trunk

* Support for T-Echo Lite, credts to @Szetya for doing all the heavy lifting!
* move define to ini file

.github/actions/setup-base/action.yml

@@ -5,7 +5,7 @@ runs:
   using: composite
   steps:
     - name: Checkout code
-      uses: actions/checkout@v4
+      uses: actions/checkout@v5
       with:
         submodules: recursive
         ref: ${{github.event.pull_request.head.ref}}

.github/workflows/build_debian_src.yml

@@ -24,7 +24,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           path: meshtasticd

.github/workflows/build_esp32.yml

@@ -1,37 +0,0 @@
-name: Build ESP32
-
-on:
-  workflow_call:
-    inputs:
-      board:
-        required: true
-        type: string
-
-permissions: read-all
-
-jobs:
-  build-esp32:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Build ESP32
-        id: build
-        uses: ./.github/actions/build-variant
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          remove-debug-flags: >-
-            ./arch/esp32/esp32.ini
-            ./arch/esp32/esp32s2.ini
-            ./arch/esp32/esp32s3.ini
-            ./arch/esp32/esp32c3.ini
-            ./arch/esp32/esp32c6.ini
-          build-script-path: bin/build-esp32.sh
-          ota-firmware-source: firmware.bin
-          ota-firmware-target: release/bleota.bin
-          artifact-paths: |
-            release/*.bin
-            release/*.elf
-          #include-web-ui: true
-          arch: esp32

.github/workflows/build_esp32_c3.yml

@@ -1,37 +0,0 @@
-name: Build ESP32-C3
-
-on:
-  workflow_call:
-    inputs:
-      board:
-        required: true
-        type: string
-
-permissions: read-all
-
-jobs:
-  build-esp32-c3:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Build ESP32-C3
-        id: build
-        uses: ./.github/actions/build-variant
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          remove-debug-flags: >-
-            ./arch/esp32/esp32.ini
-            ./arch/esp32/esp32s2.ini
-            ./arch/esp32/esp32s3.ini
-            ./arch/esp32/esp32c3.ini
-            ./arch/esp32/esp32c6.ini
-          build-script-path: bin/build-esp32.sh
-          ota-firmware-source: firmware-c3.bin
-          ota-firmware-target: release/bleota-c3.bin
-          artifact-paths: |
-            release/*.bin
-            release/*.elf
-          #include-web-ui: true
-          arch: esp32c3

.github/workflows/build_esp32_c6.yml

@@ -1,37 +0,0 @@
-name: Build ESP32-C6
-
-on:
-  workflow_call:
-    inputs:
-      board:
-        required: true
-        type: string
-
-permissions: read-all
-
-jobs:
-  build-esp32-c6:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Build ESP32-C6
-        id: build
-        uses: ./.github/actions/build-variant
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          remove-debug-flags: >-
-            ./arch/esp32/esp32.ini
-            ./arch/esp32/esp32s2.ini
-            ./arch/esp32/esp32s3.ini
-            ./arch/esp32/esp32c3.ini
-            ./arch/esp32/esp32c6.ini
-          build-script-path: bin/build-esp32.sh
-          ota-firmware-source: firmware-c3.bin
-          ota-firmware-target: release/bleota-c3.bin
-          artifact-paths: |
-            release/*.bin
-            release/*.elf
-          #include-web-ui: true
-          arch: esp32c6

.github/workflows/build_esp32_s3.yml

@@ -1,37 +0,0 @@
-name: Build ESP32-S3
-
-on:
-  workflow_call:
-    inputs:
-      board:
-        required: true
-        type: string
-
-permissions: read-all
-
-jobs:
-  build-esp32-s3:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Build ESP32-S3
-        id: build
-        uses: ./.github/actions/build-variant
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          remove-debug-flags: >-
-            ./arch/esp32/esp32.ini
-            ./arch/esp32/esp32s2.ini
-            ./arch/esp32/esp32s3.ini
-            ./arch/esp32/esp32c3.ini
-            ./arch/esp32/esp32c6.ini
-          build-script-path: bin/build-esp32.sh
-          ota-firmware-source: firmware-s3.bin
-          ota-firmware-target: release/bleota-s3.bin
-          artifact-paths: |
-            release/*.bin
-            release/*.elf
-          #include-web-ui: true
-          arch: esp32s3

.github/workflows/build_firmware.yml

@@ -0,0 +1,66 @@
+name: Build
+
+on:
+  workflow_call:
+    inputs:
+      version:
+        required: true
+        type: string
+      platform:
+        required: true
+        type: string
+      pio_env:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  pio-build:
+    name: build-${{ inputs.platform }}
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v5
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Set OTA firmware source and target
+        if: startsWith(inputs.platform, 'esp32')
+        id: ota_dir
+        env:
+          PIO_PLATFORM: ${{ inputs.platform }}
+        run: |
+          if [ "$PIO_PLATFORM" = "esp32s3" ]; then
+            echo "src=firmware-s3.bin" >> $GITHUB_OUTPUT
+            echo "tgt=release/bleota-s3.bin" >> $GITHUB_OUTPUT
+          elif [ "$PIO_PLATFORM" = "esp32c3" ] || [ "$PIO_PLATFORM" = "esp32c6" ]; then
+            echo "src=firmware-c3.bin" >> $GITHUB_OUTPUT
+            echo "tgt=release/bleota-c3.bin" >> $GITHUB_OUTPUT
+          elif [ "$PIO_PLATFORM" = "esp32" ]; then
+            echo "src=firmware.bin" >> $GITHUB_OUTPUT
+            echo "tgt=release/bleota.bin" >> $GITHUB_OUTPUT
+          fi
+
+      - name: Build ${{ inputs.platform }}
+        id: build
+        uses: meshtastic/gh-action-firmware@main
+        with:
+          pio_platform: ${{ inputs.platform }}
+          pio_env: ${{ inputs.pio_env }}
+          pio_target: build
+          ota_firmware_source: ${{ steps.ota_dir.outputs.src || '' }}
+          ota_firmware_target: ${{ steps.ota_dir.outputs.tgt || '' }}
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}.zip
+          overwrite: true
+          path: |
+            release/*.bin
+            release/*.elf
+            release/*.uf2
+            release/*.hex
+            release/*-ota.zip

.github/workflows/build_nrf52.yml

@@ -1,30 +0,0 @@
-name: Build NRF52
-
-on:
-  workflow_call:
-    inputs:
-      board:
-        required: true
-        type: string
-
-permissions: read-all
-
-jobs:
-  build-nrf52:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Build NRF52
-        id: build
-        uses: ./.github/actions/build-variant
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          build-script-path: bin/build-nrf52.sh
-          artifact-paths: |
-            release/*.hex
-            release/*.uf2
-            release/*.elf
-            release/*.zip
-          arch: nrf52840

.github/workflows/build_rpi2040.yml

@@ -1,28 +0,0 @@
-name: Build RPI2040
-
-on:
-  workflow_call:
-    inputs:
-      board:
-        required: true
-        type: string
-
-permissions: read-all
-
-jobs:
-  build-rpi2040:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Build Raspberry Pi 2040
-        id: build
-        uses: ./.github/actions/build-variant
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          build-script-path: bin/build-rpi2040.sh
-          artifact-paths: |
-            release/*.uf2
-            release/*.elf
-          arch: rp2040

.github/workflows/build_stm32.yml

@@ -1,29 +0,0 @@
-name: Build STM32
-
-on:
-  workflow_call:
-    inputs:
-      board:
-        required: true
-        type: string
-
-permissions: read-all
-
-jobs:
-  build-stm32:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Build STM32WL
-        id: build
-        uses: ./.github/actions/build-variant
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          build-script-path: bin/build-stm32.sh
-          artifact-paths: |
-            release/*.hex
-            release/*.bin
-            release/*.elf
-          arch: stm32

.github/workflows/daily_packaging.yml

@@ -30,7 +30,11 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        series: [plucky, oracular, noble, jammy]
+        series:
+          - jammy # 22.04
+          - noble # 24.04
+          - plucky # 25.04
+          - questing # 25.10
     uses: ./.github/workflows/package_ppa.yml
     with:
       ppa_repo: ppa:meshtastic/daily

.github/workflows/docker_build.yml

@@ -47,7 +47,7 @@ jobs:
     runs-on: ${{ inputs.runs-on }}
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/docker_manifest.yml

@@ -83,7 +83,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/hook_copr.yml

@@ -19,7 +19,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           ref: ${{ github.ref }}

.github/workflows/main_matrix.yml

@@ -30,18 +30,31 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32, check]
+        arch:
-    runs-on: ubuntu-latest
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
+          - check
+    runs-on: ubuntu-24.04
     steps:
-      - id: checkout
+      - uses: actions/checkout@v5
-        uses: actions/checkout@v4
+      - uses: actions/setup-python@v5
-        name: Checkout base
+        with:
-      - id: jsonStep
+          python-version: 3.x
+          cache: pip
+      - run: pip install -U platformio
+      - name: Generate matrix
+        id: jsonStep
         run: |
           if [[ "$GITHUB_HEAD_REF" == "" ]]; then
             TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
           else  
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} quick)
+            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} pr)
           fi
           echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF Targets: $TARGETS"
           echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
@@ -52,9 +65,25 @@ jobs:
       esp32c6: ${{ steps.jsonStep.outputs.esp32c6 }}
       nrf52840: ${{ steps.jsonStep.outputs.nrf52840 }}
       rp2040: ${{ steps.jsonStep.outputs.rp2040 }}
+      rp2350: ${{ steps.jsonStep.outputs.rp2350 }}
       stm32: ${{ steps.jsonStep.outputs.stm32 }}
       check: ${{ steps.jsonStep.outputs.check }}
 
+  version:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v5
+      - name: Get release version string
+        run: |
+          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
+        id: version
+        env:
+          BUILD_LOCATION: local
+    outputs:
+      long: ${{ steps.version.outputs.long }}
+      deb: ${{ steps.version.outputs.deb }}
+
   check:
     needs: setup
     strategy:
@@ -64,7 +93,7 @@ jobs:
     runs-on: ubuntu-latest
     if: ${{ github.event_name != 'workflow_dispatch' }}
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v5
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
@@ -72,69 +101,95 @@ jobs:
         run: bin/check-all.sh ${{ matrix.board }}
 
   build-esp32:
-    needs: setup
+    needs: [setup, version]
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.esp32) }}
-    uses: ./.github/workflows/build_esp32.yml
+    uses: ./.github/workflows/build_firmware.yml
     with:
-      board: ${{ matrix.board }}
+      version: ${{ needs.version.outputs.long }}
+      pio_env: ${{ matrix.board }}
+      platform: esp32
 
-  build-esp32-s3:
+  build-esp32s3:
-    needs: setup
+    needs: [setup, version]
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.esp32s3) }}
-    uses: ./.github/workflows/build_esp32_s3.yml
+    uses: ./.github/workflows/build_firmware.yml
     with:
-      board: ${{ matrix.board }}
+      version: ${{ needs.version.outputs.long }}
+      pio_env: ${{ matrix.board }}
+      platform: esp32s3
 
-  build-esp32-c3:
+  build-esp32c3:
-    needs: setup
+    needs: [setup, version]
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.esp32c3) }}
-    uses: ./.github/workflows/build_esp32_c3.yml
+    uses: ./.github/workflows/build_firmware.yml
     with:
-      board: ${{ matrix.board }}
+      version: ${{ needs.version.outputs.long }}
+      pio_env: ${{ matrix.board }}
+      platform: esp32c3
 
-  build-esp32-c6:
+  build-esp32c6:
-    needs: setup
+    needs: [setup, version]
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.esp32c6) }}
-    uses: ./.github/workflows/build_esp32_c6.yml
+    uses: ./.github/workflows/build_firmware.yml
     with:
-      board: ${{ matrix.board }}
+      version: ${{ needs.version.outputs.long }}
+      pio_env: ${{ matrix.board }}
+      platform: esp32c6
 
-  build-nrf52:
+  build-nrf52840:
-    needs: setup
+    needs: [setup, version]
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.nrf52840) }}
-    uses: ./.github/workflows/build_nrf52.yml
+    uses: ./.github/workflows/build_firmware.yml
     with:
-      board: ${{ matrix.board }}
+      version: ${{ needs.version.outputs.long }}
+      pio_env: ${{ matrix.board }}
+      platform: nrf52840
 
-  build-rpi2040:
+  build-rp2040:
-    needs: setup
+    needs: [setup, version]
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.rp2040) }}
-    uses: ./.github/workflows/build_rpi2040.yml
+    uses: ./.github/workflows/build_firmware.yml
     with:
-      board: ${{ matrix.board }}
+      version: ${{ needs.version.outputs.long }}
+      pio_env: ${{ matrix.board }}
+      platform: rp2040
+
+  build-rp2350:
+    needs: [setup, version]
+    strategy:
+      fail-fast: false
+      matrix: ${{ fromJson(needs.setup.outputs.rp2350) }}
+    uses: ./.github/workflows/build_firmware.yml
+    with:
+      version: ${{ needs.version.outputs.long }}
+      pio_env: ${{ matrix.board }}
+      platform: rp2350
 
   build-stm32:
-    needs: setup
+    needs: [setup, version]
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.stm32) }}
-    uses: ./.github/workflows/build_stm32.yml
+    uses: ./.github/workflows/build_firmware.yml
     with:
-      board: ${{ matrix.board }}
+      version: ${{ needs.version.outputs.long }}
+      pio_env: ${{ matrix.board }}
+      platform: stm32
 
   build-debian-src:
+    if: github.repository == 'meshtastic/firmware'
     uses: ./.github/workflows/build_debian_src.yml
     with:
       series: UNRELEASED
@@ -209,26 +264,36 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32]
+        arch:
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
     runs-on: ubuntu-latest
     needs:
       [
+        version,
         build-esp32,
-        build-esp32-s3,
+        build-esp32s3,
-        build-esp32-c3,
+        build-esp32c3,
-        build-esp32-c6,
+        build-esp32c6,
-        build-nrf52,
+        build-nrf52840,
-        build-rpi2040,
+        build-rp2040,
+        build-rp2350,
         build-stm32,
       ]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v4
+      - uses: actions/download-artifact@v5
         with:
           path: ./
           pattern: firmware-${{matrix.arch}}-*
@@ -237,17 +302,13 @@ jobs:
       - name: Display structure of downloaded files
         run: ls -R
 
-      - name: Get release version string
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
       - name: Move files up
         run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
         uses: actions/upload-artifact@v4
         with:
-          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
+          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           overwrite: true
           path: |
             ./firmware-*.bin
@@ -261,9 +322,9 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v4
+      - uses: actions/download-artifact@v5
         with:
-          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
+          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
           path: ./output
 
@@ -277,12 +338,12 @@ jobs:
           chmod +x ./output/device-update.sh
 
       - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip ./output
+        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
         uses: actions/upload-artifact@v4
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
+          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           overwrite: true
           path: ./*.elf
           retention-days: 30
@@ -290,8 +351,8 @@ jobs:
       - uses: scruplelesswizard/comment-artifact@main
         if: ${{ github.event_name == 'pull_request' }}
         with:
-          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
+          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          description: "Download firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
+          description: "Download firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
           github-token: ${{ secrets.GITHUB_TOKEN }}
 
   release-artifacts:
@@ -300,56 +361,49 @@ jobs:
     outputs:
       upload_url: ${{ steps.create_release.outputs.upload_url }}
     needs:
+      - version
       - gather-artifacts
       - build-debian-src
       - package-pio-deps-native-tft
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
 
       - name: Setup Python
         uses: actions/setup-python@v5
         with:
           python-version: 3.x
 
-      - name: Get release version string
-        run: |
-          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
-        id: version
-        env:
-          BUILD_LOCATION: local
-
       - name: Create release
         uses: softprops/action-gh-release@v2
         id: create_release
         with:
           draft: true
           prerelease: true
-          name: Meshtastic Firmware ${{ steps.version.outputs.long }} Alpha
+          name: Meshtastic Firmware ${{ needs.version.outputs.long }} Alpha
-          tag_name: v${{ steps.version.outputs.long }}
+          tag_name: v${{ needs.version.outputs.long }}
           body: |
             Autogenerated by github action, developer should edit as required before publishing...
 
       - name: Download source deb
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@v5
         with:
-          pattern: firmware-debian-${{ steps.version.outputs.deb }}~UNRELEASED-src
+          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
           merge-multiple: true
           path: ./output/debian-src
 
       - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@v5
         with:
-          pattern: platformio-deps-native-tft-${{ steps.version.outputs.long }}
+          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
           merge-multiple: true
           path: ./output/pio-deps-native-tft
 
       - name: Zip Linux sources
         working-directory: output
         run: |
-          zip -j -9 -r ./meshtasticd-${{ steps.version.outputs.deb }}-src.zip ./debian-src
+          zip -j -9 -r ./meshtasticd-${{ needs.version.outputs.deb }}-src.zip ./debian-src
-          zip -9 -r ./platformio-deps-native-tft-${{ steps.version.outputs.long }}.zip ./pio-deps-native-tft
+          zip -9 -r ./platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip ./pio-deps-native-tft
 
       # For diagnostics
       - name: Display structure of downloaded files
@@ -359,8 +413,8 @@ jobs:
         # Only run when targeting master branch with workflow_dispatch
         if: ${{ github.ref_name == 'master' }}
         run: |
-          gh release upload v${{ steps.version.outputs.long }} ./output/meshtasticd-${{ steps.version.outputs.deb }}-src.zip
+          gh release upload v${{ needs.version.outputs.long }} ./output/meshtasticd-${{ needs.version.outputs.deb }}-src.zip
-          gh release upload v${{ steps.version.outputs.long }} ./output/platformio-deps-native-tft-${{ steps.version.outputs.long }}.zip
+          gh release upload v${{ needs.version.outputs.long }} ./output/platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
@@ -368,26 +422,30 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32]
+        arch:
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
     runs-on: ubuntu-latest
     if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-artifacts]
+    needs: [release-artifacts, version]
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
 
       - name: Setup Python
         uses: actions/setup-python@v5
         with:
           python-version: 3.x
 
-      - name: Get release version string
+      - uses: actions/download-artifact@v5
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - uses: actions/download-artifact@v4
         with:
-          pattern: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
+          pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
           path: ./output
 
@@ -400,16 +458,16 @@ jobs:
           chmod +x ./output/device-update.sh
 
       - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip ./output
+        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
-      - uses: actions/download-artifact@v4
+      - uses: actions/download-artifact@v5
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
+          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           merge-multiple: true
           path: ./elfs
 
       - name: Zip debug elfs
-        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip ./elfs
+        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./elfs
 
       # For diagnostics
       - name: Display structure of downloaded files
@@ -419,33 +477,30 @@ jobs:
         # Only run when targeting master branch with workflow_dispatch
         if: ${{ github.ref_name == 'master' }}
         run: |
-          gh release upload v${{ steps.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
+          gh release upload v${{ needs.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
-          gh release upload v${{ steps.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
+          gh release upload v${{ needs.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
   publish-firmware:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-24.04
     if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-firmware]
+    needs: [release-firmware, version]
     env:
-      targets: esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,stm32
+      targets: |-
+        esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
 
       - name: Setup Python
         uses: actions/setup-python@v5
         with:
           python-version: 3.x
 
-      - name: Get release version string
+      - uses: actions/download-artifact@v5
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - uses: actions/download-artifact@v4
         with:
-          pattern: firmware-{${{ env.targets }}}-${{ steps.version.outputs.long }}
+          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
           merge-multiple: true
           path: ./publish
 
@@ -459,9 +514,9 @@ jobs:
           external_repository: meshtastic/meshtastic.github.io
           publish_branch: master
           publish_dir: ./publish
-          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ steps.version.outputs.long }}
+          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ needs.version.outputs.long }}
           keep_files: true
           user_name: github-actions[bot]
           user_email: github-actions[bot]@users.noreply.github.com
-          commit_message: ${{ steps.version.outputs.long }}
+          commit_message: ${{ needs.version.outputs.long }}
           enable_jekyll: true

.github/workflows/nightly.yml

@@ -8,12 +8,13 @@ permissions: read-all
 
 jobs:
   trunk_check:
+    if: github.repository == 'meshtastic/firmware'
     name: Trunk Check and Upload
     runs-on: ubuntu-24.04
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1
@@ -21,6 +22,7 @@ jobs:
           trunk-token: ${{ secrets.TRUNK_TOKEN }}
 
   trunk_upgrade:
+    if: github.repository == 'meshtastic/firmware'
     # See: https://github.com/trunk-io/trunk-action/blob/v1/readme.md#automatic-upgrades
     name: Trunk Upgrade (PR)
     runs-on: ubuntu-24.04
@@ -29,7 +31,7 @@ jobs:
       pull-requests: write # For trunk to create PRs
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
 
       - name: Trunk Upgrade
         uses: trunk-io/trunk-action/upgrade@v1

.github/workflows/package_obs.yml

@@ -34,7 +34,7 @@ jobs:
     needs: build-debian-src
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           path: meshtasticd
@@ -58,7 +58,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@v5
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/package_pio_deps.yml

@@ -24,7 +24,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/package_ppa.yml

@@ -32,7 +32,7 @@ jobs:
     needs: build-debian-src
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           path: meshtasticd
@@ -60,7 +60,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@v5
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/pr_enforce_labels.yml

@@ -0,0 +1,24 @@
+name: Check PR Labels
+
+on:
+  pull_request:
+    types: [opened, edited, labeled, unlabeled, synchronize, reopened]
+
+permissions:
+  pull-requests: read
+  contents: read
+
+jobs:
+  check-label:
+    runs-on: ubuntu-24.04
+    steps:
+      - name: Check for PR labels
+        uses: actions/github-script@v7
+        with:
+          script: |
+            const labels = context.payload.pull_request.labels.map(label => label.name);
+            const requiredLabels = ['bugfix', 'enhancement', 'hardware-support', 'dependencies', 'submodules', 'github_actions', 'trunk'];
+            const hasRequiredLabel = labels.some(label => requiredLabels.includes(label));
+            if (!hasRequiredLabel) {
+              core.setFailed(`PR must have at least one of the following labels before it can be merged: ${requiredLabels.join(', ')}.`);
+            }

.github/workflows/release_channels.yml

@@ -20,7 +20,11 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        series: [plucky, oracular, noble, jammy]
+        series:
+          - jammy # 22.04
+          - noble # 24.04
+          - plucky # 25.04
+          # - questing # 25.10
     uses: ./.github/workflows/package_ppa.yml
     with:
       ppa_repo: |-
@@ -56,7 +60,7 @@ jobs:
         shell: bash
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
 
       - name: Setup Python
         uses: actions/setup-python@v5
@@ -99,8 +103,9 @@ jobs:
         with:
           base: ${{ github.event.repository.default_branch }}
           branch: create-pull-request/bump-version
+          labels: github_actions
           title: Bump release version
-          commit-message: automated bumps
+          commit-message: Automated version bumps
           add-paths: |
             version.properties
             debian/changelog

.github/workflows/sec_sast_semgrep_cron.yml

@@ -13,6 +13,7 @@ permissions:
 
 jobs:
   semgrep-full:
+    if: github.repository == 'meshtastic/firmware'
     runs-on: ubuntu-24.04
     container:
       image: semgrep/semgrep
@@ -20,7 +21,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
 
       # step 2
       - name: full scan

.github/workflows/sec_sast_semgrep_pull.yml

@@ -13,7 +13,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
         with:
           fetch-depth: 0
 

.github/workflows/stale_bot.yml

@@ -11,6 +11,7 @@ permissions:
 
 jobs:
   stale_issues:
+    if: github.repository == 'meshtastic/firmware'
     name: Close Stale Issues
     runs-on: ubuntu-latest
 

.github/workflows/test_native.yml

@@ -14,7 +14,7 @@ jobs:
     name: Native Simulator Tests
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -70,7 +70,7 @@ jobs:
     name: Native PlatformIO Tests
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -127,7 +127,7 @@ jobs:
       - platformio-tests
     if: always()
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -137,20 +137,20 @@ jobs:
         id: version
 
       - name: Download test artifacts
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@v5
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           merge-multiple: true
 
       - name: Test Report
-        uses: dorny/test-reporter@v2.1.0
+        uses: dorny/test-reporter@v2.1.1
         with:
           name: PlatformIO Tests
           path: testreport.xml
           reporter: java-junit
 
       - name: Download coverage artifacts
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@v5
         with:
           pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}.zip
           path: code-coverage-report

.github/workflows/tests.yml

@@ -12,13 +12,15 @@ permissions:
 
 jobs:
   native-tests:
+    if: github.repository == 'meshtastic/firmware'
     uses: ./.github/workflows/test_native.yml
 
   hardware-tests:
+    if: github.repository == 'meshtastic/firmware'
     runs-on: test-runner
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
 
       # - uses: actions/setup-python@v5
       #   with:

.github/workflows/trunk_annotate_pr.yml

@@ -18,7 +18,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1

.github/workflows/trunk_check.yml

@@ -16,7 +16,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1

.github/workflows/trunk_format_pr.yml

@@ -15,7 +15,7 @@ jobs:
       pull-requests: write
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}

.github/workflows/update_protobufs.yml

@@ -11,7 +11,7 @@ jobs:
       pull-requests: write
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
         with:
           submodules: true
 
@@ -34,7 +34,9 @@ jobs:
         uses: peter-evans/create-pull-request@v7
         with:
           branch: create-pull-request/update-protobufs
+          labels: submodules
           title: Update protobufs and classes
+          commit-message: Update protobufs
           add-paths: |
             protobufs
             src/mesh

.trunk/trunk.yaml

@@ -1,6 +1,6 @@
 version: 0.1
 cli:
-  version: 1.24.0
+  version: 1.25.0
 plugins:
   sources:
     - id: trunk
@@ -8,15 +8,15 @@ plugins:
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.447
+    - checkov@3.2.461
-    - renovate@41.17.2
+    - renovate@41.71.1
     - prettier@3.6.2
-    - trufflehog@3.89.2
+    - trufflehog@3.90.4
     - yamllint@1.37.1
-    - bandit@1.8.5
+    - bandit@1.8.6
-    - trivy@0.64.0
+    - trivy@0.64.1
     - taplo@0.9.3
-    - ruff@0.12.1
+    - ruff@0.12.7
     - isort@6.0.1
     - markdownlint@0.45.0
     - oxipng@9.1.5
@@ -28,7 +28,7 @@ lint:
     - shellcheck@0.10.0
     - black@25.1.0
     - git-diff-check
-    - gitleaks@8.27.2
+    - gitleaks@8.28.0
     - clang-format@16.0.3
   ignore:
     - linters: [ALL]

Dockerfile

@@ -3,7 +3,7 @@
 # trunk-ignore-all(hadolint/DL3008): Do not pin apt package versions
 # trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
 
-FROM python:3.13-bookworm AS builder
+FROM python:3.13-slim-trixie AS builder
 ARG PIO_ENV=native
 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Etc/UTC
@@ -36,7 +36,7 @@ RUN curl -L "https://github.com/meshtastic/web/releases/download/v$(cat /tmp/fir
 
 ##### PRODUCTION BUILD #############
 
-FROM debian:bookworm-slim
+FROM debian:trixie-slim
 LABEL org.opencontainers.image.title="Meshtastic" \
       org.opencontainers.image.description="Debian Meshtastic daemon and web interface" \
       org.opencontainers.image.url="https://meshtastic.org" \
@@ -51,8 +51,8 @@ ENV TZ=Etc/UTC
 USER root
 
 RUN apt-get update && apt-get --no-install-recommends -y install \
-        libc-bin libc6 libgpiod2 libyaml-cpp0.7 libi2c0 libuv1 libusb-1.0-0-dev \
+        libc-bin libc6 libgpiod3 libyaml-cpp0.8 libi2c0 libuv1t64 libusb-1.0-0-dev \
-        liborcania2.3 libulfius2.7 libssl3 \
+        liborcania2.3 libulfius2.7t64 libssl3t64 \
         libx11-6 libinput10 libxkbcommon-x11-0 \
     && apt-get clean && rm -rf /var/lib/apt/lists/* \
     && mkdir -p /var/lib/meshtasticd \

arch/esp32/esp32.ini

@@ -54,8 +54,8 @@ lib_deps =
   h2zero/NimBLE-Arduino@^1.4.3
   # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
   https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
-  # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
+  # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
-  lewisxhe/XPowersLib@0.3.0
+  https://github.com/lewisxhe/XPowersLib/archive/v0.3.0.zip
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto

arch/nrf52/nrf52.ini

@@ -23,7 +23,7 @@ build_flags =
   -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
 
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp> -<serialization/>
 
 lib_deps=
   ${arduino_base.lib_deps}

arch/portduino/portduino.ini

@@ -2,7 +2,7 @@
 [portduino_base]
 platform =
   # renovate: datasource=git-refs depName=platform-native packageName=https://github.com/meshtastic/platform-native gitBranch=develop
-  https://github.com/meshtastic/platform-native/archive/681ee029207e9fd040afa223df6e54074cbbe084.zip
+  https://github.com/meshtastic/platform-native/archive/cd32f4ed20812d1fe9c8f74c0b6e80dc93dfce54.zip
 framework = arduino
 
 build_src_filter = 
@@ -17,7 +17,6 @@ build_src_filter =
   +<mesh/raspihttp/>
   -<mesh/eth/>
   -<modules/esp32>
-  +<../variants/portduino>
 
 lib_deps =
   ${env.lib_deps}
@@ -30,14 +29,17 @@ lib_deps =
   lovyan03/LovyanGFX@^1.2.0
   # renovate: datasource=git-refs depName=libch341-spi-userspace packageName=https://github.com/pine64/libch341-spi-userspace gitBranch=main
   https://github.com/pine64/libch341-spi-userspace/archive/af9bc27c9c30fa90772279925b7c5913dff789b4.zip
+  # renovate: datasource=custom.pio depName=adafruit/Adafruit seesaw Library packageName=adafruit/library/Adafruit seesaw Library
+	adafruit/Adafruit seesaw Library@1.7.9
 
 build_flags =
   ${arduino_base.build_flags}
+  -D ARCH_PORTDUINO
   -fPIC
   -Isrc/platform/portduino
   -DRADIOLIB_EEPROM_UNSUPPORTED
   -DPORTDUINO_LINUX_HARDWARE
-  -DHAS_UDP_MULTICAST
+  -DHAS_UDP_MULTICAST=1
   -lpthread
   -lstdc++fs
   -lbluetooth
@@ -48,4 +50,7 @@ build_flags =
   -std=gnu17
   -std=c++17
 
-lib_ignore = Adafruit NeoPixel
+lib_ignore =
+  Adafruit NeoPixel
+  Adafruit ST7735 and ST7789 Library
+  SD

arch/stm32/stm32.ini

@@ -2,7 +2,7 @@
 extends = arduino_base
 platform =
   # renovate: datasource=custom.pio depName=platformio/ststm32 packageName=platformio/platform/ststm32
-  platformio/ststm32@19.2.0
+  platformio/ststm32@19.3.0
 platform_packages =
   # TODO renovate
   platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32/archive/2.10.1.zip
@@ -23,14 +23,20 @@ build_flags =
   -DMESHTASTIC_EXCLUDE_SCREEN=1
   -DMESHTASTIC_EXCLUDE_MQTT=1
   -DMESHTASTIC_EXCLUDE_BLUETOOTH=1
-  -DMESHTASTIC_EXCLUDE_GPS=1
   -DMESHTASTIC_EXCLUDE_WIFI=1
   -DMESHTASTIC_EXCLUDE_TZ=1 ; Exclude TZ to save some flash space.
+  -DSERIAL_RX_BUFFER_SIZE=256 ; For GPS - the default of 64 is too small.
+  -DHAS_SCREEN=0 ; Always disable screen for STM32, it is not supported.
   -DPIO_FRAMEWORK_ARDUINO_NANOLIB_FLOAT_PRINTF ; This is REQUIRED for at least traceroute debug prints - without it the length ends up uninitialized.
-  ;-DDEBUG_MUTE
+  -DDEBUG_MUTE ; You can #undef DEBUG_MUTE in certain source files if you need the logs.
   -fmerge-all-constants
   -ffunction-sections
   -fdata-sections
+  -DRADIOLIB_EXCLUDE_SX128X=1
+  -DRADIOLIB_EXCLUDE_SX127X=1
+  -DRADIOLIB_EXCLUDE_LR11X0=1
+  -DHAL_DAC_MODULE_ONLY
+  -DHAL_RNG_MODULE_ENABLED
 
 build_src_filter =
   ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp>
@@ -47,4 +53,4 @@ lib_deps =
   https://github.com/caveman99/Crypto/archive/eae9c768054118a9399690f8af202853d1ae8516.zip
 
 lib_ignore =
-  mathertel/OneButton@2.6.1
+  OneButton

bin/build-esp32.sh

@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update -e $1
+platformio pkg install -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*

bin/build-firmware.sh

@@ -11,7 +11,7 @@ elif (echo $2 | grep -q "nrf52"); then
 elif (echo $2 | grep -q "stm32"); then
   bin/build-stm32.sh $1
 elif (echo $2 | grep -q "rpi2040"); then
-  bin/build-rpi2040.sh $1
+  bin/build-rp2xx0.sh $1
 else
   echo "Unknown target $2"
   exit 1

bin/build-native.sh

@@ -25,7 +25,7 @@ mkdir -p $OUTDIR/
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-pio pkg update --environment "$PIO_ENV" || platformioFailed
+pio pkg install --environment "$PIO_ENV" || platformioFailed
 pio run --environment "$PIO_ENV" || platformioFailed
 cp ".pio/build/$PIO_ENV/program" "$OUTDIR/meshtasticd_linux_$(uname -m)"
 cp bin/native-install.* $OUTDIR

bin/build-nrf52.sh

@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update -e $1
+platformio pkg install -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*

bin/build-rp2xx0.sh

@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update -e $1
+platformio pkg install -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*

bin/build-stm32wl.sh

@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update -e $1
+platformio pkg install -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*

bin/config-dist.yaml

@@ -199,6 +199,10 @@ HostMetrics:
 #  UserStringCommand: cat /sys/firmware/devicetree/base/serial-number # Command to execute, to send the results as the userString
 
 
+Config:
+#  DisplayMode: TWOCOLOR # uncomment to force BaseUI
+#  DisplayMode: COLOR # uncomment to force MUI
+
 General:
   MaxNodes: 200
   MaxMessageQueue: 100

bin/config.d/lora-ws-raspberry-pico-to-orangepi-03.yaml

@@ -0,0 +1,52 @@
+# https://www.waveshare.com/pico-lora-sx1262-868m.htm
+# http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-3.html
+#
+# See Orange Pi Zero3 manual, chapter 3.16, page 124 for 26-pin header pinout
+#
+# Pin Connection
+# Waveshare       Orange Pi Zero3
+#   36    3.3V        17
+#   15    MOSI        19
+#   16    MISO        21  
+#   14    CLK         23
+#   38    GND         25
+#   4     BUSY        18
+#   20    RESET       22
+#   5     CS          24
+#   26    DIO1/IRQ    26
+
+Lora:
+  Module: sx1262  # Waveshare Raspberry Pico Lora module
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  # Specify either the spidev1_1 or the CS below, not both!
+  # On DietPi Linux, when using the user overlay dietpi-spi1_1.dtbo, CS will be configured with spidev1.1
+  spidev: spidev1.1 # See Orange Pi Zero3 manual, chapter 3.18.3, page 130
+#  CS:             # CS     PIN_24 -> chip 1, line 233
+#    pin: 24
+#    gpiochip: 1
+#    line: 233
+  SCK:            # SCK     PIN_23 -> chip 1, line 230
+    pin: 23
+    gpiochip: 1
+    line: 230
+  Busy:           # BUSY    PIN_18 -> chip 1, line 78
+    pin: 18
+    gpiochip: 1
+    line: 78
+  MOSI:           # MOSI    PIN_19 -> chip 1, line 231
+    pin: 19
+    gpiochip: 1
+    line: 231
+  MISO:           # MISO    PIN_21 -> chip 1, line 232
+    pin: 21
+    gpiochip: 1
+    line: 232
+  Reset:          # NRST    PIN_22 -> chip 1, line 71
+    pin: 22
+    gpiochip: 1
+    line: 71
+  IRQ:            # DIO1    PIN_26 -> chip 1, line 74
+    pin: 26
+    gpiochip: 1
+    line: 74

bin/device-install.sh

@@ -7,12 +7,7 @@ MCU=""
 
 # Variant groups
 BIGDB_8MB=(
-	# Check if FILENAME contains "-tft-" and set target partitionScheme accordingly.
+	"picomputer-s3"
-if [[ $FILENAME == *"-tft-"* ]]; then
-    TFT_BUILD=true
-fi
-
-# Extract BASENAME from %FILENAME% for later use.r-s3"
 	"unphone"
 	"seeed-sensecap-indicator"
 	"crowpanel-esp32s3"

bin/device-update.sh

@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/bin/bash
 
 PYTHON=${PYTHON:-$(which python3 python|head -n 1)}
 CHANGE_MODE=false
@@ -31,17 +31,16 @@ EOF
 }
 
 # Check for --change-mode and remove it from arguments
-NEW_ARGS=""
+NEW_ARGS=()
 for arg in "$@"; do
     if [ "$arg" = "--change-mode" ]; then
         CHANGE_MODE=true
     else
-        NEW_ARGS="$NEW_ARGS \"\$arg\""
+        NEW_ARGS+=("$arg")
     fi
 done
 
-# Reset positional parameters to filtered list
+set -- "${NEW_ARGS[@]}"
-eval set -- $NEW_ARGS
 
 while getopts ":hp:P:f:" opt; do
     case "${opt}" in

bin/generate_ci_matrix.py

@@ -2,50 +2,71 @@
 
 """Generate the CI matrix."""
 
-import configparser
 import json
-import os
 import sys
 import random
-
+import re
-rootdir = "variants/"
+from platformio.project.config import ProjectConfig
 
 options = sys.argv[1:]
 
 outlist = []
 
 if len(options) < 1:
-    print(json.dumps(outlist))
+  print(json.dumps(outlist))
-    exit()
+  exit(1)
 
-for subdir, dirs, files in os.walk(rootdir):
+cfg = ProjectConfig.get_instance()
-    for file in files:
+pio_envs = cfg.envs()
-        if file == "platformio.ini":
+
-            config = configparser.ConfigParser()
+# Gather all PlatformIO environments for filtering later
-            config.read(subdir + "/" + file)
+all_envs = []
-            for c in config.sections():
+for pio_env in pio_envs:
-                if c.startswith("env:"):
+  env_build_flags = cfg.get(f"env:{pio_env}", 'build_flags')
-                    section = config[c].name[4:]
+  env_platform = None
-                    if "extends" in config[config[c].name]:
+  for flag in env_build_flags:
-                        if options[0] + "_base" in config[config[c].name]["extends"]:
+    # Extract the platform from the build flags
-                            if "board_level" in config[config[c].name]:
+    # Example flag: -I variants/esp32s3/heltec-v3
-                                if (
+    match = re.search(r"-I\s?variants/([^/]+)", flag)
-                                    config[config[c].name]["board_level"] == "extra"
+    if match:
-                                ) & ("extra" in options):
+      env_platform = match.group(1)
-                                    outlist.append(section)
+      break
-                            else:
+  # Intentionally fail if platform cannot be determined
-                                outlist.append(section)
+  if not env_platform:
-                        # Add the TFT variants if the base variant is selected
+    print(f"Error: Could not determine platform for environment '{pio_env}'")
-                        elif section.replace("-tft", "") in outlist and config[config[c].name].get("board_level") != "extra":
+    exit(1)
-                            outlist.append(section)
+  # Store env details as a dictionary, and add to 'all_envs' list
-                        elif section.replace("-inkhud", "") in outlist and config[config[c].name].get("board_level") != "extra":
+  env = {
-                            outlist.append(section)
+    'name': pio_env,
-                    if "board_check" in config[config[c].name]:
+    'platform': env_platform,
-                        if (config[config[c].name]["board_check"] == "true") & (
+    'board_level': cfg.get(f"env:{pio_env}", 'board_level', default=None),
-                            "check" in options
+    'board_check': bool(cfg.get(f"env:{pio_env}", 'board_check', default=False))
-                        ):
+  }
-                            outlist.append(section)
+  all_envs.append(env)
-if ("quick" in options) & (len(outlist) > 3):
+
-    print(json.dumps(random.sample(outlist, 3)))
+# Filter outputs based on options
+# Check is mutually exclusive with other options (except 'pr')
+if "check" in options:
+  for env in all_envs:
+    if env['board_check']:
+      if "pr" in options:
+        if env['board_level'] == 'pr':
+          outlist.append(env['name'])
+      else:
+        outlist.append(env['name'])
+# Filter (non-check) builds by platform
 else:
-    print(json.dumps(outlist))
+  for env in all_envs:
+    if options[0] == env['platform']:
+      # Always include board_level = 'pr'
+      if env['board_level'] == 'pr':
+        outlist.append(env['name'])
+      # Include board_level = 'extra' when requested
+      elif "extra" in options and env['board_level'] == "extra":
+        outlist.append(env['name'])
+      # If no board level is specified, include in release builds (not PR)
+      elif "pr" not in options and not env['board_level']:
+        outlist.append(env['name'])
+
+# Return as a JSON list
+print(json.dumps(outlist))

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,6 +87,18 @@
   </screenshots>
 
   <releases>
+    <release version="2.7.6" date="2025-08-12">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.6</url>
+    </release>
+    <release version="2.7.5" date="2025-08-09">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.5</url>
+    </release>
+    <release version="2.7.4" date="2025-07-19">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.4</url>
+    </release>
+    <release version="2.7.3" date="2025-07-10">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.3</url>
+    </release>
     <release version="2.7.2" date="2025-07-04">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.2</url>
     </release>

bin/platformio-custom.py

@@ -3,6 +3,7 @@
 # trunk-ignore-all(flake8/F821): For SConstruct imports
 import sys
 from os.path import join
+import subprocess
 import json
 import re
 
@@ -92,6 +93,17 @@ prefsLoc = projenv["PROJECT_DIR"] + "/version.properties"
 verObj = readProps(prefsLoc)
 print("Using meshtastic platformio-custom.py, firmware version " + verObj["long"] + " on " + env.get("PIOENV"))
 
+# get repository owner if git is installed
+try:
+    r_owner = (
+        subprocess.check_output(["git", "config", "--get", "remote.origin.url"])
+        .decode("utf-8")
+        .strip().split("/")
+    )
+    repo_owner = r_owner[-2] + "/" + r_owner[-1].replace(".git", "")
+except subprocess.CalledProcessError:
+    repo_owner = "unknown"
+
 jsonLoc = env["PROJECT_DIR"] + "/userPrefs.jsonc"
 with open(jsonLoc) as f:
     jsonStr = re.sub("//.*","", f.read(), flags=re.MULTILINE)
@@ -117,6 +129,7 @@ flags = [
         "-DAPP_VERSION=" + verObj["long"],
         "-DAPP_VERSION_SHORT=" + verObj["short"],
         "-DAPP_ENV=" + env.get("PIOENV"),
+        "-DAPP_REPO=" + repo_owner,
     ] + pref_flags
 
 print ("Using flags:")

boards/heltec_mesh_node_t114.json

@@ -10,7 +10,8 @@
     "hwids": [
       ["0x239A", "0x4405"],
       ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"]
+      ["0x239A", "0x002A"],
+      ["0x2886", "0x1667"]
     ],
     "usb_product": "HT-n5262",
     "mcu": "nrf52840",

boards/t-deck-pro.json

@@ -0,0 +1,43 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_qspi",
+      "partitions": "default_16MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "esp32s3"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "LilyGo T-Deck Pro S3 (16M Flash 8M QSPI PSRAM )",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "monitor": {
+    "speed": 115200
+  },
+  "url": "https://lilygo.cc/products/t-deck-pro",
+  "vendor": "LilyGo"
+}

debian/changelog

@@ -1,4 +1,4 @@
-meshtasticd (2.7.2.0) UNRELEASED; urgency=medium
+meshtasticd (2.7.6.0) UNRELEASED; urgency=medium
 
   [ Austin Lane ]
   * Initial packaging
@@ -28,4 +28,16 @@ meshtasticd (2.7.2.0) UNRELEASED; urgency=medium
   [  ]
   * GitHub Actions Automatic version bump
 
- --  <github-actions[bot]@users.noreply.github.com>  Fri, 04 Jul 2025 11:58:01 +0000
+  [ Ubuntu ]
+  * GitHub Actions Automatic version bump
+
+  [  ]
+  * GitHub Actions Automatic version bump
+
+  [  ]
+  * GitHub Actions Automatic version bump
+
+  [  ]
+  * GitHub Actions Automatic version bump
+
+ --  <github-actions[bot]@users.noreply.github.com>  Tue, 12 Aug 2025 23:48:48 +0000

debian/meshtasticd.postinst

@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/bin/bash
 # postinst script for meshtasticd
 #
 # see: dh_installdeb(1)

debian/meshtasticd.postrm

@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/bin/bash
 # postrm script for meshtasticd
 #
 # see: dh_installdeb(1)

platformio.ini

@@ -6,7 +6,8 @@ default_envs = tbeam
 
 extra_configs =
 	arch/*/*.ini
-	variants/*/platformio.ini
+	variants/*/*/platformio.ini
+	variants/*/diy/*/platformio.ini
 	src/graphics/niche/InkHUD/PlatformioConfig.ini
 
 description = Meshtastic
@@ -60,8 +61,8 @@ monitor_filters = direct
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-esp8266-oled-ssd1306 packageName=https://github.com/meshtastic/esp8266-oled-ssd1306 gitBranch=master
 	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/0119501e9983bd894830b02f545c377ee08d66fe.zip
-	# renovate: datasource=custom.pio depName=OneButton packageName=mathertel/library/OneButton
+	# renovate: datasource=git-refs depName=meshtastic-OneButton packageName=https://github.com/meshtastic/OneButton gitBranch=master
-	mathertel/OneButton@2.6.1
+	https://github.com/meshtastic/OneButton/archive/fa352d668c53f290cfa480a5f79ad422cd828c70.zip
 	# renovate: datasource=git-refs depName=meshtastic-arduino-fsm packageName=https://github.com/meshtastic/arduino-fsm gitBranch=master
 	https://github.com/meshtastic/arduino-fsm/archive/7db3702bf0cfe97b783d6c72595e3f38e0b19159.zip
 	# renovate: datasource=git-refs depName=meshtastic-TinyGPSPlus packageName=https://github.com/meshtastic/TinyGPSPlus gitBranch=master
@@ -101,21 +102,29 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Syslog packageName=arcao/library/Syslog
 	arcao/Syslog@2.0.0
 
+; Minimal networking libs for nrf52 (excludes Syslog to save flash)
+[nrf52_networking_base]
+lib_deps =
+	# renovate: datasource=custom.pio depName=TBPubSubClient packageName=thingsboard/library/TBPubSubClient
+	thingsboard/TBPubSubClient@2.12.1
+	# renovate: datasource=custom.pio depName=NTPClient packageName=arduino-libraries/library/NTPClient
+	arduino-libraries/NTPClient@3.2.1
+
 [radiolib_base]
 lib_deps =
 	# renovate: datasource=custom.pio depName=RadioLib packageName=jgromes/library/RadioLib
-	jgromes/RadioLib@7.2.0
+	jgromes/RadioLib@7.2.1
 
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/8c7092c73425adfda1aac8c6960df06cd85f6d92.zip
+	https://github.com/meshtastic/device-ui/archive/0cd108ff783539e41ef38258ba2784ab3b1bdc97.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
 lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit BusIO packageName=adafruit/library/Adafruit BusIO
-	adafruit/Adafruit BusIO@1.17.1
+	adafruit/Adafruit BusIO@1.17.2
 	# renovate: datasource=custom.pio depName=Adafruit Unified Sensor packageName=adafruit/library/Adafruit Unified Sensor
 	adafruit/Adafruit Unified Sensor@1.1.15
 	# renovate: datasource=custom.pio depName=Adafruit BMP280 packageName=adafruit/library/Adafruit BMP280 Library
@@ -129,7 +138,7 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit MCP9808 packageName=adafruit/library/Adafruit MCP9808 Library
 	adafruit/Adafruit MCP9808 Library@2.0.2
 	# renovate: datasource=custom.pio depName=Adafruit INA260 packageName=adafruit/library/Adafruit INA260 Library
-	adafruit/Adafruit INA260 Library@1.5.2
+	adafruit/Adafruit INA260 Library@1.5.3
 	# renovate: datasource=custom.pio depName=Adafruit INA219 packageName=adafruit/library/Adafruit INA219
 	adafruit/Adafruit INA219@1.2.3
 	# renovate: datasource=custom.pio depName=Adafruit PM25 AQI Sensor packageName=adafruit/library/Adafruit PM25 AQI Sensor
@@ -177,7 +186,7 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit MAX1704X packageName=adafruit/library/Adafruit MAX1704X
 	adafruit/Adafruit MAX1704X@1.0.3
 	# renovate: datasource=custom.pio depName=Adafruit SHTC3 packageName=adafruit/library/Adafruit SHTC3 Library
-	adafruit/Adafruit SHTC3 Library@1.0.1
+	adafruit/Adafruit SHTC3 Library@1.0.2
 	# renovate: datasource=custom.pio depName=Adafruit LPS2X packageName=adafruit/library/Adafruit LPS2X
 	adafruit/Adafruit LPS2X@2.0.6
 	# renovate: datasource=custom.pio depName=Adafruit SHT31 packageName=adafruit/library/Adafruit SHT31 Library

src/BluetoothStatus.h

@@ -89,14 +89,22 @@ class BluetoothStatus : public Status
             case ConnectionState::CONNECTED:
                 LOG_DEBUG("BluetoothStatus CONNECTED");
 #ifdef BLE_LED
+#ifdef BLE_LED_INVERTED
+                digitalWrite(BLE_LED, LOW);
+#else
                 digitalWrite(BLE_LED, HIGH);
+#endif
 #endif
                 break;
 
             case ConnectionState::DISCONNECTED:
                 LOG_DEBUG("BluetoothStatus DISCONNECTED");
 #ifdef BLE_LED
+#ifdef BLE_LED_INVERTED
+                digitalWrite(BLE_LED, HIGH);
+#else
                 digitalWrite(BLE_LED, LOW);
+#endif
 #endif
                 break;
             }

src/Power.cpp

@@ -20,6 +20,11 @@
 #include "meshUtils.h"
 #include "sleep.h"
 
+#if defined(ARCH_PORTDUINO)
+#include "api/WiFiServerAPI.h"
+#include "input/LinuxInputImpl.h"
+#endif
+
 // Working USB detection for powered/charging states on the RAK platform
 #ifdef NRF_APM
 #include "nrfx_power.h"
@@ -120,6 +125,15 @@ NullSensor max17048Sensor;
 RAK9154Sensor rak9154Sensor;
 #endif
 
+#ifdef HAS_PPM
+// note: XPOWERS_CHIP_XXX must be defined in variant.h
+#include <XPowersLib.h>
+#endif
+
+#ifdef HAS_BQ27220
+#include "bq27220.h"
+#endif
+
 #ifdef HAS_PMU
 XPowersLibInterface *PMU = NULL;
 #else
@@ -665,6 +679,8 @@ bool Power::setup()
         found = true;
     } else if (lipoInit()) {
         found = true;
+    } else if (lipoChargerInit()) {
+        found = true;
     } else if (analogInit()) {
         found = true;
     }
@@ -679,9 +695,61 @@ bool Power::setup()
     return found;
 }
 
+void Power::powerCommandsCheck()
+{
+    if (rebootAtMsec && millis() > rebootAtMsec) {
+        LOG_INFO("Rebooting");
+        reboot();
+    }
+
+    if (shutdownAtMsec && millis() > shutdownAtMsec) {
+        shutdownAtMsec = 0;
+        shutdown();
+    }
+}
+
+void Power::reboot()
+{
+    notifyReboot.notifyObservers(NULL);
+#if defined(ARCH_ESP32)
+    ESP.restart();
+#elif defined(ARCH_NRF52)
+    NVIC_SystemReset();
+#elif defined(ARCH_RP2040)
+    rp2040.reboot();
+#elif defined(ARCH_PORTDUINO)
+    deInitApiServer();
+    if (aLinuxInputImpl)
+        aLinuxInputImpl->deInit();
+    SPI.end();
+    Wire.end();
+    Serial1.end();
+    if (screen) {
+        delete screen;
+        screen = nullptr;
+    }
+    LOG_DEBUG("final reboot!");
+    ::reboot();
+#elif defined(ARCH_STM32WL)
+    HAL_NVIC_SystemReset();
+#else
+    rebootAtMsec = -1;
+    LOG_WARN("FIXME implement reboot for this platform. Note that some settings require a restart to be applied");
+#endif
+}
+
 void Power::shutdown()
 {
-    LOG_INFO("Shutting Down");
+
+#if HAS_SCREEN
+    if (screen) {
+        screen->showSimpleBanner("Shutting Down...", 0); // stays on screen
+    }
+#endif
+#if !defined(ARCH_STM32WL)
+    playShutdownMelody();
+#endif
+    nodeDB->saveToDisk();
 
 #if defined(ARCH_NRF52) || defined(ARCH_ESP32) || defined(ARCH_RP2040)
 #ifdef PIN_LED1
@@ -693,7 +761,11 @@ void Power::shutdown()
 #ifdef PIN_LED3
     ledOff(PIN_LED3);
 #endif
-    doDeepSleep(DELAY_FOREVER, false, false);
+    doDeepSleep(DELAY_FOREVER, false, true);
+#elif defined(ARCH_PORTDUINO)
+    exit(EXIT_SUCCESS);
+#else
+    LOG_WARN("FIXME implement shutdown for this platform");
 #endif
 }
 
@@ -1237,3 +1309,144 @@ bool Power::lipoInit()
     return false;
 }
 #endif
+
+#if defined(HAS_PPM) && HAS_PPM
+
+/**
+ * Adapter class for BQ25896/BQ27220 Lipo battery charger.
+ */
+class LipoCharger : public HasBatteryLevel
+{
+  private:
+    XPowersPPM *ppm = nullptr;
+    BQ27220 *bq = nullptr;
+
+  public:
+    /**
+     * Init the I2C BQ25896 Lipo battery charger
+     */
+    bool runOnce()
+    {
+        if (ppm == nullptr) {
+            ppm = new XPowersPPM;
+            bool result = ppm->init(Wire, I2C_SDA, I2C_SCL, BQ25896_ADDR);
+            if (result) {
+                LOG_INFO("PPM BQ25896 init succeeded");
+                // Set the minimum operating voltage. Below this voltage, the PPM will protect
+                // ppm->setSysPowerDownVoltage(3100);
+
+                // Set input current limit, default is 500mA
+                // ppm->setInputCurrentLimit(800);
+
+                // Disable current limit pin
+                // ppm->disableCurrentLimitPin();
+
+                // Set the charging target voltage, Range:3840 ~ 4608mV ,step:16 mV
+                ppm->setChargeTargetVoltage(4288);
+
+                // Set the precharge current , Range: 64mA ~ 1024mA ,step:64mA
+                // ppm->setPrechargeCurr(64);
+
+                // The premise is that limit pin is disabled, or it will
+                // only follow the maximum charging current set by limit pin.
+                // Set the charging current , Range:0~5056mA ,step:64mA
+                ppm->setChargerConstantCurr(1024);
+
+                // To obtain voltage data, the ADC must be enabled first
+                ppm->enableMeasure();
+
+                // Turn on charging function
+                // If there is no battery connected, do not turn on the charging function
+                ppm->enableCharge();
+            } else {
+                LOG_WARN("PPM BQ25896 init failed");
+                delete ppm;
+                ppm = nullptr;
+                return false;
+            }
+        }
+        if (bq == nullptr) {
+            bq = new BQ27220;
+            bq->setDefaultCapacity(BQ27220_DESIGN_CAPACITY);
+
+            bool result = bq->init();
+            if (result) {
+                LOG_DEBUG("BQ27220 design capacity: %d", bq->getDesignCapacity());
+                LOG_DEBUG("BQ27220 fullCharge capacity: %d", bq->getFullChargeCapacity());
+                LOG_DEBUG("BQ27220 remaining capacity: %d", bq->getRemainingCapacity());
+                return true;
+            } else {
+                LOG_WARN("BQ27220 init failed");
+                delete bq;
+                bq = nullptr;
+                return false;
+            }
+        }
+        return false;
+    }
+
+    /**
+     * Battery state of charge, from 0 to 100 or -1 for unknown
+     */
+    virtual int getBatteryPercent() override
+    {
+        return -1;
+        // return bq->getChargePercent(); // don't use BQ27220 for battery percent, it is not calibrated
+    }
+
+    /**
+     * The raw voltage of the battery in millivolts, or NAN if unknown
+     */
+    virtual uint16_t getBattVoltage() override { return bq->getVoltage(); }
+
+    /**
+     * return true if there is a battery installed in this unit
+     */
+    virtual bool isBatteryConnect() override { return ppm->getBattVoltage() > 0; }
+
+    /**
+     * return true if there is an external power source detected
+     */
+    virtual bool isVbusIn() override { return ppm->getVbusVoltage() > 0; }
+
+    /**
+     * return true if the battery is currently charging
+     */
+    virtual bool isCharging() override
+    {
+        bool isCharging = ppm->isCharging();
+        if (isCharging) {
+            LOG_DEBUG("BQ27220 time to full charge: %d min", bq->getTimeToFull());
+        } else {
+            if (!ppm->isVbusIn()) {
+                LOG_DEBUG("BQ27220 time to empty: %d min (%d mAh)", bq->getTimeToEmpty(), bq->getRemainingCapacity());
+            }
+        }
+        return isCharging;
+    }
+};
+
+LipoCharger lipoCharger;
+
+/**
+ * Init the Lipo battery charger
+ */
+bool Power::lipoChargerInit()
+{
+    bool result = lipoCharger.runOnce();
+    LOG_DEBUG("Power::lipoChargerInit lipo sensor is %s", result ? "ready" : "not ready yet");
+    if (!result)
+        return false;
+    batteryLevel = &lipoCharger;
+    return true;
+}
+
+#else
+/**
+ * The Lipo battery level sensor is unavailable - default to AnalogBatteryLevel
+ */
+bool Power::lipoChargerInit()
+{
+    return false;
+}
+#endif

src/PowerFSM.cpp

@@ -72,7 +72,7 @@ extern Power *power;
 static void shutdownEnter()
 {
     LOG_DEBUG("State: SHUTDOWN");
-    power->shutdown();
+    shutdownAtMsec = millis();
 }
 
 #include "error.h"

src/buzz/BuzzerFeedbackThread.cpp

@@ -47,10 +47,6 @@ int BuzzerFeedbackThread::handleInputEvent(const InputEvent *event)
         playComboTune(); // Ping sent feedback
         break;
 
-    case INPUT_BROKER_SHUTDOWN:
-        playShutdownMelody(); // Shutdown feedback
-        break;
-
     default:
         // For other events, check if it's a printable character
         if (event->kbchar >= 32 && event->kbchar <= 126) {
@@ -69,10 +65,7 @@ int32_t BuzzerFeedbackThread::runOnce()
     // This thread is primarily event-driven, but we can use runOnce
     // for any periodic tasks if needed in the future
 
-    if (needsUpdate) {
+    needsUpdate = false;
-        needsUpdate = false;
-        // Could add any periodic processing here
-    }
 
     // Run every 100ms when active, less frequently when idle
     return needsUpdate ? 100 : 1000;

src/buzz/buzz.cpp

@@ -140,6 +140,10 @@ bool playNextLeadUpNote()
     playTones(&note, 1); // Play single note using existing playTones function
 
     leadUpNoteIndex++;
+
+    if (leadUpNoteIndex >= leadUpNotesCount) {
+        return false; // this was the final note
+    }
     return true; // Note was played (playTones handles buzzer availability internally)
 }
 

src/configuration.h

@@ -150,11 +150,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // Define if screen should be mirrored left to right
 // #define SCREEN_MIRROR
 
-// I2C Keyboards (M5Stack, RAK14004, T-Deck)
+// I2C Keyboards (M5Stack, RAK14004, T-Deck, T-Deck Pro, T-Lora Pager, CardKB, BBQ10, MPR121, TCA8418)
 #define CARDKB_ADDR 0x5F
 #define TDECK_KB_ADDR 0x55
 #define BBQ10_KB_ADDR 0x1F
 #define MPR121_KB_ADDR 0x5A
+#define TCA8418_KB_ADDR 0x34
 
 // -----------------------------------------------------------------------------
 // SENSOR
@@ -193,8 +194,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MLX90614_ADDR_DEF 0x5A
 #define CGRADSENS_ADDR 0x66
 #define LTR390UV_ADDR 0x53
-#define XPOWERS_AXP192_AXP2101_ADDRESS 0x34 // same adress as TCA8418
+#define XPOWERS_AXP192_AXP2101_ADDRESS 0x34 // same adress as TCA8418_KB
 #define PCT2075_ADDR 0x37
+#define BQ27220_ADDR 0x55 // same address as TDECK_KB
+#define BQ25896_ADDR 0x6B
+#define LTR553ALS_ADDR 0x23
 
 // -----------------------------------------------------------------------------
 // ACCELEROMETER
@@ -208,6 +212,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BMX160_ADDR 0x69
 #define ICM20948_ADDR 0x69
 #define ICM20948_ADDR_ALT 0x68
+#define BHI260AP_ADDR 0x28
 #define BMM150_ADDR 0x13
 
 // -----------------------------------------------------------------------------
@@ -230,6 +235,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // Touchscreen
 // -----------------------------------------------------------------------------
 #define FT6336U_ADDR 0x48
+#define CST328_ADDR 0x1A
 
 // -----------------------------------------------------------------------------
 // RAK12035VB Soil Monitor (using RAK12023 up to 3 RAK12035 monitors can be connected)

src/detect/ScanI2C.h

@@ -74,7 +74,12 @@ class ScanI2C
         RAK12035,
         TCA8418KB,
         PCT2075,
-        BMM150,
+        CST328,
+        BQ25896,
+        BQ27220,
+        LTR553ALS,
+        BHI260AP,
+        BMM150
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;

src/detect/ScanI2CTwoWire.cpp

@@ -184,8 +184,13 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 type = RTC_RV3028;
                 logFoundDevice("RV3028", (uint8_t)addr.address);
                 rtc.initI2C(*i2cBus);
-                rtc.writeToRegister(0x35, 0x07); // no Clkout
+                // Update RTC EEPROM settings, if necessary
-                rtc.writeToRegister(0x37, 0xB4);
+                if (rtc.readEEPROMRegister(0x35) != 0x07) {
+                    rtc.writeEEPROMRegister(0x35, 0x07); // no Clkout
+                }
+                if (rtc.readEEPROMRegister(0x37) != 0xB4) {
+                    rtc.writeEEPROMRegister(0x37, 0xB4);
+                }
                 break;
 #endif
 
@@ -206,7 +211,17 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 }
                 break;
 
-                SCAN_SIMPLE_CASE(TDECK_KB_ADDR, TDECKKB, "T-Deck keyboard", (uint8_t)addr.address);
+            case TDECK_KB_ADDR:
+                // Do we have the T-Deck keyboard or the T-Deck Pro battery sensor?
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x04), 1);
+                if (registerValue != 0) {
+                    logFoundDevice("BQ27220", (uint8_t)addr.address);
+                    type = BQ27220;
+                } else {
+                    logFoundDevice("TDECKKB", (uint8_t)addr.address);
+                    type = TDECKKB;
+                }
+                break;
                 SCAN_SIMPLE_CASE(BBQ10_KB_ADDR, BBQ10KB, "BB Q10", (uint8_t)addr.address);
 
                 SCAN_SIMPLE_CASE(ST7567_ADDRESS, SCREEN_ST7567, "ST7567", (uint8_t)addr.address);
@@ -396,6 +411,12 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                     logFoundDevice("BQ24295", (uint8_t)addr.address);
                     break;
                 }
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x14), 1); // get ID
+                if ((registerValue & 0b00000011) == 0b00000010) {
+                    type = BQ25896;
+                    logFoundDevice("BQ25896", (uint8_t)addr.address);
+                    break;
+                }
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0F), 1); // get ID
                 if (registerValue == 0x6A) {
                     type = LSM6DS3;
@@ -447,6 +468,9 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 SCAN_SIMPLE_CASE(DFROBOT_RAIN_ADDR, DFROBOT_RAIN, "DFRobot Rain Gauge", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(LTR390UV_ADDR, LTR390UV, "LTR390UV", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(PCT2075_ADDR, PCT2075, "PCT2075", (uint8_t)addr.address);
+                SCAN_SIMPLE_CASE(CST328_ADDR, CST328, "CST328", (uint8_t)addr.address);
+                SCAN_SIMPLE_CASE(LTR553ALS_ADDR, LTR553ALS, "LTR553ALS", (uint8_t)addr.address);
+                SCAN_SIMPLE_CASE(BHI260AP_ADDR, BHI260AP, "BHI260AP", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(SCD4X_ADDR, SCD4X, "SCD4X", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(BMM150_ADDR, BMM150, "BMM150", (uint8_t)addr.address);
 #ifdef HAS_TPS65233

src/gps/GPS.cpp

@@ -39,9 +39,9 @@ template <typename T, std::size_t N> std::size_t array_count(const T (&)[N])
     return N;
 }
 
-#if defined(NRF52840_XXAA) || defined(NRF52833_XXAA) || defined(ARCH_ESP32) || defined(ARCH_PORTDUINO)
+#if defined(NRF52840_XXAA) || defined(NRF52833_XXAA) || defined(ARCH_ESP32) || defined(ARCH_PORTDUINO) || defined(ARCH_STM32WL)
-#if defined(RAK2560)
+#if defined(GPS_SERIAL_PORT)
-HardwareSerial *GPS::_serial_gps = &Serial2;
+HardwareSerial *GPS::_serial_gps = &GPS_SERIAL_PORT;
 #else
 HardwareSerial *GPS::_serial_gps = &Serial1;
 #endif
@@ -643,8 +643,16 @@ bool GPS::setup()
             delay(250);
         } else if (IS_ONE_OF(gnssModel, GNSS_MODEL_AG3335, GNSS_MODEL_AG3352)) {
 
-            _serial_gps->write("$PAIR066,1,0,1,0,0,1*3B\r\n"); // Enable GPS+GALILEO+NAVIC
+            if (config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_IN ||
-
+                config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_NP_865) {
+                _serial_gps->write("$PAIR066,1,0,1,0,0,1*3B\r\n"); // Enable GPS+GALILEO+NAVIC
+                // GPS GLONASS GALILEO BDS QZSS NAVIC
+                //  1    0       1      0   0    1
+            } else {
+                _serial_gps->write("$PAIR066,1,1,1,1,0,0*3A\r\n"); // Enable GPS+GLONASS+GALILEO+BDS
+                // GPS GLONASS GALILEO BDS QZSS NAVIC
+                //  1    1       1      1   0    0
+            }
             // Configure NMEA (sentences will output once per fix)
             _serial_gps->write("$PAIR062,0,1*3F\r\n"); // GGA ON
             _serial_gps->write("$PAIR062,1,0*3F\r\n"); // GLL OFF
@@ -1503,7 +1511,7 @@ bool GPS::lookForTime()
 
 #ifdef GNSS_AIROHA
     uint8_t fix = reader.fixQuality();
-    if (fix > 0) {
+    if (fix >= 1 && fix <= 5) {
         if (lastFixStartMsec > 0) {
             if (Throttle::isWithinTimespanMs(lastFixStartMsec, GPS_FIX_HOLD_TIME)) {
                 return false;
@@ -1536,7 +1544,10 @@ The Unix epoch (or Unix time or POSIX time or Unix timestamp) is the number of s
         if (t.tm_mon > -1) {
             LOG_DEBUG("NMEA GPS time %02d-%02d-%02d %02d:%02d:%02d age %d", d.year(), d.month(), t.tm_mday, t.tm_hour, t.tm_min,
                       t.tm_sec, ti.age());
-            perhapsSetRTC(RTCQualityGPS, t);
+            if (perhapsSetRTC(RTCQualityGPS, t) == RTCSetResultInvalidTime) {
+                // Clear the GPS buffer if we got an invalid time
+                clearBuffer();
+            }
             return true;
         } else
             return false;
@@ -1555,7 +1566,7 @@ bool GPS::lookForLocation()
 #ifdef GNSS_AIROHA
     if ((config.position.gps_update_interval * 1000) >= (GPS_FIX_HOLD_TIME * 2)) {
         uint8_t fix = reader.fixQuality();
-        if (fix > 0) {
+        if (fix >= 1 && fix <= 5) {
             if (lastFixStartMsec > 0) {
                 if (Throttle::isWithinTimespanMs(lastFixStartMsec, GPS_FIX_HOLD_TIME)) {
                     return false;

src/gps/RTC.cpp

@@ -105,7 +105,7 @@ void readFromRTC()
  *
  * If we haven't yet set our RTC this boot, set it from a GPS derived time
  */
-bool perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate)
+RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate)
 {
     static uint32_t lastSetMsec = 0;
     uint32_t now = millis();
@@ -113,7 +113,7 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate)
 #ifdef BUILD_EPOCH
     if (tv->tv_sec < BUILD_EPOCH) {
         LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
-        return false;
+        return RTCSetResultInvalidTime;
     }
 #endif
 
@@ -184,9 +184,9 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate)
         readFromRTC();
 #endif
 
-        return true;
+        return RTCSetResultSuccess;
     } else {
-        return false;
+        return RTCSetResultNotSet; // RTC was already set with a higher quality time
     }
 }
 
@@ -215,7 +215,7 @@ const char *RtcName(RTCQuality quality)
  * @param t The time to potentially set the RTC to.
  * @return True if the RTC was set to the provided time, false otherwise.
  */
-bool perhapsSetRTC(RTCQuality q, struct tm &t)
+RTCSetResult perhapsSetRTC(RTCQuality q, struct tm &t)
 {
     /* Convert to unix time
     The Unix epoch (or Unix time or POSIX time or Unix timestamp) is the number of seconds that have elapsed since January 1, 1970
@@ -226,12 +226,19 @@ bool perhapsSetRTC(RTCQuality q, struct tm &t)
     time_t res = gm_mktime(&t);
     struct timeval tv;
     tv.tv_sec = res;
-    tv.tv_usec = 0; // time.centisecond() * (10 / 1000);
+    tv.tv_usec = 0;                      // time.centisecond() * (10 / 1000);
+    uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
+#ifdef BUILD_EPOCH
+    if (tv.tv_sec < BUILD_EPOCH) {
+        LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
+        return RTCSetResultInvalidTime;
+    }
+#endif
 
     // LOG_DEBUG("Got time from GPS month=%d, year=%d, unixtime=%ld", t.tm_mon, t.tm_year, tv.tv_sec);
     if (t.tm_year < 0 || t.tm_year >= 300) {
         // LOG_DEBUG("Ignore invalid GPS month=%d, year=%d, unixtime=%ld", t.tm_mon, t.tm_year, tv.tv_sec);
-        return false;
+        return RTCSetResultInvalidTime;
     } else {
         return perhapsSetRTC(q, &tv);
     }

src/gps/RTC.h

@@ -22,13 +22,22 @@ enum RTCQuality {
     RTCQualityGPS = 4
 };
 
+/// The RTC set result codes
+/// Used to indicate the result of an attempt to set the RTC.
+enum RTCSetResult {
+    RTCSetResultNotSet = 0,      ///< RTC was set successfully
+    RTCSetResultSuccess = 1,     ///< RTC was set successfully
+    RTCSetResultInvalidTime = 3, ///< The provided time was invalid (e.g., before the build epoch)
+    RTCSetResultError = 4        ///< An error occurred while setting the RTC
+};
+
 RTCQuality getRTCQuality();
 
 extern uint32_t lastSetFromPhoneNtpOrGps;
 
 /// If we haven't yet set our RTC this boot, set it from a GPS derived time
-bool perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate = false);
+RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate = false);
-bool perhapsSetRTC(RTCQuality q, struct tm &t);
+RTCSetResult perhapsSetRTC(RTCQuality q, struct tm &t);
 
 /// Return a string name for the quality
 const char *RtcName(RTCQuality quality);

src/graphics/EInkDisplay2.cpp

@@ -6,6 +6,10 @@
 #include "main.h"
 #include <SPI.h>
 
+#ifdef GXEPD2_DRIVER_0
+#include "einkDetect.h"
+#endif
+
 /*
     The macros EINK_DISPLAY_MODEL, EINK_WIDTH, and EINK_HEIGHT are defined as build_flags in a variant's platformio.ini
     Previously, these macros were defined at the top of this file.
@@ -136,17 +140,32 @@ bool EInkDisplay::connect()
 #endif
 #endif
 
-#if defined(TTGO_T_ECHO) || defined(ELECROW_ThinkNode_M1)
+#if defined(TTGO_T_ECHO) || defined(ELECROW_ThinkNode_M1) || defined(T_ECHO_LITE)
     {
         auto lowLevel = new EINK_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY, SPI1);
 
         adafruitDisplay = new GxEPD2_BW<EINK_DISPLAY_MODEL, EINK_DISPLAY_MODEL::HEIGHT>(*lowLevel);
         adafruitDisplay->init();
-#ifdef ELECROW_ThinkNode_M1
+#if defined(ELECROW_ThinkNode_M1) || defined(T_ECHO_LITE)
         adafruitDisplay->setRotation(4);
 #else
         adafruitDisplay->setRotation(3);
 #endif
+        adafruitDisplay->setPartialWindow(0, 0, displayWidth, displayHeight);
+    }
+#elif defined(ELECROW_ThinkNode_M5)
+    {
+        // Start HSPI
+        hspi = new SPIClass(HSPI);
+        hspi->begin(PIN_EINK_SCLK, -1, PIN_EINK_MOSI, PIN_EINK_CS); // SCLK, MISO, MOSI, SS
+
+        auto lowLevel = new EINK_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY, *hspi);
+
+        adafruitDisplay = new GxEPD2_BW<EINK_DISPLAY_MODEL, EINK_DISPLAY_MODEL::HEIGHT>(*lowLevel);
+        adafruitDisplay->init();
+
+        adafruitDisplay->setRotation(4);
+
         adafruitDisplay->setPartialWindow(0, 0, displayWidth, displayHeight);
     }
 #elif defined(MESHLINK)
@@ -174,9 +193,8 @@ bool EInkDisplay::connect()
         }
     }
 
-#elif defined(HELTEC_WIRELESS_PAPER_V1_0) || defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_VISION_MASTER_E213) ||             \
+#elif defined(HELTEC_WIRELESS_PAPER_V1_0) || defined(HELTEC_VISION_MASTER_E290) || defined(TLORA_T3S3_EPAPER) ||                 \
-    defined(HELTEC_VISION_MASTER_E290) || defined(TLORA_T3S3_EPAPER) || defined(CROWPANEL_ESP32S3_5_EPAPER) ||                   \
+    defined(CROWPANEL_ESP32S3_5_EPAPER) || defined(CROWPANEL_ESP32S3_4_EPAPER) || defined(CROWPANEL_ESP32S3_2_EPAPER)
-    defined(CROWPANEL_ESP32S3_4_EPAPER) || defined(CROWPANEL_ESP32S3_2_EPAPER)
     {
         // Start HSPI
         hspi = new SPIClass(HSPI);
@@ -203,7 +221,7 @@ bool EInkDisplay::connect()
         adafruitDisplay->setRotation(0);
         adafruitDisplay->setPartialWindow(0, 0, EINK_WIDTH, EINK_HEIGHT);
     }
-#elif defined(M5_COREINK)
+#elif defined(M5_COREINK) || defined(T_DECK_PRO)
     auto lowLevel = new EINK_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY);
     adafruitDisplay = new GxEPD2_BW<EINK_DISPLAY_MODEL, EINK_DISPLAY_MODEL::HEIGHT>(*lowLevel);
     adafruitDisplay->init(115200, true, 40, false, SPI, SPISettings(4000000, MSBFIRST, SPI_MODE0));
@@ -232,6 +250,23 @@ bool EInkDisplay::connect()
         adafruitDisplay->init();
         adafruitDisplay->setRotation(3);
     }
+#elif defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_VISION_MASTER_E213)
+
+    // Detect display model, before starting SPI
+    EInkDetectionResult displayModel = detectEInk();
+
+    // Start HSPI
+    hspi = new SPIClass(HSPI);
+    hspi->begin(PIN_EINK_SCLK, -1, PIN_EINK_MOSI, PIN_EINK_CS); // SCLK, MISO, MOSI, SS
+
+    // Create GxEPD2 object
+    adafruitDisplay = new GxEPD2_Multi<GXEPD2_DRIVER_0, GXEPD2_DRIVER_1>((uint8_t)displayModel, PIN_EINK_CS, PIN_EINK_DC,
+                                                                         PIN_EINK_RES, PIN_EINK_BUSY, *hspi);
+
+    // Init GxEPD2
+    adafruitDisplay->init();
+    adafruitDisplay->setRotation(3);
+
 #endif
 
     return true;

src/graphics/EInkDisplay2.h

@@ -5,6 +5,10 @@
 #include "GxEPD2_BW.h"
 #include <OLEDDisplay.h>
 
+#ifdef GXEPD2_DRIVER_0 // If variant has multiple possible display models
+#include "GxEPD2Multi.h"
+#endif
+
 /**
  * An adapter class that allows using the GxEPD2 library as if it was an OLEDDisplay implementation.
  *
@@ -63,13 +67,20 @@ class EInkDisplay : public OLEDDisplay
     // Connect to the display
     virtual bool connect() override;
 
-    // AdafruitGFX display object - instantiated in connect(), variant specific
+#ifdef GXEPD2_DRIVER_0
+    // AdafruitGFX display object - wrapper for multiple drivers
+    // Allows runtime detection of multiple displays
+    // Avoid this situation if possible!
+    GxEPD2_Multi<GXEPD2_DRIVER_0, GXEPD2_DRIVER_1> *adafruitDisplay = NULL;
+#else
+    // AdafruitGFX display object (for single display model) - instantiated in connect(), variant specific
     GxEPD2_BW<EINK_DISPLAY_MODEL, EINK_DISPLAY_MODEL::HEIGHT> *adafruitDisplay = NULL;
+#endif
 
     // If display uses HSPI
 #if defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_WIRELESS_PAPER_V1_0) || defined(HELTEC_VISION_MASTER_E213) ||               \
     defined(HELTEC_VISION_MASTER_E290) || defined(TLORA_T3S3_EPAPER) || defined(CROWPANEL_ESP32S3_5_EPAPER) ||                   \
-    defined(CROWPANEL_ESP32S3_4_EPAPER) || defined(CROWPANEL_ESP32S3_2_EPAPER)
+    defined(CROWPANEL_ESP32S3_4_EPAPER) || defined(CROWPANEL_ESP32S3_2_EPAPER) || defined(ELECROW_ThinkNode_M5)
     SPIClass *hspi = NULL;
 #endif
 

src/graphics/GxEPD2Multi.h

@@ -0,0 +1,135 @@
+// Wrapper class for GxEPD2_BW
+
+// Generic signature at build-time, so that we can detect display model at run-time
+// Workaround for issue of GxEPD2_BW objects not having a shared base class
+// Only exposes methods which we are actually using
+
+template <typename Driver0, typename Driver1> class GxEPD2_Multi
+{
+  public:
+    void drawPixel(int16_t x, int16_t y, uint16_t color)
+    {
+        if (which == 0)
+            driver0->drawPixel(x, y, color);
+        else
+            driver1->drawPixel(x, y, color);
+    }
+
+    bool nextPage()
+    {
+        if (which == 0)
+            return driver0->nextPage();
+        else
+            return driver1->nextPage();
+    }
+
+    void hibernate()
+    {
+        if (which == 0)
+            driver0->hibernate();
+        else
+            driver1->hibernate();
+    }
+
+    void init(uint32_t serial_diag_bitrate = 0)
+    {
+        if (which == 0)
+            driver0->init(serial_diag_bitrate);
+        else
+            driver1->init(serial_diag_bitrate);
+    }
+
+    void init(uint32_t serial_diag_bitrate, bool initial, uint16_t reset_duration = 20, bool pulldown_rst_mode = false)
+    {
+        if (which == 0)
+            driver0->init(serial_diag_bitrate, initial, reset_duration, pulldown_rst_mode);
+        else
+            driver1->init(serial_diag_bitrate, initial, reset_duration, pulldown_rst_mode);
+    }
+
+    void setRotation(uint8_t x)
+    {
+        if (which == 0)
+            driver0->setRotation(x);
+        else
+            driver1->setRotation(x);
+    }
+
+    void setPartialWindow(uint16_t x, uint16_t y, uint16_t w, uint16_t h)
+    {
+        if (which == 0)
+            driver0->setPartialWindow(x, y, w, h);
+        else
+            driver1->setPartialWindow(x, y, w, h);
+    }
+
+    void setFullWindow()
+    {
+        if (which == 0)
+            driver0->setFullWindow();
+        else
+            driver1->setFullWindow();
+    }
+
+    int16_t width()
+    {
+        if (which == 0)
+            return driver0->width();
+        else
+            return driver1->width();
+    }
+
+    int16_t height()
+    {
+        if (which == 0)
+            return driver0->height();
+        else
+            return driver1->height();
+    }
+
+    void clearScreen(uint8_t value = 0xFF)
+    {
+        if (which == 0)
+            driver0->clearScreen();
+        else
+            driver1->clearScreen();
+    }
+
+    void endAsyncFull()
+    {
+        if (which == 0)
+            driver0->endAsyncFull();
+        else
+            driver1->endAsyncFull();
+    }
+
+    // Exposes methods of the GxEPD2_EPD object which is usually available as GxEPD2_BW::epd
+    class Epd2Wrapper
+    {
+      public:
+        bool isBusy() { return m_epd2->isBusy(); }
+        GxEPD2_EPD *m_epd2;
+    } epd2;
+
+    // Constructor
+    // Select driver by passing whichDriver as 0 or 1
+    GxEPD2_Multi(uint8_t whichDriver, int16_t cs, int16_t dc, int16_t rst, int16_t busy, SPIClass &spi)
+    {
+        assert(whichDriver == 0 || whichDriver == 1);
+        which = whichDriver;
+        LOG_DEBUG("GxEPD2_Multi driver: %d", which);
+
+        if (which == 0) {
+            driver0 = new GxEPD2_BW<Driver0, Driver0::HEIGHT>(Driver0(cs, dc, rst, busy, spi));
+            epd2.m_epd2 = &(driver0->epd2);
+        } else if (which == 1) {
+            driver1 = new GxEPD2_BW<Driver1, Driver1::HEIGHT>(Driver1(cs, dc, rst, busy, spi));
+            epd2.m_epd2 = &(driver1->epd2);
+        }
+    }
+
+  private:
+    uint8_t which;
+    GxEPD2_BW<Driver0, Driver0::HEIGHT> *driver0;
+    GxEPD2_BW<Driver1, Driver1::HEIGHT> *driver1;
+};

src/graphics/Screen.cpp

@@ -21,6 +21,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 */
 #include "Screen.h"
+#include "NodeDB.h"
 #include "PowerMon.h"
 #include "Throttle.h"
 #include "configuration.h"
@@ -44,7 +45,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #endif
 #include "FSCommon.h"
 #include "MeshService.h"
-#include "NodeDB.h"
 #include "RadioLibInterface.h"
 #include "error.h"
 #include "gps/GeoCoord.h"
@@ -171,7 +171,7 @@ void Screen::showOverlayBanner(BannerOverlayOptions banner_overlay_options)
 }
 
 // Called to trigger a banner with custom message and duration
-void Screen::showNodePicker(const char *message, uint32_t durationMs, std::function<void(int)> bannerCallback)
+void Screen::showNodePicker(const char *message, uint32_t durationMs, std::function<void(uint32_t)> bannerCallback)
 {
 #ifdef USE_EINK
     EINK_ADD_FRAMEFLAG(dispdev, DEMAND_FAST); // Skip full refresh for all overlay menus
@@ -196,7 +196,6 @@ void Screen::showNodePicker(const char *message, uint32_t durationMs, std::funct
 void Screen::showNumberPicker(const char *message, uint32_t durationMs, uint8_t digits,
                               std::function<void(uint32_t)> bannerCallback)
 {
-    LOG_WARN("Show Number Picker");
 #ifdef USE_EINK
     EINK_ADD_FRAMEFLAG(dispdev, DEMAND_FAST); // Skip full refresh for all overlay menus
 #endif
@@ -294,13 +293,13 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
     LOG_INFO("Protobuf Value uiconfig.screen_rgb_color: %d", uiconfig.screen_rgb_color);
     int32_t rawRGB = uiconfig.screen_rgb_color;
     if (rawRGB > 0 && rawRGB <= 255255255) {
-        uint8_t r = (rawRGB >> 16) & 0xFF;
+        uint8_t TFT_MESH_r = (rawRGB >> 16) & 0xFF;
-        uint8_t g = (rawRGB >> 8) & 0xFF;
+        uint8_t TFT_MESH_g = (rawRGB >> 8) & 0xFF;
-        uint8_t b = rawRGB & 0xFF;
+        uint8_t TFT_MESH_b = rawRGB & 0xFF;
-        LOG_INFO("Values of r,g,b: %d, %d, %d", r, g, b);
+        LOG_INFO("Values of r,g,b: %d, %d, %d", TFT_MESH_r, TFT_MESH_g, TFT_MESH_b);
 
-        if (r <= 255 && g <= 255 && b <= 255) {
+        if (TFT_MESH_r <= 255 && TFT_MESH_g <= 255 && TFT_MESH_b <= 255) {
-            TFT_MESH = COLOR565(r, g, b);
+            TFT_MESH = COLOR565(TFT_MESH_r, TFT_MESH_g, TFT_MESH_b);
         }
     }
 
@@ -313,8 +312,8 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
                             ST7789_MISO, ST7789_SCK);
 #else
     dispdev = new ST7789Spi(&SPI1, ST7789_RESET, ST7789_RS, ST7789_NSS, GEOMETRY_RAWMODE, TFT_WIDTH, TFT_HEIGHT);
-    static_cast<ST7789Spi *>(dispdev)->setRGB(TFT_MESH);
 #endif
+    static_cast<ST7789Spi *>(dispdev)->setRGB(TFT_MESH);
 #elif defined(USE_SSD1306)
     dispdev = new SSD1306Wire(address.address, -1, -1, geometry,
                               (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
@@ -366,9 +365,6 @@ void Screen::doDeepSleep()
 {
 #ifdef USE_EINK
     setOn(false, graphics::UIRenderer::drawDeepSleepFrame);
-#ifdef PIN_EINK_EN
-    digitalWrite(PIN_EINK_EN, LOW); // power off backlight
-#endif
 #else
     // Without E-Ink display:
     setOn(false);
@@ -387,13 +383,19 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
 #ifdef T_WATCH_S3
             PMU->enablePowerOutput(XPOWERS_ALDO2);
 #endif
-#ifdef HELTEC_TRACKER_V1_X
+
-            uint8_t tft_vext_enabled = digitalRead(VEXT_ENABLE);
-#endif
 #if !ARCH_PORTDUINO
             dispdev->displayOn();
 #endif
 
+#ifdef PIN_EINK_EN
+            if (uiconfig.screen_brightness == 1)
+                digitalWrite(PIN_EINK_EN, HIGH);
+#elif defined(PCA_PIN_EINK_EN)
+            if (uiconfig.screen_brightness == 1)
+                io.digitalWrite(PCA_PIN_EINK_EN, HIGH);
+#endif
+
 #if defined(ST7789_CS) &&                                                                                                        \
     !defined(M5STACK) // set display brightness when turning on screens. Just moved function from TFTDisplay to here.
             static_cast<TFTDisplay *>(dispdev)->setDisplayBrightness(brightness);
@@ -401,10 +403,7 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
 
             dispdev->displayOn();
 #ifdef HELTEC_TRACKER_V1_X
-            // If the TFT VEXT power is not enabled, initialize the UI.
+            ui->init();
-            if (!tft_vext_enabled) {
-                ui->init();
-            }
 #endif
 #ifdef USE_ST7789
             pinMode(VTFT_CTRL, OUTPUT);
@@ -426,11 +425,13 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             // eInkScreensaver parameter is usually NULL (default argument), default frame used instead
             setScreensaverFrames(einkScreensaver);
 #endif
-#ifdef ELECROW_ThinkNode_M1
+
-            if (digitalRead(PIN_EINK_EN) == HIGH) {
+#ifdef PIN_EINK_EN
-                digitalWrite(PIN_EINK_EN, LOW);
+            digitalWrite(PIN_EINK_EN, LOW);
-            }
+#elif defined(PCA_PIN_EINK_EN)
+            io.digitalWrite(PCA_PIN_EINK_EN, LOW);
 #endif
+
             dispdev->displayOff();
 #ifdef USE_ST7789
             SPI1.end();
@@ -585,7 +586,7 @@ void Screen::setup()
             touchScreenImpl1->init();
         }
     }
-#elif HAS_TOUCHSCREEN
+#elif HAS_TOUCHSCREEN && !defined(USE_EINK)
     touchScreenImpl1 =
         new TouchScreenImpl1(dispdev->getWidth(), dispdev->getHeight(), static_cast<TFTDisplay *>(dispdev)->getTouch);
     touchScreenImpl1->init();
@@ -641,6 +642,11 @@ void Screen::forceDisplay(bool forceUiUpdate)
 
     // Tell EInk class to update the display
     static_cast<EInkDisplay *>(dispdev)->forceDisplay();
+#else
+    // No delay between UI frame rendering
+    if (forceUiUpdate) {
+        setFastFramerate();
+    }
 #endif
 }
 
@@ -686,7 +692,7 @@ int32_t Screen::runOnce()
 
 #ifndef DISABLE_WELCOME_UNSET
     if (!NotificationRenderer::isOverlayBannerShowing() && config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_UNSET) {
-        menuHandler::LoraRegionPicker(0);
+        menuHandler::OnboardMessage();
     }
 #endif
     if (!NotificationRenderer::isOverlayBannerShowing() && rebootAtMsec != 0) {
@@ -865,6 +871,8 @@ void Screen::setFrames(FrameFocus focus)
     uint8_t previousFrameCount = framesetInfo.frameCount;
     FramesetInfo fsi; // Location of specific frames, for applying focus parameter
 
+    graphics::UIRenderer::rebuildFavoritedNodes();
+
     LOG_DEBUG("Show standard frames");
     showingNormalScreen = true;
 
@@ -944,22 +952,6 @@ void Screen::setFrames(FrameFocus focus)
     indicatorIcons.push_back(digital_icon_clock);
 #endif
 
-    // We don't show the node info of our node (if we have it yet - we should)
-    size_t numMeshNodes = nodeDB->getNumMeshNodes();
-    if (numMeshNodes > 0)
-        numMeshNodes--;
-
-    for (size_t i = 0; i < nodeDB->getNumMeshNodes(); i++) {
-        const meshtastic_NodeInfoLite *n = nodeDB->getMeshNodeByIndex(i);
-        if (n && n->num != nodeDB->getNodeNum() && n->is_favorite) {
-            if (fsi.positions.firstFavorite == 255)
-                fsi.positions.firstFavorite = numframes;
-            fsi.positions.lastFavorite = numframes;
-            normalFrames[numframes++] = graphics::UIRenderer::drawNodeInfo;
-            indicatorIcons.push_back(icon_node);
-        }
-    }
-
 #if HAS_WIFI && !defined(ARCH_PORTDUINO)
     if (!dismissedFrames.wifi && isWifiAvailable()) {
         fsi.positions.wifi = numframes;
@@ -969,7 +961,7 @@ void Screen::setFrames(FrameFocus focus)
 #endif
 
     // Beware of what changes you make in this code!
-    // We pass numfames into GetMeshModulesWithUIFrames() which is highly important!
+    // We pass numframes into GetMeshModulesWithUIFrames() which is highly important!
     // Inside of that callback, goes over to MeshModule.cpp and we run
     // modulesWithUIFrames.resize(startIndex, nullptr), to insert nullptr
     // entries until we're ready to start building the matching entries.
@@ -998,6 +990,34 @@ void Screen::setFrames(FrameFocus focus)
 
     LOG_DEBUG("Added modules.  numframes: %d", numframes);
 
+    // We don't show the node info of our node (if we have it yet - we should)
+    size_t numMeshNodes = nodeDB->getNumMeshNodes();
+    if (numMeshNodes > 0)
+        numMeshNodes--;
+
+    // Temporary array to hold favorite node frames
+    std::vector<FrameCallback> favoriteFrames;
+
+    for (size_t i = 0; i < nodeDB->getNumMeshNodes(); i++) {
+        const meshtastic_NodeInfoLite *n = nodeDB->getMeshNodeByIndex(i);
+        if (n && n->num != nodeDB->getNodeNum() && n->is_favorite) {
+            favoriteFrames.push_back(graphics::UIRenderer::drawNodeInfo);
+        }
+    }
+
+    // Insert favorite frames *after* collecting them all
+    if (!favoriteFrames.empty()) {
+        fsi.positions.firstFavorite = numframes;
+        for (const auto &f : favoriteFrames) {
+            normalFrames[numframes++] = f;
+            indicatorIcons.push_back(icon_node);
+        }
+        fsi.positions.lastFavorite = numframes - 1;
+    } else {
+        fsi.positions.firstFavorite = 255;
+        fsi.positions.lastFavorite = 255;
+    }
+
     fsi.frameCount = numframes;   // Total framecount is used to apply FOCUS_PRESERVE
     this->frameCount = numframes; // ✅ Save frame count for use in custom overlay
     LOG_DEBUG("Finished build frames. numframes: %d", numframes);
@@ -1009,8 +1029,7 @@ void Screen::setFrames(FrameFocus focus)
     static OverlayCallback overlays[] = {graphics::UIRenderer::drawNavigationBar, NotificationRenderer::drawBannercallback};
     ui->setOverlays(overlays, sizeof(overlays) / sizeof(overlays[0]));
 
-    prevFrame = -1; // Force drawNodeInfo to pick a new node (because our list
+    prevFrame = -1; // Force drawNodeInfo to pick a new node (because our list just changed)
-                    // just changed)
 
     // Focus on a specific frame, in the frame set we just created
     switch (focus) {
@@ -1247,8 +1266,12 @@ int Screen::handleTextMessage(const meshtastic_MeshPacket *packet)
             devicestate.has_rx_text_message = true; // Needed to include the message frame
             hasUnreadMessage = true;                // Enables mail icon in the header
             setFrames(FOCUS_PRESERVE);              // Refresh frame list without switching view
-            forceDisplay();                         // Forces screen redraw
 
+            // Only wake/force display if the configuration allows it
+            if (shouldWakeOnReceivedMessage()) {
+                setOn(true);    // Wake up the screen first
+                forceDisplay(); // Forces screen redraw
+            }
             // === Prepare banner content ===
             const meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(packet->from);
             const char *longName = (node && node->has_user) ? node->user.long_name : nullptr;
@@ -1319,7 +1342,7 @@ int Screen::handleInputEvent(const InputEvent *event)
     setFastFramerate();                       // Draw ASAP
 #endif
     if (NotificationRenderer::isOverlayBannerShowing()) {
-        NotificationRenderer::inEvent = event->inputEvent;
+        NotificationRenderer::inEvent = *event;
         static OverlayCallback overlays[] = {graphics::UIRenderer::drawNavigationBar, NotificationRenderer::drawBannercallback};
         ui->setOverlays(overlays, sizeof(overlays) / sizeof(overlays[0]));
         setFastFramerate(); // Draw ASAP
@@ -1359,9 +1382,12 @@ int Screen::handleInputEvent(const InputEvent *event)
                     menuHandler::clockMenu();
                 } else if (this->ui->getUiState()->currentFrame == framesetInfo.positions.lora) {
                     menuHandler::LoraRegionPicker();
-                } else if (this->ui->getUiState()->currentFrame == framesetInfo.positions.textMessage &&
+                } else if (this->ui->getUiState()->currentFrame == framesetInfo.positions.textMessage) {
-                           devicestate.rx_text_message.from) {
+                    if (devicestate.rx_text_message.from) {
-                    menuHandler::messageResponseMenu();
+                        menuHandler::messageResponseMenu();
+                    } else {
+                        menuHandler::textMessageBaseMenu();
+                    }
                 } else if (framesetInfo.positions.firstFavorite != 255 &&
                            this->ui->getUiState()->currentFrame >= framesetInfo.positions.firstFavorite &&
                            this->ui->getUiState()->currentFrame <= framesetInfo.positions.lastFavorite) {
@@ -1413,3 +1439,23 @@ bool Screen::isOverlayBannerShowing()
 #else
 graphics::Screen::Screen(ScanI2C::DeviceAddress, meshtastic_Config_DisplayConfig_OledType, OLEDDISPLAY_GEOMETRY) {}
 #endif // HAS_SCREEN
+
+bool shouldWakeOnReceivedMessage()
+{
+    /*
+    The goal here is to determine when we do NOT wake up the screen on message received:
+    - Any ext. notifications are turned on
+    - If role is not client / client_mute
+    - If the battery level is very low
+    */
+    if (moduleConfig.external_notification.enabled) {
+        return false;
+    }
+    if (!meshtastic_Config_DeviceConfig_Role_CLIENT && !meshtastic_Config_DeviceConfig_Role_CLIENT_MUTE) {
+        return false;
+    }
+    if (powerStatus && powerStatus->getBatteryChargePercent() < 10) {
+        return false;
+    }
+    return true;
+}

src/graphics/Screen.h

@@ -26,6 +26,8 @@ struct BannerOverlayOptions {
 };
 } // namespace graphics
 
+bool shouldWakeOnReceivedMessage();
+
 #if !HAS_SCREEN
 #include "power.h"
 namespace graphics
@@ -92,6 +94,7 @@ class Screen
 #include "commands.h"
 #include "concurrency/LockGuard.h"
 #include "concurrency/OSThread.h"
+#include "graphics/draw/MenuHandler.h"
 #include "input/InputBroker.h"
 #include "mesh/MeshModule.h"
 #include "modules/AdminModule.h"
@@ -308,9 +311,15 @@ class Screen : public concurrency::OSThread
     void showSimpleBanner(const char *message, uint32_t durationMs = 0);
     void showOverlayBanner(BannerOverlayOptions);
 
-    void showNodePicker(const char *message, uint32_t durationMs, std::function<void(int)> bannerCallback);
+    void showNodePicker(const char *message, uint32_t durationMs, std::function<void(uint32_t)> bannerCallback);
     void showNumberPicker(const char *message, uint32_t durationMs, uint8_t digits, std::function<void(uint32_t)> bannerCallback);
 
+    void requestMenu(graphics::menuHandler::screenMenus menuToShow)
+    {
+        graphics::menuHandler::menuQueue = menuToShow;
+        runNow();
+    }
+
     void startFirmwareUpdateScreen()
     {
         ScreenCmd cmd;

src/graphics/ScreenFonts.h

@@ -16,7 +16,7 @@
 #include "graphics/fonts/OLEDDisplayFontsCS.h"
 #endif
 
-#ifdef CROWPANEL_ESP32S3_5_EPAPER
+#if defined(CROWPANEL_ESP32S3_5_EPAPER) && defined(USE_EINK)
 #include "graphics/fonts/EinkDisplayFonts.h"
 #endif
 
@@ -40,6 +40,9 @@
 #ifdef OLED_PL
 #define FONT_MEDIUM_LOCAL ArialMT_Plain_16_PL // Height: 19
 #else
+#ifdef OLED_RU
+#define FONT_MEDIUM_LOCAL ArialMT_Plain_16_RU // Height: 19
+#else
 #ifdef OLED_UA
 #define FONT_MEDIUM_LOCAL ArialMT_Plain_16_UA // Height: 19
 #else
@@ -50,9 +53,13 @@
 #endif
 #endif
 #endif
+#endif
 #ifdef OLED_PL
 #define FONT_LARGE_LOCAL ArialMT_Plain_24_PL // Height: 28
 #else
+#ifdef OLED_RU
+#define FONT_LARGE_LOCAL ArialMT_Plain_24_RU // Height: 28
+#else
 #ifdef OLED_UA
 #define FONT_LARGE_LOCAL ArialMT_Plain_24_UA // Height: 28
 #else
@@ -63,6 +70,7 @@
 #endif
 #endif
 #endif
+#endif
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
      defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS)) &&                                  \
@@ -77,7 +85,7 @@
 #define FONT_LARGE FONT_LARGE_LOCAL   // Height: 28
 #endif
 
-#if defined(CROWPANEL_ESP32S3_5_EPAPER)
+#if defined(CROWPANEL_ESP32S3_5_EPAPER) && defined(USE_EINK)
 #undef FONT_SMALL
 #undef FONT_MEDIUM
 #undef FONT_LARGE

src/graphics/SharedUIDisplay.cpp

@@ -206,7 +206,7 @@ void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *ti
         timeX = screenW - xOffset - timeStrWidth + 3;
 
         // === Show Mail or Mute Icon to the Left of Time ===
-        int iconRightEdge = timeX - 1;
+        int iconRightEdge = timeX - 2;
 
         bool showMail = false;
 

src/graphics/TFTDisplay.cpp

@@ -849,9 +849,29 @@ static LGFX *tft = nullptr;
 #include <lgfx/v1/platforms/esp32s3/Bus_RGB.hpp>
 #include <lgfx/v1/platforms/esp32s3/Panel_RGB.hpp>
 
+class PanelInit_ST7701 : public lgfx::Panel_ST7701
+{
+  public:
+    const uint8_t *getInitCommands(uint8_t listno) const override
+    {
+        // 180 degree hw rotation: vertical flip, horizontal flip
+        static constexpr const uint8_t list1[] = {0x36, 1,   0x10,                         // MADCTL for vertical flip
+                                                  0xFF, 5,   0x77, 0x01, 0x00, 0x00, 0x10, // Command2 BK0 SEL
+                                                  0xC7, 1,   0x04, // SDIR: X-direction Control (Horizontal Flip)
+                                                  0xFF, 5,   0x77, 0x01, 0x00, 0x00, 0x00, // Command2 BK0 DIS
+                                                  0xFF, 0xFF};
+        switch (listno) {
+        case 1:
+            return list1;
+        default:
+            return lgfx::Panel_ST7701::getInitCommands(listno);
+        }
+    }
+};
+
 class LGFX : public lgfx::LGFX_Device
 {
-    lgfx::Panel_ST7701 _panel_instance;
+    PanelInit_ST7701 _panel_instance;
     lgfx::Bus_RGB _bus_instance;
     lgfx::Light_PWM _light_instance;
     lgfx::Touch_FT5x06 _touch_instance;
@@ -1184,9 +1204,9 @@ bool TFTDisplay::connect()
     attachInterrupt(digitalPinToInterrupt(SCREEN_TOUCH_INT), rak14014_tpIntHandle, FALLING);
 #elif defined(T_DECK) || defined(PICOMPUTER_S3) || defined(CHATTER_2)
     tft->setRotation(1); // T-Deck has the TFT in landscape
-#elif defined(T_WATCH_S3) || defined(SENSECAP_INDICATOR)
+#elif defined(T_WATCH_S3)
     tft->setRotation(2); // T-Watch S3 left-handed orientation
-#elif ARCH_PORTDUINO
+#elif ARCH_PORTDUINO || defined(SENSECAP_INDICATOR)
     tft->setRotation(0); // use config.yaml to set rotation
 #else
     tft->setRotation(3); // Orient horizontal and wide underneath the silkscreen name label

src/graphics/draw/ClockRenderer.cpp

@@ -186,7 +186,7 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
 {
     display->clear();
     display->setTextAlignment(TEXT_ALIGN_LEFT);
-    int line = 1;
+
     // === Set Title, Blank for Clock
     const char *titleStr = "";
     // === Header ===
@@ -218,7 +218,6 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
         hour %= 12;
         if (hour == 0)
             hour = 12;
-        bool isPM = hour >= 12;
         snprintf(timeString, sizeof(timeString), "%d:%02d", hour, minute);
     } else {
         snprintf(timeString, sizeof(timeString), "%02d:%02d", hour, minute);
@@ -230,6 +229,8 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
 
 #ifdef T_WATCH_S3
     float scale = 1.5;
+#elif defined(CHATTER_2)
+    float scale = 1.1;
 #else
     float scale = 0.75;
     if (isHighResolution) {
@@ -285,6 +286,9 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
     int yOffset = (isHighResolution) ? 3 : 1;
 #ifdef SENSECAP_INDICATOR
     yOffset -= 3;
+#endif
+#ifdef T_DECK
+    yOffset -= 5;
 #endif
     if (config.display.use_12h_clock) {
         display->drawString(startingHourMinuteTextX + xOffset, (display->getHeight() - hourMinuteTextY) - yOffset - 2,
@@ -362,7 +366,7 @@ void drawAnalogClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
     // hour hand radius and y coordinate
     int16_t hourHandRadius = radius * 0.35;
     if (isHighResolution) {
-        int16_t hourHandRadius = radius * 0.55;
+        hourHandRadius = radius * 0.55;
     }
     int16_t hourHandNoonY = centerY - hourHandRadius;
 
@@ -381,7 +385,7 @@ void drawAnalogClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
 
         bool isPM = hour >= 12;
         if (config.display.use_12h_clock) {
-            bool isPM = hour >= 12;
+            isPM = hour >= 12;
             display->setFont(FONT_SMALL);
             int yOffset = isHighResolution ? 1 : 0;
 #ifdef USE_EINK

src/graphics/draw/DebugRenderer.cpp

@@ -412,9 +412,9 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
     float freq = RadioLibInterface::instance->getFreq();
     snprintf(freqStr, sizeof(freqStr), "%.3f", freq);
     if (config.lora.channel_num == 0) {
-        snprintf(frequencyslot, sizeof(frequencyslot), "Freq: %smhz", freqStr);
+        snprintf(frequencyslot, sizeof(frequencyslot), "Freq: %sMHz", freqStr);
     } else {
-        snprintf(frequencyslot, sizeof(frequencyslot), "Freq/Ch: %smhz (%d)", freqStr, config.lora.channel_num);
+        snprintf(frequencyslot, sizeof(frequencyslot), "Freq/Ch: %sMHz (%d)", freqStr, config.lora.channel_num);
     }
     size_t len = strlen(frequencyslot);
     if (len >= 4 && strcmp(frequencyslot + len - 4, " (0)") == 0) {
@@ -483,7 +483,7 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
 }
 
 // ****************************
-// *      Memory Screen       *
+// *      System Screen       *
 // ****************************
 void drawMemoryUsage(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
@@ -593,7 +593,19 @@ void drawMemoryUsage(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
     }
     line += 1;
     char appversionstr[35];
-    snprintf(appversionstr, sizeof(appversionstr), "Ver.: %s", optstr(APP_VERSION));
+    snprintf(appversionstr, sizeof(appversionstr), "Ver: %s", optstr(APP_VERSION));
+    char appversionstr_formatted[40];
+    char *lastDot = strrchr(appversionstr, '.');
+    if (lastDot) {
+        size_t prefixLen = lastDot - appversionstr;
+        strncpy(appversionstr_formatted, appversionstr, prefixLen);
+        appversionstr_formatted[prefixLen] = '\0';
+        strncat(appversionstr_formatted, " (", sizeof(appversionstr_formatted) - strlen(appversionstr_formatted) - 1);
+        strncat(appversionstr_formatted, lastDot + 1, sizeof(appversionstr_formatted) - strlen(appversionstr_formatted) - 1);
+        strncat(appversionstr_formatted, ")", sizeof(appversionstr_formatted) - strlen(appversionstr_formatted) - 1);
+        strncpy(appversionstr, appversionstr_formatted, sizeof(appversionstr) - 1);
+        appversionstr[sizeof(appversionstr) - 1] = '\0';
+    }
     int textWidth = display->getStringWidth(appversionstr);
     int nameX = (SCREEN_WIDTH - textWidth) / 2;
     display->drawString(nameX, getTextPositions(display)[line], appversionstr);

src/graphics/draw/MenuHandler.cpp

@@ -13,6 +13,10 @@
 #include "main.h"
 #include "modules/AdminModule.h"
 #include "modules/CannedMessageModule.h"
+#include "modules/KeyVerificationModule.h"
+
+#include "modules/TraceRouteModule.h"
+#include <functional>
 
 extern uint16_t TFT_MESH;
 
@@ -22,6 +26,27 @@ menuHandler::screenMenus menuHandler::menuQueue = menu_none;
 bool test_enabled = false;
 uint8_t test_count = 0;
 
+void menuHandler::OnboardMessage()
+{
+    static const char *optionsArray[] = {"OK", "Got it!"};
+    enum optionsNumbers { OK, got };
+    BannerOverlayOptions bannerOptions;
+#if HAS_TFT
+    bannerOptions.message = "Welcome to Meshtastic!\nSwipe to navigate and\nlong press to select\nor open a menu.";
+#elif defined(BUTTON_PIN)
+    bannerOptions.message = "Welcome to Meshtastic!\nClick to navigate and\nlong press to select\nor open a menu.";
+#else
+    bannerOptions.message = "Welcome to Meshtastic!\nUse the Select button\nto open menus\nand make selections.";
+#endif
+    bannerOptions.optionsArrayPtr = optionsArray;
+    bannerOptions.optionsCount = 2;
+    bannerOptions.bannerCallback = [](int selected) -> void {
+        menuHandler::menuQueue = menuHandler::no_timeout_lora_picker;
+        screen->runNow();
+    };
+    screen->showOverlayBanner(bannerOptions);
+}
+
 void menuHandler::LoraRegionPicker(uint32_t duration)
 {
     static const char *optionsArray[] = {"Back",
@@ -50,12 +75,14 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
                                          "PH_915",
                                          "ANZ_433",
                                          "KZ_433",
-                                         "KZ_863"};
+                                         "KZ_863",
+                                         "NP_865",
+                                         "BR_902"};
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Set the LoRa region";
     bannerOptions.durationMs = duration;
     bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 25;
+    bannerOptions.optionsCount = 27;
     bannerOptions.InitialSelected = 0;
     bannerOptions.bannerCallback = [](int selected) -> void {
         if (selected != 0 && config.lora.region != _meshtastic_Config_LoRaConfig_RegionCode(selected)) {
@@ -114,6 +141,22 @@ void menuHandler::TwelveHourPicker()
     screen->showOverlayBanner(bannerOptions);
 }
 
+// Reusable confirmation prompt function
+void menuHandler::showConfirmationBanner(const char *message, std::function<void()> onConfirm)
+{
+    static const char *confirmOptions[] = {"No", "Yes"};
+    BannerOverlayOptions confirmBanner;
+    confirmBanner.message = message;
+    confirmBanner.optionsArrayPtr = confirmOptions;
+    confirmBanner.optionsCount = 2;
+    confirmBanner.bannerCallback = [onConfirm](int confirmSelected) -> void {
+        if (confirmSelected == 1) {
+            onConfirm();
+        }
+    };
+    screen->showOverlayBanner(confirmBanner);
+}
+
 void menuHandler::ClockFacePicker()
 {
     static const char *optionsArray[] = {"Back", "Digital", "Analog"};
@@ -128,14 +171,15 @@ void menuHandler::ClockFacePicker()
             screen->runNow();
         } else if (selected == Digital) {
             uiconfig.is_clockface_analog = false;
-            nodeDB->saveProto("/prefs/uiconfig.proto", meshtastic_DeviceUIConfig_size, &meshtastic_DeviceUIConfig_msg, &uiconfig);
+            saveUIConfig();
             screen->setFrames(Screen::FOCUS_CLOCK);
         } else {
             uiconfig.is_clockface_analog = true;
-            nodeDB->saveProto("/prefs/uiconfig.proto", meshtastic_DeviceUIConfig_size, &meshtastic_DeviceUIConfig_msg, &uiconfig);
+            saveUIConfig();
             screen->setFrames(Screen::FOCUS_CLOCK);
         }
     };
+    bannerOptions.InitialSelected = uiconfig.is_clockface_analog ? 2 : 1;
     screen->showOverlayBanner(bannerOptions);
 }
 
@@ -149,6 +193,7 @@ void menuHandler::TZPicker()
                                          "US/Mountain",
                                          "US/Central",
                                          "US/Eastern",
+                                         "BR/Brasilia",
                                          "UTC",
                                          "EU/Western",
                                          "EU/"
@@ -163,7 +208,7 @@ void menuHandler::TZPicker()
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Pick Timezone";
     bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 17;
+    bannerOptions.optionsCount = 19;
     bannerOptions.bannerCallback = [](int selected) -> void {
         if (selected == 0) {
             menuHandler::menuQueue = menuHandler::clock_menu;
@@ -182,25 +227,27 @@ void menuHandler::TZPicker()
             strncpy(config.device.tzdef, "CST6CDT,M3.2.0,M11.1.0", sizeof(config.device.tzdef));
         } else if (selected == 7) { // Eastern
             strncpy(config.device.tzdef, "EST5EDT,M3.2.0,M11.1.0", sizeof(config.device.tzdef));
-        } else if (selected == 8) { // UTC
+        } else if (selected == 8) { // Brazil
-            strncpy(config.device.tzdef, "UTC", sizeof(config.device.tzdef));
+            strncpy(config.device.tzdef, "BRT3", sizeof(config.device.tzdef));
-        } else if (selected == 9) { // EU/Western
+        } else if (selected == 9) { // UTC
+            strncpy(config.device.tzdef, "UTC0", sizeof(config.device.tzdef));
+        } else if (selected == 10) { // EU/Western
             strncpy(config.device.tzdef, "GMT0BST,M3.5.0/1,M10.5.0", sizeof(config.device.tzdef));
-        } else if (selected == 10) { // EU/Central
+        } else if (selected == 11) { // EU/Central
             strncpy(config.device.tzdef, "CET-1CEST,M3.5.0,M10.5.0/3", sizeof(config.device.tzdef));
-        } else if (selected == 11) { // EU/Eastern
+        } else if (selected == 12) { // EU/Eastern
             strncpy(config.device.tzdef, "EET-2EEST,M3.5.0/3,M10.5.0/4", sizeof(config.device.tzdef));
-        } else if (selected == 12) { // Asia/Kolkata
+        } else if (selected == 13) { // Asia/Kolkata
             strncpy(config.device.tzdef, "IST-5:30", sizeof(config.device.tzdef));
-        } else if (selected == 13) { // China
+        } else if (selected == 14) { // China
             strncpy(config.device.tzdef, "HKT-8", sizeof(config.device.tzdef));
-        } else if (selected == 14) { // AU/AWST
+        } else if (selected == 15) { // AU/AWST
             strncpy(config.device.tzdef, "AWST-8", sizeof(config.device.tzdef));
-        } else if (selected == 15) { // AU/ACST
+        } else if (selected == 16) { // AU/ACST
             strncpy(config.device.tzdef, "ACST-9:30ACDT,M10.1.0,M4.1.0/3", sizeof(config.device.tzdef));
-        } else if (selected == 16) { // AU/AEST
+        } else if (selected == 17) { // AU/AEST
             strncpy(config.device.tzdef, "AEST-10AEDT,M10.1.0,M4.1.0/3", sizeof(config.device.tzdef));
-        } else if (selected == 17) { // NZ
+        } else if (selected == 18) { // NZ
             strncpy(config.device.tzdef, "NZST-12NZDT,M9.5.0,M4.1.0/3", sizeof(config.device.tzdef));
         }
         if (selected != 0) {
@@ -236,27 +283,25 @@ void menuHandler::clockMenu()
 
 void menuHandler::messageResponseMenu()
 {
+    enum optionsNumbers { Back = 0, Dismiss = 1, Preset = 2, Freetext = 3, Aloud = 4, enumEnd = 5 };
+
+    static const char *optionsArray[enumEnd] = {"Back", "Dismiss", "Reply via Preset"};
+    static int optionsEnumArray[enumEnd] = {Back, Dismiss, Preset};
+    int options = 3;
 
-    static const char **optionsArrayPtr;
-    int options;
-    enum optionsNumbers { Back = 0, Dismiss = 1, Preset = 2, Freetext = 3 };
     if (kb_found) {
-        static const char *optionsArray[] = {"Back", "Dismiss", "Reply via Preset", "Reply via Freetext"};
+        optionsArray[options] = "Reply via Freetext";
-        optionsArrayPtr = optionsArray;
+        optionsEnumArray[options++] = Freetext;
-        options = 4;
-    } else {
-        static const char *optionsArray[] = {"Back", "Dismiss", "Reply via Preset"};
-        optionsArrayPtr = optionsArray;
-        options = 3;
     }
+
 #ifdef HAS_I2S
-    static const char *optionsArray[] = {"Back", "Dismiss", "Reply via Preset", "Reply via Freetext", "Read Aloud"};
+    optionsArray[options] = "Read Aloud";
-    optionsArrayPtr = optionsArray;
+    optionsEnumArray[options++] = Aloud;
-    options = 5;
 #endif
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Message Action";
-    bannerOptions.optionsArrayPtr = optionsArrayPtr;
+    bannerOptions.optionsArrayPtr = optionsArray;
+    bannerOptions.optionsEnumPtr = optionsEnumArray;
     bannerOptions.optionsCount = options;
     bannerOptions.bannerCallback = [](int selected) -> void {
         if (selected == Dismiss) {
@@ -275,7 +320,7 @@ void menuHandler::messageResponseMenu()
             }
         }
 #ifdef HAS_I2S
-        else if (selected == 4) {
+        else if (selected == Aloud) {
             const meshtastic_MeshPacket &mp = devicestate.rx_text_message;
             const char *msg = reinterpret_cast<const char *>(mp.decoded.payload.bytes);
 
@@ -288,13 +333,13 @@ void menuHandler::messageResponseMenu()
 
 void menuHandler::homeBaseMenu()
 {
-    enum optionsNumbers { Back, Backlight, Position, Preset, Freetext, Bluetooth, Sleep };
+    enum optionsNumbers { Back, Backlight, Position, Preset, Freetext, Sleep, enumEnd };
 
-    static const char *optionsArray[6] = {"Back"};
+    static const char *optionsArray[enumEnd] = {"Back"};
-    static int optionsEnumArray[6] = {Back};
+    static int optionsEnumArray[enumEnd] = {Back};
     int options = 1;
 
-#ifdef PIN_EINK_EN
+#if defined(PIN_EINK_EN) || defined(PCA_PIN_EINK_EN)
     optionsArray[options] = "Toggle Backlight";
     optionsEnumArray[options++] = Backlight;
 #else
@@ -310,8 +355,6 @@ void menuHandler::homeBaseMenu()
         optionsArray[options] = "New Freetext Msg";
         optionsEnumArray[options++] = Freetext;
     }
-    optionsArray[options] = "Bluetooth Toggle";
-    optionsEnumArray[options++] = Bluetooth;
 
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Home Action";
@@ -320,12 +363,24 @@ void menuHandler::homeBaseMenu()
     bannerOptions.optionsCount = options;
     bannerOptions.bannerCallback = [](int selected) -> void {
         if (selected == Backlight) {
-#ifdef PIN_EINK_EN
+#if defined(PIN_EINK_EN)
-            if (digitalRead(PIN_EINK_EN) == HIGH) {
+            if (uiconfig.screen_brightness == 1) {
+                uiconfig.screen_brightness = 0;
                 digitalWrite(PIN_EINK_EN, LOW);
             } else {
+                uiconfig.screen_brightness = 1;
                 digitalWrite(PIN_EINK_EN, HIGH);
             }
+            saveUIConfig();
+#elif defined(PCA_PIN_EINK_EN)
+            if (uiconfig.screen_brightness == 1) {
+                uiconfig.screen_brightness = 0;
+                io.digitalWrite(PCA_PIN_EINK_EN, LOW);
+            } else {
+                uiconfig.screen_brightness = 1;
+                io.digitalWrite(PCA_PIN_EINK_EN, HIGH);
+            }
+            saveUIConfig();
 #endif
         } else if (selected == Sleep) {
             screen->setOn(false);
@@ -336,9 +391,35 @@ void menuHandler::homeBaseMenu()
             cannedMessageModule->LaunchWithDestination(NODENUM_BROADCAST);
         } else if (selected == Freetext) {
             cannedMessageModule->LaunchFreetextWithDestination(NODENUM_BROADCAST);
-        } else if (selected == Bluetooth) {
+        }
-            InputEvent event = {.inputEvent = (input_broker_event)170, .kbchar = 170, .touchX = 0, .touchY = 0};
+    };
-            inputBroker->injectInputEvent(&event);
+    screen->showOverlayBanner(bannerOptions);
+}
+
+void menuHandler::textMessageBaseMenu()
+{
+    enum optionsNumbers { Back, Preset, Freetext, enumEnd };
+
+    static const char *optionsArray[enumEnd] = {"Back"};
+    static int optionsEnumArray[enumEnd] = {Back};
+    int options = 1;
+    optionsArray[options] = "New Preset Msg";
+    optionsEnumArray[options++] = Preset;
+    if (kb_found) {
+        optionsArray[options] = "New Freetext Msg";
+        optionsEnumArray[options++] = Freetext;
+    }
+
+    BannerOverlayOptions bannerOptions;
+    bannerOptions.message = "Message Action";
+    bannerOptions.optionsArrayPtr = optionsArray;
+    bannerOptions.optionsEnumPtr = optionsEnumArray;
+    bannerOptions.optionsCount = options;
+    bannerOptions.bannerCallback = [](int selected) -> void {
+        if (selected == Preset) {
+            cannedMessageModule->LaunchWithDestination(NODENUM_BROADCAST);
+        } else if (selected == Freetext) {
+            cannedMessageModule->LaunchFreetextWithDestination(NODENUM_BROADCAST);
         }
     };
     screen->showOverlayBanner(bannerOptions);
@@ -346,37 +427,25 @@ void menuHandler::homeBaseMenu()
 
 void menuHandler::systemBaseMenu()
 {
-
+    enum optionsNumbers { Back, Notifications, ScreenOptions, Bluetooth, PowerMenu, Test, enumEnd };
-    // Check if brightness is supported
+    static const char *optionsArray[enumEnd] = {"Back"};
-    bool hasSupportBrightness = false;
+    static int optionsEnumArray[enumEnd] = {Back};
-#if defined(ST7789_CS) || defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) || defined(USE_SH1107) || HAS_TFT
-    hasSupportBrightness = true;
-#endif
-
-    enum optionsNumbers { Back, Beeps, Brightness, Reboot, Color, MUI, Test };
-    static const char *optionsArray[7] = {"Back"};
-    static int optionsEnumArray[7] = {Back};
     int options = 1;
 
-    optionsArray[options] = "Beeps Action";
+    optionsArray[options] = "Notifications";
-    optionsEnumArray[options++] = Beeps;
+    optionsEnumArray[options++] = Notifications;
-
+#if defined(ST7789_CS) || defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) || defined(USE_SH1107) ||             \
-    if (hasSupportBrightness) {
+    defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || HAS_TFT
-        optionsArray[options] = "Brightness";
+    optionsArray[options] = "Screen Options";
-        optionsEnumArray[options++] = Brightness;
+    optionsEnumArray[options++] = ScreenOptions;
-    }
-
-    optionsArray[options] = "Reboot";
-    optionsEnumArray[options++] = Reboot;
-
-#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || HAS_TFT
-    optionsArray[options] = "Screen Color";
-    optionsEnumArray[options++] = Color;
-#endif
-#if HAS_TFT
-    optionsArray[options] = "Switch to MUI";
-    optionsEnumArray[options++] = MUI;
 #endif
+
+    optionsArray[options] = "Bluetooth Toggle";
+    optionsEnumArray[options++] = Bluetooth;
+
+    optionsArray[options] = "Reboot/Shutdown";
+    optionsEnumArray[options++] = PowerMenu;
+
     if (test_enabled) {
         optionsArray[options] = "Test Menu";
         optionsEnumArray[options++] = Test;
@@ -388,24 +457,21 @@ void menuHandler::systemBaseMenu()
     bannerOptions.optionsCount = options;
     bannerOptions.optionsEnumPtr = optionsEnumArray;
     bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == Beeps) {
+        if (selected == Notifications) {
-            menuHandler::menuQueue = menuHandler::buzzermodemenupicker;
+            menuHandler::menuQueue = menuHandler::notifications_menu;
             screen->runNow();
-        } else if (selected == Brightness) {
+        } else if (selected == ScreenOptions) {
-            menuHandler::menuQueue = menuHandler::brightness_picker;
+            menuHandler::menuQueue = menuHandler::screen_options_menu;
             screen->runNow();
-        } else if (selected == Reboot) {
+        } else if (selected == PowerMenu) {
-            menuHandler::menuQueue = menuHandler::reboot_menu;
+            menuHandler::menuQueue = menuHandler::power_menu;
-            screen->runNow();
-        } else if (selected == MUI) {
-            menuHandler::menuQueue = menuHandler::mui_picker;
-            screen->runNow();
-        } else if (selected == Color) {
-            menuHandler::menuQueue = menuHandler::tftcolormenupicker;
             screen->runNow();
         } else if (selected == Test) {
             menuHandler::menuQueue = menuHandler::test_menu;
             screen->runNow();
+        } else if (selected == Bluetooth) {
+            menuQueue = bluetooth_toggle_menu;
+            screen->runNow();
         } else if (selected == Back && !test_enabled) {
             test_count++;
             if (test_count > 4) {
@@ -418,30 +484,37 @@ void menuHandler::systemBaseMenu()
 
 void menuHandler::favoriteBaseMenu()
 {
-    int options;
+    enum optionsNumbers { Back, Preset, Freetext, Remove, TraceRoute, enumEnd };
-    static const char **optionsArrayPtr;
+    static const char *optionsArray[enumEnd] = {"Back", "New Preset Msg"};
+    static int optionsEnumArray[enumEnd] = {Back, Preset};
+    int options = 2;
 
     if (kb_found) {
-        static const char *optionsArray[] = {"Back", "New Preset Msg", "New Freetext Msg", "Remove Favorite"};
+        optionsArray[options] = "New Freetext Msg";
-        optionsArrayPtr = optionsArray;
+        optionsEnumArray[options++] = Freetext;
-        options = 4;
-    } else {
-        static const char *optionsArray[] = {"Back", "New Preset Msg", "Remove Favorite"};
-        optionsArrayPtr = optionsArray;
-        options = 3;
     }
+    optionsArray[options] = "Trace Route";
+    optionsEnumArray[options++] = TraceRoute;
+    optionsArray[options] = "Remove Favorite";
+    optionsEnumArray[options++] = Remove;
+
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Favorites Action";
-    bannerOptions.optionsArrayPtr = optionsArrayPtr;
+    bannerOptions.optionsArrayPtr = optionsArray;
+    bannerOptions.optionsEnumPtr = optionsEnumArray;
     bannerOptions.optionsCount = options;
     bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == 1) {
+        if (selected == Preset) {
             cannedMessageModule->LaunchWithDestination(graphics::UIRenderer::currentFavoriteNodeNum);
-        } else if (selected == 2 && kb_found) {
+        } else if (selected == Freetext) {
             cannedMessageModule->LaunchFreetextWithDestination(graphics::UIRenderer::currentFavoriteNodeNum);
-        } else if ((!kb_found && selected == 2) || (selected == 3 && kb_found)) {
+        } else if (selected == Remove) {
             menuHandler::menuQueue = menuHandler::remove_favorite;
             screen->runNow();
+        } else if (selected == TraceRoute) {
+            if (traceRouteModule) {
+                traceRouteModule->launch(graphics::UIRenderer::currentFavoriteNodeNum);
+            }
         }
     };
     screen->showOverlayBanner(bannerOptions);
@@ -449,34 +522,29 @@ void menuHandler::favoriteBaseMenu()
 
 void menuHandler::positionBaseMenu()
 {
-    int options;
+    enum optionsNumbers { Back, GPSToggle, CompassMenu, CompassCalibrate, enumEnd };
-    static const char **optionsArrayPtr;
+
-    static const char *optionsArray[] = {"Back", "GPS Toggle", "Compass"};
+    static const char *optionsArray[enumEnd] = {"Back", "GPS Toggle", "Compass"};
-    static const char *optionsArrayCalibrate[] = {"Back", "GPS Toggle", "Compass", "Compass Calibrate"};
+    static int optionsEnumArray[enumEnd] = {Back, GPSToggle, CompassMenu};
+    int options = 3;
 
     if (accelerometerThread) {
-        optionsArrayPtr = optionsArrayCalibrate;
+        optionsArray[options] = "Compass Calibrate";
-        options = 4;
+        optionsEnumArray[options++] = CompassCalibrate;
-    } else {
-        optionsArrayPtr = optionsArray;
-        options = 3;
     }
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Position Action";
-    bannerOptions.optionsArrayPtr = optionsArrayPtr;
+    bannerOptions.optionsArrayPtr = optionsArray;
+    bannerOptions.optionsEnumPtr = optionsEnumArray;
     bannerOptions.optionsCount = options;
     bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == 1) {
+        if (selected == GPSToggle) {
-#if MESHTASTIC_EXCLUDE_GPS
-            menuQueue = menu_none;
-#else
             menuQueue = gps_toggle_menu;
             screen->runNow();
-#endif
+        } else if (selected == CompassMenu) {
-        } else if (selected == 2) {
             menuQueue = compass_point_north_menu;
             screen->runNow();
-        } else if (selected == 3) {
+        } else if (selected == CompassCalibrate) {
             accelerometerThread->calibrate(30);
         }
     };
@@ -485,18 +553,25 @@ void menuHandler::positionBaseMenu()
 
 void menuHandler::nodeListMenu()
 {
-    static const char *optionsArray[] = {"Back", "Add Favorite", "Reset NodeDB"};
+    enum optionsNumbers { Back, Favorite, TraceRoute, Verify, Reset, enumEnd };
+    static const char *optionsArray[] = {"Back", "Add Favorite", "Trace Route", "Key Verification", "Reset NodeDB"};
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Node Action";
     bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 3;
+    bannerOptions.optionsCount = 5;
     bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == 1) {
+        if (selected == Favorite) {
             menuQueue = add_favorite;
             screen->runNow();
-        } else if (selected == 2) {
+        } else if (selected == Verify) {
+            menuQueue = key_verification_init;
+            screen->runNow();
+        } else if (selected == Reset) {
             menuQueue = reset_node_db_menu;
             screen->runNow();
+        } else if (selected == TraceRoute) {
+            menuQueue = trace_route_menu;
+            screen->runNow();
         }
     };
     screen->showOverlayBanner(bannerOptions);
@@ -522,6 +597,7 @@ void menuHandler::resetNodeDBMenu()
 
 void menuHandler::compassNorthMenu()
 {
+    enum optionsNumbers { Back, Dynamic, Fixed, Freeze };
     static const char *optionsArray[] = {"Back", "Dynamic", "Fixed Ring", "Freeze Heading"};
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "North Directions?";
@@ -529,28 +605,25 @@ void menuHandler::compassNorthMenu()
     bannerOptions.optionsCount = 4;
     bannerOptions.InitialSelected = uiconfig.compass_mode + 1;
     bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == 1) {
+        if (selected == Dynamic) {
             if (uiconfig.compass_mode != meshtastic_CompassMode_DYNAMIC) {
                 uiconfig.compass_mode = meshtastic_CompassMode_DYNAMIC;
-                nodeDB->saveProto("/prefs/uiconfig.proto", meshtastic_DeviceUIConfig_size, &meshtastic_DeviceUIConfig_msg,
+                saveUIConfig();
-                                  &uiconfig);
                 screen->setFrames(graphics::Screen::FOCUS_PRESERVE);
             }
-        } else if (selected == 2) {
+        } else if (selected == Fixed) {
             if (uiconfig.compass_mode != meshtastic_CompassMode_FIXED_RING) {
                 uiconfig.compass_mode = meshtastic_CompassMode_FIXED_RING;
-                nodeDB->saveProto("/prefs/uiconfig.proto", meshtastic_DeviceUIConfig_size, &meshtastic_DeviceUIConfig_msg,
+                saveUIConfig();
-                                  &uiconfig);
                 screen->setFrames(graphics::Screen::FOCUS_PRESERVE);
             }
-        } else if (selected == 3) {
+        } else if (selected == Freeze) {
             if (uiconfig.compass_mode != meshtastic_CompassMode_FREEZE_HEADING) {
                 uiconfig.compass_mode = meshtastic_CompassMode_FREEZE_HEADING;
-                nodeDB->saveProto("/prefs/uiconfig.proto", meshtastic_DeviceUIConfig_size, &meshtastic_DeviceUIConfig_msg,
+                saveUIConfig();
-                                  &uiconfig);
                 screen->setFrames(graphics::Screen::FOCUS_PRESERVE);
             }
-        } else if (selected == 0) {
+        } else if (selected == Back) {
             menuQueue = position_base_menu;
             screen->runNow();
         }
@@ -561,6 +634,7 @@ void menuHandler::compassNorthMenu()
 #if !MESHTASTIC_EXCLUDE_GPS
 void menuHandler::GPSToggleMenu()
 {
+
     static const char *optionsArray[] = {"Back", "Enabled", "Disabled"};
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Toggle GPS";
@@ -587,11 +661,28 @@ void menuHandler::GPSToggleMenu()
 }
 #endif
 
+void menuHandler::BluetoothToggleMenu()
+{
+    static const char *optionsArray[] = {"Back", "Enabled", "Disabled"};
+    BannerOverlayOptions bannerOptions;
+    bannerOptions.message = "Toggle Bluetooth";
+    bannerOptions.optionsArrayPtr = optionsArray;
+    bannerOptions.optionsCount = 3;
+    bannerOptions.bannerCallback = [](int selected) -> void {
+        if (selected == 1 || selected == 2) {
+            InputEvent event = {.inputEvent = (input_broker_event)170, .kbchar = 170, .touchX = 0, .touchY = 0};
+            inputBroker->injectInputEvent(&event);
+        }
+    };
+    bannerOptions.InitialSelected = config.bluetooth.enabled ? 1 : 2;
+    screen->showOverlayBanner(bannerOptions);
+}
+
 void menuHandler::BuzzerModeMenu()
 {
     static const char *optionsArray[] = {"All Enabled", "Disabled", "Notifications", "System Only"};
     BannerOverlayOptions bannerOptions;
-    bannerOptions.message = "Beep Action";
+    bannerOptions.message = "Buzzer Mode";
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsCount = 4;
     bannerOptions.bannerCallback = [](int selected) -> void {
@@ -641,7 +732,7 @@ void menuHandler::BrightnessPickerMenu()
 #endif
 
             // Save to device
-            nodeDB->saveProto("/prefs/uiconfig.proto", meshtastic_DeviceUIConfig_size, &meshtastic_DeviceUIConfig_msg, &uiconfig);
+            saveUIConfig();
 
             LOG_INFO("Screen brightness set to %d", uiconfig.screen_brightness);
         }
@@ -652,13 +743,13 @@ void menuHandler::BrightnessPickerMenu()
 
 void menuHandler::switchToMUIMenu()
 {
-    static const char *optionsArray[] = {"Yes", "No"};
+    static const char *optionsArray[] = {"No", "Yes"};
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Switch to MUI?";
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsCount = 2;
     bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == 0) {
+        if (selected == 1) {
             config.display.displaymode = meshtastic_Config_DisplayConfig_DisplayMode_COLOR;
             config.bluetooth.enabled = false;
             service->reloadConfig(SEGMENT_CONFIG);
@@ -677,68 +768,71 @@ void menuHandler::TFTColorPickerMenu(OLEDDisplay *display)
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsCount = 10;
     bannerOptions.bannerCallback = [display](int selected) -> void {
-        uint8_t r = 0;
+#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || defined(T_DECK) || HAS_TFT
-        uint8_t g = 0;
+        uint8_t TFT_MESH_r = 0;
-        uint8_t b = 0;
+        uint8_t TFT_MESH_g = 0;
+        uint8_t TFT_MESH_b = 0;
         if (selected == 1) {
             LOG_INFO("Setting color to system default or defined variant");
             // Given just before we set all these to zero, we will allow this to go through
         } else if (selected == 2) {
             LOG_INFO("Setting color to Meshtastic Green");
-            r = 103;
+            TFT_MESH_r = 103;
-            g = 234;
+            TFT_MESH_g = 234;
-            b = 148;
+            TFT_MESH_b = 148;
         } else if (selected == 3) {
             LOG_INFO("Setting color to Yellow");
-            r = 255;
+            TFT_MESH_r = 255;
-            g = 255;
+            TFT_MESH_g = 255;
-            b = 128;
+            TFT_MESH_b = 128;
         } else if (selected == 4) {
             LOG_INFO("Setting color to Red");
-            r = 255;
+            TFT_MESH_r = 255;
-            g = 64;
+            TFT_MESH_g = 64;
-            b = 64;
+            TFT_MESH_b = 64;
         } else if (selected == 5) {
             LOG_INFO("Setting color to Orange");
-            r = 255;
+            TFT_MESH_r = 255;
-            g = 160;
+            TFT_MESH_g = 160;
-            b = 20;
+            TFT_MESH_b = 20;
         } else if (selected == 6) {
             LOG_INFO("Setting color to Purple");
-            r = 204;
+            TFT_MESH_r = 204;
-            g = 153;
+            TFT_MESH_g = 153;
-            b = 255;
+            TFT_MESH_b = 255;
         } else if (selected == 7) {
             LOG_INFO("Setting color to Teal");
-            r = 64;
+            TFT_MESH_r = 64;
-            g = 224;
+            TFT_MESH_g = 224;
-            b = 208;
+            TFT_MESH_b = 208;
         } else if (selected == 8) {
             LOG_INFO("Setting color to Pink");
-            r = 255;
+            TFT_MESH_r = 255;
-            g = 105;
+            TFT_MESH_g = 105;
-            b = 180;
+            TFT_MESH_b = 180;
         } else if (selected == 9) {
             LOG_INFO("Setting color to White");
-            r = 255;
+            TFT_MESH_r = 255;
-            g = 255;
+            TFT_MESH_g = 255;
-            b = 255;
+            TFT_MESH_b = 255;
+        } else {
+            menuQueue = system_base_menu;
+            screen->runNow();
         }
 
-#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || HAS_TFT
         if (selected != 0) {
             display->setColor(BLACK);
             display->fillRect(0, 0, SCREEN_WIDTH, SCREEN_HEIGHT);
             display->setColor(WHITE);
 
-            if (r == 0 && g == 0 && b == 0) {
+            if (TFT_MESH_r == 0 && TFT_MESH_g == 0 && TFT_MESH_b == 0) {
 #ifdef TFT_MESH_OVERRIDE
                 TFT_MESH = TFT_MESH_OVERRIDE;
 #else
                 TFT_MESH = COLOR565(0x67, 0xEA, 0x94);
 #endif
             } else {
-                TFT_MESH = COLOR565(r, g, b);
+                TFT_MESH = COLOR565(TFT_MESH_r, TFT_MESH_g, TFT_MESH_b);
             }
 
 #if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190)
@@ -746,13 +840,13 @@ void menuHandler::TFTColorPickerMenu(OLEDDisplay *display)
 #endif
 
             screen->setFrames(graphics::Screen::FOCUS_SYSTEM);
-            if (r == 0 && g == 0 && b == 0) {
+            if (TFT_MESH_r == 0 && TFT_MESH_g == 0 && TFT_MESH_b == 0) {
                 uiconfig.screen_rgb_color = 0;
             } else {
-                uiconfig.screen_rgb_color = (r << 16) | (g << 8) | b;
+                uiconfig.screen_rgb_color = (TFT_MESH_r << 16) | (TFT_MESH_g << 8) | TFT_MESH_b;
             }
             LOG_INFO("Storing Value of %d to uiconfig.screen_rgb_color", uiconfig.screen_rgb_color);
-            nodeDB->saveProto("/prefs/uiconfig.proto", meshtastic_DeviceUIConfig_size, &meshtastic_DeviceUIConfig_msg, &uiconfig);
+            saveUIConfig();
         }
 #endif
     };
@@ -771,6 +865,28 @@ void menuHandler::rebootMenu()
             IF_SCREEN(screen->showSimpleBanner("Rebooting...", 0));
             nodeDB->saveToDisk();
             rebootAtMsec = millis() + DEFAULT_REBOOT_SECONDS * 1000;
+        } else {
+            menuQueue = power_menu;
+            screen->runNow();
+        }
+    };
+    screen->showOverlayBanner(bannerOptions);
+}
+
+void menuHandler::shutdownMenu()
+{
+    static const char *optionsArray[] = {"Back", "Confirm"};
+    BannerOverlayOptions bannerOptions;
+    bannerOptions.message = "Shutdown Device?";
+    bannerOptions.optionsArrayPtr = optionsArray;
+    bannerOptions.optionsCount = 2;
+    bannerOptions.bannerCallback = [](int selected) -> void {
+        if (selected == 1) {
+            InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_SHUTDOWN, .kbchar = 0, .touchX = 0, .touchY = 0};
+            inputBroker->injectInputEvent(&event);
+        } else {
+            menuQueue = power_menu;
+            screen->runNow();
         }
     };
     screen->showOverlayBanner(bannerOptions);
@@ -778,7 +894,7 @@ void menuHandler::rebootMenu()
 
 void menuHandler::addFavoriteMenu()
 {
-    screen->showNodePicker("Node To Favorite", 30000, [](int nodenum) -> void {
+    screen->showNodePicker("Node To Favorite", 30000, [](uint32_t nodenum) -> void {
         LOG_WARN("Nodenum: %u", nodenum);
         nodeDB->set_favorite(true, nodenum);
         screen->setFrames(graphics::Screen::FOCUS_PRESERVE);
@@ -800,13 +916,24 @@ void menuHandler::removeFavoriteMenu()
     bannerOptions.optionsCount = 2;
     bannerOptions.bannerCallback = [](int selected) -> void {
         if (selected == 1) {
+            LOG_INFO("Removing %x as favorite node", graphics::UIRenderer::currentFavoriteNodeNum);
             nodeDB->set_favorite(false, graphics::UIRenderer::currentFavoriteNodeNum);
-            screen->setFrames(graphics::Screen::FOCUS_PRESERVE);
+            screen->setFrames(graphics::Screen::FOCUS_DEFAULT);
         }
     };
     screen->showOverlayBanner(bannerOptions);
 }
 
+void menuHandler::traceRouteMenu()
+{
+    screen->showNodePicker("Node to Trace", 30000, [](uint32_t nodenum) -> void {
+        LOG_INFO("Menu: Node picker selected node 0x%08x, traceRouteModule=%p", nodenum, traceRouteModule);
+        if (traceRouteModule) {
+            traceRouteModule->startTraceRoute(nodenum);
+        }
+    });
+}
+
 void menuHandler::testMenu()
 {
 
@@ -869,6 +996,153 @@ void menuHandler::wifiToggleMenu()
     screen->showOverlayBanner(bannerOptions);
 }
 
+void menuHandler::notificationsMenu()
+{
+    enum optionsNumbers { Back, BuzzerActions };
+    static const char *optionsArray[] = {"Back", "Buzzer Actions"};
+    static int optionsEnumArray[] = {Back, BuzzerActions};
+    int options = 2;
+
+    BannerOverlayOptions bannerOptions;
+    bannerOptions.message = "Notifications";
+    bannerOptions.optionsArrayPtr = optionsArray;
+    bannerOptions.optionsCount = options;
+    bannerOptions.optionsEnumPtr = optionsEnumArray;
+    bannerOptions.bannerCallback = [](int selected) -> void {
+        if (selected == BuzzerActions) {
+            menuHandler::menuQueue = menuHandler::buzzermodemenupicker;
+            screen->runNow();
+        } else {
+            menuQueue = system_base_menu;
+            screen->runNow();
+        }
+    };
+    screen->showOverlayBanner(bannerOptions);
+}
+
+void menuHandler::screenOptionsMenu()
+{
+    // Check if brightness is supported
+    bool hasSupportBrightness = false;
+#if defined(ST7789_CS) || defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) || defined(USE_SH1107)
+    hasSupportBrightness = true;
+#endif
+
+#if defined(T_DECK)
+    // TDeck Doesn't seem to support brightness at all, at least not reliably
+    hasSupportBrightness = false;
+#endif
+
+    enum optionsNumbers { Back, Brightness, ScreenColor };
+    static const char *optionsArray[4] = {"Back"};
+    static int optionsEnumArray[4] = {Back};
+    int options = 1;
+
+    // Only show brightness for B&W displays
+    if (hasSupportBrightness) {
+        optionsArray[options] = "Brightness";
+        optionsEnumArray[options++] = Brightness;
+    }
+
+    // Only show screen color for TFT displays
+#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || defined(T_DECK) || HAS_TFT
+    optionsArray[options] = "Screen Color";
+    optionsEnumArray[options++] = ScreenColor;
+#endif
+
+    BannerOverlayOptions bannerOptions;
+    bannerOptions.message = "Screen Options";
+    bannerOptions.optionsArrayPtr = optionsArray;
+    bannerOptions.optionsCount = options;
+    bannerOptions.optionsEnumPtr = optionsEnumArray;
+    bannerOptions.bannerCallback = [](int selected) -> void {
+        if (selected == Brightness) {
+            menuHandler::menuQueue = menuHandler::brightness_picker;
+            screen->runNow();
+        } else if (selected == ScreenColor) {
+            menuHandler::menuQueue = menuHandler::tftcolormenupicker;
+            screen->runNow();
+        } else {
+            menuQueue = system_base_menu;
+            screen->runNow();
+        }
+    };
+    screen->showOverlayBanner(bannerOptions);
+}
+
+void menuHandler::powerMenu()
+{
+
+    enum optionsNumbers { Back, Reboot, Shutdown, MUI };
+    static const char *optionsArray[4] = {"Back"};
+    static int optionsEnumArray[4] = {Back};
+    int options = 1;
+
+    optionsArray[options] = "Reboot";
+    optionsEnumArray[options++] = Reboot;
+
+    optionsArray[options] = "Shutdown";
+    optionsEnumArray[options++] = Shutdown;
+
+#if HAS_TFT
+    optionsArray[options] = "Switch to MUI";
+    optionsEnumArray[options++] = MUI;
+#endif
+
+    BannerOverlayOptions bannerOptions;
+    bannerOptions.message = "Reboot / Shutdown";
+    bannerOptions.optionsArrayPtr = optionsArray;
+    bannerOptions.optionsCount = options;
+    bannerOptions.optionsEnumPtr = optionsEnumArray;
+    bannerOptions.bannerCallback = [](int selected) -> void {
+        if (selected == Reboot) {
+            menuHandler::menuQueue = menuHandler::reboot_menu;
+            screen->runNow();
+        } else if (selected == Shutdown) {
+            menuHandler::menuQueue = menuHandler::shutdown_menu;
+            screen->runNow();
+        } else if (selected == MUI) {
+            menuHandler::menuQueue = menuHandler::mui_picker;
+            screen->runNow();
+        } else {
+            menuQueue = system_base_menu;
+            screen->runNow();
+        }
+    };
+    screen->showOverlayBanner(bannerOptions);
+}
+
+void menuHandler::keyVerificationInitMenu()
+{
+    screen->showNodePicker("Node to Verify", 30000,
+                           [](uint32_t selected) -> void { keyVerificationModule->sendInitialRequest(selected); });
+}
+
+void menuHandler::keyVerificationFinalPrompt()
+{
+    char message[40] = {0};
+    memset(message, 0, sizeof(message));
+    sprintf(message, "Verification: \n");
+    keyVerificationModule->generateVerificationCode(message + 15); // send the toPhone packet
+
+    if (screen) {
+        static const char *optionsArray[] = {"Reject", "Accept"};
+        graphics::BannerOverlayOptions options;
+        options.message = message;
+        options.durationMs = 30000;
+        options.optionsArrayPtr = optionsArray;
+        options.optionsCount = 2;
+        options.notificationType = graphics::notificationTypeEnum::selection_picker;
+        options.bannerCallback = [=](int selected) {
+            if (selected == 1) {
+                auto remoteNodePtr = nodeDB->getMeshNode(keyVerificationModule->getCurrentRemoteNode());
+                remoteNodePtr->bitfield |= NODEINFO_BITFIELD_IS_KEY_MANUALLY_VERIFIED_MASK;
+            }
+        };
+        screen->showOverlayBanner(options);
+    }
+}
+
 void menuHandler::handleMenuSwitch(OLEDDisplay *display)
 {
     if (menuQueue != menu_none)
@@ -879,6 +1153,9 @@ void menuHandler::handleMenuSwitch(OLEDDisplay *display)
     case lora_picker:
         LoraRegionPicker();
         break;
+    case no_timeout_lora_picker:
+        LoraRegionPicker(0);
+        break;
     case TZ_picker:
         TZPicker();
         break;
@@ -891,6 +1168,9 @@ void menuHandler::handleMenuSwitch(OLEDDisplay *display)
     case clock_menu:
         clockMenu();
         break;
+    case system_base_menu:
+        systemBaseMenu();
+        break;
     case position_base_menu:
         positionBaseMenu();
         break;
@@ -920,12 +1200,18 @@ void menuHandler::handleMenuSwitch(OLEDDisplay *display)
     case reboot_menu:
         rebootMenu();
         break;
+    case shutdown_menu:
+        shutdownMenu();
+        break;
     case add_favorite:
         addFavoriteMenu();
         break;
     case remove_favorite:
         removeFavoriteMenu();
         break;
+    case trace_route_menu:
+        traceRouteMenu();
+        break;
     case test_menu:
         testMenu();
         break;
@@ -935,10 +1221,36 @@ void menuHandler::handleMenuSwitch(OLEDDisplay *display)
     case wifi_toggle_menu:
         wifiToggleMenu();
         break;
+    case key_verification_init:
+        keyVerificationInitMenu();
+        break;
+    case key_verification_final_prompt:
+        keyVerificationFinalPrompt();
+        break;
+    case bluetooth_toggle_menu:
+        BluetoothToggleMenu();
+        break;
+    case notifications_menu:
+        notificationsMenu();
+        break;
+    case screen_options_menu:
+        screenOptionsMenu();
+        break;
+    case power_menu:
+        powerMenu();
+        break;
+    case throttle_message:
+        screen->showSimpleBanner("Too Many Attempts\nTry again in 60 seconds.", 5000);
+        break;
     }
     menuQueue = menu_none;
 }
 
+void menuHandler::saveUIConfig()
+{
+    nodeDB->saveProto("/prefs/uiconfig.proto", meshtastic_DeviceUIConfig_size, &meshtastic_DeviceUIConfig_msg, &uiconfig);
+}
+
 } // namespace graphics
 
 #endif

src/graphics/draw/MenuHandler.h

@@ -1,3 +1,5 @@
+#pragma once
+#if HAS_SCREEN
 #include "configuration.h"
 namespace graphics
 {
@@ -8,6 +10,7 @@ class menuHandler
     enum screenMenus {
         menu_none,
         lora_picker,
+        no_timeout_lora_picker,
         TZ_picker,
         twelve_hour_picker,
         clock_face_picker,
@@ -21,22 +24,35 @@ class menuHandler
         tftcolormenupicker,
         brightness_picker,
         reboot_menu,
+        shutdown_menu,
         add_favorite,
         remove_favorite,
         test_menu,
         number_test,
-        wifi_toggle_menu
+        wifi_toggle_menu,
+        bluetooth_toggle_menu,
+        notifications_menu,
+        screen_options_menu,
+        power_menu,
+        system_base_menu,
+        key_verification_init,
+        key_verification_final_prompt,
+        trace_route_menu,
+        throttle_message,
     };
     static screenMenus menuQueue;
 
+    static void OnboardMessage();
     static void LoraRegionPicker(uint32_t duration = 30000);
     static void handleMenuSwitch(OLEDDisplay *display);
+    static void showConfirmationBanner(const char *message, std::function<void()> onConfirm);
     static void clockMenu();
     static void TZPicker();
     static void TwelveHourPicker();
     static void ClockFacePicker();
     static void messageResponseMenu();
     static void homeBaseMenu();
+    static void textMessageBaseMenu();
     static void systemBaseMenu();
     static void favoriteBaseMenu();
     static void positionBaseMenu();
@@ -49,12 +65,24 @@ class menuHandler
     static void resetNodeDBMenu();
     static void BrightnessPickerMenu();
     static void rebootMenu();
+    static void shutdownMenu();
     static void addFavoriteMenu();
     static void removeFavoriteMenu();
+    static void traceRouteMenu();
     static void testMenu();
     static void numberTest();
     static void wifiBaseMenu();
     static void wifiToggleMenu();
+    static void notificationsMenu();
+    static void screenOptionsMenu();
+    static void powerMenu();
+
+  private:
+    static void saveUIConfig();
+    static void keyVerificationInitMenu();
+    static void keyVerificationFinalPrompt();
+    static void BluetoothToggleMenu();
 };
 
-} // namespace graphics
+} // namespace graphics
+#endif

src/graphics/draw/MessageRenderer.cpp

@@ -137,7 +137,11 @@ void drawStringWithEmotes(OLEDDisplay *display, int x, int y, const std::string
                 display->drawString(cursorX + 1, fontY, textChunk.c_str());
             }
             display->drawString(cursorX, fontY, textChunk.c_str());
+#if defined(OLED_UA) || defined(OLED_RU)
+            cursorX += display->getStringWidth(textChunk.c_str(), textChunk.length(), true);
+#else
             cursorX += display->getStringWidth(textChunk.c_str());
+#endif
             i = nextControl;
             continue;
         }
@@ -155,7 +159,12 @@ void drawStringWithEmotes(OLEDDisplay *display, int x, int y, const std::string
                 display->drawString(cursorX + 1, fontY, remaining.c_str());
             }
             display->drawString(cursorX, fontY, remaining.c_str());
+#if defined(OLED_UA) || defined(OLED_RU)
+            cursorX += display->getStringWidth(remaining.c_str(), remaining.length(), true);
+#else
             cursorX += display->getStringWidth(remaining.c_str());
+#endif
+
             break;
         }
     }
@@ -273,7 +282,7 @@ void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
     currentKey ^= ((size_t)mp.id << 24);
 
     if (cachedKey != currentKey) {
-        LOG_INFO("Message cache key is misssed cachedKey=0x%0x, currentKey=0x%x", cachedKey, currentKey);
+        LOG_INFO("Onscreen message scroll cache key needs updating: cachedKey=0x%0x, currentKey=0x%x", cachedKey, currentKey);
 
         // Cache miss - regenerate lines and heights
         cachedLines = generateLines(display, headerStr, messageBuf, textWidth);
@@ -374,10 +383,16 @@ std::vector<std::string> generateLines(OLEDDisplay *display, const char *headerS
         } else {
             word += ch;
             std::string test = line + word;
-            // Keep these lines for diagnostics
+// Keep these lines for diagnostics
-            // LOG_INFO("Char: '%c' (0x%02X)", ch, (unsigned char)ch);
+// LOG_INFO("Char: '%c' (0x%02X)", ch, (unsigned char)ch);
-            // LOG_INFO("Current String: %s", test.c_str());
+// LOG_INFO("Current String: %s", test.c_str());
-            if (display->getStringWidth(test.c_str()) > textWidth) {
+// Note: there are boolean comparison uint16 (getStringWidth) with int (textWidth), hope textWidth is always positive :)
+#if defined(OLED_UA) || defined(OLED_RU)
+            uint16_t strWidth = display->getStringWidth(test.c_str(), test.length(), true);
+#else
+            uint16_t strWidth = display->getStringWidth(test.c_str());
+#endif
+            if (strWidth > textWidth) {
                 if (!line.empty())
                     lines.push_back(line);
                 line = word;

src/graphics/draw/NotificationRenderer.cpp

@@ -26,7 +26,7 @@ extern bool hasUnreadMessage;
 namespace graphics
 {
 
-char NotificationRenderer::inEvent = INPUT_BROKER_NONE;
+InputEvent NotificationRenderer::inEvent;
 int8_t NotificationRenderer::curSelected = 0;
 char NotificationRenderer::alertBannerMessage[256] = {0};
 uint32_t NotificationRenderer::alertBannerUntil = 0;  // 0 is a special case meaning forever
@@ -42,7 +42,7 @@ uint32_t NotificationRenderer::currentNumber = 0;
 uint32_t pow_of_10(uint32_t n)
 {
     uint32_t ret = 1;
-    for (int i = 0; i < n; i++) {
+    for (uint32_t i = 0; i < n; i++) {
         ret *= 10;
     }
     return ret;
@@ -72,14 +72,31 @@ void NotificationRenderer::resetBanner()
 {
     alertBannerMessage[0] = '\0';
     current_notification_type = notificationTypeEnum::none;
+
+    inEvent.inputEvent = INPUT_BROKER_NONE;
+    inEvent.kbchar = 0;
+    curSelected = 0;
+    alertBannerOptions = 0; // last x lines are seelctable options
+    optionsArrayPtr = nullptr;
+    optionsEnumPtr = nullptr;
+    alertBannerCallback = NULL;
+    pauseBanner = false;
+    numDigits = 0;
+    currentNumber = 0;
+
     nodeDB->pause_sort(false);
 }
 
 void NotificationRenderer::drawBannercallback(OLEDDisplay *display, OLEDDisplayUiState *state)
 {
+    if (!isOverlayBannerShowing() && alertBannerMessage[0] != '\0')
+        resetBanner();
     if (!isOverlayBannerShowing() || pauseBanner)
         return;
     switch (current_notification_type) {
+    case notificationTypeEnum::none:
+        // Do nothing - no notification to display
+        break;
     case notificationTypeEnum::text_banner:
     case notificationTypeEnum::selection_picker:
         drawAlertBannerOverlay(display, state);
@@ -112,31 +129,40 @@ void NotificationRenderer::drawNumberPicker(OLEDDisplay *display, OLEDDisplayUiS
     // modulo to extract
     uint8_t this_digit = (currentNumber % (pow_of_10(numDigits - curSelected))) / (pow_of_10(numDigits - curSelected - 1));
     // Handle input
-    if (inEvent == INPUT_BROKER_UP || inEvent == INPUT_BROKER_ALT_PRESS) {
+    if (inEvent.inputEvent == INPUT_BROKER_UP || inEvent.inputEvent == INPUT_BROKER_ALT_PRESS) {
         if (this_digit == 9) {
             currentNumber -= 9 * (pow_of_10(numDigits - curSelected - 1));
         } else {
             currentNumber += (pow_of_10(numDigits - curSelected - 1));
         }
-    } else if (inEvent == INPUT_BROKER_DOWN || inEvent == INPUT_BROKER_USER_PRESS) {
+    } else if (inEvent.inputEvent == INPUT_BROKER_DOWN || inEvent.inputEvent == INPUT_BROKER_USER_PRESS) {
         if (this_digit == 0) {
             currentNumber += 9 * (pow_of_10(numDigits - curSelected - 1));
         } else {
             currentNumber -= (pow_of_10(numDigits - curSelected - 1));
         }
-    } else if (inEvent == INPUT_BROKER_SELECT || inEvent == INPUT_BROKER_RIGHT) {
+    } else if (inEvent.inputEvent == INPUT_BROKER_ANYKEY) {
+        if (inEvent.kbchar > 47 && inEvent.kbchar < 58) { // have a digit
+            currentNumber -= this_digit * (pow_of_10(numDigits - curSelected - 1));
+            currentNumber += (inEvent.kbchar - 48) * (pow_of_10(numDigits - curSelected - 1));
+            curSelected++;
+        }
+    } else if (inEvent.inputEvent == INPUT_BROKER_SELECT || inEvent.inputEvent == INPUT_BROKER_RIGHT) {
         curSelected++;
-    } else if (inEvent == INPUT_BROKER_LEFT) {
+    } else if (inEvent.inputEvent == INPUT_BROKER_LEFT) {
         curSelected--;
-    } else if ((inEvent == INPUT_BROKER_CANCEL || inEvent == INPUT_BROKER_ALT_LONG) && alertBannerUntil != 0) {
+    } else if ((inEvent.inputEvent == INPUT_BROKER_CANCEL || inEvent.inputEvent == INPUT_BROKER_ALT_LONG) &&
+               alertBannerUntil != 0) {
         resetBanner();
+        return;
     }
-    if (curSelected == numDigits) {
+    if (curSelected == static_cast<int8_t>(numDigits)) {
-        resetBanner();
         alertBannerCallback(currentNumber);
+        resetBanner();
+        return;
     }
 
-    inEvent = INPUT_BROKER_NONE;
+    inEvent.inputEvent = INPUT_BROKER_NONE;
     if (alertBannerMessage[0] == '\0')
         return;
 
@@ -144,12 +170,12 @@ void NotificationRenderer::drawNumberPicker(OLEDDisplay *display, OLEDDisplayUiS
     const char *linePointers[totalLines + 1] = {0}; // this is sort of a dynamic allocation
 
     // copy the linestarts to display to the linePointers holder
-    for (int i = 0; i < lineCount; i++) {
+    for (uint16_t i = 0; i < lineCount; i++) {
         linePointers[i] = lineStarts[i];
     }
     std::string digits = " ";
     std::string arrowPointer = " ";
-    for (int i = 0; i < numDigits; i++) {
+    for (uint16_t i = 0; i < numDigits; i++) {
         // Modulo minus modulo to return just the current number
         digits += std::to_string((currentNumber % (pow_of_10(numDigits - i))) / (pow_of_10(numDigits - i - 1))) + " ";
         if (curSelected == i) {
@@ -190,16 +216,18 @@ void NotificationRenderer::drawNodePicker(OLEDDisplay *display, OLEDDisplayUiSta
     }
 
     // Handle input
-    if (inEvent == INPUT_BROKER_UP || inEvent == INPUT_BROKER_ALT_PRESS) {
+    if (inEvent.inputEvent == INPUT_BROKER_UP || inEvent.inputEvent == INPUT_BROKER_ALT_PRESS) {
         curSelected--;
-    } else if (inEvent == INPUT_BROKER_DOWN || inEvent == INPUT_BROKER_USER_PRESS) {
+    } else if (inEvent.inputEvent == INPUT_BROKER_DOWN || inEvent.inputEvent == INPUT_BROKER_USER_PRESS) {
         curSelected++;
-    } else if (inEvent == INPUT_BROKER_SELECT) {
+    } else if (inEvent.inputEvent == INPUT_BROKER_SELECT) {
-        resetBanner();
         alertBannerCallback(selectedNodenum);
-
-    } else if ((inEvent == INPUT_BROKER_CANCEL || inEvent == INPUT_BROKER_ALT_LONG) && alertBannerUntil != 0) {
         resetBanner();
+        return;
+    } else if ((inEvent.inputEvent == INPUT_BROKER_CANCEL || inEvent.inputEvent == INPUT_BROKER_ALT_LONG) &&
+               alertBannerUntil != 0) {
+        resetBanner();
+        return;
     }
 
     if (curSelected == -1)
@@ -207,7 +235,7 @@ void NotificationRenderer::drawNodePicker(OLEDDisplay *display, OLEDDisplayUiSta
     if (curSelected == alertBannerOptions)
         curSelected = 0;
 
-    inEvent = INPUT_BROKER_NONE;
+    inEvent.inputEvent = INPUT_BROKER_NONE;
     if (alertBannerMessage[0] == '\0')
         return;
 
@@ -305,11 +333,11 @@ void NotificationRenderer::drawAlertBannerOverlay(OLEDDisplay *display, OLEDDisp
 
     // Handle input
     if (alertBannerOptions > 0) {
-        if (inEvent == INPUT_BROKER_UP || inEvent == INPUT_BROKER_ALT_PRESS) {
+        if (inEvent.inputEvent == INPUT_BROKER_UP || inEvent.inputEvent == INPUT_BROKER_ALT_PRESS) {
             curSelected--;
-        } else if (inEvent == INPUT_BROKER_DOWN || inEvent == INPUT_BROKER_USER_PRESS) {
+        } else if (inEvent.inputEvent == INPUT_BROKER_DOWN || inEvent.inputEvent == INPUT_BROKER_USER_PRESS) {
             curSelected++;
-        } else if (inEvent == INPUT_BROKER_SELECT) {
+        } else if (inEvent.inputEvent == INPUT_BROKER_SELECT) {
             if (optionsEnumPtr != nullptr) {
                 alertBannerCallback(optionsEnumPtr[curSelected]);
                 optionsEnumPtr = nullptr;
@@ -317,8 +345,11 @@ void NotificationRenderer::drawAlertBannerOverlay(OLEDDisplay *display, OLEDDisp
                 alertBannerCallback(curSelected);
             }
             resetBanner();
-        } else if ((inEvent == INPUT_BROKER_CANCEL || inEvent == INPUT_BROKER_ALT_LONG) && alertBannerUntil != 0) {
+            return;
+        } else if ((inEvent.inputEvent == INPUT_BROKER_CANCEL || inEvent.inputEvent == INPUT_BROKER_ALT_LONG) &&
+                   alertBannerUntil != 0) {
             resetBanner();
+            return;
         }
 
         if (curSelected == -1)
@@ -326,12 +357,14 @@ void NotificationRenderer::drawAlertBannerOverlay(OLEDDisplay *display, OLEDDisp
         if (curSelected == alertBannerOptions)
             curSelected = 0;
     } else {
-        if (inEvent == INPUT_BROKER_SELECT || inEvent == INPUT_BROKER_ALT_LONG || inEvent == INPUT_BROKER_CANCEL) {
+        if (inEvent.inputEvent == INPUT_BROKER_SELECT || inEvent.inputEvent == INPUT_BROKER_ALT_LONG ||
+            inEvent.inputEvent == INPUT_BROKER_CANCEL) {
             resetBanner();
+            return;
         }
     }
 
-    inEvent = INPUT_BROKER_NONE;
+    inEvent.inputEvent = INPUT_BROKER_NONE;
     if (alertBannerMessage[0] == '\0')
         return;
 
@@ -350,7 +383,9 @@ void NotificationRenderer::drawAlertBannerOverlay(OLEDDisplay *display, OLEDDisp
 
     uint8_t firstOptionToShow = 0;
     if (alertBannerOptions > 0) {
-        if (curSelected > 1 && alertBannerOptions > visibleTotalLines - lineCount) {
+        if (visibleTotalLines - lineCount == 1) {
+            firstOptionToShow = curSelected;
+        } else if (curSelected > 1 && alertBannerOptions > visibleTotalLines - lineCount) {
             if (curSelected > alertBannerOptions - visibleTotalLines + lineCount)
                 firstOptionToShow = alertBannerOptions - visibleTotalLines + lineCount;
             else
@@ -359,6 +394,9 @@ void NotificationRenderer::drawAlertBannerOverlay(OLEDDisplay *display, OLEDDisp
             firstOptionToShow = 0;
         }
     }
+    // Useful log line for troubleshooting:
+    /* LOG_WARN("alertBannerOptions: %u, curSelected: %u, visibleTotalLines: %u, lineCount: %u, firstOptionToShow: %u",
+             alertBannerOptions, curSelected, visibleTotalLines, lineCount, firstOptionToShow); */
 
     for (int i = firstOptionToShow; i < alertBannerOptions && linesShown < visibleTotalLines; i++, linesShown++) {
         if (i == curSelected) {

src/graphics/draw/NotificationRenderer.h

@@ -11,7 +11,8 @@ namespace graphics
 class NotificationRenderer
 {
   public:
-    static char inEvent;
+    static InputEvent inEvent;
+    static char inKeypress;
     static int8_t curSelected;
     static char alertBannerMessage[256];
     static uint32_t alertBannerUntil; // 0 is a special case meaning forever

src/graphics/draw/UIRenderer.cpp

@@ -24,6 +24,23 @@ extern graphics::Screen *screen;
 namespace graphics
 {
 NodeNum UIRenderer::currentFavoriteNodeNum = 0;
+std::vector<meshtastic_NodeInfoLite *> graphics::UIRenderer::favoritedNodes;
+
+void graphics::UIRenderer::rebuildFavoritedNodes()
+{
+    favoritedNodes.clear();
+    size_t total = nodeDB->getNumMeshNodes();
+    for (size_t i = 0; i < total; i++) {
+        meshtastic_NodeInfoLite *n = nodeDB->getMeshNodeByIndex(i);
+        if (!n || n->num == nodeDB->getNodeNum())
+            continue;
+        if (n->is_favorite)
+            favoritedNodes.push_back(n);
+    }
+
+    std::sort(favoritedNodes.begin(), favoritedNodes.end(),
+              [](const meshtastic_NodeInfoLite *a, const meshtastic_NodeInfoLite *b) { return a->num < b->num; });
+}
 
 #if !MESHTASTIC_EXCLUDE_GPS
 // GeoCoord object for coordinate conversions
@@ -201,27 +218,7 @@ void UIRenderer::drawNodes(OLEDDisplay *display, int16_t x, int16_t y, const mes
 // **********************
 void UIRenderer::drawNodeInfo(OLEDDisplay *display, const OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
-    // --- Cache favorite nodes for the current frame only, to save computation ---
-    static std::vector<meshtastic_NodeInfoLite *> favoritedNodes;
-    static int prevFrame = -1;
 
-    // --- Only rebuild favorites list if we're on a new frame ---
-    if (state->currentFrame != prevFrame) {
-        prevFrame = state->currentFrame;
-        favoritedNodes.clear();
-        size_t total = nodeDB->getNumMeshNodes();
-        for (size_t i = 0; i < total; i++) {
-            meshtastic_NodeInfoLite *n = nodeDB->getMeshNodeByIndex(i);
-            // Skip nulls and ourself
-            if (!n || n->num == nodeDB->getNodeNum())
-                continue;
-            if (n->is_favorite)
-                favoritedNodes.push_back(n);
-        }
-        // Keep a stable, consistent display order
-        std::sort(favoritedNodes.begin(), favoritedNodes.end(),
-                  [](const meshtastic_NodeInfoLite *a, const meshtastic_NodeInfoLite *b) { return a->num < b->num; });
-    }
     if (favoritedNodes.empty())
         return;
 
@@ -657,7 +654,7 @@ void UIRenderer::drawDeviceFocused(OLEDDisplay *display, OLEDDisplayUiState *sta
 
     char combinedName[50];
     snprintf(combinedName, sizeof(combinedName), "%s (%s)", longNameStr.empty() ? "" : longNameStr.c_str(), shortnameble);
-    if (SCREEN_WIDTH - (display->getStringWidth(longName) + display->getStringWidth(shortnameble)) > 10) {
+    if (SCREEN_WIDTH - (display->getStringWidth(combinedName)) > 10) {
         size_t len = strlen(combinedName);
         if (len >= 3 && strcmp(combinedName + len - 3, " ()") == 0) {
             combinedName[len - 3] = '\0'; // Remove the last three characters
@@ -668,7 +665,7 @@ void UIRenderer::drawDeviceFocused(OLEDDisplay *display, OLEDDisplayUiState *sta
             nameX, ((rows == 4) ? getTextPositions(display)[line++] : getTextPositions(display)[line++]) + yOffset, combinedName);
     } else {
         // === LongName Centered ===
-        textWidth = display->getStringWidth(longName);
+        textWidth = display->getStringWidth(longNameStr.c_str());
         nameX = (SCREEN_WIDTH - textWidth) / 2;
         display->drawString(nameX, getTextPositions(display)[line++], longNameStr.c_str());
 

src/graphics/draw/UIRenderer.h

@@ -61,6 +61,8 @@ class UIRenderer
     static void drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
 
     static NodeNum currentFavoriteNodeNum;
+    static std::vector<meshtastic_NodeInfoLite *> favoritedNodes;
+    static void rebuildFavoritedNodes();
 
 // OEM screens
 #ifdef USERPREFS_OEM_TEXT

src/graphics/fonts/EinkDisplayFonts.cpp

@@ -1,3 +1,5 @@
+#ifdef USE_EINK
+
 #include "EinkDisplayFonts.h"
 
 // Created by https://oleddisplay.squix.ch/ Consider a donation
@@ -1182,3 +1184,5 @@ const uint8_t Monospaced_plain_30[] PROGMEM = {
     0xF0, 0xFF, 0x01, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x00, 0x00, 0xF0, 0x0F, 0x00, 0xE0, 0x00, 0xFE, 0x03, 0x00, 0xE0, 0x80, 0x7F,
     0x00, 0x00, 0xE0, 0xE0, 0x1F, 0x00, 0x00, 0x00, 0xF0, 0x03, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x10 // 255
 };
+
+#endif // USE_EINK

src/graphics/fonts/EinkDisplayFonts.h

@@ -1,6 +1,8 @@
 #ifndef EINKDISPLAYFONTS_h
 #define EINKDISPLAYFONTS_h
 
+#ifdef USE_EINK
+
 #ifdef ARDUINO
 #include <Arduino.h>
 #elif __MBED__
@@ -11,4 +13,7 @@
  * Monospaced Plain 30
  */
 extern const uint8_t Monospaced_plain_30[] PROGMEM;
+
+#endif // USE_EINK
+
 #endif

src/graphics/fonts/OLEDDisplayFontsCS.cpp

@@ -1,3 +1,5 @@
+#ifdef OLED_CS
+
 #include "OLEDDisplayFontsCS.h"
 
 // Font generated or edited with the glyphEditor
@@ -1860,4 +1862,6 @@ const uint8_t ArialMT_Plain_24_CS[] PROGMEM = {
     0x00, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x06, 0xC0, 0xF0, 0x01, 0x06, 0xC0, 0x80, 0x0F, 0x07, 0x00,
     0x00, 0xFE, 0x03, 0x00, 0x00, 0xFC, 0x00, 0xC0, 0xC0, 0x1F, 0x00, 0xC0, 0xF8, 0x03, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00,
     0x06, // 255
-};
+};
+
+#endif // OLED_CS

src/graphics/fonts/OLEDDisplayFontsPL.cpp

@@ -1,4 +1,5 @@
 // trunk-ignore-all(clang-format): Preserve long lines
+#ifdef OLED_PL
 #include "OLEDDisplayFontsPL.h"
 
 const uint8_t ArialMT_Plain_10_PL[] PROGMEM = {
@@ -1310,4 +1311,6 @@ const uint8_t ArialMT_Plain_24_PL[] PROGMEM = {
     0x00, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x06, 0x00, 0xF0, 0x01, 0x06, 0x00, 0x80, 0x0F, 0x07, 0x80, 0x00, 0xFE, 0x03, 0xE0, 0x00, 0xFC, 0x00, 0x60, 0xC0, 0x1F, 0x00, 0x20, 0xF8, 0x03, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x06, // 253
     0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0xFF, 0x07, 0xE0, 0xFF, 0xFF, 0x07, 0x00, 0x1C, 0x18, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x0E, 0x38, 0x00, 0x00, 0x1C, 0x1C, 0x00, 0x00, 0xF8, 0x0F, 0x00, 0x00, 0xF0, 0x03, // 254
     0x00, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x06, 0xC0, 0xF0, 0x01, 0x06, 0xC0, 0x80, 0x0F, 0x07, 0x00, 0x00, 0xFE, 0x03, 0x00, 0x00, 0xFC, 0x00, 0xC0, 0xC0, 0x1F, 0x00, 0xC0, 0xF8, 0x03, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x06, // 255
-};
+};
+
+#endif // OLED_PL

src/graphics/fonts/OLEDDisplayFontsRU.h

@@ -8,4 +8,6 @@
 #endif
 
 extern const uint8_t ArialMT_Plain_10_RU[] PROGMEM;
+extern const uint8_t ArialMT_Plain_16_RU[] PROGMEM;
+extern const uint8_t ArialMT_Plain_24_RU[] PROGMEM;
 #endif

src/graphics/fonts/OLEDDisplayFontsUA.cpp

@@ -1,3 +1,5 @@
+#ifdef OLED_UA
+
 #include "OLEDDisplayFontsUA.h"
 
 // Font generated or edited with the glyphEditor
@@ -1920,4 +1922,6 @@ const uint8_t ArialMT_Plain_24_UA[] PROGMEM = {
     0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xC1, 0x00, 0x00, 0xF0, 0xE3, 0x00, 0x00, 0x38, 0x7B, 0x00, 0x00, 0x18, 0x1A, 0x00, 0x00,
     0x18, 0x0E, 0x00, 0x00, 0x18, 0x06, 0x00, 0x00, 0x18, 0x06, 0x00, 0x00, 0x18, 0x06, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8,
     0xFF, // 1103
-};
+};
+
+#endif // OLED_UA

src/graphics/niche/Drivers/EInk/E0213A367.cpp

@@ -0,0 +1,84 @@
+#include "./E0213A367.h"
+
+#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
+
+using namespace NicheGraphics::Drivers;
+
+// Map the display controller IC's output to the connected panel
+void E0213A367::configScanning()
+{
+    // "Driver output control"
+    // Scan gates from 0 to 249 (vertical resolution 250px)
+    sendCommand(0x01);
+    sendData(0xF9);
+    sendData(0x00);
+}
+
+// Specify which information is used to control the sequence of voltages applied to move the pixels
+void E0213A367::configWaveform()
+{
+    // This command (0x37) is poorly documented
+    // As of July 2025, the datasheet for this display's controller IC is unavailable
+    // The values are supplied by Heltec, who presumably have privileged access to information from the display manufacturer
+    // Datasheet for the similar SSD1680 IC hints at the function of this command:
+
+    // "Spare VCOM OTP selection":
+    // Unclear why 0x40 is set. Sane values for related SSD1680 seem to be 0x80 or 0x00.
+    // Maybe value is redundant? No noticeable impact when set to 0x00.
+    // We'll leave it set to 0x40, following Heltec's lead, just in case.
+
+    // "Display Mode"
+    // Seems to specify whether a waveform stored in OTP should use display mode 1 or 2 (full refresh or differential refresh)
+
+    // Unusual that waveforms are programmed to OTP, but this meta information is not ..?
+
+    sendCommand(0x37); // "Write Register for Display Option" ?
+    sendData(0x40);    // "Spare VCOM OTP selection" ?
+    sendData(0x80);    // "Display Mode for WS[7:0]" ?
+    sendData(0x03);    // "Display Mode for WS[15:8]" ?
+    sendData(0x0E);    // "Display Mode [23:16]" ?
+
+    switch (updateType) {
+    case FAST:
+        sendCommand(0x3C); // Border waveform:
+        sendData(0x81);    // As specified by Heltec. Actually VCOM (0x80)?. Bit 0 seems redundant here.
+        break;
+    case FULL:
+    default:
+        sendCommand(0x3C); // Border waveform:
+        sendData(0x01);    // Follow LUT 1 (blink same as white pixels)
+        break;
+    }
+}
+
+// Tell controller IC which operations to run
+void E0213A367::configUpdateSequence()
+{
+    switch (updateType) {
+    case FAST:
+        sendCommand(0x22); // Set "update sequence"
+        sendData(0xFF);    // Will load LUT from OTP memory, Display mode 2 "differential refresh"
+        break;
+    case FULL:
+    default:
+        sendCommand(0x22); // Set "update sequence"
+        sendData(0xF7);    // Will load LUT from OTP memory, Display mode 1 "full refresh"
+        break;
+    }
+}
+
+// Once the refresh operation has been started,
+// begin periodically polling the display to check for completion, using the normal Meshtastic threading code
+// Only used when refresh is "async"
+void E0213A367::detachFromUpdate()
+{
+    switch (updateType) {
+    case FAST:
+        return beginPolling(50, 500); // At least 500ms for fast refresh
+    case FULL:
+    default:
+        return beginPolling(100, 1500); // At least 1.5 seconds for full refresh
+    }
+}
+
+#endif // MESHTASTIC_INCLUDE_NICHE_GRAPHICS

src/graphics/niche/Drivers/EInk/E0213A367.h

@@ -0,0 +1,41 @@
+/*
+
+E-Ink display driver
+    - SSD1682
+    - Manufacturer: SEEKINK
+    - Size: 2.13 inch
+    - Resolution: 122px x 255px
+    - Flex connector marking: HINK-E0213A162-A1 (hidden, printed on reverse)
+
+*/
+
+#pragma once
+
+#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
+
+#include "configuration.h"
+
+#include "./SSD1682.h"
+
+namespace NicheGraphics::Drivers
+{
+class E0213A367 : public SSD1682
+{
+    // Display properties
+  private:
+    static constexpr uint32_t width = 122;
+    static constexpr uint32_t height = 250;
+    static constexpr UpdateTypes supported = (UpdateTypes)(FULL | FAST);
+
+  public:
+    E0213A367() : SSD1682(width, height, supported, 0) {}
+
+  protected:
+    void configScanning() override;
+    void configWaveform() override;
+    void configUpdateSequence() override;
+    void detachFromUpdate() override;
+};
+
+} // namespace NicheGraphics::Drivers
+#endif // MESHTASTIC_INCLUDE_NICHE_GRAPHICS

src/graphics/niche/Drivers/EInk/SSD1682.cpp

@@ -0,0 +1,41 @@
+#include "./SSD1682.h"
+
+#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
+
+using namespace NicheGraphics::Drivers;
+
+SSD1682::SSD1682(uint16_t width, uint16_t height, EInk::UpdateTypes supported, uint8_t bufferOffsetX)
+    : SSD16XX(width, height, supported, bufferOffsetX)
+{
+}
+
+// SSD1682 only accepts single-byte x and y values
+// This causes an incompatibility with the default SSD16XX::configFullscreen
+void SSD1682::configFullscreen()
+{
+    // Define the boundaries of the "fullscreen" region, for the controller IC
+    static const uint8_t sx = bufferOffsetX; // Notice the offset
+    static const uint8_t sy = 0;
+    static const uint8_t ex = bufferRowSize + bufferOffsetX - 1; // End is "max index", not "count". Minus 1 handles this
+    static const uint8_t ey = height;
+
+    // Data entry mode - Left to Right, Top to Bottom
+    sendCommand(0x11);
+    sendData(0x03);
+
+    // Select controller IC memory region to display a fullscreen image
+    sendCommand(0x44); // Memory X start - end
+    sendData(sx);
+    sendData(ex);
+    sendCommand(0x45); // Memory Y start - end
+    sendData(sy);
+    sendData(ey);
+
+    // Place the cursor at the start of this memory region, ready to send image data x=0 y=0
+    sendCommand(0x4E); // Memory cursor X
+    sendData(sx);
+    sendCommand(0x4F); // Memory cursor y
+    sendData(sy);
+}
+
+#endif

src/graphics/niche/Drivers/EInk/SSD1682.h

@@ -0,0 +1,31 @@
+/*
+
+E-Ink base class for displays based on SSD1682
+
+SSD1682 has a few quirks. We're implementing them here in a new base class,
+to avoid re-implementing them every time we need to add a new SSD1682-based display.
+
+*/
+
+#pragma once
+
+#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
+
+#include "configuration.h"
+
+#include "./SSD16XX.h"
+
+namespace NicheGraphics::Drivers
+{
+
+class SSD1682 : public SSD16XX
+{
+  public:
+    SSD1682(uint16_t width, uint16_t height, EInk::UpdateTypes supported, uint8_t bufferOffsetX = 0);
+    virtual void configFullscreen(); // Select memory region on controller IC
+    virtual void deepSleep() {}      // Not usable (image memory not retained)
+};
+
+} // namespace NicheGraphics::Drivers
+
+#endif // MESHTASTIC_INCLUDE_NICHE_GRAPHICS

src/graphics/niche/InkHUD/Applets/System/Menu/MenuApplet.cpp

@@ -223,7 +223,7 @@ void InkHUD::MenuApplet::execute(MenuItem item)
 
     case SHUTDOWN:
         LOG_INFO("Shutting down from menu");
-        power->shutdown();
+        shutdownAtMsec = millis();
         // Menu is then sent to background via onShutdown
         break;
 

src/graphics/niche/InkHUD/Events.cpp

@@ -39,8 +39,8 @@ void InkHUD::Events::begin()
 void InkHUD::Events::onButtonShort()
 {
     // Audio feedback (via buzzer)
-    // Short low tone
+    // Short tone
-    playBoop();
+    playChirp();
     // Cancel any beeping, buzzing, blinking
     // Some button handling suppressed if we are dismissing an external notification (see below)
     bool dismissedExt = dismissExternalNotification();
@@ -64,8 +64,8 @@ void InkHUD::Events::onButtonShort()
 void InkHUD::Events::onButtonLong()
 {
     // Audio feedback (via buzzer)
-    // Low tone, longer than playBoop
+    // Slightly longer than playChirp
-    playBeep();
+    playBoop();
 
     // Check which system applet wants to handle the button press (if any)
     SystemApplet *consumer = nullptr;

src/graphics/niche/InkHUD/PlatformioConfig.ini

@@ -1,7 +1,6 @@
 [inkhud]
 build_src_filter = 
   +<graphics/niche/>; Include the nicheGraphics directory
-  +<../variants/$PIOENV>; Include nicheGraphics.h from our variant folder
 build_flags = 
   -D MESHTASTIC_INCLUDE_NICHE_GRAPHICS ; Use NicheGraphics
   -D MESHTASTIC_INCLUDE_INKHUD ; Use InkHUD (a NicheGraphics UI)

src/input/ButtonThread.cpp

@@ -53,23 +53,21 @@ bool ButtonThread::initButton(const ButtonConfig &config)
         },
         this);
 
-    if (config.longPress != INPUT_BROKER_NONE) {
+    _longPress = config.longPress;
-        _longPress = config.longPress;
+    userButton.attachLongPressStart(
-        userButton.attachLongPressStart(
+        [](void *callerThread) -> void {
-            [](void *callerThread) -> void {
+            ButtonThread *thread = (ButtonThread *)callerThread;
-                ButtonThread *thread = (ButtonThread *)callerThread;
+            // if (millis() > 30000) // hold off 30s after boot
-                // if (millis() > 30000) // hold off 30s after boot
+            thread->btnEvent = BUTTON_EVENT_LONG_PRESSED;
-                thread->btnEvent = BUTTON_EVENT_LONG_PRESSED;
+        },
-            },
+        this);
-            this);
+    userButton.attachLongPressStop(
-        userButton.attachLongPressStop(
+        [](void *callerThread) -> void {
-            [](void *callerThread) -> void {
+            ButtonThread *thread = (ButtonThread *)callerThread;
-                ButtonThread *thread = (ButtonThread *)callerThread;
+            // if (millis() > 30000) // hold off 30s after boot
-                // if (millis() > 30000) // hold off 30s after boot
+            thread->btnEvent = BUTTON_EVENT_LONG_RELEASED;
-                thread->btnEvent = BUTTON_EVENT_LONG_RELEASED;
+        },
-            },
+        this);
-            this);
-    }
 
     if (config.doublePress != INPUT_BROKER_NONE) {
         _doublePress = config.doublePress;
@@ -94,8 +92,11 @@ bool ButtonThread::initButton(const ButtonConfig &config)
     if (config.shortLong != INPUT_BROKER_NONE) {
         _shortLong = config.shortLong;
     }
-
+#ifdef USE_EINK
+    userButton.setDebounceMs(0);
+#else
     userButton.setDebounceMs(1);
+#endif
     userButton.setPressMs(_longPressTime);
 
     if (screen) {
@@ -139,8 +140,7 @@ int32_t ButtonThread::runOnce()
     }
 
     // Progressive lead-up sound system
-    if (buttonCurrentlyPressed && (millis() - buttonPressStartTime) >= BUTTON_LEADUP_MS &&
+    if (buttonCurrentlyPressed && (millis() - buttonPressStartTime) >= BUTTON_LEADUP_MS) {
-        (millis() - buttonPressStartTime) < _longLongPressTime) {
 
         // Start the progressive sequence if not already active
         if (!leadUpSequenceActive) {
@@ -152,13 +152,14 @@ int32_t ButtonThread::runOnce()
         else if ((millis() - lastLeadUpNoteTime) >= 400) { // 400ms interval between notes
             if (playNextLeadUpNote()) {
                 lastLeadUpNoteTime = millis();
+            } else {
+                leadUpPlayed = true;
             }
         }
     }
 
     // Reset when button is released
     if (!buttonCurrentlyPressed && buttonWasPressed) {
-        leadUpPlayed = false;
         leadUpSequenceActive = false;
         resetLeadUpSequence();
     }
@@ -202,11 +203,11 @@ int32_t ButtonThread::runOnce()
 
                 break;
             }
-
+            if (_longPress != INPUT_BROKER_NONE) {
-            // Forward long press to InputBroker (but NOT as DOWN/SELECT, just forward a "button long press" event)
+                // Forward long press to InputBroker (but NOT as DOWN/SELECT, just forward a "button long press" event)
-            evt.inputEvent = _longPress;
+                evt.inputEvent = _longPress;
-            this->notifyObservers(&evt);
+                this->notifyObservers(&evt);
-
+            }
             // Reset combination tracking
             waitingForLongPress = false;
 
@@ -253,14 +254,15 @@ int32_t ButtonThread::runOnce()
         // may wake the board immediatedly.
         case BUTTON_EVENT_LONG_RELEASED: {
 
-            LOG_INFO("LONG PRESS RELEASE");
+            LOG_INFO("LONG PRESS RELEASE AFTER %u MILLIS", millis() - buttonPressStartTime);
             if (millis() > 30000 && _longLongPress != INPUT_BROKER_NONE &&
-                (millis() - buttonPressStartTime) >= _longLongPressTime) {
+                (millis() - buttonPressStartTime) >= _longLongPressTime && leadUpPlayed) {
                 evt.inputEvent = _longLongPress;
                 this->notifyObservers(&evt);
             }
             // Reset combination tracking
             waitingForLongPress = false;
+            leadUpPlayed = false;
 
             break;
         }

src/input/ButtonThread.h

@@ -18,13 +18,13 @@ struct ButtonConfig {
     uint16_t longPressTime = 500;
     input_broker_event doublePress = INPUT_BROKER_NONE;
     input_broker_event longLongPress = INPUT_BROKER_NONE;
-    uint16_t longLongPressTime = 5000;
+    uint16_t longLongPressTime = 3900;
     input_broker_event triplePress = INPUT_BROKER_NONE;
     input_broker_event shortLong = INPUT_BROKER_NONE;
     bool touchQuirk = false;
 
     // Constructor to set required parameter
-    ButtonConfig(uint8_t pin = 0) : pinNumber(pin) {}
+    explicit ButtonConfig(uint8_t pin = 0) : pinNumber(pin) {}
 };
 
 #ifndef BUTTON_CLICK_MS
@@ -62,7 +62,7 @@ class ButtonThread : public Observable<const InputEvent *>, public concurrency::
         BUTTON_EVENT_COMBO_SHORT_LONG,
     };
 
-    ButtonThread(const char *name);
+    explicit ButtonThread(const char *name);
     int32_t runOnce() override;
     OneButton userButton;
     void attachButtonInterrupts();
@@ -92,7 +92,7 @@ class ButtonThread : public Observable<const InputEvent *>, public concurrency::
 
     voidFuncPtr _intRoutine = nullptr;
     uint16_t _longPressTime = 500;
-    uint16_t _longLongPressTime = 5000;
+    uint16_t _longLongPressTime = 3900;
     int _pinNum = 0;
     bool _activeLow = true;
     bool _touchQuirk = false;