From 8ff99437cb27fc2cc5a0c3f05a1f6e968fdf40dc Mon Sep 17 00:00:00 2001 From: Jonathan Bennett Date: Thu, 12 Jun 2025 22:56:40 -0500 Subject: [PATCH 01/23] Don't include the blank hash --- src/mesh/NodeDB.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/src/mesh/NodeDB.h b/src/mesh/NodeDB.h index 7e294f5b8..df1e8a7f6 100644 --- a/src/mesh/NodeDB.h +++ b/src/mesh/NodeDB.h @@ -61,9 +61,9 @@ static const uint8_t LOW_ENTROPY_HASH13[] = {0x09, 0xb4, 0xe2, 0x6d, 0x28, 0x98, static const uint8_t LOW_ENTROPY_HASH14[] = {0x39, 0x39, 0x84, 0xe0, 0x22, 0x2f, 0x7d, 0x78, 0x45, 0x18, 0x72, 0xb4, 0x13, 0xd2, 0x01, 0x2f, 0x3c, 0xa1, 0xb0, 0xfe, 0x39, 0xd0, 0xf1, 0x3c, 0x72, 0xd6, 0xef, 0x54, 0xd5, 0x77, 0x22, 0xa0}; -static const uint8_t LOW_ENTROPY_HASH15[] = {0xe3, 0xb0, 0xc4, 0x42, 0x98, 0xfc, 0x1c, 0x14, 0x9a, 0xfb, 0xf4, - 0xc8, 0x99, 0x6f, 0xb9, 0x24, 0x27, 0xae, 0x41, 0xe4, 0x64, 0x9b, - 0x93, 0x4c, 0xa4, 0x95, 0x99, 0x1b, 0x78, 0x52, 0xb8, 0x55}; +static const uint8_t LOW_ENTROPY_HASH15[] = {0x0a, 0xda, 0x5f, 0xec, 0xff, 0x5c, 0xc0, 0x2e, 0x5f, 0xc4, 0x8d, + 0x03, 0xe5, 0x80, 0x59, 0xd3, 0x5d, 0x49, 0x86, 0xe9, 0x8d, 0xf6, + 0xf6, 0x16, 0x35, 0x3d, 0xf9, 0x9b, 0x29, 0x55, 0x9e, 0x64}; static const char LOW_ENTROPY_WARNING[] = "Your Device is configured with a low entropy key. Suggest regenerating DM keys"; #endif /* From 5d0bf03b017905a7ac24a8c78beb699fb53bca6b Mon Sep 17 00:00:00 2001 From: Csrutil Date: Fri, 13 Jun 2025 15:27:48 +0800 Subject: [PATCH 02/23] add support for GAT562 Mesh Trial Tracker (#6984) * add support for GAT562 Mesh Trial Tracker * Hardware Model Definition for GAT562_MESH_TRIAL_TRACKER * Added RAK4630 for led pin 2 (blue) * Added RAK4630 for led pin 2 (blue) comment * don't touch src/mesh/NodeDB.cpp * set fixed baudrate for gat562_mesh_trial_tracker * adjust the order of the HW_VENDOR defines --------- Co-authored-by: Ben Meadors Co-authored-by: Tom Fifield --- boards/gat562_mesh_trial_tracker.json | 52 ++++ src/platform/nrf52/architecture.h | 4 +- .../gat562_mesh_trial_tracker/platformio.ini | 13 + .../gat562_mesh_trial_tracker/variant.cpp | 45 +++ variants/gat562_mesh_trial_tracker/variant.h | 288 ++++++++++++++++++ 5 files changed, 401 insertions(+), 1 deletion(-) create mode 100644 boards/gat562_mesh_trial_tracker.json create mode 100644 variants/gat562_mesh_trial_tracker/platformio.ini create mode 100644 variants/gat562_mesh_trial_tracker/variant.cpp create mode 100644 variants/gat562_mesh_trial_tracker/variant.h diff --git a/boards/gat562_mesh_trial_tracker.json b/boards/gat562_mesh_trial_tracker.json new file mode 100644 index 000000000..a3fb8a264 --- /dev/null +++ b/boards/gat562_mesh_trial_tracker.json @@ -0,0 +1,52 @@ +{ + "build": { + "arduino": { + "ldscript": "nrf52840_s140_v6.ld" + }, + "core": "nRF5", + "cpu": "cortex-m4", + "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA", + "f_cpu": "64000000L", + "hwids": [ + ["0x239A", "0x8029"], + ["0x239A", "0x0029"], + ["0x239A", "0x002A"], + ["0x239A", "0x802A"] + ], + "usb_product": "GAT562 Mesh Trial Tracker", + "mcu": "nrf52840", + "variant": "gat562_mesh_trial_tracker", + "bsp": { + "name": "adafruit" + }, + "softdevice": { + "sd_flags": "-DS140", + "sd_name": "s140", + "sd_version": "6.1.1", + "sd_fwid": "0x00B6" + }, + "bootloader": { + "settings_addr": "0xFF000" + } + }, + "connectivity": ["bluetooth"], + "debug": { + "jlink_device": "nRF52840_xxAA", + "svd_path": "nrf52840.svd", + "openocd_target": "nrf52840-mdk-rs" + }, + "frameworks": ["arduino", "freertos"], + "name": "GAT562 Mesh Trial Tracker", + "upload": { + "maximum_ram_size": 248832, + "maximum_size": 815104, + "speed": 115200, + "protocol": "nrfutil", + "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"], + "use_1200bps_touch": true, + "require_upload_port": true, + "wait_for_upload_port": true + }, + "url": "http://www.gat-iot.com/", + "vendor": "GAT-IOT" +} diff --git a/src/platform/nrf52/architecture.h b/src/platform/nrf52/architecture.h index 8ea2c3829..a69816d0b 100644 --- a/src/platform/nrf52/architecture.h +++ b/src/platform/nrf52/architecture.h @@ -49,6 +49,8 @@ #define HW_VENDOR meshtastic_HardwareModel_RAK2560 #elif defined(WISMESH_TAP) #define HW_VENDOR meshtastic_HardwareModel_WISMESH_TAP +#elif defined(GAT562_MESH_TRIAL_TRACKER) +#define HW_VENDOR meshtastic_HardwareModel_GAT562_MESH_TRIAL_TRACKER #elif defined(RAK4630) #define HW_VENDOR meshtastic_HardwareModel_RAK4631 #elif defined(TTGO_T_ECHO) @@ -141,4 +143,4 @@ #if !defined(PIN_SERIAL_RX) && !defined(NRF52840_XXAA) // No serial ports on this board - ONLY use segger in memory console #define USE_SEGGER -#endif \ No newline at end of file +#endif diff --git a/variants/gat562_mesh_trial_tracker/platformio.ini b/variants/gat562_mesh_trial_tracker/platformio.ini new file mode 100644 index 000000000..e67f3ec8d --- /dev/null +++ b/variants/gat562_mesh_trial_tracker/platformio.ini @@ -0,0 +1,13 @@ +; The very slick RAK wireless RAK 4631 / 4630 board - Unified firmware for 5005/19003, with or without OLED RAK 1921 +[env:gat562_mesh_trial_tracker] +extends = nrf52840_base +board = gat562_mesh_trial_tracker +board_check = true +build_flags = ${nrf52840_base.build_flags} -Ivariants/gat562_mesh_trial_tracker -D GAT562_MESH_TRIAL_TRACKER + -DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely. + -DRADIOLIB_EXCLUDE_SX128X=1 + -DRADIOLIB_EXCLUDE_SX127X=1 + -DRADIOLIB_EXCLUDE_LR11X0=1 +build_src_filter = ${nrf52_base.build_src_filter} +<../variants/gat562_mesh_trial_tracker> +lib_deps = + ${nrf52840_base.lib_deps} diff --git a/variants/gat562_mesh_trial_tracker/variant.cpp b/variants/gat562_mesh_trial_tracker/variant.cpp new file mode 100644 index 000000000..e84b60b3b --- /dev/null +++ b/variants/gat562_mesh_trial_tracker/variant.cpp @@ -0,0 +1,45 @@ +/* + Copyright (c) 2014-2015 Arduino LLC. All right reserved. + Copyright (c) 2016 Sandeep Mistry All right reserved. + Copyright (c) 2018, Adafruit Industries (adafruit.com) + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#include "variant.h" +#include "nrf.h" +#include "wiring_constants.h" +#include "wiring_digital.h" + +const uint32_t g_ADigitalPinMap[] = { + // P0 + 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, + + // P1 + 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47}; + +void initVariant() +{ + // LED1 & LED2 + pinMode(PIN_LED1, OUTPUT); + ledOff(PIN_LED1); + + pinMode(PIN_LED2, OUTPUT); + ledOff(PIN_LED2); + + // 3V3 Power Rail + pinMode(PIN_3V3_EN, OUTPUT); + digitalWrite(PIN_3V3_EN, HIGH); +} diff --git a/variants/gat562_mesh_trial_tracker/variant.h b/variants/gat562_mesh_trial_tracker/variant.h new file mode 100644 index 000000000..2af0bc76d --- /dev/null +++ b/variants/gat562_mesh_trial_tracker/variant.h @@ -0,0 +1,288 @@ +/* + Copyright (c) 2014-2015 Arduino LLC. All right reserved. + Copyright (c) 2016 Sandeep Mistry All right reserved. + Copyright (c) 2018, Adafruit Industries (adafruit.com) + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef _VARIANT_GAT562_MESH_TRIAL_TRACKER_ +#define _VARIANT_GAT562_MESH_TRIAL_TRACKER_ + +#define GAT562_MESH_TRIAL_TRACKER + +// led pin 2 (blue), see https://github.com/meshtastic/firmware/blob/master/src/mesh/NodeDB.cpp#L723 +#define RAK4630 + +/** Master clock frequency */ +#define VARIANT_MCK (64000000ul) + +#define USE_LFXO // Board uses 32khz crystal for LF +// define USE_LFRC // Board uses RC for LF + +/*---------------------------------------------------------------------------- + * Headers + *----------------------------------------------------------------------------*/ + +#include "WVariant.h" + +#ifdef __cplusplus +extern "C" { +#endif // __cplusplus + +// Number of pins defined in PinDescription array +#define PINS_COUNT (48) +#define NUM_DIGITAL_PINS (48) +#define NUM_ANALOG_INPUTS (6) +#define NUM_ANALOG_OUTPUTS (0) + +// LEDs +#define PIN_LED1 (35) +#define PIN_LED2 (36) + +#define LED_BUILTIN PIN_LED1 +#define LED_CONN PIN_LED2 + +#define LED_GREEN PIN_LED1 +#define LED_BLUE PIN_LED2 + +#define LED_STATE_ON 1 // State when LED is litted + +/* + * Buttons + */ + +#define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion +#define BUTTON_NEED_PULLUP +#define PIN_BUTTON2 12 +#define PIN_BUTTON3 24 +#define PIN_BUTTON4 25 + +/* + * Analog pins + */ +#define PIN_A0 (5) +#define PIN_A1 (31) +#define PIN_A2 (28) +#define PIN_A3 (29) +#define PIN_A4 (30) +#define PIN_A5 (31) +#define PIN_A6 (0xff) +#define PIN_A7 (0xff) + +static const uint8_t A0 = PIN_A0; +static const uint8_t A1 = PIN_A1; +static const uint8_t A2 = PIN_A2; +static const uint8_t A3 = PIN_A3; +static const uint8_t A4 = PIN_A4; +static const uint8_t A5 = PIN_A5; +static const uint8_t A6 = PIN_A6; +static const uint8_t A7 = PIN_A7; +#define ADC_RESOLUTION 14 + +// Other pins +#define PIN_AREF (2) +#define PIN_NFC1 (9) +#define PIN_NFC2 (10) + +static const uint8_t AREF = PIN_AREF; + +/* + * Serial interfaces + */ +#define PIN_SERIAL1_RX (15) +#define PIN_SERIAL1_TX (16) + +// Connected to Jlink CDC +#define PIN_SERIAL2_RX (8) +#define PIN_SERIAL2_TX (6) + +/* + * SPI Interfaces + */ +#define SPI_INTERFACES_COUNT 2 + +#define PIN_SPI_MISO (45) +#define PIN_SPI_MOSI (44) +#define PIN_SPI_SCK (43) + +#define PIN_SPI1_MISO (29) // (0 + 29) +#define PIN_SPI1_MOSI (30) // (0 + 30) +#define PIN_SPI1_SCK (3) // (0 + 3) + +static const uint8_t SS = 42; +static const uint8_t MOSI = PIN_SPI_MOSI; +static const uint8_t MISO = PIN_SPI_MISO; +static const uint8_t SCK = PIN_SPI_SCK; + +/* + * eink display pins + */ + +// #define PIN_EINK_CS (0 + 26) +// #define PIN_EINK_BUSY (0 + 4) +// #define PIN_EINK_DC (0 + 17) +// #define PIN_EINK_RES (-1) +// #define PIN_EINK_SCLK (0 + 3) +// #define PIN_EINK_MOSI (0 + 30) // also called SDI + +// #define USE_EINK + +// Display - OLED connected via I2C +#define HAS_SCREEN 1 +#define USE_SSD1306 + +// RAKRGB +// #define HAS_NCP5623 + +/* + * Wire Interfaces + */ +#define WIRE_INTERFACES_COUNT 1 + +#define PIN_WIRE_SDA (13) +#define PIN_WIRE_SCL (14) + +// QSPI Pins +#define PIN_QSPI_SCK 3 +#define PIN_QSPI_CS 26 +#define PIN_QSPI_IO0 30 +#define PIN_QSPI_IO1 29 +#define PIN_QSPI_IO2 28 +#define PIN_QSPI_IO3 2 + +// On-board QSPI Flash +#define EXTERNAL_FLASH_DEVICES IS25LP080D +#define EXTERNAL_FLASH_USE_QSPI + +/* @note RAK5005-O GPIO mapping to RAK4631 GPIO ports + RAK5005-O <-> nRF52840 + IO1 <-> P0.17 (Arduino GPIO number 17) + IO2 <-> P1.02 (Arduino GPIO number 34) + IO3 <-> P0.21 (Arduino GPIO number 21) + IO4 <-> P0.04 (Arduino GPIO number 4) + IO5 <-> P0.09 (Arduino GPIO number 9) + IO6 <-> P0.10 (Arduino GPIO number 10) + IO7 <-> P0.28 (Arduino GPIO number 28) + SW1 <-> P0.01 (Arduino GPIO number 1) + A0 <-> P0.04/AIN2 (Arduino Analog A2 + A1 <-> P0.31/AIN7 (Arduino Analog A7 + SPI_CS <-> P0.26 (Arduino GPIO number 26) + */ + +// RAK4630 LoRa module + +/* Setup of the SX1262 LoRa module ( https://docs.rakwireless.com/Product-Categories/WisBlock/RAK4631/Datasheet/ ) + +P1.10 NSS SPI NSS (Arduino GPIO number 42) +P1.11 SCK SPI CLK (Arduino GPIO number 43) +P1.12 MOSI SPI MOSI (Arduino GPIO number 44) +P1.13 MISO SPI MISO (Arduino GPIO number 45) +P1.14 BUSY BUSY signal (Arduino GPIO number 46) +P1.15 DIO1 DIO1 event interrupt (Arduino GPIO number 47) +P1.06 NRESET NRESET manual reset of the SX1262 (Arduino GPIO number 38) + +Important for successful SX1262 initialization: + +* Setup DIO2 to control the antenna switch +* Setup DIO3 to control the TCXO power supply +* Setup the SX1262 to use it's DCDC regulator and not the LDO +* RAK4630 schematics show GPIO P1.07 connected to the antenna switch, but it should not be initialized, as DIO2 will do the +control of the antenna switch + +SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG + +*/ + +// configure the SET pin on the RAK12039 sensor board to disable the sensor while not reading +// air quality telemetry. PIN_NFC2 doesn't seem to be used anywhere else in the codebase, but if +// you're having problems with your node behaving weirdly when a RAK12039 board isn't connected, +// try disabling this. +// #define PMSA003I_ENABLE_PIN PIN_NFC2 + +// #define DETECTION_SENSOR_EN 4 + +#define USE_SX1262 +#define SX126X_CS (42) +#define SX126X_DIO1 (47) +#define SX126X_BUSY (46) +#define SX126X_RESET (38) +// #define SX126X_TXEN (39) +// #define SX126X_RXEN (37) +#define SX126X_POWER_EN (37) +// DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3 +#define SX126X_DIO2_AS_RF_SWITCH +#define SX126X_DIO3_TCXO_VOLTAGE 1.8 + +// Testing USB detection +#define NRF_APM + +// enables 3.3V periphery like GPS or IO Module +// Do not toggle this for GPS power savings +#define PIN_3V3_EN (34) + +// RAK1910 GPS module +// If using the wisblock GPS module and pluged into Port A on WisBlock base +// IO1 is hooked to PPS (pin 12 on header) = gpio 17 +// IO2 is hooked to GPS RESET = gpio 34, but it can not be used to this because IO2 is ALSO used to control 3V3_S power (1 is on). +// Therefore must be 1 to keep peripherals powered +// Power is on the controllable 3V3_S rail +// #define PIN_GPS_RESET (34) +// #define PIN_GPS_EN PIN_3V3_EN +#define PIN_GPS_PPS (17) // Pulse per second input from the GPS + +#define GPS_BAUDRATE 9600 + +#define GPS_RX_PIN PIN_SERIAL1_RX +#define GPS_TX_PIN PIN_SERIAL1_TX + +// Define pin to enable GPS toggle (set GPIO to LOW) via user button triple press + +// RAK12002 RTC Module +// #define RV3028_RTC (uint8_t)0b1010010 + +// RAK18001 Buzzer in Slot C +// #define PIN_BUZZER 21 // IO3 is PWM2 +// NEW: set this via protobuf instead! + +// Battery +// The battery sense is hooked to pin A0 (5) +#define BATTERY_PIN PIN_A0 +// and has 12 bit resolution +#define BATTERY_SENSE_RESOLUTION_BITS 12 +#define BATTERY_SENSE_RESOLUTION 4096.0 +#undef AREF_VOLTAGE +#define AREF_VOLTAGE 3.0 +#define VBAT_AR_INTERNAL AR_INTERNAL_3_0 +#define ADC_MULTIPLIER 1.73 + +// #define HAS_RTC 1 + +// #define HAS_ETHERNET 1 + +// #define RAK_4631 1 + +// #define PIN_ETHERNET_RESET 21 +// #define PIN_ETHERNET_SS PIN_EINK_CS +// #define ETH_SPI_PORT SPI1 +// #define AQ_SET_PIN 10 + +#ifdef __cplusplus +} +#endif + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#endif From cc0fbfbd21354115d2eb5b0c2b5a66438dca248f Mon Sep 17 00:00:00 2001 From: Ben Meadors Date: Fri, 13 Jun 2025 06:59:05 -0500 Subject: [PATCH 03/23] Fixed breaking of inkhud / tft suffix convention --- variants/heltec_mesh_pocket/platformio.ini | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/variants/heltec_mesh_pocket/platformio.ini b/variants/heltec_mesh_pocket/platformio.ini index 6632c10fe..2f3886887 100644 --- a/variants/heltec_mesh_pocket/platformio.ini +++ b/variants/heltec_mesh_pocket/platformio.ini @@ -28,7 +28,7 @@ lib_deps = https://github.com/meshtastic/GxEPD2#b202ebfec6a4821e098cf7a625ba0f6f2400292d -[env:heltec-mesh-pocket-inkhud-5000] +[env:heltec-mesh-pocket-5000-inkhud] extends = nrf52840_base, inkhud board = heltec_mesh_pocket build_src_filter = ${nrf52_base.build_src_filter} +<../variants/heltec_mesh_pocket> ${inkhud.build_src_filter} @@ -73,7 +73,7 @@ lib_deps = https://github.com/meshtastic/GxEPD2#b202ebfec6a4821e098cf7a625ba0f6f2400292d -[env:heltec-mesh-pocket-inkhud-10000] +[env:heltec-mesh-pocket-10000-inkhud] extends = nrf52840_base, inkhud board = heltec_mesh_pocket build_src_filter = ${nrf52_base.build_src_filter} +<../variants/heltec_mesh_pocket> ${inkhud.build_src_filter} From 691917b956d3cfc349063542447585ce645bf8ab Mon Sep 17 00:00:00 2001 From: Jonathan Bennett Date: Sat, 14 Jun 2025 09:59:25 -0500 Subject: [PATCH 04/23] Add config for RAK 13300 on RAK6421 (#7037) --- bin/config.d/lora-RAK6421.yaml | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 bin/config.d/lora-RAK6421.yaml diff --git a/bin/config.d/lora-RAK6421.yaml b/bin/config.d/lora-RAK6421.yaml new file mode 100644 index 000000000..bbf38a474 --- /dev/null +++ b/bin/config.d/lora-RAK6421.yaml @@ -0,0 +1,21 @@ +Lora: + + ### RAK13300in Slot 1 + Module: sx1262 + IRQ: 22 #IO6 + Reset: 16 # IO4 + Busy: 24 # IO5 + # Ant_sw: 13 # IO3 + DIO3_TCXO_VOLTAGE: true + DIO2_AS_RF_SWITCH: true + spidev: spidev0.0 + # CS: 8 + + + ### RAK13300in Slot 2 pins +# IRQ: 18 #IO6 +# Reset: 24 # IO4 +# Busy: 19 # IO5 +# # Ant_sw: 23 # IO3 +# spidev: spidev0.1 +# # CS: 7 \ No newline at end of file From 1557219bad0249fc5745657716ac8826cf033c0b Mon Sep 17 00:00:00 2001 From: Jonathan Bennett Date: Sat, 14 Jun 2025 17:09:22 -0500 Subject: [PATCH 05/23] =?UTF-8?q?More=20low-entropy=20keys,=20and=20don't?= =?UTF-8?q?=20issue=20a=20false=20warning=20when=20changing=20=E2=80=A6=20?= =?UTF-8?q?(#7041)?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit * More low-entropy keys, and don't issue a false warning when changing node name * CopyPasta Wasn't Tasty * When the phone sets the publickey size to 0, regenerate right away --- src/mesh/NodeDB.cpp | 12 +++++++++--- src/mesh/NodeDB.h | 15 +++++++++++++++ src/modules/AdminModule.cpp | 15 ++++++++++----- 3 files changed, 34 insertions(+), 8 deletions(-) diff --git a/src/mesh/NodeDB.cpp b/src/mesh/NodeDB.cpp index 9ee430242..f923c210d 100644 --- a/src/mesh/NodeDB.cpp +++ b/src/mesh/NodeDB.cpp @@ -1567,7 +1567,7 @@ bool NodeDB::updateUser(uint32_t nodeId, meshtastic_User &p, uint8_t channelInde } #if !(MESHTASTIC_EXCLUDE_PKI) - if (p.public_key.size == 32) { + if (p.public_key.size == 32 && nodeId != nodeDB->getNodeNum()) { printBytes("Incoming Pubkey: ", p.public_key.bytes, 32); // Alert the user if a remote node is advertising public key that matches our own @@ -1763,7 +1763,8 @@ bool NodeDB::checkLowEntropyPublicKey(const meshtastic_Config_SecurityConfig_pub uint8_t keyHash[32] = {0}; memcpy(keyHash, keyToTest.bytes, keyToTest.size); crypto->hash(keyHash, 32); - if (memcmp(keyHash, LOW_ENTROPY_HASH1, sizeof(LOW_ENTROPY_HASH1)) == 0 || + if (memcmp(keyHash, LOW_ENTROPY_HASH1, sizeof(LOW_ENTROPY_HASH1)) == + 0 || // should become an array that gets looped through rather than this abomination memcmp(keyHash, LOW_ENTROPY_HASH2, sizeof(LOW_ENTROPY_HASH2)) == 0 || memcmp(keyHash, LOW_ENTROPY_HASH3, sizeof(LOW_ENTROPY_HASH3)) == 0 || memcmp(keyHash, LOW_ENTROPY_HASH4, sizeof(LOW_ENTROPY_HASH4)) == 0 || @@ -1777,7 +1778,12 @@ bool NodeDB::checkLowEntropyPublicKey(const meshtastic_Config_SecurityConfig_pub memcmp(keyHash, LOW_ENTROPY_HASH12, sizeof(LOW_ENTROPY_HASH12)) == 0 || memcmp(keyHash, LOW_ENTROPY_HASH13, sizeof(LOW_ENTROPY_HASH13)) == 0 || memcmp(keyHash, LOW_ENTROPY_HASH14, sizeof(LOW_ENTROPY_HASH14)) == 0 || - memcmp(keyHash, LOW_ENTROPY_HASH15, sizeof(LOW_ENTROPY_HASH15)) == 0) { + memcmp(keyHash, LOW_ENTROPY_HASH15, sizeof(LOW_ENTROPY_HASH15)) == 0 || + memcmp(keyHash, LOW_ENTROPY_HASH16, sizeof(LOW_ENTROPY_HASH16)) == 0 || + memcmp(keyHash, LOW_ENTROPY_HASH17, sizeof(LOW_ENTROPY_HASH17)) == 0 || + memcmp(keyHash, LOW_ENTROPY_HASH18, sizeof(LOW_ENTROPY_HASH18)) == 0 || + memcmp(keyHash, LOW_ENTROPY_HASH19, sizeof(LOW_ENTROPY_HASH19)) == 0 || + memcmp(keyHash, LOW_ENTROPY_HASH20, sizeof(LOW_ENTROPY_HASH20)) == 0) { return true; } } diff --git a/src/mesh/NodeDB.h b/src/mesh/NodeDB.h index df1e8a7f6..9e77844f0 100644 --- a/src/mesh/NodeDB.h +++ b/src/mesh/NodeDB.h @@ -64,6 +64,21 @@ static const uint8_t LOW_ENTROPY_HASH14[] = {0x39, 0x39, 0x84, 0xe0, 0x22, 0x2f, static const uint8_t LOW_ENTROPY_HASH15[] = {0x0a, 0xda, 0x5f, 0xec, 0xff, 0x5c, 0xc0, 0x2e, 0x5f, 0xc4, 0x8d, 0x03, 0xe5, 0x80, 0x59, 0xd3, 0x5d, 0x49, 0x86, 0xe9, 0x8d, 0xf6, 0xf6, 0x16, 0x35, 0x3d, 0xf9, 0x9b, 0x29, 0x55, 0x9e, 0x64}; +static const uint8_t LOW_ENTROPY_HASH16[] = {0x08, 0x56, 0xF0, 0xD7, 0xEF, 0x77, 0xD6, 0x11, 0x1C, 0x8F, 0x95, + 0x2D, 0x3C, 0xDF, 0xB1, 0x22, 0xBF, 0x60, 0x9B, 0xE5, 0xA9, 0xC0, + 0x6E, 0x4B, 0x01, 0xDC, 0xD1, 0x57, 0x44, 0xB2, 0xA5, 0xCF}; +static const uint8_t LOW_ENTROPY_HASH17[] = {0x2C, 0xB2, 0x77, 0x85, 0xD6, 0xB7, 0x48, 0x9C, 0xFE, 0xBC, 0x80, + 0x26, 0x60, 0xF4, 0x6D, 0xCE, 0x11, 0x31, 0xA2, 0x1E, 0x33, 0x0A, + 0x6D, 0x2B, 0x00, 0xFA, 0x0C, 0x90, 0x95, 0x8F, 0x5C, 0x6B}; +static const uint8_t LOW_ENTROPY_HASH18[] = {0xFA, 0x59, 0xC8, 0x6E, 0x94, 0xEE, 0x75, 0xC9, 0x9A, 0xB0, 0xFE, + 0x89, 0x36, 0x40, 0xC9, 0x99, 0x4A, 0x3B, 0xF4, 0xAA, 0x12, 0x24, + 0xA2, 0x0F, 0xF9, 0xD1, 0x08, 0xCB, 0x78, 0x19, 0xAA, 0xE5}; +static const uint8_t LOW_ENTROPY_HASH19[] = {0x6E, 0x42, 0x7A, 0x4A, 0x8C, 0x61, 0x62, 0x22, 0xA1, 0x89, 0xD3, + 0xA4, 0xC2, 0x19, 0xA3, 0x83, 0x53, 0xA7, 0x7A, 0x0A, 0x89, 0xE2, + 0x54, 0x52, 0x62, 0x3D, 0xE7, 0xCA, 0x8C, 0xF6, 0x6A, 0x60}; +static const uint8_t LOW_ENTROPY_HASH20[] = {0x20, 0x27, 0x2F, 0xBA, 0x0C, 0x99, 0xD7, 0x29, 0xF3, 0x11, 0x35, + 0x89, 0x9D, 0x0E, 0x24, 0xA1, 0xC3, 0xCB, 0xDF, 0x8A, 0xF1, 0xC6, + 0xFE, 0xD0, 0xD7, 0x9F, 0x92, 0xD6, 0x8F, 0x59, 0xBF, 0xE4}; static const char LOW_ENTROPY_WARNING[] = "Your Device is configured with a low entropy key. Suggest regenerating DM keys"; #endif /* diff --git a/src/modules/AdminModule.cpp b/src/modules/AdminModule.cpp index ea4c46949..551602f00 100644 --- a/src/modules/AdminModule.cpp +++ b/src/modules/AdminModule.cpp @@ -722,11 +722,16 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c) LOG_INFO("Set config: Security"); config.security = c.payload_variant.security; #if !(MESHTASTIC_EXCLUDE_PKI_KEYGEN) && !(MESHTASTIC_EXCLUDE_PKI) - // We check for a potentially valid private key, and a blank public key, and regen the public key if needed. - if (config.security.private_key.size == 32 && !memfll(config.security.private_key.bytes, 0, 32) && - (config.security.public_key.size == 0 || memfll(config.security.public_key.bytes, 0, 32))) { - if (crypto->regeneratePublicKey(config.security.public_key.bytes, config.security.private_key.bytes)) { - config.security.public_key.size = 32; + // If the client set the key to blank, go ahead and regenerate so long as we're not in ham mode + if (!owner.is_licensed && config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_UNSET) { + if (config.security.private_key.size != 32) { + crypto->generateKeyPair(config.security.public_key.bytes, config.security.private_key.bytes); + + } else if (config.security.public_key.size != 32) { + // We check for a potentially valid private key, and a blank public key, and regen the public key if needed. + if (crypto->regeneratePublicKey(config.security.public_key.bytes, config.security.private_key.bytes)) { + config.security.public_key.size = 32; + } } } #endif From 425f384b1fe0e107ec517f8b177b4ee6560d8ae6 Mon Sep 17 00:00:00 2001 From: todd-herbert Date: Sun, 15 Jun 2025 11:39:46 +1200 Subject: [PATCH 06/23] InkHUD DIY builds for ProMicro & Heltec T114 (#7039) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit * DIY InkHUD variants (ProMicro & T114) * Fix file encoding > We’ve detected the file encoding as ISO-8859-1. When you commit changes we will transcode it to UTF-8. * Update comment justifying trunk suppression --- .../custom_build_tasks.py | 62 +++++++ .../nrf52_promicro_diy_tcxo/nicheGraphics.h | 94 ++++++++++ .../diy/nrf52_promicro_diy_tcxo/variant.h | 44 +++-- variants/diy/platformio.ini | 21 +++ .../custom_build_tasks.py | 62 +++++++ .../nicheGraphics.h | 94 ++++++++++ .../platformio.ini | 19 ++ .../heltec_mesh_node_t114-inkhud/variant.cpp | 38 ++++ .../heltec_mesh_node_t114-inkhud/variant.h | 175 ++++++++++++++++++ 9 files changed, 590 insertions(+), 19 deletions(-) create mode 100644 variants/diy/nrf52_promicro_diy_tcxo/custom_build_tasks.py create mode 100644 variants/diy/nrf52_promicro_diy_tcxo/nicheGraphics.h create mode 100644 variants/heltec_mesh_node_t114-inkhud/custom_build_tasks.py create mode 100644 variants/heltec_mesh_node_t114-inkhud/nicheGraphics.h create mode 100644 variants/heltec_mesh_node_t114-inkhud/platformio.ini create mode 100644 variants/heltec_mesh_node_t114-inkhud/variant.cpp create mode 100644 variants/heltec_mesh_node_t114-inkhud/variant.h diff --git a/variants/diy/nrf52_promicro_diy_tcxo/custom_build_tasks.py b/variants/diy/nrf52_promicro_diy_tcxo/custom_build_tasks.py new file mode 100644 index 000000000..00896e21f --- /dev/null +++ b/variants/diy/nrf52_promicro_diy_tcxo/custom_build_tasks.py @@ -0,0 +1,62 @@ +# Simplifies DIY InkHUD builds, with presets for several common E-Ink displays +# - build using custom task in Platformio's "Project Tasks" panel +# - build with `pio run -e -t build_weact_154` (or similar) + +# Silence trunk's objections to the import statements +# trunk-ignore-all(ruff/F821) +# trunk-ignore-all(flake8/F821) + +from SCons.Script import COMMAND_LINE_TARGETS + +Import("env") +Import("projenv") + +# Custom targets +# These wrappers just run the normal build task under a different target name +# We intercept the build later on, based on the target name +env.AddTarget( + name="build_weact_154", + dependencies=["buildprog"], + actions=None, + title='Build (WeAct 1.54")', +) +env.AddTarget( + name="build_weact_213", + dependencies=["buildprog"], + actions=None, + title='Build (WeAct 2.13")', +) +env.AddTarget( + name="build_weact_290", + dependencies=["buildprog"], + actions=None, + title='Build (WeAct 2.9")', +) +env.AddTarget( + name="build_weact_420", + dependencies=["buildprog"], + actions=None, + title='Build (WeAct 4.2")', +) + +# Check whether a build was started via one of our custom targets above + +if "build_weact_154" in COMMAND_LINE_TARGETS: + print('Building for WeAct 1.54" Display') + projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DRIVER", "ZJY200200_0154DAAMFGN")) + projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DISPLAYRESILIENCE", "15")) + +elif "build_weact_213" in COMMAND_LINE_TARGETS: + print('Building for WeAct 2.13" Display') + projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DRIVER", "HINK_E0213A289")) + projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DISPLAYRESILIENCE", "10")) + +elif "build_weact_290" in COMMAND_LINE_TARGETS: + print('Building for WeAct 2.9" Display') + projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DRIVER", "ZJY128296_029EAAMFGN")) + projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DISPLAYRESILIENCE", "15")) + +elif "build_weact_420" in COMMAND_LINE_TARGETS: + print('Building for WeAct 4.2" Display') + projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DRIVER", "HINK_E042A87")) + projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DISPLAYRESILIENCE", "15")) diff --git a/variants/diy/nrf52_promicro_diy_tcxo/nicheGraphics.h b/variants/diy/nrf52_promicro_diy_tcxo/nicheGraphics.h new file mode 100644 index 000000000..bbd530595 --- /dev/null +++ b/variants/diy/nrf52_promicro_diy_tcxo/nicheGraphics.h @@ -0,0 +1,94 @@ +#pragma once + +#include "configuration.h" + +#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS + +// InkHUD-specific components +// --------------------------- +#include "graphics/niche/InkHUD/InkHUD.h" + +// Applets +#include "graphics/niche/InkHUD/Applets/User/AllMessage/AllMessageApplet.h" +#include "graphics/niche/InkHUD/Applets/User/DM/DMApplet.h" +#include "graphics/niche/InkHUD/Applets/User/Heard/HeardApplet.h" +#include "graphics/niche/InkHUD/Applets/User/Positions/PositionsApplet.h" +#include "graphics/niche/InkHUD/Applets/User/RecentsList/RecentsListApplet.h" +#include "graphics/niche/InkHUD/Applets/User/ThreadedMessage/ThreadedMessageApplet.h" + +// Shared NicheGraphics components +// -------------------------------- +#include "graphics/niche/Drivers/EInk/HINK_E0213A289.h" // WeAct 2.13" +#include "graphics/niche/Drivers/EInk/HINK_E042A87.h" // WeAct 4.2" +#include "graphics/niche/Drivers/EInk/ZJY128296_029EAAMFGN.h" // WeAct 2.9" +#include "graphics/niche/Drivers/EInk/ZJY200200_0154DAAMFGN.h" // WeACt 1.54" + +#include "graphics/niche/Inputs/TwoButton.h" + +#if !defined(INKHUD_BUILDCONF_DRIVER) || !defined(INKHUD_BUILDCONF_DISPLAYRESILIENCE) +#error If not using a DIY preset, display model and resilience must be set manually +#endif + +void setupNicheGraphics() +{ + using namespace NicheGraphics; + + // SPI + // ----------------------------- + SPI.begin(); + + // Driver + // ----------------------------- + + // Use E-Ink driver + Drivers::EInk *driver = new Drivers::INKHUD_BUILDCONF_DRIVER; + driver->begin(&SPI, PIN_EINK_DC, PIN_EINK_CS, PIN_EINK_BUSY, PIN_EINK_RES); + + // InkHUD + // ---------------------------- + + InkHUD::InkHUD *inkhud = InkHUD::InkHUD::getInstance(); + + // Set the driver + inkhud->setDriver(driver); + + // Set how many FAST updates per FULL update. + inkhud->setDisplayResilience(INKHUD_BUILDCONF_DISPLAYRESILIENCE); // Suggest roughly ten + + // Prepare fonts + InkHUD::Applet::fontLarge = FREESANS_9PT_WIN1252; + InkHUD::Applet::fontSmall = FREESANS_6PT_WIN1252; + + // Init settings, and customize defaults + // Values ignored individually if found saved to flash + inkhud->persistence->settings.rotation = (driver->height > driver->width ? 1 : 0); // Rotate 90deg to landscape, if needed + inkhud->persistence->settings.userTiles.maxCount = 4; + inkhud->persistence->settings.optionalFeatures.batteryIcon = true; + + // Pick applets + // Note: order of applets determines priority of "auto-show" feature + inkhud->addApplet("All Messages", new InkHUD::AllMessageApplet); + inkhud->addApplet("DMs", new InkHUD::DMApplet, true, false, 3); // Default on tile 3 + inkhud->addApplet("Channel 0", new InkHUD::ThreadedMessageApplet(0), true, false, 2); // Default on tile 2 + inkhud->addApplet("Channel 1", new InkHUD::ThreadedMessageApplet(1)); + inkhud->addApplet("Positions", new InkHUD::PositionsApplet, true, false, 1); // Default on tile 1 + inkhud->addApplet("Recents List", new InkHUD::RecentsListApplet, true, false, 0); // Default on tile 0 + inkhud->addApplet("Heard", new InkHUD::HeardApplet, true); // Background + + // Start running InkHUD + inkhud->begin(); + + // Buttons + // -------------------------- + + Inputs::TwoButton *buttons = Inputs::TwoButton::getInstance(); // Shared NicheGraphics component + + // Setup the main user button + buttons->setWiring(0, Inputs::TwoButton::getUserButtonPin(), true); // Internal pull up + buttons->setHandlerShortPress(0, [inkhud]() { inkhud->shortpress(); }); + buttons->setHandlerLongPress(0, [inkhud]() { inkhud->longpress(); }); + + buttons->start(); +} + +#endif \ No newline at end of file diff --git a/variants/diy/nrf52_promicro_diy_tcxo/variant.h b/variants/diy/nrf52_promicro_diy_tcxo/variant.h index de49018f4..e93442c7e 100644 --- a/variants/diy/nrf52_promicro_diy_tcxo/variant.h +++ b/variants/diy/nrf52_promicro_diy_tcxo/variant.h @@ -22,26 +22,26 @@ extern "C" { /* NRF52 PRO MICRO PIN ASSIGNMENT -| Pin | Function | | Pin | Function | RF95 | +| Pin   | Function   |   | Pin     | Function     | RF95 | | ----- | ----------- | --- | -------- | ------------ | ----- | -| Gnd | | | vbat | | | -| P0.06 | Serial2 RX | | vbat | | | -| P0.08 | Serial2 TX | | Gnd | | | -| Gnd | | | reset | | | -| Gnd | | | ext_vcc | *see 0.13 | | -| P0.17 | RXEN | | P0.31 | BATTERY_PIN | | -| P0.20 | GPS_RX | | P0.29 | BUSY | DIO0 | -| P0.22 | GPS_TX | | P0.02 | MISO | MISO | -| P0.24 | GPS_EN | | P1.15 | MOSI | MOSI | -| P1.00 | BUTTON_PIN | | P1.13 | CS | CS | -| P0.11 | SCL | | P1.11 | SCK | SCK | -| P1.04 | SDA | | P0.10 | DIO1/IRQ | DIO1 | -| P1.06 | Free pin | | P0.09 | RESET | RST | -| | | | | | | -| | Mid board | | | Internal | | -| P1.01 | Free pin | | 0.15 | LED | | -| P1.02 | Free pin | | 0.13 | 3V3_EN | | -| P1.07 | Free pin | | | | | +| Gnd   |             |   | vbat     |             | | +| P0.06 | Serial2 RX |   | vbat     |             | | +| P0.08 | Serial2 TX |   | Gnd     |             | | +| Gnd   |             |   | reset   |             | | +| Gnd   |             |   | ext_vcc | *see 0.13   | | +| P0.17 | RXEN       |   | P0.31   | BATTERY_PIN | | +| P0.20 | GPS_RX     |   | P0.29   | BUSY         | DIO0 | +| P0.22 | GPS_TX     |   | P0.02   | MISO | MISO | +| P0.24 | GPS_EN     |   | P1.15   | MOSI         | MOSI | +| P1.00 | BUTTON_PIN |   | P1.13   | CS           | CS   | +| P0.11 | SCL         |   | P1.11   | SCK         | SCK | +| P1.04 | SDA         |   | P0.10   | DIO1/IRQ     | DIO1 | +| P1.06 | Free pin   |   | P0.09   | RESET       | RST | +|       |             |   |         |             | | +|       | Mid board   |   |         | Internal     | | +| P1.01 | Free pin   |   | 0.15     | LED         | | +| P1.02 | Free pin   |   | 0.13     | 3V3_EN       | | +| P1.07 | Free pin   |   |         |             | | */ // Number of pins defined in PinDescription array @@ -185,6 +185,12 @@ settings. #define SX126X_DIO3_TCXO_VOLTAGE 1.8 #define TCXO_OPTIONAL // make it so that the firmware can try both TCXO and XTAL +// E-Ink DIY +#define PIN_EINK_CS (32 + 7) +#define PIN_EINK_DC (32 + 2) +#define PIN_EINK_RES (32 + 1) +#define PIN_EINK_BUSY (32 + 6) + #ifdef __cplusplus } #endif diff --git a/variants/diy/platformio.ini b/variants/diy/platformio.ini index d8ceee9cc..24ea9cc9d 100644 --- a/variants/diy/platformio.ini +++ b/variants/diy/platformio.ini @@ -68,6 +68,27 @@ lib_deps = ${nrf52840_base.lib_deps} debug_tool = jlink +; NRF52 ProMicro w/ E-Ink display +[env:nrf52_promicro_diy-inkhud] +board_level = extra +extends = nrf52840_base, inkhud +board = promicro-nrf52840 +build_flags = + ${nrf52840_base.build_flags} + ${inkhud.build_flags} + -I variants/diy/nrf52_promicro_diy_tcxo + -D NRF52_PROMICRO_DIY +build_src_filter = + ${nrf52_base.build_src_filter} + ${inkhud.build_src_filter} + +<../variants/diy/nrf52_promicro_diy_tcxo> +lib_deps = + ${inkhud.lib_deps} ; InkHUD libs first, so we get GFXRoot instead of AdafruitGFX + ${nrf52840_base.lib_deps} +extra_scripts = + ${env.extra_scripts} + variants/diy/nrf52_promicro_diy_tcxo/custom_build_tasks.py ; Add to PIO's Project Tasks pane: preset builds for common displays + ; Seeed XIAO nRF52840 + XIAO Wio SX1262 DIY [env:seeed-xiao-nrf52840-wio-sx1262] board = xiao_ble_sense diff --git a/variants/heltec_mesh_node_t114-inkhud/custom_build_tasks.py b/variants/heltec_mesh_node_t114-inkhud/custom_build_tasks.py new file mode 100644 index 000000000..00896e21f --- /dev/null +++ b/variants/heltec_mesh_node_t114-inkhud/custom_build_tasks.py @@ -0,0 +1,62 @@ +# Simplifies DIY InkHUD builds, with presets for several common E-Ink displays +# - build using custom task in Platformio's "Project Tasks" panel +# - build with `pio run -e -t build_weact_154` (or similar) + +# Silence trunk's objections to the import statements +# trunk-ignore-all(ruff/F821) +# trunk-ignore-all(flake8/F821) + +from SCons.Script import COMMAND_LINE_TARGETS + +Import("env") +Import("projenv") + +# Custom targets +# These wrappers just run the normal build task under a different target name +# We intercept the build later on, based on the target name +env.AddTarget( + name="build_weact_154", + dependencies=["buildprog"], + actions=None, + title='Build (WeAct 1.54")', +) +env.AddTarget( + name="build_weact_213", + dependencies=["buildprog"], + actions=None, + title='Build (WeAct 2.13")', +) +env.AddTarget( + name="build_weact_290", + dependencies=["buildprog"], + actions=None, + title='Build (WeAct 2.9")', +) +env.AddTarget( + name="build_weact_420", + dependencies=["buildprog"], + actions=None, + title='Build (WeAct 4.2")', +) + +# Check whether a build was started via one of our custom targets above + +if "build_weact_154" in COMMAND_LINE_TARGETS: + print('Building for WeAct 1.54" Display') + projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DRIVER", "ZJY200200_0154DAAMFGN")) + projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DISPLAYRESILIENCE", "15")) + +elif "build_weact_213" in COMMAND_LINE_TARGETS: + print('Building for WeAct 2.13" Display') + projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DRIVER", "HINK_E0213A289")) + projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DISPLAYRESILIENCE", "10")) + +elif "build_weact_290" in COMMAND_LINE_TARGETS: + print('Building for WeAct 2.9" Display') + projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DRIVER", "ZJY128296_029EAAMFGN")) + projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DISPLAYRESILIENCE", "15")) + +elif "build_weact_420" in COMMAND_LINE_TARGETS: + print('Building for WeAct 4.2" Display') + projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DRIVER", "HINK_E042A87")) + projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DISPLAYRESILIENCE", "15")) diff --git a/variants/heltec_mesh_node_t114-inkhud/nicheGraphics.h b/variants/heltec_mesh_node_t114-inkhud/nicheGraphics.h new file mode 100644 index 000000000..339ec3353 --- /dev/null +++ b/variants/heltec_mesh_node_t114-inkhud/nicheGraphics.h @@ -0,0 +1,94 @@ +#pragma once + +#include "configuration.h" + +#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS + +// InkHUD-specific components +// --------------------------- +#include "graphics/niche/InkHUD/InkHUD.h" + +// Applets +#include "graphics/niche/InkHUD/Applets/User/AllMessage/AllMessageApplet.h" +#include "graphics/niche/InkHUD/Applets/User/DM/DMApplet.h" +#include "graphics/niche/InkHUD/Applets/User/Heard/HeardApplet.h" +#include "graphics/niche/InkHUD/Applets/User/Positions/PositionsApplet.h" +#include "graphics/niche/InkHUD/Applets/User/RecentsList/RecentsListApplet.h" +#include "graphics/niche/InkHUD/Applets/User/ThreadedMessage/ThreadedMessageApplet.h" + +// Shared NicheGraphics components +// -------------------------------- +#include "graphics/niche/Drivers/EInk/HINK_E0213A289.h" // WeAct 2.13" +#include "graphics/niche/Drivers/EInk/HINK_E042A87.h" // WeAct 4.2" +#include "graphics/niche/Drivers/EInk/ZJY128296_029EAAMFGN.h" // WeAct 2.9" +#include "graphics/niche/Drivers/EInk/ZJY200200_0154DAAMFGN.h" // WeACt 1.54" + +#include "graphics/niche/Inputs/TwoButton.h" + +#if !defined(INKHUD_BUILDCONF_DRIVER) || !defined(INKHUD_BUILDCONF_DISPLAYRESILIENCE) +#error If not using a DIY preset, display model and resilience must be set manually +#endif + +void setupNicheGraphics() +{ + using namespace NicheGraphics; + + // SPI + // ----------------------------- + SPI1.begin(); + + // Driver + // ----------------------------- + + // Use E-Ink driver + Drivers::EInk *driver = new Drivers::INKHUD_BUILDCONF_DRIVER; + driver->begin(&SPI1, PIN_EINK_DC, PIN_EINK_CS, PIN_EINK_BUSY, PIN_EINK_RES); + + // InkHUD + // ---------------------------- + + InkHUD::InkHUD *inkhud = InkHUD::InkHUD::getInstance(); + + // Set the driver + inkhud->setDriver(driver); + + // Set how many FAST updates per FULL update. + inkhud->setDisplayResilience(INKHUD_BUILDCONF_DISPLAYRESILIENCE); // Suggest roughly ten + + // Prepare fonts + InkHUD::Applet::fontLarge = FREESANS_9PT_WIN1252; + InkHUD::Applet::fontSmall = FREESANS_6PT_WIN1252; + + // Init settings, and customize defaults + // Values ignored individually if found saved to flash + inkhud->persistence->settings.rotation = (driver->height > driver->width ? 1 : 0); // Rotate 90deg to landscape, if needed + inkhud->persistence->settings.userTiles.maxCount = 4; + inkhud->persistence->settings.optionalFeatures.batteryIcon = true; + + // Pick applets + // Note: order of applets determines priority of "auto-show" feature + inkhud->addApplet("All Messages", new InkHUD::AllMessageApplet); + inkhud->addApplet("DMs", new InkHUD::DMApplet, true, false, 3); // Default on tile 3 + inkhud->addApplet("Channel 0", new InkHUD::ThreadedMessageApplet(0), true, false, 2); // Default on tile 2 + inkhud->addApplet("Channel 1", new InkHUD::ThreadedMessageApplet(1)); + inkhud->addApplet("Positions", new InkHUD::PositionsApplet, true, false, 1); // Default on tile 1 + inkhud->addApplet("Recents List", new InkHUD::RecentsListApplet, true, false, 0); // Default on tile 0 + inkhud->addApplet("Heard", new InkHUD::HeardApplet, true); // Background + + // Start running InkHUD + inkhud->begin(); + + // Buttons + // -------------------------- + + Inputs::TwoButton *buttons = Inputs::TwoButton::getInstance(); // Shared NicheGraphics component + + // #0: Main User Button + buttons->setWiring(0, Inputs::TwoButton::getUserButtonPin()); + buttons->setHandlerShortPress(0, [inkhud]() { inkhud->shortpress(); }); + buttons->setHandlerLongPress(0, [inkhud]() { inkhud->longpress(); }); + + buttons->start(); +} + +#endif \ No newline at end of file diff --git a/variants/heltec_mesh_node_t114-inkhud/platformio.ini b/variants/heltec_mesh_node_t114-inkhud/platformio.ini new file mode 100644 index 000000000..9a5673040 --- /dev/null +++ b/variants/heltec_mesh_node_t114-inkhud/platformio.ini @@ -0,0 +1,19 @@ +[env:heltec-mesh-node-t114-inkhud] +board_level = extra +extends = nrf52840_base, inkhud +board = heltec_mesh_node_t114 +board_check = true +build_flags = + ${nrf52840_base.build_flags} + ${inkhud.build_flags} + -I variants/heltec_mesh_node_t114-inkhud +build_src_filter = + ${nrf52_base.build_src_filter} + ${inkhud.build_src_filter} +lib_deps = + ${inkhud.lib_deps} ; InkHUD libs first, so we get GFXRoot instead of AdafruitGFX + ${nrf52840_base.lib_deps} + lewisxhe/PCF8563_Library@^1.0.1 +extra_scripts = + ${env.extra_scripts} + variants/diy/nrf52_promicro_diy_tcxo/custom_build_tasks.py ; Add to PIO's Project Tasks pane: preset builds for common displays \ No newline at end of file diff --git a/variants/heltec_mesh_node_t114-inkhud/variant.cpp b/variants/heltec_mesh_node_t114-inkhud/variant.cpp new file mode 100644 index 000000000..85c9f4a72 --- /dev/null +++ b/variants/heltec_mesh_node_t114-inkhud/variant.cpp @@ -0,0 +1,38 @@ +/* + Copyright (c) 2014-2015 Arduino LLC. All right reserved. + Copyright (c) 2016 Sandeep Mistry All right reserved. + Copyright (c) 2018, Adafruit Industries (adafruit.com) + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#include "variant.h" +#include "nrf.h" +#include "wiring_constants.h" +#include "wiring_digital.h" + +const uint32_t g_ADigitalPinMap[] = { + // P0 - pins 0 and 1 are hardwired for xtal and should never be enabled + 0xff, 0xff, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, + + // P1 + 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47}; + +void initVariant() +{ + // LED1 + pinMode(PIN_LED1, OUTPUT); + ledOff(PIN_LED1); +} diff --git a/variants/heltec_mesh_node_t114-inkhud/variant.h b/variants/heltec_mesh_node_t114-inkhud/variant.h new file mode 100644 index 000000000..39cbc8f01 --- /dev/null +++ b/variants/heltec_mesh_node_t114-inkhud/variant.h @@ -0,0 +1,175 @@ +// Unlike many other InkHUD variants, this environment does require its own variant.h file +// This is because the default T114 variant maps SPI1 pins to the optional TFT display, and those pins are not broken out + +#ifndef _VARIANT_HELTEC_NRF_ +#define _VARIANT_HELTEC_NRF_ +/** Master clock frequency */ +#define VARIANT_MCK (64000000ul) + +#define USE_LFXO // Board uses 32khz crystal for LF + +/*---------------------------------------------------------------------------- + * Headers + *----------------------------------------------------------------------------*/ + +#include "WVariant.h" + +#ifdef __cplusplus +extern "C" { +#endif // __cplusplus + +#define HELTEC_MESH_NODE_T114 + +// Number of pins defined in PinDescription array +#define PINS_COUNT (48) +#define NUM_DIGITAL_PINS (48) +#define NUM_ANALOG_INPUTS (1) +#define NUM_ANALOG_OUTPUTS (0) + +// LEDs +#define PIN_LED1 (32 + 3) // green (confirmed on 1.0 board) +#define LED_BLUE PIN_LED1 // fake for bluefruit library +#define LED_GREEN PIN_LED1 +#define LED_BUILTIN LED_GREEN +#define LED_STATE_ON 0 // State when LED is lit + +#define HAS_NEOPIXEL // Enable the use of neopixels +#define NEOPIXEL_COUNT 2 // How many neopixels are connected +#define NEOPIXEL_DATA 14 // gpio pin used to send data to the neopixels +#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use + +/* + * Buttons + */ +#define PIN_BUTTON1 (32 + 10) +// #define PIN_BUTTON2 (0 + 18) // 0.18 is labeled on the board as RESET but we configure it in the bootloader as a regular +// GPIO + +/* +No longer populated on PCB +*/ +#define PIN_SERIAL2_RX (0 + 9) +#define PIN_SERIAL2_TX (0 + 10) +// #define PIN_SERIAL2_EN (0 + 17) + +/* + * I2C + */ + +#define WIRE_INTERFACES_COUNT 2 + +// I2C bus 0 +// Routed to footprint for PCF8563TS RTC +// Not populated on T114 V1, maybe in future? +#define PIN_WIRE_SDA (0 + 26) // P0.26 +#define PIN_WIRE_SCL (0 + 27) // P0.27 + +// I2C bus 1 +// Available on header pins, for general use +#define PIN_WIRE1_SDA (0 + 16) // P0.16 +#define PIN_WIRE1_SCL (0 + 13) // P0.13 + +/* + * Lora radio + */ + +#define USE_SX1262 +// #define USE_SX1268 +#define SX126X_CS (0 + 24) // FIXME - we really should define LORA_CS instead +#define LORA_CS (0 + 24) +#define SX126X_DIO1 (0 + 20) +// Note DIO2 is attached internally to the module to an analog switch for TX/RX switching +// #define SX1262_DIO3 (0 + 21) +// This is used as an *output* from the sx1262 and connected internally to power the tcxo, do not drive from the +// main +// CPU? +#define SX126X_BUSY (0 + 17) +#define SX126X_RESET (0 + 25) +// Not really an E22 but TTGO seems to be trying to clone that +#define SX126X_DIO2_AS_RF_SWITCH +#define SX126X_DIO3_TCXO_VOLTAGE 1.8 + +/* + * E-Ink DIY + */ +#define PIN_EINK_MOSI (0 + 8) // also called SDA +#define PIN_EINK_SCLK (0 + 7) +#define PIN_EINK_CS (32 + 12) +#define PIN_EINK_DC (32 + 14) +#define PIN_EINK_RES (0 + 5) +#define PIN_EINK_BUSY (32 + 15) + +/* + * GPS pins + */ + +#define GPS_L76K + +// #define PIN_GPS_RESET (32 + 6) // An output to reset L76K GPS. As per datasheet, low for > 100ms will reset the L76K +#define GPS_RESET_MODE LOW +// #define PIN_GPS_EN (21) +#define VEXT_ENABLE (0 + 21) +#define PERIPHERAL_WARMUP_MS 1000 // Make sure I2C QuickLink has stable power before continuing +#define VEXT_ON_VALUE HIGH +// #define GPS_EN_ACTIVE HIGH +#define PIN_GPS_STANDBY (32 + 2) // An output to wake GPS, low means allow sleep, high means force wake +#define PIN_GPS_PPS (32 + 4) +// Seems to be missing on this new board +// #define PIN_GPS_PPS (32 + 4) // Pulse per second input from the GPS +#define GPS_TX_PIN (32 + 5) // This is for bits going TOWARDS the CPU +#define GPS_RX_PIN (32 + 7) // This is for bits going TOWARDS the GPS + +#define GPS_THREAD_INTERVAL 50 + +#define PIN_SERIAL1_RX GPS_TX_PIN +#define PIN_SERIAL1_TX GPS_RX_PIN + +// PCF8563 RTC Module +#define PCF8563_RTC 0x51 + +/* + * SPI Interfaces + */ +#define SPI_INTERFACES_COUNT 2 + +// For LORA, spi 0 +#define PIN_SPI_MISO (0 + 23) +#define PIN_SPI_MOSI (0 + 22) +#define PIN_SPI_SCK (0 + 19) + +#define PIN_SPI1_MISO -1 +#define PIN_SPI1_MOSI PIN_EINK_MOSI +#define PIN_SPI1_SCK PIN_EINK_SCLK + +// #define PIN_PWR_EN (0 + 6) + +// To debug via the segger JLINK console rather than the CDC-ACM serial device +// #define USE_SEGGER + +// Battery +// The battery sense is hooked to pin A0 (4) +// it is defined in the anlaolgue pin section of this file +// and has 12 bit resolution + +#define ADC_CTRL 6 +#define ADC_CTRL_ENABLED HIGH +#define BATTERY_PIN 4 +#define ADC_RESOLUTION 14 + +#define BATTERY_SENSE_RESOLUTION_BITS 12 +#define BATTERY_SENSE_RESOLUTION 4096.0 +#undef AREF_VOLTAGE +#define AREF_VOLTAGE 3.0 +#define VBAT_AR_INTERNAL AR_INTERNAL_3_0 +#define ADC_MULTIPLIER (4.90F) + +#define HAS_RTC 0 +#ifdef __cplusplus +} +#endif + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#endif From e623c70bd0c2ab9db9baf04888e19d1428310bb9 Mon Sep 17 00:00:00 2001 From: Jonathan Bennett Date: Sat, 14 Jun 2025 19:35:57 -0500 Subject: [PATCH 07/23] More clear key warning messages. --- src/mesh/NodeDB.cpp | 2 +- src/mesh/NodeDB.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/src/mesh/NodeDB.cpp b/src/mesh/NodeDB.cpp index f923c210d..c978709d5 100644 --- a/src/mesh/NodeDB.cpp +++ b/src/mesh/NodeDB.cpp @@ -1573,7 +1573,7 @@ bool NodeDB::updateUser(uint32_t nodeId, meshtastic_User &p, uint8_t channelInde // Alert the user if a remote node is advertising public key that matches our own if (owner.public_key.size == 32 && memcmp(p.public_key.bytes, owner.public_key.bytes, 32) == 0 && !duplicateWarned) { duplicateWarned = true; - char warning[] = "Remote device %s has advertised your public key. This may indicate a low-entropy key. You may need " + char warning[] = "Remote device %s has advertised your public key. This may indicate a compromised key. You may need " "to regenerate your public keys."; LOG_WARN(warning, p.long_name); meshtastic_ClientNotification *cn = clientNotificationPool.allocZeroed(); diff --git a/src/mesh/NodeDB.h b/src/mesh/NodeDB.h index 9e77844f0..90ca5aefd 100644 --- a/src/mesh/NodeDB.h +++ b/src/mesh/NodeDB.h @@ -79,7 +79,7 @@ static const uint8_t LOW_ENTROPY_HASH19[] = {0x6E, 0x42, 0x7A, 0x4A, 0x8C, 0x61, static const uint8_t LOW_ENTROPY_HASH20[] = {0x20, 0x27, 0x2F, 0xBA, 0x0C, 0x99, 0xD7, 0x29, 0xF3, 0x11, 0x35, 0x89, 0x9D, 0x0E, 0x24, 0xA1, 0xC3, 0xCB, 0xDF, 0x8A, 0xF1, 0xC6, 0xFE, 0xD0, 0xD7, 0x9F, 0x92, 0xD6, 0x8F, 0x59, 0xBF, 0xE4}; -static const char LOW_ENTROPY_WARNING[] = "Your Device is configured with a low entropy key. Suggest regenerating DM keys"; +static const char LOW_ENTROPY_WARNING[] = "Compromised keys detected, please regenerate."; #endif /* DeviceState versions used to be defined in the .proto file but really only this function cares. So changed to a From 28244148a20ddf59bbdef6f57c1c70cf8f4f6852 Mon Sep 17 00:00:00 2001 From: "renovate[bot]" <29139614+renovate[bot]@users.noreply.github.com> Date: Sun, 15 Jun 2025 06:14:53 -0500 Subject: [PATCH 08/23] chore(deps): update meshtastic/device-ui digest to 301f11e (#7042) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> --- platformio.ini | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/platformio.ini b/platformio.ini index 555879fb5..c2d65ec02 100644 --- a/platformio.ini +++ b/platformio.ini @@ -108,7 +108,7 @@ lib_deps = [device-ui_base] lib_deps = # renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master - https://github.com/meshtastic/device-ui/archive/1b520fcb168c7447a8d6a6ebc56954c9f472e964.zip + https://github.com/meshtastic/device-ui/archive/301f11e584cbeccf08af923bb2a0e02b669bda0b.zip ; Common libs for environmental measurements in telemetry module [environmental_base] From 7dfbcc8f1db8fbe93995b7cf09372e2bcec7d15b Mon Sep 17 00:00:00 2001 From: "github-actions[bot]" <41898282+github-actions[bot]@users.noreply.github.com> Date: Sun, 15 Jun 2025 06:16:59 -0500 Subject: [PATCH 09/23] Upgrade trunk (#7030) Co-authored-by: sachaw <11172820+sachaw@users.noreply.github.com> --- .trunk/trunk.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/.trunk/trunk.yaml b/.trunk/trunk.yaml index 5f931270c..8bf5c6748 100644 --- a/.trunk/trunk.yaml +++ b/.trunk/trunk.yaml @@ -9,7 +9,7 @@ plugins: lint: enabled: - checkov@3.2.440 - - renovate@40.49.10 + - renovate@40.51.0 - prettier@3.5.3 - trufflehog@3.89.1 - yamllint@1.37.1 From 66d5dde9569ce961de0afb33d6a921f429f6a820 Mon Sep 17 00:00:00 2001 From: "github-actions[bot]" <41898282+github-actions[bot]@users.noreply.github.com> Date: Sun, 15 Jun 2025 06:45:00 -0500 Subject: [PATCH 10/23] [create-pull-request] automated change (#7043) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> --- protobufs | 2 +- src/mesh/generated/meshtastic/admin.pb.h | 12 ++++++++---- 2 files changed, 9 insertions(+), 5 deletions(-) diff --git a/protobufs b/protobufs index 0c112881d..c758376d0 160000 --- a/protobufs +++ b/protobufs @@ -1 +1 @@ -Subproject commit 0c112881dfb4aa24a61ee55dd4c46abbfc093717 +Subproject commit c758376d04cf5d3d42de24f9388836a18bae9a76 diff --git a/src/mesh/generated/meshtastic/admin.pb.h b/src/mesh/generated/meshtastic/admin.pb.h index c111d3993..071640b0d 100644 --- a/src/mesh/generated/meshtastic/admin.pb.h +++ b/src/mesh/generated/meshtastic/admin.pb.h @@ -130,6 +130,8 @@ typedef struct _meshtastic_SharedContact { /* The User of the contact */ bool has_user; meshtastic_User user; + /* Add this contact to the blocked / ignored list */ + bool should_ignore; } meshtastic_SharedContact; /* This message is used by a client to initiate or complete a key verification */ @@ -317,13 +319,13 @@ extern "C" { #define meshtastic_AdminMessage_InputEvent_init_default {0, 0, 0, 0} #define meshtastic_HamParameters_init_default {"", 0, 0, ""} #define meshtastic_NodeRemoteHardwarePinsResponse_init_default {0, {meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default}} -#define meshtastic_SharedContact_init_default {0, false, meshtastic_User_init_default} +#define meshtastic_SharedContact_init_default {0, false, meshtastic_User_init_default, 0} #define meshtastic_KeyVerificationAdmin_init_default {_meshtastic_KeyVerificationAdmin_MessageType_MIN, 0, 0, false, 0} #define meshtastic_AdminMessage_init_zero {0, {0}, {0, {0}}} #define meshtastic_AdminMessage_InputEvent_init_zero {0, 0, 0, 0} #define meshtastic_HamParameters_init_zero {"", 0, 0, ""} #define meshtastic_NodeRemoteHardwarePinsResponse_init_zero {0, {meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero}} -#define meshtastic_SharedContact_init_zero {0, false, meshtastic_User_init_zero} +#define meshtastic_SharedContact_init_zero {0, false, meshtastic_User_init_zero, 0} #define meshtastic_KeyVerificationAdmin_init_zero {_meshtastic_KeyVerificationAdmin_MessageType_MIN, 0, 0, false, 0} /* Field tags (for use in manual encoding/decoding) */ @@ -338,6 +340,7 @@ extern "C" { #define meshtastic_NodeRemoteHardwarePinsResponse_node_remote_hardware_pins_tag 1 #define meshtastic_SharedContact_node_num_tag 1 #define meshtastic_SharedContact_user_tag 2 +#define meshtastic_SharedContact_should_ignore_tag 3 #define meshtastic_KeyVerificationAdmin_message_type_tag 1 #define meshtastic_KeyVerificationAdmin_remote_nodenum_tag 2 #define meshtastic_KeyVerificationAdmin_nonce_tag 3 @@ -500,7 +503,8 @@ X(a, STATIC, REPEATED, MESSAGE, node_remote_hardware_pins, 1) #define meshtastic_SharedContact_FIELDLIST(X, a) \ X(a, STATIC, SINGULAR, UINT32, node_num, 1) \ -X(a, STATIC, OPTIONAL, MESSAGE, user, 2) +X(a, STATIC, OPTIONAL, MESSAGE, user, 2) \ +X(a, STATIC, SINGULAR, BOOL, should_ignore, 3) #define meshtastic_SharedContact_CALLBACK NULL #define meshtastic_SharedContact_DEFAULT NULL #define meshtastic_SharedContact_user_MSGTYPE meshtastic_User @@ -535,7 +539,7 @@ extern const pb_msgdesc_t meshtastic_KeyVerificationAdmin_msg; #define meshtastic_HamParameters_size 31 #define meshtastic_KeyVerificationAdmin_size 25 #define meshtastic_NodeRemoteHardwarePinsResponse_size 496 -#define meshtastic_SharedContact_size 123 +#define meshtastic_SharedContact_size 125 #ifdef __cplusplus } /* extern "C" */ From ac52edd11a36ee9976329387e6fb6e9cd36cca95 Mon Sep 17 00:00:00 2001 From: Ben Meadors Date: Sun, 15 Jun 2025 07:34:03 -0500 Subject: [PATCH 11/23] Add the ability to share ignored contacts (for blacklisting problematic nodes) (#7044) --- src/mesh/NodeDB.cpp | 24 +++++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-) diff --git a/src/mesh/NodeDB.cpp b/src/mesh/NodeDB.cpp index c978709d5..b1ec7b347 100644 --- a/src/mesh/NodeDB.cpp +++ b/src/mesh/NodeDB.cpp @@ -1545,15 +1545,25 @@ void NodeDB::addFromContact(meshtastic_SharedContact contact) return; } info->num = contact.node_num; - info->last_heard = getValidTime(RTCQualityNTP); info->has_user = true; info->user = TypeConversions::ConvertToUserLite(contact.user); - info->is_favorite = true; - // Mark the node's key as manually verified to indicate trustworthiness. - info->bitfield |= NODEINFO_BITFIELD_IS_KEY_MANUALLY_VERIFIED_MASK; - updateGUIforNode = info; - powerFSM.trigger(EVENT_NODEDB_UPDATED); - notifyObservers(true); // Force an update whether or not our node counts have changed + if (contact.should_ignore) { + // If should_ignore is set, + // we need to clear the public key and other cruft, in addition to setting the node as ignored + info->is_ignored = true; + info->has_device_metrics = false; + info->has_position = false; + info->user.public_key.size = 0; + info->user.public_key.bytes[0] = 0; + } else { + info->last_heard = getValidTime(RTCQualityNTP); + info->is_favorite = true; + info->bitfield |= NODEINFO_BITFIELD_IS_KEY_MANUALLY_VERIFIED_MASK; + // Mark the node's key as manually verified to indicate trustworthiness. + updateGUIforNode = info; + powerFSM.trigger(EVENT_NODEDB_UPDATED); + notifyObservers(true); // Force an update whether or not our node counts have changed + } saveNodeDatabaseToDisk(); } From f1dd623ce95bf5d116488c363ddf71b15a6f02d5 Mon Sep 17 00:00:00 2001 From: Andy Shinn Date: Sun, 15 Jun 2025 07:39:49 -0500 Subject: [PATCH 12/23] allow overriding INA3221 channels (#7035) Co-authored-by: Jonathan Bennett --- src/modules/Telemetry/Sensor/INA3221Sensor.h | 12 ++++++++++-- variants/rak4631/variant.h | 4 ++++ 2 files changed, 14 insertions(+), 2 deletions(-) diff --git a/src/modules/Telemetry/Sensor/INA3221Sensor.h b/src/modules/Telemetry/Sensor/INA3221Sensor.h index 69edf8c50..0581f92f6 100644 --- a/src/modules/Telemetry/Sensor/INA3221Sensor.h +++ b/src/modules/Telemetry/Sensor/INA3221Sensor.h @@ -8,16 +8,24 @@ #include "VoltageSensor.h" #include +#ifndef INA3221_ENV_CH +#define INA3221_ENV_CH INA3221_CH1 +#endif + +#ifndef INA3221_BAT_CH +#define INA3221_BAT_CH INA3221_CH1 +#endif + class INA3221Sensor : public TelemetrySensor, VoltageSensor, CurrentSensor { private: INA3221 ina3221 = INA3221(INA3221_ADDR42_SDA); // channel to report voltage/current for environment metrics - ina3221_ch_t ENV_CH = INA3221_CH1; + static const ina3221_ch_t ENV_CH = INA3221_ENV_CH; // channel to report battery voltage for device_battery_ina_address - ina3221_ch_t BAT_CH = INA3221_CH1; + static const ina3221_ch_t BAT_CH = INA3221_BAT_CH; // get a single measurement for a channel struct _INA3221Measurement getMeasurement(ina3221_ch_t ch); diff --git a/variants/rak4631/variant.h b/variants/rak4631/variant.h index 0da1c04ea..82c914892 100644 --- a/variants/rak4631/variant.h +++ b/variants/rak4631/variant.h @@ -219,6 +219,10 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG // Testing USB detection #define NRF_APM +// If using a power chip like the INA3221 you can override the default battery voltage channel below +// and comment out NRF_APM to use the INA3221 instead of the USB detection for charging +// #define INA3221_BAT_CH INA3221_CH2 +// #define INA3221_ENV_CH INA3221_CH1 // enables 3.3V periphery like GPS or IO Module // Do not toggle this for GPS power savings From b0c53275852dc1419f4506849f9da852421671ac Mon Sep 17 00:00:00 2001 From: Ben Meadors Date: Sun, 15 Jun 2025 07:40:45 -0500 Subject: [PATCH 13/23] Trunk --- .github/pull_request_template.md | 5 +++-- boards/seeed_xiao_nrf52840_kit.json | 4 +--- 2 files changed, 4 insertions(+), 5 deletions(-) diff --git a/.github/pull_request_template.md b/.github/pull_request_template.md index a15b34aae..0142c57a2 100644 --- a/.github/pull_request_template.md +++ b/.github/pull_request_template.md @@ -1,6 +1,7 @@ ## 🙏 Thank you for sending in a pull request, here's some tips to get started! ### ❌ (Please delete all these tips and replace them with your text) ❌ + - Before starting on some new big chunk of code, it it is optional but highly recommended to open an issue first to say "Hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc... @@ -15,12 +16,12 @@ - If you do not have the affected hardware to test your code changes adequately against regressions, please indicate this, so that contributors and commnunity members can help test your changes. - If your PR gets accepted you can request a "Contributor" role in the Meshtastic Discord - ## 🤝 Attestations + - [ ] I have tested that my proposed changes behave as described. - [ ] I have tested that my proposed changes do not cause any obvious regressions on the following devices: - [ ] Heltec (Lora32) V3 - - [ ] LilyGo T-Deck + - [ ] LilyGo T-Deck - [ ] LilyGo T-Beam - [ ] RAK WisBlock 4631 - [ ] Seeed Studio T-1000E tracker card diff --git a/boards/seeed_xiao_nrf52840_kit.json b/boards/seeed_xiao_nrf52840_kit.json index 4c5fdbeda..676733874 100644 --- a/boards/seeed_xiao_nrf52840_kit.json +++ b/boards/seeed_xiao_nrf52840_kit.json @@ -7,9 +7,7 @@ "cpu": "cortex-m4", "extra_flags": "-DARDUINO_MDBT50Q_RX -DNRF52840_XXAA", "f_cpu": "64000000L", - "hwids": [ - ["0x2886", "0x0166"] - ], + "hwids": [["0x2886", "0x0166"]], "usb_product": "XIAO-BOOT", "mcu": "nrf52840", "variant": "seeed_xiao_nrf52840_kit", From 8f9e569825b673a21c644d3b398a8afea1ac222e Mon Sep 17 00:00:00 2001 From: Ben Meadors Date: Sun, 15 Jun 2025 07:52:38 -0500 Subject: [PATCH 14/23] Create FUNDING.yml --- .github/FUNDING.yml | 3 +++ 1 file changed, 3 insertions(+) create mode 100644 .github/FUNDING.yml diff --git a/.github/FUNDING.yml b/.github/FUNDING.yml new file mode 100644 index 000000000..8529eb7fc --- /dev/null +++ b/.github/FUNDING.yml @@ -0,0 +1,3 @@ +# These are supported funding model platforms + +open_collective: meshtastic From 8a8a7cdefc429dbf168e04f10fe31cb416ff7ab4 Mon Sep 17 00:00:00 2001 From: Jonathan Bennett Date: Sun, 15 Jun 2025 16:36:53 -0500 Subject: [PATCH 15/23] cppcheck-supress to ignore intentional error --- bin/check-all.sh | 2 +- variants/heltec_mesh_node_t114-inkhud/nicheGraphics.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/bin/check-all.sh b/bin/check-all.sh index d1b50a8aa..29d6b5532 100755 --- a/bin/check-all.sh +++ b/bin/check-all.sh @@ -23,4 +23,4 @@ for BOARD in $BOARDS; do CHECK="${CHECK} -e ${BOARD}" done -pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt" $CHECK --skip-packages --pattern="src/" --fail-on-defect=medium --fail-on-defect=high +pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt --inline-suppr" $CHECK --skip-packages --pattern="src/" --fail-on-defect=medium --fail-on-defect=high diff --git a/variants/heltec_mesh_node_t114-inkhud/nicheGraphics.h b/variants/heltec_mesh_node_t114-inkhud/nicheGraphics.h index 339ec3353..fe1c281bf 100644 --- a/variants/heltec_mesh_node_t114-inkhud/nicheGraphics.h +++ b/variants/heltec_mesh_node_t114-inkhud/nicheGraphics.h @@ -26,6 +26,7 @@ #include "graphics/niche/Inputs/TwoButton.h" #if !defined(INKHUD_BUILDCONF_DRIVER) || !defined(INKHUD_BUILDCONF_DISPLAYRESILIENCE) +// cppcheck-suppress preprocessorErrorDirective #error If not using a DIY preset, display model and resilience must be set manually #endif From fcefd592e28c3c3e34547f1dc09e413f2b299fc7 Mon Sep 17 00:00:00 2001 From: Ben Meadors Date: Sun, 15 Jun 2025 19:27:17 -0500 Subject: [PATCH 16/23] Update version.properties --- version.properties | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/version.properties b/version.properties index e13094769..c079fbe59 100644 --- a/version.properties +++ b/version.properties @@ -1,4 +1,4 @@ [VERSION] major = 2 minor = 6 -build = 11 +build = 12 From 9861e82f0a1681a7b1c9764ddeba61250a4f4f41 Mon Sep 17 00:00:00 2001 From: Austin Date: Sun, 15 Jun 2025 21:16:33 -0400 Subject: [PATCH 17/23] Manual bump metainfo version (#7049) --- bin/org.meshtastic.meshtasticd.metainfo.xml | 3 +++ 1 file changed, 3 insertions(+) diff --git a/bin/org.meshtastic.meshtasticd.metainfo.xml b/bin/org.meshtastic.meshtasticd.metainfo.xml index 40f86fb0b..92c0384f4 100644 --- a/bin/org.meshtastic.meshtasticd.metainfo.xml +++ b/bin/org.meshtastic.meshtasticd.metainfo.xml @@ -87,6 +87,9 @@ + + https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.12 + https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.11 From bd0e25f3f5e79c76c114117587ce352eee128c25 Mon Sep 17 00:00:00 2001 From: Taha Date: Mon, 16 Jun 2025 05:32:28 +0200 Subject: [PATCH 18/23] Fix Critical Error #3 for LilyGo T-Echo (#6791) * Fix Critical Error #3 * clang format --- variants/t-echo/variant.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/variants/t-echo/variant.h b/variants/t-echo/variant.h index 38b7f4743..3f96ffc83 100644 --- a/variants/t-echo/variant.h +++ b/variants/t-echo/variant.h @@ -139,6 +139,7 @@ External serial flash WP25R1635FZUIL0 // Not really an E22 but TTGO seems to be trying to clone that #define SX126X_DIO2_AS_RF_SWITCH #define SX126X_DIO3_TCXO_VOLTAGE 1.8 +#define TCXO_OPTIONAL // Internally the TTGO module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for the sx1262interface // code) @@ -214,7 +215,7 @@ External serial flash WP25R1635FZUIL0 #define VBAT_AR_INTERNAL AR_INTERNAL_3_0 #define ADC_MULTIPLIER (2.0F) -#define NO_EXT_GPIO 1 +// #define NO_EXT_GPIO 1 #define HAS_RTC 1 From 465fe18a895f9f4e6d9b0cf5654257acee077419 Mon Sep 17 00:00:00 2001 From: todd-herbert Date: Mon, 16 Jun 2025 23:09:55 +1200 Subject: [PATCH 19/23] Dismiss ExternalNotification nagging on InkHUD button press (#7056) * Expose ExternalNotification::isNagging * Dismiss external notification on button press --- src/graphics/niche/InkHUD/Events.cpp | 27 +++++++++++++++++++++- src/graphics/niche/InkHUD/Events.h | 3 +++ src/modules/ExternalNotificationModule.cpp | 6 +++++ src/modules/ExternalNotificationModule.h | 2 ++ 4 files changed, 37 insertions(+), 1 deletion(-) diff --git a/src/graphics/niche/InkHUD/Events.cpp b/src/graphics/niche/InkHUD/Events.cpp index ee6c04938..109f75df5 100644 --- a/src/graphics/niche/InkHUD/Events.cpp +++ b/src/graphics/niche/InkHUD/Events.cpp @@ -4,6 +4,7 @@ #include "RTC.h" #include "modules/AdminModule.h" +#include "modules/ExternalNotificationModule.h" #include "modules/TextMessageModule.h" #include "sleep.h" @@ -37,6 +38,10 @@ void InkHUD::Events::begin() void InkHUD::Events::onButtonShort() { + // Cancel any beeping, buzzing, blinking + // Some button handling suppressed if we are dismissing an external notification (see below) + bool dismissedExt = dismissExternalNotification(); + // Check which system applet wants to handle the button press (if any) SystemApplet *consumer = nullptr; for (SystemApplet *sa : inkhud->systemApplets) { @@ -49,7 +54,7 @@ void InkHUD::Events::onButtonShort() // If no system applet is handling input, default behavior instead is to cycle applets if (consumer) consumer->onButtonShortPress(); - else + else if (!dismissedExt) // Don't change applet if this button press silenced the external notification module inkhud->nextApplet(); } @@ -204,4 +209,24 @@ int InkHUD::Events::beforeLightSleep(void *unused) } #endif +// Silence all ongoing beeping, blinking, buzzing, coming from the external notification module +// Returns true if an external notification was active, and we dismissed it +// Button handling changes depending on our result +bool InkHUD::Events::dismissExternalNotification() +{ + // Abort if not using external notifications + if (!moduleConfig.external_notification.enabled) + return false; + + // Abort if nothing to dismiss + if (!externalNotificationModule->nagging()) + return false; + + // Stop the beep buzz blink + externalNotificationModule->stopNow(); + + // Inform that we did indeed dismiss an external notification + return true; +} + #endif \ No newline at end of file diff --git a/src/graphics/niche/InkHUD/Events.h b/src/graphics/niche/InkHUD/Events.h index 489135ea3..2a2dad5dc 100644 --- a/src/graphics/niche/InkHUD/Events.h +++ b/src/graphics/niche/InkHUD/Events.h @@ -62,6 +62,9 @@ class Events CallbackObserver lightSleepObserver = CallbackObserver(this, &Events::beforeLightSleep); #endif + // End any externalNotification beeping, buzzing, blinking etc + bool dismissExternalNotification(); + // If set, InkHUD's data will be erased during onReboot bool eraseOnReboot = false; }; diff --git a/src/modules/ExternalNotificationModule.cpp b/src/modules/ExternalNotificationModule.cpp index dc17460f6..615c3590b 100644 --- a/src/modules/ExternalNotificationModule.cpp +++ b/src/modules/ExternalNotificationModule.cpp @@ -293,6 +293,12 @@ bool ExternalNotificationModule::getExternal(uint8_t index) return externalCurrentState[index]; } +// Allow other firmware components to determine whether a notification is ongoing +bool ExternalNotificationModule::nagging() +{ + return isNagging; +} + void ExternalNotificationModule::stopNow() { rtttl::stop(); diff --git a/src/modules/ExternalNotificationModule.h b/src/modules/ExternalNotificationModule.h index 841ca6de9..85950464d 100644 --- a/src/modules/ExternalNotificationModule.h +++ b/src/modules/ExternalNotificationModule.h @@ -40,6 +40,8 @@ class ExternalNotificationModule : public SinglePortModule, private concurrency: void setMute(bool mute) { isMuted = mute; } bool getMute() { return isMuted; } + bool nagging(); + void stopNow(); void handleGetRingtone(const meshtastic_MeshPacket &req, meshtastic_AdminMessage *response); From a81b41cbfb6ade220351fefecb816bae34c88b82 Mon Sep 17 00:00:00 2001 From: "github-actions[bot]" <41898282+github-actions[bot]@users.noreply.github.com> Date: Mon, 16 Jun 2025 06:11:10 -0500 Subject: [PATCH 20/23] automated bumps (#7050) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> --- bin/org.meshtastic.meshtasticd.metainfo.xml | 3 +++ debian/changelog | 7 +++++-- version.properties | 2 +- 3 files changed, 9 insertions(+), 3 deletions(-) diff --git a/bin/org.meshtastic.meshtasticd.metainfo.xml b/bin/org.meshtastic.meshtasticd.metainfo.xml index 92c0384f4..35a39e570 100644 --- a/bin/org.meshtastic.meshtasticd.metainfo.xml +++ b/bin/org.meshtastic.meshtasticd.metainfo.xml @@ -87,6 +87,9 @@ + + https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.13 + https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.12 diff --git a/debian/changelog b/debian/changelog index 4b67eecd4..f7786e939 100644 --- a/debian/changelog +++ b/debian/changelog @@ -1,4 +1,4 @@ -meshtasticd (2.6.11.0) UNRELEASED; urgency=medium +meshtasticd (2.6.13.0) UNRELEASED; urgency=medium [ Austin Lane ] * Initial packaging @@ -19,4 +19,7 @@ meshtasticd (2.6.11.0) UNRELEASED; urgency=medium [ ] * GitHub Actions Automatic version bump - -- Mon, 02 Jun 2025 20:00:55 +0000 + [ ] + * GitHub Actions Automatic version bump + + -- Mon, 16 Jun 2025 02:10:49 +0000 diff --git a/version.properties b/version.properties index c079fbe59..384df78ba 100644 --- a/version.properties +++ b/version.properties @@ -1,4 +1,4 @@ [VERSION] major = 2 minor = 6 -build = 12 +build = 13 From 4f0b95e9104b86b13bf631bb7896590ac418f8d8 Mon Sep 17 00:00:00 2001 From: "github-actions[bot]" <41898282+github-actions[bot]@users.noreply.github.com> Date: Mon, 16 Jun 2025 06:24:26 -0500 Subject: [PATCH 21/23] Upgrade trunk (#7053) Co-authored-by: sachaw <11172820+sachaw@users.noreply.github.com> --- .trunk/trunk.yaml | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/.trunk/trunk.yaml b/.trunk/trunk.yaml index 8bf5c6748..627e1ff0a 100644 --- a/.trunk/trunk.yaml +++ b/.trunk/trunk.yaml @@ -8,8 +8,8 @@ plugins: uri: https://github.com/trunk-io/plugins lint: enabled: - - checkov@3.2.440 - - renovate@40.51.0 + - checkov@3.2.441 + - renovate@40.53.1 - prettier@3.5.3 - trufflehog@3.89.1 - yamllint@1.37.1 From 1a6bb97f168a30c1910bbbb748335e7900670c58 Mon Sep 17 00:00:00 2001 From: Nivek-domo <123359286+Nivek-domo@users.noreply.github.com> Date: Mon, 16 Jun 2025 13:54:55 +0200 Subject: [PATCH 22/23] Fix RCWL9620Sensor for rak11310 support (#6617) * Update RCWL9620Sensor.cpp test on rak11310, work very wel now * Update RCWL9620Sensor.cpp * Trunk --------- Co-authored-by: Ben Meadors --- .../Telemetry/Sensor/RCWL9620Sensor.cpp | 43 +++++++++++++------ 1 file changed, 29 insertions(+), 14 deletions(-) diff --git a/src/modules/Telemetry/Sensor/RCWL9620Sensor.cpp b/src/modules/Telemetry/Sensor/RCWL9620Sensor.cpp index e352dda8d..9f7a55cc5 100644 --- a/src/modules/Telemetry/Sensor/RCWL9620Sensor.cpp +++ b/src/modules/Telemetry/Sensor/RCWL9620Sensor.cpp @@ -41,21 +41,36 @@ void RCWL9620Sensor::begin(TwoWire *wire, uint8_t addr, uint8_t sda, uint8_t scl float RCWL9620Sensor::getDistance() { - uint32_t data; - _wire->beginTransmission(_addr); // Transfer data to addr. - _wire->write(0x01); - _wire->endTransmission(); // Stop data transmission with the Ultrasonic - // Unit. + uint32_t data = 0; + uint8_t b1 = 0, b2 = 0, b3 = 0; - _wire->requestFrom(_addr, - (uint8_t)3); // Request 3 bytes from Ultrasonic Unit. + LOG_DEBUG("[RCWL9620] Start measure command"); + + _wire->beginTransmission(_addr); + _wire->write(0x01); // À tester aussi sans cette ligne si besoin + uint8_t result = _wire->endTransmission(); + LOG_DEBUG("[RCWL9620] endTransmission result = %d", result); + delay(100); // délai pour laisser le capteur répondre + + LOG_DEBUG("[RCWL9620] Read i2c data:"); + _wire->requestFrom(_addr, (uint8_t)3); + + if (_wire->available() < 3) { + LOG_DEBUG("[RCWL9620] less than 3 octets !"); + return 0.0; + } + + b1 = _wire->read(); + b2 = _wire->read(); + b3 = _wire->read(); + + data = ((uint32_t)b1 << 16) | ((uint32_t)b2 << 8) | b3; + + float Distance = float(data) / 1000.0; + + LOG_DEBUG("[RCWL9620] Bytes readed = %02X %02X %02X", b1, b2, b3); + LOG_DEBUG("[RCWL9620] data=%.2f, level=%.2f", (double)data, (double)Distance); - data = _wire->read(); - data <<= 8; - data |= _wire->read(); - data <<= 8; - data |= _wire->read(); - float Distance = float(data) / 1000; if (Distance > 4500.00) { return 4500.00; } else { @@ -63,4 +78,4 @@ float RCWL9620Sensor::getDistance() } } -#endif \ No newline at end of file +#endif From 6374ffea35fbd598337631ad471aee830f8032ae Mon Sep 17 00:00:00 2001 From: Austin Date: Mon, 16 Jun 2025 08:52:20 -0400 Subject: [PATCH 23/23] Run daily packaging earlier (PPA) (#7057) --- .github/workflows/daily_packaging.yml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/.github/workflows/daily_packaging.yml b/.github/workflows/daily_packaging.yml index 11fe2043a..18939d567 100644 --- a/.github/workflows/daily_packaging.yml +++ b/.github/workflows/daily_packaging.yml @@ -1,7 +1,7 @@ name: Daily Packaging on: schedule: - - cron: 0 9 * * * + - cron: 0 2 * * * workflow_dispatch: push: branches: