feat: T-Watch Ultra support

variants/esp32s3/t-deck-pro/variant.h

@@ -30,6 +30,7 @@
 
 // vibration motor
 #define PIN_VIBRATION 2
+#define HAS_DRV2605 1
 
 // Have SPI interface SD card slot
 #define HAS_SDCARD

variants/esp32s3/t-watch-ultra/pins_arduino.h

@@ -0,0 +1,93 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+// #ifndef digitalPinToInterrupt
+// #define digitalPinToInterrupt(p) (((p) < 48) ? (p) : -1)
+// #endif
+
+#define USB_VID 0x303a
+#define USB_PID 0x8227
+#define USB_MANUFACTURER "LILYGO"
+#define USB_PRODUCT "T-Watch-Ultra"
+
+#define DISP_WIDTH 502
+#define DISP_HEIGHT 410
+
+// QSPI interface display
+#define DISP_D0 (38)
+#define DISP_D1 (39)
+#define DISP_D2 (42)
+#define DISP_D3 (45)
+#define DISP_SCK (40)
+#define DISP_CS (41)
+#define DISP_RST (37)
+#define DISP_TE (6)
+
+// Interrupt IO port
+#define TP_INT (12)
+#define RTC_INT (1)
+#define PMU_INT (7)
+#define NFC_INT (5)
+#define SENSOR_INT (8)
+#define NFC_CS (4)
+
+// PDM microphone
+#define MIC_SCK (17)
+#define MIC_DAT (18)
+
+// MAX98357A
+#define I2S_BCLK (9)
+#define I2S_WCLK (10)
+#define I2S_DOUT (11)
+
+#define SD_CS (21)
+
+// TX, RX pin connected to GPS
+static const uint8_t TX = 43;
+static const uint8_t RX = 44;
+
+// BHI260,PCF85063,AXP2101,DRV2605L share I2C Bus
+static const uint8_t SDA = 3;
+static const uint8_t SCL = 2;
+
+// Default sd cs pin
+static const uint8_t SS = SD_CS;
+static const uint8_t MOSI = 34;
+static const uint8_t MISO = 33;
+static const uint8_t SCK = 35;
+
+#define GPS_TX (TX)
+#define GPS_RX (RX)
+#define GPS_PPS (13)
+
+#define TP_SDA (SDA)
+#define TP_SCL (SCL)
+
+// LoRa and SD card share SPI bus -> variant.h
+// #define LORA_SCK  (SCK)   // share spi bus
+// #define LORA_MISO (MISO)  // share spi bus
+// #define LORA_MOSI (MOSI)  // share spi bus
+// #define LORA_CS   (36)
+// #define LORA_RST  (47)
+// #define LORA_BUSY (48)
+// #define LORA_IRQ  (14)
+
+// External expansion chip IO definition
+#define EXPANDS_DRV_EN (6)
+#define EXPANDS_DISP_EN (7)
+#define EXPANDS_TOUCH_RST (8)
+#define EXPANDS_SD_DET (10)
+
+// Peripheral definition exists
+#define USING_XL9555_EXPANDS
+#define USING_PCM_AMPLIFIER
+#define USING_PDM_MICROPHONE
+#define USING_PMU_MANAGE
+#define USING_INPUT_DEV_TOUCHPAD
+#define USING_ST25R3916
+#define USING_BHI260_SENSOR
+#define HAS_SD_CARD_SOCKET
+
+#endif /* Pins_Arduino_h */

variants/esp32s3/t-watch-ultra/platformio.ini

@@ -0,0 +1,63 @@
+; LilyGo T-Watch S3
+[env:t-watch-ultra]
+extends = esp32s3_base
+board = t-watch-ultra
+board_check = true
+board_build.partitions = default_16MB.csv
+upload_protocol = esptool
+
+build_flags = ${esp32_base.build_flags} -Ivariants/esp32s3/t-watch-ultra
+  -D T_WATCH_ULTRA
+  -D RADIOLIB_EXCLUDE_SX128X=1
+  -D RADIOLIB_EXCLUDE_SX127X=1
+  -D RADIOLIB_EXCLUDE_LR11X0=1
+  -D HAS_SDCARD
+  -D SDCARD_CS=21
+;  -DPCF85063_RTC=0x51
+;  -DHAS_BMA423=1
+
+lib_deps = ${esp32s3_base.lib_deps}
+  lovyan03/LovyanGFX#develop ; TODO: does not yet contain Panel_CO5300 amoled driver
+  adafruit/Adafruit DRV2605 Library@^1.2.4
+  earlephilhower/ESP8266Audio@^1.9.9
+  earlephilhower/ESP8266SAM@^1.0.1
+  lewisxhe/SensorLib@0.3.1
+
+[env:t-watch-ultra-tft]
+board_level = extra
+extends = env:t-watch-ultra
+build_flags =
+  ${env:t-watch-ultra.build_flags}
+  -D CONFIG_DISABLE_HAL_LOCKS=1
+  -D INPUTDRIVER_BUTTON_TYPE=0
+  -D HAS_SCREEN=1
+  -D HAS_TFT=1
+  -D USE_I2S_BUZZER
+  -D RAM_SIZE=5120
+  -D LV_LVGL_H_INCLUDE_SIMPLE
+  -D LV_CONF_INCLUDE_SIMPLE
+  -D LV_COMP_CONF_INCLUDE_SIMPLE
+  -D LV_USE_SYSMON=0
+  -D LV_USE_PROFILER=0
+  -D LV_USE_PERF_MONITOR=0
+  -D LV_USE_MEM_MONITOR=0
+  -D LV_USE_LOG=0
+  -D USE_LOG_DEBUG
+  -D LOG_DEBUG_INC=\"DebugConfiguration.h\"
+  -D RADIOLIB_SPI_PARANOID=0
+  -D LGFX_SCREEN_WIDTH=410
+  -D LGFX_SCREEN_HEIGHT=502
+  -D DISPLAY_SIZE=410x502 ; portrait mode
+  -D DISPLAY_SET_RESOLUTION
+  -D LGFX_DRIVER=LGFX_TWATCH_ULTRA
+  -D GFX_DRIVER_INC=\"graphics/LGFX/LGFX_T_WATCH_ULTRA.h\"
+;  -D LVGL_DRIVER=LVGL_T_WATCH_ULTRA
+;  -D LV_USE_ST7796=1
+  -D VIEW_320x240
+  -D USE_PACKET_API
+  -D MAP_FULL_REDRAW
+  -D CUSTOM_TOUCH_DRIVER
+
+lib_deps =
+  ${env:t-watch-ultra.lib_deps}
+  ${device-ui_base.lib_deps}

variants/esp32s3/t-watch-ultra/variant.h

@@ -0,0 +1,86 @@
+
+// CO5300 TFT AMOLED
+#define CO5300_CS 41
+#define CO5300_SCK 40
+#define CO5300_RESET 37
+#define CO5300_TE 6
+#define CO5300_IO0 38
+#define CO5300_IO1 39
+#define CO5300_IO2 42
+#define CO5300_IO3 45
+#define CO5300_SPI_HOST SPI2_HOST
+#define SPI_FREQUENCY 75000000
+#define SPI_READ_FREQUENCY 16000000 // irrelevant
+#define TFT_HEIGHT 502
+#define TFT_WIDTH 410
+#define TFT_OFFSET_X 0
+#define TFT_OFFSET_Y 0
+#define TFT_OFFSET_ROTATION 0
+#define SCREEN_TRANSITION_FRAMERATE 5 // fps
+
+#define HAS_TOUCHSCREEN 1
+#define SCREEN_TOUCH_INT 12
+#define TOUCH_I2C_PORT 0
+#define TOUCH_SLAVE_ADDRESS 0x1A
+#define WAKE_ON_TOUCH
+
+#define BUTTON_PIN 0
+
+#define USE_POWERSAVE
+#define SLEEP_TIME 120
+
+// External expansion chip XL9555
+#define USE_XL9555
+
+// MAX98357A
+#define HAS_I2S
+#define DAC_I2S_BCK 9
+#define DAC_I2S_WS 10
+#define DAC_I2S_DOUT 11
+#define DAC_I2S_MCLK 0 // TODO
+
+#define HAS_AXP2101
+// #define PMU_IRQ 7
+#define HAS_RTC 1
+#define HAS_DRV2605 1
+
+#define I2C_SDA 3
+#define I2C_SCL 2
+#define I2C_NO_RESCAN
+
+#define HAS_GPS 1
+#define GPS_BAUDRATE 38400
+#define GPS_RX_PIN 44
+#define GPS_TX_PIN 43
+#define PIN_GPS_PPS 13
+
+// SPI interface SD card slot
+#define SPI_MOSI MOSI
+#define SPI_SCK SCK
+#define SPI_MISO MISO
+#define SPI_CS 21
+#define SD_SPI_FREQUENCY 75000000U
+
+#define USE_SX1262
+// #define USE_SX1280
+
+#define LORA_SCK 35
+#define LORA_MISO 33
+#define LORA_MOSI 34
+#define LORA_CS 36
+
+#define LORA_DIO0 -1 // a No connect on the SX1262 module
+#define LORA_RESET 47
+#define LORA_DIO1 14 // SX1262 IRQ
+#define LORA_DIO2 48 // SX1262 BUSY
+#define LORA_DIO3
+
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_DIO2
+#define SX126X_RESET LORA_RESET
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+
+#define USE_VIRTUAL_KEYBOARD 1
+#define DISPLAY_CLOCK_FRAME 1

variants/esp32s3/tlora-pager/variant.h

@@ -70,6 +70,9 @@
 #define DAC_I2S_DIN 17
 #define DAC_I2S_MCLK 10
 
+// haptic driver
+#define HAS_DRV2605 1
+
 // gyroscope BHI260AP
 #define HAS_BHI260AP