
 [Service]
 User=root
 Group=root
 Type=simple
 ExecStart=/usr/sbin/meshtasticd
+Restart=always
+RestartSec=3
 
 [Install]
-WantedBy=multi-user.target
+WantedBy=multi-user.target

bin/native-install.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 cp "release/meshtasticd_linux_$(uname -m)" /usr/sbin/meshtasticd
-mkdir /etc/meshtasticd
+mkdir -p /etc/meshtasticd
 if [[ -f "/etc/meshtasticd/config.yaml" ]]; then
 	cp bin/config-dist.yaml /etc/meshtasticd/config-upgrade.yaml
 else

bin/platformio-custom.py

@@ -88,12 +88,13 @@ Import("projenv")
 
 prefsLoc = projenv["PROJECT_DIR"] + "/version.properties"
 verObj = readProps(prefsLoc)
-print("Using meshtastic platformio-custom.py, firmware version " + verObj["long"])
+print("Using meshtastic platformio-custom.py, firmware version " + verObj["long"] + " on " + env.get("PIOENV"))
 
 # General options that are passed to the C and C++ compilers
 projenv.Append(
     CCFLAGS=[
         "-DAPP_VERSION=" + verObj["long"],
         "-DAPP_VERSION_SHORT=" + verObj["short"],
+        "-DAPP_ENV=" + env.get("PIOENV"),
     ]
 )

bin/regen-protos.bat

@@ -1 +1 @@
-cd protobufs && ..\nanopb-0.4.8\generator-bin\protoc.exe --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:..\src\mesh\generated" -I=..\protobufs\ ..\protobufs\meshtastic\*.proto
+cd protobufs && ..\nanopb-0.4.9\generator-bin\protoc.exe --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:..\src\mesh\generated" -I=..\protobufs\ ..\protobufs\meshtastic\*.proto

bin/regen-protos.sh

@@ -2,10 +2,10 @@
 
 set -e
 
-echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.8 to be located in the"
+echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.9 to be located in the"
 echo "firmware root directory if the following step fails, you should download the correct"
-echo "prebuilt binaries for your computer into nanopb-0.4.8"
+echo "prebuilt binaries for your computer into nanopb-0.4.9"
 
 # the nanopb tool seems to require that the .options file be in the current directory!
 cd protobufs
-../nanopb-0.4.8/generator-bin/protoc --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:../src/mesh/generated/" -I=../protobufs meshtastic/*.proto
+../nanopb-0.4.9/generator-bin/protoc --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:../src/mesh/generated/" -I=../protobufs meshtastic/*.proto

boards/bpi_picow_esp32_s3.json

@@ -28,6 +28,8 @@
     "flash_size": "8MB",
     "maximum_ram_size": 327680,
     "maximum_size": 8388608,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
     "require_upload_port": true,
     "speed": 921600
   },

boards/heltec_mesh_node_t114.json

@@ -5,7 +5,7 @@
     },
     "core": "nRF5",
     "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_PCA10056 -DNRF52840_XXAA",
+    "extra_flags": "-DHELTEC_T114 -DNRF52840_XXAA",
     "f_cpu": "64000000L",
     "hwids": [
       ["0x239A", "0x4405"],

boards/icarus.json

@@ -0,0 +1,41 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=0"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x2886", "0x0059"]],
+    "mcu": "esp32s3",
+    "variant": "icarus"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "icarus",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 8388608,
+    "maximum_size": 8388608,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://icarus.azlan.works",
+  "vendor": "Muhammad Shah"
+}

boards/lora-relay-v1.json

@@ -1,47 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_LORA_RELAY_V1 -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [["0x239A", "0x4404"]],
-    "usb_product": "LORA_RELAY",
-    "mcu": "nrf52840",
-    "variant": "lora_relay_v1",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "Meshtastic Lora Relay V1 (Adafruit BSP)",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "require_upload_port": true,
-    "speed": 115200,
-    "protocol": "jlink",
-    "protocols": ["jlink", "nrfjprog", "stlink"]
-  },
-  "url": "https://github.com/BigCorvus/SX1262-LoRa-BLE-Relay",
-  "vendor": "BigCorvus"
-}

boards/lora-relay-v2.json

@@ -1,47 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_LORA_RELAY_V2 -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [["0x239A", "0x4406"]],
-    "usb_product": "LORA_RELAY",
-    "mcu": "nrf52840",
-    "variant": "lora_relay_v2",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "Meshtastic Lora Relay V1 (Adafruit BSP)",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "require_upload_port": true,
-    "speed": 115200,
-    "protocol": "jlink",
-    "protocols": ["jlink", "nrfjprog", "stlink"]
-  },
-  "url": "https://github.com/BigCorvus/SX1262-LoRa-BLE-Relay",
-  "vendor": "BigCorvus"
-}

boards/lora_isp4520.json

@@ -1,40 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52832_s132_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DNRF52832_XXAA -DNRF52",
-    "f_cpu": "64000000L",
-    "mcu": "nrf52832",
-    "variant": "lora_isp4520",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS132",
-      "sd_name": "s132",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B7"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52832_xxAA",
-    "svd_path": "nrf52.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "lora ISP4520",
-  "upload": {
-    "maximum_ram_size": 65536,
-    "maximum_size": 524288,
-    "require_upload_port": true,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"]
-  },
-  "url": "",
-  "vendor": "PsiSoft"
-}

boards/me25ls01-4y10td.json

@@ -5,7 +5,7 @@
     },
     "core": "nRF5",
     "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_WIO_WM1110 -DNRF52840_XXAA",
+    "extra_flags": "-DME25LS01_4Y10TD -DNRF52840_XXAA",
     "f_cpu": "64000000L",
     "hwids": [
       ["0x239A", "0x8029"],

boards/ms24sf1.json

@@ -5,7 +5,7 @@
     },
     "core": "nRF5",
     "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_WIO_WM1110 -DNRF52840_XXAA",
+    "extra_flags": "-DMS24SF1 -DNRF52840_XXAA",
     "f_cpu": "64000000L",
     "hwids": [
       ["0x239A", "0x8029"],

boards/nordic_pca10059.json

@@ -5,7 +5,7 @@
     },
     "core": "nRF5",
     "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+    "extra_flags": "-DNORDIC_PCA10059 -DNRF52840_XXAA",
     "f_cpu": "64000000L",
     "hwids": [
       ["0x239A", "0x8029"],

boards/nrf52840_dk_modified.json

@@ -1,47 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s113_v7.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_PCA10056 -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [["0x239A", "0x4404"]],
-    "usb_product": "nrf52840dk",
-    "mcu": "nrf52840",
-    "variant": "pca10056-rc-clock",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "A modified NRF52840-DK devboard (Adafruit BSP)",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "require_upload_port": true,
-    "speed": 115200,
-    "protocol": "jlink",
-    "protocols": ["jlink", "nrfjprog", "stlink"]
-  },
-  "url": "https://meshtastic.org/",
-  "vendor": "Nordic Semi"
-}

boards/ppr.json

@@ -1,47 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_PPR -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [["0x239A", "0x4403"]],
-    "usb_product": "PPR",
-    "mcu": "nrf52840",
-    "variant": "ppr",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "Meshtastic PPR (Adafruit BSP)",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "require_upload_port": true,
-    "speed": 115200,
-    "protocol": "jlink",
-    "protocols": ["jlink", "nrfjprog", "stlink"]
-  },
-  "url": "https://meshtastic.org/",
-  "vendor": "Othernet"
-}

boards/ppr1.json

@@ -1,47 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52833_s113_v7.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52833_PPR -DNRF52833_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [["0x239A", "0x4406"]],
-    "usb_product": "PPR",
-    "mcu": "nrf52833",
-    "variant": "ppr",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS113",
-      "sd_name": "s113",
-      "sd_version": "7.2.0",
-      "sd_fwid": "0x00b6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52833_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52833.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "Meshtastic PPR1 (Adafruit BSP)",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "require_upload_port": true,
-    "speed": 115200,
-    "protocol": "jlink",
-    "protocols": ["jlink", "nrfjprog", "stlink"]
-  },
-  "url": "https://meshtastic.org/",
-  "vendor": "Othernet"
-}

boards/seeed-sensecap-indicator.json

@@ -0,0 +1,42 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_8MB.csv",
+      "memory_type": "qio_opi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=0",
+      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x1A86", "0x7523"]],
+    "mcu": "esp32s3",
+    "variant": "esp32s3r8"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino"],
+  "name": "Seeed Studio SenseCAP Indicator",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "require_upload_port": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.seeedstudio.com/Indicator-for-Meshtastic.html",
+  "vendor": "Seeed Studio"
+}

boards/seeed-xiao-s3.json

@@ -0,0 +1,41 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=0"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x2886", "0x0059"]],
+    "mcu": "esp32s3",
+    "variant": "seeed-xiao-s3"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "seeed-xiao-s3",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 8388608,
+    "maximum_size": 8388608,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.seeedstudio.com/XIAO-ESP32S3-Sense-p-5639.html",
+  "vendor": "Seeed Studio"
+}

boards/unphone.json

@@ -0,0 +1,46 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi",
+      "partitions": "default_8MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DUNPHONE_SPIN=9",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [
+      ["0x16D0", "0x1178"],
+      ["0x303a", "0x1001"]
+    ],
+    "mcu": "esp32s3",
+    "variant": "unphone"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "unPhone",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8323072,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://unphone.net/",
+  "vendor": "University of Sheffield"
+}

boards/wiscore_rak11720.json

@@ -0,0 +1,45 @@
+{
+  "build": {
+    "cpu": "cortex-m4",
+    "f_cpu": "48000000L",
+    "mcu": "AMA3B1KK",
+    "part": "apollo3",
+    "fabi": "hard",
+    "specs": "nosys.specs",
+    "framework": {
+      "arduino": {
+        "v1": {
+          "variant": "artemis",
+          "extra_flags": "-DSFE_ARTEMIS"
+        },
+        "v2": {
+          "variant": "rak11720",
+          "extra_flags": "-DARDUINO_RAK_11720_MODULE"
+        }
+      },
+      "ambiqsdk-sfe": {
+        "variant": ["boards_sfe", "artemis_module"],
+        "extra_flags": "",
+        "variant_lib_src_filter": ""
+      }
+    }
+  },
+  "debug": {
+    "jlink_device": "AMA3B1KK-KBR",
+    "svd_path": "apollo3.svd",
+    "swo_freq": 12000000,
+    "init": {
+      "break": "tbreak setup"
+    }
+  },
+  "frameworks": ["arduino", "ambiqsdk-sfe"],
+  "name": "WisCore RAK11720 Board",
+  "upload": {
+    "maximum_ram_size": 393216,
+    "maximum_size": 983040,
+    "protocol": "svl",
+    "protocols": ["svl", "asb", "jlink"]
+  },
+  "url": "https://www.rakwireless.com",
+  "vendor": "RAKwireless"
+}

images/face-24px.svg

@@ -1 +1 @@
-<svg xmlns="http://www.w3.org/2000/svg" height="24" viewBox="0 0 24 24" width="24"><path d="M9 11.75c-.69 0-1.25.56-1.25 1.25s.56 1.25 1.25 1.25 1.25-.56 1.25-1.25-.56-1.25-1.25-1.25zm6 0c-.69 0-1.25.56-1.25 1.25s.56 1.25 1.25 1.25 1.25-.56 1.25-1.25-.56-1.25-1.25-1.25zM12 2C6.48 2 2 6.48 2 12s4.48 10 10 10 10-4.48 10-10S17.52 2 12 2zm0 18c-4.41 0-8-3.59-8-8 0-.29.02-.58.05-.86 2.36-1.05 4.23-2.98 5.21-5.37C11.07 8.33 14.05 10 17.42 10c.78 0 1.53-.09 2.25-.26.21.71.33 1.47.33 2.26 0 4.41-3.59 8-8 8z"/><path d="M0 0h24v24H0z" fill="none"/></svg>
+<svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 0 24 24"><path d="M9 11.75a1.25 1.25 0 1 0 0 2.5 1.25 1.25 0 0 0 0-2.5m6 0a1.25 1.25 0 1 0 0 2.5 1.25 1.25 0 0 0 0-2.5M12 2C6.48 2 2 6.48 2 12s4.48 10 10 10 10-4.48 10-10S17.52 2 12 2m0 18c-4.41 0-8-3.59-8-8 0-.29.02-.58.05-.86 2.36-1.05 4.23-2.98 5.21-5.37a9.97 9.97 0 0 0 10.41 3.97c.21.71.33 1.47.33 2.26 0 4.41-3.59 8-8 8"/><path fill="none" d="M0 0h24v24H0z"/></svg>

images/location_searching-24px.svg

@@ -1 +1 @@
-<svg xmlns="http://www.w3.org/2000/svg" height="24" viewBox="0 0 24 24" width="24"><path d="M0 0h24v24H0z" fill="none"/><path d="M20.94 11c-.46-4.17-3.77-7.48-7.94-7.94V1h-2v2.06C6.83 3.52 3.52 6.83 3.06 11H1v2h2.06c.46 4.17 3.77 7.48 7.94 7.94V23h2v-2.06c4.17-.46 7.48-3.77 7.94-7.94H23v-2h-2.06zM12 19c-3.87 0-7-3.13-7-7s3.13-7 7-7 7 3.13 7 7-3.13 7-7 7z"/></svg>
+<svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 0 24 24"><path fill="none" d="M0 0h24v24H0z"/><path d="M20.94 11A8.994 8.994 0 0 0 13 3.06V1h-2v2.06A8.994 8.994 0 0 0 3.06 11H1v2h2.06A8.994 8.994 0 0 0 11 20.94V23h2v-2.06A8.994 8.994 0 0 0 20.94 13H23v-2zM12 19c-3.87 0-7-3.13-7-7s3.13-7 7-7 7 3.13 7 7-3.13 7-7 7"/></svg>

images/room-24px.svg

@@ -1 +1 @@
-<svg xmlns="http://www.w3.org/2000/svg" height="24" viewBox="0 0 24 24" width="24"><path d="M12 2C8.13 2 5 5.13 5 9c0 5.25 7 13 7 13s7-7.75 7-13c0-3.87-3.13-7-7-7zm0 9.5c-1.38 0-2.5-1.12-2.5-2.5s1.12-2.5 2.5-2.5 2.5 1.12 2.5 2.5-1.12 2.5-2.5 2.5z"/><path d="M0 0h24v24H0z" fill="none"/></svg>
+<svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 0 24 24"><path d="M12 2C8.13 2 5 5.13 5 9c0 5.25 7 13 7 13s7-7.75 7-13c0-3.87-3.13-7-7-7m0 9.5a2.5 2.5 0 0 1 0-5 2.5 2.5 0 0 1 0 5"/><path fill="none" d="M0 0h24v24H0z"/></svg>

images/textsms-24px.svg

@@ -1 +1 @@
-<svg xmlns="http://www.w3.org/2000/svg" height="24" viewBox="0 0 24 24" width="24"><path d="M20 2H4c-1.1 0-1.99.9-1.99 2L2 22l4-4h14c1.1 0 2-.9 2-2V4c0-1.1-.9-2-2-2zM9 11H7V9h2v2zm4 0h-2V9h2v2zm4 0h-2V9h2v2z"/><path d="M0 0h24v24H0z" fill="none"/></svg>
+<svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 0 24 24"><path d="M20 2H4c-1.1 0-1.99.9-1.99 2L2 22l4-4h14c1.1 0 2-.9 2-2V4c0-1.1-.9-2-2-2M9 11H7V9h2zm4 0h-2V9h2zm4 0h-2V9h2z"/><path fill="none" d="M0 0h24v24H0z"/></svg>

platformio.ini

@@ -17,11 +17,9 @@ default_envs = tbeam
 ;default_envs = tlora-v2-1-1_6
 ;default_envs = tlora-v2-1-1_6-tcxo
 ;default_envs = tlora-t3s3-v1
-;default_envs = lora-relay-v1 # nrf board
 ;default_envs = t-echo
 ;default_envs = canaryone
-;default_envs = nrf52840dk-geeksville
+;default_envs = native
-;default_envs = native # lora-relay-v1 # nrf52840dk-geeksville # linux # or if you'd like to change the default to something like lora-relay-v1 put that here
 ;default_envs = nano-g1
 ;default_envs = pca10059_diy_eink
 ;default_envs = meshtastic-diy-v1
@@ -29,8 +27,9 @@ default_envs = tbeam
 ;default_envs = meshtastic-dr-dev
 ;default_envs = m5stack-coreink
 ;default_envs = rak4631
+;default_envs = rak4631_eth_gw
 ;default_envs = rak2560
-;default_envs = rak10701
+;default_envs = rak_wismeshtap
 ;default_envs = wio-e5
 ;default_envs = radiomaster_900_bandit_nano
 ;default_envs = radiomaster_900_bandit_micro
@@ -40,124 +39,126 @@ default_envs = tbeam
 ;default_envs = heltec_vision_master_e213
 ;default_envs = heltec_vision_master_e290
 ;default_envs = heltec_mesh_node_t114
-
 extra_configs =
-  arch/*/*.ini
+	arch/*/*.ini
-  variants/*/platformio.ini
+	variants/*/platformio.ini
+description = Meshtastic
 
 [env]
 test_build_src = true
 extra_scripts = bin/platformio-custom.py
-
 ; note: we add src to our include search path so that lmic_project_config can override
 ; note: TINYGPS_OPTION_NO_CUSTOM_FIELDS is VERY important.  We don't use custom fields and somewhere in that pile
 ; of code is a heap corruption bug!
 ; FIXME: fix lib/BluetoothOTA dependency back on src/ so we can remove -Isrc
 ; The Radiolib stuff will speed up building considerably. Exclud all the stuff we dont need.
 build_flags = -Wno-missing-field-initializers
-  -Wno-format
+
-  -Isrc -Isrc/mesh -Isrc/mesh/generated -Isrc/gps -Isrc/buzz -Wl,-Map,.pio/build/output.map
+	-Wno-format
-  -DUSE_THREAD_NAMES
+	-Isrc -Isrc/mesh -Isrc/mesh/generated -Isrc/gps -Isrc/buzz -Wl,-Map,.pio/build/output.map
-  -DTINYGPS_OPTION_NO_CUSTOM_FIELDS
+	-DUSE_THREAD_NAMES
-  -DPB_ENABLE_MALLOC=1
+	-DTINYGPS_OPTION_NO_CUSTOM_FIELDS
-  -DRADIOLIB_EXCLUDE_CC1101
+	-DPB_ENABLE_MALLOC=1
-  -DRADIOLIB_EXCLUDE_NRF24
+	-DRADIOLIB_EXCLUDE_CC1101=1
-  -DRADIOLIB_EXCLUDE_RF69
+	-DRADIOLIB_EXCLUDE_NRF24=1
-  -DRADIOLIB_EXCLUDE_SX1231
+	-DRADIOLIB_EXCLUDE_RF69=1
-  -DRADIOLIB_EXCLUDE_SX1233
+	-DRADIOLIB_EXCLUDE_SX1231=1
-  -DRADIOLIB_EXCLUDE_SI443X
+	-DRADIOLIB_EXCLUDE_SX1233=1
-  -DRADIOLIB_EXCLUDE_RFM2X
+	-DRADIOLIB_EXCLUDE_SI443X=1
-  -DRADIOLIB_EXCLUDE_AFSK
+	-DRADIOLIB_EXCLUDE_RFM2X=1
-  -DRADIOLIB_EXCLUDE_BELL
+	-DRADIOLIB_EXCLUDE_AFSK=1
-  -DRADIOLIB_EXCLUDE_HELLSCHREIBER
+	-DRADIOLIB_EXCLUDE_BELL=1
-  -DRADIOLIB_EXCLUDE_MORSE
+	-DRADIOLIB_EXCLUDE_HELLSCHREIBER=1
-  -DRADIOLIB_EXCLUDE_RTTY
+	-DRADIOLIB_EXCLUDE_MORSE=1
-  -DRADIOLIB_EXCLUDE_SSTV
+	-DRADIOLIB_EXCLUDE_RTTY=1
-  -DRADIOLIB_EXCLUDE_AX25
+	-DRADIOLIB_EXCLUDE_SSTV=1
-  -DRADIOLIB_EXCLUDE_DIRECT_RECEIVE
+	-DRADIOLIB_EXCLUDE_AX25=1
-  -DRADIOLIB_EXCLUDE_BELL
+	-DRADIOLIB_EXCLUDE_DIRECT_RECEIVE=1
-  -DRADIOLIB_EXCLUDE_PAGER
+	-DRADIOLIB_EXCLUDE_BELL=1
-  -DRADIOLIB_EXCLUDE_FSK4
+	-DRADIOLIB_EXCLUDE_PAGER=1
-  -DRADIOLIB_EXCLUDE_APRS
+	-DRADIOLIB_EXCLUDE_FSK4=1
-  -DRADIOLIB_EXCLUDE_LORAWAN
+	-DRADIOLIB_EXCLUDE_APRS=1
-  -DMESHTASTIC_EXCLUDE_DROPZONE=1
+	-DRADIOLIB_EXCLUDE_LORAWAN=1
-  ;-D OLED_PL
+	-DMESHTASTIC_EXCLUDE_DROPZONE=1
+	-DMESHTASTIC_EXCLUDE_REMOTEHARDWARE=1
+  -DMESHTASTIC_EXCLUDE_POWERSTRESS=1 ; exclude power stress test module from main firmware
+        #-DBUILD_EPOCH=$UNIX_TIME
+        ;-D OLED_PL
 
 monitor_speed = 115200
 monitor_filters = direct
-
 lib_deps =
-;  jgromes/RadioLib@~6.6.0
+	https://github.com/meshtastic/esp8266-oled-ssd1306.git#e16cee124fe26490cb14880c679321ad8ac89c95
-  https://github.com/jgromes/RadioLib.git#3115fc2d6700a9aee05888791ac930a910f2628f
+	mathertel/OneButton@2.6.1
-  https://github.com/meshtastic/esp8266-oled-ssd1306.git#e16cee124fe26490cb14880c679321ad8ac89c95 ; ESP8266_SSD1306
+	https://github.com/meshtastic/arduino-fsm.git#7db3702bf0cfe97b783d6c72595e3f38e0b19159
-  https://github.com/mathertel/OneButton@~2.6.1 ; OneButton library for non-blocking button debounce
+	https://github.com/meshtastic/TinyGPSPlus.git#71a82db35f3b973440044c476d4bcdc673b104f4
-  https://github.com/meshtastic/arduino-fsm.git#7db3702bf0cfe97b783d6c72595e3f38e0b19159
+	https://github.com/meshtastic/ArduinoThread.git#1ae8778c85d0a2a729f989e0b1e7d7c4dc84eef0
-  https://github.com/meshtastic/TinyGPSPlus.git#71a82db35f3b973440044c476d4bcdc673b104f4
+	nanopb/Nanopb@0.4.9
-  https://github.com/meshtastic/ArduinoThread.git#1ae8778c85d0a2a729f989e0b1e7d7c4dc84eef0
+	erriez/ErriezCRC32@1.0.1
-  nanopb/Nanopb@^0.4.8
-  erriez/ErriezCRC32@^1.0.1
 
 ; Used for the code analysis in PIO Home / Inspect
 check_tool = cppcheck
 check_skip_packages = yes
 check_flags =
-  -DAPP_VERSION=1.0.0
+	-DAPP_VERSION=1.0.0
-  --suppressions-list=suppressions.txt
+	--suppressions-list=suppressions.txt
-  --inline-suppr
+	--inline-suppr
 
 ; Common settings for conventional (non Portduino) Arduino targets
 [arduino_base]
 framework = arduino
 lib_deps =
-  ${env.lib_deps}
+	${env.lib_deps}
-  end2endzone/NonBlockingRTTTL@^1.3.0
+	end2endzone/NonBlockingRTTTL@1.3.0
-  https://github.com/meshtastic/SparkFun_ATECCX08a_Arduino_Library.git#5cf62b36c6f30bc72a07bdb2c11fc9a22d1e31da
+	https://github.com/meshtastic/SparkFun_ATECCX08a_Arduino_Library.git#5cf62b36c6f30bc72a07bdb2c11fc9a22d1e31da
-
 build_flags = ${env.build_flags} -Os
 build_src_filter = ${env.build_src_filter} -<platform/portduino/>
 
 ; Common libs for communicating over TCP/IP networks such as MQTT
 [networking_base]
 lib_deps =
-  knolleary/PubSubClient@^2.8
+	knolleary/PubSubClient@2.8
-  arduino-libraries/NTPClient@^3.1.0
+	arduino-libraries/NTPClient@3.1.0
-  arcao/Syslog@^2.0.0
+	arcao/Syslog@2.0.0
+
+[radiolib_base]
+lib_deps =
+	jgromes/RadioLib@7.1.0
 
 ; Common libs for environmental measurements in telemetry module
 ; (not included in native / portduino)
 [environmental_base]
 lib_deps =
-  adafruit/Adafruit BusIO@^1.15.0
+	adafruit/Adafruit BusIO@1.16.2
-  adafruit/Adafruit Unified Sensor@^1.1.11
+	adafruit/Adafruit Unified Sensor@1.1.14
-  adafruit/Adafruit BMP280 Library@^2.6.8
+	adafruit/Adafruit BMP280 Library@2.6.8
-  adafruit/Adafruit BMP085 Library@^1.2.4
+	adafruit/Adafruit BMP085 Library@1.2.4
-  adafruit/Adafruit BME280 Library@^2.2.2
+	adafruit/Adafruit BME280 Library@2.2.4
-  adafruit/Adafruit BMP3XX Library@^2.1.5
+	adafruit/Adafruit BMP3XX Library@2.1.5
-  adafruit/Adafruit MCP9808 Library@^2.0.0
+	adafruit/Adafruit MCP9808 Library@2.0.2
-  adafruit/Adafruit INA260 Library@^1.5.0
+	adafruit/Adafruit INA260 Library@1.5.2
-  adafruit/Adafruit INA219@^1.2.0
+	adafruit/Adafruit INA219@1.2.3
-  adafruit/Adafruit SHTC3 Library@^1.0.0
+	adafruit/Adafruit MAX1704X@1.0.3
-  adafruit/Adafruit LPS2X@^2.0.4
+	adafruit/Adafruit SHTC3 Library@1.0.1
-  adafruit/Adafruit SHT31 Library@^2.2.2
+	adafruit/Adafruit LPS2X@2.0.6
-  adafruit/Adafruit PM25 AQI Sensor@^1.0.6
+	adafruit/Adafruit SHT31 Library@2.2.2
-  adafruit/Adafruit MPU6050@^2.2.4
+	adafruit/Adafruit PM25 AQI Sensor@1.1.1
-  adafruit/Adafruit LIS3DH@^1.2.4
+	adafruit/Adafruit MPU6050@2.2.6
-  adafruit/Adafruit AHTX0@^2.0.5
+	adafruit/Adafruit LIS3DH@1.3.0
-  adafruit/Adafruit LSM6DS@^4.7.2
+	adafruit/Adafruit AHTX0@2.0.5
-  adafruit/Adafruit VEML7700 Library@^2.1.6
+	adafruit/Adafruit LSM6DS@4.7.3
-  adafruit/Adafruit SHT4x Library@^1.0.4
+	adafruit/Adafruit VEML7700 Library@2.1.6
-  adafruit/Adafruit TSL2591 Library@^1.4.5
+	adafruit/Adafruit SHT4x Library@1.0.5
-  sparkfun/SparkFun Qwiic Scale NAU7802 Arduino Library@^1.0.5
+	adafruit/Adafruit TSL2591 Library@1.4.5
-  ClosedCube OPT3001@^1.1.2
+	sparkfun/SparkFun Qwiic Scale NAU7802 Arduino Library@1.0.6
-  emotibit/EmotiBit MLX90632@^1.0.8
+	sparkfun/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library@1.2.13
-  dfrobot/DFRobot_RTU@^1.0.3
+	ClosedCube OPT3001@1.1.2
-
+	emotibit/EmotiBit MLX90632@1.0.8
-
+	sparkfun/SparkFun MAX3010x Pulse and Proximity Sensor Library@1.1.2
-  https://github.com/boschsensortec/Bosch-BSEC2-Library#v1.7.2502
+	adafruit/Adafruit MLX90614 Library@2.1.5
-  boschsensortec/BME68x Sensor Library@^1.1.40407
+	https://github.com/boschsensortec/Bosch-BSEC2-Library#v1.7.2502
-  https://github.com/KodinLanewave/INA3221@^1.0.0
+	boschsensortec/BME68x Sensor Library@1.1.40407
-  lewisxhe/SensorLib@^0.2.0
+	https://github.com/KodinLanewave/INA3221@1.0.1
-  mprograms/QMC5883LCompass@^1.2.0
+	mprograms/QMC5883LCompass@1.2.3
-  
+	dfrobot/DFRobot_RTU@1.0.3
-
+	https://github.com/meshtastic/DFRobot_LarkWeatherStation#4de3a9cadef0f6a5220a8a906cf9775b02b0040d
-  https://github.com/meshtastic/DFRobot_LarkWeatherStation#dee914270dc7cb3e43fbf034edd85a63a16a12ee

release/latest/.gitignore

@@ -1 +0,0 @@
-curfirmwareversion.xml

src/AccelerometerThread.h

@@ -1,297 +0,0 @@
-#pragma once
-#include "configuration.h"
-
-#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
-
-#include "PowerFSM.h"
-#include "concurrency/OSThread.h"
-#include "main.h"
-#include "power.h"
-
-#include <Adafruit_LIS3DH.h>
-#include <Adafruit_LSM6DS3TRC.h>
-#include <Adafruit_MPU6050.h>
-#include <Arduino.h>
-#include <SensorBMA423.hpp>
-#include <Wire.h>
-#ifdef RAK_4631
-#include "Fusion/Fusion.h"
-#include "graphics/Screen.h"
-#include "graphics/ScreenFonts.h"
-#include <Rak_BMX160.h>
-#endif
-
-#define ACCELEROMETER_CHECK_INTERVAL_MS 100
-#define ACCELEROMETER_CLICK_THRESHOLD 40
-
-static inline int readRegister(uint8_t address, uint8_t reg, uint8_t *data, uint8_t len)
-{
-    Wire.beginTransmission(address);
-    Wire.write(reg);
-    Wire.endTransmission();
-    Wire.requestFrom((uint8_t)address, (uint8_t)len);
-    uint8_t i = 0;
-    while (Wire.available()) {
-        data[i++] = Wire.read();
-    }
-    return 0; // Pass
-}
-
-static inline int writeRegister(uint8_t address, uint8_t reg, uint8_t *data, uint8_t len)
-{
-    Wire.beginTransmission(address);
-    Wire.write(reg);
-    Wire.write(data, len);
-    return (0 != Wire.endTransmission());
-}
-
-class AccelerometerThread : public concurrency::OSThread
-{
-  public:
-    explicit AccelerometerThread(ScanI2C::DeviceType type) : OSThread("AccelerometerThread")
-    {
-        if (accelerometer_found.port == ScanI2C::I2CPort::NO_I2C) {
-            LOG_DEBUG("AccelerometerThread disabling due to no sensors found\n");
-            disable();
-            return;
-        }
-        acceleremoter_type = type;
-#ifndef RAK_4631
-        if (!config.display.wake_on_tap_or_motion && !config.device.double_tap_as_button_press) {
-            LOG_DEBUG("AccelerometerThread disabling due to no interested configurations\n");
-            disable();
-            return;
-        }
-#endif
-        init();
-    }
-
-    void start()
-    {
-        init();
-        setIntervalFromNow(0);
-    };
-
-  protected:
-    int32_t runOnce() override
-    {
-        canSleep = true; // Assume we should not keep the board awake
-
-        if (acceleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.getMotionInterruptStatus()) {
-            wakeScreen();
-        } else if (acceleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.getClick() > 0) {
-            uint8_t click = lis.getClick();
-            if (!config.device.double_tap_as_button_press) {
-                wakeScreen();
-            }
-
-            if (config.device.double_tap_as_button_press && (click & 0x20)) {
-                buttonPress();
-                return 500;
-            }
-        } else if (acceleremoter_type == ScanI2C::DeviceType::BMA423 && bmaSensor.readIrqStatus() != DEV_WIRE_NONE) {
-            if (bmaSensor.isTilt() || bmaSensor.isDoubleTap()) {
-                wakeScreen();
-                return 500;
-            }
-#ifdef RAK_4631
-        } else if (acceleremoter_type == ScanI2C::DeviceType::BMX160) {
-            sBmx160SensorData_t magAccel;
-            sBmx160SensorData_t gAccel;
-
-            /* Get a new sensor event */
-            bmx160.getAllData(&magAccel, NULL, &gAccel);
-
-            // expirimental calibrate routine. Limited to between 10 and 30 seconds after boot
-            if (millis() > 12 * 1000 && millis() < 30 * 1000) {
-                if (!showingScreen) {
-                    showingScreen = true;
-                    screen->startAlert((FrameCallback)drawFrameCalibration);
-                }
-                if (magAccel.x > highestX)
-                    highestX = magAccel.x;
-                if (magAccel.x < lowestX)
-                    lowestX = magAccel.x;
-                if (magAccel.y > highestY)
-                    highestY = magAccel.y;
-                if (magAccel.y < lowestY)
-                    lowestY = magAccel.y;
-                if (magAccel.z > highestZ)
-                    highestZ = magAccel.z;
-                if (magAccel.z < lowestZ)
-                    lowestZ = magAccel.z;
-            } else if (showingScreen && millis() >= 30 * 1000) {
-                showingScreen = false;
-                screen->endAlert();
-            }
-
-            int highestRealX = highestX - (highestX + lowestX) / 2;
-
-            magAccel.x -= (highestX + lowestX) / 2;
-            magAccel.y -= (highestY + lowestY) / 2;
-            magAccel.z -= (highestZ + lowestZ) / 2;
-            FusionVector ga, ma;
-            ga.axis.x = -gAccel.x; // default location for the BMX160 is on the rear of the board
-            ga.axis.y = -gAccel.y;
-            ga.axis.z = gAccel.z;
-            ma.axis.x = -magAccel.x;
-            ma.axis.y = -magAccel.y;
-            ma.axis.z = magAccel.z * 3;
-
-            // If we're set to one of the inverted positions
-            if (config.display.compass_orientation > meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_270) {
-                ma = FusionAxesSwap(ma, FusionAxesAlignmentNXNYPZ);
-                ga = FusionAxesSwap(ga, FusionAxesAlignmentNXNYPZ);
-            }
-
-            float heading = FusionCompassCalculateHeading(FusionConventionNed, ga, ma);
-
-            switch (config.display.compass_orientation) {
-            case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_0_INVERTED:
-            case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_0:
-                break;
-            case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_90:
-            case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_90_INVERTED:
-                heading += 90;
-                break;
-            case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_180:
-            case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_180_INVERTED:
-                heading += 180;
-                break;
-            case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_270:
-            case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_270_INVERTED:
-                heading += 270;
-                break;
-            }
-
-            screen->setHeading(heading);
-
-#endif
-        } else if (acceleremoter_type == ScanI2C::DeviceType::LSM6DS3 && lsm.shake()) {
-            wakeScreen();
-            return 500;
-        }
-
-        return ACCELEROMETER_CHECK_INTERVAL_MS;
-    }
-
-  private:
-    void init()
-    {
-        LOG_DEBUG("AccelerometerThread initializing\n");
-
-        if (acceleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.begin(accelerometer_found.address)) {
-            LOG_DEBUG("MPU6050 initializing\n");
-            // setup motion detection
-            mpu.setHighPassFilter(MPU6050_HIGHPASS_0_63_HZ);
-            mpu.setMotionDetectionThreshold(1);
-            mpu.setMotionDetectionDuration(20);
-            mpu.setInterruptPinLatch(true); // Keep it latched.  Will turn off when reinitialized.
-            mpu.setInterruptPinPolarity(true);
-        } else if (acceleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.begin(accelerometer_found.address)) {
-            LOG_DEBUG("LIS3DH initializing\n");
-            lis.setRange(LIS3DH_RANGE_2_G);
-            // Adjust threshold, higher numbers are less sensitive
-            lis.setClick(config.device.double_tap_as_button_press ? 2 : 1, ACCELEROMETER_CLICK_THRESHOLD);
-        } else if (acceleremoter_type == ScanI2C::DeviceType::BMA423 &&
-                   bmaSensor.begin(accelerometer_found.address, &readRegister, &writeRegister)) {
-            LOG_DEBUG("BMA423 initializing\n");
-            bmaSensor.configAccelerometer(bmaSensor.RANGE_2G, bmaSensor.ODR_100HZ, bmaSensor.BW_NORMAL_AVG4,
-                                          bmaSensor.PERF_CONTINUOUS_MODE);
-            bmaSensor.enableAccelerometer();
-            bmaSensor.configInterrupt(BMA4_LEVEL_TRIGGER, BMA4_ACTIVE_HIGH, BMA4_PUSH_PULL, BMA4_OUTPUT_ENABLE,
-                                      BMA4_INPUT_DISABLE);
-
-#ifdef BMA423_INT
-            pinMode(BMA4XX_INT, INPUT);
-            attachInterrupt(
-                BMA4XX_INT,
-                [] {
-                    // Set interrupt to set irq value to true
-                    BMA_IRQ = true;
-                },
-                RISING); // Select the interrupt mode according to the actual circuit
-#endif
-
-#ifdef T_WATCH_S3
-            // Need to raise the wrist function, need to set the correct axis
-            bmaSensor.setReampAxes(bmaSensor.REMAP_TOP_LAYER_RIGHT_CORNER);
-#else
-            bmaSensor.setReampAxes(bmaSensor.REMAP_BOTTOM_LAYER_BOTTOM_LEFT_CORNER);
-#endif
-            // bmaSensor.enableFeature(bmaSensor.FEATURE_STEP_CNTR, true);
-            bmaSensor.enableFeature(bmaSensor.FEATURE_TILT, true);
-            bmaSensor.enableFeature(bmaSensor.FEATURE_WAKEUP, true);
-            // bmaSensor.resetPedometer();
-
-            // Turn on feature interrupt
-            bmaSensor.enablePedometerIRQ();
-            bmaSensor.enableTiltIRQ();
-            // It corresponds to isDoubleClick interrupt
-            bmaSensor.enableWakeupIRQ();
-#ifdef RAK_4631
-        } else if (acceleremoter_type == ScanI2C::DeviceType::BMX160 && bmx160.begin()) {
-            bmx160.ODR_Config(BMX160_ACCEL_ODR_100HZ, BMX160_GYRO_ODR_100HZ); // set output data rate
-
-#endif
-        } else if (acceleremoter_type == ScanI2C::DeviceType::LSM6DS3 && lsm.begin_I2C(accelerometer_found.address)) {
-            LOG_DEBUG("LSM6DS3 initializing\n");
-            // Default threshold of 2G, less sensitive options are 4, 8 or 16G
-            lsm.setAccelRange(LSM6DS_ACCEL_RANGE_2_G);
-#ifndef LSM6DS3_WAKE_THRESH
-#define LSM6DS3_WAKE_THRESH 20
-#endif
-            lsm.enableWakeup(config.display.wake_on_tap_or_motion, 1, LSM6DS3_WAKE_THRESH);
-            // Duration is number of occurances needed to trigger, higher threshold is less sensitive
-        }
-    }
-    void wakeScreen()
-    {
-        if (powerFSM.getState() == &stateDARK) {
-            LOG_INFO("Tap or motion detected. Turning on screen\n");
-            powerFSM.trigger(EVENT_INPUT);
-        }
-    }
-
-    void buttonPress()
-    {
-        LOG_DEBUG("Double-tap detected. Firing button press\n");
-        powerFSM.trigger(EVENT_PRESS);
-    }
-
-    ScanI2C::DeviceType acceleremoter_type;
-    Adafruit_MPU6050 mpu;
-    Adafruit_LIS3DH lis;
-    Adafruit_LSM6DS3TRC lsm;
-    SensorBMA423 bmaSensor;
-    bool BMA_IRQ = false;
-#ifdef RAK_4631
-    bool showingScreen = false;
-    RAK_BMX160 bmx160;
-    float highestX = 0, lowestX = 0, highestY = 0, lowestY = 0, highestZ = 0, lowestZ = 0;
-
-    static void drawFrameCalibration(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
-    {
-        int x_offset = display->width() / 2;
-        int y_offset = display->height() <= 80 ? 0 : 32;
-        display->setTextAlignment(TEXT_ALIGN_LEFT);
-        display->setFont(FONT_MEDIUM);
-        display->drawString(x, y, "Calibrating\nCompass");
-        int16_t compassX = 0, compassY = 0;
-        uint16_t compassDiam = graphics::Screen::getCompassDiam(display->getWidth(), display->getHeight());
-
-        // coordinates for the center of the compass/circle
-        if (config.display.displaymode == meshtastic_Config_DisplayConfig_DisplayMode_DEFAULT) {
-            compassX = x + display->getWidth() - compassDiam / 2 - 5;
-            compassY = y + display->getHeight() / 2;
-        } else {
-            compassX = x + display->getWidth() - compassDiam / 2 - 5;
-            compassY = y + FONT_HEIGHT_SMALL + (display->getHeight() - FONT_HEIGHT_SMALL) / 2;
-        }
-        display->drawCircle(compassX, compassY, compassDiam / 2);
-        screen->drawCompassNorth(display, compassX, compassY, screen->getHeading() * PI / 180);
-    }
-#endif
-};
-
-#endif

src/AmbientLightingThread.h

@@ -21,7 +21,7 @@ namespace concurrency
 class AmbientLightingThread : public concurrency::OSThread
 {
   public:
-    explicit AmbientLightingThread(ScanI2C::DeviceType type) : OSThread("AmbientLightingThread")
+    explicit AmbientLightingThread(ScanI2C::DeviceType type) : OSThread("AmbientLighting")
     {
         notifyDeepSleepObserver.observe(&notifyDeepSleep); // Let us know when shutdown() is issued.
 
@@ -42,18 +42,18 @@ class AmbientLightingThread : public concurrency::OSThread
 #ifdef HAS_NCP5623
         _type = type;
         if (_type == ScanI2C::DeviceType::NONE) {
-            LOG_DEBUG("AmbientLightingThread disabling due to no RGB leds found on I2C bus\n");
+            LOG_DEBUG("AmbientLighting Disable due to no RGB leds found on I2C bus");
             disable();
             return;
         }
 #endif
 #if defined(HAS_NCP5623) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
         if (!moduleConfig.ambient_lighting.led_state) {
-            LOG_DEBUG("AmbientLightingThread disabling due to moduleConfig.ambient_lighting.led_state OFF\n");
+            LOG_DEBUG("AmbientLighting Disable due to moduleConfig.ambient_lighting.led_state OFF");
             disable();
             return;
         }
-        LOG_DEBUG("AmbientLightingThread initializing\n");
+        LOG_DEBUG("AmbientLighting init");
 #ifdef HAS_NCP5623
         if (_type == ScanI2C::NCP5623) {
             rgb.begin();
@@ -106,27 +106,27 @@ class AmbientLightingThread : public concurrency::OSThread
         rgb.setRed(0);
         rgb.setGreen(0);
         rgb.setBlue(0);
-        LOG_INFO("Turn Off NCP5623 Ambient lighting.\n");
+        LOG_INFO("OFF: NCP5623 Ambient lighting");
 #endif
 #ifdef HAS_NEOPIXEL
         pixels.clear();
         pixels.show();
-        LOG_INFO("Turn Off NeoPixel Ambient lighting.\n");
+        LOG_INFO("OFF: NeoPixel Ambient lighting");
 #endif
 #ifdef RGBLED_CA
         analogWrite(RGBLED_RED, 255 - 0);
         analogWrite(RGBLED_GREEN, 255 - 0);
         analogWrite(RGBLED_BLUE, 255 - 0);
-        LOG_INFO("Turn Off Ambient lighting RGB Common Anode.\n");
+        LOG_INFO("OFF: Ambient light RGB Common Anode");
 #elif defined(RGBLED_RED)
         analogWrite(RGBLED_RED, 0);
         analogWrite(RGBLED_GREEN, 0);
         analogWrite(RGBLED_BLUE, 0);
-        LOG_INFO("Turn Off Ambient lighting RGB Common Cathode.\n");
+        LOG_INFO("OFF: Ambient light RGB Common Cathode");
 #endif
 #ifdef UNPHONE
         unphone.rgb(0, 0, 0);
-        LOG_INFO("Turn Off unPhone Ambient lighting.\n");
+        LOG_INFO("OFF: unPhone Ambient lighting");
 #endif
         return 0;
     }
@@ -138,9 +138,8 @@ class AmbientLightingThread : public concurrency::OSThread
         rgb.setRed(moduleConfig.ambient_lighting.red);
         rgb.setGreen(moduleConfig.ambient_lighting.green);
         rgb.setBlue(moduleConfig.ambient_lighting.blue);
-        LOG_DEBUG("Initializing NCP5623 Ambient lighting w/ current=%d, red=%d, green=%d, blue=%d\n",
+        LOG_DEBUG("Init NCP5623 Ambient light w/ current=%d, red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.current,
-                  moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
+                  moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
-                  moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef HAS_NEOPIXEL
         pixels.fill(pixels.Color(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
@@ -158,7 +157,7 @@ class AmbientLightingThread : public concurrency::OSThread
 #endif
 #endif
         pixels.show();
-        LOG_DEBUG("Initializing NeoPixel Ambient lighting w/ brightness(current)=%d, red=%d, green=%d, blue=%d\n",
+        LOG_DEBUG("Init NeoPixel Ambient light w/ brightness(current)=%d, red=%d, green=%d, blue=%d",
                   moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
                   moduleConfig.ambient_lighting.blue);
 #endif
@@ -166,21 +165,21 @@ class AmbientLightingThread : public concurrency::OSThread
         analogWrite(RGBLED_RED, 255 - moduleConfig.ambient_lighting.red);
         analogWrite(RGBLED_GREEN, 255 - moduleConfig.ambient_lighting.green);
         analogWrite(RGBLED_BLUE, 255 - moduleConfig.ambient_lighting.blue);
-        LOG_DEBUG("Initializing Ambient lighting RGB Common Anode w/ red=%d, green=%d, blue=%d\n",
+        LOG_DEBUG("Init Ambient light RGB Common Anode w/ red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.red,
-                  moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+                  moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #elif defined(RGBLED_RED)
         analogWrite(RGBLED_RED, moduleConfig.ambient_lighting.red);
         analogWrite(RGBLED_GREEN, moduleConfig.ambient_lighting.green);
         analogWrite(RGBLED_BLUE, moduleConfig.ambient_lighting.blue);
-        LOG_DEBUG("Initializing Ambient lighting RGB Common Cathode w/ red=%d, green=%d, blue=%d\n",
+        LOG_DEBUG("Init Ambient light RGB Common Cathode w/ red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.red,
-                  moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+                  moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef UNPHONE
         unphone.rgb(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
-        LOG_DEBUG("Initializing unPhone Ambient lighting w/ red=%d, green=%d, blue=%d\n", moduleConfig.ambient_lighting.red,
+        LOG_DEBUG("Init unPhone Ambient light w/ red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.red,
                   moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
     }
 };
 
-} // namespace concurrency
+} // namespace concurrency

src/AudioThread.h

@@ -16,7 +16,7 @@
 class AudioThread : public concurrency::OSThread
 {
   public:
-    AudioThread() : OSThread("AudioThread") { initOutput(); }
+    AudioThread() : OSThread("Audio") { initOutput(); }
 
     void beginRttl(const void *data, uint32_t len)
     {
@@ -64,7 +64,7 @@ class AudioThread : public concurrency::OSThread
     void initOutput()
     {
         audioOut = new AudioOutputI2S(1, AudioOutputI2S::EXTERNAL_I2S);
-        audioOut->SetPinout(DAC_I2S_BCK, DAC_I2S_WS, DAC_I2S_DOUT);
+        audioOut->SetPinout(DAC_I2S_BCK, DAC_I2S_WS, DAC_I2S_DOUT, DAC_I2S_MCLK);
         audioOut->SetGain(0.2);
     };
 

src/ButtonThread.cpp

@@ -1,4 +1,5 @@
 #include "ButtonThread.h"
+#include "../userPrefs.h"
 #include "configuration.h"
 #if !MESHTASTIC_EXCLUDE_GPS
 #include "GPS.h"
@@ -26,20 +27,25 @@ using namespace concurrency;
 ButtonThread *buttonThread; // Declared extern in header
 volatile ButtonThread::ButtonEventType ButtonThread::btnEvent = ButtonThread::BUTTON_EVENT_NONE;
 
-#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO) || defined(USERPREFS_BUTTON_PIN)
 OneButton ButtonThread::userButton; // Get reference to static member
 #endif
 ButtonThread::ButtonThread() : OSThread("Button")
 {
-#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO) || defined(USERPREFS_BUTTON_PIN)
 
 #if defined(ARCH_PORTDUINO)
     if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) {
         this->userButton = OneButton(settingsMap[user], true, true);
-        LOG_DEBUG("Using GPIO%02d for button\n", settingsMap[user]);
+        LOG_DEBUG("Use GPIO%02d for button", settingsMap[user]);
     }
 #elif defined(BUTTON_PIN)
-    int pin = config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN; // Resolved button pin
+#if !defined(USERPREFS_BUTTON_PIN)
+    int pin = config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN;           // Resolved button pin
+#endif
+#ifdef USERPREFS_BUTTON_PIN
+    int pin = config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN; // Resolved button pin
+#endif
 #if defined(HELTEC_CAPSULE_SENSOR_V3)
     this->userButton = OneButton(pin, false, false);
 #elif defined(BUTTON_ACTIVE_LOW)
@@ -47,7 +53,7 @@ ButtonThread::ButtonThread() : OSThread("Button")
 #else
     this->userButton = OneButton(pin, true, true);
 #endif
-    LOG_DEBUG("Using GPIO%02d for button\n", pin);
+    LOG_DEBUG("Use GPIO%02d for button", pin);
 #endif
 
 #ifdef INPUT_PULLUP_SENSE
@@ -59,7 +65,7 @@ ButtonThread::ButtonThread() : OSThread("Button")
 #endif
 #endif
 
-#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO) || defined(USERPREFS_BUTTON_PIN)
     userButton.attachClick(userButtonPressed);
     userButton.setClickMs(BUTTON_CLICK_MS);
     userButton.setPressMs(BUTTON_LONGPRESS_MS);
@@ -102,7 +108,7 @@ int32_t ButtonThread::runOnce()
     // If the button is pressed we suppress CPU sleep until release
     canSleep = true; // Assume we should not keep the board awake
 
-#if defined(BUTTON_PIN)
+#if defined(BUTTON_PIN) || defined(USERPREFS_BUTTON_PIN)
     userButton.tick();
     canSleep &= userButton.isIdle();
 #elif defined(ARCH_PORTDUINO)
@@ -123,9 +129,19 @@ int32_t ButtonThread::runOnce()
     if (btnEvent != BUTTON_EVENT_NONE) {
         switch (btnEvent) {
         case BUTTON_EVENT_PRESSED: {
-            LOG_BUTTON("press!\n");
+            LOG_BUTTON("press!");
+            // If a nag notification is running, stop it and prevent other actions
+            if (moduleConfig.external_notification.enabled && (externalNotificationModule->nagCycleCutoff != UINT32_MAX)) {
+                externalNotificationModule->stopNow();
+                return 50;
+            }
 #ifdef BUTTON_PIN
+#if !defined(USERPREFS_BUTTON_PIN)
             if (((config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN) !=
+#endif
+#if defined(USERPREFS_BUTTON_PIN)
+            if (((config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN) !=
+#endif
                  moduleConfig.canned_message.inputbroker_pin_press) ||
                 !(moduleConfig.canned_message.updown1_enabled || moduleConfig.canned_message.rotary1_enabled) ||
                 !moduleConfig.canned_message.enabled) {
@@ -143,7 +159,7 @@ int32_t ButtonThread::runOnce()
         }
 
         case BUTTON_EVENT_DOUBLE_PRESSED: {
-            LOG_BUTTON("Double press!\n");
+            LOG_BUTTON("Double press!");
             service->refreshLocalMeshNode();
             auto sentPosition = service->trySendPosition(NODENUM_BROADCAST, true);
             if (screen) {
@@ -157,7 +173,7 @@ int32_t ButtonThread::runOnce()
         }
 
         case BUTTON_EVENT_MULTI_PRESSED: {
-            LOG_BUTTON("Mulitipress! %hux\n", multipressClickCount);
+            LOG_BUTTON("Mulitipress! %hux", multipressClickCount);
             switch (multipressClickCount) {
 #if HAS_GPS
             // 3 clicks: toggle GPS
@@ -184,7 +200,7 @@ int32_t ButtonThread::runOnce()
         } // end multipress event
 
         case BUTTON_EVENT_LONG_PRESSED: {
-            LOG_BUTTON("Long press!\n");
+            LOG_BUTTON("Long press!");
             powerFSM.trigger(EVENT_PRESS);
             if (screen) {
                 screen->startAlert("Shutting down...");
@@ -196,7 +212,7 @@ int32_t ButtonThread::runOnce()
         // Do actual shutdown when button released, otherwise the button release
         // may wake the board immediatedly.
         case BUTTON_EVENT_LONG_RELEASED: {
-            LOG_INFO("Shutdown from long press\n");
+            LOG_INFO("Shutdown from long press");
             playShutdownMelody();
             delay(3000);
             power->shutdown();
@@ -205,7 +221,7 @@ int32_t ButtonThread::runOnce()
 
 #ifdef BUTTON_PIN_TOUCH
         case BUTTON_EVENT_TOUCH_LONG_PRESSED: {
-            LOG_BUTTON("Touch press!\n");
+            LOG_BUTTON("Touch press!");
             if (screen) {
                 // Wake if asleep
                 if (powerFSM.getState() == &stateDARK)
@@ -239,7 +255,12 @@ void ButtonThread::attachButtonInterrupts()
 #elif defined(BUTTON_PIN)
     // Interrupt for user button, during normal use. Improves responsiveness.
     attachInterrupt(
+#if !defined(USERPREFS_BUTTON_PIN)
         config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN,
+#endif
+#if defined(USERPREFS_BUTTON_PIN)
+        config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN,
+#endif
         []() {
             ButtonThread::userButton.tick();
             runASAP = true;
@@ -268,8 +289,13 @@ void ButtonThread::detachButtonInterrupts()
     if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC)
         detachInterrupt(settingsMap[user]);
 #elif defined(BUTTON_PIN)
+#if !defined(USERPREFS_BUTTON_PIN)
     detachInterrupt(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN);
 #endif
+#if defined(USERPREFS_BUTTON_PIN)
+    detachInterrupt(config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN);
+#endif
+#endif
 
 #ifdef BUTTON_PIN_ALT
     detachInterrupt(BUTTON_PIN_ALT);
@@ -310,7 +336,7 @@ void ButtonThread::userButtonMultiPressed(void *callerThread)
 // Non-static method, runs during callback. Grabs info while still valid
 void ButtonThread::storeClickCount()
 {
-#ifdef BUTTON_PIN
+#if defined(BUTTON_PIN) || defined(USERPREFS_BUTTON_PIN)
     multipressClickCount = userButton.getNumberClicks();
 #endif
 }

src/ButtonThread.h

@@ -38,7 +38,7 @@ class ButtonThread : public concurrency::OSThread
     void storeClickCount();
 
   private:
-#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO) || defined(USERPREFS_BUTTON_PIN)
     static OneButton userButton; // Static - accessed from an interrupt
 #endif
 #ifdef BUTTON_PIN_ALT

src/FSCommon.cpp

@@ -24,11 +24,16 @@ SPIClass SPI1(HSPI);
 
 #endif // HAS_SDCARD
 
-#if defined(ARCH_STM32WL)
+#if defined(ARCH_APOLLO3)
+// Apollo series 2 Kbytes (8 rows of 256 bytes)
 
 uint16_t OSFS::startOfEEPROM = 1;
 uint16_t OSFS::endOfEEPROM = 2048;
 
+// Useful consts
+const OSFS::result noerr = OSFS::result::NO_ERROR;
+const OSFS::result notfound = OSFS::result::FILE_NOT_FOUND;
+
 // 3) How do I read from the medium?
 void OSFS::readNBytes(uint16_t address, unsigned int num, byte *output)
 {
@@ -53,7 +58,7 @@ bool lfs_assert_failed =
 
 extern "C" void lfs_assert(const char *reason)
 {
-    LOG_ERROR("LFS assert: %s\n", reason);
+    LOG_ERROR("LFS assert: %s", reason);
     lfs_assert_failed = true;
 }
 
@@ -66,7 +71,7 @@ extern "C" void lfs_assert(const char *reason)
  */
 bool copyFile(const char *from, const char *to)
 {
-#ifdef ARCH_STM32WL
+#if defined(ARCH_STM32WL) || defined(ARCH_APOLLO3)
     unsigned char cbuffer[2048];
 
     // Var to hold the result of actions
@@ -75,19 +80,19 @@ bool copyFile(const char *from, const char *to)
     r = OSFS::getFile(from, cbuffer);
 
     if (r == notfound) {
-        LOG_ERROR("Failed to open source file %s\n", from);
+        LOG_ERROR("Failed to open source file %s", from);
         return false;
     } else if (r == noerr) {
         r = OSFS::newFile(to, cbuffer, true);
         if (r == noerr) {
             return true;
         } else {
-            LOG_ERROR("OSFS Error %d\n", r);
+            LOG_ERROR("OSFS Error %d", r);
             return false;
         }
 
     } else {
-        LOG_ERROR("OSFS Error %d\n", r);
+        LOG_ERROR("OSFS Error %d", r);
         return false;
     }
     return true;
@@ -97,13 +102,13 @@ bool copyFile(const char *from, const char *to)
 
     File f1 = FSCom.open(from, FILE_O_READ);
     if (!f1) {
-        LOG_ERROR("Failed to open source file %s\n", from);
+        LOG_ERROR("Failed to open source file %s", from);
         return false;
     }
 
     File f2 = FSCom.open(to, FILE_O_WRITE);
     if (!f2) {
-        LOG_ERROR("Failed to open destination file %s\n", to);
+        LOG_ERROR("Failed to open destination file %s", to);
         return false;
     }
 
@@ -129,7 +134,7 @@ bool copyFile(const char *from, const char *to)
  */
 bool renameFile(const char *pathFrom, const char *pathTo)
 {
-#ifdef ARCH_STM32WL
+#if defined(ARCH_STM32WL) || defined(ARCH_APOLLO3)
     if (copyFile(pathFrom, pathTo) && (OSFS::deleteFile(pathFrom) == OSFS::result::NO_ERROR)) {
         return true;
     } else {
@@ -231,7 +236,7 @@ void listDir(const char *dirname, uint8_t levels, bool del)
 #ifdef ARCH_ESP32
                 listDir(file.path(), levels - 1, del);
                 if (del) {
-                    LOG_DEBUG("Removing %s\n", file.path());
+                    LOG_DEBUG("Remove %s", file.path());
                     strncpy(buffer, file.path(), sizeof(buffer));
                     file.close();
                     FSCom.rmdir(buffer);
@@ -241,7 +246,7 @@ void listDir(const char *dirname, uint8_t levels, bool del)
 #elif (defined(ARCH_RP2040) || defined(ARCH_PORTDUINO))
                 listDir(file.name(), levels - 1, del);
                 if (del) {
-                    LOG_DEBUG("Removing %s\n", file.name());
+                    LOG_DEBUG("Remove %s", file.name());
                     strncpy(buffer, file.name(), sizeof(buffer));
                     file.close();
                     FSCom.rmdir(buffer);
@@ -249,7 +254,7 @@ void listDir(const char *dirname, uint8_t levels, bool del)
                     file.close();
                 }
 #else
-                LOG_DEBUG(" %s (directory)\n", file.name());
+                LOG_DEBUG(" %s (directory)", file.name());
                 listDir(file.name(), levels - 1, del);
                 file.close();
 #endif
@@ -257,26 +262,26 @@ void listDir(const char *dirname, uint8_t levels, bool del)
         } else {
 #ifdef ARCH_ESP32
             if (del) {
-                LOG_DEBUG("Deleting %s\n", file.path());
+                LOG_DEBUG("Delete %s", file.path());
                 strncpy(buffer, file.path(), sizeof(buffer));
                 file.close();
                 FSCom.remove(buffer);
             } else {
-                LOG_DEBUG(" %s (%i Bytes)\n", file.path(), file.size());
+                LOG_DEBUG(" %s (%i Bytes)", file.path(), file.size());
                 file.close();
             }
 #elif (defined(ARCH_RP2040) || defined(ARCH_PORTDUINO))
             if (del) {
-                LOG_DEBUG("Deleting %s\n", file.name());
+                LOG_DEBUG("Delete %s", file.name());
                 strncpy(buffer, file.name(), sizeof(buffer));
                 file.close();
                 FSCom.remove(buffer);
             } else {
-                LOG_DEBUG(" %s (%i Bytes)\n", file.name(), file.size());
+                LOG_DEBUG(" %s (%i Bytes)", file.name(), file.size());
                 file.close();
             }
 #else
-            LOG_DEBUG("   %s (%i Bytes)\n", file.name(), file.size());
+            LOG_DEBUG("   %s (%i Bytes)", file.name(), file.size());
             file.close();
 #endif
         }
@@ -284,7 +289,7 @@ void listDir(const char *dirname, uint8_t levels, bool del)
     }
 #ifdef ARCH_ESP32
     if (del) {
-        LOG_DEBUG("Removing %s\n", root.path());
+        LOG_DEBUG("Remove %s", root.path());
         strncpy(buffer, root.path(), sizeof(buffer));
         root.close();
         FSCom.rmdir(buffer);
@@ -293,7 +298,7 @@ void listDir(const char *dirname, uint8_t levels, bool del)
     }
 #elif (defined(ARCH_RP2040) || defined(ARCH_PORTDUINO))
     if (del) {
-        LOG_DEBUG("Removing %s\n", root.name());
+        LOG_DEBUG("Remove %s", root.name());
         strncpy(buffer, root.name(), sizeof(buffer));
         root.close();
         FSCom.rmdir(buffer);
@@ -329,13 +334,13 @@ void fsInit()
 {
 #ifdef FSCom
     if (!FSBegin()) {
-        LOG_ERROR("Filesystem mount Failed.\n");
+        LOG_ERROR("Filesystem mount failed");
         // assert(0); This auto-formats the partition, so no need to fail here.
     }
 #if defined(ARCH_ESP32)
-    LOG_DEBUG("Filesystem files (%d/%d Bytes):\n", FSCom.usedBytes(), FSCom.totalBytes());
+    LOG_DEBUG("Filesystem files (%d/%d Bytes):", FSCom.usedBytes(), FSCom.totalBytes());
 #else
-    LOG_DEBUG("Filesystem files:\n");
+    LOG_DEBUG("Filesystem files:");
 #endif
     listDir("/", 10);
 #endif
@@ -350,28 +355,28 @@ void setupSDCard()
     SDHandler.begin(SPI_SCK, SPI_MISO, SPI_MOSI);
 
     if (!SD.begin(SDCARD_CS, SDHandler)) {
-        LOG_DEBUG("No SD_MMC card detected\n");
+        LOG_DEBUG("No SD_MMC card detected");
         return;
     }
     uint8_t cardType = SD.cardType();
     if (cardType == CARD_NONE) {
-        LOG_DEBUG("No SD_MMC card attached\n");
+        LOG_DEBUG("No SD_MMC card attached");
         return;
     }
     LOG_DEBUG("SD_MMC Card Type: ");
     if (cardType == CARD_MMC) {
-        LOG_DEBUG("MMC\n");
+        LOG_DEBUG("MMC");
     } else if (cardType == CARD_SD) {
-        LOG_DEBUG("SDSC\n");
+        LOG_DEBUG("SDSC");
     } else if (cardType == CARD_SDHC) {
-        LOG_DEBUG("SDHC\n");
+        LOG_DEBUG("SDHC");
     } else {
-        LOG_DEBUG("UNKNOWN\n");
+        LOG_DEBUG("UNKNOWN");
     }
 
     uint64_t cardSize = SD.cardSize() / (1024 * 1024);
-    LOG_DEBUG("SD Card Size: %lluMB\n", cardSize);
+    LOG_DEBUG("SD Card Size: %lu MB", (uint32_t)cardSize);
-    LOG_DEBUG("Total space: %llu MB\n", SD.totalBytes() / (1024 * 1024));
+    LOG_DEBUG("Total space: %lu MB", (uint32_t)(SD.totalBytes() / (1024 * 1024)));
-    LOG_DEBUG("Used space: %llu MB\n", SD.usedBytes() / (1024 * 1024));
+    LOG_DEBUG("Used space: %lu MB", (uint32_t)(SD.usedBytes() / (1024 * 1024)));
 #endif
 }

src/FSCommon.h

@@ -24,6 +24,25 @@ const OSFS::result noerr = OSFS::result::NO_ERROR;
 const OSFS::result notfound = OSFS::result::FILE_NOT_FOUND;
 #endif
 
+#if defined(ARCH_APOLLO3)
+// Apollo series 2 Kbytes (8 rows of 256 bytes)
+#include <EEPROM.h>
+#include <OSFS.h>
+
+extern uint16_t OSFS::startOfEEPROM;
+extern uint16_t OSFS::endOfEEPROM;
+
+// Useful consts
+extern const OSFS::result noerr;
+extern const OSFS::result notfound;
+
+// 3) How do I read from the medium?
+void OSFS::readNBytes(uint16_t address, unsigned int num, byte *output);
+
+// 4) How to I write to the medium?
+void OSFS::writeNBytes(uint16_t address, unsigned int num, const byte *input);
+#endif
+
 #if defined(ARCH_RP2040)
 // RP2040
 #include "LittleFS.h"

src/GPSStatus.h

@@ -50,9 +50,6 @@ class GPSStatus : public Status
     int32_t getLatitude() const
     {
         if (config.position.fixed_position) {
-#ifdef GPS_EXTRAVERBOSE
-            LOG_WARN("Using fixed latitude\n");
-#endif
             meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeDB->getNodeNum());
             return node->position.latitude_i;
         } else {
@@ -63,9 +60,6 @@ class GPSStatus : public Status
     int32_t getLongitude() const
     {
         if (config.position.fixed_position) {
-#ifdef GPS_EXTRAVERBOSE
-            LOG_WARN("Using fixed longitude\n");
-#endif
             meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeDB->getNodeNum());
             return node->position.longitude_i;
         } else {
@@ -76,9 +70,6 @@ class GPSStatus : public Status
     int32_t getAltitude() const
     {
         if (config.position.fixed_position) {
-#ifdef GPS_EXTRAVERBOSE
-            LOG_WARN("Using fixed altitude\n");
-#endif
             meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeDB->getNodeNum());
             return node->position.altitude;
         } else {
@@ -94,8 +85,8 @@ class GPSStatus : public Status
 
     bool matches(const GPSStatus *newStatus) const
     {
-#ifdef GPS_EXTRAVERBOSE
+#ifdef GPS_DEBUG
-        LOG_DEBUG("GPSStatus.match() new pos@%x to old pos@%x\n", newStatus->p.timestamp, p.timestamp);
+        LOG_DEBUG("GPSStatus.match() new pos@%x to old pos@%x", newStatus->p.timestamp, p.timestamp);
 #endif
         return (newStatus->hasLock != hasLock || newStatus->isConnected != isConnected ||
                 newStatus->isPowerSaving != isPowerSaving || newStatus->p.latitude_i != p.latitude_i ||
@@ -112,7 +103,7 @@ class GPSStatus : public Status
 
         if (isDirty && p.timestamp && (newStatus->p.timestamp == p.timestamp)) {
             // We can NEVER be in two locations at the same time! (also PR #886)
-            LOG_ERROR("BUG: Positional timestamp unchanged from prev solution\n");
+            LOG_ERROR("BUG: Positional timestamp unchanged from prev solution");
         }
 
         initialized = true;
@@ -124,11 +115,11 @@ class GPSStatus : public Status
         if (isDirty) {
             if (hasLock) {
                 // In debug logs, identify position by @timestamp:stage (stage 3 = notify)
-                LOG_DEBUG("New GPS pos@%x:3 lat=%f lon=%f alt=%d pdop=%.2f track=%.2f speed=%.2f sats=%d\n", p.timestamp,
+                LOG_DEBUG("New GPS pos@%x:3 lat=%f lon=%f alt=%d pdop=%.2f track=%.2f speed=%.2f sats=%d", p.timestamp,
                           p.latitude_i * 1e-7, p.longitude_i * 1e-7, p.altitude, p.PDOP * 1e-2, p.ground_track * 1e-5,
                           p.ground_speed * 1e-2, p.sats_in_view);
             } else {
-                LOG_DEBUG("No GPS lock\n");
+                LOG_DEBUG("No GPS lock");
             }
             onNewStatus.notifyObservers(this);
         }

src/GpioLogic.cpp

@@ -12,7 +12,6 @@ void GpioVirtPin::set(bool value)
 
 void GpioHwPin::set(bool value)
 {
-    // if (num == 3) LOG_DEBUG("Setting pin %d to %d\n", num, value);
     pinMode(num, OUTPUT);
     digitalWrite(num, value);
 }
@@ -66,7 +65,7 @@ GpioBinaryTransformer::GpioBinaryTransformer(GpioVirtPin *inPin1, GpioVirtPin *i
     assert(!inPin2->dependentPin); // We only allow one dependent pin
     inPin2->dependentPin = this;
 
-    // Don't update at construction time, because various GpioPins might be global constructor based not yet initied because
+    // Don't update at construction time, because various GpioPins might be global constructor based not yet initiated because
     // order of operations for global constructors is not defined.
     // update();
 }
@@ -88,7 +87,6 @@ void GpioBinaryTransformer::update()
             newValue = (GpioVirtPin::PinState)(p1 && p2);
             break;
         case Or:
-            // LOG_DEBUG("Doing GPIO OR\n");
             newValue = (GpioVirtPin::PinState)(p1 || p2);
             break;
         case Xor:
@@ -101,4 +99,4 @@ void GpioBinaryTransformer::update()
     set(newValue);
 }
 
-GpioSplitter::GpioSplitter(GpioPin *outPin1, GpioPin *outPin2) : outPin1(outPin1), outPin2(outPin2) {}
+GpioSplitter::GpioSplitter(GpioPin *outPin1, GpioPin *outPin2) : outPin1(outPin1), outPin2(outPin2) {}

src/NodeStatus.h

@@ -56,7 +56,7 @@ class NodeStatus : public Status
             numTotal = newStatus->getNumTotal();
         }
         if (isDirty || newStatus->forceUpdate) {
-            LOG_DEBUG("Node status update: %d online, %d total\n", numOnline, numTotal);
+            LOG_DEBUG("Node status update: %d online, %d total", numOnline, numTotal);
             onNewStatus.notifyObservers(this);
         }
         return 0;

src/Power.cpp

@@ -13,6 +13,7 @@
 #include "power.h"
 #include "NodeDB.h"
 #include "PowerFSM.h"
+#include "Throttle.h"
 #include "buzz/buzz.h"
 #include "configuration.h"
 #include "main.h"
@@ -30,6 +31,7 @@
 #if HAS_WIFI
 #include <WiFi.h>
 #endif
+
 #endif
 
 #ifndef DELAY_FOREVER
@@ -75,6 +77,15 @@ INA219Sensor ina219Sensor;
 INA3221Sensor ina3221Sensor;
 #endif
 
+#if !MESHTASTIC_EXCLUDE_I2C && !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
+#include "modules/Telemetry/Sensor/MAX17048Sensor.h"
+#include <utility>
+extern std::pair<uint8_t, TwoWire *> nodeTelemetrySensorsMap[_meshtastic_TelemetrySensorType_MAX + 1];
+#if HAS_TELEMETRY && (!MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR || !MESHTASTIC_EXCLUDE_POWER_TELEMETRY)
+MAX17048Sensor max17048Sensor;
+#endif
+#endif
+
 #if HAS_RAKPROT && !defined(ARCH_PORTDUINO)
 RAK9154Sensor rak9154Sensor;
 #endif
@@ -136,14 +147,23 @@ using namespace meshtastic;
  */
 static HasBatteryLevel *batteryLevel; // Default to NULL for no battery level sensor
 
+#ifdef BATTERY_PIN
+
 static void adcEnable()
 {
 #ifdef ADC_CTRL // enable adc voltage divider when we need to read
 #ifdef ADC_USE_PULLUP
     pinMode(ADC_CTRL, INPUT_PULLUP);
+#else
+#ifdef HELTEC_V3
+    pinMode(ADC_CTRL, INPUT);
+    uint8_t adc_ctl_enable_value = !(digitalRead(ADC_CTRL));
+    pinMode(ADC_CTRL, OUTPUT);
+    digitalWrite(ADC_CTRL, adc_ctl_enable_value);
 #else
     pinMode(ADC_CTRL, OUTPUT);
     digitalWrite(ADC_CTRL, ADC_CTRL_ENABLED);
+#endif
 #endif
     delay(10);
 #endif
@@ -154,17 +174,24 @@ static void adcDisable()
 #ifdef ADC_CTRL // disable adc voltage divider when we need to read
 #ifdef ADC_USE_PULLUP
     pinMode(ADC_CTRL, INPUT_PULLDOWN);
+#else
+#ifdef HELTEC_V3
+    pinMode(ADC_CTRL, ANALOG);
 #else
     digitalWrite(ADC_CTRL, !ADC_CTRL_ENABLED);
 #endif
 #endif
+#endif
 }
 
+#endif
+
 /**
  * A simple battery level sensor that assumes the battery voltage is attached via a voltage-divider to an analog input
  */
 class AnalogBatteryLevel : public HasBatteryLevel
 {
+  public:
     /**
      * Battery state of charge, from 0 to 100 or -1 for unknown
      */
@@ -224,7 +251,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
 #if HAS_TELEMETRY && !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !defined(HAS_PMU) &&                                  \
     !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
         if (hasINA()) {
-            LOG_DEBUG("Using INA on I2C addr 0x%x for device battery voltage\n", config.power.device_battery_ina_address);
             return getINAVoltage();
         }
 #endif
@@ -244,7 +270,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
             config.power.adc_multiplier_override > 0 ? config.power.adc_multiplier_override : ADC_MULTIPLIER;
         // Do not call analogRead() often.
         const uint32_t min_read_interval = 5000;
-        if (millis() - last_read_time_ms > min_read_interval) {
+        if (!initial_read_done || !Throttle::isWithinTimespanMs(last_read_time_ms, min_read_interval)) {
             last_read_time_ms = millis();
 
             uint32_t raw = 0;
@@ -274,7 +300,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
                 last_read_value += (scaled - last_read_value) * 0.5; // Virtual LPF
             }
 
-            // LOG_DEBUG("battery gpio %d raw val=%u scaled=%u filtered=%u\n", BATTERY_PIN, raw, (uint32_t)(scaled), (uint32_t)
+            // LOG_DEBUG("battery gpio %d raw val=%u scaled=%u filtered=%u", BATTERY_PIN, raw, (uint32_t)(scaled), (uint32_t)
             // (last_read_value));
         }
         return last_read_value;
@@ -319,7 +345,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
                 raw += adc_buf;
                 raw_c++; // Count valid samples
             } else {
-                LOG_DEBUG("An attempt to sample ADC2 failed\n");
+                LOG_DEBUG("An attempt to sample ADC2 failed");
             }
         }
 
@@ -344,7 +370,12 @@ class AnalogBatteryLevel : public HasBatteryLevel
     /**
      * return true if there is a battery installed in this unit
      */
+    // if we have a integrated device with a battery, we can assume that the battery is always connected
+#ifdef BATTERY_IMMUTABLE
+    virtual bool isBatteryConnect() override { return true; }
+#else
     virtual bool isBatteryConnect() override { return getBatteryPercent() != -1; }
+#endif
 
     /// If we see a battery voltage higher than physics allows - assume charger is pumping
     /// in power
@@ -479,7 +510,7 @@ bool Power::analogInit()
 #endif
 
 #ifdef BATTERY_PIN
-    LOG_DEBUG("Using analog input %d for battery level\n", BATTERY_PIN);
+    LOG_DEBUG("Use analog input %d for battery level", BATTERY_PIN);
 
     // disable any internal pullups
     pinMode(BATTERY_PIN, INPUT);
@@ -510,18 +541,18 @@ bool Power::analogInit()
     esp_adc_cal_value_t val_type = esp_adc_cal_characterize(unit, atten, width, DEFAULT_VREF, adc_characs);
     // show ADC characterization base
     if (val_type == ESP_ADC_CAL_VAL_EFUSE_TP) {
-        LOG_INFO("ADCmod: ADC characterization based on Two Point values stored in eFuse\n");
+        LOG_INFO("ADC config based on Two Point values stored in eFuse");
     } else if (val_type == ESP_ADC_CAL_VAL_EFUSE_VREF) {
-        LOG_INFO("ADCmod: ADC characterization based on reference voltage stored in eFuse\n");
+        LOG_INFO("ADC config based on reference voltage stored in eFuse");
     }
 #ifdef CONFIG_IDF_TARGET_ESP32S3
     // ESP32S3
     else if (val_type == ESP_ADC_CAL_VAL_EFUSE_TP_FIT) {
-        LOG_INFO("ADCmod: ADC Characterization based on Two Point values and fitting curve coefficients stored in eFuse\n");
+        LOG_INFO("ADC config based on Two Point values and fitting curve coefficients stored in eFuse");
     }
 #endif
     else {
-        LOG_INFO("ADCmod: ADC characterization based on default reference voltage\n");
+        LOG_INFO("ADC config based on default reference voltage");
     }
 #endif // ARCH_ESP32
 
@@ -551,7 +582,12 @@ bool Power::analogInit()
  */
 bool Power::setup()
 {
-    bool found = axpChipInit() || analogInit();
+    // initialise one power sensor (only)
+    bool found = axpChipInit();
+    if (!found)
+        found = lipoInit();
+    if (!found)
+        found = analogInit();
 
 #ifdef NRF_APM
     found = true;
@@ -565,9 +601,9 @@ bool Power::setup()
 
 void Power::shutdown()
 {
-    LOG_INFO("Shutting down\n");
+    LOG_INFO("Shutting down");
 
-#if defined(ARCH_NRF52) || defined(ARCH_ESP32)
+#if defined(ARCH_NRF52) || defined(ARCH_ESP32) || defined(ARCH_RP2040)
 #ifdef PIN_LED1
     ledOff(PIN_LED1);
 #endif
@@ -577,7 +613,7 @@ void Power::shutdown()
 #ifdef PIN_LED3
     ledOff(PIN_LED3);
 #endif
-    doDeepSleep(DELAY_FOREVER, false);
+    doDeepSleep(DELAY_FOREVER, false, false);
 #endif
 }
 
@@ -603,7 +639,7 @@ void Power::readPowerStatus()
                 batteryChargePercent = batteryLevel->getBatteryPercent();
             } else {
                 // If the AXP192 returns a percentage less than 0, the feature is either not supported or there is an error
-                // In that case, we compute an estimate of the charge percent based on open circuite voltage table defined
+                // In that case, we compute an estimate of the charge percent based on open circuit voltage table defined
                 // in power.h
                 batteryChargePercent = clamp((int)(((batteryVoltageMv - (OCV[NUM_OCV_POINTS - 1] * NUM_CELLS)) * 1e2) /
                                                    ((OCV[0] * NUM_CELLS) - (OCV[NUM_OCV_POINTS - 1] * NUM_CELLS))),
@@ -620,7 +656,7 @@ void Power::readPowerStatus()
                // changes.
 
     nrfx_power_usb_state_t nrf_usb_state = nrfx_power_usbstatus_get();
-    // LOG_DEBUG("NRF Power %d\n", nrf_usb_state);
+    // LOG_DEBUG("NRF Power %d", nrf_usb_state);
 
     // If changed to DISCONNECTED
     if (nrf_usb_state == NRFX_POWER_USB_STATE_DISCONNECTED)
@@ -633,22 +669,22 @@ void Power::readPowerStatus()
 
     // Notify any status instances that are observing us
     const PowerStatus powerStatus2 = PowerStatus(hasBattery, usbPowered, isCharging, batteryVoltageMv, batteryChargePercent);
-    LOG_DEBUG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d\n", powerStatus2.getHasUSB(),
+    LOG_DEBUG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d", powerStatus2.getHasUSB(), powerStatus2.getIsCharging(),
-              powerStatus2.getIsCharging(), powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
+              powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
     newStatus.notifyObservers(&powerStatus2);
 #ifdef DEBUG_HEAP
     if (lastheap != memGet.getFreeHeap()) {
-        LOG_DEBUG("Threads running:");
+        std::string threadlist = "Threads running:";
         int running = 0;
         for (int i = 0; i < MAX_THREADS; i++) {
             auto thread = concurrency::mainController.get(i);
             if ((thread != nullptr) && (thread->enabled)) {
-                LOG_DEBUG(" %s", thread->ThreadName.c_str());
+                threadlist += vformat(" %s", thread->ThreadName.c_str());
                 running++;
             }
         }
-        LOG_DEBUG("\n");
+        LOG_DEBUG(threadlist.c_str());
-        LOG_DEBUG("Heap status: %d/%d bytes free (%d), running %d/%d threads\n", memGet.getFreeHeap(), memGet.getHeapSize(),
+        LOG_DEBUG("Heap status: %d/%d bytes free (%d), running %d/%d threads", memGet.getFreeHeap(), memGet.getHeapSize(),
                   memGet.getFreeHeap() - lastheap, running, concurrency::mainController.size(false));
         lastheap = memGet.getFreeHeap();
     }
@@ -681,13 +717,13 @@ void Power::readPowerStatus()
     if (batteryLevel && powerStatus2.getHasBattery() && !powerStatus2.getHasUSB()) {
         if (batteryLevel->getBattVoltage() < OCV[NUM_OCV_POINTS - 1]) {
             low_voltage_counter++;
-            LOG_DEBUG("Low voltage counter: %d/10\n", low_voltage_counter);
+            LOG_DEBUG("Low voltage counter: %d/10", low_voltage_counter);
             if (low_voltage_counter > 10) {
 #ifdef ARCH_NRF52
                 // We can't trigger deep sleep on NRF52, it's freezing the board
-                LOG_DEBUG("Low voltage detected, but not triggering deep sleep\n");
+                LOG_DEBUG("Low voltage detected, but not trigger deep sleep");
 #else
-                LOG_INFO("Low voltage detected, triggering deep sleep\n");
+                LOG_INFO("Low voltage detected, trigger deep sleep");
                 powerFSM.trigger(EVENT_LOW_BATTERY);
 #endif
             }
@@ -709,12 +745,12 @@ int32_t Power::runOnce()
         PMU->getIrqStatus();
 
         if (PMU->isVbusRemoveIrq()) {
-            LOG_INFO("USB unplugged\n");
+            LOG_INFO("USB unplugged");
             powerFSM.trigger(EVENT_POWER_DISCONNECTED);
         }
 
         if (PMU->isVbusInsertIrq()) {
-            LOG_INFO("USB plugged In\n");
+            LOG_INFO("USB plugged In");
             powerFSM.trigger(EVENT_POWER_CONNECTED);
         }
 
@@ -722,21 +758,21 @@ int32_t Power::runOnce()
         Other things we could check if we cared...
 
         if (PMU->isBatChagerStartIrq()) {
-            LOG_DEBUG("Battery start charging\n");
+            LOG_DEBUG("Battery start charging");
         }
         if (PMU->isBatChagerDoneIrq()) {
-            LOG_DEBUG("Battery fully charged\n");
+            LOG_DEBUG("Battery fully charged");
         }
         if (PMU->isBatInsertIrq()) {
-            LOG_DEBUG("Battery inserted\n");
+            LOG_DEBUG("Battery inserted");
         }
         if (PMU->isBatRemoveIrq()) {
-            LOG_DEBUG("Battery removed\n");
+            LOG_DEBUG("Battery removed");
         }
         */
 #ifndef T_WATCH_S3 // FIXME - why is this triggering on the T-Watch S3?
         if (PMU->isPekeyLongPressIrq()) {
-            LOG_DEBUG("PEK long button press\n");
+            LOG_DEBUG("PEK long button press");
             screen->setOn(false);
         }
 #endif
@@ -779,22 +815,22 @@ bool Power::axpChipInit()
     if (!PMU) {
         PMU = new XPowersAXP2101(*w);
         if (!PMU->init()) {
-            LOG_WARN("Failed to find AXP2101 power management\n");
+            LOG_WARN("No AXP2101 power management");
             delete PMU;
             PMU = NULL;
         } else {
-            LOG_INFO("AXP2101 PMU init succeeded, using AXP2101 PMU\n");
+            LOG_INFO("AXP2101 PMU init succeeded");
         }
     }
 
     if (!PMU) {
         PMU = new XPowersAXP192(*w);
         if (!PMU->init()) {
-            LOG_WARN("Failed to find AXP192 power management\n");
+            LOG_WARN("No AXP192 power management");
             delete PMU;
             PMU = NULL;
         } else {
-            LOG_INFO("AXP192 PMU init succeeded, using AXP192 PMU\n");
+            LOG_INFO("AXP192 PMU init succeeded");
         }
     }
 
@@ -950,56 +986,54 @@ bool Power::axpChipInit()
     PMU->enableVbusVoltageMeasure();
     PMU->enableBattVoltageMeasure();
 
-    LOG_DEBUG("=======================================================================\n");
     if (PMU->isChannelAvailable(XPOWERS_DCDC1)) {
-        LOG_DEBUG("DC1  : %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_DCDC1) ? "+" : "-",
+        LOG_DEBUG("DC1  : %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_DCDC1) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_DCDC1));
     }
     if (PMU->isChannelAvailable(XPOWERS_DCDC2)) {
-        LOG_DEBUG("DC2  : %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_DCDC2) ? "+" : "-",
+        LOG_DEBUG("DC2  : %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_DCDC2) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_DCDC2));
     }
     if (PMU->isChannelAvailable(XPOWERS_DCDC3)) {
-        LOG_DEBUG("DC3  : %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_DCDC3) ? "+" : "-",
+        LOG_DEBUG("DC3  : %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_DCDC3) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_DCDC3));
     }
     if (PMU->isChannelAvailable(XPOWERS_DCDC4)) {
-        LOG_DEBUG("DC4  : %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_DCDC4) ? "+" : "-",
+        LOG_DEBUG("DC4  : %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_DCDC4) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_DCDC4));
     }
     if (PMU->isChannelAvailable(XPOWERS_LDO2)) {
-        LOG_DEBUG("LDO2 : %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_LDO2) ? "+" : "-",
+        LOG_DEBUG("LDO2 : %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_LDO2) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_LDO2));
     }
     if (PMU->isChannelAvailable(XPOWERS_LDO3)) {
-        LOG_DEBUG("LDO3 : %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_LDO3) ? "+" : "-",
+        LOG_DEBUG("LDO3 : %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_LDO3) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_LDO3));
     }
     if (PMU->isChannelAvailable(XPOWERS_ALDO1)) {
-        LOG_DEBUG("ALDO1: %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_ALDO1) ? "+" : "-",
+        LOG_DEBUG("ALDO1: %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_ALDO1) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_ALDO1));
     }
     if (PMU->isChannelAvailable(XPOWERS_ALDO2)) {
-        LOG_DEBUG("ALDO2: %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_ALDO2) ? "+" : "-",
+        LOG_DEBUG("ALDO2: %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_ALDO2) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_ALDO2));
     }
     if (PMU->isChannelAvailable(XPOWERS_ALDO3)) {
-        LOG_DEBUG("ALDO3: %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_ALDO3) ? "+" : "-",
+        LOG_DEBUG("ALDO3: %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_ALDO3) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_ALDO3));
     }
     if (PMU->isChannelAvailable(XPOWERS_ALDO4)) {
-        LOG_DEBUG("ALDO4: %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_ALDO4) ? "+" : "-",
+        LOG_DEBUG("ALDO4: %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_ALDO4) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_ALDO4));
     }
     if (PMU->isChannelAvailable(XPOWERS_BLDO1)) {
-        LOG_DEBUG("BLDO1: %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_BLDO1) ? "+" : "-",
+        LOG_DEBUG("BLDO1: %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_BLDO1) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_BLDO1));
     }
     if (PMU->isChannelAvailable(XPOWERS_BLDO2)) {
-        LOG_DEBUG("BLDO2: %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_BLDO2) ? "+" : "-",
+        LOG_DEBUG("BLDO2: %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_BLDO2) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_BLDO2));
     }
-    LOG_DEBUG("=======================================================================\n");
 
 // We can safely ignore this approach for most (or all) boards because MCU turned off
 // earlier than battery discharged to 2.6V.
@@ -1042,4 +1076,82 @@ bool Power::axpChipInit()
 #else
     return false;
 #endif
-}
+}
+
+#if !MESHTASTIC_EXCLUDE_I2C && !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
+
+/**
+ * Wrapper class for an I2C MAX17048 Lipo battery sensor.
+ */
+class LipoBatteryLevel : public HasBatteryLevel
+{
+  private:
+    MAX17048Singleton *max17048 = nullptr;
+
+  public:
+    /**
+     * Init the I2C MAX17048 Lipo battery level sensor
+     */
+    bool runOnce()
+    {
+        if (max17048 == nullptr) {
+            max17048 = MAX17048Singleton::GetInstance();
+        }
+
+        // try to start if the sensor has been detected
+        if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_MAX17048].first != 0) {
+            return max17048->runOnce(nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_MAX17048].second);
+        }
+        return false;
+    }
+
+    /**
+     * Battery state of charge, from 0 to 100 or -1 for unknown
+     */
+    virtual int getBatteryPercent() override { return max17048->getBusBatteryPercent(); }
+
+    /**
+     * The raw voltage of the battery in millivolts, or NAN if unknown
+     */
+    virtual uint16_t getBattVoltage() override { return max17048->getBusVoltageMv(); }
+
+    /**
+     * return true if there is a battery installed in this unit
+     */
+    virtual bool isBatteryConnect() override { return max17048->isBatteryConnected(); }
+
+    /**
+     * return true if there is an external power source detected
+     */
+    virtual bool isVbusIn() override { return max17048->isExternallyPowered(); }
+
+    /**
+     * return true if the battery is currently charging
+     */
+    virtual bool isCharging() override { return max17048->isBatteryCharging(); }
+};
+
+LipoBatteryLevel lipoLevel;
+
+/**
+ * Init the Lipo battery level sensor
+ */
+bool Power::lipoInit()
+{
+    bool result = lipoLevel.runOnce();
+    LOG_DEBUG("Power::lipoInit lipo sensor is %s", result ? "ready" : "not ready yet");
+    if (!result)
+        return false;
+    batteryLevel = &lipoLevel;
+    return true;
+}
+
+#else
+/**
+ * The Lipo battery level sensor is unavailable - default to AnalogBatteryLevel
+ */
+bool Power::lipoInit()
+{
+    return false;
+}
+#endif

src/PowerFSM.cpp

@@ -53,16 +53,21 @@ static bool isPowered()
 
 static void sdsEnter()
 {
-    LOG_DEBUG("Enter state: SDS\n");
+    LOG_DEBUG("State: SDS");
     // FIXME - make sure GPS and LORA radio are off first - because we want close to zero current draw
-    doDeepSleep(Default::getConfiguredOrDefaultMs(config.power.sds_secs), false);
+    doDeepSleep(Default::getConfiguredOrDefaultMs(config.power.sds_secs), false, false);
 }
 
+static void lowBattSDSEnter()
+{
+    LOG_DEBUG("State: Lower batt SDS");
+    doDeepSleep(Default::getConfiguredOrDefaultMs(config.power.sds_secs), false, true);
+}
 extern Power *power;
 
 static void shutdownEnter()
 {
-    LOG_DEBUG("Enter state: SHUTDOWN\n");
+    LOG_DEBUG("State: SHUTDOWN");
     power->shutdown();
 }
 
@@ -72,16 +77,16 @@ static uint32_t secsSlept;
 
 static void lsEnter()
 {
-    LOG_INFO("lsEnter begin, ls_secs=%u\n", config.power.ls_secs);
+    LOG_INFO("lsEnter begin, ls_secs=%u", config.power.ls_secs);
     screen->setOn(false);
     secsSlept = 0; // How long have we been sleeping this time
 
-    // LOG_INFO("lsEnter end\n");
+    // LOG_INFO("lsEnter end");
 }
 
 static void lsIdle()
 {
-    // LOG_INFO("lsIdle begin ls_secs=%u\n", getPref_ls_secs());
+    // LOG_INFO("lsIdle begin ls_secs=%u", getPref_ls_secs());
 
 #ifdef ARCH_ESP32
 
@@ -105,7 +110,7 @@ static void lsIdle()
                 wakeCause2 = doLightSleep(100); // leave led on for 1ms
 
                 secsSlept += sleepTime;
-                // LOG_INFO("sleeping, flash led!\n");
+                // LOG_INFO("Sleep, flash led!");
                 break;
 
             case ESP_SLEEP_WAKEUP_UART:
@@ -137,7 +142,7 @@ static void lsIdle()
     } else {
         // Time to stop sleeping!
         ledBlink.set(false);
-        LOG_INFO("Reached ls_secs, servicing loop()\n");
+        LOG_INFO("Reached ls_secs, service loop()");
         powerFSM.trigger(EVENT_WAKE_TIMER);
     }
 #endif
@@ -145,12 +150,12 @@ static void lsIdle()
 
 static void lsExit()
 {
-    LOG_INFO("Exit state: LS\n");
+    LOG_INFO("Exit state: LS");
 }
 
 static void nbEnter()
 {
-    LOG_DEBUG("Enter state: NB\n");
+    LOG_DEBUG("State: NB");
     screen->setOn(false);
 #ifdef ARCH_ESP32
     // Only ESP32 should turn off bluetooth
@@ -168,7 +173,7 @@ static void darkEnter()
 
 static void serialEnter()
 {
-    LOG_DEBUG("Enter state: SERIAL\n");
+    LOG_DEBUG("State: SERIAL");
     setBluetoothEnable(false);
     screen->setOn(true);
     screen->print("Serial connected\n");
@@ -183,10 +188,10 @@ static void serialExit()
 
 static void powerEnter()
 {
-    // LOG_DEBUG("Enter state: POWER\n");
+    // LOG_DEBUG("State: POWER");
     if (!isPowered()) {
-        // If we got here, we are in the wrong state - we should be in powered, let that state ahndle things
+        // If we got here, we are in the wrong state - we should be in powered, let that state handle things
-        LOG_INFO("Loss of power in Powered\n");
+        LOG_INFO("Loss of power in Powered");
         powerFSM.trigger(EVENT_POWER_DISCONNECTED);
     } else {
         screen->setOn(true);
@@ -205,7 +210,7 @@ static void powerIdle()
 {
     if (!isPowered()) {
         // If we got here, we are in the wrong state
-        LOG_INFO("Loss of power in Powered\n");
+        LOG_INFO("Loss of power in Powered");
         powerFSM.trigger(EVENT_POWER_DISCONNECTED);
     }
 }
@@ -222,7 +227,7 @@ static void powerExit()
 
 static void onEnter()
 {
-    LOG_DEBUG("Enter state: ON\n");
+    LOG_DEBUG("State: ON");
     screen->setOn(true);
     setBluetoothEnable(true);
 }
@@ -230,7 +235,7 @@ static void onEnter()
 static void onIdle()
 {
     if (isPowered()) {
-        // If we got here, we are in the wrong state - we should be in powered, let that state ahndle things
+        // If we got here, we are in the wrong state - we should be in powered, let that state handle things
         powerFSM.trigger(EVENT_POWER_CONNECTED);
     }
 }
@@ -242,11 +247,12 @@ static void screenPress()
 
 static void bootEnter()
 {
-    LOG_DEBUG("Enter state: BOOT\n");
+    LOG_DEBUG("State: BOOT");
 }
 
 State stateSHUTDOWN(shutdownEnter, NULL, NULL, "SHUTDOWN");
 State stateSDS(sdsEnter, NULL, NULL, "SDS");
+State stateLowBattSDS(lowBattSDSEnter, NULL, NULL, "SDS");
 State stateLS(lsEnter, lsIdle, lsExit, "LS");
 State stateNB(nbEnter, NULL, NULL, "NB");
 State stateDARK(darkEnter, NULL, NULL, "DARK");
@@ -264,7 +270,7 @@ void PowerFSM_setup()
                              config.device.role == meshtastic_Config_DeviceConfig_Role_SENSOR;
     bool hasPower = isPowered();
 
-    LOG_INFO("PowerFSM init, USB power=%d\n", hasPower ? 1 : 0);
+    LOG_INFO("PowerFSM init, USB power=%d", hasPower ? 1 : 0);
     powerFSM.add_timed_transition(&stateBOOT, hasPower ? &statePOWER : &stateON, 3 * 1000, NULL, "boot timeout");
 
     // wake timer expired or a packet arrived
@@ -291,12 +297,12 @@ void PowerFSM_setup()
                             "Press"); // Allow button to work while in serial API
 
     // Handle critically low power battery by forcing deep sleep
-    powerFSM.add_transition(&stateBOOT, &stateSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
+    powerFSM.add_transition(&stateBOOT, &stateLowBattSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
-    powerFSM.add_transition(&stateLS, &stateSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
+    powerFSM.add_transition(&stateLS, &stateLowBattSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
-    powerFSM.add_transition(&stateNB, &stateSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
+    powerFSM.add_transition(&stateNB, &stateLowBattSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
-    powerFSM.add_transition(&stateDARK, &stateSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
+    powerFSM.add_transition(&stateDARK, &stateLowBattSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
-    powerFSM.add_transition(&stateON, &stateSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
+    powerFSM.add_transition(&stateON, &stateLowBattSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
-    powerFSM.add_transition(&stateSERIAL, &stateSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
+    powerFSM.add_transition(&stateSERIAL, &stateLowBattSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
 
     // Handle being told to power off
     powerFSM.add_transition(&stateBOOT, &stateSHUTDOWN, EVENT_SHUTDOWN, NULL, "Shutdown");
@@ -371,7 +377,7 @@ void PowerFSM_setup()
 // We never enter light-sleep or NB states on NRF52 (because the CPU uses so little power normally)
 #ifdef ARCH_ESP32
     // See: https://github.com/meshtastic/firmware/issues/1071
-    // Don't add power saving transitions if we are a power saving tracker or sensor. Sleep will be initiatiated through the
+    // Don't add power saving transitions if we are a power saving tracker or sensor. Sleep will be initiated through the
     // modules
     if ((isRouter || config.power.is_power_saving) && !isTrackerOrSensor) {
         powerFSM.add_timed_transition(&stateNB, &stateLS,