Expertly triaged by @philon- , turning off wifi using the HTTP API
did not work. That was because we only served the HTTP API if Wifi
was deemed to be available, but mid-way through turning it off Wifi
was still available, but the configuration we were checking said it wasn't.
This patch introduces an additional way the system can determine if Wifi
is available, by referring to the WiFi.status(). This means that in that
limbo state where Wifi has been set to be turned off, but the configuration
has not been saved and it is still up, the HTTP API will stay up long enough
to save the configuration.
Fixes https://github.com/meshtastic/firmware/issues/6965
* treewide: make 'ifdef DEBUG_PORT' guards also take into account DEBUG_MUTE
* stm32wl: Add a guard against having debug prints turned on without PIO_FRAMEWORK_ARDUINO_NANOLIB_FLOAT_PRINTF defined
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
As reported by @KZ1R , Kazakhstan has frequencies in use for Lora devices that are not covered by our existing band selections.
This adds
* KZ_433 433.075 - 434.775 MHz <10 mW EIRP, Low Powered Devices (LPD)
* KZ_863 863 - 868 MHz <25 mW EIRP, 500kHz channels allowed, must not be used at airfields
Legal ref provided in https://github.com/meshtastic/firmware/issues/7204 and verified.
https://www.gov.kz/memleket/entities/mdai/press/article/details/6128
Order of the Ministry of Investments and Development of the Republic of Kazakhstan No. 34 dated January 21, 2015.
Published on 01 July 2024 19:03 Updated on 01 July 2024
Fixes https://github.com/meshtastic/firmware/issues/7204
* Initial work on splitting notification renderer into components for reuse
* More progress
* Fix notification popup
* more fix, less crash
* Adjustments for OLED on keeping menus tidy, added Bluetooth Toggle to Home frame. Also widen the frame slightly if you have a scroll bar
* Small changes for EInk to not crowd elements
* Change System frame menu over to better match actions; added color picker for T114
* Fix build errors and add T190 for testing
* Logic gates are hard sometimes
* Screen Color Picker changes, defined Yellow as a Color.
* Additional colors and tuning
* Abandon std::sort in NodeDB, and associated fixes (#7175)
* Generate short name for nodes that don't have user yet
* Add reboot menu
* Sort fixes
* noop sort option to avoid infinite loop
* Refactor Overlay Banner
* Continuing work on Color Picker
* Add BaseUI menus to add and remove Favorited Nodes
* Create TFT_MESH_OVERRIDE for variants.h and defined colors
* Trigger a NodeStatus update at the end of setup() to get fresh data on display at boot.
* T114 defaults to White, Yellow is now bright Yellow
* Revert "T114 defaults to White, Yellow is now bright Yellow"
This reverts commit 8d05e17f11.
* Only show OEM text if not OLED
* Adjust OEM logo to maximize visible area
* Start plumbing in Color Picker changes
* Finished plumbing
* Fix warning
* Revert "Fix warning"
This reverts commit 2e8aecd52d.
* Fix display not fully redrawing
* T-Deck should get color too
* Emote Revamp
* Update emotes.cpp
* Poo Emote fix
* Trunk fix
* Add secret test menu and number picker
* Missed bits
* Save colors between reboots
* Save Clock Face election to protobuf
* Make reboot first, then settings
* Add padding for single line pop-ups
* Compass saving and faster menus
* Resolve build issue with Excluding GPS
* Resolve issue with memory bars on EInk
* Add brightness settings for supported screen (#7182)
* Add brightness menu.
* add loop destination selection.
* Bring back color (and sanity) to the menus!
* Trunk
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jason P <applewiz@mac.com>
Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com>
Co-authored-by: Wilson <m.tools@qq.com>
* Add support for RAK3112 variant with necessary configurations and definitions
* Add the configuration of the LED pin
* Refactor rak3112 variant configuration: update name, remove unused files,
* Update RAK3112 configuration: refine memory settings, adjust GPS pin definitions
* Update RAK3112 hardware vendor definition to use correct model
* configure LED pins and update module definitions
* Update USB mode configuration for RAK3112 board
* Update power and battery configuration in rak3112 variant
* Cancel the modification of mesh.pb.h
* Rename RAKwireless RAK3112 to RAK3312
---------
Co-authored-by: daniel <daniel.cao@rakwireless.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Update platformio inis for stm32 platform and wio-e5 variant for enabling i2c
* Don't reference timezone functions if MESHTASTIC_EXCLUDE_TZ is defined
* Use custom pow_of_two in RadioInterface instead of floating-point pow()
* First pass: enable sensors for STM32wL
* Fix AirQualityTelemetryModule being created if the PM25AQI header is missing
* Link in power sensor libraries
* more ini tweaks
* Add =1 to EXCLUDE defines, fix indentation.
* Drop HAS_WIRE in ini, it's defined in architecture.h
* Fix build when power sensor libraries are missing
Make MAX sensor integration into Power.cpp optional based on its library header existing.
Also make NullSensor expose a voltage and current sensor, because Power calls directly into these for INA sensors.
This lets us remove all the deps for the STM32WL platform.
* Change default I2C for RAK3172 to be I2C1, not I2C2
* Respect the laws of mathematics (oops)
