* PacketHistory debloat RAM allocations
* Removed FLOOD_EXPIRE_TIME option. We have static buffer now.
* Remove mx_ prefix from recentPackets
* Remember no less than 100 packet not to make reflood hell
* Cleanup
* PacketHistory max no less than 100
* no less than 100 means max of 100 or a given value of course.
* Care to not do duplicate entries. Cleanups.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Update RCWL9620Sensor.cpp
test on rak11310, work very wel now
* Update RCWL9620Sensor.cpp
* Trunk
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* More low-entropy keys, and don't issue a false warning when changing node name
* CopyPasta Wasn't Tasty
* When the phone sets the publickey size to 0, regenerate right away
* add support for GAT562 Mesh Trial Tracker
* Hardware Model Definition for GAT562_MESH_TRIAL_TRACKER
* Added RAK4630 for led pin 2 (blue)
* Added RAK4630 for led pin 2 (blue) comment
* don't touch src/mesh/NodeDB.cpp
* set fixed baudrate for gat562_mesh_trial_tracker
* adjust the order of the HW_VENDOR defines
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
* Strip redundant code from E-Ink driver
* Begin polling for E-Ink update completion sooner
In some cases, we might be waiting longer than we need to.
* E-Ink driver for WeAct 1.54" display
Currently identical to the popular GDEY0154D67 model. Kept separate now in case the drivers need to diverge in future.
* Put back code which sets the number of gate lines
* Say issue #6867 about adding validation for long_name and short_name. Firmware should expect at least 1 non-whitespace character for both long_name and short_name. added the USERPREFS_CONFIG_DEVICE_ROLE example to userPrefs.jsonc
* Validation for user long_name and short_name implemented. No longer can use whitespace characters. Return BAD_REQUEST error responses when validation fails and warning logs when validation rejects invalid names.
* Improve whitespace validation for user names with ctype.h, ensure logging works
* Add whitespace validation to ham mode to prevent validation bypass and to match python cli command
* punctuation change
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Don't use assert for Lock
* Don't use assert for MQTT messages
* Split assert in getMacAddr to always run the function
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Wipe keys if low entropy
* Client Notification Payload variant
* Don't call service before it's created
* Lucky Number 14
* Catch for low-entropy keys even before region is set
* Use BLE_LED where present for CONNECTED/DISCONNECTED
* Use WIFI_LED where present for WiFi started/stopped (as AP) or connected/disconnected (as Station)
* improve support for Heltec Wireless Bridge
* satisfy 'trunk fmt'
* Initial support for NomadStar Meteor Pro
* Cleaned up Platformio variant comments
* Removed RTC & ETH deps.
* Removed RGB NCP5623 deps, Enabled AmbientLight by default
* Added HWID mapping
* Updated Armduino-Semihosting lib dep with archived version.
* Fixed trunk linting in AmbientLightingThread.h and hydra variant
* Driver for WeAct Studio 2.9" ePaper module
* Clarify that flex connector marking is not a unique id
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* feat: seeed_xiao_nrf52840_kit improvements
- LEDs:
- Change RGB LED to be active low as it is common anode
- Remove re-definition of LED_PIN
- Use red LED to indicate flash writes
- Use blue LED as user LED (External Notification module)
- GPIO: Re-word unused BUTTON_PIN comment
- Wire: Set I2C pins to match XIAO nRF52840 Sense's LSM6DS3TR IMU
- Battery:
- Use charge LED to detect charging state
- Move voltage divider boilerplate out of src/main.cpp and into initVariant()
- Fix dependencies for above in related XIAO BLE DIY variants
Build tested variants:
- seeed_xiao_nrf52840_kit
- xiao_ble
- seeed-xiao-nrf52840-wio-sx1262
Flashed to and tested on hardware:
- seeed_xiao_nrf52840_kit
Signed-off-by: Andrew Yong <me@ndoo.sg>
* chore(seeed_xiao_nrf52840_kit): Re-order generic GPIO definitions
Signed-off-by: Andrew Yong <me@ndoo.sg>
* chore: Use ADC_CTRL for XIAO nRF52840
Signed-off-by: Andrew Yong <me@ndoo.sg>
---------
Signed-off-by: Andrew Yong <me@ndoo.sg>
* Added full support for LTR390UV readings of UV and Lux
* Trunk formatting
* Added full support for LTR390UV readings of UV and Lux
* Trunk formatting
* fix library check and unnecessary bit resolution change
* fixed log info messages and removed unused dependency
* Hopefully fixes git mess
* fix variable scope and getMetrics returns
* set metrics flags bavk to false in case something wrong happens while reading LTR390UV mode
---------
Co-authored-by: Domingo <domingo@waxman.local>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Coerce user.id to always be derive from the nodenum
* Additionally null it out on send
* Revert "Additionally null it out on send"
This reverts commit 22a2d68723.
* Add LINK32 (Lilygo) Board with Light+Environment sensors
TODO: replace PRIVATE_HW with actual HWID
* Add LINK32 (Lilygo) Board with Light+Environment sensors
TODO: replace PRIVATE_HW with actual HWID
* Update to real HWID and trunk fmt
This is an I2C temperature sensor. It is intended to be a drop-in
compatible sensor for the LM75, however it is more accurate.
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
- Rename REGULATORY_GAIN_LORA to TX_GAIN_LORA
- Move gain-based Tx power clamping from RadioInterface::applyModemConfig() to RadioInterface::limitPower()
- User-configured Tx power now matches the Tx power out of the device connector
- Re-order [LoRa Chip]Interface.cpp limitPower() to take place before the final Tx power clamping so we clamp based on the pre-PA Tx power rather than user-configured Tx power
Tested on XIAO BLE variant.
Signed-off-by: Andrew Yong <me@ndoo.sg>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
