* Show ExternalNotification as excluded if it is
* Enable ExternalNotification, SerialModule and RangeTest on STM32WL
* Misc fixes for #7797 - ARCH_STM32 -> ARCH_STM32WL, use less flash by dropping weather station support for serialmodule, set tx/rx pins before begin
* Enable Serial1 on RAK3172, make SerialModule use it (console is on LPUART1)
* Fix SerialModule on RAK3172, fix board definition of RAK3172 to include the right pin mapping.
* Hold for >20s after GPS lock
GPS chips are designed to stay locked for a while to download some data and save it.
This data is important for speeding up future locks, and making them higher quality.
Our present configuration could make every lock perform similar to first lock.
This patch sets a hold of between 20s and 10% of the lock search time after lock
is acquired. This should allow the GPS to finish its work before we turn it off.
Fixes https://github.com/meshtastic/firmware/issues/7466
* Remove T1000E-specific GPS holds
The new code does the same thing, for all devices.
* Fix publishing settings
* Cleanups, removing unused variables.
* ifdef log line with GPS_DEBUG
* fixQual is not a bool.
* Add BaseUI support for L1 EInk
* Fix Eink offset
* Add joystick
* Updates
* Adjust Seeed Wio Tracker L1 E-Ink variant (#7326)
* Rename variant
Needs the -inkhud suffix to work correctly with the web flasher
* Display driver for ZJY122250_0213BAAMFGN
* Remove dead code from nicheGraphics.h
Remnants of T-Echo's nicheGraphics.h file, which was used as a template.
* Use ZJY122250_0213BAAMFGN driver
Improves display health. We don't need as many full refreshes now.
* Tidying
* board_check = true
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Consolidation
* Add hack for existing InkHUD button functionality
---------
Co-authored-by: todd-herbert <herbert.todd@gmail.com>
* Initial support for the ThinkNode M5
* Update variants/esp32s3/ELECROW-ThinkNode-M5/platformio.ini
Co-authored-by: Austin <vidplace7@gmail.com>
* Cleanup variant.h for Elecrow Thinknode M5
* Properly detect battery voltage
* Turn backlight off when screen sleeps
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Austin <vidplace7@gmail.com>
* add new platform rak_wismeshtag
* Remove RTC and Ethernet definitions from variant.h
* Remove unused EINK and Ethernet definitions from variant.h and platformio.ini
* Add WISMESH_TAG hardware model definition in architecture.h and update build flags in platformio.ini
* Remove unused build flags and dependencies
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: daniel <daniel.cao@rakwireless.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
* Enable GPS for Wio-E5 variant on Serial2
* Add ability to override GPS serial port using GPS_SERIAL_PORT, and make RAK2560 use it.
* Don't try to send ATAK packets if ATAK is disabled, +4k flash
* docs(xiao_ble): Simplify building and flashing instructions
- **Update Bootloader** - deleted this section, as Meshtastic now builds-in a compatible SoftDevice
- **PlatformIO Environment Preparation** - deleted this section, as Meshtastic now builds-in a compatible SoftDevice
- **Build Meshtastic** - simplified it greatly by referring to Meshtastic documentation
- **Flash the firmware to the Xiao BLE** - simplified it greatly as Meshtastic now builds firmware.uf2; added some observations for a succesful flash
Light cleanup of Markdown and renumbering of sections.
Signed-off-by: Andrew Yong <me@ndoo.sg>
* docs(xiao_ble): Replace some HTML with Markdown, cleanup Markdown
Signed-off-by: Andrew Yong <me@ndoo.sg>
* docs(xiao_ble): Update SX126X_TXEN definition location
Signed-off-by: Andrew Yong <me@ndoo.sg>
* docs(xiao_ble): Fresher information about E22 modules
Signed-off-by: Andrew Yong <me@ndoo.sg>
* docs(xiao_ble): Instructions for E22...M33S modules
Also re-order the Build section to come after the Wiring section since the build instructions require special attention if the wiring/modules differ from the variant's expected pins/module.
Signed-off-by: Andrew Yong <me@ndoo.sg>
* docs(xiao_ble): Rename all XIAO BLE to XIAO nRF52840
Signed-off-by: Andrew Yong <me@ndoo.sg>
* docs(xiao_ble): Remove note about Linux since shell script is gone
Signed-off-by: Andrew Yong <me@ndoo.sg>
* docs(xiao_ble): trunk fmt and fix links
Signed-off-by: Andrew Yong <me@ndoo.sg>
---------
Signed-off-by: Andrew Yong <me@ndoo.sg>
These DIY builds are functionally similar to the legacy xiao_ble variant, but use a pinout harmonized with the officially-supported XIAO nRF52840 & Wio-SX1262 Kit for Meshtastic (SKU 102010710).
An additional E22-900M33S variant is provided to ensure SX1262 transmit power is set below the maximum PA input for that module, to avoid damaging it.
- seeed_xiao_nrf52840_e22_900m30s:
- XIAO nRF52840 + EBYTE E22-900M30S
- EBYTE E22 pinout matching Wio-SX1262 (SKU 113010003)
- I2C
- SDA: D6
- SCL: D7
- User button: D0
- Gain is programmed in firmware - user Tx power setting is the desired final output power
- seeed_xiao_nrf52840_e22_900m33s:
- XIAO nRF52840 + EBYTE E22-900M33S
- EBYTE E22 pinout matching Wio-SX1262 (SKU 113010003)
- I2C
- SDA: D6
- SCL: D7
- User button: D0
- Gain is programmed in firmware - user Tx power setting is the desired final output power
Signed-off-by: Andrew Yong <me@ndoo.sg>
The link to the product should point to the vendor's website, not a random distributor.
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Tests to identify display model
* (InkHUD) SSD1682 controller IC
Has a few quirks, gets its own base class
* (InkHUD) E0213A367 Display
For Heltec Wireless Paper V1.1.1, V1.2
For Heltec VM-E213 V1.1
* (InkHUD) Select display model at boot
* (BaseUI) Wrapper to combine multiple GxEPD2 drivers
Workaround for issue of GxEPD2_BW objects not having a shared base class. Allows us to select a driver at runtime.
https://github.com/meshtastic/firmware/issues/6851#issuecomment-2905353447
* (BaseUI) Select E-Ink model at boot
* (InkHUD) SSD1682 deep sleep
* (InkHUD) No deep sleep for SSD1682
* (InkHUD) Fully no-op deep sleep for SSD1682
* Initial work on splitting notification renderer into components for reuse
* More progress
* Fix notification popup
* more fix, less crash
* Adjustments for OLED on keeping menus tidy, added Bluetooth Toggle to Home frame. Also widen the frame slightly if you have a scroll bar
* Small changes for EInk to not crowd elements
* Change System frame menu over to better match actions; added color picker for T114
* Fix build errors and add T190 for testing
* Logic gates are hard sometimes
* Screen Color Picker changes, defined Yellow as a Color.
* Additional colors and tuning
* Abandon std::sort in NodeDB, and associated fixes (#7175)
* Generate short name for nodes that don't have user yet
* Add reboot menu
* Sort fixes
* noop sort option to avoid infinite loop
* Refactor Overlay Banner
* Continuing work on Color Picker
* Add BaseUI menus to add and remove Favorited Nodes
* Create TFT_MESH_OVERRIDE for variants.h and defined colors
* Trigger a NodeStatus update at the end of setup() to get fresh data on display at boot.
* T114 defaults to White, Yellow is now bright Yellow
* Revert "T114 defaults to White, Yellow is now bright Yellow"
This reverts commit 8d05e17f11.
* Only show OEM text if not OLED
* Adjust OEM logo to maximize visible area
* Start plumbing in Color Picker changes
* Finished plumbing
* Fix warning
* Revert "Fix warning"
This reverts commit 2e8aecd52d.
* Fix display not fully redrawing
* T-Deck should get color too
* Emote Revamp
* Update emotes.cpp
* Poo Emote fix
* Trunk fix
* Add secret test menu and number picker
* Missed bits
* Save colors between reboots
* Save Clock Face election to protobuf
* Make reboot first, then settings
* Add padding for single line pop-ups
* Compass saving and faster menus
* Resolve build issue with Excluding GPS
* Resolve issue with memory bars on EInk
* Add brightness settings for supported screen (#7182)
* Add brightness menu.
* add loop destination selection.
* Bring back color (and sanity) to the menus!
* Trunk
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jason P <applewiz@mac.com>
Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com>
Co-authored-by: Wilson <m.tools@qq.com>
* Add 12pt fonts
* Add fontMedium
In addition to fontSmall and fontLarge
* Set fonts in nicheGraphics.h
* Change all uses of fontLarge to fontMedium
fontLarge was previously set at 9pt. fontLarge is now 12pt, fontMedium is 9pt. (NB: fonts may be customized per-variant)
* Use fontLarge with "All Messages" and "DMs" applets
* Documentation
