* Add missed include
* Another Warning fix
* Add another HAS_SCREEN
* Namespace fixes
* Removed depricated destination types and re-factored destination screen
* Get rid of Arduino Strings
* Clean up after Copilot
* SixthLine Def, Screen Rename
Added Sixth Line Definition Screen Rename, and Automatic Line Adjustment
* Consistency is hard - fixed "Sixth"
* System Frame Updates
Adjusted line construction to ensure we fit maximum content per screen.
* Fix up notifications
* Add a couple more ifdef HAS_SCREEN lines
* Add screen->isOverlayBannerShowing()
* Don't forget the invert!
* Adjust Nodelist Center Divider
Adjust Nodelist Center Divider
* Fix variable casting
* Fix entryText variable as empty before update to fix validation
* Altitude is int32_t
* Update PowerTelemetry to have correct data type
* Fix cppcheck warnings (#6945)
* Fix cppcheck warnings
* Adjust logic in Power.cpp for power sensor
---------
Co-authored-by: Jason P <applewiz@mac.com>
* More pixel wrangling so things line up NodeList edition
* Adjust NodeList alignments and plumb some background padding for a possible title fix
* Better alignment for banner notifications
* Move title into drawCommonHeader; initial screen tested
* Fonts make spacing items difficult
* Improved beeping booping and other buzzer based feedback (#6947)
* Improved beeping booping and other buzzer based feedback
* audible button feedback (#6949)
* Refactor
---------
Co-authored-by: todd-herbert <herbert.todd@gmail.com>
* Sandpapered the corners of the notification popup
* Finalize drawCommonHeader migration
* Update Title of Favorite Node Screens
* Update node metric alignment on LoRa screen
* Update the border for popups to separate it from background
* Update PaxcounterModule.cpp with CommonHeader
* Update WiFi screen with CommonHeader and related data reflow
* It was not, in fact, pointing up
* Fix build on wismeshtap
* T-deck trackball debounce
* Fix uptime on Device Focused page to actually detail
* Update Sys screen for new uptime, add label to Freq/Chan on LoRa
* Don't display DOP any longer, make Uptime consistent
* Revert Uptime change on Favorites, Apply to Device Focused
* Label the satelite number to avoid confusion
* Boop boop boop boop
* Correct GPS positioning and string consistency across strings for GPS
* Fix GPS text alignment
* Enable canned messages by default
* Don't wake screen on new nodes
* Cannedmessage list emote support added
* Fn+e emote picker for freetext screen
* Actually block CannedInput actions while display is shown
* Add selection menu to bannerOverlay
* Off by one
* Move to unified text layouts and spacing
* Still my Fav without an "e"
* Fully remove EVENT_NODEDB_UPDATED
* Simply LoRa screen
* Make some char pointers const to fix compilation on native targets
* Update drawCompassNorth to include radius
* Fix warning
* button thread cleanup
* Pull OneButton handling from PowerFSM and add MUI switch (#6973)
* Trunk
* Onebutton Menu Support
* Add temporary clock icon
* Add gps location to fsi
* Banner message state reset
* Cast to char to satisfy compiler
* Better fast handling of input during banner
* Fix warning
* Derp
* oops
* Update ref
* Wire buzzer_mode
* remove legacy string->print()
* Only init screen if one found
* Unsigned Char
* More buttonThread cleaning
* screen.cpp button handling cleanup
* The Great Event Rename of 2025
* Fix the Radiomaster
* Missed trackball type change
* Remove unused function
* Make ButtonThread an InputBroker
* Coffee hadn't kicked in yet
* Add clock icon for Navigation Bar
* Restore clock screen definition code - whoops
* ExternalNotifications now observe inputBroker
* Clock rework (#6992)
* Move Clock bits into ClockRenderer space
* Rework clock into all device navigation
* T-Watch Actually Builds Different
* Compile fix
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Add AM/PM to Digital Clock
* Flip Seconds and AM/PM on Clock Display
* Tik-tok pixels are hard
* Fix builds on Thinknode M1
* Check for GPS and don't crash
* Don't endif til the end
* Rework the OneButton thread to be much less of a mess. (#6997)
* Rework the OneButton thread to be much less of a mess. And break lots of targets temporarily
* Update src/input/ButtonThread.h
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* fix GPS toggle
* Send the shutdown event, not just the kbchar
* Honor the back button in a notificaiton popup
* Draw the right size box for popup with options
* Try to un-break all the things
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* 24-hour Clock Should have leading zero, but not 12-hour
* Fixup some compile errors
* Add intRoutine to ButtonThread init, to get more responsive user button back
* Add Timezone picker
* Fix Warning
* Optionally set the initial selection for the chooser popup
* Make back buttons work in canned messages
* Drop the wrapper classes
* LonPressTime now configurable
* Clock Frame can not longer be blank; just add valid time
* Back buttons everywhere!
* Key Verification confirm banner
* Make Elecrow M* top button a back button
* Add settings saves
* EInk responsiveness fixes
* Linux Input Fixes
* Add Native Trackball/Joystick support, and move UserButton to Input
* No Flight Stick Mode
* Send input event
* Add Channel Utilization to Device Focused frame
* Don't shift screens when we draw new ones
* Add showOverlayBanner arguments to no-op
* trunk
* Default Native trackball to NC
* Fix crash in simulator mode
* Add longLong button press
* Get the args right
* Adjust Bluetooth Pairing Screen to account for bottom navigation.
* Trackball everywhere, and unPhone buttons
* Remap visionmaster secondary button to TB_UP
* Kill ScanAndSelect
* trunk
* No longer need the canned messages input filter
* All Canned All the time
* Fix stm32 compile error regarding inputBroker
* Unify tft lineheights (#7033)
* Create variable line heights based upon SCREEN_HEIGHT
* Refactor textPositions into method -> getTextPositions
* Update SharedUIDisplay.h
---------
Co-authored-by: Jason P <applewiz@mac.com>
* Adjust top distance for larger displays
* Adjust icon sizes for larger displays
* Fix Paxcounter compile errors after code updates
* Pixel wrangling to make larger screens fit better
* Alert frame has precedence over banner -- for now
* Unify on ALT_BUTTON
* Align AM/PM to the digit, not the segment on larger displays
* Move some global pin defines into configuration.h
* Scaffolding for BMM150 9-axis gyro
* Alt button behavior
* Don't add the blank GPS frames without HAS_GPS
* EVENT_NODEDB_UPDATED has been retired
* Clean out LOG_WARN messages from debugging
* Add dismiss message function
* Minor buttonThread cleanup
* Add BMM150 support
* Clean up last warning from dev
* Simplify bmm150 init return logic
* Add option to reply to messages
* Add minimal menu upon selecting home screen
* Move Messages to slot 2, rename GPS to Position, move variables nearer functional usage in Screen.cpp
* Properly dismiss message
* T-Deck Trackball press is not user button
* Add select on favorite frame to launch cannedMessage DM
* Minor wording change
* Less capital letters
* Fix empty message check, time isn't reliable
* drop dead code
* Make UIRenderer a static class instead of namespace
* Fix the select on favorite
* Check if message is empty early and then 'return'
* Add kb_found, and show the option to launch freetype if appropriate
* Ignore impossible touchscreen touches
* Auto scroll fix
* Move linebreak after "from" for banners to maximize screen usage.
* Center "No messages to show" on Message frame
* Start consolidating buzzer behavior
* Fixed signed / unsigned warning
* Cast second parameter of max() to make some targets happy
* Cast kbchar to (char) to make arduino string happy
* Shorten the notice of "No messages"
* Add buzzer mode chooser
* Add regionPicker to Lora icon
* Reduce line spacing and reorder Position screen to resolve overlapping issues
* Update message titles, fix GPS icons, add Back options
* Leftover boops
* Remove chirp
* Make the region selection dismissable when a region is already set
* Add read-aloud functionality on messages w/ esp8266sam
* "Last Heard" is a better label
* tweak the beep
* 5 options
* properly tear down freetext upon cancel
* de-convelute canned messages just a bit
* Correct height of Mail icon in navigation bar
* Remove unused warning
* Consolidate time methods into TimeFormatters
* Oops
* Change LoRa Picker Cancel to Back
* Tweak selection characters on Banner
* Message render not scrolling on 5th line
* More fixes for message scrolling
* Remove the safety next on text overflow - we found that root cause
* Add pin definitions to fix compilation for obscure target
* Don't let the touchscreen send unitialized kbchar values
* Make virtual KB just a bit quicker
* No more double tap, swipe!
* Left is left, and Right is right
* Update horizontal lightning bolt design
* Move from solid to dashed separator for Message Frame
* Single emote feature fix
* Manually sort overlapping elements for now
* Freetext and clearer choices
* Fix ESP32 InkHUD builds on the unify-tft branch (#7087)
* Remove BaseUI branding
* Capitalization is fun
* Revert Meshtastic Boot Frame Changes
* Add ANZ_433 LoRa region to picker
* Update settings.json
---------
Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jason P <applewiz@mac.com>
Co-authored-by: todd-herbert <herbert.todd@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Initiate magenetometer based compass calibration from button presses
- only active for BMX160 accelerometers on RAK_4631
- replace automatic calibration on power on with button triggered
calibration
- set 5 presses to trigger 30s calibration
- set 6 presses to trigger 60s calibration (useful if unit is not
handheld, ie vehicle mounted)
- show calibration time remaining on calibration alert screen
* Fix non RAK 4631 builds
- exclude changes from non RAK 4631 builds
- remove calls to screen when not present
* Fix build on RAK4631_eth_gw
- exclude all compass heading updates on variant without screen
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* add canned message and keyboard in indicator board
* Added virtual keyboard macro and enabled for Indicator
* Cleanup macros by applying USE_VIRTUAL_KEYBOARD and DISPLAY_CLOCK_FRAME
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Added support for Polish OLED characters.
- Custom FONT_SMALL ArialMT_Plain_10_PL
- Automatic selection between Polish and Ukrainian/Russian characters mapping depending on the -D OLED_{LANG_NAME} flage
* Updated setFrames in Screen.cpp
Added code to attempt to revert back to the same frame that user was on prior to setFrame reload.
* Space added Screen.cpp
* Update Screen.cpp
Make screen to revert to Frame 0 if the originally displayed frame is no longer there.
* Update Screen.cpp
Inserted boolean holdPosition into setFrames to indicate the requirement to stay on the same frame ( if =true) or else it will switch to new frame .
Only Screen::handleStatusUpdate calls with setFrame(true). ( For Node Updates)
All other types of updates call as before setFrame(), so it will change focus as needed.
* Hold position, even if number of frames increases
* Hold position, if handling an outgoing text message
* Update Screen.cpp
* Reverted chnages related to devicestate.has_rx_text_message
* Reset to master
* CannedMessages only handles routing packets when waiting for ACK
Previously, this was calling Screen::setFrames at unexpected times
* Gather position info about screen frames while regenerating
* Make admin module observable
Notify only when relevant. Currently: only to handle remove_nodenum.
* Optionally specify which frame to focus when setFrames runs
* UIFrameEvent uses enum instead of multiple booleans
* Allow modules to request their own frame to be focussed
This is done internally by calling MeshModule::requestFocus()
Easier this way, insteady of passing the info in the UIFrameEvent:
* Modules don't always know whether they should be focussed until after the UIFrameEvent has been raised, in dramFrame
* Don't have to pass reference to module instance as parameter though several methods
* E-Ink screensaver uses FOCUS_PRESERVE
Previously, it had its own basic implementation of this.
* Spelling: regional variant
* trunk
* Fix HAS_SCREEN guarding
* More HAS_SCREEN guarding
---------
Co-authored-by: BIST <77391720+slash-bit@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: slash-bit <v-b2@live.com>
* Move waypoint screen draw into the waypoint module
* Get the observer set up for the waypoint screen draw
* Static squashing: screen dimensions
Macros moved back to Screen.cpp, as a band-aid until we eventually move all those static functions into the Screen class.
* Move getCompassDiam into Screen class
(supress compiler warnings)
At this stage, the method is still static, because it's used by drawNodeInfo, which has no tidy reference to our screen instance.
This is probably just another band-aid until these static functions all move.
* Use new getCompassDiam function in AccelerometerThread
* Properly gate display code in WaypointModule
---------
Co-authored-by: Todd Herbert <herbert.todd@gmail.com>
* Move static functions into Screen.h, show compass during calibration
* Move to _fontHeight macro to avoid collision
* Move some alert functions to new alert handler
* Catch missed reboot code
* ESP32 fixes
* Bump esp8266-oled-ssd1306
* Fixes for when a device has no screen
* Use new startAlert(char*) helper class
* Add EINK bits back to alert handling
* Add noop class for no-display devices
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Updated kbI2cBase.cpp
Updated keyboard settings for t-deck to allow a modifier key to trigger 'tab', mute notifications, or quit. To trigger the modifier press the shift key and mic (0) button at the same time. Then press q (quit), m (mute), or t (tab).
* Update kbI2cBase.cpp
* fixed formatting issues in kbI2cBase.cpp
* Removed keyboard shortcut code that doesnt work
alt+t does not work on a t-deck so I removed it to avoid confusion.
* Updated kbI2cBase.cpp
Updated keyboard settings for t-deck to allow a modifier key to trigger 'tab', mute notifications, or quit. To trigger the modifier press the shift key and mic (0) button at the same time. Then press q (quit), m (mute), or t (tab).
* Update kbI2cBase.cpp
* fixed formatting issues in kbI2cBase.cpp
* Removed keyboard shortcut code that doesnt work
alt+t does not work on a t-deck so I removed it to avoid confusion.
* Changed modifier key to alt+c
* Added screen brightness functionality
Use modifier key with o(+) to increase brightness or i(-) to decrease.
Currently there are 4 levels of brightness, (L, ML, MH, H). I would like to add a popup message to tell you the brightness.
* Added checks to disable screen brightness changes on unsupported hardware
* Setting the brightness code to work on only applicable devices
* Added "function symbol" display to bottom right corner of screen. Now shows when mute is active or modifier key is pressed. Also fixed some other minor issues.
* commented out a log
* Reworked how modifier functions worked, added
I wasn’t happy with my previous implementation, and I think it would have caused issues with other devices. This should work on all devices.
* Added back the function I moved causing issue with versions
* Fixed the version conflicts, everything seems to work fine now
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
* Update E-Ink display after sending adhoc ping or disable/enable GPS
* Resume display updates when touch button pressed
* Use touch hold as modifier; change double-click behavior for user button
* Fix preprocessor exclusions
* Purge backlight behavior
* Distinguish between 3x and 4x multi-presses
* Touch button considers "Wake screen on tap or motion" user-setting
* Don't assume device has BUTTON_PIN
* Rename misleading method
* remove redundant logic
* Handle special screens for old EInkDisplayClass
* Handle special screens for EInkDynamicDisplay class
* Join an async refresh in progress to avoid skipping screensaver
* attempt trunk fix
* fix Wireless Paper double-clear screen at boot
* log when flooded with "responsive" frames
* show the "resuming" screen when waking from deep-sleep
* rename drawDeepSleepScreen
avoid future confusion with "Screen Paused" screen
* show a screensaver frame when screen off
The frame shown during deep sleep is now also passed through showScreensaverFrames()
* Add macros for E-Ink color values.
OLEDDISPLAY_COLOR is inverted. Result of light-mode on E-Ink vs dark-mode on OLED?
* adapt drawDeepSleepScreen to new screensaver convention
* Mark Wireless Paper V1.1 as having problems with ghosting
Any other issues can be marked in a similar way, then handled in code where relevant
* Change screensaver from fullscreen logo to overlay
* identify "quirks" rather than "problems"
* move async refresh polling from display() to a NotifiedWorkerThread
* Prevent skipping of deep-sleep screen
(Hopefully)
* Redesign screensaver overlay
Now displays short name
* Optimize refresh for different displays
* Support older EInkDisplay class
* Don't assume text alignment
* fix spelling of a quirk macro
(No impact to code, but avoids future issues)
* Handle impossibly unlikely millis() overflow error
Should have just let it go, but here we are..
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add MaxNodes to Native
* It compiles...
* Convert nodedb to use new
* Closer but still broken.
* Finally working
* Remove unintended lines
* Don't include a pointer
* Capitalization matters.
* avoid rename in protocol regen
* When trimming the nodeDB, start with a cleanup
* Remove extra cleanupMeshDB() call for now
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add support for the rak10701 board, no touch
* Moved tftblack fillin and changed teh src flags
* Added rak10701 to platformio.ini
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Refactor away some duplication
* Refactor preset names to display formatter method
* Remove unused screen brightness adjustment and extract wifi disconnect reason name to display formatter method
* Tronk
* Let's be more clear with this naming
* Effed
* DisplayFormatters static class and use native wifi disconnect reason names method
* git mv file so casing should match now
* Include titlecase
* Trunk
* T-Watch WIP
* Updates
* Temp
* Update screen spi bus and and backlight en
* Peripherals progress
* Fixes
* Fixes
* Updates
* DRV scaffolding
* Fixed touch-screen driver selection. WIP on DRV haptic feedback
* DRV2605 pmu channel
* Trunk
* Fixes and defaults
* Dropped an s
* Move PMU and turn off screen that way
* Add t-deck and t-watch-s3 to CI and cleanup
* More cleanup
* add hwid for auto-detection
* fix: heltec-wireless-tracker USB serial
* T-Deck support
* trunk fmt
* set FRAMERATE to 1
* fix some defines
* trunk fmt
* corrected vendor link
* Break i2cScan out into a set of classes for scanning i2c
* refactor i2cscan addresses to be structs that allow addressing by port + address
* build whoopsies
* trunk fmt
* trunk fmt
* lost some build fixes from the merge
* more cleaning for build safety, RTC behavior
