mirror of
https://github.com/meshtastic/firmware.git
synced 2026-01-09 03:17:31 +00:00
Merge branch 'master' into master
This commit is contained in:
Thomas Göttgens
GitHub
31
variants/diy/nrf52_promicro_diy_tcxo/variant.cpp
Normal file
31
variants/diy/nrf52_promicro_diy_tcxo/variant.cpp
Normal file
@@ -0,0 +1,31 @@
|
||||
/*
|
||||
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
Copyright (c) 2016 Sandeep Mistry All right reserved.
|
||||
Copyright (c) 2018, Adafruit Industries (adafruit.com)
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#include "variant.h"
|
||||
#include "nrf.h"
|
||||
#include "wiring_constants.h"
|
||||
#include "wiring_digital.h"
|
||||
|
||||
const uint32_t g_ADigitalPinMap[] = {
|
||||
// P0
|
||||
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
|
||||
|
||||
// P1
|
||||
32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
|
||||
154
variants/diy/nrf52_promicro_diy_tcxo/variant.h
Normal file
154
variants/diy/nrf52_promicro_diy_tcxo/variant.h
Normal file
@@ -0,0 +1,154 @@
|
||||
#ifndef _VARIANT_PROMICRO_DIY_
|
||||
#define _VARIANT_PROMICRO_DIY_
|
||||
|
||||
/** Master clock frequency */
|
||||
#define VARIANT_MCK (64000000ul)
|
||||
|
||||
// #define USE_LFXO // Board uses 32khz crystal for LF
|
||||
#define USE_LFRC // Board uses RC for LF
|
||||
|
||||
#define PROMICRO_DIY_TCXO
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Headers
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#include "WVariant.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif // __cplusplus
|
||||
|
||||
/*
|
||||
NRF52 PRO MICRO PIN ASSIGNMENT
|
||||
|
||||
| Pin | Function | | Pin | Function |
|
||||
|-------|------------|---|---------|-------------|
|
||||
| Gnd | | | vbat | |
|
||||
| P0.06 | Serial2 RX | | vbat | |
|
||||
| P0.08 | Serial2 TX | | Gnd | |
|
||||
| Gnd | | | reset | |
|
||||
| Gnd | | | ext_vcc | *see 0.13 |
|
||||
| P0.17 | RXEN | | P0.31 | BATTERY_PIN |
|
||||
| P0.20 | GPS_RX | | P0.29 | BUSY |
|
||||
| P0.22 | GPS_TX | | P0.02 | MISO |
|
||||
| P0.24 | GPS_EN | | P1.15 | MOSI |
|
||||
| P1.00 | BUTTON_PIN | | P1.13 | CS |
|
||||
| P0.11 | SCL | | P1.11 | SCK |
|
||||
| P1.04 | SDA | | P0.10 | DIO1/IRQ |
|
||||
| P1.06 | Free pin | | P0.09 | RESET |
|
||||
| | | | | |
|
||||
| | Mid board | | | Internal |
|
||||
| P1.01 | Free pin | | 0.15 | LED |
|
||||
| P1.02 | Free pin | | 0.13 | 3V3_EN |
|
||||
| P1.07 | Free pin | | | |
|
||||
*/
|
||||
|
||||
// Number of pins defined in PinDescription array
|
||||
#define PINS_COUNT (48)
|
||||
#define NUM_DIGITAL_PINS (48)
|
||||
#define NUM_ANALOG_INPUTS (1)
|
||||
#define NUM_ANALOG_OUTPUTS (0)
|
||||
|
||||
// Pin 13 enables 3.3V periphery. If the Lora module is on this pin, then it should stay enabled at all times.
|
||||
#define PIN_3V3_EN (0 + 13) // P0.13
|
||||
|
||||
// Analog pins
|
||||
#define BATTERY_PIN (0 + 31) // P0.31 Battery ADC
|
||||
#define ADC_CHANNEL ADC1_GPIO4_CHANNEL
|
||||
#define ADC_RESOLUTION 14
|
||||
#define BATTERY_SENSE_RESOLUTION_BITS 12
|
||||
#define BATTERY_SENSE_RESOLUTION 4096.0
|
||||
// Definition of milliVolt per LSB => 3.0V ADC range and 12-bit ADC resolution = 3000mV/4096
|
||||
#define VBAT_MV_PER_LSB (0.73242188F)
|
||||
// Voltage divider value => 1.5M + 1M voltage divider on VBAT = (1.5M / (1M + 1.5M))
|
||||
#define VBAT_DIVIDER (0.6F)
|
||||
// Compensation factor for the VBAT divider
|
||||
#define VBAT_DIVIDER_COMP (1.73)
|
||||
// Fixed calculation of milliVolt from compensation value
|
||||
#define REAL_VBAT_MV_PER_LSB (VBAT_DIVIDER_COMP * VBAT_MV_PER_LSB)
|
||||
#undef AREF_VOLTAGE
|
||||
#define AREF_VOLTAGE 3.0
|
||||
#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
|
||||
#define ADC_MULTIPLIER VBAT_DIVIDER_COMP // REAL_VBAT_MV_PER_LSB
|
||||
#define VBAT_RAW_TO_SCALED(x) (REAL_VBAT_MV_PER_LSB * x)
|
||||
|
||||
// WIRE IC AND IIC PINS
|
||||
#define WIRE_INTERFACES_COUNT 1
|
||||
|
||||
#define PIN_WIRE_SDA (32 + 4) // P1.04
|
||||
#define PIN_WIRE_SCL (0 + 11) // P0.11
|
||||
|
||||
// LED
|
||||
#define PIN_LED1 (0 + 15) // P0.15
|
||||
#define LED_BUILTIN PIN_LED1
|
||||
// Actually red
|
||||
#define LED_BLUE PIN_LED1
|
||||
#define LED_STATE_ON 1 // State when LED is lit
|
||||
|
||||
// Button
|
||||
#define BUTTON_PIN (32 + 0) // P1.00
|
||||
|
||||
// GPS
|
||||
#define PIN_GPS_TX (0 + 22) // P0.22
|
||||
#define PIN_GPS_RX (0 + 20) // P0.20
|
||||
|
||||
#define PIN_GPS_EN (0 + 24) // P0.24
|
||||
#define GPS_POWER_TOGGLE
|
||||
#define GPS_UBLOX
|
||||
// define GPS_DEBUG
|
||||
|
||||
// UART interfaces
|
||||
#define PIN_SERIAL1_RX PIN_GPS_TX
|
||||
#define PIN_SERIAL1_TX PIN_GPS_RX
|
||||
|
||||
#define PIN_SERIAL2_RX (0 + 6) // P0.06
|
||||
#define PIN_SERIAL2_TX (0 + 8) // P0.08
|
||||
|
||||
// Serial interfaces
|
||||
#define SPI_INTERFACES_COUNT 1
|
||||
|
||||
#define PIN_SPI_MISO (0 + 2) // P0.02
|
||||
#define PIN_SPI_MOSI (32 + 15) // P1.15
|
||||
#define PIN_SPI_SCK (32 + 11) // P1.11
|
||||
|
||||
// LORA MODULES
|
||||
#define USE_LLCC68
|
||||
#define USE_SX1262
|
||||
|
||||
// LORA CONFIG
|
||||
#define SX126X_CS (32 + 13) // P1.13 FIXME - we really should define LORA_CS instead
|
||||
#define SX126X_DIO1 (0 + 10) // P0.10 IRQ
|
||||
#define SX126X_DIO2_AS_RF_SWITCH // Note for E22 modules: DIO2 is not attached internally to TXEN for automatic TX/RX switching,
|
||||
// so it needs connecting externally if it is used in this way
|
||||
#define SX126X_BUSY (0 + 29) // P0.29
|
||||
#define SX126X_RESET (0 + 9) // P0.09
|
||||
#define SX126X_RXEN (0 + 17) // P0.17
|
||||
#define SX126X_TXEN RADIOLIB_NC // Assuming that DIO2 is connected to TXEN pin. If not, TXEN must be connected.
|
||||
|
||||
/*
|
||||
On the SX1262, DIO3 sets the voltage for an external TCXO, if one is present. If one is not present, then this should not be used.
|
||||
|
||||
Ebyte
|
||||
e22-900mm22s has no TCXO
|
||||
e22-900m22s has TCXO
|
||||
e220-900mm22s has no TCXO, works with/without this definition, looks like DIO3 not connected at all
|
||||
|
||||
AI-thinker
|
||||
RA-01SH does not have TCXO
|
||||
|
||||
Waveshare
|
||||
Core1262 has TCXO
|
||||
|
||||
*/
|
||||
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Arduino objects - C++ only
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#endif
|
||||
31
variants/diy/nrf52_promicro_diy_xtal/variant.cpp
Normal file
31
variants/diy/nrf52_promicro_diy_xtal/variant.cpp
Normal file
@@ -0,0 +1,31 @@
|
||||
/*
|
||||
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
Copyright (c) 2016 Sandeep Mistry All right reserved.
|
||||
Copyright (c) 2018, Adafruit Industries (adafruit.com)
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#include "variant.h"
|
||||
#include "nrf.h"
|
||||
#include "wiring_constants.h"
|
||||
#include "wiring_digital.h"
|
||||
|
||||
const uint32_t g_ADigitalPinMap[] = {
|
||||
// P0
|
||||
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
|
||||
|
||||
// P1
|
||||
32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
|
||||
153
variants/diy/nrf52_promicro_diy_xtal/variant.h
Normal file
153
variants/diy/nrf52_promicro_diy_xtal/variant.h
Normal file
@@ -0,0 +1,153 @@
|
||||
#ifndef _VARIANT_PROMICRO_DIY_
|
||||
#define _VARIANT_PROMICRO_DIY_
|
||||
|
||||
/** Master clock frequency */
|
||||
#define VARIANT_MCK (64000000ul)
|
||||
|
||||
// #define USE_LFXO // Board uses 32khz crystal for LF
|
||||
#define USE_LFRC // Board uses RC for LF
|
||||
|
||||
#define PROMICRO_DIY_XTAL
|
||||
/*----------------------------------------------------------------------------
|
||||
* Headers
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#include "WVariant.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif // __cplusplus
|
||||
|
||||
/*
|
||||
NRF52 PRO MICRO PIN ASSIGNMENT
|
||||
|
||||
| Pin | Function | | Pin | Function |
|
||||
|-------|------------|---|---------|-------------|
|
||||
| Gnd | | | vbat | |
|
||||
| P0.06 | Serial2 RX | | vbat | |
|
||||
| P0.08 | Serial2 TX | | Gnd | |
|
||||
| Gnd | | | reset | |
|
||||
| Gnd | | | ext_vcc | *see 0.13 |
|
||||
| P0.17 | RXEN | | P0.31 | BATTERY_PIN |
|
||||
| P0.20 | GPS_RX | | P0.29 | BUSY |
|
||||
| P0.22 | GPS_TX | | P0.02 | MISO |
|
||||
| P0.24 | GPS_EN | | P1.15 | MOSI |
|
||||
| P1.00 | BUTTON_PIN | | P1.13 | CS |
|
||||
| P0.11 | SCL | | P1.11 | SCK |
|
||||
| P1.04 | SDA | | P0.10 | DIO1/IRQ |
|
||||
| P1.06 | Free pin | | P0.09 | RESET |
|
||||
| | | | | |
|
||||
| | Mid board | | | Internal |
|
||||
| P1.01 | Free pin | | 0.15 | LED |
|
||||
| P1.02 | Free pin | | 0.13 | 3V3_EN |
|
||||
| P1.07 | Free pin | | | |
|
||||
*/
|
||||
|
||||
// Number of pins defined in PinDescription array
|
||||
#define PINS_COUNT (48)
|
||||
#define NUM_DIGITAL_PINS (48)
|
||||
#define NUM_ANALOG_INPUTS (1)
|
||||
#define NUM_ANALOG_OUTPUTS (0)
|
||||
|
||||
// Pin 13 enables 3.3V periphery. If the Lora module is on this pin, then it should stay enabled at all times.
|
||||
#define PIN_3V3_EN (0 + 13) // P0.13
|
||||
|
||||
// Analog pins
|
||||
#define BATTERY_PIN (0 + 31) // P0.31 Battery ADC
|
||||
#define ADC_CHANNEL ADC1_GPIO4_CHANNEL
|
||||
#define ADC_RESOLUTION 14
|
||||
#define BATTERY_SENSE_RESOLUTION_BITS 12
|
||||
#define BATTERY_SENSE_RESOLUTION 4096.0
|
||||
// Definition of milliVolt per LSB => 3.0V ADC range and 12-bit ADC resolution = 3000mV/4096
|
||||
#define VBAT_MV_PER_LSB (0.73242188F)
|
||||
// Voltage divider value => 1.5M + 1M voltage divider on VBAT = (1.5M / (1M + 1.5M))
|
||||
#define VBAT_DIVIDER (0.6F)
|
||||
// Compensation factor for the VBAT divider
|
||||
#define VBAT_DIVIDER_COMP (1.73)
|
||||
// Fixed calculation of milliVolt from compensation value
|
||||
#define REAL_VBAT_MV_PER_LSB (VBAT_DIVIDER_COMP * VBAT_MV_PER_LSB)
|
||||
#undef AREF_VOLTAGE
|
||||
#define AREF_VOLTAGE 3.0
|
||||
#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
|
||||
#define ADC_MULTIPLIER VBAT_DIVIDER_COMP // REAL_VBAT_MV_PER_LSB
|
||||
#define VBAT_RAW_TO_SCALED(x) (REAL_VBAT_MV_PER_LSB * x)
|
||||
|
||||
// WIRE IC AND IIC PINS
|
||||
#define WIRE_INTERFACES_COUNT 1
|
||||
|
||||
#define PIN_WIRE_SDA (32 + 4) // P1.04
|
||||
#define PIN_WIRE_SCL (0 + 11) // P0.11
|
||||
|
||||
// LED
|
||||
#define PIN_LED1 (0 + 15) // P0.15
|
||||
#define LED_BUILTIN PIN_LED1
|
||||
// Actually red
|
||||
#define LED_BLUE PIN_LED1
|
||||
#define LED_STATE_ON 1 // State when LED is lit
|
||||
|
||||
// Button
|
||||
#define BUTTON_PIN (32 + 0) // P1.00
|
||||
|
||||
// GPS
|
||||
#define PIN_GPS_TX (0 + 22) // P0.22
|
||||
#define PIN_GPS_RX (0 + 20) // P0.20
|
||||
|
||||
#define PIN_GPS_EN (0 + 24) // P0.24
|
||||
#define GPS_POWER_TOGGLE
|
||||
#define GPS_UBLOX
|
||||
// define GPS_DEBUG
|
||||
|
||||
// UART interfaces
|
||||
#define PIN_SERIAL1_RX PIN_GPS_TX
|
||||
#define PIN_SERIAL1_TX PIN_GPS_RX
|
||||
|
||||
#define PIN_SERIAL2_RX (0 + 6) // P0.06
|
||||
#define PIN_SERIAL2_TX (0 + 8) // P0.08
|
||||
|
||||
// Serial interfaces
|
||||
#define SPI_INTERFACES_COUNT 1
|
||||
|
||||
#define PIN_SPI_MISO (0 + 2) // P0.02
|
||||
#define PIN_SPI_MOSI (32 + 15) // P1.15
|
||||
#define PIN_SPI_SCK (32 + 11) // P1.11
|
||||
|
||||
// LORA MODULES
|
||||
#define USE_LLCC68
|
||||
#define USE_SX1262
|
||||
|
||||
// LORA CONFIG
|
||||
#define SX126X_CS (32 + 13) // P1.13 FIXME - we really should define LORA_CS instead
|
||||
#define SX126X_DIO1 (0 + 10) // P0.10 IRQ
|
||||
#define SX126X_DIO2_AS_RF_SWITCH // Note for E22 modules: DIO2 is not attached internally to TXEN for automatic TX/RX switching,
|
||||
// so it needs connecting externally if it is used in this way
|
||||
#define SX126X_BUSY (0 + 29) // P0.29
|
||||
#define SX126X_RESET (0 + 9) // P0.09
|
||||
#define SX126X_RXEN (0 + 17) // P0.17
|
||||
#define SX126X_TXEN RADIOLIB_NC // Assuming that DIO2 is connected to TXEN pin. If not, TXEN must be connected.
|
||||
|
||||
/*
|
||||
On the SX1262, DIO3 sets the voltage for an external TCXO, if one is present. If one is not present, then this should not be used.
|
||||
|
||||
Ebyte
|
||||
e22-900mm22s has no TCXO
|
||||
e22-900m22s has TCXO
|
||||
e220-900mm22s has no TCXO, works with/without this definition, looks like DIO3 not connected at all
|
||||
|
||||
AI-thinker
|
||||
RA-01SH does not have TCXO
|
||||
|
||||
Waveshare
|
||||
Core1262 has TCXO
|
||||
|
||||
*/
|
||||
// #define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Arduino objects - C++ only
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#endif
|
||||
@@ -44,3 +44,35 @@ build_flags =
|
||||
${esp32_base.build_flags}
|
||||
-D DIY_V1
|
||||
-I variants/diy/hydra
|
||||
|
||||
|
||||
; Promicro + E22(0)-xxxMM / RA-01SH modules board variant - DIY - without TCXO
|
||||
[env:nrf52_promicro_diy_xtal]
|
||||
extends = nrf52840_base
|
||||
board = promicro-nrf52840
|
||||
board_level = extra
|
||||
build_flags = ${nrf52840_base.build_flags}
|
||||
-I variants/diy/nrf52_promicro_diy_xtal
|
||||
-D NRF52_PROMICRO_DIY
|
||||
-D OLED_RU
|
||||
-L "${platformio.libdeps_dir}/${this.__env__}/BSEC2 Software Library/src/cortex-m4/fpv4-sp-d16-hard"
|
||||
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/diy/nrf52_promicro_diy_xtal>
|
||||
lib_deps =
|
||||
${nrf52840_base.lib_deps}
|
||||
debug_tool = jlink
|
||||
|
||||
|
||||
; Promicro + E22(0)-xxxM / HT-RA62 modules board variant - DIY - with TCXO
|
||||
[env:nrf52_promicro_diy_tcxo]
|
||||
extends = nrf52840_base
|
||||
board = promicro-nrf52840
|
||||
board_level = extra
|
||||
build_flags = ${nrf52840_base.build_flags}
|
||||
-I variants/diy/nrf52_promicro_diy_tcxo
|
||||
-D NRF52_PROMICRO_DIY
|
||||
-D OLED_RU
|
||||
-L "${platformio.libdeps_dir}/${this.__env__}/BSEC2 Software Library/src/cortex-m4/fpv4-sp-d16-hard"
|
||||
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/diy/nrf52_promicro_diy_tcxo>
|
||||
lib_deps =
|
||||
${nrf52840_base.lib_deps}
|
||||
debug_tool = jlink
|
||||
@@ -18,6 +18,7 @@
|
||||
#define TFT_OFFSET_ROTATION 0
|
||||
#define SCREEN_ROTATE
|
||||
#define SCREEN_TRANSITION_FRAMERATE 5
|
||||
#define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
|
||||
|
||||
#define HAS_TOUCHSCREEN 1
|
||||
#define SCREEN_TOUCH_INT 16
|
||||
@@ -96,4 +97,4 @@
|
||||
#define SX126X_DIO2_AS_RF_SWITCH
|
||||
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
||||
// Internally the TTGO module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for the sx1262interface
|
||||
// code)
|
||||
// code)
|
||||
@@ -15,7 +15,7 @@ build_flags = ${nrf52840_base.build_flags} -Ivariants/t-echo
|
||||
-DEINK_LIMIT_FASTREFRESH=20 ; How many consecutive fast-refreshes are permitted
|
||||
-DEINK_LIMIT_RATE_BACKGROUND_SEC=30 ; Minimum interval between BACKGROUND updates
|
||||
-DEINK_LIMIT_RATE_RESPONSIVE_SEC=1 ; Minimum interval between RESPONSIVE updates
|
||||
-DEINK_LIMIT_GHOSTING_PX=2000 ; (Optional) How much image ghosting is tolerated
|
||||
; -DEINK_LIMIT_GHOSTING_PX=2000 ; (Optional) How much image ghosting is tolerated
|
||||
-DEINK_BACKGROUND_USES_FAST ; (Optional) Use FAST refresh for both BACKGROUND and RESPONSIVE, until a limit is reached.
|
||||
|
||||
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/t-echo>
|
||||
|
||||
@@ -65,6 +65,9 @@ extern "C" {
|
||||
#define PIN_BUTTON2 (0 + 18) // 0.18 is labeled on the board as RESET but we configure it in the bootloader as a regular GPIO
|
||||
#define PIN_BUTTON_TOUCH (0 + 11) // 0.11 is the soft touch button on T-Echo
|
||||
|
||||
#define BUTTON_CLICK_MS 400
|
||||
#define BUTTON_TOUCH_MS 200
|
||||
|
||||
/*
|
||||
* Analog pins
|
||||
*/
|
||||
@@ -203,6 +206,9 @@ External serial flash WP25R1635FZUIL0
|
||||
// To debug via the segger JLINK console rather than the CDC-ACM serial device
|
||||
// #define USE_SEGGER
|
||||
|
||||
// T-Echo does not have a free serial port for this module
|
||||
#define MESHTASTIC_EXCLUDE_SERIAL 1
|
||||
|
||||
// Battery
|
||||
// The battery sense is hooked to pin A0 (4)
|
||||
// it is defined in the anlaolgue pin section of this file
|
||||
|
||||
Reference in New Issue
Block a user