rbxii3/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2026-01-04 00:52:17 +00:00
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'master' into usbhost

Browse Source
This commit is contained in:
Thomas Göttgens
2024-05-11 16:18:42 +02:00
committed by GitHub
parent 4558f70769 96b5bd2fd0
commit dd98a07aa0
138 changed files with 2273 additions and 672 deletions
Download Patch File Download Diff File Expand all files Collapse all files

7
variants/Dongle_nRF52840-pca10059-v1/variant.cpp
View File

@@ -29,10 +29,7 @@ const uint32_t g_ADigitalPinMap[] = {
void initVariant()
{
// LED1 & LED2
// LED1
pinMode(PIN_LED1, OUTPUT);
ledOff(PIN_LED1);
pinMode(PIN_LED2, OUTPUT);
ledOff(PIN_LED2);
}
}

18
variants/Dongle_nRF52840-pca10059-v1/variant.h
View File

@@ -43,16 +43,12 @@ extern "C" {
#define NUM_ANALOG_OUTPUTS (0)
// LEDs
#define PIN_LED1 (0 + 12) // Blue LED P1.12
#define PIN_LED2 (0 + 6) // Built in Green P0.06
// Green Built in LED1
// #define PIN_LED1 (0 + 6) // LED1 P1.15
// RGB NeoPixel LED2
// #define PIN_LED1 (0 + 8) Red
// #define PIN_LED1 (32 + 9) Green
// #define PIN_LED1 (0 + 12) Blue
#define PIN_LED1 (0 + 6) // Built in Green P0.06
#define PIN_LED2 (0 + 6) // Just here for completeness
#define RGBLED_RED (0 + 8) // Red of RGB P0.08
#define RGBLED_GREEN (32 + 9) // Green of RGB P1.09
#define RGBLED_BLUE (0 + 12) // Blue of RGB P0.12
#define RGBLED_CA // comment out this line if you have a common cathode type, as defined use common anode logic
#define LED_BUILTIN PIN_LED1
#define LED_CONN PIN_LED2
@@ -168,4 +164,4 @@ static const uint8_t SCK = PIN_SPI_SCK;
* Arduino objects - C++ only
*----------------------------------------------------------------------------*/
#endif
#endif

10
variants/TWC_mesh_v4/platformio.ini Normal file
View File

@@ -0,0 +1,10 @@
[env:TWC_mesh_v4]
extends = nrf52840_base
board = nordic_pca10059
board_level = extra
build_flags = ${nrf52840_base.build_flags} -I variants/TWC_mesh_v4 -D TWC_mesh_v4 -L".pio\libdeps\TWC_mesh_v4\BSEC2 Software Library\src\cortex-m4\fpv4-sp-d16-hard"
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/TWC_mesh_v4>
lib_deps =
${nrf52840_base.lib_deps}
zinggjm/GxEPD2@^1.4.9
debug_tool = jlink

38
variants/TWC_mesh_v4/variant.cpp Normal file
View File

@@ -0,0 +1,38 @@
/*
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
Copyright (c) 2016 Sandeep Mistry All right reserved.
Copyright (c) 2018, Adafruit Industries (adafruit.com)
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "variant.h"
#include "nrf.h"
#include "wiring_constants.h"
#include "wiring_digital.h"
const uint32_t g_ADigitalPinMap[] = {
// P0
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
// P1
32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
void initVariant()
{
// LED1 & LED2
pinMode(PIN_LED1, OUTPUT);
ledOff(PIN_LED1);
pinMode(PIN_LED2, OUTPUT);
ledOff(PIN_LED2);
}

133
variants/TWC_mesh_v4/variant.h Normal file
View File

@@ -0,0 +1,133 @@
#ifndef _VARIANT_TWC_MESH_V4_
#define _VARIANT_TWC_MESH_V4_
#define PCA10059
/** Master clock frequency */
#define VARIANT_MCK (64000000ul)
#define USE_LFXO // Board uses 32khz crystal for LF
// define USE_LFRC // Board uses RC for LF
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "WVariant.h"
#ifdef __cplusplus
extern "C" {
#endif // __cplusplus
// Number of pins defined in PinDescription array
#define PINS_COUNT (48)
#define NUM_DIGITAL_PINS (48)
#define NUM_ANALOG_INPUTS (6)
#define NUM_ANALOG_OUTPUTS (0)
// LEDs
#define PIN_LED1 (32 + 10) // Blue LED P1.10
#define PIN_LED2 (32 + 15) // Built in Green P1.15
// RGB NeoPixel LED2
// #define PIN_LED1 (0 + 8) Red
// #define PIN_LED1 (32 + 9) Green
// #define PIN_LED1 (0 + 12) Blue
#define LED_BUILTIN PIN_LED1
#define LED_CONN PIN_LED2
#define LED_GREEN PIN_LED1
#define LED_BLUE PIN_LED2
#define LED_STATE_ON 0 // State when LED is litted
/*
* Buttons
*/
#define PIN_BUTTON1 (32 + 2) // BTN_DN P1.02 Built in button
/*
* Analog pins
*/
#define PIN_A0 (0 + 29) // using VDIV (A6 / P0.29)
static const uint8_t A0 = PIN_A0;
#define ADC_RESOLUTION 14
// Other pins
#define PIN_AREF (-1) // AREF Not yet used
static const uint8_t AREF = PIN_AREF;
/*
* Serial interfaces
*/
#define PIN_SERIAL1_RX (0 + 24)
#define PIN_SERIAL1_TX (0 + 25)
// Connected to Jlink CDC
#define PIN_SERIAL2_RX (-1)
#define PIN_SERIAL2_TX (-1)
/*
* SPI Interfaces
*/
#define SPI_INTERFACES_COUNT 1
#define PIN_SPI_MISO (0 + 15) // MISO P0.15
#define PIN_SPI_MOSI (0 + 13) // MOSI P0.13
#define PIN_SPI_SCK (0 + 14) // SCK P0.14
static const uint8_t SS = (0 + 6); // LORA_CS P0.6
static const uint8_t MOSI = PIN_SPI_MOSI;
static const uint8_t MISO = PIN_SPI_MISO;
static const uint8_t SCK = PIN_SPI_SCK;
////#define USE_EINK
#define USE_SSD1306
/*
* Wire Interfaces
*/
#define WIRE_INTERFACES_COUNT 1
#define PIN_WIRE_SDA (0 + 12) // SDA P0.12
#define PIN_WIRE_SCL (0 + 11) // SCL P0.11
// NiceRF 868 LoRa module
#define USE_SX1262
#define USE_LLCC68
#define SX126X_CS (0 + 6) // LORA_CS P0.06
#define SX126X_DIO1 (0 + 7) // DIO1 P0.07
#define SX126X_BUSY (0 + 26) // LORA_BUSY P0.26
#define SX126X_RESET (0 + 27) // LORA_RESET P0.27
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
#define PIN_GPS_EN (-1)
#define PIN_GPS_PPS (-1) // Pulse per second input from the GPS
#define GPS_RX_PIN PIN_SERIAL1_RX
#define GPS_TX_PIN PIN_SERIAL1_TX
// Battery
// The battery sense is hooked to pin A6 (0.29)
#define BATTERY_PIN PIN_A0
// and has 12 bit resolution
#define BATTERY_SENSE_RESOLUTION_BITS 12
#define BATTERY_SENSE_RESOLUTION 4096.0
#undef AREF_VOLTAGE
#define AREF_VOLTAGE 3.0
#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
#define ADC_MULTIPLIER (2.0F)
#ifdef __cplusplus
}
#endif
/*----------------------------------------------------------------------------
* Arduino objects - C++ only
*----------------------------------------------------------------------------*/
#endif

2
variants/betafpv_2400_tx_micro/platformio.ini
View File

@@ -15,4 +15,4 @@ upload_protocol = esptool
upload_speed = 460800
lib_deps =
${esp32_base.lib_deps}
makuna/NeoPixelBus@^2.7.1
adafruit/Adafruit NeoPixel @ ^1.12.0

9
variants/betafpv_2400_tx_micro/variant.h
View File

@@ -1,5 +1,4 @@
// https://betafpv.com/products/elrs-micro-tx-module
#include <NeoPixelBus.h>
// 0.96" OLED
#define I2C_SDA 22
@@ -15,7 +14,11 @@
#define LORA_CS 5
#define RF95_FAN_EN 17
#define LED_PIN 16 // This is a LED_WS2812 not a standard LED
// #define LED_PIN 16 // This is a LED_WS2812 not a standard LED
#define HAS_NEOPIXEL // Enable the use of neopixels
#define NEOPIXEL_COUNT 1 // How many neopixels are connected
#define NEOPIXEL_DATA 16 // gpio pin used to send data to the neopixels
#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use
#define BUTTON_PIN 25
#define BUTTON_NEED_PULLUP
@@ -31,4 +34,4 @@
#define SX128X_TXEN 26
#define SX128X_RXEN 27
#define SX128X_RESET LORA_RESET
#define SX128X_MAX_POWER 13
#define SX128X_MAX_POWER 13

31
variants/diy/nrf52_promicro_diy_tcxo/variant.cpp Normal file
View File

@@ -0,0 +1,31 @@
/*
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
Copyright (c) 2016 Sandeep Mistry All right reserved.
Copyright (c) 2018, Adafruit Industries (adafruit.com)
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "variant.h"
#include "nrf.h"
#include "wiring_constants.h"
#include "wiring_digital.h"
const uint32_t g_ADigitalPinMap[] = {
// P0
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
// P1
32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};

154
variants/diy/nrf52_promicro_diy_tcxo/variant.h Normal file
View File

@@ -0,0 +1,154 @@
#ifndef _VARIANT_PROMICRO_DIY_
#define _VARIANT_PROMICRO_DIY_
/** Master clock frequency */
#define VARIANT_MCK (64000000ul)
// #define USE_LFXO // Board uses 32khz crystal for LF
#define USE_LFRC // Board uses RC for LF
#define PROMICRO_DIY_TCXO
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "WVariant.h"
#ifdef __cplusplus
extern "C" {
#endif // __cplusplus
/*
NRF52 PRO MICRO PIN ASSIGNMENT
| Pin | Function | | Pin | Function |
|-------|------------|---|---------|-------------|
| Gnd | | | vbat | |
| P0.06 | Serial2 RX | | vbat | |
| P0.08 | Serial2 TX | | Gnd | |
| Gnd | | | reset | |
| Gnd | | | ext_vcc | *see 0.13 |
| P0.17 | RXEN | | P0.31 | BATTERY_PIN |
| P0.20 | GPS_RX | | P0.29 | BUSY |
| P0.22 | GPS_TX | | P0.02 | MISO |
| P0.24 | GPS_EN | | P1.15 | MOSI |
| P1.00 | BUTTON_PIN | | P1.13 | CS |
| P0.11 | SCL | | P1.11 | SCK |
| P1.04 | SDA | | P0.10 | DIO1/IRQ |
| P1.06 | Free pin | | P0.09 | RESET |
| | | | | |
| | Mid board | | | Internal |
| P1.01 | Free pin | | 0.15 | LED |
| P1.02 | Free pin | | 0.13 | 3V3_EN |
| P1.07 | Free pin | | | |
*/
// Number of pins defined in PinDescription array
#define PINS_COUNT (48)
#define NUM_DIGITAL_PINS (48)
#define NUM_ANALOG_INPUTS (1)
#define NUM_ANALOG_OUTPUTS (0)
// Pin 13 enables 3.3V periphery. If the Lora module is on this pin, then it should stay enabled at all times.
#define PIN_3V3_EN (0 + 13) // P0.13
// Analog pins
#define BATTERY_PIN (0 + 31) // P0.31 Battery ADC
#define ADC_CHANNEL ADC1_GPIO4_CHANNEL
#define ADC_RESOLUTION 14
#define BATTERY_SENSE_RESOLUTION_BITS 12
#define BATTERY_SENSE_RESOLUTION 4096.0
// Definition of milliVolt per LSB => 3.0V ADC range and 12-bit ADC resolution = 3000mV/4096
#define VBAT_MV_PER_LSB (0.73242188F)
// Voltage divider value => 1.5M + 1M voltage divider on VBAT = (1.5M / (1M + 1.5M))
#define VBAT_DIVIDER (0.6F)
// Compensation factor for the VBAT divider
#define VBAT_DIVIDER_COMP (1.73)
// Fixed calculation of milliVolt from compensation value
#define REAL_VBAT_MV_PER_LSB (VBAT_DIVIDER_COMP * VBAT_MV_PER_LSB)
#undef AREF_VOLTAGE
#define AREF_VOLTAGE 3.0
#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
#define ADC_MULTIPLIER VBAT_DIVIDER_COMP // REAL_VBAT_MV_PER_LSB
#define VBAT_RAW_TO_SCALED(x) (REAL_VBAT_MV_PER_LSB * x)
// WIRE IC AND IIC PINS
#define WIRE_INTERFACES_COUNT 1
#define PIN_WIRE_SDA (32 + 4) // P1.04
#define PIN_WIRE_SCL (0 + 11) // P0.11
// LED
#define PIN_LED1 (0 + 15) // P0.15
#define LED_BUILTIN PIN_LED1
// Actually red
#define LED_BLUE PIN_LED1
#define LED_STATE_ON 1 // State when LED is lit
// Button
#define BUTTON_PIN (32 + 0) // P1.00
// GPS
#define PIN_GPS_TX (0 + 22) // P0.22
#define PIN_GPS_RX (0 + 20) // P0.20
#define PIN_GPS_EN (0 + 24) // P0.24
#define GPS_POWER_TOGGLE
#define GPS_UBLOX
// define GPS_DEBUG
// UART interfaces
#define PIN_SERIAL1_RX PIN_GPS_TX
#define PIN_SERIAL1_TX PIN_GPS_RX
#define PIN_SERIAL2_RX (0 + 6) // P0.06
#define PIN_SERIAL2_TX (0 + 8) // P0.08
// Serial interfaces
#define SPI_INTERFACES_COUNT 1
#define PIN_SPI_MISO (0 + 2) // P0.02
#define PIN_SPI_MOSI (32 + 15) // P1.15
#define PIN_SPI_SCK (32 + 11) // P1.11
// LORA MODULES
#define USE_LLCC68
#define USE_SX1262
// LORA CONFIG
#define SX126X_CS (32 + 13) // P1.13 FIXME - we really should define LORA_CS instead
#define SX126X_DIO1 (0 + 10) // P0.10 IRQ
#define SX126X_DIO2_AS_RF_SWITCH // Note for E22 modules: DIO2 is not attached internally to TXEN for automatic TX/RX switching,
// so it needs connecting externally if it is used in this way
#define SX126X_BUSY (0 + 29) // P0.29
#define SX126X_RESET (0 + 9) // P0.09
#define SX126X_RXEN (0 + 17) // P0.17
#define SX126X_TXEN RADIOLIB_NC // Assuming that DIO2 is connected to TXEN pin. If not, TXEN must be connected.
/*
On the SX1262, DIO3 sets the voltage for an external TCXO, if one is present. If one is not present, then this should not be used.
Ebyte
e22-900mm22s has no TCXO
e22-900m22s has TCXO
e220-900mm22s has no TCXO, works with/without this definition, looks like DIO3 not connected at all
AI-thinker
RA-01SH does not have TCXO
Waveshare
Core1262 has TCXO
*/
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
#ifdef __cplusplus
}
#endif
/*----------------------------------------------------------------------------
* Arduino objects - C++ only
*----------------------------------------------------------------------------*/
#endif

31
variants/diy/nrf52_promicro_diy_xtal/variant.cpp Normal file
View File

@@ -0,0 +1,31 @@
/*
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
Copyright (c) 2016 Sandeep Mistry All right reserved.
Copyright (c) 2018, Adafruit Industries (adafruit.com)
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "variant.h"
#include "nrf.h"
#include "wiring_constants.h"
#include "wiring_digital.h"
const uint32_t g_ADigitalPinMap[] = {
// P0
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
// P1
32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};

153
variants/diy/nrf52_promicro_diy_xtal/variant.h Normal file
View File

@@ -0,0 +1,153 @@
#ifndef _VARIANT_PROMICRO_DIY_
#define _VARIANT_PROMICRO_DIY_
/** Master clock frequency */
#define VARIANT_MCK (64000000ul)
// #define USE_LFXO // Board uses 32khz crystal for LF
#define USE_LFRC // Board uses RC for LF
#define PROMICRO_DIY_XTAL
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "WVariant.h"
#ifdef __cplusplus
extern "C" {
#endif // __cplusplus
/*
NRF52 PRO MICRO PIN ASSIGNMENT
| Pin | Function | | Pin | Function |
|-------|------------|---|---------|-------------|
| Gnd | | | vbat | |
| P0.06 | Serial2 RX | | vbat | |
| P0.08 | Serial2 TX | | Gnd | |
| Gnd | | | reset | |
| Gnd | | | ext_vcc | *see 0.13 |
| P0.17 | RXEN | | P0.31 | BATTERY_PIN |
| P0.20 | GPS_RX | | P0.29 | BUSY |
| P0.22 | GPS_TX | | P0.02 | MISO |
| P0.24 | GPS_EN | | P1.15 | MOSI |
| P1.00 | BUTTON_PIN | | P1.13 | CS |
| P0.11 | SCL | | P1.11 | SCK |
| P1.04 | SDA | | P0.10 | DIO1/IRQ |
| P1.06 | Free pin | | P0.09 | RESET |
| | | | | |
| | Mid board | | | Internal |
| P1.01 | Free pin | | 0.15 | LED |
| P1.02 | Free pin | | 0.13 | 3V3_EN |
| P1.07 | Free pin | | | |
*/
// Number of pins defined in PinDescription array
#define PINS_COUNT (48)
#define NUM_DIGITAL_PINS (48)
#define NUM_ANALOG_INPUTS (1)
#define NUM_ANALOG_OUTPUTS (0)
// Pin 13 enables 3.3V periphery. If the Lora module is on this pin, then it should stay enabled at all times.
#define PIN_3V3_EN (0 + 13) // P0.13
// Analog pins
#define BATTERY_PIN (0 + 31) // P0.31 Battery ADC
#define ADC_CHANNEL ADC1_GPIO4_CHANNEL
#define ADC_RESOLUTION 14
#define BATTERY_SENSE_RESOLUTION_BITS 12
#define BATTERY_SENSE_RESOLUTION 4096.0
// Definition of milliVolt per LSB => 3.0V ADC range and 12-bit ADC resolution = 3000mV/4096
#define VBAT_MV_PER_LSB (0.73242188F)
// Voltage divider value => 1.5M + 1M voltage divider on VBAT = (1.5M / (1M + 1.5M))
#define VBAT_DIVIDER (0.6F)
// Compensation factor for the VBAT divider
#define VBAT_DIVIDER_COMP (1.73)
// Fixed calculation of milliVolt from compensation value
#define REAL_VBAT_MV_PER_LSB (VBAT_DIVIDER_COMP * VBAT_MV_PER_LSB)
#undef AREF_VOLTAGE
#define AREF_VOLTAGE 3.0
#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
#define ADC_MULTIPLIER VBAT_DIVIDER_COMP // REAL_VBAT_MV_PER_LSB
#define VBAT_RAW_TO_SCALED(x) (REAL_VBAT_MV_PER_LSB * x)
// WIRE IC AND IIC PINS
#define WIRE_INTERFACES_COUNT 1
#define PIN_WIRE_SDA (32 + 4) // P1.04
#define PIN_WIRE_SCL (0 + 11) // P0.11
// LED
#define PIN_LED1 (0 + 15) // P0.15
#define LED_BUILTIN PIN_LED1
// Actually red
#define LED_BLUE PIN_LED1
#define LED_STATE_ON 1 // State when LED is lit
// Button
#define BUTTON_PIN (32 + 0) // P1.00
// GPS
#define PIN_GPS_TX (0 + 22) // P0.22
#define PIN_GPS_RX (0 + 20) // P0.20
#define PIN_GPS_EN (0 + 24) // P0.24
#define GPS_POWER_TOGGLE
#define GPS_UBLOX
// define GPS_DEBUG
// UART interfaces
#define PIN_SERIAL1_RX PIN_GPS_TX
#define PIN_SERIAL1_TX PIN_GPS_RX
#define PIN_SERIAL2_RX (0 + 6) // P0.06
#define PIN_SERIAL2_TX (0 + 8) // P0.08
// Serial interfaces
#define SPI_INTERFACES_COUNT 1
#define PIN_SPI_MISO (0 + 2) // P0.02
#define PIN_SPI_MOSI (32 + 15) // P1.15
#define PIN_SPI_SCK (32 + 11) // P1.11
// LORA MODULES
#define USE_LLCC68
#define USE_SX1262
// LORA CONFIG
#define SX126X_CS (32 + 13) // P1.13 FIXME - we really should define LORA_CS instead
#define SX126X_DIO1 (0 + 10) // P0.10 IRQ
#define SX126X_DIO2_AS_RF_SWITCH // Note for E22 modules: DIO2 is not attached internally to TXEN for automatic TX/RX switching,
// so it needs connecting externally if it is used in this way
#define SX126X_BUSY (0 + 29) // P0.29
#define SX126X_RESET (0 + 9) // P0.09
#define SX126X_RXEN (0 + 17) // P0.17
#define SX126X_TXEN RADIOLIB_NC // Assuming that DIO2 is connected to TXEN pin. If not, TXEN must be connected.
/*
On the SX1262, DIO3 sets the voltage for an external TCXO, if one is present. If one is not present, then this should not be used.
Ebyte
e22-900mm22s has no TCXO
e22-900m22s has TCXO
e220-900mm22s has no TCXO, works with/without this definition, looks like DIO3 not connected at all
AI-thinker
RA-01SH does not have TCXO
Waveshare
Core1262 has TCXO
*/
// #define SX126X_DIO3_TCXO_VOLTAGE 1.8
#ifdef __cplusplus
}
#endif
/*----------------------------------------------------------------------------
* Arduino objects - C++ only
*----------------------------------------------------------------------------*/
#endif

32
variants/diy/platformio.ini
View File

@@ -44,3 +44,35 @@ build_flags =
${esp32_base.build_flags}
-D DIY_V1
-I variants/diy/hydra
; Promicro + E22(0)-xxxMM / RA-01SH modules board variant - DIY - without TCXO
[env:nrf52_promicro_diy_xtal]
extends = nrf52840_base
board = promicro-nrf52840
board_level = extra
build_flags = ${nrf52840_base.build_flags}
-I variants/diy/nrf52_promicro_diy_xtal
-D NRF52_PROMICRO_DIY
-D OLED_RU
-L "${platformio.libdeps_dir}/${this.__env__}/BSEC2 Software Library/src/cortex-m4/fpv4-sp-d16-hard"
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/diy/nrf52_promicro_diy_xtal>
lib_deps =
${nrf52840_base.lib_deps}
debug_tool = jlink
; Promicro + E22(0)-xxxM / HT-RA62 modules board variant - DIY - with TCXO
[env:nrf52_promicro_diy_tcxo]
extends = nrf52840_base
board = promicro-nrf52840
board_level = extra
build_flags = ${nrf52840_base.build_flags}
-I variants/diy/nrf52_promicro_diy_tcxo
-D NRF52_PROMICRO_DIY
-D OLED_RU
-L "${platformio.libdeps_dir}/${this.__env__}/BSEC2 Software Library/src/cortex-m4/fpv4-sp-d16-hard"
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/diy/nrf52_promicro_diy_tcxo>
lib_deps =
${nrf52840_base.lib_deps}
debug_tool = jlink

2
variants/esp32-s3-pico/platformio.ini
View File

@@ -22,4 +22,4 @@ build_flags = ${esp32_base.build_flags}
lib_deps = ${esp32s3_base.lib_deps}
zinggjm/GxEPD2@^1.5.3
;adafruit/Adafruit NeoPixel@^1.10.7
adafruit/Adafruit NeoPixel @ ^1.12.0

4
variants/esp32-s3-pico/variant.h
View File

@@ -10,6 +10,10 @@
// #define LED_PIN PIN_LED
// Board has RGB LED 21
#define HAS_NEOPIXEL // Enable the use of neopixels
#define NEOPIXEL_COUNT 1 // How many neopixels are connected
#define NEOPIXEL_DATA 21 // gpio pin used to send data to the neopixels
#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use
// The usbPower state is revered ?
// DEBUG | ??:??:?? 365 [Power] Battery: usbPower=0, isCharging=0, batMv=4116, batPct=90

18
variants/heltec_esp32c3/variant.h
View File

@@ -1,24 +1,16 @@
#define I2C_SDA 1
#define I2C_SCL 0
#define BUTTON_PIN 9
#define BUTTON_NEED_PULLUP
// LED flashes brighter
// LED pin on HT-DEV-ESP_V2 and HT-DEV-ESP_V3
// https://resource.heltec.cn/download/HT-CT62/HT-CT62_Reference_Design.pdf
#define LED_PIN 18 // LED
#define LED_INVERTED 1
// https://resource.heltec.cn/download/HT-DEV-ESP/HT-DEV-ESP_V3_Sch.pdf
#define LED_PIN 2 // LED
#define LED_INVERTED 0
#define HAS_SCREEN 1
#define HAS_SCREEN 0
#define HAS_GPS 0
#undef GPS_RX_PIN
#undef GPS_TX_PIN
#undef LORA_SCK
#undef LORA_MISO
#undef LORA_MOSI
#undef LORA_CS
#define USE_SX1262
#define LORA_SCK 10
#define LORA_MISO 6

3
variants/lora_relay_v1/platformio.ini
View File

@@ -20,4 +20,5 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/lora_relay_v1>
lib_deps =
${nrf52840_base.lib_deps}
sparkfun/SparkFun BQ27441 LiPo Fuel Gauge Arduino Library@^1.1.0
bodmer/TFT_eSPI@^2.4.76
bodmer/TFT_eSPI@^2.4.76
adafruit/Adafruit NeoPixel @ ^1.12.0

6
variants/lora_relay_v1/variant.h
View File

@@ -44,7 +44,11 @@ extern "C" {
// LEDs
#define PIN_LED1 (3)
#define PIN_LED2 (4)
#define PIN_NEOPIXEL (8)
// #define PIN_NEOPIXEL (8)
#define HAS_NEOPIXEL // Enable the use of neopixels
#define NEOPIXEL_COUNT 1 // How many neopixels are connected
#define NEOPIXEL_DATA 8 // gpio pin used to send data to the neopixels
#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use
#define LED_BUILTIN PIN_LED1
#define LED_CONN PIN_LED2

1
variants/lora_relay_v2/platformio.ini
View File

@@ -23,3 +23,4 @@ lib_deps =
${nrf52840_base.lib_deps}
sparkfun/SparkFun BQ27441 LiPo Fuel Gauge Arduino Library@^1.1.0
bodmer/TFT_eSPI@^2.4.76
adafruit/Adafruit NeoPixel @ ^1.12.0

7
variants/lora_relay_v2/variant.h
View File

@@ -61,7 +61,12 @@ extern "C" {
// LEDs
#define PIN_LED1 (3)
#define PIN_LED2 (4)
#define PIN_NEOPIXEL (8)
// #define PIN_NEOPIXEL (8)
#define HAS_NEOPIXEL // Enable the use of neopixels
#define NEOPIXEL_COUNT 1 // How many neopixels are connected
#define NEOPIXEL_DATA 8 // gpio pin used to send data to the neopixels
#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use
#define PIN_BUZZER (40)
#define LED_BUILTIN PIN_LED1

4
variants/my_esp32s3_diy_eink/platformio.ini
View File

@@ -13,7 +13,7 @@ platform_packages =
lib_deps =
${esp32s3_base.lib_deps}
zinggjm/GxEPD2@^1.5.1
adafruit/Adafruit NeoPixel@^1.10.7
adafruit/Adafruit NeoPixel @ ^1.12.0
build_unflags = -DARDUINO_USB_MODE=1
build_flags =
;${esp32s3_base.build_flags} -D MY_ESP32S3_DIY -I variants/my_esp32s3_diy_eink
@@ -24,4 +24,4 @@ build_flags =
-DEINK_HEIGHT=128
-DBOARD_HAS_PSRAM
-mfix-esp32-psram-cache-issue
-DARDUINO_USB_MODE=0
-DARDUINO_USB_MODE=0

4
variants/my_esp32s3_diy_eink/variant.h
View File

@@ -12,6 +12,10 @@
#define I2C_SCL 17 // 2
// #define LED_PIN 38 // This is a RGB LED not a standard LED
#define HAS_NEOPIXEL // Enable the use of neopixels
#define NEOPIXEL_COUNT 1 // How many neopixels are connected
#define NEOPIXEL_DATA 38 // gpio pin used to send data to the neopixels
#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use
#define BUTTON_PIN 0 // This is the BOOT button
#define BUTTON_NEED_PULLUP

4
variants/my_esp32s3_diy_oled/platformio.ini
View File

@@ -12,11 +12,11 @@ platform_packages =
tool-esptoolpy@^1.40500.0
lib_deps =
${esp32s3_base.lib_deps}
adafruit/Adafruit NeoPixel@^1.10.7
adafruit/Adafruit NeoPixel @ ^1.12.0
build_unflags = -DARDUINO_USB_MODE=1
build_flags =
;${esp32s3_base.build_flags} -D MY_ESP32S3_DIY -I variants/my_esp32s3_diy_oled
${esp32s3_base.build_flags} -D PRIVATE_HW -I variants/my_esp32s3_diy_oled
-DBOARD_HAS_PSRAM
-mfix-esp32-psram-cache-issue
-DARDUINO_USB_MODE=0
-DARDUINO_USB_MODE=0

6
variants/my_esp32s3_diy_oled/variant.h
View File

@@ -12,6 +12,10 @@
#define I2C_SCL 17 // 2
// #define LED_PIN 38 // This is a RGB LED not a standard LED
#define HAS_NEOPIXEL // Enable the use of neopixels
#define NEOPIXEL_COUNT 1 // How many neopixels are connected
#define NEOPIXEL_DATA 38 // gpio pin used to send data to the neopixels
#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use
#define BUTTON_PIN 0 // This is the BOOT button
#define BUTTON_NEED_PULLUP
@@ -53,4 +57,4 @@
// #define PIN_EINK_DC 1
// #define PIN_EINK_RES (-1)
// #define PIN_EINK_SCLK 5
// #define PIN_EINK_MOSI 6
// #define PIN_EINK_MOSI 6

3
variants/t-deck/variant.h
View File

@@ -18,6 +18,7 @@
#define TFT_OFFSET_ROTATION 0
#define SCREEN_ROTATE
#define SCREEN_TRANSITION_FRAMERATE 5
#define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
#define HAS_TOUCHSCREEN 1
#define SCREEN_TOUCH_INT 16
@@ -96,4 +97,4 @@
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
// Internally the TTGO module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for the sx1262interface
// code)
// code)

3
variants/t-echo/platformio.ini
View File

@@ -15,8 +15,9 @@ build_flags = ${nrf52840_base.build_flags} -Ivariants/t-echo
-DEINK_LIMIT_FASTREFRESH=20 ; How many consecutive fast-refreshes are permitted
-DEINK_LIMIT_RATE_BACKGROUND_SEC=30 ; Minimum interval between BACKGROUND updates
-DEINK_LIMIT_RATE_RESPONSIVE_SEC=1 ; Minimum interval between RESPONSIVE updates
-DEINK_LIMIT_GHOSTING_PX=2000 ; (Optional) How much image ghosting is tolerated
; -DEINK_LIMIT_GHOSTING_PX=2000 ; (Optional) How much image ghosting is tolerated
-DEINK_BACKGROUND_USES_FAST ; (Optional) Use FAST refresh for both BACKGROUND and RESPONSIVE, until a limit is reached.
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/t-echo>
lib_deps =
${nrf52840_base.lib_deps}

13
variants/t-echo/variant.h
View File

@@ -65,6 +65,9 @@ extern "C" {
#define PIN_BUTTON2 (0 + 18) // 0.18 is labeled on the board as RESET but we configure it in the bootloader as a regular GPIO
#define PIN_BUTTON_TOUCH (0 + 11) // 0.11 is the soft touch button on T-Echo
#define BUTTON_CLICK_MS 400
#define BUTTON_TOUCH_MS 200
/*
* Analog pins
*/
@@ -131,7 +134,7 @@ External serial flash WP25R1635FZUIL0
// Note DIO2 is attached internally to the module to an analog switch for TX/RX switching
#define SX1262_DIO3 \
(0 + 21) // This is used as an *output* from the sx1262 and connected internally to power the tcxo, do not drive from the main
// CPU?
// CPU?
#define SX126X_BUSY (0 + 17)
#define SX126X_RESET (0 + 25)
// Not really an E22 but TTGO seems to be trying to clone that
@@ -177,13 +180,13 @@ External serial flash WP25R1635FZUIL0
#define PIN_GPS_STANDBY (32 + 2) // An output to wake GPS, low means allow sleep, high means force wake
// Seems to be missing on this new board
// #define PIN_GPS_PPS (32 + 4) // Pulse per second input from the GPS
#define PIN_GPS_TX (32 + 9) // This is for bits going TOWARDS the CPU
#define PIN_GPS_RX (32 + 8) // This is for bits going TOWARDS the GPS
#define GPS_TX_PIN (32 + 9) // This is for bits going TOWARDS the CPU
#define GPS_RX_PIN (32 + 8) // This is for bits going TOWARDS the GPS
#define GPS_THREAD_INTERVAL 50
#define PIN_SERIAL1_RX PIN_GPS_TX
#define PIN_SERIAL1_TX PIN_GPS_RX
#define PIN_SERIAL1_RX GPS_TX_PIN
#define PIN_SERIAL1_TX GPS_RX_PIN
// PCF8563 RTC Module
#define PCF8563_RTC 0x51

4
variants/unphone/platformio.ini
View File

@@ -13,6 +13,7 @@ build_unflags =
-D ARDUINO_USB_MODE
build_flags = ${esp32_base.build_flags}
;-D BOARD_HAS_PSRAM // what's up with this - doesn't seem to be recognised at boot
-D UNPHONE
-I variants/unphone
-D ARDUINO_USB_MODE=0
@@ -27,4 +28,5 @@ build_src_filter = ${esp32_base.build_src_filter} +<../variants/unphone>
lib_deps = ${esp32s3_base.lib_deps}
lovyan03/LovyanGFX @ ^1.1.8
https://gitlab.com/hamishcunningham/unphonelibrary#meshtastic @ ^9.0.0
https://gitlab.com/hamishcunningham/unphonelibrary#meshtastic @ ^9.0.0
adafruit/Adafruit NeoPixel @ ^1.12.0

1
variants/unphone/variant.cpp
View File

@@ -10,6 +10,7 @@ void initVariant()
unphone.printWakeupReason(); // what woke us up? (stored, not printed :|)
unphone.checkPowerSwitch(); // if power switch is off, shutdown
unphone.backlight(false); // setup backlight and make sure its off
unphone.expanderPower(true); // enable power to expander / hat / sheild
for (int i = 0; i < 3; i++) { // buzz a bit
unphone.vibe(true);

2
variants/unphone/variant.h
View File

@@ -48,7 +48,7 @@
#undef GPS_RX_PIN
#undef GPS_TX_PIN
#define HAS_SDCARD 1
// #define HAS_SDCARD 1 // causes hang if defined
#define SDCARD_CS 43
#define LED_PIN 13 // the red part of the RGB LED

52
variants/wiphone/pins_arduino.h Normal file
View File

@@ -0,0 +1,52 @@
#ifndef Pins_Arduino_h
#define Pins_Arduino_h
#include <stdint.h>
#define EXTERNAL_NUM_INTERRUPTS 16
#define NUM_DIGITAL_PINS 20
#define NUM_ANALOG_INPUTS 16
#define analogInputToDigitalPin(p) (((p) < 20) ? (esp32_adc2gpio[(p)]) : -1)
#define digitalPinToInterrupt(p) (((p) < 40) ? (p) : -1)
#define digitalPinHasPWM(p) (p < 34)
static const uint8_t TX = 1;
static const uint8_t RX = 3;
static const uint8_t SDA = 21;
static const uint8_t SCL = 22;
static const uint8_t SS = 5;
static const uint8_t MOSI = 23;
static const uint8_t MISO = 19;
static const uint8_t SCK = 18;
static const uint8_t G23 = 23;
static const uint8_t G19 = 19;
static const uint8_t G18 = 18;
static const uint8_t G3 = 3;
static const uint8_t G16 = 16;
static const uint8_t G21 = 21;
static const uint8_t G2 = 2;
static const uint8_t G12 = 12;
static const uint8_t G15 = 15;
static const uint8_t G35 = 35;
static const uint8_t G36 = 36;
static const uint8_t G25 = 25;
static const uint8_t G26 = 26;
static const uint8_t G1 = 1;
static const uint8_t G17 = 17;
static const uint8_t G22 = 22;
static const uint8_t G5 = 5;
static const uint8_t G13 = 13;
static const uint8_t G0 = 0;
static const uint8_t G34 = 34;
static const uint8_t DAC1 = 25;
static const uint8_t DAC2 = 26;
static const uint8_t ADC1 = 35;
static const uint8_t ADC2 = 36;
#endif /* Pins_Arduino_h */

13
variants/wiphone/platformio.ini Normal file
View File

@@ -0,0 +1,13 @@
[env:wiphone]
extends = esp32_base
board = wiphone
monitor_filters = esp32_exception_decoder
board_build.partitions = default_16MB.csv
build_flags =
${esp32_base.build_flags} -D WIPHONE -I variants/wiphone
lib_deps =
${esp32_base.lib_deps}
lovyan03/LovyanGFX@^1.1.8
sparkfun/SX1509 IO Expander@^3.0.5
pololu/APA102@^3.0.0

58
variants/wiphone/variant.h Normal file
View File

@@ -0,0 +1,58 @@
#define I2C_SDA 15
#define I2C_SCL 25
#define GPIO_EXTENDER 1509
#define EXTENDER_FLAG 0x40
#define EXTENDER_PIN(x) (x + EXTENDER_FLAG)
#undef RF95_SCK
#undef RF95_MISO
#undef RF95_MOSI
#undef RF95_NSS
#define RF95_SCK 14
#define RF95_MISO 12
#define RF95_MOSI 13
#define RF95_NSS 27
#define USE_RF95
#define LORA_DIO0 38
#define LORA_RESET RADIOLIB_NC
#define LORA_DIO1 RADIOLIB_NC
#define LORA_DIO2 RADIOLIB_NC
// This board has no GPS or Screen for now
#undef GPS_RX_PIN
#undef GPS_TX_PIN
#define NO_GPS
#define HAS_GPS 0
#define NO_SCREEN
#define HAS_SCREEN 0
// Default SPI1 will be mapped to the display
#define ST7789_SDA 23
#define ST7789_SCK 18
#define ST7789_CS 5
#define ST7789_RS 26
#define ST7789_BL -1 // EXTENDER_PIN(9)
#define ST7789_RESET -1
#define ST7789_MISO 19
#define ST7789_BUSY -1
#define ST7789_SPI_HOST SPI3_HOST
#define ST7789_BACKLIGHT_EN -1 // EXTENDER_PIN(9)
#define SPI_FREQUENCY 40000000
#define SPI_READ_FREQUENCY 16000000
#define TFT_HEIGHT 240
#define TFT_WIDTH 320
#define TFT_OFFSET_X 0
#define TFT_OFFSET_Y 0
#define TFT_OFFSET_ROTATION 0
#define SCREEN_ROTATE
#define SCREEN_TRANSITION_FRAMERATE 5
#define I2S_MCLK_GPIO0
#define I2S_BCK_PIN 4 // rev1.3 - 4 (wp05)
#define I2S_WS_PIN 33
#define I2S_MOSI_PIN 21
#define I2S_MISO_PIN 34

1
variants/xiao_ble/variant.h
View File

@@ -181,6 +181,7 @@ static const uint8_t SCL = PIN_WIRE_SCL;
#define BAT_READ \
14 // P0_14 = 14 Reads battery voltage from divider on signal board. (PIN_VBAT is reading voltage divider on XIAO and is
// program pin 32 / or P0.31)
#define BATTERY_SENSE_RESOLUTION_BITS 10
#define CHARGE_LED 23 // P0_17 = 17 D23 YELLOW CHARGE LED
#define HICHG 22 // P0_13 = 13 D22 Charge-select pin for Lipo for 100 mA instead of default 50mA charge