rbxii3/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2026-01-08 02:47:35 +00:00
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'master' into apollo

Browse Source
This commit is contained in:
Thomas Göttgens
2024-11-24 15:53:58 +01:00
committed by GitHub
parent b78978156e ad9d7a4972
commit b97ca2c834
94 changed files with 958 additions and 378 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
variants/diy/platformio.ini
View File

@@ -2,6 +2,7 @@
[env:meshtastic-diy-v1]
extends = esp32_base
board = esp32doit-devkit-v1
board_level = extra
board_check = true
build_flags =
${esp32_base.build_flags}

2
variants/dreamcatcher/platformio.ini
View File

@@ -11,7 +11,7 @@ build_flags =
-DARDUINO_USB_CDC_ON_BOOT=1
lib_deps = ${esp32s3_base.lib_deps}
earlephilhower/ESP8266Audio@^1.9.7
earlephilhower/ESP8266Audio@^1.9.9
earlephilhower/ESP8266SAM@^1.0.1
[env:dreamcatcher-2206]

1
variants/dreamcatcher/variant.h
View File

@@ -60,6 +60,7 @@
#define DAC_I2S_BCK 21
#define DAC_I2S_WS 9
#define DAC_I2S_DOUT 48
#define DAC_I2S_MCLK 44
#define BIAS_T_ENABLE 7 // needs to be low
#define BIAS_T_VALUE 0

4
variants/radiomaster_900_bandit/platformio.ini
View File

@@ -6,9 +6,11 @@ build_flags =
-DRADIOMASTER_900_BANDIT
-DVTABLES_IN_FLASH=1
-DCONFIG_DISABLE_HAL_LOCKS=1
-DHAS_STK8XXX=1
-O2
-Ivariants/radiomaster_900_bandit
board_build.f_cpu = 240000000L
upload_protocol = esptool
lib_deps =
${esp32_base.lib_deps}
${esp32_base.lib_deps}
https://github.com/gjelsoe/STK8xxx-Accelerometer.git#v0.1.1

3
variants/rak11310/platformio.ini
View File

@@ -3,6 +3,7 @@ extends = rp2040_base
board = wiscore_rak11300
upload_protocol = picotool
# keep an old SDK to use less memory.
platform = https://github.com/maxgerhardt/platform-raspberrypi.git#v1.2.0-gcc12
platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#3.7.2
# add our variants files to the include and src paths
@@ -13,5 +14,5 @@ build_flags = ${rp2040_base.build_flags}
-L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m0plus"
lib_deps =
${rp2040_base.lib_deps}
debug_build_flags = ${rp2040_base.build_flags}
debug_build_flags = ${rp2040_base.build_flags}, -g
debug_tool = cmsis-dap ; for e.g. Picotool

11
variants/rak_wismeshtap/platformio.ini
View File

@@ -1,17 +1,18 @@
; The very slick RAK wireless RAK10701 Field Tester device. Note you will have to flash to Arduino bootloader to use this firmware. Be aware touch is not currently working.
[env:rak_wismeshtap]
extends = nrf52840_base
board_level = extra
board = wiscore_rak4631
build_flags = ${nrf52840_base.build_flags} -Ivariants/rak_wismeshtap -D RAK_4631
build_flags = ${nrf52840_base.build_flags} -Ivariants/rak_wismeshtap -DWISMESH_TAP -DRAK_4631
-L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard"
-DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
-DEINK_DISPLAY_MODEL=GxEPD2_213_BN
-DEINK_WIDTH=250
-DEINK_HEIGHT=122
-DMESHTASTIC_EXCLUDE_WIFI=1
-DMESHTASTIC_EXCLUDE_EXTERNALNOTIFICATION=1
-DMESHTASTIC_EXCLUDE_WAYPOINT=1
-DMESHTASTIC_EXCLUDE_DETECTIONSENSOR=1
-DMESHTASTIC_EXCLUDE_STOREFORWARD=1
-DMESHTASTIC_EXCLUDE_POWER_TELEMETRY=1
-DMESHTASTIC_EXCLUDE_ATAK=1
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/rak_wismeshtap> +<mesh/eth/> +<mesh/api/> +<mqtt/>
lib_deps =
${nrf52840_base.lib_deps}
@@ -24,4 +25,4 @@ lib_deps =
beegee-tokyo/RAK14014-FT6336U @ 1.0.1
debug_tool = jlink
; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
;upload_protocol = jlink
;upload_protocol = jlink

7
variants/rak_wismeshtap/variant.h
View File

@@ -271,13 +271,8 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
#define HAS_RTC 1
#define HAS_ETHERNET 1
#define RAK_4631 1
#define PIN_ETHERNET_RESET 21
#define PIN_ETHERNET_SS PIN_EINK_CS
#define ETH_SPI_PORT SPI1
#define AQ_SET_PIN 10
#ifdef __cplusplus
@@ -311,7 +306,7 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
#define SCREEN_TOUCH_INT WB_IO6
#define CANNED_MESSAGE_MODULE_ENABLE 1
#define USE_VIRTUAL_KEYBOARD 1
/*----------------------------------------------------------------------------
* Arduino objects - C++ only
*----------------------------------------------------------------------------*/

2
variants/rp2040-lora/platformio.ini
View File

@@ -12,5 +12,5 @@ build_flags = ${rp2040_base.build_flags}
-L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m0plus"
lib_deps =
${rp2040_base.lib_deps}
debug_build_flags = ${rp2040_base.build_flags}
debug_build_flags = ${rp2040_base.build_flags}, -g
debug_tool = cmsis-dap ; for e.g. Picotool

2
variants/rpipico/platformio.ini
View File

@@ -12,5 +12,5 @@ build_flags = ${rp2040_base.build_flags}
-L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m0plus"
lib_deps =
${rp2040_base.lib_deps}
debug_build_flags = ${rp2040_base.build_flags}
debug_build_flags = ${rp2040_base.build_flags}, -g
debug_tool = cmsis-dap ; for e.g. Picotool

2
variants/rpipico2/platformio.ini
View File

@@ -12,5 +12,5 @@ build_flags = ${rp2350_base.build_flags}
-L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m0plus"
lib_deps =
${rp2350_base.lib_deps}
debug_build_flags = ${rp2350_base.build_flags}
debug_build_flags = ${rp2350_base.build_flags}, -g
debug_tool = cmsis-dap ; for e.g. Picotool

2
variants/rpipicow/platformio.ini
View File

@@ -14,5 +14,5 @@ build_src_filter = ${rp2040_base.build_src_filter} +<mesh/wifi/>
lib_deps =
${rp2040_base.lib_deps}
${networking_base.lib_deps}
debug_build_flags = ${rp2040_base.build_flags}
debug_build_flags = ${rp2040_base.build_flags}, -g
debug_tool = cmsis-dap ; for e.g. Picotool

14
variants/seeed-sensecap-indicator/variant.h
View File

@@ -36,12 +36,13 @@
#define TOUCH_I2C_PORT 0
#define TOUCH_SLAVE_ADDRESS 0x48
// Buzzer
#define PIN_BUZZER 19
// in future, we may want to add a buzzer and add all sensors to the indicator via a data protocol for now only GPS is supported
// // Buzzer
// #define PIN_BUZZER 19
#define HAS_GPS 0
#undef GPS_RX_PIN
#undef GPS_TX_PIN
#define GPS_RX_PIN 20
#define GPS_TX_PIN 19
#define HAS_GPS 1
#define USE_SX1262
#define USE_SX1268
@@ -62,3 +63,6 @@
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_DIO2_AS_RF_SWITCH
#define USE_VIRTUAL_KEYBOARD 1
#define DISPLAY_CLOCK_FRAME 1

2
variants/t-deck/platformio.ini
View File

@@ -15,5 +15,5 @@ build_flags = ${esp32_base.build_flags}
lib_deps = ${esp32s3_base.lib_deps}
lovyan03/LovyanGFX@^1.1.9
earlephilhower/ESP8266Audio@^1.9.7
earlephilhower/ESP8266Audio@^1.9.9
earlephilhower/ESP8266SAM@^1.0.1

1
variants/t-deck/variant.h
View File

@@ -73,6 +73,7 @@
#define DAC_I2S_BCK 7
#define DAC_I2S_WS 5
#define DAC_I2S_DOUT 6
#define DAC_I2S_MCLK 21 // GPIO lrck mic
// LoRa
#define USE_SX1262

6
variants/t-watch-s3/platformio.ini
View File

@@ -9,10 +9,12 @@ build_flags = ${esp32_base.build_flags}
-DT_WATCH_S3
-Ivariants/t-watch-s3
-DPCF8563_RTC=0x51
-DHAS_BMA423=1
lib_deps = ${esp32s3_base.lib_deps}
lovyan03/LovyanGFX@^1.1.9
lewisxhe/PCF8563_Library@1.0.1
adafruit/Adafruit DRV2605 Library@^1.2.2
earlephilhower/ESP8266Audio@^1.9.7
earlephilhower/ESP8266SAM@^1.0.1
earlephilhower/ESP8266Audio@^1.9.9
earlephilhower/ESP8266SAM@^1.0.1
lewisxhe/SensorLib@0.2.0

4
variants/t-watch-s3/variant.h
View File

@@ -34,6 +34,7 @@
#define DAC_I2S_BCK 48
#define DAC_I2S_WS 15
#define DAC_I2S_DOUT 46
#define DAC_I2S_MCLK 0
#define HAS_AXP2101
@@ -71,3 +72,6 @@
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
// Internally the TTGO module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for
// the sx1262interface code)
#define USE_VIRTUAL_KEYBOARD 1
#define DISPLAY_CLOCK_FRAME 1