rbxii3/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2025-12-22 18:52:30 +00:00
Code Issues Packages Projects Releases Wiki Activity

feat: T-Watch Ultra support

Browse Source
This commit is contained in:
mverch67
2025-09-30 20:05:22 +02:00
parent 94d4bdf05c
commit d5bb3db4ed
20 changed files with 489 additions and 20 deletions
Download Patch File Download Diff File Expand all files Collapse all files

84
src/graphics/TFTDisplay.cpp
View File

@@ -21,6 +21,86 @@ uint16_t TFT_MESH = TFT_MESH_OVERRIDE;
uint16_t TFT_MESH = COLOR565(0x67, 0xEA, 0x94);
#endif
#if defined(CO5300_CS)
#include <LovyanGFX.hpp> // Graphics and font library for AMOLED driver chip
class LGFX : public lgfx::LGFX_Device
{
lgfx::Panel_CO5300 _panel_instance;
lgfx::Bus_SPI _bus_instance;
public:
LGFX(void)
{
{
auto cfg = _bus_instance.config();
// configure SPI
cfg.spi_host = CO5300_SPI_HOST; // ESP32-S2,S3,C3 : SPI2_HOST or SPI3_HOST / ESP32 : VSPI_HOST or HSPI_HOST
cfg.spi_mode = SPI_MODE0;
cfg.freq_write = SPI_FREQUENCY; // SPI clock for transmission (up to 80MHz, rounded to the value obtained by dividing
// 80MHz by an integer)
cfg.freq_read = SPI_READ_FREQUENCY; // SPI clock when receiving
cfg.spi_3wire = false; // Set to true if reception is done on the MOSI pin
cfg.use_lock = true; // Set to true to use transaction locking
cfg.dma_channel = SPI_DMA_CH_AUTO; // SPI_DMA_CH_AUTO; // Set DMA channel to use (0=not use DMA / 1=1ch / 2=ch /
// SPI_DMA_CH_AUTO=auto setting)
cfg.pin_sclk = CO5300_SCK; // Set SPI SCLK pin number
cfg.pin_io0 = CO5300_IO0;
cfg.pin_io1 = CO5300_IO1;
cfg.pin_io2 = CO5300_IO2;
cfg.pin_io3 = CO5300_IO3;
_bus_instance.config(cfg); // applies the set value to the bus.
_panel_instance.setBus(&_bus_instance); // set the bus on the panel.
}
{ // Set the display panel control.
auto cfg = _panel_instance.config(); // Gets a structure for display panel settings.
cfg.pin_cs = CO5300_CS; // Pin number where CS is connected (-1 = disable)
cfg.pin_rst = CO5300_RESET; // Pin number where RST is connected (-1 = disable)
cfg.panel_width = TFT_WIDTH; // actual displayable width
cfg.panel_height = TFT_HEIGHT; // actual displayable height
cfg.offset_rotation = 0; // Rotation direction value offset 0~7 (4~7 is upside down)
cfg.offset_x = 22;
cfg.offset_y = 0;
cfg.dummy_read_pixel = 8; // Number of bits for dummy read before pixel readout
cfg.dummy_read_bits = 1; // Number of bits for dummy read before non-pixel data read
cfg.readable = true; // Set to true if data can be read
cfg.invert = false; // Set to true if the light/darkness of the panel is reversed
cfg.rgb_order = false; // Set to true if the panel's red and blue are swapped
cfg.dlen_16bit = false; // Set to true for panels that transmit data length in 16-bit units
cfg.bus_shared = true; // If the bus is shared with the SD card, set to true (bus control with drawJpgFile etc.)
// Set the following only when the display is shifted with a driver with a variable number of pixels
cfg.memory_width = TFT_WIDTH; // Maximum width supported by the driver IC
cfg.memory_height = TFT_HEIGHT; // Maximum height supported by the driver IC
_panel_instance.config(cfg);
}
setPanel(&_panel_instance);
}
bool init()
{
#ifdef CO5300_RESET
LOG_DEBUG("LGFX_Panel_CO5300::init()");
lgfx::pinMode(CO5300_RESET, lgfx::pin_mode_t::output);
lgfx::gpio_hi(CO5300_RESET);
delay(200);
lgfx::gpio_lo(CO5300_RESET);
delay(300);
lgfx::gpio_hi(CO5300_RESET);
delay(200);
#endif
return lgfx::LGFX_Device::init();
}
};
static LGFX *tft = nullptr;
#endif
#if defined(ST7735S)
#include <LovyanGFX.hpp> // Graphics and font library for ST7735 driver chip
@@ -1084,7 +1164,7 @@ static LGFX *tft = nullptr;
#if defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) || defined(ST7796_CS) || defined(ILI9341_DRIVER) || \
defined(ILI9342_DRIVER) || defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST72xx_DE) || \
(ARCH_PORTDUINO && HAS_SCREEN != 0)
defined(CO5300_CS) || (ARCH_PORTDUINO && HAS_SCREEN != 0)
#include "SPILock.h"
#include "TFTDisplay.h"
#include <SPI.h>
@@ -1424,7 +1504,7 @@ bool TFTDisplay::connect()
tft->setRotation(1); // T-Deck has the TFT in landscape
#elif defined(T_WATCH_S3)
tft->setRotation(2); // T-Watch S3 left-handed orientation
#elif ARCH_PORTDUINO || defined(SENSECAP_INDICATOR) || defined(T_LORA_PAGER)
#elif ARCH_PORTDUINO || defined(SENSECAP_INDICATOR) || defined(T_LORA_PAGER) || defined(T_WATCH_ULTRA)
tft->setRotation(0); // use config.yaml to set rotation
#else
tft->setRotation(3); // Orient horizontal and wide underneath the silkscreen name label