rbxii3/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2025-12-22 10:42:49 +00:00
Code Issues Packages Projects Releases Wiki Activity
10,825 Commits 93 Branches 317 Tags
7cb7a6cd3ee7705dcf9eb1ba881beb8fd5d2bc2f
Commit Graph

52 Commits

Author SHA1 Message Date
Jonathan Bennett
654abe5b2c Add support for muzi-base (#8753) 2025-11-25 18:28:06 -06:00
Jonathan Bennett
0336331411 Use LED_CHARGE and LED_PAIRING for M6 led control (#8742) 2025-11-25 09:29:35 +01:00
Jonathan Bennett
ed4a798c60 Thinknode M3 support against master (#8630) 
* Add variant_shutdown() as a week function in main-nrf52.cpp

* Add Status LED module

* Add Thinknode M3 support

* Catch case of BLE disabled

* Update src/modules/StatusLEDModule.cpp

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* Update src/modules/StatusLEDModule.cpp

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* Update variants/nrf52840/ELECROW-ThinkNode-M3/rfswitch.h

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* Remove unused pin

* M3 pairing LED only active for 30 seconds after state change

* Thinknode M3 shutdown work

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
 2025-11-24 16:35:54 -06:00
simon-muzi
1bfa9ed4c4 Tweak OCV_ARRAY 100% voltage to take into account charger hysteresis and voltage sag after charge (#8720) 
Measured voltage of fully charged battery after a few minutes of rest
 2025-11-22 16:35:10 -06:00
simon-muzi
f4e260e0f1 R1 Neo - Added OCV_ARRAY from measured discharge curve testing + update ADC multiplier (#8716) 
* Added OCV_ARRAY from measured discharge curve testing and update ADC multiplier

The ADC resistor divider ratio is 0.6 -> multiplier should be 1/0.6 ~=1.667

We data logged a full discharge curve at constant 100mA draw over 15hours to get a realistic voltage curve for battery SoC measurements.

* Remove power.h in favor of variant.h

---------

Co-authored-by: Jason P <applewiz@mac.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
 2025-11-22 13:54:10 -06:00
Thomas Göttgens
d743ba8e75 Add Thinknode M6 2025-11-21 10:14:06 +01:00
viric
d18f3f7a65 Allow deepsleep in rak4630 and make it restart well when power comes back (#7882) 
* Make RAK4631 nodes power back on deep sleep

The devices will hang if the VBAT goes under 1.7V (Brown-out reset) and
they will never come back unless power supply goes completely off.

This kills unattended nodes.

Using the SystemOff the LPCOMP we can get the nodes back again when
power comes back, even if VBAT goes under 1.7V, which moreover is more
unlikely because the device is off.

* Adding support for heltec t114

And moved particularities to variant.h

* Remove old cpp comment that belongs to variant.h

It was a leftover.

* Trunk fix

---------

Co-authored-by: Tom Fifield <tom@tomfifield.net>
 2025-11-18 11:23:39 -06:00
Tom
36c2178570 Update to Pro-micro variants (#8600) 
* Update to Pro-micro variants

Schematic updated
Xtal variant removed
Extra module added to list
Extra explanation added to readme.

* Fix markdown formatting in readme.md

* Fix formatting in readme.md for RF switch section

---------

Co-authored-by: Tom <116762865+Nestpebble@users.noreply.github.com>
 2025-11-09 09:24:03 -06:00
shortwavesurfer2009
17324fa725 adjust battery curve (#8137) 
Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com>
 2025-11-01 09:39:30 +11:00
Tom Fifield
0283e0658b Master --> develop (#8394) 
* Update exempt labels for stale bot workflow

Adds triaged and backlog to the list of exempt labels.

* Update meshtastic/web to v2.6.7 (#8381)

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>

* Update DFRobot_RTU to v1.0.6 (#8387)

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>

* Update mcr.microsoft.com/devcontainers/cpp Docker tag to v2 (#8375)

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>

* manual merge stale bot config (#8392)

* Board support:  RAK3401+RAK13302 1-watt  (#8140)

* Add RAK3401 variant files

* Add SPI configuration for RAK3401 and RAK13302 variants

* Refactor SPI pin configuration and clean up variant definitions for RAK3401

* Add TX_GAIN_LORA for RAK13302 Power Amp

* Fix merge

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>

---------

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Co-authored-by: Daniel.Cao <144674500+DanielCao0@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>
 2025-10-19 08:54:56 +11:00
Jason P
37a0f774a2 Fix multitude of warnings during builds (#8331) 2025-10-13 12:51:27 -05:00
Jonathan Bennett
464663b496 GPS_POWER_TOGGLE no longer has a function, so purge (#8312) 2025-10-12 05:33:34 -05:00
GUVWAF
888692a373 Add dropped packet count to LocalStats (#8207) 
* Add dropped packet count to LocalStats
In case the transmit queue was full

* Trunked

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2025-10-04 08:13:58 -05:00
Szetya
1b97cf57ad Correcting GPS PINs (#8087) 
https://github.com/meshtastic/firmware/issues/8084

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2025-10-04 05:44:47 -05:00
Austin
0c2283e19e GAT562: Use PRIVATE_HW (fix build) (#8198) 2025-10-03 16:48:21 -05:00
rcarteraz
17afdb9ccf no more t-rex 2025-10-01 13:32:44 -05:00
Jonathan Bennett
ad44940732 Put the GPIO in the right state for wake from sleep 2025-10-01 13:32:44 -05:00
Jonathan Bennett
8b466b1db3 T-rex comment cleanup 2025-10-01 13:32:44 -05:00
Jonathan Bennett
f9937967fa Add HardwareModel and correct directories 2025-10-01 13:32:44 -05:00
WillyJL
47a82bdb98 Fix duplicated lines from merge (#8104) 2025-09-24 16:36:14 -05:00
Ben Meadors
371313080b Merge branch 'master' into develop 2025-09-24 06:18:13 -05:00
Ben Meadors
db55d8a59d Trunk 2025-09-24 06:16:51 -05:00
Quency-D
949f881ae8 Add three expansion screens for heltec mesh solar. (#7995) 
* Add three expansion screens for heltec mesh solar.

* delete whitespace

Update variants/nrf52840/heltec_mesh_solar/variant.h

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* delete whitespace

Update variants/nrf52840/heltec_mesh_solar/platformio.ini

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

---------

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2025-09-24 06:16:51 -05:00
Quency-D
c33c368315 Add three expansion screens for heltec mesh solar. (#7995) 
* Add three expansion screens for heltec mesh solar.

* delete whitespace

Update variants/nrf52840/heltec_mesh_solar/variant.h

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* delete whitespace

Update variants/nrf52840/heltec_mesh_solar/platformio.ini

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

---------

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2025-09-24 06:14:24 -05:00
Tom
d1fd102952 Add another seeed_xiao_nrf52840_kit build environment for I2C pinout (#8036) 
* Update platformio.ini

* Remove some more extraneous lines
 2025-09-21 06:28:28 -05:00
Tom
5701755608 Add another seeed_xiao_nrf52840_kit build environment for I2C pinout (#8036) 
* Update platformio.ini

* Remove some more extraneous lines
 2025-09-21 06:27:39 -05:00
Ben Meadors
1643249db7 Revert "Remove board_level from Meshtiny. (#7933)" (#7935) 
This reverts commit 2191fe465c.
 2025-09-09 05:48:05 -05:00
Wilson
2191fe465c Remove board_level from Meshtiny. (#7933) 2025-09-09 14:20:24 +08:00
Tom Fifield
227d0fa7dc Merge pull request #7862 from meshtastic/master 
Backmerge from Master into develop
 2025-09-08 11:23:22 +10:00
HarukiToreda
37d14f942e Reverting changes made by PR #7520 and adjusting ADC (#7878) 
* ADC value adjustment for T114
 2025-09-06 06:26:08 -05:00
HarukiToreda
e7b7479589 Reverting changes made by PR #7520 and adjusting ADC (#7878) 
* ADC value adjustment for T114
 2025-09-06 19:14:26 +10:00
Ben Meadors
68f07c5f9d Board extras 2025-09-04 18:39:02 -05:00
Jonathan Bennett
09a0df3a1f Enable bmx160 on native (#7844) 2025-09-04 06:24:04 -05:00
Jonathan Bennett
cc37535b2d Enable bmx160 on native (#7844) 2025-09-04 06:16:38 -05:00
Ben Meadors
3b82d55176 Revert "Add gat562_mesh_tracker_pro device. (#7815)" (#7824) 
This reverts commit 7d1300ab66.
 2025-09-02 06:17:01 -05:00
Tom Fifield
a6b8202cd4 Hold for 20s after GPS lock (#7801) 
* Hold for >20s after GPS lock

GPS chips are designed to stay locked for a while to download some data and save it.
This data is important for speeding up future locks, and making them higher quality.
Our present configuration could make every lock perform similar to first lock.

This patch sets a hold of between 20s and 10% of the lock search time after lock
is acquired. This should allow the GPS to finish its work before we turn it off.

Fixes https://github.com/meshtastic/firmware/issues/7466

* Remove T1000E-specific GPS holds

The new code does the same thing, for all devices.

* Fix publishing settings

* Cleanups, removing unused variables.

* ifdef log line with GPS_DEBUG

* fixQual is not a bool.
 2025-09-02 06:06:06 -05:00
Tom Fifield
c5fad6cca1 Hold for 20s after GPS lock (#7801) 
* Hold for >20s after GPS lock

GPS chips are designed to stay locked for a while to download some data and save it.
This data is important for speeding up future locks, and making them higher quality.
Our present configuration could make every lock perform similar to first lock.

This patch sets a hold of between 20s and 10% of the lock search time after lock
is acquired. This should allow the GPS to finish its work before we turn it off.

Fixes https://github.com/meshtastic/firmware/issues/7466

* Remove T1000E-specific GPS holds

The new code does the same thing, for all devices.

* Fix publishing settings

* Cleanups, removing unused variables.

* ifdef log line with GPS_DEBUG

* fixQual is not a bool.
 2025-09-02 06:05:14 -05:00
Wilson
7d1300ab66 Add gat562_mesh_tracker_pro device. (#7815) 2025-09-02 13:06:24 +08:00
Onyx Clawe
102c447fe3 Update variant.h (#7520) 
Updated ADC, Full charge now results in 100% charge being reported instead of 95% charge

Co-authored-by: OnyxtheDragon <58921814+OnyxtheDragon@users.noreply.github.com>
 2025-09-02 14:31:41 +10:00
Onyx Clawe
edeb25cab5 Update variant.h (#7520) 
Updated ADC, Full charge now results in 100% charge being reported instead of 95% charge

Co-authored-by: OnyxtheDragon <58921814+OnyxtheDragon@users.noreply.github.com>
 2025-09-01 07:57:15 -05:00
Wilson
4a669032dc Change user button to cancel button on meshtiny. (#7789) 2025-08-30 08:37:18 +08:00
Ben Meadors
0903ed8232 Mesh solar integrate (#7764) 
* Added HELTEC MeshSolar board. (#7499)

* Added HELTEC MeshSolar board.

* Set emergency shutdown pin as high impedance

* Set emergency shutdown pin as high impedance

Set emergency shutdown pin as high impedance

* Update variants/nrf52840/heltec_mesh_solar/variant.h

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* Update variants/nrf52840/heltec_mesh_solar/variant.h

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* Update variants/nrf52840/heltec_mesh_solar/variant.h

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* Update I2C SCL pin definition in variant.h

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* Updates

---------

Co-authored-by: Quency-D <55523105+Quency-D@users.noreply.github.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
 2025-08-27 06:02:54 -05:00
Ben Meadors
f8ba392a24 Add BaseUI support for L1 EInk (#7751) 
* Add BaseUI support for L1 EInk

* Fix Eink offset

* Add joystick

* Updates

* Adjust Seeed Wio Tracker L1 E-Ink variant (#7326)

* Rename variant
Needs the -inkhud suffix to work correctly with the web flasher

* Display driver for ZJY122250_0213BAAMFGN

* Remove dead code from nicheGraphics.h
Remnants of T-Echo's nicheGraphics.h file, which was used as a template.

* Use ZJY122250_0213BAAMFGN driver
Improves display health. We don't need as many full refreshes now.

* Tidying

* board_check = true

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

* Consolidation

* Add hack for existing InkHUD button functionality

---------

Co-authored-by: todd-herbert <herbert.todd@gmail.com>
 2025-08-26 20:29:11 -05:00
Wilson
f413c49555 Add Meshtiny device (#7676) 
* Add Meshtiny device - nRF52 OLED upDown encoder

* Update platformio.ini

* Update platformio.ini

* Add GPS Exclude to Meshtiny.

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2025-08-20 11:52:10 +08:00
Thomas Göttgens
9feb1d378e Support for T-Echo Lite, credits to @Szetya for doing all the heavy lifting! (#7636) 
* Support for T-Echo Lite, credts to @Szetya for doing all the heavy lifting!
* move define to ini file
 2025-08-17 13:37:12 +02:00
Ben Meadors
a02017a5c8 Remove JSON serialization from most NRF52 targets (#7640) 
* Remove JSON serialization from most NRF52 targets

* Slin networking base down for NRF52 by removing syslog

* Update platformio.ini
 2025-08-15 19:45:41 -05:00
Ben Meadors
88655ffc44 Move BLE toggle menu option and add confirmation for canned messages in L1 (#7516) 
* Move bluetooth to system menu and add confirmation for canned messages

* Cruft

* Handle else

* Warn

* Fixed screen reset
 2025-07-31 07:34:41 -05:00
Thomas Göttgens
608fdc6f52 Santa may be checking his list twice, but we only need this in the platformio.ini (#7490) 2025-07-28 09:47:46 -05:00
Iris
fc1e6ccb8c Rename Platformio.ini to platformio.ini (#7468) 2025-07-26 05:13:02 -05:00
Iris
bbc638ab82 Create Platformio.ini (#7450) 2025-07-25 15:36:37 -05:00