* rework I2C sensor init
the goal is to only instantiate sensors that are pressend to save memory.
side effacts:
- easyer sensor integration (less C&P code)
- nodeTelemetrySensorsMap can be removed when all devices are migrated
* add missing ifdef
* refactor a bunch of more sensors
RAM -816
Flash -916
* fix build for t1000
* refactor more sensors
RAM -192
Flash -60
* improve error handling
Flash -112
* fix build
* fix build
* fix IndicatorSensor
* fix tracker-t1000-e build
not sure what magic is used but it works
* Apply suggestion from @Copilot
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Apply suggestion from @Copilot
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Apply suggestion from @Copilot
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update src/modules/Telemetry/Sensor/DFRobotGravitySensor.h
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Fix
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Null out user.id except for sending to phone
* Fix
* Update src/modules/NodeInfoModule.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Copilot garbage
* This is unnecessary, because we don't stored user.id on userlite
* Don't need this
* Fix warning
* Just alter the protobuf
* Alter protobuf doesn't do anything with the altered data, so let's re-encode it
* Check inputbroker before access
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Start portduino_config refactor
* refactor GPIOs to new portduino_config
* More portduino_config work
* More conversion to portduino_config
* Finish portduino_config transition
* trunk
* yaml output work
* Simplify the GPIO config
* Trunk
* Fix excluded modules configuration handling
- Add excluded_modules flags in getDeviceMetadata() for MQTT, PAXCOUNTER, STOREFORWARD, RANGETEST, NEIGHBORINFO
- Add conditional compilation guards in AdminModule for RANGETEST, AUDIO, PAXCOUNTER, STOREFORWARD, EXTNOTIF, DETECTIONSENSOR, AMBIENTLIGHTING
- Add skip logic in PhoneAPI for excluded modules during config enumeration
- Add conditional has_* flags in NodeDB only for included modules
Fixes issue where excluded modules still appeared in client applications and sometimes caused PAYLOADVARIANT_NOT_SET errors.
* Fix excluded modules issues and refactor code
- Restore original PAXCOUNTER logic: only exclude on non-ESP32 platforms due to memory constraints
- Fix has_store_forward flag to be conditionally compiled based on MESHTASTIC_EXCLUDE_STOREFORWARD
- Refactor PhoneAPI module config skipping logic to use helper function skipExcludedModuleConfig()
- Reduce code duplication in PhoneAPI by extracting common skip logic
This addresses the three issues identified in the code review:
1. PAXCOUNTER memory impact on non-ESP32 devices
2. Unconditional has_store_forward flag setting
3. Duplicated state management logic across multiple #else blocks
* Fix ambient lighting module exclusion in PhoneAPI and AdminModule
- Add conditional compilation guards for ambient lighting in PhoneAPI.cpp
- Replace old HAS_RGB_LED logic with MESHTASTIC_EXCLUDE_AMBIENTLIGHTING check in AdminModule.cpp
- Ensure ambient lighting module is properly excluded when MESHTASTIC_EXCLUDE_AMBIENTLIGHTING=1
* Start portduino_config refactor
* refactor GPIOs to new portduino_config
* More portduino_config work
* More conversion to portduino_config
* Finish portduino_config transition
* trunk
* yaml output work
* Simplify the GPIO config
* Trunk
* Show ExternalNotification as excluded if it is
* Enable ExternalNotification, SerialModule and RangeTest on STM32WL
* Misc fixes for #7797 - ARCH_STM32 -> ARCH_STM32WL, use less flash by dropping weather station support for serialmodule, set tx/rx pins before begin
* Enable Serial1 on RAK3172, make SerialModule use it (console is on LPUART1)
* Fix SerialModule on RAK3172, fix board definition of RAK3172 to include the right pin mapping.
* Show ExternalNotification as excluded if it is
* Enable ExternalNotification, SerialModule and RangeTest on STM32WL
* Misc fixes for #7797 - ARCH_STM32 -> ARCH_STM32WL, use less flash by dropping weather station support for serialmodule, set tx/rx pins before begin
* Enable Serial1 on RAK3172, make SerialModule use it (console is on LPUART1)
* Fix SerialModule on RAK3172, fix board definition of RAK3172 to include the right pin mapping.
* Add on-screen keyboard implementation on Trackball device.
* Update On-Screen Keyboard to new layout.
* The on-screen keyboard dynamically adjusts the key size based on the screen.
* Improve input box display on small screens.
* Optimize the virtual keyboard layout and cursor movement logic, and adjust the keyboard starting position for small and wide screens.
* Optimize the text alignment of numeric keys on ssd1306.
---------
Co-authored-by: whywilson <m.tools@qq.com>
* Add on-screen keyboard implementation on Wio Tracker L1.
* Update On-Screen Keyboard to new layout.
* The on-screen keyboard dynamically adjusts the key size based on the screen.
* Improve input box display on small screens.
* Optimize the virtual keyboard layout and cursor movement logic, and adjust the keyboard starting position for small and wide screens.
* Optimize the text alignment of numeric keys on ssd1306.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Initial support for the ThinkNode M5
* Update variants/esp32s3/ELECROW-ThinkNode-M5/platformio.ini
Co-authored-by: Austin <vidplace7@gmail.com>
* Cleanup variant.h for Elecrow Thinknode M5
* Properly detect battery voltage
* Turn backlight off when screen sleeps
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Austin <vidplace7@gmail.com>
