rbxii3/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2026-01-18 15:57:24 +00:00
Code Issues Packages Projects Releases Wiki Activity

Revert "add a .clang-format file (#9154)" (#9172)

Browse Source 
I thought git would be smart enough to understand all the whitespace changes but even with all the flags I know to make it ignore theses it still blows up if there are identical changes on both sides.

I have a solution but it require creating a new commit at the merge base for each conflicting PR and merging it into develop.

I don't think blowing up all PRs is worth for now, maybe if we can coordinate this for V3 let's say.

This reverts commit 0d11331d18.
This commit is contained in:
Jorropo
2026-01-04 12:15:53 +01:00
committed by GitHub
parent 0d11331d18
commit beb268ff25
771 changed files with 83399 additions and 77967 deletions
Download Patch File Download Diff File Expand all files Collapse all files

81
variants/esp32c6/m5stack_unitc6l/variant.cpp
View File

@@ -22,50 +22,53 @@
#define reversebit(x, y) x ^= (0x01 << y)
#define getbit(x, y) ((x) >> (y)&0x01)
void i2c_read_byte(uint8_t addr, uint8_t reg, uint8_t *value) {
Wire.beginTransmission(addr);
Wire.write(reg);
Wire.endTransmission();
Wire.requestFrom(addr, 1);
*value = Wire.read();
void i2c_read_byte(uint8_t addr, uint8_t reg, uint8_t *value)
{
Wire.beginTransmission(addr);
Wire.write(reg);
Wire.endTransmission();
Wire.requestFrom(addr, 1);
*value = Wire.read();
}
/*******************************************************************/
void i2c_write_byte(uint8_t addr, uint8_t reg, uint8_t value) {
Wire.beginTransmission(addr);
Wire.write(reg);
Wire.write(value);
Wire.endTransmission();
void i2c_write_byte(uint8_t addr, uint8_t reg, uint8_t value)
{
Wire.beginTransmission(addr);
Wire.write(reg);
Wire.write(value);
Wire.endTransmission();
}
/*******************************************************************/
void c6l_init() {
// P7 LoRa Reset
// P6 RF Switch
// P5 LNA Enable
void c6l_init()
{
// P7 LoRa Reset
// P6 RF Switch
// P5 LNA Enable
printf("pi4io_init\n");
uint8_t in_data;
i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_CHIP_RESET, 0xFF);
vTaskDelay(10 / portTICK_PERIOD_MS);
i2c_read_byte(PI4IO_M_ADDR, PI4IO_REG_CHIP_RESET, &in_data);
vTaskDelay(10 / portTICK_PERIOD_MS);
i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_IO_DIR, 0b11000000); // 0: input 1: output
vTaskDelay(10 / portTICK_PERIOD_MS);
i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_OUT_H_IM, 0b00111100); // 使用到的引脚关闭High-Impedance
vTaskDelay(10 / portTICK_PERIOD_MS);
i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_PULL_SEL, 0b11000011); // pull up/down select, 0 down, 1 up
vTaskDelay(10 / portTICK_PERIOD_MS);
i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_PULL_EN, 0b11000011); // pull up/down enable, 0 disable, 1 enable
vTaskDelay(10 / portTICK_PERIOD_MS);
i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_IN_DEF_STA, 0b00000011); // P0 P1 默认高电平, 按键按下触发中断
vTaskDelay(10 / portTICK_PERIOD_MS);
i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_INT_MASK, 0b11111100); // P0 P1 中断使能 0 enable, 1 disable
vTaskDelay(10 / portTICK_PERIOD_MS);
i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_OUT_SET, 0b10000000); // 默认输出为0
vTaskDelay(10 / portTICK_PERIOD_MS);
i2c_read_byte(PI4IO_M_ADDR, PI4IO_REG_IRQ_STA, &in_data); // 读取IRQ_STA清除标志
printf("pi4io_init\n");
uint8_t in_data;
i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_CHIP_RESET, 0xFF);
vTaskDelay(10 / portTICK_PERIOD_MS);
i2c_read_byte(PI4IO_M_ADDR, PI4IO_REG_CHIP_RESET, &in_data);
vTaskDelay(10 / portTICK_PERIOD_MS);
i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_IO_DIR, 0b11000000); // 0: input 1: output
vTaskDelay(10 / portTICK_PERIOD_MS);
i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_OUT_H_IM, 0b00111100); // 使用到的引脚关闭High-Impedance
vTaskDelay(10 / portTICK_PERIOD_MS);
i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_PULL_SEL, 0b11000011); // pull up/down select, 0 down, 1 up
vTaskDelay(10 / portTICK_PERIOD_MS);
i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_PULL_EN, 0b11000011); // pull up/down enable, 0 disable, 1 enable
vTaskDelay(10 / portTICK_PERIOD_MS);
i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_IN_DEF_STA, 0b00000011); // P0 P1 默认高电平, 按键按下触发中断
vTaskDelay(10 / portTICK_PERIOD_MS);
i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_INT_MASK, 0b11111100); // P0 P1 中断使能 0 enable, 1 disable
vTaskDelay(10 / portTICK_PERIOD_MS);
i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_OUT_SET, 0b10000000); // 默认输出为0
vTaskDelay(10 / portTICK_PERIOD_MS);
i2c_read_byte(PI4IO_M_ADDR, PI4IO_REG_IRQ_STA, &in_data); // 读取IRQ_STA清除标志
i2c_read_byte(PI4IO_M_ADDR, PI4IO_REG_OUT_SET, &in_data);
setbit(in_data, 6); // HIGH
i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_OUT_SET, in_data);
i2c_read_byte(PI4IO_M_ADDR, PI4IO_REG_OUT_SET, &in_data);
setbit(in_data, 6); // HIGH
i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_OUT_SET, in_data);
}