Merge branch 'develop' into multi-message-Storage

variants/esp32/diy/dr-dev/platformio.ini

@@ -2,6 +2,7 @@
 [env:meshtastic-dr-dev]
 extends = esp32_base
 board = esp32doit-devkit-v1
+board_level = extra
 board_upload.maximum_size = 4194304
 board_upload.maximum_ram_size = 532480
 build_flags =

variants/esp32/tbeam/platformio.ini

@@ -2,7 +2,7 @@
 [env:tbeam]
 extends = esp32_base
 board = ttgo-t-beam
-board_level = pr
+board_level = extra
 board_check = true
 lib_deps = ${esp32_base.lib_deps}
 build_flags = ${esp32_base.build_flags}

variants/esp32s3/link32_s3_v1/platformio.ini

@@ -1,6 +1,7 @@
 [env:link32-s3-v1]
 extends = esp32s3_base
 board = esp32-s3-devkitc-1
+board_level = extra
 build_flags = 
   ${esp32_base.build_flags}
   -D LINK_32

variants/nrf52840/ELECROW-ThinkNode-M3/variant.cpp

@@ -63,9 +63,20 @@ void initVariant()
 // called from main-nrf52.cpp during the cpuDeepSleep() function
 void variant_shutdown()
 {
+    digitalWrite(red_LED_PIN, HIGH);
+    digitalWrite(green_LED_PIN, HIGH);
+    digitalWrite(LED_BLUE, HIGH);
+
+    digitalWrite(PIN_EN1, LOW);
+    digitalWrite(PIN_EN2, LOW);
     digitalWrite(EEPROM_POWER, LOW);
     digitalWrite(KEY_POWER, LOW);
+    digitalWrite(DHT_POWER, LOW);
+    digitalWrite(ACC_POWER, LOW);
+    digitalWrite(Battery_POWER, LOW);
+    digitalWrite(GPS_POWER, LOW);
 
+    // This sets the pin to OUTPUT and LOW for the pins *not* in the if block.
     for (int pin = 0; pin < 48; pin++) {
         if (pin == PIN_POWER_USB || pin == BUTTON_PIN || pin == PIN_EN1 || pin == PIN_EN2 || pin == DHT_POWER ||
             pin == ACC_POWER || pin == Battery_POWER || pin == GPS_POWER || pin == LR1110_SPI_MISO_PIN ||

variants/nrf52840/nrf52.ini

@@ -19,7 +19,6 @@ build_type = release
 build_flags =
   -include variants/nrf52840/cpp_overrides/lfs_util.h
   ${arduino_base.build_flags}
-  -DSERIAL_BUFFER_SIZE=1024
   -Wno-unused-variable
   -Isrc/platform/nrf52
   -DLFS_NO_ASSERT                      ; Disable LFS assertions , see https://github.com/meshtastic/firmware/pull/3818

variants/nrf52840/nrf52832.ini

@@ -1,7 +1,9 @@
 [nrf52832_base]
 extends = nrf52_base
 
-build_flags = ${nrf52_base.build_flags} 
+build_flags =
+  ${nrf52_base.build_flags}
+  -DSERIAL_BUFFER_SIZE=1024
 
 lib_deps =
   ${nrf52_base.lib_deps}

variants/nrf52840/nrf52840.ini

@@ -1,7 +1,9 @@
 [nrf52840_base]
 extends = nrf52_base
 
-build_flags = ${nrf52_base.build_flags} 
+build_flags =
+   ${nrf52_base.build_flags}
+  -DSERIAL_BUFFER_SIZE=4096
 
 lib_deps =
   ${nrf52_base.lib_deps}

variants/rp2040/feather_rp2040_rfm95/platformio.ini

@@ -1,6 +1,7 @@
 [env:feather_rp2040_rfm95]
 extends = rp2040_base
 board = adafruit_feather
+board_level = extra
 upload_protocol = picotool
 # add our variants files to the include and src paths
 build_flags =