rbxii3/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2025-12-20 17:52:35 +00:00
Code Issues Packages Projects Releases Wiki Activity

Trunk

Browse Source
This commit is contained in:
Ben Meadors
2025-09-24 06:16:38 -05:00
parent 949f881ae8
commit db55d8a59d
2 changed files with 12 additions and 14 deletions
Download Patch File Download Diff File Expand all files Collapse all files

7
variants/nrf52840/heltec_mesh_solar/variant.cpp
View File

@@ -32,10 +32,9 @@ const uint32_t g_ADigitalPinMap[] = {
void initVariant()
{
pinMode(BQ4050_EMERGENCY_SHUTDOWN_PIN, INPUT);
pinMode(BQ4050_EMERGENCY_SHUTDOWN_PIN, INPUT);
#if defined(PIN_SCREEN_VDD_CTL)
pinMode(PIN_SCREEN_VDD_CTL, OUTPUT);
digitalWrite(PIN_SCREEN_VDD_CTL, LOW); // Start with power on
pinMode(PIN_SCREEN_VDD_CTL, OUTPUT);
digitalWrite(PIN_SCREEN_VDD_CTL, LOW); // Start with power on
#endif
}

19
variants/nrf52840/heltec_mesh_solar/variant.h
View File

@@ -39,16 +39,15 @@ extern "C" {
#define NUM_ANALOG_INPUTS (1)
#define NUM_ANALOG_OUTPUTS (0)
#define PIN_LED1 (0 + 4) // green (confirmed on 1.0 board)
#define PIN_LED1 (0 + 4) // green (confirmed on 1.0 board)
#define LED_BLUE PIN_LED1 // fake for bluefruit library
#define LED_GREEN PIN_LED1
#define LED_BUILTIN LED_GREEN
#define LED_STATE_ON 0 // State when LED is lit
#define LED_STATE_ON 0 // State when LED is lit
#define HAS_NEOPIXEL // Enable the use of neopixels
#define NEOPIXEL_COUNT 1 // How many neopixels are connected
#define NEOPIXEL_DATA (32+15) // gpio pin used to send data to the neopixels
#define NEOPIXEL_DATA (32 + 15) // gpio pin used to send data to the neopixels
#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use
/*
@@ -88,14 +87,14 @@ No longer populated on PCB
#define USE_SX1262
// #define USE_SX1268
#define SX126X_CS (0 + 24) // FIXME - we really should define LORA_CS instead
#define LORA_CS (0 + 24)
#define LORA_CS (0 + 24)
#define SX126X_DIO1 (0 + 20)
// Note DIO2 is attached internally to the module to an analog switch for TX/RX switching
// #define SX1262_DIO3 (0 + 21)
// This is used as an *output* from the sx1262 and connected internally to power the tcxo, do not drive from the
// main
// CPU?
#define SX126X_BUSY (0 + 17)
#define SX126X_BUSY (0 + 17)
#define SX126X_RESET (0 + 25)
// Not really an E22 but TTGO seems to be trying to clone that
#define SX126X_DIO2_AS_RF_SWITCH
@@ -132,16 +131,16 @@ No longer populated on PCB
// For LORA, spi 0
#define PIN_SPI_MISO (0 + 23)
#define PIN_SPI_MOSI (0 + 22)
#define PIN_SPI_SCK (0 + 19)
#define PIN_SPI_SCK (0 + 19)
// #define PIN_PWR_EN (0 + 6)
// To debug via the segger JLINK console rather than the CDC-ACM serial device
// #define USE_SEGGER
#define BQ4050_SDA_PIN (32+1) // I2C data line pin
#define BQ4050_SCL_PIN (32+0) // I2C clock line pin
#define BQ4050_EMERGENCY_SHUTDOWN_PIN (32+3) // Emergency shutdown pin
#define BQ4050_SDA_PIN (32 + 1) // I2C data line pin
#define BQ4050_SCL_PIN (32 + 0) // I2C clock line pin
#define BQ4050_EMERGENCY_SHUTDOWN_PIN (32 + 3) // Emergency shutdown pin
#define HAS_RTC 0
#ifdef __cplusplus