Initial upload

src/modules/Telemetry/EnvironmentTelemetry.cpp

@@ -23,6 +23,7 @@
 #include "Sensor/BME680Sensor.h"
 #include "Sensor/BMP085Sensor.h"
 #include "Sensor/BMP280Sensor.h"
+#include "Sensor/BMP3XXSensor.h"
 #include "Sensor/DFRobotLarkSensor.h"
 #include "Sensor/LPS22HBSensor.h"
 #include "Sensor/MCP9808Sensor.h"
@@ -40,6 +41,7 @@
 BMP085Sensor bmp085Sensor;
 BMP280Sensor bmp280Sensor;
 BME280Sensor bme280Sensor;
+BMP3XXSensor bmp3xxSensor;
 BME680Sensor bme680Sensor;
 MCP9808Sensor mcp9808Sensor;
 SHTC3Sensor shtc3Sensor;
@@ -107,6 +109,8 @@ int32_t EnvironmentTelemetryModule::runOnce()
                 result = bmp280Sensor.runOnce();
             if (bme280Sensor.hasSensor())
                 result = bme280Sensor.runOnce();
+            if (bmp3xxSensor.hasSensor())
+                result = bmp3xxSensor.runOnce();
             if (bme680Sensor.hasSensor())
                 result = bme680Sensor.runOnce();
             if (mcp9808Sensor.hasSensor())
@@ -327,6 +331,10 @@ bool EnvironmentTelemetryModule::getEnvironmentTelemetry(meshtastic_Telemetry *m
         valid = valid && bme280Sensor.getMetrics(m);
         hasSensor = true;
     }
+    if (bmp3xxSensor.hasSensor()) {
+        valid = valid && bmp3xxSensor.getMetrics(m);
+        hasSensor = true;
+    }
     if (bme680Sensor.hasSensor()) {
         valid = valid && bme680Sensor.getMetrics(m);
         hasSensor = true;
@@ -372,15 +380,21 @@ bool EnvironmentTelemetryModule::getEnvironmentTelemetry(meshtastic_Telemetry *m
         hasSensor = true;
     }
     if (aht10Sensor.hasSensor()) {
-        if (!bmp280Sensor.hasSensor()) {
+        if (!bmp280Sensor.hasSensor() && !bmp3xxSensor.hasSensor()) {
             valid = valid && aht10Sensor.getMetrics(m);
             hasSensor = true;
-        } else {
+        } else if (bmp280Sensor.hasSensor()) {
             // prefer bmp280 temp if both sensors are present, fetch only humidity
             meshtastic_Telemetry m_ahtx = meshtastic_Telemetry_init_zero;
             LOG_INFO("AHTX0+BMP280 module detected: using temp from BMP280 and humy from AHTX0\n");
             aht10Sensor.getMetrics(&m_ahtx);
             m->variant.environment_metrics.relative_humidity = m_ahtx.variant.environment_metrics.relative_humidity;
+        } else {
+            // prefer bmp3xx temp if both sensors are present, fetch only humidity
+            meshtastic_Telemetry m_ahtx = meshtastic_Telemetry_init_zero;
+            LOG_INFO("AHTX0+BMP3XX module detected: using temp from BMP3XX and humy from AHTX0\n");
+            aht10Sensor.getMetrics(&m_ahtx);
+            m->variant.environment_metrics.relative_humidity = m_ahtx.variant.environment_metrics.relative_humidity;
         }
     }
 
@@ -508,6 +522,11 @@ AdminMessageHandleResult EnvironmentTelemetryModule::handleAdminMessageForModule
         if (result != AdminMessageHandleResult::NOT_HANDLED)
             return result;
     }
+    if (bmp3xxSensor.hasSensor()) {
+        result = bmp3xxSensor.handleAdminMessage(mp, request, response);
+        if (result != AdminMessageHandleResult::NOT_HANDLED)
+            return result;
+    }
     if (bme680Sensor.hasSensor()) {
         result = bme680Sensor.handleAdminMessage(mp, request, response);
         if (result != AdminMessageHandleResult::NOT_HANDLED)

src/modules/Telemetry/Sensor/BMP3XXSensor.cpp

@@ -0,0 +1,58 @@
+#include "configuration.h"
+
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
+
+#include "../mesh/generated/meshtastic/telemetry.pb.h"
+#include "BMP3XXSensor.h"
+#include "TelemetrySensor.h"
+#include <Adafruit_BMP3XX.h>
+#include <typeinfo>
+
+BMP3XXSensor::BMP3XXSensor() : TelemetrySensor(meshtastic_TelemetrySensorType_BMP3XX, "BMP3XX"){}
+
+int32_t BMP3XXSensor::runOnce()
+{
+    LOG_INFO("Init sensor: %s\n", sensorName);
+    if (!hasSensor())
+    {
+        return DEFAULT_SENSOR_MINIMUM_WAIT_TIME_BETWEEN_READS;
+    }
+
+    status = bmp3xx.begin_I2C(nodeTelemetrySensorsMap[sensorType].first, nodeTelemetrySensorsMap[sensorType].second);
+
+    // set up oversampling and filter initialization
+    bmp3xx.setTemperatureOversampling(BMP3_OVERSAMPLING_4X);
+    bmp3xx.setPressureOversampling(BMP3_OVERSAMPLING_8X);
+    bmp3xx.setIIRFilterCoeff(BMP3_IIR_FILTER_COEFF_3);
+    bmp3xx.setOutputDataRate(BMP3_ODR_25_HZ);
+
+    // take a couple of initial readings to settle the sensor filters
+    for (int i = 0; i < 3; i++)
+    {
+        bmp3xx.performReading();
+    }
+    return initI2CSensor();
+}
+
+bool BMP3XXSensor::getMetrics(meshtastic_Telemetry *measurement)
+{
+    if ((int)measurement->which_variant == meshtastic_Telemetry_environment_metrics_tag)
+    {
+        bmp3xx.performReading();
+        measurement->variant.environment_metrics.temperature = bmp3xx.readTemperature();
+        measurement->variant.environment_metrics.barometric_pressure = bmp3xx.readPressure() / 100.0F;
+        LOG_DEBUG("BMP3XXSensor::getMetrics id: %i temp: %.1f press %.1f\n", measurement->which_variant, measurement->variant.environment_metrics.temperature, measurement->variant.environment_metrics.barometric_pressure);
+    }
+    else
+    {
+        LOG_DEBUG("BMP3XXSensor::getMetrics id: %i\n", measurement->which_variant);
+    }
+    return true;
+}
+
+float BMP3XXSensor::getAltitudeAMSL()
+{
+    return bmp3xx.readAltitude(SEAL_LEVEL_HPA);
+}
+
+#endif

src/modules/Telemetry/Sensor/BMP3XXSensor.h

@@ -0,0 +1,31 @@
+#include "configuration.h"
+
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
+
+#ifndef _BMP3XX_SENSOR_H
+#define _BMP3XX_SENSOR_H
+
+#define SEAL_LEVEL_HPA 1013.2f
+
+#include "../mesh/generated/meshtastic/telemetry.pb.h"
+#include "TelemetrySensor.h"
+#include <Adafruit_BMP3XX.h>
+
+class BMP3XXSensor : public TelemetrySensor
+{
+protected:
+  Adafruit_BMP3XX bmp3xx;
+  float pressureHPa = 0.0f;
+  float temperatureCelcius = 0.0f;
+  float altitudeAmslMetres = 0.0f;
+
+public:
+  BMP3XXSensor();
+  virtual int32_t runOnce() override;
+  virtual bool getMetrics(meshtastic_Telemetry *measurement) override;
+  virtual float getAltitudeAMSL();
+};
+
+#endif
+
+#endif