rbxii3/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2025-12-20 09:43:03 +00:00
Code Issues Packages Projects Releases Wiki Activity

Crowpanel 4.3, 5.0, 7.0 support (#6611)

Browse Source 
* SD software SPI control
* fix notification crash;
* allow wake on touch
* don't build non-MUI variants
* use pwm buzzer
* Finalize support for Crowpanel TFT 2.4, 2.8 and 3.5
* add hardware ID for TFT panels
* Add stubs for the bigger panels. WIP!
* fix braces
* elecrow 4.3, 5.0, 7.0 support
* completed implementation 4.3, 5.0, 7.0 variants
* NodeDB default config & simplified light sleep macros
* trunk fmt
* remove flags
* removed leftovers (note: rtc gpios are only needed for deep sleep; the remove section caused issues with the elecrows)
---------
Co-authored-by: mverch67 <manuel.verch@gmx.de>
Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>
Co-authored-by: Austin <vidplace7@gmail.com>
This commit is contained in:
Thomas Göttgens
2025-05-13 14:15:52 +02:00
committed by GitHub
parent e1417cff2e
commit cc66f7c79b
12 changed files with 98 additions and 189 deletions
Download Patch File Download Diff File Expand all files Collapse all files

35
src/sleep.cpp
View File

@@ -24,6 +24,7 @@
#include "mesh/wifi/WiFiAPClient.h"
#endif
#include "rom/rtc.h"
#include <RadioLib.h>
#include <driver/rtc_io.h>
#include <driver/uart.h>
@@ -284,6 +285,8 @@ void doDeepSleep(uint32_t msecToWake, bool skipPreflight = false, bool skipSaveN
pinMode(LORA_CS, OUTPUT);
digitalWrite(LORA_CS, HIGH);
gpio_hold_en((gpio_num_t)LORA_CS);
#elif defined(ELECROW_PANEL)
// Elecrow panels do not use LORA_CS, do nothing
#else
if (GPIO_IS_VALID_OUTPUT_GPIO(LORA_CS)) {
// LoRa CS (RADIO_NSS) needs to stay HIGH, even during deep sleep
@@ -400,7 +403,7 @@ esp_sleep_wakeup_cause_t doLightSleep(uint64_t sleepMsec) // FIXME, use a more r
#ifdef INPUTDRIVER_ENCODER_BTN
gpio_wakeup_enable((gpio_num_t)INPUTDRIVER_ENCODER_BTN, GPIO_INTR_LOW_LEVEL);
#endif
#if defined(T_WATCH_S3) || defined(ELECROW)
#if defined(WAKE_ON_TOUCH)
gpio_wakeup_enable((gpio_num_t)SCREEN_TOUCH_INT, GPIO_INTR_LOW_LEVEL);
#endif
enableLoraInterrupt();
@@ -433,11 +436,12 @@ esp_sleep_wakeup_cause_t doLightSleep(uint64_t sleepMsec) // FIXME, use a more r
// Disable wake-on-button interrupt. Re-attach normal button-interrupts
gpio_wakeup_disable(pin);
#endif
#if defined(T_WATCH_S3) || defined(ELECROW)
#if defined(INPUTDRIVER_ENCODER_BTN)
gpio_wakeup_disable((gpio_num_t)INPUTDRIVER_ENCODER_BTN);
#endif
#if defined(WAKE_ON_TOUCH)
gpio_wakeup_disable((gpio_num_t)SCREEN_TOUCH_INT);
#endif
#if !defined(SOC_PM_SUPPORT_EXT_WAKEUP) && defined(LORA_DIO1) && (LORA_DIO1 != RADIOLIB_NC)
if (radioType != RF95_RADIO) {
gpio_wakeup_disable((gpio_num_t)LORA_DIO1);
@@ -506,23 +510,24 @@ bool shouldLoraWake(uint32_t msecToWake)
void enableLoraInterrupt()
{
esp_err_t res;
#if SOC_PM_SUPPORT_EXT_WAKEUP && defined(LORA_DIO1) && (LORA_DIO1 != RADIOLIB_NC)
gpio_pulldown_en((gpio_num_t)LORA_DIO1);
res = gpio_pulldown_en((gpio_num_t)LORA_DIO1);
if (res != ESP_OK) {
LOG_ERROR("gpio_pulldown_en(LORA_DIO1) result %d", res);
}
#if defined(LORA_RESET) && (LORA_RESET != RADIOLIB_NC)
gpio_pullup_en((gpio_num_t)LORA_RESET);
res = gpio_pullup_en((gpio_num_t)LORA_RESET);
if (res != ESP_OK) {
LOG_ERROR("gpio_pullup_en(LORA_RESET) result %d", res);
}
#endif
#if defined(LORA_CS) && (LORA_CS != RADIOLIB_NC)
#if defined(LORA_CS) && (LORA_CS != RADIOLIB_NC) && !defined(ELECROW_PANEL)
gpio_pullup_en((gpio_num_t)LORA_CS);
#endif
if (rtc_gpio_is_valid_gpio((gpio_num_t)LORA_DIO1)) {
// Setup light/deep sleep with wakeup by external source
LOG_INFO("setup LORA_DIO1 (GPIO%02d) with wakeup by external source", LORA_DIO1);
esp_sleep_enable_ext0_wakeup((gpio_num_t)LORA_DIO1, HIGH);
} else {
LOG_INFO("setup LORA_DIO1 (GPIO%02d) with wakeup by gpio interrupt", LORA_DIO1);
gpio_wakeup_enable((gpio_num_t)LORA_DIO1, GPIO_INTR_HIGH_LEVEL);
}
LOG_INFO("setup LORA_DIO1 (GPIO%02d) with wakeup by gpio interrupt", LORA_DIO1);
gpio_wakeup_enable((gpio_num_t)LORA_DIO1, GPIO_INTR_HIGH_LEVEL);
#elif defined(LORA_DIO1) && (LORA_DIO1 != RADIOLIB_NC)
if (radioType != RF95_RADIO) {