Merge branch 'master' into moar-nxp

.github/FUNDING.yml

@@ -0,0 +1,3 @@
+# These are supported funding model platforms
+
+open_collective: meshtastic

.github/actions/build-variant/action.yml

@@ -27,10 +27,10 @@ inputs:
     description: A newline separated list of paths to store as artifacts
     required: false
     default: ""
-  include-web-ui:
+  # include-web-ui:
-    description: Include the web UI in the build
+  #   description: Include the web UI in the build
-    required: false
+  #   required: false
-    default: "false"
+  #   default: "false"
   arch:
     description: Processor arch name
     required: true
@@ -43,22 +43,29 @@ runs:
       id: base
       uses: ./.github/actions/setup-base
 
-    - name: Pull web ui
+    # - name: Get web ui version
-      if: inputs.include-web-ui == 'true'
+    #   if: inputs.include-web-ui == 'true'
-      uses: dsaltares/fetch-gh-release-asset@master
+    #   id: webver
-      with:
+    #   shell: bash
-        repo: meshtastic/web
+    #   run: |
-        file: build.tar
+    #     echo "ver=$(cat bin/web.version)" >> $GITHUB_OUTPUT
-        target: build.tar
-        token: ${{ inputs.github_token }}
-        version: tags/v2.5.3
 
-    - name: Unpack web ui
+    # - name: Pull web ui
-      if: inputs.include-web-ui == 'true'
+    #   if: inputs.include-web-ui == 'true'
-      shell: bash
+    #   uses: dsaltares/fetch-gh-release-asset@master
-      run: |
+    #   with:
-        tar -xf build.tar -C data/static
+    #     repo: meshtastic/web
-        rm build.tar
+    #     file: build.tar
+    #     target: build.tar
+    #     token: ${{ inputs.github_token }}
+    #     version: tags/v${{ steps.webver.outputs.ver }}
+
+    # - name: Unpack web ui
+    #   if: inputs.include-web-ui == 'true'
+    #   shell: bash
+    #   run: |
+    #     tar -xf build.tar -C data/static
+    #     rm build.tar
 
     - name: Remove debug flags for release
       shell: bash

.github/dependabot.yml

@@ -1,29 +0,0 @@
-#trunk-ignore-all(yamllint/quoted-strings): required by dependabot syntax check
-version: 2
-updates:
-  - package-ecosystem: docker
-    directory: /.devcontainer
-    schedule:
-      interval: daily
-      time: "05:00"
-      timezone: US/Pacific
-  - package-ecosystem: docker
-    directory: /
-    schedule:
-      interval: daily
-      time: "05:00"
-      timezone: US/Pacific
-  - package-ecosystem: gitsubmodule
-    directory: /
-    schedule:
-      interval: daily
-      time: "05:00"
-      timezone: US/Pacific
-    ignore:
-      - dependency-name: protobufs
-  - package-ecosystem: github-actions
-    directory: /.github/workflows
-    schedule:
-      interval: daily
-      time: "05:00"
-      timezone: US/Pacific

.github/pull_request_template.md

@@ -1,6 +1,7 @@
 ## 🙏 Thank you for sending in a pull request, here's some tips to get started!
 
 ### ❌ (Please delete all these tips and replace them with your text) ❌
+
 - Before starting on some new big chunk of code, it it is optional but highly recommended to open an issue first
   to say "Hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
   is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
@@ -15,12 +16,12 @@
 - If you do not have the affected hardware to test your code changes adequately against regressions, please indicate this, so that contributors and commnunity members can help test your changes.
 - If your PR gets accepted you can request a "Contributor" role in the Meshtastic Discord
 
-
 ## 🤝 Attestations
+
 - [ ] I have tested that my proposed changes behave as described.
 - [ ] I have tested that my proposed changes do not cause any obvious regressions on the following devices:
   - [ ] Heltec (Lora32) V3
-  - [ ] LilyGo T-Deck 
+  - [ ] LilyGo T-Deck
   - [ ] LilyGo T-Beam
   - [ ] RAK WisBlock 4631
   - [ ] Seeed Studio T-1000E tracker card

.github/workflows/build_esp32.yml

@@ -11,27 +11,30 @@ permissions: read-all
 
 jobs:
   build-esp32:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-24.04
     steps:
       - uses: actions/checkout@v4
 
+      - name: Get release version string
+        shell: bash
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
       - name: Build ESP32
         id: build
-        uses: ./.github/actions/build-variant
+        uses: meshtastic/gh-action-firmware@main
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
+          pio_platform: esp32
-          board: ${{ inputs.board }}
+          pio_env: ${{ inputs.board }}
-          remove-debug-flags: >-
+          pio_target: build
-            ./arch/esp32/esp32.ini
+          ota_firmware_source: firmware.bin
-            ./arch/esp32/esp32s2.ini
+          ota_firmware_target: release/bleota.bin
-            ./arch/esp32/esp32s3.ini
+
-            ./arch/esp32/esp32c3.ini
+      - name: Store binaries as an artifact
-            ./arch/esp32/esp32c6.ini
+        uses: actions/upload-artifact@v4
-          build-script-path: bin/build-esp32.sh
+        with:
-          ota-firmware-source: firmware.bin
+          name: firmware-esp32-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
-          ota-firmware-target: release/bleota.bin
+          overwrite: true
-          artifact-paths: |
+          path: |
             release/*.bin
             release/*.elf
-          include-web-ui: true
-          arch: esp32

.github/workflows/build_esp32_c3.yml

@@ -11,27 +11,30 @@ permissions: read-all
 
 jobs:
   build-esp32-c3:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-24.04
     steps:
       - uses: actions/checkout@v4
 
+      - name: Get release version string
+        shell: bash
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
       - name: Build ESP32-C3
         id: build
-        uses: ./.github/actions/build-variant
+        uses: meshtastic/gh-action-firmware@main
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
+          pio_platform: esp32
-          board: ${{ inputs.board }}
+          pio_env: ${{ inputs.board }}
-          remove-debug-flags: >-
+          pio_target: build
-            ./arch/esp32/esp32.ini
+          ota_firmware_source: firmware-c3.bin
-            ./arch/esp32/esp32s2.ini
+          ota_firmware_target: release/bleota-c3.bin
-            ./arch/esp32/esp32s3.ini
+
-            ./arch/esp32/esp32c3.ini
+      - name: Store binaries as an artifact
-            ./arch/esp32/esp32c6.ini
+        uses: actions/upload-artifact@v4
-          build-script-path: bin/build-esp32.sh
+        with:
-          ota-firmware-source: firmware-c3.bin
+          name: firmware-esp32c3-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
-          ota-firmware-target: release/bleota-c3.bin
+          overwrite: true
-          artifact-paths: |
+          path: |
             release/*.bin
             release/*.elf
-          include-web-ui: true
-          arch: esp32c3

.github/workflows/build_esp32_c6.yml

@@ -11,27 +11,30 @@ permissions: read-all
 
 jobs:
   build-esp32-c6:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-24.04
     steps:
       - uses: actions/checkout@v4
 
+      - name: Get release version string
+        shell: bash
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
       - name: Build ESP32-C6
         id: build
-        uses: ./.github/actions/build-variant
+        uses: meshtastic/gh-action-firmware@main
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
+          pio_platform: esp32
-          board: ${{ inputs.board }}
+          pio_env: ${{ inputs.board }}
-          remove-debug-flags: >-
+          pio_target: build
-            ./arch/esp32/esp32.ini
+          ota_firmware_source: firmware-c3.bin
-            ./arch/esp32/esp32s2.ini
+          ota_firmware_target: release/bleota-c3.bin
-            ./arch/esp32/esp32s3.ini
+
-            ./arch/esp32/esp32c3.ini
+      - name: Store binaries as an artifact
-            ./arch/esp32/esp32c6.ini
+        uses: actions/upload-artifact@v4
-          build-script-path: bin/build-esp32.sh
+        with:
-          ota-firmware-source: firmware-c3.bin
+          name: firmware-esp32c6-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
-          ota-firmware-target: release/bleota-c3.bin
+          overwrite: true
-          artifact-paths: |
+          path: |
             release/*.bin
             release/*.elf
-          include-web-ui: true
-          arch: esp32c6

.github/workflows/build_esp32_s3.yml

@@ -11,27 +11,30 @@ permissions: read-all
 
 jobs:
   build-esp32-s3:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-24.04
     steps:
       - uses: actions/checkout@v4
 
+      - name: Get release version string
+        shell: bash
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
       - name: Build ESP32-S3
         id: build
-        uses: ./.github/actions/build-variant
+        uses: meshtastic/gh-action-firmware@main
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
+          pio_platform: esp32
-          board: ${{ inputs.board }}
+          pio_env: ${{ inputs.board }}
-          remove-debug-flags: >-
+          pio_target: build
-            ./arch/esp32/esp32.ini
+          ota_firmware_source: firmware-s3.bin
-            ./arch/esp32/esp32s2.ini
+          ota_firmware_target: release/bleota-s3.bin
-            ./arch/esp32/esp32s3.ini
+
-            ./arch/esp32/esp32c3.ini
+      - name: Store binaries as an artifact
-            ./arch/esp32/esp32c6.ini
+        uses: actions/upload-artifact@v4
-          build-script-path: bin/build-esp32.sh
+        with:
-          ota-firmware-source: firmware-s3.bin
+          name: firmware-esp32s3-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
-          ota-firmware-target: release/bleota-s3.bin
+          overwrite: true
-          artifact-paths: |
+          path: |
             release/*.bin
             release/*.elf
-          include-web-ui: true
-          arch: esp32s3

.github/workflows/build_nrf52.yml

@@ -11,20 +11,30 @@ permissions: read-all
 
 jobs:
   build-nrf52:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-24.04
     steps:
       - uses: actions/checkout@v4
 
+      - name: Get release version string
+        shell: bash
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
       - name: Build NRF52
         id: build
-        uses: ./.github/actions/build-variant
+        uses: meshtastic/gh-action-firmware@main
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
+          pio_platform: nrf52
-          board: ${{ inputs.board }}
+          pio_env: ${{ inputs.board }}
-          build-script-path: bin/build-nrf52.sh
+          pio_target: build
-          artifact-paths: |
+
-            release/*.hex
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-nrf52840-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
+          overwrite: true
+          path: |
             release/*.uf2
             release/*.elf
-            release/*.zip
+            release/*.hex
-          arch: nrf52840
+            release/*-ota.zip

.github/workflows/build_rpi2040.yml

@@ -11,18 +11,28 @@ permissions: read-all
 
 jobs:
   build-rpi2040:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-24.04
     steps:
       - uses: actions/checkout@v4
 
+      - name: Get release version string
+        shell: bash
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
       - name: Build Raspberry Pi 2040
         id: build
-        uses: ./.github/actions/build-variant
+        uses: meshtastic/gh-action-firmware@main
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
+          pio_platform: rp2xx0
-          board: ${{ inputs.board }}
+          pio_env: ${{ inputs.board }}
-          build-script-path: bin/build-rpi2040.sh
+          pio_target: build
-          artifact-paths: |
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-rp2040-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
+          overwrite: true
+          path: |
             release/*.uf2
             release/*.elf
-          arch: rp2040

.github/workflows/build_stm32.yml

@@ -11,19 +11,29 @@ permissions: read-all
 
 jobs:
   build-stm32:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-24.04
     steps:
       - uses: actions/checkout@v4
 
+      - name: Get release version string
+        shell: bash
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
       - name: Build STM32WL
         id: build
-        uses: ./.github/actions/build-variant
+        uses: meshtastic/gh-action-firmware@main
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
+          pio_platform: stm32wl
-          board: ${{ inputs.board }}
+          pio_env: ${{ inputs.board }}
-          build-script-path: bin/build-stm32.sh
+          pio_target: build
-          artifact-paths: |
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-stm32-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
+          overwrite: true
+          path: |
             release/*.hex
             release/*.bin
             release/*.elf
-          arch: stm32

.github/workflows/daily_packaging.yml

@@ -1,7 +1,7 @@
 name: Daily Packaging
 on:
   schedule:
-    - cron: 0 9 * * *
+    - cron: 0 2 * * *
   workflow_dispatch:
   push:
     branches:
@@ -30,7 +30,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        series: [plucky, oracular, noble, jammy]
+        series: [plucky, noble, jammy]
     uses: ./.github/workflows/package_ppa.yml
     with:
       ppa_repo: ppa:meshtastic/daily

.github/workflows/docker_build.yml

@@ -26,6 +26,11 @@ on:
         required: false
         type: boolean
         default: false
+      pio_env:
+        description: PlatformIO environment to build
+        required: false
+        type: string
+        default: native
     outputs:
       digest:
         description: Digest of built image
@@ -90,3 +95,5 @@ jobs:
           push: ${{ inputs.push }}
           tags: ${{ steps.meta.outputs.tags }} # Tag is only meant to be consumed by the "manifest" job
           platforms: ${{ inputs.platform }}
+          build-args: |
+            PIO_ENV=${{ inputs.pio_env }}

.github/workflows/main_matrix.yml

@@ -5,14 +5,20 @@ concurrency:
 on:
   # # Triggers the workflow on push but only for the master branch
   push:
-    branches: [master, develop]
+    branches:
+      - master
+      - develop
+      - event/*
     paths-ignore:
       - "**.md"
       - version.properties
 
   # Note: This is different from "pull_request". Need to specify ref when doing checkouts.
   pull_request_target:
-    branches: [master, develop]
+    branches:
+      - master
+      - develop
+      - event/*
     paths-ignore:
       - "**.md"
       #- "**.yml"
@@ -32,12 +38,12 @@ jobs:
         name: Checkout base
       - id: jsonStep
         run: |
-          if [[ "${{ github.head_ref }}" == "" ]]; then
+          if [[ "$GITHUB_HEAD_REF" == "" ]]; then
             TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
           else  
             TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} quick)
           fi
-          echo "Name: ${{ github.ref_name }} Base: ${{ github.base_ref }} } Ref: ${{ github.ref }} Targets: $TARGETS"
+          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF Targets: $TARGETS"
           echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
     outputs:
       esp32: ${{ steps.jsonStep.outputs.esp32 }}
@@ -129,6 +135,7 @@ jobs:
       board: ${{ matrix.board }}
 
   build-debian-src:
+    if: github.repository == 'meshtastic/firmware'
     uses: ./.github/workflows/build_debian_src.yml
     with:
       series: UNRELEASED
@@ -143,9 +150,10 @@ jobs:
     secrets: inherit
 
   test-native:
+    if: ${{ !contains(github.ref_name, 'event/') }}
     uses: ./.github/workflows/test_native.yml
 
-  docker-debian-amd64:
+  docker-deb-amd64:
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: debian
@@ -153,7 +161,16 @@ jobs:
       runs-on: ubuntu-24.04
       push: false
 
-  docker-alpine-amd64:
+  docker-deb-amd64-tft:
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: debian
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+      pio_env: native-tft
+
+  docker-alp-amd64:
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: alpine
@@ -161,7 +178,16 @@ jobs:
       runs-on: ubuntu-24.04
       push: false
 
-  docker-debian-arm64:
+  docker-alp-amd64-tft:
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: alpine
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+      pio_env: native-tft
+
+  docker-deb-arm64:
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: debian
@@ -169,7 +195,7 @@ jobs:
       runs-on: ubuntu-24.04-arm
       push: false
 
-  docker-debian-armv7:
+  docker-deb-armv7:
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: debian
@@ -177,17 +203,6 @@ jobs:
       runs-on: ubuntu-24.04-arm
       push: false
 
-  after-checks:
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name != 'workflow_dispatch' }}
-    needs: [check]
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v4
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
   gather-artifacts:
     permissions:
       contents: write
@@ -243,7 +258,6 @@ jobs:
             ./device-*.sh
             ./device-*.bat
             ./littlefs-*.bin
-            ./littlefswebui-*.bin
             ./bleota*bin
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
@@ -332,7 +346,7 @@ jobs:
           merge-multiple: true
           path: ./output/pio-deps-native-tft
 
-      - name: Zip linux sources
+      - name: Zip Linux sources
         working-directory: output
         run: |
           zip -j -9 -r ./meshtasticd-${{ steps.version.outputs.deb }}-src.zip ./debian-src
@@ -342,7 +356,9 @@ jobs:
       - name: Display structure of downloaded files
         run: ls -lR
 
-      - name: Add linux sources to release
+      - name: Add Linux sources to GtiHub Release
+        # Only run when targeting master branch with workflow_dispatch
+        if: ${{ github.ref_name == 'master' }}
         run: |
           gh release upload v${{ steps.version.outputs.long }} ./output/meshtasticd-${{ steps.version.outputs.deb }}-src.zip
           gh release upload v${{ steps.version.outputs.long }} ./output/platformio-deps-native-tft-${{ steps.version.outputs.long }}.zip
@@ -400,9 +416,53 @@ jobs:
       - name: Display structure of downloaded files
         run: ls -lR
 
-      - name: Add bins and debug elfs to release
+      - name: Add bins and debug elfs to GitHub Release
+        # Only run when targeting master branch with workflow_dispatch
+        if: ${{ github.ref_name == 'master' }}
         run: |
           gh release upload v${{ steps.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
           gh release upload v${{ steps.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+
+  publish-firmware:
+    runs-on: ubuntu-24.04
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    needs: [release-firmware]
+    env:
+      targets: esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,stm32
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+
+      - name: Setup Python
+        uses: actions/setup-python@v5
+        with:
+          python-version: 3.x
+
+      - name: Get release version string
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - uses: actions/download-artifact@v4
+        with:
+          pattern: firmware-{${{ env.targets }}}-${{ steps.version.outputs.long }}
+          merge-multiple: true
+          path: ./publish
+
+      - name: Publish firmware to meshtastic.github.io
+        uses: peaceiris/actions-gh-pages@v4
+        env:
+          # On event/* branches, use the event name as the destination prefix
+          DEST_PREFIX: ${{ contains(github.ref_name, 'event/') && format('{0}/', github.ref_name) || '' }}
+        with:
+          deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
+          external_repository: meshtastic/meshtastic.github.io
+          publish_branch: master
+          publish_dir: ./publish
+          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ steps.version.outputs.long }}
+          keep_files: true
+          user_name: github-actions[bot]
+          user_email: github-actions[bot]@users.noreply.github.com
+          commit_message: ${{ steps.version.outputs.long }}
+          enable_jekyll: true

.github/workflows/nightly.yml

@@ -8,6 +8,7 @@ permissions: read-all
 
 jobs:
   trunk_check:
+    if: github.repository == 'meshtastic/firmware'
     name: Trunk Check and Upload
     runs-on: ubuntu-24.04
 
@@ -21,6 +22,7 @@ jobs:
           trunk-token: ${{ secrets.TRUNK_TOKEN }}
 
   trunk_upgrade:
+    if: github.repository == 'meshtastic/firmware'
     # See: https://github.com/trunk-io/trunk-action/blob/v1/readme.md#automatic-upgrades
     name: Trunk Upgrade (PR)
     runs-on: ubuntu-24.04

.github/workflows/release_channels.yml

@@ -20,7 +20,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        series: [plucky, oracular, noble, jammy]
+        series: [plucky, noble, jammy]
     uses: ./.github/workflows/package_ppa.yml
     with:
       ppa_repo: |-
@@ -46,11 +46,14 @@ jobs:
 
   # Create a PR to bump version when a release is Published
   bump-version:
-    if: ${{ github.event.release.published }}
+    if: github.event.action == 'published'
     runs-on: ubuntu-latest
     permissions:
       pull-requests: write
       contents: write
+    defaults:
+      run:
+        shell: bash
     steps:
       - name: Checkout
         uses: actions/checkout@v4
@@ -60,32 +63,45 @@ jobs:
         with:
           python-version: 3.x
 
-      - name: Get release version string
-        run: |
-          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
-        id: version
-        env:
-          BUILD_LOCATION: local
-
       - name: Bump version.properties
-        run: >-
+        run: |
-          bin/bump_version.py
+          # Bump version.properties
+          chmod +x ./bin/bump_version.py
+          ./bin/bump_version.py
+
+      - name: Get new release version string
+        run: |
+          echo "short=$(./bin/buildinfo.py short)" >> $GITHUB_OUTPUT
+        id: new_version
 
       - name: Ensure debian deps are installed
-        shell: bash
         run: |
           sudo apt-get update -y --fix-missing
           sudo apt-get install -y devscripts
 
       - name: Update debian changelog
-        run: >-
+        run: |
-          debian/ci_changelog.sh
+          # Update debian changelog
+          chmod +x ./debian/ci_changelog.sh
+          ./debian/ci_changelog.sh
 
-      - name: Create version.properties pull request
+      - name: Bump org.meshtastic.meshtasticd.metainfo.xml
+        run: |
+          # Bump org.meshtastic.meshtasticd.metainfo.xml
+          pip install -r bin/bump_metainfo/requirements.txt -q
+          chmod +x ./bin/bump_metainfo/bump_metainfo.py
+          ./bin/bump_metainfo/bump_metainfo.py --file bin/org.meshtastic.meshtasticd.metainfo.xml "${{ steps.new_version.outputs.short }}"
+        env:
+          PIP_DISABLE_PIP_VERSION_CHECK: 1
+
+      - name: Create Bumps pull request
         uses: peter-evans/create-pull-request@v7
         with:
-          title: Bump version.properties
+          base: ${{ github.event.repository.default_branch }}
+          branch: create-pull-request/bump-version
+          title: Bump release version
+          commit-message: automated bumps
           add-paths: |
             version.properties
             debian/changelog
+            bin/org.meshtastic.meshtasticd.metainfo.xml

.github/workflows/sec_sast_semgrep_cron.yml

@@ -13,7 +13,8 @@ permissions:
 
 jobs:
   semgrep-full:
-    runs-on: ubuntu-22.04
+    if: github.repository == 'meshtastic/firmware'
+    runs-on: ubuntu-24.04
     container:
       image: semgrep/semgrep
 

.github/workflows/sec_sast_semgrep_pull.yml

@@ -6,7 +6,7 @@ permissions: read-all
 
 jobs:
   semgrep-diff:
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-24.04
     container:
       image: semgrep/semgrep
 

.github/workflows/stale_bot.yml

@@ -11,6 +11,7 @@ permissions:
 
 jobs:
   stale_issues:
+    if: github.repository == 'meshtastic/firmware'
     name: Close Stale Issues
     runs-on: ubuntu-latest
 

.github/workflows/test_native.yml

@@ -143,7 +143,7 @@ jobs:
           merge-multiple: true
 
       - name: Test Report
-        uses: dorny/test-reporter@v2.0.0
+        uses: dorny/test-reporter@v2.1.1
         with:
           name: PlatformIO Tests
           path: testreport.xml

.github/workflows/tests.yml

@@ -5,13 +5,18 @@ on:
     - cron: 0 0 * * * # Run every day at midnight
   workflow_dispatch: {}
 
-permissions: read-all
+permissions:
+  contents: read
+  actions: read
+  checks: write
 
 jobs:
   native-tests:
+    if: github.repository == 'meshtastic/firmware'
     uses: ./.github/workflows/test_native.yml
 
   hardware-tests:
+    if: github.repository == 'meshtastic/firmware'
     runs-on: test-runner
     steps:
       - name: Checkout code
@@ -44,7 +49,7 @@ jobs:
       - name: Setup Node
         uses: actions/setup-node@v4
         with:
-          node-version: 18
+          node-version: 22
 
       - name: Setup pnpm
         uses: pnpm/action-setup@v4

.github/workflows/update_protobufs.yml

@@ -33,6 +33,7 @@ jobs:
       - name: Create pull request
         uses: peter-evans/create-pull-request@v7
         with:
+          branch: create-pull-request/update-protobufs
           title: Update protobufs and classes
           add-paths: |
             protobufs

.gitignore

@@ -37,4 +37,7 @@ release/
 .vscode/extensions.json
 /compile_commands.json
 src/mesh/raspihttp/certificate.pem
-src/mesh/raspihttp/private_key.pem
+src/mesh/raspihttp/private_key.pem
+
+# Ignore logo (set at build time with platformio-custom.py)
+data/boot/logo.*

.trunk/configs/.prettierignore

@@ -0,0 +1 @@
+renovate.json

.trunk/trunk.yaml

@@ -1,34 +1,34 @@
 version: 0.1
 cli:
-  version: 1.22.11
+  version: 1.24.0
 plugins:
   sources:
     - id: trunk
-      ref: v1.6.7
+      ref: v1.7.1
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - prettier@3.5.3
+    - checkov@3.2.450
-    - trufflehog@3.88.18
+    - renovate@41.29.1
-    - yamllint@1.37.0
+    - prettier@3.6.2
-    - bandit@1.8.3
+    - trufflehog@3.89.2
-    - checkov@3.2.394
+    - yamllint@1.37.1
-    - terrascan@1.19.9
+    - bandit@1.8.6
-    - trivy@0.60.0
+    - trivy@0.64.1
     - taplo@0.9.3
-    - ruff@0.11.2
+    - ruff@0.12.2
     - isort@6.0.1
-    - markdownlint@0.44.0
+    - markdownlint@0.45.0
-    - oxipng@9.1.4
+    - oxipng@9.1.5
-    - svgo@3.3.2
+    - svgo@4.0.0
     - actionlint@1.7.7
-    - flake8@7.1.2
+    - flake8@7.3.0
     - hadolint@2.12.1-beta
     - shfmt@3.6.0
     - shellcheck@0.10.0
     - black@25.1.0
     - git-diff-check
-    - gitleaks@8.24.2
+    - gitleaks@8.27.2
     - clang-format@16.0.3
   ignore:
     - linters: [ALL]
@@ -38,7 +38,7 @@ runtimes:
   enabled:
     - python@3.10.8
     - go@1.21.0
-    - node@18.20.5
+    - node@22.16.0
 actions:
   disabled:
     - trunk-announce

Dockerfile

@@ -1,20 +1,20 @@
-# trunk-ignore-all(terrascan/AC_DOCKER_0002): Known terrascan issue
 # trunk-ignore-all(trivy/DS002): We must run as root for this container
-# trunk-ignore-all(checkov/CKV_DOCKER_8): We must run as root for this container
 # trunk-ignore-all(hadolint/DL3002): We must run as root for this container
 # trunk-ignore-all(hadolint/DL3008): Do not pin apt package versions
 # trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
 
 FROM python:3.13-bookworm AS builder
+ARG PIO_ENV=native
 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Etc/UTC
 
 # Install Dependencies
 ENV PIP_ROOT_USER_ACTION=ignore
 RUN apt-get update && apt-get install --no-install-recommends -y \
-        wget g++ zip git ca-certificates \
+        curl wget g++ zip git ca-certificates pkg-config \
         libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev libuv1-dev \
-        libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev pkg-config \
+        libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev \
+        libx11-dev libinput-dev libxkbcommon-x11-dev \
     && apt-get clean && rm -rf /var/lib/apt/lists/* \
     && pip install --no-cache-dir -U platformio \
     && mkdir /tmp/firmware
@@ -24,13 +24,26 @@ WORKDIR /tmp/firmware
 COPY . /tmp/firmware
 
 # Build
-RUN bash ./bin/build-native.sh && \
+RUN bash ./bin/build-native.sh "$PIO_ENV" && \
     cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd"
 
+# Fetch web assets
+RUN curl -L "https://github.com/meshtastic/web/releases/download/v$(cat /tmp/firmware/bin/web.version)/build.tar" -o /tmp/web.tar \
+    && mkdir -p /tmp/web \
+    && tar -xf /tmp/web.tar -C /tmp/web/ \
+    && gzip -dr /tmp/web \
+    && rm /tmp/web.tar
 
 ##### PRODUCTION BUILD #############
 
 FROM debian:bookworm-slim
+LABEL org.opencontainers.image.title="Meshtastic" \
+      org.opencontainers.image.description="Debian Meshtastic daemon and web interface" \
+      org.opencontainers.image.url="https://meshtastic.org" \
+      org.opencontainers.image.documentation="https://meshtastic.org/docs/" \
+      org.opencontainers.image.authors="Meshtastic" \
+      org.opencontainers.image.licenses="GPL-3.0-or-later" \
+      org.opencontainers.image.source="https://github.com/meshtastic/firmware/"
 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Etc/UTC
 
@@ -38,14 +51,17 @@ ENV TZ=Etc/UTC
 USER root
 
 RUN apt-get update && apt-get --no-install-recommends -y install \
-        libc-bin libc6 libgpiod2 libyaml-cpp0.7 libi2c0 libuv1 libusb-1.0-0-dev liborcania2.3 libulfius2.7 libssl3 \
+        libc-bin libc6 libgpiod2 libyaml-cpp0.7 libi2c0 libuv1 libusb-1.0-0-dev \
+        liborcania2.3 libulfius2.7 libssl3 \
+        libx11-6 libinput10 libxkbcommon-x11-0 \
     && apt-get clean && rm -rf /var/lib/apt/lists/* \
     && mkdir -p /var/lib/meshtasticd \
     && mkdir -p /etc/meshtasticd/config.d \
     && mkdir -p /etc/meshtasticd/ssl
 
 # Fetch compiled binary from the builder
-COPY --from=builder /tmp/firmware/release/meshtasticd /usr/sbin/
+COPY --from=builder /tmp/firmware/release/meshtasticd /usr/bin/
+COPY --from=builder /tmp/web /usr/share/meshtasticd/
 # Copy config templates
 COPY ./bin/config.d /etc/meshtasticd/available.d
 
@@ -54,7 +70,9 @@ VOLUME /var/lib/meshtasticd
 
 # Expose Meshtastic TCP API port from the host
 EXPOSE 4403
+# Expose Meshtastic Web UI port from the host
+EXPOSE 9443
 
-CMD [ "sh", "-cx", "meshtasticd -d /var/lib/meshtasticd" ]
+CMD [ "sh", "-cx", "meshtasticd --fsdir=/var/lib/meshtasticd" ]
 
-HEALTHCHECK NONE
+HEALTHCHECK NONE

README.md

@@ -37,3 +37,4 @@ Join our community and help improve Meshtastic! 🚀
 ## Stats
 
 ![Alt](https://repobeats.axiom.co/api/embed/8025e56c482ec63541593cc5bd322c19d5c0bdcf.svg "Repobeats analytics image")
+

SECURITY.md

@@ -4,8 +4,8 @@
 
 | Firmware Version | Supported          |
 | ---------------- | ------------------ |
-| 2.5.x            | :white_check_mark: |
+| 2.6.x            | :white_check_mark: |
-| <= 2.4.x         | :x:                |
+| <= 2.5.x         | :x:                |
 
 ## Reporting a Vulnerability
 

alpine.Dockerfile

@@ -1,15 +1,16 @@
 # trunk-ignore-all(trivy/DS002): We must run as root for this container
-# trunk-ignore-all(checkov/CKV_DOCKER_8): We must run as root for this container
 # trunk-ignore-all(hadolint/DL3002): We must run as root for this container
 # trunk-ignore-all(hadolint/DL3018): Do not pin apk package versions
 # trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
 
-FROM python:3.13-alpine3.21 AS builder
+FROM python:3.13-alpine3.22 AS builder
-
+ARG PIO_ENV=native
 ENV PIP_ROOT_USER_ACTION=ignore
+
 RUN apk --no-cache add \
         bash g++ libstdc++-dev linux-headers zip git ca-certificates libgpiod-dev yaml-cpp-dev bluez-dev \
         libusb-dev i2c-tools-dev libuv-dev openssl-dev pkgconf argp-standalone \
+        libx11-dev libinput-dev libxkbcommon-dev \
     && rm -rf /var/cache/apk/* \
     && pip install --no-cache-dir -U platformio \
     && mkdir /tmp/firmware
@@ -21,23 +22,35 @@ COPY . /tmp/firmware
 # Add `argp` for musl
 ENV PLATFORMIO_BUILD_FLAGS="-Os -ffunction-sections -fdata-sections -Wl,--gc-sections -largp"
 
-RUN bash ./bin/build-native.sh && \
+RUN bash ./bin/build-native.sh "$PIO_ENV" && \
     cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd"
 
 # ##### PRODUCTION BUILD #############
 
-FROM alpine:3.21
+FROM alpine:3.22
+LABEL org.opencontainers.image.title="Meshtastic" \
+      org.opencontainers.image.description="Alpine Meshtastic daemon" \
+      org.opencontainers.image.url="https://meshtastic.org" \
+      org.opencontainers.image.documentation="https://meshtastic.org/docs/" \
+      org.opencontainers.image.authors="Meshtastic" \
+      org.opencontainers.image.licenses="GPL-3.0-or-later" \
+      org.opencontainers.image.source="https://github.com/meshtastic/firmware/"
 
 # nosemgrep: dockerfile.security.last-user-is-root.last-user-is-root
 USER root
 
 RUN apk --no-cache add \
-        libstdc++ libgpiod yaml-cpp libusb i2c-tools libuv \
+        shadow libstdc++ libgpiod yaml-cpp libusb i2c-tools libuv \
+        libx11 libinput libxkbcommon \
     && rm -rf /var/cache/apk/* \
     && mkdir -p /var/lib/meshtasticd \
     && mkdir -p /etc/meshtasticd/config.d \
     && mkdir -p /etc/meshtasticd/ssl
-COPY --from=builder /tmp/firmware/release/meshtasticd /usr/sbin/
+
+# Fetch compiled binary from the builder
+COPY --from=builder /tmp/firmware/release/meshtasticd /usr/bin/
+# Copy config templates
+COPY ./bin/config.d /etc/meshtasticd/available.d
 
 WORKDIR /var/lib/meshtasticd
 VOLUME /var/lib/meshtasticd

arch/esp32/esp32.ini

@@ -2,7 +2,9 @@
 [esp32_base]
 extends = arduino_base
 custom_esp32_kind = esp32
-platform = platformio/espressif32@6.10.0
+platform =
+  # renovate: datasource=custom.pio depName=platformio/espressif32 packageName=platformio/platform/espressif32
+  platformio/espressif32@6.11.0
 
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
@@ -44,13 +46,20 @@ lib_deps =
   ${arduino_base.lib_deps}
   ${networking_base.lib_deps}
   ${environmental_base.lib_deps}
+  ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
-  https://github.com/meshtastic/esp32_https_server/archive/23665b3adc080a311dcbb586ed5941b5f94d6ea2.zip
+  # renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
+  https://github.com/meshtastic/esp32_https_server/archive/3223704846752e6d545139204837bdb2a55459ca.zip
+  # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
   h2zero/NimBLE-Arduino@^1.4.3
+  # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
   https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
-  lewisxhe/XPowersLib@^0.2.7
+  # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
+  lewisxhe/XPowersLib@0.3.0
+  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
-  rweather/Crypto@^0.4.0
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0
 
 lib_ignore = 
   segger_rtt

arch/esp32/esp32c6.ini

@@ -1,6 +1,8 @@
 [esp32c6_base]
 extends = esp32_base
-platform = https://github.com/Jason2866/platform-espressif32/archive/22faa566df8c789000f8136cd8d0aca49617af55.zip
+platform =
+  # Do not renovate until we have switched to pioarduino tagged builds
+  https://github.com/Jason2866/platform-espressif32/archive/22faa566df8c789000f8136cd8d0aca49617af55.zip
 build_flags =
   ${arduino_base.build_flags}
   -Wall
@@ -23,10 +25,14 @@ lib_deps =
   ${arduino_base.lib_deps}
   ${networking_base.lib_deps}
   ${environmental_base.lib_deps}
+  ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
-  lewisxhe/XPowersLib@^0.2.7
+  # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
+  lewisxhe/XPowersLib@0.3.0
+  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
-  rweather/Crypto@^0.4.0
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0
 
 build_src_filter = 
  ${esp32_base.build_src_filter} -<mesh/http> 

arch/esp32/esp32s2.ini

@@ -16,4 +16,4 @@ build_flags =
 lib_ignore = 
   ${esp32_base.lib_ignore} 
   NimBLE-Arduino
-  libpax
+  libpax

arch/esp32/esp32s3.ini

@@ -3,4 +3,3 @@ extends = esp32_base
 custom_esp32_kind = esp32s3
 
 monitor_speed = 115200
-

arch/nrf52/nrf52.ini

@@ -1,10 +1,14 @@
 [nrf52_base]
 ; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files
-platform = platformio/nordicnrf52@^10.8.0
+platform =
+  # renovate: datasource=custom.pio depName=platformio/nordicnrf52 packageName=platformio/platform/nordicnrf52
+  platformio/nordicnrf52@^10.8.0
 extends = arduino_base
 platform_packages =
   ; our custom Git version until they merge our PR
+  # TODO renovate
   platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino#e13f5820002a4fb2a5e6754b42ace185277e5adf
+  ; Don't renovate toolchain-gccarmnoneeabi
   platformio/toolchain-gccarmnoneeabi@~1.90301.0
 
 build_type = debug
@@ -24,8 +28,9 @@ build_src_filter =
 lib_deps=
   ${arduino_base.lib_deps}
   ${radiolib_base.lib_deps}
-  rweather/Crypto@^0.4.0
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0
 
 lib_ignore =
   BluetoothOTA
-  lvgl
+  lvgl

arch/nrf52/nrf52840.ini

@@ -6,7 +6,9 @@ build_flags = ${nrf52_base.build_flags}
 lib_deps =
   ${nrf52_base.lib_deps}
   ${environmental_base.lib_deps}
-  https://github.com/Kongduino/Adafruit_nRFCrypto/archive/e31a8825ea3300b163a0a3c1ddd5de34e10e1371.zip
+  ${environmental_extra.lib_deps}
+  # renovate: datasource=git-refs depName=Kongduino-Adafruit_nRFCrypto packageName=https://github.com/Kongduino/Adafruit_nRFCrypto gitBranch=master
+  https://github.com/Kongduino/Adafruit_nRFCrypto/archive/5f838d2709461a2c981f642917aa50254a25c14c.zip
 
 ; Common NRF52 debugging settings follow.  See the Meshtastic developer docs for how to connect SWD debugging probes to your board.
 

arch/portduino/portduino.ini

@@ -1,6 +1,8 @@
 ; The Portduino based 'native' environment. Currently supported on Linux targets with real LoRa hardware (or simulated).
 [portduino_base]
-platform = https://github.com/meshtastic/platform-native/archive/c5bd469ab9b5a6966321e09557b27d906961da63.zip
+platform =
+  # renovate: datasource=git-refs depName=platform-native packageName=https://github.com/meshtastic/platform-native gitBranch=develop
+  https://github.com/meshtastic/platform-native/archive/6cb7a455b440dd0738e8ed74a18136ed5cf7ea63.zip
 framework = arduino
 
 build_src_filter = 
@@ -15,18 +17,21 @@ build_src_filter =
   +<mesh/raspihttp/>
   -<mesh/eth/>
   -<modules/esp32>
-  -<modules/Telemetry/EnvironmentTelemetry.cpp>
-  -<modules/Telemetry/AirQualityTelemetry.cpp>
-  -<modules/Telemetry/Sensor>
   +<../variants/portduino>
 
 lib_deps =
   ${env.lib_deps}
   ${networking_base.lib_deps}
   ${radiolib_base.lib_deps}
-  rweather/Crypto@^0.4.0
+  ${environmental_base.lib_deps}
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
   lovyan03/LovyanGFX@^1.2.0
-  https://github.com/pine64/libch341-spi-userspace/archive/a9b17e3452f7fb747000d9b4ad4409155b39f6ef.zip
+  # renovate: datasource=git-refs depName=libch341-spi-userspace packageName=https://github.com/pine64/libch341-spi-userspace gitBranch=main
+  https://github.com/pine64/libch341-spi-userspace/archive/af9bc27c9c30fa90772279925b7c5913dff789b4.zip
+  # renovate: datasource=custom.pio depName=adafruit/Adafruit seesaw Library packageName=adafruit/library/Adafruit seesaw Library
+	adafruit/Adafruit seesaw Library@1.7.9
 
 build_flags =
   ${arduino_base.build_flags}
@@ -43,4 +48,10 @@ build_flags =
   -lyaml-cpp
   -li2c
   -luv
+  -std=gnu17
   -std=c++17
+
+lib_ignore =
+  Adafruit NeoPixel
+  Adafruit ST7735 and ST7789 Library
+  SD

arch/rp2xx0/rp2040.ini

@@ -1,8 +1,13 @@
 ; Common settings for rp2040 Processor based targets
 [rp2040_base]
-platform = https://github.com/maxgerhardt/platform-raspberrypi#76ecf3c7e9dd4503af0331154c4ca1cddc4b03e5 ; For arduino-pico >= 4.4.3
+platform =
+  # TODO renovate
+  https://github.com/maxgerhardt/platform-raspberrypi#76ecf3c7e9dd4503af0331154c4ca1cddc4b03e5
+  ; For arduino-pico >= 4.4.3
 extends = arduino_base
-platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico#4.4.3
+platform_packages =
+  # TODO renovate
+  framework-arduinopico@https://github.com/earlephilhower/arduino-pico#4.4.3
 
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
@@ -23,5 +28,7 @@ lib_ignore =
 lib_deps =
   ${arduino_base.lib_deps}
   ${environmental_base.lib_deps}
+  ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
-  rweather/Crypto
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0

arch/rp2xx0/rp2350.ini

@@ -1,8 +1,13 @@
-; Common settings for rp2040 Processor based targets
+; Common settings for rp2350 Processor based targets
 [rp2350_base]
-platform = https://github.com/maxgerhardt/platform-raspberrypi#76ecf3c7e9dd4503af0331154c4ca1cddc4b03e5 ; For arduino-pico >= 4.4.3
+platform =
+  # TODO renovate
+  https://github.com/maxgerhardt/platform-raspberrypi#76ecf3c7e9dd4503af0331154c4ca1cddc4b03e5
+  ; For arduino-pico >= 4.4.3
 extends = arduino_base
-platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico#4.4.3
+platform_packages =
+  # TODO renovate
+  framework-arduinopico@https://github.com/earlephilhower/arduino-pico#4.4.3
 
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
@@ -20,5 +25,7 @@ lib_ignore =
 lib_deps =
   ${arduino_base.lib_deps}
   ${environmental_base.lib_deps}
+  ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
-  rweather/Crypto
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0

arch/stm32/stm32.ini

@@ -1,7 +1,11 @@
 [stm32_base]
 extends = arduino_base
-platform = ststm32
+platform =
-platform_packages = platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32/archive/2.10.1.zip
+  # renovate: datasource=custom.pio depName=platformio/ststm32 packageName=platformio/platform/ststm32
+  platformio/ststm32@19.2.0
+platform_packages =
+  # TODO renovate
+  platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32/archive/2.10.1.zip
 extra_scripts =
   ${env.extra_scripts}
   post:extra_scripts/extra_stm32.py
@@ -12,14 +16,17 @@ build_flags =
   ${arduino_base.build_flags}
   -flto
   -Isrc/platform/stm32wl -g
-  -DMESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
+  -DMESHTASTIC_EXCLUDE_AUDIO=1
-  -DMESHTASTIC_EXCLUDE_INPUTBROKER
+  -DMESHTASTIC_EXCLUDE_ATAK=1 ; ATAK is quite big, disable it for big flash savings.
-  -DMESHTASTIC_EXCLUDE_I2C
+  -DMESHTASTIC_EXCLUDE_INPUTBROKER=1
-  -DMESHTASTIC_EXCLUDE_POWERMON
+  -DMESHTASTIC_EXCLUDE_POWERMON=1
-  -DMESHTASTIC_EXCLUDE_SCREEN
+  -DMESHTASTIC_EXCLUDE_SCREEN=1
-  -DMESHTASTIC_EXCLUDE_MQTT
+  -DMESHTASTIC_EXCLUDE_MQTT=1
-  -DMESHTASTIC_EXCLUDE_BLUETOOTH
+  -DMESHTASTIC_EXCLUDE_BLUETOOTH=1
-  -DMESHTASTIC_EXCLUDE_GPS
+  -DMESHTASTIC_EXCLUDE_GPS=1
+  -DMESHTASTIC_EXCLUDE_WIFI=1
+  -DMESHTASTIC_EXCLUDE_TZ=1 ; Exclude TZ to save some flash space.
+  -DPIO_FRAMEWORK_ARDUINO_NANOLIB_FLOAT_PRINTF ; This is REQUIRED for at least traceroute debug prints - without it the length ends up uninitialized.
   ;-DDEBUG_MUTE
   -fmerge-all-constants
   -ffunction-sections
@@ -35,8 +42,9 @@ debug_tool = stlink
 lib_deps =
   ${env.lib_deps}
   ${radiolib_base.lib_deps}
+
+  # renovate: datasource=git-refs depName=caveman99-stm32-Crypto packageName=https://github.com/caveman99/Crypto gitBranch=main
   https://github.com/caveman99/Crypto/archive/eae9c768054118a9399690f8af202853d1ae8516.zip
 
 lib_ignore =
-  mathertel/OneButton@2.6.1
+  OneButton
-  Wire

bin/99-meshtasticd-udev.rules

@@ -0,0 +1,7 @@
+# Set spidev ownership to 'spi' group
+SUBSYSTEM=="spidev", KERNEL=="spidev*", GROUP="spi", MODE="0660"
+# Allow access to USB CH341 devices
+SUBSYSTEM=="usb", ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="5512", MODE="0666"
+# Set gpio ownership to 'gpio' group
+SUBSYSTEM=="*gpiomem*", GROUP="gpio", MODE="0660"
+SUBSYSTEM=="gpio", GROUP="gpio", MODE="0660"

bin/build-esp32.sh

@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update -e $1
+platformio pkg install -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*
@@ -34,11 +34,12 @@ SRCBIN=.pio/build/$1/firmware.bin
 cp $SRCBIN $OUTDIR/$basename-update.bin
 
 echo "Building Filesystem for ESP32 targets"
-pio run --environment $1 -t buildfs
+# If you want to build the webui, uncomment the following lines
-cp .pio/build/$1/littlefs.bin $OUTDIR/littlefswebui-$1-$VERSION.bin
+# pio run --environment $1 -t buildfs
-# Remove webserver files from the filesystem and rebuild
+# cp .pio/build/$1/littlefs.bin $OUTDIR/littlefswebui-$1-$VERSION.bin
-ls -l data/static # Diagnostic list of files
+# # Remove webserver files from the filesystem and rebuild
-rm -rf data/static
+# ls -l data/static # Diagnostic list of files
+# rm -rf data/static
 pio run --environment $1 -t buildfs
 cp .pio/build/$1/littlefs.bin $OUTDIR/littlefs-$1-$VERSION.bin
 cp bin/device-install.* $OUTDIR

bin/build-native.sh

@@ -15,6 +15,7 @@ platformioFailed() {
 
 VERSION=$(bin/buildinfo.py long)
 SHORT_VERSION=$(bin/buildinfo.py short)
+PIO_ENV=${1:-native}
 
 OUTDIR=release/
 
@@ -24,7 +25,7 @@ mkdir -p $OUTDIR/
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-pio pkg update --environment native || platformioFailed
+pio pkg install --environment "$PIO_ENV" || platformioFailed
-pio run --environment native || platformioFailed
+pio run --environment "$PIO_ENV" || platformioFailed
-cp .pio/build/native/program "$OUTDIR/meshtasticd_linux_$(uname -m)"
+cp ".pio/build/$PIO_ENV/program" "$OUTDIR/meshtasticd_linux_$(uname -m)"
 cp bin/native-install.* $OUTDIR

bin/build-nrf52.sh

@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update -e $1
+platformio pkg install -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*

bin/build-rp2xx0.sh

@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update -e $1
+platformio pkg install -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*

bin/build-stm32wl.sh

@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update -e $1
+platformio pkg install -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*

bin/bump_metainfo/bump_metainfo.py

@@ -0,0 +1,72 @@
+#!/usr/bin/env python3
+import argparse
+import xml.etree.ElementTree as ET
+from defusedxml.ElementTree import parse
+from datetime import datetime, timezone
+
+
+# Indent by 2 spaces to align with xml formatting.
+def indent(elem, level=0):
+    i = "\n" + level * "  "
+    if len(elem):
+        if not elem.text or not elem.text.strip():
+            elem.text = i + "  "
+        for child in elem:
+            indent(child, level + 1)
+        if not child.tail or not child.tail.strip():
+            child.tail = i
+    if level and (not elem.tail or not elem.tail.strip()):
+        elem.tail = i
+
+
+def main():
+    parser = argparse.ArgumentParser(
+        description="Prepend new release entry to metainfo.xml file.")
+    parser.add_argument("--file", help="Path to the metainfo.xml file",
+                        default="org.meshtastic.meshtasticd.metainfo.xml")
+    parser.add_argument("version", help="Version string (e.g. 2.6.4)")
+    parser.add_argument("--date", help="Release date (YYYY-MM-DD), defaults to today",
+                        default=datetime.now(timezone.utc).date().isoformat())
+
+    args = parser.parse_args()
+
+    tree = parse(args.file)
+    root = tree.getroot()
+
+    releases = root.find('releases')
+    if releases is None:
+        raise RuntimeError("<releases> element not found in XML.")
+
+    existing_versions = {
+        release.get('version'): release
+        for release in releases.findall('release')
+    }
+    existing_release = existing_versions.get(args.version)
+
+    if existing_release is not None:
+        if not existing_release.get('date'):
+            print(f"Version {args.version} found without date. Adding date...")
+            existing_release.set('date', args.date)
+        else:
+            print(
+                f"Version {args.version} is already present with date, skipping insertion.")
+    else:
+        new_release = ET.Element('release', {
+            'version': args.version,
+            'date': args.date
+        })
+        url = ET.SubElement(new_release, 'url', {'type': 'details'})
+        url.text = f"https://github.com/meshtastic/firmware/releases?q=tag%3Av{args.version}"
+
+        releases.insert(0, new_release)
+
+        indent(releases, level=1)
+        releases.tail = "\n"
+
+        print(f"Inserted new release: {args.version}")
+
+    tree.write(args.file, encoding='UTF-8', xml_declaration=True)
+
+
+if __name__ == "__main__":
+    main()

bin/bump_metainfo/requirements.txt

@@ -0,0 +1 @@
+defusedxml==0.7.1

bin/check-all.sh

@@ -23,4 +23,4 @@ for BOARD in $BOARDS; do
 	CHECK="${CHECK} -e ${BOARD}"
 done
 
-pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt" $CHECK --skip-packages --pattern="src/" --fail-on-defect=medium --fail-on-defect=high
+pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt --inline-suppr" $CHECK --skip-packages --pattern="src/" --fail-on-defect=medium --fail-on-defect=high

bin/config-dist.yaml

@@ -96,9 +96,9 @@ Lora:
 ### Some devices, like the pinedio, may require spidev0.1 as a workaround.
 #  spidev: spidev0.0
 
-### Define GPIO buttons here:
+### Deprecated location for User Button:
 
-GPIO:
+#GPIO:
 #  User: 6
 
 ### Define GPS
@@ -115,17 +115,6 @@ I2C:
 
 Display:
 
-### Waveshare 1.44inch LCD HAT
-#  Panel: ST7735S
-#  CS: 8         #Chip Select
-#  DC: 25        # Data/Command pin
-#  Backlight: 24
-#  Width: 128
-#  Height: 128
-#  Reset: 27
-#  OffsetX: 0
-#  OffsetY: 0
-
 ### Adafruit PiTFT 2.8 TFT+Touchscreen
 #  Panel: ILI9341
 #  CS: 8
@@ -180,6 +169,16 @@ Input:
 
 #  KeyboardDevice: /dev/input/by-id/usb-_Raspberry_Pi_Internal_Keyboard-event-kbd
 
+### Standard User Button Config
+#  UserButton: 6
+
+### Trackball/Joystick input
+#  TrackballUp: 6
+#  TrackballDown: 19
+#  TrackballLeft: 5
+#  TrackballRight: 26
+#  TrackballPress: 13
+
 ###
 
 Logging:
@@ -188,14 +187,26 @@ Logging:
 #  AsciiLogs: true     # default if not specified is !isatty() on stdout
 
 Webserver:
-#  Port: 443 # Port for Webserver & Webservices
+#  Port: 9443 # Port for Webserver & Webservices
 #  RootPath: /usr/share/meshtasticd/web # Root Dir of WebServer
 #  SSLKey: /etc/meshtasticd/ssl/private_key.pem # Path to SSL Key, generated if not present
 #  SSLCert: /etc/meshtasticd/ssl/certificate.pem # Path to SSL Certificate, generated if not present
 
+
+HostMetrics:
+#  ReportInterval: 30 # Interval in minutes between HostMetrics report packets, or 0 for disabled
+#  Channel: 0 # channel to send Host Metrics over. Defaults to the primary channel.
+#  UserStringCommand: cat /sys/firmware/devicetree/base/serial-number # Command to execute, to send the results as the userString
+
+
+Config:
+#  DisplayMode: TWOCOLOR # uncomment to force BaseUI
+#  DisplayMode: COLOR # uncomment to force MUI
+
 General:
   MaxNodes: 200
   MaxMessageQueue: 100
   ConfigDirectory: /etc/meshtasticd/config.d/
+  AvailableDirectory: /etc/meshtasticd/available.d/
 #  MACAddress: AA:BB:CC:DD:EE:FF
-#  MACAddressSource: eth0
+#  MACAddressSource: eth0

bin/config.d/display-waveshare-1-44.yaml

@@ -0,0 +1,26 @@
+### Waveshare 1.44inch LCD HAT
+Display:
+  Panel: ST7735S
+  spidev: spidev0.0  # Specify either the spidev here, or the CS below
+#  CS: 8         #Chip Select # Optional, as this is the default pin for spidev0.0
+  DC: 25        # Data/Command pin
+  Backlight: 24
+  Width: 128
+  Height: 128
+  Reset: 27
+  OffsetX: 2
+  OffsetY: 1
+
+
+#  OffsetY: 31  # These two options are used to properly flip the screen 180 degrees
+#  OffsetRotate: 3
+
+
+Input:
+  TrackballUp: 6
+  TrackballDown: 19
+  TrackballLeft: 5
+  TrackballRight: 26
+  TrackballPress: 13
+  TrackballDirection: FALLING
+#  User: 21

bin/config.d/lora-MeshAdv-900M30S.yaml

@@ -1,3 +1,5 @@
+# MeshAdv-Pi E22-900M30S
+# https://github.com/chrismyers2000/MeshAdv-Pi-Hat
 Lora:
   Module: sx1262
   CS: 21
@@ -9,4 +11,4 @@ Lora:
   DIO3_TCXO_VOLTAGE: true
   # Only for E22-900M33S:
   # Limit the output power to 8 dBm
-  # SX126X_MAX_POWER: 8
+  # SX126X_MAX_POWER: 8

bin/config.d/lora-MeshAdv-Mini-900M22S.yaml

@@ -0,0 +1,11 @@
+# MeshAdv Mini E22-900M22S
+# https://github.com/chrismyers2000/MeshAdv-Mini
+Lora:
+  Module: sx1262  # Ebyte E22-900M22S 
+  CS: 8
+  IRQ: 16
+  Busy: 20
+  Reset: 24
+  RXen: 12
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true

bin/config.d/lora-RAK6421.yaml

@@ -0,0 +1,21 @@
+Lora:
+
+  ### RAK13300in Slot 1
+  Module: sx1262
+  IRQ: 22 #IO6
+  Reset: 16 # IO4
+  Busy: 24 # IO5
+  # Ant_sw: 13 # IO3 
+  DIO3_TCXO_VOLTAGE: true
+  DIO2_AS_RF_SWITCH: true
+  spidev: spidev0.0
+  # CS: 8
+
+
+  ### RAK13300in Slot 2 pins
+#  IRQ: 18 #IO6
+#  Reset: 24 # IO4
+#  Busy: 19 # IO5
+#  # Ant_sw: 23 # IO3 
+#  spidev: spidev0.1
+#  # CS: 7

bin/config.d/lora-lyra-picocalc-wio-sx1262.yaml

@@ -0,0 +1,18 @@
+Lora:
+  Module: sx1262
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  gpiochip: 0
+  MOSI: 12
+  MISO: 13
+  IRQ: 1
+  Busy: 23
+  Reset: 22
+  RXen: 0
+  gpiochip: 1
+  CS: 9
+  SCK: 11
+#  TXen: bridge to DIO2 on E22 module
+  SX126X_MAX_POWER: 22
+  spidev: spidev1.0
+  spiSpeed: 2000000

bin/config.d/lora-piggystick-lr1121.yaml

@@ -0,0 +1,11 @@
+Lora:
+  Module: lr1121
+  CS: 0
+  IRQ: 6
+  Reset: 2
+  Busy: 4
+  spidev: ch341
+  DIO3_TCXO_VOLTAGE: 1.8
+#  USB_Serialnum: 12345678
+  USB_PID: 0x5512
+  USB_VID: 0x1A86

bin/config.d/lora-ws-raspberry-pico-to-orangepi-03.yaml

@@ -0,0 +1,52 @@
+# https://www.waveshare.com/pico-lora-sx1262-868m.htm
+# http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-3.html
+#
+# See Orange Pi Zero3 manual, chapter 3.16, page 124 for 26-pin header pinout
+#
+# Pin Connection
+# Waveshare       Orange Pi Zero3
+#   36    3.3V        17
+#   15    MOSI        19
+#   16    MISO        21  
+#   14    CLK         23
+#   38    GND         25
+#   4     BUSY        18
+#   20    RESET       22
+#   5     CS          24
+#   26    DIO1/IRQ    26
+
+Lora:
+  Module: sx1262  # Waveshare Raspberry Pico Lora module
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  # Specify either the spidev1_1 or the CS below, not both!
+  # On DietPi Linux, when using the user overlay dietpi-spi1_1.dtbo, CS will be configured with spidev1.1
+  spidev: spidev1.1 # See Orange Pi Zero3 manual, chapter 3.18.3, page 130
+#  CS:             # CS     PIN_24 -> chip 1, line 233
+#    pin: 24
+#    gpiochip: 1
+#    line: 233
+  SCK:            # SCK     PIN_23 -> chip 1, line 230
+    pin: 23
+    gpiochip: 1
+    line: 230
+  Busy:           # BUSY    PIN_18 -> chip 1, line 78
+    pin: 18
+    gpiochip: 1
+    line: 78
+  MOSI:           # MOSI    PIN_19 -> chip 1, line 231
+    pin: 19
+    gpiochip: 1
+    line: 231
+  MISO:           # MISO    PIN_21 -> chip 1, line 232
+    pin: 21
+    gpiochip: 1
+    line: 232
+  Reset:          # NRST    PIN_22 -> chip 1, line 71
+    pin: 22
+    gpiochip: 1
+    line: 71
+  IRQ:            # DIO1    PIN_26 -> chip 1, line 74
+    pin: 26
+    gpiochip: 1
+    line: 74

bin/device-install.bat

@@ -5,26 +5,26 @@ TITLE Meshtastic device-install
 SET "SCRIPT_NAME=%~nx0"
 SET "DEBUG=0"
 SET "PYTHON="
-SET "WEB_APP=0"
 SET "TFT_BUILD=0"
 SET "BIGDB8=0"
 SET "BIGDB16=0"
 SET "ESPTOOL_BAUD=115200"
 SET "ESPTOOL_CMD="
 SET "LOGCOUNTER=0"
+SET "BPS_RESET=0"
 
 @REM FIXME: Determine mcu from PlatformIO variant, this is unmaintainable.
 SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone"
 SET "C3=esp32c3"
 @REM FIXME: Determine flash size from PlatformIO variant, this is unmaintainable.
-SET "BIGDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core t-watch-s3 tracksenger"
+SET "BIGDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core tracksenger"
-SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite"
+SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite t-watch-s3"
 
 GOTO getopts
 :help
 ECHO Flash image file to device, but first erasing and writing system information.
 ECHO.
-ECHO Usage: %SCRIPT_NAME% -f filename [-p PORT] [-P python] (--web)
+ECHO Usage: %SCRIPT_NAME% -f filename [-p PORT] [-P python] [--1200bps-reset]
 ECHO.
 ECHO Options:
 ECHO     -f filename      The firmware .bin file to flash.  Custom to your device type and region. (required)
@@ -34,14 +34,16 @@ ECHO                      If not set, ESPTOOL iterates all ports (Dangerous).
 ECHO     -P python        Specify alternate python interpreter to use to invoke esptool. (default: python)
 ECHO                      If supplied the script will use python.
 ECHO                      If not supplied the script will try to find esptool in Path.
-ECHO     --web            Enable WebUI. (default: false)
+ECHO     --1200bps-reset  Attempt to place the device in correct mode. (1200bps Reset)
+ECHO                      Some hardware requires this twice.
 ECHO.
+ECHO Example: %SCRIPT_NAME% -p COM17 --1200bps-reset
 ECHO Example: %SCRIPT_NAME% -f firmware-t-deck-tft-2.6.0.0b106d4.bin -p COM11
-ECHO Example: %SCRIPT_NAME% -f firmware-unphone-2.6.0.0b106d4.bin -p COM11 --web
+ECHO Example: %SCRIPT_NAME% -f firmware-unphone-2.6.0.0b106d4.bin -p COM11
 GOTO eof
 
 :version
-ECHO %SCRIPT_NAME% [Version 2.6.1]
+ECHO %SCRIPT_NAME% [Version 2.6.2]
 ECHO Meshtastic
 GOTO eof
 
@@ -57,11 +59,13 @@ IF /I "%~1"=="-f" SET "FILENAME=%~2" & SHIFT
 IF "%~1"=="-p" SET "ESPTOOL_PORT=%~2" & SHIFT
 IF /I "%~1"=="--port" SET "ESPTOOL_PORT=%~2" & SHIFT
 IF "%~1"=="-P" SET "PYTHON=%~2" & SHIFT
-IF /I "%~1"=="--web" SET "WEB_APP=1"
+IF /I "%~1"=="--1200bps-reset" SET "BPS_RESET=1"
 SHIFT
 GOTO getopts
 :endopts
 
+IF %BPS_RESET% EQU 1 GOTO skip-filename
+
 CALL :LOG_MESSAGE DEBUG "Checking FILENAME parameter..."
 IF "__!FILENAME!__"=="____" (
     CALL :LOG_MESSAGE DEBUG "Missing -f filename input."
@@ -95,6 +99,9 @@ IF NOT "!FILENAME:update=!"=="!FILENAME!" (
     CALL :LOG_MESSAGE DEBUG "We are NOT working with a *update* file. !FILENAME!"
 )
 
+:skip-filename
+SET "ESPTOOL_BAUD=1200"
+
 CALL :LOG_MESSAGE DEBUG "Determine the correct esptool command to use..."
 IF NOT "__%PYTHON%__"=="____" (
     SET "ESPTOOL_CMD=!PYTHON! -m esptool"
@@ -133,13 +140,16 @@ IF "__!ESPTOOL_PORT!__" == "____" (
 )
 CALL :LOG_MESSAGE INFO "Using esptool baud: !ESPTOOL_BAUD!."
 
+IF %BPS_RESET% EQU 1 (
+    @REM Attempt to change mode via 1200bps Reset.
+    CALL :RUN_ESPTOOL !ESPTOOL_BAUD! --after no_reset read_flash_status
+    GOTO eof
+)
+
 @REM Check if FILENAME contains "-tft-" and set target partitionScheme accordingly.
 @REM https://github.com/meshtastic/web-flasher/blob/main/types/resources.ts#L3
 IF NOT "!FILENAME:-tft-=!"=="!FILENAME!" (
     CALL :LOG_MESSAGE DEBUG "We are working with a *-tft-* file. !FILENAME!"
-    IF %WEB_APP% EQU 1 (
-        CALL :LOG_MESSAGE ERROR "Cannot enable WebUI (--web) and MUI." & GOTO eof
-    )
     SET "TFT_BUILD=1"
 ) ELSE (
     CALL :LOG_MESSAGE DEBUG "We are NOT working with a *-tft-* file. !FILENAME!"
@@ -193,13 +203,8 @@ SET "OTA_FILENAME=bleota.bin"
 :end_loop_c3
 CALL :LOG_MESSAGE DEBUG "Set OTA_FILENAME to: !OTA_FILENAME!"
 
-@REM Check if (--web) is enabled and prefix BASENAME with "littlefswebui-" else "littlefs-".
+@REM Set SPIFFS filename with "littlefs-" prefix.
-IF %WEB_APP% EQU 1 (
+SET "SPIFFS_FILENAME=littlefs-%BASENAME%"
-    CALL :LOG_MESSAGE INFO "WebUI selected."
-    SET "SPIFFS_FILENAME=littlefswebui-%BASENAME%"
-) ELSE (
-    SET "SPIFFS_FILENAME=littlefs-%BASENAME%"
-)
 CALL :LOG_MESSAGE DEBUG "Set SPIFFS_FILENAME to: !SPIFFS_FILENAME!"
 
 @REM Default offsets.
@@ -254,6 +259,7 @@ EXIT /B %ERRORLEVEL%
 IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
 CALL :RESET_ERROR
 !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4
+IF %BPS_RESET% EQU 1 GOTO :eof
 IF %ERRORLEVEL% NEQ 0 (
     CALL :LOG_MESSAGE ERROR "Error running command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
     EXIT /B %ERRORLEVEL%

bin/device-install.sh

@@ -1,7 +1,7 @@
 #!/bin/bash
 
 PYTHON=${PYTHON:-$(which python3 python | head -n 1)}
-WEB_APP=false
+BPS_RESET=false
 TFT_BUILD=false
 MCU=""
 
@@ -22,7 +22,6 @@ BIGDB_8MB=(
 	"icarus"
 	"seeed-xiao-s3"
 	"tbeam-s3-core"
-	"t-watch-s3"
 	"tracksenger"
 )
 BIGDB_16MB=(
@@ -33,174 +32,185 @@ BIGDB_16MB=(
 	"ESP32-S3-Pico"
 	"m5stack-cores3"
 	"station-g2"
-	"t-eth-elite"
+    "t-eth-elite"
+    "t-watch-s3"
+    "elecrow-adv-35-tft"
+    "elecrow-adv-24-28-tft"
+    "elecrow-adv1-43-50-70-tft"
 )
 S3_VARIANTS=(
-	"s3"
+    "s3"
-	"-v3"
+    "-v3"
-	"t-deck"
+    "t-deck"
-	"wireless-paper"
+    "wireless-paper"
-	"wireless-tracker"
+    "wireless-tracker"
-	"station-g2"
+    "station-g2"
-	"unphone"
+    "unphone"
+    "t-eth-elite"
+    "mesh-tab"
+    "dreamcatcher"
+    "ESP32-S3-Pico"
+    "seeed-sensecap-indicator"
+    "heltec_capsule_sensor_v3"
+    "vision-master"
+    "icarus"
+    "tracksenger"
+    "elecrow-adv"
 )
 
 # Determine the correct esptool command to use
 if "$PYTHON" -m esptool version >/dev/null 2>&1; then
-	ESPTOOL_CMD="$PYTHON -m esptool"
+    ESPTOOL_CMD="$PYTHON -m esptool"
 elif command -v esptool >/dev/null 2>&1; then
-	ESPTOOL_CMD="esptool"
+    ESPTOOL_CMD="esptool"
 elif command -v esptool.py >/dev/null 2>&1; then
-	ESPTOOL_CMD="esptool.py"
+    ESPTOOL_CMD="esptool.py"
 else
-	echo "Error: esptool not found"
+    echo "Error: esptool not found"
-	exit 1
+    exit 1
 fi
 
 set -e
 
 # Usage info
 show_help() {
-	cat <<EOF
+    cat <<EOF
-Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME] [--web]
+Usage: $(basename "$0") [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME] [--1200bps-reset]
 Flash image file to device, but first erasing and writing system information.
 
     -h               Display this help and exit.
     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
     -f FILENAME      The firmware .bin file to flash.  Custom to your device type and region.
-    --web            Enable WebUI. (Default: false)
+    --1200bps-reset  Attempt to place the device in correct mode. Some hardware requires this twice. (1200bps Reset)
 
 EOF
 }
 # Parse arguments using a single while loop
 while [ $# -gt 0 ]; do
-	case "$1" in
+    case "$1" in
-	-h | --help)
+    -h | --help)
-		show_help
+        show_help
-		exit 0
+        exit 0
-		;;
+        ;;
-	-p)
+    -p)
-		ESPTOOL_CMD="$ESPTOOL_CMD --port $2"
+        ESPTOOL_CMD="$ESPTOOL_CMD --port $2"
-		shift
+        shift
-		;;
+        ;;
-	-P)
+    -P)
-		PYTHON="$2"
+        PYTHON="$2"
-		shift
+        shift
-		;;
+        ;;
-	-f)
+    -f)
-		FILENAME="$2"
+        FILENAME="$2"
-		shift
+        shift
-		;;
+        ;;
-	--web)
+    --1200bps-reset)
-		WEB_APP=true
+		    BPS_RESET=true
-		;;
+		    ;;
-	--) # Stop parsing options
+    --) # Stop parsing options
-		shift
+        shift
-		break
+        break
-		;;
+        ;;
-	*)
+    *)
-		echo "Unknown argument: $1" >&2
+        echo "Unknown argument: $1" >&2
-		exit 1
+        exit 1
-		;;
+        ;;
-	esac
+    esac
-	shift # Move to the next argument
+    shift # Move to the next argument
 done
 
-[ -z "$FILENAME" -a -n "$1" ] && {
+if [[ $BPS_RESET == true ]]; then
-	FILENAME=$1
+	$ESPTOOL_CMD --baud 1200 --after no_reset read_flash_status
-	shift
+	exit 0
+fi
+
+[ -z "$FILENAME" ] && [ -n "$1" ] && {
+    FILENAME="$1"
+    shift
 }
 
-if [[ $FILENAME != firmware-* ]]; then
+if [[ "$FILENAME" != firmware-* ]]; then
   echo "Filename must be a firmware-* file."
   exit 1
 fi
 
-# Check if FILENAME contains "-tft-" and prevent web/mui comingling.
+# Check if FILENAME contains "-tft-" and set target partitionScheme accordingly.
-if [[ ${FILENAME//-tft-/} != "$FILENAME" ]]; then
+if [[ "${FILENAME//-tft-/}" != "$FILENAME" ]]; then
-	TFT_BUILD=true
+    TFT_BUILD=true
-	if [[ $WEB_APP == true ]] && [[ $TFT_BUILD == true ]]; then
-		echo "Cannot enable WebUI (--web) and MUI."
-		exit 1
-	fi
 fi
 
 # Extract BASENAME from %FILENAME% for later use.
 BASENAME="${FILENAME/firmware-/}"
 
 if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
-	# Default littlefs* offset (--web).
+    # Default littlefs* offset.
-	OFFSET=0x300000
+    OFFSET=0x300000
 
-	# Default OTA Offset
+    # Default OTA Offset
-	OTA_OFFSET=0x260000
+    OTA_OFFSET=0x260000
 
-	# littlefs* offset for BigDB 8mb and OTA OFFSET.
+    # littlefs* offset for BigDB 8mb and OTA OFFSET.
-	for variant in "${BIGDB_8MB[@]}"; do
+    for variant in "${BIGDB_8MB[@]}"; do
-		if [ -n "${FILENAME##*"$variant"*}" ]; then
+        if [ -z "${FILENAME##*"$variant"*}" ]; then
-			OFFSET=0x670000
+            OFFSET=0x670000
-			OTA_OFFSET=0x340000
+            OTA_OFFSET=0x340000
-		fi
+        fi
-	done
+    done
 
-	# littlefs* offset for BigDB 16mb and OTA OFFSET.
+    # littlefs* offset for BigDB 16mb and OTA OFFSET.
-	for variant in "${BIGDB_16MB[@]}"; do
+    for variant in "${BIGDB_16MB[@]}"; do
-		if [ -n "${FILENAME##*"$variant"*}" ]; then
+        if [ -z "${FILENAME##*"$variant"*}" ]; then
-			OFFSET=0xc90000
+            OFFSET=0xc90000
-			OTA_OFFSET=0x650000
+            OTA_OFFSET=0x650000
-		fi
+        fi
-	done
+    done
 
-	# Account for S3 board's different OTA partition
+    # Account for S3 board's different OTA partition
-	# FIXME: Use PlatformIO info to determine MCU type, this is unmaintainable
+    # FIXME: Use PlatformIO info to determine MCU type, this is unmaintainable
-	for variant in "${S3_VARIANTS[@]}"; do
+    for variant in "${S3_VARIANTS[@]}"; do
-		if [ -n "${FILENAME##*"$variant"*}" ]; then
+        if [ -z "${FILENAME##*"$variant"*}" ]; then
-			MCU="esp32s3"
+            MCU="esp32s3"
-		fi
+        fi
-	done
+    done
 
-	if [ "$MCU" != "esp32s3" ]; then
+    if [ "$MCU" != "esp32s3" ]; then
-		if [ -n "${FILENAME##*"esp32c3"*}" ]; then
+        if [ -n "${FILENAME##*"esp32c3"*}" ]; then
-			OTAFILE=bleota.bin
+            OTAFILE=bleota.bin
-		else
+        else
-			OTAFILE=bleota-c3.bin
+            OTAFILE=bleota-c3.bin
-		fi
+        fi
-	else
+    else
-		OTAFILE=bleota-s3.bin
+        OTAFILE=bleota-s3.bin
-	fi
+    fi
 
-	# Check if WEB_APP (--web) is enabled and add "littlefswebui-" to BASENAME else "littlefs-".
+    # Set SPIFFS filename with "littlefs-" prefix.
-	if [ "$WEB_APP" = true ]; then
+    SPIFFSFILE=littlefs-${BASENAME}
-		SPIFFSFILE=littlefswebui-${BASENAME}
-	else
-		SPIFFSFILE=littlefs-${BASENAME}
-	fi
 
-	if [[ ! -f $FILENAME ]]; then
+    if [[ ! -f "$FILENAME" ]]; then
-		echo "Error: file ${FILENAME} wasn't found. Terminating."
+        echo "Error: file ${FILENAME} wasn't found. Terminating."
-		exit 1
+        exit 1
-	fi
+    fi
-	if [[ ! -f $OTAFILE ]]; then
+    if [[ ! -f "$OTAFILE" ]]; then
-		echo "Error: file ${OTAFILE} wasn't found. Terminating."
+        echo "Error: file ${OTAFILE} wasn't found. Terminating."
-		exit 1
+        exit 1
-	fi
+    fi
-	if [[ ! -f $SPIFFSFILE ]]; then
+    if [[ ! -f "$SPIFFSFILE" ]]; then
-		echo "Error: file ${SPIFFSFILE} wasn't found. Terminating."
+        echo "Error: file ${SPIFFSFILE} wasn't found. Terminating."
-		exit 1
+        exit 1
-	fi
+    fi
 
-	echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
+    echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
-	$ESPTOOL_CMD erase_flash
+    $ESPTOOL_CMD erase_flash
-	$ESPTOOL_CMD write_flash 0x00 "${FILENAME}"
+    $ESPTOOL_CMD write_flash 0x00 "${FILENAME}"
-	echo "Trying to flash ${OTAFILE} at offset ${OTA_OFFSET}"
+    echo "Trying to flash ${OTAFILE} at offset ${OTA_OFFSET}"
-	$ESPTOOL_CMD write_flash $OTA_OFFSET "${OTAFILE}"
+    $ESPTOOL_CMD write_flash $OTA_OFFSET "${OTAFILE}"
-	echo "Trying to flash ${SPIFFSFILE}, at offset ${OFFSET}"
+    echo "Trying to flash ${SPIFFSFILE}, at offset ${OFFSET}"
-	$ESPTOOL_CMD write_flash $OFFSET "${SPIFFSFILE}"
+    $ESPTOOL_CMD write_flash $OFFSET "${SPIFFSFILE}"
 
 else
-	show_help
+    show_help
-	echo "Invalid file: ${FILENAME}"
+    echo "Invalid file: ${FILENAME}"
 fi
 
 exit 0

bin/device-update.bat

@@ -8,12 +8,13 @@ SET "PYTHON="
 SET "ESPTOOL_BAUD=115200"
 SET "ESPTOOL_CMD="
 SET "LOGCOUNTER=0"
+SET "CHANGE_MODE=0"
 
 GOTO getopts
 :help
 ECHO Flash image file to device, but leave existing system intact.
 ECHO.
-ECHO Usage: %SCRIPT_NAME% -f filename [-p PORT] [-P python]
+ECHO Usage: %SCRIPT_NAME% -f filename [-p PORT] [-P python] [--change-mode]
 ECHO.
 ECHO Options:
 ECHO     -f filename      The update .bin file to flash.  Custom to your device type and region. (required)
@@ -23,12 +24,15 @@ ECHO                      If not set, ESPTOOL iterates all ports (Dangerous).
 ECHO     -P python        Specify alternate python interpreter to use to invoke esptool. (default: python)
 ECHO                      If supplied the script will use python.
 ECHO                      If not supplied the script will try to find esptool in Path.
+ECHO     --change-mode    Attempt to place the device in correct mode. (1200bps Reset)
+ECHO                      Some hardware requires this twice.
 ECHO.
+ECHO Example: %SCRIPT_NAME% -p COM17 --change-mode
 ECHO Example: %SCRIPT_NAME% -f firmware-t-deck-tft-2.6.0.0b106d4-update.bin -p COM11
 GOTO eof
 
 :version
-ECHO %SCRIPT_NAME% [Version 2.6.1]
+ECHO %SCRIPT_NAME% [Version 2.6.2]
 ECHO Meshtastic
 GOTO eof
 
@@ -44,10 +48,13 @@ IF /I "%~1"=="-f" SET "FILENAME=%~2" & SHIFT
 IF "%~1"=="-p" SET "ESPTOOL_PORT=%~2" & SHIFT
 IF /I "%~1"=="--port" SET "ESPTOOL_PORT=%~2" & SHIFT
 IF "%~1"=="-P" SET "PYTHON=%~2" & SHIFT
+IF /I "%~1"=="--change-mode" SET "CHANGE_MODE=1"
 SHIFT
 GOTO getopts
 :endopts
 
+IF %CHANGE_MODE% EQU 1 GOTO skip-filename
+
 CALL :LOG_MESSAGE DEBUG "Checking FILENAME parameter..."
 IF "__!FILENAME!__"=="____" (
     CALL :LOG_MESSAGE DEBUG "Missing -f filename input."
@@ -77,6 +84,9 @@ IF "!FILENAME:update=!"=="!FILENAME!" (
     CALL :LOG_MESSAGE DEBUG "We are working with a *update* file. !FILENAME!"
 )
 
+:skip-filename
+SET "ESPTOOL_BAUD=1200"
+
 CALL :LOG_MESSAGE DEBUG "Determine the correct esptool command to use..."
 IF NOT "__%PYTHON%__"=="____" (
     SET "ESPTOOL_CMD=!PYTHON! -m esptool"
@@ -115,6 +125,12 @@ IF "__!ESPTOOL_PORT!__" == "____" (
 )
 CALL :LOG_MESSAGE INFO "Using esptool baud: !ESPTOOL_BAUD!."
 
+IF %CHANGE_MODE% EQU 1 (
+    @REM Attempt to change mode via 1200bps Reset.
+    CALL :RUN_ESPTOOL !ESPTOOL_BAUD! --after no_reset read_flash_status
+    GOTO eof
+)
+
 @REM Flashing operations.
 CALL :LOG_MESSAGE INFO "Trying to flash update "!FILENAME!" at OFFSET 0x10000..."
 CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash 0x10000 "!FILENAME!" || GOTO eof
@@ -135,6 +151,7 @@ EXIT /B %ERRORLEVEL%
 IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
 CALL :RESET_ERROR
 !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4
+IF %CHANGE_MODE% EQU 1 GOTO :eof
 IF %ERRORLEVEL% NEQ 0 (
     CALL :LOG_MESSAGE ERROR "Error running command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
     EXIT /B %ERRORLEVEL%

bin/device-update.sh

@@ -1,6 +1,7 @@
 #!/bin/sh
 
 PYTHON=${PYTHON:-$(which python3 python|head -n 1)}
+CHANGE_MODE=false
 
 # Determine the correct esptool command to use
 if "$PYTHON" -m esptool version >/dev/null 2>&1; then
@@ -17,17 +18,29 @@ fi
 # Usage info
 show_help() {
 cat << EOF
-Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME]
+Usage: $(basename "$0") [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME] [--change-mode]
 Flash image file to device, leave existing system intact."
 
     -h               Display this help and exit
     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
     -f FILENAME      The *update.bin file to flash.  Custom to your device type.
-    
+    --change-mode    Attempt to place the device in correct mode. Some hardware requires this twice. (1200bps Reset)
+
 EOF
 }
 
+# Check for --change-mode and remove it from arguments
+NEW_ARGS=()
+for arg in "$@"; do
+    if [ "$arg" = "--change-mode" ]; then
+        CHANGE_MODE=true
+    else
+        NEW_ARGS+=("$arg")
+    fi
+done
+
+set -- "${NEW_ARGS[@]}"
 
 while getopts ":hp:P:f:" opt; do
     case "${opt}" in
@@ -36,13 +49,13 @@ while getopts ":hp:P:f:" opt; do
             exit 0
             ;;
         p)  ESPTOOL_CMD="$ESPTOOL_CMD --port ${OPTARG}"
-	        ;;
+            ;;
         P)  PYTHON=${OPTARG}
             ;;
         f)  FILENAME=${OPTARG}
             ;;
         *)
- 	        echo "Invalid flag."
+            echo "Invalid flag."
             show_help >&2
             exit 1
             ;;
@@ -50,17 +63,22 @@ while getopts ":hp:P:f:" opt; do
 done
 shift "$((OPTIND-1))"
 
-[ -z "$FILENAME" -a -n "$1" ] && {
+if [ "$CHANGE_MODE" = true ]; then
-    FILENAME=$1
+	$ESPTOOL_CMD --baud 1200 --after no_reset read_flash_status
+    exit 0
+fi
+
+[ -z "$FILENAME" ]  && [ -n "$1" ] && {
+    FILENAME="$1"
     shift
 }
 
 if [ -f "${FILENAME}" ] && [ -z "${FILENAME##*"update"*}" ]; then
-	printf "Trying to flash update ${FILENAME}"
+    echo "Trying to flash update ${FILENAME}"
-	$ESPTOOL_CMD --baud 115200 write_flash 0x10000 ${FILENAME}
+    $ESPTOOL_CMD --baud 115200 write_flash 0x10000 "${FILENAME}"
 else
-	show_help
+    show_help
-	echo "Invalid file: ${FILENAME}"
+    echo "Invalid file: ${FILENAME}"
 fi
 
 exit 0

bin/generate_ci_matrix.py

@@ -27,7 +27,7 @@ for subdir, dirs, files in os.walk(rootdir):
                 if c.startswith("env:"):
                     section = config[c].name[4:]
                     if "extends" in config[config[c].name]:
-                        if config[config[c].name]["extends"] == options[0] + "_base":
+                        if options[0] + "_base" in config[config[c].name]["extends"]:
                             if "board_level" in config[config[c].name]:
                                 if (
                                     config[config[c].name]["board_level"] == "extra"

bin/meshtasticd.service

@@ -5,10 +5,11 @@ StartLimitInterval=200
 StartLimitBurst=5
 
 [Service]
-User=root
+AmbientCapabilities=CAP_NET_BIND_SERVICE
-Group=root
+User=meshtasticd
+Group=meshtasticd
 Type=simple
-ExecStart=/usr/sbin/meshtasticd
+ExecStart=/usr/bin/meshtasticd
 Restart=always
 RestartSec=3
 

bin/native-install.sh

@@ -1,6 +1,6 @@
 #!/usr/bin/env bash
 
-cp "release/meshtasticd_linux_$(uname -m)" /usr/sbin/meshtasticd
+cp "release/meshtasticd_linux_$(uname -m)" /usr/bin/meshtasticd
 mkdir -p /etc/meshtasticd
 if [[ -f "/etc/meshtasticd/config.yaml" ]]; then
 	cp bin/config-dist.yaml /etc/meshtasticd/config-upgrade.yaml

bin/org.meshtastic.meshtasticd.desktop

@@ -0,0 +1,8 @@
+[Desktop Entry]
+Name=Meshtastic
+Comment=Meshtastic App
+Exec=meshtasticd
+Icon=org.meshtastic.meshtasticd
+Terminal=true
+Type=Application
+Categories=Network;Chat;HamRadio;

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -0,0 +1,133 @@
+<?xml version='1.0' encoding='UTF-8'?>
+<component type="desktop-application">
+  <id>org.meshtastic.meshtasticd</id>
+
+  <name>Meshtastic</name>
+  <summary>Decentralized mesh communication</summary>
+
+  <metadata_license>CC-BY-4.0</metadata_license>
+  <project_license>GPL-3.0-or-later</project_license>
+
+  <developer id="org.meshtastic">
+    <name>Meshtastic</name>
+  </developer>
+
+  <description>
+    <p>
+      Meshtastic is an open source project for creating off-grid, affordable, and resilient communication with LoRa mesh networks.
+    </p>
+  </description>
+
+  <launchable type="desktop-id">org.meshtastic.meshtasticd.desktop</launchable>
+
+  <categories>
+    <category>Network</category>
+    <category>Chat</category>
+    <category>HamRadio</category>
+  </categories>
+  <keywords>
+    <keyword>mesh</keyword>
+    <keyword>LoRa</keyword>
+  </keywords>
+
+  <recommends>
+    <control>keyboard</control>
+    <control>pointing</control>
+    <control>touch</control>
+  </recommends>
+  <requires>
+    <display_length compare="ge">360</display_length>
+  </requires>
+
+  <branding>
+    <color type="primary" scheme_preference="light">#97be89</color>
+    <color type="primary" scheme_preference="dark">#206538</color>
+  </branding>
+
+  <content_rating type="oars-1.1">
+    <content_attribute id="social-chat">intense</content_attribute>
+    <content_attribute id="social-location">intense</content_attribute>
+  </content_rating>
+
+  <url type="bugtracker">https://github.com/meshtastic/firmware/issues</url>
+  <url type="homepage">https://meshtastic.org/</url>
+  <url type="donation">https://opencollective.com/meshtastic</url>
+  <url type="faq">https://meshtastic.org/docs/software/linux/usage/</url>
+  <url type="vcs-browser">https://github.com/meshtastic/firmware/</url>
+
+  <screenshots>
+    <screenshot type="default">
+      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_home_dashboard_dark.webp</image>
+      <caption>Home Dashboard</caption>
+    </screenshot>
+    <screenshot>
+      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_initial_boot.webp</image>
+      <caption>Setup</caption>
+    </screenshot>
+    <screenshot>
+      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_node_list_dark.webp</image>
+      <caption>Nodes List</caption>
+    </screenshot>
+    <screenshot>
+      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_chat_list_dark.webp</image>
+      <caption>Chats List</caption>
+    </screenshot>
+    <screenshot>
+      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_chat_message_dark.webp</image>
+      <caption>Messages</caption>
+    </screenshot>
+    <screenshot>
+      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_map_dark.webp</image>
+      <caption>Map</caption>
+    </screenshot>
+    <screenshot>
+      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_settings_dark.webp</image>
+      <caption>Settings</caption>
+    </screenshot>
+  </screenshots>
+
+  <releases>
+    <release version="2.7.3" date="2025-07-10">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.3</url>
+    </release>
+    <release version="2.7.2" date="2025-07-04">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.2</url>
+    </release>
+    <release version="2.7.1" date="2025-06-27">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.1</url>
+    </release>
+    <release version="2.7.0" date="2025-06-20">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.0</url>
+    </release>
+    <release version="2.6.13" date="2025-06-16">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.13</url>
+    </release>
+    <release version="2.6.12" date="2025-06-15">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.12</url>
+    </release>
+    <release version="2.6.11" date="2025-06-02">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.11</url>
+    </release>
+    <release version="2.6.10" date="2025-05-25">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.10</url>
+    </release>
+    <release version="2.6.9" date="2025-05-15">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.9</url>
+    </release>
+    <release version="2.6.8" date="2025-05-05">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.8</url>
+    </release>
+    <release version="2.6.7" date="2025-04-28">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.7</url>
+    </release>
+    <release version="2.6.6" date="2025-04-15">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.6</url>
+    </release>
+    <release version="2.6.5" date="2025-03-30">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.5</url>
+    </release>
+    <release version="2.6.4" date="2025-03-28">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.4</url>
+    </release>
+  </releases>
+</component>

bin/org.meshtastic.meshtasticd.svg

@@ -0,0 +1,16 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN" "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
+<svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" version="1.1" width="512" height="512" viewBox="0 0 512 512" xml:space="preserve">
+<desc>Created with Fabric.js 4.6.0</desc>
+<defs>
+</defs>
+<g transform="matrix(1 0 0 1 256 256)" id="xYQ9Gk9Jwpgj_HMOXB3F_"  >
+<path style="stroke: rgb(213,130,139); stroke-width: 0; stroke-dasharray: none; stroke-linecap: butt; stroke-dashoffset: 0; stroke-linejoin: miter; stroke-miterlimit: 4; fill: rgb(103,234,148); fill-rule: nonzero; opacity: 1;" vector-effect="non-scaling-stroke"  transform=" translate(-256, -256)" d="M 0 0 L 512 0 L 512 512 L 0 512 z" stroke-linecap="round" />
+</g>
+<g transform="matrix(1.79 0 0 1.79 313.74 258.36)" id="1xBsk2n9FZp60Rz1O-ceJ"  >
+<path style="stroke: none; stroke-width: 1; stroke-dasharray: none; stroke-linecap: butt; stroke-dashoffset: 0; stroke-linejoin: round; stroke-miterlimit: 2; fill: rgb(44,45,60); fill-rule: evenodd; opacity: 1;" vector-effect="non-scaling-stroke"  transform=" translate(-250.97, -362.41)" d="M 250.908 330.267 L 193.126 415.005 L 180.938 406.694 L 244.802 313.037 C 246.174 311.024 248.453 309.819 250.889 309.816 C 253.326 309.814 255.606 311.015 256.982 313.026 L 320.994 406.536 L 308.821 414.869 L 250.908 330.267 Z" stroke-linecap="round" />
+</g>
+<g transform="matrix(1.81 0 0 1.81 145 256.15)" id="KxN7E9YpbyPgz0S4z4Cl6"  >
+<path style="stroke: none; stroke-width: 1; stroke-dasharray: none; stroke-linecap: butt; stroke-dashoffset: 0; stroke-linejoin: round; stroke-miterlimit: 2; fill: rgb(44,45,60); fill-rule: evenodd; opacity: 1;" vector-effect="non-scaling-stroke"  transform=" translate(-115.14, -528.06)" d="M 87.642 581.398 L 154.757 482.977 L 142.638 474.713 L 75.523 573.134 L 87.642 581.398 Z" stroke-linecap="round" />
+</g>
+</svg>

bin/platformio-custom.py

@@ -131,3 +131,33 @@ for lb in env.GetLibBuilders():
     if lb.name == "meshtastic-device-ui":
         lb.env.Append(CPPDEFINES=[("APP_VERSION", verObj["long"])])
         break
+
+# Get the display resolution from macros
+def get_display_resolution(build_flags):
+    # Check "DISPLAY_SIZE" to determine the screen resolution
+    for flag in build_flags:
+        if isinstance(flag, tuple) and flag[0] == "DISPLAY_SIZE":
+            screen_width, screen_height = map(int, flag[1].split("x"))
+            return screen_width, screen_height
+    print("No screen resolution defined in build_flags. Please define DISPLAY_SIZE.")
+    exit(1)
+
+def load_boot_logo(source, target, env):
+    build_flags = env.get("CPPDEFINES", [])
+    logo_w, logo_h = get_display_resolution(build_flags)
+    print(f"TFT build with {logo_w}x{logo_h} resolution detected")
+
+    # Load the boot logo from `branding/logo_<width>x<height>.png` if it exists
+    source_path = join(env["PROJECT_DIR"], "branding", f"logo_{logo_w}x{logo_h}.png")
+    dest_dir = join(env["PROJECT_DIR"], "data", "boot")
+    dest_path = join(dest_dir, "logo.png")
+    if env.File(source_path).exists():
+        print(f"Loading boot logo from {source_path}")
+        # Prepare the destination
+        env.Execute(f"mkdir -p {dest_dir} && rm -f {dest_path}")
+        # Copy the logo to the `data/boot` directory
+        env.Execute(f"cp {source_path} {dest_path}")
+
+# Load the boot logo on TFT builds
+if ("HAS_TFT", 1) in env.get("CPPDEFINES", []):
+    env.AddPreAction('$BUILD_DIR/littlefs.bin', load_boot_logo)

bin/rpkg.macros

@@ -2,6 +2,10 @@ function meshtastic_version {
     meshtastic_version=$(python3 bin/buildinfo.py short)
     echo -n "$meshtastic_version"
 }
+function web_version {
+    web_version=$(cat bin/web.version)
+    echo -n "$web_version"
+}
 function git_commits_num {
     total_commits=$(git rev-list --all --count)
     echo -n "$total_commits"

bin/web.version

@@ -0,0 +1 @@
+2.6.4

boards/ThinkNode-M1.json

@@ -48,6 +48,6 @@
     "require_upload_port": true,
     "wait_for_upload_port": true
   },
-  "url": "FIXME",
+  "url": "https://www.elecrow.com/thinknode-m1-meshtastic-lora-signal-transceiver-powered-by-nrf52840-with-154-screen-support-gps.html",
   "vendor": "ELECROW"
 }

boards/crowpanel.json

@@ -0,0 +1,43 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi",
+      "partitions": "default_16MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=0",
+      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=0"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "ESP32-S3-WROOM-1-N16R8"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "ESP32-S3-WROOM-1-N16R8 (16 MB Flash, 8 MB PSRAM)",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 524288,
+    "maximum_size": 16777216,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "monitor": {
+    "speed": 115200
+  },
+  "url": "https://www.espressif.com/sites/default/files/documentation/esp32-s3-wroom-1_wroom-1u_datasheet_en.pdf",
+  "vendor": "Espressif"
+}

boards/gat562_mesh_trial_tracker.json

@@ -0,0 +1,52 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "GAT562 Mesh Trial Tracker",
+    "mcu": "nrf52840",
+    "variant": "gat562_mesh_trial_tracker",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino", "freertos"],
+  "name": "GAT562 Mesh Trial Tracker",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "http://www.gat-iot.com/",
+  "vendor": "GAT-IOT"
+}

boards/heltec_mesh_node_t114.json

@@ -10,7 +10,8 @@
     "hwids": [
       ["0x239A", "0x4405"],
       ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"]
+      ["0x239A", "0x002A"],
+      ["0x2886", "0x1667"]
     ],
     "usb_product": "HT-n5262",
     "mcu": "nrf52840",
@@ -48,6 +49,6 @@
     "require_upload_port": true,
     "wait_for_upload_port": true
   },
-  "url": "FIXME",
+  "url": "https://heltec.org/project/mesh-node-t114/",
   "vendor": "Heltec"
 }

boards/heltec_mesh_pocket.json

@@ -0,0 +1,53 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x4405"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"]
+    ],
+    "usb_product": "HT-n5262",
+    "mcu": "nrf52840",
+    "variant": "heltec_mesh_pocket",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "Heltec nrf (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://heltec.org/project/meshpocket/",
+  "vendor": "Heltec"
+}

boards/heltec_vision_master_e213.json

@@ -2,7 +2,8 @@
   "build": {
     "arduino": {
       "ldscript": "esp32s3_out.ld",
-      "partitions": "default_8MB.csv"
+      "partitions": "default_8MB.csv",
+      "memory_type": "qio_opi"
     },
     "core": "esp32",
     "extra_flags": [
@@ -15,6 +16,7 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
+    "psram_type": "opi",
     "hwids": [
       ["0x303A", "0x1001"],
       ["0x303A", "0x0002"]

boards/heltec_vision_master_e290.json

@@ -2,7 +2,8 @@
   "build": {
     "arduino": {
       "ldscript": "esp32s3_out.ld",
-      "partitions": "default_8MB.csv"
+      "partitions": "default_8MB.csv",
+      "memory_type": "qio_opi"
     },
     "core": "esp32",
     "extra_flags": [
@@ -15,6 +16,7 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
+    "psram_type": "opi",
     "hwids": [
       ["0x303A", "0x1001"],
       ["0x303A", "0x0002"]

boards/heltec_vision_master_t190.json

@@ -2,7 +2,8 @@
   "build": {
     "arduino": {
       "ldscript": "esp32s3_out.ld",
-      "partitions": "default_8MB.csv"
+      "partitions": "default_8MB.csv",
+      "memory_type": "qio_opi"
     },
     "core": "esp32",
     "extra_flags": [
@@ -15,6 +16,7 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
+    "psram_type": "opi",
     "hwids": [
       ["0x303A", "0x1001"],
       ["0x303A", "0x0002"]

boards/seeed-sensecap-indicator.json

@@ -18,6 +18,7 @@
     "f_boot": "120000000L",
     "boot": "qio",
     "flash_mode": "qio",
+    "psram_type": "opi",
     "hwids": [["0x1A86", "0x7523"]],
     "mcu": "esp32s3",
     "variant": "esp32s3"

boards/seeed-xiao-s3.json

@@ -15,6 +15,7 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
+    "psram_type": "opi",
     "hwids": [["0x2886", "0x0059"]],
     "mcu": "esp32s3",
     "variant": "seeed-xiao-s3"

boards/seeed_solar_node.json

@@ -0,0 +1,54 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_MDBT50Q_RX -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x2886", "0x0059"]],
+    "usb_product": "XIAO-BOOT",
+    "mcu": "nrf52840",
+    "variant": "seeed_solar_node",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "7.3.0",
+      "sd_fwid": "0x0123"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "seeed_solar_node",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.seeedstudio.com/Seeed-XIAO-BLE-Sense-nRF52840-p-5253.html",
+  "vendor": "Seeed Studio"
+}

boards/seeed_wio_tracker_L1.json

@@ -0,0 +1,57 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_MDBT50Q_RX -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x2886", "0x1668"],
+      ["0x2886", "0x1667"]
+    ],
+    "usb_product": "TRACKER L1",
+    "mcu": "nrf52840",
+    "variant": "seeed_wio_tracker_L1",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "7.3.0",
+      "sd_fwid": "0x0123"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "seeed_wio_tracker_L1",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.seeedstudio.com/Wio-Tracker-L1-p-6477.html",
+  "vendor": "Seeed Studio"
+}

boards/seeed_xiao_nrf52840_kit.json

@@ -7,9 +7,7 @@
     "cpu": "cortex-m4",
     "extra_flags": "-DARDUINO_MDBT50Q_RX -DNRF52840_XXAA",
     "f_cpu": "64000000L",
-    "hwids": [
+    "hwids": [["0x2886", "0x0166"]],
-      ["0x2886", "0x0166"]
-    ],
     "usb_product": "XIAO-BOOT",
     "mcu": "nrf52840",
     "variant": "seeed_xiao_nrf52840_kit",

boards/t-watch-s3.json

@@ -16,6 +16,7 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
+    "psram_type": "opi",
     "hwids": [
       ["0x303A", "0x1001"],
       ["0x303A", "0x0002"]
@@ -23,16 +24,16 @@
     "mcu": "esp32s3",
     "variant": "t-watch-s3"
   },
-  "connectivity": ["wifi", "bluetooth"],
+  "connectivity": ["wifi", "bluetooth", "lora"],
   "debug": {
     "openocd_target": "esp32s3.cfg"
   },
   "frameworks": ["arduino"],
   "name": "LilyGo T-Watch 2020 V3",
   "upload": {
-    "flash_size": "8MB",
+    "flash_size": "16MB",
     "maximum_ram_size": 327680,
-    "maximum_size": 8388608,
+    "maximum_size": 16777216,
     "require_upload_port": true,
     "use_1200bps_touch": true,
     "wait_for_upload_port": true,

boards/tracker-t1000-e.json

@@ -11,7 +11,8 @@
       ["0x239A", "0x8029"],
       ["0x239A", "0x0029"],
       ["0x239A", "0x002A"],
-      ["0x239A", "0x802A"]
+      ["0x239A", "0x802A"],
+      ["0x2886", "0x0057"]
     ],
     "usb_product": "T1000-E-BOOT",
     "mcu": "nrf52840",

boards/wiscore_rak3312.json

@@ -0,0 +1,41 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi",
+      "partitions": "default_16MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DRAK3312",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1",
+      "-DBOARD_HAS_PSRAM"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "dio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "rak3312"
+  },
+  "connectivity": ["wifi", "bluetooth"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "WisCore RAK3312 Board",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.rakwireless.com/en-us",
+  "vendor": "rakwireless"
+}

branding/README.md

@@ -0,0 +1,17 @@
+# Meshtastic Branding / Whitelabeling
+
+This directory is consumed during the creation of **event** firmware.
+
+`bin/platformio-custom.py` determines the display resolution, and locates the corresponding `logo_<width>x<height>.png`.
+
+Ex:
+
+- `logo_800x480.png`
+- `logo_480x480.png`
+- `logo_480x320.png`
+- `logo_320x480.png`
+- `logo_320x240.png`
+
+This file is copied to `data/boot/logo.png` before filesytem image compilation.
+
+For additional examples see the [`event/defcon33` branch](https://github.com/meshtastic/firmware/tree/event/defcon33).

debian/changelog

@@ -1,9 +1,34 @@
-meshtasticd (2.5.22.0) UNRELEASED; urgency=medium
+meshtasticd (2.7.3.0) UNRELEASED; urgency=medium
 
+  [ Austin Lane ]
   * Initial packaging
   * GitHub Actions Automatic version bump
   * GitHub Actions Automatic version bump
   * GitHub Actions Automatic version bump
   * GitHub Actions Automatic version bump
 
- -- Austin Lane <github-actions[bot]@users.noreply.github.com>  Wed, 05 Feb 2025 01:10:33 +0000
+  [  ]
+  * GitHub Actions Automatic version bump
+
+  [  ]
+  * GitHub Actions Automatic version bump
+
+  [  ]
+  * GitHub Actions Automatic version bump
+
+  [  ]
+  * GitHub Actions Automatic version bump
+
+  [  ]
+  * GitHub Actions Automatic version bump
+
+  [  ]
+  * GitHub Actions Automatic version bump
+
+  [  ]
+  * GitHub Actions Automatic version bump
+
+  [ Ubuntu ]
+  * GitHub Actions Automatic version bump
+
+ -- Ubuntu <github-actions[bot]@users.noreply.github.com>  Thu, 10 Jul 2025 16:29:27 +0000

debian/ci_pack_sdeb.sh

@@ -5,13 +5,14 @@ export PLATFORMIO_PACKAGES_DIR=pio/packages
 export PLATFORMIO_CORE_DIR=pio/core
 
 # Download libraries to `pio`
-platformio pkg install -e native
+platformio pkg install -e native-tft
-platformio pkg install -e native -t platformio/tool-scons@4.40502.0
+platformio pkg install -e native-tft -t platformio/tool-scons@4.40502.0
 # Compress `pio` directory to prevent dh_clean from sanitizing it
 tar -cf pio.tar pio/
 rm -rf pio
-# Download the latest meshtastic/web release build.tar to `web.tar`
+# Download the meshtastic/web release build.tar to `web.tar`
-curl -L https://github.com/meshtastic/web/releases/latest/download/build.tar -o web.tar
+web_ver=$(cat bin/web.version)
+curl -L "https://github.com/meshtastic/web/releases/download/v$web_ver/build.tar" -o web.tar
 
 package=$(dpkg-parsechangelog --show-field Source)
 

debian/control

@@ -21,14 +21,19 @@ Build-Depends: debhelper-compat (= 13),
                openssl,
                libssl-dev,
                libulfius-dev,
-               liborcania-dev
+               liborcania-dev,
+               libx11-dev,
+               libinput-dev,
+               libxkbcommon-x11-dev
 Standards-Version: 4.6.2
 Homepage: https://github.com/meshtastic/firmware
 Rules-Requires-Root: no
 
 Package: meshtasticd
 Architecture: any
-Depends: ${misc:Depends}, ${shlibs:Depends}
+Depends: adduser,
+         ${misc:Depends},
+         ${shlibs:Depends}
 Description: Meshtastic daemon for communicating with Meshtastic devices
  Meshtastic is an off-grid text communication platform that uses inexpensive 
- LoRa radios.
+ LoRa radios.

debian/meshtasticd.dirs

@@ -1,5 +1,6 @@
+var/lib/meshtasticd
 etc/meshtasticd
 etc/meshtasticd/config.d
 etc/meshtasticd/available.d
 usr/share/meshtasticd/web
-etc/meshtasticd/ssl
+etc/meshtasticd/ssl

debian/meshtasticd.install

@@ -1,8 +1,8 @@
-.pio/build/native/meshtasticd  usr/sbin
+.pio/build/native-tft/meshtasticd  usr/bin
 
-bin/config.yaml                etc/meshtasticd
+bin/config.yaml                    etc/meshtasticd
-bin/config.d/*                 etc/meshtasticd/available.d
+bin/config.d/*                     etc/meshtasticd/available.d
 
-bin/meshtasticd.service        lib/systemd/system
+bin/meshtasticd.service            lib/systemd/system
 
-web/*                          usr/share/meshtasticd/web
+web/*                              usr/share/meshtasticd/web

debian/meshtasticd.postinst

@@ -0,0 +1,80 @@
+#!/bin/sh
+# postinst script for meshtasticd
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <postinst> `configure' <most-recently-configured-version>
+#        * <old-postinst> `abort-upgrade' <new version>
+#        * <conflictor's-postinst> `abort-remove' `in-favour' <package>
+#          <new-version>
+#        * <postinst> `abort-remove'
+#        * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
+#          <failed-install-package> <version> `removing'
+#          <conflicting-package> <version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+case "$1" in
+    configure|reconfigure)
+    # create spi, gpio groups (for udev rules)
+    # these groups already exist on Raspberry Pi OS
+        getent group spi >/dev/null 2>/dev/null || addgroup --system spi
+        getent group gpio >/dev/null 2>/dev/null || addgroup --system gpio
+    # create a meshtasticd group and user
+        getent passwd meshtasticd >/dev/null 2>/dev/null || adduser --system --home /var/lib/meshtasticd --no-create-home meshtasticd
+        getent group meshtasticd >/dev/null 2>/dev/null || addgroup --system meshtasticd
+        adduser meshtasticd meshtasticd >/dev/null 2>/dev/null
+        adduser meshtasticd spi >/dev/null 2>/dev/null
+        adduser meshtasticd gpio >/dev/null 2>/dev/null
+    # add meshtasticd user to appropriate groups (if they exist)
+        getent group plugdev >/dev/null 2>/dev/null && adduser meshtasticd plugdev >/dev/null 2>/dev/null
+        getent group dialout >/dev/null 2>/dev/null && adduser meshtasticd dialout >/dev/null 2>/dev/null
+        getent group i2c >/dev/null 2>/dev/null && adduser meshtasticd i2c >/dev/null 2>/dev/null
+        getent group video >/dev/null 2>/dev/null && adduser meshtasticd video >/dev/null 2>/dev/null
+        getent group audio >/dev/null 2>/dev/null && adduser meshtasticd audio >/dev/null 2>/dev/null
+        getent group input >/dev/null 2>/dev/null && adduser meshtasticd input >/dev/null 2>/dev/null
+
+
+    # migrate /root/.portduino to /var/lib/meshtasticd/.portduino
+    # should only run once, upon upgrade from < 2.6.9
+    if [ -n "$2" ] && dpkg --compare-versions "$2" lt 2.6.9; then
+        if [ -d /root/.portduino ] && [ ! -e /var/lib/meshtasticd/.portduino ]; then
+            cp -r /root/.portduino /var/lib/meshtasticd/.portduino
+            echo "Migrated meshtasticd VFS from /root/.portduino to /var/lib/meshtasticd/.portduino"
+            echo "meshtasticd now runs as the 'meshtasticd' user, not 'root'."
+            echo "See https://github.com/meshtastic/firmware/pull/6718 for details"
+        fi
+    fi
+
+    if [ -d /var/lib/meshtasticd ]; then
+        chown -R meshtasticd:meshtasticd /var/lib/meshtasticd
+    fi
+
+    if [ -d /etc/meshtasticd ]; then
+        chown -R meshtasticd:meshtasticd /etc/meshtasticd
+    fi
+
+    if [ -d /usr/share/meshtasticd ]; then
+        chown -R meshtasticd:meshtasticd /usr/share/meshtasticd
+    fi
+    ;;
+
+    abort-upgrade|abort-remove|abort-deconfigure)
+    ;;
+
+    *)
+        echo "postinst called with unknown argument \`$1'" >&2
+        exit 1
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0

debian/meshtasticd.postrm

@@ -0,0 +1,41 @@
+#!/bin/sh
+# postrm script for meshtasticd
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <postrm> `remove'
+#        * <postrm> `purge'
+#        * <old-postrm> `upgrade' <new-version>
+#        * <new-postrm> `failed-upgrade' <old-version>
+#        * <new-postrm> `abort-install'
+#        * <new-postrm> `abort-install' <old-version>
+#        * <new-postrm> `abort-upgrade' <old-version>
+#        * <disappearer's-postrm> `disappear' <overwriter>
+#          <overwriter-version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+case "$1" in
+    purge|remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
+      # Only remove /var/lib/meshtasticd on purge
+      if [ "${1}" = "purge" ] ; then
+          rm -rf /var/lib/meshtasticd
+      fi
+    ;;
+
+    *)
+        echo "postrm called with unknown argument \`$1'" >&2
+        exit 1
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0

debian/meshtasticd.udev

@@ -0,0 +1,7 @@
+# Set spidev ownership to 'spi' group
+SUBSYSTEM=="spidev", KERNEL=="spidev*", GROUP="spi", MODE="0660"
+# Allow access to USB CH341 devices
+SUBSYSTEM=="usb", ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="5512", MODE="0666"
+# Set gpio ownership to 'gpio' group
+SUBSYSTEM=="*gpiomem*", GROUP="gpio", MODE="0660"
+SUBSYSTEM=="gpio", GROUP="gpio", MODE="0660"

debian/rules

@@ -26,7 +26,7 @@ override_dh_auto_build:
 	mkdir -p web && tar -xf web.tar -C web
 	gunzip web/ -r
 	# Build with platformio
-	$(PIO_ENV) platformio run -e native
+	$(PIO_ENV) platformio run -e native-tft
 	# Move the binary and default config to the correct name
-	mv .pio/build/native/program .pio/build/native/meshtasticd
+	mv .pio/build/native-tft/program .pio/build/native-tft/meshtasticd
 	cp bin/config-dist.yaml bin/config.yaml

meshtasticd.spec.rpkg

@@ -10,6 +10,8 @@
 # - https://docs.pagure.org/rpkg-util/v3/index.html
 # - https://docs.fedoraproject.org/en-US/packaging-guidelines/Versioning/
 
+%global  meshtasticd_user          meshtasticd   
+
 Name:           meshtasticd
 # Version Ex:   2.5.19
 Version:        {{{ meshtastic_version }}}
@@ -21,7 +23,7 @@ Summary:        Meshtastic daemon for communicating with Meshtastic devices
 License:        GPL-3.0
 URL:            https://github.com/meshtastic/firmware
 Source0:        {{{ git_dir_pack }}}
-Source1:        https://github.com/meshtastic/web/releases/latest/download/build.tar
+Source1:        https://github.com/meshtastic/web/releases/download/v{{{ web_version }}}/build.tar
 
 BuildRequires: systemd-rpm-macros
 BuildRequires: python3-devel
@@ -42,6 +44,12 @@ BuildRequires: pkgconfig(openssl)
 BuildRequires: pkgconfig(liborcania)
 BuildRequires: pkgconfig(libyder)
 BuildRequires: pkgconfig(libulfius)
+# TFT components:
+BuildRequires: pkgconfig(x11)
+BuildRequires: pkgconfig(libinput)
+BuildRequires: pkgconfig(xkbcommon-x11)
+
+Requires:      systemd-udev
 
 %description
 Meshtastic daemon for controlling Meshtastic devices. Meshtastic is an off-grid
@@ -55,19 +63,29 @@ tar -xf %{SOURCE1} -C web
 gzip -dr web
 
 %build
-# Use the “native” environment from platformio to build a Linux binary
+# Use the “native-tft” environment from platformio to build a Linux binary
-platformio run -e native
+platformio run -e native-tft
 
 %install
-mkdir -p %{buildroot}%{_sbindir}
+# Install meshtasticd binary
-install -m 0755 .pio/build/native/program %{buildroot}%{_sbindir}/meshtasticd
+mkdir -p %{buildroot}%{_bindir}
+install -m 0755 .pio/build/native-tft/program %{buildroot}%{_bindir}/meshtasticd
 
+# Install portduino VFS dir
+install -p -d -m 0770 %{buildroot}%{_localstatedir}/lib/meshtasticd
+
+# Install udev rules
+mkdir -p %{buildroot}%{_udevrulesdir}
+install -m 0644 bin/99-meshtasticd-udev.rules %{buildroot}%{_udevrulesdir}/99-meshtasticd-udev.rules
+
+# Install config dirs
 mkdir -p %{buildroot}%{_sysconfdir}/meshtasticd
 install -m 0644 bin/config-dist.yaml %{buildroot}%{_sysconfdir}/meshtasticd/config.yaml
 mkdir -p %{buildroot}%{_sysconfdir}/meshtasticd/config.d
 mkdir -p %{buildroot}%{_sysconfdir}/meshtasticd/available.d
 cp -r bin/config.d/* %{buildroot}%{_sysconfdir}/meshtasticd/available.d
 
+# Install systemd service
 install -D -m 0644 bin/meshtasticd.service %{buildroot}%{_unitdir}/meshtasticd.service
 
 # Install the web files under /usr/share/meshtasticd/web
@@ -76,10 +94,54 @@ cp -r web/* %{buildroot}%{_datadir}/meshtasticd/web
 # Install default SSL storage directory (for web)
 mkdir -p %{buildroot}%{_sysconfdir}/meshtasticd/ssl
 
+%pre
+# create spi group (for udev rules)
+getent group spi > /dev/null || groupadd -r spi
+# create a meshtasticd group and user
+getent group %{meshtasticd_user} > /dev/null || groupadd -r %{meshtasticd_user}
+getent passwd %{meshtasticd_user} > /dev/null || \
+    useradd -r -d %{_localstatedir}/lib/meshtasticd -g %{meshtasticd_user} -G spi \
+    -s /sbin/nologin -c "Meshtastic Daemon" %{meshtasticd_user}
+# add meshtasticd user to appropriate groups (if they exist)
+getent group gpio > /dev/null && usermod -a -G gpio %{meshtasticd_user} > /dev/null
+getent group plugdev > /dev/null && usermod -a -G plugdev %{meshtasticd_user} > /dev/null
+getent group dialout > /dev/null && usermod -a -G dialout %{meshtasticd_user} > /dev/null
+getent group i2c > /dev/null && usermod -a -G i2c %{meshtasticd_user} > /dev/null
+getent group video > /dev/null && usermod -a -G video %{meshtasticd_user} > /dev/null
+getent group audio > /dev/null && usermod -a -G audio %{meshtasticd_user} > /dev/null
+getent group input > /dev/null && usermod -a -G input %{meshtasticd_user} > /dev/null
+exit 0
+
+%triggerin -- meshtasticd < 2.6.9
+# migrate .portduino (if it exists and hasn’t already been copied)
+if [ -d /root/.portduino ] && [ ! -e /var/lib/meshtasticd/.portduino ]; then
+    mkdir -p /var/lib/meshtasticd
+    cp -r /root/.portduino /var/lib/meshtasticd/.portduino
+    chown -R %{meshtasticd_user}:%{meshtasticd_user} \
+        %{_localstatedir}/lib/meshtasticd || :
+    # Fix SELinux labels if present (no-op on non-SELinux systems)
+    restorecon -R /var/lib/meshtasticd/.portduino 2>/dev/null || :
+    echo "Migrated meshtasticd VFS from /root/.portduino to /var/lib/meshtasticd/.portduino"
+    echo "meshtasticd now runs as the 'meshtasticd' user, not 'root'."
+    echo "See https://github.com/meshtastic/firmware/pull/6718 for details"
+fi
+
+%post
+%systemd_post meshtasticd.service
+
+%preun
+%systemd_preun meshtasticd.service
+
+%postun
+%systemd_postun_with_restart meshtasticd.service
+
 %files
+%defattr(-,%{meshtasticd_user},%{meshtasticd_user})
 %license LICENSE
 %doc README.md
-%{_sbindir}/meshtasticd
+%{_bindir}/meshtasticd
+%dir %{_localstatedir}/lib/meshtasticd
+%{_udevrulesdir}/99-meshtasticd-udev.rules
 %dir %{_sysconfdir}/meshtasticd
 %dir %{_sysconfdir}/meshtasticd/config.d
 %dir %{_sysconfdir}/meshtasticd/available.d
@@ -92,4 +154,4 @@ mkdir -p %{buildroot}%{_sysconfdir}/meshtasticd/ssl
 %dir %{_sysconfdir}/meshtasticd/ssl
 
 %changelog
-%autochangelog
+%autochangelog

platformio.ini

@@ -49,19 +49,28 @@ build_flags = -Wno-missing-field-initializers
 	-DMESHTASTIC_EXCLUDE_DROPZONE=1
 	-DMESHTASTIC_EXCLUDE_REMOTEHARDWARE=1
 	-DMESHTASTIC_EXCLUDE_HEALTH_TELEMETRY=1
-  	-DMESHTASTIC_EXCLUDE_POWERSTRESS=1 ; exclude power stress test module from main firmware
+	-DMESHTASTIC_EXCLUDE_POWERSTRESS=1 ; exclude power stress test module from main firmware
-        #-DBUILD_EPOCH=$UNIX_TIME
+	-DMESHTASTIC_EXCLUDE_GENERIC_THREAD_MODULE=1
-        #-D OLED_PL=1
+	-D MAX_THREADS=40 ; As we've split modules, we have more threads to manage
+	#-DBUILD_EPOCH=$UNIX_TIME
+	#-D OLED_PL=1
 
 monitor_speed = 115200
 monitor_filters = direct
 lib_deps =
-	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/e16cee124fe26490cb14880c679321ad8ac89c95.zip
+	# renovate: datasource=git-refs depName=meshtastic-esp8266-oled-ssd1306 packageName=https://github.com/meshtastic/esp8266-oled-ssd1306 gitBranch=master
+	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/0119501e9983bd894830b02f545c377ee08d66fe.zip
+	# renovate: datasource=custom.pio depName=OneButton packageName=mathertel/library/OneButton
 	mathertel/OneButton@2.6.1
+	# renovate: datasource=git-refs depName=meshtastic-arduino-fsm packageName=https://github.com/meshtastic/arduino-fsm gitBranch=master
 	https://github.com/meshtastic/arduino-fsm/archive/7db3702bf0cfe97b783d6c72595e3f38e0b19159.zip
+	# renovate: datasource=git-refs depName=meshtastic-TinyGPSPlus packageName=https://github.com/meshtastic/TinyGPSPlus gitBranch=master
 	https://github.com/meshtastic/TinyGPSPlus/archive/71a82db35f3b973440044c476d4bcdc673b104f4.zip
+	# renovate: datasource=git-refs depName=meshtastic-ArduinoThread packageName=https://github.com/meshtastic/ArduinoThread gitBranch=master
 	https://github.com/meshtastic/ArduinoThread/archive/7c3ee9e1951551b949763b1f5280f8db1fa4068d.zip
+	# renovate: datasource=custom.pio depName=Nanopb packageName=nanopb/library/Nanopb
 	nanopb/Nanopb@0.4.91
+	# renovate: datasource=custom.pio depName=ErriezCRC32 packageName=erriez/library/ErriezCRC32
 	erriez/ErriezCRC32@1.0.1
 	https://github.com/meshtastic/SE05X#031f8feccae62689ebbd06914b44bd88547535af
 
@@ -79,6 +88,7 @@ check_flags =
 framework = arduino
 lib_deps =
 	${env.lib_deps}
+	# renovate: datasource=custom.pio depName=NonBlockingRTTTL packageName=end2endzone/library/NonBlockingRTTTL
 	end2endzone/NonBlockingRTTTL@1.3.0
 build_flags = ${env.build_flags} -Os
 build_src_filter = ${env.build_src_filter} -<platform/portduino/> -<graphics/niche/>
@@ -86,57 +96,109 @@ build_src_filter = ${env.build_src_filter} -<platform/portduino/> -<graphics/nic
 ; Common libs for communicating over TCP/IP networks such as MQTT
 [networking_base]
 lib_deps =
-	knolleary/PubSubClient@2.8
+	# renovate: datasource=custom.pio depName=TBPubSubClient packageName=thingsboard/library/TBPubSubClient
-	arduino-libraries/NTPClient@3.1.0
+	thingsboard/TBPubSubClient@2.12.1
+	# renovate: datasource=custom.pio depName=NTPClient packageName=arduino-libraries/library/NTPClient
+	arduino-libraries/NTPClient@3.2.1
+	# renovate: datasource=custom.pio depName=Syslog packageName=arcao/library/Syslog
 	arcao/Syslog@2.0.0
 
 [radiolib_base]
 lib_deps =
-	jgromes/RadioLib@7.1.2
+	# renovate: datasource=custom.pio depName=RadioLib packageName=jgromes/library/RadioLib
+	jgromes/RadioLib@7.2.1
 
 [device-ui_base]
 lib_deps =
-	https://github.com/meshtastic/device-ui/archive/99171e87a70452395b56cce713a951c1c2964370.zip
+	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
+	https://github.com/meshtastic/device-ui/archive/86a09a7360f92d10053fbbf8d74f67f85b0ceb09.zip
 
 ; Common libs for environmental measurements in telemetry module
-; (not included in native / portduino)
 [environmental_base]
 lib_deps =
-	adafruit/Adafruit BusIO@1.17.0
+	# renovate: datasource=custom.pio depName=Adafruit BusIO packageName=adafruit/library/Adafruit BusIO
+	adafruit/Adafruit BusIO@1.17.2
+	# renovate: datasource=custom.pio depName=Adafruit Unified Sensor packageName=adafruit/library/Adafruit Unified Sensor
 	adafruit/Adafruit Unified Sensor@1.1.15
+	# renovate: datasource=custom.pio depName=Adafruit BMP280 packageName=adafruit/library/Adafruit BMP280 Library
 	adafruit/Adafruit BMP280 Library@2.6.8
+	# renovate: datasource=custom.pio depName=Adafruit BMP085 packageName=adafruit/library/Adafruit BMP085 Library
 	adafruit/Adafruit BMP085 Library@1.2.4
-	adafruit/Adafruit BME280 Library@2.2.4
+	# renovate: datasource=custom.pio depName=Adafruit BME280 packageName=adafruit/library/Adafruit BME280 Library
-	adafruit/Adafruit BMP3XX Library@2.1.6
+	adafruit/Adafruit BME280 Library@2.3.0
+	# renovate: datasource=custom.pio depName=Adafruit DPS310 packageName=adafruit/library/Adafruit DPS310
 	adafruit/Adafruit DPS310@1.1.5
+	# renovate: datasource=custom.pio depName=Adafruit MCP9808 packageName=adafruit/library/Adafruit MCP9808 Library
 	adafruit/Adafruit MCP9808 Library@2.0.2
-	adafruit/Adafruit INA260 Library@1.5.2
+	# renovate: datasource=custom.pio depName=Adafruit INA260 packageName=adafruit/library/Adafruit INA260 Library
+	adafruit/Adafruit INA260 Library@1.5.3
+	# renovate: datasource=custom.pio depName=Adafruit INA219 packageName=adafruit/library/Adafruit INA219
 	adafruit/Adafruit INA219@1.2.3
-	adafruit/Adafruit MAX1704X@1.0.3
+	# renovate: datasource=custom.pio depName=Adafruit PM25 AQI Sensor packageName=adafruit/library/Adafruit PM25 AQI Sensor
-	adafruit/Adafruit SHTC3 Library@1.0.1
+	adafruit/Adafruit PM25 AQI Sensor@2.0.0
-	adafruit/Adafruit LPS2X@2.0.6
+	# renovate: datasource=custom.pio depName=Adafruit MPU6050 packageName=adafruit/library/Adafruit MPU6050
-	adafruit/Adafruit SHT31 Library@2.2.2
-	adafruit/Adafruit PM25 AQI Sensor@1.2.0
 	adafruit/Adafruit MPU6050@2.2.6
+	# renovate: datasource=custom.pio depName=Adafruit LIS3DH packageName=adafruit/library/Adafruit LIS3DH
 	adafruit/Adafruit LIS3DH@1.3.0
+	# renovate: datasource=custom.pio depName=Adafruit AHTX0 packageName=adafruit/library/Adafruit AHTX0
 	adafruit/Adafruit AHTX0@2.0.5
+	# renovate: datasource=custom.pio depName=Adafruit LSM6DS packageName=adafruit/library/Adafruit LSM6DS
 	adafruit/Adafruit LSM6DS@4.7.4
-	adafruit/Adafruit VEML7700 Library@2.1.6
+	# renovate: datasource=custom.pio depName=Adafruit TSL2591 packageName=adafruit/library/Adafruit TSL2591 Library
-	adafruit/Adafruit SHT4x Library@1.0.5
 	adafruit/Adafruit TSL2591 Library@1.4.5
-	sparkfun/SparkFun Qwiic Scale NAU7802 Arduino Library@1.0.6
+	# renovate: datasource=custom.pio depName=EmotiBit MLX90632 packageName=emotibit/library/EmotiBit MLX90632
-	sparkfun/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library@1.3.0
-	ClosedCube OPT3001@1.1.2
 	emotibit/EmotiBit MLX90632@1.0.8
+	# renovate: datasource=custom.pio depName=Adafruit MLX90614 packageName=adafruit/library/Adafruit MLX90614 Library
 	adafruit/Adafruit MLX90614 Library@2.1.5
-	https://github.com/boschsensortec/Bosch-BSEC2-Library/archive/v1.7.2502.zip
+	# renovate: datasource=github-tags depName=INA3221 packageName=KodinLanewave/INA3221
-	boschsensortec/BME68x Sensor Library@1.1.40407
 	https://github.com/KodinLanewave/INA3221/archive/1.0.1.zip
+	# renovate: datasource=custom.pio depName=QMC5883L Compass packageName=mprograms/library/QMC5883LCompass
 	mprograms/QMC5883LCompass@1.2.3
+	# renovate: datasource=custom.pio depName=DFRobot_RTU packageName=dfrobot/library/DFRobot_RTU
 	dfrobot/DFRobot_RTU@1.0.3
-	https://github.com/meshtastic/DFRobot_LarkWeatherStation/archive/4de3a9cadef0f6a5220a8a906cf9775b02b0040d.zip
+	# renovate: datasource=git-refs depName=DFRobot_RainfallSensor packageName=https://github.com/DFRobot/DFRobot_RainfallSensor gitBranch=master
 	https://github.com/DFRobot/DFRobot_RainfallSensor/archive/38fea5e02b40a5430be6dab39a99a6f6347d667e.zip
+	# renovate: datasource=custom.pio depName=INA226 packageName=robtillaart/library/INA226
 	robtillaart/INA226@0.6.4
-
+	# renovate: datasource=custom.pio depName=SparkFun MAX3010x packageName=sparkfun/library/SparkFun MAX3010x Pulse and Proximity Sensor Library
-	; Health Sensor Libraries
 	sparkfun/SparkFun MAX3010x Pulse and Proximity Sensor Library@1.1.2
+	# renovate: datasource=custom.pio depName=SparkFun 9DoF IMU Breakout ICM 20948 packageName=sparkfun/library/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library
+	sparkfun/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library@1.3.2
+	# renovate: datasource=custom.pio depName=Adafruit LTR390 Library packageName=adafruit/library/Adafruit LTR390 Library
+	adafruit/Adafruit LTR390 Library@1.1.2
+	# renovate: datasource=custom.pio depName=Adafruit PCT2075 packageName=adafruit/library/Adafruit PCT2075
+	adafruit/Adafruit PCT2075@1.0.5
+	# renovate: datasource=custom.pio depName=DFRobot_BMM150 packageName=dfrobot/library/DFRobot_BMM150
+	dfrobot/DFRobot_BMM150@1.0.0
+
+; (not included in native / portduino)
+[environmental_extra]
+lib_deps =
+	# renovate: datasource=custom.pio depName=Adafruit BMP3XX packageName=adafruit/library/Adafruit BMP3XX Library
+	adafruit/Adafruit BMP3XX Library@2.1.6
+	# renovate: datasource=custom.pio depName=Adafruit MAX1704X packageName=adafruit/library/Adafruit MAX1704X
+	adafruit/Adafruit MAX1704X@1.0.3
+	# renovate: datasource=custom.pio depName=Adafruit SHTC3 packageName=adafruit/library/Adafruit SHTC3 Library
+	adafruit/Adafruit SHTC3 Library@1.0.1
+	# renovate: datasource=custom.pio depName=Adafruit LPS2X packageName=adafruit/library/Adafruit LPS2X
+	adafruit/Adafruit LPS2X@2.0.6
+	# renovate: datasource=custom.pio depName=Adafruit SHT31 packageName=adafruit/library/Adafruit SHT31 Library
+	adafruit/Adafruit SHT31 Library@2.2.2
+	# renovate: datasource=custom.pio depName=Adafruit VEML7700 packageName=adafruit/library/Adafruit VEML7700 Library
+	adafruit/Adafruit VEML7700 Library@2.1.6
+	# renovate: datasource=custom.pio depName=Adafruit SHT4x packageName=adafruit/library/Adafruit SHT4x Library
+	adafruit/Adafruit SHT4x Library@1.0.5
+	# renovate: datasource=custom.pio depName=SparkFun Qwiic Scale NAU7802 packageName=sparkfun/library/SparkFun Qwiic Scale NAU7802 Arduino Library
+	sparkfun/SparkFun Qwiic Scale NAU7802 Arduino Library@1.0.6
+	# renovate: datasource=custom.pio depName=ClosedCube OPT3001 packageName=closedcube/library/ClosedCube OPT3001
+	ClosedCube OPT3001@1.1.2
+	# renovate: datasource=custom.pio depName=Bosch BSEC2 packageName=boschsensortec/library/bsec2
+	boschsensortec/bsec2@1.10.2610
+	# renovate: datasource=custom.pio depName=Bosch BME68x packageName=boschsensortec/library/BME68x Sensor Library
+	boschsensortec/BME68x Sensor Library@1.3.40408
+	# renovate: datasource=git-refs depName=meshtastic-DFRobot_LarkWeatherStation packageName=https://github.com/meshtastic/DFRobot_LarkWeatherStation gitBranch=master
+	https://github.com/meshtastic/DFRobot_LarkWeatherStation/archive/4de3a9cadef0f6a5220a8a906cf9775b02b0040d.zip
+	# renovate: datasource=custom.pio depName=Sensirion Core packageName=sensirion/library/Sensirion Core
+	sensirion/Sensirion Core@0.7.1
+	# renovate: datasource=custom.pio depName=Sensirion I2C SCD4x packageName=sensirion/library/Sensirion I2C SCD4x
+	sensirion/Sensirion I2C SCD4x@1.1.0

renovate.json

@@ -0,0 +1,99 @@
+{
+  "$schema": "https://docs.renovatebot.com/renovate-schema.json",
+  "extends": [
+    ":dependencyDashboard",
+    ":semanticCommitTypeAll(chore)",
+    ":ignoreModulesAndTests",
+    "group:recommended",
+    "replacements:all",
+    "workarounds:all"
+  ],
+  "forkProcessing": "enabled",
+  "ignoreDeps": [
+    "protobufs"
+  ],
+  "git-submodules": {
+    "enabled": true
+  },
+  "pip_requirements": {
+    "managerFilePatterns": [
+      "/bin/bump_metainfo/requirements.txt/"
+    ]
+  },
+  "commitMessageTopic": "{{depName}}",
+  "labels": [
+    "dependencies"
+  ],
+  "customDatasources": {
+    "pio": {
+      "description": "PlatformIO Registry",
+      "defaultRegistryUrlTemplate": "https://api.registry.platformio.org/v3/packages/{{packageName}}",
+      "format": "json",
+      "transformTemplates": [
+        "{\"releases\": [$map($.versions, function($v) { { \"version\": $v.name, \"releaseTimestamp\": $v.released_at } })], \"homepage\": $encodeUrl($join([\"https://registry.platformio.org/\",$.type,\"/\",$.owner.username,\"/\",$.name])) }"
+      ]
+    }
+  },
+  "customManagers": [
+    {
+      "customType": "regex",
+      "description": "Match meshtastic/web version",
+      "managerFilePatterns": [
+        "/bin/web.version/"
+      ],
+      "matchStrings": [
+        "(?<currentValue>.+)$"
+      ],
+      "datasourceTemplate": "github-releases",
+      "depNameTemplate": "meshtastic/web",
+      "versioningTemplate": "semver-coerced"
+    },
+    {
+      "customType": "regex",
+      "description": "Match normal PIO dependencies",
+      "managerFilePatterns": [
+        "/.*\\.ini$/"
+      ],
+      "matchStrings": [
+        "# renovate: datasource=(?<datasource>.*?)(?: depName=(?<depName>.+?))? packageName=(?<packageName>.+?)(?: versioning=(?<versioning>[a-z-]+?))?\\s+?.+?@(?<currentValue>.+?)\\s"
+      ],
+      "versioningTemplate": "{{#if versioning}}{{{versioning}}}{{else}}semver-coerced{{/if}}"
+    },
+    {
+      "customType": "regex",
+      "description": "Match PIO zipped dependencies with github tag ref",
+      "managerFilePatterns": [
+        "/.*\\.ini$/"
+      ],
+      "matchStrings": [
+        "# renovate: datasource=github-tags(?: depName=(?<depName>.+?))? packageName=(?<packageName>.+?)(?: versioning=(?<versioning>[a-z-]+?))?\\s+?https://.+?archive/(?<currentValue>.+?).zip\\s"
+      ],
+      "datasourceTemplate": "github-tags",
+      "versioningTemplate": "{{#if versioning}}{{{versioning}}}{{else}}semver-coerced{{/if}}"
+    },
+    {
+      "customType": "regex",
+      "description": "Match PIO zipped dependencies with git commit ref",
+      "managerFilePatterns": [
+        "/.*\\.ini$/"
+      ],
+      "matchStrings": [
+        "# renovate: datasource=git-refs(?: depName=(?<depName>.+?))? packageName=(?<packageName>.+?)(?: versioning=(?<versioning>[a-z-]+?))?\\sgitBranch=(?<gitBranch>.+?)\\s+?https://.+?archive/(?<currentDigest>.+?).zip\\s"
+      ],
+      "datasourceTemplate": "git-refs",
+      "currentValueTemplate": "{{{gitBranch}}}",
+      "versioningTemplate": "{{#if versioning}}{{{versioning}}}{{else}}git{{/if}}"
+    }
+  ],
+  "packageRules": [
+    {
+      "matchDepNames": [
+        "meshtastic/device-ui"
+      ],
+      "reviewers": [
+        "mverch67"
+      ],
+      "changelogUrl": "https://github.com/meshtastic/device-ui/compare/{{currentDigest}}...{{newDigest}}"
+    }
+  ]
+}

src/AmbientLightingThread.h

@@ -6,6 +6,11 @@
 NCP5623 rgb;
 #endif
 
+#ifdef HAS_LP5562
+#include <graphics/NomadStarLED.h>
+LP5562 rgbw;
+#endif
+
 #ifdef HAS_NEOPIXEL
 #include <graphics/NeoPixel.h>
 Adafruit_NeoPixel pixels(NEOPIXEL_COUNT, NEOPIXEL_DATA, NEOPIXEL_TYPE);
@@ -26,7 +31,7 @@ class AmbientLightingThread : public concurrency::OSThread
         notifyDeepSleepObserver.observe(&notifyDeepSleep); // Let us know when shutdown() is issued.
 
 // Enables Ambient Lighting by default if conditions are meet.
-#if defined(HAS_NCP5623) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
+#ifdef HAS_RGB_LED
 #ifdef ENABLE_AMBIENTLIGHTING
         moduleConfig.ambient_lighting.led_state = true;
 #endif
@@ -39,7 +44,7 @@ class AmbientLightingThread : public concurrency::OSThread
         // moduleConfig.ambient_lighting.green = (myNodeInfo.my_node_num & 0x00FF00) >> 8;
         // moduleConfig.ambient_lighting.blue = myNodeInfo.my_node_num & 0x0000FF;
 
-#ifdef HAS_NCP5623
+#if defined(HAS_NCP5623) || defined(HAS_LP5562)
         _type = type;
         if (_type == ScanI2C::DeviceType::NONE) {
             LOG_DEBUG("AmbientLighting Disable due to no RGB leds found on I2C bus");
@@ -47,7 +52,7 @@ class AmbientLightingThread : public concurrency::OSThread
             return;
         }
 #endif
-#if defined(HAS_NCP5623) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
+#ifdef HAS_RGB_LED
         if (!moduleConfig.ambient_lighting.led_state) {
             LOG_DEBUG("AmbientLighting Disable due to moduleConfig.ambient_lighting.led_state OFF");
             disable();
@@ -58,66 +63,78 @@ class AmbientLightingThread : public concurrency::OSThread
         if (_type == ScanI2C::NCP5623) {
             rgb.begin();
 #endif
+#ifdef HAS_LP5562
+            if (_type == ScanI2C::LP5562) {
+                rgbw.begin();
+#endif
 #ifdef RGBLED_RED
-            pinMode(RGBLED_RED, OUTPUT);
+                pinMode(RGBLED_RED, OUTPUT);
-            pinMode(RGBLED_GREEN, OUTPUT);
+                pinMode(RGBLED_GREEN, OUTPUT);
-            pinMode(RGBLED_BLUE, OUTPUT);
+                pinMode(RGBLED_BLUE, OUTPUT);
 #endif
 #ifdef HAS_NEOPIXEL
-            pixels.begin(); // Initialise the pixel(s)
+                pixels.begin(); // Initialise the pixel(s)
-            pixels.clear(); // Set all pixel colors to 'off'
+                pixels.clear(); // Set all pixel colors to 'off'
-            pixels.setBrightness(moduleConfig.ambient_lighting.current);
+                pixels.setBrightness(moduleConfig.ambient_lighting.current);
 #endif
-            setLighting();
+                setLighting();
+#endif
+#if defined(HAS_NCP5623) || defined(HAS_LP5562)
+            }
 #endif
-#ifdef HAS_NCP5623
         }
-#endif
-    }
 
-  protected:
+      protected:
-    int32_t runOnce() override
+        int32_t runOnce() override
-    {
+        {
-#if defined(HAS_NCP5623) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
+#ifdef HAS_RGB_LED
-#ifdef HAS_NCP5623
+#if defined(HAS_NCP5623) || defined(HAS_LP5562)
-        if (_type == ScanI2C::NCP5623 && moduleConfig.ambient_lighting.led_state) {
+            if ((_type == ScanI2C::NCP5623 || _type == ScanI2C::LP5562) && moduleConfig.ambient_lighting.led_state) {
 #endif
-            setLighting();
+                setLighting();
-            return 30000; // 30 seconds to reset from any animations that may have been running from Ext. Notification
+                return 30000; // 30 seconds to reset from any animations that may have been running from Ext. Notification
-#ifdef HAS_NCP5623
+#if defined(HAS_NCP5623) || defined(HAS_LP5562)
+            }
+#endif
+#endif
+            return disable();
         }
-#endif
-#endif
-        return disable();
-    }
 
-    // When shutdown() is issued, setLightingOff will be called.
+        // When shutdown() is issued, setLightingOff will be called.
-    CallbackObserver<AmbientLightingThread, void *> notifyDeepSleepObserver =
+        CallbackObserver<AmbientLightingThread, void *> notifyDeepSleepObserver =
-        CallbackObserver<AmbientLightingThread, void *>(this, &AmbientLightingThread::setLightingOff);
+            CallbackObserver<AmbientLightingThread, void *>(this, &AmbientLightingThread::setLightingOff);
 
-  private:
+      private:
-    ScanI2C::DeviceType _type = ScanI2C::DeviceType::NONE;
+        ScanI2C::DeviceType _type = ScanI2C::DeviceType::NONE;
 
-    // Turn RGB lighting off, is used in junction to shutdown()
+        // Turn RGB lighting off, is used in junction to shutdown()
-    int setLightingOff(void *unused)
+        int setLightingOff(void *unused)
-    {
+        {
 #ifdef HAS_NCP5623
-        rgb.setCurrent(0);
+            rgb.setCurrent(0);
-        rgb.setRed(0);
+            rgb.setRed(0);
-        rgb.setGreen(0);
+            rgb.setGreen(0);
-        rgb.setBlue(0);
+            rgb.setBlue(0);
-        LOG_INFO("OFF: NCP5623 Ambient lighting");
+            LOG_INFO("OFF: NCP5623 Ambient lighting");
+#endif
+#ifdef HAS_LP5562
+            rgbw.setCurrent(0);
+            rgbw.setRed(0);
+            rgbw.setGreen(0);
+            rgbw.setBlue(0);
+            rgbw.setWhite(0);
+            LOG_INFO("OFF: LP5562 Ambient lighting");
 #endif
 #ifdef HAS_NEOPIXEL
-        pixels.clear();
+            pixels.clear();
-        pixels.show();
+            pixels.show();
-        LOG_INFO("OFF: NeoPixel Ambient lighting");
+            LOG_INFO("OFF: NeoPixel Ambient lighting");
 #endif
 #ifdef RGBLED_CA
-        analogWrite(RGBLED_RED, 255 - 0);
+            analogWrite(RGBLED_RED, 255 - 0);
-        analogWrite(RGBLED_GREEN, 255 - 0);
+            analogWrite(RGBLED_GREEN, 255 - 0);
-        analogWrite(RGBLED_BLUE, 255 - 0);
+            analogWrite(RGBLED_BLUE, 255 - 0);
-        LOG_INFO("OFF: Ambient light RGB Common Anode");
+            LOG_INFO("OFF: Ambient light RGB Common Anode");
 #elif defined(RGBLED_RED)
         analogWrite(RGBLED_RED, 0);
         analogWrite(RGBLED_GREEN, 0);
@@ -125,48 +142,57 @@ class AmbientLightingThread : public concurrency::OSThread
         LOG_INFO("OFF: Ambient light RGB Common Cathode");
 #endif
 #ifdef UNPHONE
-        unphone.rgb(0, 0, 0);
+            unphone.rgb(0, 0, 0);
-        LOG_INFO("OFF: unPhone Ambient lighting");
+            LOG_INFO("OFF: unPhone Ambient lighting");
 #endif
-        return 0;
+            return 0;
-    }
+        }
 
-    void setLighting()
+        void setLighting()
-    {
+        {
 #ifdef HAS_NCP5623
-        rgb.setCurrent(moduleConfig.ambient_lighting.current);
+            rgb.setCurrent(moduleConfig.ambient_lighting.current);
-        rgb.setRed(moduleConfig.ambient_lighting.red);
+            rgb.setRed(moduleConfig.ambient_lighting.red);
-        rgb.setGreen(moduleConfig.ambient_lighting.green);
+            rgb.setGreen(moduleConfig.ambient_lighting.green);
-        rgb.setBlue(moduleConfig.ambient_lighting.blue);
+            rgb.setBlue(moduleConfig.ambient_lighting.blue);
-        LOG_DEBUG("Init NCP5623 Ambient light w/ current=%d, red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.current,
+            LOG_DEBUG("Init NCP5623 Ambient light w/ current=%d, red=%d, green=%d, blue=%d",
-                  moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+                      moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red,
+                      moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+#endif
+#ifdef HAS_LP5562
+            rgbw.setCurrent(moduleConfig.ambient_lighting.current);
+            rgbw.setRed(moduleConfig.ambient_lighting.red);
+            rgbw.setGreen(moduleConfig.ambient_lighting.green);
+            rgbw.setBlue(moduleConfig.ambient_lighting.blue);
+            LOG_DEBUG("Init LP5562 Ambient light w/ current=%d, red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.current,
+                      moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef HAS_NEOPIXEL
-        pixels.fill(pixels.Color(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
+            pixels.fill(pixels.Color(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
-                                 moduleConfig.ambient_lighting.blue),
+                                     moduleConfig.ambient_lighting.blue),
-                    0, NEOPIXEL_COUNT);
+                        0, NEOPIXEL_COUNT);
 
 // RadioMaster Bandit has addressable LED at the two buttons
 // this allow us to set different lighting for them in variant.h file.
 #ifdef RADIOMASTER_900_BANDIT
 #if defined(BUTTON1_COLOR) && defined(BUTTON1_COLOR_INDEX)
-        pixels.fill(BUTTON1_COLOR, BUTTON1_COLOR_INDEX, 1);
+            pixels.fill(BUTTON1_COLOR, BUTTON1_COLOR_INDEX, 1);
 #endif
 #if defined(BUTTON2_COLOR) && defined(BUTTON2_COLOR_INDEX)
-        pixels.fill(BUTTON2_COLOR, BUTTON2_COLOR_INDEX, 1);
+            pixels.fill(BUTTON2_COLOR, BUTTON2_COLOR_INDEX, 1);
 #endif
 #endif
-        pixels.show();
+            pixels.show();
-        LOG_DEBUG("Init NeoPixel Ambient light w/ brightness(current)=%d, red=%d, green=%d, blue=%d",
+            LOG_DEBUG("Init NeoPixel Ambient light w/ brightness(current)=%d, red=%d, green=%d, blue=%d",
-                  moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
+                      moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red,
-                  moduleConfig.ambient_lighting.blue);
+                      moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef RGBLED_CA
-        analogWrite(RGBLED_RED, 255 - moduleConfig.ambient_lighting.red);
+            analogWrite(RGBLED_RED, 255 - moduleConfig.ambient_lighting.red);
-        analogWrite(RGBLED_GREEN, 255 - moduleConfig.ambient_lighting.green);
+            analogWrite(RGBLED_GREEN, 255 - moduleConfig.ambient_lighting.green);
-        analogWrite(RGBLED_BLUE, 255 - moduleConfig.ambient_lighting.blue);
+            analogWrite(RGBLED_BLUE, 255 - moduleConfig.ambient_lighting.blue);
-        LOG_DEBUG("Init Ambient light RGB Common Anode w/ red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.red,
+            LOG_DEBUG("Init Ambient light RGB Common Anode w/ red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.red,
-                  moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+                      moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #elif defined(RGBLED_RED)
         analogWrite(RGBLED_RED, moduleConfig.ambient_lighting.red);
         analogWrite(RGBLED_GREEN, moduleConfig.ambient_lighting.green);
@@ -175,11 +201,12 @@ class AmbientLightingThread : public concurrency::OSThread
                   moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef UNPHONE
-        unphone.rgb(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+            unphone.rgb(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
-        LOG_DEBUG("Init unPhone Ambient light w/ red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.red,
+                        moduleConfig.ambient_lighting.blue);
-                  moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+            LOG_DEBUG("Init unPhone Ambient light w/ red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.red,
+                      moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
-    }
+        }
-};
+    };
 
 } // namespace concurrency