rbxii3/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2026-01-06 18:08:00 +00:00
Code Issues Packages Projects Releases Wiki Activity
9,237 Commits 101 Branches 318 Tags
2b1f45fd8b246cc792f2fa2e8669806e5a8c6b8e
Commit Graph

784 Commits

Author SHA1 Message Date
Ben Meadors
8ad89ba724 Allow for better target level Radiolib exclude plumbing (#4906) 
* WIP

* LR11x0

* Anothern

* =1
 2024-09-30 05:14:22 -05:00
Thomas Göttgens
7963ca6171 Merge pull request #4869 from meshtastic/t3s3-1121 
Support T3S3 LR1121 variant
 2024-09-28 20:13:26 +02:00
Ben Meadors
6a355616c7 Another extra 2024-09-28 13:06:01 -05:00
Ben Meadors
ec23189407 Making some board levels extra for uncommon hardware 2024-09-28 13:04:50 -05:00
Thomas Göttgens
479b0856b4 use rfswitch definition and update radiolib 2024-09-28 19:07:11 +02:00
Thomas Göttgens
7289f36600 Merge branch 'master' into t3s3-1121 2024-09-28 17:51:21 +02:00
GUVWAF
12efedec42 Potential fix for bad Rx performance on T1000-E (#4885) 
* Potential fix for bad Rx performance on T1000-E

* validate and refactor RF switching, eliminate godmode

---------

Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
 2024-09-28 09:24:13 -05:00
Thomas Göttgens
da346159f7 fix overzealous pin definitions 2024-09-28 14:01:42 +02:00
Thomas Göttgens
c650e7d273 finish TLora C6 Support, without bluetooth for now 2024-09-28 13:42:32 +02:00
Thomas Göttgens
cb1cf055b1 Merge branch 'master' into esp32-c6 2024-09-27 22:51:29 +02:00
Thomas Göttgens
a32233bb92 fixa de typo too 2024-09-26 12:15:37 +02:00
Thomas Göttgens
fff2e435b5 Merge branch 'master' into t3s3-1121 2024-09-26 12:13:45 +02:00
Thomas Göttgens
8f84a96b69 refactor: typo fix in macro definition 2024-09-26 12:12:08 +02:00
Thomas Göttgens
3072b2a444 Merge branch 'master' into esp32-c6 2024-09-26 00:20:00 +02:00
Thomas Göttgens
26112ba001 Support T3S3 LR1121 variant 2024-09-25 18:56:17 +02:00
dylanli
1293c5cdd4 Support for Seeed XIAO S3 Board (#4850) 
* feat: add seeed-xiao-s3 board defination and pins defination

* chore:  add SEEED XIAO S3 into mesh pb

* fix: fix trunk fmt check failed

* Trunk fmt variant.h

* Restore automatically generated file

---------

Co-authored-by: Tom Fifield <tom@tomfifield.net>
 2024-09-25 18:27:14 +08:00
Tom Fifield
e6e05dda1e Merge branch 'master' into master 2024-09-25 15:10:48 +08:00
Todd Herbert
76900555e8 Swap SDA and SCL 
SDA=P0.16, SCL=P0.13
 2024-09-24 00:25:43 +12:00
Todd Herbert
f960164c0e Add I2C bus to Heltec T114 header pins 
SDA: P0.13
SCL: P0.16

Uses bus 1, leaving bus 0 routed to the unpopulated footprint for the RTC (general future-proofing)
 2024-09-24 00:25:43 +12:00
Austin
2ff0af55b1 [Board] DIY "t-energy-s3_e22" (#4782) 
* New variant "t-energy-s3_e22"

- Lilygo T-Energy-S3
- NanoVHF "Mesh-v1.06-TTGO-T18" board
- Ebyte E22 Series

* add board_level = extra

* Update variant.h

---------

Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
 2024-09-22 14:47:49 +08:00
Thomas Göttgens
906b0233d2 Merge pull request #4801 from meshtastic/heltec-wireless-bridge 
heltec-wireless-bridge
 2024-09-21 16:15:28 +02:00
Thomas Göttgens
e6c7c80b3f Raspberry Pico2 - needs protos 2024-09-21 14:50:19 +02:00
Thomas Göttgens
52cef05c70 heltec-wireless-bridge 
requires Proto PR first
 2024-09-21 12:42:51 +02:00
Thomas Göttgens
8e5928276b update pin definitions 
update toolchain
enable telemetry
fix compilation
 2024-09-21 11:27:14 +02:00
Thomas Göttgens
f1cf2bf413 First stab at ESP32-C6 support for TLora-C6 2024-09-21 11:24:52 +02:00
todd-herbert
ba31a7c753 Honor flip & color for Heltec T114 and T190 (#4786) 
* Honor TFT_MESH color if defined for Heltec T114 or T190

* Temporary: point lib_deps at fork of Heltec's ST7789 library
For demo only, until ST7789 is merged

* Update lib_deps; tidy preprocessor logic
 2024-09-20 13:27:41 -05:00
Jonathan Bennett
82f1be33aa Merge branch 'master' into master 2024-09-19 19:43:05 -05:00
Tom Fifield
19c57e8ec6 Fix Chatter 2 blank screen on boot (#4759) 
As reported by @eureekasigns and @GPSFan, Chatter 2 had begun
to show a blank screen on boot after recent TFT display changes.

Setting TFT_BACKLIGHT_ON LOW resolves the issue.

Fixes https://github.com/meshtastic/firmware/issues/4751
 2024-09-18 09:05:32 -05:00
GUVWAF
db4a793aa9 Merge branch 'master' into master 2024-09-18 11:38:40 +02:00
S5NC
b025eeb13c Update variant.h 2024-09-17 15:24:11 +08:00
jhps
1e665d5181 Update T114 LED definitions to include only one simple controllable LED and two NEOPIXELS. (#4710) 2024-09-16 19:11:55 -05:00
Tom Fifield
905194c604 Remove lora_isp4520 (#4735) 
Per Ben: "We haven't supported any NRF5832 based board in quite some time.
It's relatively resource constrained compared to the NRF52840"
 2024-09-16 09:06:13 -05:00
Mark Trevor Birss
4e8672cce4 Update variant.h 2024-09-16 10:40:52 +02:00
Ben Meadors
8d57b6164a Add Heltec T1114 hardware model to build (#4719) 2024-09-15 20:37:19 -05:00
GUVWAF
b39aca8d11 Merge branch 'master' into master 2024-09-13 08:49:04 +02:00
Vertex
3d72fbb19e Define SX126X_ANT_SW for the RAK11200 to allow it to function correctly on the RAK19007 base (#4690) 2024-09-12 12:20:38 -05:00
Manuel
625254cf90 Support Seeed SenseCAP Indicator (#4279) 
* preliminary target environment

* add debug tool

* add screen definitions

* screen definitions

* remove rtc, debug build

* correct rotation

* Add real hwmodel

* fix width

* use IO expander ports

* link to modified arduino-esp32

* added config_detail

* rotate screen

* remove touch INT

* add delay to display log

* color log and radiolib log

* LoRa init

* make trunk happy

* add lovyanGFX patch lib for io expander

* fix lib

* fix display&touch function

* touch driver I2C scan

* remove delay

* build for release

* minor code cleanup

* allow trunk to be happy

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
 2024-09-12 06:44:30 -05:00
beegee-tokyo
35cdc81d45 Disable SCREEN and enable TZ 2024-09-12 09:53:13 +08:00
panaceya
910b6b7512 OLED_ can be configured via userPrefs.h (#4624) 2024-09-11 19:31:30 -05:00
Michael Gjelsø
f37df4d6bf Radiomaster Bandit Accelerometer support (#4667) 
* Added STK8xxxx Accelerometer chip

Added detection of STK8BA53 to I2C scanner.
Change the way and order MCP9808, lLISH3DH and STK8BA53 is detected since they all shares the same I2C address.

* Accelerometer support Radiomaster Bandit.

Enables tap to wake screen if enabled in config,

* Trunk

Trunk
 2024-09-11 18:53:17 -05:00
beegee-tokyo
9188786581 Fix #ifndef and rename the variant 2024-09-10 11:58:25 +08:00
beegee-tokyo
a5b79528b3 Add RAK4631 Ethernet Gateway with working JSON output to MQTT 2024-09-09 11:56:37 +08:00
Thomas Göttgens
2f0c19ebea - use setRfSwitchTable 
- ditch Godmode
- fixes Signedness Error in Loop.
- add V3 factory erase for 7.3.0 softdevice
 2024-09-02 15:06:06 +02:00
Ben Meadors
8729cdb699 Merge branch 'master' into pr-fix4154 2024-08-30 16:31:47 -05:00
Ben Meadors
7475cc301e GPS_POWER_TOGGLE on T114 2024-08-30 15:37:39 -05:00
Manuel
6a24566efb Lilygo T3S3 E-Paper support (#4569) 
* t3s3 e-paper support

* remove GPS autodetect (which leads to crashes during startup when no GPS present)

* update EINK defines

* keep definitions for external GPS connector but disable GPS auto scan by default
 2024-08-30 05:53:06 -05:00
Mark Trevor Birss
22454c95c7 [BOARD] Add Minewsemi MS24SF1 nRF52840 SX1262 Module (SoftDevice 7.3.0) (#4584) 
* Update architecture.h

* Add files via upload

* Add files via upload

* Update variant.h

* Update variant.h

* Update variant.cpp

* Update variant.cpp

* Update variant.cpp
 2024-08-29 16:17:44 -05:00
Ben Meadors
a1bf0d8519 Add button secondary and enable scan-select on T190 (#4577) 2024-08-28 11:25:54 -07:00
Ben Meadors
3ad0af5ce8 Fix super tiny T1114 tft font size and fork repo to fix compiler warnings (#4573) 2024-08-28 11:25:54 -07:00
John Milton
1fe80e0f30 Add support for Adafruit Feather RP2040 with RFM95. (#4451) 
* Add support for Adafruit Feather RP2040 with RFM95.

* Update mesh.pb.h

dropping this change from the file generated by the protobuf

* Update mesh.pb.h

remove these reverting changes

* Update mesh.pb.h

oops, missed a comma
 2024-08-28 11:25:54 -07:00