Merge branch 'develop' into multi-message-Storage

This commit is contained in:
Jonathan Bennett
2025-11-30 19:42:31 -06:00
committed by GitHub
18 changed files with 516 additions and 43 deletions

View File

@@ -370,7 +370,7 @@ void PowerFSM_setup()
// Don't add power saving transitions if we are a power saving tracker or sensor or have Wifi enabled. Sleep will be initiated
// through the modules
#if HAS_WIFI || !defined(MESHTASTIC_EXCLUDE_WIFI)
#if HAS_WIFI && !defined(MESHTASTIC_EXCLUDE_WIFI)
bool isTrackerOrSensor = config.device.role == meshtastic_Config_DeviceConfig_Role_TRACKER ||
config.device.role == meshtastic_Config_DeviceConfig_Role_TAK_TRACKER ||
config.device.role == meshtastic_Config_DeviceConfig_Role_SENSOR;

View File

@@ -342,19 +342,13 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
#else
dispdev = new ST7789Spi(&SPI1, ST7789_RESET, ST7789_RS, ST7789_NSS, GEOMETRY_RAWMODE, TFT_WIDTH, TFT_HEIGHT);
#endif
#if defined(USE_ST7796)
#elif defined(USE_ST7796)
#ifdef ESP_PLATFORM
dispdev = new ST7796Spi(&SPI1, ST7796_RESET, ST7796_RS, ST7796_NSS, GEOMETRY_RAWMODE, TFT_WIDTH, TFT_HEIGHT, ST7796_SDA,
ST7796_MISO, ST7796_SCK, TFT_SPI_FREQUENCY);
#else
dispdev = new ST7796Spi(&SPI1, ST7796_RESET, ST7796_RS, ST7796_NSS, GEOMETRY_RAWMODE, TFT_WIDTH, TFT_HEIGHT);
#endif
#endif
#if defined(USE_ST7789)
static_cast<ST7789Spi *>(dispdev)->setRGB(TFT_MESH);
#elif defined(USE_ST7796)
static_cast<ST7796Spi *>(dispdev)->setRGB(TFT_MESH);
#endif
#elif defined(USE_SSD1306)
dispdev = new SSD1306Wire(address.address, -1, -1, geometry,
(address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
@@ -367,7 +361,7 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
LOG_INFO("SSD1306 init success");
}
#elif defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7789_CS) || \
defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS)
defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(HACKADAY_COMMUNICATOR)
dispdev = new TFTDisplay(address.address, -1, -1, geometry,
(address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
#elif defined(USE_EINK) && !defined(USE_EINK_DYNAMICDISPLAY)
@@ -397,6 +391,12 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
isAUTOOled = true;
#endif
#if defined(USE_ST7789)
static_cast<ST7789Spi *>(dispdev)->setRGB(TFT_MESH);
#elif defined(USE_ST7796)
static_cast<ST7796Spi *>(dispdev)->setRGB(TFT_MESH);
#endif
ui = new OLEDDisplayUi(dispdev);
cmdQueue.setReader(this);
}
@@ -642,7 +642,7 @@ void Screen::setup()
#else
if (!config.display.flip_screen) {
#if defined(ST7701_CS) || defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7789_CS) || \
defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS)
defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(HACKADAY_COMMUNICATOR)
static_cast<TFTDisplay *>(dispdev)->flipScreenVertically();
#elif defined(USE_ST7789)
static_cast<ST7789Spi *>(dispdev)->flipScreenVertically();

View File

@@ -73,7 +73,8 @@
#endif
#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || \
defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(USE_ST7796)) && \
defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) || \
defined(HACKADAY_COMMUNICATOR) || defined(USE_ST7796)) && \
!defined(DISPLAY_FORCE_SMALL_FONTS)
// The screen is bigger so use bigger fonts
#define FONT_SMALL FONT_MEDIUM_LOCAL // Height: 19

View File

@@ -123,6 +123,11 @@ static void rak14014_tpIntHandle(void)
_rak14014_touch_int = true;
}
#elif defined(HACKADAY_COMMUNICATOR)
#include <Arduino_GFX_Library.h>
Arduino_DataBus *bus = nullptr;
Arduino_GFX *tft = nullptr;
#elif defined(ST72xx_DE)
#include <LovyanGFX.hpp>
#include <TCA9534.h>
@@ -1135,7 +1140,7 @@ static LGFX *tft = nullptr;
#if defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) || defined(ST7796_CS) || defined(ILI9341_DRIVER) || \
defined(ILI9342_DRIVER) || defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST72xx_DE) || \
(ARCH_PORTDUINO && HAS_SCREEN != 0)
(ARCH_PORTDUINO && HAS_SCREEN != 0) || defined(HACKADAY_COMMUNICATOR)
#include "SPILock.h"
#include "TFTDisplay.h"
#include <SPI.h>
@@ -1271,12 +1276,15 @@ void TFTDisplay::display(bool fromBlank)
x_LastPixelUpdate = x;
}
}
#if defined(HACKADAY_COMMUNICATOR)
tft->draw16bitBeRGBBitmap(x_FirstPixelUpdate, y, &linePixelBuffer[x_FirstPixelUpdate],
(x_LastPixelUpdate - x_FirstPixelUpdate + 1), 1);
#else
// Step 4: Send the changed pixels on this line to the screen as a single block transfer.
// This function accepts pixel data MSB first so it can dump the memory straight out the SPI port.
tft->pushRect(x_FirstPixelUpdate, y, (x_LastPixelUpdate - x_FirstPixelUpdate + 1), 1,
&linePixelBuffer[x_FirstPixelUpdate]);
#endif
somethingChanged = true;
}
y++;
@@ -1340,6 +1348,8 @@ void TFTDisplay::sendCommand(uint8_t com)
display(true);
if (portduino_config.displayBacklight.pin > 0)
digitalWrite(portduino_config.displayBacklight.pin, TFT_BACKLIGHT_ON);
#elif defined(HACKADAY_COMMUNICATOR)
tft->displayOn();
#elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE)
tft->wakeup();
tft->powerSaveOff();
@@ -1352,7 +1362,8 @@ void TFTDisplay::sendCommand(uint8_t com)
unphone.backlight(true); // using unPhone library
#endif
#ifdef RAK14014
#elif !defined(M5STACK) && !defined(ST7789_CS) // T-Deck gets brightness set in Screen.cpp in the handleSetOn function
#elif !defined(M5STACK) && !defined(ST7789_CS) && \
!defined(HACKADAY_COMMUNICATOR) // T-Deck gets brightness set in Screen.cpp in the handleSetOn function
tft->setBrightness(172);
#endif
break;
@@ -1364,6 +1375,8 @@ void TFTDisplay::sendCommand(uint8_t com)
tft->clear();
if (portduino_config.displayBacklight.pin > 0)
digitalWrite(portduino_config.displayBacklight.pin, !TFT_BACKLIGHT_ON);
#elif defined(HACKADAY_COMMUNICATOR)
tft->displayOff();
#elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE)
tft->sleep();
tft->powerSaveOn();
@@ -1376,7 +1389,7 @@ void TFTDisplay::sendCommand(uint8_t com)
unphone.backlight(false); // using unPhone library
#endif
#ifdef RAK14014
#elif !defined(M5STACK)
#elif !defined(M5STACK) && !defined(HACKADAY_COMMUNICATOR)
tft->setBrightness(0);
#endif
break;
@@ -1392,7 +1405,7 @@ void TFTDisplay::setDisplayBrightness(uint8_t _brightness)
{
#ifdef RAK14014
// todo
#else
#elif !defined(HACKADAY_COMMUNICATOR)
tft->setBrightness(_brightness);
LOG_DEBUG("Brightness is set to value: %i ", _brightness);
#endif
@@ -1410,7 +1423,7 @@ bool TFTDisplay::hasTouch(void)
{
#ifdef RAK14014
return true;
#elif !defined(M5STACK)
#elif !defined(M5STACK) && !defined(HACKADAY_COMMUNICATOR)
return tft->touch() != nullptr;
#else
return false;
@@ -1429,7 +1442,7 @@ bool TFTDisplay::getTouch(int16_t *x, int16_t *y)
} else {
return false;
}
#elif !defined(M5STACK)
#elif !defined(M5STACK) && !defined(HACKADAY_COMMUNICATOR)
return tft->getTouch(x, y);
#else
return false;
@@ -1448,6 +1461,12 @@ bool TFTDisplay::connect()
LOG_INFO("Do TFT init");
#ifdef RAK14014
tft = new TFT_eSPI;
#elif defined(HACKADAY_COMMUNICATOR)
bus = new Arduino_ESP32SPI(TFT_DC, TFT_CS, 38 /* SCK */, 21 /* MOSI */, GFX_NOT_DEFINED /* MISO */, HSPI /* spi_num */);
tft = new Arduino_NV3007(bus, 40, 0 /* rotation */, false /* IPS */, 142 /* width */, 428 /* height */, 12 /* col offset 1 */,
0 /* row offset 1 */, 14 /* col offset 2 */, 0 /* row offset 2 */, nv3007_279_init_operations,
sizeof(nv3007_279_init_operations));
#else
tft = new LGFX;
#endif
@@ -1458,8 +1477,15 @@ bool TFTDisplay::connect()
#ifdef UNPHONE
unphone.backlight(true); // using unPhone library
#endif
#ifdef HACKADAY_COMMUNICATOR
bool beginStatus = tft->begin();
if (beginStatus)
LOG_DEBUG("TFT Success!");
else
LOG_ERROR("TFT Fail!");
#else
tft->init();
#endif
#if defined(M5STACK)
tft->setRotation(0);

View File

@@ -97,7 +97,7 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
(storeForwardModule->heartbeatInterval * 1200))) { // no heartbeat, overlap a bit
#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || \
defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) || \
defined(USE_ST7796) || ARCH_PORTDUINO) && \
defined(HACKADAY_COMMUNICATOR) || defined(USE_ST7796) || ARCH_PORTDUINO) && \
!defined(DISPLAY_FORCE_SMALL_FONTS)
display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 12,
8, imgQuestionL1);
@@ -110,7 +110,7 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
} else {
#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || \
defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) || \
defined(USE_ST7796)) && \
defined(HACKADAY_COMMUNICATOR) || defined(USE_ST7796)) && \
!defined(DISPLAY_FORCE_SMALL_FONTS)
display->drawFastImage(x + SCREEN_WIDTH - 18 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 16,
8, imgSFL1);
@@ -126,7 +126,7 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
// TODO: Raspberry Pi supports more than just the one screen size
#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || \
defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) || \
defined(USE_ST7796) || ARCH_PORTDUINO) && \
defined(HACKADAY_COMMUNICATOR) || defined(USE_ST7796) || ARCH_PORTDUINO) && \
!defined(DISPLAY_FORCE_SMALL_FONTS)
display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8,
imgInfoL1);

View File

@@ -924,7 +924,7 @@ void menuHandler::textMessageBaseMenu()
void menuHandler::systemBaseMenu()
{
enum optionsNumbers { Back, Notifications, ScreenOptions, Bluetooth, PowerMenu, Test, enumEnd };
enum optionsNumbers { Back, Notifications, ScreenOptions, Bluetooth, WiFiToggle, PowerMenu, Test, enumEnd };
static const char *optionsArray[enumEnd] = {"Back"};
static int optionsEnumArray[enumEnd] = {Back};
int options = 1;
@@ -940,6 +940,10 @@ void menuHandler::systemBaseMenu()
optionsArray[options] = "Bluetooth Toggle";
#endif
optionsEnumArray[options++] = Bluetooth;
#if HAS_WIFI && !defined(ARCH_PORTDUINO)
optionsArray[options] = "WiFi Toggle";
optionsEnumArray[options++] = WiFiToggle;
#endif
#if defined(M5STACK_UNITC6L)
optionsArray[options] = "Power";
#else
@@ -977,6 +981,11 @@ void menuHandler::systemBaseMenu()
} else if (selected == Bluetooth) {
menuQueue = bluetooth_toggle_menu;
screen->runNow();
#if HAS_WIFI && !defined(ARCH_PORTDUINO)
} else if (selected == WiFiToggle) {
menuQueue = wifi_toggle_menu;
screen->runNow();
#endif
} else if (selected == Back && !test_enabled) {
test_count++;
if (test_count > 4) {
@@ -1415,7 +1424,8 @@ void menuHandler::TFTColorPickerMenu(OLEDDisplay *display)
bannerOptions.optionsArrayPtr = optionsArray;
bannerOptions.optionsCount = 10;
bannerOptions.bannerCallback = [display](int selected) -> void {
#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || defined(T_DECK) || defined(T_LORA_PAGER) || HAS_TFT
#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || defined(T_DECK) || defined(T_LORA_PAGER) || \
HAS_TFT || defined(HACKADAY_COMMUNICATOR)
uint8_t TFT_MESH_r = 0;
uint8_t TFT_MESH_g = 0;
uint8_t TFT_MESH_b = 0;
@@ -1656,19 +1666,28 @@ void menuHandler::wifiBaseMenu()
void menuHandler::wifiToggleMenu()
{
enum optionsNumbers { Back, Wifi_toggle };
enum optionsNumbers { Back, Wifi_disable, Wifi_enable };
static const char *optionsArray[] = {"Back", "Disable"};
static const char *optionsArray[] = {"Back", "WiFi Disabled", "WiFi Enabled"};
BannerOverlayOptions bannerOptions;
bannerOptions.message = "Disable Wifi and\nEnable Bluetooth?";
bannerOptions.message = "WiFi Actions";
bannerOptions.optionsArrayPtr = optionsArray;
bannerOptions.optionsCount = 2;
bannerOptions.optionsCount = 3;
if (config.network.wifi_enabled == true)
bannerOptions.InitialSelected = 2;
else
bannerOptions.InitialSelected = 1;
bannerOptions.bannerCallback = [](int selected) -> void {
if (selected == Wifi_toggle) {
if (selected == Wifi_disable) {
config.network.wifi_enabled = false;
config.bluetooth.enabled = true;
service->reloadConfig(SEGMENT_CONFIG);
rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
} else if (selected == Wifi_enable) {
config.network.wifi_enabled = true;
config.bluetooth.enabled = false;
service->reloadConfig(SEGMENT_CONFIG);
rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
}
};
screen->showOverlayBanner(bannerOptions);
@@ -1716,7 +1735,7 @@ void menuHandler::screenOptionsMenu()
static int optionsEnumArray[5] = {Back};
int options = 1;
#if defined(T_DECK) || defined(T_LORA_PAGER)
#if defined(T_DECK) || defined(T_LORA_PAGER) || defined(HACKADAY_COMMUNICATOR)
optionsArray[options] = "Show Long/Short Name";
optionsEnumArray[options++] = NodeNameLength;
#endif
@@ -1728,7 +1747,8 @@ void menuHandler::screenOptionsMenu()
}
// Only show screen color for TFT displays
#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || defined(T_DECK) || defined(T_LORA_PAGER) || HAS_TFT
#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || defined(T_DECK) || defined(T_LORA_PAGER) || \
HAS_TFT || defined(HACKADAY_COMMUNICATOR)
optionsArray[options] = "Screen Color";
optionsEnumArray[options++] = ScreenColor;
#endif

View File

@@ -265,7 +265,7 @@ void UIRenderer::drawNodes(OLEDDisplay *display, int16_t x, int16_t y, const mes
#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || \
defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) || \
defined(USE_ST7796)) && \
defined(HACKADAY_COMMUNICATOR) || defined(USE_ST7796)) && \
!defined(DISPLAY_FORCE_SMALL_FONTS)
if (isHighResolution) {

View File

@@ -27,8 +27,8 @@ const uint8_t bluetoothConnectedIcon[36] PROGMEM = {0xfe, 0x01, 0xff, 0x03, 0x03
0xfe, 0x31, 0x00, 0x30, 0x30, 0x30, 0x30, 0x30, 0xf0, 0x3f, 0xe0, 0x1f};
#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || \
defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(USE_ST7796) || \
defined(ST7796_CS) || ARCH_PORTDUINO) && \
defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) || \
defined(USE_ST7796) || defined(HACKADAY_COMMUNICATOR) || ARCH_PORTDUINO) && \
!defined(DISPLAY_FORCE_SMALL_FONTS)
const uint8_t imgQuestionL1[] PROGMEM = {0xff, 0x01, 0x01, 0x32, 0x7b, 0x49, 0x49, 0x6f, 0x26, 0x01, 0x01, 0xff};
const uint8_t imgQuestionL2[] PROGMEM = {0x0f, 0x08, 0x08, 0x08, 0x06, 0x0f, 0x0f, 0x06, 0x08, 0x08, 0x08, 0x0f};

View File

@@ -0,0 +1,217 @@
#if defined(HACKADAY_COMMUNICATOR)
#include "HackadayCommunicatorKeyboard.h"
#include "main.h"
#define _TCA8418_COLS 10
#define _TCA8418_ROWS 8
#define _TCA8418_NUM_KEYS 80
#define _TCA8418_MULTI_TAP_THRESHOLD 1500
using Key = TCA8418KeyboardBase::TCA8418Key;
constexpr uint8_t modifierRightShiftKey = 30;
constexpr uint8_t modifierRightShift = 0b0001;
constexpr uint8_t modifierLeftShiftKey = 76; // keynum -1
constexpr uint8_t modifierLeftShift = 0b0001;
// constexpr uint8_t modifierSymKey = 42;
// constexpr uint8_t modifierSym = 0b0010;
// Num chars per key, Modulus for rotating through characters
static uint8_t HackadayCommunicatorTapMod[_TCA8418_NUM_KEYS] = {
0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, 2, 2, 2, 2, 2, 2, 2, 2, 1, 2, 2, 2, 2, 2, 2, 2, 2, 2, 0, 2, 2, 2, 2, 2, 2, 2, 2, 2,
0, 0, 0, 1, 1, 0, 1, 1, 1, 0, 0, 0, 1, 2, 2, 2, 2, 2, 2, 0, 0, 0, 1, 2, 2, 2, 1, 2, 2, 0, 0, 0, 2, 1, 2, 2, 0, 1, 1, 0,
};
static unsigned char HackadayCommunicatorTapMap[_TCA8418_NUM_KEYS][2] = {{},
{},
{'+'},
{'9'},
{'8'},
{'7'},
{'2'},
{'3'},
{'4'},
{'5'},
{Key::ESC},
{'q', 'Q'},
{'w', 'W'},
{'e', 'E'},
{'r', 'R'},
{'t', 'T'},
{'y', 'Y'},
{'u', 'U'},
{'i', 'I'},
{'o', 'O'},
{Key::TAB},
{'a', 'A'},
{'s', 'S'},
{'d', 'D'},
{'f', 'F'},
{'g', 'G'},
{'h', 'H'},
{'j', 'J'},
{'k', 'K'},
{'l', 'L'},
{},
{'z', 'Z'},
{'x', 'X'},
{'c', 'C'},
{'v', 'V'},
{'b', 'B'},
{'n', 'N'},
{'m', 'M'},
{',', '<'},
{'.', '>'},
{},
{},
{},
{'\\'},
{' '},
{},
{Key::RIGHT},
{Key::DOWN},
{Key::LEFT},
{},
{},
{},
{'-'},
{'6', '^'},
{'5', '%'},
{'4', '$'},
{'[', '{'},
{']', '}'},
{'p', 'P'},
{},
{},
{},
{'*'},
{'3', '#'},
{'2', '@'},
{'1', '!'},
{Key::SELECT},
{'\'', '"'},
{';', ':'},
{},
{},
{},
{'/', '?'},
{'='},
{'.', '>'},
{'0', ')'},
{},
{Key::UP},
{Key::BSP},
{}};
HackadayCommunicatorKeyboard::HackadayCommunicatorKeyboard()
: TCA8418KeyboardBase(_TCA8418_ROWS, _TCA8418_COLS), modifierFlag(0), last_modifier_time(0), last_key(-1), next_key(-1),
last_tap(0L), char_idx(0), tap_interval(0)
{
reset();
}
void HackadayCommunicatorKeyboard::reset(void)
{
TCA8418KeyboardBase::reset();
enableInterrupts();
}
// handle multi-key presses (shift and alt)
void HackadayCommunicatorKeyboard::trigger()
{
uint8_t count = keyCount();
if (count == 0)
return;
for (uint8_t i = 0; i < count; ++i) {
uint8_t k = readRegister(TCA8418_REG_KEY_EVENT_A + i);
uint8_t key = k & 0x7F;
if (k & 0x80) {
pressed(key);
} else {
released();
state = Idle;
}
}
}
void HackadayCommunicatorKeyboard::pressed(uint8_t key)
{
if (state == Init || state == Busy) {
return;
}
if (modifierFlag && (millis() - last_modifier_time > _TCA8418_MULTI_TAP_THRESHOLD)) {
modifierFlag = 0;
}
uint8_t next_key = 0;
int row = (key - 1) / 10;
int col = (key - 1) % 10;
if (row >= _TCA8418_ROWS || col >= _TCA8418_COLS) {
return; // Invalid key
}
next_key = row * _TCA8418_COLS + col;
state = Held;
uint32_t now = millis();
tap_interval = now - last_tap;
updateModifierFlag(next_key);
if (isModifierKey(next_key)) {
last_modifier_time = now;
}
if (tap_interval < 0) {
last_tap = 0;
state = Busy;
return;
}
if (next_key != last_key || tap_interval > _TCA8418_MULTI_TAP_THRESHOLD) {
char_idx = 0;
} else {
char_idx += 1;
}
last_key = next_key;
last_tap = now;
}
void HackadayCommunicatorKeyboard::released()
{
if (state != Held) {
return;
}
if (last_key < 0 || last_key >= _TCA8418_NUM_KEYS) {
last_key = -1;
state = Idle;
return;
}
uint32_t now = millis();
last_tap = now;
if (HackadayCommunicatorTapMod[last_key])
queueEvent(HackadayCommunicatorTapMap[last_key][modifierFlag % HackadayCommunicatorTapMod[last_key]]);
if (isModifierKey(last_key) == false)
modifierFlag = 0;
}
void HackadayCommunicatorKeyboard::updateModifierFlag(uint8_t key)
{
if (key == modifierRightShiftKey) {
modifierFlag ^= modifierRightShift;
} else if (key == modifierLeftShiftKey) {
modifierFlag ^= modifierLeftShift;
}
}
bool HackadayCommunicatorKeyboard::isModifierKey(uint8_t key)
{
return (key == modifierRightShiftKey || key == modifierLeftShiftKey);
}
#endif

View File

@@ -0,0 +1,26 @@
#include "TCA8418KeyboardBase.h"
class HackadayCommunicatorKeyboard : public TCA8418KeyboardBase
{
public:
HackadayCommunicatorKeyboard();
void reset(void);
void trigger(void) override;
virtual ~HackadayCommunicatorKeyboard() {}
protected:
void pressed(uint8_t key) override;
void released(void) override;
void updateModifierFlag(uint8_t key);
bool isModifierKey(uint8_t key);
private:
uint8_t modifierFlag; // Flag to indicate if a modifier key is pressed
uint32_t last_modifier_time; // Timestamp of the last modifier key press
int8_t last_key;
int8_t next_key;
uint32_t last_tap;
uint8_t char_idx;
int32_t tap_interval;
};

View File

@@ -7,6 +7,8 @@
#include "TDeckProKeyboard.h"
#elif defined(T_LORA_PAGER)
#include "TLoraPagerKeyboard.h"
#elif defined(HACKADAY_COMMUNICATOR)
#include "HackadayCommunicatorKeyboard.h"
#else
#include "TCA8418Keyboard.h"
#endif
@@ -20,6 +22,8 @@ KbI2cBase::KbI2cBase(const char *name)
TCAKeyboard(*(new TDeckProKeyboard()))
#elif defined(T_LORA_PAGER)
TCAKeyboard(*(new TLoraPagerKeyboard()))
#elif defined(HACKADAY_COMMUNICATOR)
TCAKeyboard(*(new HackadayCommunicatorKeyboard()))
#else
TCAKeyboard(*(new TCA8418Keyboard()))
#endif
@@ -328,7 +332,7 @@ int32_t KbI2cBase::runOnce()
break;
}
if (e.inputEvent != INPUT_BROKER_NONE) {
LOG_DEBUG("TCA8418 Notifying: %i Char: %c", e.inputEvent, e.kbchar);
// LOG_DEBUG("TCA8418 Notifying: %i Char: %c", e.inputEvent, e.kbchar);
this->notifyObservers(&e);
}
TCAKeyboard.trigger();

View File

@@ -394,7 +394,10 @@ void setup()
io.pinMode(EXPANDS_GPIO_EN, OUTPUT);
io.digitalWrite(EXPANDS_GPIO_EN, HIGH);
io.pinMode(EXPANDS_SD_PULLEN, INPUT);
#elif defined(HACKADAY_COMMUNICATOR)
pinMode(KB_INT, INPUT);
#endif
concurrency::hasBeenSetup = true;
#if ARCH_PORTDUINO
SPISettings spiSettings(portduino_config.spiSpeed, MSBFIRST, SPI_MODE0);
@@ -877,8 +880,8 @@ void setup()
if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
#if defined(ST7701_CS) || defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || \
defined(ST7789_CS) || defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(USE_ST7796) || \
defined(USE_SPISSD1306)
defined(ST7789_CS) || defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(ST7796_CS) || \
defined(USE_SPISSD1306) || defined(USE_ST7796) || defined(HACKADAY_COMMUNICATOR)
screen = new graphics::Screen(screen_found, screen_model, screen_geometry);
#elif defined(ARCH_PORTDUINO)
if ((screen_found.port != ScanI2C::I2CPort::NO_I2C || portduino_config.displayPanel) &&
@@ -1154,8 +1157,8 @@ void setup()
// Don't call screen setup until after nodedb is setup (because we need
// the current region name)
#if defined(ST7701_CS) || defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || \
defined(ST7789_CS) || defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(USE_ST7796) || \
defined(USE_SPISSD1306)
defined(ST7789_CS) || defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(ST7796_CS) || \
defined(USE_ST7796) || defined(USE_SPISSD1306) || defined(HACKADAY_COMMUNICATOR)
if (screen)
screen->setup();
#elif defined(ARCH_PORTDUINO)

View File

@@ -664,7 +664,8 @@ void NodeDB::installDefaultConfig(bool preserveKey = false)
config.bluetooth.fixed_pin = defaultBLEPin;
#if defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7789_CS) || \
defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(USE_SPISSD1306) || defined(USE_ST7796)
defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(USE_SPISSD1306) || \
defined(USE_ST7796) || defined(HACKADAY_COMMUNICATOR)
bool hasScreen = true;
#ifdef HELTEC_MESH_NODE_T114
uint32_t st7789_id = get_st7789_id(ST7789_NSS, ST7789_SCK, ST7789_SDA, ST7789_RS, ST7789_RESET);

View File

@@ -101,8 +101,6 @@
#define HW_VENDOR meshtastic_HardwareModel_T_WATCH_S3
#elif defined(GENIEBLOCKS)
#define HW_VENDOR meshtastic_HardwareModel_GENIEBLOCKS
#elif defined(PRIVATE_HW)
#define HW_VENDOR meshtastic_HardwareModel_PRIVATE_HW
#elif defined(NANO_G1)
#define HW_VENDOR meshtastic_HardwareModel_NANO_G1
#elif defined(M5STACK)
@@ -205,6 +203,8 @@
#define HW_VENDOR meshtastic_HardwareModel_M5STACK_C6L
#elif defined(HELTEC_WIRELESS_TRACKER_V2)
#define HW_VENDOR meshtastic_HardwareModel_HELTEC_WIRELESS_TRACKER_V2
#else
#define HW_VENDOR meshtastic_HardwareModel_PRIVATE_HW
#endif
// -----------------------------------------------------------------------------