rbxii3/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2026-02-02 07:01:54 +00:00
Code Issues Packages Projects Releases Wiki Activity

Revert "add a .clang-format file (#9154)" (#9172)

Browse Source 
I thought git would be smart enough to understand all the whitespace changes but even with all the flags I know to make it ignore theses it still blows up if there are identical changes on both sides.

I have a solution but it require creating a new commit at the merge base for each conflicting PR and merging it into develop.

I don't think blowing up all PRs is worth for now, maybe if we can coordinate this for V3 let's say.

This reverts commit 0d11331d18.
This commit is contained in:
Jorropo
2026-01-04 12:15:53 +01:00
committed by GitHub
parent 0d11331d18
commit beb268ff25
771 changed files with 83399 additions and 77967 deletions
Download Patch File Download Diff File Expand all files Collapse all files

598
src/sleep.cpp
View File

@@ -76,288 +76,294 @@ RTC_DATA_ATTR int bootCount = 0;
* We leave CPU at full speed during init, but once loop is called switch to low speed (for a 50% power savings)
*
*/
void setCPUFast(bool on) {
void setCPUFast(bool on)
{
#if defined(ARCH_ESP32) && HAS_WIFI && !HAS_TFT
if (isWifiAvailable()) {
/*
*
* There's a newly introduced bug in the espressif framework where WiFi is
* unstable when the frequency is less than 240MHz.
*
* This mostly impacts WiFi AP mode but we'll bump the frequency for
* all WiFi use cases.
* (Added: Dec 23, 2021 by Jm Casler)
*/
if (isWifiAvailable()) {
/*
*
* There's a newly introduced bug in the espressif framework where WiFi is
* unstable when the frequency is less than 240MHz.
*
* This mostly impacts WiFi AP mode but we'll bump the frequency for
* all WiFi use cases.
* (Added: Dec 23, 2021 by Jm Casler)
*/
#ifndef CONFIG_IDF_TARGET_ESP32C3
LOG_DEBUG("Set CPU to 240MHz because WiFi is in use");
setCpuFrequencyMhz(240);
LOG_DEBUG("Set CPU to 240MHz because WiFi is in use");
setCpuFrequencyMhz(240);
#endif
return;
}
return;
}
// The Heltec LORA32 V1 runs at 26 MHz base frequency and doesn't react well to switching to 80 MHz...
#if !defined(ARDUINO_HELTEC_WIFI_LORA_32) && !defined(CONFIG_IDF_TARGET_ESP32C3)
setCpuFrequencyMhz(on ? 240 : 80);
setCpuFrequencyMhz(on ? 240 : 80);
#endif
#endif
}
// Perform power on init that we do on each wake from deep sleep
void initDeepSleep() {
void initDeepSleep()
{
#ifdef ARCH_ESP32
bootCount++;
const char *reason;
wakeCause = esp_sleep_get_wakeup_cause();
bootCount++;
const char *reason;
wakeCause = esp_sleep_get_wakeup_cause();
switch (wakeCause) {
case ESP_SLEEP_WAKEUP_EXT0:
reason = "ext0 RTC_IO";
break;
case ESP_SLEEP_WAKEUP_EXT1:
reason = "ext1 RTC_CNTL";
break;
case ESP_SLEEP_WAKEUP_TIMER:
reason = "timer";
break;
case ESP_SLEEP_WAKEUP_TOUCHPAD:
reason = "touchpad";
break;
case ESP_SLEEP_WAKEUP_ULP:
reason = "ULP program";
break;
default:
reason = "reset";
break;
}
/*
Not using yet because we are using wake on all buttons being low
switch (wakeCause) {
case ESP_SLEEP_WAKEUP_EXT0:
reason = "ext0 RTC_IO";
break;
case ESP_SLEEP_WAKEUP_EXT1:
reason = "ext1 RTC_CNTL";
break;
case ESP_SLEEP_WAKEUP_TIMER:
reason = "timer";
break;
case ESP_SLEEP_WAKEUP_TOUCHPAD:
reason = "touchpad";
break;
case ESP_SLEEP_WAKEUP_ULP:
reason = "ULP program";
break;
default:
reason = "reset";
break;
}
/*
Not using yet because we are using wake on all buttons being low
wakeButtons = esp_sleep_get_ext1_wakeup_status(); // If one of these buttons is set it was the reason we woke
if (wakeCause == ESP_SLEEP_WAKEUP_EXT1 && !wakeButtons) // we must have been using the 'all buttons rule for waking'
to support busted boards, assume button one was pressed wakeButtons = ((uint64_t)1) << buttons.gpios[0];
*/
wakeButtons = esp_sleep_get_ext1_wakeup_status(); // If one of these buttons is set it was the reason we woke
if (wakeCause == ESP_SLEEP_WAKEUP_EXT1 && !wakeButtons) // we must have been using the 'all buttons rule for waking' to
support busted boards, assume button one was pressed wakeButtons = ((uint64_t)1) << buttons.gpios[0];
*/
#if defined(DEBUG_PORT) && !defined(DEBUG_MUTE)
// If we booted because our timer ran out or the user pressed reset, send those as fake events
RESET_REASON hwReason = rtc_get_reset_reason(0);
// If we booted because our timer ran out or the user pressed reset, send those as fake events
RESET_REASON hwReason = rtc_get_reset_reason(0);
if (hwReason == RTCWDT_BROWN_OUT_RESET)
reason = "brownout";
if (hwReason == RTCWDT_BROWN_OUT_RESET)
reason = "brownout";
if (hwReason == TG0WDT_SYS_RESET)
reason = "taskWatchdog";
if (hwReason == TG0WDT_SYS_RESET)
reason = "taskWatchdog";
if (hwReason == TG1WDT_SYS_RESET)
reason = "intWatchdog";
if (hwReason == TG1WDT_SYS_RESET)
reason = "intWatchdog";
LOG_INFO("Booted, wake cause %d (boot count %d), reset_reason=%s", wakeCause, bootCount, reason);
LOG_INFO("Booted, wake cause %d (boot count %d), reset_reason=%s", wakeCause, bootCount, reason);
#endif
#if SOC_RTCIO_HOLD_SUPPORTED
// If waking from sleep, release any and all RTC GPIOs
if (wakeCause != ESP_SLEEP_WAKEUP_UNDEFINED) {
LOG_DEBUG("Disable any holds on RTC IO pads");
for (uint8_t i = 0; i <= GPIO_NUM_MAX; i++) {
if (rtc_gpio_is_valid_gpio((gpio_num_t)i))
rtc_gpio_hold_dis((gpio_num_t)i);
// If waking from sleep, release any and all RTC GPIOs
if (wakeCause != ESP_SLEEP_WAKEUP_UNDEFINED) {
LOG_DEBUG("Disable any holds on RTC IO pads");
for (uint8_t i = 0; i <= GPIO_NUM_MAX; i++) {
if (rtc_gpio_is_valid_gpio((gpio_num_t)i))
rtc_gpio_hold_dis((gpio_num_t)i);
// ESP32 (original)
else if (GPIO_IS_VALID_OUTPUT_GPIO((gpio_num_t)i))
gpio_hold_dis((gpio_num_t)i);
// ESP32 (original)
else if (GPIO_IS_VALID_OUTPUT_GPIO((gpio_num_t)i))
gpio_hold_dis((gpio_num_t)i);
}
}
}
#endif
#endif
}
bool doPreflightSleep() {
if (preflightSleep.notifyObservers(NULL) != 0)
return false; // vetoed
else
return true;
bool doPreflightSleep()
{
if (preflightSleep.notifyObservers(NULL) != 0)
return false; // vetoed
else
return true;
}
/// Tell devices we are going to sleep and wait for them to handle things
static void waitEnterSleep(bool skipPreflight = false) {
if (!skipPreflight) {
uint32_t now = millis();
while (!doPreflightSleep()) {
delay(100); // Kinda yucky - wait until radio says say we can shutdown (finished in process sends/receives)
static void waitEnterSleep(bool skipPreflight = false)
{
if (!skipPreflight) {
uint32_t now = millis();
while (!doPreflightSleep()) {
delay(100); // Kinda yucky - wait until radio says say we can shutdown (finished in process sends/receives)
if (!Throttle::isWithinTimespanMs(now,
THIRTY_SECONDS_MS)) { // If we wait too long just report an error and go to sleep
RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_SLEEP_ENTER_WAIT);
assert(0); // FIXME - for now we just restart, need to fix bug #167
break;
}
if (!Throttle::isWithinTimespanMs(now,
THIRTY_SECONDS_MS)) { // If we wait too long just report an error and go to sleep
RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_SLEEP_ENTER_WAIT);
assert(0); // FIXME - for now we just restart, need to fix bug #167
break;
}
}
}
}
// Code that still needs to be moved into notifyObservers
console->flush(); // send all our characters before we stop cpu clock
setBluetoothEnable(false); // has to be off before calling light sleep
// Code that still needs to be moved into notifyObservers
console->flush(); // send all our characters before we stop cpu clock
setBluetoothEnable(false); // has to be off before calling light sleep
}
void doDeepSleep(uint32_t msecToWake, bool skipPreflight = false, bool skipSaveNodeDb = false) {
if (INCLUDE_vTaskSuspend && (msecToWake == portMAX_DELAY)) {
LOG_INFO("Enter deep sleep forever");
} else {
LOG_INFO("Enter deep sleep for %u seconds", msecToWake / 1000);
}
void doDeepSleep(uint32_t msecToWake, bool skipPreflight = false, bool skipSaveNodeDb = false)
{
if (INCLUDE_vTaskSuspend && (msecToWake == portMAX_DELAY)) {
LOG_INFO("Enter deep sleep forever");
} else {
LOG_INFO("Enter deep sleep for %u seconds", msecToWake / 1000);
}
// not using wifi yet, but once we are this is needed to shutoff the radio hw
// esp_wifi_stop();
waitEnterSleep(skipPreflight);
// not using wifi yet, but once we are this is needed to shutoff the radio hw
// esp_wifi_stop();
waitEnterSleep(skipPreflight);
#if defined(ARCH_ESP32) && !MESHTASTIC_EXCLUDE_BLUETOOTH
// Full shutdown of bluetooth hardware
if (nimbleBluetooth)
nimbleBluetooth->deinit();
// Full shutdown of bluetooth hardware
if (nimbleBluetooth)
nimbleBluetooth->deinit();
#endif
#ifdef ARCH_ESP32
if (!shouldLoraWake(msecToWake))
notifyDeepSleep.notifyObservers(NULL);
if (!shouldLoraWake(msecToWake))
notifyDeepSleep.notifyObservers(NULL);
#else
notifyDeepSleep.notifyObservers(NULL);
notifyDeepSleep.notifyObservers(NULL);
#endif
powerMon->setState(meshtastic_PowerMon_State_CPU_DeepSleep);
if (screen)
screen->doDeepSleep(); // datasheet says this will draw only 10ua
powerMon->setState(meshtastic_PowerMon_State_CPU_DeepSleep);
if (screen)
screen->doDeepSleep(); // datasheet says this will draw only 10ua
if (!skipSaveNodeDb) {
nodeDB->saveToDisk();
}
if (!skipSaveNodeDb) {
nodeDB->saveToDisk();
}
#ifdef PIN_POWER_EN
digitalWrite(PIN_POWER_EN, LOW);
pinMode(PIN_POWER_EN, INPUT); // power off peripherals
// pinMode(PIN_POWER_EN1, INPUT_PULLDOWN);
digitalWrite(PIN_POWER_EN, LOW);
pinMode(PIN_POWER_EN, INPUT); // power off peripherals
// pinMode(PIN_POWER_EN1, INPUT_PULLDOWN);
#endif
#ifdef RAK_WISMESH_TAP_V2
digitalWrite(SDCARD_CS, LOW);
digitalWrite(SDCARD_CS, LOW);
#endif
#ifdef TRACKER_T1000_E
#ifdef GNSS_AIROHA
digitalWrite(GPS_VRTC_EN, LOW);
digitalWrite(PIN_GPS_RESET, LOW);
digitalWrite(GPS_SLEEP_INT, LOW);
digitalWrite(GPS_RTC_INT, LOW);
pinMode(GPS_RESETB_OUT, OUTPUT);
digitalWrite(GPS_RESETB_OUT, LOW);
digitalWrite(GPS_VRTC_EN, LOW);
digitalWrite(PIN_GPS_RESET, LOW);
digitalWrite(GPS_SLEEP_INT, LOW);
digitalWrite(GPS_RTC_INT, LOW);
pinMode(GPS_RESETB_OUT, OUTPUT);
digitalWrite(GPS_RESETB_OUT, LOW);
#endif
#ifdef BUZZER_EN_PIN
digitalWrite(BUZZER_EN_PIN, LOW);
digitalWrite(BUZZER_EN_PIN, LOW);
#endif
#ifdef PIN_3V3_EN
digitalWrite(PIN_3V3_EN, LOW);
digitalWrite(PIN_3V3_EN, LOW);
#endif
#ifdef PIN_WD_EN
digitalWrite(PIN_WD_EN, LOW);
digitalWrite(PIN_WD_EN, LOW);
#endif
#endif
ledBlink.set(false);
ledBlink.set(false);
#ifdef RESET_OLED
digitalWrite(RESET_OLED, 1); // put the display in reset before killing its power
digitalWrite(RESET_OLED, 1); // put the display in reset before killing its power
#endif
#if defined(VEXT_ENABLE)
digitalWrite(VEXT_ENABLE, !VEXT_ON_VALUE); // turn on the display power
digitalWrite(VEXT_ENABLE, !VEXT_ON_VALUE); // turn on the display power
#endif
#ifdef ARCH_ESP32
if (shouldLoraWake(msecToWake)) {
enableLoraInterrupt();
}
if (shouldLoraWake(msecToWake)) {
enableLoraInterrupt();
}
#ifdef BUTTON_PIN
// Avoid leakage through button pin
if (GPIO_IS_VALID_OUTPUT_GPIO(BUTTON_PIN)) {
// Avoid leakage through button pin
if (GPIO_IS_VALID_OUTPUT_GPIO(BUTTON_PIN)) {
#ifdef BUTTON_NEED_PULLUP
pinMode(BUTTON_PIN, INPUT_PULLUP);
pinMode(BUTTON_PIN, INPUT_PULLUP);
#else
pinMode(BUTTON_PIN, INPUT);
pinMode(BUTTON_PIN, INPUT);
#endif
gpio_hold_en((gpio_num_t)BUTTON_PIN);
}
gpio_hold_en((gpio_num_t)BUTTON_PIN);
}
#endif
#ifdef SENSECAP_INDICATOR
// Portexpander definition does not pass GPIO_IS_VALID_OUTPUT_GPIO
pinMode(LORA_CS, OUTPUT);
digitalWrite(LORA_CS, HIGH);
gpio_hold_en((gpio_num_t)LORA_CS);
#elif defined(ELECROW_PANEL)
// Elecrow panels do not use LORA_CS, do nothing
#else
if (GPIO_IS_VALID_OUTPUT_GPIO(LORA_CS)) {
// LoRa CS (RADIO_NSS) needs to stay HIGH, even during deep sleep
// Portexpander definition does not pass GPIO_IS_VALID_OUTPUT_GPIO
pinMode(LORA_CS, OUTPUT);
digitalWrite(LORA_CS, HIGH);
gpio_hold_en((gpio_num_t)LORA_CS);
}
#elif defined(ELECROW_PANEL)
// Elecrow panels do not use LORA_CS, do nothing
#else
if (GPIO_IS_VALID_OUTPUT_GPIO(LORA_CS)) {
// LoRa CS (RADIO_NSS) needs to stay HIGH, even during deep sleep
pinMode(LORA_CS, OUTPUT);
digitalWrite(LORA_CS, HIGH);
gpio_hold_en((gpio_num_t)LORA_CS);
}
#endif
#endif
#ifdef HAS_PPM
if (PPM) {
LOG_INFO("PMM shutdown");
console->flush();
PPM->shutdown();
}
if (PPM) {
LOG_INFO("PMM shutdown");
console->flush();
PPM->shutdown();
}
#endif
#ifdef HAS_PMU
if (pmu_found && PMU) {
// Obsolete comment: from back when we we used to receive lora packets while CPU was in deep sleep.
// We no longer do that, because our light-sleep current draws are low enough and it provides fast start/low cost
// wake. We currently use deep sleep only for 'we want our device to actually be off - because our battery is
// critically low'. So in deep sleep we DO shut down power to LORA (and when we boot later we completely reinit it)
//
// No need to turn this off if the power draw in sleep mode really is just 0.2uA and turning it off would
// leave floating input for the IRQ line
// If we want to leave the radio receiving in would be 11.5mA current draw, but most of the time it is just waiting
// in its sequencer (true?) so the average power draw should be much lower even if we were listening for packets
// all the time.
PMU->setChargingLedMode(XPOWERS_CHG_LED_OFF);
if (pmu_found && PMU) {
// Obsolete comment: from back when we we used to receive lora packets while CPU was in deep sleep.
// We no longer do that, because our light-sleep current draws are low enough and it provides fast start/low cost
// wake. We currently use deep sleep only for 'we want our device to actually be off - because our battery is
// critically low'. So in deep sleep we DO shut down power to LORA (and when we boot later we completely reinit it)
//
// No need to turn this off if the power draw in sleep mode really is just 0.2uA and turning it off would
// leave floating input for the IRQ line
// If we want to leave the radio receiving in would be 11.5mA current draw, but most of the time it is just waiting
// in its sequencer (true?) so the average power draw should be much lower even if we were listening for packets
// all the time.
PMU->setChargingLedMode(XPOWERS_CHG_LED_OFF);
uint8_t model = PMU->getChipModel();
if (model == XPOWERS_AXP2101) {
if (HW_VENDOR == meshtastic_HardwareModel_TBEAM) {
// t-beam v1.2 radio power channel
PMU->disablePowerOutput(XPOWERS_ALDO2); // lora radio power channel
} else if (HW_VENDOR == meshtastic_HardwareModel_LILYGO_TBEAM_S3_CORE || HW_VENDOR == meshtastic_HardwareModel_T_WATCH_S3) {
PMU->disablePowerOutput(XPOWERS_ALDO3); // lora radio power channel
}
} else if (model == XPOWERS_AXP192) {
// t-beam v1.1 radio power channel
PMU->disablePowerOutput(XPOWERS_LDO2); // lora radio power channel
uint8_t model = PMU->getChipModel();
if (model == XPOWERS_AXP2101) {
if (HW_VENDOR == meshtastic_HardwareModel_TBEAM) {
// t-beam v1.2 radio power channel
PMU->disablePowerOutput(XPOWERS_ALDO2); // lora radio power channel
} else if (HW_VENDOR == meshtastic_HardwareModel_LILYGO_TBEAM_S3_CORE ||
HW_VENDOR == meshtastic_HardwareModel_T_WATCH_S3) {
PMU->disablePowerOutput(XPOWERS_ALDO3); // lora radio power channel
}
} else if (model == XPOWERS_AXP192) {
// t-beam v1.1 radio power channel
PMU->disablePowerOutput(XPOWERS_LDO2); // lora radio power channel
}
if (msecToWake == portMAX_DELAY) {
LOG_INFO("PMU shutdown");
console->flush();
PMU->shutdown();
}
}
if (msecToWake == portMAX_DELAY) {
LOG_INFO("PMU shutdown");
console->flush();
PMU->shutdown();
}
}
#endif
#if !MESHTASTIC_EXCLUDE_I2C && defined(ARCH_ESP32) && defined(I2C_SDA)
// Added by https://github.com/meshtastic/firmware/pull/4418
// Possibly to support Heltec Capsule Sensor?
Wire.end();
pinMode(I2C_SDA, ANALOG);
pinMode(I2C_SCL, ANALOG);
// Added by https://github.com/meshtastic/firmware/pull/4418
// Possibly to support Heltec Capsule Sensor?
Wire.end();
pinMode(I2C_SDA, ANALOG);
pinMode(I2C_SCL, ANALOG);
#endif
console->flush();
cpuDeepSleep(msecToWake);
console->flush();
cpuDeepSleep(msecToWake);
}
#ifdef ARCH_ESP32
@@ -368,130 +374,131 @@ void doDeepSleep(uint32_t msecToWake, bool skipPreflight = false, bool skipSaveN
*/
esp_sleep_wakeup_cause_t doLightSleep(uint64_t sleepMsec) // FIXME, use a more reasonable default
{
// LOG_DEBUG("Enter light sleep");
// LOG_DEBUG("Enter light sleep");
// LORA_DIO1 is an extended IO pin. Setting it as a wake-up pin will cause problems, such as the indicator device not
// entering LightSleep.
// LORA_DIO1 is an extended IO pin. Setting it as a wake-up pin will cause problems, such as the indicator device not entering
// LightSleep.
#if defined(SENSECAP_INDICATOR)
return ESP_SLEEP_WAKEUP_TIMER;
return ESP_SLEEP_WAKEUP_TIMER;
#endif
waitEnterSleep(false);
notifyLightSleep.notifyObservers(NULL); // Button interrupts are detached here
waitEnterSleep(false);
notifyLightSleep.notifyObservers(NULL); // Button interrupts are detached here
uint64_t sleepUsec = sleepMsec * 1000LL;
uint64_t sleepUsec = sleepMsec * 1000LL;
// NOTE! ESP docs say we must disable bluetooth and wifi before light sleep
// NOTE! ESP docs say we must disable bluetooth and wifi before light sleep
// We want RTC peripherals to stay on
esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON);
// We want RTC peripherals to stay on
esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON);
#if defined(BUTTON_PIN) && defined(BUTTON_NEED_PULLUP)
gpio_pullup_en((gpio_num_t)BUTTON_PIN);
gpio_pullup_en((gpio_num_t)BUTTON_PIN);
#endif
#ifdef SERIAL0_RX_GPIO
// We treat the serial port as a GPIO for a fast/low power way of waking, if we see a rising edge that means
// someone started to send something
// We treat the serial port as a GPIO for a fast/low power way of waking, if we see a rising edge that means
// someone started to send something
// gpio 3 is RXD for serialport 0 on ESP32
// Send a few Z characters to wake the port
// gpio 3 is RXD for serialport 0 on ESP32
// Send a few Z characters to wake the port
// this doesn't work on TBEAMs when the USB is depowered (causes bogus interrupts)
// So we disable this "wake on serial" feature - because now when a TBEAM (only) has power connected it
// never tries to go to sleep if the user is using the API
// gpio_wakeup_enable((gpio_num_t)SERIAL0_RX_GPIO, GPIO_INTR_LOW_LEVEL);
// this doesn't work on TBEAMs when the USB is depowered (causes bogus interrupts)
// So we disable this "wake on serial" feature - because now when a TBEAM (only) has power connected it
// never tries to go to sleep if the user is using the API
// gpio_wakeup_enable((gpio_num_t)SERIAL0_RX_GPIO, GPIO_INTR_LOW_LEVEL);
// doesn't help - I think the USB-UART chip losing power is pulling the signal low
// gpio_pullup_en((gpio_num_t)SERIAL0_RX_GPIO);
// doesn't help - I think the USB-UART chip losing power is pulling the signal low
// gpio_pullup_en((gpio_num_t)SERIAL0_RX_GPIO);
// alas - can only work if using the refclock, which is limited to about 9600 bps
// assert(uart_set_wakeup_threshold(UART_NUM_0, 3) == ESP_OK);
// assert(esp_sleep_enable_uart_wakeup(0) == ESP_OK);
// alas - can only work if using the refclock, which is limited to about 9600 bps
// assert(uart_set_wakeup_threshold(UART_NUM_0, 3) == ESP_OK);
// assert(esp_sleep_enable_uart_wakeup(0) == ESP_OK);
#endif
#ifdef ROTARY_PRESS
// The enableLoraInterrupt() method is using ext0_wakeup, so we are forced to use GPIO wakeup
gpio_wakeup_enable((gpio_num_t)ROTARY_PRESS, GPIO_INTR_LOW_LEVEL);
// The enableLoraInterrupt() method is using ext0_wakeup, so we are forced to use GPIO wakeup
gpio_wakeup_enable((gpio_num_t)ROTARY_PRESS, GPIO_INTR_LOW_LEVEL);
#endif
#ifdef KB_INT
gpio_wakeup_enable((gpio_num_t)KB_INT, GPIO_INTR_LOW_LEVEL);
gpio_wakeup_enable((gpio_num_t)KB_INT, GPIO_INTR_LOW_LEVEL);
#endif
#ifdef BUTTON_PIN
gpio_num_t pin = (gpio_num_t)(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN);
gpio_wakeup_enable(pin, GPIO_INTR_LOW_LEVEL);
gpio_num_t pin = (gpio_num_t)(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN);
gpio_wakeup_enable(pin, GPIO_INTR_LOW_LEVEL);
#endif
#ifdef INPUTDRIVER_ENCODER_BTN
gpio_wakeup_enable((gpio_num_t)INPUTDRIVER_ENCODER_BTN, GPIO_INTR_LOW_LEVEL);
gpio_wakeup_enable((gpio_num_t)INPUTDRIVER_ENCODER_BTN, GPIO_INTR_LOW_LEVEL);
#endif
#if defined(WAKE_ON_TOUCH)
gpio_wakeup_enable((gpio_num_t)SCREEN_TOUCH_INT, GPIO_INTR_LOW_LEVEL);
gpio_wakeup_enable((gpio_num_t)SCREEN_TOUCH_INT, GPIO_INTR_LOW_LEVEL);
#endif
enableLoraInterrupt();
enableLoraInterrupt();
#ifdef PMU_IRQ
// wake due to PMU can happen repeatedly if there is no battery installed or the battery fills
if (pmu_found)
gpio_wakeup_enable((gpio_num_t)PMU_IRQ, GPIO_INTR_LOW_LEVEL); // pmu irq
// wake due to PMU can happen repeatedly if there is no battery installed or the battery fills
if (pmu_found)
gpio_wakeup_enable((gpio_num_t)PMU_IRQ, GPIO_INTR_LOW_LEVEL); // pmu irq
#endif
auto res = esp_sleep_enable_gpio_wakeup();
if (res != ESP_OK) {
LOG_ERROR("esp_sleep_enable_gpio_wakeup result %d", res);
}
assert(res == ESP_OK);
res = esp_sleep_enable_timer_wakeup(sleepUsec);
if (res != ESP_OK) {
LOG_ERROR("esp_sleep_enable_timer_wakeup result %d", res);
}
assert(res == ESP_OK);
auto res = esp_sleep_enable_gpio_wakeup();
if (res != ESP_OK) {
LOG_ERROR("esp_sleep_enable_gpio_wakeup result %d", res);
}
assert(res == ESP_OK);
res = esp_sleep_enable_timer_wakeup(sleepUsec);
if (res != ESP_OK) {
LOG_ERROR("esp_sleep_enable_timer_wakeup result %d", res);
}
assert(res == ESP_OK);
console->flush();
res = esp_light_sleep_start();
if (res != ESP_OK) {
LOG_ERROR("esp_light_sleep_start result %d", res);
}
// commented out because it's not that crucial;
// if it sporadically happens the node will go into light sleep during the next round
// assert(res == ESP_OK);
console->flush();
res = esp_light_sleep_start();
if (res != ESP_OK) {
LOG_ERROR("esp_light_sleep_start result %d", res);
}
// commented out because it's not that crucial;
// if it sporadically happens the node will go into light sleep during the next round
// assert(res == ESP_OK);
#ifdef ROTARY_PRESS
gpio_wakeup_disable((gpio_num_t)ROTARY_PRESS);
gpio_wakeup_disable((gpio_num_t)ROTARY_PRESS);
#endif
#ifdef KB_INT
gpio_wakeup_disable((gpio_num_t)KB_INT);
gpio_wakeup_disable((gpio_num_t)KB_INT);
#endif
#ifdef BUTTON_PIN
// Disable wake-on-button interrupt. Re-attach normal button-interrupts
gpio_wakeup_disable(pin);
// Disable wake-on-button interrupt. Re-attach normal button-interrupts
gpio_wakeup_disable(pin);
#endif
#if defined(INPUTDRIVER_ENCODER_BTN)
gpio_wakeup_disable((gpio_num_t)INPUTDRIVER_ENCODER_BTN);
gpio_wakeup_disable((gpio_num_t)INPUTDRIVER_ENCODER_BTN);
#endif
#if defined(WAKE_ON_TOUCH)
gpio_wakeup_disable((gpio_num_t)SCREEN_TOUCH_INT);
gpio_wakeup_disable((gpio_num_t)SCREEN_TOUCH_INT);
#endif
#if !defined(SOC_PM_SUPPORT_EXT_WAKEUP) && defined(LORA_DIO1) && (LORA_DIO1 != RADIOLIB_NC)
if (radioType != RF95_RADIO) {
gpio_wakeup_disable((gpio_num_t)LORA_DIO1);
}
if (radioType != RF95_RADIO) {
gpio_wakeup_disable((gpio_num_t)LORA_DIO1);
}
#endif
#if defined(RF95_IRQ) && (RF95_IRQ != RADIOLIB_NC)
if (radioType == RF95_RADIO) {
gpio_wakeup_disable((gpio_num_t)RF95_IRQ);
}
if (radioType == RF95_RADIO) {
gpio_wakeup_disable((gpio_num_t)RF95_IRQ);
}
#endif
esp_sleep_wakeup_cause_t cause = esp_sleep_get_wakeup_cause();
notifyLightSleepEnd.notifyObservers(cause); // Button interrupts are reattached here
esp_sleep_wakeup_cause_t cause = esp_sleep_get_wakeup_cause();
notifyLightSleepEnd.notifyObservers(cause); // Button interrupts are reattached here
#ifdef BUTTON_PIN
if (cause == ESP_SLEEP_WAKEUP_GPIO) {
LOG_INFO("Exit light sleep gpio: btn=%d", !digitalRead(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN));
} else
if (cause == ESP_SLEEP_WAKEUP_GPIO) {
LOG_INFO("Exit light sleep gpio: btn=%d",
!digitalRead(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN));
} else
#endif
{
LOG_INFO("Exit light sleep cause: %d", cause);
}
{
LOG_INFO("Exit light sleep cause: %d", cause);
}
return cause;
return cause;
}
// not legal on the stock android ESP build
@@ -503,68 +510,73 @@ esp_sleep_wakeup_cause_t doLightSleep(uint64_t sleepMsec) // FIXME, use a more r
*
* supposedly according to https://github.com/espressif/arduino-esp32/issues/475 this is already done in arduino
*/
void enableModemSleep() {
void enableModemSleep()
{
#if ESP_ARDUINO_VERSION >= ESP_ARDUINO_VERSION_VAL(3, 0, 0)
static esp_pm_config_t esp32_config; // filled with zeros because bss
static esp_pm_config_t esp32_config; // filled with zeros because bss
#else
static esp_pm_config_esp32_t esp32_config; // filled with zeros because bss
static esp_pm_config_esp32_t esp32_config; // filled with zeros because bss
#endif
#if CONFIG_IDF_TARGET_ESP32S3
esp32_config.max_freq_mhz = CONFIG_ESP32S3_DEFAULT_CPU_FREQ_MHZ;
esp32_config.max_freq_mhz = CONFIG_ESP32S3_DEFAULT_CPU_FREQ_MHZ;
#elif CONFIG_IDF_TARGET_ESP32S2
esp32_config.max_freq_mhz = CONFIG_ESP32S2_DEFAULT_CPU_FREQ_MHZ;
esp32_config.max_freq_mhz = CONFIG_ESP32S2_DEFAULT_CPU_FREQ_MHZ;
#elif CONFIG_IDF_TARGET_ESP32C6
esp32_config.max_freq_mhz = CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ;
esp32_config.max_freq_mhz = CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ;
#elif CONFIG_IDF_TARGET_ESP32C3
esp32_config.max_freq_mhz = CONFIG_ESP32C3_DEFAULT_CPU_FREQ_MHZ;
esp32_config.max_freq_mhz = CONFIG_ESP32C3_DEFAULT_CPU_FREQ_MHZ;
#else
esp32_config.max_freq_mhz = CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ;
esp32_config.max_freq_mhz = CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ;
#endif
esp32_config.min_freq_mhz = 20; // 10Mhz is minimum recommended
esp32_config.light_sleep_enable = false;
int rv = esp_pm_configure(&esp32_config);
LOG_DEBUG("Sleep request result %x", rv);
esp32_config.min_freq_mhz = 20; // 10Mhz is minimum recommended
esp32_config.light_sleep_enable = false;
int rv = esp_pm_configure(&esp32_config);
LOG_DEBUG("Sleep request result %x", rv);
}
bool shouldLoraWake(uint32_t msecToWake) { return msecToWake < portMAX_DELAY && (config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER); }
bool shouldLoraWake(uint32_t msecToWake)
{
return msecToWake < portMAX_DELAY && (config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER);
}
void enableLoraInterrupt() {
esp_err_t res;
void enableLoraInterrupt()
{
esp_err_t res;
#if SOC_PM_SUPPORT_EXT_WAKEUP && defined(LORA_DIO1) && (LORA_DIO1 != RADIOLIB_NC)
res = gpio_pulldown_en((gpio_num_t)LORA_DIO1);
if (res != ESP_OK) {
LOG_ERROR("gpio_pulldown_en(LORA_DIO1) result %d", res);
}
res = gpio_pulldown_en((gpio_num_t)LORA_DIO1);
if (res != ESP_OK) {
LOG_ERROR("gpio_pulldown_en(LORA_DIO1) result %d", res);
}
#if defined(LORA_RESET) && (LORA_RESET != RADIOLIB_NC)
res = gpio_pullup_en((gpio_num_t)LORA_RESET);
if (res != ESP_OK) {
LOG_ERROR("gpio_pullup_en(LORA_RESET) result %d", res);
}
res = gpio_pullup_en((gpio_num_t)LORA_RESET);
if (res != ESP_OK) {
LOG_ERROR("gpio_pullup_en(LORA_RESET) result %d", res);
}
#endif
#if defined(LORA_CS) && (LORA_CS != RADIOLIB_NC) && !defined(ELECROW_PANEL)
gpio_pullup_en((gpio_num_t)LORA_CS);
gpio_pullup_en((gpio_num_t)LORA_CS);
#endif
#if defined(USE_GC1109_PA)
gpio_pullup_en((gpio_num_t)LORA_PA_POWER);
gpio_pullup_en((gpio_num_t)LORA_PA_EN);
gpio_pulldown_en((gpio_num_t)LORA_PA_TX_EN);
gpio_pullup_en((gpio_num_t)LORA_PA_POWER);
gpio_pullup_en((gpio_num_t)LORA_PA_EN);
gpio_pulldown_en((gpio_num_t)LORA_PA_TX_EN);
#endif
LOG_INFO("setup LORA_DIO1 (GPIO%02d) with wakeup by gpio interrupt", LORA_DIO1);
gpio_wakeup_enable((gpio_num_t)LORA_DIO1, GPIO_INTR_HIGH_LEVEL);
LOG_INFO("setup LORA_DIO1 (GPIO%02d) with wakeup by gpio interrupt", LORA_DIO1);
gpio_wakeup_enable((gpio_num_t)LORA_DIO1, GPIO_INTR_HIGH_LEVEL);
#elif defined(LORA_DIO1) && (LORA_DIO1 != RADIOLIB_NC)
if (radioType != RF95_RADIO) {
LOG_INFO("setup LORA_DIO1 (GPIO%02d) with wakeup by gpio interrupt", LORA_DIO1);
gpio_wakeup_enable((gpio_num_t)LORA_DIO1, GPIO_INTR_HIGH_LEVEL); // SX126x/SX128x interrupt, active high
}
if (radioType != RF95_RADIO) {
LOG_INFO("setup LORA_DIO1 (GPIO%02d) with wakeup by gpio interrupt", LORA_DIO1);
gpio_wakeup_enable((gpio_num_t)LORA_DIO1, GPIO_INTR_HIGH_LEVEL); // SX126x/SX128x interrupt, active high
}
#endif
#if defined(RF95_IRQ) && (RF95_IRQ != RADIOLIB_NC)
if (radioType == RF95_RADIO) {
LOG_INFO("setup RF95_IRQ (GPIO%02d) with wakeup by gpio interrupt", RF95_IRQ);
gpio_wakeup_enable((gpio_num_t)RF95_IRQ, GPIO_INTR_HIGH_LEVEL); // RF95 interrupt, active high
}
if (radioType == RF95_RADIO) {
LOG_INFO("setup RF95_IRQ (GPIO%02d) with wakeup by gpio interrupt", RF95_IRQ);
gpio_wakeup_enable((gpio_num_t)RF95_IRQ, GPIO_INTR_HIGH_LEVEL); // RF95 interrupt, active high
}
#endif
}
#endif