T-Deck/T-Watch: enhancements/fixes (#2786)

* T-Deck: enhancements/fixes

* trunk fmt

* T-Watch board update

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

variants/t-deck/platformio.ini

@@ -11,4 +11,4 @@ build_flags = ${esp32_base.build_flags}
   -Ivariants/t-deck
 
 lib_deps = ${esp32s3_base.lib_deps}
-	lovyan03/LovyanGFX@^1.1.8
+	lovyan03/LovyanGFX@^1.1.9

variants/t-deck/variant.h

@@ -27,8 +27,8 @@
 #define BUTTON_PIN 0
 // #define BUTTON_NEED_PULLUP
 
-#undef GPS_RX_PIN
-#undef GPS_TX_PIN
+#define GPS_RX_PIN 44
+#define GPS_TX_PIN 43
 
 // Have SPI interface SD card slot
 #define HAS_SDCARD 1
@@ -41,7 +41,7 @@
 #define BATTERY_PIN 4 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
 // ratio of voltage divider = 2.0 (RD2=100k, RD3=100k)
 #define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage.
-#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
+#define ADC_CHANNEL ADC1_GPIO4_CHANNEL
 
 // keyboard
 #define I2C_SDA 18 // I2C pins for this board

variants/t-watch-s3/platformio.ini

@@ -3,8 +3,6 @@
 extends = esp32s3_base
 board = t-watch-s3
 upload_protocol = esptool
-upload_speed = 115200
-#upload_port = /dev/tty.usbmodem3485188D636C1
 
 build_flags = ${esp32_base.build_flags} 
   -DT_WATCH_S3
@@ -12,6 +10,6 @@ build_flags = ${esp32_base.build_flags}
   -DPCF8563_RTC=0x51
 
 lib_deps = ${esp32s3_base.lib_deps}
-	lovyan03/LovyanGFX@^1.1.8
+	lovyan03/LovyanGFX@^1.1.9
   lewisxhe/PCF8563_Library@1.0.1
   adafruit/Adafruit DRV2605 Library@^1.2.2