rbxii3/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2026-01-06 01:48:13 +00:00
Code Issues Packages Projects Releases Wiki Activity

Fixed RAK11200 configuration and added to build-all (#1192)

Browse Source 
* Fixed RAK11200 configuration and added to build-all 

Co-authored-by: Mike Kinney <mike.kinney@gmail.com>
This commit is contained in:
Ben Meadors
2022-02-10 20:21:36 -06:00
committed by GitHub
parent 7ea6babb7f
commit d79dc631f1
6 changed files with 66 additions and 11 deletions
Download Patch File Download Diff File Expand all files Collapse all files

46
variants/rak11200/pins_arduino.h Normal file
View File

@@ -0,0 +1,46 @@
#ifndef Pins_Arduino_h
#define Pins_Arduino_h
#include <stdint.h>
#define EXTERNAL_NUM_INTERRUPTS 16
#define NUM_DIGITAL_PINS 40
#define NUM_ANALOG_INPUTS 16
#define analogInputToDigitalPin(p) (((p) < 20) ? (esp32_adc2gpio[(p)]) : -1)
#define digitalPinToInterrupt(p) (((p) < 40) ? (p) : -1)
#define digitalPinHasPWM(p) (p < 34)
#define LED_GREEN 12
#define LED_BLUE 2
#define LED_BUILTIN LED_GREEN
static const uint8_t TX = 1;
static const uint8_t RX = 3;
#define TX1 21
#define RX1 19
#define WB_IO1 14
#define WB_IO2 27
#define WB_IO3 26
#define WB_IO4 23
#define WB_IO5 13
#define WB_IO6 22
#define WB_SW1 34
#define WB_A0 36
#define WB_A1 39
#define WB_CS 32
#define WB_LED1 12
#define WB_LED2 2
static const uint8_t SDA = 4;
static const uint8_t SCL = 5;
static const uint8_t SS = 32;
static const uint8_t MOSI = 25;
static const uint8_t MISO = 35;
static const uint8_t SCK = 33;
#endif /* Pins_Arduino_h */

2
variants/WisCore_RAK11200_Board/platformio.ini → variants/rak11200/platformio.ini
View File

@@ -2,4 +2,4 @@
extends = esp32_base
board = wiscore_rak11200
build_flags =
${esp32_base.build_flags} -D RAK_11200 -I variants/WisCore_RAK11200_Board
${esp32_base.build_flags} -D RAK_11200 -I variants/rak11200

16
variants/WisCore_RAK11200_Board/variant.h → variants/rak11200/variant.h
View File

@@ -42,14 +42,16 @@ static const uint8_t SS = 32;
static const uint8_t MOSI = 25;
static const uint8_t MISO = 35;
static const uint8_t SCK = 33;
#endif /* Pins_Arduino_h */
/* -------- Meshtastic pins -------- */
#define I2C_SDA SDA
#define I2C_SCL SCL
#define GPS_RX_PIN RX
#define GPS_RX_PIN TX
#undef GPS_RX_PIN
#define GPS_RX_PIN (RX1)
#undef GPS_TX_PIN
#define GPS_TX_PIN (TX1)
#define LED_PIN LED_BLUE
@@ -63,18 +65,20 @@ static const uint8_t SCK = 33;
#define LORA_DIO2 WB_IO5 // BUSY for SX1262/SX1268
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262/SX1268, if DIO3 is high the TXCO is enabled
// This is a hack for the radio pin run-around with ESP32 variants
#undef RF95_SCK
#define RF95_SCK SCK
#undef RF95_MISO
#define RF95_MISO MISO
#undef RF95_MOSI
#define RF95_MOSI MOSI
#undef RF95_NSS
#define RF95_NSS SS
#define USE_SX1262
#define SX126X_CS (RF95_NSS)// NSS for SX126X
#define SX126X_CS (SS)// NSS for SX126X
#define SX126X_DIO1 (LORA_DIO1)
#define SX126X_BUSY (LORA_DIO2)
#define SX126X_RESET (LORA_RESET)
#define SX126X_TXEN (-1)
#define SX126X_RXEN (WB_IO3)
#define SX126X_E22 // DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
#endif /* Pins_Arduino_h */