chore(deps): update sensorlib to v0.3.4

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>

platformio.ini

@@ -119,7 +119,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/3480b731d28b10d73414cf0dd7975bff745de8cf.zip
+	https://github.com/meshtastic/device-ui/archive/613c0953313bbd236f4ddc5ede447e9edf8e890a.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]

src/Power.cpp

@@ -723,6 +723,16 @@ bool Power::setup()
             runASAP = true;
         },
         CHANGE);
+#endif
+#ifdef EXT_CHRG_DETECT
+    attachInterrupt(
+        EXT_CHRG_DETECT,
+        []() {
+            power->setIntervalFromNow(0);
+            runASAP = true;
+            BaseType_t higherWake = 0;
+        },
+        CHANGE);
 #endif
     enabled = found;
     low_voltage_counter = 0;

src/modules/NodeInfoModule.cpp

@@ -2,6 +2,7 @@
 #include "Default.h"
 #include "MeshService.h"
 #include "NodeDB.h"
+#include "NodeStatus.h"
 #include "RTC.h"
 #include "Router.h"
 #include "configuration.h"
@@ -129,14 +130,17 @@ meshtastic_MeshPacket *NodeInfoModule::allocReply()
         LOG_DEBUG("Skip send NodeInfo > 40%% ch. util");
         return NULL;
     }
-    // If we sent our NodeInfo less than 5 min. ago, don't send it again as it may be still underway.
+
-    if (!shorterTimeout && lastSentToMesh && Throttle::isWithinTimespanMs(lastSentToMesh, 5 * 60 * 1000)) {
+    // Use graduated scaling based on active mesh size (10 minute base, scales with congestion coefficient)
-        LOG_DEBUG("Skip send NodeInfo since we sent it <5min ago");
+    uint32_t timeoutMs = Default::getConfiguredOrDefaultMsScaled(0, 10 * 60, nodeStatus->getNumOnline());
+    if (!shorterTimeout && lastSentToMesh && Throttle::isWithinTimespanMs(lastSentToMesh, timeoutMs)) {
+        LOG_DEBUG("Skip send NodeInfo since we sent it <%us ago", timeoutMs / 1000);
         ignoreRequest = true; // Mark it as ignored for MeshModule
         return NULL;
     } else if (shorterTimeout && lastSentToMesh && Throttle::isWithinTimespanMs(lastSentToMesh, 60 * 1000)) {
+        // For interactive/urgent requests (e.g., user-triggered or implicit requests), use a shorter 60s timeout
         LOG_DEBUG("Skip send NodeInfo since we sent it <60s ago");
-        ignoreRequest = true; // Mark it as ignored for MeshModule
+        ignoreRequest = true;
         return NULL;
     } else {
         ignoreRequest = false; // Don't ignore requests anymore

variants/esp32/chatter2/platformio.ini

@@ -6,6 +6,8 @@ build_flags =
   ${esp32_base.build_flags}
   -D CHATTER_2
   -I variants/esp32/chatter2
+  -DMESHTASTIC_EXCLUDE_WEBSERVER=1
+  -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
   
 lib_deps =
   ${esp32_base.lib_deps}

variants/esp32/m5stack_core/platformio.ini

@@ -16,6 +16,8 @@ build_flags =
   ${esp32_base.build_flags}
   -I variants/esp32/m5stack_core
   -DM5STACK
+  -DMESHTASTIC_EXCLUDE_WEBSERVER=1
+  -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
   -DUSER_SETUP_LOADED
   -DTFT_SDA_READ
   -DTFT_DRIVER=0x9341

variants/esp32/m5stack_coreink/platformio.ini

@@ -21,7 +21,7 @@ lib_deps =
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
   zinggjm/GxEPD2@1.6.5
   # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4
 lib_ignore =
   m5stack-coreink
 monitor_filters = esp32_exception_decoder

variants/esp32s3/t-watch-s3/platformio.ini

@@ -24,7 +24,7 @@ lib_deps = ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
   lovyan03/LovyanGFX@1.2.7
   # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4
   # renovate: datasource=custom.pio depName=Adafruit DRV2605 packageName=adafruit/library/Adafruit DRV2605 Library
   adafruit/Adafruit DRV2605 Library@1.2.4
   # renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio

variants/esp32s3/tbeam-s3-core/platformio.ini

@@ -19,7 +19,7 @@ board_check = true
 lib_deps =
   ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4
 
 build_flags = 
   ${esp32s3_base.build_flags} 

variants/esp32s3/tlora-pager/platformio.ini

@@ -39,7 +39,7 @@ lib_deps = ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
   lewisxhe/PCF8563_Library@1.0.1
   # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4
   # renovate: datasource=github-tags depName=pschatzmann_arduino-audio-driver packageName=pschatzmann/arduino-audio-driver
   https://github.com/pschatzmann/arduino-audio-driver/archive/v0.2.0.zip
   # TODO renovate

variants/nrf52840/ELECROW-ThinkNode-M3/platformio.ini

@@ -25,4 +25,4 @@ lib_deps =
   # renovate: datasource=custom.pio depName=nRF52_PWM packageName=khoih-prog/library/nRF52_PWM
   khoih-prog/nRF52_PWM@1.0.1
   ; # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  ; lewisxhe/SensorLib@0.3.3
+  ; lewisxhe/SensorLib@0.3.4

variants/nrf52840/ELECROW-ThinkNode-M6/platformio.ini

@@ -22,4 +22,4 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ELECROW
 lib_deps =
   ${nrf52840_base.lib_deps}
   ; # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  ; lewisxhe/SensorLib@0.3.3
+  ; lewisxhe/SensorLib@0.3.4

variants/nrf52840/nano-g2-ultra/platformio.ini

@@ -20,5 +20,5 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/nano-g2
 lib_deps = 
   ${nrf52840_base.lib_deps}
   # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4
 ;upload_protocol = fs

variants/nrf52840/t-echo/platformio.ini

@@ -32,7 +32,7 @@ lib_deps =
   # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
   https://github.com/meshtastic/GxEPD2/archive/a05c11c02862624266b61599b0d6ba93e33c6f24.zip
   # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4
 ;upload_protocol = fs
 
 [env:t-echo-inkhud]
@@ -53,4 +53,4 @@ lib_deps =
   ${inkhud.lib_deps} ; InkHUD libs first, so we get GFXRoot instead of AdafruitGFX
   ${nrf52840_base.lib_deps}
   # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4