rbxii3/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2025-12-30 22:50:57 +00:00
Code Issues Packages Projects Releases Wiki Activity

Crowpanel 2.4,2.8 and 3.5 support (#6355)

Browse Source 
Co-authored-by: mverch67 <manuel.verch@gmx.de>
This commit is contained in:
Thomas Göttgens
2025-04-17 16:03:37 +02:00
committed by GitHub
parent c177c6d655
commit ef14967fbf
14 changed files with 789 additions and 32 deletions
Download Patch File Download Diff File Expand all files Collapse all files

12
src/graphics/Screen.cpp
View File

@@ -1104,7 +1104,7 @@ static void drawNodes(OLEDDisplay *display, int16_t x, int16_t y, const NodeStat
char usersString[20];
snprintf(usersString, sizeof(usersString), "%d/%d", nodeStatus->getNumOnline(), nodeStatus->getNumTotal());
#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || \
defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS)) && \
defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS)) && \
!defined(DISPLAY_FORCE_SMALL_FONTS)
display->drawFastImage(x, y + 3, 8, 8, imgUser);
#else
@@ -1545,7 +1545,7 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
dispdev = new SSD1306Wire(address.address, -1, -1, geometry,
(address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
#elif defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7789_CS) || \
defined(RAK14014) || defined(HX8357_CS)
defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS)
dispdev = new TFTDisplay(address.address, -1, -1, geometry,
(address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
#elif defined(USE_EINK) && !defined(USE_EINK_DYNAMICDISPLAY)
@@ -1751,7 +1751,7 @@ void Screen::setup()
// flip it. If you have a headache now, you're welcome.
if (!config.display.flip_screen) {
#if defined(ST7701_CS) || defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || \
defined(ST7789_CS) || defined(RAK14014) || defined(HX8357_CS)
defined(ST7789_CS) || defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS)
static_cast<TFTDisplay *>(dispdev)->flipScreenVertically();
#elif defined(USE_ST7789)
static_cast<ST7789Spi *>(dispdev)->flipScreenVertically();
@@ -2492,7 +2492,7 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
if (!Throttle::isWithinTimespanMs(storeForwardModule->lastHeartbeat,
(storeForwardModule->heartbeatInterval * 1200))) { // no heartbeat, overlap a bit
#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || \
defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || ARCH_PORTDUINO) && \
defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || ARCH_PORTDUINO) && \
!defined(DISPLAY_FORCE_SMALL_FONTS)
display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8,
imgQuestionL1);
@@ -2504,7 +2504,7 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
#endif
} else {
#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || \
defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS)) && \
defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS)) && \
!defined(DISPLAY_FORCE_SMALL_FONTS)
display->drawFastImage(x + SCREEN_WIDTH - 18 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 16, 8,
imgSFL1);
@@ -2519,7 +2519,7 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
} else {
// TODO: Raspberry Pi supports more than just the one screen size
#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || \
defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || ARCH_PORTDUINO) && \
defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || ARCH_PORTDUINO) && \
!defined(DISPLAY_FORCE_SMALL_FONTS)
display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8,
imgInfoL1);

4
src/graphics/ScreenFonts.h
View File

@@ -65,8 +65,8 @@
#endif
#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || \
defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS)) && \
!defined(DISPLAY_FORCE_SMALL_FONTS)
defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS)) || \
defined(ILI9488_CS) && !defined(DISPLAY_FORCE_SMALL_FONTS)
// The screen is bigger so use bigger fonts
#define FONT_SMALL FONT_MEDIUM_LOCAL // Height: 19
#define FONT_MEDIUM FONT_LARGE_LOCAL // Height: 28

330
src/graphics/TFTDisplay.cpp
View File

@@ -120,6 +120,303 @@ static void rak14014_tpIntHandle(void)
_rak14014_touch_int = true;
}
#elif defined(ST72xx_DE)
#include <LovyanGFX.hpp>
#include <TCA9534.h>
#include <lgfx/v1/platforms/esp32s3/Bus_RGB.hpp>
#include <lgfx/v1/platforms/esp32s3/Panel_RGB.hpp>
TCA9534 ioex;
class LGFX : public lgfx::LGFX_Device
{
lgfx::Bus_RGB _bus_instance;
lgfx::Panel_RGB _panel_instance;
lgfx::Touch_GT911 _touch_instance;
public:
const uint16_t screenWidth = TFT_WIDTH;
const uint16_t screenHeight = TFT_HEIGHT;
bool init_impl(bool use_reset, bool use_clear) override
{
ioex.attach(Wire);
ioex.setDeviceAddress(0x18);
ioex.config(1, TCA9534::Config::OUT);
ioex.config(2, TCA9534::Config::OUT);
ioex.config(3, TCA9534::Config::OUT);
ioex.config(4, TCA9534::Config::OUT);
ioex.output(1, TCA9534::Level::H);
ioex.output(3, TCA9534::Level::L);
ioex.output(4, TCA9534::Level::H);
pinMode(1, OUTPUT);
digitalWrite(1, LOW);
ioex.output(2, TCA9534::Level::L);
delay(20);
ioex.output(2, TCA9534::Level::H);
delay(100);
pinMode(1, INPUT);
return LGFX_Device::init_impl(use_reset, use_clear);
}
LGFX(void)
{
{
auto cfg = _panel_instance.config();
cfg.memory_width = screenWidth;
cfg.memory_height = screenHeight;
cfg.panel_width = screenWidth;
cfg.panel_height = screenHeight;
cfg.offset_x = 0;
cfg.offset_y = 0;
cfg.offset_rotation = 0;
_panel_instance.config(cfg);
}
{
auto cfg = _panel_instance.config_detail();
cfg.use_psram = 0;
_panel_instance.config_detail(cfg);
}
{
auto cfg = _bus_instance.config();
cfg.panel = &_panel_instance;
cfg.pin_d0 = ST72xx_B0; // B0
cfg.pin_d1 = ST72xx_B1; // B1
cfg.pin_d2 = ST72xx_B2; // B2
cfg.pin_d3 = ST72xx_B3; // B3
cfg.pin_d4 = ST72xx_B4; // B4
cfg.pin_d5 = ST72xx_G0; // G0
cfg.pin_d6 = ST72xx_G1; // G1
cfg.pin_d7 = ST72xx_G2; // G2
cfg.pin_d8 = ST72xx_G3; // G3
cfg.pin_d9 = ST72xx_G4; // G4
cfg.pin_d10 = ST72xx_G5; // G5
cfg.pin_d11 = ST72xx_R0; // R0
cfg.pin_d12 = ST72xx_R1; // R1
cfg.pin_d13 = ST72xx_R2; // R2
cfg.pin_d14 = ST72xx_R3; // R3
cfg.pin_d15 = ST72xx_R4; // R4
cfg.pin_henable = ST72xx_DE;
cfg.pin_vsync = ST72xx_VSYNC;
cfg.pin_hsync = ST72xx_HSYNC;
cfg.pin_pclk = ST72xx_PCLK;
cfg.freq_write = 13000000;
#ifdef ST7265_HSYNC_POLARITY
cfg.hsync_polarity = ST7265_HSYNC_POLARITY;
cfg.hsync_front_porch = ST7265_HSYNC_FRONT_PORCH; // 8;
cfg.hsync_pulse_width = ST7265_HSYNC_PULSE_WIDTH; // 4;
cfg.hsync_back_porch = ST7265_HSYNC_BACK_PORCH; // 8;
cfg.vsync_polarity = ST7265_VSYNC_POLARITY; // 0;
cfg.vsync_front_porch = ST7265_VSYNC_FRONT_PORCH; // 8;
cfg.vsync_pulse_width = ST7265_VSYNC_PULSE_WIDTH; // 4;
cfg.vsync_back_porch = ST7265_VSYNC_BACK_PORCH; // 8;
cfg.pclk_idle_high = 1;
cfg.pclk_active_neg = ST7265_PCLK_ACTIVE_NEG; // 0;
// cfg.pclk_idle_high = 0;
// cfg.de_idle_high = 1;
#endif
#ifdef ST7262_HSYNC_POLARITY
cfg.hsync_polarity = ST7262_HSYNC_POLARITY;
cfg.hsync_front_porch = ST7262_HSYNC_FRONT_PORCH; // 8;
cfg.hsync_pulse_width = ST7262_HSYNC_PULSE_WIDTH; // 4;
cfg.hsync_back_porch = ST7262_HSYNC_BACK_PORCH; // 8;
cfg.vsync_polarity = ST7262_VSYNC_POLARITY; // 0;
cfg.vsync_front_porch = ST7262_VSYNC_FRONT_PORCH; // 8;
cfg.vsync_pulse_width = ST7262_VSYNC_PULSE_WIDTH; // 4;
cfg.vsync_back_porch = ST7262_VSYNC_BACK_PORCH; // 8;
cfg.pclk_idle_high = 1;
cfg.pclk_active_neg = ST7262_PCLK_ACTIVE_NEG; // 0;
// cfg.pclk_idle_high = 0;
// cfg.de_idle_high = 1;
#endif
#ifdef SC7277_HSYNC_POLARITY
cfg.hsync_polarity = SC7277_HSYNC_POLARITY;
cfg.hsync_front_porch = SC7277_HSYNC_FRONT_PORCH; // 8;
cfg.hsync_pulse_width = SC7277_HSYNC_PULSE_WIDTH; // 4;
cfg.hsync_back_porch = SC7277_HSYNC_BACK_PORCH; // 8;
cfg.vsync_polarity = SC7277_VSYNC_POLARITY; // 0;
cfg.vsync_front_porch = SC7277_VSYNC_FRONT_PORCH; // 8;
cfg.vsync_pulse_width = SC7277_VSYNC_PULSE_WIDTH; // 4;
cfg.vsync_back_porch = SC7277_VSYNC_BACK_PORCH; // 8;
cfg.pclk_idle_high = 1;
cfg.pclk_active_neg = SC7277_PCLK_ACTIVE_NEG; // 0;
// cfg.pclk_idle_high = 0;
// cfg.de_idle_high = 1;
#endif
_bus_instance.config(cfg);
}
_panel_instance.setBus(&_bus_instance);
{
auto cfg = _touch_instance.config();
cfg.x_min = 0;
cfg.x_max = TFT_WIDTH;
cfg.y_min = 0;
cfg.y_max = TFT_HEIGHT;
cfg.pin_int = -1;
cfg.pin_rst = -1;
cfg.bus_shared = true;
cfg.offset_rotation = 0;
cfg.i2c_port = 0;
cfg.i2c_addr = 0x5D;
cfg.pin_sda = I2C_SDA;
cfg.pin_scl = I2C_SCL;
cfg.freq = 400000;
_touch_instance.config(cfg);
_panel_instance.setTouch(&_touch_instance);
}
setPanel(&_panel_instance);
}
};
static LGFX *tft = nullptr;
#elif defined(ILI9488_CS)
#include <LovyanGFX.hpp> // Graphics and font library for ILI9488 driver chip
class LGFX : public lgfx::LGFX_Device
{
lgfx::Panel_ILI9488 _panel_instance;
lgfx::Bus_SPI _bus_instance;
lgfx::Light_PWM _light_instance;
lgfx::Touch_GT911 _touch_instance;
public:
LGFX(void)
{
{
auto cfg = _bus_instance.config();
// configure SPI
cfg.spi_host = ILI9488_SPI_HOST; // ESP32-S2,S3,C3 : SPI2_HOST or SPI3_HOST / ESP32 : VSPI_HOST or HSPI_HOST
cfg.spi_mode = 0;
cfg.freq_write = SPI_FREQUENCY; // SPI clock for transmission (up to 80MHz, rounded to the value obtained by dividing
// 80MHz by an integer)
cfg.freq_read = SPI_READ_FREQUENCY; // SPI clock when receiving
cfg.spi_3wire = false; // Set to true if reception is done on the MOSI pin
cfg.use_lock = true; // Set to true to use transaction locking
cfg.dma_channel = SPI_DMA_CH_AUTO; // SPI_DMA_CH_AUTO; // Set DMA channel to use (0=not use DMA / 1=1ch / 2=ch /
// SPI_DMA_CH_AUTO=auto setting)
cfg.pin_sclk = ILI9488_SCK; // Set SPI SCLK pin number
cfg.pin_mosi = ILI9488_SDA; // Set SPI MOSI pin number
cfg.pin_miso = ILI9488_MISO; // Set SPI MISO pin number (-1 = disable)
cfg.pin_dc = ILI9488_RS; // Set SPI DC pin number (-1 = disable)
_bus_instance.config(cfg); // applies the set value to the bus.
_panel_instance.setBus(&_bus_instance); // set the bus on the panel.
}
{ // Set the display panel control.
auto cfg = _panel_instance.config(); // Gets a structure for display panel settings.
cfg.pin_cs = ILI9488_CS; // Pin number where CS is connected (-1 = disable)
cfg.pin_rst = -1; // Pin number where RST is connected (-1 = disable)
cfg.pin_busy = -1; // Pin number where BUSY is connected (-1 = disable)
// The following setting values ​​are general initial values ​​for each panel, so please comment out any
// unknown items and try them.
cfg.memory_width = TFT_WIDTH; // Maximum width supported by the driver IC
cfg.memory_height = TFT_HEIGHT; // Maximum height supported by the driver IC
cfg.panel_width = TFT_WIDTH; // actual displayable width
cfg.panel_height = TFT_HEIGHT; // actual displayable height
cfg.offset_x = TFT_OFFSET_X; // Panel offset amount in X direction
cfg.offset_y = TFT_OFFSET_Y; // Panel offset amount in Y direction
cfg.offset_rotation = TFT_OFFSET_ROTATION; // Rotation direction value offset 0~7 (4~7 is mirrored)
#ifdef TFT_DUMMY_READ_PIXELS
cfg.dummy_read_pixel = TFT_DUMMY_READ_PIXELS; // Number of bits for dummy read before pixel readout
#else
cfg.dummy_read_pixel = 9; // Number of bits for dummy read before pixel readout
#endif
cfg.dummy_read_bits = 1; // Number of bits for dummy read before non-pixel data read
cfg.readable = true; // Set to true if data can be read
cfg.invert = true; // Set to true if the light/darkness of the panel is reversed
cfg.rgb_order = false; // Set to true if the panel's red and blue are swapped
cfg.dlen_16bit =
false; // Set to true for panels that transmit data length in 16-bit units with 16-bit parallel or SPI
cfg.bus_shared = true; // If the bus is shared with the SD card, set to true (bus control with drawJpgFile etc.)
// Set the following only when the display is shifted with a driver with a variable number of pixels, such as the
// ST7735 or ILI9163.
// cfg.memory_width = TFT_WIDTH; // Maximum width supported by the driver IC
// cfg.memory_height = TFT_HEIGHT; // Maximum height supported by the driver IC
_panel_instance.config(cfg);
}
#ifdef ILI9488_BL
// Set the backlight control
{
auto cfg = _light_instance.config(); // Gets a structure for backlight settings.
cfg.pin_bl = ILI9488_BL; // Pin number to which the backlight is connected
cfg.invert = false; // true to invert the brightness of the backlight
// cfg.freq = 44100; // PWM frequency of backlight
// cfg.pwm_channel = 1; // PWM channel number to use
_light_instance.config(cfg);
_panel_instance.setLight(&_light_instance); // Set the backlight on the panel.
}
#endif
#if HAS_TOUCHSCREEN
// Configure settings for touch screen control.
{
auto cfg = _touch_instance.config();
cfg.pin_cs = -1;
cfg.x_min = 0;
cfg.x_max = TFT_HEIGHT - 1;
cfg.y_min = 0;
cfg.y_max = TFT_WIDTH - 1;
cfg.pin_int = SCREEN_TOUCH_INT;
#ifdef SCREEN_TOUCH_RST
cfg.pin_rst = SCREEN_TOUCH_RST;
#endif
cfg.bus_shared = true;
cfg.offset_rotation = TFT_OFFSET_ROTATION;
// cfg.freq = 2500000;
// I2C
cfg.i2c_port = TOUCH_I2C_PORT;
cfg.i2c_addr = TOUCH_SLAVE_ADDRESS;
#ifdef SCREEN_TOUCH_USE_I2C1
cfg.pin_sda = I2C_SDA1;
cfg.pin_scl = I2C_SCL1;
#else
cfg.pin_sda = I2C_SDA;
cfg.pin_scl = I2C_SCL;
#endif
// cfg.freq = 400000;
_touch_instance.config(cfg);
_panel_instance.setTouch(&_touch_instance);
}
#endif
setPanel(&_panel_instance);
}
};
static LGFX *tft = nullptr;
#elif defined(ST7789_CS)
#include <LovyanGFX.hpp> // Graphics and font library for ST7735 driver chip
@@ -129,7 +426,7 @@ class LGFX : public lgfx::LGFX_Device
lgfx::Bus_SPI _bus_instance;
lgfx::Light_PWM _light_instance;
#if HAS_TOUCHSCREEN
#ifdef T_WATCH_S3
#if defined(T_WATCH_S3) || defined(ELECROW)
lgfx::Touch_FT5x06 _touch_instance;
#else
lgfx::Touch_GT911 _touch_instance;
@@ -171,16 +468,22 @@ class LGFX : public lgfx::LGFX_Device
// The following setting values ​​are general initial values ​​for each panel, so please comment out any
// unknown items and try them.
cfg.panel_width = TFT_WIDTH; // actual displayable width
cfg.panel_height = TFT_HEIGHT; // actual displayable height
cfg.offset_x = TFT_OFFSET_X; // Panel offset amount in X direction
cfg.offset_y = TFT_OFFSET_Y; // Panel offset amount in Y direction
cfg.offset_rotation = TFT_OFFSET_ROTATION; // Rotation direction value offset 0~7 (4~7 is mirrored)
cfg.dummy_read_pixel = 9; // Number of bits for dummy read before pixel readout
cfg.dummy_read_bits = 1; // Number of bits for dummy read before non-pixel data read
cfg.readable = true; // Set to true if data can be read
cfg.invert = true; // Set to true if the light/darkness of the panel is reversed
cfg.rgb_order = false; // Set to true if the panel's red and blue are swapped
cfg.memory_width = TFT_WIDTH; // Maximum width supported by the driver IC
cfg.memory_height = TFT_HEIGHT; // Maximum height supported by the driver IC
cfg.panel_width = TFT_WIDTH; // actual displayable width
cfg.panel_height = TFT_HEIGHT; // actual displayable height
cfg.offset_x = TFT_OFFSET_X; // Panel offset amount in X direction
cfg.offset_y = TFT_OFFSET_Y; // Panel offset amount in Y direction
cfg.offset_rotation = TFT_OFFSET_ROTATION; // Rotation direction value offset 0~7 (4~7 is mirrored)
#ifdef TFT_DUMMY_READ_PIXELS
cfg.dummy_read_pixel = TFT_DUMMY_READ_PIXELS; // Number of bits for dummy read before pixel readout
#else
cfg.dummy_read_pixel = 9; // Number of bits for dummy read before pixel readout
#endif
cfg.dummy_read_bits = 1; // Number of bits for dummy read before non-pixel data read
cfg.readable = true; // Set to true if data can be read
cfg.invert = true; // Set to true if the light/darkness of the panel is reversed
cfg.rgb_order = false; // Set to true if the panel's red and blue are swapped
cfg.dlen_16bit =
false; // Set to true for panels that transmit data length in 16-bit units with 16-bit parallel or SPI
cfg.bus_shared = true; // If the bus is shared with the SD card, set to true (bus control with drawJpgFile etc.)
@@ -217,6 +520,9 @@ class LGFX : public lgfx::LGFX_Device
cfg.y_min = 0;
cfg.y_max = TFT_WIDTH - 1;
cfg.pin_int = SCREEN_TOUCH_INT;
#ifdef SCREEN_TOUCH_RST
cfg.pin_rst = SCREEN_TOUCH_RST;
#endif
cfg.bus_shared = true;
cfg.offset_rotation = TFT_OFFSET_ROTATION;
// cfg.freq = 2500000;
@@ -640,7 +946,7 @@ static LGFX *tft = nullptr;
#endif
#if defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || \
defined(RAK14014) || defined(HX8357_CS) || (ARCH_PORTDUINO && HAS_SCREEN != 0)
defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST72xx_DE) || (ARCH_PORTDUINO && HAS_SCREEN != 0)
#include "SPILock.h"
#include "TFTDisplay.h"
#include <SPI.h>

2
src/graphics/images.h
View File

@@ -21,7 +21,7 @@ const uint8_t bluetoothConnectedIcon[36] PROGMEM = {0xfe, 0x01, 0xff, 0x03, 0x03
#endif
#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || \
defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || ARCH_PORTDUINO) && \
defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || ARCH_PORTDUINO) && \
!defined(DISPLAY_FORCE_SMALL_FONTS)
const uint8_t imgQuestionL1[] PROGMEM = {0xff, 0x01, 0x01, 0x32, 0x7b, 0x49, 0x49, 0x6f, 0x26, 0x01, 0x01, 0xff};
const uint8_t imgQuestionL2[] PROGMEM = {0x0f, 0x08, 0x08, 0x08, 0x06, 0x0f, 0x0f, 0x06, 0x08, 0x08, 0x08, 0x0f};