* [WIP] Add RAK12035VB Soil Moisture Sensor support
Introduce the RAK12035 sensor as an environmental telemetry sensor,
including necessary calibration checks and default values. Update
relevant files to integrate the sensor into the existing telemetry system.
This hardware is not just one module, but a couple.. RAK12023 and
RAK12035 is the component stack, the RAK12023 does not seem to matter
much and allows for multiple RAK12035 devices to be used.
Co-Authored-By: @Justin-Mann
* [WIP] Add RAK12035VB Soil Moisture Sensor support
Introduce the RAK12035 sensor as an environmental telemetry sensor,
including necessary calibration checks and default values. Update
relevant files to integrate the sensor into the existing telemetry system.
This hardware is not just one module, but a couple.. RAK12023 and
RAK12035 is the component stack, the RAK12023 does not seem to matter
much and allows for multiple RAK12035 devices to be used.
Co-Authored-By: @Justin-Mann
* [WIP] Add RAK12035VB Soil Moisture Sensor support
Introduce the RAK12035 sensor as an environmental telemetry sensor,
including necessary calibration checks and default values. Update
relevant files to integrate the sensor into the existing telemetry system.
This hardware is not just one module, but a couple.. RAK12023 and
RAK12035 is the component stack, the RAK12023 does not seem to matter
much and allows for multiple RAK12035 devices to be used.
Co-Authored-By: @Justin-Mann
* [WIP] Add RAK12035VB Soil Moisture Sensor support
Introduce the RAK12035 sensor as an environmental telemetry sensor,
including necessary calibration checks and default values. Update
relevant files to integrate the sensor into the existing telemetry system.
This hardware is not just one module, but a couple.. RAK12023 and
RAK12035 is the component stack, the RAK12023 does not seem to matter
much and allows for multiple RAK12035 devices to be used.
Co-Authored-By: @Justin-Mann
* Update to 1.0.4 release of RAK12035_SoilMoisture
* cleanup
* cool
* .
* ..
* little bit of cleanup and recompile/upload/test on RAK WISBLAOCK STACK: RAK19007/RAK4631/RAK12035VB/RAK12500
looks like soil monitor is working correctly, new environmental metrics are comming thru [new protos soil_moisture, soil_temperature] and GPS is working again with the RAK 12500.
improvements could be made around the configuration of the monitor.
next steps include updating the client(s) to react to, log and display the new proto metrics for soil temp and humidity.
* . comments about current limitations and TODOs
* trunk update
* trying to autoformat..
* fix formatting attempt 2
* ..
* ...
* ...
* .
* some corrections and local build success
* correction in temp code
* grr formatting
* cleanup after a few experiments
* remove temp code to overwrite values for temp and humidity protos.. next step just update the clients to know about soil_temperature and soil_humidity protos.
* update some values in varient for rak wistap
* working out trunk formatting..
* wip
. corrections to other build variants
* .
* protobuffs?
* protobufs?
* Update protobufs ref
* Protobufs ref
* Trunk
* Update RAK12035Sensor.cpp
* Fmt
* comment changes
* dumb mistakes... resolved, actually built and tested.. all good..
* Update src/modules/Telemetry/Sensor/RAK12035Sensor.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update src/modules/Telemetry/Sensor/RAK12035Sensor.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* . proto submod
* proto
* proto
* merge master
* mabe a fix for GPS pin conflict, waiting on a new gps module to try
* merge master, attempt to fix gps (RAK12500) pin conflict with RAK12023/12035
* .
* .
---------
Co-authored-by: Tom Fifield <tom@tomfifield.net>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Fix position exchange throttling race condition
Separate tracking of position broadcasts vs replies to fix exchange position functionality.
Previously, allocReply() would refuse to send position replies if any position packet
(broadcast or reply) was sent within the last 3 minutes. This caused the exchange
position feature to fail when a device had recently sent a position broadcast.
Changes:
- Add lastSentReply member to track position reply timestamps separately
- Update allocReply() to only throttle based on previous replies, not broadcasts
- This allows position exchange to work even after recent position broadcasts
The fix maintains the 3-minute throttling for replies to prevent spam while allowing
legitimate position exchange functionality to work properly.
* Remove unused lastSentToMesh variable
Variable was no longer used after separating reply throttling logic.
* Update RCWL9620Sensor.cpp
test on rak11310, work very wel now
* Update RCWL9620Sensor.cpp
* Trunk
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* More low-entropy keys, and don't issue a false warning when changing node name
* CopyPasta Wasn't Tasty
* When the phone sets the publickey size to 0, regenerate right away
* Say issue #6867 about adding validation for long_name and short_name. Firmware should expect at least 1 non-whitespace character for both long_name and short_name. added the USERPREFS_CONFIG_DEVICE_ROLE example to userPrefs.jsonc
* Validation for user long_name and short_name implemented. No longer can use whitespace characters. Return BAD_REQUEST error responses when validation fails and warning logs when validation rejects invalid names.
* Improve whitespace validation for user names with ctype.h, ensure logging works
* Add whitespace validation to ham mode to prevent validation bypass and to match python cli command
* punctuation change
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Added full support for LTR390UV readings of UV and Lux
* Trunk formatting
* Added full support for LTR390UV readings of UV and Lux
* Trunk formatting
* fix library check and unnecessary bit resolution change
* fixed log info messages and removed unused dependency
* Hopefully fixes git mess
* fix variable scope and getMetrics returns
* set metrics flags bavk to false in case something wrong happens while reading LTR390UV mode
---------
Co-authored-by: Domingo <domingo@waxman.local>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Coerce user.id to always be derive from the nodenum
* Additionally null it out on send
* Revert "Additionally null it out on send"
This reverts commit 22a2d68723.
This is an I2C temperature sensor. It is intended to be a drop-in
compatible sensor for the LM75, however it is more accurate.
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add std::string exec() function to PortduinoGlue for future work
* MVP for HostMetrics module.
* Fix compilation for other targets
* Remove extra debug calls
* Big numbers don't do well as INTs.
* Add HostMetrics to config.yaml
* Add __has_include blocks for sensors
* Put BMP and BME back in the right sensors
* Split environmental_base to environmental_extra, to compile the working sensor libs for Native
* Remove hard-coded checks for ARCH_PORTDUINO
* Un-clobber bmx160
* Move BusIO to environmental_extra due to Armv7 compile error
* Move to forked BusIO for the moment
* Switch to Meshtastic ICM-20948 lib for Portduino support
* Use 20948 for compass direction
* Compass is more than just RAK4631
* Cleanup for 20948 compass
* use Meshtastic branch of 20948 lib
* Check for HAS_SCREEN for showing calibration screen
* No accelerometerThread on STM32
* Erase InkHUD settings on factory reset
* Documentation
* Captialn't
Lower case m. Also move the include statement to .cpp, because it doesn't really need to be in the .h
* support manually shutting off power to the PMSA003I sensor when we aren't doing a telemetry reading
* add comment about PMSA003I_WARMUP_MS to AirQualityTelemetry.cpp
* fix typos, use arduino gpio defines instead of magic numbers
* support manually shutting off power to the PMSA003I sensor when we aren't doing a telemetry reading
* add comment about PMSA003I_WARMUP_MS to AirQualityTelemetry.cpp
* fix typos, use arduino gpio defines instead of magic numbers
* RAK4631: add PMSA003I_ENABLE_PIN define
* fix indentation
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* First addition of __has_include for sensor support
* Add __has_include blocks for sensors
* Put BMP and BME back in the right sensors
* Make TelemetrySensor::setup() a pure virtual finction
* Split environmental_base to environmental_extra, to compile the working sensor libs for Native
* Remove hard-coded checks for ARCH_PORTDUINO
* Un-clobber bmx160
* Move BusIO to environmental_extra due to Armv7 compile error
* Move to forked BusIO for the moment
* Enable HAS_SENSOR for Portduino
* Move back to Adafruit BusIO after patch
* compiling, untested
* use INCLUDE not EXLUDE for option to include module
* protobuf update
* working genericthread module
Update protobufs
* use EXCLUDE style instead of INCLUDE
* Update Modules.cpp
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Added initial support for Texas Instrument LP5562
* Added proper support for Ambient Lighting
* Code merge for all RBG_LED enabled devices
* Fixed forgotten log_info & added firstRGBLED()
Small change to make the string parsing of Name = value less brittle. Adds a function to parse a line without knowing how many spaces are after the = sign. This allows it to also work with the ws80 serial output.
The Range Test Module was defined-out by architecture.
No reason it shouldn't work, so add PORTDUINO to the list of
architectures that compile this module.
Tested on Ubuntu. Enables without crashing, will send packets on
the set time. However, for now the CSV file download does not appear
to work.
Partially fixes https://github.com/meshtastic/firmware/issues/5618
* dps310: initial scan support
* dps310 sensor support
* new protobufs
* new protobufs
* address cr
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
