* Unify uptime formatting
* Fix small label alignment item
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jason P <applewiz@mac.com>
* nrf52: add watchdog
Main thread only for now.
* bump framework-arduinoadafruitnrf52 to pick up new wdt support
* clang-format the new parts of main-nrf52.cpp
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
(cherry picked from commit 83954293d8)
* Make RAK4631 nodes power back on deep sleep
The devices will hang if the VBAT goes under 1.7V (Brown-out reset) and
they will never come back unless power supply goes completely off.
This kills unattended nodes.
Using the SystemOff the LPCOMP we can get the nodes back again when
power comes back, even if VBAT goes under 1.7V, which moreover is more
unlikely because the device is off.
* Adding support for heltec t114
And moved particularities to variant.h
* Remove old cpp comment that belongs to variant.h
It was a leftover.
* Trunk fix
---------
Co-authored-by: Tom Fifield <tom@tomfifield.net>
* Update to Pro-micro variants
Schematic updated
Xtal variant removed
Extra module added to list
Extra explanation added to readme.
* Fix markdown formatting in readme.md
* Fix formatting in readme.md for RF switch section
---------
Co-authored-by: Tom <116762865+Nestpebble@users.noreply.github.com>
* Add the Heltec v4 expansion box.
* Change heltec-v4-oled to heltec-v4.
* Add touchscreen to I2C scanning.
* Add reset and busy pins to the ST7789.
* Ignore the touch interrupt pin and extend the sleep time to 1 hour.
* Remove the default sleep function.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add API types, state, and log message in Debug screen
* un-goober the API state tracking
* Set the SerialConsole api_type
* Add api_type for Ethernet
* Remove API state debugging code
* Update wording for client connection states
* Improve string width for smaller screen devices
* Reserve space on navigation bar to fit link indicator
* Add persistent Connected icon to screen
* Connect System frame to ensure text doesn't overflow
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jason P <applewiz@mac.com>
Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com>
* Properly format timestamp in log message
* Better formatting of GPS_DEBUG logging in gps probe
* Reset GPS after serial speed change, and look for magic string to identify chip
* Add UC6580 to boot message detection, for Heltec Tracker
* Add L76K detect from boot string, for Heltec-v4
* Slightly more useful GPS debugging
* Back out detection of L76K via startup messages.
* Ignore PIN_GPS_RESET = -1 and rename passive_detect array.
---------
Co-authored-by: Tom Fifield <tom@tomfifield.net>
* Update digital clock draw to auto scale to correct size; no more fixed scaling
* Static scale calcuation to improve performance
* Update src/graphics/draw/ClockRenderer.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Back off for width or height exceeds
* Fixes for some calcuations
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* full thing. works
* works
* minimal changes
* roll back previous changes, move to using the alloc() overrride
* clean up comments
* format
* run clang-format manually.
Trunk may be the absolute worst formatter in existance
* format on WSL to fix trunks awfulness
* add a 3 minute cooldown to prevent messages going back and forth
* add ignoring the dummy neighbor.
* fix or.
* fix spelling, increase logging
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Update to Pro-micro variants
Schematic updated
Xtal variant removed
Extra module added to list
Extra explanation added to readme.
* Fix markdown formatting in readme.md
* Fix formatting in readme.md for RF switch section
---------
Co-authored-by: Tom <116762865+Nestpebble@users.noreply.github.com>
* Add the Heltec v4 expansion box.
* Change heltec-v4-oled to heltec-v4.
* Add touchscreen to I2C scanning.
* Add reset and busy pins to the ST7789.
* Ignore the touch interrupt pin and extend the sleep time to 1 hour.
* Remove the default sleep function.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add the Heltec v4 expansion box.
* Change heltec-v4-oled to heltec-v4.
* Add touchscreen to I2C scanning.
* Add reset and busy pins to the ST7789.
* Ignore the touch interrupt pin and extend the sleep time to 1 hour.
* Remove the default sleep function.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add API types, state, and log message in Debug screen
* un-goober the API state tracking
* Set the SerialConsole api_type
* Add api_type for Ethernet
* Remove API state debugging code
* Update wording for client connection states
* Improve string width for smaller screen devices
* Reserve space on navigation bar to fit link indicator
* Add persistent Connected icon to screen
* Connect System frame to ensure text doesn't overflow
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jason P <applewiz@mac.com>
Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com>
