Merge branch 'master' into lora-type

2026-01-22 09:47:28 +00:00 · 2025-04-07 09:20:38 +02:00
parent 35ab9fab98 2125c03974
commit e6061b5370
539 changed files with 32202 additions and 3724 deletions
--- a/variants/CDEBYTE_E77-MBL/platformio.ini
+++ b/variants/CDEBYTE_E77-MBL/platformio.ini
@@ -0,0 +1,28 @@
+[env:CDEBYTE_E77-MBL]
+extends = stm32_base
+board = ebyte_e77_dev
+board_upload.maximum_size = 233472 ; reserve the last 28KB for filesystem
+board_level = extra
+build_flags =
+  ${stm32_base.build_flags}
+  -Ivariants/CDEBYTE_E77-MBL
+  -DSERIAL_UART_INSTANCE=1
+  -DPIN_SERIAL_RX=PA3
+  -DPIN_SERIAL_TX=PA2
+  -DHAL_DAC_MODULE_ONLY
+  -DHAL_RNG_MODULE_ENABLED
+  -DRADIOLIB_EXCLUDE_SX128X=1
+  -DRADIOLIB_EXCLUDE_SX127X=1
+  -DRADIOLIB_EXCLUDE_LR11X0=1
+  -DMESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR=1
+  -DMESHTASTIC_EXCLUDE_I2C=1
+  -DMESHTASTIC_EXCLUDE_WIFI=1
+  -DMESHTASTIC_EXCLUDE_BLUETOOTH=1
+  -DMESHTASTIC_EXCLUDE_GPS=1
+  -DMESHTASTIC_EXCLUDE_SCREEN=1
+  -DMESHTASTIC_EXCLUDE_MQTT=1
+  -DMESHTASTIC_EXCLUDE_POWERMON=1
+  ;-DPIO_FRAMEWORK_ARDUINO_NANOLIB_FLOAT_PRINTF
+  ;-DCFG_DEBUG
+
+upload_port = stlink
--- a/variants/CDEBYTE_E77-MBL/variant.h
+++ b/variants/CDEBYTE_E77-MBL/variant.h
@@ -0,0 +1,22 @@
+/*
+EByte E77-MBL series
+https://www.cdebyte.com/products/E77-900MBL-01
+https://www.cdebyte.com/products/E77-400MBL-01
+https://github.com/olliw42/mLRS-docu/blob/master/docs/EBYTE_E77_MBL.md
+*/
+
+/*
+This variant is a work in progress.
+Do not expect a working Meshtastic device with this target.
+*/
+
+#ifndef _VARIANT_EBYTE_E77_
+#define _VARIANT_EBYTE_E77_
+
+#define USE_STM32WLx
+
+#define LED_PIN PB4 // LED1
+// #define LED_PIN PB3 // LED2
+#define LED_STATE_ON 1
+
+#endif
--- a/variants/Dongle_nRF52840-pca10059-v1/platformio.ini
+++ b/variants/Dongle_nRF52840-pca10059-v1/platformio.ini
@@ -10,5 +10,5 @@ build_flags = ${nrf52840_base.build_flags} -Ivariants/Dongle_nRF52840-pca10059-v
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/Dongle_nRF52840-pca10059-v1>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  zinggjm/GxEPD2@^1.4.9
-debug_tool = jlink
+  zinggjm/GxEPD2@^1.6.2
+debug_tool = jlink
--- a/variants/ELECROW-ThinkNode-M1/nicheGraphics.h
+++ b/variants/ELECROW-ThinkNode-M1/nicheGraphics.h
@@ -0,0 +1,119 @@
+#pragma once
+
+#include "configuration.h"
+
+#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
+
+// InkHUD-specific components
+// ---------------------------
+#include "graphics/niche/InkHUD/InkHUD.h"
+
+// Applets
+#include "graphics/niche/InkHUD/Applets/User/AllMessage/AllMessageApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/DM/DMApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/Heard/HeardApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/Positions/PositionsApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/RecentsList/RecentsListApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/ThreadedMessage/ThreadedMessageApplet.h"
+
+// Shared NicheGraphics components
+// --------------------------------
+#include "graphics/niche/Drivers/Backlight/LatchingBacklight.h"
+#include "graphics/niche/Drivers/EInk/GDEY0154D67.h"
+#include "graphics/niche/Inputs/TwoButton.h"
+
+#include "graphics/niche/Fonts/FreeSans6pt7b.h"
+#include "graphics/niche/Fonts/FreeSans6pt8bCyrillic.h"
+#include <Fonts/FreeSans9pt7b.h>
+
+void setupNicheGraphics()
+{
+    using namespace NicheGraphics;
+
+    // SPI
+    // -----------------------------
+
+    // For NRF52 platforms, SPI pins are defined in variant.h, not passed to begin()
+    SPI1.begin();
+
+    // Driver
+    // -----------------------------
+
+    // Use E-Ink driver
+    Drivers::EInk *driver = new Drivers::GDEY0154D67; // Todo: confirm display model
+    driver->begin(&SPI1, PIN_EINK_DC, PIN_EINK_CS, PIN_EINK_BUSY, PIN_EINK_RES);
+
+    // InkHUD
+    // ----------------------------
+
+    InkHUD::InkHUD *inkhud = InkHUD::InkHUD::getInstance();
+
+    // Set the driver
+    inkhud->setDriver(driver);
+
+    // Set how many FAST updates per FULL update
+    // Set how unhealthy additional FAST updates beyond this number are
+    // Todo: observe the display's performance in-person and adjust accordingly.
+    // Currently set to the values given by Elecrow for EInkDynamicDisplay.
+    inkhud->setDisplayResilience(10, 1.5);
+
+    // Prepare fonts
+    InkHUD::Applet::fontLarge = InkHUD::AppletFont(FreeSans9pt7b);
+    InkHUD::Applet::fontSmall = InkHUD::AppletFont(FreeSans6pt7b);
+    /*
+    // Font localization demo: Cyrillic
+    InkHUD::Applet::fontSmall = InkHUD::AppletFont(FreeSans6pt8bCyrillic);
+    InkHUD::Applet::fontSmall.addSubstitutionsWin1251();
+    */
+
+    // Customize default settings
+    inkhud->persistence->settings.userTiles.maxCount = 2;              // Two applets side-by-side
+    inkhud->persistence->settings.rotation = 0;                        // To be confirmed?
+    inkhud->persistence->settings.optionalFeatures.batteryIcon = true; // Device definitely has a battery
+
+    // Setup backlight
+    // Note: button mapping for this configured further down
+    Drivers::LatchingBacklight *backlight = Drivers::LatchingBacklight::getInstance();
+    backlight->setPin(PIN_EINK_EN);
+
+    // Pick applets
+    // Note: order of applets determines priority of "auto-show" feature
+    inkhud->addApplet("All Messages", new InkHUD::AllMessageApplet, true, true); // Activated, autoshown
+    inkhud->addApplet("DMs", new InkHUD::DMApplet);                              // Inactive
+    inkhud->addApplet("Channel 0", new InkHUD::ThreadedMessageApplet(0));        // Inactive
+    inkhud->addApplet("Channel 1", new InkHUD::ThreadedMessageApplet(1));        // Inactive
+    inkhud->addApplet("Positions", new InkHUD::PositionsApplet, true);           // Activated
+    inkhud->addApplet("Recents List", new InkHUD::RecentsListApplet);            // Inactive
+    inkhud->addApplet("Heard", new InkHUD::HeardApplet, true, false, 0);         // Activated, no autoshow, default on tile 0
+
+    // Start running InkHUD
+    inkhud->begin();
+
+    // Buttons
+    // --------------------------
+
+    Inputs::TwoButton *buttons = Inputs::TwoButton::getInstance(); // Shared NicheGraphics component
+
+    // As labeled on Elecrow diagram: https://www.elecrow.com/download/product/CIL12901M/ThinkNode-M1_User_Manual.pdf
+    constexpr uint8_t PAGE_TURN_BUTTON = 0;
+    constexpr uint8_t FUNCTION_BUTTON = 1;
+
+    // Setup the main user button
+    buttons->setWiring(PAGE_TURN_BUTTON, PIN_BUTTON2);
+    buttons->setTiming(PAGE_TURN_BUTTON, 50, 500); // Todo: confirm 50ms is adequate debounce
+    buttons->setHandlerShortPress(PAGE_TURN_BUTTON, []() { InkHUD::InkHUD::getInstance()->shortpress(); });
+    buttons->setHandlerLongPress(PAGE_TURN_BUTTON, []() { InkHUD::InkHUD::getInstance()->longpress(); });
+
+    // Setup the aux button
+    // Initial testing only: mapped to the backlight
+    // Todo: additional features
+    buttons->setWiring(FUNCTION_BUTTON, PIN_BUTTON1);
+    buttons->setTiming(FUNCTION_BUTTON, 50, 500); // 500ms before latch
+    buttons->setHandlerDown(FUNCTION_BUTTON, [backlight]() { backlight->peek(); });
+    buttons->setHandlerLongPress(FUNCTION_BUTTON, [backlight]() { backlight->latch(); });
+    buttons->setHandlerShortPress(FUNCTION_BUTTON, [backlight]() { backlight->off(); });
+
+    buttons->start();
+}
+
+#endif
--- a/variants/ELECROW-ThinkNode-M1/platformio.ini
+++ b/variants/ELECROW-ThinkNode-M1/platformio.ini
@@ -0,0 +1,49 @@
+; First prototype eink/nrf52840/sx1262 device
+[env:thinknode_m1]
+extends = nrf52840_base
+board = ThinkNode-M1
+board_check = true
+debug_tool = jlink
+
+# add -DCFG_SYSVIEW if you want to use the Segger systemview tool for OS profiling.
+build_flags = ${nrf52840_base.build_flags} -Ivariants/ELECROW-ThinkNode-M1
+  -DELECROW_ThinkNode_M1
+  -DGPS_POWER_TOGGLE
+  -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard"
+  -DUSE_EINK
+  -DEINK_DISPLAY_MODEL=GxEPD2_154_D67
+  -DEINK_WIDTH=200
+  -DEINK_HEIGHT=200
+  -DUSE_EINK_DYNAMICDISPLAY            ; Enable Dynamic EInk
+  -DEINK_LIMIT_FASTREFRESH=10          ; How many consecutive fast-refreshes are permitted    //20
+  -DEINK_LIMIT_RATE_BACKGROUND_SEC=10  ; Minimum interval between BACKGROUND updates          //30
+  -DEINK_LIMIT_RATE_RESPONSIVE_SEC=1   ; Minimum interval between RESPONSIVE updates
+;   -DEINK_LIMIT_GHOSTING_PX=2000        ; (Optional) How much image ghosting is tolerated
+  -DEINK_BACKGROUND_USES_FAST          ; (Optional) Use FAST refresh for both BACKGROUND and RESPONSIVE, until a limit is reached.
+
+build_src_filter = ${nrf52_base.build_src_filter} +<../variants/ELECROW-ThinkNode-M1>
+lib_deps = 
+  ${nrf52840_base.lib_deps}
+  https://github.com/meshtastic/GxEPD2/archive/33db3fa8ee6fc47d160bdb44f8f127c9a9203a10.zip
+  lewisxhe/PCF8563_Library@^1.0.1
+  khoih-prog/nRF52_PWM@^1.0.1
+;upload_protocol = fs
+
+[env:thinknode_m1-inkhud]
+extends = nrf52840_base, inkhud
+board = ThinkNode-M1
+board_check = true
+debug_tool = jlink
+build_flags = 
+  ${nrf52840_base.build_flags}
+  ${inkhud.build_flags}
+  -I variants/ELECROW-ThinkNode-M1
+  -D ELECROW_ThinkNode_M1
+  -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard"
+build_src_filter = 
+  ${nrf52_base.build_src_filter} 
+  ${inkhud.build_src_filter}
+lib_deps = 
+  ${inkhud.lib_deps} ; InkHUD libs first, so we get GFXRoot instead of AdafruitGFX
+  ${nrf52840_base.lib_deps}
+  lewisxhe/PCF8563_Library@^1.0.1
--- a/variants/ELECROW-ThinkNode-M1/variant.cpp
+++ b/variants/ELECROW-ThinkNode-M1/variant.cpp
@@ -0,0 +1,44 @@
+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  Copyright (c) 2016 Sandeep Mistry All right reserved.
+  Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#include "variant.h"
+#include "nrf.h"
+#include "wiring_constants.h"
+#include "wiring_digital.h"
+
+const uint32_t g_ADigitalPinMap[] = {
+    // P0 - pins 0 and 1 are hardwired for xtal and should never be enabled
+    0xff, 0xff, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+
+    // P1
+    32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
+
+void initVariant()
+{
+    // LED1 & LED2
+    pinMode(PIN_LED1, OUTPUT);
+    ledOff(PIN_LED1);
+
+    pinMode(PIN_LED2, OUTPUT);
+    ledOff(PIN_LED2);
+
+    pinMode(PIN_LED3, OUTPUT);
+    ledOff(PIN_LED3);
+}
--- a/variants/ELECROW-ThinkNode-M1/variant.h
+++ b/variants/ELECROW-ThinkNode-M1/variant.h
@@ -0,0 +1,203 @@
+/*
+ Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+ Copyright (c) 2016 Sandeep Mistry All right reserved.
+ Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ See the GNU Lesser General Public License for more details.
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef _VARIANT_ELECROW_EINK_V1_0_
+#define _VARIANT_ELECROW_EINK_V1_0_
+
+/** Master clock frequency */
+#define VARIANT_MCK (64000000ul)
+
+#define USE_LFXO // Board uses 32khz crystal for LF
+
+/*----------------------------------------------------------------------------
+ *        Headers
+ *----------------------------------------------------------------------------*/
+
+#include "WVariant.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif // __cplusplus
+
+// Number of pins defined in PinDescription array
+// 在PinDescription数组中定义的引脚数
+#define PINS_COUNT (48)
+#define NUM_DIGITAL_PINS (48)
+#define NUM_ANALOG_INPUTS (1)
+#define NUM_ANALOG_OUTPUTS (0)
+
+#define PIN_LED1 -1
+#define PIN_LED2 -1
+#define PIN_LED3 -1
+
+// LED
+#define POWER_LED (32 + 6) // red
+#define LED_POWER (32 + 4)
+#define USER_LED (0 + 13) // green
+// USB_CHECK
+#define USB_CHECK (32 + 3)
+#define ADC_V (0 + 8)
+
+#define LED_RED PIN_LED3
+#define LED_BLUE PIN_LED1
+#define LED_GREEN PIN_LED2
+#define LED_BUILTIN LED_BLUE
+#define LED_CONN PIN_GREEN
+#define LED_STATE_ON 0 // State when LED is lit  // LED灯亮时的状态
+#define M1_buzzer (0 + 6)
+/*
+ * Buttons
+ */
+#define PIN_BUTTON2 (32 + 10)
+#define PIN_BUTTON1 (32 + 7)
+
+// #define PIN_BUTTON1 (0 + 11)
+// #define PIN_BUTTON1 (32 + 7)
+
+// #define BUTTON_CLICK_MS 400
+// #define BUTTON_TOUCH_MS 200
+
+/*
+ * Analog pins
+ */
+#define PIN_A0 (4) // Battery ADC
+
+#define BATTERY_PIN PIN_A0
+
+static const uint8_t A0 = PIN_A0;
+
+#define ADC_RESOLUTION 14
+
+#define PIN_NFC1 (9)
+#define PIN_NFC2 (10)
+
+/*Wire Interfaces*/
+#define WIRE_INTERFACES_COUNT 1
+
+#define PIN_WIRE_SDA (26)
+#define PIN_WIRE_SCL (27)
+
+/* touch sensor, active high */
+
+#define TP_SER_IO (0 + 11)
+
+#define PIN_RTC_INT (0 + 16) // Interrupt from the PCF8563 RTC
+
+/*
+External serial flash WP25R1635FZUIL0
+*/
+
+// QSPI Pins
+#define PIN_QSPI_SCK (32 + 14)
+#define PIN_QSPI_CS (32 + 15)
+#define PIN_QSPI_IO0 (32 + 12) // MOSI if using two bit interface
+#define PIN_QSPI_IO1 (32 + 13) // MISO if using two bit interface
+#define PIN_QSPI_IO2 (0 + 7)   // WP if using two bit interface (i.e. not used)
+#define PIN_QSPI_IO3 (0 + 5)   // HOLD if using two bit interface (i.e. not used)
+
+// On-board QSPI Flash
+#define EXTERNAL_FLASH_DEVICES MX25R1635F
+#define EXTERNAL_FLASH_USE_QSPI
+
+/*
+ * Lora radio
+ */
+#define SX126X_POWER_EN (0 + 21)
+#define USE_SX1262
+#define SX126X_CS (0 + 24) // FIXME - we really should define LORA_CS instead
+#define SX126X_DIO1 (0 + 20)
+// Note DIO2 is attached internally to the module to an analog switch for TX/RX switching
+// #define SX1262_DIO3 (0 + 21) // This is used as an *output* from the sx1262 and connected internally to power the tcxo, do not
+// drive from the main
+#define SX126X_BUSY (0 + 17)
+#define SX126X_RESET (0 + 25)
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 3.3
+
+#define PIN_EINK_EN (32 + 11) // Note: this is really just backlight power
+#define PIN_EINK_CS (0 + 30)
+#define PIN_EINK_BUSY (0 + 3)
+#define PIN_EINK_DC (0 + 28)
+#define PIN_EINK_RES (0 + 2)
+#define PIN_EINK_SCLK (0 + 31)
+#define PIN_EINK_MOSI (0 + 29) // also called SDI
+
+// Controls power for all peripherals (eink + GPS + LoRa + Sensor)
+#define PIN_POWER_EN (0 + 12)
+
+#define PIN_SPI1_MISO (32 + 7)
+#define PIN_SPI1_MOSI PIN_EINK_MOSI
+#define PIN_SPI1_SCK PIN_EINK_SCLK
+
+/*
+ * GPS pins
+ */
+// #define HAS_GPS 1
+#define GPS_L76K
+#define GPS_BAUDRATE 9600
+#define PIN_GPS_REINIT (32 + 5)  // An output to reset L76K GPS. As per datasheet, low for > 100ms will reset the L76K
+#define PIN_GPS_STANDBY (32 + 2) // An output to wake GPS, low means allow sleep, high means force wake
+// Seems to be missing on this new board
+// #define PIN_GPS_PPS (32 + 4)  // Pulse per second input from the GPS
+#define GPS_TX_PIN (32 + 9) // This is for bits going TOWARDS the CPU
+#define GPS_RX_PIN (32 + 8) // This is for bits going TOWARDS the GPS
+
+#define GPS_THREAD_INTERVAL 50
+
+#define PIN_GPS_PPS (32 + 1) // GPS开关判断
+
+#define PIN_SERIAL1_RX GPS_TX_PIN
+#define PIN_SERIAL1_TX GPS_RX_PIN
+
+// PCF8563 RTC Module
+#define PCF8563_RTC 0x51
+
+/*
+ * SPI Interfaces
+ */
+#define SPI_INTERFACES_COUNT 2
+
+// For LORA, spi 0
+#define PIN_SPI_MISO (0 + 23)
+#define PIN_SPI_MOSI (0 + 22)
+#define PIN_SPI_SCK (0 + 19)
+
+#define PIN_PWR_EN (0 + 6)
+
+// To debug via the segger JLINK console rather than the CDC-ACM serial device
+// #define USE_SEGGER
+
+// Battery
+// The battery sense is hooked to pin A0 (4)
+// it is defined in the anlaolgue pin section of this file
+// and has 12 bit resolution
+#define BATTERY_SENSE_RESOLUTION_BITS 12
+#define BATTERY_SENSE_RESOLUTION 4096.0
+#undef AREF_VOLTAGE
+#define AREF_VOLTAGE 3.0
+#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
+#define ADC_MULTIPLIER (2.02F)
+
+// #define HAS_RTC 0
+// #define HAS_SCREEN 0
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- a/variants/ELECROW-ThinkNode-M2/pins_arduino.h
+++ b/variants/ELECROW-ThinkNode-M2/pins_arduino.h
@@ -0,0 +1,28 @@
+// Need this file for ESP32-S3
+// No need to modify this file, changes to pins imported from variant.h
+// Most is similar to https://github.com/espressif/arduino-esp32/blob/master/variants/esp32s3/pins_arduino.h
+
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+#include <variant.h>
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+// Serial
+static const uint8_t TX = UART_TX;
+static const uint8_t RX = UART_RX;
+
+// Default SPI will be mapped to Radio
+static const uint8_t SS = LORA_CS;
+static const uint8_t SCK = LORA_SCK;
+static const uint8_t MOSI = LORA_MOSI;
+static const uint8_t MISO = LORA_MISO;
+
+// The default Wire will be mapped to PMU and RTC
+static const uint8_t SCL = I2C_SCL;
+static const uint8_t SDA = I2C_SDA;
+
+#endif /* Pins_Arduino_h */
--- a/variants/ELECROW-ThinkNode-M2/platformio.ini
+++ b/variants/ELECROW-ThinkNode-M2/platformio.ini
@@ -0,0 +1,7 @@
+[env:thinknode_m2]
+extends = esp32s3_base
+board = ESP32-S3-WROOM-1-N4
+build_flags =
+  ${esp32s3_base.build_flags}
+  -D ELECROW_ThinkNode_M2
+  -I variants/ELECROW-ThinkNode-M2
--- a/variants/ELECROW-ThinkNode-M2/variant.h
+++ b/variants/ELECROW-ThinkNode-M2/variant.h
@@ -0,0 +1,64 @@
+// Status
+#define LED_PIN_POWER 1
+#define BIAS_T_ENABLE LED_PIN_POWER
+#define BIAS_T_VALUE HIGH
+
+#define PIN_BUTTON1 47 // 功能键
+#define PIN_BUTTON2 4  // 电源键
+
+#define POWER_CFG
+#define POWER_CHRG 6
+#define POWER_FULL 42
+
+#define PIN_BUZZER 5
+
+#define I2C_SCL 15
+#define I2C_SDA 16
+
+#define UART_TX 43
+#define UART_RX 44
+
+#define VEXT_ENABLE 46 // for OLED
+#define VEXT_ON_VALUE HIGH
+
+#define SX126X_CS 10
+#define LORA_SCK 12
+#define LORA_MOSI 11
+#define LORA_MISO 13
+#define SX126X_RESET 21
+#define SX126X_BUSY 14
+#define SX126X_DIO1 3
+#define SX126X_DIO2_AS_RF_SWITCH
+// #define SX126X_DIO3 9
+#define SX126X_DIO3_TCXO_VOLTAGE 3.3
+
+#define SX126X_MAX_POWER 22 // SX126xInterface.cpp defaults to 22 if not defined, but here we define it for good practice
+#define USE_SX1262
+#define LORA_CS SX126X_CS // FIXME: for some reason both are used in /src
+#define LORA_DIO1 SX126X_DIO1
+#define SX126X_POWER_EN 48
+
+// Battery
+// #define BATTERY_PIN 2
+#define BATTERY_PIN 17
+// #define ADC_CHANNEL ADC1_GPIO2_CHANNEL
+#define ADC_CHANNEL ADC2_GPIO17_CHANNEL
+#define BATTERY_SENSE_RESOLUTION_BITS 12
+#define BATTERY_SENSE_RESOLUTION 4096.0
+#undef AREF_VOLTAGE
+#define AREF_VOLTAGE 3.0
+#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
+#define ADC_MULTIPLIER (1.548F)
+#define BAT_MEASURE_ADC_UNIT 2
+
+#define HAS_SCREEN 1
+#define USE_SH1106 1
+
+// PCF8563 RTC Module
+// #define PCF8563_RTC 0x51
+// #define PIN_RTC_INT 48 // Interrupt from the PCF8563 RTC
+#define HAS_RTC 0
+#define HAS_GPS 0
+
+#define BUTTON_PIN PIN_BUTTON1
+#define BUTTON_PIN_ALT PIN_BUTTON2
--- a/variants/ME25LS01-4Y10TD/platformio.ini
+++ b/variants/ME25LS01-4Y10TD/platformio.ini
@@ -12,4 +12,4 @@ lib_deps =
  ${nrf52840_base.lib_deps}
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 upload_protocol = nrfutil
-upload_port = /dev/ttyACM1
+;upload_port = /dev/ttyACM1
--- a/variants/ME25LS01-4Y10TD_e-ink/platformio.ini
+++ b/variants/ME25LS01-4Y10TD_e-ink/platformio.ini
@@ -13,7 +13,7 @@ board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/ME25LS01-4Y10TD_e-ink>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  zinggjm/GxEPD2@^1.5.8
+  zinggjm/GxEPD2@^1.6.2
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 upload_protocol = nrfutil
-upload_port = /dev/ttyACM1
+;upload_port = /dev/ttyACM1
--- a/variants/MS24SF1/platformio.ini
+++ b/variants/MS24SF1/platformio.ini
@@ -12,4 +12,4 @@ lib_deps =
  ${nrf52840_base.lib_deps}
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 upload_protocol = nrfutil
-upload_port = /dev/ttyACM1
+;upload_port = /dev/ttyACM1
--- a/variants/MakePython_nRF52840_eink/platformio.ini
+++ b/variants/MakePython_nRF52840_eink/platformio.ini
@@ -5,13 +5,13 @@ board = nordic_pca10059
 build_flags = ${nrf52840_base.build_flags} -Ivariants/MakePython_nRF52840_eink -D PRIVATE_HW
  -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard"
  -D PIN_EINK_EN
-build_src_filter = ${nrf52_base.build_src_filter} +<../variants/MakePython_nRF52840_eink>
-lib_deps = 
-  ${nrf52840_base.lib_deps}
-  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
-  zinggjm/GxEPD2@^1.4.9
  -DEINK_DISPLAY_MODEL=GxEPD2_290_T5D
  -DEINK_WIDTH=296
  -DEINK_HEIGHT=128
+build_src_filter = ${nrf52_base.build_src_filter} +<../variants/MakePython_nRF52840_eink>
+lib_deps = 
+  ${nrf52840_base.lib_deps}
+  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
+  zinggjm/GxEPD2@^1.6.2
 debug_tool = jlink
-;upload_port = /dev/ttyACM4
+;upload_port = /dev/ttyACM4
--- a/variants/MakePython_nRF52840_oled/platformio.ini
+++ b/variants/MakePython_nRF52840_oled/platformio.ini
@@ -7,5 +7,5 @@ build_flags = ${nrf52840_base.build_flags} -Ivariants/MakePython_nRF52840_oled -
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/MakePython_nRF52840_oled>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
+  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
 debug_tool = jlink
--- a/variants/TWC_mesh_v4/platformio.ini
+++ b/variants/TWC_mesh_v4/platformio.ini
@@ -6,5 +6,5 @@ build_flags = ${nrf52840_base.build_flags} -I variants/TWC_mesh_v4 -D TWC_mesh_v
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/TWC_mesh_v4>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  zinggjm/GxEPD2@^1.4.9
-debug_tool = jlink
+  zinggjm/GxEPD2@^1.6.2
+debug_tool = jlink
--- a/variants/canaryone/variant.h
+++ b/variants/canaryone/variant.h
@@ -123,7 +123,7 @@ static const uint8_t A0 = PIN_A0;
 */
 #define HAS_GPS 1
 #define GPS_UBLOX
-#define GPS_BAUDRATE 38400
+#define GPS_BAUDRATE 9600

 // #define PIN_GPS_WAKE (GPIO_PORT1 + 2) // An output to wake GPS, low means allow sleep, high means force wake
 // Seems to be missing on this new board
--- a/variants/chatter2/platformio.ini
+++ b/variants/chatter2/platformio.ini
@@ -9,4 +9,4 @@ build_flags =
  
 lib_deps =
  ${esp32_base.lib_deps}
-  lovyan03/LovyanGFX@^1.1.8
+  lovyan03/LovyanGFX@^1.2.0
--- a/variants/crowpanel-esp32s3-5-epaper/pins_arduino.h
+++ b/variants/crowpanel-esp32s3-5-epaper/pins_arduino.h
@@ -0,0 +1,26 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+// The default Wire will be mapped to PMU and RTC
+static const uint8_t SDA = 21;
+static const uint8_t SCL = 15;
+
+// Default SPI will be mapped to Radio
+static const uint8_t SS = 14;
+static const uint8_t MOSI = 8;
+static const uint8_t MISO = 9;
+static const uint8_t SCK = 3;
+
+#define SPI_MOSI (40)
+#define SPI_SCK (39)
+#define SPI_MISO (13)
+#define SPI_CS (10)
+// IO42 TF_3V3_CTL
+#define SDCARD_CS SPI_CS
+
+#endif /* Pins_Arduino_h */
--- a/variants/crowpanel-esp32s3-5-epaper/platformio.ini
+++ b/variants/crowpanel-esp32s3-5-epaper/platformio.ini
@@ -0,0 +1,83 @@
+[env:crowpanel-esp32s3-5-epaper]
+extends = esp32s3_base
+board_build.arduino.memory_type = qio_opi
+board_build.flash_mode = qio
+board_build.psram_type = opi
+board_upload.flash_size = 8MB
+board_upload.maximum_size = 8388608
+board_build.partitions = default_8MB.csv
+board = esp32-s3-devkitc-1
+;upload_port = /dev/ttyUSB0
+board_level = extra
+upload_protocol = esptool
+build_flags = 
+  ${esp32_base.build_flags} -D CROWPANEL_ESP32S3_5_EPAPER -I variants/crowpanel-esp32s3-5-epaper
+  -D PRIVATE_HW
+  -DBOARD_HAS_PSRAM
+  -DGPS_POWER_TOGGLE
+  -DEINK_DISPLAY_MODEL=GxEPD2_579_GDEY0579T93 ;https://www.good-display.com/product/439.html
+  -DEINK_WIDTH=792
+  -DEINK_HEIGHT=272
+  -DUSE_EINK_DYNAMICDISPLAY            ; Enable Dynamic EInk
+  -DEINK_LIMIT_FASTREFRESH=100          ; How many consecutive fast-refreshes are permitted
+  ;-DEINK_LIMIT_RATE_BACKGROUND_SEC=30  ; Minimum interval between BACKGROUND updates
+  ;-DEINK_LIMIT_RATE_RESPONSIVE_SEC=1 
+lib_deps =
+  ${esp32s3_base.lib_deps}
+  https://github.com/meshtastic/GxEPD2/archive/33db3fa8ee6fc47d160bdb44f8f127c9a9203a10.zip
+
+[env:crowpanel-esp32s3-4-epaper]
+extends = esp32s3_base
+board_build.arduino.memory_type = qio_opi
+board_build.flash_mode = qio
+board_build.psram_type = opi
+board_upload.flash_size = 8MB
+board_upload.maximum_size = 8388608
+board_build.partitions = default_8MB.csv
+board = esp32-s3-devkitc-1
+;upload_port = /dev/ttyUSB0
+board_level = extra
+upload_protocol = esptool
+build_flags = 
+  ${esp32_base.build_flags} -D CROWPANEL_ESP32S3_4_EPAPER -I variants/crowpanel-esp32s3-5-epaper
+  -D PRIVATE_HW
+  -DBOARD_HAS_PSRAM
+  -DGPS_POWER_TOGGLE
+  -DEINK_DISPLAY_MODEL=GxEPD2_420_GYE042A87   ; similar Panel: GDEY042T81 : https://www.good-display.com/product/386.html
+  -DEINK_WIDTH=400
+  -DEINK_HEIGHT=300
+  -DUSE_EINK_DYNAMICDISPLAY            ; Enable Dynamic EInk
+  -DEINK_LIMIT_FASTREFRESH=100          ; How many consecutive fast-refreshes are permitted
+  ;-DEINK_LIMIT_RATE_BACKGROUND_SEC=30  ; Minimum interval between BACKGROUND updates
+  ;-DEINK_LIMIT_RATE_RESPONSIVE_SEC=1 
+lib_deps =
+  ${esp32s3_base.lib_deps}
+  https://github.com/meshtastic/GxEPD2/archive/33db3fa8ee6fc47d160bdb44f8f127c9a9203a10.zip
+
+[env:crowpanel-esp32s3-2-epaper]
+extends = esp32s3_base
+board_build.arduino.memory_type = qio_opi
+board_build.flash_mode = qio
+board_build.psram_type = opi
+board_upload.flash_size = 8MB
+board_upload.maximum_size = 8388608
+board_build.partitions = default_8MB.csv
+board = esp32-s3-devkitc-1
+;upload_port = /dev/ttyUSB0
+board_level = extra
+upload_protocol = esptool
+build_flags = 
+  ${esp32_base.build_flags} -D CROWPANEL_ESP32S3_2_EPAPER -I variants/crowpanel-esp32s3-5-epaper
+  -D PRIVATE_HW
+  -DBOARD_HAS_PSRAM
+  -DGPS_POWER_TOGGLE
+  -DEINK_DISPLAY_MODEL=GxEPD2_290_GDEY029T94 ;https://www.good-display.com/product/389.html
+  -DEINK_WIDTH=296
+  -DEINK_HEIGHT=128
+  -DUSE_EINK_DYNAMICDISPLAY            ; Enable Dynamic EInk
+  -DEINK_LIMIT_FASTREFRESH=100          ; How many consecutive fast-refreshes are permitted
+  ;-DEINK_LIMIT_RATE_BACKGROUND_SEC=30  ; Minimum interval between BACKGROUND updates
+  ;-DEINK_LIMIT_RATE_RESPONSIVE_SEC=1 
+lib_deps =
+  ${esp32s3_base.lib_deps}
+  https://github.com/meshtastic/GxEPD2/archive/33db3fa8ee6fc47d160bdb44f8f127c9a9203a10.zip
--- a/variants/crowpanel-esp32s3-5-epaper/variant.h
+++ b/variants/crowpanel-esp32s3-5-epaper/variant.h
@@ -0,0 +1,77 @@
+#define HAS_SDCARD
+#define SDCARD_USE_SPI1
+
+// Display (E-Ink)
+#define USE_EINK
+#define PIN_EINK_CS 45
+#define PIN_EINK_BUSY 48
+#define PIN_EINK_DC 46
+#define PIN_EINK_RES 47
+#define PIN_EINK_SCLK 12
+#define PIN_EINK_MOSI 11
+#define VEXT_ENABLE 7 // e-ink power enable pin
+#define VEXT_ON_VALUE HIGH
+
+#define PIN_POWER_EN 42 // TF/SD Card Power Enable Pin
+
+// #define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to
+//  measure battery voltage ratio of voltage divider = 2.0 (assumption)
+// #define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage.
+// #define ADC_CHANNEL ADC1_GPIO1_CHANNEL
+
+#define I2C_SDA SDA // 21
+#define I2C_SCL SCL // 15
+
+#define GPS_DEFAULT_NOT_PRESENT 1
+// #define GPS_RX_PIN 44
+// #define GPS_TX_PIN 43
+
+#define LED_PIN 41
+#define BUTTON_PIN 2
+#define BUTTON_NEED_PULLUP
+
+// Buzzer - noisy ?
+#define PIN_BUZZER (0 + 18)
+
+// Wheel
+//  Up         6
+//  Push       5
+//  Down       4
+// MENU Top    2
+// EXIT Bottom 1
+
+// TTGO uses a common pinout for their SX1262 vs RF95 modules - both can be enabled and
+// we will probe at runtime for RF95 and if not found then probe for SX1262
+// #define USE_RF95 // RFM95/SX127x
+#define USE_SX1262
+// #define USE_SX1280
+
+#define LORA_SCK 3
+#define LORA_MISO 9
+#define LORA_MOSI 8
+#define LORA_CS 14
+#define LORA_RESET 38
+
+#define LORA_DIO1 16
+#define LORA_DIO2 17
+
+// per SX1262_Receive_Interrupt/utilities.h
+#ifdef USE_SX1262
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_DIO2
+#define SX126X_RESET LORA_RESET
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+#endif
+
+// per SX128x_Receive_Interrupt/utilities.h
+#ifdef USE_SX1280
+#define SX128X_CS LORA_CS
+#define SX128X_DIO1 LORA_DIO1
+#define SX128X_BUSY LORA_DIO2
+#define SX128X_RESET LORA_RESET
+#define SX128X_RXEN 21
+#define SX128X_TXEN 15
+#define SX128X_MAX_POWER 3
+#endif
--- a/variants/diy/nrf52_promicro_diy_tcxo/E80_RSSI_per_case.webp
+++ b/variants/diy/nrf52_promicro_diy_tcxo/E80_RSSI_per_case.webp
--- a/variants/diy/nrf52_promicro_diy_tcxo/readme.md
+++ b/variants/diy/nrf52_promicro_diy_tcxo/readme.md
@@ -0,0 +1,107 @@
+# Notes
+
+## General
+
+The pinout is contained in the variant.h file, and a [generic schematic](./Schematic_Pro-Micro_Pinouts%202024-12-14.pdf) is located in this directory.
+
+### Note on DIO2, RXEN, TXEN, and RF switching
+
+Several modules require external switching between transmit (Tx) and receive (Rx). This can be achieved using several methods:
+
+1. Link the TXEN pin on the radio module to DIO2 on the same module, and then connect RXEN on the radio module to pin 0.17 on the Pro-Micro.
+2. Use DIO2 to drive a logic inverter, so that when DIO2 is `high`, RXEN is `low`, and vice versa.
+3. Use DIO2 to drive a pair of MOSFETs or transistors to supply the same function.
+
+RXEN is not required to be connected if the selected module already has internal RF switching, or if external RF switching logic is already applied.
+Also worth noting that the Seeed WIO SX1262 in particular only has RXEN exposed (marked RF_SW) and has the DIO2-TXEN link internally.
+
+<details>
+
+<summary> The table of known modules is at the bottom of the variant.h, and reproduced here for convenience. </summary>
+
+| Mfr          | Module           | TCXO | RF Switch | Notes                                 |
+| ------------ | ---------------- | ---- | --------- | ------------------------------------- |
+| Ebyte        | E22-900M22S      | Yes  | Ext       |                                       |
+| Ebyte        | E22-900MM22S     | No   | Ext       |                                       |
+| Ebyte        | E22-900M30S      | Yes  | Ext       |                                       |
+| Ebyte        | E22-900M33S      | Yes  | Ext       | MAX_POWER must be set to 8 for this   |
+| Ebyte        | E220-900M22S     | No   | Ext       | LLCC68, looks like DIO3 not connected |
+| AI-Thinker   | RA-01SH          | No   | Int       | SX1262                                |
+| Heltec       | HT-RA62          | Yes  | Int       |                                       |
+| NiceRF       | Lora1262         | yes  | Int       |                                       |
+| Waveshare    | Core1262-HF      | yes  | Ext       |                                       |
+| Waveshare    | LoRa Node Module | yes  | Int       |                                       |
+| Seeed        | Wio-SX1262       | yes  | Ext       | Cute! DIO2/TXEN are not exposed       |
+| AI-Thinker   | RA-02            | No   | Int       | SX1278 **433mhz band only**           |
+| RF Solutions | RFM95            | No   | Int       | Untested                              |
+| Ebyte        | E80-900M2213S    | Yes  | Int       | LR1121 radio                          |
+
+</details>
+
+## LR1121 modules - E80 is the default
+
+The E80 from CDEbyte is the most obtainable module at present, and has been selected as the default option.
+
+Naturally, CDEbyte have chosen to ignore the generic Semtech impelementation of the RF switching logic and have supplied confusing and contradictory documentation, which is explained below.
+
+tl;dr: The E80 is chosen as the default. **If you wish to use another module, the table in `rfswitch.h` must be adjusted accordingly.**
+
+### E80 switching - the saga
+
+The CDEbyte implementation of the LR1121 is contained in their E80 module. As stated above, CDEbyte have chosen to ignore the generic Semtech implementation of the RF switching logic and have their own table, which is located at the bottom of the page [here](https://www.cdebyte.com/products/E80-900M2213S/2#Pin), and reflected on page 6 of their user manual, and reproduced below:
+
+| DIO5/RFSW0 | DIO6/RFSW1 | RF status                     |
+| ---------- | ---------- | ----------------------------- |
+| 0          | 0          | RX                            |
+| 0          | 1          | TX (Sub-1GHz low power mode)  |
+| 1          | 0          | TX (Sub-1GHz high power mode) |
+| 1          | 1          | TX（2.4GHz）                  |
+
+However, looking at the sample code they provide on page 9, the values would be:
+
+| DIO5/RFSW0 | DIO6/RFSW1 | RF status                     |
+| ---------- | ---------- | ----------------------------- |
+| 0          | 1          | RX                            |
+| 1          | 1          | TX (Sub-1GHz low power mode)  |
+| 1          | 0          | TX (Sub-1GHz high power mode) |
+| 0          | 0          | TX（2.4GHz）                  |
+
+The Semtech default, the values are (taken from [here](https://github.com/Lora-net/SWSD006/blob/v2.6.1/lib/app_subGHz_config_lr11xx.c#L145-L154)):
+
+<details>
+
+```cpp
+	.rfswitch = {
+		.enable = LR11XX_SYSTEM_RFSW0_HIGH | LR11XX_SYSTEM_RFSW1_HIGH | LR11XX_SYSTEM_RFSW2_HIGH,
+		.standby = 0,
+		.rx = LR11XX_SYSTEM_RFSW0_HIGH,
+		.tx = LR11XX_SYSTEM_RFSW0_HIGH | LR11XX_SYSTEM_RFSW1_HIGH,
+		.tx_hp = LR11XX_SYSTEM_RFSW1_HIGH,
+		.tx_hf = 0,
+		.gnss = LR11XX_SYSTEM_RFSW2_HIGH,
+		.wifi = 0,
+	},
+```
+
+</details>
+
+| DIO5/RFSW0 | DIO6/RFSW1 | RF status                     |
+| ---------- | ---------- | ----------------------------- |
+| 1          | 0          | RX                            |
+| 1          | 1          | TX (Sub-1GHz low power mode)  |
+| 0          | 1          | TX (Sub-1GHz high power mode) |
+| 0          | 0          | TX（2.4GHz）                  |
+
+It is evident from the tables above that there is no real consistency to those provided by Ebyte.
+
+#### An experiment
+
+Tests were conducted in each of the three configurations between a known-good SX1262 and an E80, passing packets in both directions and recording the reported RSSI. The E80 was set at 22db and 14db to activate the high and low power settings respectively. The results are shown in the chart below.
+
+![Chart showing RSSI readings in each configuration and setting](./E80_RSSI_per_case.webp)
+
+## Conclusion
+
+The RF switching is based on the code example given. Logically, this shows the DIO5 and DIO6 are swapped compared to the reference design.
+
+If future DIYers wish to use an alternative module, the table in `rfswitch.h` must be adjusted accordingly.
--- a/variants/diy/nrf52_promicro_diy_tcxo/rfswitch.h
+++ b/variants/diy/nrf52_promicro_diy_tcxo/rfswitch.h
@@ -1,17 +1,20 @@
 #include "RadioLib.h"

+// This is rewritten to match the requirements of the E80-900M2213S
+// The E80 does not conform to the reference Semtech switches(!) and therefore needs a custom matrix.
+// See footnote #3 in "https://www.cdebyte.com/products/E80-900M2213S/2#Pin"
 // RF Switch Matrix SubG RFO_HP_LF / RFO_LP_LF / RFI_[NP]_LF0
 // DIO5 -> RFSW0_V1
 // DIO6 -> RFSW1_V2
-// DIO7 -> ANT_CTRL_ON + ESP_IO9/LR_GPS_ANT_DC_EN -> RFI_GPS (Bias-T GPS) (LR11x0 only)
+// DIO7 -> not connected on E80 module - note that GNSS and Wifi scanning are not possible.

 static const uint32_t rfswitch_dio_pins[] = {RADIOLIB_LR11X0_DIO5, RADIOLIB_LR11X0_DIO6, RADIOLIB_LR11X0_DIO7, RADIOLIB_NC,
                                             RADIOLIB_NC};

 static const Module::RfSwitchMode_t rfswitch_table[] = {
    // mode                  DIO5  DIO6  DIO7
-    {LR11x0::MODE_STBY, {LOW, LOW, LOW}},  {LR11x0::MODE_RX, {HIGH, LOW, LOW}},
-    {LR11x0::MODE_TX, {LOW, HIGH, LOW}},   {LR11x0::MODE_TX_HP, {LOW, HIGH, LOW}},
+    {LR11x0::MODE_STBY, {LOW, LOW, LOW}},  {LR11x0::MODE_RX, {LOW, HIGH, LOW}},
+    {LR11x0::MODE_TX, {HIGH, HIGH, LOW}},  {LR11x0::MODE_TX_HP, {HIGH, LOW, LOW}},
    {LR11x0::MODE_TX_HF, {LOW, LOW, LOW}}, {LR11x0::MODE_GNSS, {LOW, LOW, HIGH}},
    {LR11x0::MODE_WIFI, {LOW, LOW, LOW}},  END_OF_MODE_TABLE,
-};
+};
--- a/variants/diy/nrf52_promicro_diy_tcxo/variant.h
+++ b/variants/diy/nrf52_promicro_diy_tcxo/variant.h
@@ -22,26 +22,26 @@ extern "C" {
 /*
 NRF52 PRO MICRO PIN ASSIGNMENT

-| Pin   | Function    |     | Pin      | Function     | RF95  |
+| Pin   | Function    |     | Pin      | Function     | RF95  |
 | ----- | ----------- | --- | -------- | ------------ | ----- |
-| Gnd   |             |     | vbat     |              |       |
-| P0.06 | Serial2 RX  |     | vbat     |              |       |
-| P0.08 | Serial2 TX  |     | Gnd      |              |       |
-| Gnd   |             |     | reset    |              |       |
-| Gnd   |             |     | ext_vcc  | *see 0.13    |       |
-| P0.17 | RXEN        |     | P0.31    | BATTERY_PIN  |       |
-| P0.20 | GPS_RX      |     | P0.29    | BUSY         | DIO0  |
-| P0.22 | GPS_TX      |     | P0.02    | MISO         | MISO  |
-| P0.24 | GPS_EN      |     | P1.15    | MOSI         | MOSI  |
-| P1.00 | BUTTON_PIN  |     | P1.13    | CS           | CS    |
-| P0.11 | SCL         |     | P1.11    | SCK          | SCK   |
-| P1.04 | SDA         |     | P0.10    | DIO1/IRQ     | DIO1  |
-| P1.06 | Free pin    |     | P0.09    | RESET        | RST   |
-|       |             |     |          |              |       |
-|       | Mid board   |     |          | Internal     |       |
-| P1.01 | Free pin    |     | 0.15     | LED          |       |
-| P1.02 | Free pin    |     | 0.13     | 3V3_EN       |       |
-| P1.07 | Free pin    |     |          |              |       |
+| Gnd   |             |     | vbat     |              |       |
+| P0.06 | Serial2 RX  |     | vbat     |              |       |
+| P0.08 | Serial2 TX  |     | Gnd      |              |       |
+| Gnd   |             |     | reset    |              |       |
+| Gnd   |             |     | ext_vcc  | *see 0.13    |       |
+| P0.17 | RXEN        |     | P0.31    | BATTERY_PIN  |       |
+| P0.20 | GPS_RX      |     | P0.29    | BUSY         | DIO0  |
+| P0.22 | GPS_TX      |     | P0.02    | MISO         | MISO  |
+| P0.24 | GPS_EN      |     | P1.15    | MOSI         | MOSI  |
+| P1.00 | BUTTON_PIN  |     | P1.13    | CS           | CS    |
+| P0.11 | SCL         |     | P1.11    | SCK          | SCK   |
+| P1.04 | SDA         |     | P0.10    | DIO1/IRQ     | DIO1  |
+| P1.06 | Free pin    |     | P0.09    | RESET        | RST   |
+|       |             |     |          |              |       |
+|       | Mid board   |     |          | Internal     |       |
+| P1.01 | Free pin    |     | 0.15     | LED          |       |
+| P1.02 | Free pin    |     | 0.13     | 3V3_EN       |       |
+| P1.07 | Free pin    |     |          |              |       |
 */

 // Number of pins defined in PinDescription array
@@ -175,7 +175,7 @@ settings.
 | NiceRF       | Lora1262         | yes  | Int       |                                       |
 | Waveshare    | Core1262-HF      | yes  | Ext       |                                       |
 | Waveshare    | LoRa Node Module | yes  | Int       |                                       |
-| Seeed        | Wio-SX1262       | yes  | Int       | Sooooo cute!                          |
+| Seeed        | Wio-SX1262       | yes  | Ext       | Cute! DIO2/TXEN are not exposed       |
 | AI-Thinker   | RA-02            | No   | Int       | SX1278 **433mhz band only**           |
 | RF Solutions | RFM95            | No   | Int       | Untested                              |
 | Ebyte        | E80-900M2213S    | Yes  | Int       | LR1121 radio                          |
@@ -183,8 +183,7 @@ settings.
 */

 #define SX126X_DIO3_TCXO_VOLTAGE 1.8
-#define TCXO_OPTIONAL     // make it so that the firmware can try both TCXO and XTAL
-extern float tcxoVoltage; // make this available everywhere
+#define TCXO_OPTIONAL // make it so that the firmware can try both TCXO and XTAL

 #ifdef __cplusplus
 }
@@ -194,4 +193,4 @@ extern float tcxoVoltage; // make this available everywhere
 *        Arduino objects - C++ only
 *----------------------------------------------------------------------------*/

-#endif
+#endif
--- a/variants/diy/platformio.ini
+++ b/variants/diy/platformio.ini
@@ -70,10 +70,25 @@ lib_deps =
  ${nrf52840_base.lib_deps}
 debug_tool = jlink

+; Seeed XIAO nRF52840 + XIAO Wio SX1262 DIY
+[env:seeed-xiao-nrf52840-wio-sx1262]
+board = xiao_ble_sense
+extends = nrf52840_base
+board_level = extra
+build_flags = ${nrf52840_base.build_flags} -Ivariants/diy/seeed-xiao-nrf52840-wio-sx1262 -D PRIVATE_HW
+  -Isrc/platform/nrf52/softdevice -Isrc/platform/nrf52/softdevice/nrf52
+  -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard"
+board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
+build_src_filter = ${nrf52_base.build_src_filter} +<../variants/diy/seeed-xiao-nrf52840-wio-sx1262>
+lib_deps =
+  ${nrf52840_base.lib_deps}
+debug_tool = jlink
+
 ; NanoVHF T-Energy-S3 + E22(0)-xxxM - DIY
 [env:t-energy-s3_e22]
 extends = esp32s3_base
 board = esp32-s3-devkitc-1
+board_build.partitions = default_16MB.csv
 board_level = extra
 board_upload.flash_size = 16MB ;Specify the FLASH capacity as 16MB
 board_build.arduino.memory_type = qio_opi ;Enable internal PSRAM
--- a/variants/diy/seeed-xiao-nrf52840-wio-sx1262/README.md
+++ b/variants/diy/seeed-xiao-nrf52840-wio-sx1262/README.md
@@ -0,0 +1,43 @@
+# XIAO nRF52840 + XIAO Wio SX1262
+
+For a mere doubling in price you too can swap out the XIAO ESP32C3 for a XIAO nRF52840, stack the Wio SX1262 radio board either above or underneath the nRF52840, solder the pins, and achieve a massive improvement in battery life!
+
+I'm not really sure why else you would want to as the ESP32C3 is perfectly cromulent, easily connects to the Wio SX1262 via the B2B connector and has an onboard IPEX connector for the included Bluetooth antenna. So you'll also lose BT range, but you will also have working ADC for the battery in Meshtastic and also have an ESP32C3 to use for something else!
+
+If you're still reading you are clearly gonna do it anyway, so...mount the Wio SX1262 either on top or underneath depending on your preference. The `variant.h` will work with either configuration though it does map the Wio SX1262's button to nRF52840 Pin `D5` as it can still be used as a user button and it's nice to be able to gracefully shutdown a node by holding it down for 5 seconds.
+
+If you do decide to wire up the button, orient it so looking straight-down at the Wio SX1262 the radio chip is at the bottom, button in the middle and the hole is at the top - the **left** side of the button should be soldered to `GND` (e.g. the 2nd pin down the top on the **right** row of pins) and the **right** side of the button should be soldered to `D5` (e.g. the 2nd pin up from the button on the **left** row of pins.). This mirrors the original wiring and wiring it in reverse could end up connecting GND to voltage and that's no beuno.
+
+Serial Pins remain available on `D6` (TX) and `D7` (RX) should you want to use them, The same pins could be repurposed for `i2c` if you would like to have that instead of serial, in `variant.h` you would just need to change:
+
+```c++
+// RX and TX pins
+#define PIN_SERIAL1_RX (6)
+#define PIN_SERIAL1_TX (7)
+```
+
+to
+
+```c++
+// RX and TX pins
+#define PIN_SERIAL1_RX (-1)
+#define PIN_SERIAL1_TX (-1)
+```
+
+and
+
+```c++
+#define PIN_WIRE_SDA (-1)
+#define PIN_WIRE_SCL (-1)
+// #define PIN_WIRE_SDA (6)
+// #define PIN_WIRE_SCL (7)
+```
+
+to
+
+```c++
+#define PIN_WIRE_SDA (6)
+#define PIN_WIRE_SCL (7)
+```
+
+If you wanted both serial and i2c you could even go so far as to use the pads for the PDM mic which is missing on the non-sense board (`P1.00` / `P0.16`)... or move up to the nRF52840 Plus which has even more pins available but hasn't been checked/confirmed if it follows the same pin mapping as the non-plus.
--- a/variants/diy/seeed-xiao-nrf52840-wio-sx1262/variant.cpp
+++ b/variants/diy/seeed-xiao-nrf52840-wio-sx1262/variant.cpp
@@ -0,0 +1,55 @@
+#include "variant.h"
+#include "nrf.h"
+#include "wiring_constants.h"
+#include "wiring_digital.h"
+
+const uint32_t g_ADigitalPinMap[] = {
+    // D0 .. D13
+    2,  // D0  is P0.02 (A0)
+    3,  // D1  is P0.03 (A1)
+    28, // D2  is P0.28 (A2)
+    29, // D3  is P0.29 (A3)
+    4,  // D4  is P0.04 (A4,SDA)
+    5,  // D5  is P0.05 (A5,SCL)
+    43, // D6  is P1.11 (TX)
+    44, // D7  is P1.12 (RX)
+    45, // D8  is P1.13 (SCK)
+    46, // D9  is P1.14 (MISO)
+    47, // D10 is P1.15 (MOSI)
+
+    // LEDs
+    26, // D11 is P0.26 (LED RED)
+    6,  // D12 is P0.06 (LED BLUE)
+    30, // D13 is P0.30 (LED GREEN)
+    14, // D14 is P0.14 (READ_BAT)
+
+    // LSM6DS3TR
+    40, // D15 is P1.08 (6D_PWR)
+    27, // D16 is P0.27 (6D_I2C_SCL)
+    7,  // D17 is P0.07 (6D_I2C_SDA)
+    11, // D18 is P0.11 (6D_INT1)
+
+    // MIC
+    42, // 17,//42,  // D19 is P1.10 (MIC_PWR)
+    32, // 26,//32,  // D20 is P1.00 (PDM_CLK)
+    16, // 25,//16,  // D21 is P0.16 (PDM_DATA)
+
+    // BQ25100
+    13, // D22 is P0.13 (HICHG)
+    17, // D23 is P0.17 (~CHG)
+
+    //
+    21, // D24 is P0.21 (QSPI_SCK)
+    25, // D25 is P0.25 (QSPI_CSN)
+    20, // D26 is P0.20 (QSPI_SIO_0 DI)
+    24, // D27 is P0.24 (QSPI_SIO_1 DO)
+    22, // D28 is P0.22 (QSPI_SIO_2 WP)
+    23, // D29 is P0.23 (QSPI_SIO_3 HOLD)
+
+    // NFC
+    9,  // D30 is P0.09 (NFC1)
+    10, // D31 is P0.10 (NFC2)
+
+    // VBAT
+    31, // D32 is P0.10 (VBAT)
+};
--- a/variants/diy/seeed-xiao-nrf52840-wio-sx1262/variant.h
+++ b/variants/diy/seeed-xiao-nrf52840-wio-sx1262/variant.h
@@ -0,0 +1,186 @@
+// basically xiao_ble with pins remapped for:
+// Seeed XIAO nRF52840 : https://www.seeedstudio.com/Seeed-XIAO-BLE-nRF52840-p-5201.html
+// Seeed Wio SX1626 : https://www.seeedstudio.com/Wio-SX1262-with-XIAO-ESP32S3-p-5982.html
+
+#ifndef _SEEED_XIAO_NRF52840_SENSE_H_
+#define _SEEED_XIAO_NRF52840_SENSE_H_
+
+/** Master clock frequency */
+#define VARIANT_MCK (64000000ul)
+
+#define USE_LFXO // Board uses 32khz crystal for LF
+
+/*----------------------------------------------------------------------------
+ *        Headers
+ *----------------------------------------------------------------------------*/
+
+#include "WVariant.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif // __cplusplus
+
+#define PINS_COUNT (33)
+#define NUM_DIGITAL_PINS (33)
+#define NUM_ANALOG_INPUTS (8) // A6 is used for battery, A7 is analog reference
+#define NUM_ANALOG_OUTPUTS (0)
+
+// LEDs
+// ----
+#define LED_RED 11
+#define LED_BLUE 12
+#define LED_GREEN 13
+
+#define PIN_LED1 LED_GREEN
+#define PIN_LED2 LED_BLUE
+#define PIN_LED3 LED_RED
+
+#define PIN_LED PIN_LED1
+#define LED_PWR (PINS_COUNT)
+
+#define LED_BUILTIN PIN_LED
+#define LED_STATE_ON 1 // State when LED is lit
+
+// XIAO Wio-SX1262 Shield User button
+#define PIN_BUTTON1 5
+#define BUTTON_NEED_PULLUP
+
+// Digital Pins
+// ------------
+#define D0 (0ul)
+#define D1 (1ul)
+#define D2 (2ul)
+#define D3 (3ul)
+#define D4 (4ul)
+#define D5 (5ul)
+#define D6 (6ul)
+#define D7 (7ul)
+#define D8 (8ul)
+#define D9 (9ul)
+#define D10 (10ul)
+
+// Analog Pins
+// -----------
+#define PIN_A0 (0)
+#define PIN_A1 (1)
+#define PIN_A2 (2)
+#define PIN_A3 (3)
+#define PIN_A4 (4)
+#define PIN_A5 (5)
+#define PIN_VBAT (32)
+#define VBAT_ENABLE (14)
+
+static const uint8_t A0 = PIN_A0;
+static const uint8_t A1 = PIN_A1;
+static const uint8_t A2 = PIN_A2;
+static const uint8_t A3 = PIN_A3;
+static const uint8_t A4 = PIN_A4;
+static const uint8_t A5 = PIN_A5;
+#define ADC_RESOLUTION 12
+
+// Other Pins
+// ----------
+#define PIN_NFC1 (30)
+#define PIN_NFC2 (31)
+
+// RX and TX pins
+#define PIN_SERIAL1_RX (-1)
+#define PIN_SERIAL1_TX (-1)
+// complains if not defined
+#define PIN_SERIAL2_RX (-1)
+#define PIN_SERIAL2_TX (-1)
+
+// 4 is used as RF_SW and 5 for USR button so...
+#define PIN_WIRE_SDA (6)
+#define PIN_WIRE_SCL (7)
+
+static const uint8_t SDA = PIN_WIRE_SDA;
+static const uint8_t SCL = PIN_WIRE_SCL;
+
+// SPI SX1262
+// ----------
+#define SPI_SX1262
+#ifdef SPI_SX1262
+#define SPI_INTERFACES_COUNT 1
+
+#define PIN_SPI_MISO (9)
+#define PIN_SPI_MOSI (10)
+#define PIN_SPI_SCK (8)
+
+static const uint8_t SS = D3;
+static const uint8_t MOSI = PIN_SPI_MOSI;
+static const uint8_t MISO = PIN_SPI_MISO;
+static const uint8_t SCK = PIN_SPI_SCK;
+
+// supported modules list
+#define USE_SX1262
+
+// common pinouts for SX126X modules
+#define SX126X_CS D3
+#define SX126X_DIO1 D0
+#define SX126X_BUSY D1
+#define SX126X_RESET D2
+
+// DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_RXEN 38
+#define SX126X_TXEN RADIOLIB_NC
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+#endif
+
+// Wire Interfaces
+// -------------------
+#define WIRE_INTERFACES_COUNT 1 // 2
+
+// Sense version has IMU and PDM Mic
+// #define XIAO_SENSE
+#ifndef XIAO_SENSE
+// 6 DoF IMU
+#define PIN_LSM6DS3TR_C_POWER (15)
+#define PIN_LSM6DS3TR_C_INT1 (18)
+// PDM Interfaces
+// ---------------
+#define PIN_PDM_PWR (19)
+#define PIN_PDM_CLK (20)
+#define PIN_PDM_DIN (21)
+#endif
+
+// QSPI Pins
+// ---------
+#define PIN_QSPI_SCK (24)
+#define PIN_QSPI_CS (25)
+#define PIN_QSPI_IO0 (26)
+#define PIN_QSPI_IO1 (27)
+#define PIN_QSPI_IO2 (28)
+#define PIN_QSPI_IO3 (29)
+
+// On-board QSPI Flash
+// -------------------
+#define EXTERNAL_FLASH_DEVICES P25Q16H
+#define EXTERNAL_FLASH_USE_QSPI
+
+// Battery
+// -------
+// P0_14 = 14  Reads battery voltage from divider on signal board.
+// PIN_VBAT is reading voltage divider on XIAO and is program pin 32 / or P0.31
+#define BAT_READ 14
+#define BATTERY_SENSE_RESOLUTION_BITS 10
+#define CHARGE_LED 23 // P0_17 = 17  D23   YELLOW CHARGE LED
+#define HICHG 22      // P0_13 = 13  D22   Charge-select pin for Lipo for 100 mA instead of default 50mA charge
+
+// The battery sense is hooked to pin A0 (5)
+#define BATTERY_PIN PIN_VBAT // PIN_A0
+
+// ratio of voltage divider = 3.0 (R17=1M, R18=510k)
+#define ADC_MULTIPLIER 3 // 3.0 + a bit for being optimistic
+
+#ifdef __cplusplus
+}
+#endif
+
+/*----------------------------------------------------------------------------
+ *        Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#endif
--- a/variants/dreamcatcher/platformio.ini
+++ b/variants/dreamcatcher/platformio.ini
@@ -1,6 +1,7 @@
 [env:dreamcatcher] ; 2301, latest revision
 extends = esp32s3_base
 board = esp32s3box
+board_build.partitions = default_16MB.csv
 board_level = extra

 build_flags = 
@@ -8,7 +9,7 @@ build_flags =
  -D PRIVATE_HW
  -D OTHERNET_DC_REV=2301
  -I variants/dreamcatcher
-  -DARDUINO_USB_CDC_ON_BOOT=1
+  -D ARDUINO_USB_CDC_ON_BOOT=1

 lib_deps = ${esp32s3_base.lib_deps}
  earlephilhower/ESP8266Audio@^1.9.9
@@ -17,6 +18,7 @@ lib_deps = ${esp32s3_base.lib_deps}
 [env:dreamcatcher-2206] 
 extends = esp32s3_base
 board = esp32s3box
+board_build.partitions = default_16MB.csv
 board_level = extra

 build_flags = 
@@ -24,4 +26,4 @@ build_flags =
  -D PRIVATE_HW
  -D OTHERNET_DC_REV=2206
  -I variants/dreamcatcher
-  -DARDUINO_USB_CDC_ON_BOOT=1
+  -D ARDUINO_USB_CDC_ON_BOOT=1
--- a/variants/esp32-s3-pico/platformio.ini
+++ b/variants/esp32-s3-pico/platformio.ini
@@ -4,6 +4,7 @@ board_level = extra
 extends = esp32s3_base
 upload_protocol = esptool
 board = esp32-s3-pico
+board_build.partitions = default_16MB.csv

 board_upload.use_1200bps_touch = yes
 board_upload.wait_for_upload_port = yes
@@ -21,5 +22,5 @@ build_flags = ${esp32s3_base.build_flags}
  -DEINK_HEIGHT=128

 lib_deps = ${esp32s3_base.lib_deps}
-  zinggjm/GxEPD2@^1.5.3
+  zinggjm/GxEPD2@^1.6.2
  adafruit/Adafruit NeoPixel @ ^1.12.0
--- a/variants/hackerboxes_esp32_io/platformio.ini
+++ b/variants/hackerboxes_esp32_io/platformio.ini
@@ -0,0 +1,12 @@
+[env:hackerboxes-esp32-io]
+extends = esp32_base
+board = esp32dev
+board_level = extra
+build_flags = 
+  ${esp32_base.build_flags}
+  -D PRIVATE_HW
+  -I variants/hackerboxes_esp32_io
+monitor_speed = 115200
+upload_protocol = esptool
+;upload_port = /dev/ttyUSB0
+upload_speed = 921600
--- a/variants/hackerboxes_esp32_io/variant.h
+++ b/variants/hackerboxes_esp32_io/variant.h
@@ -0,0 +1,30 @@
+#define BUTTON_PIN 0
+
+// HACKBOX LoRa IO Kit
+// Uses a ESP-32-WROOM and a RA-01SH (SX1262) LoRa Board
+
+#define LED_PIN 2      // LED
+#define LED_STATE_ON 1 // State when LED is lit
+
+#define HAS_SCREEN 0
+#define HAS_GPS 0
+#undef GPS_RX_PIN
+#undef GPS_TX_PIN
+
+#define USE_SX1262
+#define LORA_SCK 18
+#define LORA_MISO 19
+#define LORA_MOSI 23
+#define LORA_CS 5
+#define LORA_DIO0 RADIOLIB_NC
+#define LORA_RESET 27
+#define LORA_DIO1 33
+#define LORA_DIO2 RADIOLIB_NC
+#define LORA_BUSY 32
+
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_BUSY
+#define SX126X_RESET LORA_RESET
+#define SX126X_MAX_POWER 22 // Max power of the RA-01SH is 22db
--- a/variants/hackerboxes_esp32c3_oled/platformio.ini
+++ b/variants/hackerboxes_esp32c3_oled/platformio.ini
@@ -0,0 +1,14 @@
+[env:hackerboxes-esp32c3-oled]
+extends = esp32c3_base
+board = esp32-c3-devkitm-1
+board_level = extra
+build_flags = 
+  ${esp32_base.build_flags}
+  -D PRIVATE_HW
+  -D ARDUINO_USB_MODE=1
+  -D ARDUINO_USB_CDC_ON_BOOT=1
+  -I variants/hackerboxes_esp32c3_oled
+monitor_speed = 115200
+upload_protocol = esptool
+;upload_port = /dev/ttyUSB0
+upload_speed = 921600
--- a/variants/hackerboxes_esp32c3_oled/variant.h
+++ b/variants/hackerboxes_esp32c3_oled/variant.h
@@ -0,0 +1,36 @@
+#define BUTTON_PIN 9
+
+// Hackerboxes LoRa ESP32-C3 OLED Kit
+// Uses a ESP32-C3 OLED Board and a RA-01SH (SX1262) LoRa Board
+
+#define LED_PIN 8      // LED
+#define LED_STATE_ON 1 // State when LED is lit
+
+#define HAS_SCREEN 0
+#define HAS_GPS 0
+#undef GPS_RX_PIN
+#undef GPS_TX_PIN
+
+// #define USE_SSD1306_72_40
+// #define I2C_SDA 5 // I2C pins for this board
+// #define I2C_SCL 6 //
+// #define TFT_WIDTH 72
+// #define TFT_HEIGHT 40
+
+#define USE_SX1262
+#define LORA_SCK 4
+#define LORA_MISO 7
+#define LORA_MOSI 3
+#define LORA_CS 1
+#define LORA_DIO0 RADIOLIB_NC
+#define LORA_RESET 0
+#define LORA_DIO1 20
+#define LORA_DIO2 RADIOLIB_NC
+#define LORA_BUSY 10
+
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_BUSY
+#define SX126X_RESET LORA_RESET
+#define SX126X_MAX_POWER 22 // Max power of the RA-01SH is 22db
--- a/variants/heltec_capsule_sensor_v3/platformio.ini
+++ b/variants/heltec_capsule_sensor_v3/platformio.ini
@@ -2,7 +2,7 @@
 extends = esp32s3_base
 board = heltec_wifi_lora_32_V3
 board_check = true
-
+board_build.partitions = default_8MB.csv
 build_flags = 
  ${esp32s3_base.build_flags} -I variants/heltec_capsule_sensor_v3
  -D HELTEC_CAPSULE_SENSOR_V3
--- a/variants/heltec_mesh_node_t114/platformio.ini
+++ b/variants/heltec_mesh_node_t114/platformio.ini
@@ -14,4 +14,4 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/heltec_mesh_node
 lib_deps = 
  ${nrf52840_base.lib_deps}
  lewisxhe/PCF8563_Library@^1.0.1
-  https://github.com/meshtastic/st7789#bd33ea58ddfe4a5e4a66d53300ccbd38d66ac21f
+  https://github.com/meshtastic/st7789/archive/bd33ea58ddfe4a5e4a66d53300ccbd38d66ac21f.zip
--- a/variants/heltec_sensor_hub/platformio.ini
+++ b/variants/heltec_sensor_hub/platformio.ini
@@ -0,0 +1,11 @@
+[env:heltec_sensor_hub]
+extends = esp32s3_base
+board = heltec_wifi_lora_32_V3
+board_check = true
+
+build_flags = 
+  ${esp32s3_base.build_flags} -I variants/heltec_sensor_hub
+  -D HELTEC_SENSOR_HUB
+
+lib_deps = ${esp32s3_base.lib_deps}
+  adafruit/Adafruit NeoPixel @ ^1.12.0
--- a/variants/heltec_sensor_hub/variant.h
+++ b/variants/heltec_sensor_hub/variant.h
@@ -0,0 +1,46 @@
+#define EXT_PWR_DETECT 20
+
+#define BUTTON_PIN 17
+
+#define BATTERY_PIN 7 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
+#define ADC_CHANNEL ADC1_GPIO7_CHANNEL
+#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
+#define ADC_MULTIPLIER (4.9 * 1.045)
+#define ADC_CTRL 34 // active HIGH, powers the voltage divider. Only on 1.1
+#define ADC_CTRL_ENABLED HIGH
+
+#define HAS_NEOPIXEL                         // Enable the use of neopixels
+#define NEOPIXEL_COUNT 1                     // How many neopixels are connected
+#define NEOPIXEL_DATA 18                     // gpio pin used to send data to the neopixels
+#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use
+
+#define USE_SX1262
+#define LORA_DIO0 RADIOLIB_NC
+#define LORA_RESET 12
+#define LORA_DIO1 14 // SX1262 IRQ
+#define LORA_DIO2 13 // SX1262 BUSY
+
+#define LORA_SCK 9
+#define LORA_MISO 11
+#define LORA_MOSI 10
+#define LORA_CS 8
+
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_DIO2
+#define SX126X_RESET LORA_RESET
+
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+
+#define I2C_SDA 1
+#define I2C_SCL 2
+#define HAS_SCREEN 0
+#define SENSOR_POWER_CTRL_PIN 33
+#define SENSOR_POWER_ON 1
+
+#define PERIPHERAL_WARMUP_MS 100
+
+#define ESP32S3_WAKE_TYPE ESP_EXT1_WAKEUP_ANY_HIGH
+
+#define ENVIRONMENTAL_TELEMETRY_MODULE_ENABLE 1
--- a/variants/heltec_v3/platformio.ini
+++ b/variants/heltec_v3/platformio.ini
@@ -2,7 +2,7 @@
 extends = esp32s3_base
 board = heltec_wifi_lora_32_V3
 board_check = true
-# Temporary until espressif creates a release with this new target
+board_build.partitions = default_8MB.csv
 build_flags = 
  ${esp32s3_base.build_flags} -D HELTEC_V3 -I variants/heltec_v3
-  -DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
+  -D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
--- a/variants/heltec_vision_master_e213/nicheGraphics.h
+++ b/variants/heltec_vision_master_e213/nicheGraphics.h
@@ -0,0 +1,109 @@
+#pragma once
+
+#include "configuration.h"
+
+#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
+
+// InkHUD-specific components
+// ---------------------------
+#include "graphics/niche/InkHUD/InkHUD.h"
+
+// Applets
+#include "graphics/niche/InkHUD/Applets/User/AllMessage/AllMessageApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/DM/DMApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/Heard/HeardApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/Positions/PositionsApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/RecentsList/RecentsListApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/ThreadedMessage/ThreadedMessageApplet.h"
+
+// #include "graphics/niche/InkHUD/Applets/Examples/BasicExample/BasicExampleApplet.h"
+// #include "graphics/niche/InkHUD/Applets/Examples/NewMsgExample/NewMsgExampleApplet.h"
+
+// Shared NicheGraphics components
+// --------------------------------
+#include "graphics/niche/Drivers/EInk/LCMEN2R13EFC1.h"
+#include "graphics/niche/Inputs/TwoButton.h"
+
+#include "graphics/niche/Fonts/FreeSans6pt7b.h"
+#include "graphics/niche/Fonts/FreeSans6pt8bCyrillic.h"
+#include <Fonts/FreeSans9pt7b.h>
+
+void setupNicheGraphics()
+{
+    using namespace NicheGraphics;
+
+    // SPI
+    // -----------------------------
+
+    // Display is connected to HSPI
+    SPIClass *hspi = new SPIClass(HSPI);
+    hspi->begin(PIN_EINK_SCLK, -1, PIN_EINK_MOSI, PIN_EINK_CS);
+
+    // E-Ink Driver
+    // -----------------------------
+
+    // Use E-Ink driver
+    Drivers::EInk *driver = new Drivers::LCMEN213EFC1;
+    driver->begin(hspi, PIN_EINK_DC, PIN_EINK_CS, PIN_EINK_BUSY, PIN_EINK_RES);
+
+    // InkHUD
+    // ----------------------------
+
+    InkHUD::InkHUD *inkhud = InkHUD::InkHUD::getInstance();
+
+    // Set the driver
+    inkhud->setDriver(driver);
+
+    // Set how many FAST updates per FULL update
+    // Set how unhealthy additional FAST updates beyond this number are
+    inkhud->setDisplayResilience(10, 1.5);
+
+    // Prepare fonts
+    InkHUD::Applet::fontLarge = InkHUD::AppletFont(FreeSans9pt7b);
+    InkHUD::Applet::fontSmall = InkHUD::AppletFont(FreeSans6pt7b);
+    /*
+    // Font localization demo: Cyrillic
+    InkHUD::Applet::fontSmall = InkHUD::AppletFont(FreeSans6pt8bCyrillic);
+    InkHUD::Applet::fontSmall.addSubstitutionsWin1251();
+    */
+
+    // Customize default settings
+    inkhud->persistence->settings.userTiles.maxCount = 2; // How many tiles can the display handle?
+    inkhud->persistence->settings.rotation = 3;           // 270 degrees clockwise
+    inkhud->persistence->settings.userTiles.count = 1;    // One tile only by default, keep things simple for new users
+    inkhud->persistence->settings.optionalMenuItems.nextTile = false; // Behavior handled by aux button instead
+
+    // Pick applets
+    inkhud->addApplet("All Messages", new InkHUD::AllMessageApplet, true, true); // Activated, autoshown
+    inkhud->addApplet("DMs", new InkHUD::DMApplet);                              // Inactive
+    inkhud->addApplet("Channel 0", new InkHUD::ThreadedMessageApplet(0));        // Inactive
+    inkhud->addApplet("Channel 1", new InkHUD::ThreadedMessageApplet(1));        // Inactive
+    inkhud->addApplet("Positions", new InkHUD::PositionsApplet, true);           // Activated
+    inkhud->addApplet("Recents List", new InkHUD::RecentsListApplet);            // Inactive
+    inkhud->addApplet("Heard", new InkHUD::HeardApplet, true, false, 0);         // Activated, not autoshown, default on tile 0
+    // inkhud->addApplet("Basic", new InkHUD::BasicExampleApplet);
+    // inkhud->addApplet("NewMsg", new InkHUD::NewMsgExampleApplet);
+
+    // Start running InkHUD
+    inkhud->begin();
+
+    // Buttons
+    // --------------------------
+
+    Inputs::TwoButton *buttons = Inputs::TwoButton::getInstance(); // Shared NicheGraphics component
+    constexpr uint8_t MAIN_BUTTON = 0;
+    constexpr uint8_t AUX_BUTTON = 1;
+
+    // Setup the main user button
+    buttons->setWiring(MAIN_BUTTON, Inputs::TwoButton::getUserButtonPin());
+    buttons->setHandlerShortPress(MAIN_BUTTON, []() { InkHUD::InkHUD::getInstance()->shortpress(); });
+    buttons->setHandlerLongPress(MAIN_BUTTON, []() { InkHUD::InkHUD::getInstance()->longpress(); });
+
+    // Setup the aux button
+    // Bonus feature of VME213
+    buttons->setWiring(AUX_BUTTON, BUTTON_PIN_SECONDARY);
+    buttons->setHandlerShortPress(AUX_BUTTON, []() { InkHUD::InkHUD::getInstance()->nextTile(); });
+    buttons->start();
+}
+
+#endif
--- a/variants/heltec_vision_master_e213/platformio.ini
+++ b/variants/heltec_vision_master_e213/platformio.ini
@@ -1,23 +1,39 @@
 [env:heltec-vision-master-e213]
 extends = esp32s3_base
 board = heltec_vision_master_e213
+board_build.partitions = default_8MB.csv
 build_flags = 
-  ${esp32s3_base.build_flags} 
+  ${esp32s3_base.build_flags}
  -Ivariants/heltec_vision_master_e213 
  -DHELTEC_VISION_MASTER_E213
+  -DUSE_EINK
  -DEINK_DISPLAY_MODEL=GxEPD2_213_FC1
  -DEINK_WIDTH=250
  -DEINK_HEIGHT=122
  -DUSE_EINK_DYNAMICDISPLAY            ; Enable Dynamic EInk
  -DEINK_LIMIT_FASTREFRESH=10          ; How many consecutive fast-refreshes are permitted
-  -DEINK_LIMIT_RATE_BACKGROUND_SEC=30  ; Minimum interval between BACKGROUND updates
-  -DEINK_LIMIT_RATE_RESPONSIVE_SEC=1   ; Minimum interval between RESPONSIVE updates
-;   -D EINK_LIMIT_GHOSTING_PX=2000      ; (Optional) How much image ghosting is tolerated
  -DEINK_BACKGROUND_USES_FAST          ; (Optional) Use FAST refresh for both BACKGROUND and RESPONSIVE, until a limit is reached.
  -DEINK_HASQUIRK_GHOSTING             ; Display model is identified as "prone to ghosting"
-  -DEINK_HASQUIRK_WEAKFASTREFRESH      ; Pixels set with fast-refresh are easy to clear, disrupted by sunlight
 lib_deps =
  ${esp32s3_base.lib_deps}
-  https://github.com/meshtastic/GxEPD2#b202ebfec6a4821e098cf7a625ba0f6f2400292d
+  https://github.com/meshtastic/GxEPD2/archive/b202ebfec6a4821e098cf7a625ba0f6f2400292d.zip
  lewisxhe/PCF8563_Library@^1.0.1
-upload_speed = 115200
+upload_speed = 115200
+
+[env:heltec-vision-master-e213-inkhud]
+extends = esp32s3_base, inkhud
+board = heltec_vision_master_e213
+board_build.partitions = default_8MB.csv
+build_src_filter =
+  ${esp32_base.build_src_filter}
+  ${inkhud.build_src_filter}
+build_flags =  
+  ${esp32s3_base.build_flags}
+  ${inkhud.build_flags}
+  -I variants/heltec_vision_master_e213
+  -D HELTEC_VISION_MASTER_E213
+  -D MAX_THREADS=40 ; Required if used with WiFi
+lib_deps =
+  ${inkhud.lib_deps} ; InkHUD libs first, so we get GFXRoot instead of AdafruitGFX
+  ${esp32s3_base.lib_deps}
+upload_speed = 921600
--- a/variants/heltec_vision_master_e213/variant.h
+++ b/variants/heltec_vision_master_e213/variant.h
@@ -8,7 +8,6 @@
 #define I2C_SCL SCL

 // Display (E-Ink)
-#define USE_EINK
 #define PIN_EINK_CS 5
 #define PIN_EINK_BUSY 1
 #define PIN_EINK_DC 2
--- a/variants/heltec_vision_master_e290/nicheGraphics.h
+++ b/variants/heltec_vision_master_e290/nicheGraphics.h
@@ -0,0 +1,128 @@
+/*
+
+Most of the Meshtastic firmware uses preprocessor macros throughout the code to support different hardware variants.
+NicheGraphics attempts a different approach:
+
+Per-device config takes place in this setupNicheGraphics() method
+(And a small amount in platformio.ini)
+
+This file sets up InkHUD for Heltec VM-E290.
+Different NicheGraphics UIs and different hardware variants will each have their own setup procedure.
+
+*/
+
+#pragma once
+
+#include "configuration.h"
+
+#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
+
+// InkHUD-specific components
+// ---------------------------
+#include "graphics/niche/InkHUD/InkHUD.h"
+
+// Applets
+#include "graphics/niche/InkHUD/Applets/User/AllMessage/AllMessageApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/DM/DMApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/Heard/HeardApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/Positions/PositionsApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/RecentsList/RecentsListApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/ThreadedMessage/ThreadedMessageApplet.h"
+
+// #include "graphics/niche/InkHUD/Applets/Examples/BasicExample/BasicExampleApplet.h"
+// #include "graphics/niche/InkHUD/Applets/Examples/NewMsgExample/NewMsgExampleApplet.h"
+
+// Shared NicheGraphics components
+// --------------------------------
+#include "graphics/niche/Drivers/EInk/DEPG0290BNS800.h"
+#include "graphics/niche/Inputs/TwoButton.h"
+
+#include "graphics/niche/Fonts/FreeSans6pt7b.h"
+#include "graphics/niche/Fonts/FreeSans6pt8bCyrillic.h"
+#include <Fonts/FreeSans9pt7b.h>
+
+void setupNicheGraphics()
+{
+    using namespace NicheGraphics;
+
+    // SPI
+    // -----------------------------
+
+    // Display is connected to HSPI
+    SPIClass *hspi = new SPIClass(HSPI);
+    hspi->begin(PIN_EINK_SCLK, -1, PIN_EINK_MOSI, PIN_EINK_CS);
+
+    // E-Ink Driver
+    // -----------------------------
+
+    // Use E-Ink driver
+    Drivers::EInk *driver = new Drivers::DEPG0290BNS800;
+    driver->begin(hspi, PIN_EINK_DC, PIN_EINK_CS, PIN_EINK_BUSY);
+
+    // InkHUD
+    // ----------------------------
+
+    InkHUD::InkHUD *inkhud = InkHUD::InkHUD::getInstance();
+
+    // Set the driver
+    inkhud->setDriver(driver);
+
+    // Set how many FAST updates per FULL update
+    // Set how unhealthy additional FAST updates beyond this number are
+    inkhud->setDisplayResilience(7, 1.5);
+
+    // Prepare fonts
+    InkHUD::Applet::fontLarge = InkHUD::AppletFont(FreeSans9pt7b);
+    InkHUD::Applet::fontSmall = InkHUD::AppletFont(FreeSans6pt7b);
+    /*
+    // Font localization demo: Cyrillic
+    InkHUD::Applet::fontSmall = InkHUD::AppletFont(FreeSans6pt8bCyrillic);
+    InkHUD::Applet::fontSmall.addSubstitutionsWin1251();
+    */
+
+    // Customize default settings
+    inkhud->persistence->settings.userTiles.maxCount = 2; // How many tiles can the display handle?
+    inkhud->persistence->settings.rotation = 1;           // 90 degrees clockwise
+    inkhud->persistence->settings.userTiles.count = 1;    // One tile only by default, keep things simple for new users
+    inkhud->persistence->settings.optionalMenuItems.nextTile = false; // Behavior handled by aux button instead
+
+    // Pick applets
+
+    // Order of applets determines priority of "auto-show" feature.
+    // Optional arguments for default state:
+    //   - is activated?
+    //   - is autoshown?
+    //   - is foreground on a specific tile (index)?
+
+    inkhud->addApplet("All Messages", new InkHUD::AllMessageApplet, true, true); // Activated, autoshown
+    inkhud->addApplet("DMs", new InkHUD::DMApplet);                              // Inactive
+    inkhud->addApplet("Channel 0", new InkHUD::ThreadedMessageApplet(0));        // Inactive
+    inkhud->addApplet("Channel 1", new InkHUD::ThreadedMessageApplet(1));        // Inactive
+    inkhud->addApplet("Positions", new InkHUD::PositionsApplet, true);           // Activated
+    inkhud->addApplet("Recents List", new InkHUD::RecentsListApplet);            // Inactive
+    inkhud->addApplet("Heard", new InkHUD::HeardApplet, true, false, 0);         // Activated, not autoshown, default on tile 0
+    // inkhud->addApplet("Basic", new InkHUD::BasicExampleApplet);
+    // inkhud->addApplet("NewMsg", new InkHUD::NewMsgExampleApplet);
+
+    // Start running InkHUD
+    inkhud->begin();
+
+    // Buttons
+    // --------------------------
+
+    Inputs::TwoButton *buttons = Inputs::TwoButton::getInstance(); // A shared NicheGraphics component
+
+    // Setup the main user button (0)
+    buttons->setWiring(0, Inputs::TwoButton::getUserButtonPin());
+    buttons->setHandlerShortPress(0, []() { InkHUD::InkHUD::getInstance()->shortpress(); });
+    buttons->setHandlerLongPress(0, []() { InkHUD::InkHUD::getInstance()->longpress(); });
+
+    // Setup the aux button (1)
+    // Bonus feature of VME290
+    buttons->setWiring(1, BUTTON_PIN_SECONDARY);
+    buttons->setHandlerShortPress(1, []() { InkHUD::InkHUD::getInstance()->nextTile(); });
+
+    buttons->start();
+}
+
+#endif
--- a/variants/heltec_vision_master_e290/platformio.ini
+++ b/variants/heltec_vision_master_e290/platformio.ini
@@ -1,25 +1,43 @@
+; Using the original screen class
 [env:heltec-vision-master-e290]
 extends = esp32s3_base
 board = heltec_vision_master_e290
+board_build.partitions = default_8MB.csv
 build_flags = 
  ${esp32s3_base.build_flags} 
  -I variants/heltec_vision_master_e290
+  -D DISPLAY_FLIP_SCREEN ; Orient so the LoRa antenna faces up
  -D HELTEC_VISION_MASTER_E290
  -D BUTTON_CLICK_MS=200
  -D EINK_DISPLAY_MODEL=GxEPD2_290_BN8
  -D EINK_WIDTH=296
  -D EINK_HEIGHT=128
+  -D USE_EINK
  -D USE_EINK_DYNAMICDISPLAY            ; Enable Dynamic EInk
  -D EINK_LIMIT_FASTREFRESH=10          ; How many consecutive fast-refreshes are permitted
-  -D EINK_LIMIT_RATE_BACKGROUND_SEC=30  ; Minimum interval between BACKGROUND updates
-  -D EINK_LIMIT_RATE_RESPONSIVE_SEC=1   ; Minimum interval between RESPONSIVE updates
  -D EINK_HASQUIRK_GHOSTING             ; Display model is identified as "prone to ghosting"
-  -D EINK_HASQUIRK_WEAKFASTREFRESH      ; Pixels set with fast-refresh are easy to clear, disrupted by sunlight
-;  -D EINK_LIMIT_GHOSTING_PX=2000        ; How much image ghosting is tolerated
-;  -D EINK_BACKGROUND_USES_FAST          ; (If enabled) don't redraw RESPONSIVE frames at next BACKGROUND update
+

 lib_deps =
  ${esp32s3_base.lib_deps}
-  https://github.com/meshtastic/GxEPD2#448c8538129fde3d02a7cb5e6fc81971ad92547f
+  https://github.com/meshtastic/GxEPD2/archive/448c8538129fde3d02a7cb5e6fc81971ad92547f.zip
  lewisxhe/PCF8563_Library@^1.0.1
-upload_speed = 115200
+upload_speed = 115200
+
+[env:heltec-vision-master-e290-inkhud]
+extends = esp32s3_base, inkhud
+board = heltec_vision_master_e290
+board_build.partitions = default_8MB.csv
+build_src_filter = 
+  ${esp32_base.build_src_filter} 
+  ${inkhud.build_src_filter}
+build_flags = 
+  ${esp32s3_base.build_flags}
+  ${inkhud.build_flags}
+  -I variants/heltec_vision_master_e290
+  -D HELTEC_VISION_MASTER_E290
+  -D MAX_THREADS=40 ; Required if used with WiFi
+lib_deps =
+  ${inkhud.lib_deps} ; InkHUD libs first, so we get GFXRoot instead of AdafruitGFX
+  ${esp32s3_base.lib_deps}
+upload_speed = 921600
--- a/variants/heltec_vision_master_e290/variant.h
+++ b/variants/heltec_vision_master_e290/variant.h
@@ -8,7 +8,6 @@
 #define I2C_SCL SCL

 // Display (E-Ink)
-#define USE_EINK
 #define PIN_EINK_CS 3
 #define PIN_EINK_BUSY 6
 #define PIN_EINK_DC 4
--- a/variants/heltec_vision_master_t190/platformio.ini
+++ b/variants/heltec_vision_master_t190/platformio.ini
@@ -1,13 +1,13 @@
 [env:heltec-vision-master-t190]
 extends = esp32s3_base
 board = heltec_vision_master_t190
+board_build.partitions = default_8MB.csv
 build_flags = 
  ${esp32s3_base.build_flags} 
  -Ivariants/heltec_vision_master_t190
-  -DHELTEC_VISION_MASTER_T190  
- ; -D PRIVATE_HW 
+  -DHELTEC_VISION_MASTER_T190
 lib_deps =
  ${esp32s3_base.lib_deps}
  lewisxhe/PCF8563_Library@^1.0.1
-  https://github.com/meshtastic/st7789#bd33ea58ddfe4a5e4a66d53300ccbd38d66ac21f
+  https://github.com/meshtastic/st7789/archive/bd33ea58ddfe4a5e4a66d53300ccbd38d66ac21f.zip
 upload_speed = 921600
--- a/variants/heltec_wireless_paper/nicheGraphics.h
+++ b/variants/heltec_wireless_paper/nicheGraphics.h
@@ -0,0 +1,105 @@
+#pragma once
+
+#include "configuration.h"
+
+#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
+
+// InkHUD-specific components
+// ---------------------------
+#include "graphics/niche/InkHUD/InkHUD.h"
+
+// Applets
+#include "graphics/niche/InkHUD/Applets/User/AllMessage/AllMessageApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/DM/DMApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/Heard/HeardApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/Positions/PositionsApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/RecentsList/RecentsListApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/ThreadedMessage/ThreadedMessageApplet.h"
+
+// #include "graphics/niche/InkHUD/Applets/Examples/BasicExample/BasicExampleApplet.h"
+// #include "graphics/niche/InkHUD/Applets/Examples/NewMsgExample/NewMsgExampleApplet.h"
+
+// Shared NicheGraphics components
+// --------------------------------
+#include "graphics/niche/Drivers/EInk/LCMEN2R13EFC1.h"
+#include "graphics/niche/Inputs/TwoButton.h"
+
+#include "graphics/niche/Fonts/FreeSans6pt7b.h"
+#include "graphics/niche/Fonts/FreeSans6pt8bCyrillic.h"
+#include <Fonts/FreeSans9pt7b.h>
+
+void setupNicheGraphics()
+{
+    using namespace NicheGraphics;
+
+    // SPI
+    // -----------------------------
+
+    // Display is connected to HSPI
+    SPIClass *hspi = new SPIClass(HSPI);
+    hspi->begin(PIN_EINK_SCLK, -1, PIN_EINK_MOSI, PIN_EINK_CS);
+
+    // E-Ink Driver
+    // -----------------------------
+
+    // Use E-Ink driver
+    Drivers::EInk *driver = new Drivers::LCMEN213EFC1;
+    driver->begin(hspi, PIN_EINK_DC, PIN_EINK_CS, PIN_EINK_BUSY, PIN_EINK_RES);
+
+    // InkHUD
+    // ----------------------------
+
+    InkHUD::InkHUD *inkhud = InkHUD::InkHUD::getInstance();
+
+    // Set the driver
+    inkhud->setDriver(driver);
+
+    // Set how many FAST updates per FULL update
+    // Set how unhealthy additional FAST updates beyond this number are
+    inkhud->setDisplayResilience(10, 1.5);
+
+    // Prepare fonts
+    InkHUD::Applet::fontLarge = InkHUD::AppletFont(FreeSans9pt7b);
+    InkHUD::Applet::fontSmall = InkHUD::AppletFont(FreeSans6pt7b);
+    /*
+    // Font localization demo: Cyrillic
+    InkHUD::Applet::fontSmall = InkHUD::AppletFont(FreeSans6pt8bCyrillic);
+    InkHUD::Applet::fontSmall.addSubstitutionsWin1251();
+    */
+
+    // Customize default settings
+    inkhud->persistence->settings.userTiles.maxCount = 2; // How many tiles can the display handle?
+    inkhud->persistence->settings.rotation = 3;           // 270 degrees clockwise
+    inkhud->persistence->settings.userTiles.count = 1;    // One tile only by default, keep things simple for new users
+
+    // Pick applets
+    inkhud->addApplet("All Messages", new InkHUD::AllMessageApplet, true, true); // Activated, autoshown
+    inkhud->addApplet("DMs", new InkHUD::DMApplet);                              // Inactive
+    inkhud->addApplet("Channel 0", new InkHUD::ThreadedMessageApplet(0));        // Inactive
+    inkhud->addApplet("Channel 1", new InkHUD::ThreadedMessageApplet(1));        // Inactive
+    inkhud->addApplet("Positions", new InkHUD::PositionsApplet, true);           // Activated
+    inkhud->addApplet("Recents List", new InkHUD::RecentsListApplet);            // Inactive
+    inkhud->addApplet("Heard", new InkHUD::HeardApplet, true, false, 0);         // Activated, not autoshown, default on tile 0
+    // inkhud->addApplet("Basic", new InkHUD::BasicExampleApplet);
+    // inkhud->addApplet("NewMsg", new InkHUD::NewMsgExampleApplet);
+
+    // Start running InkHUD
+    inkhud->begin();
+
+    // Buttons
+    // --------------------------
+
+    Inputs::TwoButton *buttons = Inputs::TwoButton::getInstance(); // Shared NicheGraphics component
+    constexpr uint8_t MAIN_BUTTON = 0;
+
+    // Setup the main user button
+    buttons->setWiring(MAIN_BUTTON, Inputs::TwoButton::getUserButtonPin());
+    buttons->setHandlerShortPress(MAIN_BUTTON, []() { InkHUD::InkHUD::getInstance()->shortpress(); });
+    buttons->setHandlerLongPress(MAIN_BUTTON, []() { InkHUD::InkHUD::getInstance()->longpress(); });
+
+    // No aux button on this board
+
+    buttons->start();
+}
+
+#endif
--- a/variants/heltec_wireless_paper/platformio.ini
+++ b/variants/heltec_wireless_paper/platformio.ini
@@ -1,6 +1,8 @@
+; Using the original screen class
 [env:heltec-wireless-paper]
 extends = esp32s3_base
 board = heltec_wifi_lora_32_V3
+board_build.partitions = default_8MB.csv
 build_flags = 
  ${esp32s3_base.build_flags} 
  -I variants/heltec_wireless_paper
@@ -8,16 +10,31 @@ build_flags =
  -D EINK_DISPLAY_MODEL=GxEPD2_213_FC1
  -D EINK_WIDTH=250
  -D EINK_HEIGHT=122
+  -D USE_EINK
  -D USE_EINK_DYNAMICDISPLAY            ; Enable Dynamic EInk
  -D EINK_LIMIT_FASTREFRESH=10          ; How many consecutive fast-refreshes are permitted
-  -D EINK_LIMIT_RATE_BACKGROUND_SEC=30  ; Minimum interval between BACKGROUND updates
-  -D EINK_LIMIT_RATE_RESPONSIVE_SEC=1   ; Minimum interval between RESPONSIVE updates
-;   -D EINK_LIMIT_GHOSTING_PX=2000      ; (Optional) How much image ghosting is tolerated
  -D EINK_BACKGROUND_USES_FAST          ; (Optional) Use FAST refresh for both BACKGROUND and RESPONSIVE, until a limit is reached.
  -D EINK_HASQUIRK_GHOSTING             ; Display model is identified as "prone to ghosting"
-  -D EINK_HASQUIRK_WEAKFASTREFRESH      ; Pixels set with fast-refresh are easy to clear, disrupted by sunlight
 lib_deps =
  ${esp32s3_base.lib_deps}
-  https://github.com/meshtastic/GxEPD2#b202ebfec6a4821e098cf7a625ba0f6f2400292d
+  https://github.com/meshtastic/GxEPD2/archive/b202ebfec6a4821e098cf7a625ba0f6f2400292d.zip
  lewisxhe/PCF8563_Library@^1.0.1
-upload_speed = 115200
+upload_speed = 115200
+
+[env:heltec-wireless-paper-inkhud]
+extends = esp32s3_base, inkhud
+board = heltec_wifi_lora_32_V3
+board_build.partitions = default_8MB.csv
+build_src_filter =
+  ${esp32_base.build_src_filter} 
+  ${inkhud.build_src_filter}
+build_flags =
+  ${esp32s3_base.build_flags}
+  ${inkhud.build_flags}
+  -I variants/heltec_wireless_paper
+  -D HELTEC_WIRELESS_PAPER
+  -D MAX_THREADS=40 ; Required if used with WiFi
+lib_deps =
+  ${inkhud.lib_deps} ; InkHUD libs first, so we get GFXRoot instead of AdafruitGFX
+  ${esp32s3_base.lib_deps}
+upload_speed = 921600
--- a/variants/heltec_wireless_paper/variant.h
+++ b/variants/heltec_wireless_paper/variant.h
@@ -6,7 +6,6 @@
 #define I2C_SCL SCL

 // Display (E-Ink)
-#define USE_EINK
 #define PIN_EINK_CS 4
 #define PIN_EINK_BUSY 7
 #define PIN_EINK_DC 5
--- a/variants/heltec_wireless_paper_v1/platformio.ini
+++ b/variants/heltec_wireless_paper_v1/platformio.ini
@@ -2,6 +2,7 @@
 extends = esp32s3_base
 board_level = extra
 board = heltec_wifi_lora_32_V3
+board_build.partitions = default_8MB.csv
 build_flags = 
  ${esp32s3_base.build_flags} 
  -I variants/heltec_wireless_paper_v1 
@@ -11,13 +12,9 @@ build_flags =
  -D EINK_HEIGHT=122
  -D USE_EINK_DYNAMICDISPLAY            ; Enable Dynamic EInk
  -D EINK_LIMIT_FASTREFRESH=5           ; How many consecutive fast-refreshes are permitted
-  -D EINK_LIMIT_RATE_BACKGROUND_SEC=30  ; Minimum interval between BACKGROUND updates
-  -D EINK_LIMIT_RATE_RESPONSIVE_SEC=1   ; Minimum interval between RESPONSIVE updates
  -D EINK_LIMIT_GHOSTING_PX=2000        ; (Optional) How much image ghosting is tolerated
-  ;-D EINK_BACKGROUND_USES_FAST         ; (Optional) Use FAST refresh for both BACKGROUND and RESPONSIVE, until a limit is reached.
-  -D EINK_HASQUIRK_VICIOUSFASTREFRESH   ; Identify that pixels drawn by fast-refresh are harder to clear
 lib_deps =
  ${esp32s3_base.lib_deps}
-  https://github.com/meshtastic/GxEPD2#55f618961db45a23eff0233546430f1e5a80f63a
+  https://github.com/meshtastic/GxEPD2/archive/55f618961db45a23eff0233546430f1e5a80f63a.zip
  lewisxhe/PCF8563_Library@^1.0.1
 upload_speed = 115200
--- a/variants/heltec_wireless_tracker/platformio.ini
+++ b/variants/heltec_wireless_tracker/platformio.ini
@@ -1,6 +1,7 @@
 [env:heltec-wireless-tracker]
 extends = esp32s3_base
 board = heltec_wireless_tracker
+board_build.partitions = default_8MB.csv
 upload_protocol = esptool

 build_flags = 
@@ -11,4 +12,4 @@ build_flags =

 lib_deps =
  ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@^1.1.8
+  lovyan03/LovyanGFX@^1.2.0
--- a/variants/heltec_wireless_tracker_V1_0/platformio.ini
+++ b/variants/heltec_wireless_tracker_V1_0/platformio.ini
@@ -2,6 +2,7 @@
 extends = esp32s3_base
 board_level = extra
 board = heltec_wireless_tracker
+board_build.partitions = default_8MB.csv
 upload_protocol = esptool
 build_flags = 
  ${esp32s3_base.build_flags} -I variants/heltec_wireless_tracker_V1_0
@@ -10,4 +11,4 @@ build_flags =
  ;-D DEBUG_DISABLED ; uncomment this line to disable DEBUG output
 lib_deps =
  ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@^1.1.8
+  lovyan03/LovyanGFX@^1.2.0
--- a/variants/heltec_wsl_v2.1/platformio.ini
+++ b/variants/heltec_wsl_v2.1/platformio.ini
@@ -0,0 +1,7 @@
+[env:heltec-wsl-v2_1]
+extends = esp32_base
+board = heltec_wireless_stick_lite
+board_level = extra
+build_flags =
+  ${esp32_base.build_flags} -D PRIVATE_HW -I variants/heltec_wsl_v2.1
+  -DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
--- a/variants/heltec_wsl_v2.1/variant.h
+++ b/variants/heltec_wsl_v2.1/variant.h
@@ -0,0 +1,29 @@
+#define I2C_SCL SCL
+#define I2C_SDA SDA
+
+#define LED_PIN LED
+
+// active low, powers the Battery reader, but no lora antenna boost (?)
+// #define VEXT_ENABLE Vext
+// #define VEXT_ON_VALUE LOW
+
+#define BUTTON_PIN 0
+
+#define ADC_CTRL 21
+#define ADC_CTRL_ENABLED LOW
+#define BATTERY_PIN 37 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
+#define ADC_CHANNEL ADC1_CHANNEL_1
+// ratio of voltage divider = 3.20 (R1=100k, R2=220k)
+#define ADC_MULTIPLIER 3.2
+
+#define USE_RF95 // RFM95/SX127x
+
+#define LORA_DIO0 26
+#define LORA_RESET 14
+#define LORA_DIO1 35
+#define LORA_DIO2 34
+
+#define LORA_SCK 5
+#define LORA_MISO 19
+#define LORA_MOSI 27
+#define LORA_CS 18
--- a/variants/heltec_wsl_v3/platformio.ini
+++ b/variants/heltec_wsl_v3/platformio.ini
@@ -1,7 +1,8 @@
 [env:heltec-wsl-v3] 
 extends = esp32s3_base
 board = heltec_wifi_lora_32_V3
+board_build.partitions = default_8MB.csv
 # Temporary until espressif creates a release with this new target
 build_flags = 
  ${esp32s3_base.build_flags} -D HELTEC_WSL_V3 -I variants/heltec_wsl_v3
-  -DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
+  -D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
--- a/variants/icarus/platformio.ini
+++ b/variants/icarus/platformio.ini
@@ -4,9 +4,10 @@ board = icarus
 board_level = extra
 board_check = true
 board_build.mcu = esp32s3
+board_build.partitions = default_8MB.csv
 upload_protocol = esptool
 upload_speed = 921600
-platform_packages = framework-arduinoespressif32@https://github.com/PowerFeather/powerfeather-meshtastic-arduino-lib/releases/download/2.0.16a/esp32-2.0.16.zip
+platform_packages = platformio/framework-arduinoespressif32@https://github.com/PowerFeather/powerfeather-meshtastic-arduino-lib/releases/download/2.0.16a/esp32-2.0.16.zip
 lib_deps =
  ${esp32s3_base.lib_deps}
 build_unflags =
@@ -15,5 +16,4 @@ build_unflags =
 build_flags = 
  ${esp32s3_base.build_flags} -D PRIVATE_HW -I variants/icarus
  -DBOARD_HAS_PSRAM 
-
  -DARDUINO_USB_MODE=0
--- a/variants/m5stack_core/platformio.ini
+++ b/variants/m5stack_core/platformio.ini
@@ -25,4 +25,4 @@ lib_ignore =
  m5stack-core
 lib_deps = 
  ${esp32_base.lib_deps}
-  lovyan03/LovyanGFX@^1.1.8
+  lovyan03/LovyanGFX@^1.2.0
--- a/variants/m5stack_coreink/platformio.ini
+++ b/variants/m5stack_coreink/platformio.ini
@@ -17,11 +17,11 @@ build_flags =
  -DM5STACK
 lib_deps = 
  ${esp32_base.lib_deps}
-  zinggjm/GxEPD2@^1.5.3
+  zinggjm/GxEPD2@^1.6.2
  lewisxhe/PCF8563_Library@^1.0.1
 lib_ignore =
  m5stack-coreink
 monitor_filters = esp32_exception_decoder
 board_build.f_cpu = 240000000L
 upload_protocol = esptool
-upload_port = /dev/ttyACM0
+upload_port = /dev/ttyACM0
--- a/variants/m5stack_cores3/platformio.ini
+++ b/variants/m5stack_cores3/platformio.ini
@@ -3,6 +3,7 @@
 extends = esp32s3_base
 board = m5stack-cores3
 board_check = true
+board_build.partitions = default_16MB.csv
 upload_protocol = esptool

 build_flags = ${esp32_base.build_flags} 
--- a/variants/mesh-tab/platformio.ini
+++ b/variants/mesh-tab/platformio.ini
@@ -28,7 +28,6 @@ build_flags = ${esp32s3_base.build_flags}
  -D USE_LOG_DEBUG
  -D LOG_DEBUG_INC=\"DebugConfiguration.h\"
  -D RADIOLIB_SPI_PARANOID=0
-  -D MAX_NUM_NODES=250
  -D MAX_THREADS=40
  -D HAS_SCREEN=0
  -D HAS_TFT=1
@@ -36,6 +35,7 @@ build_flags = ${esp32s3_base.build_flags}
  -D RAM_SIZE=1024
  -D LGFX_DRIVER_TEMPLATE
  -D LGFX_DRIVER=LGFX_GENERIC
+  -D GFX_DRIVER_INC=\"graphics/LGFX/LGFX_GENERIC.h\"
  -D LGFX_PIN_SCK=12
  -D LGFX_PIN_MOSI=13
  -D LGFX_PIN_MISO=11
@@ -46,28 +46,17 @@ build_flags = ${esp32s3_base.build_flags}
  -D LGFX_TOUCH_INT=41
  -D VIEW_320x240
  -D USE_PACKET_API
-  -I lib/device-ui/generated/ui_320x240
  -I variants/mesh-tab
 build_src_filter = ${esp32_base.build_src_filter}
-  +<../lib/device-ui/generated/ui_320x240>
-  +<../lib/device-ui/resources>
-  +<../lib/device-ui/locale>
-  +<../lib/device-ui/source>
-lib_deps = ${esp32_base.lib_deps}
-  lovyan03/LovyanGFX@^1.1.16
+lib_deps =
+  ${esp32_base.lib_deps}
+  ${device-ui_base.lib_deps}
+  lovyan03/LovyanGFX@^1.2.0

-; 3.2" TN TFT ST7789 / XPT2046: https://vi.aliexpress.com/item/1005005933490544.html
-[env:mesh-tab-3-2-TN-resistive]
+[mesh_tab_xpt2046]
 extends = mesh_tab_base
 build_flags = ${mesh_tab_base.build_flags}
-  -D LGFX_SCREEN_WIDTH=240
-  -D LGFX_SCREEN_HEIGHT=320
-  -D LGFX_PANEL=ST7789
-  -D LGFX_INVERT_COLOR=false
-  -D LGFX_RGB_ORDER=false
-  -D LGFX_ROTATION=3
  -D LGFX_TOUCH=XPT2046
-  -D SPI_FREQUENCY=60000000
  -D LGFX_TOUCH_SPI_FREQ=2500000
  -D LGFX_TOUCH_SPI_HOST=2
  -D LGFX_TOUCH_CS=7
@@ -78,156 +67,109 @@ build_flags = ${mesh_tab_base.build_flags}
  -D LGFX_TOUCH_X_MAX=3900
  -D LGFX_TOUCH_Y_MIN=400
  -D LGFX_TOUCH_Y_MAX=3900
+
+[mesh_tab_ft5x06]
+extends = mesh_tab_base
+build_flags = ${mesh_tab_base.build_flags}
+  -D LGFX_TOUCH=FT5x06
+  -D LGFX_TOUCH_I2C_FREQ=400000
+  -D LGFX_TOUCH_I2C_PORT=0
+  -D LGFX_TOUCH_I2C_ADDR=0x38
+  -D LGFX_TOUCH_I2C_SDA=8
+  -D LGFX_TOUCH_I2C_SCL=9
+  -D LGFX_TOUCH_RST=7
+
+; 3.2" TN TFT ST7789 / XPT2046: https://vi.aliexpress.com/item/1005005933490544.html
+[env:mesh-tab-3-2-TN-resistive]
+extends = mesh_tab_base
+build_flags = ${mesh_tab_xpt2046.build_flags}
+  -D SPI_FREQUENCY=60000000
+  -D LGFX_SCREEN_WIDTH=240
+  -D LGFX_SCREEN_HEIGHT=320
+  -D LGFX_PANEL=ST7789
+  -D LGFX_INVERT_COLOR=false
+  -D LGFX_ROTATION=3
  -D LGFX_TOUCH_ROTATION=4

 ; 3.2" IPS TFT ILI9341 / XPT2046: https://www.aliexpress.com/item/1005006258575617.html
 [env:mesh-tab-3-2-IPS-resistive]
 extends = mesh_tab_base
-build_flags = ${mesh_tab_base.build_flags}
+build_flags = ${mesh_tab_xpt2046.build_flags}
+  -D SPI_FREQUENCY=60000000 ; if image is distorted then lower to 40 MHz
  -D LGFX_SCREEN_WIDTH=240
  -D LGFX_SCREEN_HEIGHT=320
  -D LGFX_PANEL=ILI9341
-  -D LGFX_INVERT_COLOR=true
-  -D LGFX_RGB_ORDER=false
  -D LGFX_ROTATION=1
-  -D LGFX_TOUCH=XPT2046
-  -D SPI_FREQUENCY=60000000 ; if image is distorted then lower to 40 MHz
-  -D LGFX_TOUCH_SPI_FREQ=2500000
-  -D LGFX_TOUCH_SPI_HOST=2
-  -D LGFX_TOUCH_CS=7
-  -D LGFX_TOUCH_CLK=12
-  -D LGFX_TOUCH_DO=11
-  -D LGFX_TOUCH_DIN=13
-  -D LGFX_TOUCH_X_MIN=300
-  -D LGFX_TOUCH_X_MAX=3900
-  -D LGFX_TOUCH_Y_MIN=400
-  -D LGFX_TOUCH_Y_MAX=3900
  -D LGFX_TOUCH_ROTATION=4

 ; 3.5" IPS TFT ILI9488 / XPT2046: https://vi.aliexpress.com/item/1005006333922639.html
 [env:mesh-tab-3-5-IPS-resistive]
 extends = mesh_tab_base
-build_flags = ${mesh_tab_base.build_flags}
+build_flags = ${mesh_tab_xpt2046.build_flags}
+  -D SPI_FREQUENCY=60000000 ; may go higher upto 40/60/80 MHz
  -D DISPLAY_SET_RESOLUTION
  -D LGFX_SCREEN_WIDTH=320
  -D LGFX_SCREEN_HEIGHT=480
  -D LGFX_PANEL=ILI9488
-  -D LGFX_INVERT_COLOR=true
-  -D LGFX_RGB_ORDER=false
-  -D LGFX_DLEN_16BITS=false
  -D LGFX_ROTATION=0
-  -D LGFX_TOUCH=XPT2046
-  -D SPI_FREQUENCY=40000000 ; may go higher upto 40/60/80 MHz
-  -D LGFX_TOUCH_SPI_FREQ=2500000
-  -D LGFX_TOUCH_SPI_HOST=2
-  -D LGFX_TOUCH_CS=7
-  -D LGFX_TOUCH_CLK=12
-  -D LGFX_TOUCH_DO=11
-  -D LGFX_TOUCH_DIN=13
-  -D LGFX_TOUCH_X_MIN=300
-  -D LGFX_TOUCH_X_MAX=3900
-  -D LGFX_TOUCH_Y_MIN=400
-  -D LGFX_TOUCH_Y_MAX=3900
  -D LGFX_TOUCH_ROTATION=0

 ; 3.5" TN TFT ILI9488 / XPT2046: https://vi.aliexpress.com/item/32985467436.html
 [env:mesh-tab-3-5-TN-resistive]
 extends = mesh_tab_base
-build_flags = ${mesh_tab_base.build_flags}
+build_flags = ${mesh_tab_xpt2046.build_flags}
+  -D SPI_FREQUENCY=60000000
  -D DISPLAY_SET_RESOLUTION
  -D LGFX_SCREEN_WIDTH=320
  -D LGFX_SCREEN_HEIGHT=480
  -D LGFX_PANEL=HX8357B
-  -D SPI_FREQUENCY=60000000
  -D LGFX_INVERT_COLOR=false
-  -D LGFX_RGB_ORDER=false
-  -D LGFX_DLEN_16BITS=false
  -D LGFX_ROTATION=4
-  -D LGFX_TOUCH=XPT2046
-  -D LGFX_TOUCH_SPI_FREQ=2500000
-  -D LGFX_TOUCH_SPI_HOST=2
-  -D LGFX_TOUCH_CS=7
-  -D LGFX_TOUCH_CLK=12
-  -D LGFX_TOUCH_DO=11
-  -D LGFX_TOUCH_DIN=13
-  -D LGFX_TOUCH_X_MIN=300
-  -D LGFX_TOUCH_X_MAX=3900
-  -D LGFX_TOUCH_Y_MIN=400
-  -D LGFX_TOUCH_Y_MAX=3900
  -D LGFX_TOUCH_ROTATION=2

 ; 3.2" IPS TFT ILI9341 / FT6236: https://vi.aliexpress.com/item/1005006624072350.html
 [env:mesh-tab-3-2-IPS-capacitive]
 extends = mesh_tab_base
-build_flags = ${mesh_tab_base.build_flags}
+build_flags = ${mesh_tab_ft5x06.build_flags}
+  -D SPI_FREQUENCY=75000000 ; may go higher upto 60/80 MHz
  -D LGFX_SCREEN_WIDTH=240
  -D LGFX_SCREEN_HEIGHT=320
  -D LGFX_PANEL=ILI9341
-  -D LGFX_INVERT_COLOR=true
-  -D LGFX_RGB_ORDER=false
  -D LGFX_ROTATION=1
-  -D LGFX_TOUCH=FT5x06
-  -D SPI_FREQUENCY=40000000 ; may go higher upto 60/80 MHz
-  -D LGFX_TOUCH_I2C_PORT=0
-  -D LGFX_TOUCH_I2C_ADDR=0x38
-  -D LGFX_TOUCH_I2C_SDA=8
-  -D LGFX_TOUCH_I2C_SCL=9
-  -D LGFX_TOUCH_RST=7
+  -D LGFX_TOUCH_X_MIN=0
+  -D LGFX_TOUCH_X_MAX=239
+  -D LGFX_TOUCH_Y_MIN=0
+  -D LGFX_TOUCH_Y_MAX=319
+  -D LGFX_TOUCH_ROTATION=2
+
+; 3.5" IPS TFT ILI9488 / FT6236: https://vi.aliexpress.com/item/1005006893699919.html
+[env:mesh-tab-3-5-IPS-capacitive]
+extends = mesh_tab_base
+build_flags = ${mesh_tab_ft5x06.build_flags}
+  -D SPI_FREQUENCY=75000000 ; may go higher upto 40/60/80 MHz
+  -D DISPLAY_SET_RESOLUTION
+  -D LGFX_SCREEN_WIDTH=320
+  -D LGFX_SCREEN_HEIGHT=480
+  -D LGFX_PANEL=ILI9488
+  -D LGFX_ROTATION=2
  -D LGFX_TOUCH_X_MIN=0
  -D LGFX_TOUCH_X_MAX=319
  -D LGFX_TOUCH_Y_MIN=0
  -D LGFX_TOUCH_Y_MAX=479
  -D LGFX_TOUCH_ROTATION=0
-  -D LGFX_TOUCH_I2C_FREQ=1000000
-
-; 3.5" IPS TFT ILI9488 / FT6236: https://vi.aliexpress.com/item/1005006893699919.html
-[env:mesh-tab-3-5-IPS-capacitive]
-extends = mesh_tab_base
-build_flags = ${mesh_tab_base.build_flags}
-  -D DISPLAY_SET_RESOLUTION
-  -D LGFX_SCREEN_WIDTH=320
-  -D LGFX_SCREEN_HEIGHT=480
-  -D LGFX_PANEL=ILI9488
-  -D LGFX_INVERT_COLOR=true
-  -D LGFX_RGB_ORDER=false
-  -D LGFX_DLEN_16BITS=false
-  -D LGFX_ROTATION=1
-  -D LGFX_TOUCH=FT5x06
-  -D SPI_FREQUENCY=30000000 ; may go higher upto 40/60/80 MHz
-  -D LGFX_TOUCH_I2C_PORT=0
-  -D LGFX_TOUCH_I2C_ADDR=0x38
-  -D LGFX_TOUCH_I2C_SDA=8
-  -D LGFX_TOUCH_I2C_SCL=9
-  -D LGFX_TOUCH_RST=7
-  -D LGFX_TOUCH_X_MIN=0
-  -D LGFX_TOUCH_X_MAX=319
-  -D LGFX_TOUCH_Y_MIN=0
-  -D LGFX_TOUCH_Y_MAX=479
-  -D LGFX_TOUCH_ROTATION=1
-  -D LGFX_TOUCH_I2C_FREQ=1000000

 ; 4.0" IPS TFT ILI9488 / FT6236: https://vi.aliexpress.com/item/1005007082906950.html
 [env:mesh-tab-4-0-IPS-capacitive]
 extends = mesh_tab_base
-build_flags = ${mesh_tab_base.build_flags}
+build_flags = ${mesh_tab_ft5x06.build_flags}
+  -D SPI_FREQUENCY=75000000
  -D DISPLAY_SET_RESOLUTION
  -D LGFX_SCREEN_WIDTH=320
  -D LGFX_SCREEN_HEIGHT=480
  -D LGFX_PANEL=HX8357B
-  -D LGFX_INVERT_COLOR=true
-  -D LGFX_RGB_ORDER=false
-  -D LGFX_DLEN_16BITS=false
  -D LGFX_ROTATION=4
-  -D LGFX_TOUCH=FT5x06
-  -D SPI_FREQUENCY=30000000 ; may go higher upto 40/60/80 MHz
-  -D LGFX_TOUCH_I2C_PORT=0
-  -D LGFX_TOUCH_I2C_ADDR=0x38
-  -D LGFX_TOUCH_I2C_SDA=8
-  -D LGFX_TOUCH_I2C_SCL=9
-  -D LGFX_TOUCH_RST=7
  -D LGFX_TOUCH_X_MIN=0
  -D LGFX_TOUCH_X_MAX=319
  -D LGFX_TOUCH_Y_MIN=0
  -D LGFX_TOUCH_Y_MAX=479
-  -D LGFX_TOUCH_ROTATION=1
-  -D LGFX_TOUCH_I2C_FREQ=1000000
+  -D LGFX_TOUCH_ROTATION=6
--- a/variants/meshlink/platformio.ini
+++ b/variants/meshlink/platformio.ini
@@ -0,0 +1,30 @@
+; MeshLink board developed by LoraItalia. NRF52840, eByte E22900M22S (Will also come with other frequencies), 25w MPPT solar charger (5v,12v,18v selectable), support for gps, buzzer, oled or e-ink display, 10 gpios, hardware watchdog
+; https://www.loraitalia.it
+; firmware for boards with or without oled display
+[env:meshlink]
+extends = nrf52840_base
+board = meshlink
+;board_check = true
+build_flags = ${nrf52840_base.build_flags} -I variants/meshlink -D MESHLINK
+  -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard"
+  -D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
+  -D EINK_DISPLAY_MODEL=GxEPD2_213_B74
+  -D EINK_WIDTH=250
+  -D EINK_HEIGHT=122
+  -D USE_EINK_DYNAMICDISPLAY            ; Enable Dynamic EInk
+  -D EINK_LIMIT_FASTREFRESH=5           ; How many consecutive fast-refreshes are permitted
+  -D EINK_LIMIT_RATE_BACKGROUND_SEC=30  ; Minimum interval between BACKGROUND updates
+  -D EINK_LIMIT_RATE_RESPONSIVE_SEC=1   ; Minimum interval between RESPONSIVE updates
+  -D EINK_LIMIT_GHOSTING_PX=2000        ; (Optional) How much image ghosting is tolerated
+  -D EINK_BACKGROUND_USES_FAST         ; (Optional) Use FAST refresh for both BACKGROUND and RESPONSIVE, until a limit is reached.
+  -D EINK_HASQUIRK_VICIOUSFASTREFRESH   ; Identify that pixels drawn by fast-refresh are harder to clear
+
+
+build_src_filter = ${nrf52_base.build_src_filter} +<../variants/meshlink>
+lib_deps = 
+  ${nrf52840_base.lib_deps}
+  https://github.com/meshtastic/GxEPD2/archive/55f618961db45a23eff0233546430f1e5a80f63a.zip
+debug_tool = jlink
+; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
+; Note: as of 6/2013 the serial/bootloader based programming takes approximately 30 seconds
+;upload_protocol = jlink
--- a/variants/meshlink/variant.cpp
+++ b/variants/meshlink/variant.cpp
@@ -0,0 +1,23 @@
+#include "variant.h"
+#include "nrf.h"
+#include "wiring_constants.h"
+#include "wiring_digital.h"
+
+const uint32_t g_ADigitalPinMap[] = {
+    // P0
+    0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+
+    // P1
+    32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
+
+void initVariant()
+{
+    pinMode(PIN_LED1, OUTPUT);
+    digitalWrite(PIN_LED1, HIGH); // turn off the white led while booting
+                                  // otherwise it will stay lit for several seconds (could be annoying)
+
+#ifdef PIN_WD_EN
+    pinMode(PIN_WD_EN, OUTPUT);
+    digitalWrite(PIN_WD_EN, HIGH); // Enable the Watchdog at boot
+#endif
+}
--- a/variants/meshlink/variant.h
+++ b/variants/meshlink/variant.h
@@ -0,0 +1,153 @@
+#ifndef _VARIANT_MESHLINK_
+#define _VARIANT_MESHLINK_
+#ifndef MESHLINK
+#define MESHLINK
+#endif
+/** Master clock frequency */
+#define VARIANT_MCK (64000000ul)
+
+// #define USE_LFXO // Board uses 32khz crystal for LF
+#define USE_LFRC // Board uses RC for LF
+
+/*----------------------------------------------------------------------------
+ *        Headers
+ *----------------------------------------------------------------------------*/
+
+#include "WVariant.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif // __cplusplus
+
+// Number of pins defined in PinDescription array
+#define PINS_COUNT (48)
+#define NUM_DIGITAL_PINS (48)
+#define NUM_ANALOG_INPUTS (2)
+#define NUM_ANALOG_OUTPUTS (0)
+
+#define BUTTON_PIN (-1) // If defined, this will be used for user button presses,
+#define BUTTON_NEED_PULLUP
+
+// LEDs
+#define PIN_LED1 (24) // Built in white led for status
+#define LED_BLUE PIN_LED1
+#define LED_BUILTIN PIN_LED1
+
+#define LED_STATE_ON 0 // State when LED is litted
+#define LED_INVERTED 1
+
+// Testing USB detection
+// #define NRF_APM
+
+/*
+ * Analog pins
+ */
+#define PIN_A1 (3) // P0.03/AIN1
+#define ADC_RESOLUTION 14
+
+// Other pins
+// #define PIN_AREF (2)
+// static const uint8_t AREF = PIN_AREF;
+
+/*
+ * Serial interfaces
+ */
+#define PIN_SERIAL1_RX (32 + 8)
+#define PIN_SERIAL1_TX (7)
+
+/*
+ * SPI Interfaces
+ */
+#define SPI_INTERFACES_COUNT 2
+
+#define PIN_SPI_MISO (8)
+#define PIN_SPI_MOSI (32 + 9)
+#define PIN_SPI_SCK (11)
+
+#define PIN_SPI1_MISO (23)
+#define PIN_SPI1_MOSI (21)
+#define PIN_SPI1_SCK (19)
+
+static const uint8_t SS = 12;
+static const uint8_t MOSI = PIN_SPI_MOSI;
+static const uint8_t MISO = PIN_SPI_MISO;
+static const uint8_t SCK = PIN_SPI_SCK;
+
+/*
+ * eink display pins
+ */
+// #define USE_EINK
+
+#define PIN_EINK_CS (15)
+#define PIN_EINK_BUSY (16)
+#define PIN_EINK_DC (14)
+#define PIN_EINK_RES (17)
+#define PIN_EINK_SCLK (19)
+#define PIN_EINK_MOSI (21) // also called SDI
+
+/*
+ * Wire Interfaces
+ */
+#define WIRE_INTERFACES_COUNT 1
+
+#define PIN_WIRE_SDA (1)
+#define PIN_WIRE_SCL (27)
+
+// QSPI Pins
+#define PIN_QSPI_SCK 19
+#define PIN_QSPI_CS 22
+#define PIN_QSPI_IO0 21
+#define PIN_QSPI_IO1 23
+#define PIN_QSPI_IO2 32
+#define PIN_QSPI_IO3 20
+
+// On-board QSPI Flash
+#define EXTERNAL_FLASH_DEVICES W25Q16JVUXIQ
+#define EXTERNAL_FLASH_USE_QSPI
+
+#define USE_SX1262
+#define SX126X_CS (12)
+#define SX126X_DIO1 (32 + 1)
+#define SX126X_BUSY (32 + 3)
+#define SX126X_RESET (6)
+// #define SX126X_RXEN (13)
+// DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+
+// pin 25 is used to enable or disable the watchdog. This pin has to be disabled when cpu is put to sleep
+// otherwise the timer will expire and wd will reboot the cpu
+#define PIN_WD_EN (25)
+
+#define PIN_GPS_PPS (26) // Pulse per second input from the GPS
+
+#define GPS_TX_PIN PIN_SERIAL1_RX // This is for bits going TOWARDS the CPU
+#define GPS_RX_PIN PIN_SERIAL1_TX // This is for bits going TOWARDS the GPS
+
+// #define GPS_THREAD_INTERVAL 50
+
+// Define pin to enable GPS toggle (set GPIO to LOW) via user button triple press
+#define PIN_GPS_EN (0)
+#define GPS_EN_ACTIVE LOW
+
+#define PIN_BUZZER (31) // P0.31/AIN7
+
+// Battery
+// The battery sense is hooked to pin A0 (2)
+#define BATTERY_PIN (2)
+// and has 12 bit resolution
+#define BATTERY_SENSE_RESOLUTION_BITS 12
+#define BATTERY_SENSE_RESOLUTION 4096.0
+#undef AREF_VOLTAGE
+#define AREF_VOLTAGE 3.0
+#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
+#define ADC_MULTIPLIER 1.42 // fine tuning of voltage
+
+#ifdef __cplusplus
+}
+#endif
+
+/*----------------------------------------------------------------------------
+ *        Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+#endif
--- a/variants/meshlink_eink/platformio.ini
+++ b/variants/meshlink_eink/platformio.ini
@@ -0,0 +1,30 @@
+; MeshLink board developed by LoraItalia. NRF52840, eByte E22900M22S (Will also come with other frequencies), 25w MPPT solar charger (5v,12v,18v selectable), support for gps, buzzer, oled or e-ink display, 10 gpios, hardware watchdog
+; https://www.loraitalia.it
+; firmware for boards with a 250x122 e-ink display
+[env:meshlink_eink]
+extends = nrf52840_base
+board = meshlink
+;board_check = true
+build_flags = ${nrf52840_base.build_flags} -I variants/meshlink_eink -D MESHLINK
+  -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard"
+  -D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
+  -D EINK_DISPLAY_MODEL=GxEPD2_213_B74
+  -D EINK_WIDTH=250
+  -D EINK_HEIGHT=122
+  -D USE_EINK_DYNAMICDISPLAY            ; Enable Dynamic EInk
+  -D EINK_LIMIT_FASTREFRESH=5           ; How many consecutive fast-refreshes are permitted
+  -D EINK_LIMIT_RATE_BACKGROUND_SEC=30  ; Minimum interval between BACKGROUND updates
+  -D EINK_LIMIT_RATE_RESPONSIVE_SEC=1   ; Minimum interval between RESPONSIVE updates
+  -D EINK_LIMIT_GHOSTING_PX=2000        ; (Optional) How much image ghosting is tolerated
+  -D EINK_BACKGROUND_USES_FAST         ; (Optional) Use FAST refresh for both BACKGROUND and RESPONSIVE, until a limit is reached.
+  -D EINK_HASQUIRK_VICIOUSFASTREFRESH   ; Identify that pixels drawn by fast-refresh are harder to clear
+
+
+build_src_filter = ${nrf52_base.build_src_filter} +<../variants/meshlink_eink>
+lib_deps = 
+  ${nrf52840_base.lib_deps}
+  https://github.com/meshtastic/GxEPD2/archive/55f618961db45a23eff0233546430f1e5a80f63a.zip
+debug_tool = jlink
+; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
+; Note: as of 6/2013 the serial/bootloader based programming takes approximately 30 seconds
+;upload_protocol = jlink
--- a/variants/meshlink_eink/variant.cpp
+++ b/variants/meshlink_eink/variant.cpp
@@ -0,0 +1,23 @@
+#include "variant.h"
+#include "nrf.h"
+#include "wiring_constants.h"
+#include "wiring_digital.h"
+
+const uint32_t g_ADigitalPinMap[] = {
+    // P0
+    0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+
+    // P1
+    32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
+
+void initVariant()
+{
+    pinMode(PIN_LED1, OUTPUT);
+    digitalWrite(PIN_LED1, HIGH); // turn off the white led while booting
+                                  // otherwise it will stay lit for several seconds (could be annoying)
+
+#ifdef PIN_WD_EN
+    pinMode(PIN_WD_EN, OUTPUT);
+    digitalWrite(PIN_WD_EN, HIGH); // Enable the Watchdog at boot
+#endif
+}
--- a/variants/meshlink_eink/variant.h
+++ b/variants/meshlink_eink/variant.h
@@ -0,0 +1,153 @@
+#ifndef _VARIANT_MESHLINK_
+#define _VARIANT_MESHLINK_
+#ifndef MESHLINK
+#define MESHLINK
+#endif
+/** Master clock frequency */
+#define VARIANT_MCK (64000000ul)
+
+// #define USE_LFXO // Board uses 32khz crystal for LF
+#define USE_LFRC // Board uses RC for LF
+
+/*----------------------------------------------------------------------------
+ *        Headers
+ *----------------------------------------------------------------------------*/
+
+#include "WVariant.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif // __cplusplus
+
+// Number of pins defined in PinDescription array
+#define PINS_COUNT (48)
+#define NUM_DIGITAL_PINS (48)
+#define NUM_ANALOG_INPUTS (2)
+#define NUM_ANALOG_OUTPUTS (0)
+
+#define BUTTON_PIN (-1) // If defined, this will be used for user button presses,
+#define BUTTON_NEED_PULLUP
+
+// LEDs
+#define PIN_LED1 (24) // Built in white led for status
+#define LED_BLUE PIN_LED1
+#define LED_BUILTIN PIN_LED1
+
+#define LED_STATE_ON 0 // State when LED is litted
+#define LED_INVERTED 1
+
+// Testing USB detection
+// #define NRF_APM
+
+/*
+ * Analog pins
+ */
+#define PIN_A1 (3) // P0.03/AIN1
+#define ADC_RESOLUTION 14
+
+// Other pins
+// #define PIN_AREF (2)
+// static const uint8_t AREF = PIN_AREF;
+
+/*
+ * Serial interfaces
+ */
+#define PIN_SERIAL1_RX (32 + 8)
+#define PIN_SERIAL1_TX (7)
+
+/*
+ * SPI Interfaces
+ */
+#define SPI_INTERFACES_COUNT 2
+
+#define PIN_SPI_MISO (8)
+#define PIN_SPI_MOSI (32 + 9)
+#define PIN_SPI_SCK (11)
+
+#define PIN_SPI1_MISO (23)
+#define PIN_SPI1_MOSI (21)
+#define PIN_SPI1_SCK (19)
+
+static const uint8_t SS = 12;
+static const uint8_t MOSI = PIN_SPI_MOSI;
+static const uint8_t MISO = PIN_SPI_MISO;
+static const uint8_t SCK = PIN_SPI_SCK;
+
+/*
+ * eink display pins
+ */
+#define USE_EINK
+
+#define PIN_EINK_CS (15)
+#define PIN_EINK_BUSY (16)
+#define PIN_EINK_DC (14)
+#define PIN_EINK_RES (17)
+#define PIN_EINK_SCLK (19)
+#define PIN_EINK_MOSI (21) // also called SDI
+
+/*
+ * Wire Interfaces
+ */
+#define WIRE_INTERFACES_COUNT 1
+
+#define PIN_WIRE_SDA (1)
+#define PIN_WIRE_SCL (27)
+
+// QSPI Pins
+#define PIN_QSPI_SCK 19
+#define PIN_QSPI_CS 22
+#define PIN_QSPI_IO0 21
+#define PIN_QSPI_IO1 23
+#define PIN_QSPI_IO2 32
+#define PIN_QSPI_IO3 20
+
+// On-board QSPI Flash
+#define EXTERNAL_FLASH_DEVICES W25Q16JVUXIQ
+#define EXTERNAL_FLASH_USE_QSPI
+
+#define USE_SX1262
+#define SX126X_CS (12)
+#define SX126X_DIO1 (32 + 1)
+#define SX126X_BUSY (32 + 3)
+#define SX126X_RESET (6)
+// #define SX126X_RXEN (13)
+// DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+
+// pin 25 is used to enable or disable the watchdog. This pin has to be disabled when cpu is put to sleep
+// otherwise the timer will expire and wd will reboot the cpu
+#define PIN_WD_EN (25)
+
+#define PIN_GPS_PPS (26) // Pulse per second input from the GPS
+
+#define GPS_TX_PIN PIN_SERIAL1_RX // This is for bits going TOWARDS the CPU
+#define GPS_RX_PIN PIN_SERIAL1_TX // This is for bits going TOWARDS the GPS
+
+// #define GPS_THREAD_INTERVAL 50
+
+// Define pin to enable GPS toggle (set GPIO to LOW) via user button triple press
+#define PIN_GPS_EN (0)
+#define GPS_EN_ACTIVE LOW
+
+#define PIN_BUZZER (31) // P0.31/AIN7
+
+// Battery
+// The battery sense is hooked to pin A0 (2)
+#define BATTERY_PIN (2)
+// and has 12 bit resolution
+#define BATTERY_SENSE_RESOLUTION_BITS 12
+#define BATTERY_SENSE_RESOLUTION 4096.0
+#undef AREF_VOLTAGE
+#define AREF_VOLTAGE 3.0
+#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
+#define ADC_MULTIPLIER 1.42 // fine tuning of voltage
+
+#ifdef __cplusplus
+}
+#endif
+
+/*----------------------------------------------------------------------------
+ *        Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+#endif
--- a/variants/monteops_hw1/platformio.ini
+++ b/variants/monteops_hw1/platformio.ini
@@ -9,7 +9,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/monteops_hw1> +<
 lib_deps = 
  ${nrf52840_base.lib_deps}
  ${networking_base.lib_deps}
-  https://github.com/RAKWireless/RAK13800-W5100S.git#1.0.2
+  https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ;upload_protocol = jlink
--- a/variants/my_esp32s3_diy_eink/platformio.ini
+++ b/variants/my_esp32s3_diy_eink/platformio.ini
@@ -9,12 +9,14 @@ upload_protocol = esptool
 ;upload_port = /dev/ttyACM1
 upload_speed = 921600
 platform_packages =
-  tool-esptoolpy@^1.40500.0
+  platformio/tool-esptoolpy@^1.40801.0
 lib_deps =
  ${esp32_base.lib_deps}
-  zinggjm/GxEPD2@^1.5.1
+  zinggjm/GxEPD2@^1.6.2
  adafruit/Adafruit NeoPixel @ ^1.12.0
-build_unflags = -DARDUINO_USB_MODE=1
+build_unflags =
+  ${esp32s3_base.build_unflags}
+  -DARDUINO_USB_MODE=1
 build_flags = 
  ;${esp32_base.build_flags} -D MY_ESP32S3_DIY -I variants/my_esp32s3_diy_eink
  ${esp32_base.build_flags} -D PRIVATE_HW -I variants/my_esp32s3_diy_eink
--- a/variants/my_esp32s3_diy_oled/platformio.ini
+++ b/variants/my_esp32s3_diy_oled/platformio.ini
@@ -9,11 +9,13 @@ upload_protocol = esptool
 ;upload_port = /dev/ttyACM0
 upload_speed = 921600
 platform_packages =
-  tool-esptoolpy@^1.40500.0
+  platformio/tool-esptoolpy@^1.40801.0
 lib_deps =
  ${esp32_base.lib_deps}
  adafruit/Adafruit NeoPixel @ ^1.12.0
-build_unflags = -DARDUINO_USB_MODE=1
+build_unflags =
+  ${esp32s3_base.build_unflags}
+  -DARDUINO_USB_MODE=1
 build_flags = 
  ;${esp32_base.build_flags} -D MY_ESP32S3_DIY -I variants/my_esp32s3_diy_oled
  ${esp32_base.build_flags} -D PRIVATE_HW -I variants/my_esp32s3_diy_oled
--- a/variants/picomputer-s3/platformio.ini
+++ b/variants/picomputer-s3/platformio.ini
@@ -1,7 +1,8 @@
 [env:picomputer-s3]
 extends = esp32s3_base
 board = bpi_picow_esp32_s3
-
+board_check = true
+board_build.partitions = default_8MB.csv
 ;OpenOCD flash method
 ;upload_protocol = esp-builtin
 ;Normal method
@@ -14,4 +15,45 @@ build_flags =

 lib_deps = 
  ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@^1.1.8
+  lovyan03/LovyanGFX@^1.2.0
+
+build_src_filter =
+  ${esp32s3_base.build_src_filter}
+
+
+[env:picomputer-s3-tft]
+extends = env:picomputer-s3
+
+build_flags =
+  ${env:picomputer-s3.build_flags}
+  -D MESHTASTIC_EXCLUDE_CANNEDMESSAGES=1
+  -D MESHTASTIC_EXCLUDE_INPUTBROKER=1
+  -D MESHTASTIC_EXCLUDE_BLUETOOTH=1
+  -D MESHTASTIC_EXCLUDE_WEBSERVER=1
+  -D MESHTASTIC_EXCLUDE_SERIAL=1
+  -D MESHTASTIC_EXCLUDE_SOCKETAPI=1
+  -D INPUTDRIVER_MATRIX_TYPE=1
+  -D USE_PIN_BUZZER=PIN_BUZZER
+  -D USE_SX127x
+  -D HAS_SCREEN=0
+  -D HAS_TFT=1
+  -D RAM_SIZE=1024
+	-D LV_LVGL_H_INCLUDE_SIMPLE
+	-D LV_CONF_INCLUDE_SIMPLE
+	-D LV_COMP_CONF_INCLUDE_SIMPLE
+  -D LV_USE_SYSMON=0
+  -D LV_USE_PROFILER=0
+  -D LV_USE_PERF_MONITOR=0
+  -D LV_USE_MEM_MONITOR=0
+  -D LV_USE_LOG=0
+  -D USE_LOG_DEBUG
+  -D LOG_DEBUG_INC=\"DebugConfiguration.h\"
+  -D LGFX_DRIVER=LGFX_PICOMPUTER_S3
+  -D GFX_DRIVER_INC=\"graphics/LGFX/LGFX_PICOMPUTER_S3.h\"
+  -D VIEW_320x240
+;	-D USE_DOUBLE_BUFFER
+  -D USE_PACKET_API
+
+lib_deps =
+  ${env:picomputer-s3.lib_deps}
+  ${device-ui_base.lib_deps}
--- a/variants/portduino/platformio.ini
+++ b/variants/portduino/platformio.ini
@@ -1,15 +1,81 @@
-[env:native]
+[native_base]
 extends = portduino_base
-; The pkg-config commands below optionally add link flags.
-; the || : is just a "or run the null command" to avoid returning an error code
-build_flags = ${portduino_base.build_flags} -O0 -I variants/portduino
+build_flags = ${portduino_base.build_flags} -I variants/portduino
+  -D ARCH_PORTDUINO
  -I /usr/include
-  !pkg-config --libs libulfius --silence-errors || :
-  !pkg-config --libs openssl --silence-errors || :
 board = cross_platform
 lib_deps = ${portduino_base.lib_deps}
 build_src_filter = ${portduino_base.build_src_filter}

+[env:native]
+extends = native_base
+; The pkg-config commands below optionally add link flags.
+; the || : is just a "or run the null command" to avoid returning an error code
+build_flags = ${native_base.build_flags}
+  !pkg-config --libs libulfius --silence-errors || :
+  !pkg-config --libs openssl --silence-errors || :
+
+[env:native-tft]
+extends = native_base
+build_type = release
+lib_deps =
+  ${native_base.lib_deps}
+  ${device-ui_base.lib_deps}
+build_flags = ${native_base.build_flags} -Os -lX11 -linput -lxkbcommon -ffunction-sections -fdata-sections -Wl,--gc-sections
+  -D MESHTASTIC_EXCLUDE_CANNEDMESSAGES=1
+  -D RAM_SIZE=16384
+  -D USE_X11=1
+  -D HAS_TFT=1
+  -D HAS_SCREEN=0
+  -D LV_CACHE_DEF_SIZE=6291456
+  -D LV_BUILD_TEST=0
+  -D LV_USE_LIBINPUT=1
+  -D LV_LVGL_H_INCLUDE_SIMPLE
+  -D LV_CONF_INCLUDE_SIMPLE
+  -D LV_COMP_CONF_INCLUDE_SIMPLE
+  -D USE_LOG_DEBUG
+  -D LOG_DEBUG_INC=\"DebugConfiguration.h\"
+  -D USE_PACKET_API
+  -D VIEW_320x240
+  !pkg-config --libs libulfius --silence-errors || :
+  !pkg-config --libs openssl --silence-errors || :
+build_src_filter =
+  ${native_base.build_src_filter}
+  -<graphics/TFTDisplay.cpp>
+
+[env:native-tft-debug]
+extends = native_base
+build_type = debug
+lib_deps =
+  ${native_base.lib_deps}
+  ${device-ui_base.lib_deps}
+board_level = extra
+build_flags = ${native_base.build_flags} -O0 -fsanitize=address -lX11 -linput -lxkbcommon
+  -D MESHTASTIC_EXCLUDE_CANNEDMESSAGES=1
+  -D DEBUG_HEAP
+  -D RAM_SIZE=16384
+  -D USE_X11=1
+  -D HAS_TFT=1
+  -D HAS_SCREEN=0
+  -D LV_CACHE_DEF_SIZE=6291456
+  -D LV_BUILD_TEST=0
+  -D LV_USE_LOG=1
+  -D LV_USE_SYSMON=1
+  -D LV_USE_PERF_MONITOR=1
+  -D LV_USE_MEM_MONITOR=0
+  -D LV_USE_PROFILER=0
+  -D LV_USE_LIBINPUT=1
+  -D LV_LVGL_H_INCLUDE_SIMPLE
+  -D LV_CONF_INCLUDE_SIMPLE
+  -D LV_COMP_CONF_INCLUDE_SIMPLE
+  -D USE_LOG_DEBUG
+  -D LOG_DEBUG_INC=\"DebugConfiguration.h\"
+  -D USE_PACKET_API
+  -D VIEW_320x240
+  !pkg-config --libs libulfius --silence-errors || :
+  !pkg-config --libs openssl --silence-errors || :
+build_src_filter = ${env:native-tft.build_src_filter}
+
 [env:coverage]
 extends = env:native
-build_flags = -lgcov --coverage -fprofile-abs-path ${env:native.build_flags}
+build_flags = -lgcov --coverage -fprofile-abs-path -fsanitize=address ${env:native.build_flags}
--- a/variants/portduino/variant.h
+++ b/variants/portduino/variant.h
@@ -1,4 +1,6 @@
+#ifndef HAS_SCREEN
 #define HAS_SCREEN 1
+#endif
 #define CANNED_MESSAGE_MODULE_ENABLE 1
 #define HAS_GPS 1
 #define MAX_RX_TOPHONE settingsMap[maxtophone]
--- a/variants/radiomaster_900_bandit/platformio.ini
+++ b/variants/radiomaster_900_bandit/platformio.ini
@@ -13,4 +13,4 @@ board_build.f_cpu = 240000000L
 upload_protocol = esptool
 lib_deps =
  ${esp32_base.lib_deps}
-  https://github.com/gjelsoe/STK8xxx-Accelerometer.git#v0.1.1
+  https://github.com/gjelsoe/STK8xxx-Accelerometer/archive/v0.1.1.zip
--- a/variants/rak11310/pins_arduino.h
+++ b/variants/rak11310/pins_arduino.h
@@ -38,15 +38,15 @@ static const uint8_t A3 = PIN_A3;
 #define PIN_SERIAL2_RX (5ul)

 // SPI
-#define PIN_SPI0_MISO (12u)
-#define PIN_SPI0_MOSI (11u)
-#define PIN_SPI0_SCK (10u)
-#define PIN_SPI0_SS (13u)
+#define PIN_SPI1_MISO (12u)
+#define PIN_SPI1_MOSI (11u)
+#define PIN_SPI1_SCK (10u)
+#define PIN_SPI1_SS (13u)

-#define PIN_SPI1_MISO (16u)
-#define PIN_SPI1_MOSI (19u)
-#define PIN_SPI1_SCK (18u)
-#define PIN_SPI1_SS (17u)
+#define PIN_SPI0_MISO (16u)
+#define PIN_SPI0_MOSI (19u)
+#define PIN_SPI0_SCK (18u)
+#define PIN_SPI0_SS (17u)

 // Wire
 #define PIN_WIRE0_SDA (2u)
@@ -65,4 +65,4 @@ static const uint8_t MISO = PIN_SPI0_MISO;
 static const uint8_t SCK = PIN_SPI0_SCK;

 static const uint8_t SDA = PIN_WIRE0_SDA;
-static const uint8_t SCL = PIN_WIRE0_SCL;
+static const uint8_t SCL = PIN_WIRE0_SCL;
--- a/variants/rak11310/platformio.ini
+++ b/variants/rak11310/platformio.ini
@@ -1,18 +1,20 @@
 [env:rak11310]
 extends = rp2040_base
-board = wiscore_rak11300
+board = rakwireless_rak11300
 upload_protocol = picotool
-# keep an old SDK to use less memory.
-platform = https://github.com/maxgerhardt/platform-raspberrypi.git#v1.2.0-gcc12
-platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#3.7.2

 # add our variants files to the include and src paths
 build_flags = ${rp2040_base.build_flags} 
  -DRAK11310
  -Ivariants/rak11310
  -DDEBUG_RP2040_PORT=Serial
+  -DRV3028_RTC=0x52
  -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m0plus"
+build_src_filter = ${rp2040_base.build_src_filter} +<../variants/rak11310> +<mesh/eth/> +<mesh/api/> +<mqtt/>
 lib_deps =
  ${rp2040_base.lib_deps}
+  ${networking_base.lib_deps}
+  melopero/Melopero RV3028@^1.1.0
+  https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
 debug_build_flags = ${rp2040_base.build_flags}, -g
 debug_tool = cmsis-dap ; for e.g. Picotool
--- a/variants/rak11310/variant.h
+++ b/variants/rak11310/variant.h
@@ -4,6 +4,12 @@

 #define ARDUINO_ARCH_AVR

+// Define I2C pins to ensure correct usage of both ports
+#define I2C_SDA 20
+#define I2C_SCL 21
+#define I2C_SDA1 2
+#define I2C_SCL1 3
+
 #define LED_CONN PIN_LED2
 #define LED_PIN LED_BUILTIN
 #define ledOff(pin) pinMode(pin, INPUT)
@@ -28,10 +34,10 @@

 // RAK BSP somehow uses SPI1 instead of SPI0
 #define HW_SPI1_DEVICE
-#define LORA_SCK PIN_SPI0_SCK
-#define LORA_MOSI PIN_SPI0_MOSI
-#define LORA_MISO PIN_SPI0_MISO
-#define LORA_CS PIN_SPI0_SS
+#define LORA_SCK (10u)
+#define LORA_MOSI (11u)
+#define LORA_MISO (12u)
+#define LORA_CS (13u)

 #define LORA_DIO0 RADIOLIB_NC
 #define LORA_RESET 14
@@ -49,3 +55,10 @@
 #define SX126X_DIO2_AS_RF_SWITCH
 #define SX126X_DIO3_TCXO_VOLTAGE 1.8
 #endif
+
+#define HAS_ETHERNET 1
+#define PIN_ETHERNET_RESET 7 // IO3
+#define PIN_ETHERNET_SS 17
+#define ETH_SPI_PORT SPI
+
+#define PIN_ETH_POWER_EN 22
--- a/variants/rak2560/RAK9154Sensor.cpp
+++ b/variants/rak2560/RAK9154Sensor.cpp
@@ -1,183 +0,0 @@
-#ifdef HAS_RAKPROT
-#include "../variants/rak2560/RAK9154Sensor.h"
-#include "../mesh/generated/meshtastic/telemetry.pb.h"
-#include "../modules/Telemetry/Sensor/TelemetrySensor.h"
-#include "configuration.h"
-
-#include "concurrency/Periodic.h"
-#include <RAK-OneWireSerial.h>
-
-using namespace concurrency;
-
-#define BOOT_DATA_REQ
-
-RAK9154Sensor::RAK9154Sensor() : TelemetrySensor(meshtastic_TelemetrySensorType_SENSOR_UNSET, "RAK1954") {}
-
-static Periodic *onewirePeriodic;
-
-static SoftwareHalfSerial mySerial(HALF_UART_PIN); // Wire pin  P0.15
-
-static uint8_t buff[0x100];
-static uint16_t bufflen = 0;
-
-static int16_t dc_cur = 0;
-static uint16_t dc_vol = 0;
-static uint8_t dc_prec = 0;
-static uint8_t provision = 0;
-
-static void onewire_evt(const uint8_t pid, const uint8_t sid, const SNHUBAPI_EVT_E eid, uint8_t *msg, uint16_t len)
-{
-    switch (eid) {
-    case SNHUBAPI_EVT_RECV_REQ:
-    case SNHUBAPI_EVT_RECV_RSP:
-        break;
-
-    case SNHUBAPI_EVT_QSEND:
-        mySerial.write(msg, len);
-        break;
-
-    case SNHUBAPI_EVT_ADD_SID:
-        // LOG_INFO("+ADD:SID:[%02x]", msg[0]);
-        break;
-
-    case SNHUBAPI_EVT_ADD_PID:
-        // LOG_INFO("+ADD:PID:[%02x]", msg[0]);
-#ifdef BOOT_DATA_REQ
-        provision = msg[0];
-#endif
-        break;
-
-    case SNHUBAPI_EVT_GET_INTV:
-        break;
-
-    case SNHUBAPI_EVT_GET_ENABLE:
-        break;
-
-    case SNHUBAPI_EVT_SDATA_REQ:
-
-        // LOG_INFO("+EVT:PID[%02x],IPSO[%02x]",pid,msg[0]);
-        // for( uint16_t i=1; i<len; i++)
-        // {
-        //     LOG_INFO("%02x,", msg[i]);
-        // }
-        // LOG_INFO("");
-        switch (msg[0]) {
-        case RAK_IPSO_CAPACITY:
-            dc_prec = msg[1];
-            if (dc_prec > 100) {
-                dc_prec = 100;
-            }
-            break;
-        case RAK_IPSO_DC_CURRENT:
-            dc_cur = (msg[2] << 8) + msg[1];
-            break;
-        case RAK_IPSO_DC_VOLTAGE:
-            dc_vol = (msg[2] << 8) + msg[1];
-            dc_vol *= 10;
-            break;
-        default:
-            break;
-        }
-
-        break;
-    case SNHUBAPI_EVT_REPORT:
-
-        // LOG_INFO("+EVT:PID[%02x],IPSO[%02x]",pid,msg[0]);
-        // for( uint16_t i=1; i<len; i++)
-        // {
-        //     LOG_INFO("%02x,", msg[i]);
-        // }
-        // LOG_INFO("");
-
-        switch (msg[0]) {
-        case RAK_IPSO_CAPACITY:
-            dc_prec = msg[1];
-            if (dc_prec > 100) {
-                dc_prec = 100;
-            }
-            break;
-        case RAK_IPSO_DC_CURRENT:
-            dc_cur = (msg[1] << 8) + msg[2];
-            break;
-        case RAK_IPSO_DC_VOLTAGE:
-            dc_vol = (msg[1] << 8) + msg[2];
-            dc_vol *= 10;
-            break;
-        default:
-            break;
-        }
-
-        break;
-
-    case SNHUBAPI_EVT_CHKSUM_ERR:
-        LOG_INFO("+ERR:CHKSUM");
-        break;
-
-    case SNHUBAPI_EVT_SEQ_ERR:
-        LOG_INFO("+ERR:SEQUCE");
-        break;
-
-    default:
-        break;
-    }
-}
-
-static int32_t onewireHandle()
-{
-    if (provision != 0) {
-        RakSNHub_Protocl_API.get.data(provision);
-        provision = 0;
-    }
-
-    while (mySerial.available()) {
-        char a = mySerial.read();
-        buff[bufflen++] = a;
-        delay(2); // continue data, timeout=2ms
-    }
-
-    if (bufflen != 0) {
-        RakSNHub_Protocl_API.process((uint8_t *)buff, bufflen);
-        bufflen = 0;
-    }
-
-    return 50;
-}
-
-int32_t RAK9154Sensor::runOnce()
-{
-    onewirePeriodic = new Periodic("onewireHandle", onewireHandle);
-
-    mySerial.begin(9600);
-
-    RakSNHub_Protocl_API.init(onewire_evt);
-
-    status = true;
-    initialized = true;
-    return 0;
-}
-
-void RAK9154Sensor::setup()
-{
-    // Set up oversampling and filter initialization
-}
-
-bool RAK9154Sensor::getMetrics(meshtastic_Telemetry *measurement)
-{
-    return true;
-}
-
-uint16_t RAK9154Sensor::getBusVoltageMv()
-{
-    return dc_vol;
-}
-
-int RAK9154Sensor::getBusBatteryPercent()
-{
-    return (int)dc_prec;
-}
-
-bool RAK9154Sensor::isCharging()
-{
-    return (dc_cur > 0) ? true : false;
-}
-#endif // HAS_RAKPROT
--- a/variants/rak2560/RAK9154Sensor.h
+++ b/variants/rak2560/RAK9154Sensor.h
@@ -1,23 +0,0 @@
-#ifdef HAS_RAKPROT
-#ifndef _RAK9154SENSOR_H
-#define _RAK9154SENSOR_H 1
-#include "../mesh/generated/meshtastic/telemetry.pb.h"
-#include "../modules/Telemetry/Sensor/TelemetrySensor.h"
-#include "../modules/Telemetry/Sensor/VoltageSensor.h"
-
-class RAK9154Sensor : public TelemetrySensor, VoltageSensor
-{
-  private:
-  protected:
-    virtual void setup() override;
-
-  public:
-    RAK9154Sensor();
-    virtual int32_t runOnce() override;
-    virtual bool getMetrics(meshtastic_Telemetry *measurement) override;
-    virtual uint16_t getBusVoltageMv() override;
-    int getBusBatteryPercent();
-    bool isCharging();
-};
-#endif // _RAK9154SENSOR_H
-#endif // HAS_RAKPROT
--- a/variants/rak2560/create_uf2.py
+++ b/variants/rak2560/create_uf2.py
@@ -1,113 +0,0 @@
-import struct
-
-Import("env")  # noqa: F821
-
-
-# Parse input and create UF2 file
-def create_uf2(source, target, env):
-    # source_hex = target[0].get_abspath()
-    source_hex = target[0].get_string(False)
-    source_hex = ".\\" + source_hex
-    print("#########################################################")
-    print("Create UF2 from " + source_hex)
-    print("#########################################################")
-    # print("Source: " + source_hex)
-    target = source_hex.replace(".hex", "")
-    target = target + ".uf2"
-    # print("Target: " + target)
-
-    with open(source_hex, mode="rb") as f:
-        inpbuf = f.read()
-
-    outbuf = convert_from_hex_to_uf2(inpbuf.decode("utf-8"))
-
-    write_file(target, outbuf)
-    print("#########################################################")
-    print(target + " is ready to flash to target device")
-    print("#########################################################")
-
-
-# Add callback after .hex file was created
-env.AddPostAction("$BUILD_DIR/${PROGNAME}.hex", create_uf2)  # noqa: F821
-
-# UF2 creation taken from uf2conv.py
-UF2_MAGIC_START0 = 0x0A324655  # "UF2\n"
-UF2_MAGIC_START1 = 0x9E5D5157  # Randomly selected
-UF2_MAGIC_END = 0x0AB16F30  # Ditto
-
-familyid = 0xADA52840
-
-
-class Block:
-    def __init__(self, addr):
-        self.addr = addr
-        self.bytes = bytearray(256)
-
-    def encode(self, blockno, numblocks):
-        global familyid
-        flags = 0x0
-        if familyid:
-            flags |= 0x2000
-        hd = struct.pack(
-            "<IIIIIIII",
-            UF2_MAGIC_START0,
-            UF2_MAGIC_START1,
-            flags,
-            self.addr,
-            256,
-            blockno,
-            numblocks,
-            familyid,
-        )
-        hd += self.bytes[0:256]
-        while len(hd) < 512 - 4:
-            hd += b"\x00"
-        hd += struct.pack("<I", UF2_MAGIC_END)
-        return hd
-
-
-def write_file(name, buf):
-    with open(name, "wb") as f:
-        f.write(buf)
-    # print("Wrote %d bytes to %s." % (len(buf), name))
-
-
-def convert_from_hex_to_uf2(buf):
-    global appstartaddr
-    appstartaddr = None
-    upper = 0
-    currblock = None
-    blocks = []
-    for line in buf.split("\n"):
-        if line[0] != ":":
-            continue
-        i = 1
-        rec = []
-        while i < len(line) - 1:
-            rec.append(int(line[i : i + 2], 16))
-            i += 2
-        tp = rec[3]
-        if tp == 4:
-            upper = ((rec[4] << 8) | rec[5]) << 16
-        elif tp == 2:
-            upper = ((rec[4] << 8) | rec[5]) << 4
-            assert (upper & 0xFFFF) == 0
-        elif tp == 1:
-            break
-        elif tp == 0:
-            addr = upper | (rec[1] << 8) | rec[2]
-            if appstartaddr is None:
-                appstartaddr = addr
-            i = 4
-            while i < len(rec) - 1:
-                if not currblock or currblock.addr & ~0xFF != addr & ~0xFF:
-                    currblock = Block(addr & ~0xFF)
-                    blocks.append(currblock)
-                currblock.bytes[addr & 0xFF] = rec[i]
-                addr += 1
-                i += 1
-    numblocks = len(blocks)
-    resfile = b""
-    for i in range(0, numblocks):
-        resfile += blocks[i].encode(i, numblocks)
-    return resfile
--- a/variants/rak2560/platformio.ini
+++ b/variants/rak2560/platformio.ini
@@ -1,4 +1,4 @@
-; The very slick RAK wireless RAK 4631 / 4630 board - Unified firmware for 5005/19003, with or without OLED RAK 1921
+; Firmware for the WisMesh HUB RAK2560, including a onewire module to talk to the RAK 9154 solar battery.
 [env:rak2560]
 extends = nrf52840_base
 board = wiscore_rak4631
@@ -6,17 +6,16 @@ board_check = true
 build_flags = ${nrf52840_base.build_flags} -Ivariants/rak2560 -D RAK_4631
  -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard"
  -DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
-  -DMESHTASTIC_EXCLUDE_GPS=1
+  -DRADIOLIB_EXCLUDE_SX128X=1
+  -DRADIOLIB_EXCLUDE_SX127X=1
+  -DRADIOLIB_EXCLUDE_LR11X0=1
  -DHAS_RAKPROT=1 ; Define if RAk OneWireSerial is used (disables GPS)
-build_src_filter = ${nrf52_base.build_src_filter} +<../variants/rak2560> +<mesh/eth/> +<mesh/api/> +<mqtt/>
+build_src_filter = ${nrf52_base.build_src_filter} +<../variants/rak2560> +<mesh/api/> +<mqtt/>
 lib_deps = 
  ${nrf52840_base.lib_deps}
  ${networking_base.lib_deps}
  melopero/Melopero RV3028@^1.1.0
-  https://github.com/RAKWireless/RAK13800-W5100S.git#1.0.2
-  rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
-  beegee-tokyo/RAKwireless RAK12034@^1.0.0
-  https://github.com/beegee-tokyo/RAK-OneWireSerial.git
+  https://github.com/beegee-tokyo/RAK-OneWireSerial/archive/0.0.2.zip
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ;upload_protocol = jlink
--- a/variants/rak2560/variant.h
+++ b/variants/rak2560/variant.h
@@ -250,8 +250,6 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG

 #define HAS_RTC 1

-#define HAS_ETHERNET 1
-
 #define RAK_4631 1

 #define HALF_UART_PIN PIN_SERIAL1_RX
@@ -265,9 +263,6 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
 #error pin 15 collision
 #endif

-#define PIN_ETHERNET_RESET 21
-#define PIN_ETHERNET_SS PIN_EINK_CS
-#define ETH_SPI_PORT SPI1
 #define AQ_SET_PIN 10

 #ifdef __cplusplus
--- a/variants/rak3172/platformio.ini
+++ b/variants/rak3172/platformio.ini
@@ -1,34 +1,23 @@
 [env:rak3172]
 extends = stm32_base
 board = wiscore_rak3172
+board_upload.maximum_size = 233472 ; reserve the last 28KB for filesystem
 build_flags =
  ${stm32_base.build_flags}
  -Ivariants/rak3172
-  -DSERIAL_UART_INSTANCE=1
-  -DPIN_SERIAL_RX=PB7
-  -DPIN_SERIAL_TX=PB6
  -DHAL_DAC_MODULE_ONLY
-  -DHAL_ADC_MODULE_DISABLED
-  -DHAL_COMP_MODULE_DISABLED
-  -DHAL_CRC_MODULE_DISABLED
-  -DHAL_CRYP_MODULE_DISABLED
-  -DHAL_GTZC_MODULE_DISABLED
-  -DHAL_HSEM_MODULE_DISABLED
-  -DHAL_I2C_MODULE_DISABLED
-  -DHAL_I2S_MODULE_DISABLED
-  -DHAL_IPCC_MODULE_DISABLED
-  -DHAL_IRDA_MODULE_DISABLED
-  -DHAL_IWDG_MODULE_DISABLED
-  -DHAL_LPTIM_MODULE_DISABLED
-  -DHAL_PKA_MODULE_DISABLED
-  -DHAL_RNG_MODULE_DISABLED
-  -DHAL_RTC_MODULE_DISABLED
-  -DHAL_SMARTCARD_MODULE_DISABLED
-  -DHAL_SMBUS_MODULE_DISABLED
-  -DHAL_TIM_MODULE_DISABLED
-  -DHAL_WWDG_MODULE_DISABLED
-  -DHAL_EXTI_MODULE_DISABLED
+  -DHAL_RNG_MODULE_ENABLED
  -DRADIOLIB_EXCLUDE_SX128X=1
  -DRADIOLIB_EXCLUDE_SX127X=1
  -DRADIOLIB_EXCLUDE_LR11X0=1
-upload_port = stlink
+  -DMESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR=1
+  -DMESHTASTIC_EXCLUDE_I2C=1
+  -DMESHTASTIC_EXCLUDE_WIFI=1
+  -DMESHTASTIC_EXCLUDE_BLUETOOTH=1
+  -DMESHTASTIC_EXCLUDE_GPS=1
+  -DMESHTASTIC_EXCLUDE_SCREEN=1
+  -DMESHTASTIC_EXCLUDE_MQTT=1
+  -DMESHTASTIC_EXCLUDE_POWERMON=1
+  ;-DPIO_FRAMEWORK_ARDUINO_NANOLIB_FLOAT_PRINTF
+  ;-DCFG_DEBUG
+upload_port = stlink
--- a/variants/rak3172/variant.h
+++ b/variants/rak3172/variant.h
@@ -1,3 +1,8 @@
+/*
+STM32WLE5 Core Module for LoRaWAN® RAK3372
+https://store.rakwireless.com/products/wisblock-core-module-rak3372
+*/
+
 /*
 This variant is a work in progress.
 Do not expect a working Meshtastic device with this target.
@@ -7,6 +12,8 @@ Do not expect a working Meshtastic device with this target.
 #define _VARIANT_RAK3172_

 #define USE_STM32WLx
-#define MAX_NUM_NODES 10

-#endif
+#define LED_PIN PA0 // Green LED
+#define LED_STATE_ON 1
+
+#endif
--- a/variants/rak4631/platformio.ini
+++ b/variants/rak4631/platformio.ini
@@ -17,9 +17,9 @@ lib_deps =
  ${nrf52840_base.lib_deps}
  ${networking_base.lib_deps}
  melopero/Melopero RV3028@^1.1.0
-  https://github.com/RAKWireless/RAK13800-W5100S.git#1.0.2
+  https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
  rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
-  https://github.com/RAKWireless/RAK12034-BMX160.git#dcead07ffa267d3c906e9ca4a1330ab989e957e2
+  https://github.com/RAKWireless/RAK12034-BMX160/archive/dcead07ffa267d3c906e9ca4a1330ab989e957e2.zip

 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ; Note: as of 6/2013 the serial/bootloader based programming takes approximately 30 seconds
@@ -41,7 +41,7 @@ build_flags =

 lib_deps =
  ${env:rak4631.lib_deps}
-  https://github.com/geeksville/Armduino-Semihosting.git#35b538fdf208c3530c1434cd099a08e486672ee4
+  https://github.com/geeksville/Armduino-Semihosting/archive/35b538fdf208c3530c1434cd099a08e486672ee4.zip

 ; NOTE: the pyocd support for semihosting is buggy.  So I switched to using the builtin platformio support for the stlink adapter which worked much better.
 ; However the built in openocd version in platformio has buggy support for TCP to semihosting. 
--- a/variants/rak4631_epaper/platformio.ini
+++ b/variants/rak4631_epaper/platformio.ini
@@ -13,10 +13,10 @@ build_flags = ${nrf52840_base.build_flags} -Ivariants/rak4631_epaper -D RAK_4631
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/rak4631_epaper>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  zinggjm/GxEPD2@^1.4.9
+  zinggjm/GxEPD2@^1.6.2
  melopero/Melopero RV3028@^1.1.0
  rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
  beegee-tokyo/RAKwireless RAK12034@^1.0.0
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
-;upload_protocol = jlink
+;upload_protocol = jlink
--- a/variants/rak4631_epaper_onrxtx/platformio.ini
+++ b/variants/rak4631_epaper_onrxtx/platformio.ini
@@ -15,11 +15,11 @@ build_flags = ${nrf52840_base.build_flags} -Ivariants/rak4631_epaper -D RAK_4631
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/rak4631_epaper_onrxtx>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  zinggjm/GxEPD2@^1.5.1
+  zinggjm/GxEPD2@^1.6.2
  melopero/Melopero RV3028@^1.1.0
  rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
  beegee-tokyo/RAKwireless RAK12034@^1.0.0
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ;upload_protocol = jlink
-;upload_port = /dev/ttyACM3
+;upload_port = /dev/ttyACM3
--- a/variants/rak4631_eth_gw/platformio.ini
+++ b/variants/rak4631_eth_gw/platformio.ini
@@ -10,7 +10,6 @@ build_flags = ${nrf52840_base.build_flags} -Ivariants/rak4631_eth_gw -D RAK_4631
  -DEINK_WIDTH=250
  -DEINK_HEIGHT=122
  -DNRF52_USE_JSON=1
-  -DMESHTASTIC_EXCLUDE_GPS=1
  -DMESHTASTIC_EXCLUDE_WIFI=1
  -DMESHTASTIC_EXCLUDE_SCREEN=1
 ;   -DMESHTASTIC_EXCLUDE_PKI=1
@@ -28,9 +27,9 @@ lib_deps =
  ${nrf52840_base.lib_deps}
  ${networking_base.lib_deps}
  melopero/Melopero RV3028@^1.1.0
-  https://github.com/RAKWireless/RAK13800-W5100S.git#1.0.2
+  https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
  rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
-  https://github.com/meshtastic/RAK12034-BMX160.git#4821355fb10390ba8557dc43ca29a023bcfbb9d9
+  https://github.com/meshtastic/RAK12034-BMX160/archive/4821355fb10390ba8557dc43ca29a023bcfbb9d9.zip
  bblanchon/ArduinoJson @ 6.21.4
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ; Note: as of 6/2013 the serial/bootloader based programming takes approximately 30 seconds
@@ -52,7 +51,7 @@ build_flags =

 lib_deps =
  ${env:rak4631_eth_gw.lib_deps}
-  https://github.com/geeksville/Armduino-Semihosting.git#35b538fdf208c3530c1434cd099a08e486672ee4
+  https://github.com/geeksville/Armduino-Semihosting/archive/35b538fdf208c3530c1434cd099a08e486672ee4.zip

 ; NOTE: the pyocd support for semihosting is buggy.  So I switched to using the builtin platformio support for the stlink adapter which worked much better.
 ; However the built in openocd version in platformio has buggy support for TCP to semihosting. 
@@ -63,4 +62,4 @@ lib_deps =
 upload_protocol = stlink
 ; eventually use platformio/tool-pyocd@^2.3600.0 instad
 ;upload_protocol = custom
-;upload_command = pyocd flash -t nrf52840 $UPLOADERFLAGS $SOURCE
+;upload_command = pyocd flash -t nrf52840 $UPLOADERFLAGS $SOURCE
--- a/variants/rak_wismeshtap/platformio.ini
+++ b/variants/rak_wismeshtap/platformio.ini
@@ -18,7 +18,7 @@ lib_deps =
  ${nrf52840_base.lib_deps}
  ${networking_base.lib_deps}
  melopero/Melopero RV3028@^1.1.0
-  https://github.com/RAKWireless/RAK13800-W5100S.git#1.0.2
+  https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
  rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
  bodmer/TFT_eSPI
  beegee-tokyo/RAKwireless RAK12034@^1.0.0
--- a/variants/rpipico2/platformio.ini
+++ b/variants/rpipico2/platformio.ini
@@ -9,7 +9,7 @@ build_flags = ${rp2350_base.build_flags}
  -Ivariants/rpipico2
  -DDEBUG_RP2040_PORT=Serial
  -DHW_SPI1_DEVICE
-  -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m0plus"
+  -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m33"
 lib_deps =
  ${rp2350_base.lib_deps}
 debug_build_flags = ${rp2350_base.build_flags}, -g
--- a/variants/rpipico2w/platformio.ini
+++ b/variants/rpipico2w/platformio.ini
@@ -0,0 +1,31 @@
+[env:pico2w]
+extends = rp2350_base
+board = rpipico2w
+upload_protocol = jlink
+# debug settings for external openocd with RP2040 support (custom build)
+debug_tool = custom
+debug_init_cmds =
+  target extended-remote localhost:3333
+  $INIT_BREAK
+  monitor reset halt
+  $LOAD_CMDS
+  monitor init
+  monitor reset halt
+
+# add our variants files to the include and src paths
+build_flags = ${rp2350_base.build_flags} 
+  -DRPI_PICO2
+  -Ivariants/rpipico2w
+#  -DDEBUG_RP2040_PORT=Serial
+  -DHW_SPI1_DEVICE
+  -DARDUINO_RASPBERRY_PI_PICO_2W
+  -DARDUINO_ARCH_RP2040
+  -DHAS_WIFI=1
+  -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m33"
+  -fexceptions  # for exception handling in MQTT
+  -DHAS_UDP_MULTICAST=1
+build_src_filter = ${rp2350_base.build_src_filter} +<mesh/wifi/>
+lib_deps =
+  ${rp2350_base.lib_deps}
+  ${networking_base.lib_deps}
+debug_build_flags = ${rp2350_base.build_flags}, -g
--- a/variants/rpipico2w/variant.h
+++ b/variants/rpipico2w/variant.h
@@ -0,0 +1,52 @@
+// #define RADIOLIB_CUSTOM_ARDUINO 1
+// #define RADIOLIB_TONE_UNSUPPORTED 1
+// #define RADIOLIB_SOFTWARE_SERIAL_UNSUPPORTED 1
+
+#define ARDUINO_ARCH_AVR
+
+#ifndef HAS_WIFI
+#define HAS_WIFI 1
+#endif
+
+// default I2C pins:
+// SDA = 4
+// SCL = 5
+
+// Recommended pins for SerialModule:
+// txd = 8
+// rxd = 9
+
+#define EXT_NOTIFY_OUT 22
+#define BUTTON_PIN 17
+
+#define BATTERY_PIN 26
+// ratio of voltage divider = 3.0 (R17=200k, R18=100k)
+#define ADC_MULTIPLIER 3.1 // 3.0 + a bit for being optimistic
+#define BATTERY_SENSE_RESOLUTION_BITS ADC_RESOLUTION
+
+#define USE_SX1262
+
+#undef LORA_SCK
+#undef LORA_MISO
+#undef LORA_MOSI
+#undef LORA_CS
+
+#define LORA_SCK 10
+#define LORA_MISO 12
+#define LORA_MOSI 11
+#define LORA_CS 3
+
+#define LORA_DIO0 RADIOLIB_NC
+#define LORA_RESET 15
+#define LORA_DIO1 20
+#define LORA_DIO2 2
+#define LORA_DIO3 RADIOLIB_NC
+
+#ifdef USE_SX1262
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_DIO2
+#define SX126X_RESET LORA_RESET
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+#endif
--- a/variants/rpipicow/platformio.ini
+++ b/variants/rpipicow/platformio.ini
@@ -10,9 +10,10 @@ build_flags = ${rp2040_base.build_flags}
  -DHW_SPI1_DEVICE
  -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m0plus"
  -fexceptions  # for exception handling in MQTT
+  -DHAS_UDP_MULTICAST=1
 build_src_filter = ${rp2040_base.build_src_filter} +<mesh/wifi/>
 lib_deps =
  ${rp2040_base.lib_deps}
  ${networking_base.lib_deps}
 debug_build_flags = ${rp2040_base.build_flags}, -g
-debug_tool = cmsis-dap ; for e.g. Picotool
+debug_tool = cmsis-dap ; for e.g. Picotool
--- a/variants/seeed-sensecap-indicator/platformio.ini
+++ b/variants/seeed-sensecap-indicator/platformio.ini
@@ -2,10 +2,11 @@
 [env:seeed-sensecap-indicator]
 extends = esp32s3_base
 platform_packages =
-    platformio/framework-arduinoespressif32 @ https://github.com/mverch67/arduino-esp32.git#aef7fef6de3329ed6f75512d46d63bba12b09bb5 ; add_tca9535 (based on 2.0.16)
+    platformio/framework-arduinoespressif32 @ https://github.com/mverch67/arduino-esp32/archive/aef7fef6de3329ed6f75512d46d63bba12b09bb5.zip ; add_tca9535 (based on 2.0.16)

 board = seeed-sensecap-indicator
 board_check = true
+board_build.partitions = default_8MB.csv
 upload_protocol = esptool

 build_flags = ${esp32_base.build_flags}
@@ -23,6 +24,50 @@ build_flags = ${esp32_base.build_flags}
  -DUSE_ARDUINO_HAL_GPIO

 lib_deps = ${esp32s3_base.lib_deps}
-  https://github.com/mverch67/LovyanGFX#develop
-  earlephilhower/ESP8266Audio@^1.9.7
-  earlephilhower/ESP8266SAM@^1.0.1
+  https://github.com/mverch67/LovyanGFX/archive/4c76238c1344162a234ae917b27651af146d6fb2.zip
+  earlephilhower/ESP8266Audio@^1.9.9
+  earlephilhower/ESP8266SAM@^1.0.1
+
+
+[env:seeed-sensecap-indicator-tft]
+extends = env:seeed-sensecap-indicator
+board_level = main
+upload_speed = 460800
+
+build_flags =
+  ${env:seeed-sensecap-indicator.build_flags}
+  -D MESHTASTIC_EXCLUDE_CANNEDMESSAGES=1
+  -D MESHTASTIC_EXCLUDE_INPUTBROKER=1
+  -D MESHTASTIC_EXCLUDE_SCREEN=1
+  -D MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR=1
+  -D MESHTASTIC_EXCLUDE_WEBSERVER=1
+  -D MESHTASTIC_EXCLUDE_SERIAL=1
+  -D MESHTASTIC_EXCLUDE_SOCKETAPI=1
+  -D INPUTDRIVER_BUTTON_TYPE=38
+  -D HAS_TELEMETRY=0
+  -D CONFIG_DISABLE_HAL_LOCKS=1
+  -D HAS_SCREEN=0
+  -D HAS_TFT=1
+  -D DISPLAY_SET_RESOLUTION
+  -D USE_PIN_BUZZER
+  -D RAM_SIZE=4096
+	-D LV_LVGL_H_INCLUDE_SIMPLE
+	-D LV_CONF_INCLUDE_SIMPLE
+	-D LV_COMP_CONF_INCLUDE_SIMPLE
+  -D LV_USE_SYSMON=0
+  -D LV_USE_PROFILER=0
+  -D LV_USE_PERF_MONITOR=0
+  -D LV_USE_MEM_MONITOR=0
+  -D LV_USE_LOG=0
+  -D USE_LOG_DEBUG
+  -D LOG_DEBUG_INC=\"DebugConfiguration.h\"
+  -D CUSTOM_TOUCH_DRIVER
+  -D LGFX_DRIVER=LGFX_INDICATOR
+  -D GFX_DRIVER_INC=\"graphics/LGFX/LGFX_INDICATOR.h\"
+  -D VIEW_320x240
+  -D USE_PACKET_API
+
+lib_deps =
+  ${env:seeed-sensecap-indicator.lib_deps}
+  ${device-ui_base.lib_deps}
+  https://github.com/mverch67/bb_captouch/archive/8626412fe650d808a267791c0eae6e5860c85a5d.zip ; alternative touch library supporting FT6x36
--- a/variants/seeed-sensecap-indicator/variant.h
+++ b/variants/seeed-sensecap-indicator/variant.h
@@ -1,7 +1,15 @@
 #define I2C_SDA 39
 #define I2C_SCL 40

+// This board has a serial coprocessor for sensor readings
+#define SENSOR_RP2040_TXD 19
+#define SENSOR_RP2040_RXD 20
+#define SENSOR_PORT_NUM 2
+#define SENSOR_BAUD_RATE 115200
+
+#if !HAS_TFT
 #define BUTTON_PIN 38
+#endif
 // #define BUTTON_NEED_PULLUP

 // #define BATTERY_PIN 27 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
@@ -19,8 +27,7 @@
 #define ST7701_BL 45
 #define ST7701_SPI_HOST SPI2_HOST
 #define ST7701_BACKLIGHT_EN 45
-#define SPI_FREQUENCY 20000000
-#define SPI_READ_FREQUENCY 16000000
+#define SPI_FREQUENCY 12000000
 #define TFT_HEIGHT 480
 #define TFT_WIDTH 480
 #define TFT_OFFSET_X 0
@@ -65,5 +72,8 @@
 #define SX126X_RESET LORA_RESET
 #define SX126X_DIO2_AS_RF_SWITCH

+#define TCXO_OPTIONAL // handle Indicator V1 and V2
+#define SX126X_DIO3_TCXO_VOLTAGE 2.4
+
 #define USE_VIRTUAL_KEYBOARD 1
 #define DISPLAY_CLOCK_FRAME 1
--- a/variants/seeed_xiao_nrf52840_kit/platformio.ini
+++ b/variants/seeed_xiao_nrf52840_kit/platformio.ini
@@ -0,0 +1,13 @@
+; Seeed Xiao BLE: https://www.digikey.com/en/products/detail/seeed-technology-co-ltd/102010448/16652893
+[env:seeed_xiao_nrf52840_kit]
+extends = nrf52840_base
+board = xiao_ble_sense
+build_flags = ${nrf52840_base.build_flags} -Ivariants/seeed_xiao_nrf52840_kit -Isrc/platform/nrf52/softdevice -Isrc/platform/nrf52/softdevice/nrf52  -DSEEED_XIAO_NRF52840_KIT
+  -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard"
+board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
+build_src_filter = ${nrf52_base.build_src_filter} +<../variants/seeed_xiao_nrf52840_kit>
+lib_deps = 
+  ${nrf52840_base.lib_deps}
+debug_tool = jlink
+; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
+;upload_protocol = jlink
--- a/variants/seeed_xiao_nrf52840_kit/variant.cpp
+++ b/variants/seeed_xiao_nrf52840_kit/variant.cpp
@@ -0,0 +1,92 @@
+#include "variant.h"
+#include "configuration.h"
+#include "nrf.h"
+#include "wiring_constants.h"
+#include "wiring_digital.h"
+#include <map>
+#include <memory>
+#include <stddef.h>
+#include <stdint.h>
+const uint32_t g_ADigitalPinMap[] = {
+    // D0 .. D13
+    2,  // D0  is P0.02 (A0)
+    3,  // D1  is P0.03 (A1)
+    28, // D2  is P0.28 (A2)
+    29, // D3  is P0.29 (A3)
+    4,  // D4  is P0.04 (A4,SDA)
+    5,  // D5  is P0.05 (A5,SCL)
+    43, // D6  is P1.11 (TX)
+    44, // D7  is P1.12 (RX)
+    45, // D8  is P1.13 (SCK)
+    46, // D9  is P1.14 (MISO)
+    47, // D10 is P1.15 (MOSI)
+
+    // LEDs
+    26, // D11 is P0.26 (LED RED)
+    6,  // D12 is P0.06 (LED BLUE)
+    30, // D13 is P0.30 (LED GREEN)
+    14, // D14 is P0.14 (READ_BAT)
+
+    // LSM6DS3TR
+    40, // D15 is P1.08 (6D_PWR)
+    27, // D16 is P0.27 (6D_I2C_SCL)
+    7,  // D17 is P0.07 (6D_I2C_SDA)
+    11, // D18 is P0.11 (6D_INT1)
+
+    // MIC
+    42, // 17,//42,  // D19 is P1.10 (MIC_PWR)
+    32, // 26,//32,  // D20 is P1.00 (PDM_CLK)
+    16, // 25,//16,  // D21 is P0.16 (PDM_DATA)
+
+    // BQ25100
+    13, // D22 is P0.13 (HICHG)
+    17, // D23 is P0.17 (~CHG)
+
+    //
+    21, // D24 is P0.21 (QSPI_SCK)
+    25, // D25 is P0.25 (QSPI_CSN)
+    20, // D26 is P0.20 (QSPI_SIO_0 DI)
+    24, // D27 is P0.24 (QSPI_SIO_1 DO)
+    22, // D28 is P0.22 (QSPI_SIO_2 WP)
+    23, // D29 is P0.23 (QSPI_SIO_3 HOLD)
+
+    // NFC
+    9,  // D30 is P0.09 (NFC1)
+    10, // D31 is P0.10 (NFC2)
+
+    // VBAT
+    31, // D32 is P0.10 (VBAT)
+};
+
+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  Copyright (c) 2016 Sandeep Mistry All right reserved.
+  Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+void initVariant()
+{
+    // LED1 & LED2
+    pinMode(21, OUTPUT);
+    digitalWrite(21, LOW);
+    // LED1 & LED2
+    pinMode(22, OUTPUT);
+    digitalWrite(22, LOW);
+
+    pinMode(PIN_WIRE_SDA, INPUT_PULLUP);
+    pinMode(PIN_WIRE_SCL, INPUT_PULLUP);
+}
--- a/variants/seeed_xiao_nrf52840_kit/variant.h
+++ b/variants/seeed_xiao_nrf52840_kit/variant.h
@@ -0,0 +1,170 @@
+#ifndef _SEEED_XIAO_NRF52840_SENSE_H_
+#define _SEEED_XIAO_NRF52840_SENSE_H_
+
+/** Master clock frequency */
+#define VARIANT_MCK (64000000ul)
+
+#define USE_LFXO // Board uses 32khz crystal for LF
+// #define USE_LFRC    // Board uses RC for LF
+
+/*----------------------------------------------------------------------------
+ *        Headers
+ *----------------------------------------------------------------------------*/
+
+#include "WVariant.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif // __cplusplus
+
+#define PINS_COUNT (33)
+#define NUM_DIGITAL_PINS (33)
+#define NUM_ANALOG_INPUTS (8) // A6 is used for battery, A7 is analog reference
+#define NUM_ANALOG_OUTPUTS (0)
+
+// LEDs
+
+#define LED_RED 11
+#define LED_BLUE 12
+#define LED_GREEN 13
+
+#define PIN_LED1 LED_GREEN
+#define PIN_LED2 LED_BLUE
+#define PIN_LED3 LED_RED
+
+#define PIN_LED PIN_LED1
+#define LED_PWR (PINS_COUNT)
+
+#define LED_BUILTIN PIN_LED
+
+#define LED_STATE_ON 1 // State when LED is lit
+
+/*
+ * Buttons
+ */
+
+// Digital PINs
+#define D0 (0ul)
+#define D1 (1ul)
+#define D2 (2ul)
+#define D3 (3ul)
+#define D4 (4ul)
+#define D5 (5ul)
+#define D6 (6ul)
+#define D7 (7ul)
+#define D8 (8ul)
+#define D9 (9ul)
+#define D10 (10ul)
+
+/*Due to the lack of pins,and have to make sure gps standby work well we have temporarily removed the button.
+There are some technical solutions that can solve this problem,
+and we are currently exploring and researching them*/
+
+// #define BUTTON_PIN D0 // This is the Program Button
+// // #define BUTTON_NEED_PULLUP   1
+// #define BUTTON_ACTIVE_LOW true
+// #define BUTTON_ACTIVE_PULLUP false
+
+/*
+ * Analog pins
+ */
+#define PIN_A0 (0)
+#define PIN_A1 (1)
+#define PIN_A2 (32)
+#define PIN_A3 (3)
+#define PIN_A4 (4)
+#define PIN_A5 (5)
+#define PIN_VBAT (32)
+#define VBAT_ENABLE (14)
+
+static const uint8_t A0 = PIN_A0;
+static const uint8_t A1 = PIN_A1;
+static const uint8_t A2 = PIN_A2;
+static const uint8_t A3 = PIN_A3;
+static const uint8_t A4 = PIN_A4;
+static const uint8_t A5 = PIN_A5;
+#define ADC_RESOLUTION 12
+
+#define PIN_SERIAL2_RX (-1)
+#define PIN_SERIAL2_TX (-1)
+
+/*
+ * SPI Interfaces
+ */
+#define SPI_INTERFACES_COUNT 1
+
+#define PIN_SPI_MISO (9)
+#define PIN_SPI_MOSI (10)
+#define PIN_SPI_SCK (8)
+
+static const uint8_t SS = D4;
+static const uint8_t MOSI = PIN_SPI_MOSI;
+static const uint8_t MISO = PIN_SPI_MISO;
+static const uint8_t SCK = PIN_SPI_SCK;
+
+// supported modules list
+#define USE_SX1262
+
+// common pinouts for SX126X modules
+
+#define SX126X_CS D4
+#define SX126X_DIO1 D1
+#define SX126X_BUSY D3
+#define SX126X_RESET D2
+
+#define SX126X_TXEN RADIOLIB_NC
+
+#define SX126X_RXEN D4
+#define SX126X_DIO2_AS_RF_SWITCH // DIO2 is used to control the RF switch really necessary!!!
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+
+/*
+ * Wire Interfaces
+ */
+
+#define I2C_NO_RESCAN           // I2C is a bit finicky, don't scan too much
+#define WIRE_INTERFACES_COUNT 1 // 2
+
+#define PIN_WIRE_SDA (24) // change to use the correct pins if needed
+#define PIN_WIRE_SCL (25) // change to use the correct pins if needed
+
+static const uint8_t SDA = PIN_WIRE_SDA;
+static const uint8_t SCL = PIN_WIRE_SCL;
+
+// GPS L76KB
+#define GPS_L76K
+#ifdef GPS_L76K
+#define PIN_GPS_RX D6
+#define PIN_GPS_TX D7
+#define HAS_GPS 1
+#define GPS_BAUDRATE 9600
+#define GPS_THREAD_INTERVAL 50
+#define PIN_SERIAL1_RX PIN_GPS_TX
+#define PIN_SERIAL1_TX PIN_GPS_RX
+#define PIN_GPS_STANDBY D0
+#endif
+
+// Battery
+
+#define BAT_READ                                                                                                                 \
+    14 // P0_14 = 14  Reads battery voltage from divider on signal board. (PIN_VBAT is reading voltage divider on XIAO and is
+       // program pin 32 / or P0.31)
+#define BATTERY_SENSE_RESOLUTION_BITS 10
+#define CHARGE_LED 23 // P0_17 = 17  D23   YELLOW CHARGE LED
+#define HICHG 22      // P0_13 = 13  D22   Charge-select pin for Lipo for 100 mA instead of default 50mA charge
+
+// The battery sense is hooked to pin A0 (5)
+#define BATTERY_PIN PIN_VBAT // PIN_A0
+
+// ratio of voltage divider = 3.0 (R17=1M, R18=510k)
+#define ADC_MULTIPLIER 3 // 3.0 + a bit for being optimistic
+
+#ifdef __cplusplus
+}
+#endif
+
+/*----------------------------------------------------------------------------
+ *        Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#endif
--- a/variants/seeed_xiao_s3/platformio.ini
+++ b/variants/seeed_xiao_s3/platformio.ini
@@ -2,7 +2,7 @@
 extends = esp32s3_base
 board = seeed-xiao-s3
 board_check = true
-board_build.mcu = esp32s3
+board_build.partitions = default_8MB.csv
 upload_protocol = esptool
 upload_speed = 921600
 lib_deps =
--- a/variants/seeed_xiao_s3/variant.h
+++ b/variants/seeed_xiao_s3/variant.h
@@ -36,6 +36,10 @@ L76K GPS Module Information : https://www.seeedstudio.com/L76K-GNSS-Module-for-S
 #define BUTTON_PIN 21 // This is the Program Button
 #define BUTTON_NEED_PULLUP

+#define BATTERY_PIN -1
+#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
+#define BATTERY_SENSE_RESOLUTION_BITS 12
+
 /*Warning:
    https://www.seeedstudio.com/L76K-GNSS-Module-for-Seeed-Studio-XIAO-p-5864.html
    L76K Expansion Board can not directly used, L76K Reset Pin needs to override or physically remove it,
--- a/Show More
+++ b/Show More