* Show ExternalNotification as excluded if it is
* Enable ExternalNotification, SerialModule and RangeTest on STM32WL
* Misc fixes for #7797 - ARCH_STM32 -> ARCH_STM32WL, use less flash by dropping weather station support for serialmodule, set tx/rx pins before begin
* Enable Serial1 on RAK3172, make SerialModule use it (console is on LPUART1)
* Fix SerialModule on RAK3172, fix board definition of RAK3172 to include the right pin mapping.
* Only send Neighbours if we have some to send.
The original intent of NeighborInfo was that when a NeighbourInfo
was sent all of the nodes that saw it would reply with NeighbourInfo.
So, NeighbourInfo was sent even if there were no hop-zero nodes in
the NodeDB.
Since 2023, when this was implemented, our understanding of running city-wide
meshes has improved substantially. We have taken steps to reduce the impact
of NeighborInfo over LoRa.
This change aligns with those ideas: we will now only send NeighborInfo
if we have some neighbors to contribute.
The impact of this change is that a node must first see another directly
connected node in another packet type before NeighborInfo is sent. This means
that a node with no neighbors is no longer able to trigger other nodes
to broadcast NeighborInfo. It will, however, receive the regular periodic
broadcast of NeighborInfo, and will be able to send NeighborInfo if it
has at least 1 neighbor.
* Include all the things
* AvOid memleak
* Add on-screen keyboard implementation on Wio Tracker L1.
* Update On-Screen Keyboard to new layout.
* The on-screen keyboard dynamically adjusts the key size based on the screen.
* Improve input box display on small screens.
* Optimize the virtual keyboard layout and cursor movement logic, and adjust the keyboard starting position for small and wide screens.
* Optimize the text alignment of numeric keys on ssd1306.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Initial support for the ThinkNode M5
* Update variants/esp32s3/ELECROW-ThinkNode-M5/platformio.ini
Co-authored-by: Austin <vidplace7@gmail.com>
* Cleanup variant.h for Elecrow Thinknode M5
* Properly detect battery voltage
* Turn backlight off when screen sleeps
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Austin <vidplace7@gmail.com>
* feat: event mode - limit smart position updates to at most every 5m
* fix: convert 600 to 600000ms for 5min threshold
* fix: correct 5min threshold to 300000ms
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* T-watch screen misalignment fix
* Trunk fix
* Rember Last Receipient Node or channel
When a new freetext or preset message is sent and a destination is selected, the next message would forget the previously selected destination and would need to be selected again. With this fix it will remember the last destination selected until changed again.
* Fix for reply function to remember last messaged
* trunk check
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Jason P <applewiz@mac.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* treewide: make 'ifdef DEBUG_PORT' guards also take into account DEBUG_MUTE
* stm32wl: Add a guard against having debug prints turned on without PIO_FRAMEWORK_ARDUINO_NANOLIB_FLOAT_PRINTF defined
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Clear position on GPS deactivation, unless using fixed position
As reported by @dreimal8 , and confirmed by @tuxmobil , when using
and then subsequently disabling GPS the last position retrieved from
the GPS was stored and continued to be broadcast.
This change introduces a check to see if we are transitioning from
GPS Enabled to GPS Disabled or Not Present. If we are, and fixed
position is not in use, then we clear the local position.
This will prevent inaccurate and undesired position broadcasts for those
who disable their GPS.
Fixes https://github.com/meshtastic/firmware/issues/7228
* Update triple click to also clear position
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add TraceRoute function to menus and modules to support node path tracing
* Adjust text spacing and line wrapping logic in trace route result result.
* Add HAS_SCREEN for TraceRouteModule drawFrame.
---------
Co-authored-by: Tom Fifield <tom@tomfifield.net>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Unify the shutdown proceedure
* Don't double save nodeDB on shutdown
* Re-tool button shutdown to better correspond to tones
* Beep then save
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Calculate the length of the right string and use it
* Improve readability of Version Number
* Prevent negative message IDs and proactively favorite DM'd nodes
* Patch up Remove Favorite functionality
* Fix warnings for TFT_MESH_* and hasSupportBrightness
* Fix warning around casting variables
* Correct Favorite Node Behavior to rebuild favorite nodes when updated.
* Resolve bool kb_found issue not working for second discovery keyboards
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Enable GPS for Wio-E5 variant on Serial2
* Add ability to override GPS serial port using GPS_SERIAL_PORT, and make RAK2560 use it.
* Don't try to send ATAK packets if ATAK is disabled, +4k flash
* No delay between UI frame rendering for OLED
* force redraw the display
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jason P <applewiz@mac.com>
* feat(display): enable screen wake on received messages
* feat(menu): add Screen Wakeup option in system menu
* feat(ui): update wake on message configuration and refactor save logic
* feat(TextMessageModule): conditionally trigger screen wake on received message
* Refactoring system menu options for notification and screen.
* Fix MUI options in the system menu.
* Build out Reboot/Shutdown Menu and consolidate options within it
* Trunk fixes
* Protobuf ref
* Revert generated files
* Update plumbing for screen_wakeup_menu
* Begin work on crafting a method to stop screen wake for received messages
* SharedUIDisplay.cpp doesn't need ExternalNotificationModule.h
* Stop screen wake if External Notification is enabled
* Removing extra log lines
* Add role and battery state checks for not waking screen. Menu updates to resolve some Back options not being linked
* Resolve some additional merge conflict related issues
* Shouldn't throttle the power menu
* Finalize renames of some menus
* Flip Flop MUI Menu to avoid accidental clicks
* NULL check for powerStatus
* Remove "Wakeup" eNum
* Update src/graphics/Screen.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* CoPilot was close this should fix the builds
---------
Co-authored-by: whywilson <m.tools@qq.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
