rbxii3/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2026-01-25 19:27:28 +00:00
Code Issues Packages Projects Releases Wiki Activity

Trunk fmt

Browse Source
This commit is contained in:
ford-jones
2025-09-03 13:38:39 +12:00
parent 798040b5b8
commit c62f262f63
5 changed files with 24 additions and 27 deletions
Download Patch File Download Diff File Expand all files Collapse all files

15
variants/esp32s3/t-deck-pro/variant.h
View File

@@ -93,11 +93,10 @@
// Internally the TTGO module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for the sx1262interface
// code)
#define MODEM_POWER_EN 41
#define MODEM_PWRKEY 40
#define MODEM_RST 9
#define MODEM_RI 7
#define MODEM_DTR 8
#define MODEM_RX 10
#define MODEM_TX 11
#define MODEM_POWER_EN 41
#define MODEM_PWRKEY 40
#define MODEM_RST 9
#define MODEM_RI 7
#define MODEM_DTR 8
#define MODEM_RX 10
#define MODEM_TX 11

2
variants/nrf52840/heltec_mesh_solar/variant.cpp
View File

@@ -32,5 +32,5 @@ const uint32_t g_ADigitalPinMap[] = {
void initVariant()
{
pinMode(BQ4050_EMERGENCY_SHUTDOWN_PIN, INPUT);
pinMode(BQ4050_EMERGENCY_SHUTDOWN_PIN, INPUT);
}

21
variants/nrf52840/heltec_mesh_solar/variant.h
View File

@@ -39,16 +39,15 @@ extern "C" {
#define NUM_ANALOG_INPUTS (1)
#define NUM_ANALOG_OUTPUTS (0)
#define PIN_LED1 (0 + 12) // green (confirmed on 1.0 board)
#define LED_BLUE PIN_LED1 // fake for bluefruit library
#define LED_GREEN PIN_LED1
#define LED_BUILTIN LED_GREEN
#define LED_STATE_ON 0 // State when LED is lit
#define LED_STATE_ON 0 // State when LED is lit
#define HAS_NEOPIXEL // Enable the use of neopixels
#define NEOPIXEL_COUNT 1 // How many neopixels are connected
#define NEOPIXEL_DATA (32+15) // gpio pin used to send data to the neopixels
#define NEOPIXEL_DATA (32 + 15) // gpio pin used to send data to the neopixels
#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use
/*
@@ -74,13 +73,13 @@ No longer populated on PCB
// I2C bus 0
// Routed to footprint for PCF8563TS RTC
// Not populated on T114 V1, maybe in future?
#define PIN_WIRE_SDA (0 + 6) // P0.26
#define PIN_WIRE_SDA (0 + 6) // P0.26
#define PIN_WIRE_SCL (0 + 26) // P0.26
// I2C bus 1
// Available on header pins, for general use
#define PIN_WIRE1_SDA (0 + 30) // P0.30
#define PIN_WIRE1_SCL (0 + 5) // P0.13
#define PIN_WIRE1_SCL (0 + 5) // P0.13
/*
* Lora radio
@@ -89,14 +88,14 @@ No longer populated on PCB
#define USE_SX1262
// #define USE_SX1268
#define SX126X_CS (0 + 24) // FIXME - we really should define LORA_CS instead
#define LORA_CS (0 + 24)
#define LORA_CS (0 + 24)
#define SX126X_DIO1 (0 + 20)
// Note DIO2 is attached internally to the module to an analog switch for TX/RX switching
// #define SX1262_DIO3 (0 + 21)
// This is used as an *output* from the sx1262 and connected internally to power the tcxo, do not drive from the
// main
// CPU?
#define SX126X_BUSY (0 + 17)
#define SX126X_BUSY (0 + 17)
#define SX126X_RESET (0 + 25)
// Not really an E22 but TTGO seems to be trying to clone that
#define SX126X_DIO2_AS_RF_SWITCH
@@ -134,16 +133,16 @@ No longer populated on PCB
// For LORA, spi 0
#define PIN_SPI_MISO (0 + 23)
#define PIN_SPI_MOSI (0 + 22)
#define PIN_SPI_SCK (0 + 19)
#define PIN_SPI_SCK (0 + 19)
// #define PIN_PWR_EN (0 + 6)
// To debug via the segger JLINK console rather than the CDC-ACM serial device
// #define USE_SEGGER
#define BQ4050_SDA_PIN (32+1) // I2C data line pin
#define BQ4050_SCL_PIN (32+0) // I2C clock line pin
#define BQ4050_EMERGENCY_SHUTDOWN_PIN (32+3) // Emergency shutdown pin
#define BQ4050_SDA_PIN (32 + 1) // I2C data line pin
#define BQ4050_SCL_PIN (32 + 0) // I2C clock line pin
#define BQ4050_EMERGENCY_SHUTDOWN_PIN (32 + 3) // Emergency shutdown pin
#define HAS_RTC 0
#ifdef __cplusplus