rbxii3/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2025-12-20 17:52:35 +00:00
Code Issues Packages Projects Releases Wiki Activity
5,479 Commits 89 Branches 316 Tags
979d12d6076e5a80e3166952b3093c191aba71d9
Commit Graph

24 Commits

Author SHA1 Message Date
Thomas Göttgens
50a301899e start to sort radiolib out. If we have macros, use them! :-) 
Also we need Godmode for the SX1280 for now, hopefully can revert to more sane operation.
 2022-11-14 09:49:50 +01:00
Thomas Göttgens
f7b12f0695 Adapt to new protobufs - TODO: factory_reset rewire 2022-09-09 12:51:41 +02:00
Jm Casler
46e13d23d9 Add debug to monitor radio reconfiguration for #1014 - 2022-06-21 21:51:45 -07:00
Ben Meadors
0767c0b0e8 Converted to jgromes/RadioLib upstream and pegged to latest ref (#1472) 
* Converted to jgromes/RadioLib upstream and pegged to latest ref
 2022-05-29 19:30:20 -05:00
GUVWAF
6d01f9aa89 Add isChannelActive() function to radio interface 2022-04-20 20:04:44 +02:00
Jm Casler
ac8ba706f0 Add rssi meta data to the rf95 interface 2022-02-28 17:07:31 -08:00
Vladislav Osmanov
cb42440963 fix module frequency overriding 
The `RadioInterface::freq` member was encapsulated with the `RadioInterface::getFreq()` function,
which could be overridden in child classes for some LoRa-modules.
 2021-09-13 22:13:51 +03:00
Vladislav Osmanov
1a671f2877 override new RadioLib's default current limit value (60 mA) to the previous value of 100mA 2021-09-08 14:30:52 +03:00
Kevin Hester
17a1262382 pull in new epaper lib (which required importing configuration.h everywhere 
for dumb reasons)
 2021-06-27 10:56:28 -07:00
Kevin Hester
babc1b3613 include file/lineno in critical error logs 2021-04-29 09:52:15 +08:00
Kevin Hester
5fdcb72d46 cleanup applyModemConfig based on porduino testing, share with sim 2021-03-30 23:34:13 +08:00
Kevin Hester
5ceee50bb5 bug: we've always been setting gpio 0 as an input on rf95 based devices 
found because portduino provides full visibility to all IO operations
to the hw simulator.
 2021-01-02 11:23:18 +08:00
Kevin Hester
186a52172c fix #577 don't make invalid radio settings reboot the board 
instead raise a critical fault (note though: this is still not ideal
because the radio will be in an undefined state until valid settings
are used)
 2020-12-27 13:09:20 +08:00
Kevin Hester
7a4b8cde11 keep rf95 max power at 20 dBm so users don't smoke their boards 2020-10-08 10:51:31 +08:00
Kevin Hester
113859e791 increase sx1272 max power 
+#define MAX_POWER 27
 // if we use 20 we are limited to 1% duty cycle or hw might overheat.  For continuous operation set a limit of 17
+// In theory up to 27 dBm is possible, but the modules installed in most radios can cope with a max of 20.  So BIG WARNING
+// if you set power to something higher than 17 or 20 you might fry your board.
 2020-10-08 09:57:59 +08:00
Kevin Hester
7a5832ab8a SX1262: fix serious bug with detecting if we have a rx packet in progress 
Could cause hangs on the way into sleep (and enormous power consumption).
Instead of checking for rx packet length (which only changes at completion)
check if we've received preamble bits but haven't yet received a completed
packet interrupt.

notes:


wait to sleep loop problem
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
Can not send yet, busyRx
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0

vs normal run
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
Starting low level send (id=0x53fe1dd0 Fr0xe5 To0xff, WantAck0, HopLim3 encrypted)
Completed sending (id=0x53fe1dd0 Fr0xe5 To0xff, WantAck0, HopLim3 encrypted)
 2020-10-07 13:43:51 +08:00
geeksville
c6d93d1a28 fix #346 limit tx power in japan 2020-09-15 18:54:50 -07:00
geeksville
7d4058f49d let users set 20 dBm if they wish 2020-09-15 18:00:21 -07:00
geeksville
31fc8fafec make default power level radio chipset specific 2020-09-15 17:55:33 -07:00
geeksville
98dfecdb79 Add external RF switch management for RF95 (needed for RAK815) 2020-07-13 13:18:32 -07:00
geeksville
e12c057c31 RAK815 lora works 2020-07-10 14:37:01 -07:00
geeksville
79c61cf0e0 limit max power on rf95 to 17 (rather than 20, because 20 can... 
burn up parts if you exceed 1% duty cycle)
 2020-05-02 19:52:37 -07:00
geeksville
50213d8323 move packet handling into its own thread 2020-05-01 12:11:04 -07:00
geeksville
71fcdba017 cleanup directory structure 2020-05-01 09:04:00 -07:00