Merge branch 'develop' into t-watch-ultra

variants/esp32/chatter2/platformio.ini

@@ -6,6 +6,8 @@ build_flags =
   ${esp32_base.build_flags}
   -D CHATTER_2
   -I variants/esp32/chatter2
+  -DMESHTASTIC_EXCLUDE_WEBSERVER=1
+  -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
   
 lib_deps =
   ${esp32_base.lib_deps}

variants/esp32/chatter2/variant.h

@@ -79,7 +79,7 @@
                            // lower dB for lower voltage rnage
 #define ADC_MULTIPLIER 5.0 // VBATT---10k--pin34---2.5K---GND
 // Chatter2 uses 3 AAA cells
-#define CELL_TYPE_ALKALINE
+#define OCV_ARRAY 1580, 1400, 1350, 1300, 1280, 1250, 1230, 1190, 1150, 1100, 1000
 #define NUM_CELLS 3
 #undef EXT_PWR_DETECT
 

variants/esp32/esp32-common.ini

@@ -59,13 +59,13 @@ lib_deps =
   ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
   # renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
-  https://github.com/meshtastic/esp32_https_server/archive/3223704846752e6d545139204837bdb2a55459ca.zip
+  https://github.com/meshtastic/esp32_https_server/archive/b0f3960b3e8444563280656d88e22b5899481884.zip
   # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
   h2zero/NimBLE-Arduino@^1.4.3
   # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
   https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
   # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
-  https://github.com/lewisxhe/XPowersLib/archive/v0.3.2.zip
+  https://github.com/lewisxhe/XPowersLib/archive/v0.3.3.zip
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
   rweather/Crypto@0.4.0
 

variants/esp32/esp32.ini

@@ -17,12 +17,12 @@ lib_deps =
   ${environmental_extra_no_bsec.lib_deps}
   ${radiolib_base.lib_deps}
   # renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
-  https://github.com/meshtastic/esp32_https_server/archive/3223704846752e6d545139204837bdb2a55459ca.zip
+  https://github.com/meshtastic/esp32_https_server/archive/b0f3960b3e8444563280656d88e22b5899481884.zip
   # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
   h2zero/NimBLE-Arduino@^1.4.3
   # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
   https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
   # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
-  https://github.com/lewisxhe/XPowersLib/archive/v0.3.2.zip
+  https://github.com/lewisxhe/XPowersLib/archive/v0.3.3.zip
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
   rweather/Crypto@0.4.0

variants/esp32/m5stack_core/platformio.ini

@@ -16,6 +16,8 @@ build_flags =
   ${esp32_base.build_flags}
   -I variants/esp32/m5stack_core
   -DM5STACK
+  -DMESHTASTIC_EXCLUDE_WEBSERVER=1
+  -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
   -DUSER_SETUP_LOADED
   -DTFT_SDA_READ
   -DTFT_DRIVER=0x9341

variants/esp32/m5stack_coreink/platformio.ini

@@ -19,9 +19,9 @@ build_flags =
 lib_deps = 
   ${esp32_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
   # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4
 lib_ignore =
   m5stack-coreink
 monitor_filters = esp32_exception_decoder

variants/esp32/tbeam/platformio.ini

@@ -32,4 +32,4 @@ lib_deps =
   # renovate: datasource=github-tags depName=meshtastic-st7796 packageName=meshtastic/st7796
   https://github.com/meshtastic/st7796/archive/1.0.5.zip
   # renovate: datasource=custom.pio depName=lewisxhe-SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4

variants/esp32c6/esp32c6.ini

@@ -28,7 +28,7 @@ lib_deps =
   ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
   # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
-  lewisxhe/XPowersLib@0.3.2
+  lewisxhe/XPowersLib@0.3.3
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto

variants/esp32s3/ELECROW-ThinkNode-M5/platformio.ini

@@ -11,6 +11,10 @@ custom_meshtastic_requires_dfu = false
 
 extends = esp32s3_base
 board = ESP32-S3-WROOM-1-N4
+build_src_filter =
+  ${esp32s3_base.build_src_filter}
+  +<../variants/esp32s3/ELECROW-ThinkNode-M5>
+
 build_flags =
   ${esp32s3_base.build_flags}
   -D ELECROW_ThinkNode_M5

variants/esp32s3/ELECROW-ThinkNode-M5/variant.cpp

@@ -0,0 +1,12 @@
+#include "variant.h"
+#include <PCA9557.h>
+
+PCA9557 io(0x18, &Wire);
+
+void earlyInitVariant()
+{
+    Wire.begin(48, 47);
+    io.pinMode(PCA_PIN_EINK_EN, OUTPUT);
+    io.pinMode(PCA_PIN_POWER_EN, OUTPUT);
+    io.digitalWrite(PCA_PIN_POWER_EN, HIGH);
+}

variants/esp32s3/ELECROW-ThinkNode-M5/variant.h

@@ -4,6 +4,8 @@
 #define UART_TX 43
 #define UART_RX 44
 
+#define HAS_PCA9557
+
 // LED
 // Both of these are on the GPIO expander
 #define PCA_LED_USER 1  // the Blue LED

variants/esp32s3/diy/my_esp32s3_diy_eink/platformio.ini

@@ -11,7 +11,7 @@ upload_speed = 921600
 lib_deps =
   ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
   # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
   adafruit/Adafruit NeoPixel@1.15.2
 build_unflags =

variants/esp32s3/esp32-s3-pico/platformio.ini

@@ -23,6 +23,6 @@ build_flags = ${esp32s3_base.build_flags}
 
 lib_deps = ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
   # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
   adafruit/Adafruit NeoPixel@1.15.2

variants/esp32s3/hackaday-communicator/platformio.ini

@@ -6,6 +6,10 @@ board_check = true
 board_build.partitions = default_16MB.csv
 upload_protocol = esptool
 
+build_src_filter =
+  ${esp32s3_base.build_src_filter}
+  +<../variants/esp32s3/hackaday-communicator>
+
 build_flags = ${esp32s3_base.build_flags} 
   -D HACKADAY_COMMUNICATOR
   -D BOARD_HAS_PSRAM
@@ -13,4 +17,4 @@ build_flags = ${esp32s3_base.build_flags}
 
 lib_deps = ${esp32s3_base.lib_deps}
   # renovate: datasource=git-refs depName=meshtastic-Arduino_GFX packageName=https://github.com/meshtastic/Arduino_GFX gitBranch=master
-  https://github.com/meshtastic/Arduino_GFX/archive/054e81ffaf23784830a734e3c184346789349406.zip
+  https://github.com/meshtastic/Arduino_GFX/archive/054e81ffaf23784830a734e3c184346789349406.zip

variants/esp32s3/hackaday-communicator/variant.cpp

@@ -0,0 +1,6 @@
+#include "variant.h"
+#include "Arduino.h"
+void earlyInitVariant()
+{
+    pinMode(KB_INT, INPUT);
+}

variants/esp32s3/t-deck-pro/platformio.ini

@@ -15,6 +15,10 @@ board = t-deck-pro
 board_check = true
 upload_protocol = esptool
 
+build_src_filter =
+  ${esp32s3_base.build_src_filter}
+  +<../variants/esp32s3/t-deck-pro>
+
 build_flags = 
   ${esp32s3_base.build_flags} -I variants/esp32s3/t-deck-pro
   -D T_DECK_PRO
@@ -29,7 +33,7 @@ build_flags =
 lib_deps =
   ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
   # renovate: datasource=git-refs depName=CSE_Touch packageName=https://github.com/CIRCUITSTATE/CSE_Touch gitBranch=main
   https://github.com/CIRCUITSTATE/CSE_Touch/archive/b44f23b6f870b848f1fbe453c190879bc6cfaafa.zip
   # renovate: datasource=github-tags depName=CSE_CST328 packageName=CIRCUITSTATE/CSE_CST328

variants/esp32s3/t-deck-pro/variant.cpp

@@ -0,0 +1,14 @@
+#include "variant.h"
+#include "Arduino.h"
+
+void earlyInitVariant()
+{
+    pinMode(LORA_EN, OUTPUT);
+    digitalWrite(LORA_EN, HIGH);
+    pinMode(LORA_CS, OUTPUT);
+    digitalWrite(LORA_CS, HIGH);
+    pinMode(SDCARD_CS, OUTPUT);
+    digitalWrite(SDCARD_CS, HIGH);
+    pinMode(PIN_EINK_CS, OUTPUT);
+    digitalWrite(PIN_EINK_CS, HIGH);
+}

variants/esp32s3/t-deck/platformio.ini

@@ -17,6 +17,10 @@ board_check = true
 board_build.partitions = default_16MB.csv
 upload_protocol = esptool
 
+build_src_filter =
+  ${esp32s3_base.build_src_filter}
+  +<../variants/esp32s3/t-deck>
+
 build_flags = ${esp32s3_base.build_flags} 
   -D T_DECK 
   -D BOARD_HAS_PSRAM

variants/esp32s3/t-deck/variant.cpp

@@ -0,0 +1,23 @@
+#include "variant.h"
+#include "Arduino.h"
+
+void earlyInitVariant()
+{
+    // GPIO10 manages all peripheral power supplies
+    // Turn on peripheral power immediately after MUC starts.
+    // If some boards are turned on late, ESP32 will reset due to low voltage.
+    // ESP32-C3(Keyboard) , MAX98357A(Audio Power Amplifier) ,
+    // TF Card , Display backlight(AW9364DNR) , AN48841B(Trackball) , ES7210(Decoder)
+    pinMode(KB_POWERON, OUTPUT);
+    digitalWrite(KB_POWERON, HIGH);
+    // T-Deck has all three SPI peripherals (TFT, SD, LoRa) attached to the same SPI bus
+    // We need to initialize all CS pins in advance otherwise there will be SPI communication issues
+    // e.g. when detecting the SD card
+    pinMode(LORA_CS, OUTPUT);
+    digitalWrite(LORA_CS, HIGH);
+    pinMode(SDCARD_CS, OUTPUT);
+    digitalWrite(SDCARD_CS, HIGH);
+    pinMode(TFT_CS, OUTPUT);
+    digitalWrite(TFT_CS, HIGH);
+    delay(100);
+}

variants/esp32s3/t-deck/variant.h

@@ -71,6 +71,7 @@
 #define TB_RIGHT 2
 #define TB_PRESS 0 // BUTTON_PIN
 #define TB_DIRECTION FALLING
+#define TB_THRESHOLD 3
 
 // microphone
 #define ES7210_SCK 47

variants/esp32s3/t-watch-s3/platformio.ini

@@ -24,7 +24,7 @@ lib_deps = ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
   lovyan03/LovyanGFX@1.2.7
   # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4
   # renovate: datasource=custom.pio depName=Adafruit DRV2605 packageName=adafruit/library/Adafruit DRV2605 Library
   adafruit/Adafruit DRV2605 Library@1.2.4
   # renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio

variants/esp32s3/tbeam-s3-core/platformio.ini

@@ -19,7 +19,7 @@ board_check = true
 lib_deps =
   ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4
 
 build_flags = 
   ${esp32s3_base.build_flags} 

variants/esp32s3/tlora-pager/platformio.ini

@@ -17,6 +17,10 @@ board_check = true
 board_build.partitions = default_16MB.csv
 upload_protocol = esptool
 
+build_src_filter =
+  ${esp32s3_base.build_src_filter}
+  +<../variants/esp32s3/tlora-pager>
+
 build_flags = ${esp32s3_base.build_flags} 
   -I variants/esp32s3/tlora-pager
   -D T_LORA_PAGER 
@@ -39,7 +43,7 @@ lib_deps = ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
   lewisxhe/PCF8563_Library@1.0.1
   # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4
   # renovate: datasource=github-tags depName=pschatzmann_arduino-audio-driver packageName=pschatzmann/arduino-audio-driver
   https://github.com/pschatzmann/arduino-audio-driver/archive/v0.2.0.zip
   # TODO renovate

variants/esp32s3/tlora-pager/variant.cpp

@@ -0,0 +1,31 @@
+#include "variant.h"
+#include "ExtensionIOXL9555.hpp"
+extern ExtensionIOXL9555 io;
+
+void earlyInitVariant()
+{
+    pinMode(LORA_CS, OUTPUT);
+    digitalWrite(LORA_CS, HIGH);
+    pinMode(SDCARD_CS, OUTPUT);
+    digitalWrite(SDCARD_CS, HIGH);
+    pinMode(TFT_CS, OUTPUT);
+    digitalWrite(TFT_CS, HIGH);
+    pinMode(KB_INT, INPUT_PULLUP);
+    // io expander
+    io.begin(Wire, XL9555_SLAVE_ADDRESS0, SDA, SCL);
+    io.pinMode(EXPANDS_DRV_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_DRV_EN, HIGH);
+    io.pinMode(EXPANDS_AMP_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_AMP_EN, LOW);
+    io.pinMode(EXPANDS_LORA_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_LORA_EN, HIGH);
+    io.pinMode(EXPANDS_GPS_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_GPS_EN, HIGH);
+    io.pinMode(EXPANDS_KB_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_KB_EN, HIGH);
+    io.pinMode(EXPANDS_SD_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_SD_EN, HIGH);
+    io.pinMode(EXPANDS_GPIO_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_GPIO_EN, HIGH);
+    io.pinMode(EXPANDS_SD_PULLEN, INPUT);
+}

variants/nrf52840/Dongle_nRF52840-pca10059-v1/platformio.ini

@@ -12,5 +12,5 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/Dongle_
 lib_deps = 
   ${nrf52840_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
 debug_tool = jlink

variants/nrf52840/ELECROW-ThinkNode-M1/variant.cpp

@@ -42,3 +42,21 @@ void initVariant()
     pinMode(PIN_LED3, OUTPUT);
     ledOff(PIN_LED3);
 }
+
+void variant_shutdown()
+{
+    for (int pin = 0; pin < 48; pin++) {
+        if (pin == SX126X_BUSY || pin == PIN_SPI_SCK || pin == SX126X_DIO1 || pin == PIN_SPI_MOSI || pin == PIN_SPI_MISO ||
+            pin == SX126X_CS || pin == SX126X_RESET || pin == PIN_NFC1 || pin == PIN_NFC2 || pin == PIN_BUTTON1 ||
+            pin == PIN_BUTTON2) {
+            continue;
+        }
+        pinMode(pin, OUTPUT);
+        digitalWrite(pin, LOW);
+        if (pin >= 32) {
+            NRF_P1->DIRCLR = (1 << (pin - 32));
+        } else {
+            NRF_GPIO->DIRCLR = (1 << pin);
+        }
+    }
+}

variants/nrf52840/ELECROW-ThinkNode-M3/platformio.ini

@@ -25,4 +25,4 @@ lib_deps =
   # renovate: datasource=custom.pio depName=nRF52_PWM packageName=khoih-prog/library/nRF52_PWM
   khoih-prog/nRF52_PWM@1.0.1
   ; # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  ; lewisxhe/SensorLib@0.3.3
+  ; lewisxhe/SensorLib@0.3.4

variants/nrf52840/ELECROW-ThinkNode-M6/platformio.ini

@@ -22,4 +22,4 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ELECROW
 lib_deps =
   ${nrf52840_base.lib_deps}
   ; # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  ; lewisxhe/SensorLib@0.3.3
+  ; lewisxhe/SensorLib@0.3.4

variants/nrf52840/ELECROW-ThinkNode-M6/variant.cpp

@@ -67,4 +67,8 @@ void variant_shutdown()
     nrf_gpio_cfg_input(PIN_BUTTON1, NRF_GPIO_PIN_PULLUP); // Configure the pin to be woken up as an input
     nrf_gpio_pin_sense_t sense1 = NRF_GPIO_PIN_SENSE_LOW;
     nrf_gpio_cfg_sense_set(PIN_BUTTON1, sense1);
+
+    nrf_gpio_cfg_input(EXT_CHRG_DETECT, NRF_GPIO_PIN_PULLUP); // Configure the pin to be woken up as an input
+    nrf_gpio_pin_sense_t sense2 = NRF_GPIO_PIN_SENSE_LOW;
+    nrf_gpio_cfg_sense_set(EXT_CHRG_DETECT, sense2);
 }

variants/nrf52840/ME25LS01-4Y10TD_e-ink/platformio.ini

@@ -16,7 +16,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ME25LS0
 lib_deps = 
   ${nrf52840_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 upload_protocol = nrfutil
 ;upload_port = /dev/ttyACM1

variants/nrf52840/MakePython_nRF52840_eink/platformio.ini

@@ -15,6 +15,6 @@ lib_deps =
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
 debug_tool = jlink
 ;upload_port = /dev/ttyACM4

variants/nrf52840/TWC_mesh_v4/platformio.ini

@@ -9,5 +9,5 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/TWC_mes
 lib_deps = 
   ${nrf52840_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
 debug_tool = jlink

variants/nrf52840/dls_Minimesh_Lite/platformio.ini

@@ -0,0 +1,9 @@
+[env:minimesh_lite]
+extends = nrf52840_base
+board = minimesh_lite
+board_level = extra
+build_flags = ${nrf52840_base.build_flags}
+  -Ivariants/nrf52840/dls_Minimesh_Lite
+  -DPRIVATE_HW
+build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/dls_Minimesh_Lite>
+debug_tool = jlink

variants/nrf52840/dls_Minimesh_Lite/variant.cpp

@@ -0,0 +1,38 @@
+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  Copyright (c) 2016 Sandeep Mistry All right reserved.
+  Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#include "variant.h"
+#include "nrf.h"
+#include "wiring_constants.h"
+#include "wiring_digital.h"
+
+const uint32_t g_ADigitalPinMap[] = {
+    // P0
+    0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+
+    // P1
+    32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
+
+void initVariant()
+{
+    // 3V3 Power Rail
+    pinMode(PIN_3V3_EN, OUTPUT);
+    digitalWrite(PIN_3V3_EN, HIGH);
+}

variants/nrf52840/dls_Minimesh_Lite/variant.h

@@ -0,0 +1,104 @@
+#ifndef _VARIANT_MINIMESH_LITE_
+#define _VARIANT_MINIMESH_LITE_
+
+#define VARIANT_MCK (64000000ul)
+#define USE_LFRC
+
+#include "WVariant.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define MINIMESH_LITE
+
+// Number of pins defined in PinDescription array
+#define PINS_COUNT (48)
+#define NUM_DIGITAL_PINS (48)
+#define NUM_ANALOG_INPUTS (1)
+#define NUM_ANALOG_OUTPUTS (0)
+
+#define PIN_3V3_EN (0 + 13) // P0.13
+
+// Analog pins
+#define BATTERY_PIN (0 + 31) // P0.31 Battery ADC
+#define ADC_CHANNEL ADC1_GPIO4_CHANNEL
+#define ADC_RESOLUTION 14
+#define BATTERY_SENSE_RESOLUTION_BITS 12
+#define BATTERY_SENSE_RESOLUTION 4096.0
+#define VBAT_MV_PER_LSB (0.73242188F)
+#define VBAT_DIVIDER (0.6F)
+#define VBAT_DIVIDER_COMP (1.73)
+#define REAL_VBAT_MV_PER_LSB (VBAT_DIVIDER_COMP * VBAT_MV_PER_LSB)
+#undef AREF_VOLTAGE
+#define AREF_VOLTAGE 3.0
+#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
+#define ADC_MULTIPLIER VBAT_DIVIDER_COMP
+#define VBAT_RAW_TO_SCALED(x) (REAL_VBAT_MV_PER_LSB * x)
+
+// WIRE IC AND IIC PINS
+#define WIRE_INTERFACES_COUNT 1
+
+#define PIN_WIRE_SDA (32 + 4)
+#define PIN_WIRE_SCL (0 + 11)
+
+// LED
+#define PIN_LED1 (0 + 15)
+#define LED_BUILTIN PIN_LED1
+// Actually red
+#define LED_BLUE PIN_LED1
+#define LED_STATE_ON 1
+
+// Button
+#define BUTTON_PIN (32 + 0)
+
+// GPS
+#define GPS_TX_PIN (0 + 20)
+#define GPS_RX_PIN (0 + 22)
+
+#define PIN_GPS_EN (0 + 24)
+#define GPS_UBLOX
+// define GPS_DEBUG
+
+// UART interfaces
+#define PIN_SERIAL1_TX GPS_TX_PIN
+#define PIN_SERIAL1_RX GPS_RX_PIN
+
+#define PIN_SERIAL2_RX (0 + 6)
+#define PIN_SERIAL2_TX (0 + 8)
+
+// Serial interfaces
+#define SPI_INTERFACES_COUNT 1
+
+#define PIN_SPI_MISO (0 + 2)
+#define PIN_SPI_MOSI (32 + 15)
+#define PIN_SPI_SCK (32 + 11)
+
+#define LORA_MISO PIN_SPI_MISO
+#define LORA_MOSI PIN_SPI_MOSI
+#define LORA_SCK PIN_SPI_SCK
+#define LORA_CS (32 + 13)
+
+// LORA MODULES
+#define USE_LLCC68
+#define USE_SX1262
+#define USE_SX1268
+
+// SX126X CONFIG
+#define SX126X_CS (32 + 13)
+#define SX126X_DIO1 (0 + 10)
+#define SX126X_DIO2_AS_RF_SWITCH
+
+#define SX126X_BUSY (0 + 29)
+#define SX126X_RESET (0 + 9)
+#define SX126X_RXEN (0 + 17)
+#define SX126X_TXEN RADIOLIB_NC
+
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+#define TCXO_OPTIONAL // make it so that the firmware can try both TCXO and XTAL
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // _VARIANT_MINIMESH_LITE_

variants/nrf52840/heltec_mesh_node_t114-inkhud/variant.cpp

@@ -19,6 +19,7 @@
 */
 
 #include "variant.h"
+#include "Arduino.h"
 #include "nrf.h"
 #include "wiring_constants.h"
 #include "wiring_digital.h"
@@ -36,3 +37,10 @@ void initVariant()
     pinMode(PIN_LED1, OUTPUT);
     ledOff(PIN_LED1);
 }
+
+void variant_shutdown()
+{
+    nrf_gpio_cfg_default(PIN_GPS_PPS);
+    detachInterrupt(PIN_GPS_PPS);
+    detachInterrupt(PIN_BUTTON1);
+}

variants/nrf52840/heltec_mesh_node_t114/variant.cpp

@@ -19,6 +19,7 @@
 */
 
 #include "variant.h"
+#include "Arduino.h"
 #include "nrf.h"
 #include "wiring_constants.h"
 #include "wiring_digital.h"
@@ -36,3 +37,10 @@ void initVariant()
     pinMode(PIN_LED1, OUTPUT);
     ledOff(PIN_LED1);
 }
+
+void variant_shutdown()
+{
+    nrf_gpio_cfg_default(PIN_GPS_PPS);
+    detachInterrupt(PIN_GPS_PPS);
+    detachInterrupt(PIN_BUTTON1);
+}

variants/nrf52840/heltec_mesh_node_t114/variant.h

@@ -156,7 +156,7 @@ No longer populated on PCB
 
 // The bluetooth transmit power on the nRF52840 is adjustable from -20dB to +8dB in steps of 4dB
 // so NRF52_BLE_TX_POWER can be set to -20, -16, -12, -8, -4, 0 (default), 4, and 8.
-//#define NRF52_BLE_TX_POWER 8
+// #define NRF52_BLE_TX_POWER 8
 
 /*
  * GPS pins

variants/nrf52840/heltec_mesh_solar/variant.cpp

@@ -19,6 +19,7 @@
 */
 
 #include "variant.h"
+#include "Arduino.h"
 #include "nrf.h"
 #include "wiring_constants.h"
 #include "wiring_digital.h"
@@ -38,3 +39,10 @@ void initVariant()
     digitalWrite(PIN_SCREEN_VDD_CTL, LOW); // Start with power on
 #endif
 }
+
+void variant_shutdown()
+{
+    nrf_gpio_cfg_default(PIN_GPS_PPS);
+    detachInterrupt(PIN_GPS_PPS);
+    detachInterrupt(PIN_BUTTON1);
+}

variants/nrf52840/meshlink/variant.cpp

@@ -20,4 +20,11 @@ void initVariant()
     pinMode(PIN_WD_EN, OUTPUT);
     digitalWrite(PIN_WD_EN, HIGH); // Enable the Watchdog at boot
 #endif
+}
+
+void variant_shutdown()
+{
+#ifdef PIN_WD_EN
+    digitalWrite(PIN_WD_EN, LOW);
+#endif
 }

variants/nrf52840/nano-g2-ultra/platformio.ini

@@ -20,5 +20,5 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/nano-g2
 lib_deps = 
   ${nrf52840_base.lib_deps}
   # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4
 ;upload_protocol = fs

variants/nrf52840/r1-neo/variant.cpp

@@ -43,3 +43,11 @@ void initVariant()
     // pinMode(PIN_3V3_EN, OUTPUT);
     // digitalWrite(PIN_3V3_EN, HIGH);
 }
+
+void earlyInitVariant()
+{
+    pinMode(DCDC_EN_HOLD, OUTPUT);
+    digitalWrite(DCDC_EN_HOLD, HIGH);
+    pinMode(NRF_ON, OUTPUT);
+    digitalWrite(NRF_ON, HIGH);
+}

variants/nrf52840/rak4631_epaper/platformio.ini

@@ -15,7 +15,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak4631
 lib_deps = 
   ${nrf52840_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
   # renovate: datasource=custom.pio depName=Melopero RV3028 packageName=melopero/library/Melopero RV3028
   melopero/Melopero RV3028@1.2.0
   # renovate: datasource=custom.pio depName=RAK NCP5623 RGB LED packageName=rakwireless/library/RAKwireless NCP5623 RGB LED library

variants/nrf52840/rak4631_epaper_onrxtx/platformio.ini

@@ -17,7 +17,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak4631
 lib_deps = 
   ${nrf52840_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
   # renovate: datasource=custom.pio depName=Melopero RV3028 packageName=melopero/library/Melopero RV3028
   melopero/Melopero RV3028@1.2.0
   # renovate: datasource=custom.pio depName=RAK NCP5623 RGB LED packageName=rakwireless/library/RAKwireless NCP5623 RGB LED library

variants/nrf52840/rak_wismeshtap/variant.cpp

@@ -42,4 +42,21 @@ void initVariant()
     // 3V3 Power Rail
     pinMode(PIN_3V3_EN, OUTPUT);
     digitalWrite(PIN_3V3_EN, HIGH);
+}
+
+void variant_shutdown()
+{
+    // GPIO restores input status, otherwise there will be leakage current
+    nrf_gpio_cfg_default(TFT_BL);
+    nrf_gpio_cfg_default(TFT_DC);
+    nrf_gpio_cfg_default(TFT_CS);
+    nrf_gpio_cfg_default(TFT_SCLK);
+    nrf_gpio_cfg_default(TFT_MOSI);
+    nrf_gpio_cfg_default(TFT_MISO);
+    nrf_gpio_cfg_default(SCREEN_TOUCH_INT);
+    nrf_gpio_cfg_default(WB_I2C1_SCL);
+    nrf_gpio_cfg_default(WB_I2C1_SDA);
+
+    // nrf_gpio_cfg_default(WB_I2C2_SCL);
+    // nrf_gpio_cfg_default(WB_I2C2_SDA);
 }

variants/nrf52840/t-echo/platformio.ini

@@ -32,7 +32,7 @@ lib_deps =
   # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
   https://github.com/meshtastic/GxEPD2/archive/a05c11c02862624266b61599b0d6ba93e33c6f24.zip
   # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4
 ;upload_protocol = fs
 
 [env:t-echo-inkhud]
@@ -53,4 +53,4 @@ lib_deps =
   ${inkhud.lib_deps} ; InkHUD libs first, so we get GFXRoot instead of AdafruitGFX
   ${nrf52840_base.lib_deps}
   # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4

variants/nrf52840/t-echo/variant.cpp

@@ -42,3 +42,13 @@ void initVariant()
     pinMode(PIN_LED3, OUTPUT);
     ledOff(PIN_LED3);
 }
+
+void variant_shutdown()
+{
+    // To power off the T-Echo, the display must be set
+    // as an input pin; otherwise, there will be leakage current.
+    pinMode(PIN_EINK_CS, INPUT);
+    pinMode(PIN_EINK_DC, INPUT);
+    pinMode(PIN_EINK_RES, INPUT);
+    pinMode(PIN_EINK_BUSY, INPUT);
+}