Merge branch 'develop' into ch341-read-eeprom

Adding support for InkHUD joystick navigation for the Seeed Wio Tracker L1 E-ink (#8678 )
* TwoButtonExtened mirrors TwoButton but added joystick functionality * basic ui navigation with a joystick settings->joystick.enabled setting added and SETTINGS_VERSION incremented by one in InkHUD/Persistence.h in seeed_wio_tracker_L1_eink/nicheGraphics.h enable joystick and disable "Next Tile" menu item in implement prevTile and prevApplet functions in InkHUD/WindowManager.h,cpp and InkHUD/InkHUD.h,cpp onStickCenterShort, onStickCenterLong, onStickUp, onStickDown, onStickLeft, and onStickRight functions added to: - InkHUD/InkHUD.h,cpp - InkHUD/Events.h,cpp - InkHUD/Applet.h change navigation actions in InkHUD/Events.cpp events based on whether the joystick is enabled or not in seeed_wio_tracker_L1_eink/nicheGraphics.h connect joystick events to the new joystick handler functions * handle joystick input in NotificationApplet and TipsApplet Both the joystick center short press and the user button short press can be used to advance through the Tips applet. dismiss notifications with any joystick input * MenuApplet controls allows menu navigation including a back button * add AlignStickApplet for aligning the joystick with the screen add joystick.aligned and joystick.alignment to InkHUD/Persistence.h for storing alignment status and relative angle create AlignStick applet that prompts the user for a joystick input and rotates the controls to align with the screen AlignStick applet is run after the tips applet if the joystick is enabled and not aligned add menu item for opening the AlignStick applet * update tips applet with joystick controls * format InkHUD additions * fix stroke consistency when resizing joystick graphic * tweak button tips for order consistency * increase joystick debounce * fix comments * remove unnecessary '+' * remap joystick controls to match standard inkHUD behavior Input with a joystick now behaves as follows User Button (joystick center): - short press in applet -> opens menu - long press in applet -> opens menu - short press in menu -> selects - long press in menu -> selects Exit Button: - short press in applet -> switches tile - long press in applet -> nothing for now - short press in menu -> closes menu - long press in menu -> nothing for now --------- Co-authored-by: scobert <scobert57@gmail.com> Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com>
2025-12-21 02:02:23 +00:00 · 2025-12-20 14:21:46 -06:00 · 2025-12-20 15:15:42 -05:00 · 2025-12-20 13:00:50 -06:00 · 2025-12-20 11:11:21 -06:00 · 2025-12-20 09:52:08 -06:00
210 changed files with 3322 additions and 647 deletions
--- a/.github/actions/build-variant/action.yml
+++ b/.github/actions/build-variant/action.yml
@@ -76,7 +76,7 @@ runs:
        done

    - name: PlatformIO ${{ inputs.arch }} download cache
-      uses: actions/cache@v4
+      uses: actions/cache@v5
      with:
        path: ~/.platformio/.cache
        key: pio-cache-${{ inputs.arch }}-${{ hashFiles('.github/actions/**', '**.ini') }}
@@ -100,7 +100,7 @@ runs:
      id: version

    - name: Store binaries as an artifact
-      uses: actions/upload-artifact@v5
+      uses: actions/upload-artifact@v6
      with:
        name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.long }}
        overwrite: true
--- a/.github/workflows/build_debian_src.yml
+++ b/.github/workflows/build_debian_src.yml
@@ -64,7 +64,7 @@ jobs:
          PKG_VERSION: ${{ steps.version.outputs.deb }}

      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v6
        with:
          name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
          overwrite: true
--- a/.github/workflows/build_firmware.yml
+++ b/.github/workflows/build_firmware.yml
@@ -56,19 +56,21 @@ jobs:
          ota_firmware_source: ${{ steps.ota_dir.outputs.src || '' }}
          ota_firmware_target: ${{ steps.ota_dir.outputs.tgt || '' }}

-      - name: Echo manifest from release/firmware-*.mt.json to job summary
-        if: ${{ always() }}
+      - name: Job summary
        env:
          PIO_ENV: ${{ inputs.pio_env }}
        run: |
-          echo "## Manifest: \`$PIO_ENV\`" >> $GITHUB_STEP_SUMMARY
+          echo "## $PIO_ENV" >> $GITHUB_STEP_SUMMARY
+          echo "<details><summary><strong>Manifest</strong></summary>" >> $GITHUB_STEP_SUMMARY
+          echo '' >> $GITHUB_STEP_SUMMARY
          echo '```json' >> $GITHUB_STEP_SUMMARY
          cat release/firmware-*.mt.json >> $GITHUB_STEP_SUMMARY
          echo '' >> $GITHUB_STEP_SUMMARY
          echo '```' >> $GITHUB_STEP_SUMMARY
+          echo "</details>" >> $GITHUB_STEP_SUMMARY

      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v6
        id: upload
        with:
          name: firmware-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}
--- a/.github/workflows/build_one_target.yml
+++ b/.github/workflows/build_one_target.yml
@@ -98,7 +98,7 @@ jobs:
          ref: ${{github.event.pull_request.head.ref}}
          repository: ${{github.event.pull_request.head.repo.full_name}}

-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v7
        with:
          path: ./
          pattern: firmware-*-*
@@ -111,7 +111,7 @@ jobs:
        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat

      - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v6
        with:
          name: firmware-${{inputs.target}}-${{ needs.version.outputs.long }}
          overwrite: true
@@ -127,7 +127,7 @@ jobs:
            ./Meshtastic_nRF52_factory_erase*.uf2
          retention-days: 30

-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v7
        with:
          pattern: firmware-*-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -146,7 +146,7 @@ jobs:
        run: zip -j -9 -r ./firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip ./output

      - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v6
        with:
          name: debug-elfs-${{inputs.target}}-${{ needs.version.outputs.long }}.zip
          overwrite: true
--- a/.github/workflows/main_matrix.yml
+++ b/.github/workflows/main_matrix.yml
@@ -173,7 +173,7 @@ jobs:
          ref: ${{github.event.pull_request.head.ref}}
          repository: ${{github.event.pull_request.head.repo.full_name}}

-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v7
        with:
          path: ./
          pattern: firmware-${{matrix.arch}}-*
@@ -183,7 +183,7 @@ jobs:
        run: ls -R

      - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v6
        with:
          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
          overwrite: true
@@ -200,7 +200,7 @@ jobs:
            ./Meshtastic_nRF52_factory_erase*.uf2
          retention-days: 30

-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v7
        with:
          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -219,7 +219,7 @@ jobs:
        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output

      - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v6
        with:
          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
          overwrite: true
@@ -260,14 +260,14 @@ jobs:
            Autogenerated by github action, developer should edit as required before publishing...

      - name: Download source deb
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v7
        with:
          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
          merge-multiple: true
          path: ./output/debian-src

      - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v7
        with:
          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -291,7 +291,7 @@ jobs:
          }' > firmware-${{ needs.version.outputs.long }}.json

      - name: Save Release manifest artifact
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v6
        with:
          name: manifest-${{ needs.version.outputs.long }}
          overwrite: true
@@ -332,7 +332,7 @@ jobs:
        with:
          python-version: 3.x

-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v7
        with:
          pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -349,7 +349,7 @@ jobs:
      - name: Zip firmware
        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output

-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v7
        with:
          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -388,14 +388,14 @@ jobs:
          python-version: 3.x

      - name: Get firmware artifacts
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v7
        with:
          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
          merge-multiple: true
          path: ./publish

      - name: Get manifest artifact
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v7
        with:
          pattern: manifest-${{ needs.version.outputs.long }}
          path: ./publish
--- a/.github/workflows/merge_queue.yml
+++ b/.github/workflows/merge_queue.yml
@@ -147,7 +147,7 @@ jobs:
          ref: ${{github.event.pull_request.head.ref}}
          repository: ${{github.event.pull_request.head.repo.full_name}}

-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v7
        with:
          path: ./
          pattern: firmware-${{matrix.arch}}-*
@@ -160,7 +160,7 @@ jobs:
        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat

      - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v6
        with:
          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
          overwrite: true
@@ -176,7 +176,7 @@ jobs:
            ./Meshtastic_nRF52_factory_erase*.uf2
          retention-days: 30

-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v7
        with:
          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -195,7 +195,7 @@ jobs:
        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output

      - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v6
        with:
          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
          overwrite: true
@@ -235,14 +235,14 @@ jobs:
            Autogenerated by github action, developer should edit as required before publishing...

      - name: Download source deb
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v7
        with:
          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
          merge-multiple: true
          path: ./output/debian-src

      - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v7
        with:
          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -292,7 +292,7 @@ jobs:
        with:
          python-version: 3.x

-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v7
        with:
          pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -309,7 +309,7 @@ jobs:
      - name: Zip firmware
        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output

-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v7
        with:
          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -347,7 +347,7 @@ jobs:
        with:
          python-version: 3.x

-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v7
        with:
          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
          merge-multiple: true
--- a/.github/workflows/package_obs.yml
+++ b/.github/workflows/package_obs.yml
@@ -58,7 +58,7 @@ jobs:
        id: version

      - name: Download artifacts
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v7
        with:
          name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
          merge-multiple: true
--- a/.github/workflows/package_pio_deps.yml
+++ b/.github/workflows/package_pio_deps.yml
@@ -56,7 +56,7 @@ jobs:
          PLATFORMIO_CORE_DIR: pio/core

      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v6
        with:
          name: platformio-deps-${{ inputs.pio_env }}-${{ steps.version.outputs.long }}
          overwrite: true
--- a/.github/workflows/package_ppa.yml
+++ b/.github/workflows/package_ppa.yml
@@ -60,7 +60,7 @@ jobs:
        id: version

      - name: Download artifacts
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v7
        with:
          name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
          merge-multiple: true
--- a/.github/workflows/pr_tests.yml
+++ b/.github/workflows/pr_tests.yml
@@ -50,7 +50,7 @@ jobs:

      - name: Download test artifacts
        if: needs.native-tests.result != 'skipped'
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v7
        with:
          name: platformio-test-report-${{ steps.version.outputs.long }}
          merge-multiple: true
--- a/.github/workflows/sec_sast_semgrep_cron.yml
+++ b/.github/workflows/sec_sast_semgrep_cron.yml
@@ -33,7 +33,7 @@ jobs:

      # step 3
      - name: save report as pipeline artifact
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v6
        with:
          name: report.sarif
          overwrite: true
--- a/.github/workflows/test_native.yml
+++ b/.github/workflows/test_native.yml
@@ -59,7 +59,7 @@ jobs:
        id: version

      - name: Save coverage information
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v6
        if: always() # run this step even if previous step failed
        with:
          name: lcov-coverage-info-native-simulator-test-${{ steps.version.outputs.long }}
@@ -94,7 +94,7 @@ jobs:

      - name: Save test results
        if: always() # run this step even if previous step failed
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v6
        with:
          name: platformio-test-report-${{ steps.version.outputs.long }}
          overwrite: true
@@ -108,7 +108,7 @@ jobs:
          sed -i -e "s#${PWD}#.#" coverage_tests.info # Make paths relative.

      - name: Save coverage information
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v6
        if: always() # run this step even if previous step failed
        with:
          name: lcov-coverage-info-native-platformio-tests-${{ steps.version.outputs.long }}
@@ -137,7 +137,7 @@ jobs:
        id: version

      - name: Download test artifacts
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v7
        with:
          name: platformio-test-report-${{ steps.version.outputs.long }}
          merge-multiple: true
@@ -150,7 +150,7 @@ jobs:
          reporter: java-junit

      - name: Download coverage artifacts
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v7
        with:
          pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}
          path: code-coverage-report
@@ -163,7 +163,7 @@ jobs:
          genhtml --quiet --legend --prefix "${PWD}" code-coverage-report/coverage_src.info --output-directory code-coverage-report

      - name: Save Code Coverage Report
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v6
        with:
          name: code-coverage-report-${{ steps.version.outputs.long }}
          path: code-coverage-report
--- a/.github/workflows/update_protobufs.yml
+++ b/.github/workflows/update_protobufs.yml
@@ -16,7 +16,7 @@ jobs:
          submodules: true

      - name: Update submodule
-        if: ${{ github.ref == 'refs/heads/master' }}
+        if: ${{ github.ref == 'refs/heads/master' || github.ref == 'refs/heads/develop' }}
        run: |
          git submodule update --remote protobufs

--- a/.trunk/trunk.yaml
+++ b/.trunk/trunk.yaml
@@ -9,16 +9,16 @@ plugins:
 lint:
  enabled:
    - checkov@3.2.495
-    - renovate@42.42.2
+    - renovate@42.64.1
    - prettier@3.7.4
-    - trufflehog@3.92.1
+    - trufflehog@3.92.3
    - yamllint@1.37.1
    - bandit@1.9.2
-    - trivy@0.68.1
+    - trivy@0.68.2
    - taplo@0.10.0
-    - ruff@0.14.8
+    - ruff@0.14.10
    - isort@7.0.0
-    - markdownlint@0.46.0
+    - markdownlint@0.47.0
    - oxipng@10.0.0
    - svgo@4.0.0
    - actionlint@1.7.9
--- a/bin/config-dist.yaml
+++ b/bin/config-dist.yaml
@@ -184,6 +184,8 @@ Input:
 Logging:
  LogLevel: info # debug, info, warn, error
 #  TraceFile: /var/log/meshtasticd.json
+#  JSONFile: /packets.json # File location for JSON output of decoded packets
+#  JSONFilter: position # filter for packets to save to JSON file
 #  AsciiLogs: true     # default if not specified is !isatty() on stdout

 Webserver:
--- a/bin/org.meshtastic.meshtasticd.metainfo.xml
+++ b/bin/org.meshtastic.meshtasticd.metainfo.xml
@@ -87,6 +87,9 @@
  </screenshots>

  <releases>
+    <release version="2.7.18" date="2025-12-20">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.18</url>
+    </release>
    <release version="2.7.17" date="2025-11-28">
      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.17</url>
    </release>
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,3 +1,9 @@
+meshtasticd (2.7.18.0) unstable; urgency=medium
+
+  * Version 2.7.18
+
+ -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Sat, 20 Dec 2025 15:47:25 +0000
+
 meshtasticd (2.7.17.0) unstable; urgency=medium

  * Version 2.7.17
--- a/platformio.ini
+++ b/platformio.ini
@@ -103,17 +103,13 @@ lib_deps =
 	thingsboard/TBPubSubClient@2.12.1
 	# renovate: datasource=custom.pio depName=NTPClient packageName=arduino-libraries/library/NTPClient
 	arduino-libraries/NTPClient@3.2.1
+
+; Extra TCP/IP networking libs for supported devices
+[networking_extra]
+lib_deps =
 	# renovate: datasource=custom.pio depName=Syslog packageName=arcao/library/Syslog
 	arcao/Syslog@2.0.0

-; Minimal networking libs for nrf52 (excludes Syslog to save flash)
-[nrf52_networking_base]
-lib_deps =
-	# renovate: datasource=custom.pio depName=TBPubSubClient packageName=thingsboard/library/TBPubSubClient
-	thingsboard/TBPubSubClient@2.12.1
-	# renovate: datasource=custom.pio depName=NTPClient packageName=arduino-libraries/library/NTPClient
-	arduino-libraries/NTPClient@3.2.1
-
 [radiolib_base]
 lib_deps =
 	# renovate: datasource=custom.pio depName=RadioLib packageName=jgromes/library/RadioLib
@@ -123,7 +119,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/4fb5f24787caa841b58dbf623a52c4c5861d6722.zip
+	https://github.com/meshtastic/device-ui/archive/862ed040c4ab44f0dfbbe492691f144886102588.zip

 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
@@ -162,8 +158,8 @@ lib_deps =
 	emotibit/EmotiBit MLX90632@1.0.8
 	# renovate: datasource=custom.pio depName=Adafruit MLX90614 packageName=adafruit/library/Adafruit MLX90614 Library
 	adafruit/Adafruit MLX90614 Library@2.1.5
-	# renovate: datasource=github-tags depName=INA3221 packageName=sgtwilko/INA3221
-	https://github.com/sgtwilko/INA3221#bb03d7e9bfcc74fc798838a54f4f99738f29fc6a
+	# renovate: datasource=git-refs depName=INA3221 packageName=https://github.com/sgtwilko/INA3221 gitBranch=FixOverflow
+	https://github.com/sgtwilko/INA3221/archive/bb03d7e9bfcc74fc798838a54f4f99738f29fc6a.zip
 	# renovate: datasource=custom.pio depName=QMC5883L Compass packageName=mprograms/library/QMC5883LCompass
 	mprograms/QMC5883LCompass@1.2.3
 	# renovate: datasource=custom.pio depName=DFRobot_RTU packageName=dfrobot/library/DFRobot_RTU
--- a/2
+++ b/2
--- a/src/DisplayFormatters.cpp
+++ b/src/DisplayFormatters.cpp
@@ -31,6 +31,9 @@ const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaC
    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST:
        return useShortName ? "LongF" : "LongFast";
        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO:
+        return useShortName ? "LongT" : "LongTurbo";
+        break;
    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
        return useShortName ? "LongM" : "LongMod";
        break;
--- a/src/graphics/draw/MenuHandler.cpp
+++ b/src/graphics/draw/MenuHandler.cpp
@@ -20,12 +20,41 @@
 #include "modules/KeyVerificationModule.h"

 #include "modules/TraceRouteModule.h"
+#include <algorithm>
+#include <array>
 #include <functional>
+#include <utility>

 extern uint16_t TFT_MESH;

 namespace graphics
 {
+
+namespace
+{
+
+// Caller must ensure the provided options array outlives the banner callback.
+template <typename T, size_t N, typename Callback>
+BannerOverlayOptions createStaticBannerOptions(const char *message, const MenuOption<T> (&options)[N],
+                                               std::array<const char *, N> &labels, Callback &&onSelection)
+{
+    for (size_t i = 0; i < N; ++i) {
+        labels[i] = options[i].label;
+    }
+
+    const MenuOption<T> *optionsPtr = options;
+    auto callback = std::function<void(const MenuOption<T> &, int)>(std::forward<Callback>(onSelection));
+
+    BannerOverlayOptions bannerOptions;
+    bannerOptions.message = message;
+    bannerOptions.optionsArrayPtr = labels.data();
+    bannerOptions.optionsCount = static_cast<uint8_t>(N);
+    bannerOptions.bannerCallback = [optionsPtr, callback](int selected) -> void { callback(optionsPtr[selected], selected); };
+    return bannerOptions;
+}
+
+} // namespace
+
 menuHandler::screenMenus menuHandler::menuQueue = menu_none;
 bool test_enabled = false;
 uint8_t test_count = 0;
@@ -197,48 +226,38 @@ void menuHandler::DeviceRolePicker()

 void menuHandler::RadioPresetPicker()
 {
-    static const char *optionsArray[] = {"Back",       "LongSlow",  "LongModerate", "LongFast",  "MediumSlow",
-                                         "MediumFast", "ShortSlow", "ShortFast",    "ShortTurbo"};
-    enum optionsNumbers {
-        Back = 0,
-        radiopreset_LongSlow = 1,
-        radiopreset_LongModerate = 2,
-        radiopreset_LongFast = 3,
-        radiopreset_MediumSlow = 4,
-        radiopreset_MediumFast = 5,
-        radiopreset_ShortSlow = 6,
-        radiopreset_ShortFast = 7,
-        radiopreset_ShortTurbo = 8
+    static const RadioPresetOption presetOptions[] = {
+        {"Back", OptionsAction::Back},
+        {"LongTurbo", OptionsAction::Select, meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO},
+        {"LongModerate", OptionsAction::Select, meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE},
+        {"LongFast", OptionsAction::Select, meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST},
+        {"MediumSlow", OptionsAction::Select, meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW},
+        {"MediumFast", OptionsAction::Select, meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST},
+        {"ShortSlow", OptionsAction::Select, meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW},
+        {"ShortFast", OptionsAction::Select, meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST},
+        {"ShortTurbo", OptionsAction::Select, meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO},
    };
-    BannerOverlayOptions bannerOptions;
-    bannerOptions.message = "Radio Preset";
-    bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 9;
-    bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == Back) {
+
+    constexpr size_t presetCount = sizeof(presetOptions) / sizeof(presetOptions[0]);
+    static std::array<const char *, presetCount> presetLabels{};
+
+    auto bannerOptions =
+        createStaticBannerOptions("Radio Preset", presetOptions, presetLabels, [](const RadioPresetOption &option, int) -> void {
+            if (option.action == OptionsAction::Back) {
                menuHandler::menuQueue = menuHandler::lora_Menu;
                screen->runNow();
                return;
-        } else if (selected == radiopreset_LongSlow) {
-            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW;
-        } else if (selected == radiopreset_LongModerate) {
-            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE;
-        } else if (selected == radiopreset_LongFast) {
-            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST;
-        } else if (selected == radiopreset_MediumSlow) {
-            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW;
-        } else if (selected == radiopreset_MediumFast) {
-            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST;
-        } else if (selected == radiopreset_ShortSlow) {
-            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW;
-        } else if (selected == radiopreset_ShortFast) {
-            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST;
-        } else if (selected == radiopreset_ShortTurbo) {
-            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO;
            }
+
+            if (!option.hasValue) {
+                return;
+            }
+
+            config.lora.modem_preset = option.value;
            service->reloadConfig(SEGMENT_CONFIG);
            rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
-    };
+        });
+
    screen->showOverlayBanner(bannerOptions);
 }

--- a/src/graphics/draw/MenuHandler.h
+++ b/src/graphics/draw/MenuHandler.h
@@ -99,5 +99,24 @@ class menuHandler
    static void BluetoothToggleMenu();
 };

+/* Generic Menu Options designations  */
+enum class OptionsAction { Back, Select };
+
+template <typename T> struct MenuOption {
+    const char *label;
+    OptionsAction action;
+    bool hasValue;
+    T value;
+
+    MenuOption(const char *labelIn, OptionsAction actionIn, T valueIn)
+        : label(labelIn), action(actionIn), hasValue(true), value(valueIn)
+    {
+    }
+
+    MenuOption(const char *labelIn, OptionsAction actionIn) : label(labelIn), action(actionIn), hasValue(false), value() {}
+};
+
+using RadioPresetOption = MenuOption<meshtastic_Config_LoRaConfig_ModemPreset>;
+
 } // namespace graphics
 #endif
--- a/src/graphics/emotes.cpp
+++ b/src/graphics/emotes.cpp
@@ -13,41 +13,81 @@ const Emote emotes[] = {
    {"\U0001F44E", thumbdown, thumbs_width, thumbs_height}, // 👎 Thumbs Down

    // --- Smileys (Multiple Unicode Aliases) ---
-    {"\U0001F60A", Smiling_Eyes, Smiling_Eyes_width, Smiling_Eyes_height},             // 😊 Smiling Eyes
-    {"\U0001F600", Grinning, Grinning_width, Grinning_height},                         // 😀 Grinning Face
-    {"\U0001F642", Slightly_Smiling, Slightly_Smiling_width, Slightly_Smiling_height}, // 🙂 Slightly Smiling Face
-    {"\U0001F609", Winking_Face, Winking_Face_width, Winking_Face_height},             // 😉 Winking Face
-    {"\U0001F601", Grinning_Smiling_Eyes, Grinning_Smiling_Eyes_width, Grinning_Smiling_Eyes_height}, // 😁 Grinning Smiling Eyes
-    {"\U0001F60D", Heart_eyes, Heart_eyes_width, Heart_eyes_height},                                  // 😍 Heart Eyes
+    {"\U0001F60A", smiling_eyes, smiling_eyes_width, smiling_eyes_height},             // 😊 Smiling Eyes
+    {"\U0001F600", grinning, grinning_width, grinning_height},                         // 😀 Grinning Face
+    {"\U0001F642", slightly_smiling, slightly_smiling_width, slightly_smiling_height}, // 🙂 Slightly Smiling Face
+    {"\U0001F609", winking_face, winking_face_width, winking_face_height},             // 😉 Winking Face
+    {"\U0001F601", grinning_smiling_eyes, grinning_smiling_eyes_width, grinning_smiling_eyes_height}, // 😁 Grinning Smiling Eyes
+    {"\U0001F60D", heart_eyes, heart_eyes_width, heart_eyes_height},                                  // 😍 Heart Eyes
    {"\U0001F970", heart_smile, heart_smile_width, heart_smile_height}, // 🥰 Smiling Face with Hearts

    // --- Question/Alert ---
    {"\u2753", question, question_width, question_height},    // ❓ Question Mark
    {"\u203C\uFE0F", bang, bang_width, bang_height},          // ‼️ Double Exclamation Mark
+    {"\u26A0\uFE0F", caution, caution_width, caution_height}, // ⚠️ Warning Sign

    // --- Laughing Faces ---
    {"\U0001F602", haha, haha_width, haha_height}, // 😂 Face with Tears of Joy
-    {"\U0001F923", ROFL, ROFL_width, ROFL_height}, // 🤣 Rolling on the Floor Laughing
-    {"\U0001F606", Smiling_Closed_Eyes, Smiling_Closed_Eyes_width, Smiling_Closed_Eyes_height}, // 😆 Smiling Closed Eyes
+    {"\U0001F923", rofl, rofl_width, rofl_height}, // 🤣 Rolling on the Floor Laughing
+    {"\U0001F606", smiling_closed_eyes, smiling_closed_eyes_width, smiling_closed_eyes_height}, // 😆 Smiling Closed Eyes
    {"\U0001F605", haha, haha_width, haha_height},                                              // 😅 Smiling with Sweat
-    {"\U0001F604", Grinning_SmilingEyes2, Grinning_SmilingEyes2_width,
-     Grinning_SmilingEyes2_height}, // 😄 Grinning Face with Smiling Eyes
-    {"\U0001F62D", Loudly_Crying_Face, Loudly_Crying_Face_width, Loudly_Crying_Face_height}, // 😭 Loudly Crying Face
+    {"\U0001F604", grinning_smiling_eyes_2, grinning_smiling_eyes_2_width,
+     grinning_smiling_eyes_2_height}, // 😄 Grinning Face with Smiling Eyes
+    {"\U0001F62D", loudly_crying_face, loudly_crying_face_width, loudly_crying_face_height}, // 😭 Loudly Crying Face
+    {"\U0001F92E", vomiting, vomiting_width, vomiting_height},                               // 🤮 Face Vomiting
+    {"\U0001F60E", cool, cool_width, cool_height},                                           // 😎 Smiling Face with Sunglasses
+    {"\U0001F440", eyes, eyes_width, eyes_height},                                           // 👀 Eyes
+    {"\U0001F441\uFE0F", eye, eye_width, eye_height},                                        // 👁️ Eye

    // --- Gestures and People ---
    {"\U0001F44B", wave_icon, wave_icon_width, wave_icon_height},             // 👋 Waving Hand
    {"\u270C\uFE0F", peace_sign, peace_sign_width, peace_sign_height},        // ✌️ Victory Hand
    {"\U0001F596", vulcan_salute, vulcan_salute_width, vulcan_salute_height}, // 🖖 Vulcan Salute
-    {"\U0001F64F", Praying, Praying_width, Praying_height},                   // 🙏 Praying Hands
+    {"\U0001F64F", praying, praying_width, praying_height},                   // 🙏 Praying Hands
+    {"\U0001F4AA", strong, strong_width, strong_height},                      // 💪 Flexed Biceps
+    {"\U0001F937", shrug, shrug_width, shrug_height},                         // 🤷 Person Shrugging
    {"\U0001F920", cowboy, cowboy_width, cowboy_height},                      // 🤠 Cowboy Hat Face
    {"\U0001F3A7", deadmau5, deadmau5_width, deadmau5_height},                // 🎧 Headphones

+    // --- Symbols ---
+    {"\u2714\uFE0F", check_mark, check_mark_width, check_mark_height}, // ✔️ Check Mark
+    {"\u2705", check_mark, check_mark_width, check_mark_height},       // ✅ Check Mark Button
+    {"\u2611\uFE0F", check_mark, check_mark_width, check_mark_height}, // ☑️ Check Box with Check
+    {"\U0001F3E0", house, house_width, house_height},                  // 🏠 House
+
    // --- Weather ---
    {"\u2600", sun, sun_width, sun_height},                                   // ☀ Sun (without variation selector)
    {"\u2600\uFE0F", sun, sun_width, sun_height},                             // ☀️ Sun (with variation selector)
    {"\U0001F327\uFE0F", rain, rain_width, rain_height},                      // 🌧️ Cloud with Rain
    {"\u2601\uFE0F", cloud, cloud_width, cloud_height},                       // ☁️ Cloud
    {"\U0001F32B\uFE0F", fog, fog_width, fog_height},                         // 🌫️ Fog
+    {"\u2744\uFE0F", snowflake, snowflake_width, snowflake_height},           // ❄️ Snowflake
+    {"\U0001F4A7", drop, drop_width, drop_height},                            // 💧 Droplet
+    {"\U0001F321\uFE0F", thermometer, thermometer_width, thermometer_height}, // 🌡️ Thermometer
+    {"\U0001F326\uFE0F", sun_behind_raincloud, sun_behind_raincloud_width,
+     sun_behind_raincloud_height},                                                        // 🌦️ Sun Behind Rain Cloud
+    {"\u26C5", sun_behind_cloud, sun_behind_cloud_width, sun_behind_cloud_height},        // ⛅ Sun Behind Cloud
+    {"\u26C5\uFE0F", sun_behind_cloud, sun_behind_cloud_width, sun_behind_cloud_height},  // ⛅️ Sun Behind Cloud
+    {"\U0001F328\uFE0F", cloud_with_snow, cloud_with_snow_width, cloud_with_snow_height}, // 🌨️ Cloud with Snow
+    {"\U0001F329\uFE0F", cloud_with_lightning, cloud_with_lightning_width,
+     cloud_with_lightning_height}, // 🌩️ Cloud with Lightning
+    {"\u26C8", cloud_with_lightning_rain, cloud_with_lightning_rain_width,
+     cloud_with_lightning_rain_height}, // ⛈ Cloud with Lightning and Rain
+    {"\u26C8\uFE0F", cloud_with_lightning_rain, cloud_with_lightning_rain_width,
+     cloud_with_lightning_rain_height},                                 // ⛈️ Cloud with Lightning and Rain
+    {"\U0001F32C\uFE0F", wind_face, wind_face_width, wind_face_height}, // 🌬️ Wind Face
+
+    // --- Moon Phases ---
+    {"\U0001F311", new_moon, new_moon_width, new_moon_height},                                     // 🌑 New Moon
+    {"\U0001F312", waxing_crescent_moon, waxing_crescent_moon_width, waxing_crescent_moon_height}, // 🌒 Waxing Crescent Moon
+    {"\U0001F313", first_quarter_moon, first_quarter_moon_width, first_quarter_moon_height},       // 🌓 First Quarter Moon
+    {"\U0001F314", waxing_gibbous_moon, waxing_gibbous_moon_width, waxing_gibbous_moon_height},    // 🌔 Waxing Gibbous Moon
+    {"\U0001F315", full_moon, full_moon_width, full_moon_height},                                  // 🌕 Full Moon
+    {"\U0001F316", waning_gibbous_moon, waning_gibbous_moon_width, waning_gibbous_moon_height},    // 🌖 Waning Gibbous Moon
+    {"\U0001F317", last_quarter_moon, last_quarter_moon_width, last_quarter_moon_height},          // 🌗 Last Quarter Moon
+    {"\U0001F318", waning_crescent_moon, waning_crescent_moon_width, waning_crescent_moon_height}, // 🌘 Waning Crescent Moon
+    {"\U0001F31B", first_quarter_moon_face, first_quarter_moon_face_width,
+     first_quarter_moon_face_height}, // 🌛 First Quarter Moon Face

    // --- Misc Faces ---
    {"\U0001F608", devil, devil_width, devil_height}, // 😈 Smiling Face with Horns
@@ -69,11 +109,47 @@ const Emote emotes[] = {
    // --- Objects ---
    {"\U0001F4A9", poo, poo_width, poo_height},                      // 💩 Pile of Poo
    {"\U0001F514", bell_icon, bell_icon_width, bell_icon_height},    // 🔔 Bell
+    {"\U0001F4CB", clipboard, clipboard_width, clipboard_height},    // 📋 Clipboard
    {"\U0001F36A", cookie, cookie_width, cookie_height},             // 🍪 Cookie
-    {"\U0001F525", Fire, Fire_width, Fire_height},                // 🔥 Fire
-    {"\u2728", Sparkles, Sparkles_width, Sparkles_height},        // ✨ Sparkles
+    {"\U0001F370", shortcake, shortcake_width, shortcake_height},    // 🍰 Shortcake
+    {"\U0001F351", peach, peach_width, peach_height},                // 🍑 Peach
+    {"\U0001F983", turkey, turkey_width, turkey_height},             // 🦃 Turkey
+    {"\U0001F357", turkey_leg, turkey_leg_width, turkey_leg_height}, // 🍗 Poultry Leg
+    {"\U0001F525", fire, fire_width, fire_height},                   // 🔥 Fire
+    {"\u2728", sparkles, sparkles_width, sparkles_height},           // ✨ Sparkles
    {"\U0001F573\uFE0F", hole, hole_width, hole_height},             // 🕳️ Hole
-    {"\U0001F3B3", bowling, bowling_width, bowling_height}        // 🎳 Bowling
+    {"\U0001F3B3", bowling, bowling_width, bowling_height},          // 🎳 Bowling
+
+    // --- Arrows ---
+    {"\u2193", downwards_arrow, downwards_arrow_width, downwards_arrow_height},          // ↓ Downwards Arrow
+    {"\u2193\uFE0E", downwards_arrow, downwards_arrow_width, downwards_arrow_height},    // ↓︎ Downwards Arrow (text)
+    {"\u2193\uFE0F", downwards_arrow, downwards_arrow_width, downwards_arrow_height},    // ↓️ Downwards Arrow (emoji)
+    {"\u2199", south_west_arrow, south_west_arrow_width, south_west_arrow_height},       // ↙ South West Arrow
+    {"\u2199\uFE0E", south_west_arrow, south_west_arrow_width, south_west_arrow_height}, // ↙︎ South West Arrow (text)
+    {"\u2199\uFE0F", south_west_arrow, south_west_arrow_width, south_west_arrow_height}, // ↙️ South West Arrow (emoji)
+    {"\u2190", leftwards_arrow, leftwards_arrow_width, leftwards_arrow_height},          // ← Leftwards Arrow
+    {"\u2190\uFE0E", leftwards_arrow, leftwards_arrow_width, leftwards_arrow_height},    // ←︎ Leftwards Arrow (text)
+    {"\u2190\uFE0F", leftwards_arrow, leftwards_arrow_width, leftwards_arrow_height},    // ←️ Leftwards Arrow (emoji)
+    {"\u2196", north_west_arrow, north_west_arrow_width, north_west_arrow_height},       // ↖ North West Arrow
+    {"\u2196\uFE0E", north_west_arrow, north_west_arrow_width, north_west_arrow_height}, // ↖︎ North West Arrow (text)
+    {"\u2196\uFE0F", north_west_arrow, north_west_arrow_width, north_west_arrow_height}, // ↖️ North West Arrow (emoji)
+    {"\u2191", upwards_arrow, upwards_arrow_width, upwards_arrow_height},                // ↑ Upwards Arrow
+    {"\u2191\uFE0E", upwards_arrow, upwards_arrow_width, upwards_arrow_height},          // ↑︎ Upwards Arrow (text)
+    {"\u2191\uFE0F", upwards_arrow, upwards_arrow_width, upwards_arrow_height},          // ↑️ Upwards Arrow (emoji)
+    {"\u2197", north_east_arrow, north_east_arrow_width, north_east_arrow_height},       // ↗ North East Arrow
+    {"\u2197\uFE0E", north_east_arrow, north_east_arrow_width, north_east_arrow_height}, // ↗︎ North East Arrow (text)
+    {"\u2197\uFE0F", north_east_arrow, north_east_arrow_width, north_east_arrow_height}, // ↗️ North East Arrow (emoji)
+    {"\u2192", rightwards_arrow, rightwards_arrow_width, rightwards_arrow_height},       // → Rightwards Arrow
+    {"\u2192\uFE0E", rightwards_arrow, rightwards_arrow_width, rightwards_arrow_height}, // →︎ Rightwards Arrow (text)
+    {"\u2192\uFE0F", rightwards_arrow, rightwards_arrow_width, rightwards_arrow_height}, // →️ Rightwards Arrow (emoji)
+    {"\u2198", south_east_arrow, south_east_arrow_width, south_east_arrow_height},       // ↘ South East Arrow
+    {"\u2198\uFE0E", south_east_arrow, south_east_arrow_width, south_east_arrow_height}, // ↘︎ South East Arrow (text)
+    {"\u2198\uFE0F", south_east_arrow, south_east_arrow_width, south_east_arrow_height}, // ↘️ South East Arrow (emoji)
+
+    // --- Halloween ---
+    {"\U0001F383", jack_o_lantern, jack_o_lantern_width, jack_o_lantern_height}, // 🎃 Jack-O-Lantern
+    {"\U0001F47B", ghost, ghost_width, ghost_height},                            // 👻 Ghost
+    {"\U0001F480", skull, skull_width, skull_height}                             // 💀 Skull
 #endif
 };

@@ -88,23 +164,23 @@ const unsigned char thumbdown[] PROGMEM = {0xF0, 0x1F, 0x08, 0x20, 0x06, 0x30, 0
                                           0x40, 0x06, 0x70, 0x06, 0x40, 0x06, 0x3F, 0x18, 0x02, 0x20, 0x02,
                                           0x40, 0x04, 0x80, 0x04, 0x80, 0x04, 0x00, 0x03, 0x00, 0x00};

-const unsigned char Smiling_Eyes[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x24, 0x24, 0x52,
+const unsigned char smiling_eyes[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x24, 0x24, 0x52,
                                              0x4A, 0x02, 0x40, 0x02, 0x40, 0x22, 0x44, 0x22, 0x44, 0xC2, 0x43,
                                              0x04, 0x20, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};

-const unsigned char Grinning[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x44, 0x22, 0x42,
+const unsigned char grinning[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x44, 0x22, 0x42,
                                          0x42, 0x02, 0x40, 0x02, 0x40, 0xF2, 0x4F, 0x12, 0x48, 0x22, 0x44,
                                          0xC4, 0x23, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};

-const unsigned char Slightly_Smiling[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x44, 0x22, 0x42,
+const unsigned char slightly_smiling[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x44, 0x22, 0x42,
                                                  0x42, 0x02, 0x40, 0x02, 0x40, 0x12, 0x48, 0x12, 0x48, 0x22, 0x44,
                                                  0xC4, 0x23, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};

-const unsigned char Winking_Face[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x44, 0x20, 0x42,
+const unsigned char winking_face[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x44, 0x20, 0x42,
                                              0x46, 0x02, 0x40, 0x02, 0x40, 0x12, 0x48, 0x12, 0x48, 0x22, 0x44,
                                              0xC4, 0x23, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};

-const unsigned char Grinning_Smiling_Eyes[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x24, 0x24, 0x52,
+const unsigned char grinning_smiling_eyes[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x24, 0x24, 0x52,
                                                       0x4A, 0x02, 0x40, 0xFA, 0x5F, 0x0A, 0x50, 0x0A, 0x50, 0x12, 0x48,
                                                       0x24, 0x24, 0xC4, 0x23, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};

@@ -112,7 +188,7 @@ const unsigned char heart_smile[] PROGMEM = {0x00, 0x00, 0x6C, 0x07, 0x7C, 0x18,
                                             0x0A, 0x02, 0xD8, 0x02, 0xF8, 0x22, 0xFC, 0x20, 0x74, 0xDB, 0x23,
                                             0x1F, 0x00, 0x1F, 0x20, 0x0E, 0x18, 0xE4, 0x07, 0x00, 0x00};

-const unsigned char Heart_eyes[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x54, 0x2A, 0xFA,
+const unsigned char heart_eyes[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x54, 0x2A, 0xFA,
                                            0x5F, 0x72, 0x4E, 0x22, 0x44, 0x02, 0x40, 0x12, 0x48, 0x12, 0x48,
                                            0x24, 0x24, 0xC4, 0x23, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};

@@ -128,19 +204,19 @@ const unsigned char haha[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04,
                                      0x4A, 0x0A, 0x50, 0x0E, 0x70, 0xF2, 0x4F, 0x12, 0x48, 0x32, 0x44,
                                      0xC4, 0x23, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};

-const unsigned char ROFL[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x84, 0x21, 0x84, 0x20, 0x02,
+const unsigned char rofl[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x84, 0x21, 0x84, 0x20, 0x02,
                                      0x4C, 0x02, 0x4A, 0x1A, 0x49, 0x8A, 0x48, 0x42, 0x48, 0x22, 0x44,
                                      0xE4, 0x23, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};

-const unsigned char Smiling_Closed_Eyes[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x24, 0x24, 0x42,
+const unsigned char smiling_closed_eyes[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x24, 0x24, 0x42,
                                                     0x42, 0x22, 0x44, 0x02, 0x40, 0xF2, 0x4F, 0x12, 0x48, 0x22, 0x44,
                                                     0xC4, 0x23, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};

-const unsigned char Grinning_SmilingEyes2[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x24, 0x24, 0x52,
+const unsigned char grinning_smiling_eyes_2[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x24, 0x24, 0x52,
                                                         0x4A, 0x02, 0x40, 0x02, 0x40, 0xF2, 0x4F, 0x12, 0x48, 0x22, 0x44,
                                                         0xC4, 0x23, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};

-const unsigned char Loudly_Crying_Face[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x34, 0x2C, 0x4A,
+const unsigned char loudly_crying_face[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x34, 0x2C, 0x4A,
                                                    0x52, 0x12, 0x48, 0x12, 0x48, 0x92, 0x49, 0x52, 0x4A, 0x52, 0x4A,
                                                    0x54, 0x2A, 0x94, 0x29, 0x18, 0x18, 0xF0, 0x0F, 0x00, 0x00};

@@ -192,7 +268,7 @@ const unsigned char cookie[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04
                                        0x40, 0x02, 0x58, 0x82, 0x5B, 0x92, 0x43, 0x82, 0x43, 0x02, 0x40,
                                        0x64, 0x28, 0x64, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};

-const unsigned char Fire[] PROGMEM = {0x30, 0x00, 0xF0, 0x00, 0xF8, 0x03, 0xF8, 0x07, 0xFC, 0x1F, 0xFC,
+const unsigned char fire[] PROGMEM = {0x30, 0x00, 0xF0, 0x00, 0xF8, 0x03, 0xF8, 0x07, 0xFC, 0x1F, 0xFC,
                                      0x1F, 0xFE, 0x3E, 0x7E, 0x3E, 0x3E, 0x7C, 0x1E, 0x78, 0x1E, 0x70,
                                      0x1C, 0x70, 0x1C, 0x70, 0x38, 0x38, 0x30, 0x38, 0x60, 0x0C};

@@ -200,11 +276,11 @@ const unsigned char peace_sign[] PROGMEM = {0xC0, 0x30, 0x40, 0x29, 0x40, 0x25,
                                            0x0A, 0x54, 0x68, 0x54, 0x58, 0x54, 0x44, 0x3C, 0x22, 0x04, 0x22,
                                            0x04, 0x12, 0x08, 0x10, 0x10, 0x08, 0xE0, 0x07, 0x00, 0x00};

-const unsigned char Praying[] PROGMEM = {0x00, 0x00, 0x40, 0x02, 0xA0, 0x05, 0x90, 0x09, 0x90, 0x09, 0x90,
+const unsigned char praying[] PROGMEM = {0x00, 0x00, 0x40, 0x02, 0xA0, 0x05, 0x90, 0x09, 0x90, 0x09, 0x90,
                                         0x09, 0x98, 0x19, 0x94, 0x29, 0xA4, 0x25, 0xA4, 0x25, 0x84, 0x21,
                                         0x84, 0x21, 0x86, 0x61, 0x4E, 0x72, 0x7F, 0x7E, 0x3F, 0xFC};

-const unsigned char Sparkles[] PROGMEM = {0x00, 0x00, 0x10, 0x00, 0x38, 0x04, 0x10, 0x04, 0x00, 0x0E, 0x00,
+const unsigned char sparkles[] PROGMEM = {0x00, 0x00, 0x10, 0x00, 0x38, 0x04, 0x10, 0x04, 0x00, 0x0E, 0x00,
                                          0x1F, 0x80, 0x3F, 0xE0, 0xFF, 0x80, 0x3F, 0x10, 0x1F, 0x10, 0x0E,
                                          0x38, 0x04, 0xFE, 0x04, 0x38, 0x00, 0x10, 0x00, 0x10, 0x00};

@@ -227,6 +303,178 @@ const unsigned char bowling[] PROGMEM = {0x00, 0x38, 0x00, 0x44, 0x00, 0x44, 0x0
 const unsigned char vulcan_salute[] PROGMEM = {0x08, 0x02, 0x16, 0x0D, 0x15, 0x15, 0x15, 0x15, 0xA9, 0x12, 0x4A,
                                               0x0A, 0x02, 0x38, 0x04, 0x48, 0x04, 0x44, 0x04, 0x22, 0x04, 0x22,
                                               0x04, 0x12, 0x08, 0x10, 0x10, 0x08, 0xE0, 0x07, 0x00, 0x00};
+
+const unsigned char jack_o_lantern[] PROGMEM = {0xC0, 0x00, 0x80, 0x01, 0xB8, 0x1D, 0xC4, 0x23, 0x22, 0x44, 0x05,
+                                                0xA0, 0x31, 0x8C, 0x51, 0x8A, 0x61, 0x86, 0x09, 0x90, 0xB9, 0x9D,
+                                                0x49, 0x92, 0xB2, 0x4D, 0x42, 0x42, 0x04, 0x20, 0xF8, 0x1F};
+
+const unsigned char ghost[] PROGMEM = {0xC0, 0x03, 0xF0, 0x0F, 0xF8, 0x1F, 0xDC, 0x3B, 0xBC, 0x3D, 0xDF,
+                                       0xFB, 0xFF, 0xFF, 0x1F, 0xF8, 0x1E, 0x78, 0x1C, 0x38, 0x3C, 0x3C,
+                                       0xFC, 0x3F, 0xFE, 0x7F, 0xFE, 0x7F, 0xFE, 0x7F, 0x8C, 0x31};
+
+const unsigned char skull[] PROGMEM = {0xE0, 0x07, 0xF8, 0x1F, 0xFC, 0x3F, 0xFE, 0x7F, 0xFE, 0x7F, 0xC7,
+                                       0xE3, 0x87, 0xE1, 0x87, 0xE1, 0x8F, 0xF1, 0xFE, 0x7F, 0x7C, 0x3E,
+                                       0xFC, 0x3F, 0xFC, 0x3F, 0xFC, 0x3F, 0xF8, 0x1F, 0xB0, 0x0D};
+
+const unsigned char vomiting[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x04, 0x20, 0x22,
+                                          0x44, 0x42, 0x42, 0x22, 0x44, 0x02, 0x40, 0x02, 0x40, 0xC2, 0x43,
+                                          0x64, 0x26, 0x64, 0x26, 0x68, 0x16, 0x50, 0x0A, 0xF8, 0x1F};
+
+const unsigned char cool[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0xFC, 0x3F, 0xFA,
+                                      0x5F, 0x72, 0x4E, 0x02, 0x40, 0x12, 0x48, 0x12, 0x48, 0x22, 0x44,
+                                      0xC4, 0x23, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
+
+const unsigned char shortcake[] PROGMEM = {0x00, 0x00, 0x00, 0x0F, 0x80, 0x3F, 0xE0, 0xFC, 0xE0, 0xE1, 0xF0,
+                                           0xB8, 0x10, 0x87, 0xC8, 0x80, 0x3C, 0xE0, 0x06, 0x98, 0x02, 0xC7,
+                                           0xE2, 0x30, 0x1A, 0x0E, 0xC6, 0x01, 0x32, 0x00, 0x0E, 0x00};
+
+const unsigned char caution[] PROGMEM = {0x00, 0x00, 0x80, 0x01, 0xC0, 0x03, 0xC0, 0x03, 0x60, 0x06, 0x60,
+                                         0x06, 0x70, 0x0E, 0x70, 0x0E, 0x78, 0x1E, 0x78, 0x1E, 0x7C, 0x3E,
+                                         0xFC, 0x3F, 0x7E, 0x7E, 0x7E, 0x7E, 0xFC, 0x3F, 0x00, 0x00};
+
+const unsigned char clipboard[] PROGMEM = {0xC0, 0x03, 0x7E, 0x7E, 0xC2, 0x43, 0xFA, 0x5F, 0x0A, 0x5B, 0xFA,
+                                           0x5F, 0x8A, 0x54, 0xFA, 0x5F, 0x4A, 0x58, 0xFA, 0x5F, 0x2A, 0x51,
+                                           0xFA, 0x5F, 0x0A, 0x59, 0xFA, 0x5F, 0x02, 0x40, 0xFE, 0x7F};
+
+const unsigned char snowflake[] PROGMEM = {0x00, 0x00, 0x40, 0x01, 0x88, 0x08, 0x8C, 0x18, 0xD0, 0x05, 0x60,
+                                           0x03, 0x32, 0x26, 0x1C, 0x1C, 0x32, 0x26, 0x60, 0x03, 0xD0, 0x05,
+                                           0x8C, 0x18, 0x88, 0x08, 0x40, 0x01, 0x00, 0x00, 0x00, 0x00};
+
+const unsigned char drop[] PROGMEM = {0x00, 0x00, 0x00, 0x01, 0x80, 0x03, 0xC0, 0x07, 0xE0, 0x0F, 0xE0,
+                                      0x0F, 0xF0, 0x1F, 0xF0, 0x1F, 0xF8, 0x3F, 0xF8, 0x3F, 0xF8, 0x3F,
+                                      0xF8, 0x3F, 0xF0, 0x1F, 0xE0, 0x0F, 0x80, 0x03, 0x00, 0x00};
+
+const unsigned char thermometer[] PROGMEM = {0x00, 0x00, 0x0C, 0x00, 0x16, 0x00, 0x2E, 0x00, 0x5C, 0x00, 0xB8,
+                                             0x00, 0x70, 0x01, 0xE0, 0x02, 0xC0, 0x05, 0x80, 0x3B, 0x00, 0x47,
+                                             0x00, 0xBE, 0x00, 0x9E, 0x00, 0xBE, 0x00, 0x7C, 0x00, 0x38};
+
+const unsigned char sun_behind_raincloud[] PROGMEM = {0xC0, 0x03, 0x20, 0x04, 0x10, 0x0E, 0x38, 0x1F, 0xFC, 0x37, 0xEE,
+                                                      0x77, 0xDE, 0x7B, 0x3E, 0x7C, 0xFC, 0x3F, 0x00, 0x00, 0x48, 0x12,
+                                                      0x48, 0x12, 0x24, 0x09, 0x24, 0x09, 0x00, 0x00, 0x00, 0x00};
+
+const unsigned char sun_behind_cloud[] PROGMEM = {0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x04, 0x0E, 0x3C, 0x1B, 0xFC,
+                                                  0x3B, 0xFE, 0x7B, 0xFA, 0x7B, 0xF6, 0x7D, 0x0C, 0x3E, 0xF8, 0x1F,
+                                                  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+
+const unsigned char cloud_with_snow[] PROGMEM = {0x00, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x38, 0x1F, 0xFC, 0x3F, 0xFE,
+                                                 0x7F, 0xFE, 0x7F, 0xFE, 0x7F, 0xFC, 0x3F, 0x00, 0x00, 0x08, 0x02,
+                                                 0x40, 0x10, 0x00, 0x00, 0x24, 0x09, 0x00, 0x00, 0x00, 0x00};
+
+const unsigned char cloud_with_lightning[] PROGMEM = {0x00, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x38, 0x1F, 0xFC, 0x3F, 0xFE,
+                                                      0x7F, 0xFE, 0x7F, 0xFE, 0x7F, 0xFC, 0x3F, 0x00, 0x01, 0x80, 0x01,
+                                                      0x80, 0x01, 0xC0, 0x07, 0x00, 0x03, 0x00, 0x03, 0x00, 0x01};
+
+const unsigned char cloud_with_lightning_rain[] PROGMEM = {0x00, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x38, 0x1F, 0xFC, 0x3F, 0xFE,
+                                                           0x7F, 0xFE, 0x7F, 0xFE, 0x7F, 0xFC, 0x3F, 0x00, 0x01, 0x90, 0x21,
+                                                           0x90, 0x21, 0xC8, 0x17, 0x08, 0x13, 0x00, 0x03, 0x00, 0x01};
+
+const unsigned char wind_face[] PROGMEM = {0xFF, 0x00, 0x01, 0x01, 0x01, 0x01, 0xF9, 0x00, 0xF9, 0x01, 0xD9,
+                                           0x01, 0x99, 0x01, 0xF9, 0x01, 0xF9, 0x33, 0xFD, 0x4B, 0xFD, 0x85,
+                                           0xFD, 0x9A, 0xFD, 0x75, 0xFD, 0x09, 0xFD, 0x01, 0xFF, 0x00};
+
+const unsigned char new_moon[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x04, 0x20, 0x02,
+                                          0x40, 0x02, 0x40, 0x02, 0x40, 0x02, 0x40, 0x02, 0x40, 0x02, 0x40,
+                                          0x04, 0x20, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
+
+const unsigned char waxing_crescent_moon[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x1F, 0x04, 0x3E, 0x04, 0x3C, 0x02,
+                                                      0x78, 0x02, 0x78, 0x02, 0x78, 0x02, 0x78, 0x02, 0x78, 0x02, 0x78,
+                                                      0x04, 0x3C, 0x04, 0x3E, 0x18, 0x1F, 0xE0, 0x07, 0x00, 0x00};
+
+const unsigned char first_quarter_moon[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x1F, 0x04, 0x3F, 0x04, 0x3F, 0x02,
+                                                    0x7F, 0x02, 0x7F, 0x02, 0x7F, 0x02, 0x7F, 0x02, 0x7F, 0x02, 0x7F,
+                                                    0x04, 0x3F, 0x04, 0x3F, 0x18, 0x1F, 0xE0, 0x07, 0x00, 0x00};
+
+const unsigned char waxing_gibbous_moon[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x1F, 0x84, 0x3F, 0xC4, 0x3F, 0xC2,
+                                                     0x7F, 0xC2, 0x7F, 0xC2, 0x7F, 0xC2, 0x7F, 0xC2, 0x7F, 0xC2, 0x7F,
+                                                     0xC4, 0x3F, 0x84, 0x3F, 0x18, 0x1F, 0xE0, 0x07, 0x00, 0x00};
+
+const unsigned char full_moon[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0xF8, 0x1F, 0xFC, 0x3F, 0xFC, 0x3F, 0xFE,
+                                           0x7F, 0xFE, 0x7F, 0xFE, 0x7F, 0xFE, 0x7F, 0xFE, 0x7F, 0xFE, 0x7F,
+                                           0xFC, 0x3F, 0xFC, 0x3F, 0xF8, 0x1F, 0xE0, 0x07, 0x00, 0x00};
+
+const unsigned char waning_gibbous_moon[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0xF8, 0x18, 0xFC, 0x21, 0xFC, 0x23, 0xFE,
+                                                     0x43, 0xFE, 0x43, 0xFE, 0x43, 0xFE, 0x43, 0xFE, 0x43, 0xFE, 0x43,
+                                                     0xFC, 0x23, 0xFC, 0x21, 0xF8, 0x18, 0xE0, 0x07, 0x00, 0x00};
+
+const unsigned char last_quarter_moon[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0xF8, 0x18, 0xFC, 0x20, 0xFC, 0x20, 0xFE,
+                                                   0x40, 0xFE, 0x40, 0xFE, 0x40, 0xFE, 0x40, 0xFE, 0x40, 0xFE, 0x40,
+                                                   0xFC, 0x20, 0xFC, 0x20, 0xF8, 0x18, 0xE0, 0x07, 0x00, 0x00};
+
+const unsigned char waning_crescent_moon[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0xF8, 0x18, 0x7C, 0x20, 0x3C, 0x20, 0x1E,
+                                                      0x40, 0x1E, 0x40, 0x1E, 0x40, 0x1E, 0x40, 0x1E, 0x40, 0x1E, 0x40,
+                                                      0x3C, 0x20, 0x7C, 0x20, 0xF8, 0x18, 0xE0, 0x07, 0x00, 0x00};
+
+const unsigned char first_quarter_moon_face[] PROGMEM = {0x00, 0x0F, 0x00, 0x12, 0x00, 0x24, 0x00, 0x44, 0x00, 0x48, 0x00,
+                                                         0x88, 0x00, 0x84, 0x80, 0x93, 0x80, 0x80, 0x03, 0x81, 0x8D, 0x80,
+                                                         0x71, 0x40, 0x82, 0x41, 0x02, 0x20, 0x0C, 0x18, 0xF0, 0x07};
+
+const unsigned char peach[] PROGMEM = {0x70, 0x0F, 0x88, 0x10, 0x78, 0x1F, 0x88, 0x11, 0x04, 0x22, 0x02,
+                                       0x44, 0x02, 0x44, 0x02, 0x44, 0x02, 0x44, 0x02, 0x42, 0x02, 0x40,
+                                       0x04, 0x20, 0x04, 0x20, 0x08, 0x10, 0x30, 0x0C, 0xC0, 0x03};
+
+const unsigned char turkey[] PROGMEM = {0x00, 0x00, 0x38, 0x00, 0x44, 0x38, 0x56, 0x54, 0x45, 0x52, 0xE2,
+                                        0x21, 0x2C, 0x56, 0x14, 0x58, 0x0A, 0x37, 0x86, 0x68, 0x82, 0x50,
+                                        0x82, 0x20, 0x04, 0x41, 0xF8, 0x7F, 0x40, 0x02, 0xF0, 0x07};
+
+const unsigned char turkey_leg[] PROGMEM = {0x0C, 0x00, 0x1E, 0x00, 0x1F, 0x00, 0x2F, 0x00, 0x46, 0x00, 0x88,
+                                            0x01, 0x10, 0x0E, 0x20, 0x30, 0x20, 0x40, 0x40, 0x40, 0x40, 0x80,
+                                            0x40, 0x80, 0x80, 0x80, 0x80, 0x80, 0x00, 0x43, 0x00, 0x3C};
+
+const unsigned char south_west_arrow[] PROGMEM = {0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x1C, 0x00, 0x3E, 0x00,
+                                                  0x1F, 0x80, 0x0F, 0xC2, 0x07, 0xE6, 0x03, 0xFE, 0x01, 0xFE, 0x00,
+                                                  0x7E, 0x00, 0x7E, 0x00, 0xFE, 0x00, 0xFE, 0x01, 0x00, 0x00};
+
+const unsigned char south_east_arrow[] PROGMEM = {0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x38, 0x00, 0x7C, 0x00, 0xF8,
+                                                  0x00, 0xF0, 0x01, 0xE0, 0x43, 0xC0, 0x67, 0x80, 0x7F, 0x00, 0x7F,
+                                                  0x00, 0x7E, 0x00, 0x7E, 0x00, 0x7F, 0x80, 0x7F, 0x00, 0x00};
+
+const unsigned char north_west_arrow[] PROGMEM = {0x00, 0x00, 0xFE, 0x01, 0xFE, 0x00, 0x7E, 0x00, 0x7E, 0x00, 0xFE,
+                                                  0x00, 0xFE, 0x01, 0xE6, 0x03, 0xC2, 0x07, 0x80, 0x0F, 0x00, 0x1F,
+                                                  0x00, 0x3E, 0x00, 0x1C, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00};
+
+const unsigned char north_east_arrow[] PROGMEM = {0x00, 0x00, 0x80, 0x7F, 0x00, 0x7F, 0x00, 0x7E, 0x00, 0x7E, 0x00,
+                                                  0x7F, 0x80, 0x7F, 0xC0, 0x67, 0xE0, 0x43, 0xF0, 0x01, 0xF8, 0x00,
+                                                  0x7C, 0x00, 0x38, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00};
+
+const unsigned char downwards_arrow[] PROGMEM = {0x00, 0x00, 0x00, 0x00, 0xC0, 0x03, 0xC0, 0x03, 0xC0, 0x03, 0xC0,
+                                                 0x03, 0xC0, 0x03, 0xC0, 0x03, 0xC0, 0x03, 0xC0, 0x03, 0xFC, 0x3F,
+                                                 0xF8, 0x1F, 0xF0, 0x0F, 0xE0, 0x07, 0xC0, 0x03, 0x80, 0x01};
+
+const unsigned char leftwards_arrow[] PROGMEM = {0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x30, 0x00, 0x38, 0x00, 0x3C,
+                                                 0x00, 0xFE, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0xFE, 0x3F, 0x3C, 0x00,
+                                                 0x38, 0x00, 0x30, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00};
+
+const unsigned char upwards_arrow[] PROGMEM = {0x80, 0x01, 0xC0, 0x03, 0xE0, 0x07, 0xF0, 0x0F, 0xF8, 0x1F, 0xFC,
+                                               0x3F, 0xC0, 0x03, 0xC0, 0x03, 0xC0, 0x03, 0xC0, 0x03, 0xC0, 0x03,
+                                               0xC0, 0x03, 0xC0, 0x03, 0xC0, 0x03, 0x00, 0x00, 0x00, 0x00};
+
+const unsigned char rightwards_arrow[] PROGMEM = {0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x0C, 0x00, 0x1C, 0x00,
+                                                  0x3C, 0xFC, 0x7F, 0xFC, 0xFF, 0xFC, 0xFF, 0xFC, 0x7F, 0x00, 0x3C,
+                                                  0x00, 0x1C, 0x00, 0x0C, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00};
+
+const unsigned char strong[] PROGMEM = {0x38, 0x00, 0x44, 0x00, 0x62, 0x00, 0x42, 0x00, 0x42, 0x00, 0x3A,
+                                        0x00, 0x11, 0x3C, 0x11, 0x42, 0xD1, 0x81, 0x31, 0x82, 0x11, 0x82,
+                                        0x21, 0x80, 0x01, 0x80, 0x01, 0x80, 0x02, 0x40, 0xFC, 0x3F};
+
+const unsigned char check_mark[] PROGMEM = {0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x70, 0x00, 0x3C, 0x00,
+                                            0x1E, 0x00, 0x0F, 0x80, 0x07, 0xC3, 0x03, 0xEE, 0x03, 0xFC, 0x01,
+                                            0xF8, 0x00, 0xF0, 0x00, 0x70, 0x00, 0x60, 0x00, 0x20, 0x00};
+
+const unsigned char house[] PROGMEM = {0x80, 0x01, 0x5C, 0x02, 0x34, 0x04, 0x14, 0x08, 0x0C, 0x10, 0x04,
+                                       0x20, 0x02, 0x40, 0xFF, 0xFF, 0x02, 0x40, 0x7A, 0x5F, 0x4A, 0x55,
+                                       0x4A, 0x5F, 0x6A, 0x55, 0x4A, 0x5F, 0x4A, 0x40, 0xFE, 0x7F};
+
+const unsigned char shrug[] PROGMEM = {0xC0, 0x03, 0x20, 0x04, 0x10, 0x08, 0x50, 0x0A, 0x10, 0x08, 0x90,
+                                       0x09, 0x27, 0xE4, 0x49, 0x92, 0xAA, 0x55, 0x16, 0x68, 0x12, 0x48,
+                                       0x02, 0x40, 0x02, 0x40, 0x0C, 0x30, 0x08, 0x10, 0xF8, 0x1F};
+
+const unsigned char eyes[] PROGMEM = {0x00, 0x00, 0x3C, 0x3C, 0x42, 0x42, 0x81, 0x81, 0x85, 0x85, 0x8F,
+                                      0x8F, 0x8F, 0x8F, 0x8F, 0x8F, 0x8F, 0x8F, 0x8F, 0x8F, 0x8F, 0x8F,
+                                      0x85, 0x85, 0x81, 0x81, 0x42, 0x42, 0x3C, 0x3C, 0x00, 0x00};
+
+const unsigned char eye[] PROGMEM = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x07, 0xF8, 0x1F, 0xF4,
+                                     0x2F, 0x7A, 0x5E, 0x39, 0x9C, 0x39, 0x9C, 0x7A, 0x5E, 0xF4, 0x2F,
+                                     0xF8, 0x1F, 0xE0, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
 #endif

 } // namespace graphics
--- a/src/graphics/emotes.h
+++ b/src/graphics/emotes.h
@@ -22,33 +22,33 @@ extern const int numEmotes;
 extern const unsigned char thumbup[] PROGMEM;
 extern const unsigned char thumbdown[] PROGMEM;

-#define Smiling_Eyes_height 16
-#define Smiling_Eyes_width 16
-extern const unsigned char Smiling_Eyes[] PROGMEM;
+#define smiling_eyes_height 16
+#define smiling_eyes_width 16
+extern const unsigned char smiling_eyes[] PROGMEM;

-#define Grinning_height 16
-#define Grinning_width 16
-extern const unsigned char Grinning[] PROGMEM;
+#define grinning_height 16
+#define grinning_width 16
+extern const unsigned char grinning[] PROGMEM;

-#define Slightly_Smiling_height 16
-#define Slightly_Smiling_width 16
-extern const unsigned char Slightly_Smiling[] PROGMEM;
+#define slightly_smiling_height 16
+#define slightly_smiling_width 16
+extern const unsigned char slightly_smiling[] PROGMEM;

-#define Winking_Face_height 16
-#define Winking_Face_width 16
-extern const unsigned char Winking_Face[] PROGMEM;
+#define winking_face_height 16
+#define winking_face_width 16
+extern const unsigned char winking_face[] PROGMEM;

-#define Grinning_Smiling_Eyes_height 16
-#define Grinning_Smiling_Eyes_width 16
-extern const unsigned char Grinning_Smiling_Eyes[] PROGMEM;
+#define grinning_smiling_eyes_height 16
+#define grinning_smiling_eyes_width 16
+extern const unsigned char grinning_smiling_eyes[] PROGMEM;

 #define heart_smile_height 16
 #define heart_smile_width 16
 extern const unsigned char heart_smile[] PROGMEM;

-#define Heart_eyes_height 16
-#define Heart_eyes_width 16
-extern const unsigned char Heart_eyes[] PROGMEM;
+#define heart_eyes_height 16
+#define heart_eyes_width 16
+extern const unsigned char heart_eyes[] PROGMEM;

 #define question_height 16
 #define question_width 16
@@ -62,21 +62,21 @@ extern const unsigned char bang[] PROGMEM;
 #define haha_width 16
 extern const unsigned char haha[] PROGMEM;

-#define ROFL_height 16
-#define ROFL_width 16
-extern const unsigned char ROFL[] PROGMEM;
+#define rofl_height 16
+#define rofl_width 16
+extern const unsigned char rofl[] PROGMEM;

-#define Smiling_Closed_Eyes_height 16
-#define Smiling_Closed_Eyes_width 16
-extern const unsigned char Smiling_Closed_Eyes[] PROGMEM;
+#define smiling_closed_eyes_height 16
+#define smiling_closed_eyes_width 16
+extern const unsigned char smiling_closed_eyes[] PROGMEM;

-#define Grinning_SmilingEyes2_height 16
-#define Grinning_SmilingEyes2_width 16
-extern const unsigned char Grinning_SmilingEyes2[] PROGMEM;
+#define grinning_smiling_eyes_2_height 16
+#define grinning_smiling_eyes_2_width 16
+extern const unsigned char grinning_smiling_eyes_2[] PROGMEM;

-#define Loudly_Crying_Face_height 16
-#define Loudly_Crying_Face_width 16
-extern const unsigned char Loudly_Crying_Face[] PROGMEM;
+#define loudly_crying_face_height 16
+#define loudly_crying_face_width 16
+extern const unsigned char loudly_crying_face[] PROGMEM;

 #define wave_icon_height 16
 #define wave_icon_width 16
@@ -126,21 +126,21 @@ extern const unsigned char bell_icon[] PROGMEM;
 #define cookie_height 16
 extern const unsigned char cookie[] PROGMEM;

-#define Fire_width 16
-#define Fire_height 16
-extern const unsigned char Fire[] PROGMEM;
+#define fire_width 16
+#define fire_height 16
+extern const unsigned char fire[] PROGMEM;

 #define peace_sign_width 16
 #define peace_sign_height 16
 extern const unsigned char peace_sign[] PROGMEM;

-#define Praying_width 16
-#define Praying_height 16
-extern const unsigned char Praying[] PROGMEM;
+#define praying_width 16
+#define praying_height 16
+extern const unsigned char praying[] PROGMEM;

-#define Sparkles_width 16
-#define Sparkles_height 16
-extern const unsigned char Sparkles[] PROGMEM;
+#define sparkles_width 16
+#define sparkles_height 16
+extern const unsigned char sparkles[] PROGMEM;

 #define clown_width 16
 #define clown_height 16
@@ -161,6 +161,178 @@ extern const unsigned char bowling[] PROGMEM;
 #define vulcan_salute_width 16
 #define vulcan_salute_height 16
 extern const unsigned char vulcan_salute[] PROGMEM;
+
+#define jack_o_lantern_width 16
+#define jack_o_lantern_height 16
+extern const unsigned char jack_o_lantern[] PROGMEM;
+
+#define ghost_width 16
+#define ghost_height 16
+extern const unsigned char ghost[] PROGMEM;
+
+#define skull_width 16
+#define skull_height 16
+extern const unsigned char skull[] PROGMEM;
+
+#define vomiting_width 16
+#define vomiting_height 16
+extern const unsigned char vomiting[] PROGMEM;
+
+#define cool_width 16
+#define cool_height 16
+extern const unsigned char cool[] PROGMEM;
+
+#define shortcake_width 16
+#define shortcake_height 16
+extern const unsigned char shortcake[] PROGMEM;
+
+#define caution_width 16
+#define caution_height 16
+extern const unsigned char caution[] PROGMEM;
+
+#define clipboard_width 16
+#define clipboard_height 16
+extern const unsigned char clipboard[] PROGMEM;
+
+#define snowflake_width 16
+#define snowflake_height 16
+extern const unsigned char snowflake[] PROGMEM;
+
+#define drop_width 16
+#define drop_height 16
+extern const unsigned char drop[] PROGMEM;
+
+#define thermometer_width 16
+#define thermometer_height 16
+extern const unsigned char thermometer[] PROGMEM;
+
+#define sun_behind_raincloud_width 16
+#define sun_behind_raincloud_height 16
+extern const unsigned char sun_behind_raincloud[] PROGMEM;
+
+#define sun_behind_cloud_width 16
+#define sun_behind_cloud_height 16
+extern const unsigned char sun_behind_cloud[] PROGMEM;
+
+#define cloud_with_snow_width 16
+#define cloud_with_snow_height 16
+extern const unsigned char cloud_with_snow[] PROGMEM;
+
+#define cloud_with_lightning_width 16
+#define cloud_with_lightning_height 16
+extern const unsigned char cloud_with_lightning[] PROGMEM;
+
+#define cloud_with_lightning_rain_width 16
+#define cloud_with_lightning_rain_height 16
+extern const unsigned char cloud_with_lightning_rain[] PROGMEM;
+
+#define wind_face_width 16
+#define wind_face_height 16
+extern const unsigned char wind_face[] PROGMEM;
+
+#define new_moon_width 16
+#define new_moon_height 16
+extern const unsigned char new_moon[] PROGMEM;
+
+#define waxing_crescent_moon_width 16
+#define waxing_crescent_moon_height 16
+extern const unsigned char waxing_crescent_moon[] PROGMEM;
+
+#define first_quarter_moon_width 16
+#define first_quarter_moon_height 16
+extern const unsigned char first_quarter_moon[] PROGMEM;
+
+#define waxing_gibbous_moon_width 16
+#define waxing_gibbous_moon_height 16
+extern const unsigned char waxing_gibbous_moon[] PROGMEM;
+
+#define full_moon_width 16
+#define full_moon_height 16
+extern const unsigned char full_moon[] PROGMEM;
+
+#define waning_gibbous_moon_width 16
+#define waning_gibbous_moon_height 16
+extern const unsigned char waning_gibbous_moon[] PROGMEM;
+
+#define last_quarter_moon_width 16
+#define last_quarter_moon_height 16
+extern const unsigned char last_quarter_moon[] PROGMEM;
+
+#define waning_crescent_moon_width 16
+#define waning_crescent_moon_height 16
+extern const unsigned char waning_crescent_moon[] PROGMEM;
+
+#define first_quarter_moon_face_width 16
+#define first_quarter_moon_face_height 16
+extern const unsigned char first_quarter_moon_face[] PROGMEM;
+
+#define peach_width 16
+#define peach_height 16
+extern const unsigned char peach[] PROGMEM;
+
+#define turkey_width 16
+#define turkey_height 16
+extern const unsigned char turkey[] PROGMEM;
+
+#define turkey_leg_width 16
+#define turkey_leg_height 16
+extern const unsigned char turkey_leg[] PROGMEM;
+
+#define south_west_arrow_width 16
+#define south_west_arrow_height 16
+extern const unsigned char south_west_arrow[] PROGMEM;
+
+#define south_east_arrow_width 16
+#define south_east_arrow_height 16
+extern const unsigned char south_east_arrow[] PROGMEM;
+
+#define north_west_arrow_width 16
+#define north_west_arrow_height 16
+extern const unsigned char north_west_arrow[] PROGMEM;
+
+#define north_east_arrow_width 16
+#define north_east_arrow_height 16
+extern const unsigned char north_east_arrow[] PROGMEM;
+
+#define downwards_arrow_width 16
+#define downwards_arrow_height 16
+extern const unsigned char downwards_arrow[] PROGMEM;
+
+#define leftwards_arrow_width 16
+#define leftwards_arrow_height 16
+extern const unsigned char leftwards_arrow[] PROGMEM;
+
+#define upwards_arrow_width 16
+#define upwards_arrow_height 16
+extern const unsigned char upwards_arrow[] PROGMEM;
+
+#define rightwards_arrow_width 16
+#define rightwards_arrow_height 16
+extern const unsigned char rightwards_arrow[] PROGMEM;
+
+#define strong_width 16
+#define strong_height 16
+extern const unsigned char strong[] PROGMEM;
+
+#define check_mark_width 16
+#define check_mark_height 16
+extern const unsigned char check_mark[] PROGMEM;
+
+#define house_width 16
+#define house_height 16
+extern const unsigned char house[] PROGMEM;
+
+#define shrug_width 16
+#define shrug_height 16
+extern const unsigned char shrug[] PROGMEM;
+
+#define eyes_width 16
+#define eyes_height 16
+extern const unsigned char eyes[] PROGMEM;
+
+#define eye_width 16
+#define eye_height 16
+extern const unsigned char eye[] PROGMEM;
 #endif // EXCLUDE_EMOJI

 } // namespace graphics
--- a/src/graphics/niche/InkHUD/Applet.h
+++ b/src/graphics/niche/InkHUD/Applet.h
@@ -88,8 +88,14 @@ class Applet : public GFX
    virtual void onForeground() {}
    virtual void onBackground() {}
    virtual void onShutdown() {}
-    virtual void onButtonShortPress() {} // (System Applets only)
-    virtual void onButtonLongPress() {}  // (System Applets only)
+    virtual void onButtonShortPress() {}
+    virtual void onButtonLongPress() {}
+    virtual void onExitShort() {}
+    virtual void onExitLong() {}
+    virtual void onNavUp() {}
+    virtual void onNavDown() {}
+    virtual void onNavLeft() {}
+    virtual void onNavRight() {}

    virtual bool approveNotification(Notification &n); // Allow an applet to veto a notification

--- a/src/graphics/niche/InkHUD/Applets/System/AlignStick/AlignStickApplet.cpp
+++ b/src/graphics/niche/InkHUD/Applets/System/AlignStick/AlignStickApplet.cpp
@@ -0,0 +1,205 @@
+#ifdef MESHTASTIC_INCLUDE_INKHUD
+
+#include "./AlignStickApplet.h"
+
+using namespace NicheGraphics;
+
+InkHUD::AlignStickApplet::AlignStickApplet()
+{
+    if (!settings->joystick.aligned)
+        bringToForeground();
+}
+
+void InkHUD::AlignStickApplet::onRender()
+{
+    setFont(fontMedium);
+    printAt(0, 0, "Align Joystick:");
+    setFont(fontSmall);
+    std::string instructions = "Move joystick in the direction indicated";
+    printWrapped(0, fontMedium.lineHeight() * 1.5, width(), instructions);
+
+    // Size of the region in which the joystick graphic should fit
+    uint16_t joyXLimit = X(0.8);
+    uint16_t contentH = fontMedium.lineHeight() * 1.5 + fontSmall.lineHeight() * 1;
+    if (getTextWidth(instructions) > width())
+        contentH += fontSmall.lineHeight();
+    uint16_t freeY = height() - contentH - fontSmall.lineHeight() * 1.2;
+    uint16_t joyYLimit = freeY * 0.8;
+
+    // Use the shorter of the two
+    uint16_t joyWidth = joyXLimit < joyYLimit ? joyXLimit : joyYLimit;
+
+    // Center the joystick graphic
+    uint16_t centerX = X(0.5);
+    uint16_t centerY = contentH + freeY * 0.5;
+
+    // Draw joystick graphic
+    drawStick(centerX, centerY, joyWidth);
+
+    setFont(fontSmall);
+    printAt(X(0.5), Y(1.0) - fontSmall.lineHeight() * 0.2, "Long press to skip", CENTER, BOTTOM);
+}
+
+// Draw a scalable joystick graphic
+void InkHUD::AlignStickApplet::drawStick(uint16_t centerX, uint16_t centerY, uint16_t width)
+{
+    if (width < 9) // too small to draw
+        return;
+
+    else if (width < 40) { // only draw up arrow
+        uint16_t chamfer = width < 20 ? 1 : 2;
+
+        // Draw filled up arrow
+        drawDirection(centerX, centerY - width / 4, Direction::UP, width, chamfer, BLACK);
+
+    } else { // large enough to draw the full thing
+        uint16_t chamfer = width < 80 ? 1 : 2;
+        uint16_t stroke = 3; // pixels
+        uint16_t arrowW = width * 0.22;
+        uint16_t hollowW = arrowW - stroke * 2;
+
+        // Draw center circle
+        fillCircle((int16_t)centerX, (int16_t)centerY, (int16_t)(width * 0.2), BLACK);
+        fillCircle((int16_t)centerX, (int16_t)centerY, (int16_t)(width * 0.2) - stroke, WHITE);
+
+        // Draw filled up arrow
+        drawDirection(centerX, centerY - width / 2, Direction::UP, arrowW, chamfer, BLACK);
+
+        // Draw down arrow
+        drawDirection(centerX, centerY + width / 2, Direction::DOWN, arrowW, chamfer, BLACK);
+        drawDirection(centerX, centerY + width / 2 - stroke, Direction::DOWN, hollowW, 0, WHITE);
+
+        // Draw left arrow
+        drawDirection(centerX - width / 2, centerY, Direction::LEFT, arrowW, chamfer, BLACK);
+        drawDirection(centerX - width / 2 + stroke, centerY, Direction::LEFT, hollowW, 0, WHITE);
+
+        // Draw right arrow
+        drawDirection(centerX + width / 2, centerY, Direction::RIGHT, arrowW, chamfer, BLACK);
+        drawDirection(centerX + width / 2 - stroke, centerY, Direction::RIGHT, hollowW, 0, WHITE);
+    }
+}
+
+// Draw a scalable joystick direction arrow
+// a right-triangle with blunted tips
+/*
+            _ <--point
+    ^      / \
+    |     /   \
+   size  /     \
+    |   /       \
+    v  |_________|
+
+*/
+void InkHUD::AlignStickApplet::drawDirection(uint16_t pointX, uint16_t pointY, Direction direction, uint16_t size,
+                                             uint16_t chamfer, Color color)
+{
+    uint16_t chamferW = chamfer * 2 + 1;
+    uint16_t triangleW = size - chamferW;
+
+    // Draw arrow
+    switch (direction) {
+    case Direction::UP:
+        fillRect(pointX - chamfer, pointY, chamferW, triangleW, color);
+        fillRect(pointX - chamfer - triangleW, pointY + triangleW, chamferW + triangleW * 2, chamferW, color);
+        fillTriangle(pointX - chamfer, pointY, pointX - chamfer - triangleW, pointY + triangleW, pointX - chamfer,
+                     pointY + triangleW, color);
+        fillTriangle(pointX + chamfer, pointY, pointX + chamfer + triangleW, pointY + triangleW, pointX + chamfer,
+                     pointY + triangleW, color);
+        break;
+    case Direction::DOWN:
+        fillRect(pointX - chamfer, pointY - triangleW + 1, chamferW, triangleW, color);
+        fillRect(pointX - chamfer - triangleW, pointY - size + 1, chamferW + triangleW * 2, chamferW, color);
+        fillTriangle(pointX - chamfer, pointY, pointX - chamfer - triangleW, pointY - triangleW, pointX - chamfer,
+                     pointY - triangleW, color);
+        fillTriangle(pointX + chamfer, pointY, pointX + chamfer + triangleW, pointY - triangleW, pointX + chamfer,
+                     pointY - triangleW, color);
+        break;
+    case Direction::LEFT:
+        fillRect(pointX, pointY - chamfer, triangleW, chamferW, color);
+        fillRect(pointX + triangleW, pointY - chamfer - triangleW, chamferW, chamferW + triangleW * 2, color);
+        fillTriangle(pointX, pointY - chamfer, pointX + triangleW, pointY - chamfer - triangleW, pointX + triangleW,
+                     pointY - chamfer, color);
+        fillTriangle(pointX, pointY + chamfer, pointX + triangleW, pointY + chamfer + triangleW, pointX + triangleW,
+                     pointY + chamfer, color);
+        break;
+    case Direction::RIGHT:
+        fillRect(pointX - triangleW + 1, pointY - chamfer, triangleW, chamferW, color);
+        fillRect(pointX - size + 1, pointY - chamfer - triangleW, chamferW, chamferW + triangleW * 2, color);
+        fillTriangle(pointX, pointY - chamfer, pointX - triangleW, pointY - chamfer - triangleW, pointX - triangleW,
+                     pointY - chamfer, color);
+        fillTriangle(pointX, pointY + chamfer, pointX - triangleW, pointY + chamfer + triangleW, pointX - triangleW,
+                     pointY + chamfer, color);
+        break;
+    }
+}
+
+void InkHUD::AlignStickApplet::onForeground()
+{
+    // Prevent most other applets from requesting update, and skip their rendering entirely
+    // Another system applet with a higher precedence can potentially ignore this
+    SystemApplet::lockRendering = true;
+    SystemApplet::lockRequests = true;
+
+    handleInput = true; // Intercept the button input for our applet
+}
+
+void InkHUD::AlignStickApplet::onBackground()
+{
+    // Allow normal update behavior to resume
+    SystemApplet::lockRendering = false;
+    SystemApplet::lockRequests = false;
+    SystemApplet::handleInput = false;
+
+    // Need to force an update, as a polite request wouldn't be honored, seeing how we are now in the background
+    // Usually, onBackground is followed by another applet's onForeground (which requests update), but not in this case
+    inkhud->forceUpdate(EInk::UpdateTypes::FULL);
+}
+
+void InkHUD::AlignStickApplet::onButtonLongPress()
+{
+    sendToBackground();
+    inkhud->forceUpdate(EInk::UpdateTypes::FULL);
+}
+
+void InkHUD::AlignStickApplet::onExitLong()
+{
+    sendToBackground();
+    inkhud->forceUpdate(EInk::UpdateTypes::FULL);
+}
+
+void InkHUD::AlignStickApplet::onNavUp()
+{
+    settings->joystick.aligned = true;
+
+    sendToBackground();
+    inkhud->forceUpdate(EInk::UpdateTypes::FULL);
+}
+
+void InkHUD::AlignStickApplet::onNavDown()
+{
+    inkhud->rotateJoystick(2); // 180 deg
+    settings->joystick.aligned = true;
+
+    sendToBackground();
+    inkhud->forceUpdate(EInk::UpdateTypes::FULL);
+}
+
+void InkHUD::AlignStickApplet::onNavLeft()
+{
+    inkhud->rotateJoystick(3); // 270 deg
+    settings->joystick.aligned = true;
+
+    sendToBackground();
+    inkhud->forceUpdate(EInk::UpdateTypes::FULL);
+}
+
+void InkHUD::AlignStickApplet::onNavRight()
+{
+    inkhud->rotateJoystick(1); // 90 deg
+    settings->joystick.aligned = true;
+
+    sendToBackground();
+    inkhud->forceUpdate(EInk::UpdateTypes::FULL);
+}
+
+#endif
--- a/src/graphics/niche/InkHUD/Applets/System/AlignStick/AlignStickApplet.h
+++ b/src/graphics/niche/InkHUD/Applets/System/AlignStick/AlignStickApplet.h
@@ -0,0 +1,50 @@
+#ifdef MESHTASTIC_INCLUDE_INKHUD
+
+/*
+
+System Applet for manually aligning the joystick with the screen
+
+should be run at startup if the joystick is enabled
+and not aligned to the screen
+
+*/
+
+#pragma once
+
+#include "configuration.h"
+
+#include "graphics/niche/InkHUD/SystemApplet.h"
+
+namespace NicheGraphics::InkHUD
+{
+
+class AlignStickApplet : public SystemApplet
+{
+  public:
+    AlignStickApplet();
+
+    void onRender() override;
+    void onForeground() override;
+    void onBackground() override;
+    void onButtonLongPress() override;
+    void onExitLong() override;
+    void onNavUp() override;
+    void onNavDown() override;
+    void onNavLeft() override;
+    void onNavRight() override;
+
+  protected:
+    enum Direction {
+        UP,
+        DOWN,
+        LEFT,
+        RIGHT,
+    };
+
+    void drawStick(uint16_t centerX, uint16_t centerY, uint16_t width);
+    void drawDirection(uint16_t pointX, uint16_t pointY, Direction direction, uint16_t size, uint16_t chamfer, Color color);
+};
+
+} // namespace NicheGraphics::InkHUD
+
+#endif
--- a/src/graphics/niche/InkHUD/Applets/System/Menu/MenuAction.h
+++ b/src/graphics/niche/InkHUD/Applets/System/Menu/MenuAction.h
@@ -30,6 +30,7 @@ enum MenuAction {
    TOGGLE_AUTOSHOW_APPLET,
    SET_RECENTS,
    ROTATE,
+    ALIGN_JOYSTICK,
    LAYOUT,
    TOGGLE_BATTERY_ICON,
    TOGGLE_NOTIFICATIONS,
--- a/src/graphics/niche/InkHUD/Applets/System/Menu/MenuApplet.cpp
+++ b/src/graphics/niche/InkHUD/Applets/System/Menu/MenuApplet.cpp
@@ -178,6 +178,10 @@ void InkHUD::MenuApplet::execute(MenuItem item)
        inkhud->rotate();
        break;

+    case ALIGN_JOYSTICK:
+        inkhud->openAlignStick();
+        break;
+
    case LAYOUT:
        // Todo: smarter incrementing of tile count
        settings->userTiles.count++;
@@ -287,14 +291,17 @@ void InkHUD::MenuApplet::showPage(MenuPage page)
        // items.push_back(MenuItem("Display Off", MenuPage::EXIT)); // TODO
        items.push_back(MenuItem("Save & Shut Down", MenuAction::SHUTDOWN));
        items.push_back(MenuItem("Exit", MenuPage::EXIT));
+        previousPage = MenuPage::EXIT;
        break;

    case SEND:
        populateSendPage();
+        previousPage = MenuPage::ROOT;
        break;

    case CANNEDMESSAGE_RECIPIENT:
        populateRecipientPage();
+        previousPage = MenuPage::OPTIONS;
        break;

    case OPTIONS:
@@ -321,6 +328,8 @@ void InkHUD::MenuApplet::showPage(MenuPage page)
        if (settings->userTiles.maxCount > 1)
            items.push_back(MenuItem("Layout", MenuAction::LAYOUT, MenuPage::OPTIONS));
        items.push_back(MenuItem("Rotate", MenuAction::ROTATE, MenuPage::OPTIONS));
+        if (settings->joystick.enabled)
+            items.push_back(MenuItem("Align Joystick", MenuAction::ALIGN_JOYSTICK, MenuPage::EXIT));
        items.push_back(MenuItem("Notifications", MenuAction::TOGGLE_NOTIFICATIONS, MenuPage::OPTIONS,
                                 &settings->optionalFeatures.notifications));
        items.push_back(MenuItem("Battery Icon", MenuAction::TOGGLE_BATTERY_ICON, MenuPage::OPTIONS,
@@ -332,20 +341,24 @@ void InkHUD::MenuApplet::showPage(MenuPage page)
        items.push_back(
            MenuItem("12-Hour Clock", MenuAction::TOGGLE_12H_CLOCK, MenuPage::OPTIONS, &config.display.use_12h_clock));
        items.push_back(MenuItem("Exit", MenuPage::EXIT));
+        previousPage = MenuPage::ROOT;
        break;

    case APPLETS:
        populateAppletPage();
        items.push_back(MenuItem("Exit", MenuPage::EXIT));
+        previousPage = MenuPage::OPTIONS;
        break;

    case AUTOSHOW:
        populateAutoshowPage();
        items.push_back(MenuItem("Exit", MenuPage::EXIT));
+        previousPage = MenuPage::OPTIONS;
        break;

    case RECENTS:
        populateRecentsPage();
+        previousPage = MenuPage::OPTIONS;
        break;

    case EXIT:
@@ -479,12 +492,21 @@ void InkHUD::MenuApplet::onButtonShortPress()
    // Push the auto-close timer back
    OSThread::setIntervalFromNow(MENU_TIMEOUT_SEC * 1000UL);

+    if (!settings->joystick.enabled) {
        // Move menu cursor to next entry, then update
        if (cursorShown)
            cursor = (cursor + 1) % items.size();
        else
            cursorShown = true;
        requestUpdate(Drivers::EInk::UpdateTypes::FAST);
+    } else {
+        if (cursorShown)
+            execute(items.at(cursor));
+        else
+            showPage(MenuPage::EXIT);
+        if (!wantsToRender())
+            requestUpdate(Drivers::EInk::UpdateTypes::FAST);
+    }
 }

 void InkHUD::MenuApplet::onButtonLongPress()
@@ -504,6 +526,62 @@ void InkHUD::MenuApplet::onButtonLongPress()
        requestUpdate(Drivers::EInk::UpdateTypes::FAST);
 }

+void InkHUD::MenuApplet::onExitShort()
+{
+    // Exit the menu
+    showPage(MenuPage::EXIT);
+
+    requestUpdate(Drivers::EInk::UpdateTypes::FAST);
+}
+
+void InkHUD::MenuApplet::onNavUp()
+{
+    OSThread::setIntervalFromNow(MENU_TIMEOUT_SEC * 1000UL);
+
+    // Move menu cursor to previous entry, then update
+    if (cursor == 0)
+        cursor = items.size() - 1;
+    else
+        cursor--;
+
+    if (!cursorShown)
+        cursorShown = true;
+
+    requestUpdate(Drivers::EInk::UpdateTypes::FAST);
+}
+
+void InkHUD::MenuApplet::onNavDown()
+{
+    OSThread::setIntervalFromNow(MENU_TIMEOUT_SEC * 1000UL);
+
+    // Move menu cursor to next entry, then update
+    if (cursorShown)
+        cursor = (cursor + 1) % items.size();
+    else
+        cursorShown = true;
+
+    requestUpdate(Drivers::EInk::UpdateTypes::FAST);
+}
+
+void InkHUD::MenuApplet::onNavLeft()
+{
+    OSThread::setIntervalFromNow(MENU_TIMEOUT_SEC * 1000UL);
+
+    // Go to the previous menu page
+    showPage(previousPage);
+    requestUpdate(Drivers::EInk::UpdateTypes::FAST);
+}
+
+void InkHUD::MenuApplet::onNavRight()
+{
+    OSThread::setIntervalFromNow(MENU_TIMEOUT_SEC * 1000UL);
+
+    if (cursorShown)
+        execute(items.at(cursor));
+    if (!wantsToRender())
+        requestUpdate(Drivers::EInk::UpdateTypes::FAST);
+}
+
 // Dynamically create MenuItem entries for activating / deactivating Applets, for the "Applet Selection" submenu
 void InkHUD::MenuApplet::populateAppletPage()
 {
--- a/src/graphics/niche/InkHUD/Applets/System/Menu/MenuApplet.h
+++ b/src/graphics/niche/InkHUD/Applets/System/Menu/MenuApplet.h
@@ -27,6 +27,11 @@ class MenuApplet : public SystemApplet, public concurrency::OSThread
    void onBackground() override;
    void onButtonShortPress() override;
    void onButtonLongPress() override;
+    void onExitShort() override;
+    void onNavUp() override;
+    void onNavDown() override;
+    void onNavLeft() override;
+    void onNavRight() override;
    void onRender() override;

    void show(Tile *t); // Open the menu, onto a user tile
@@ -52,6 +57,7 @@ class MenuApplet : public SystemApplet, public concurrency::OSThread
    void freeCannedMessageResources();                                      // Clear MenuApplet's canned message processing data

    MenuPage currentPage = MenuPage::ROOT;
+    MenuPage previousPage = MenuPage::EXIT;
    uint8_t cursor = 0;       // Which menu item is currently highlighted
    bool cursorShown = false; // Is *any* item highlighted? (Root menu: no initial selection)

--- a/src/graphics/niche/InkHUD/Applets/System/Notification/NotificationApplet.cpp
+++ b/src/graphics/niche/InkHUD/Applets/System/Notification/NotificationApplet.cpp
@@ -153,6 +153,42 @@ void InkHUD::NotificationApplet::onButtonLongPress()
    inkhud->forceUpdate(EInk::UpdateTypes::FULL);
 }

+void InkHUD::NotificationApplet::onExitShort()
+{
+    dismiss();
+    inkhud->forceUpdate(EInk::UpdateTypes::FULL);
+}
+
+void InkHUD::NotificationApplet::onExitLong()
+{
+    dismiss();
+    inkhud->forceUpdate(EInk::UpdateTypes::FULL);
+}
+
+void InkHUD::NotificationApplet::onNavUp()
+{
+    dismiss();
+    inkhud->forceUpdate(EInk::UpdateTypes::FULL);
+}
+
+void InkHUD::NotificationApplet::onNavDown()
+{
+    dismiss();
+    inkhud->forceUpdate(EInk::UpdateTypes::FULL);
+}
+
+void InkHUD::NotificationApplet::onNavLeft()
+{
+    dismiss();
+    inkhud->forceUpdate(EInk::UpdateTypes::FULL);
+}
+
+void InkHUD::NotificationApplet::onNavRight()
+{
+    dismiss();
+    inkhud->forceUpdate(EInk::UpdateTypes::FULL);
+}
+
 // Ask the WindowManager to check whether any displayed applets are already displaying the info from this notification
 // Called internally when we first get a "notifiable event", and then again before render,
 // in case autoshow swapped which applet was displayed
--- a/src/graphics/niche/InkHUD/Applets/System/Notification/NotificationApplet.h
+++ b/src/graphics/niche/InkHUD/Applets/System/Notification/NotificationApplet.h
@@ -31,6 +31,12 @@ class NotificationApplet : public SystemApplet
    void onBackground() override;
    void onButtonShortPress() override;
    void onButtonLongPress() override;
+    void onExitShort() override;
+    void onExitLong() override;
+    void onNavUp() override;
+    void onNavDown() override;
+    void onNavLeft() override;
+    void onNavRight() override;

    int onReceiveTextMessage(const meshtastic_MeshPacket *p);

--- a/src/graphics/niche/InkHUD/Applets/System/Tips/TipsApplet.cpp
+++ b/src/graphics/niche/InkHUD/Applets/System/Tips/TipsApplet.cpp
@@ -112,12 +112,21 @@ void InkHUD::TipsApplet::onRender()
        setFont(fontSmall);
        int16_t cursorY = fontMedium.lineHeight() * 1.5;

+        if (!settings->joystick.enabled) {
            printAt(0, cursorY, "User Button");
            cursorY += fontSmall.lineHeight() * 1.2;
            printAt(0, cursorY, "- short press: next");
            cursorY += fontSmall.lineHeight() * 1.2;
            printAt(0, cursorY, "- long press: select / open menu");
+        } else {
+            printAt(0, cursorY, "Joystick");
+            cursorY += fontSmall.lineHeight() * 1.2;
+            printAt(0, cursorY, "- open menu / select");
            cursorY += fontSmall.lineHeight() * 1.5;
+            printAt(0, cursorY, "Exit Button");
+            cursorY += fontSmall.lineHeight() * 1.2;
+            printAt(0, cursorY, "- switch tile / close menu");
+        }

        printAt(0, Y(1.0), "Press button to continue", LEFT, BOTTOM);
    } break;
@@ -127,8 +136,13 @@ void InkHUD::TipsApplet::onRender()
        printAt(0, 0, "Tip: Rotation");

        setFont(fontSmall);
+        if (!settings->joystick.enabled) {
            printWrapped(0, fontMedium.lineHeight() * 1.5, width(),
                         "To rotate the display, use the InkHUD menu. Long-press the user button > Options > Rotate.");
+        } else {
+            printWrapped(0, fontMedium.lineHeight() * 1.5, width(),
+                         "To rotate the display, use the InkHUD menu. Press the user button > Options > Rotate.");
+        }

        printAt(0, Y(1.0), "Press button to continue", LEFT, BOTTOM);

@@ -232,4 +246,10 @@ void InkHUD::TipsApplet::onButtonShortPress()
        requestUpdate();
 }

+// Functions the same as the user button in this instance
+void InkHUD::TipsApplet::onExitShort()
+{
+    onButtonShortPress();
+}
+
 #endif
--- a/src/graphics/niche/InkHUD/Applets/System/Tips/TipsApplet.h
+++ b/src/graphics/niche/InkHUD/Applets/System/Tips/TipsApplet.h
@@ -36,6 +36,7 @@ class TipsApplet : public SystemApplet
    void onForeground() override;
    void onBackground() override;
    void onButtonShortPress() override;
+    void onExitShort() override;

  protected:
    void renderWelcome(); // Very first screen of tutorial
--- a/src/graphics/niche/InkHUD/Events.cpp
+++ b/src/graphics/niche/InkHUD/Events.cpp
@@ -55,10 +55,15 @@ void InkHUD::Events::onButtonShort()
    }

    // If no system applet is handling input, default behavior instead is to cycle applets
-    if (consumer)
+    // or open menu if joystick is enabled
+    if (consumer) {
        consumer->onButtonShortPress();
-    else if (!dismissedExt) // Don't change applet if this button press silenced the external notification module
+    } else if (!dismissedExt) { // Don't change applet if this button press silenced the external notification module
+        if (!settings->joystick.enabled)
            inkhud->nextApplet();
+        else
+            inkhud->openMenu();
+    }
 }

 void InkHUD::Events::onButtonLong()
@@ -83,6 +88,156 @@ void InkHUD::Events::onButtonLong()
        inkhud->openMenu();
 }

+void InkHUD::Events::onExitShort()
+{
+    if (settings->joystick.enabled) {
+        // Audio feedback (via buzzer)
+        // Short tone
+        playChirp();
+        // Cancel any beeping, buzzing, blinking
+        // Some button handling suppressed if we are dismissing an external notification (see below)
+        bool dismissedExt = dismissExternalNotification();
+
+        // Check which system applet wants to handle the button press (if any)
+        SystemApplet *consumer = nullptr;
+        for (SystemApplet *sa : inkhud->systemApplets) {
+            if (sa->handleInput) {
+                consumer = sa;
+                break;
+            }
+        }
+
+        // If no system applet is handling input, default behavior instead is change tiles
+        if (consumer)
+            consumer->onExitShort();
+        else if (!dismissedExt) // Don't change tile if this button press silenced the external notification module
+            inkhud->nextTile();
+    }
+}
+
+void InkHUD::Events::onExitLong()
+{
+    if (settings->joystick.enabled) {
+        // Audio feedback (via buzzer)
+        // Slightly longer than playChirp
+        playBoop();
+
+        // Check which system applet wants to handle the button press (if any)
+        SystemApplet *consumer = nullptr;
+        for (SystemApplet *sa : inkhud->systemApplets) {
+            if (sa->handleInput) {
+                consumer = sa;
+                break;
+            }
+        }
+
+        if (consumer)
+            consumer->onExitLong();
+    }
+}
+
+void InkHUD::Events::onNavUp()
+{
+    if (settings->joystick.enabled) {
+        // Audio feedback (via buzzer)
+        // Short tone
+        playChirp();
+        // Cancel any beeping, buzzing, blinking
+        // Some button handling suppressed if we are dismissing an external notification (see below)
+        bool dismissedExt = dismissExternalNotification();
+
+        // Check which system applet wants to handle the button press (if any)
+        SystemApplet *consumer = nullptr;
+        for (SystemApplet *sa : inkhud->systemApplets) {
+            if (sa->handleInput) {
+                consumer = sa;
+                break;
+            }
+        }
+
+        if (consumer)
+            consumer->onNavUp();
+    }
+}
+
+void InkHUD::Events::onNavDown()
+{
+    if (settings->joystick.enabled) {
+        // Audio feedback (via buzzer)
+        // Short tone
+        playChirp();
+        // Cancel any beeping, buzzing, blinking
+        // Some button handling suppressed if we are dismissing an external notification (see below)
+        bool dismissedExt = dismissExternalNotification();
+
+        // Check which system applet wants to handle the button press (if any)
+        SystemApplet *consumer = nullptr;
+        for (SystemApplet *sa : inkhud->systemApplets) {
+            if (sa->handleInput) {
+                consumer = sa;
+                break;
+            }
+        }
+
+        if (consumer)
+            consumer->onNavDown();
+    }
+}
+
+void InkHUD::Events::onNavLeft()
+{
+    if (settings->joystick.enabled) {
+        // Audio feedback (via buzzer)
+        // Short tone
+        playChirp();
+        // Cancel any beeping, buzzing, blinking
+        // Some button handling suppressed if we are dismissing an external notification (see below)
+        bool dismissedExt = dismissExternalNotification();
+
+        // Check which system applet wants to handle the button press (if any)
+        SystemApplet *consumer = nullptr;
+        for (SystemApplet *sa : inkhud->systemApplets) {
+            if (sa->handleInput) {
+                consumer = sa;
+                break;
+            }
+        }
+
+        // If no system applet is handling input, default behavior instead is to cycle applets
+        if (consumer)
+            consumer->onNavLeft();
+        else if (!dismissedExt) // Don't change applet if this button press silenced the external notification module
+            inkhud->prevApplet();
+    }
+}
+
+void InkHUD::Events::onNavRight()
+{
+    if (settings->joystick.enabled) {
+        // Audio feedback (via buzzer)
+        // Short tone
+        playChirp();
+        // Cancel any beeping, buzzing, blinking
+        // Some button handling suppressed if we are dismissing an external notification (see below)
+        bool dismissedExt = dismissExternalNotification();
+
+        // Check which system applet wants to handle the button press (if any)
+        SystemApplet *consumer = nullptr;
+        for (SystemApplet *sa : inkhud->systemApplets) {
+            if (sa->handleInput) {
+                consumer = sa;
+                break;
+            }
+        }
+
+        // If no system applet is handling input, default behavior instead is to cycle applets
+        if (consumer)
+            consumer->onNavRight();
+        else if (!dismissedExt) // Don't change applet if this button press silenced the external notification module
+            inkhud->nextApplet();
+    }
+}
+
 // Callback for deepSleepObserver
 // Returns 0 to signal that we agree to sleep now
 int InkHUD::Events::beforeDeepSleep(void *unused)
--- a/src/graphics/niche/InkHUD/Events.h
+++ b/src/graphics/niche/InkHUD/Events.h
@@ -29,6 +29,12 @@ class Events

    void onButtonShort(); // User button: short press
    void onButtonLong();  // User button: long press
+    void onExitShort();   // Exit button: short press
+    void onExitLong();    // Exit button: long press
+    void onNavUp();       // Navigate up
+    void onNavDown();     // Navigate down
+    void onNavLeft();     // Navigate left
+    void onNavRight();    // Navigate right

    int beforeDeepSleep(void *unused);                             // Prepare for shutdown
    int beforeReboot(void *unused);                                // Prepare for reboot
--- a/src/graphics/niche/InkHUD/InkHUD.cpp
+++ b/src/graphics/niche/InkHUD/InkHUD.cpp
@@ -80,6 +80,94 @@ void InkHUD::InkHUD::longpress()
    events->onButtonLong();
 }

+// Call this when your exit button gets a short press
+void InkHUD::InkHUD::exitShort()
+{
+    events->onExitShort();
+}
+
+// Call this when your exit button gets a long press
+void InkHUD::InkHUD::exitLong()
+{
+    events->onExitLong();
+}
+
+// Call this when your joystick gets an up input
+void InkHUD::InkHUD::navUp()
+{
+    switch ((persistence->settings.rotation + persistence->settings.joystick.alignment) % 4) {
+    case 1: // 90 deg
+        events->onNavLeft();
+        break;
+    case 2: // 180 deg
+        events->onNavDown();
+        break;
+    case 3: // 270 deg
+        events->onNavRight();
+        break;
+    default: // 0 deg
+        events->onNavUp();
+        break;
+    }
+}
+
+// Call this when your joystick gets a down input
+void InkHUD::InkHUD::navDown()
+{
+    switch ((persistence->settings.rotation + persistence->settings.joystick.alignment) % 4) {
+    case 1: // 90 deg
+        events->onNavRight();
+        break;
+    case 2: // 180 deg
+        events->onNavUp();
+        break;
+    case 3: // 270 deg
+        events->onNavLeft();
+        break;
+    default: // 0 deg
+        events->onNavDown();
+        break;
+    }
+}
+
+// Call this when your joystick gets a left input
+void InkHUD::InkHUD::navLeft()
+{
+    switch ((persistence->settings.rotation + persistence->settings.joystick.alignment) % 4) {
+    case 1: // 90 deg
+        events->onNavDown();
+        break;
+    case 2: // 180 deg
+        events->onNavRight();
+        break;
+    case 3: // 270 deg
+        events->onNavUp();
+        break;
+    default: // 0 deg
+        events->onNavLeft();
+        break;
+    }
+}
+
+// Call this when your joystick gets a right input
+void InkHUD::InkHUD::navRight()
+{
+    switch ((persistence->settings.rotation + persistence->settings.joystick.alignment) % 4) {
+    case 1: // 90 deg
+        events->onNavUp();
+        break;
+    case 2: // 180 deg
+        events->onNavLeft();
+        break;
+    case 3: // 270 deg
+        events->onNavDown();
+        break;
+    default: // 0 deg
+        events->onNavRight();
+        break;
+    }
+}
+
 // Cycle the next user applet to the foreground
 // Only activated applets are cycled
 // If user has a multi-applet layout, the applets will cycle on the "focused tile"
@@ -88,6 +176,14 @@ void InkHUD::InkHUD::nextApplet()
    windowManager->nextApplet();
 }

+// Cycle the previous user applet to the foreground
+// Only activated applets are cycled
+// If user has a multi-applet layout, the applets will cycle on the "focused tile"
+void InkHUD::InkHUD::prevApplet()
+{
+    windowManager->prevApplet();
+}
+
 // Show the menu (on the the focused tile)
 // The applet previously displayed there will be restored once the menu closes
 void InkHUD::InkHUD::openMenu()
@@ -95,6 +191,12 @@ void InkHUD::InkHUD::openMenu()
    windowManager->openMenu();
 }

+// Bring AlignStick applet to the foreground
+void InkHUD::InkHUD::openAlignStick()
+{
+    windowManager->openAlignStick();
+}
+
 // In layouts where multiple applets are shown at once, change which tile is focused
 // The focused tile in the one which cycles applets on button short press, and displays menu on long press
 void InkHUD::InkHUD::nextTile()
@@ -102,12 +204,26 @@ void InkHUD::InkHUD::nextTile()
    windowManager->nextTile();
 }

+// In layouts where multiple applets are shown at once, change which tile is focused
+// The focused tile in the one which cycles applets on button short press, and displays menu on long press
+void InkHUD::InkHUD::prevTile()
+{
+    windowManager->prevTile();
+}
+
 // Rotate the display image by 90 degrees
 void InkHUD::InkHUD::rotate()
 {
    windowManager->rotate();
 }

+// rotate the joystick in 90 degree increments
+void InkHUD::InkHUD::rotateJoystick(uint8_t angle)
+{
+    persistence->settings.joystick.alignment += angle;
+    persistence->settings.joystick.alignment %= 4;
+}
+
 // Show / hide the battery indicator in top-right
 void InkHUD::InkHUD::toggleBatteryIcon()
 {
--- a/src/graphics/niche/InkHUD/InkHUD.h
+++ b/src/graphics/niche/InkHUD/InkHUD.h
@@ -55,15 +55,25 @@ class InkHUD

    void shortpress();
    void longpress();
+    void exitShort();
+    void exitLong();
+    void navUp();
+    void navDown();
+    void navLeft();
+    void navRight();

    // Trigger UI changes
    // - called by various InkHUD components
    // - suitable(?) for use by aux button, connected in variant nicheGraphics.h

    void nextApplet();
+    void prevApplet();
    void openMenu();
+    void openAlignStick();
    void nextTile();
+    void prevTile();
    void rotate();
+    void rotateJoystick(uint8_t angle = 1); // rotate 90 deg by default
    void toggleBatteryIcon();

    // Updating the display
--- a/src/graphics/niche/InkHUD/Persistence.h
+++ b/src/graphics/niche/InkHUD/Persistence.h
@@ -29,7 +29,7 @@ class Persistence

    // Used to invalidate old settings, if needed
    // Version 0 is reserved for testing, and will always load defaults
-    static constexpr uint32_t SETTINGS_VERSION = 2;
+    static constexpr uint32_t SETTINGS_VERSION = 3;

    struct Settings {
        struct Meta {
@@ -96,6 +96,19 @@ class Persistence
            bool safeShutdownSeen = false;
        } tips;

+        // Joystick settings for enabling and aligning to the screen
+        struct Joystick {
+            // Modifies the UI for joystick use
+            bool enabled = false;
+
+            // gets set to true when AlignStick applet is completed
+            bool aligned = false;
+
+            // Rotation of the joystick
+            // Multiples of 90 degrees clockwise
+            uint8_t alignment = 0;
+        } joystick;
+
        // Rotation of the display
        // Multiples of 90 degrees clockwise
        // Most commonly: rotation is 0 when flex connector is oriented below display
--- a/src/graphics/niche/InkHUD/PlatformioConfig.ini
+++ b/src/graphics/niche/InkHUD/PlatformioConfig.ini
@@ -8,4 +8,5 @@ build_flags =
  -D MESHTASTIC_EXCLUDE_INPUTBROKER ; Suppress default input handling
  -D HAS_BUTTON=0 ; Suppress default ButtonThread
 lib_deps =
+  # TODO renovate
  https://github.com/ZinggJM/GFX_Root#2.0.0 ; Used by InkHUD as a "slimmer" version of AdafruitGFX
--- a/src/graphics/niche/InkHUD/WindowManager.cpp
+++ b/src/graphics/niche/InkHUD/WindowManager.cpp
@@ -2,6 +2,7 @@

 #include "./WindowManager.h"

+#include "./Applets/System/AlignStick/AlignStickApplet.h"
 #include "./Applets/System/BatteryIcon/BatteryIconApplet.h"
 #include "./Applets/System/Logo/LogoApplet.h"
 #include "./Applets/System/Menu/MenuApplet.h"
@@ -98,6 +99,38 @@ void InkHUD::WindowManager::nextTile()
        userTiles.at(settings->userTiles.focused)->requestHighlight();
 }

+// Focus on a different tile but decrement index
+void InkHUD::WindowManager::prevTile()
+{
+    // Close the menu applet if open
+    // We don't *really* want to do this, but it simplifies handling *a lot*
+    MenuApplet *menu = (MenuApplet *)inkhud->getSystemApplet("Menu");
+    bool menuWasOpen = false;
+    if (menu->isForeground()) {
+        menu->sendToBackground();
+        menuWasOpen = true;
+    }
+
+    // Swap to next tile
+    if (settings->userTiles.focused == 0)
+        settings->userTiles.focused = settings->userTiles.count - 1;
+    else
+        settings->userTiles.focused--;
+
+    // Make sure that we don't get stuck on the placeholder tile
+    refocusTile();
+
+    if (menuWasOpen)
+        menu->show(userTiles.at(settings->userTiles.focused));
+
+    // Ask the tile to draw an indicator showing which tile is now focused
+    // Requests a render
+    // We only draw this indicator if the device uses an aux button to switch tiles.
+    // Assume aux button is used to switch tiles if the "next tile" menu item is hidden
+    if (!settings->optionalMenuItems.nextTile)
+        userTiles.at(settings->userTiles.focused)->requestHighlight();
+}
+
 // Show the menu (on the the focused tile)
 // The applet previously displayed there will be restored once the menu closes
 void InkHUD::WindowManager::openMenu()
@@ -106,6 +139,15 @@ void InkHUD::WindowManager::openMenu()
    menu->show(userTiles.at(settings->userTiles.focused));
 }

+// Bring the AlignStick applet to the foreground
+void InkHUD::WindowManager::openAlignStick()
+{
+    if (settings->joystick.enabled) {
+        AlignStickApplet *alignStick = (AlignStickApplet *)inkhud->getSystemApplet("AlignStick");
+        alignStick->bringToForeground();
+    }
+}
+
 // On the currently focussed tile: cycle to the next available user applet
 // Applets available for this must be activated, and not already displayed on another tile
 void InkHUD::WindowManager::nextApplet()
@@ -155,6 +197,59 @@ void InkHUD::WindowManager::nextApplet()
    inkhud->forceUpdate(EInk::UpdateTypes::FAST); // bringToForeground already requested, but we're manually forcing FAST
 }

+// On the currently focussed tile: cycle to the previous available user applet
+// Applets available for this must be activated, and not already displayed on another tile
+void InkHUD::WindowManager::prevApplet()
+{
+    Tile *t = userTiles.at(settings->userTiles.focused);
+
+    // Abort if zero applets available
+    // nullptr means WindowManager::refocusTile determined that there were no available applets
+    if (!t->getAssignedApplet())
+        return;
+
+    // Find the index of the applet currently shown on the tile
+    uint8_t appletIndex = -1;
+    for (uint8_t i = 0; i < inkhud->userApplets.size(); i++) {
+        if (inkhud->userApplets.at(i) == t->getAssignedApplet()) {
+            appletIndex = i;
+            break;
+        }
+    }
+
+    // Confirm that we did find the applet
+    assert(appletIndex != (uint8_t)-1);
+
+    // Iterate forward through the WindowManager::applets, looking for the previous valid applet
+    Applet *prevValidApplet = nullptr;
+    for (uint8_t i = 1; i < inkhud->userApplets.size(); i++) {
+        uint8_t newAppletIndex = 0;
+        if (i > appletIndex)
+            newAppletIndex = inkhud->userApplets.size() + appletIndex - i;
+        else
+            newAppletIndex = (appletIndex - i);
+        Applet *a = inkhud->userApplets.at(newAppletIndex);
+
+        // Looking for an applet which is active (enabled by user), but currently in background
+        if (a->isActive() && !a->isForeground()) {
+            prevValidApplet = a;
+            settings->userTiles.displayedUserApplet[settings->userTiles.focused] =
+                newAppletIndex; // Remember this setting between boots!
+            break;
+        }
+    }
+
+    // Confirm that we found another applet
+    if (!prevValidApplet)
+        return;
+
+    // Hide old applet, show new applet
+    t->getAssignedApplet()->sendToBackground();
+    t->assignApplet(prevValidApplet);
+    prevValidApplet->bringToForeground();
+    inkhud->forceUpdate(EInk::UpdateTypes::FAST); // bringToForeground already requested, but we're manually forcing FAST
+}
+
 // Rotate the display image by 90 degrees
 void InkHUD::WindowManager::rotate()
 {
@@ -338,6 +433,8 @@ void InkHUD::WindowManager::createSystemApplets()
    addSystemApplet("Logo", new LogoApplet, new Tile);
    addSystemApplet("Pairing", new PairingApplet, new Tile);
    addSystemApplet("Tips", new TipsApplet, new Tile);
+    if (settings->joystick.enabled)
+        addSystemApplet("AlignStick", new AlignStickApplet, new Tile);

    addSystemApplet("Menu", new MenuApplet, nullptr);

@@ -360,6 +457,8 @@ void InkHUD::WindowManager::placeSystemTiles()
    inkhud->getSystemApplet("Logo")->getTile()->setRegion(0, 0, inkhud->width(), inkhud->height());
    inkhud->getSystemApplet("Pairing")->getTile()->setRegion(0, 0, inkhud->width(), inkhud->height());
    inkhud->getSystemApplet("Tips")->getTile()->setRegion(0, 0, inkhud->width(), inkhud->height());
+    if (settings->joystick.enabled)
+        inkhud->getSystemApplet("AlignStick")->getTile()->setRegion(0, 0, inkhud->width(), inkhud->height());

    inkhud->getSystemApplet("Notification")->getTile()->setRegion(0, 0, inkhud->width(), 20);

--- a/src/graphics/niche/InkHUD/WindowManager.h
+++ b/src/graphics/niche/InkHUD/WindowManager.h
@@ -28,8 +28,11 @@ class WindowManager
    // - call these to make stuff change

    void nextTile();
+    void prevTile();
    void openMenu();
+    void openAlignStick();
    void nextApplet();
+    void prevApplet();
    void rotate();
    void toggleBatteryIcon();

--- a/src/graphics/niche/Inputs/TwoButtonExtended.cpp
+++ b/src/graphics/niche/Inputs/TwoButtonExtended.cpp
@@ -0,0 +1,523 @@
+#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
+
+#include "./TwoButtonExtended.h"
+
+#include "NodeDB.h" // For the helper function TwoButtonExtended::getUserButtonPin
+#include "PowerFSM.h"
+#include "sleep.h"
+
+using namespace NicheGraphics::Inputs;
+
+TwoButtonExtended::TwoButtonExtended() : concurrency::OSThread("TwoButtonExtended")
+{
+    // Don't start polling buttons for release immediately
+    // Assume they are in a "released" state at boot
+    OSThread::disable();
+
+#ifdef ARCH_ESP32
+    // Register callbacks for before and after lightsleep
+    lsObserver.observe(&notifyLightSleep);
+    lsEndObserver.observe(&notifyLightSleepEnd);
+#endif
+
+    // Explicitly initialize these, just to keep cppcheck quiet..
+    buttons[0] = Button();
+    buttons[1] = Button();
+    joystick[Direction::UP] = SimpleButton();
+    joystick[Direction::DOWN] = SimpleButton();
+    joystick[Direction::LEFT] = SimpleButton();
+    joystick[Direction::RIGHT] = SimpleButton();
+}
+
+// Get access to (or create) the singleton instance of this class
+// Accessible inside the ISRs, even though we maybe shouldn't
+TwoButtonExtended *TwoButtonExtended::getInstance()
+{
+    // Instantiate the class the first time this method is called
+    static TwoButtonExtended *const singletonInstance = new TwoButtonExtended;
+
+    return singletonInstance;
+}
+
+// Begin receiving button input
+// We probably need to do this after sleep, as well as at boot
+void TwoButtonExtended::start()
+{
+    if (buttons[0].pin != 0xFF)
+        attachInterrupt(buttons[0].pin, TwoButtonExtended::isrPrimary, buttons[0].activeLogic == LOW ? FALLING : RISING);
+
+    if (buttons[1].pin != 0xFF)
+        attachInterrupt(buttons[1].pin, TwoButtonExtended::isrSecondary, buttons[1].activeLogic == LOW ? FALLING : RISING);
+
+    if (joystick[Direction::UP].pin != 0xFF)
+        attachInterrupt(joystick[Direction::UP].pin, TwoButtonExtended::isrJoystickUp,
+                        joystickActiveLogic == LOW ? FALLING : RISING);
+
+    if (joystick[Direction::DOWN].pin != 0xFF)
+        attachInterrupt(joystick[Direction::DOWN].pin, TwoButtonExtended::isrJoystickDown,
+                        joystickActiveLogic == LOW ? FALLING : RISING);
+
+    if (joystick[Direction::LEFT].pin != 0xFF)
+        attachInterrupt(joystick[Direction::LEFT].pin, TwoButtonExtended::isrJoystickLeft,
+                        joystickActiveLogic == LOW ? FALLING : RISING);
+
+    if (joystick[Direction::RIGHT].pin != 0xFF)
+        attachInterrupt(joystick[Direction::RIGHT].pin, TwoButtonExtended::isrJoystickRight,
+                        joystickActiveLogic == LOW ? FALLING : RISING);
+}
+
+// Stop receiving button input, and run custom sleep code
+// Called before device sleeps. This might be power-off, or just ESP32 light sleep
+// Some devices will want to attach interrupts here, for the user button to wake from sleep
+void TwoButtonExtended::stop()
+{
+    if (buttons[0].pin != 0xFF)
+        detachInterrupt(buttons[0].pin);
+
+    if (buttons[1].pin != 0xFF)
+        detachInterrupt(buttons[1].pin);
+
+    if (joystick[Direction::UP].pin != 0xFF)
+        detachInterrupt(joystick[Direction::UP].pin);
+
+    if (joystick[Direction::DOWN].pin != 0xFF)
+        detachInterrupt(joystick[Direction::DOWN].pin);
+
+    if (joystick[Direction::LEFT].pin != 0xFF)
+        detachInterrupt(joystick[Direction::LEFT].pin);
+
+    if (joystick[Direction::RIGHT].pin != 0xFF)
+        detachInterrupt(joystick[Direction::RIGHT].pin);
+}
+
+// Attempt to resolve a GPIO pin for the user button, honoring userPrefs.jsonc and device settings
+// This helper method isn't used by the TwoButtonExtended class itself, it could be moved elsewhere.
+// Intention is to pass this value to TwoButtonExtended::setWiring in the setupNicheGraphics method.
+uint8_t TwoButtonExtended::getUserButtonPin()
+{
+    uint8_t pin = 0xFF; // Unset
+
+    // Use default pin for variant, if no better source
+#ifdef BUTTON_PIN
+    pin = BUTTON_PIN;
+#endif
+
+    // From userPrefs.jsonc, if set
+#ifdef USERPREFS_BUTTON_PIN
+    pin = USERPREFS_BUTTON_PIN;
+#endif
+
+    // From user's override in device settings, if set
+    if (config.device.button_gpio)
+        pin = config.device.button_gpio;
+
+    return pin;
+}
+
+// Configures the wiring and logic of either button
+// Called when outlining your NicheGraphics implementation, in variant/nicheGraphics.cpp
+void TwoButtonExtended::setWiring(uint8_t whichButton, uint8_t pin, bool internalPullup)
+{
+    // Prevent the same GPIO being assigned to multiple buttons
+    // Allows an edge case when the user remaps hardware buttons using device settings, due to a broken user button
+    for (uint8_t i = 0; i < whichButton; i++) {
+        if (buttons[i].pin == pin) {
+            LOG_WARN("Attempted reuse of GPIO %d. Ignoring assignment whichButton=%d", pin, whichButton);
+            return;
+        }
+    }
+
+    assert(whichButton < 2);
+    buttons[whichButton].pin = pin;
+    buttons[whichButton].activeLogic = LOW;
+
+    pinMode(buttons[whichButton].pin, internalPullup ? INPUT_PULLUP : INPUT);
+}
+
+// Configures the wiring and logic of the joystick buttons
+// Called when outlining your NicheGraphics implementation, in variant/nicheGraphics.cpp
+void TwoButtonExtended::setJoystickWiring(uint8_t uPin, uint8_t dPin, uint8_t lPin, uint8_t rPin, bool internalPullup)
+{
+    if (joystick[Direction::UP].pin == uPin || joystick[Direction::DOWN].pin == dPin || joystick[Direction::LEFT].pin == lPin ||
+        joystick[Direction::RIGHT].pin == rPin) {
+        LOG_WARN("Attempted reuse of Joystick GPIO. Ignoring assignment");
+        return;
+    }
+
+    joystick[Direction::UP].pin = uPin;
+    joystick[Direction::DOWN].pin = dPin;
+    joystick[Direction::LEFT].pin = lPin;
+    joystick[Direction::RIGHT].pin = rPin;
+    joystickActiveLogic = LOW;
+
+    pinMode(joystick[Direction::UP].pin, internalPullup ? INPUT_PULLUP : INPUT);
+    pinMode(joystick[Direction::DOWN].pin, internalPullup ? INPUT_PULLUP : INPUT);
+    pinMode(joystick[Direction::LEFT].pin, internalPullup ? INPUT_PULLUP : INPUT);
+    pinMode(joystick[Direction::RIGHT].pin, internalPullup ? INPUT_PULLUP : INPUT);
+}
+
+void TwoButtonExtended::setTiming(uint8_t whichButton, uint32_t debounceMs, uint32_t longpressMs)
+{
+    assert(whichButton < 2);
+    buttons[whichButton].debounceLength = debounceMs;
+    buttons[whichButton].longpressLength = longpressMs;
+}
+
+void TwoButtonExtended::setJoystickDebounce(uint32_t debounceMs)
+{
+    joystickDebounceLength = debounceMs;
+}
+
+// Set what should happen when a button becomes pressed
+// Use this to implement a "while held" behavior
+void TwoButtonExtended::setHandlerDown(uint8_t whichButton, Callback onDown)
+{
+    assert(whichButton < 2);
+    buttons[whichButton].onDown = onDown;
+}
+
+// Set what should happen when a button becomes unpressed
+// Use this to implement a "While held" behavior
+void TwoButtonExtended::setHandlerUp(uint8_t whichButton, Callback onUp)
+{
+    assert(whichButton < 2);
+    buttons[whichButton].onUp = onUp;
+}
+
+// Set what should happen when a "short press" event has occurred
+void TwoButtonExtended::setHandlerShortPress(uint8_t whichButton, Callback onPress)
+{
+    assert(whichButton < 2);
+    buttons[whichButton].onPress = onPress;
+}
+
+// Set what should happen when a "long press" event has fired
+// Note: this will occur while the button is still held
+void TwoButtonExtended::setHandlerLongPress(uint8_t whichButton, Callback onLongPress)
+{
+    assert(whichButton < 2);
+    buttons[whichButton].onLongPress = onLongPress;
+}
+
+// Set what should happen when a joystick button becomes pressed
+// Use this to implement a "while held" behavior
+void TwoButtonExtended::setJoystickDownHandlers(Callback uDown, Callback dDown, Callback lDown, Callback rDown)
+{
+    joystick[Direction::UP].onDown = uDown;
+    joystick[Direction::DOWN].onDown = dDown;
+    joystick[Direction::LEFT].onDown = lDown;
+    joystick[Direction::RIGHT].onDown = rDown;
+}
+
+// Set what should happen when a joystick button becomes unpressed
+// Use this to implement a "while held" behavior
+void TwoButtonExtended::setJoystickUpHandlers(Callback uUp, Callback dUp, Callback lUp, Callback rUp)
+{
+    joystick[Direction::UP].onUp = uUp;
+    joystick[Direction::DOWN].onUp = dUp;
+    joystick[Direction::LEFT].onUp = lUp;
+    joystick[Direction::RIGHT].onUp = rUp;
+}
+
+// Set what should happen when a "press" event has fired
+// Note: this will occur while the joystick button is still held
+void TwoButtonExtended::setJoystickPressHandlers(Callback uPress, Callback dPress, Callback lPress, Callback rPress)
+{
+    joystick[Direction::UP].onPress = uPress;
+    joystick[Direction::DOWN].onPress = dPress;
+    joystick[Direction::LEFT].onPress = lPress;
+    joystick[Direction::RIGHT].onPress = rPress;
+}
+
+// Handle the start of a press to the primary button
+// Wakes our button thread
+void TwoButtonExtended::isrPrimary()
+{
+    static volatile bool isrRunning = false;
+
+    if (!isrRunning) {
+        isrRunning = true;
+        TwoButtonExtended *b = TwoButtonExtended::getInstance();
+        if (b->buttons[0].state == State::REST) {
+            b->buttons[0].state = State::IRQ;
+            b->buttons[0].irqAtMillis = millis();
+            b->startThread();
+        }
+        isrRunning = false;
+    }
+}
+
+// Handle the start of a press to the secondary button
+// Wakes our button thread
+void TwoButtonExtended::isrSecondary()
+{
+    static volatile bool isrRunning = false;
+
+    if (!isrRunning) {
+        isrRunning = true;
+        TwoButtonExtended *b = TwoButtonExtended::getInstance();
+        if (b->buttons[1].state == State::REST) {
+            b->buttons[1].state = State::IRQ;
+            b->buttons[1].irqAtMillis = millis();
+            b->startThread();
+        }
+        isrRunning = false;
+    }
+}
+
+// Handle the start of a press to the joystick buttons
+// Also wakes our button thread
+void TwoButtonExtended::isrJoystickUp()
+{
+    static volatile bool isrRunning = false;
+
+    if (!isrRunning) {
+        isrRunning = true;
+        TwoButtonExtended *b = TwoButtonExtended::getInstance();
+        if (b->joystick[Direction::UP].state == State::REST) {
+            b->joystick[Direction::UP].state = State::IRQ;
+            b->joystick[Direction::UP].irqAtMillis = millis();
+            b->startThread();
+        }
+        isrRunning = false;
+    }
+}
+
+void TwoButtonExtended::isrJoystickDown()
+{
+    static volatile bool isrRunning = false;
+
+    if (!isrRunning) {
+        isrRunning = true;
+        TwoButtonExtended *b = TwoButtonExtended::getInstance();
+        if (b->joystick[Direction::DOWN].state == State::REST) {
+            b->joystick[Direction::DOWN].state = State::IRQ;
+            b->joystick[Direction::DOWN].irqAtMillis = millis();
+            b->startThread();
+        }
+        isrRunning = false;
+    }
+}
+
+void TwoButtonExtended::isrJoystickLeft()
+{
+    static volatile bool isrRunning = false;
+
+    if (!isrRunning) {
+        isrRunning = true;
+        TwoButtonExtended *b = TwoButtonExtended::getInstance();
+        if (b->joystick[Direction::LEFT].state == State::REST) {
+            b->joystick[Direction::LEFT].state = State::IRQ;
+            b->joystick[Direction::LEFT].irqAtMillis = millis();
+            b->startThread();
+        }
+        isrRunning = false;
+    }
+}
+
+void TwoButtonExtended::isrJoystickRight()
+{
+    static volatile bool isrRunning = false;
+
+    if (!isrRunning) {
+        isrRunning = true;
+        TwoButtonExtended *b = TwoButtonExtended::getInstance();
+        if (b->joystick[Direction::RIGHT].state == State::REST) {
+            b->joystick[Direction::RIGHT].state = State::IRQ;
+            b->joystick[Direction::RIGHT].irqAtMillis = millis();
+            b->startThread();
+        }
+        isrRunning = false;
+    }
+}
+
+// Concise method to start our button thread
+// Follows an ISR, listening for button release
+void TwoButtonExtended::startThread()
+{
+    if (!OSThread::enabled) {
+        OSThread::setInterval(10);
+        OSThread::enabled = true;
+    }
+}
+
+// Concise method to stop our button thread
+// Called when we no longer need to poll for button release
+void TwoButtonExtended::stopThread()
+{
+    if (OSThread::enabled) {
+        OSThread::disable();
+    }
+
+    // Reset both buttons manually
+    // Just in case an IRQ fires during the process of resetting the system
+    // Can occur with super rapid presses?
+    buttons[0].state = REST;
+    buttons[1].state = REST;
+    joystick[Direction::UP].state = REST;
+    joystick[Direction::DOWN].state = REST;
+    joystick[Direction::LEFT].state = REST;
+    joystick[Direction::RIGHT].state = REST;
+}
+
+// Our button thread
+// Started by an IRQ, on either button
+// Polls for button releases
+// Stops when both buttons released
+int32_t TwoButtonExtended::runOnce()
+{
+    constexpr uint8_t BUTTON_COUNT = sizeof(buttons) / sizeof(Button);
+    constexpr uint8_t JOYSTICK_COUNT = sizeof(joystick) / sizeof(SimpleButton);
+
+    // Allow either button to request that our thread should continue polling
+    bool awaitingRelease = false;
+
+    // Check both primary and secondary buttons
+    for (uint8_t i = 0; i < BUTTON_COUNT; i++) {
+        switch (buttons[i].state) {
+        // No action: button has not been pressed
+        case REST:
+            break;
+
+        // New press detected by interrupt
+        case IRQ:
+            powerFSM.trigger(EVENT_PRESS);             // Tell PowerFSM that press occurred (resets sleep timer)
+            buttons[i].onDown();                       // Run callback: press has begun (possible hold behavior)
+            buttons[i].state = State::POLLING_UNFIRED; // Mark that button-down has been handled
+            awaitingRelease = true;                    // Mark that polling-for-release should continue
+            break;
+
+        // An existing press continues
+        // Not held long enough to register as longpress
+        case POLLING_UNFIRED: {
+            uint32_t length = millis() - buttons[i].irqAtMillis;
+
+            // If button released since last thread tick,
+            if (digitalRead(buttons[i].pin) != buttons[i].activeLogic) {
+                buttons[i].onUp();              // Run callback: press has ended (possible release of a hold)
+                buttons[i].state = State::REST; // Mark that the button has reset
+                if (length > buttons[i].debounceLength && length < buttons[i].longpressLength) // If too short for longpress,
+                    buttons[i].onPress();                                                      // Run callback: press
+            }
+            // If button not yet released
+            else {
+                awaitingRelease = true; // Mark that polling-for-release should continue
+                if (length >= buttons[i].longpressLength) {
+                    // Run callback: long press (once)
+                    // Then continue waiting for release, to rearm
+                    buttons[i].state = State::POLLING_FIRED;
+                    buttons[i].onLongPress();
+                }
+            }
+            break;
+        }
+
+        // Button still held, but duration long enough that longpress event already fired
+        // Just waiting for release
+        case POLLING_FIRED:
+            // Release detected
+            if (digitalRead(buttons[i].pin) != buttons[i].activeLogic) {
+                buttons[i].state = State::REST;
+                buttons[i].onUp(); // Callback: release of hold (in this case: *after* longpress has fired)
+            }
+            // Not yet released, keep polling
+            else
+                awaitingRelease = true;
+            break;
+        }
+    }
+
+    // Check all the joystick directions
+    for (uint8_t i = 0; i < JOYSTICK_COUNT; i++) {
+        switch (joystick[i].state) {
+        // No action: button has not been pressed
+        case REST:
+            break;
+
+        // New press detected by interrupt
+        case IRQ:
+            powerFSM.trigger(EVENT_PRESS);              // Tell PowerFSM that press occurred (resets sleep timer)
+            joystick[i].onDown();                       // Run callback: press has begun (possible hold behavior)
+            joystick[i].state = State::POLLING_UNFIRED; // Mark that button-down has been handled
+            awaitingRelease = true;                     // Mark that polling-for-release should continue
+            break;
+
+        // An existing press continues
+        // Not held long enough to register as press
+        case POLLING_UNFIRED: {
+            uint32_t length = millis() - joystick[i].irqAtMillis;
+
+            // If button released since last thread tick,
+            if (digitalRead(joystick[i].pin) != joystickActiveLogic) {
+                joystick[i].onUp();              // Run callback: press has ended (possible release of a hold)
+                joystick[i].state = State::REST; // Mark that the button has reset
+            }
+            // If button not yet released
+            else {
+                awaitingRelease = true; // Mark that polling-for-release should continue
+                if (length >= joystickDebounceLength) {
+                    // Run callback: long press (once)
+                    // Then continue waiting for release, to rearm
+                    joystick[i].state = State::POLLING_FIRED;
+                    joystick[i].onPress();
+                }
+            }
+            break;
+        }
+
+        // Button still held after press
+        // Just waiting for release
+        case POLLING_FIRED:
+            // Release detected
+            if (digitalRead(joystick[i].pin) != joystickActiveLogic) {
+                joystick[i].state = State::REST;
+                joystick[i].onUp(); // Callback: release of hold
+            }
+            // Not yet released, keep polling
+            else
+                awaitingRelease = true;
+            break;
+        }
+    }
+
+    // If all buttons are now released
+    // we don't need to waste cpu resources polling
+    // IRQ will restart this thread when we next need it
+    if (!awaitingRelease)
+        stopThread();
+
+    // Run this method again, or don't..
+    // Use whatever behavior was previously set by stopThread() or startThread()
+    return OSThread::interval;
+}
+
+#ifdef ARCH_ESP32
+
+// Detach our class' interrupts before lightsleep
+// Allows sleep.cpp to configure its own interrupts, which wake the device on user-button press
+int TwoButtonExtended::beforeLightSleep(void *unused)
+{
+    stop();
+    return 0; // Indicates success
+}
+
+// Reconfigure our interrupts
+// Our class' interrupts were disconnected during sleep, to allow the user button to wake the device from sleep
+int TwoButtonExtended::afterLightSleep(esp_sleep_wakeup_cause_t cause)
+{
+    start();
+
+    // Manually trigger the button-down ISR
+    // - during light sleep, our ISR is disabled
+    // - if light sleep ends by button press, pretend our own ISR caught it
+    // - need to manually confirm by reading pin ourselves, to avoid occasional false positives
+    //   (false positive only when using internal pullup resistors?)
+    if (cause == ESP_SLEEP_WAKEUP_GPIO && digitalRead(buttons[0].pin) == buttons[0].activeLogic)
+        isrPrimary();
+
+    return 0; // Indicates success
+}
+
+#endif
+
+#endif
--- a/src/graphics/niche/Inputs/TwoButtonExtended.h
+++ b/src/graphics/niche/Inputs/TwoButtonExtended.h
@@ -0,0 +1,136 @@
+#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
+
+/*
+
+Re-usable NicheGraphics input source
+
+Short and Long press for up to two buttons
+Interrupt driven
+
+*/
+
+/*
+
+This expansion adds support for four more buttons
+These buttons are single-action only, no long press
+Interrupt driven
+
+*/
+
+#pragma once
+
+#include "configuration.h"
+
+#include "assert.h"
+#include "functional"
+
+#ifdef ARCH_ESP32
+#include "esp_sleep.h" // For light-sleep handling
+#endif
+
+#include "Observer.h"
+
+namespace NicheGraphics::Inputs
+{
+
+class TwoButtonExtended : protected concurrency::OSThread
+{
+  public:
+    typedef std::function<void()> Callback;
+
+    static uint8_t getUserButtonPin(); // Resolve the GPIO, considering the various possible source of definition
+
+    static TwoButtonExtended *getInstance(); // Create or get the singleton instance
+    void start();                            // Start handling button input
+    void stop();                             // Stop handling button input (disconnect ISRs for sleep)
+    void setWiring(uint8_t whichButton, uint8_t pin, bool internalPullup = false);
+    void setJoystickWiring(uint8_t uPin, uint8_t dPin, uint8_t lPin, uint8_t rPin, bool internalPullup = false);
+    void setTiming(uint8_t whichButton, uint32_t debounceMs, uint32_t longpressMs);
+    void setJoystickDebounce(uint32_t debounceMs);
+    void setHandlerDown(uint8_t whichButton, Callback onDown);
+    void setHandlerUp(uint8_t whichButton, Callback onUp);
+    void setHandlerShortPress(uint8_t whichButton, Callback onShortPress);
+    void setHandlerLongPress(uint8_t whichButton, Callback onLongPress);
+    void setJoystickDownHandlers(Callback uDown, Callback dDown, Callback ldown, Callback rDown);
+    void setJoystickUpHandlers(Callback uUp, Callback dUp, Callback lUp, Callback rUp);
+    void setJoystickPressHandlers(Callback uPress, Callback dPress, Callback lPress, Callback rPress);
+
+    // Disconnect and reconnect interrupts for light sleep
+#ifdef ARCH_ESP32
+    int beforeLightSleep(void *unused);
+    int afterLightSleep(esp_sleep_wakeup_cause_t cause);
+#endif
+
+  private:
+    // Internal state of a specific button
+    enum State {
+        REST,            // Up, no activity
+        IRQ,             // Down detected, not yet handled
+        POLLING_UNFIRED, // Down handled, polling for release
+        POLLING_FIRED,   // Longpress fired, button still held
+    };
+
+    // Joystick Directions
+    enum Direction { UP = 0, DOWN, LEFT, RIGHT };
+
+    // Data used for direction (single-action) buttons
+    class SimpleButton
+    {
+      public:
+        // Per-button config
+        uint8_t pin = 0xFF;                 // 0xFF: unset
+        volatile State state = State::REST; // Internal state
+        volatile uint32_t irqAtMillis;      // millis() when button went down
+
+        // Per-button event callbacks
+        static void noop(){};
+        std::function<void()> onDown = noop;
+        std::function<void()> onUp = noop;
+        std::function<void()> onPress = noop;
+    };
+
+    // Data used for double-action buttons
+    class Button : public SimpleButton
+    {
+      public:
+        // Per-button extended config
+        bool activeLogic = LOW;         // Active LOW by default.
+        uint32_t debounceLength = 50;   // Minimum length for shortpress in ms
+        uint32_t longpressLength = 500; // Time until longpress in ms
+
+        // Per-button event callbacks
+        std::function<void()> onLongPress = noop;
+    };
+
+#ifdef ARCH_ESP32
+    // Get notified when lightsleep begins and ends
+    CallbackObserver<TwoButtonExtended, void *> lsObserver =
+        CallbackObserver<TwoButtonExtended, void *>(this, &TwoButtonExtended::beforeLightSleep);
+    CallbackObserver<TwoButtonExtended, esp_sleep_wakeup_cause_t> lsEndObserver =
+        CallbackObserver<TwoButtonExtended, esp_sleep_wakeup_cause_t>(this, &TwoButtonExtended::afterLightSleep);
+#endif
+
+    int32_t runOnce() override; // Timer method. Polls for button release
+
+    void startThread(); // Start polling for release
+    void stopThread();  // Stop polling for release
+
+    static void isrPrimary();   // User Button ISR
+    static void isrSecondary(); // optional aux button or joystick center
+    static void isrJoystickUp();
+    static void isrJoystickDown();
+    static void isrJoystickLeft();
+    static void isrJoystickRight();
+
+    TwoButtonExtended(); // Constructor made private: force use of Button::instance()
+
+    // Info about both buttons
+    Button buttons[2];
+    bool joystickActiveLogic = LOW;       // Active LOW by default
+    uint32_t joystickDebounceLength = 50; // time until press in ms
+    SimpleButton joystick[4];
+};
+
+}; // namespace NicheGraphics::Inputs
+
+#endif
--- a/src/input/InputBroker.h
+++ b/src/input/InputBroker.h
@@ -53,6 +53,7 @@ typedef struct _InputEvent {
 class InputPollable
 {
  public:
+    virtual ~InputPollable() = default;
    virtual void pollOnce() = 0;
 };

--- a/src/input/RotaryEncoderImpl.cpp
+++ b/src/input/RotaryEncoderImpl.cpp
@@ -3,6 +3,9 @@
 #include "RotaryEncoderImpl.h"
 #include "InputBroker.h"
 #include "RotaryEncoder.h"
+#ifdef ARCH_ESP32
+#include "sleep.h"
+#endif

 #define ORIGIN_NAME "RotaryEncoder"

@@ -11,6 +14,20 @@ RotaryEncoderImpl *rotaryEncoderImpl;
 RotaryEncoderImpl::RotaryEncoderImpl()
 {
    rotary = nullptr;
+#ifdef ARCH_ESP32
+    isFirstInit = true;
+#endif
+}
+
+RotaryEncoderImpl::~RotaryEncoderImpl()
+{
+    LOG_DEBUG("RotaryEncoderImpl destructor");
+    detachRotaryEncoderInterrupts();
+
+    if (rotary != nullptr) {
+        delete rotary;
+        rotary = nullptr;
+    }
 }

 bool RotaryEncoderImpl::init()
@@ -25,15 +42,22 @@ bool RotaryEncoderImpl::init()
    eventCcw = static_cast<input_broker_event>(moduleConfig.canned_message.inputbroker_event_ccw);
    eventPressed = static_cast<input_broker_event>(moduleConfig.canned_message.inputbroker_event_press);

+    if (rotary == nullptr) {
        rotary = new RotaryEncoder(moduleConfig.canned_message.inputbroker_pin_a, moduleConfig.canned_message.inputbroker_pin_b,
                                   moduleConfig.canned_message.inputbroker_pin_press);
-    rotary->resetButton();
+    }

-    interruptInstance = this;
-    auto interruptHandler = []() { inputBroker->requestPollSoon(interruptInstance); };
-    attachInterrupt(moduleConfig.canned_message.inputbroker_pin_a, interruptHandler, CHANGE);
-    attachInterrupt(moduleConfig.canned_message.inputbroker_pin_b, interruptHandler, CHANGE);
-    attachInterrupt(moduleConfig.canned_message.inputbroker_pin_press, interruptHandler, CHANGE);
+    attachRotaryEncoderInterrupts();
+
+#ifdef ARCH_ESP32
+    // Register callbacks for before and after lightsleep
+    // Used to detach and reattach interrupts
+    if (isFirstInit) {
+        lsObserver.observe(&notifyLightSleep);
+        lsEndObserver.observe(&notifyLightSleepEnd);
+        isFirstInit = false;
+    }
+#endif

    LOG_INFO("RotaryEncoder initialized pins(%d, %d, %d), events(%d, %d, %d)", moduleConfig.canned_message.inputbroker_pin_a,
             moduleConfig.canned_message.inputbroker_pin_b, moduleConfig.canned_message.inputbroker_pin_press, eventCw, eventCcw,
@@ -71,6 +95,50 @@ void RotaryEncoderImpl::pollOnce()
    }
 }

+void RotaryEncoderImpl::detachRotaryEncoderInterrupts()
+{
+    LOG_DEBUG("RotaryEncoderImpl detach button interrupts");
+    if (interruptInstance == this) {
+        detachInterrupt(moduleConfig.canned_message.inputbroker_pin_a);
+        detachInterrupt(moduleConfig.canned_message.inputbroker_pin_b);
+        detachInterrupt(moduleConfig.canned_message.inputbroker_pin_press);
+        interruptInstance = nullptr;
+    } else {
+        LOG_WARN("RotaryEncoderImpl: interrupts already detached");
+    }
+}
+
+void RotaryEncoderImpl::attachRotaryEncoderInterrupts()
+{
+    LOG_DEBUG("RotaryEncoderImpl attach button interrupts");
+    if (rotary != nullptr && interruptInstance == nullptr) {
+        rotary->resetButton();
+
+        interruptInstance = this;
+        auto interruptHandler = []() { inputBroker->requestPollSoon(interruptInstance); };
+        attachInterrupt(moduleConfig.canned_message.inputbroker_pin_a, interruptHandler, CHANGE);
+        attachInterrupt(moduleConfig.canned_message.inputbroker_pin_b, interruptHandler, CHANGE);
+        attachInterrupt(moduleConfig.canned_message.inputbroker_pin_press, interruptHandler, CHANGE);
+    } else {
+        LOG_WARN("RotaryEncoderImpl: interrupts already attached");
+    }
+}
+
+#ifdef ARCH_ESP32
+
+int RotaryEncoderImpl::beforeLightSleep(void *unused)
+{
+    detachRotaryEncoderInterrupts();
+    return 0; // Indicates success;
+}
+
+int RotaryEncoderImpl::afterLightSleep(esp_sleep_wakeup_cause_t cause)
+{
+    attachRotaryEncoderInterrupts();
+    return 0; // Indicates success;
+}
+#endif
+
 RotaryEncoderImpl *RotaryEncoderImpl::interruptInstance;

 #endif
--- a/src/input/RotaryEncoderImpl.h
+++ b/src/input/RotaryEncoderImpl.h
@@ -8,12 +8,18 @@

 class RotaryEncoder;

-class RotaryEncoderImpl : public InputPollable
+class RotaryEncoderImpl final : public InputPollable
 {
  public:
    RotaryEncoderImpl();
-    bool init(void);
+    ~RotaryEncoderImpl() override;
+    bool init();
    virtual void pollOnce() override;
+    // Disconnect and reconnect interrupts for light sleep
+#ifdef ARCH_ESP32
+    int beforeLightSleep(void *unused);
+    int afterLightSleep(esp_sleep_wakeup_cause_t cause);
+#endif

  protected:
    static RotaryEncoderImpl *interruptInstance;
@@ -23,6 +29,21 @@ class RotaryEncoderImpl : public InputPollable
    input_broker_event eventPressed = INPUT_BROKER_NONE;

    RotaryEncoder *rotary;
+
+  private:
+#ifdef ARCH_ESP32
+    bool isFirstInit;
+#endif
+    void detachRotaryEncoderInterrupts();
+    void attachRotaryEncoderInterrupts();
+
+#ifdef ARCH_ESP32
+    // Get notified when lightsleep begins and ends
+    CallbackObserver<RotaryEncoderImpl, void *> lsObserver =
+        CallbackObserver<RotaryEncoderImpl, void *>(this, &RotaryEncoderImpl::beforeLightSleep);
+    CallbackObserver<RotaryEncoderImpl, esp_sleep_wakeup_cause_t> lsEndObserver =
+        CallbackObserver<RotaryEncoderImpl, esp_sleep_wakeup_cause_t>(this, &RotaryEncoderImpl::afterLightSleep);
+#endif
 };

 extern RotaryEncoderImpl *rotaryEncoderImpl;
--- a/src/main.cpp
+++ b/src/main.cpp
@@ -428,10 +428,17 @@ void setup()
 #endif

 #if ARCH_PORTDUINO
+    RTCQuality ourQuality = RTCQualityDevice;
+
+    std::string timeCommandResult = exec("timedatectl status | grep synchronized | grep yes -c");
+    if (timeCommandResult[0] == '1') {
+        ourQuality = RTCQualityNTP;
+    }
+
    struct timeval tv;
    tv.tv_sec = time(NULL);
    tv.tv_usec = 0;
-    perhapsSetRTC(RTCQualityDevice, &tv);
+    perhapsSetRTC(ourQuality, &tv);
 #endif

    powerMonInit();
@@ -440,9 +447,11 @@ void setup()
    LOG_INFO("\n\n//\\ E S H T /\\ S T / C\n");

 #if defined(ARCH_ESP32) && defined(BOARD_HAS_PSRAM)
+#ifndef SENSECAP_INDICATOR
    // use PSRAM for malloc calls > 256 bytes
    heap_caps_malloc_extmem_enable(256);
 #endif
+#endif

 #if defined(DEBUG_MUTE) && defined(DEBUG_PORT)
    DEBUG_PORT.printf("\r\n\r\n//\\ E S H T /\\ S T / C\r\n");
--- a/src/mesh/Channels.h
+++ b/src/mesh/Channels.h
@@ -96,6 +96,8 @@ class Channels

    bool setDefaultPresetCryptoForHash(ChannelHash channelHash);

+    int16_t getHash(ChannelIndex i) { return hashes[i]; }
+
  private:
    /** Given a channel index, change to use the crypto key specified by that index
     *
@@ -113,8 +115,6 @@ class Channels
     */
    int16_t generateHash(ChannelIndex channelNum);

-    int16_t getHash(ChannelIndex i) { return hashes[i]; }
-
    /**
     * Validate a channel, fixing any errors as needed
     */
--- a/src/mesh/FloodingRouter.cpp
+++ b/src/mesh/FloodingRouter.cpp
@@ -124,6 +124,10 @@ void FloodingRouter::perhapsCancelDupe(const meshtastic_MeshPacket *p)
    if (config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER_LATE && iface) {
        iface->clampToLateRebroadcastWindow(getFrom(p), p->id);
    }
+    if (config.device.role == meshtastic_Config_DeviceConfig_Role_CLIENT_BASE && iface && nodeDB &&
+        nodeDB->isFromOrToFavoritedNode(*p)) {
+        iface->clampToLateRebroadcastWindow(getFrom(p), p->id);
+    }
 }

 bool FloodingRouter::isRebroadcaster()
--- a/src/mesh/MeshService.cpp
+++ b/src/mesh/MeshService.cpp
@@ -276,6 +276,10 @@ bool MeshService::trySendPosition(NodeNum dest, bool wantReplies)
    if (nodeDB->hasValidPosition(node)) {
 #if HAS_GPS && !MESHTASTIC_EXCLUDE_GPS
        if (positionModule) {
+            if (!config.position.fixed_position && !nodeDB->hasLocalPositionSinceBoot()) {
+                LOG_DEBUG("Skip position ping; no fresh position since boot");
+                return false;
+            }
            LOG_INFO("Send position ping to 0x%x, wantReplies=%d, channel=%d", dest, wantReplies, node->channel);
            positionModule->sendOurPosition(dest, wantReplies, node->channel);
            return true;
--- a/src/mesh/NodeDB.cpp
+++ b/src/mesh/NodeDB.cpp
@@ -805,11 +805,11 @@ void NodeDB::installDefaultModuleConfig()
    moduleConfig.external_notification.output_ms = 500;
    moduleConfig.external_notification.nag_timeout = 2;
 #endif
-#if defined(RAK4630) || defined(RAK11310) || defined(RAK3312) || defined(MUZI_BASE)
-    // Default to RAK led pin 2 (blue)
+#if defined(RAK4630) || defined(RAK11310) || defined(RAK3312) || defined(MUZI_BASE) || defined(ELECROW_ThinkNode_M3)
+    // Default to PIN_LED2 for external notification output (LED color depends on device variant)
    moduleConfig.external_notification.enabled = true;
    moduleConfig.external_notification.output = PIN_LED2;
-#if defined(MUZI_BASE)
+#if defined(MUZI_BASE) || defined(ELECROW_ThinkNode_M3)
    moduleConfig.external_notification.active = false;
 #else
    moduleConfig.external_notification.active = true;
@@ -1043,6 +1043,7 @@ void NodeDB::clearLocalPosition()
    node->position.altitude = 0;
    node->position.time = 0;
    setLocalPosition(meshtastic_Position_init_default);
+    localPositionUpdatedSinceBoot = false;
 }

 void NodeDB::cleanupMeshDB()
--- a/src/mesh/NodeDB.h
+++ b/src/mesh/NodeDB.h
@@ -279,9 +279,13 @@ class NodeDB
        LOG_DEBUG("Set local position: lat=%i lon=%i time=%u timestamp=%u", position.latitude_i, position.longitude_i,
                  position.time, position.timestamp);
        localPosition = position;
+        if (position.latitude_i != 0 || position.longitude_i != 0) {
+            localPositionUpdatedSinceBoot = true;
+        }
    }

    bool hasValidPosition(const meshtastic_NodeInfoLite *n);
+    bool hasLocalPositionSinceBoot() const { return localPositionUpdatedSinceBoot; }

 #if !defined(MESHTASTIC_EXCLUDE_PKI)
    bool checkLowEntropyPublicKey(const meshtastic_Config_SecurityConfig_public_key_t &keyToTest);
@@ -301,6 +305,7 @@ class NodeDB

  private:
    bool duplicateWarned = false;
+    bool localPositionUpdatedSinceBoot = false;
    uint32_t lastNodeDbSave = 0;    // when we last saved our db to flash
    uint32_t lastBackupAttempt = 0; // when we last tried a backup automatically or manually
    uint32_t lastSort = 0;          // When last sorted the nodeDB
--- a/src/mesh/RadioInterface.cpp
+++ b/src/mesh/RadioInterface.cpp
@@ -296,11 +296,6 @@ bool RadioInterface::shouldRebroadcastEarlyLikeRouter(meshtastic_MeshPacket *p)
        return true;
    }

-    // If we are a CLIENT_BASE and the packet is from or to a favorited node, we should rebroadcast early
-    if (config.device.role == meshtastic_Config_DeviceConfig_Role_CLIENT_BASE) {
-        return nodeDB->isFromOrToFavoritedNode(*p);
-    }
-
    return false;
 }

@@ -503,6 +498,11 @@ void RadioInterface::applyModemConfig()
                cr = 5;
                sf = 10;
                break;
+            case meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO:
+                bw = (myRegion->wideLora) ? 1625.0 : 500;
+                cr = 8;
+                sf = 11;
+                break;
            default: // Config_LoRaConfig_ModemPreset_LONG_FAST is default. Gracefully use this is preset is something illegal.
                bw = (myRegion->wideLora) ? 812.5 : 250;
                cr = 5;
@@ -539,13 +539,26 @@ void RadioInterface::applyModemConfig()
        }

        if ((myRegion->freqEnd - myRegion->freqStart) < bw / 1000) {
-            static const char *err_string = "Regional frequency range is smaller than bandwidth. Fall back to default preset";
-            LOG_ERROR(err_string);
+            const float regionSpanKHz = (myRegion->freqEnd - myRegion->freqStart) * 1000.0f;
+            const float requestedBwKHz = bw;
+            const bool isWideRequest = requestedBwKHz >= 499.5f; // treat as 500 kHz preset
+            const char *presetName =
+                DisplayFormatters::getModemPresetDisplayName(loraConfig.modem_preset, false, loraConfig.use_preset);
+
+            char err_string[160];
+            if (isWideRequest) {
+                snprintf(err_string, sizeof(err_string), "%s region too narrow for 500kHz preset (%s). Falling back to LongFast.",
+                         myRegion->name, presetName);
+            } else {
+                snprintf(err_string, sizeof(err_string), "%s region span %.0fkHz < requested %.0fkHz. Falling back to LongFast.",
+                         myRegion->name, regionSpanKHz, requestedBwKHz);
+            }
+            LOG_ERROR("%s", err_string);
            RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_INVALID_RADIO_SETTING);

            meshtastic_ClientNotification *cn = clientNotificationPool.allocZeroed();
            cn->level = meshtastic_LogRecord_Level_ERROR;
-            sprintf(cn->message, err_string);
+            snprintf(cn->message, sizeof(cn->message), "%s", err_string);
            service->sendClientNotification(cn);

            // Set to default modem preset
--- a/src/mesh/Router.cpp
+++ b/src/mesh/Router.cpp
@@ -526,6 +526,10 @@ DecodeState perhapsDecode(meshtastic_MeshPacket *p)
 #elif ARCH_PORTDUINO
        if (portduino_config.traceFilename != "" || portduino_config.logoutputlevel == level_trace) {
            LOG_TRACE("%s", MeshPacketSerializer::JsonSerialize(p, false).c_str());
+        } else if (portduino_config.JSONFilename != "") {
+            if (portduino_config.JSONFilter == (_meshtastic_PortNum)0 || portduino_config.JSONFilter == p->decoded.portnum) {
+                JSONFile << MeshPacketSerializer::JsonSerialize(p, false) << std::endl;
+            }
        }
 #endif
        return DecodeState::DECODE_SUCCESS;
@@ -688,7 +692,7 @@ void Router::handleReceived(meshtastic_MeshPacket *p, RxSource src)

    // Store a copy of encrypted packet for MQTT
    DEBUG_HEAP_BEFORE;
-    meshtastic_MeshPacket *p_encrypted = packetPool.allocCopy(*p);
+    p_encrypted = packetPool.allocCopy(*p);
    DEBUG_HEAP_AFTER("Router::handleReceived", p_encrypted);

    // Take those raw bytes and convert them back into a well structured protobuf we can understand
@@ -754,6 +758,7 @@ void Router::handleReceived(meshtastic_MeshPacket *p, RxSource src)
    }

    packetPool.release(p_encrypted); // Release the encrypted packet
+    p_encrypted = nullptr;
 }

 void Router::perhapsHandleReceived(meshtastic_MeshPacket *p)
--- a/src/mesh/Router.h
+++ b/src/mesh/Router.h
@@ -91,6 +91,9 @@ class Router : protected concurrency::OSThread, protected PacketHistory
        before us */
    uint32_t rxDupe = 0, txRelayCanceled = 0;

+    // pointer to the encrypted packet
+    meshtastic_MeshPacket *p_encrypted = nullptr;
+
  protected:
    friend class RoutingModule;

--- a/src/mesh/generated/meshtastic/admin.pb.cpp
+++ b/src/mesh/generated/meshtastic/admin.pb.cpp
@@ -33,3 +33,5 @@ PB_BIND(meshtastic_KeyVerificationAdmin, meshtastic_KeyVerificationAdmin, AUTO)



+
+
--- a/src/mesh/generated/meshtastic/admin.pb.h
+++ b/src/mesh/generated/meshtastic/admin.pb.h
@@ -16,6 +16,16 @@
 #endif

 /* Enum definitions */
+/* Firmware update mode for OTA updates */
+typedef enum _meshtastic_OTAMode {
+    /* Do not reboot into OTA mode */
+    meshtastic_OTAMode_NO_REBOOT_OTA = 0,
+    /* Reboot into OTA mode for BLE firmware update */
+    meshtastic_OTAMode_OTA_BLE = 1,
+    /* Reboot into OTA mode for WiFi firmware update */
+    meshtastic_OTAMode_OTA_WIFI = 2
+} meshtastic_OTAMode;
+
 /* TODO: REPLACE */
 typedef enum _meshtastic_AdminMessage_ConfigType {
    /* TODO: REPLACE */
@@ -258,10 +268,13 @@ typedef struct _meshtastic_AdminMessage {
        meshtastic_SharedContact add_contact;
        /* Initiate or respond to a key verification request */
        meshtastic_KeyVerificationAdmin key_verification;
+        /* Tell the node to reboot into OTA mode for firmware update via BLE or WiFi (ESP32 only for now) */
+        meshtastic_OTAMode reboot_ota_mode;
        /* Tell the node to factory reset config everything; all device state and configuration will be returned to factory defaults and BLE bonds will be cleared. */
        int32_t factory_reset_device;
        /* Tell the node to reboot into the OTA Firmware in this many seconds (or <0 to cancel reboot)
-     Only Implemented for ESP32 Devices. This needs to be issued to send a new main firmware via bluetooth. */
+     Only Implemented for ESP32 Devices. This needs to be issued to send a new main firmware via bluetooth.
+     Deprecated in favor of reboot_ota_mode in 2.7.17 */
        int32_t reboot_ota_seconds;
        /* This message is only supported for the simulator Portduino build.
     If received the simulator will exit successfully. */
@@ -288,6 +301,10 @@ extern "C" {
 #endif

 /* Helper constants for enums */
+#define _meshtastic_OTAMode_MIN meshtastic_OTAMode_NO_REBOOT_OTA
+#define _meshtastic_OTAMode_MAX meshtastic_OTAMode_OTA_WIFI
+#define _meshtastic_OTAMode_ARRAYSIZE ((meshtastic_OTAMode)(meshtastic_OTAMode_OTA_WIFI+1))
+
 #define _meshtastic_AdminMessage_ConfigType_MIN meshtastic_AdminMessage_ConfigType_DEVICE_CONFIG
 #define _meshtastic_AdminMessage_ConfigType_MAX meshtastic_AdminMessage_ConfigType_DEVICEUI_CONFIG
 #define _meshtastic_AdminMessage_ConfigType_ARRAYSIZE ((meshtastic_AdminMessage_ConfigType)(meshtastic_AdminMessage_ConfigType_DEVICEUI_CONFIG+1))
@@ -309,6 +326,7 @@ extern "C" {
 #define meshtastic_AdminMessage_payload_variant_backup_preferences_ENUMTYPE meshtastic_AdminMessage_BackupLocation
 #define meshtastic_AdminMessage_payload_variant_restore_preferences_ENUMTYPE meshtastic_AdminMessage_BackupLocation
 #define meshtastic_AdminMessage_payload_variant_remove_backup_preferences_ENUMTYPE meshtastic_AdminMessage_BackupLocation
+#define meshtastic_AdminMessage_payload_variant_reboot_ota_mode_ENUMTYPE meshtastic_OTAMode



@@ -396,6 +414,7 @@ extern "C" {
 #define meshtastic_AdminMessage_commit_edit_settings_tag 65
 #define meshtastic_AdminMessage_add_contact_tag  66
 #define meshtastic_AdminMessage_key_verification_tag 67
+#define meshtastic_AdminMessage_reboot_ota_mode_tag 68
 #define meshtastic_AdminMessage_factory_reset_device_tag 94
 #define meshtastic_AdminMessage_reboot_ota_seconds_tag 95
 #define meshtastic_AdminMessage_exit_simulator_tag 96
@@ -454,6 +473,7 @@ X(a, STATIC,   ONEOF,    BOOL,     (payload_variant,begin_edit_settings,begin_ed
 X(a, STATIC,   ONEOF,    BOOL,     (payload_variant,commit_edit_settings,commit_edit_settings),  65) \
 X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,add_contact,add_contact),  66) \
 X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,key_verification,key_verification),  67) \
+X(a, STATIC,   ONEOF,    UENUM,    (payload_variant,reboot_ota_mode,reboot_ota_mode),  68) \
 X(a, STATIC,   ONEOF,    INT32,    (payload_variant,factory_reset_device,factory_reset_device),  94) \
 X(a, STATIC,   ONEOF,    INT32,    (payload_variant,reboot_ota_seconds,reboot_ota_seconds),  95) \
 X(a, STATIC,   ONEOF,    BOOL,     (payload_variant,exit_simulator,exit_simulator),  96) \
--- a/src/mesh/generated/meshtastic/config.pb.h
+++ b/src/mesh/generated/meshtastic/config.pb.h
@@ -293,7 +293,8 @@ typedef enum _meshtastic_Config_LoRaConfig_RegionCode {
 typedef enum _meshtastic_Config_LoRaConfig_ModemPreset {
    /* Long Range - Fast */
    meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST = 0,
-    /* Long Range - Slow */
+    /* Long Range - Slow
+ Deprecated in 2.7: Unpopular slow preset. */
    meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW = 1,
    /* Very Long Range - Slow
 Deprecated in 2.5: Works only with txco and is unusably slow */
@@ -311,7 +312,10 @@ typedef enum _meshtastic_Config_LoRaConfig_ModemPreset {
    /* Short Range - Turbo
 This is the fastest preset and the only one with 500kHz bandwidth.
 It is not legal to use in all regions due to this wider bandwidth. */
-    meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO = 8
+    meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO = 8,
+    /* Long Range - Turbo
+ This preset performs similarly to LongFast, but with 500Khz bandwidth. */
+    meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO = 9
 } meshtastic_Config_LoRaConfig_ModemPreset;

 typedef enum _meshtastic_Config_BluetoothConfig_PairingMode {
@@ -689,8 +693,8 @@ extern "C" {
 #define _meshtastic_Config_LoRaConfig_RegionCode_ARRAYSIZE ((meshtastic_Config_LoRaConfig_RegionCode)(meshtastic_Config_LoRaConfig_RegionCode_BR_902+1))

 #define _meshtastic_Config_LoRaConfig_ModemPreset_MIN meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST
-#define _meshtastic_Config_LoRaConfig_ModemPreset_MAX meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO
-#define _meshtastic_Config_LoRaConfig_ModemPreset_ARRAYSIZE ((meshtastic_Config_LoRaConfig_ModemPreset)(meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO+1))
+#define _meshtastic_Config_LoRaConfig_ModemPreset_MAX meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO
+#define _meshtastic_Config_LoRaConfig_ModemPreset_ARRAYSIZE ((meshtastic_Config_LoRaConfig_ModemPreset)(meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO+1))

 #define _meshtastic_Config_BluetoothConfig_PairingMode_MIN meshtastic_Config_BluetoothConfig_PairingMode_RANDOM_PIN
 #define _meshtastic_Config_BluetoothConfig_PairingMode_MAX meshtastic_Config_BluetoothConfig_PairingMode_NO_PIN
--- a/src/mesh/generated/meshtastic/mesh.pb.cpp
+++ b/src/mesh/generated/meshtastic/mesh.pb.cpp
@@ -24,6 +24,9 @@ PB_BIND(meshtastic_Data, meshtastic_Data, 2)
 PB_BIND(meshtastic_KeyVerification, meshtastic_KeyVerification, AUTO)


+PB_BIND(meshtastic_StoreForwardPlusPlus, meshtastic_StoreForwardPlusPlus, 2)
+
+
 PB_BIND(meshtastic_Waypoint, meshtastic_Waypoint, AUTO)


@@ -121,6 +124,8 @@ PB_BIND(meshtastic_ChunkedPayloadResponse, meshtastic_ChunkedPayloadResponse, AU



+
+



--- a/src/mesh/generated/meshtastic/mesh.pb.h
+++ b/src/mesh/generated/meshtastic/mesh.pb.h
@@ -478,6 +478,22 @@ typedef enum _meshtastic_Routing_Error {
    meshtastic_Routing_Error_RATE_LIMIT_EXCEEDED = 38
 } meshtastic_Routing_Error;

+/* Enum of message types */
+typedef enum _meshtastic_StoreForwardPlusPlus_SFPP_message_type {
+    /* Send an announcement of the canonical tip of a chain */
+    meshtastic_StoreForwardPlusPlus_SFPP_message_type_CANON_ANNOUNCE = 0,
+    /* Query whether a specific link is on the chain */
+    meshtastic_StoreForwardPlusPlus_SFPP_message_type_CHAIN_QUERY = 1,
+    /* Request the next link in the chain */
+    meshtastic_StoreForwardPlusPlus_SFPP_message_type_LINK_REQUEST = 3,
+    /* Provide a link to add to the chain */
+    meshtastic_StoreForwardPlusPlus_SFPP_message_type_LINK_PROVIDE = 4,
+    /* If we must fragment, send the first half */
+    meshtastic_StoreForwardPlusPlus_SFPP_message_type_LINK_PROVIDE_FIRSTHALF = 5,
+    /* If we must fragment, send the second half */
+    meshtastic_StoreForwardPlusPlus_SFPP_message_type_LINK_PROVIDE_SECONDHALF = 6
+} meshtastic_StoreForwardPlusPlus_SFPP_message_type;
+
 /* The priority of this message for sending.
 Higher priorities are sent first (when managing the transmit queue).
 This field is never sent over the air, it is only used internally inside of a local device node.
@@ -782,6 +798,32 @@ typedef struct _meshtastic_KeyVerification {
    meshtastic_KeyVerification_hash2_t hash2;
 } meshtastic_KeyVerification;

+typedef PB_BYTES_ARRAY_T(32) meshtastic_StoreForwardPlusPlus_message_hash_t;
+typedef PB_BYTES_ARRAY_T(32) meshtastic_StoreForwardPlusPlus_commit_hash_t;
+typedef PB_BYTES_ARRAY_T(32) meshtastic_StoreForwardPlusPlus_root_hash_t;
+typedef PB_BYTES_ARRAY_T(240) meshtastic_StoreForwardPlusPlus_message_t;
+/* The actual over-the-mesh message doing store and forward++ */
+typedef struct _meshtastic_StoreForwardPlusPlus {
+    /* Which message type is this */
+    meshtastic_StoreForwardPlusPlus_SFPP_message_type sfpp_message_type;
+    /* The hash of the specific message */
+    meshtastic_StoreForwardPlusPlus_message_hash_t message_hash;
+    /* The hash of a link on a chain */
+    meshtastic_StoreForwardPlusPlus_commit_hash_t commit_hash;
+    /* the root hash of a chain */
+    meshtastic_StoreForwardPlusPlus_root_hash_t root_hash;
+    /* The encrypted bytes from a message */
+    meshtastic_StoreForwardPlusPlus_message_t message;
+    /* Message ID of the contained message */
+    uint32_t encapsulated_id;
+    /* Destination of the contained message */
+    uint32_t encapsulated_to;
+    /* Sender of the contained message */
+    uint32_t encapsulated_from;
+    /* The receive time of the message in question */
+    uint32_t encapsulated_rxtime;
+} meshtastic_StoreForwardPlusPlus;
+
 /* Waypoint message, used to share arbitrary locations across the mesh */
 typedef struct _meshtastic_Waypoint {
    /* Id of the waypoint */
@@ -1310,6 +1352,10 @@ extern "C" {
 #define _meshtastic_Routing_Error_MAX meshtastic_Routing_Error_RATE_LIMIT_EXCEEDED
 #define _meshtastic_Routing_Error_ARRAYSIZE ((meshtastic_Routing_Error)(meshtastic_Routing_Error_RATE_LIMIT_EXCEEDED+1))

+#define _meshtastic_StoreForwardPlusPlus_SFPP_message_type_MIN meshtastic_StoreForwardPlusPlus_SFPP_message_type_CANON_ANNOUNCE
+#define _meshtastic_StoreForwardPlusPlus_SFPP_message_type_MAX meshtastic_StoreForwardPlusPlus_SFPP_message_type_LINK_PROVIDE_SECONDHALF
+#define _meshtastic_StoreForwardPlusPlus_SFPP_message_type_ARRAYSIZE ((meshtastic_StoreForwardPlusPlus_SFPP_message_type)(meshtastic_StoreForwardPlusPlus_SFPP_message_type_LINK_PROVIDE_SECONDHALF+1))
+
 #define _meshtastic_MeshPacket_Priority_MIN meshtastic_MeshPacket_Priority_UNSET
 #define _meshtastic_MeshPacket_Priority_MAX meshtastic_MeshPacket_Priority_MAX
 #define _meshtastic_MeshPacket_Priority_ARRAYSIZE ((meshtastic_MeshPacket_Priority)(meshtastic_MeshPacket_Priority_MAX+1))
@@ -1338,6 +1384,8 @@ extern "C" {
 #define meshtastic_Data_portnum_ENUMTYPE meshtastic_PortNum


+#define meshtastic_StoreForwardPlusPlus_sfpp_message_type_ENUMTYPE meshtastic_StoreForwardPlusPlus_SFPP_message_type
+


 #define meshtastic_MeshPacket_priority_ENUMTYPE meshtastic_MeshPacket_Priority
@@ -1380,6 +1428,7 @@ extern "C" {
 #define meshtastic_Routing_init_default          {0, {meshtastic_RouteDiscovery_init_default}}
 #define meshtastic_Data_init_default             {_meshtastic_PortNum_MIN, {0, {0}}, 0, 0, 0, 0, 0, 0, false, 0}
 #define meshtastic_KeyVerification_init_default  {0, {0, {0}}, {0, {0}}}
+#define meshtastic_StoreForwardPlusPlus_init_default {_meshtastic_StoreForwardPlusPlus_SFPP_message_type_MIN, {0, {0}}, {0, {0}}, {0, {0}}, {0, {0}}, 0, 0, 0, 0}
 #define meshtastic_Waypoint_init_default         {0, false, 0, false, 0, 0, 0, "", "", 0}
 #define meshtastic_MqttClientProxyMessage_init_default {"", 0, {{0, {0}}}, 0}
 #define meshtastic_MeshPacket_init_default       {0, 0, 0, 0, {meshtastic_Data_init_default}, 0, 0, 0, 0, 0, _meshtastic_MeshPacket_Priority_MIN, 0, _meshtastic_MeshPacket_Delayed_MIN, 0, 0, {0, {0}}, 0, 0, 0, 0, _meshtastic_MeshPacket_TransportMechanism_MIN}
@@ -1411,6 +1460,7 @@ extern "C" {
 #define meshtastic_Routing_init_zero             {0, {meshtastic_RouteDiscovery_init_zero}}
 #define meshtastic_Data_init_zero                {_meshtastic_PortNum_MIN, {0, {0}}, 0, 0, 0, 0, 0, 0, false, 0}
 #define meshtastic_KeyVerification_init_zero     {0, {0, {0}}, {0, {0}}}
+#define meshtastic_StoreForwardPlusPlus_init_zero {_meshtastic_StoreForwardPlusPlus_SFPP_message_type_MIN, {0, {0}}, {0, {0}}, {0, {0}}, {0, {0}}, 0, 0, 0, 0}
 #define meshtastic_Waypoint_init_zero            {0, false, 0, false, 0, 0, 0, "", "", 0}
 #define meshtastic_MqttClientProxyMessage_init_zero {"", 0, {{0, {0}}}, 0}
 #define meshtastic_MeshPacket_init_zero          {0, 0, 0, 0, {meshtastic_Data_init_zero}, 0, 0, 0, 0, 0, _meshtastic_MeshPacket_Priority_MIN, 0, _meshtastic_MeshPacket_Delayed_MIN, 0, 0, {0, {0}}, 0, 0, 0, 0, _meshtastic_MeshPacket_TransportMechanism_MIN}
@@ -1489,6 +1539,15 @@ extern "C" {
 #define meshtastic_KeyVerification_nonce_tag     1
 #define meshtastic_KeyVerification_hash1_tag     2
 #define meshtastic_KeyVerification_hash2_tag     3
+#define meshtastic_StoreForwardPlusPlus_sfpp_message_type_tag 1
+#define meshtastic_StoreForwardPlusPlus_message_hash_tag 2
+#define meshtastic_StoreForwardPlusPlus_commit_hash_tag 3
+#define meshtastic_StoreForwardPlusPlus_root_hash_tag 4
+#define meshtastic_StoreForwardPlusPlus_message_tag 5
+#define meshtastic_StoreForwardPlusPlus_encapsulated_id_tag 6
+#define meshtastic_StoreForwardPlusPlus_encapsulated_to_tag 7
+#define meshtastic_StoreForwardPlusPlus_encapsulated_from_tag 8
+#define meshtastic_StoreForwardPlusPlus_encapsulated_rxtime_tag 9
 #define meshtastic_Waypoint_id_tag               1
 #define meshtastic_Waypoint_latitude_i_tag       2
 #define meshtastic_Waypoint_longitude_i_tag      3
@@ -1705,6 +1764,19 @@ X(a, STATIC,   SINGULAR, BYTES,    hash2,             3)
 #define meshtastic_KeyVerification_CALLBACK NULL
 #define meshtastic_KeyVerification_DEFAULT NULL

+#define meshtastic_StoreForwardPlusPlus_FIELDLIST(X, a) \
+X(a, STATIC,   SINGULAR, UENUM,    sfpp_message_type,   1) \
+X(a, STATIC,   SINGULAR, BYTES,    message_hash,      2) \
+X(a, STATIC,   SINGULAR, BYTES,    commit_hash,       3) \
+X(a, STATIC,   SINGULAR, BYTES,    root_hash,         4) \
+X(a, STATIC,   SINGULAR, BYTES,    message,           5) \
+X(a, STATIC,   SINGULAR, UINT32,   encapsulated_id,   6) \
+X(a, STATIC,   SINGULAR, UINT32,   encapsulated_to,   7) \
+X(a, STATIC,   SINGULAR, UINT32,   encapsulated_from,   8) \
+X(a, STATIC,   SINGULAR, UINT32,   encapsulated_rxtime,   9)
+#define meshtastic_StoreForwardPlusPlus_CALLBACK NULL
+#define meshtastic_StoreForwardPlusPlus_DEFAULT NULL
+
 #define meshtastic_Waypoint_FIELDLIST(X, a) \
 X(a, STATIC,   SINGULAR, UINT32,   id,                1) \
 X(a, STATIC,   OPTIONAL, SFIXED32, latitude_i,        2) \
@@ -1980,6 +2052,7 @@ extern const pb_msgdesc_t meshtastic_RouteDiscovery_msg;
 extern const pb_msgdesc_t meshtastic_Routing_msg;
 extern const pb_msgdesc_t meshtastic_Data_msg;
 extern const pb_msgdesc_t meshtastic_KeyVerification_msg;
+extern const pb_msgdesc_t meshtastic_StoreForwardPlusPlus_msg;
 extern const pb_msgdesc_t meshtastic_Waypoint_msg;
 extern const pb_msgdesc_t meshtastic_MqttClientProxyMessage_msg;
 extern const pb_msgdesc_t meshtastic_MeshPacket_msg;
@@ -2013,6 +2086,7 @@ extern const pb_msgdesc_t meshtastic_ChunkedPayloadResponse_msg;
 #define meshtastic_Routing_fields &meshtastic_Routing_msg
 #define meshtastic_Data_fields &meshtastic_Data_msg
 #define meshtastic_KeyVerification_fields &meshtastic_KeyVerification_msg
+#define meshtastic_StoreForwardPlusPlus_fields &meshtastic_StoreForwardPlusPlus_msg
 #define meshtastic_Waypoint_fields &meshtastic_Waypoint_msg
 #define meshtastic_MqttClientProxyMessage_fields &meshtastic_MqttClientProxyMessage_msg
 #define meshtastic_MeshPacket_fields &meshtastic_MeshPacket_msg
@@ -2069,6 +2143,7 @@ extern const pb_msgdesc_t meshtastic_ChunkedPayloadResponse_msg;
 #define meshtastic_QueueStatus_size              23
 #define meshtastic_RouteDiscovery_size           256
 #define meshtastic_Routing_size                  259
+#define meshtastic_StoreForwardPlusPlus_size     371
 #define meshtastic_ToRadio_size                  504
 #define meshtastic_User_size                     115
 #define meshtastic_Waypoint_size                 165
--- a/src/mesh/generated/meshtastic/portnums.pb.h
+++ b/src/mesh/generated/meshtastic/portnums.pb.h
@@ -86,6 +86,11 @@ typedef enum _meshtastic_PortNum {
    /* Paxcounter lib included in the firmware
 ENCODING: protobuf */
    meshtastic_PortNum_PAXCOUNTER_APP = 34,
+    /* Store and Forward++ module included in the firmware
+ ENCODING: protobuf
+ This module is specifically for Native Linux nodes, and provides a Git-style
+ chain of messages. */
+    meshtastic_PortNum_STORE_FORWARD_PLUSPLUS_APP = 35,
    /* Provides a hardware serial interface to send and receive from the Meshtastic network.
 Connect to the RX/TX pins of a device with 38400 8N1. Packets received from the Meshtastic
 network is forwarded to the RX pin while sending a packet to TX will go out to the Mesh network.
--- a/src/modules/AdminModule.cpp
+++ b/src/modules/AdminModule.cpp
@@ -417,6 +417,9 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta
    }
    case meshtastic_AdminMessage_enter_dfu_mode_request_tag: {
        LOG_INFO("Client requesting to enter DFU mode");
+#if HAS_SCREEN
+        IF_SCREEN(screen->showSimpleBanner("Device is rebooting\ninto DFU mode.", 0));
+#endif
 #if defined(ARCH_NRF52) || defined(ARCH_RP2040)
        enterDfuMode();
 #endif
--- a/src/modules/NodeInfoModule.cpp
+++ b/src/modules/NodeInfoModule.cpp
@@ -7,17 +7,41 @@
 #include "configuration.h"
 #include "main.h"
 #include <Throttle.h>
+#include <algorithm>
+
+#ifndef USERPREFS_NODEINFO_REPLY_SUPPRESS_SECS
+#define USERPREFS_NODEINFO_REPLY_SUPPRESS_SECS (12 * 60 * 60)
+#endif

 NodeInfoModule *nodeInfoModule;

+static constexpr uint32_t NodeInfoReplySuppressSeconds = USERPREFS_NODEINFO_REPLY_SUPPRESS_SECS;
+
 bool NodeInfoModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshtastic_User *pptr)
 {
+    suppressReplyForCurrentRequest = false;
+
    if (mp.from == nodeDB->getNodeNum()) {
        LOG_WARN("Ignoring packet supposed to be from our own node: %08x", mp.from);
        return false;
    }

    auto p = *pptr;
+
+    if (mp.decoded.want_response) {
+        const NodeNum sender = getFrom(&mp);
+        const uint32_t now = mp.rx_time ? mp.rx_time : getTime();
+        auto it = lastNodeInfoSeen.find(sender);
+        if (it != lastNodeInfoSeen.end()) {
+            uint32_t sinceLast = now >= it->second ? now - it->second : 0;
+            if (sinceLast < NodeInfoReplySuppressSeconds) {
+                suppressReplyForCurrentRequest = true;
+            }
+        }
+        lastNodeInfoSeen[sender] = now;
+        pruneLastNodeInfoCache();
+    }
+
    if (p.is_licensed != owner.is_licensed) {
        LOG_WARN("Invalid nodeInfo detected, is_licensed mismatch!");
        return true;
@@ -42,6 +66,8 @@ bool NodeInfoModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, mes
        service->sendToPhone(packetCopy);
    }

+    pruneLastNodeInfoCache();
+
    // LOG_DEBUG("did handleReceived");
    return false; // Let others look at this message also if they want
 }
@@ -68,9 +94,11 @@ void NodeInfoModule::sendOurNodeInfo(NodeNum dest, bool wantReplies, uint8_t cha

    if (p) { // Check whether we didn't ignore it
        p->to = dest;
-        p->decoded.want_response = (config.device.role != meshtastic_Config_DeviceConfig_Role_TRACKER &&
+        bool requestWantResponse = (config.device.role != meshtastic_Config_DeviceConfig_Role_TRACKER &&
                                    config.device.role != meshtastic_Config_DeviceConfig_Role_SENSOR) &&
                                   wantReplies;
+
+        p->decoded.want_response = requestWantResponse;
        if (_shorterTimeout)
            p->priority = meshtastic_MeshPacket_Priority_DEFAULT;
        else
@@ -89,6 +117,13 @@ void NodeInfoModule::sendOurNodeInfo(NodeNum dest, bool wantReplies, uint8_t cha

 meshtastic_MeshPacket *NodeInfoModule::allocReply()
 {
+    if (suppressReplyForCurrentRequest) {
+        LOG_DEBUG("Skip send NodeInfo since we heard the requester <12h ago");
+        ignoreRequest = true;
+        suppressReplyForCurrentRequest = false;
+        return NULL;
+    }
+
    if (!airTime->isTxAllowedChannelUtil(false)) {
        ignoreRequest = true; // Mark it as ignored for MeshModule
        LOG_DEBUG("Skip send NodeInfo > 40%% ch. util");
@@ -125,6 +160,29 @@ meshtastic_MeshPacket *NodeInfoModule::allocReply()
    }
 }

+void NodeInfoModule::pruneLastNodeInfoCache()
+{
+    if (!nodeDB || !nodeDB->meshNodes)
+        return;
+
+    const size_t maxEntries = nodeDB->meshNodes->size();
+
+    for (auto it = lastNodeInfoSeen.begin(); it != lastNodeInfoSeen.end();) {
+        if (!nodeDB->getMeshNode(it->first)) {
+            it = lastNodeInfoSeen.erase(it);
+        } else {
+            ++it;
+        }
+    }
+
+    while (!lastNodeInfoSeen.empty() && lastNodeInfoSeen.size() > maxEntries) {
+        auto oldestIt = std::min_element(lastNodeInfoSeen.begin(), lastNodeInfoSeen.end(),
+                                         [](const std::pair<const NodeNum, uint32_t> &lhs,
+                                            const std::pair<const NodeNum, uint32_t> &rhs) { return lhs.second < rhs.second; });
+        lastNodeInfoSeen.erase(oldestIt);
+    }
+}
+
 NodeInfoModule::NodeInfoModule()
    : ProtobufModule("nodeinfo", meshtastic_PortNum_NODEINFO_APP, &meshtastic_User_msg), concurrency::OSThread("NodeInfo")
 {
--- a/src/modules/NodeInfoModule.h
+++ b/src/modules/NodeInfoModule.h
@@ -1,5 +1,6 @@
 #pragma once
 #include "ProtobufModule.h"
+#include <map>

 /**
 * NodeInfo module for sending/receiving NodeInfos into the mesh
@@ -43,6 +44,10 @@ class NodeInfoModule : public ProtobufModule<meshtastic_User>, private concurren
  private:
    uint32_t lastSentToMesh = 0; // Last time we sent our NodeInfo to the mesh
    bool shorterTimeout = false;
+    bool suppressReplyForCurrentRequest = false;
+    std::map<NodeNum, uint32_t> lastNodeInfoSeen;
+
+    void pruneLastNodeInfoCache();
 };

 extern NodeInfoModule *nodeInfoModule;
--- a/src/modules/PositionModule.cpp
+++ b/src/modules/PositionModule.cpp
@@ -349,6 +349,11 @@ void PositionModule::sendOurPosition()

 void PositionModule::sendOurPosition(NodeNum dest, bool wantReplies, uint8_t channel)
 {
+    if (!config.position.fixed_position && !nodeDB->hasLocalPositionSinceBoot()) {
+        LOG_DEBUG("Skip position send; no fresh position since boot");
+        return;
+    }
+
    // cancel any not yet sent (now stale) position packets
    if (prevPacketId) // if we wrap around to zero, we'll simply fail to cancel in that rare case (no big deal)
        service->cancelSending(prevPacketId);
@@ -420,8 +425,12 @@ int32_t PositionModule::runOnce()
        return RUNONCE_INTERVAL;
    }

+    bool waitingForFreshPosition = (lastGpsSend == 0) && !config.position.fixed_position && !nodeDB->hasLocalPositionSinceBoot();
+
    if (lastGpsSend == 0 || msSinceLastSend >= intervalMs) {
-        if (nodeDB->hasValidPosition(node)) {
+        if (waitingForFreshPosition) {
+            LOG_DEBUG("Skip initial position send; no fresh position since boot");
+        } else if (nodeDB->hasValidPosition(node)) {
            lastGpsSend = now;

            lastGpsLatitude = node->position.latitude_i;
--- a/src/modules/StatusLEDModule.cpp
+++ b/src/modules/StatusLEDModule.cpp
@@ -26,7 +26,11 @@ int StatusLEDModule::handleStatusUpdate(const meshtastic::Status *arg)
                power_state = charged;
            }
        } else {
+            if (powerStatus->getBatteryChargePercent() > 5) {
                power_state = discharging;
+            } else {
+                power_state = critical;
+            }
        }
        break;
    }
@@ -58,16 +62,33 @@ int StatusLEDModule::handleStatusUpdate(const meshtastic::Status *arg)

 int32_t StatusLEDModule::runOnce()
 {
+    my_interval = 1000;

    if (power_state == charging) {
        CHARGE_LED_state = !CHARGE_LED_state;
    } else if (power_state == charged) {
        CHARGE_LED_state = LED_STATE_ON;
+    } else if (power_state == critical) {
+        if (POWER_LED_starttime + 30000 < millis() && !doing_fast_blink) {
+            doing_fast_blink = true;
+            POWER_LED_starttime = millis();
+        }
+        if (doing_fast_blink) {
+            PAIRING_LED_state = LED_STATE_OFF;
+            CHARGE_LED_state = !CHARGE_LED_state;
+            my_interval = 250;
+            if (POWER_LED_starttime + 2000 < millis()) {
+                doing_fast_blink = false;
+            }
        } else {
            CHARGE_LED_state = LED_STATE_OFF;
        }

-    if (!config.bluetooth.enabled || PAIRING_LED_starttime + 30 * 1000 < millis()) {
+    } else {
+        CHARGE_LED_state = LED_STATE_OFF;
+    }
+
+    if (!config.bluetooth.enabled || PAIRING_LED_starttime + 30 * 1000 < millis() || doing_fast_blink) {
        PAIRING_LED_state = LED_STATE_OFF;
    } else if (ble_state == unpaired) {
        if (slowTrack) {
--- a/src/modules/StatusLEDModule.h
+++ b/src/modules/StatusLEDModule.h
@@ -31,8 +31,10 @@ class StatusLEDModule : private concurrency::OSThread
    bool PAIRING_LED_state = LED_STATE_OFF;

    uint32_t PAIRING_LED_starttime = 0;
+    uint32_t POWER_LED_starttime = 0;
+    bool doing_fast_blink = false;

-    enum PowerState { discharging, charging, charged };
+    enum PowerState { discharging, charging, charged, critical };

    PowerState power_state = discharging;

--- a/src/nimble/NimbleBluetooth.cpp
+++ b/src/nimble/NimbleBluetooth.cpp
@@ -14,11 +14,11 @@
 #include <atomic>
 #include <mutex>

-#ifdef NIMBLE_TWO
 #include "NimBLEAdvertising.h"
+#ifdef CONFIG_BT_NIMBLE_EXT_ADV
 #include "NimBLEExtAdvertising.h"
-#include "PowerStatus.h"
 #endif
+#include "PowerStatus.h"

 #if defined(CONFIG_NIMBLE_CPP_IDF)
 #include "host/ble_gap.h"
@@ -26,15 +26,12 @@
 #include "nimble/nimble/host/include/host/ble_gap.h"
 #endif

-#if defined(CONFIG_IDF_TARGET_ESP32S3) || defined(CONFIG_IDF_TARGET_ESP32C6)
-
 namespace
 {
 constexpr uint16_t kPreferredBleMtu = 517;
 constexpr uint16_t kPreferredBleTxOctets = 251;
 constexpr uint16_t kPreferredBleTxTimeUs = (kPreferredBleTxOctets + 14) * 8;
 } // namespace
-#endif

 // Debugging options: careful, they slow things down quite a bit!
 // #define DEBUG_NIMBLE_ON_READ_TIMING  // uncomment to time onRead duration
@@ -313,11 +310,9 @@ class BluetoothPhoneAPI : public PhoneAPI, public concurrency::OSThread
    {
        PhoneAPI::onNowHasData(fromRadioNum);

-        int currentNotifyCount = notifyCount.fetch_add(1);
-
-        uint8_t cc = bleServer->getConnectedCount();
-
 #ifdef DEBUG_NIMBLE_NOTIFY
+        int currentNotifyCount = notifyCount.fetch_add(1);
+        uint8_t cc = bleServer->getConnectedCount();
        // This logging slows things down when there are lots of packets going to the phone, like initial connection:
        LOG_DEBUG("BLE notify(%d) fromNum: %d connections: %d", currentNotifyCount, fromRadioNum, cc);
 #endif
@@ -326,13 +321,7 @@ class BluetoothPhoneAPI : public PhoneAPI, public concurrency::OSThread
        put_le32(val, fromRadioNum);

        fromNumCharacteristic->setValue(val, sizeof(val));
-#ifdef NIMBLE_TWO
-        // NOTE: I don't have any NIMBLE_TWO devices, but this line makes me suspicious, and I suspect it needs to just be
-        // notify().
        fromNumCharacteristic->notify(val, sizeof(val), BLE_HS_CONN_HANDLE_NONE);
-#else
-        fromNumCharacteristic->notify();
-#endif
    }

    /// Check the current underlying physical link to see if the client is currently connected
@@ -397,12 +386,7 @@ static uint8_t lastToRadio[MAX_TO_FROM_RADIO_SIZE];

 class NimbleBluetoothToRadioCallback : public NimBLECharacteristicCallbacks
 {
-#ifdef NIMBLE_TWO
-    virtual void onWrite(NimBLECharacteristic *pCharacteristic, NimBLEConnInfo &connInfo)
-#else
-    virtual void onWrite(NimBLECharacteristic *pCharacteristic)
-
-#endif
+    void onWrite(NimBLECharacteristic *pCharacteristic, NimBLEConnInfo &) override
    {
        // CAUTION: This callback runs in the NimBLE task!!! Don't do anything except communicate with the main task's runOnce.
        // Assumption: onWrite is serialized by NimBLE, so we don't need to lock here against multiple concurrent onWrite calls.
@@ -449,11 +433,7 @@ class NimbleBluetoothToRadioCallback : public NimBLECharacteristicCallbacks

 class NimbleBluetoothFromRadioCallback : public NimBLECharacteristicCallbacks
 {
-#ifdef NIMBLE_TWO
-    virtual void onRead(NimBLECharacteristic *pCharacteristic, NimBLEConnInfo &connInfo)
-#else
-    virtual void onRead(NimBLECharacteristic *pCharacteristic)
-#endif
+    void onRead(NimBLECharacteristic *pCharacteristic, NimBLEConnInfo &) override
    {
        // CAUTION: This callback runs in the NimBLE task!!! Don't do anything except communicate with the main task's runOnce.

@@ -561,32 +541,27 @@ class NimbleBluetoothFromRadioCallback : public NimBLECharacteristicCallbacks

 class NimbleBluetoothServerCallback : public NimBLEServerCallbacks
 {
-#ifdef NIMBLE_TWO
  public:
-    NimbleBluetoothServerCallback(NimbleBluetooth *ble) { this->ble = ble; }
+    explicit NimbleBluetoothServerCallback(NimbleBluetooth *ble) : ble(ble) {}

  private:
    NimbleBluetooth *ble;

-    virtual uint32_t onPassKeyDisplay()
-#else
-    virtual uint32_t onPassKeyRequest()
-#endif
+    uint32_t onPassKeyDisplay() override
    {
        uint32_t passkey = config.bluetooth.fixed_pin;

        if (config.bluetooth.mode == meshtastic_Config_BluetoothConfig_PairingMode_RANDOM_PIN) {
            LOG_INFO("Use random passkey");
-            // This is the passkey to be entered on peer - we pick a number >100,000 to ensure 6 digits
            passkey = random(100000, 999999);
        }
-        LOG_INFO("*** Enter passkey %d on the peer side ***", passkey);
+        LOG_INFO("*** Enter passkey %06u on the peer side ***", passkey);

        powerFSM.trigger(EVENT_BLUETOOTH_PAIR);
        meshtastic::BluetoothStatus newStatus(std::to_string(passkey));
        bluetoothStatus->updateStatus(&newStatus);

-#if HAS_SCREEN // Todo: migrate this display code back into Screen class, and observe bluetoothStatus
+#if HAS_SCREEN
        if (screen) {
            screen->startAlert([passkey](OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y) -> void {
                char btPIN[16] = "888888";
@@ -615,39 +590,29 @@ class NimbleBluetoothServerCallback : public NimBLEServerCallbacks
            });
        }
 #endif
-        passkeyShowing = true;

+        passkeyShowing = true;
        return passkey;
    }

-#ifdef NIMBLE_TWO
-    virtual void onAuthenticationComplete(NimBLEConnInfo &connInfo)
-#else
-    virtual void onAuthenticationComplete(ble_gap_conn_desc *desc)
-#endif
+    void onAuthenticationComplete(NimBLEConnInfo &connInfo) override
    {
        LOG_INFO("BLE authentication complete");

        meshtastic::BluetoothStatus newStatus(meshtastic::BluetoothStatus::ConnectionState::CONNECTED);
        bluetoothStatus->updateStatus(&newStatus);

-        // Todo: migrate this display code back into Screen class, and observe bluetoothStatus
        if (passkeyShowing) {
            passkeyShowing = false;
-            if (screen)
+            if (screen) {
                screen->endAlert();
            }
-
-        // Store the connection handle for future use
-#ifdef NIMBLE_TWO
-        nimbleBluetoothConnHandle = connInfo.getConnHandle();
-#else
-        nimbleBluetoothConnHandle = desc->conn_handle;
-#endif
        }

-#ifdef NIMBLE_TWO
-    virtual void onConnect(NimBLEServer *pServer, NimBLEConnInfo &connInfo)
+        nimbleBluetoothConnHandle = connInfo.getConnHandle();
+    }
+
+    void onConnect(NimBLEServer *pServer, NimBLEConnInfo &connInfo) override
    {
        LOG_INFO("BLE incoming connection %s", connInfo.getAddress().toString().c_str());

@@ -672,21 +637,12 @@ class NimbleBluetoothServerCallback : public NimBLEServerCallbacks
        LOG_INFO("BLE conn %u initial MTU %u (target %u)", connHandle, connInfo.getMTU(), kPreferredBleMtu);
        pServer->updateConnParams(connHandle, 6, 12, 0, 200);
    }
-#endif

-#ifdef NIMBLE_TWO
-    virtual void onDisconnect(NimBLEServer *pServer, NimBLEConnInfo &connInfo, int reason)
+    void onDisconnect(NimBLEServer *pServer, NimBLEConnInfo &connInfo, int reason) override
    {
        LOG_INFO("BLE disconnect reason: %d", reason);
-#else
-    virtual void onDisconnect(NimBLEServer *pServer, ble_gap_conn_desc *desc)
-    {
-        LOG_INFO("BLE disconnect");
-#endif
-#ifdef NIMBLE_TWO
        if (ble->isDeInit)
            return;
-#endif

        meshtastic::BluetoothStatus newStatus(meshtastic::BluetoothStatus::ConnectionState::DISCONNECTED);
        bluetoothStatus->updateStatus(&newStatus);
@@ -710,35 +666,69 @@ class NimbleBluetoothServerCallback : public NimBLEServerCallbacks
            bluetoothPhoneAPI->writeCount = 0;
        }

-        // Clear the last ToRadio packet buffer to avoid rejecting first packet from new connection
        memset(lastToRadio, 0, sizeof(lastToRadio));

-        nimbleBluetoothConnHandle = BLE_HS_CONN_HANDLE_NONE; // BLE_HS_CONN_HANDLE_NONE means "no connection"
+        nimbleBluetoothConnHandle = BLE_HS_CONN_HANDLE_NONE;

-#ifdef NIMBLE_TWO
-        // Restart Advertising
        ble->startAdvertising();
-#else
-        NimBLEAdvertising *pAdvertising = NimBLEDevice::getAdvertising();
-        if (!pAdvertising->start(0)) {
-            if (pAdvertising->isAdvertising()) {
-                LOG_DEBUG("BLE advertising already running");
-            } else {
-                LOG_ERROR("BLE failed to restart advertising");
-            }
-        }
-#endif
    }
 };

 static NimbleBluetoothToRadioCallback *toRadioCallbacks;
 static NimbleBluetoothFromRadioCallback *fromRadioCallbacks;

+void NimbleBluetooth::startAdvertising()
+{
+#if defined(CONFIG_BT_NIMBLE_EXT_ADV)
+    NimBLEExtAdvertising *pAdvertising = NimBLEDevice::getAdvertising();
+    NimBLEExtAdvertisement legacyAdvertising;
+
+    legacyAdvertising.setLegacyAdvertising(true);
+    legacyAdvertising.setScannable(true);
+    legacyAdvertising.setConnectable(true);
+    legacyAdvertising.setFlags(BLE_HS_ADV_F_DISC_GEN);
+    if (powerStatus->getHasBattery() == 1) {
+        legacyAdvertising.setCompleteServices(NimBLEUUID((uint16_t)0x180f));
+    }
+    legacyAdvertising.setCompleteServices(NimBLEUUID(MESH_SERVICE_UUID));
+    legacyAdvertising.setMinInterval(500);
+    legacyAdvertising.setMaxInterval(1000);
+
+    NimBLEExtAdvertisement legacyScanResponse;
+    legacyScanResponse.setLegacyAdvertising(true);
+    legacyScanResponse.setConnectable(true);
+    legacyScanResponse.setName(getDeviceName());
+
+    if (!pAdvertising->setInstanceData(0, legacyAdvertising)) {
+        LOG_ERROR("BLE failed to set legacyAdvertising");
+    } else if (!pAdvertising->setScanResponseData(0, legacyScanResponse)) {
+        LOG_ERROR("BLE failed to set legacyScanResponse");
+    } else if (!pAdvertising->start(0, 0, 0)) {
+        LOG_ERROR("BLE failed to start legacyAdvertising");
+    }
+#else
+    NimBLEAdvertising *pAdvertising = NimBLEDevice::getAdvertising();
+    pAdvertising->reset();
+    pAdvertising->addServiceUUID(MESH_SERVICE_UUID);
+    if (powerStatus->getHasBattery() == 1) {
+        pAdvertising->addServiceUUID(NimBLEUUID((uint16_t)0x180f));
+    }
+
+    NimBLEAdvertisementData scan;
+    scan.setName(getDeviceName());
+    pAdvertising->setScanResponseData(scan);
+    pAdvertising->enableScanResponse(true);
+
+    if (!pAdvertising->start(0)) {
+        LOG_ERROR("BLE failed to start advertising");
+    }
+#endif
+    LOG_DEBUG("BLE Advertising started");
+}
+
 void NimbleBluetooth::shutdown()
 {
-    // No measurable power saving for ESP32 during light-sleep(?)
 #ifndef ARCH_ESP32
-    // Shutdown bluetooth for minimum power draw
    LOG_INFO("Disable bluetooth");
    NimBLEAdvertising *pAdvertising = NimBLEDevice::getAdvertising();
    pAdvertising->reset();
@@ -746,7 +736,6 @@ void NimbleBluetooth::shutdown()
 #endif
 }

-// Proper shutdown for ESP32. Needs reboot to reverse.
 void NimbleBluetooth::deinit()
 {
 #ifdef ARCH_ESP32
@@ -760,21 +749,17 @@ void NimbleBluetooth::deinit()
    digitalWrite(BLE_LED, LOW);
 #endif
 #endif
-#ifndef NIMBLE_TWO
-    NimBLEDevice::deinit();
-#endif
 #endif
 }

-// Has initial setup been completed
 bool NimbleBluetooth::isActive()
 {
-    return bleServer;
+    return bleServer != nullptr;
 }

 bool NimbleBluetooth::isConnected()
 {
-    return bleServer->getConnectedCount() > 0;
+    return bleServer && bleServer->getConnectedCount() > 0;
 }

 int NimbleBluetooth::getRssi()
@@ -818,7 +803,7 @@ void NimbleBluetooth::setup()
    LOG_INFO("Init the NimBLE bluetooth module");

    NimBLEDevice::init(getDeviceName());
-    NimBLEDevice::setPower(ESP_PWR_LVL_P9);
+    NimBLEDevice::setPower(9);

 #if NIMBLE_ENABLE_2M_PHY && (defined(CONFIG_IDF_TARGET_ESP32S3) || defined(CONFIG_IDF_TARGET_ESP32C6))
    int mtuResult = NimBLEDevice::setMTU(kPreferredBleMtu);
@@ -851,11 +836,7 @@ void NimbleBluetooth::setup()
        NimBLEDevice::setSecurityIOCap(BLE_HS_IO_DISPLAY_ONLY);
    }
    bleServer = NimBLEDevice::createServer();
-#ifdef NIMBLE_TWO
-    NimbleBluetoothServerCallback *serverCallbacks = new NimbleBluetoothServerCallback(this);
-#else
-    NimbleBluetoothServerCallback *serverCallbacks = new NimbleBluetoothServerCallback();
-#endif
+    auto *serverCallbacks = new NimbleBluetoothServerCallback(this);
    bleServer->setCallbacks(serverCallbacks, true);
    setupService();
    startAdvertising();
@@ -900,11 +881,7 @@ void NimbleBluetooth::setupService()
    NimBLEService *batteryService = bleServer->createService(NimBLEUUID((uint16_t)0x180f)); // 0x180F is the Battery Service
    BatteryCharacteristic = batteryService->createCharacteristic( // 0x2A19 is the Battery Level characteristic)
        (uint16_t)0x2a19, NIMBLE_PROPERTY::READ | NIMBLE_PROPERTY::NOTIFY, 1);
-#ifdef NIMBLE_TWO
    NimBLE2904 *batteryLevelDescriptor = BatteryCharacteristic->create2904();
-#else
-    NimBLE2904 *batteryLevelDescriptor = (NimBLE2904 *)BatteryCharacteristic->createDescriptor((uint16_t)0x2904);
-#endif
    batteryLevelDescriptor->setFormat(NimBLE2904::FORMAT_UINT8);
    batteryLevelDescriptor->setNamespace(1);
    batteryLevelDescriptor->setUnit(0x27ad);
@@ -912,54 +889,12 @@ void NimbleBluetooth::setupService()
    batteryService->start();
 }

-void NimbleBluetooth::startAdvertising()
-{
-#ifdef NIMBLE_TWO
-    NimBLEExtAdvertising *pAdvertising = NimBLEDevice::getAdvertising();
-    NimBLEExtAdvertisement legacyAdvertising;
-
-    legacyAdvertising.setLegacyAdvertising(true);
-    legacyAdvertising.setScannable(true);
-    legacyAdvertising.setConnectable(true);
-    legacyAdvertising.setFlags(BLE_HS_ADV_F_DISC_GEN);
-    if (powerStatus->getHasBattery() == 1) {
-        legacyAdvertising.setCompleteServices(NimBLEUUID((uint16_t)0x180f));
-    }
-    legacyAdvertising.setCompleteServices(NimBLEUUID(MESH_SERVICE_UUID));
-    legacyAdvertising.setMinInterval(500);
-    legacyAdvertising.setMaxInterval(1000);
-
-    NimBLEExtAdvertisement legacyScanResponse;
-    legacyScanResponse.setLegacyAdvertising(true);
-    legacyScanResponse.setConnectable(true);
-    legacyScanResponse.setName(getDeviceName());
-
-    if (!pAdvertising->setInstanceData(0, legacyAdvertising)) {
-        LOG_ERROR("BLE failed to set legacyAdvertising");
-    } else if (!pAdvertising->setScanResponseData(0, legacyScanResponse)) {
-        LOG_ERROR("BLE failed to set legacyScanResponse");
-    } else if (!pAdvertising->start(0, 0, 0)) {
-        LOG_ERROR("BLE failed to start legacyAdvertising");
-    }
-#else
-    NimBLEAdvertising *pAdvertising = NimBLEDevice::getAdvertising();
-    pAdvertising->reset();
-    pAdvertising->addServiceUUID(MESH_SERVICE_UUID);
-    pAdvertising->addServiceUUID(NimBLEUUID((uint16_t)0x180f)); // 0x180F is the Battery Service
-    pAdvertising->start(0);
-#endif
-}
-
 /// Given a level between 0-100, update the BLE attribute
 void updateBatteryLevel(uint8_t level)
 {
    if ((config.bluetooth.enabled == true) && bleServer && nimbleBluetooth->isConnected()) {
        BatteryCharacteristic->setValue(&level, 1);
-#ifdef NIMBLE_TWO
        BatteryCharacteristic->notify(&level, 1, BLE_HS_CONN_HANDLE_NONE);
-#else
-        BatteryCharacteristic->notify();
-#endif
    }
 }

@@ -974,11 +909,7 @@ void NimbleBluetooth::sendLog(const uint8_t *logMessage, size_t length)
    if (!bleServer || !isConnected() || length > 512) {
        return;
    }
-#ifdef NIMBLE_TWO
    logRadioCharacteristic->notify(logMessage, length, BLE_HS_CONN_HANDLE_NONE);
-#else
-    logRadioCharacteristic->notify(logMessage, length, true);
-#endif
 }

 void clearNVS()
--- a/src/nimble/NimbleBluetooth.h
+++ b/src/nimble/NimbleBluetooth.h
@@ -12,16 +12,11 @@ class NimbleBluetooth : BluetoothApi
    bool isConnected();
    int getRssi();
    void sendLog(const uint8_t *logMessage, size_t length);
-#if defined(NIMBLE_TWO)
    void startAdvertising();
-#endif
    bool isDeInit = false;

  private:
    void setupService();
-#if !defined(NIMBLE_TWO)
-    void startAdvertising();
-#endif
 };

 void setBluetoothEnable(bool enable);
--- a/src/platform/portduino/PortduinoGlue.cpp
+++ b/src/platform/portduino/PortduinoGlue.cpp
@@ -29,6 +29,7 @@

 portduino_config_struct portduino_config;
 std::ofstream traceFile;
+std::ofstream JSONFile;
 Ch341Hal *ch341Hal = nullptr;
 char *configPath = nullptr;
 char *optionMac = nullptr;
@@ -463,6 +464,7 @@ void portduinoSetup()
    if (portduino_config.lora_spi_dev != "" && portduino_config.lora_spi_dev != "ch341") {
        SPI.begin(portduino_config.lora_spi_dev.c_str());
    }
+
    if (portduino_config.traceFilename != "") {
        try {
            traceFile.open(portduino_config.traceFilename, std::ios::out | std::ios::app);
@@ -470,6 +472,21 @@ void portduinoSetup()
            std::cout << "*** traceFile Exception " << e.what() << std::endl;
            exit(EXIT_FAILURE);
        }
+        if (!traceFile.is_open()) {
+            std::cout << "*** traceFile open failure" << std::endl;
+            exit(EXIT_FAILURE);
+        }
+    } else if (portduino_config.JSONFilename != "") {
+        try {
+            JSONFile.open(portduino_config.JSONFilename, std::ios::out | std::ios::app);
+        } catch (std::ofstream::failure &e) {
+            std::cout << "*** JSONFile Exception " << e.what() << std::endl;
+            exit(EXIT_FAILURE);
+        }
+        if (!JSONFile.is_open()) {
+            std::cout << "*** JSONFile open failure" << std::endl;
+            exit(EXIT_FAILURE);
+        }
    }
    if (verboseEnabled && portduino_config.logoutputlevel != level_trace) {
        portduino_config.logoutputlevel = level_debug;
@@ -517,6 +534,29 @@ bool loadConfig(const char *configPath)
                portduino_config.logoutputlevel = level_error;
            }
            portduino_config.traceFilename = yamlConfig["Logging"]["TraceFile"].as<std::string>("");
+            portduino_config.JSONFilename = yamlConfig["Logging"]["JSONFile"].as<std::string>("");
+            portduino_config.JSONFilter = (_meshtastic_PortNum)yamlConfig["Logging"]["JSONFilter"].as<int>(0);
+            if (yamlConfig["Logging"]["JSONFilter"].as<std::string>("") == "textmessage")
+                portduino_config.JSONFilter = meshtastic_PortNum_TEXT_MESSAGE_APP;
+            else if (yamlConfig["Logging"]["JSONFilter"].as<std::string>("") == "telemetry")
+                portduino_config.JSONFilter = meshtastic_PortNum_TELEMETRY_APP;
+            else if (yamlConfig["Logging"]["JSONFilter"].as<std::string>("") == "nodeinfo")
+                portduino_config.JSONFilter = meshtastic_PortNum_NODEINFO_APP;
+            else if (yamlConfig["Logging"]["JSONFilter"].as<std::string>("") == "position")
+                portduino_config.JSONFilter = meshtastic_PortNum_POSITION_APP;
+            else if (yamlConfig["Logging"]["JSONFilter"].as<std::string>("") == "waypoint")
+                portduino_config.JSONFilter = meshtastic_PortNum_WAYPOINT_APP;
+            else if (yamlConfig["Logging"]["JSONFilter"].as<std::string>("") == "neighborinfo")
+                portduino_config.JSONFilter = meshtastic_PortNum_NEIGHBORINFO_APP;
+            else if (yamlConfig["Logging"]["JSONFilter"].as<std::string>("") == "traceroute")
+                portduino_config.JSONFilter = meshtastic_PortNum_TRACEROUTE_APP;
+            else if (yamlConfig["Logging"]["JSONFilter"].as<std::string>("") == "detection")
+                portduino_config.JSONFilter = meshtastic_PortNum_DETECTION_SENSOR_APP;
+            else if (yamlConfig["Logging"]["JSONFilter"].as<std::string>("") == "paxcounter")
+                portduino_config.JSONFilter = meshtastic_PortNum_PAXCOUNTER_APP;
+            else if (yamlConfig["Logging"]["JSONFilter"].as<std::string>("") == "remotehardware")
+                portduino_config.JSONFilter = meshtastic_PortNum_REMOTE_HARDWARE_APP;
+
            if (yamlConfig["Logging"]["AsciiLogs"]) {
                // Default is !isatty(1) but can be set explicitly in config.yaml
                portduino_config.ascii_logs = yamlConfig["Logging"]["AsciiLogs"].as<bool>();
--- a/src/platform/portduino/PortduinoGlue.h
+++ b/src/platform/portduino/PortduinoGlue.h
@@ -5,6 +5,7 @@

 #include "LR11x0Interface.h"
 #include "Module.h"
+#include "mesh/generated/meshtastic/mesh.pb.h"
 #include "platform/portduino/USBHal.h"
 #include "yaml-cpp/yaml.h"

@@ -46,6 +47,8 @@ struct pinMapping {
 };

 extern std::ofstream traceFile;
+extern std::ofstream JSONFile;
+
 extern Ch341Hal *ch341Hal;
 int initGPIOPin(int pinNum, std::string gpioChipname, int line);
 bool loadConfig(const char *configPath);
@@ -148,6 +151,9 @@ extern struct portduino_config_struct {
    bool ascii_logs = !isatty(1);
    bool ascii_logs_explicit = false;

+    std::string JSONFilename;
+    meshtastic_PortNum JSONFilter = (_meshtastic_PortNum)0;
+
    // Webserver
    std::string webserver_root_path = "";
    std::string webserver_ssl_key_path = "/etc/meshtasticd/ssl/private_key.pem";
@@ -413,6 +419,29 @@ extern struct portduino_config_struct {
        }
        if (traceFilename != "")
            out << YAML::Key << "TraceFile" << YAML::Value << traceFilename;
+        if (JSONFilename != "") {
+            out << YAML::Key << "JSONFile" << YAML::Value << JSONFilename;
+            if (JSONFilter == meshtastic_PortNum_TEXT_MESSAGE_APP)
+                out << YAML::Key << "JSONFilter" << YAML::Value << "textmessage";
+            else if (JSONFilter == meshtastic_PortNum_TELEMETRY_APP)
+                out << YAML::Key << "JSONFilter" << YAML::Value << "telemetry";
+            else if (JSONFilter == meshtastic_PortNum_NODEINFO_APP)
+                out << YAML::Key << "JSONFilter" << YAML::Value << "nodeinfo";
+            else if (JSONFilter == meshtastic_PortNum_POSITION_APP)
+                out << YAML::Key << "JSONFilter" << YAML::Value << "position";
+            else if (JSONFilter == meshtastic_PortNum_WAYPOINT_APP)
+                out << YAML::Key << "JSONFilter" << YAML::Value << "waypoint";
+            else if (JSONFilter == meshtastic_PortNum_NEIGHBORINFO_APP)
+                out << YAML::Key << "JSONFilter" << YAML::Value << "neighborinfo";
+            else if (JSONFilter == meshtastic_PortNum_TRACEROUTE_APP)
+                out << YAML::Key << "JSONFilter" << YAML::Value << "traceroute";
+            else if (JSONFilter == meshtastic_PortNum_DETECTION_SENSOR_APP)
+                out << YAML::Key << "JSONFilter" << YAML::Value << "detection";
+            else if (JSONFilter == meshtastic_PortNum_PAXCOUNTER_APP)
+                out << YAML::Key << "JSONFilter" << YAML::Value << "paxcounter";
+            else if (JSONFilter == meshtastic_PortNum_REMOTE_HARDWARE_APP)
+                out << YAML::Key << "JSONFilter" << YAML::Value << "remotehardware";
+        }
        if (ascii_logs_explicit) {
            out << YAML::Key << "AsciiLogs" << YAML::Value << ascii_logs;
        }
--- a/src/platform/portduino/USBHal.h
+++ b/src/platform/portduino/USBHal.h
@@ -8,6 +8,9 @@
 #include <iostream>
 #include <libpinedio-usb.h>
 #include <unistd.h>
+extern "C" {
+#include "platform/portduino/ch341a_i2c.h"
+}

 // include the library for Raspberry GPIO pins

@@ -47,6 +50,9 @@ class Ch341Hal : public RadioLibHal
            std::string s = "Could not open SPI: ";
            throw(s + std::to_string(ret));
        }
+        // How to read the eeprom
+        // uint8_t buffer[1024] = {0};
+        // ch341readEEPROM_param(buffer, 0, 128, 128, 8, 1, 0x50, pinedio.handle);

        pinedio_set_option(&pinedio, PINEDIO_OPTION_AUTO_CS, 0);
        pinedio_set_pin_mode(&pinedio, 3, true);
--- a/src/platform/portduino/ch341a_i2c.c
+++ b/src/platform/portduino/ch341a_i2c.c
@@ -0,0 +1,204 @@
+//
+// ch341eeprom programmer version 0.1 (Beta)
+//
+//  Programming tool for the 24Cxx serial EEPROMs using the Winchiphead CH341A IC
+//
+// (c) December 2011 asbokid <ballymunboy@gmail.com>
+//  (c) August 2023 Mikhail Medvedev <e-ink-reader@yandex.ru>
+//   This program is free software: you can redistribute it and/or modify
+//   it under the terms of the GNU General Public License as published by
+//   the Free Software Foundation, either version 3 of the License, or
+//   (at your option) any later version.
+//
+//   This program is distributed in the hope that it will be useful,
+//   but WITHOUT ANY WARRANTY; without even the implied warranty of
+//   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//   GNU General Public License for more details.
+//
+//   You should have received a copy of the GNU General Public License
+//   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+#include "ch341a_i2c.h"
+
+// extern struct libusb_device_handle *handle;
+unsigned char *readbuf;
+uint32_t getnextpkt; // set by the callback function
+uint32_t syncackpkt; // synch / ack flag used by BULK OUT cb function
+uint32_t byteoffset;
+
+// callback functions for async USB transfers
+static void cbBulkIn(struct libusb_transfer *transfer);
+static void cbBulkOut(struct libusb_transfer *transfer);
+
+void ch341ReadCmdMarshall(uint8_t *buffer, uint32_t addr, struct EEPROM *eeprom_info, uint32_t i2c_address)
+{
+    uint8_t *ptr = buffer;
+    uint8_t msb_addr;
+    uint32_t size_kb;
+
+    *ptr++ = CH341_CMD_I2C_STREAM;  // 0
+    *ptr++ = CH341_CMD_I2C_STM_STA; // 1
+    // Write address
+    *ptr++ = CH341_CMD_I2C_STM_OUT | ((*eeprom_info).addr_size + 1); // 2: I2C bus adddress + EEPROM address
+    if ((*eeprom_info).addr_size >= 2) {
+        // 24C32 and more
+        msb_addr = addr >> 16 & (*eeprom_info).i2c_addr_mask;
+        *ptr++ = (i2c_address | msb_addr) << 1; // 3
+        *ptr++ = (addr >> 8 & 0xFF);            // 4
+        *ptr++ = (addr >> 0 & 0xFF);            // 5
+    } else {
+        // 24C16 and less
+        msb_addr = addr >> 8 & (*eeprom_info).i2c_addr_mask;
+        *ptr++ = (i2c_address | msb_addr) << 1; // 3
+        *ptr++ = (addr >> 0 & 0xFF);            // 4
+    }
+    // Read
+    *ptr++ = CH341_CMD_I2C_STM_STA;               // 6/5
+    *ptr++ = CH341_CMD_I2C_STM_OUT | 1;           // 7/6
+    *ptr++ = ((i2c_address | msb_addr) << 1) | 1; // 8/7: Read command
+
+    // Configuration?
+    *ptr++ = 0xE0; // 9/8
+    *ptr++ = 0x00; // 10/9
+    if ((*eeprom_info).addr_size < 2)
+        *ptr++ = 0x10; // x/10
+    memcpy(ptr, "\x00\x06\x04\x00\x00\x00\x00\x00\x00", 9);
+    ptr += 9; // 10
+    size_kb = (*eeprom_info).size / 1024;
+    *ptr++ = size_kb & 0xFF;        // 19
+    *ptr++ = (size_kb >> 8) & 0xFF; // 20
+    memcpy(ptr, "\x00\x00\x11\x4d\x40\x77\xcd\xab\xba\xdc", 10);
+    ptr += 10;
+
+    // Frame 2
+    *ptr++ = CH341_CMD_I2C_STREAM;
+    memcpy(ptr,
+           "\xe0\x00\x00\xc4\xf1\x12\x00\x11\x4d\x40\x77\xf0\xf1\x12\x00"
+           "\xd9\x8b\x41\x7e\x00\xe0\xfd\x7f\xf0\xf1\x12\x00\x5a\x88\x41\x7e",
+           31);
+    ptr += 31;
+
+    // Frame 3
+    *ptr++ = CH341_CMD_I2C_STREAM;
+    memcpy(ptr,
+           "\xe0\x00\x00\x2a\x88\x41\x7e\x06\x04\x00\x00\x11\x4d\x40\x77"
+           "\xe8\xf3\x12\x00\x14\x00\x00\x00\x01\x00\x00\x00\x00\x00\x00\x00",
+           31);
+    ptr += 31;
+
+    // Finalize
+    *ptr++ = CH341_CMD_I2C_STREAM;  // 0xAA
+    *ptr++ = 0xDF;                  // ???
+    *ptr++ = CH341_CMD_I2C_STM_IN;  // 0xC0
+    *ptr++ = CH341_CMD_I2C_STM_STO; // 0x75
+    *ptr++ = CH341_CMD_I2C_STM_END; // 0x00
+
+    assert(ptr - buffer == CH341_EEPROM_READ_CMD_SZ);
+}
+
+// --------------------------------------------------------------------------
+// ch341readEEPROM()
+//      read n bytes from device (in packets of 32 bytes)
+int32_t ch341readEEPROM_param(uint8_t *buffer, uint32_t offset, uint32_t bytestoread, uint32_t ic_size, uint32_t block_size,
+                              uint8_t algorithm, uint32_t i2c_address, struct libusb_device_handle *handle)
+{
+
+    uint8_t ch341outBuffer[EEPROM_READ_BULKOUT_BUF_SZ];
+    uint8_t ch341inBuffer[IN_BUF_SZ]; // 0x100 bytes
+    int32_t ret = 0, readpktcount = 0;
+    struct libusb_transfer *xferBulkIn, *xferBulkOut;
+    struct timeval tv = {0, 100}; // our async polling interval
+    struct EEPROM eeprom_info;
+    eeprom_info.name = "24c01";
+    eeprom_info.size = ic_size;
+    eeprom_info.page_size = (uint16_t)block_size;
+    eeprom_info.addr_size = 0x0f & algorithm;
+    eeprom_info.i2c_addr_mask = (0xf0 & algorithm) / 16;
+
+    xferBulkIn = libusb_alloc_transfer(0);
+    xferBulkOut = libusb_alloc_transfer(0);
+
+    if (!xferBulkIn || !xferBulkOut) {
+        printf("Couldn't allocate USB transfer structures\n");
+        return -1;
+    }
+
+    byteoffset = 0;
+
+    memset(ch341inBuffer, 0, EEPROM_READ_BULKIN_BUF_SZ);
+    ch341ReadCmdMarshall(ch341outBuffer, offset, &eeprom_info, i2c_address); // Fill output buffer
+
+    libusb_fill_bulk_transfer(xferBulkIn, handle, BULK_READ_ENDPOINT, ch341inBuffer, EEPROM_READ_BULKIN_BUF_SZ, cbBulkIn, NULL,
+                              DEFAULT_TIMEOUT);
+
+    libusb_fill_bulk_transfer(xferBulkOut, handle, BULK_WRITE_ENDPOINT, ch341outBuffer, EEPROM_READ_BULKOUT_BUF_SZ, cbBulkOut,
+                              NULL, DEFAULT_TIMEOUT);
+
+    libusb_submit_transfer(xferBulkIn);
+    libusb_submit_transfer(xferBulkOut);
+
+    readbuf = buffer;
+
+    while (1) {
+        ret = libusb_handle_events_timeout(NULL, &tv);
+
+        if (ret < 0 || getnextpkt == -1) { // indicates an error
+            printf("ret from libusb_handle_timeout = %d\n", ret);
+            printf("getnextpkt = %u\n", getnextpkt);
+            if (ret < 0)
+                printf("USB read error : %s\n", strerror(-ret));
+            libusb_free_transfer(xferBulkIn);
+            libusb_free_transfer(xferBulkOut);
+            return -1;
+        }
+        if (getnextpkt == 1) { // callback function reports a new BULK IN packet received
+            getnextpkt = 0;    // reset the flag
+            readpktcount++;    // increment the read packet counter
+            byteoffset += EEPROM_READ_BULKIN_BUF_SZ;
+            if (byteoffset == bytestoread)
+                break;
+
+            libusb_submit_transfer(xferBulkIn); // re-submit request for next BULK IN packet of EEPROM data
+            if (syncackpkt)
+                syncackpkt = 0;
+            // if 4th packet received, we are at end of 0x80 byte data block,
+            // if it is not the last block, then resubmit request for data
+            if (readpktcount == 4) {
+                readpktcount = 0;
+
+                ch341ReadCmdMarshall(ch341outBuffer, byteoffset, &eeprom_info, i2c_address); // Fill output buffer
+                libusb_fill_bulk_transfer(xferBulkOut, handle, BULK_WRITE_ENDPOINT, ch341outBuffer, EEPROM_READ_BULKOUT_BUF_SZ,
+                                          cbBulkOut, NULL, DEFAULT_TIMEOUT);
+
+                libusb_submit_transfer(xferBulkOut); // update transfer struct (with new EEPROM page offset)
+                                                     // and re-submit next transfer request to BULK OUT endpoint
+            }
+        }
+    }
+    libusb_free_transfer(xferBulkIn);
+    libusb_free_transfer(xferBulkOut);
+    return 0;
+}
+
+// Callback function for async bulk in comms
+void cbBulkIn(struct libusb_transfer *transfer)
+{
+    switch (transfer->status) {
+    case LIBUSB_TRANSFER_COMPLETED:
+        // copy read data to our EEPROM buffer
+        memcpy(readbuf + byteoffset, transfer->buffer, transfer->actual_length);
+        getnextpkt = 1;
+        break;
+    default:
+        printf("\ncbBulkIn: error : %d\n", transfer->status);
+        getnextpkt = -1;
+    }
+    return;
+}
+
+// Callback function for async bulk out comms
+void cbBulkOut(struct libusb_transfer *transfer)
+{
+    syncackpkt = 1;
+    return;
+}
--- a/src/platform/portduino/ch341a_i2c.h
+++ b/src/platform/portduino/ch341a_i2c.h
@@ -0,0 +1,43 @@
+// libUSB driver for the ch341a in i2c mode
+//
+// Copyright 2011 asbokid <ballymunboy@gmail.com>
+#ifndef __CH341A_I2C_H__
+#define __CH341A_I2C_H__
+
+#include <assert.h>
+#include <errno.h>
+#include <libusb-1.0/libusb.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#define BULK_WRITE_ENDPOINT 0x02 /* bEndpointAddress 0x02  EP 2 OUT (Bulk)*/
+#define BULK_READ_ENDPOINT 0x82  /* bEndpointAddress 0x82  EP 2 IN  (Bulk)*/
+
+#define DEFAULT_TIMEOUT 300 // 300mS for USB timeouts
+
+#define IN_BUF_SZ 0x100
+#define EEPROM_READ_BULKIN_BUF_SZ 0x20
+#define EEPROM_READ_BULKOUT_BUF_SZ 0x65
+
+#define CH341_CMD_I2C_STREAM 0xAA
+#define CH341_CMD_I2C_STM_STA 0x74
+#define CH341_CMD_I2C_STM_STO 0x75
+#define CH341_CMD_I2C_STM_OUT 0x80
+#define CH341_CMD_I2C_STM_IN 0xC0
+#define CH341_CMD_I2C_STM_END 0x00
+
+#define CH341_EEPROM_READ_CMD_SZ 0x65 /* Same size for all 24cXX read setup and next packets*/
+
+struct EEPROM {
+    char *name;
+    uint32_t size;
+    uint16_t page_size;
+    uint8_t addr_size; // Length of address in bytes
+    uint8_t i2c_addr_mask;
+};
+
+int32_t ch341readEEPROM_param(uint8_t *buffer, uint32_t offset, uint32_t bytestoread, uint32_t ic_size, uint32_t block_size,
+                              uint8_t algorithm, uint32_t i2c_address, struct libusb_device_handle *handle);
+#endif /* __CH341A_I2C_H__ */
--- a/test/test_mqtt/MQTT.cpp
+++ b/test/test_mqtt/MQTT.cpp
@@ -605,12 +605,13 @@ void test_receiveAcksOwnSentMessages(void)

    unitTest->publish(&p, nodeDB->getNodeId().c_str());

-    TEST_ASSERT_TRUE(mockRouter->packets_.empty());
-    TEST_ASSERT_EQUAL(1, mockRoutingModule->ackNacks_.size());
-    const auto &[err, to, idFrom, chIndex, hopLimit] = mockRoutingModule->ackNacks_.front();
-    TEST_ASSERT_EQUAL(meshtastic_Routing_Error_NONE, err);
-    TEST_ASSERT_EQUAL(myNodeInfo.my_node_num, to);
-    TEST_ASSERT_EQUAL(p.id, idFrom);
+    // FIXME: Better assertion for this test
+    // TEST_ASSERT_TRUE(mockRouter->packets_.empty());
+    // TEST_ASSERT_EQUAL(1, mockRoutingModule->ackNacks_.size());
+    // const auto &[err, to, idFrom, chIndex, hopLimit] = mockRoutingModule->ackNacks_.front();
+    // TEST_ASSERT_EQUAL(meshtastic_Routing_Error_NONE, err);
+    // TEST_ASSERT_EQUAL(myNodeInfo.my_node_num, to);
+    // TEST_ASSERT_EQUAL(p.id, idFrom);
 }

 // Should ignore our own messages from MQTT that were heard by other nodes.
--- a/userPrefs.jsonc
+++ b/userPrefs.jsonc
@@ -55,6 +55,7 @@
  // "USERPREFS_MQTT_TLS_ENABLED": "false",
  // "USERPREFS_MQTT_ROOT_TOPIC": "event/REPLACEME",
  // "USERPREFS_RINGTONE_NAG_SECS": "60",
+  // "USERPREFS_NODEINFO_REPLY_SUPPRESS_SECS": "43200",
  "USERPREFS_RINGTONE_RTTTL": "24:d=32,o=5,b=565:f6,p,f6,4p,p,f6,p,f6,2p,p,b6,p,b6,p,b6,p,b6,p,b,p,b,p,b,p,b,p,b,p,b,p,b,p,b,1p.,2p.,p",
  // "USERPREFS_NETWORK_IPV6_ENABLED": "1",
  "USERPREFS_TZ_STRING": "tzplaceholder                                         "
--- a/variants/esp32/betafpv_2400_tx_micro/platformio.ini
+++ b/variants/esp32/betafpv_2400_tx_micro/platformio.ini
@@ -15,4 +15,5 @@ upload_protocol = esptool
 upload_speed = 460800
 lib_deps =
  ${esp32_base.lib_deps}
-  adafruit/Adafruit NeoPixel @ ^1.12.0
+  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
+  adafruit/Adafruit NeoPixel@1.15.2
--- a/variants/esp32/betafpv_900_tx_nano/platformio.ini
+++ b/variants/esp32/betafpv_900_tx_nano/platformio.ini
@@ -13,5 +13,3 @@ board_build.f_cpu = 240000000L
 upload_protocol = esptool
 ;upload_port = /dev/ttyUSB0
 upload_speed = 460800
-lib_deps =
-  ${esp32_base.lib_deps}
--- a/variants/esp32/chatter2/platformio.ini
+++ b/variants/esp32/chatter2/platformio.ini
@@ -9,4 +9,5 @@ build_flags =
  
 lib_deps =
  ${esp32_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7
--- a/variants/esp32/diy/dr-dev/platformio.ini
+++ b/variants/esp32/diy/dr-dev/platformio.ini
@@ -2,6 +2,7 @@
 [env:meshtastic-dr-dev]
 extends = esp32_base
 board = esp32doit-devkit-v1
+board_level = extra
 board_upload.maximum_size = 4194304
 board_upload.maximum_ram_size = 532480
 build_flags =
--- a/variants/esp32/esp32.ini
+++ b/variants/esp32/esp32.ini
@@ -38,6 +38,7 @@ build_flags =
  -DAXP_DEBUG_PORT=Serial
  -DCONFIG_BT_NIMBLE_ENABLED
  -DCONFIG_BT_NIMBLE_MAX_BONDS=6 # default is 3
+  -DCONFIG_BT_NIMBLE_ROLE_CENTRAL_DISABLED
  -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
  -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
  -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=8192
@@ -53,17 +54,18 @@ build_flags =
 lib_deps =
  ${arduino_base.lib_deps}
  ${networking_base.lib_deps}
+  ${networking_extra.lib_deps}
  ${environmental_base.lib_deps}
  ${environmental_extra.lib_deps}
  ${radiolib_base.lib_deps}
  # renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
  https://github.com/meshtastic/esp32_https_server/archive/3223704846752e6d545139204837bdb2a55459ca.zip
  # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
-  h2zero/NimBLE-Arduino@^1.4.3
+  h2zero/NimBLE-Arduino@^2.3.7
  # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
  https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
-  # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
-  https://github.com/lewisxhe/XPowersLib/archive/v0.3.2.zip
+  # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
+  lewisxhe/XPowersLib@0.3.2
  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
--- a/variants/esp32/m5stack_core/platformio.ini
+++ b/variants/esp32/m5stack_core/platformio.ini
@@ -25,4 +25,5 @@ lib_ignore =
  m5stack-core
 lib_deps = 
  ${esp32_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7
--- a/variants/esp32/m5stack_coreink/platformio.ini
+++ b/variants/esp32/m5stack_coreink/platformio.ini
@@ -18,8 +18,10 @@ build_flags =
  -DM5STACK
 lib_deps = 
  ${esp32_base.lib_deps}
-  zinggjm/GxEPD2@^1.6.2
-  lewisxhe/PCF8563_Library@^1.0.1
+  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
+  zinggjm/GxEPD2@1.6.5
+  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
+  lewisxhe/PCF8563_Library@1.0.1
 lib_ignore =
  m5stack-coreink
 monitor_filters = esp32_exception_decoder
--- a/variants/esp32/nano-g1-explorer/platformio.ini
+++ b/variants/esp32/nano-g1-explorer/platformio.ini
@@ -2,8 +2,6 @@
 [env:nano-g1-explorer]
 extends = esp32_base
 board = ttgo-t-beam
-lib_deps =
-  ${esp32_base.lib_deps}
 build_flags = 
  ${esp32_base.build_flags}
  -D NANO_G1_EXPLORER
--- a/variants/esp32/nano-g1/platformio.ini
+++ b/variants/esp32/nano-g1/platformio.ini
@@ -2,8 +2,6 @@
 [env:nano-g1]
 extends = esp32_base
 board = ttgo-t-beam
-lib_deps =
-  ${esp32_base.lib_deps}
 build_flags = 
  ${esp32_base.build_flags}
  -D NANO_G1
--- a/variants/esp32/radiomaster_900_bandit/platformio.ini
+++ b/variants/esp32/radiomaster_900_bandit/platformio.ini
@@ -13,4 +13,5 @@ board_build.f_cpu = 240000000L
 upload_protocol = esptool
 lib_deps =
  ${esp32_base.lib_deps}
+  # renovate: datasource=github-tags depName=STK8xxx-Accelerometer packageName=gjelsoe/STK8xxx-Accelerometer
  https://github.com/gjelsoe/STK8xxx-Accelerometer/archive/v0.1.1.zip
--- a/variants/esp32/radiomaster_900_bandit_micro/platformio.ini
+++ b/variants/esp32/radiomaster_900_bandit_micro/platformio.ini
@@ -15,5 +15,3 @@ build_flags =
  -I variants/esp32/radiomaster_900_bandit_nano
 board_build.f_cpu = 240000000L
 upload_protocol = esptool
-lib_deps =
-  ${esp32_base.lib_deps}
--- a/variants/esp32/radiomaster_900_bandit_nano/platformio.ini
+++ b/variants/esp32/radiomaster_900_bandit_nano/platformio.ini
@@ -10,5 +10,3 @@ build_flags =
  -I variants/esp32/radiomaster_900_bandit_nano
 board_build.f_cpu = 240000000L
 upload_protocol = esptool
-lib_deps =
-  ${esp32_base.lib_deps}
--- a/variants/esp32/station-g1/platformio.ini
+++ b/variants/esp32/station-g1/platformio.ini
@@ -2,8 +2,6 @@
 [env:station-g1]
 extends = esp32_base
 board = ttgo-t-beam
-lib_deps =
-  ${esp32_base.lib_deps}
 build_flags = 
  ${esp32_base.build_flags}
  -D STATION_G1
--- a/variants/esp32/tbeam/platformio.ini
+++ b/variants/esp32/tbeam/platformio.ini
@@ -2,9 +2,8 @@
 [env:tbeam]
 extends = esp32_base
 board = ttgo-t-beam
-board_level = pr
+board_level = extra
 board_check = true
-lib_deps = ${esp32_base.lib_deps}
 build_flags = ${esp32_base.build_flags}
  -D TBEAM_V10
  -I variants/esp32/tbeam
@@ -21,5 +20,7 @@ build_flags =

 lib_deps =
  ${env:tbeam.lib_deps}
-  https://github.com/meshtastic/st7796/archive/refs/tags/1.0.5.zip ; display addon
-  lewisxhe/SensorLib@0.3.1 ; touchscreen addon
+  # renovate: datasource=github-tags depName=meshtastic-st7796 packageName=meshtastic/st7796
+  https://github.com/meshtastic/st7796/archive/1.0.5.zip
+  # renovate: datasource=custom.pio depName=lewisxhe-SensorLib packageName=lewisxhe/library/SensorLib
+  lewisxhe/SensorLib@0.3.1
--- a/variants/esp32/wiphone/platformio.ini
+++ b/variants/esp32/wiphone/platformio.ini
@@ -10,6 +10,9 @@ build_flags =
  -I variants/esp32/wiphone
 lib_deps = 
  ${esp32_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
-  sparkfun/SX1509 IO Expander@^3.0.5
-  pololu/APA102@^3.0.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7
+  # renovate: datasource=custom.pio depName=SX1509 IO Expander packageName=sparkfun/library/SX1509 IO Expander
+  sparkfun/SX1509 IO Expander@3.0.6
+  # renovate: datasource=custom.pio depName=APA102 packageName=pololu/library/APA102
+  pololu/APA102@3.0.0
--- a/variants/esp32c3/diy/esp32c3_super_mini/platformio.ini
+++ b/variants/esp32c3/diy/esp32c3_super_mini/platformio.ini
@@ -4,7 +4,7 @@
 extends = esp32c3_base
 board = esp32-c3-devkitm-1
 build_flags =
-  ${esp32_base.build_flags}
+  ${esp32c3_base.build_flags}
  -D PRIVATE_HW
  -I variants/esp32c3/diy/esp32c3_super_mini
  -D ARDUINO_USB_MODE=1
--- a/variants/esp32c3/esp32c3.ini
+++ b/variants/esp32c3/esp32c3.ini
@@ -4,3 +4,8 @@ custom_esp32_kind = esp32c3

 monitor_speed = 115200
 monitor_filters = esp32_c3_exception_decoder
+
+build_flags =
+	${esp32_base.build_flags}
+	-DCONFIG_BT_NIMBLE_EXT_ADV=1
+	-DCONFIG_BT_NIMBLE_MAX_EXT_ADV_INSTANCES=2
--- a/variants/esp32c3/hackerboxes_esp32c3_oled/platformio.ini
+++ b/variants/esp32c3/hackerboxes_esp32c3_oled/platformio.ini
@@ -3,7 +3,7 @@ extends = esp32c3_base
 board = esp32-c3-devkitm-1
 board_level = extra
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32c3_base.build_flags}
  -D PRIVATE_HW
  -D ARDUINO_USB_MODE=1
  -D ARDUINO_USB_CDC_ON_BOOT=1
--- a/variants/esp32c3/heltec_esp32c3/platformio.ini
+++ b/variants/esp32c3/heltec_esp32c3/platformio.ini
@@ -3,7 +3,7 @@ extends = esp32c3_base
 board = esp32-c3-devkitm-1
 board_level = pr
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32c3_base.build_flags}
  -D HELTEC_HT62
  -I variants/esp32c3/heltec_esp32c3
 monitor_speed = 115200
--- a/variants/esp32c3/heltec_hru_3601/platformio.ini
+++ b/variants/esp32c3/heltec_hru_3601/platformio.ini
@@ -2,8 +2,9 @@
 extends = esp32c3_base
 board = adafruit_qtpy_esp32c3
 build_flags =
-  ${esp32_base.build_flags}
+  ${esp32c3_base.build_flags}
  -D HELTEC_HRU_3601
  -I variants/esp32c3/heltec_hru_3601
 lib_deps = ${esp32c3_base.lib_deps}
-  adafruit/Adafruit NeoPixel @ ^1.12.0
+  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
+  adafruit/Adafruit NeoPixel@1.15.2
--- a/variants/esp32c3/m5stack-stamp-c3/platformio.ini
+++ b/variants/esp32c3/m5stack-stamp-c3/platformio.ini
@@ -3,7 +3,7 @@ extends = esp32c3_base
 board = esp32-c3-devkitm-1
 board_level = extra
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32c3_base.build_flags}
  -D PRIVATE_HW
  -I variants/esp32c3/m5stack-stamp-c3
 monitor_speed = 115200
--- a/variants/esp32c6/m5stack_unitc6l/platformio.ini
+++ b/variants/esp32c6/m5stack_unitc6l/platformio.ini
@@ -12,8 +12,10 @@ build_unflags =
  -D HAS_WIFI
 lib_deps =
  ${esp32c6_base.lib_deps}
-  adafruit/Adafruit NeoPixel@^1.12.3
-  h2zero/NimBLE-Arduino@^2.3.6
+  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
+  adafruit/Adafruit NeoPixel@1.15.2
+  # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
+  h2zero/NimBLE-Arduino@2.3.7
 build_flags = 
  ${esp32c6_base.build_flags}
  -D M5STACK_UNITC6L
@@ -24,7 +26,6 @@ build_flags =
  -D HAS_BLUETOOTH=1
 	-DCONFIG_BT_NIMBLE_EXT_ADV=1
 	-DCONFIG_BT_NIMBLE_MAX_EXT_ADV_INSTANCES=2
-  -D NIMBLE_TWO
 monitor_speed=115200
 lib_ignore =
  NonBlockingRTTTL
--- a/variants/esp32s3/ELECROW-ThinkNode-M5/platformio.ini
+++ b/variants/esp32s3/ELECROW-ThinkNode-M5/platformio.ini
@@ -16,6 +16,9 @@ build_flags =
  -DEINK_BACKGROUND_USES_FAST          ; (Optional) Use FAST refresh for both BACKGROUND and RESPONSIVE, until a limit is reached.

 lib_deps = ${esp32s3_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
  https://github.com/meshtastic/GxEPD2/archive/1655054ba298e0e29fc2044741940f927f9c2a43.zip
-  lewisxhe/PCF8563_Library@^1.0.1
-  maxpromer/PCA9557-arduino @ ^1.0.0
+  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
+  lewisxhe/PCF8563_Library@1.0.1
+  # renovate: datasource=custom.pio depName=PCA9557-arduino packageName=maxpromer/library/PCA9557-arduino
+  maxpromer/PCA9557-arduino@1.0.0
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Jonathan Bennett	a5c3f95dac	Merge branch 'develop' into ch341-read-eeprom	2025-12-20 14:21:46 -06:00
zeropt	3371d3372c	Adding support for InkHUD joystick navigation for the Seeed Wio Tracker L1 E-ink (#8678 ) * TwoButtonExtened mirrors TwoButton but added joystick functionality * basic ui navigation with a joystick settings->joystick.enabled setting added and SETTINGS_VERSION incremented by one in InkHUD/Persistence.h in seeed_wio_tracker_L1_eink/nicheGraphics.h enable joystick and disable "Next Tile" menu item in implement prevTile and prevApplet functions in InkHUD/WindowManager.h,cpp and InkHUD/InkHUD.h,cpp onStickCenterShort, onStickCenterLong, onStickUp, onStickDown, onStickLeft, and onStickRight functions added to: - InkHUD/InkHUD.h,cpp - InkHUD/Events.h,cpp - InkHUD/Applet.h change navigation actions in InkHUD/Events.cpp events based on whether the joystick is enabled or not in seeed_wio_tracker_L1_eink/nicheGraphics.h connect joystick events to the new joystick handler functions * handle joystick input in NotificationApplet and TipsApplet Both the joystick center short press and the user button short press can be used to advance through the Tips applet. dismiss notifications with any joystick input * MenuApplet controls allows menu navigation including a back button * add AlignStickApplet for aligning the joystick with the screen add joystick.aligned and joystick.alignment to InkHUD/Persistence.h for storing alignment status and relative angle create AlignStick applet that prompts the user for a joystick input and rotates the controls to align with the screen AlignStick applet is run after the tips applet if the joystick is enabled and not aligned add menu item for opening the AlignStick applet * update tips applet with joystick controls * format InkHUD additions * fix stroke consistency when resizing joystick graphic * tweak button tips for order consistency * increase joystick debounce * fix comments * remove unnecessary '+' * remap joystick controls to match standard inkHUD behavior Input with a joystick now behaves as follows User Button (joystick center): - short press in applet -> opens menu - long press in applet -> opens menu - short press in menu -> selects - long press in menu -> selects Exit Button: - short press in applet -> switches tile - long press in applet -> nothing for now - short press in menu -> closes menu - long press in menu -> nothing for now --------- Co-authored-by: scobert <scobert57@gmail.com> Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com>	2025-12-20 15:15:42 -05:00
github-actions[bot]	d97e38bafc	Update protobufs (#9028 ) Co-authored-by: jp-bennett <5630967+jp-bennett@users.noreply.github.com>	2025-12-20 13:00:50 -06:00
Jonathan Bennett	cadf151826	In protobuf update, allow develop branch to auto-update (#9027 )	2025-12-20 11:11:21 -06:00
Ben Meadors	4fe1c87e54	Merge branch 'master' into develop	2025-12-20 09:52:08 -06:00
github-actions[bot]	1021d967da	Automated version bumps (#9025 ) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-12-20 09:50:11 -06:00
github-actions[bot]	4f94354f60	Automated version bumps (#9025 ) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-12-20 09:49:25 -06:00
Ben Meadors	6a93cb7b69	Emoji naming convention consistency	2025-12-20 08:07:36 -06:00
Ixitxachitl	b11f292cc4	Additional Emoji (#9020 ) * Refactor emote dimensions to 16x16 pixels Updated the dimensions of various emotes in emotes.h from 30x30 or 25x25 to 16x16 pixels for consistency and optimization. Added new emotes including heart_smile, Heart_eyes, and others, all with the same 16x16 size. This change improves memory usage and aligns with the design specifications for smaller emotes. * Add new emotes and their corresponding bitmap definitions * Add strong emoji and first quarter moon face * Add definitions for new emoji graphics * Fix missing newline at end of file in emotes.cpp * Add new emotes: eyes, eye, shrug, turkey, turkey leg * Add turkey and related emote definitions * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/graphics/emotes.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/graphics/emotes.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/graphics/emotes.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/graphics/emotes.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/graphics/emotes.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/graphics/emotes.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/graphics/emotes.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-12-20 07:50:03 -06:00
Ben Meadors	217abc4c10	fmt	2025-12-20 07:05:47 -06:00
Austin	e6af68bd14	Actions: Compact manifest job output summary (#8957 )	2025-12-20 07:04:52 -06:00
Jason P	530f0135ee	Macro guard heap_caps_malloc_extmem_enable from SENSECAP_INDICATOR (#9007 )	2025-12-20 07:04:07 -06:00
korbinianbauer	208a873c4c	CLIENT_BASE: Act like ROUTER_LATE for fav'd nodes, instead of like ROUTER (#8567 ) * Client_Base - Dont rebroadcast in early (Router) window Removed early rebroadcast check for CLIENT_BASE role. * Client_Base - Clamp rebroadcast to late (Router_Late) window on dupe * Only clamp to Router_Late window if packet from fav'd node --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-12-20 07:03:53 -06:00
Austin	f57eb6f27d	rp2xx0: Update to arduino-pico 5.4.4 (#8979 )	2025-12-20 07:03:41 -06:00
Jason P	155cdf9f9d	Add Rebooting to DFU mode notification as a simple pop-up (#8970 ) * Add DFU notification as a simple pop-up * Add safe conditional of IF_SCREEN * Forgot #if HAS_SCREEN	2025-12-20 07:03:10 -06:00
Ben Meadors	661f49ad7a	For our first position send on boot, validate that we have received a fresh position (#9023 )	2025-12-20 07:01:00 -06:00
Ben Meadors	31e55d0b66	Be more judicious about responding to want_response in existing meshes (#9014 ) * Be more judicious about sending want_response in existing meshes and responding to nodes we already heard from * Turns out we don't actually use this	2025-12-19 13:56:10 -06:00
korbinianbauer	ee6449746b	CLIENT_BASE: Act like ROUTER_LATE for fav'd nodes, instead of like ROUTER (#8567 ) * Client_Base - Dont rebroadcast in early (Router) window Removed early rebroadcast check for CLIENT_BASE role. * Client_Base - Clamp rebroadcast to late (Router_Late) window on dupe * Only clamp to Router_Late window if packet from fav'd node --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-12-19 07:45:35 -06:00
github-actions[bot]	85aba3a4f7	Upgrade trunk (#9011 ) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>	2025-12-19 05:36:16 -06:00
Jonathan Bennett	5262233b2d	More blinkenlights work for Thinknode-m3 (#8940 ) * More blinkenlights work for Thinknode-m3 * Update src/mesh/NodeDB.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-12-17 19:52:55 -06:00
Jason P	e9db03d185	Macro guard heap_caps_malloc_extmem_enable from SENSECAP_INDICATOR (#9007 )	2025-12-17 14:46:35 -06:00
Austin	176d8def48	PlatformIO: Restructure networking_base for re-use (#8964 )	2025-12-17 12:47:09 -06:00
Jonathan Bennett	5b299f3ede	Prep work for better Store and Forward (#8999 ) * make channels.h getHash public * router.* make the encrypted packet copy available for modules to access * Update src/mesh/Router.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Set p_encrypted to nullptr after release --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-12-17 12:03:29 -06:00
Austin	96c42229b0	Renovate all the things (#8994 )	2025-12-17 11:05:48 -06:00
Ben Meadors	40f1f91c0d	Upgrade all esp32 targets to NimBLE 2.X (#9003 ) * Upgrade all esp32 targets to NimBLE 2.X * Remove guard	2025-12-17 10:40:33 -06:00
github-actions[bot]	269dee7a2d	Upgrade trunk (#9000 ) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>	2025-12-17 06:07:19 -06:00
Jonathan Bennett	f1aefc4eef	Detect if NTP is active on native (#8962 ) * Detect if NTP is active on native * Drop debug warning	2025-12-16 20:40:29 -06:00
Ben Meadors	203826374c	Merge branch 'master' into develop	2025-12-16 11:45:08 -06:00
Ben Meadors	8e0547e76d	Implement Long Turbo preset (#8985 ) * Implement Long_Turbo preset * Oops * Start to DRY up menu handler by actually using OO concepts instead of jank separate arrays * Move the implementation back into the method * Dummy comment * Listen to copilot feedback and prevent dangling pointer * Static and optional	2025-12-16 11:42:13 -06:00
github-actions[bot]	8a48321555	Upgrade trunk (#8989 ) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>	2025-12-16 06:17:03 -06:00
Austin	917794ebab	PIO: Remove useless inheritence (references extends env) (#8987 ) Remove lib_deps section for all PlatformIO envs which are unneeded (only references the `extends` lib_deps, thus pointless) This makes the configs more concise and make future PIO variants/ libdeps audits easier.	2025-12-16 15:38:10 +11:00
Austin	ed77ba5612	Replace PIO fuzzy version matches (reproducible builds) (#8984 ) This change does not introduce version changes, but simply "updates" to the version already being referenced by the fuzzy-match (^)	2025-12-15 19:48:34 -06:00
Austin	eafa8c7b47	PIO: Fix ESP32 sub-variant inheritance (#8983 )	2025-12-15 19:04:03 -06:00
renovate[bot]	aa8bb6c6f1	Update meshtastic/device-ui digest to 862ed04 (#8980 ) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	2025-12-15 16:52:23 -06:00
github-actions[bot]	1952982896	Update protobufs (#8982 ) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-12-15 16:51:59 -06:00
Austin	024ac74f5c	rp2xx0: Update to arduino-pico 5.4.4 (#8979 )	2025-12-15 16:09:59 -06:00
renovate[bot]	de2b9632bb	Update GitHub Artifact Actions (#8954 ) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	2025-12-15 06:52:40 -06:00
github-actions[bot]	c2b7dc2641	Upgrade trunk (#8976 ) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>	2025-12-15 06:47:00 -06:00
Ben Meadors	d0d375f1ff	Merge pull request #8973 from meshtastic/master Backmerge	2025-12-14 14:51:16 -06:00
Jason P	e8ebfc0513	Add Rebooting to DFU mode notification as a simple pop-up (#8970 ) * Add DFU notification as a simple pop-up * Add safe conditional of IF_SCREEN * Forgot #if HAS_SCREEN	2025-12-14 14:50:41 -06:00
Austin	bf32f17f28	Actions: Compact manifest job output summary (#8957 )	2025-12-13 12:32:01 +11:00
Jonathan Bennett	b74238194b	Add JSON packet recording option to native (#8930 )	2025-12-12 18:30:43 -06:00
Ben Meadors	5d5819b876	Skipp assertion on this test for now	2025-12-12 16:26:01 -06:00
Tom Fifield	f127702bef	Fix GPS Buffer full issue on NRF52480 (Seeed T1000E) (#8956 ) We set the buffer size to about a byte on NRF52480, less than other platforms: esp32.ini: -DSERIAL_BUFFER_SIZE=4096 esp32c6.ini: -DSERIAL_BUFFER_SIZE=4096 nrf52.ini: -DSERIAL_BUFFER_SIZE=1024 However, 115200 baud, like the T1000e uses is about 12 times that - almost 15 bytes per millisecond. 15 bytes * 200 millisecond (our GPS poll rate) = 3000 bytes, which is longer than our buffer on the nrf52 platform. This causes "GPS Buffer full" errors on the T1000e and other devices based on NRF52480 with newer GPS chips. This patch increases SERIAL_BUFFER_SIZE for nrf52480 to 4096 to align with other platforms. It keeps the original 1024 for the nrf52832, which has fewer resources. Fixes https://github.com/meshtastic/firmware/issues/5767	2025-12-12 16:23:23 -06:00
Ben Meadors	cce8cbfe34	Mark implicit ACK for MQTT as MQTT transport (#8939 ) (#8947 ) * Mark implicit ACK for MQTT as MQTT transport * TRUNK * Fix build * Make sure implicit ACKs from MQTT do not stop retransmissions in ReliableRouter --------- Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com>	2025-12-12 05:21:08 -06:00
github-actions[bot]	a4a6c3509a	Upgrade trunk (#8946 ) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>	2025-12-12 05:20:12 -06:00
Igor Danilov	c8628b3422	Fix #8899 [Bug]: [TloraPager] RotaryEncoder crash (#8933 ) * Fix #8899 [Bug]: [TloraPager] RotaryEncoder crash * Apply Copilot review --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-12-11 19:04:15 -06:00
renovate[bot]	2ac74d6677	Update actions/cache action to v5 (#8944 ) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	2025-12-11 19:03:14 -06:00
Ben Meadors	9d487ddc0d	Merge pull request #8945 from meshtastic/develop Develop to master	2025-12-11 19:02:56 -06:00
renovate[bot]	4ef943f204	Update meshtastic/device-ui digest to 2746a1c (#8936 ) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	2025-12-11 10:32:28 -06:00
Jonathan Bennett	a8fa5f25cb	Properly turn off power pins at shutdown for m3 (#8935 )	2025-12-11 10:23:45 -06:00
Ben Meadors	3b2a1547de	More board_level extras	2025-12-11 06:23:08 -06:00
github-actions[bot]	6f725a1996	Upgrade trunk (#8932 ) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>	2025-12-11 05:25:46 -06:00
Ben Meadors	f8489773a8	Update src/platform/portduino/ch341a_i2c.c Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-10-07 17:05:04 +11:00
Ben Meadors	8a31276ae7	Update src/platform/portduino/ch341a_i2c.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-10-07 17:05:04 +11:00
Jonathan Bennett	4e23fac167	Move includes to header	2025-10-07 17:05:04 +11:00
Jonathan Bennett	c7dd670e61	Add scaffolding to read EEPROM data from ch341	2025-10-07 17:05:04 +11:00
				`@@ -33,3 +33,5 @@ PB_BIND(meshtastic_KeyVerificationAdmin, meshtastic_KeyVerificationAdmin, AUTO)`