* Add support for MeshLink
* Updated, enabled watchdog and added button definition
* added eink variant and removed some compile errors
* Small board json file edit
* Finally got trunk working (somehow?), this is just cleanup with trunk fmt
* Various improvements and cleanup. Removed the use of PIN_3V3_En and defined a specific WD_EN pin instead for better clarity. Will do a bit more testing asap to make sure everything still works as intended :)
* Enable on-board QSPI Flash
* run trunk fmt with clang-format
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Austin <vidplace7@gmail.com>
* add readme and update rfswitch
* Updated readme to include all data from Ebyte
* Added results from switch testing & notes thereon
* fixed picture
* Whoops!
Forgot to uncomment some settings from test.
* Update readme.md
* Delete variants/diy/nrf52_promicro_diy_tcxo/E80_RSSI_per_case.png
* Add webp image to appease trunk
* Update readme.md
* Trunky trunk trunk
* Clang and the trunk is done
* * Update RAK9154 sensor to tx remote power telemetry
* remove uf2 script, pio run does that inline
* move sensor module to correct position
* disable LED and Accelerometer code on rak2560
* trunk fmt
* mention epaper variant
* attention, revert, revert
* Enable Environment Telemetry of these values
* fix float values
* [WIP] Attempt upgrade to LovyanGFX 1.1.16
This is the version most used by the TFT branch.
I wonder if this will work with our existing code? :)
* Update Portduino to LovyanGFX 1.20.0
Manuel says it's good to go.
* Update unPhone platformio.ini
---------
Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>
* I only have the V2.1 version, not sure if
the HW is same with V1, or V2. Given the few
resources I could find I think it is.
* ADC / Battery measure and TX/RX are working
* First attempt to adding hardware support for NRF52 SPI SD Card using arduino SD library
My first time contributing to an open source project so not very confident in what i'm doing.
Changes to
FSCommon:
initializing SD library for NRF52. Progress: No compile error, but SD card does not get initialized properly yet
added ifdef ARCH_ESP32 conditions around esp32 SD library functions
memget: added ifdef conditional statements
StoreForwardModule.cpp: added ifdef conditional statements
Rak4631 platfromIO.ini and variant.h:
added arduino-libraries/SD@^1.3.0 library to libdeps
defined HAS_SDCARD and SPI pins
Arduino SD library. Made changes to library because using namespace SDLIB in header file caused ambiguity problems
Not sure this is the right way of adding a library, also, how do i implement changes to the library permanently to the project?
Am I going somewhat in the right direction with these changes? Tell me your thoughts, thanks
* replaced arduino SD library to custom fork.
A "using namespace" statement in the header file was to messy to work around.
NRF52 SD card initialisation added
* updated library reference
added card size and type function to SD library
added populateSDCard for NRF52
* Changed NRF52 SD object from SDFilesystem to SD
Changed NRF52 SD object from SDFilesystem to SD for more compatibility with esp32 SD library. Some functions are still different but most used open, read, write and close are the same.
* Removed duplicate ESP32/NRF52 SD card access code
Mainly made changes to the custom arduino SD library to make it compatible with the esp32 SD library already used in the store and forward code.
With these compatible function names and return, I removed some duplicate code.
* trunk fmt and pin SD library to commit hash
* print this out on ESP32 anyway
---------
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
* add more locking for shared SPI devices (#5595)
* add more locking for shared SPI devices
* call initSPI before the lock is used
* remove old one
* don't double lock
* Add missing unlock
* More missing unlocks
* Add locks to SafeFile, remove from `readcb`, introduce some LockGuards
* fix lock in setupSDCard()
* pull radiolib trunk with SPI-CS fixes
* change ContentHandler to Constructor type locks, where applicable
---------
Co-authored-by: mverch67 <manuel.verch@gmx.de>
Co-authored-by: GUVWAF <thijs@havinga.eu>
Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>
* mesh-tab: lower I2C touch frequency
---------
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: mverch67 <manuel.verch@gmx.de>
Co-authored-by: GUVWAF <thijs@havinga.eu>
Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>
Selection of minor edits from the TFT branch that are too
challenging to cherry-pick cleanly, including:
* introducing the HAS_TFT flag
* fixing pins in unphone
* Adding pinterdevice to portduino settings
* Added support for the LR1121 radio
Added support for the LR1121 radio, tested as functional with an E80-900M2213S from CDEbyte.
* Swap PNG for PDF
* remove PNG
* put TCXO voltage to 1.8, as in example file
It worked at 1.6v, but ¯\_(ツ)_/¯
* Hopefully this will appease Trunk
* Update rf switch pins and Schematic
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
- Support TLORA_V3.0. Update of the legendary 2.1_1.6.1 with solar charger, TCXO and IPEX connector.
- 'extra' some short-lived EOL intermediate boards in that range. If possible use T3S3 instead of all of these!
- update trunk to latest version
Unset BUTTON_PIN and BUTTON_NEED_PULLUP as the board ships without a user button.
Devices and users expecting a button on GPIO12 have to set [GPIO for user button](https://meshtastic.org/docs/configuration/radio/device/#gpio-for-user-button) to 12 (or any GPIO pin the momentary switch was connected to) to restore functionality.
Signed-off-by: Andrew Yong <me@ndoo.sg>
