* Fix LED pinout for T-Echo board marked v1.0, date 2021-6-28
* Merge PR #420
* Fixed double and missing Default class.
* Use correct format specifier and fixed typo.
* Removed duplicate code.
* Fix error: #if with no expression
* Fix warning: extra tokens at end of #endif directive.
* Fix antenna switching logic. Complementary-pin control logic is required on the rp2040-lora board.
* Fix deprecated macros.
* Set RP2040 in dormant mode when deep sleep is triggered.
* Fix array out of bounds read.
* Admin key count needs to be set otherwise the key will be zero loaded after reset.
* Don't reset the admin key size when loading defaults. Preserve an existing key in config if possible.
* Remove log spam when reading INA voltage sensor.
* Remove static declaration for admin keys from userPrefs.h. Load hard coded admin keys in case config file has empty slots.
* Removed newlines from log.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
* add canned message and keyboard in indicator board
* Added virtual keyboard macro and enabled for Indicator
* Cleanup macros by applying USE_VIRTUAL_KEYBOARD and DISPLAY_CLOCK_FRAME
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* more userPrefs.h
Added PKI Admin keys to userPrefs.h
* Update userPrefs.h
Allows all 3 PKI keys to be added to userPrefs.h (#4969)
* Update NodeDB.cpp
Trunk
* Update userPrefs.h
Changed wording
* Create base64_to_hex.py
A little tool for converting base64 PKI Keys to decoded byte that userPrefs.h can understand.
* more userPrefs.h
Added PKI Admin keys to userPrefs.h
* Update userPrefs.h
Allows all 3 PKI keys to be added to userPrefs.h (#4969)
* Update NodeDB.cpp
Trunk
* Update userPrefs.h
Changed wording
* Create base64_to_hex.py
A little tool for converting base64 PKI Keys to decoded byte that userPrefs.h can understand.
* Add support for is_ignored bool in NodeInfo
* is_ignored is not a boring node either
* Clean out metrics and position
* Clear the key too
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Improve the processing speed of virtual keyboards
* Remove the disable GPS feature, as it would interfere with the normal use of TFT
* Changed the default screen sleep time to 30s
* Rename platform rak10701 -> rak wismeshtap
* Fixed rak wismeshtap turned off gps caused the screen not to display
* Reduce the size of the flash, otherwise uf2 will not work
Co-authored-by: Daniel Cao <daniel.cao@rakwireless.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
NodeDB becoming full at 100 entries and cycling out old entries is normal behaviour. The user doesn't need to take any action and shouldn't be concerned when this happens.
Remove the warning from the screen and reduce loglevel to info.
remove newline from logging statements in code. The LOG_* functions will now magically add it at the end.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add stub health telemetry module
* Add detection for MAX30102 Health Sensor
It lives on I2C bus at 0x57, which conflicts with an existing
sensor. Add code to check the PARTID register for its response 0x15
per spec.
* Add detection for MLX90614
An IR Temperature sensor suitable for livestock monitoring.
* Add libraries for MLX90614 and MAX30102 sensors
* Fix Trunk
* Add support for MLX90614 IR Temperature Sensor
* Add support for MAX30102 (Temperature)
* Make it build - our first HealthTelemetry on the mesh.
If a MAX30102 is connected, its temperature will be sent to the
mesh as HealthTelemetry.
* Add spo2 and heart rate calculations to MAX30102
* Switch MLX90614 to Adafruit library
Sparkfun was having fun with SDA/SCL variables which we can avoid
by switching to this highly similar library.
* Enable HealthTelemetry if MLX90614 detected
* Change MLX90614 emissivity for human skin.
* Add health screen!
* Remove autogenerated file from branch
* Preparing for review
* Fix MeshService master sync from before.
* Prepare for review
* For the americans
* Fix native build
* Fix for devices with no screen
* Remove extra log causing issues
---------
Co-authored-by: Tom Fifield <tom@tomfifield.net>
* Fix LED pinout for T-Echo board marked v1.0, date 2021-6-28
* Merge PR #420
* Fixed double and missing Default class.
* Use correct format specifier and fixed typo.
* Removed duplicate code.
* Fix error: #if with no expression
* Fix warning: extra tokens at end of #endif directive.
* Fix antenna switching logic. Complementary-pin control logic is required on the rp2040-lora board.
* Fix deprecated macros.
* Set RP2040 in dormant mode when deep sleep is triggered.
* Fix array out of bounds read.
* Admin key count needs to be set otherwise the key will be zero loaded after reset.
* Don't reset the admin key size when loading defaults. Preserve an existing key in config if possible.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* added up to 3 channels via userprefs
* added up to 3 channels via userprefs
* added up to 3 channels via userprefs
* trunk fmt
* Added USERPREFS for GPS MODE
* Add option to preserve private key for factory reset (config)
* Typo fix
* Copy the key in the right direction, and set the size.
* Don't set the key size back to 0 right after setting it to 32.
* Set the key size before using it to do a memcpy.
* Use the right key_size for backing up private_key
* Don't factoryReset() for a missing nodeDB
* Disable Bluetooth in AdminModule when resetting device settings or nodeDB to avoid race
* Add checks for valid objects before deinit bluetooth
* Add disableBluetooth to handleSetConfig, handleSetModuleConfig, and commit settings
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* All the debug
* Change `memccpy()` to `memcpy()`
* Brint all the bytes of the MAC Address from the NodeDB
* Check for blank MAC Address in ourown NodeDB entry
* One more `memccpy()`
* Clean-up debug log
---------
Co-authored-by: GUVWAF <thijs@havinga.eu>
